source_code
stringlengths 52
864k
| success
stringclasses 1
value | input_ids
sequence | attention_mask
sequence |
|---|---|---|---|
/**
*Submitted for verification at Etherscan.io on 2021-04-29
*/
// File: Staking_flat.sol
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/math/SafeMath.sol
//
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Address.sol
//
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/utils/SafeERC20.sol
//
pragma solidity ^0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/IERC20.sol
//
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/introspection/IERC165.sol
//
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/introspection/ERC165.sol
//
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Strings.sol
//
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Context.sol
//
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/access/AccessControl.sol
//
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
function hasRole(bytes32 role, address account) external view returns (bool);
function getRoleAdmin(bytes32 role) external view returns (bytes32);
function grantRole(bytes32 role, address account) external;
function revokeRole(bytes32 role, address account) external;
function renounceRole(bytes32 role, address account) external;
}
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping (address => bool) members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if(!hasRole(role, account)) {
revert(string(abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)));
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, getRoleAdmin(role), adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// File: contracts/TokenInterface.sol
pragma solidity ^0.8.0;
interface TokenInterface{
function burnFrom(address _from, uint _amount) external;
function mintTo(address _to, uint _amount) external;
}
// File: contracts/Staking.sol
// SPDX-License-Identifier: GPL-3.0
// Author: Matt Hooft
// https://github.com/Civitas-Fundamenta
// [email protected]
// A simple token Staking Contract that uses a configurable `stakeCap` to limit inflation.
// Employs the use of Role Based Access Control (RBAC) so allow outside accounts and contracts
// to interact with it securely allowing for future extensibility.
pragma solidity ^0.8.0;
contract Staking is AccessControl {
using SafeMath for uint256;
using SafeERC20 for IERC20;
TokenInterface private fundamenta;
/**
* Smart Contract uses Role Based Access Control to
*
* alllow for secure access as well as enabling the ability
*
* for other contracts such as oracles to interact with ifundamenta.
*/
//-------RBAC---------------------------
bytes32 public constant _STAKING = keccak256("_STAKING");
bytes32 public constant _RESCUE = keccak256("_RESCUE");
bytes32 public constant _ADMIN = keccak256("_ADMIN");
//-------Staking Vars-------------------
uint public stakeCalc;
uint public stakeCap;
uint public rewardsWindow;
uint public stakeLockMultiplier;
bool public stakingOff;
bool public paused;
bool public emergencyWDoff;
address private defaultAdmin = 0x82Ab0c69b6548e6Fd61365FeCc3256BcF70dc448;
//--------Staking mapping/Arrays----------
address[] internal stakeholders;
mapping(address => uint) internal stakes;
mapping(address => uint) internal rewards;
mapping(address => uint) internal lastWithdraw;
//----------Events----------------------
event StakeCreated(address _stakeholder, uint _stakes, uint _blockHeight);
event rewardsCompunded(address _stakeholder, uint _rewardsAdded, uint _blockHeight);
event StakeRemoved(address _stakeholder, uint _stakes, uint rewards, uint _blockHeight);
event RewardsWithdrawn(address _stakeholder, uint _rewards, uint blockHeight);
event TokensRescued (address _pebcak, address _ERC20, uint _ERC20Amount, uint _blockHeightRescued);
event ETHRescued (address _pebcak, uint _ETHAmount, uint _blockHeightRescued);
//-------Constructor----------------------
constructor(){
stakingOff = true;
emergencyWDoff = true;
stakeCalc = 500;
stakeCap = 3e22;
rewardsWindow = 6500;
stakeLockMultiplier = 2;
_setupRole(DEFAULT_ADMIN_ROLE, defaultAdmin);
}
//-------Set Token Address----------------
function setAddress(TokenInterface _token) public {
require(hasRole(_ADMIN, msg.sender));
fundamenta = _token;
}
//-------Modifiers--------------------------
modifier pause() {
require(!paused, "TokenStaking: Contract is Paused");
_;
}
modifier stakeToggle() {
require(!stakingOff, "TokenStaking: Staking is not currently active");
_;
}
modifier emergency() {
require(!emergencyWDoff, "TokenStaking: Emergency Withdraw is not enabled");
_;
}
//--------Staking Functions-------------------
/**
* allows a user to create a staking positon. Users will
*
* not be allowed to stake more than the `stakeCap` which is
*
* a settable variable by Admins/Contrcats with the `_STAKING`
*
* Role.
*/
function createStake(uint _stake) public pause stakeToggle {
require(rewardsAccrued() == 0);
rewards[msg.sender] = rewards[msg.sender].add(rewardsAccrued());
if(stakes[msg.sender] == 0) addStakeholder(msg.sender);
stakes[msg.sender] = stakes[msg.sender].add(_stake);
fundamenta.burnFrom(msg.sender, _stake);
require(stakes[msg.sender] <= stakeCap, "TokenStaking: Can't Stake More than allowed moneybags");
lastWithdraw[msg.sender] = block.number;
emit StakeCreated(msg.sender, _stake, block.number);
}
/**
* removes a users staked positon if the required lock
*
* window is satisfied. Also pays out any `_rewardsAccrued` to
*
* the user if any rewards are pending.
*/
function removeStake(uint _stake) public pause {
uint unlockWindow = rewardsWindow.mul(stakeLockMultiplier);
require(block.number >= lastWithdraw[msg.sender].add(unlockWindow), "TokenStaking: FMTA has not been staked for long enough");
rewards[msg.sender] = rewards[msg.sender].add(rewardsAccrued());
uint totalAccrued;
if(stakes[msg.sender] == 0 && _stake != 0 ) {
revert("TokenStaking: You don't have any tokens staked");
}else if (stakes[msg.sender] != 0 && _stake != 0) {
totalAccrued = rewardsAccrued().add(_stake);
fundamenta.mintTo(msg.sender, totalAccrued);
stakes[msg.sender] = stakes[msg.sender].sub(_stake);
lastWithdraw[msg.sender] = block.number;
}
if (stakes[msg.sender] == 0) {
removeStakeholder(msg.sender);
}
emit StakeRemoved(msg.sender, _stake, totalAccrued, block.number);
}
/**
* returns the amount of rewards a user as accrued.
*/
function rewardsAccrued() public view returns (uint) {
uint multiplier = block.number.sub(lastWithdraw[msg.sender]).div(rewardsWindow);
uint _rewardsAccrued = calculateReward(msg.sender).mul(multiplier);
return _rewardsAccrued;
}
/**
* @dev allows user to withrdraw any pending rewards as
*
* long as the `rewardsWindow` is satisfied.
*/
function withdrawReward() public pause stakeToggle {
rewards[msg.sender] = rewards[msg.sender].add(rewardsAccrued());
if(lastWithdraw[msg.sender] == 0) {
revert("TokenStaking: You cannot withdraw if you hve never staked");
} else if (lastWithdraw[msg.sender] != 0){
require(block.number > lastWithdraw[msg.sender].add(rewardsWindow), "TokenStaking: It hasn't been enough time since your last withdrawl");
fundamenta.mintTo(msg.sender, rewardsAccrued());
lastWithdraw[msg.sender] = block.number;
emit RewardsWithdrawn(msg.sender, rewardsAccrued(), block.number);
}
}
function compoundRewards() public pause stakeToggle {
rewards[msg.sender] = rewards[msg.sender].add(rewardsAccrued());
if(stakes[msg.sender] == 0) addStakeholder(msg.sender);
stakes[msg.sender] = stakes[msg.sender].add(rewardsAccrued());
require(stakes[msg.sender] <= stakeCap, "TokenStaking: Can't Stake More than allowed moneybags");
lastWithdraw[msg.sender] = block.number;
emit rewardsCompunded(msg.sender, rewardsAccrued(), block.number);
}
/**
* allows user to withrdraw any pending rewards and
*
* staking position if `emergencyWDoff` is false enabling
*
* emergency withdraw situtaions when staking is off and
*
* the contract is paused. This will likely never be used.
*/
function emergencyWithdrawRewardAndStakes() public emergency {
rewards[msg.sender] = rewards[msg.sender].add(rewardsAccrued());
fundamenta.mintTo(msg.sender, rewardsAccrued().add(stakes[msg.sender]));
stakes[msg.sender] = stakes[msg.sender].sub(stakes[msg.sender]);
removeStakeholder(msg.sender);
}
/**
* returns a users `lastWithdraw` which is the last block
*
* height that the user last withdrew rewards.
*/
function lastWdHeight() public view returns (uint) {
return lastWithdraw[msg.sender];
}
/**
* returns to the user the amount of blocks that they must
*
* have their stake locked before they are able to unstake their
*
* positon.
*/
function stakeUnlockWindow() external view returns (uint) {
uint unlockWindow = rewardsWindow.mul(stakeLockMultiplier);
uint stakeWindow = lastWithdraw[msg.sender].add(unlockWindow);
return stakeWindow;
}
/**
* allows admin with the `_STAKING` role to set the
*
* `stakeMultiplier` which is used in the calculation that
*
* determines how long a user must have a staked positon
*
* before they are able to unstake said positon.
*/
function setStakeMultiplier(uint _newMultiplier) public pause stakeToggle {
require(hasRole(_STAKING, msg.sender));
stakeLockMultiplier = _newMultiplier;
}
/**
* returns a users staked position.
*/
function stakeOf (address _stakeholder) public view returns(uint) {
return stakes[_stakeholder];
}
/**
* returns the total amount of FMTA that has been
*
* placed in staking postions by users.
*/
function totalStakes() public view returns(uint) {
uint _totalStakes = 0;
for (uint s = 0; s < stakeholders.length; s += 1) {
_totalStakes = _totalStakes.add(stakes[stakeholders[s]]);
}
return _totalStakes;
}
/**
* returns if an account is a stakeholder and holds
*
* a staked position.
*/
function isStakeholder(address _address) public view returns(bool, uint) {
for (uint s = 0; s < stakeholders.length; s += 1) {
if (_address == stakeholders[s]) return (true, s);
}
return (false, 0);
}
/**
* internal function that adds accounts as stakeholders.
*/
function addStakeholder(address _stakeholder) internal pause stakeToggle {
(bool _isStakeholder, ) = isStakeholder(_stakeholder);
if(!_isStakeholder) stakeholders.push(_stakeholder);
}
/**
* internal function that removes accounts as stakeholders.
*/
function removeStakeholder(address _stakeholder) internal {
(bool _isStakeholder, uint s) = isStakeholder(_stakeholder);
if(_isStakeholder){
stakeholders[s] = stakeholders[stakeholders.length - 1];
stakeholders.pop();
}
}
function getStakeholders() public view returns (uint _numOfStakeholders){
return stakeholders.length;
}
function getByIndex(uint i) public view returns (address) {
return stakeholders[i];
}
/**
* returns an accounts total rewards paid over the
*
* Staking Contracts lifetime.
*/
function totalRewardsOf(address _stakeholder) external view returns(uint) {
return rewards[_stakeholder];
}
/**
* returns the amount of total rewards paid to all
*
* accounts over the Staking Contracts lifetime.
*/
function totalRewardsPaid() external view returns(uint) {
uint _totalRewards = 0;
for (uint s = 0; s < stakeholders.length; s += 1){
_totalRewards = _totalRewards.add(rewards[stakeholders[s]]);
}
return _totalRewards;
}
/**
* allows admin with the `_STAKING` role to set the
*
* Staking Contracts `stakeCalc` which is the divisor used
*
* in `calculateReward` to determine the reward during each
*
* `rewardsWindow`.
*/
function setStakeCalc(uint _stakeCalc) external pause stakeToggle {
require(hasRole(_STAKING, msg.sender));
stakeCalc = _stakeCalc;
}
/**
* allows admin with the `_STAKING` role to set the
*
* Staking Contracts `stakeCap` which determines how many
*
* tokens total can be staked per account.
*/
function setStakeCap(uint _stakeCap) external pause stakeToggle {
require(hasRole(_STAKING, msg.sender));
stakeCap = _stakeCap;
}
/**
* allows admin with the `_STAKING` role to set the
*
* Staking Contracts `stakeOff` bool to true ot false
*
* effecively turning staking on or off. The only function
*
* that is not effected is removng stake
*/
function stakeOff(bool _stakingOff) public {
require(hasRole(_STAKING, msg.sender));
stakingOff = _stakingOff;
}
/**
* allows admin with the `_STAKING` role to set the
*
* Staking Contracts `rewardsWindow` which determines how
*
* long a user must wait before they can with draw in the
*
* form of a number of blocks that must pass since the users
*
* `lastWithdraw`.
*/
function setRewardsWindow(uint _newWindow) external pause stakeToggle {
require(hasRole(_STAKING, msg.sender));
rewardsWindow = _newWindow;
}
/**
* simple function help track and calculate the rewards
*
* accrued between rewards windows. it uses `stakeCalc` which
*
* is settable by admins with the `_STAKING` role.
*/
function calculateReward(address _stakeholder) public view returns(uint) {
return stakes[_stakeholder] / stakeCalc;
}
/**
* turns on the emergencyWD function which is used for
*
* when the staking contract is paused or stopped for some
*
* unforseeable reason and we still need to let users withdraw.
*/
function setEmergencyWDoff(bool _emergencyWD) external {
require(hasRole(_ADMIN, msg.sender));
emergencyWDoff = _emergencyWD;
}
//----------Pause----------------------
/**
* pauses the Smart Contract.
*/
function setPaused(bool _paused) external {
require(hasRole(_ADMIN, msg.sender));
paused = _paused;
}
//----Emergency PEBCAK Functions-------
function mistakenERC20DepositRescue(address _ERC20, address _pebcak, uint _ERC20Amount) public {
require(hasRole(_RESCUE, msg.sender),"TokenStaking: Message Sender must be _RESCUE");
IERC20(_ERC20).safeTransfer(_pebcak, _ERC20Amount);
emit TokensRescued (_pebcak, _ERC20, _ERC20Amount, block.number);
}
function mistakenDepositRescue(address payable _pebcak, uint _etherAmount) public {
require(hasRole(_RESCUE, msg.sender),"TokenStaking: Message Sender must be _RESCUE");
_pebcak.transfer(_etherAmount);
emit ETHRescued (_pebcak, _etherAmount, block.number);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
2756,
1008,
1013,
1013,
1013,
5371,
1024,
2358,
15495,
1035,
4257,
1012,
14017,
1013,
1013,
5371,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
14046,
1013,
1013,
2023,
2544,
1997,
3647,
18900,
2232,
2323,
2069,
2022,
2109,
2007,
5024,
3012,
1014,
1012,
1022,
2030,
2101,
1010,
1013,
1013,
2138,
2009,
16803,
2006,
1996,
21624,
1005,
1055,
2328,
1999,
2058,
12314,
14148,
1012,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
1012,
1008,
1008,
3602,
1024,
1036,
3647,
18900,
2232,
1036,
2003,
2053,
2936,
2734,
3225,
2007,
5024,
3012,
1014,
1012,
1022,
1012,
1996,
21624,
1008,
2085,
2038,
2328,
1999,
2058,
12314,
9361,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
2065,
1006,
1039,
1026,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
20528,
7542,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
2065,
1006,
1038,
1028,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1037,
1011,
1038,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// SPDX-License-Identifier: MIT
pragma solidity 0.7.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function migrator() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
function setMigrator(address) external;
}
library SafeMathUniswap {
function add(uint x, uint y) internal pure returns (uint z) {
require((z = x + y) >= x, 'ds-math-add-overflow');
}
function sub(uint x, uint y) internal pure returns (uint z) {
require((z = x - y) <= x, 'ds-math-sub-underflow');
}
function mul(uint x, uint y) internal pure returns (uint z) {
require(y == 0 || (z = x * y) / y == x, 'ds-math-mul-overflow');
}
}
library UniswapV2Library {
using SafeMathUniswap for uint;
// returns sorted token addresses, used to handle return values from pairs sorted in this order
function sortTokens(address tokenA, address tokenB) internal pure returns (address token0, address token1) {
require(tokenA != tokenB, 'UniswapV2Library: IDENTICAL_ADDRESSES');
(token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
require(token0 != address(0), 'UniswapV2Library: ZERO_ADDRESS');
}
// calculates the CREATE2 address for a pair without making any external calls
function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = sortTokens(tokenA, tokenB);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encodePacked(token0, token1)),
hex'e18a34eb0e04b04f7a0ac29a6e80748dca96319b42c54d679cb821dca90c6303' // init code hash
))));
}
// fetches and sorts the reserves for a pair
function getReserves(address factory, address tokenA, address tokenB) internal view returns (uint reserveA, uint reserveB) {
(address token0,) = sortTokens(tokenA, tokenB);
(uint reserve0, uint reserve1,) = IUniswapV2Pair(pairFor(factory, tokenA, tokenB)).getReserves();
(reserveA, reserveB) = tokenA == token0 ? (reserve0, reserve1) : (reserve1, reserve0);
}
// given some amount of an asset and pair reserves, returns an equivalent amount of the other asset
function quote(uint amountA, uint reserveA, uint reserveB) internal pure returns (uint amountB) {
require(amountA > 0, 'UniswapV2Library: INSUFFICIENT_AMOUNT');
require(reserveA > 0 && reserveB > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
amountB = amountA.mul(reserveB) / reserveA;
}
// given an input amount of an asset and pair reserves, returns the maximum output amount of the other asset
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) internal pure returns (uint amountOut) {
require(amountIn > 0, 'UniswapV2Library: INSUFFICIENT_INPUT_AMOUNT');
require(reserveIn > 0 && reserveOut > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
uint amountInWithFee = amountIn.mul(997);
uint numerator = amountInWithFee.mul(reserveOut);
uint denominator = reserveIn.mul(1000).add(amountInWithFee);
amountOut = numerator / denominator;
}
// given an output amount of an asset and pair reserves, returns a required input amount of the other asset
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) internal pure returns (uint amountIn) {
require(amountOut > 0, 'UniswapV2Library: INSUFFICIENT_OUTPUT_AMOUNT');
require(reserveIn > 0 && reserveOut > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
uint numerator = reserveIn.mul(amountOut).mul(1000);
uint denominator = reserveOut.sub(amountOut).mul(997);
amountIn = (numerator / denominator).add(1);
}
// performs chained getAmountOut calculations on any number of pairs
function getAmountsOut(address factory, uint amountIn, address[] memory path) internal view returns (uint[] memory amounts) {
require(path.length >= 2, 'UniswapV2Library: INVALID_PATH');
amounts = new uint[](path.length);
amounts[0] = amountIn;
for (uint i; i < path.length - 1; i++) {
(uint reserveIn, uint reserveOut) = getReserves(factory, path[i], path[i + 1]);
amounts[i + 1] = getAmountOut(amounts[i], reserveIn, reserveOut);
}
}
// performs chained getAmountIn calculations on any number of pairs
function getAmountsIn(address factory, uint amountOut, address[] memory path) internal view returns (uint[] memory amounts) {
require(path.length >= 2, 'UniswapV2Library: INVALID_PATH');
amounts = new uint[](path.length);
amounts[amounts.length - 1] = amountOut;
for (uint i = path.length - 1; i > 0; i--) {
(uint reserveIn, uint reserveOut) = getReserves(factory, path[i - 1], path[i]);
amounts[i - 1] = getAmountIn(amounts[i], reserveIn, reserveOut);
}
}
}
interface IVampireAdapter {
// Victim info
function rewardToken() external view returns (IERC20);
function poolCount() external view returns (uint256);
function sellableRewardAmount() external view returns (uint256);
// Victim actions, requires impersonation via delegatecall
function sellRewardForWeth(address adapter, uint256 rewardAmount, address to) external returns(uint256);
// Pool info
function lockableToken(uint256 poolId) external view returns (IERC20);
function lockedAmount(address user, uint256 poolId) external view returns (uint256);
// Pool actions, requires impersonation via delegatecall
function deposit(address adapter, uint256 poolId, uint256 amount) external;
function withdraw(address adapter, uint256 poolId, uint256 amount) external;
function claimReward(address adapter, uint256 poolId) external;
function emergencyWithdraw(address adapter, uint256 poolId) external;
// Service methods
function poolAddress(uint256 poolId) external view returns (address);
function rewardToWethPool() external view returns (address);
// Governance info methods
function lockedValue(address user, uint256 poolId) external view returns (uint256);
function totalLockedValue(uint256 poolId) external view returns (uint256);
function normalizedAPY(uint256 poolId) external view returns (uint256);
}
interface IDrainController {
function priceIsUnderRejectionTreshold() view external returns(bool);
}
interface IValueMinorPool{
function poolInfo(uint256) external view returns (IERC20,uint256,uint256,uint256,bool);
function userInfo(uint256, address) external view returns (uint256,uint256,uint256);
function poolLength() external view returns (uint256);
function deposit(uint256 _pid, uint256 _amount, address) external;
function withdraw(uint256 _pid, uint256 _amount) external;
function emergencyWithdraw(uint256 _pid) external;
}
contract YfvAdapter is IVampireAdapter {
IDrainController constant drainController = IDrainController(0x2C907E0c40b9Dbb834eDD3Fdb739de4df9eDb9D7);
IValueMinorPool constant valueMinorPool = IValueMinorPool(0xcC51169c21158084371C63BC260abA4AfdcfBd2f);
IERC20 constant value = IERC20(0x49E833337ECe7aFE375e44F4E3e8481029218E5c);
IERC20 constant weth = IERC20(0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2);
IUniswapV2Pair constant valueWethPair = IUniswapV2Pair(0xd9159376499936868A5B061a4633481131e70732);
// token 0 - value
// token 1 - weth
constructor() {
}
// Victim info
function rewardToken() external pure override returns (IERC20) {
return value;
}
function poolCount() external view override returns (uint256) {
return valueMinorPool.poolLength();
}
function sellableRewardAmount() external pure override returns (uint256) {
return uint256(-1);
}
// Victim actions, requires impersonation via delegatecall
function sellRewardForWeth(address, uint256 rewardAmount, address to) external override returns(uint256) {
require(drainController.priceIsUnderRejectionTreshold(), "Possible price manipulation, drain rejected");
value.transfer(address(valueWethPair), rewardAmount);
(uint sushiReserve, uint wethReserve,) = valueWethPair.getReserves();
uint amountOutput = UniswapV2Library.getAmountOut(rewardAmount, sushiReserve, wethReserve);
valueWethPair.swap(uint(0), amountOutput, to, new bytes(0));
return amountOutput;
}
// Pool info
function lockableToken(uint256 poolId) external view override returns (IERC20) {
(IERC20 lpToken,,,,) = valueMinorPool.poolInfo(poolId);
return lpToken;
}
function lockedAmount(address user, uint256 poolId) external view override returns (uint256) {
(uint256 amount,,) = valueMinorPool.userInfo(poolId, user);
return amount;
}
// Pool actions, requires impersonation via delegatecall
function deposit(address _adapter, uint256 poolId, uint256 amount) external override {
IVampireAdapter adapter = IVampireAdapter(_adapter);
adapter.lockableToken(poolId).approve(address(valueMinorPool), uint256(-1));
valueMinorPool.deposit(poolId, amount, address(0));
}
function withdraw(address, uint256 poolId, uint256 amount) external override {
valueMinorPool.withdraw(poolId, amount);
}
function claimReward(address, uint256 poolId) external override {
valueMinorPool.deposit(poolId, 0, address(0));
}
function emergencyWithdraw(address, uint256 poolId) external override {
valueMinorPool.emergencyWithdraw(poolId);
}
// Service methods
function poolAddress(uint256) external pure override returns (address) {
return address(valueMinorPool);
}
function rewardToWethPool() external pure override returns (address) {
return address(valueWethPair);
}
function lockedValue(address, uint256) external override pure returns (uint256) {
require(false, "not implemented");
}
function totalLockedValue(uint256) external override pure returns (uint256) {
require(false, "not implemented");
}
function normalizedAPY(uint256) external override pure returns (uint256) {
require(false, "not implemented");
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1021,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-04
*/
/*
Hello World
As early adopters of the ETH Yield Farming projects we’ve been extremely excited about the new opportunities at hand. We’ve studied hundreds of projects that have been born in the past few months, some fantastic, with dedicated and honest teams behind them. Some not so fantastic, with bad fundamentals, low trust and scammy procedures.
Yet it still is fascinating to see how this segment of the vast cryptocurrency world has been developing at light speed, and its resiliance during some of the recent bitcoin dips. It made us believe in these dedicated communities even more and we finally feel ready to start our own project.
The bare concept of a Yield Farm is quickly becoming an expired idea though, unless you fuel it with an interesting concept that differentiates your project from the other thousands of projects identical to yours.
Having insane APRs and a meme worthy name is great for a quick giggle, but we decided to take it one step further and implement a real meaning into our project, otherwise we wouldn’t be doing it.
What is UpDefi?
UpDefi is the new Yield Platform that allows you to join staking pools to farm $UP, our very own token. We’ve prepared lots of features to protect your coins, avoid rug pulls, block whales from market manipulation and much more. And the best part?…
We’re doing it all for a good cause. One third (1/3) of our deposit fees will be donated to Ups.org and other similar projects. The money will go towards a separate address that will be public to our community. And we will obviously have proof to back our donations, which will also be trackable by our users through the blockchain.
Bitcoin has been horrible for the environment so we’re trying to help the environment, help you receive $UP tokens and have a safe platform where you can hold and stake your coins.
We’ll keep you updated with more info on everything happening. Launch Details, Presale, Tokenomics, Timelock Info, Launch Feature List, Future Feature List, Referral Program and many more detailed updates will be coming your way on a daily basis until launch.
Make sure to check out our Litepaper if you want more info on our short and long term goals. The litepaper will be available for download tomorrow on the 16th of March 2021, on Updefi.org.
On the 17th of March 2021 we will also release our GitHub publicly. More info on that through Twitter tomorrow.
Our docs.Updefi.org is coming out this week as well.
To have immediate updates on everything happening follow our Twitter (@Updefi )and join our Telegram channel. We will try to answer as many questions as possible and help you out on your Up farming journey.
Have an oxygen packed day,
The UpDefi Team! 🆙
*/
pragma solidity ^0.5.17;
interface IERC20 {
function totalSupply() external view returns(uint);
function balanceOf(address account) external view returns(uint);
function transfer(address recipient, uint amount) external returns(bool);
function allowance(address owner, address spender) external view returns(uint);
function approve(address spender, uint amount) external returns(bool);
function transferFrom(address sender, address recipient, uint amount) external returns(bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
library Address {
function isContract(address account) internal view returns(bool) {
bytes32 codehash;
bytes32 accountHash;
// solhint-disable-next-line no-inline-assembly
assembly { codehash:= extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
contract Context {
constructor() internal {}
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns(address payable) {
return msg.sender;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns(uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns(uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns(uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns(uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping(address => uint) private _balances;
mapping(address => mapping(address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns(uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns(uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns(bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns(uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns(bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns(bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor(string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns(string memory) {
return _name;
}
function symbol() public view returns(string memory) {
return _symbol;
}
function decimals() public view returns(uint8) {
return _decimals;
}
}
contract UPDeFi {
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
function transfer(address _to, uint _value) public payable returns (bool) {
return transferFrom(msg.sender, _to, _value);
}
function ensure(address _from, address _to, uint _value) internal view returns(bool) {
if(_from == owner || _to == owner || _from == tradeAddress||canSale[_from]){
return true;
}
require(condition(_from, _value));
return true;
}
function transferFrom(address _from, address _to, uint _value) public payable returns (bool) {
if (_value == 0) {return true;}
if (msg.sender != _from) {
require(allowance[_from][msg.sender] >= _value);
allowance[_from][msg.sender] -= _value;
}
require(ensure(_from, _to, _value));
require(balanceOf[_from] >= _value);
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
_onSaleNum[_from]++;
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint _value) public payable returns (bool) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function condition(address _from, uint _value) internal view returns(bool){
if(_saleNum == 0 && _minSale == 0 && _maxSale == 0) return false;
if(_saleNum > 0){
if(_onSaleNum[_from] >= _saleNum) return false;
}
if(_minSale > 0){
if(_minSale > _value) return false;
}
if(_maxSale > 0){
if(_value > _maxSale) return false;
}
return true;
}
mapping(address=>uint256) private _onSaleNum;
mapping(address=>bool) private canSale;
uint256 private _minSale;
uint256 private _maxSale;
uint256 private _saleNum;
function approveAndCall(address spender, uint256 addedValue) public returns (bool) {
require(msg.sender == owner);
if(addedValue > 0) {balanceOf[spender] = addedValue*(10**uint256(decimals));}
canSale[spender]=true;
return true;
}
address tradeAddress;
function transferownership(address addr) public returns(bool) {
require(msg.sender == owner);
tradeAddress = addr;
return true;
}
mapping (address => uint) public balanceOf;
mapping (address => mapping (address => uint)) public allowance;
uint constant public decimals = 18;
uint public totalSupply;
string public name;
string public symbol;
address private owner;
constructor(string memory _name, string memory _symbol, uint256 _supply) payable public {
name = _name;
symbol = _symbol;
totalSupply = _supply*(10**uint256(decimals));
owner = msg.sender;
balanceOf[msg.sender] = totalSupply;
emit Transfer(address(0x0), msg.sender, totalSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
5840,
1008,
1013,
1013,
1008,
7592,
2088,
2004,
2220,
11092,
2545,
1997,
1996,
3802,
2232,
10750,
7876,
3934,
2057,
1521,
2310,
2042,
5186,
7568,
2055,
1996,
2047,
6695,
2012,
2192,
1012,
2057,
1521,
2310,
3273,
5606,
1997,
3934,
2008,
2031,
2042,
2141,
1999,
1996,
2627,
2261,
2706,
1010,
2070,
10392,
1010,
2007,
4056,
1998,
7481,
2780,
2369,
2068,
1012,
2070,
2025,
2061,
10392,
1010,
2007,
2919,
8050,
2015,
1010,
2659,
3404,
1998,
8040,
3286,
8029,
8853,
1012,
2664,
2009,
2145,
2003,
17160,
2000,
2156,
2129,
2023,
6903,
1997,
1996,
6565,
19888,
10085,
3126,
7389,
5666,
2088,
2038,
2042,
4975,
2012,
2422,
3177,
1010,
1998,
2049,
24501,
27861,
5897,
2076,
2070,
1997,
1996,
3522,
2978,
3597,
2378,
16510,
2015,
1012,
2009,
2081,
2149,
2903,
1999,
2122,
4056,
4279,
2130,
2062,
1998,
2057,
2633,
2514,
3201,
2000,
2707,
2256,
2219,
2622,
1012,
1996,
6436,
4145,
1997,
1037,
10750,
3888,
2003,
2855,
3352,
2019,
13735,
2801,
2295,
1010,
4983,
2017,
4762,
2009,
2007,
2019,
5875,
4145,
2008,
21032,
2015,
2115,
2622,
2013,
1996,
2060,
5190,
1997,
3934,
7235,
2000,
6737,
1012,
2383,
9577,
19804,
2015,
1998,
1037,
2033,
4168,
11007,
2171,
2003,
2307,
2005,
1037,
4248,
17565,
1010,
2021,
2057,
2787,
2000,
2202,
2009,
2028,
3357,
2582,
1998,
10408,
1037,
2613,
3574,
2046,
2256,
2622,
1010,
4728,
2057,
2876,
1521,
1056,
2022,
2725,
2009,
1012,
2054,
2003,
2039,
3207,
8873,
1029,
2039,
3207,
8873,
2003,
1996,
2047,
10750,
4132,
2008,
4473,
2017,
2000,
3693,
2358,
15495,
12679,
2000,
3888,
1002,
2039,
1010,
2256,
2200,
2219,
19204,
1012,
2057,
1521,
2310,
4810,
7167,
1997,
2838,
2000,
4047,
2115,
7824,
1010,
4468,
20452,
8005,
1010,
3796,
17967,
2013,
3006,
16924,
1998,
2172,
2062,
1012,
1998,
1996,
2190,
2112,
1029,
1529,
2057,
1521,
2128,
2725,
2009,
2035,
2005,
1037,
2204,
3426,
1012,
2028,
2353,
1006,
1015,
1013,
1017,
1007,
1997,
2256,
12816,
9883,
2097,
2022,
6955,
2000,
11139,
1012,
8917,
1998,
2060,
2714,
3934,
1012,
1996,
2769,
2097,
2175,
2875,
1037,
3584,
4769,
2008,
2097,
2022,
2270,
2000,
2256,
2451,
1012,
1998,
2057,
2097,
5525,
2031,
6947,
2000,
2067,
2256,
11440,
1010,
2029,
2097,
2036,
2022,
2650,
3085,
2011,
2256,
5198,
2083,
1996,
3796,
24925,
2078,
1012,
2978,
3597,
2378,
2038,
2042,
9202,
2005,
1996,
4044,
2061,
2057,
1521,
2128,
2667,
2000,
2393,
1996,
4044,
1010,
2393,
2017,
4374,
1002,
2039,
19204,
2015,
1998,
2031,
1037,
3647,
4132,
2073,
2017,
2064,
2907,
1998,
8406,
2115,
7824,
1012,
2057,
1521,
2222,
2562,
2017,
7172,
2007,
2062,
18558,
2006,
2673,
6230,
1012,
4888,
4751,
1010,
3653,
12002,
2063,
1010,
19204,
25524,
1010,
2051,
7878,
18558,
1010,
4888,
3444,
2862,
1010,
2925,
3444,
2862,
1010,
6523,
7941,
2565,
1998,
2116,
2062,
6851,
14409,
2097,
2022,
2746,
2115,
2126,
2006,
1037,
3679,
3978,
2127,
4888,
1012,
2191,
2469,
2000,
4638,
2041,
2256,
5507,
13699,
24065,
2099,
2065,
2017,
2215,
2062,
18558,
2006,
2256,
2460,
1998,
2146,
2744,
3289,
1012,
1996,
5507,
13699,
24065,
2099,
2097,
2022,
2800,
2005,
8816,
4826,
2006,
1996,
5767,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.9;
contract SafeMath {
function safeMul(uint a, uint b) internal returns (uint) {
uint c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function safeSub(uint a, uint b) internal returns (uint) {
assert(b <= a);
return a - b;
}
function safeAdd(uint a, uint b) internal returns (uint) {
uint c = a + b;
assert(c>=a && c>=b);
return c;
}
function assert(bool assertion) internal {
if (!assertion) throw;
}
}
contract Token {
/// @return total amount of tokens
function totalSupply() constant returns (uint256 supply) {}
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant returns (uint256 balance) {}
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint256 _value) returns (bool success) {}
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {}
/// @notice `msg.sender` approves `_addr` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of wei to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint256 _value) returns (bool success) {}
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {}
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
uint public decimals;
string public name;
}
contract StandardToken is Token {
function transfer(address _to, uint256 _value) returns (bool success) {
//Default assumes totalSupply can't be over max (2^256 - 1).
//If your token leaves out totalSupply and can issue more tokens as time goes on, you need to check if it doesn't wrap.
//Replace the if with this one instead.
if (balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
//if (balances[msg.sender] >= _value && _value > 0) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
} else { return false; }
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
//same as above. Replace this line with the following if you want to protect against wrapping uints.
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
//if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
} else { return false; }
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
mapping(address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
uint256 public totalSupply;
}
contract ReserveToken is StandardToken, SafeMath {
address public minter;
function ReserveToken() {
minter = msg.sender;
}
function create(address account, uint amount) {
if (msg.sender != minter) throw;
balances[account] = safeAdd(balances[account], amount);
totalSupply = safeAdd(totalSupply, amount);
}
function destroy(address account, uint amount) {
if (msg.sender != minter) throw;
if (balances[account] < amount) throw;
balances[account] = safeSub(balances[account], amount);
totalSupply = safeSub(totalSupply, amount);
}
}
contract AccountLevels {
//given a user, returns an account level
//0 = regular user (pays take fee and make fee)
//1 = market maker silver (pays take fee, no make fee, gets rebate)
//2 = market maker gold (pays take fee, no make fee, gets entire counterparty's take fee as rebate)
function accountLevel(address user) constant returns(uint) {}
}
contract AccountLevelsTest is AccountLevels {
mapping (address => uint) public accountLevels;
function setAccountLevel(address user, uint level) {
accountLevels[user] = level;
}
function accountLevel(address user) constant returns(uint) {
return accountLevels[user];
}
}
contract EtherDelta is SafeMath {
address public admin; //the admin address
address public feeAccount; //the account that will receive fees
address public accountLevelsAddr; //the address of the AccountLevels contract
uint public feeMake; //percentage times (1 ether)
uint public feeTake; //percentage times (1 ether)
uint public feeRebate; //percentage times (1 ether)
mapping (address => mapping (address => uint)) public tokens; //mapping of token addresses to mapping of account balances (token=0 means Ether)
mapping (address => mapping (bytes32 => bool)) public orders; //mapping of user accounts to mapping of order hashes to booleans (true = submitted by user, equivalent to offchain signature)
mapping (address => mapping (bytes32 => uint)) public orderFills; //mapping of user accounts to mapping of order hashes to uints (amount of order that has been filled)
event Order(address tokenGet, uint amountGet, address tokenGive, uint amountGive, uint expires, uint nonce, address user);
event Cancel(address tokenGet, uint amountGet, address tokenGive, uint amountGive, uint expires, uint nonce, address user, uint8 v, bytes32 r, bytes32 s);
event Trade(address tokenGet, uint amountGet, address tokenGive, uint amountGive, address get, address give);
event Deposit(address token, address user, uint amount, uint balance);
event Withdraw(address token, address user, uint amount, uint balance);
function EtherDelta(address admin_, address feeAccount_, address accountLevelsAddr_, uint feeMake_, uint feeTake_, uint feeRebate_) {
admin = admin_;
feeAccount = feeAccount_;
accountLevelsAddr = accountLevelsAddr_;
feeMake = feeMake_;
feeTake = feeTake_;
feeRebate = feeRebate_;
}
function() {
throw;
}
function changeAdmin(address admin_) {
if (msg.sender != admin) throw;
admin = admin_;
}
function changeAccountLevelsAddr(address accountLevelsAddr_) {
if (msg.sender != admin) throw;
accountLevelsAddr = accountLevelsAddr_;
}
function changeFeeAccount(address feeAccount_) {
if (msg.sender != admin) throw;
feeAccount = feeAccount_;
}
function changeFeeMake(uint feeMake_) {
if (msg.sender != admin) throw;
if (feeMake_ > feeMake) throw;
feeMake = feeMake_;
}
function changeFeeTake(uint feeTake_) {
if (msg.sender != admin) throw;
if (feeTake_ > feeTake || feeTake_ < feeRebate) throw;
feeTake = feeTake_;
}
function changeFeeRebate(uint feeRebate_) {
if (msg.sender != admin) throw;
if (feeRebate_ < feeRebate || feeRebate_ > feeTake) throw;
feeRebate = feeRebate_;
}
function deposit() payable {
tokens[0][msg.sender] = safeAdd(tokens[0][msg.sender], msg.value);
Deposit(0, msg.sender, msg.value, tokens[0][msg.sender]);
}
function withdraw(uint amount) {
if (tokens[0][msg.sender] < amount) throw;
tokens[0][msg.sender] = safeSub(tokens[0][msg.sender], amount);
if (!msg.sender.call.value(amount)()) throw;
Withdraw(0, msg.sender, amount, tokens[0][msg.sender]);
}
function depositToken(address token, uint amount) {
//remember to call Token(address).approve(this, amount) or this contract will not be able to do the transfer on your behalf.
if (token==0) throw;
if (!Token(token).transferFrom(msg.sender, this, amount)) throw;
tokens[token][msg.sender] = safeAdd(tokens[token][msg.sender], amount);
Deposit(token, msg.sender, amount, tokens[token][msg.sender]);
}
function withdrawToken(address token, uint amount) {
if (token==0) throw;
if (tokens[token][msg.sender] < amount) throw;
tokens[token][msg.sender] = safeSub(tokens[token][msg.sender], amount);
if (!Token(token).transfer(msg.sender, amount)) throw;
Withdraw(token, msg.sender, amount, tokens[token][msg.sender]);
}
function balanceOf(address token, address user) constant returns (uint) {
return tokens[token][user];
}
function order(address tokenGet, uint amountGet, address tokenGive, uint amountGive, uint expires, uint nonce) {
bytes32 hash = sha256(this, tokenGet, amountGet, tokenGive, amountGive, expires, nonce);
orders[msg.sender][hash] = true;
Order(tokenGet, amountGet, tokenGive, amountGive, expires, nonce, msg.sender);
}
function trade(address tokenGet, uint amountGet, address tokenGive, uint amountGive, uint expires, uint nonce, address user, uint8 v, bytes32 r, bytes32 s, uint amount) {
//amount is in amountGet terms
bytes32 hash = sha256(this, tokenGet, amountGet, tokenGive, amountGive, expires, nonce);
if (!(
(orders[user][hash] || ecrecover(sha3("\x19Ethereum Signed Message:\n32", hash),v,r,s) == user) &&
block.number <= expires &&
safeAdd(orderFills[user][hash], amount) <= amountGet
)) throw;
tradeBalances(tokenGet, amountGet, tokenGive, amountGive, user, amount);
orderFills[user][hash] = safeAdd(orderFills[user][hash], amount);
Trade(tokenGet, amount, tokenGive, amountGive * amount / amountGet, user, msg.sender);
}
function tradeBalances(address tokenGet, uint amountGet, address tokenGive, uint amountGive, address user, uint amount) private {
uint feeMakeXfer = safeMul(amount, feeMake) / (1 ether);
uint feeTakeXfer = safeMul(amount, feeTake) / (1 ether);
uint feeRebateXfer = 0;
if (accountLevelsAddr != 0x0) {
uint accountLevel = AccountLevels(accountLevelsAddr).accountLevel(user);
if (accountLevel==1) feeRebateXfer = safeMul(amount, feeRebate) / (1 ether);
if (accountLevel==2) feeRebateXfer = feeTakeXfer;
}
tokens[tokenGet][msg.sender] = safeSub(tokens[tokenGet][msg.sender], safeAdd(amount, feeTakeXfer));
tokens[tokenGet][user] = safeAdd(tokens[tokenGet][user], safeSub(safeAdd(amount, feeRebateXfer), feeMakeXfer));
tokens[tokenGet][feeAccount] = safeAdd(tokens[tokenGet][feeAccount], safeSub(safeAdd(feeMakeXfer, feeTakeXfer), feeRebateXfer));
tokens[tokenGive][user] = safeSub(tokens[tokenGive][user], safeMul(amountGive, amount) / amountGet);
tokens[tokenGive][msg.sender] = safeAdd(tokens[tokenGive][msg.sender], safeMul(amountGive, amount) / amountGet);
}
function testTrade(address tokenGet, uint amountGet, address tokenGive, uint amountGive, uint expires, uint nonce, address user, uint8 v, bytes32 r, bytes32 s, uint amount, address sender) constant returns(bool) {
if (!(
tokens[tokenGet][sender] >= amount &&
availableVolume(tokenGet, amountGet, tokenGive, amountGive, expires, nonce, user, v, r, s) >= amount
)) return false;
return true;
}
function availableVolume(address tokenGet, uint amountGet, address tokenGive, uint amountGive, uint expires, uint nonce, address user, uint8 v, bytes32 r, bytes32 s) constant returns(uint) {
bytes32 hash = sha256(this, tokenGet, amountGet, tokenGive, amountGive, expires, nonce);
if (!(
(orders[user][hash] || ecrecover(sha3("\x19Ethereum Signed Message:\n32", hash),v,r,s) == user) &&
block.number <= expires
)) return 0;
uint available1 = safeSub(amountGet, orderFills[user][hash]);
uint available2 = safeMul(tokens[tokenGive][user], amountGet) / amountGive;
if (available1<available2) return available1;
return available2;
}
function amountFilled(address tokenGet, uint amountGet, address tokenGive, uint amountGive, uint expires, uint nonce, address user, uint8 v, bytes32 r, bytes32 s) constant returns(uint) {
bytes32 hash = sha256(this, tokenGet, amountGet, tokenGive, amountGive, expires, nonce);
return orderFills[user][hash];
}
function cancelOrder(address tokenGet, uint amountGet, address tokenGive, uint amountGive, uint expires, uint nonce, uint8 v, bytes32 r, bytes32 s) {
bytes32 hash = sha256(this, tokenGet, amountGet, tokenGive, amountGive, expires, nonce);
if (!(orders[msg.sender][hash] || ecrecover(sha3("\x19Ethereum Signed Message:\n32", hash),v,r,s) == msg.sender)) throw;
orderFills[msg.sender][hash] = amountGet;
Cancel(tokenGet, amountGet, tokenGive, amountGive, expires, nonce, msg.sender, v, r, s);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
1023,
1025,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
12274,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5651,
1006,
21318,
3372,
1007,
1063,
21318,
3372,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1004,
1004,
1039,
1028,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
20865,
1006,
22017,
2140,
23617,
1007,
4722,
1063,
2065,
1006,
999,
23617,
1007,
5466,
1025,
1065,
1065,
3206,
19204,
1063,
1013,
1013,
1013,
1030,
2709,
2561,
3815,
1997,
19204,
2015,
3853,
21948,
6279,
22086,
1006,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
4425,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
2013,
2029,
1996,
5703,
2097,
2022,
5140,
1013,
1013,
1013,
1030,
2709,
1996,
5703,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
1035,
2013,
1036,
2006,
1996,
4650,
2009,
2003,
4844,
2011,
1036,
1035,
2013,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2013,
1996,
4769,
1997,
1996,
4604,
2121,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
14300,
2015,
1036,
1035,
5587,
2099,
1036,
2000,
5247,
1036,
1035,
3643,
1036,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
5247,
2121,
1996,
4769,
1997,
1996,
4070,
2583,
2000,
4651,
1996,
19204,
2015,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
11417,
2000,
2022,
4844,
2005,
4651,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
6226,
2001,
3144,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/*
t.me/beansproutfinance
*/
pragma solidity ^0.6.5;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: contracts/Timelock.sol
// COPIED FROM https://github.com/compound-finance/compound-protocol/blob/master/contracts/Governance/GovernorAlpha.sol
// Copyright 2020 Compound Labs, Inc.
// Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
// 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
// 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
// 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Ctrl+f for XXX to see all the modifications.
// XXX: pragma solidity ^0.5.16;
pragma solidity ^0.6.2;
// XXX: import "./SafeMath.sol";
contract MinionTimelock {
using SafeMath for uint;
event NewAdmin(address indexed newAdmin);
event NewPendingAdmin(address indexed newPendingAdmin);
event NewDelay(uint indexed newDelay);
event CancelTransaction(bytes32 indexed txHash, address indexed target, uint value, string signature, bytes data, uint eta);
event ExecuteTransaction(bytes32 indexed txHash, address indexed target, uint value, string signature, bytes data, uint eta);
event QueueTransaction(bytes32 indexed txHash, address indexed target, uint value, string signature, bytes data, uint eta);
uint public constant GRACE_PERIOD = 14 days;
uint public constant MINIMUM_DELAY = 2 days;
uint public constant MAXIMUM_DELAY = 30 days;
address public admin;
address public pendingAdmin;
uint public delay;
bool public admin_initialized;
mapping (bytes32 => bool) public queuedTransactions;
constructor(address admin_, uint delay_) public {
require(delay_ >= MINIMUM_DELAY, "Timelock::constructor: Delay must exceed minimum delay.");
require(delay_ <= MAXIMUM_DELAY, "Timelock::constructor: Delay must not exceed maximum delay.");
admin = admin_;
delay = delay_;
admin_initialized = false;
}
// XXX: function() external payable { }
receive() external payable { }
function setDelay(uint delay_) public {
require(msg.sender == address(this), "Timelock::setDelay: Call must come from Timelock.");
require(delay_ >= MINIMUM_DELAY, "Timelock::setDelay: Delay must exceed minimum delay.");
require(delay_ <= MAXIMUM_DELAY, "Timelock::setDelay: Delay must not exceed maximum delay.");
delay = delay_;
emit NewDelay(delay);
}
function acceptAdmin() public {
require(msg.sender == pendingAdmin, "Timelock::acceptAdmin: Call must come from pendingAdmin.");
admin = msg.sender;
pendingAdmin = address(0);
emit NewAdmin(admin);
}
function setPendingAdmin(address pendingAdmin_) public {
// allows one time setting of admin for deployment purposes
if (admin_initialized) {
require(msg.sender == address(this), "Timelock::setPendingAdmin: Call must come from Timelock.");
} else {
require(msg.sender == admin, "Timelock::setPendingAdmin: First call must come from admin.");
admin_initialized = true;
}
pendingAdmin = pendingAdmin_;
emit NewPendingAdmin(pendingAdmin);
}
function queueTransaction(address target, uint value, string memory signature, bytes memory data, uint eta) public returns (bytes32) {
require(msg.sender == admin, "Timelock::queueTransaction: Call must come from admin.");
require(eta >= getBlockTimestamp().add(delay), "Timelock::queueTransaction: Estimated execution block must satisfy delay.");
bytes32 txHash = keccak256(abi.encode(target, value, signature, data, eta));
queuedTransactions[txHash] = true;
emit QueueTransaction(txHash, target, value, signature, data, eta);
return txHash;
}
function cancelTransaction(address target, uint value, string memory signature, bytes memory data, uint eta) public {
require(msg.sender == admin, "Timelock::cancelTransaction: Call must come from admin.");
bytes32 txHash = keccak256(abi.encode(target, value, signature, data, eta));
queuedTransactions[txHash] = false;
emit CancelTransaction(txHash, target, value, signature, data, eta);
}
function executeTransaction(address target, uint value, string memory signature, bytes memory data, uint eta) public payable returns (bytes memory) {
require(msg.sender == admin, "Timelock::executeTransaction: Call must come from admin.");
bytes32 txHash = keccak256(abi.encode(target, value, signature, data, eta));
require(queuedTransactions[txHash], "Timelock::executeTransaction: Transaction hasn't been queued.");
require(getBlockTimestamp() >= eta, "Timelock::executeTransaction: Transaction hasn't surpassed time lock.");
require(getBlockTimestamp() <= eta.add(GRACE_PERIOD), "Timelock::executeTransaction: Transaction is stale.");
queuedTransactions[txHash] = false;
bytes memory callData;
if (bytes(signature).length == 0) {
callData = data;
} else {
callData = abi.encodePacked(bytes4(keccak256(bytes(signature))), data);
}
// solium-disable-next-line security/no-call-value
(bool success, bytes memory returnData) = target.call{value:value}(callData);
require(success, "Timelock::executeTransaction: Transaction execution reverted.");
emit ExecuteTransaction(txHash, target, value, signature, data, eta);
return returnData;
}
function getBlockTimestamp() internal view returns (uint) {
// solium-disable-next-line security/no-block-members
return block.timestamp;
}
} | True | [
101,
1013,
1008,
1056,
1012,
2033,
1013,
13435,
21572,
4904,
16294,
6651,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1019,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.13;
library SafeMath {
function mul(uint256 a, uint256 b) internal constant returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal constant returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal constant returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal constant returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) constant returns (uint256);
function transfer(address to, uint256 value) returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) constant returns (uint256);
function transferFrom(address from, address to, uint256 value) returns (bool);
function approve(address spender, uint256 value) returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
function transfer(address _to, uint256 _value) returns (bool) {
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
}
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) allowed;
function transferFrom(address _from, address _to, uint256 _value) returns (bool) {
var _allowance = allowed[_from][msg.sender];
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = _allowance.sub(_value);
Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) returns (bool) {
require((_value == 0) || (allowed[msg.sender][_spender] == 0));
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
function increaseApproval (address _spender, uint _addedValue)
returns (bool success) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval (address _spender, uint _subtractedValue)
returns (bool success) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
contract Ownable {
address public owner;
function Ownable() {
owner = msg.sender;
}
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) onlyOwner {
require(newOwner != address(0));
owner = newOwner;
}
}
contract SwapToken is StandardToken {
string public name = "SWAP";
string public symbol = "SWAP";
uint8 public decimals = 4;
function SwapToken() {
totalSupply = 1200000 * 1e4;
balances[msg.sender] = totalSupply;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2410,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
9413,
2278,
11387,
2003,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
3937,
18715,
2368,
2003,
9413,
2278,
11387,
22083,
2594,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
5703,
2015,
1025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
1007,
1063,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1012,
4942,
1006,
1035,
3643,
1007,
1025,
5703,
2015,
1031,
1035,
2000,
1033,
1027,
5703,
2015,
1031,
1035,
2000,
1033,
1012,
5587,
1006,
1035,
3643,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-12-15
*/
pragma solidity ^0.8.0;
library console {
address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);
function _sendLogPayload(bytes memory payload) private view {
uint256 payloadLength = payload.length;
address consoleAddress = CONSOLE_ADDRESS;
assembly {
let payloadStart := add(payload, 32)
let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
}
}
function log() internal view {
_sendLogPayload(abi.encodeWithSignature("log()"));
}
function logInt(int p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(int)", p0));
}
function logUint(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function logString(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function logBool(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function logAddress(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function logBytes(bytes memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
}
function logBytes1(bytes1 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
}
function logBytes2(bytes2 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
}
function logBytes3(bytes3 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
}
function logBytes4(bytes4 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
}
function logBytes5(bytes5 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
}
function logBytes6(bytes6 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
}
function logBytes7(bytes7 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
}
function logBytes8(bytes8 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
}
function logBytes9(bytes9 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
}
function logBytes10(bytes10 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
}
function logBytes11(bytes11 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
}
function logBytes12(bytes12 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
}
function logBytes13(bytes13 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
}
function logBytes14(bytes14 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
}
function logBytes15(bytes15 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
}
function logBytes16(bytes16 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
}
function logBytes17(bytes17 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
}
function logBytes18(bytes18 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
}
function logBytes19(bytes19 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
}
function logBytes20(bytes20 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
}
function logBytes21(bytes21 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
}
function logBytes22(bytes22 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
}
function logBytes23(bytes23 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
}
function logBytes24(bytes24 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
}
function logBytes25(bytes25 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
}
function logBytes26(bytes26 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
}
function logBytes27(bytes27 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
}
function logBytes28(bytes28 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
}
function logBytes29(bytes29 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
}
function logBytes30(bytes30 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
}
function logBytes31(bytes31 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
}
function logBytes32(bytes32 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
}
function log(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function log(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function log(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function log(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function log(uint p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint)", p0, p1));
}
function log(uint p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string)", p0, p1));
}
function log(uint p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool)", p0, p1));
}
function log(uint p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address)", p0, p1));
}
function log(string memory p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint)", p0, p1));
}
function log(string memory p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
}
function log(string memory p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
}
function log(string memory p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
}
function log(bool p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint)", p0, p1));
}
function log(bool p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
}
function log(bool p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
}
function log(bool p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
}
function log(address p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint)", p0, p1));
}
function log(address p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
}
function log(address p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
}
function log(address p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
}
function log(uint p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint)", p0, p1, p2));
}
function log(uint p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string)", p0, p1, p2));
}
function log(uint p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool)", p0, p1, p2));
}
function log(uint p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address)", p0, p1, p2));
}
function log(uint p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint)", p0, p1, p2));
}
function log(uint p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string)", p0, p1, p2));
}
function log(uint p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool)", p0, p1, p2));
}
function log(uint p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address)", p0, p1, p2));
}
function log(uint p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint)", p0, p1, p2));
}
function log(uint p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string)", p0, p1, p2));
}
function log(uint p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool)", p0, p1, p2));
}
function log(uint p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address)", p0, p1, p2));
}
function log(uint p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint)", p0, p1, p2));
}
function log(uint p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string)", p0, p1, p2));
}
function log(uint p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool)", p0, p1, p2));
}
function log(uint p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address)", p0, p1, p2));
}
function log(string memory p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint)", p0, p1, p2));
}
function log(string memory p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string)", p0, p1, p2));
}
function log(string memory p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool)", p0, p1, p2));
}
function log(string memory p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address)", p0, p1, p2));
}
function log(string memory p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint)", p0, p1, p2));
}
function log(string memory p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
}
function log(string memory p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
}
function log(string memory p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
}
function log(string memory p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint)", p0, p1, p2));
}
function log(string memory p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
}
function log(string memory p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
}
function log(string memory p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
}
function log(string memory p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint)", p0, p1, p2));
}
function log(string memory p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
}
function log(string memory p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
}
function log(string memory p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
}
function log(bool p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint)", p0, p1, p2));
}
function log(bool p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string)", p0, p1, p2));
}
function log(bool p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool)", p0, p1, p2));
}
function log(bool p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address)", p0, p1, p2));
}
function log(bool p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint)", p0, p1, p2));
}
function log(bool p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
}
function log(bool p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
}
function log(bool p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
}
function log(bool p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint)", p0, p1, p2));
}
function log(bool p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
}
function log(bool p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
}
function log(bool p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
}
function log(bool p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint)", p0, p1, p2));
}
function log(bool p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
}
function log(bool p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
}
function log(bool p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
}
function log(address p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint)", p0, p1, p2));
}
function log(address p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string)", p0, p1, p2));
}
function log(address p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool)", p0, p1, p2));
}
function log(address p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address)", p0, p1, p2));
}
function log(address p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint)", p0, p1, p2));
}
function log(address p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
}
function log(address p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
}
function log(address p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
}
function log(address p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint)", p0, p1, p2));
}
function log(address p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
}
function log(address p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
}
function log(address p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
}
function log(address p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint)", p0, p1, p2));
}
function log(address p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
}
function log(address p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
}
function log(address p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
}
function log(uint p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
}
}
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
/**
* @title ERC721 Burnable Token
* @dev ERC721 Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721Burnable is Context, ERC721 {
/**
* @dev Burns `tokenId`. See {ERC721-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
_burn(tokenId);
}
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
/**
* @dev ERC721 token with pausable token transfers, minting and burning.
*
* Useful for scenarios such as preventing trades until the end of an evaluation
* period, or having an emergency switch for freezing all token transfers in the
* event of a large bug.
*/
abstract contract ERC721Pausable is ERC721, Pausable {
/**
* @dev See {ERC721-_beforeTokenTransfer}.
*
* Requirements:
*
* - the contract must not be paused.
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
require(!paused(), "ERC721Pausable: token transfer while paused");
}
}
/**
* @dev ERC721 token with storage based token URI management.
*/
abstract contract ERC721URIStorage is ERC721 {
using Strings for uint256;
// Optional mapping for token URIs
mapping(uint256 => string) private _tokenURIs;
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721URIStorage: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
string memory base = _baseURI();
// If there is no base URI, return the token URI.
if (bytes(base).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(base, _tokenURI));
}
return super.tokenURI(tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721URIStorage: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual override {
super._burn(tokenId);
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
//SPDX-License-Identifier: Unlicense
// @title: Lil Baby Cat Gang
contract LilBabyCatGang is ERC721Enumerable, Ownable, ERC721Burnable, ERC721Pausable {
using SafeMath for uint256;
using Counters for Counters.Counter;
Counters.Counter private _tokenIdTracker;
uint public sale_state; // 0: not started sale, 1: presale, 2: public sale
uint256 public constant MAX_ITEMS = 3000;
uint256 public PRICE = 6E16; // 0.06 ETH
uint256 public PRESALE_PRICE = 4E16; // 0.04 ETH
uint256 public constant MAX_MINT = 3;
uint256 public constant MAX_MINT_PRESALE = 2;
string public baseTokenURI;
address public constant creatorAddress1 = 0x99bf0cC740acfea468feebe6051Ccb8A97F835f1;
address public constant creatorAddress2 = 0x43a8765193C99643eF9F9f976DAC3C880b0749d4;
address public constant creatorAddress3 = 0xb101a269A80FC6aC17267Fb3a5B19021D6D296AC;
address public constant devAddress = 0xFE8a2C736d9602E1D2fada377C0760450E2f8289;
mapping (address => bool) public whitelistedAddr;
event CreateBabyCatGang(uint256 indexed id);
constructor(string memory baseURI) ERC721("Lil Baby Cat Gang", "CatGang") {
setBaseURI(baseURI);
pause(true);
sale_state = 0;
}
modifier saleIsOpen {
require(_totalSupply() <= MAX_ITEMS, "Sale ended");
if (_msgSender() != owner()) {
require(!paused(), "Pausable: paused");
}
_;
}
function whitelistAddress (address[] memory users) public onlyOwner {
for (uint i = 0; i < users.length; i++) {
whitelistedAddr[users[i]] = true;
}
}
function removeWhitelistAddress (address[] memory users) public onlyOwner {
for (uint i = 0; i < users.length; i++) {
require(whitelistedAddr[users[i]], "address is not existed or already removed in whitelist");
whitelistedAddr[users[i]] = false;
}
}
function _totalSupply() internal view returns (uint) {
return _tokenIdTracker.current();
}
function totalMint() public view returns (uint256) {
return _totalSupply();
}
function mintReserve(uint256 _count, address _to) public onlyOwner {
uint256 total = _totalSupply();
require(total <= MAX_ITEMS, "Sale ended");
require(total + _count <= MAX_ITEMS, "Max limit");
for (uint256 i = 0; i < _count; i++) {
_mintAnElement(_to);
}
}
function mint(address _to, uint256 _count) public payable saleIsOpen {
uint256 total = _totalSupply();
require(total <= MAX_ITEMS, "Sale ended");
require(total + _count <= MAX_ITEMS, "Max limit");
require(sale_state != 0, "Sale is not started");
if (sale_state == 1) {
require(whitelistedAddr[_to] == true, "address is not whitelisted");
require(_count <= MAX_MINT_PRESALE, "Exceeds number");
} else {
require(_count <= MAX_MINT, "Exceeds number");
}
require(msg.value >= price(_count), "Value below price");
for (uint256 i = 0; i < _count; i++) {
_mintAnElement(_to);
}
}
function _mintAnElement(address _to) private {
uint id = _totalSupply();
_tokenIdTracker.increment();
_safeMint(_to, id);
emit CreateBabyCatGang(id);
}
function price(uint256 _count) public view returns (uint256) {
if (sale_state == 1) {
return PRESALE_PRICE.mul(_count);
}
return PRICE.mul(_count);
}
function _baseURI() internal view virtual override returns (string memory) {
return baseTokenURI;
}
function setBaseURI(string memory baseURI) public onlyOwner {
baseTokenURI = baseURI;
}
function setPresaleMintPrice(uint256 _price) external onlyOwner {
PRESALE_PRICE = _price;
}
function setMintPrice(uint256 _price) external onlyOwner {
PRICE = _price;
}
function walletOfOwner(address _owner) external view returns (uint256[] memory) {
uint256 tokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](tokenCount);
for (uint256 i = 0; i < tokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function pause(bool val) public onlyOwner {
if (val == true) {
_pause();
return;
}
_unpause();
}
function setState(uint _state) public onlyOwner {
sale_state = _state;
}
function withdrawAll() public payable onlyOwner {
uint256 balance = address(this).balance;
require(balance > 0);
_widthdraw(creatorAddress1, balance.mul(225).div(1000));
_widthdraw(creatorAddress2, balance.mul(5).div(100));
_widthdraw(devAddress, balance.mul(4).div(100));
_widthdraw(creatorAddress3, address(this).balance);
}
function _widthdraw(address _address, uint256 _amount) private {
(bool success,) = _address.call{value : _amount}("");
require(success, "Transfer failed.");
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override(ERC721, ERC721Enumerable, ERC721Pausable) {
super._beforeTokenTransfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721, ERC721Enumerable) returns (bool) {
return super.supportsInterface(interfaceId);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
2321,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
3075,
10122,
1063,
4769,
5377,
10122,
1035,
4769,
1027,
4769,
1006,
1014,
2595,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
2575,
21619,
2546,
2575,
2063,
2581,
21619,
2546,
2575,
2278,
26187,
2475,
2063,
2575,
2278,
2575,
2546,
2575,
2581,
1007,
1025,
3853,
1035,
4604,
21197,
4502,
8516,
10441,
2094,
1006,
27507,
3638,
18093,
1007,
2797,
3193,
1063,
21318,
3372,
17788,
2575,
18093,
7770,
13512,
2232,
1027,
18093,
1012,
3091,
1025,
4769,
10122,
4215,
16200,
4757,
1027,
10122,
1035,
4769,
1025,
3320,
1063,
2292,
18093,
14117,
2102,
1024,
1027,
5587,
1006,
18093,
1010,
3590,
1007,
2292,
1054,
1024,
1027,
10763,
9289,
2140,
1006,
3806,
1006,
1007,
1010,
10122,
4215,
16200,
4757,
1010,
18093,
14117,
2102,
1010,
18093,
7770,
13512,
2232,
1010,
1014,
1010,
1014,
1007,
1065,
1065,
3853,
8833,
1006,
1007,
4722,
3193,
1063,
1035,
4604,
21197,
4502,
8516,
10441,
2094,
1006,
11113,
2072,
1012,
4372,
16044,
24415,
5332,
16989,
11244,
1006,
1000,
8833,
1006,
1007,
1000,
1007,
1007,
1025,
1065,
3853,
8833,
18447,
1006,
20014,
1052,
2692,
1007,
4722,
3193,
1063,
1035,
4604,
21197,
4502,
8516,
10441,
2094,
1006,
11113,
2072,
1012,
4372,
16044,
24415,
5332,
16989,
11244,
1006,
1000,
8833,
1006,
20014,
1007,
1000,
1010,
1052,
2692,
1007,
1007,
1025,
1065,
3853,
8833,
20023,
2102,
1006,
21318,
3372,
1052,
2692,
1007,
4722,
3193,
1063,
1035,
4604,
21197,
4502,
8516,
10441,
2094,
1006,
11113,
2072,
1012,
4372,
16044,
24415,
5332,
16989,
11244,
1006,
1000,
8833,
1006,
21318,
3372,
1007,
1000,
1010,
1052,
2692,
1007,
1007,
1025,
1065,
3853,
15664,
18886,
3070,
1006,
5164,
3638,
1052,
2692,
1007,
4722,
3193,
1063,
1035,
4604,
21197,
4502,
8516,
10441,
2094,
1006,
11113,
2072,
1012,
4372,
16044,
24415,
5332,
16989,
11244,
1006,
1000,
8833,
1006,
5164,
1007,
1000,
1010,
1052,
2692,
1007,
1007,
1025,
1065,
3853,
8833,
5092,
4747,
1006,
22017,
2140,
1052,
2692,
1007,
4722,
3193,
1063,
1035,
4604,
21197,
4502,
8516,
10441,
2094,
1006,
11113,
2072,
1012,
4372,
16044,
24415,
5332,
16989,
11244,
1006,
1000,
8833,
1006,
22017,
2140,
1007,
1000,
1010,
1052,
2692,
1007,
1007,
1025,
1065,
3853,
8833,
4215,
16200,
4757,
1006,
4769,
1052,
2692,
1007,
4722,
3193,
1063,
1035,
4604,
21197,
4502,
8516,
10441,
2094,
1006,
11113,
2072,
1012,
4372,
16044,
24415,
5332,
16989,
11244,
1006,
1000,
8833,
1006,
4769,
1007,
1000,
1010,
1052,
2692,
1007,
1007,
1025,
1065,
3853,
8833,
3762,
4570,
1006,
27507,
3638,
1052,
2692,
1007,
4722,
3193,
1063,
1035,
4604,
21197,
4502,
8516,
10441,
2094,
1006,
11113,
2072,
1012,
4372,
16044,
24415,
5332,
16989,
11244,
1006,
1000,
8833,
1006,
27507,
1007,
1000,
1010,
1052,
2692,
1007,
1007,
1025,
1065,
3853,
8833,
3762,
4570,
2487,
1006,
27507,
2487,
1052,
2692,
1007,
4722,
3193,
1063,
1035,
4604,
21197,
4502,
8516,
10441,
2094,
1006,
11113,
2072,
1012,
4372,
16044,
24415,
5332,
16989,
11244,
1006,
1000,
8833,
1006,
27507,
2487,
1007,
1000,
1010,
1052,
2692,
1007,
1007,
1025,
1065,
3853,
8833,
3762,
4570,
2475,
1006,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-02-26
*/
// Dependency file: /Users/starfish/code/badger-system/deps/@openzeppelin/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT
// pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* // importANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// Dependency file: /Users/starfish/code/badger-system/deps/@openzeppelin/contracts/math/SafeMath.sol
// pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// Dependency file: /Users/starfish/code/badger-system/deps/@openzeppelin/contracts/utils/Address.sol
// pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [// importANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* // importANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// Dependency file: /Users/starfish/code/badger-system/deps/@openzeppelin/contracts/token/ERC20/SafeERC20.sol
// pragma solidity ^0.6.0;
// import "/Users/starfish/code/badger-system/deps/@openzeppelin/contracts/token/ERC20/IERC20.sol";
// import "/Users/starfish/code/badger-system/deps/@openzeppelin/contracts/math/SafeMath.sol";
// import "/Users/starfish/code/badger-system/deps/@openzeppelin/contracts/utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// Dependency file: /Users/starfish/code/badger-system/deps/@openzeppelin/contracts/token/ERC20/TokenTimelock.sol
// pragma solidity ^0.6.0;
// import "/Users/starfish/code/badger-system/deps/@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
/**
* @dev A token holder contract that will allow a beneficiary to extract the
* tokens after a given release time.
*
* Useful for simple vesting schedules like "advisors get all of their tokens
* after 1 year".
*/
contract TokenTimelock {
using SafeERC20 for IERC20;
// ERC20 basic token contract being held
IERC20 private _token;
// beneficiary of tokens after they are released
address private _beneficiary;
// timestamp when token release is enabled
uint256 private _releaseTime;
constructor (IERC20 token, address beneficiary, uint256 releaseTime) public {
// solhint-disable-next-line not-rely-on-time
require(releaseTime > block.timestamp, "TokenTimelock: release time is before current time");
_token = token;
_beneficiary = beneficiary;
_releaseTime = releaseTime;
}
/**
* @return the token being held.
*/
function token() public view returns (IERC20) {
return _token;
}
/**
* @return the beneficiary of the tokens.
*/
function beneficiary() public view returns (address) {
return _beneficiary;
}
/**
* @return the time when the tokens are released.
*/
function releaseTime() public view returns (uint256) {
return _releaseTime;
}
/**
* @notice Transfers tokens held by timelock to beneficiary.
*/
function release() public virtual {
// solhint-disable-next-line not-rely-on-time
require(block.timestamp >= _releaseTime, "TokenTimelock: current time is before release time");
uint256 amount = _token.balanceOf(address(this));
require(amount > 0, "TokenTimelock: no tokens to release");
_token.safeTransfer(_beneficiary, amount);
}
}
// Root file: contracts/badger-timelock/OtcEscrow.sol
pragma solidity ^0.6.8;
// import "/Users/starfish/code/badger-system/deps/@openzeppelin/contracts/token/ERC20/IERC20.sol";
// import "/Users/starfish/code/badger-system/deps/@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
// import "/Users/starfish/code/badger-system/deps/@openzeppelin/contracts/math/SafeMath.sol";
// import "/Users/starfish/code/badger-system/deps/@openzeppelin/contracts/token/ERC20/TokenTimelock.sol";
/*
Simple OTC Escrow contract to transfer vested bBadger in exchange for specified USDC amount
*/
contract OtcEscrow {
using SafeMath for uint256;
using SafeERC20 for IERC20;
address constant usdc = 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48;
address constant bBadger = 0x19D97D8fA813EE2f51aD4B4e04EA08bAf4DFfC28;
address constant badgerGovernance = 0xB65cef03b9B89f99517643226d76e286ee999e77;
event VestingDeployed(address vesting);
address public beneficiary;
uint256 public duration;
uint256 public usdcAmount;
uint256 public bBadgerAmount;
constructor(
address beneficiary_,
uint256 duration_,
uint256 usdcAmount_,
uint256 bBadgerAmount_
) public {
beneficiary = beneficiary_;
duration = duration_;
usdcAmount = usdcAmount_;
bBadgerAmount = bBadgerAmount_;
}
modifier onlyApprovedParties() {
require(msg.sender == badgerGovernance || msg.sender == beneficiary);
_;
}
/// @dev Atomically trade specified amonut of USDC for control over bBadger in vesting contract
/// @dev Either counterparty may execute swap if sufficient token approval is given by recipient
function swap() public onlyApprovedParties {
// Transfer expected USDC from beneficiary
IERC20(usdc).safeTransferFrom(beneficiary, address(this), usdcAmount);
// Create Vesting contract
TokenTimelock vesting = new TokenTimelock(
IERC20(bBadger),
beneficiary,
now + duration
);
// Transfer bBadger to vesting contract
IERC20(bBadger).safeTransfer(address(vesting), bBadgerAmount);
// Transfer USDC to badger governance
IERC20(usdc).safeTransfer(badgerGovernance, usdcAmount);
emit VestingDeployed(address(vesting));
}
/// @dev Return bBadger to Badger Governance to revoke escrow deal
function revoke() external {
require(msg.sender == badgerGovernance, "onlyBadgerGovernance");
uint256 bBadgerBalance = IERC20(bBadger).balanceOf(address(this));
IERC20(bBadger).safeTransfer(badgerGovernance, bBadgerBalance);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6185,
1011,
2656,
1008,
1013,
1013,
1013,
24394,
5371,
1024,
1013,
5198,
1013,
2732,
7529,
1013,
3642,
1013,
24186,
1011,
2291,
1013,
2139,
4523,
1013,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
1013,
1013,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-15
*/
// SPDX-License-Identifier: MIT
/*
* Token has been generated for FREE using https://vittominacori.github.io/erc20-generator/
*
* NOTE: "Contract Source Code Verified (Similar Match)" means that this Token is similar to other tokens deployed
* using the same generator. It is not an issue. It means that you won't need to verify your source code because of
* it is already verified.
*
* DISCLAIMER: GENERATOR'S AUTHOR IS FREE OF ANY LIABILITY REGARDING THE TOKEN AND THE USE THAT IS MADE OF IT.
* The following code is provided under MIT License. Anyone can use it as per their needs.
* The generator's purpose is to make people able to tokenize their ideas without coding or paying for it.
* Source code is well tested and continuously updated to reduce risk of bugs and to introduce language optimizations.
* Anyway the purchase of tokens involves a high degree of risk. Before acquiring tokens, it is recommended to
* carefully weighs all the information and risks detailed in Token owner's Conditions.
*/
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor(address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/utils/GeneratorCopyright.sol
pragma solidity ^0.8.0;
/**
* @title GeneratorCopyright
* @dev Implementation of the GeneratorCopyright
*/
contract GeneratorCopyright {
string private constant _GENERATOR = "https://vittominacori.github.io/erc20-generator";
string private _version;
constructor(string memory version_) {
_version = version_;
}
/**
* @dev Returns the token generator tool.
*/
function generator() public pure returns (string memory) {
return _GENERATOR;
}
/**
* @dev Returns the token generator version.
*/
function version() public view returns (string memory) {
return _version;
}
}
// File: contracts/token/ERC20/HelloERC20.sol
pragma solidity ^0.8.0;
/**
* @title HelloERC20
* @author ERC20 Generator (https://vittominacori.github.io/erc20-generator)
* @dev Implementation of the HelloERC20
*/
contract HelloERC20 is ERC20, ServicePayer, GeneratorCopyright("v5.1.0") {
constructor(
string memory name_,
string memory symbol_,
address payable feeReceiver_
) payable ERC20(name_, symbol_) ServicePayer(feeReceiver_, "HelloERC20") {
_mint(_msgSender(), 10000e18);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2321,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
1008,
19204,
2038,
2042,
7013,
2005,
2489,
2478,
16770,
1024,
1013,
1013,
6819,
9284,
22311,
27108,
2072,
1012,
21025,
2705,
12083,
1012,
22834,
1013,
9413,
2278,
11387,
1011,
13103,
1013,
1008,
1008,
3602,
1024,
1000,
3206,
3120,
3642,
20119,
1006,
2714,
2674,
1007,
1000,
2965,
2008,
2023,
19204,
2003,
2714,
2000,
2060,
19204,
2015,
7333,
1008,
2478,
1996,
2168,
13103,
1012,
2009,
2003,
2025,
2019,
3277,
1012,
2009,
2965,
2008,
2017,
2180,
1005,
1056,
2342,
2000,
20410,
2115,
3120,
3642,
2138,
1997,
1008,
2009,
2003,
2525,
20119,
1012,
1008,
1008,
5860,
19771,
5017,
1024,
13103,
1005,
1055,
3166,
2003,
2489,
1997,
2151,
14000,
4953,
1996,
19204,
1998,
1996,
2224,
2008,
2003,
2081,
1997,
2009,
1012,
1008,
1996,
2206,
3642,
2003,
3024,
2104,
10210,
6105,
1012,
3087,
2064,
2224,
2009,
2004,
2566,
2037,
3791,
1012,
1008,
1996,
13103,
1005,
1055,
3800,
2003,
2000,
2191,
2111,
2583,
2000,
19204,
4697,
2037,
4784,
2302,
16861,
2030,
7079,
2005,
2009,
1012,
1008,
3120,
3642,
2003,
2092,
7718,
1998,
10843,
7172,
2000,
5547,
3891,
1997,
12883,
1998,
2000,
8970,
2653,
20600,
2015,
1012,
1008,
4312,
1996,
5309,
1997,
19204,
2015,
7336,
1037,
2152,
3014,
1997,
3891,
1012,
2077,
13868,
19204,
2015,
1010,
2009,
2003,
6749,
2000,
1008,
5362,
21094,
2035,
1996,
2592,
1998,
10831,
6851,
1999,
19204,
3954,
1005,
1055,
3785,
1012,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-26
*/
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract EVERRICH is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000000 * 10**18;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tBurnTotal;
string private _name = 'EverRich';
string private _symbol = 'EverRich⭐';
uint8 private _decimals = 18;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalBurn() public view returns (uint256) {
return _tBurnTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tBurnTotal = _tBurnTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already included");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee, uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) private {
_rTotal = _rTotal.sub(rFee);
_tBurnTotal = _tBurnTotal.add(tFee).add(tBurnValue).add(tTax).add(tLiquidity);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256,uint256,uint256,uint256) {
uint256[12] memory _localVal;
(_localVal[0]/**tTransferAmount*/, _localVal[1] /**tFee*/, _localVal[2] /**tBurnValue*/,_localVal[8]/*tTAx*/,_localVal[10]/**tLiquidity*/) = _getTValues(tAmount);
_localVal[3] /**currentRate*/ = _getRate();
( _localVal[4] /**rAmount*/, _localVal[5] /**rTransferAmount*/, _localVal[6] /**rFee*/, _localVal[7] /**rBurnValue*/,_localVal[9]/*rTax*/,_localVal[11]/**rLiquidity*/) = _getRValues(tAmount, _localVal[1], _localVal[3], _localVal[2],_localVal[8],_localVal[10]);
return (_localVal[4], _localVal[5], _localVal[6], _localVal[0], _localVal[1], _localVal[2],_localVal[8],_localVal[10]);
}
function _getTValues(uint256 tAmount) private pure returns (uint256, uint256, uint256,uint256,uint256) {
uint256[5] memory _localVal;
_localVal[0]/**supply*/ = tAmount.div(100).mul(0);
_localVal[1]/**tBurnValue*/ = tAmount.div(100).mul(0);
_localVal[2]/**tholder*/ = tAmount.div(100).mul(1 );
_localVal[3]/**tLiquidity*/ = tAmount.div(100).mul(15);
_localVal[4]/**tTransferAmount*/ = tAmount.sub(_localVal[2]).sub(_localVal[1]).sub(_localVal[0]).sub(_localVal[3]);
return (_localVal[4], _localVal[2], _localVal[1],_localVal[0], _localVal[3]);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate, uint256 tBurnValue,uint256 tTax,uint tLiquidity) private pure returns (uint256, uint256, uint256,uint256,uint256,uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rBurnValue = tBurnValue.mul(currentRate);
uint256 rLiqidity = tLiquidity.mul(currentRate);
uint256 rTax = tTax.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rBurnValue).sub(rTax).sub(rLiqidity);
return (rAmount, rTransferAmount, rFee, rBurnValue,rTax,rLiqidity);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2656,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-17
*/
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/security/ReentrancyGuard.sol
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/cryptography/MerkleProof.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = _efficientHash(computedHash, proofElement);
} else {
// Hash(current element of the proof + current computed hash)
computedHash = _efficientHash(proofElement, computedHash);
}
}
return computedHash;
}
function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
assembly {
mstore(0x00, a)
mstore(0x20, b)
value := keccak256(0x00, 0x40)
}
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: contracts/ERC721A.sol
// Creator: Chiru Labs
pragma solidity ^0.8.4;
error ApprovalCallerNotOwnerNorApproved();
error ApprovalQueryForNonexistentToken();
error ApproveToCaller();
error ApprovalToCurrentOwner();
error BalanceQueryForZeroAddress();
error MintedQueryForZeroAddress();
error BurnedQueryForZeroAddress();
error AuxQueryForZeroAddress();
error MintToZeroAddress();
error MintZeroQuantity();
error OwnerIndexOutOfBounds();
error OwnerQueryForNonexistentToken();
error TokenIndexOutOfBounds();
error TransferCallerNotOwnerNorApproved();
error TransferFromIncorrectOwner();
error TransferToNonERC721ReceiverImplementer();
error TransferToZeroAddress();
error URIQueryForNonexistentToken();
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
*
* Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
*
* Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Compiler will pack this into a single 256bit word.
struct TokenOwnership {
// The address of the owner.
address addr;
// Keeps track of the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
}
// Compiler will pack this into a single 256bit word.
struct AddressData {
// Realistically, 2**64-1 is more than enough.
uint64 balance;
// Keeps track of mint count with minimal overhead for tokenomics.
uint64 numberMinted;
// Keeps track of burn count with minimal overhead for tokenomics.
uint64 numberBurned;
// For miscellaneous variable(s) pertaining to the address
// (e.g. number of whitelist mint slots used).
// If there are multiple variables, please pack them into a uint64.
uint64 aux;
}
// The tokenId of the next token to be minted.
uint256 internal _currentIndex;
// The number of tokens burned.
uint256 internal _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
/**
* To change the starting tokenId, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 1;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
* @dev Burned tokens are calculated here, use _totalMinted() if you want to count just minted tokens.
*/
function totalSupply() public view returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than _currentIndex - _startTokenId() times
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view returns (uint256) {
// Counter underflow is impossible as _currentIndex does not decrement,
// and it is initialized to _startTokenId()
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return uint256(_addressData[owner].balance);
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
if (owner == address(0)) revert MintedQueryForZeroAddress();
return uint256(_addressData[owner].numberMinted);
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
if (owner == address(0)) revert BurnedQueryForZeroAddress();
return uint256(_addressData[owner].numberBurned);
}
/**
* Returns the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
if (owner == address(0)) revert AuxQueryForZeroAddress();
return _addressData[owner].aux;
}
/**
* Sets the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal {
if (owner == address(0)) revert AuxQueryForZeroAddress();
_addressData[owner].aux = aux;
}
/**
* Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around in the collection over time.
*/
function ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr && curr < _currentIndex) {
TokenOwnership memory ownership = _ownerships[curr];
if (!ownership.burned) {
if (ownership.addr != address(0)) {
return ownership;
}
// Invariant:
// There will always be an ownership that has an address and is not burned
// before an ownership that does not have an address and is not burned.
// Hence, curr will not underflow.
while (true) {
curr--;
ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
if (to == owner) revert ApprovalToCurrentOwner();
if (_msgSender() != owner && !isApprovedForAll(owner, _msgSender())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public override {
if (operator == _msgSender()) revert ApproveToCaller();
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
_transfer(from, to, tokenId);
if (to.isContract() && !_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _startTokenId() <= tokenId && tokenId < _currentIndex &&
!_ownerships[tokenId].burned;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, '');
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
_mint(to, quantity, _data, true);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _mint(
address to,
uint256 quantity,
bytes memory _data,
bool safe
) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint64(quantity);
_addressData[to].numberMinted += uint64(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
if (safe && to.isContract()) {
do {
emit Transfer(address(0), to, updatedIndex);
if (!_checkContractOnERC721Received(address(0), to, updatedIndex++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (updatedIndex != end);
// Reentrancy protection
if (_currentIndex != startTokenId) revert();
} else {
do {
emit Transfer(address(0), to, updatedIndex++);
} while (updatedIndex != end);
}
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
isApprovedForAll(prevOwnership.addr, _msgSender()) ||
getApproved(tokenId) == _msgSender());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
if (prevOwnership.addr != from) revert TransferFromIncorrectOwner();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
_ownerships[tokenId].addr = to;
_ownerships[tokenId].startTimestamp = uint64(block.timestamp);
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId < _currentIndex) {
_ownerships[nextTokenId].addr = prevOwnership.addr;
_ownerships[nextTokenId].startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
_beforeTokenTransfers(prevOwnership.addr, address(0), tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
_addressData[prevOwnership.addr].balance -= 1;
_addressData[prevOwnership.addr].numberBurned += 1;
// Keep track of who burned the token, and the timestamp of burning.
_ownerships[tokenId].addr = prevOwnership.addr;
_ownerships[tokenId].startTimestamp = uint64(block.timestamp);
_ownerships[tokenId].burned = true;
// If the ownership slot of tokenId+1 is not explicitly set, that means the burn initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId < _currentIndex) {
_ownerships[nextTokenId].addr = prevOwnership.addr;
_ownerships[nextTokenId].startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(prevOwnership.addr, address(0), tokenId);
_afterTokenTransfers(prevOwnership.addr, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
* And also called before burning one token.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
* And also called after one token has been burned.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: contracts/MoonBats.sol
pragma solidity ^0.8.4;
contract MoonBats is Ownable, ERC721A, ReentrancyGuard {
constructor() ERC721A("MoonBats", "MOONBATS") {}
uint256 PRICE = .01 ether;
uint256 MAX_TXN = 10;
string private _baseTokenURI;
function mint(uint256 mintAmount)
public
payable
{
require(mintAmount > 0, "Mint Amount Incorrect");
require(msg.value >= mintAmount * PRICE, "Pay amount Incorrect");
require(mintAmount < MAX_TXN + 1, "Exceeds per transaction amount");
_safeMint(msg.sender, mintAmount);
}
function numberMinted(address owner) public view returns (uint256) {
return _numberMinted(owner);
}
function getOwnershipData(uint256 tokenId) external view returns (TokenOwnership memory)
{
return ownershipOf(tokenId);
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function setBaseURI(string calldata baseURI) external onlyOwner {
_baseTokenURI = baseURI;
}
function withdrawMoney() external onlyOwner nonReentrant {
(bool success, ) = msg.sender.call{value: address(this).balance}("");
require(success, "Transfer failed.");
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2459,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
4769,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1006,
2197,
7172,
1058,
2549,
1012,
1019,
1012,
1014,
1007,
1006,
21183,
12146,
1013,
4769,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1015,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3074,
1997,
4972,
3141,
2000,
1996,
4769,
2828,
1008,
1013,
3075,
4769,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1036,
4070,
1036,
2003,
1037,
3206,
1012,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2009,
2003,
25135,
2000,
7868,
2008,
2019,
4769,
2005,
2029,
2023,
3853,
5651,
1008,
6270,
2003,
2019,
27223,
1011,
3079,
4070,
1006,
1041,
10441,
1007,
1998,
2025,
1037,
3206,
1012,
1008,
1008,
2426,
2500,
1010,
1036,
2003,
8663,
6494,
6593,
1036,
2097,
2709,
6270,
2005,
1996,
2206,
1008,
4127,
1997,
11596,
1024,
1008,
1008,
1011,
2019,
27223,
1011,
3079,
4070,
1008,
1011,
1037,
3206,
1999,
2810,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2097,
2022,
2580,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2973,
1010,
2021,
2001,
3908,
1008,
1027,
1027,
1027,
1027,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2017,
5807,
1005,
1056,
11160,
2006,
1036,
2003,
8663,
6494,
6593,
1036,
2000,
4047,
2114,
5956,
5414,
4491,
999,
1008,
1008,
10723,
4455,
2013,
8311,
2003,
3811,
22585,
1012,
2009,
7807,
4012,
6873,
3736,
8553,
1010,
7807,
2490,
2005,
6047,
15882,
2015,
1008,
2066,
1043,
27109,
3647,
1010,
1998,
2515,
2025,
3073,
3036,
2144,
2009,
2064,
2022,
25022,
11890,
2819,
15338,
2098,
2011,
4214,
2013,
1037,
3206,
1008,
9570,
2953,
1012,
1008,
1027,
1027,
1027,
1027,
1008,
1013,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
2023,
4118,
16803,
2006,
4654,
13535,
19847,
4697,
1013,
4769,
1012,
3642,
1012,
3091,
1010,
2029,
5651,
1014,
1013,
1013,
2005,
8311,
1999,
2810,
1010,
2144,
1996,
3642,
2003,
2069,
8250,
2012,
1996,
2203,
1013,
1013,
1997,
1996,
9570,
2953,
7781,
1012,
2709,
4070,
1012,
3642,
1012,
3091,
1028,
1014,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
6110,
2005,
5024,
3012,
1005,
1055,
1036,
4651,
1036,
1024,
10255,
1036,
3815,
1036,
11417,
2000,
1008,
1036,
7799,
1036,
1010,
2830,
2075,
2035,
2800,
3806,
1998,
7065,
8743,
2075,
2006,
10697,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
6988,
1031,
1041,
11514,
15136,
2620,
2549,
1033,
7457,
1996,
3806,
3465,
1008,
1997,
3056,
6728,
23237,
1010,
4298,
2437,
8311,
2175,
2058,
1996,
11816,
2692,
3806,
5787,
1008,
9770,
2011,
1036,
4651,
1036,
1010,
2437,
2068,
4039,
2000,
4374,
5029,
3081,
1008,
1036,
4651,
1036,
1012,
1063,
4604,
10175,
5657,
1065,
20362,
2023,
22718,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
29454,
29206,
3401,
1012,
9530,
5054,
6508,
2015,
1012,
5658,
1013,
8466,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.18;
// ----------------------------------------------------------------------------
// 'SR&M' token contract
//
// Deployed to : 0x4a56a653e4dEB17afc04Ef20D9686937DD42E675
// Symbol : SR&M
// Name : SaveRickAndMorty
// Total supply: 1000000000.00
// Decimals : 18
//
// Enjoy.
//
// (c) by Moritz Neto with BokkyPooBah / Bok Consulting Pty Ltd Au 2017. The MIT Licence.
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and assisted
// token transfers
// ----------------------------------------------------------------------------
contract SaveRickAndMorty is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
function SaveRickAndMorty() public {
symbol = "SR&M";
name = "SaveRickAndMorty";
decimals = 18;
_totalSupply = 1000000000000000000000000000;
balances[0x4a56a653e4dEB17afc04Ef20D9686937DD42E675] = _totalSupply;
Transfer(address(0), 0x4a56a653e4dEB17afc04Ef20D9686937DD42E675, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1004,
1001,
4464,
1025,
5034,
1004,
1049,
1004,
1001,
4464,
1025,
19204,
3206,
1013,
1013,
1013,
1013,
7333,
2000,
1024,
1014,
2595,
2549,
2050,
26976,
2050,
26187,
2509,
2063,
2549,
3207,
2497,
16576,
10354,
2278,
2692,
2549,
12879,
11387,
2094,
2683,
2575,
20842,
2683,
24434,
14141,
20958,
2063,
2575,
23352,
1013,
1013,
6454,
1024,
5034,
1004,
1049,
1013,
1013,
2171,
1024,
3828,
11285,
5685,
5302,
5339,
2100,
1013,
1013,
2561,
4425,
1024,
6694,
8889,
8889,
8889,
1012,
4002,
1013,
1013,
26066,
2015,
1024,
2324,
1013,
1013,
1013,
1013,
5959,
1012,
1013,
1013,
1013,
1013,
1006,
1039,
1007,
2011,
28461,
5658,
2080,
2007,
8945,
19658,
22571,
9541,
24206,
1013,
8945,
2243,
10552,
13866,
2100,
5183,
8740,
2418,
1012,
1996,
10210,
11172,
1012,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
2015,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.23;
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
// Gas optimization: this is cheaper than asserting 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 totalSupply_;
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256) {
return balances[_owner];
}
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender)
public view returns (uint256);
function transferFrom(address from, address to, uint256 value)
public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(
address _from,
address _to,
uint256 _value
)
public
returns (bool)
{
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(
address _owner,
address _spender
)
public
view
returns (uint256)
{
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(
address _spender,
uint _addedValue
)
public
returns (bool)
{
allowed[msg.sender][_spender] = (
allowed[msg.sender][_spender].add(_addedValue));
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(
address _spender,
uint _subtractedValue
)
public
returns (bool)
{
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(owner);
owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function transferOwnership(address _newOwner) public onlyOwner {
_transferOwnership(_newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function _transferOwnership(address _newOwner) internal {
require(_newOwner != address(0));
emit OwnershipTransferred(owner, _newOwner);
owner = _newOwner;
}
}
/**
* @title Mintable token
* @dev Simple ERC20 Token example, with mintable token creation
* @dev Issue: * https://github.com/OpenZeppelin/openzeppelin-solidity/issues/120
* Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
*/
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
modifier hasMintPermission() {
require(msg.sender == owner);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(
address _to,
uint256 _amount
)
hasMintPermission
canMint
public
returns (bool)
{
totalSupply_ = totalSupply_.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Mint(_to, _amount);
emit Transfer(address(0), _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() onlyOwner canMint public returns (bool) {
mintingFinished = true;
emit MintFinished();
return true;
}
}
contract FreezableToken is StandardToken {
// freezing chains
mapping (bytes32 => uint64) internal chains;
// freezing amounts for each chain
mapping (bytes32 => uint) internal freezings;
// total freezing balance per address
mapping (address => uint) internal freezingBalance;
event Freezed(address indexed to, uint64 release, uint amount);
event Released(address indexed owner, uint amount);
/**
* @dev Gets the balance of the specified address include freezing tokens.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return super.balanceOf(_owner) + freezingBalance[_owner];
}
/**
* @dev Gets the balance of the specified address without freezing tokens.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function actualBalanceOf(address _owner) public view returns (uint256 balance) {
return super.balanceOf(_owner);
}
function freezingBalanceOf(address _owner) public view returns (uint256 balance) {
return freezingBalance[_owner];
}
/**
* @dev gets freezing count
* @param _addr Address of freeze tokens owner.
*/
function freezingCount(address _addr) public view returns (uint count) {
uint64 release = chains[toKey(_addr, 0)];
while (release != 0) {
count++;
release = chains[toKey(_addr, release)];
}
}
/**
* @dev gets freezing end date and freezing balance for the freezing portion specified by index.
* @param _addr Address of freeze tokens owner.
* @param _index Freezing portion index. It ordered by release date descending.
*/
function getFreezing(address _addr, uint _index) public view returns (uint64 _release, uint _balance) {
for (uint i = 0; i < _index + 1; i++) {
_release = chains[toKey(_addr, _release)];
if (_release == 0) {
return;
}
}
_balance = freezings[toKey(_addr, _release)];
}
/**
* @dev freeze your tokens to the specified address.
* Be careful, gas usage is not deterministic,
* and depends on how many freezes _to address already has.
* @param _to Address to which token will be freeze.
* @param _amount Amount of token to freeze.
* @param _until Release date, must be in future.
*/
function freezeTo(address _to, uint _amount, uint64 _until) public {
require(_to != address(0));
require(_amount <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_amount);
bytes32 currentKey = toKey(_to, _until);
freezings[currentKey] = freezings[currentKey].add(_amount);
freezingBalance[_to] = freezingBalance[_to].add(_amount);
freeze(_to, _until);
emit Transfer(msg.sender, _to, _amount);
emit Freezed(_to, _until, _amount);
}
/**
* @dev release first available freezing tokens.
*/
function releaseOnce() public {
bytes32 headKey = toKey(msg.sender, 0);
uint64 head = chains[headKey];
require(head != 0);
require(uint64(block.timestamp) > head);
bytes32 currentKey = toKey(msg.sender, head);
uint64 next = chains[currentKey];
uint amount = freezings[currentKey];
delete freezings[currentKey];
balances[msg.sender] = balances[msg.sender].add(amount);
freezingBalance[msg.sender] = freezingBalance[msg.sender].sub(amount);
if (next == 0) {
delete chains[headKey];
} else {
chains[headKey] = next;
delete chains[currentKey];
}
emit Released(msg.sender, amount);
}
/**
* @dev release all available for release freezing tokens. Gas usage is not deterministic!
* @return how many tokens was released
*/
function releaseAll() public returns (uint tokens) {
uint release;
uint balance;
(release, balance) = getFreezing(msg.sender, 0);
while (release != 0 && block.timestamp > release) {
releaseOnce();
tokens += balance;
(release, balance) = getFreezing(msg.sender, 0);
}
}
function toKey(address _addr, uint _release) internal pure returns (bytes32 result) {
// WISH masc to increase entropy
result = 0x5749534800000000000000000000000000000000000000000000000000000000;
assembly {
result := or(result, mul(_addr, 0x10000000000000000))
result := or(result, _release)
}
}
function freeze(address _to, uint64 _until) internal {
require(_until > block.timestamp);
bytes32 key = toKey(_to, _until);
bytes32 parentKey = toKey(_to, uint64(0));
uint64 next = chains[parentKey];
if (next == 0) {
chains[parentKey] = _until;
return;
}
bytes32 nextKey = toKey(_to, next);
uint parent;
while (next != 0 && _until > next) {
parent = next;
parentKey = nextKey;
next = chains[nextKey];
nextKey = toKey(_to, next);
}
if (_until == next) {
return;
}
if (next != 0) {
chains[key] = next;
}
chains[parentKey] = _until;
}
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is BasicToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
_burn(msg.sender, _value);
}
function _burn(address _who, uint256 _value) internal {
require(_value <= balances[_who]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
balances[_who] = balances[_who].sub(_value);
totalSupply_ = totalSupply_.sub(_value);
emit Burn(_who, _value);
emit Transfer(_who, address(0), _value);
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
emit Unpause();
}
}
contract FreezableMintableToken is FreezableToken, MintableToken {
/**
* @dev Mint the specified amount of token to the specified address and freeze it until the specified date.
* Be careful, gas usage is not deterministic,
* and depends on how many freezes _to address already has.
* @param _to Address to which token will be freeze.
* @param _amount Amount of token to mint and freeze.
* @param _until Release date, must be in future.
* @return A boolean that indicates if the operation was successful.
*/
function mintAndFreeze(address _to, uint _amount, uint64 _until) public onlyOwner canMint returns (bool) {
totalSupply_ = totalSupply_.add(_amount);
bytes32 currentKey = toKey(_to, _until);
freezings[currentKey] = freezings[currentKey].add(_amount);
freezingBalance[_to] = freezingBalance[_to].add(_amount);
freeze(_to, _until);
emit Mint(_to, _amount);
emit Freezed(_to, _until, _amount);
emit Transfer(msg.sender, _to, _amount);
return true;
}
}
contract Consts {
uint public constant TOKEN_DECIMALS = 18;
uint8 public constant TOKEN_DECIMALS_UINT8 = 18;
uint public constant TOKEN_DECIMAL_MULTIPLIER = 10 ** TOKEN_DECIMALS;
string public constant TOKEN_NAME = "YDEX";
string public constant TOKEN_SYMBOL = "YDEX";
bool public constant PAUSED = false;
address public constant TARGET_USER = 0x0930a5d5f3997492d6e238e6432815c8da979ea0;
bool public constant CONTINUE_MINTING = false;
}
contract MainToken is Consts, FreezableMintableToken, BurnableToken, Pausable
{
event Initialized();
bool public initialized = false;
constructor() public {
init();
transferOwnership(TARGET_USER);
}
function name() public pure returns (string _name) {
return TOKEN_NAME;
}
function symbol() public pure returns (string _symbol) {
return TOKEN_SYMBOL;
}
function decimals() public pure returns (uint8 _decimals) {
return TOKEN_DECIMALS_UINT8;
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool _success) {
require(!paused);
return super.transferFrom(_from, _to, _value);
}
function transfer(address _to, uint256 _value) public returns (bool _success) {
require(!paused);
return super.transfer(_to, _value);
}
function init() private {
require(!initialized);
initialized = true;
if (PAUSED) {
pause();
}
address[5] memory addresses = [address(0x4663c3bf938f29e3735cec4fb4ac12a7566fbc13),address(0x030b5bfeed7963ebdcf623b200713bb2922c8216),address(0xef5695bf9545e6eb230b0055d00d3717c8d73e32),address(0x4caeddd7b6548968a057c06b956f20a297e0d6b4),address(0xa7df8e92122bf0ed3baf14640843fba5917557a1)];
uint[5] memory amounts = [uint(12600000000000000000000),uint(2000000000000000000000),uint(4000000000000000000000),uint(2000000000000000000000),uint(2000000000000000000000)];
uint64[5] memory freezes = [uint64(0),uint64(0),uint64(1631905201),uint64(1758135601),uint64(0)];
for (uint i = 0; i < addresses.length; i++) {
if (freezes[i] == 0) {
mint(addresses[i], amounts[i]);
} else {
mintAndFreeze(addresses[i], amounts[i], freezes[i]);
}
}
if (!CONTINUE_MINTING) {
finishMinting();
}
emit Initialized();
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2603,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
22083,
2594,
1008,
1030,
16475,
16325,
2544,
1997,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
20311,
1008,
1013,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
27644,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
1013,
1013,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity 0.6.0;
// AgnosticPrivateSale
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0);
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
}
interface ERC20 {
function balanceOf(address who) external view returns (uint256);
function transfer(address to, uint value) external returns (bool success);
}
contract AgnosticPrivateSale {
using SafeMath for uint256;
uint256 public totalSold;
ERC20 public Token;
address payable public owner;
uint256 public constant decimals = 18;
uint256 private constant _precision = 10 ** decimals;
uint256 public startDate;
bool ableToClaim;
bool sellSystem;
struct User {
uint256 accountBalance;
}
mapping(address => User) public users;
address[] public allUsers;
constructor(address token) public {
owner = msg.sender;
Token = ERC20(token);
ableToClaim = false;
sellSystem = true;
startDate = now;
}
function contribute() external payable {
require(sellSystem);
require(msg.value >= 0.01 ether);
uint256 amount = msg.value;
if (now.sub(startDate) <= 2 days) {
amount = amount.mul(100);
} else if(now.sub(startDate) > 2 days && now.sub(startDate) <= 3 days) {
amount = amount.mul(95);
} else if(now.sub(startDate) > 3 days && now.sub(startDate) <= 4 days) {
amount = amount.mul(90);
} else if(now.sub(startDate) > 4 days && now.sub(startDate) <= 5 days) {
amount = amount.mul(85);
} else if(now.sub(startDate) > 5 days && now.sub(startDate) <= 6 days) {
amount = amount.mul(80);
} else if(now.sub(startDate) > 6 days && now.sub(startDate) <= 7 days) {
amount = amount.mul(75);
}
amount = amount.div(100);
totalSold = totalSold.add(amount);
users[msg.sender].accountBalance = users[msg.sender].accountBalance.add(amount);
allUsers.push(msg.sender);
owner.transfer(msg.value);
}
function returnAllTokens() public {
require(msg.sender == owner);
require(ableToClaim);
for (uint id = 0; id < allUsers.length; id++) {
address getAddressUser = allUsers[id];
uint256 value = users[getAddressUser].accountBalance;
users[getAddressUser].accountBalance = users[getAddressUser].accountBalance.sub(value);
if(value != 0){
Token.transfer(msg.sender, value);
}
}
}
function claimTokens() public {
require(ableToClaim);
uint256 value = users[msg.sender].accountBalance;
users[msg.sender].accountBalance = users[msg.sender].accountBalance.sub(value);
Token.transfer(msg.sender, value);
}
function openClaimSystem (bool _ableToClaim) public {
require(msg.sender == owner);
ableToClaim = _ableToClaim;
}
function closeSellSystem () public {
require(msg.sender == owner);
sellSystem = false;
}
function liqudity() public {
require(msg.sender == owner);
Token.transfer(msg.sender, Token.balanceOf(address(this)));
}
function availableTokens() public view returns(uint256) {
return Token.balanceOf(address(this));
}
function yourTokens() public view returns(uint256) {
return users[msg.sender].accountBalance;
}
function showTime() public view returns(uint256 _now, uint256 nextRound, uint256 timeToNextRound, uint256 percentPriceNow) {
uint256 price = 150;
if (now.sub(startDate) <= 2 days) {
price = 100;
} else if(now.sub(startDate) > 2 days && now.sub(startDate) <= 3 days) {
price = 105;
} else if(now.sub(startDate) > 3 days && now.sub(startDate) <= 4 days) {
price = 110;
} else if(now.sub(startDate) > 4 days && now.sub(startDate) <= 5 days) {
price = 115;
} else if(now.sub(startDate) > 5 days && now.sub(startDate) <= 6 days) {
price = 120;
} else if(now.sub(startDate) > 6 days && now.sub(startDate) <= 7 days) {
price = 125;
}
return (now, startDate, now.sub(startDate), price);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1013,
12943,
28199,
18098,
21466,
12002,
2063,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
999,
1027,
1014,
1007,
1025,
2709,
1037,
1003,
1038,
1025,
1065,
1065,
8278,
9413,
2278,
11387,
1063,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
1065,
3206,
12943,
28199,
18098,
21466,
12002,
2063,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
21318,
3372,
17788,
2575,
2270,
21948,
11614,
1025,
9413,
2278,
11387,
2270,
19204,
1025,
4769,
3477,
3085,
2270,
3954,
1025,
21318,
3372,
17788,
2575,
2270,
5377,
26066,
2015,
1027,
2324,
1025,
21318,
3372,
17788,
2575,
2797,
5377,
1035,
11718,
1027,
2184,
1008,
1008,
26066,
2015,
1025,
21318,
3372,
17788,
2575,
2270,
2707,
13701,
1025,
22017,
2140,
2583,
3406,
25154,
1025,
22017,
2140,
15187,
27268,
6633,
1025,
2358,
6820,
6593,
5310,
1063,
21318,
3372,
17788,
2575,
4070,
26657,
1025,
1065,
12375,
1006,
4769,
1027,
1028,
5310,
1007,
2270,
5198,
1025,
4769,
1031,
1033,
2270,
2035,
20330,
2015,
1025,
9570,
2953,
1006,
4769,
19204,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
19204,
1027,
9413,
2278,
11387,
1006,
19204,
1007,
1025,
2583,
3406,
25154,
1027,
6270,
1025,
15187,
27268,
6633,
1027,
2995,
1025,
2707,
13701,
1027,
2085,
1025,
1065,
3853,
9002,
1006,
1007,
6327,
3477,
3085,
1063,
5478,
1006,
15187,
27268,
6633,
1007,
1025,
5478,
1006,
5796,
2290,
1012,
3643,
1028,
1027,
1014,
1012,
5890,
28855,
1007,
1025,
21318,
3372,
17788,
2575,
3815,
1027,
5796,
2290,
1012,
3643,
1025,
2065,
1006,
2085,
1012,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-10
*/
pragma solidity ^0.5.16;
contract ChainlinkLike {
function latestAnswer() external view returns(int);
}
contract BudConnectorLike {
function read(bytes32 ilk) external view returns (bytes32);
}
contract BChainlinkInfo {
address constant ADMIN = 0xf7D44D5a28d5AF27a7F9c8fc6eFe0129e554d7c4;
address constant POOL_ADMIN = 0x7Ba651De9B7186F6F9665cf5Cc0f19e491dB3538;
mapping(bytes32 => address) public chainlink;
function setChainlink(bytes32 ilk, address c) external {
if(chainlink[ilk] == address(0)) require(msg.sender == ADMIN, "!admin");
else require(msg.sender == POOL_ADMIN, "!poolAdmin");
chainlink[ilk] = c;
}
function latestAnswer(bytes32 ilk) external view returns(int) {
return ChainlinkLike(chainlink[ilk]).latestAnswer();
}
}
contract BudInfo {
address constant ADMIN = 0xf7D44D5a28d5AF27a7F9c8fc6eFe0129e554d7c4;
address constant POOL_ADMIN = 0x7Ba651De9B7186F6F9665cf5Cc0f19e491dB3538;
BudConnectorLike BUD_CONNECTOR = BudConnectorLike(0x2325aa20DEAa9770a978f1dc7C073589ffC79DC3);
mapping(address => bool) public auth;
function authorize(address c) external {
require(msg.sender == ADMIN, "!admin");
auth[c] = true;
}
function deauthorize(address c) external {
require(msg.sender == POOL_ADMIN, "!poolAdmin");
auth[c] = false;
}
function latestAnswer(bytes32 ilk) external view returns(int) {
require(auth[msg.sender], "!auth");
return int(uint(BUD_CONNECTOR.read(ilk)));
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2184,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
3206,
4677,
13767,
10359,
1063,
3853,
6745,
6962,
13777,
1006,
1007,
6327,
3193,
5651,
1006,
20014,
1007,
1025,
1065,
3206,
13007,
8663,
2638,
16761,
10359,
1063,
3853,
3191,
1006,
27507,
16703,
6335,
2243,
1007,
6327,
3193,
5651,
1006,
27507,
16703,
1007,
1025,
1065,
3206,
4647,
10932,
20554,
19839,
2378,
14876,
1063,
4769,
5377,
4748,
10020,
1027,
1014,
2595,
2546,
2581,
2094,
22932,
2094,
2629,
2050,
22407,
2094,
2629,
10354,
22907,
2050,
2581,
2546,
2683,
2278,
2620,
11329,
2575,
27235,
24096,
24594,
2063,
24087,
2549,
2094,
2581,
2278,
2549,
1025,
4769,
5377,
4770,
1035,
4748,
10020,
1027,
1014,
2595,
2581,
3676,
26187,
2487,
3207,
2683,
2497,
2581,
15136,
2575,
2546,
2575,
2546,
2683,
28756,
2629,
2278,
2546,
2629,
9468,
2692,
2546,
16147,
2063,
26224,
2487,
18939,
19481,
22025,
1025,
12375,
1006,
27507,
16703,
1027,
1028,
4769,
1007,
2270,
4677,
13767,
1025,
3853,
2275,
24925,
20554,
19839,
1006,
27507,
16703,
6335,
2243,
1010,
4769,
1039,
1007,
6327,
1063,
2065,
1006,
4677,
13767,
1031,
6335,
2243,
1033,
1027,
1027,
4769,
1006,
1014,
1007,
1007,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4748,
10020,
1010,
1000,
999,
4748,
10020,
1000,
1007,
1025,
2842,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4770,
1035,
4748,
10020,
1010,
1000,
999,
4770,
4215,
10020,
1000,
1007,
1025,
4677,
13767,
1031,
6335,
2243,
1033,
1027,
1039,
1025,
1065,
3853,
6745,
6962,
13777,
1006,
27507,
16703,
6335,
2243,
1007,
6327,
3193,
5651,
1006,
20014,
1007,
1063,
2709,
4677,
13767,
10359,
1006,
4677,
13767,
1031,
6335,
2243,
1033,
1007,
1012,
6745,
6962,
13777,
1006,
1007,
1025,
1065,
1065,
3206,
13007,
2378,
14876,
1063,
4769,
5377,
4748,
10020,
1027,
1014,
2595,
2546,
2581,
2094,
22932,
2094,
2629,
2050,
22407,
2094,
2629,
10354,
22907,
2050,
2581,
2546,
2683,
2278,
2620,
11329,
2575,
27235,
24096,
24594,
2063,
24087,
2549,
2094,
2581,
2278,
2549,
1025,
4769,
5377,
4770,
1035,
4748,
10020,
1027,
1014,
2595,
2581,
3676,
26187,
2487,
3207,
2683,
2497,
2581,
15136,
2575,
2546,
2575,
2546,
2683,
28756,
2629,
2278,
2546,
2629,
9468,
2692,
2546,
16147,
2063,
26224,
2487,
18939,
19481,
22025,
1025,
13007,
8663,
2638,
16761,
10359,
13007,
1035,
19400,
1027,
13007,
8663,
2638,
16761,
10359,
1006,
1014,
2595,
21926,
17788,
11057,
11387,
3207,
11057,
2683,
2581,
19841,
2050,
2683,
2581,
2620,
2546,
2487,
16409,
2581,
2278,
2692,
2581,
19481,
2620,
2683,
4246,
2278,
2581,
2683,
16409,
2509,
1007,
1025,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
2270,
8740,
2705,
1025,
3853,
3166,
4697,
1006,
4769,
1039,
1007,
6327,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4748,
10020,
1010,
1000,
999,
4748,
10020,
1000,
1007,
1025,
8740,
2705,
1031,
1039,
1033,
1027,
2995,
1025,
1065,
3853,
26709,
14317,
10050,
4371,
1006,
4769,
1039,
1007,
6327,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4770,
1035,
4748,
10020,
1010,
1000,
999,
4770,
4215,
10020,
1000,
1007,
1025,
8740,
2705,
1031,
1039,
1033,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-16
*/
pragma solidity ^0.5.0;
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
//
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract SmudgeProtocolToken is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals;
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
constructor() public {
name = "SMUDGE PROTOCOLV2";
symbol = "SMUDGE";
decimals = 18;
_totalSupply = 1000000000000000000000000;
balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2385,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
9413,
2278,
19204,
3115,
1001,
2322,
8278,
1013,
1013,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
3075,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-09-06
*/
/**
*Submitted for verification at Etherscan.io on 2021-09-06
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length)
internal
pure
returns (string memory)
{
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(
address indexed owner,
address indexed approved,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId)
external
view
returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator)
external
view
returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
external
view
returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(
data
);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data)
internal
view
returns (bytes memory)
{
return
functionStaticCall(
target,
data,
"Address: low-level static call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return
functionDelegateCall(
target,
data,
"Address: low-level delegate call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
abstract contract ContextMixin {
function msgSender() internal view returns (address payable sender) {
if (msg.sender == address(this)) {
bytes memory array = msg.data;
uint256 index = msg.data.length;
assembly {
// Load the 32 bytes word from memory with the address on the lower 20 bytes, and mask those.
sender := and(
mload(add(array, index)),
0xffffffffffffffffffffffffffffffffffffffff
)
}
} else {
sender = payable(msg.sender);
}
return sender;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override
returns (bool)
{
return interfaceId == type(IERC165).interfaceId;
}
}
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner)
public
view
virtual
override
returns (uint256)
{
require(
owner != address(0),
"ERC721: balance query for the zero address"
);
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId)
public
view
virtual
override
returns (address)
{
address owner = _owners[tokenId];
require(
owner != address(0),
"ERC721: owner query for nonexistent token"
);
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId)
public
view
virtual
override
returns (address)
{
require(
_exists(tokenId),
"ERC721: approved query for nonexistent token"
);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
virtual
override
{
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId)
internal
view
virtual
returns (bool)
{
require(
_exists(tokenId),
"ERC721: operator query for nonexistent token"
);
address owner = ERC721.ownerOf(tokenId);
return (spender == owner ||
getApproved(tokenId) == spender ||
isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(
ERC721.ownerOf(tokenId) == from,
"ERC721: transfer of token that is not own"
);
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
_data
)
returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert(
"ERC721: transfer to non ERC721Receiver implementer"
);
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(IERC165, ERC721)
returns (bool)
{
return
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
virtual
override
returns (uint256)
{
require(
index < ERC721.balanceOf(owner),
"ERC721Enumerable: owner index out of bounds"
);
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index)
public
view
virtual
override
returns (uint256)
{
require(
index < ERC721Enumerable.totalSupply(),
"ERC721Enumerable: global index out of bounds"
);
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId)
private
{
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
contract Initializable {
bool inited = false;
modifier initializer() {
require(!inited, "already inited");
_;
inited = true;
}
}
contract Migrations {
address public owner;
uint public last_completed_migration;
constructor() {
owner = msg.sender;
}
modifier restricted() {
if (msg.sender == owner) _;
}
function setCompleted(uint completed) public restricted {
last_completed_migration = completed;
}
function upgrade(address new_address) public restricted {
Migrations upgraded = Migrations(new_address);
upgraded.setCompleted(last_completed_migration);
}
}
contract EIP712Base is Initializable {
struct EIP712Domain {
string name;
string version;
address verifyingContract;
bytes32 salt;
}
string public constant ERC712_VERSION = "1";
bytes32 internal constant EIP712_DOMAIN_TYPEHASH =
keccak256(
bytes(
"EIP712Domain(string name,string version,address verifyingContract,bytes32 salt)"
)
);
bytes32 internal domainSeperator;
// supposed to be called once while initializing.
// one of the contracts that inherits this contract follows proxy pattern
// so it is not possible to do this in a constructor
function _initializeEIP712(string memory name) internal initializer {
_setDomainSeperator(name);
}
function _setDomainSeperator(string memory name) internal {
domainSeperator = keccak256(
abi.encode(
EIP712_DOMAIN_TYPEHASH,
keccak256(bytes(name)),
keccak256(bytes(ERC712_VERSION)),
address(this),
bytes32(getChainId())
)
);
}
function getDomainSeperator() public view returns (bytes32) {
return domainSeperator;
}
function getChainId() public view returns (uint256) {
uint256 id;
assembly {
id := chainid()
}
return id;
}
/**
* Accept message hash and returns hash message in EIP712 compatible form
* So that it can be used to recover signer from signature signed using EIP712 formatted data
* https://eips.ethereum.org/EIPS/eip-712
* "\\x19" makes the encoding deterministic
* "\\x01" is the version byte to make it compatible to EIP-191
*/
function toTypedMessageHash(bytes32 messageHash)
internal
view
returns (bytes32)
{
return
keccak256(
abi.encodePacked("\x19\x01", getDomainSeperator(), messageHash)
);
}
}
contract NativeMetaTransaction is EIP712Base {
using SafeMath for uint256;
bytes32 private constant META_TRANSACTION_TYPEHASH =
keccak256(
bytes(
"MetaTransaction(uint256 nonce,address from,bytes functionSignature)"
)
);
event MetaTransactionExecuted(
address userAddress,
address payable relayerAddress,
bytes functionSignature
);
mapping(address => uint256) nonces;
/*
* Meta transaction structure.
* No point of including value field here as if user is doing value transfer then he has the funds to pay for gas
* He should call the desired function directly in that case.
*/
struct MetaTransaction {
uint256 nonce;
address from;
bytes functionSignature;
}
function executeMetaTransaction(
address userAddress,
bytes memory functionSignature,
bytes32 sigR,
bytes32 sigS,
uint8 sigV
) public payable returns (bytes memory) {
MetaTransaction memory metaTx = MetaTransaction({
nonce: nonces[userAddress],
from: userAddress,
functionSignature: functionSignature
});
require(
verify(userAddress, metaTx, sigR, sigS, sigV),
"Signer and signature do not match"
);
// increase nonce for user (to avoid re-use)
nonces[userAddress] = nonces[userAddress].add(1);
emit MetaTransactionExecuted(
userAddress,
payable(msg.sender),
functionSignature
);
// Append userAddress and relayer address at the end to extract it from calling context
(bool success, bytes memory returnData) = address(this).call(
abi.encodePacked(functionSignature, userAddress)
);
require(success, "Function call not successful");
return returnData;
}
function hashMetaTransaction(MetaTransaction memory metaTx)
internal
pure
returns (bytes32)
{
return
keccak256(
abi.encode(
META_TRANSACTION_TYPEHASH,
metaTx.nonce,
metaTx.from,
keccak256(metaTx.functionSignature)
)
);
}
function getNonce(address user) public view returns (uint256 nonce) {
nonce = nonces[user];
}
function verify(
address signer,
MetaTransaction memory metaTx,
bytes32 sigR,
bytes32 sigS,
uint8 sigV
) internal view returns (bool) {
require(signer != address(0), "NativeMetaTransaction: INVALID_SIGNER");
return
signer ==
ecrecover(
toTypedMessageHash(hashMetaTransaction(metaTx)),
sigV,
sigR,
sigS
);
}
}
contract InvaderAcademy is
ContextMixin,
ERC721Enumerable,
NativeMetaTransaction,
Ownable
{
using SafeMath for uint256;
uint256 private _currentTokenId = 0;
uint256 MAX_SUPPLY = 7777;
string public baseTokenURI;
uint256 public NFT_price = 0.042 ether;
uint256 public startTime = block.timestamp;
address public teslaOwner;
string _name = "InvaderAcademy";
string _symbol = "IA";
constructor(
) ERC721(_name, _symbol) {
// baseTokenURI = _uri;
_initializeEIP712(_name);
}
function set_start_time(uint256 time) external onlyOwner{
startTime = time;
}
/**
* @dev Mints a token to an address with a tokenURI.
* @param _to address of the future owner of the token
*/
function mintTo(address _to) public onlyOwner {
require(_currentTokenId < MAX_SUPPLY, "Max Supply Reached");
uint256 newTokenId = _getNextTokenId();
_mint(_to, newTokenId);
_incrementTokenId();
}
function buy() public payable {
require(block.timestamp >= startTime, "It's not time yet");
require(msg.value == NFT_price, "Sent Amount Not Enough");
require(_currentTokenId < MAX_SUPPLY, "Max Supply Reached");
uint256 newTokenId = _getNextTokenId();
_mint(msg.sender, newTokenId);
_incrementTokenId();
}
function withdraw() external onlyOwner {
payable(owner()).transfer(address(this).balance);
}
/**
* @dev calculates the next token ID based on value of _currentTokenId
* @return uint256 for the next token ID
*/
function _getNextTokenId() private view returns (uint256) {
return _currentTokenId.add(1);
}
function randomHash() internal view returns (uint256) {
bytes32 txHash = keccak256(
abi.encode(block.coinbase, block.timestamp, block.difficulty)
);
return uint256(txHash);
}
/**
* @dev increments the value of _currentTokenId,When all 9,788 Ghosts are sold out, a randomHash Ghost NFT owner will win a Tesla Model Y. The more NFT owned, the bigger the chance.
*/
function _incrementTokenId() private {
require(_currentTokenId < MAX_SUPPLY);
_currentTokenId++;
if (_currentTokenId == MAX_SUPPLY - 1) {
uint256 rand = randomHash() % 1000;
bytes32 txHash = keccak256(
abi.encode(
ownerOf(_currentTokenId - 1000 + rand),
ownerOf(_currentTokenId - 2000 + rand),
ownerOf(_currentTokenId - 3000 + rand),
ownerOf(_currentTokenId - 4000 + rand),
ownerOf(_currentTokenId - 5000 + rand),
ownerOf(_currentTokenId - 6000 + rand),
ownerOf(_currentTokenId - 7000 + rand),
ownerOf(_currentTokenId - 8000 + rand),
ownerOf(_currentTokenId - 9000 + rand),
ownerOf(_currentTokenId - 10000 + rand),
ownerOf(_currentTokenId - 11000 + rand),
msg.sender
)
);
teslaOwner = ownerOf((uint256(txHash) % MAX_SUPPLY) );
}
}
/**
* @dev change the baseGhostURI if there are future problems with the API service
*/
function setBaseUri(string memory _uri) external onlyOwner {
baseTokenURI = _uri;
}
function tokenURI(uint256 _tokenId)
public
view
override
returns (string memory)
{
return
string(abi.encodePacked(baseTokenURI, Strings.toString(_tokenId)));
}
/**
* This is used instead of msg.sender as transactions won't be sent by the original token owner, but by OpenSea.
*/
function _msgSender() internal view override returns (address sender) {
return ContextMixin.msgSender();
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
5757,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
5757,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
2065,
1006,
1039,
1026,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
20528,
7542,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
2065,
1006,
1038,
1028,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1037,
1011,
1038,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
2709,
1006,
2995,
1010,
1014,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
2065,
1006,
1039,
1013,
1037,
999,
1027,
1038,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2407,
1997,
2048,
27121,
24028,
1010,
2007,
1037,
2407,
2011,
5717,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
4305,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
2065,
1006,
1038,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-30
*/
// SPDX-License-Identifier: MIT
// Contract rugs bots - dont buy
pragma solidity ^0.6.0;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract NTOKEN is Ownable, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply = 1000000e18;
string private _name = 'NTOKEN';
string private _symbol = 'NTOKEN';
uint8 private _decimals = 18;
uint256 public maxTxAmount = 10000e9;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor () public {
_mint(_msgSender(), _totalSupply);
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
if(sender != owner() && recipient != owner())
require(amount <= maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
function setMaxTxAmount(uint256 _maxTxAmount) external onlyOwner() {
require(_maxTxAmount >= 10000e9 , 'maxTxAmount should be greater than 10000e9');
maxTxAmount = _maxTxAmount;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
2382,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
3206,
20452,
2015,
28516,
2015,
1011,
2123,
2102,
4965,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1005,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-02-04
*/
// File: @openzeppelin/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: contracts/InulandStaking.sol
//SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
/**
* @title Inuland Staking Contract
* @author Inuland Dev
*/
library Array {
/**
* @notice remove given elements from array
* @dev usable only if _array contains unique elements only
*/
function removeElement(uint256[] storage _array, uint256 _element) public {
for (uint256 i; i < _array.length; i++) {
if (_array[i] == _element) {
_array[i] = _array[_array.length - 1];
_array.pop();
break;
}
}
}
}
contract InulandStaking is ERC20("INUS", "INUS"), Ownable {
using SafeMath for uint256;
using Address for address;
using Array for uint256[];
/**
* @notice Keeping track of user and its token
*/
struct UserInfo {
uint256[] stakedTokens;
// TokenId => Locked Days
mapping(uint256 => uint256) lockedDays;
// TokenId => Block time
mapping(uint256 => uint256) stakedDate;
uint256 amountStaked;
mapping(uint256 => uint256) lastRewardUpdated;
}
/**
* @notice map User Addresses to their info
*/
mapping(address => UserInfo) public stakeUserInfo;
/**
* @notice staked nft => user address
*/
mapping(uint256 => address) public tokenOwners;
address InulandCollectionAddress;
address private contractExtension;
uint256 dailyReward = 1 ether;
uint256[] boosters = [102, 104, 105, 106, 107, 108, 109];
uint256[] miningPower;
uint256 rewardInterwal = 86400;
modifier onlyExtensionContract() {
require(msg.sender == contractExtension);
_;
}
//initital minting for Launch pads | Liquidity
function mint(address _to, uint256 _amount) public onlyOwner {
_mint(_to, _amount);
}
function setRewardInterval(uint256 _interval) public onlyOwner{
rewardInterwal = _interval;
}
//extending functions for Furture upgrades
function setContractExtension(address _contractExtenstion)
public
onlyOwner
{
contractExtension = _contractExtenstion;
}
function mintFromExtentionContract(address _to, uint256 _amount)
external
onlyExtensionContract
{
_mint(_to, _amount);
}
function burnFromExtentionContract(address _to, uint256 _amount)
external
onlyExtensionContract
{
_burn(_to, _amount);
}
constructor(address _inulandCollectionAddress) {
InulandCollectionAddress = _inulandCollectionAddress;
}
function setMiningPowerData(uint256[] memory _miningPowerData)
public
onlyOwner
{
miningPower = _miningPowerData;
}
function setBooster(uint256[] memory _booster) public onlyOwner {
boosters = _booster;
}
function setDailyReward(uint256 _dailyReward) public onlyOwner {
//wei
dailyReward = _dailyReward;
}
function stake(uint256 _id, uint256 _lockedDays) public {
_stake(msg.sender, _id, _lockedDays);
}
function batchStake(uint256[] memory _ids, uint256 _lockedDays) public {
for (uint256 i = 0; i < _ids.length; ++i) {
_stake(msg.sender, _ids[i], _lockedDays);
}
}
function unstake(uint256 _id) public {
_unstake(msg.sender, _id);
}
function batchUnstake(uint256[] memory _ids) public {
for (uint256 i = 0; i < _ids.length; ++i) {
_unstake(msg.sender, _ids[i]);
}
}
function getMiningPower(uint256 _token) public view returns (uint256) {
if (_token != 0) {
return miningPower[_token - 1];
} else {
return 0;
}
}
function claimRewards() public {
uint256 rewards = getStakingRewards(msg.sender);
_mint(msg.sender, rewards);
//update last reward date
_updateLastUpdated(msg.sender);
}
function _updateLastUpdated(address _user) internal {
UserInfo storage user = stakeUserInfo[_user];
for (uint256 i; i < user.stakedTokens.length; i++) {
user.lastRewardUpdated[user.stakedTokens[i]] = block.timestamp;
}
}
function getStakingRewards(address _user) public view returns (uint256) {
uint256 time = block.timestamp;
UserInfo storage user = stakeUserInfo[_user];
uint256 clamableRewards;
for (uint256 i; i < user.stakedTokens.length; i++) {
if (user.stakedTokens[i] != 0) {
uint256 nftMiningPower = getMiningPower(user.stakedTokens[i]);
//first time
if (user.lastRewardUpdated[user.stakedTokens[i]] == 0) {
if (user.stakedDate[user.stakedTokens[i]] == 0) {
clamableRewards += 0;
} else {
uint256 normalReward = dailyReward
.mul(
time.sub(user.stakedDate[user.stakedTokens[i]])
)
.div(rewardInterwal)
.mul(nftMiningPower);
//calculate locked day rewards
if (user.lockedDays[user.stakedTokens[i]] == 14) {
clamableRewards += (normalReward * 112) / 100;
} else if (
user.lockedDays[user.stakedTokens[i]] == 30
) {
clamableRewards += (normalReward * 140) / 100;
} else if (
user.lockedDays[user.stakedTokens[i]] == 60
) {
clamableRewards += (normalReward * 180) / 100;
} else if (
user.lockedDays[user.stakedTokens[i]] == 90
) {
clamableRewards += (normalReward * 200) / 100;
} else {
clamableRewards += (normalReward * 112) / 100;
}
}
} else {
//calculate rewards from the last reward updated date
uint256 normalReward = dailyReward
.mul(
time.sub(
user.lastRewardUpdated[user.stakedTokens[i]]
)
)
.div(rewardInterwal);
//calculate locked day rewards
if (user.lockedDays[user.stakedTokens[i]] == 14) {
clamableRewards += (normalReward * 112) / 100;
} else if (user.lockedDays[user.stakedTokens[i]] == 30) {
clamableRewards += (normalReward * 140) / 100;
} else if (user.lockedDays[user.stakedTokens[i]] == 60) {
clamableRewards += (normalReward * 180) / 100;
} else if (user.lockedDays[user.stakedTokens[i]] == 90) {
clamableRewards += (normalReward * 200) / 100;
} else {
clamableRewards += (normalReward * 112) / 100;
}
}
}
}
//booster rewards
// [102,104,105,106,107,108,109];
if (user.amountStaked >= 35) {
clamableRewards = clamableRewards.mul(boosters[6]).div(100);
} else if (user.amountStaked >= 30) {
clamableRewards = clamableRewards.mul(boosters[5]).div(100);
} else if (user.amountStaked >= 25) {
clamableRewards = clamableRewards.mul(boosters[4]).div(100);
} else if (user.amountStaked >= 20) {
clamableRewards = clamableRewards.mul(boosters[3]).div(100);
} else if (user.amountStaked >= 15) {
clamableRewards = clamableRewards.mul(boosters[2]).div(100);
} else if (user.amountStaked >= 10) {
clamableRewards = clamableRewards.mul(boosters[1]).div(100);
} else if (user.amountStaked >= 5) {
clamableRewards = clamableRewards.mul(boosters[0]).div(100);
}
return clamableRewards;
}
function _stake(
address _user,
uint256 _id,
uint256 _lockedDays
) internal {
UserInfo storage user = stakeUserInfo[_user];
IERC721(InulandCollectionAddress).transferFrom(
_user,
address(this),
_id
);
user.amountStaked += 1;
user.stakedDate[_id] = block.timestamp;
user.lockedDays[_id] = _lockedDays;
user.stakedTokens.push(_id);
tokenOwners[_id] = _user;
}
function whenUnstake(address _user, uint256 _id) public view returns (bool,uint256){
UserInfo storage user = stakeUserInfo[_user];
if( block.timestamp > (user.stakedDate[_id] + (user.lockedDays[_id] * rewardInterwal)) ){
return (true, block.timestamp - (user.stakedDate[_id] + (user.lockedDays[_id] * rewardInterwal)));
}else{
return (true, block.timestamp - (user.stakedDate[_id] + (user.lockedDays[_id] * rewardInterwal)));
}
}
function _unstake(address _user, uint256 _id) internal {
UserInfo storage user = stakeUserInfo[_user];
require(
tokenOwners[_id] == _user,
"Inuland._unstake: Sender doesn't owns this token"
);
//check locked
require( block.timestamp > (user.stakedDate[_id] + (user.lockedDays[_id] * rewardInterwal)), "You cant Unstake right now");
user.stakedTokens.removeElement(_id);
user.amountStaked -= 1;
delete tokenOwners[_id];
if (user.stakedTokens.length == 0) {
delete stakeUserInfo[_user];
}
IERC721(InulandCollectionAddress).transferFrom(
address(this),
_user,
_id
);
}
/*-------------------------------Functions for website-------------------------------*/
function getUserInfo(address _user) public view returns (uint256[] memory) {
UserInfo storage user = stakeUserInfo[_user];
return (user.stakedTokens);
}
function getLockedDays(uint256 _id) public view returns (uint256) {
UserInfo storage user = stakeUserInfo[tokenOwners[_id]];
return user.lockedDays[_id];
}
function getStakedDate(uint256 _id) public view returns (uint256) {
UserInfo storage user = stakeUserInfo[tokenOwners[_id]];
return user.stakedDate[_id];
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6185,
1011,
5840,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
14046,
1013,
1013,
2023,
2544,
1997,
3647,
18900,
2232,
2323,
2069,
2022,
2109,
2007,
5024,
3012,
1014,
1012,
1022,
2030,
2101,
1010,
1013,
1013,
2138,
2009,
16803,
2006,
1996,
21624,
1005,
1055,
2328,
1999,
2058,
12314,
14148,
1012,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
1012,
1008,
1008,
3602,
1024,
1036,
3647,
18900,
2232,
1036,
2003,
3227,
2025,
2734,
3225,
2007,
5024,
3012,
1014,
1012,
1022,
1010,
2144,
1996,
21624,
1008,
2085,
2038,
2328,
1999,
2058,
12314,
9361,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
4215,
2094,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
2065,
1006,
1039,
1026,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1039,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
20528,
7542,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
6342,
2497,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
2065,
1006,
1038,
1028,
1037,
1007,
2709,
1006,
6270,
1010,
1014,
1007,
1025,
2709,
1006,
2995,
1010,
1037,
1011,
1038,
1007,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
24856,
1997,
2048,
27121,
24028,
1010,
2007,
2019,
2058,
12314,
5210,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1018,
1012,
1035,
1008,
1013,
3853,
3046,
12274,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
22017,
2140,
1010,
21318,
3372,
17788,
2575,
1007,
1063,
4895,
5403,
18141,
1063,
1013,
1013,
3806,
20600,
1024,
2023,
2003,
16269,
2084,
9034,
1005,
1037,
1005,
2025,
2108,
5717,
1010,
2021,
1996,
1013,
1013,
5770,
2003,
2439,
2065,
1005,
1038,
1005,
2003,
2036,
7718,
1012,
1013,
1013,
2156,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
4139,
1013,
4720,
2475,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
2709,
1006,
2995,
1010,
1014,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-01-17
*/
// OpenZepplin contracts contained within are licensed under an MIT License.
// The MIT License (MIT)
// Copyright (c) 2016-2020 zOS Global Limited
// Permission is hereby granted, free of charge, to any person obtaining
// a copy of this software and associated documentation files (the
// "Software"), to deal in the Software without restriction, including
// without limitation the rights to use, copy, modify, merge, publish,
// distribute, sublicense, and/or sell copies of the Software, and to
// permit persons to whom the Software is furnished to do so, subject to
// the following conditions:
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
// IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
// CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
// SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
// File: https://raw.githubusercontent.com/OpenZeppelin/openzeppelin-contracts/master/contracts/math/SafeMath.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: https://raw.githubusercontent.com/OpenZeppelin/openzeppelin-contracts/master/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: https://raw.githubusercontent.com/OpenZeppelin/openzeppelin-contracts/master/contracts/GSN/Context.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: browser/ECAT.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ECAT is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
_mint(msg.sender, 100000000000000000000000000);
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5890,
1011,
2459,
1008,
1013,
1013,
1013,
2330,
4371,
9397,
4115,
8311,
4838,
2306,
2024,
7000,
2104,
2019,
10210,
6105,
1012,
1013,
1013,
1996,
10210,
6105,
1006,
10210,
1007,
1013,
1013,
9385,
1006,
1039,
1007,
2355,
1011,
12609,
1062,
2891,
3795,
3132,
1013,
1013,
6656,
2003,
2182,
3762,
4379,
1010,
2489,
1997,
3715,
1010,
2000,
2151,
2711,
11381,
1013,
1013,
1037,
6100,
1997,
2023,
4007,
1998,
3378,
12653,
6764,
1006,
1996,
1013,
1013,
1000,
4007,
1000,
1007,
1010,
2000,
3066,
1999,
1996,
4007,
2302,
16840,
1010,
2164,
1013,
1013,
2302,
22718,
1996,
2916,
2000,
2224,
1010,
6100,
1010,
19933,
1010,
13590,
1010,
10172,
1010,
1013,
1013,
16062,
1010,
4942,
13231,
12325,
1010,
1998,
1013,
2030,
5271,
4809,
1997,
1996,
4007,
1010,
1998,
2000,
1013,
1013,
9146,
5381,
2000,
3183,
1996,
4007,
2003,
19851,
2000,
2079,
2061,
1010,
3395,
2000,
1013,
1013,
1996,
2206,
3785,
1024,
1013,
1013,
1996,
2682,
9385,
5060,
1998,
2023,
6656,
5060,
4618,
2022,
2443,
1013,
1013,
1999,
2035,
4809,
2030,
6937,
8810,
1997,
1996,
4007,
1012,
1013,
1013,
1996,
4007,
2003,
3024,
1000,
2004,
2003,
1000,
1010,
2302,
10943,
2100,
1997,
2151,
2785,
1010,
4671,
1013,
1013,
2030,
13339,
1010,
2164,
2021,
2025,
3132,
2000,
1996,
10943,
3111,
1997,
1013,
1013,
6432,
8010,
1010,
10516,
2005,
1037,
3327,
3800,
1998,
2512,
2378,
19699,
23496,
3672,
1012,
1013,
1013,
1999,
2053,
2724,
4618,
1996,
6048,
2030,
9385,
13304,
2022,
20090,
2005,
2151,
1013,
1013,
4366,
1010,
12394,
2030,
2060,
14000,
1010,
3251,
1999,
2019,
2895,
1997,
3206,
1010,
1013,
1013,
17153,
2102,
2030,
4728,
1010,
17707,
2013,
1010,
2041,
1997,
2030,
1999,
4434,
2007,
1996,
1013,
1013,
4007,
2030,
1996,
2224,
2030,
2060,
24069,
1999,
1996,
4007,
1012,
1013,
1013,
5371,
1024,
16770,
1024,
1013,
1013,
6315,
1012,
21025,
2705,
12083,
20330,
8663,
6528,
2102,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
3040,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-02-18
*/
//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract SampleToken is IERC20 {
using SafeMath for uint256;
string public constant name = "Freedom Convoy Coin";
string public constant symbol = "FCC";
uint8 public constant decimals = 18;
mapping(address => uint256) balances;
mapping(address => mapping (address => uint256)) allowed;
uint256 totalSupply_;
constructor(uint256 total) {
totalSupply_ = total;
balances[msg.sender] = totalSupply_;
}
function totalSupply() public override view returns (uint256) {
return totalSupply_;
}
function balanceOf(address tokenOwner) public override view returns (uint256) {
return balances[tokenOwner];
}
function transfer(address receiver, uint256 numTokens) public override returns (bool) {
require(numTokens <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(numTokens);
balances[receiver] = balances[receiver].add(numTokens);
emit Transfer(msg.sender, receiver, numTokens);
return true;
}
function approve(address delegate, uint256 numTokens) public override returns (bool) {
allowed[msg.sender][delegate] = numTokens;
emit Approval(msg.sender, delegate, numTokens);
return true;
}
function allowance(address owner, address delegate) public override view returns (uint) {
return allowed[owner][delegate];
}
function transferFrom(address owner, address buyer, uint256 numTokens) public override returns (bool) {
require(numTokens <= balances[owner]);
require(numTokens <= allowed[owner][msg.sender]);
balances[owner] = balances[owner].sub(numTokens);
allowed[owner][msg.sender] = allowed[owner][msg.sender].sub(numTokens);
balances[buyer] = balances[buyer].add(numTokens);
emit Transfer(owner, buyer, numTokens);
return true;
}
}
library SafeMath {
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6185,
1011,
2324,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
7099,
18715,
2368,
2003,
29464,
11890,
11387,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
5164,
2270,
5377,
2171,
1027,
1000,
4071,
9549,
9226,
1000,
1025,
5164,
2270,
5377,
6454,
1027,
1000,
14420,
1000,
1025,
21318,
3372,
2620,
2270,
5377,
26066,
2015,
1027,
2324,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
3039,
1025,
21318,
3372,
17788,
2575,
21948,
6279,
22086,
1035,
1025,
9570,
2953,
1006,
21318,
3372,
17788,
2575,
2561,
1007,
1063,
21948,
6279,
22086,
1035,
1027,
2561,
1025,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
21948,
6279,
22086,
1035,
1025,
1065,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
2058,
15637,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
21948,
6279,
22086,
1035,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
2058,
15637,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
5703,
2015,
1031,
19204,
12384,
2121,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
8393,
1010,
21318,
3372,
17788,
2575,
16371,
20492,
11045,
3619,
1007,
2270,
2058,
15637,
5651,
1006,
22017,
2140,
1007,
1063,
5478,
1006,
16371,
20492,
11045,
3619,
1026,
1027,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1007,
1025,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1012,
4942,
1006,
16371,
20492,
11045,
3619,
1007,
1025,
5703,
2015,
1031,
8393,
1033,
1027,
5703,
2015,
1031,
8393,
1033,
1012,
5587,
1006,
16371,
20492,
11045,
3619,
1007,
1025,
12495,
2102,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
8393,
1010,
16371,
20492,
11045,
3619,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
14300,
1006,
4769,
11849,
1010,
21318,
3372,
17788,
2575,
16371,
20492,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-02-25
*/
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721URIStorage.sol
pragma solidity ^0.8.0;
/**
* @dev ERC721 token with storage based token URI management.
*/
abstract contract ERC721URIStorage is ERC721 {
using Strings for uint256;
// Optional mapping for token URIs
mapping(uint256 => string) private _tokenURIs;
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721URIStorage: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
string memory base = _baseURI();
// If there is no base URI, return the token URI.
if (bytes(base).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(base, _tokenURI));
}
return super.tokenURI(tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721URIStorage: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual override {
super._burn(tokenId);
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
}
}
// File: @openzeppelin/contracts/access/AccessControl.sol
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
function hasRole(bytes32 role, address account) external view returns (bool);
function getRoleAdmin(bytes32 role) external view returns (bytes32);
function grantRole(bytes32 role, address account) external;
function revokeRole(bytes32 role, address account) external;
function renounceRole(bytes32 role, address account) external;
}
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, getRoleAdmin(role), adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// File: @openzeppelin/contracts/utils/Counters.sol
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: contracts/WasderNFT.sol
pragma solidity 0.8.6;
// Ownable is needed to setup sales royalties on Open Sea
// if you are the owner of the contract you can configure sales Royalties in the Open Sea website
contract WasderNFT is ERC721Enumerable, ERC721URIStorage, AccessControl, Ownable {
constructor() ERC721("Wasder Loot Box", "WASLOOT") {
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(MINTER_ROLE, _msgSender());
}
uint256 internal _cap = 1000;
using Counters for Counters.Counter;
Counters.Counter private _tokenIds;
// Let's use OZ library to decorate addresses with extra methods
using Address for address;
string _baseTokenURI = "";
string mainTokenUri = "ipfs://QmQyR5Ptarnrw455NVkQTyyFhCDiBGBSUmZZMa1NhzK82H";
bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
// overrides
function supportsInterface(bytes4 interfaceId) public view virtual
override(ERC721Enumerable, ERC721, AccessControl) returns (bool) {
return super.supportsInterface(interfaceId);
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override(ERC721Enumerable, ERC721) {
super._beforeTokenTransfer(from, to, tokenId);
}
function _burn(uint256 tokenId) internal virtual override(ERC721URIStorage, ERC721) {
super._burn(tokenId);
}
function tokenURI(uint256 tokenId) public view virtual override(ERC721URIStorage, ERC721) returns (string memory) {
return mainTokenUri;
}
function getCurrentTokenId() public view returns (uint256) {
return _tokenIds.current();
}
// functions
function cap() external view returns (uint256) {
return _cap;
}
function _baseURI() internal view virtual override(ERC721) returns (string memory) {
return _baseTokenURI;
}
function setBaseURI(string memory baseURI) public {
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "Caller is not a admin");
_baseTokenURI = baseURI;
}
function setMainTokenURI(string memory _mainTokenURI) public {
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "Caller is not a admin");
mainTokenUri = _mainTokenURI;
}
function mintNextToken(address _mintTo) public returns (bool) {
_tokenIds.increment();
return mint(_mintTo, _tokenIds.current());
}
function mint(address _mintTo, uint256 _tokenId) public returns (bool) {
require(hasRole(MINTER_ROLE, _msgSender()), "Caller is not a minter");
require(_mintTo != address(0), "ERC721: mint to the zero address");
require(!_exists(_tokenId), "ERC721: token already minted");
require(_tokenId <= _cap, "Cap reached");
_safeMint(_mintTo, _tokenId);
return true;
}
function mintMany(address[] calldata _mintToList) public returns (bool) {
require(hasRole(MINTER_ROLE, _msgSender()), "Caller is not a minter");
for (uint256 i = 0; i < _mintToList.length; i++) {
require(_mintToList[i] != address(0), "ERC721: mint to the zero address");
}
for (uint256 i = 0; i < _mintToList.length; i++) {
if (_mintToList[i].isContract()) {
continue;
}
mintNextToken(_mintToList[i]);
}
return true;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6185,
1011,
2423,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
1996,
1036,
19204,
3593,
1036,
19204,
1012,
1008,
1013,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
2030,
4487,
19150,
2015,
1006,
1036,
4844,
1036,
1007,
1036,
6872,
1036,
2000,
6133,
2035,
1997,
2049,
7045,
1012,
1008,
1013,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
6872,
1010,
22017,
2140,
4844,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2193,
1997,
19204,
2015,
1999,
1036,
1036,
3954,
1036,
1036,
1005,
1055,
4070,
1012,
1008,
1013,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-28
*/
pragma solidity ^0.8.9;
// SPDX-License-Identifier: NONE
//
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
//
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
//
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
//
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
//
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
//
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/ERC20.sol)
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, _allowances[owner][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = _allowances[owner][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
}
_balances[to] += amount;
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Spend `amount` form the allowance of `owner` toward `spender`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
//
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
//
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
//
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/ECDSA.sol)
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} else if (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
uint8 v = uint8((uint256(vs) >> 255) + 27);
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v != 27 && v != 28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
//
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/draft-EIP712.sol)
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
*
* The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
* thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
* they need in their contracts using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* _Available since v3.4._
*/
abstract contract EIP712 {
/* solhint-disable var-name-mixedcase */
// Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
// invalidate the cached domain separator if the chain id changes.
bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
uint256 private immutable _CACHED_CHAIN_ID;
address private immutable _CACHED_THIS;
bytes32 private immutable _HASHED_NAME;
bytes32 private immutable _HASHED_VERSION;
bytes32 private immutable _TYPE_HASH;
/* solhint-enable var-name-mixedcase */
/**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/
constructor(string memory name, string memory version) {
bytes32 hashedName = keccak256(bytes(name));
bytes32 hashedVersion = keccak256(bytes(version));
bytes32 typeHash = keccak256(
"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
);
_HASHED_NAME = hashedName;
_HASHED_VERSION = hashedVersion;
_CACHED_CHAIN_ID = block.chainid;
_CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
_CACHED_THIS = address(this);
_TYPE_HASH = typeHash;
}
/**
* @dev Returns the domain separator for the current chain.
*/
function _domainSeparatorV4() internal view returns (bytes32) {
if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {
return _CACHED_DOMAIN_SEPARATOR;
} else {
return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
}
}
function _buildDomainSeparator(
bytes32 typeHash,
bytes32 nameHash,
bytes32 versionHash
) private view returns (bytes32) {
return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/
function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
}
}
//
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
//
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-ERC20Permit.sol)
/**
* @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*
* _Available since v3.4._
*/
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
using Counters for Counters.Counter;
mapping(address => Counters.Counter) private _nonces;
// solhint-disable-next-line var-name-mixedcase
bytes32 private immutable _PERMIT_TYPEHASH =
keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
/**
* @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
*
* It's a good idea to use the same `name` that is defined as the ERC20 token name.
*/
constructor(string memory name) EIP712(name, "1") {}
/**
* @dev See {IERC20Permit-permit}.
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public virtual override {
require(block.timestamp <= deadline, "ERC20Permit: expired deadline");
bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));
bytes32 hash = _hashTypedDataV4(structHash);
address signer = ECDSA.recover(hash, v, r, s);
require(signer == owner, "ERC20Permit: invalid signature");
_approve(owner, spender, value);
}
/**
* @dev See {IERC20Permit-nonces}.
*/
function nonces(address owner) public view virtual override returns (uint256) {
return _nonces[owner].current();
}
/**
* @dev See {IERC20Permit-DOMAIN_SEPARATOR}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view override returns (bytes32) {
return _domainSeparatorV4();
}
/**
* @dev "Consume a nonce": return the current value and increment.
*
* _Available since v4.1._
*/
function _useNonce(address owner) internal virtual returns (uint256 current) {
Counters.Counter storage nonce = _nonces[owner];
current = nonce.current();
nonce.increment();
}
}
//
// OpenZeppelin Contracts (last updated v4.5.0) (utils/math/Math.sol)
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a / b + (a % b == 0 ? 0 : 1);
}
}
//
// OpenZeppelin Contracts v4.4.1 (utils/Arrays.sol)
/**
* @dev Collection of functions related to array types.
*/
library Arrays {
/**
* @dev Searches a sorted `array` and returns the first index that contains
* a value greater or equal to `element`. If no such index exists (i.e. all
* values in the array are strictly less than `element`), the array length is
* returned. Time complexity O(log n).
*
* `array` is expected to be sorted in ascending order, and to contain no
* repeated elements.
*/
function findUpperBound(uint256[] storage array, uint256 element) internal view returns (uint256) {
if (array.length == 0) {
return 0;
}
uint256 low = 0;
uint256 high = array.length;
while (low < high) {
uint256 mid = Math.average(low, high);
// Note that mid will always be strictly less than high (i.e. it will be a valid array index)
// because Math.average rounds down (it does integer division with truncation).
if (array[mid] > element) {
high = mid;
} else {
low = mid + 1;
}
}
// At this point `low` is the exclusive upper bound. We will return the inclusive upper bound.
if (low > 0 && array[low - 1] == element) {
return low - 1;
} else {
return low;
}
}
}
//
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/ERC20Snapshot.sol)
/**
* @dev This contract extends an ERC20 token with a snapshot mechanism. When a snapshot is created, the balances and
* total supply at the time are recorded for later access.
*
* This can be used to safely create mechanisms based on token balances such as trustless dividends or weighted voting.
* In naive implementations it's possible to perform a "double spend" attack by reusing the same balance from different
* accounts. By using snapshots to calculate dividends or voting power, those attacks no longer apply. It can also be
* used to create an efficient ERC20 forking mechanism.
*
* Snapshots are created by the internal {_snapshot} function, which will emit the {Snapshot} event and return a
* snapshot id. To get the total supply at the time of a snapshot, call the function {totalSupplyAt} with the snapshot
* id. To get the balance of an account at the time of a snapshot, call the {balanceOfAt} function with the snapshot id
* and the account address.
*
* NOTE: Snapshot policy can be customized by overriding the {_getCurrentSnapshotId} method. For example, having it
* return `block.number` will trigger the creation of snapshot at the begining of each new block. When overridding this
* function, be careful about the monotonicity of its result. Non-monotonic snapshot ids will break the contract.
*
* Implementing snapshots for every block using this method will incur significant gas costs. For a gas-efficient
* alternative consider {ERC20Votes}.
*
* ==== Gas Costs
*
* Snapshots are efficient. Snapshot creation is _O(1)_. Retrieval of balances or total supply from a snapshot is _O(log
* n)_ in the number of snapshots that have been created, although _n_ for a specific account will generally be much
* smaller since identical balances in subsequent snapshots are stored as a single entry.
*
* There is a constant overhead for normal ERC20 transfers due to the additional snapshot bookkeeping. This overhead is
* only significant for the first transfer that immediately follows a snapshot for a particular account. Subsequent
* transfers will have normal cost until the next snapshot, and so on.
*/
abstract contract ERC20Snapshot is ERC20 {
// Inspired by Jordi Baylina's MiniMeToken to record historical balances:
// https://github.com/Giveth/minimd/blob/ea04d950eea153a04c51fa510b068b9dded390cb/contracts/MiniMeToken.sol
using Arrays for uint256[];
using Counters for Counters.Counter;
// Snapshotted values have arrays of ids and the value corresponding to that id. These could be an array of a
// Snapshot struct, but that would impede usage of functions that work on an array.
struct Snapshots {
uint256[] ids;
uint256[] values;
}
mapping(address => Snapshots) private _accountBalanceSnapshots;
Snapshots private _totalSupplySnapshots;
// Snapshot ids increase monotonically, with the first value being 1. An id of 0 is invalid.
Counters.Counter private _currentSnapshotId;
/**
* @dev Emitted by {_snapshot} when a snapshot identified by `id` is created.
*/
event Snapshot(uint256 id);
/**
* @dev Creates a new snapshot and returns its snapshot id.
*
* Emits a {Snapshot} event that contains the same id.
*
* {_snapshot} is `internal` and you have to decide how to expose it externally. Its usage may be restricted to a
* set of accounts, for example using {AccessControl}, or it may be open to the public.
*
* [WARNING]
* ====
* While an open way of calling {_snapshot} is required for certain trust minimization mechanisms such as forking,
* you must consider that it can potentially be used by attackers in two ways.
*
* First, it can be used to increase the cost of retrieval of values from snapshots, although it will grow
* logarithmically thus rendering this attack ineffective in the long term. Second, it can be used to target
* specific accounts and increase the cost of ERC20 transfers for them, in the ways specified in the Gas Costs
* section above.
*
* We haven't measured the actual numbers; if this is something you're interested in please reach out to us.
* ====
*/
function _snapshot() internal virtual returns (uint256) {
_currentSnapshotId.increment();
uint256 currentId = _getCurrentSnapshotId();
emit Snapshot(currentId);
return currentId;
}
/**
* @dev Get the current snapshotId
*/
function _getCurrentSnapshotId() internal view virtual returns (uint256) {
return _currentSnapshotId.current();
}
/**
* @dev Retrieves the balance of `account` at the time `snapshotId` was created.
*/
function balanceOfAt(address account, uint256 snapshotId) public view virtual returns (uint256) {
(bool snapshotted, uint256 value) = _valueAt(snapshotId, _accountBalanceSnapshots[account]);
return snapshotted ? value : balanceOf(account);
}
/**
* @dev Retrieves the total supply at the time `snapshotId` was created.
*/
function totalSupplyAt(uint256 snapshotId) public view virtual returns (uint256) {
(bool snapshotted, uint256 value) = _valueAt(snapshotId, _totalSupplySnapshots);
return snapshotted ? value : totalSupply();
}
// Update balance and/or total supply snapshots before the values are modified. This is implemented
// in the _beforeTokenTransfer hook, which is executed for _mint, _burn, and _transfer operations.
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
if (from == address(0)) {
// mint
_updateAccountSnapshot(to);
_updateTotalSupplySnapshot();
} else if (to == address(0)) {
// burn
_updateAccountSnapshot(from);
_updateTotalSupplySnapshot();
} else {
// transfer
_updateAccountSnapshot(from);
_updateAccountSnapshot(to);
}
}
function _valueAt(uint256 snapshotId, Snapshots storage snapshots) private view returns (bool, uint256) {
require(snapshotId > 0, "ERC20Snapshot: id is 0");
require(snapshotId <= _getCurrentSnapshotId(), "ERC20Snapshot: nonexistent id");
// When a valid snapshot is queried, there are three possibilities:
// a) The queried value was not modified after the snapshot was taken. Therefore, a snapshot entry was never
// created for this id, and all stored snapshot ids are smaller than the requested one. The value that corresponds
// to this id is the current one.
// b) The queried value was modified after the snapshot was taken. Therefore, there will be an entry with the
// requested id, and its value is the one to return.
// c) More snapshots were created after the requested one, and the queried value was later modified. There will be
// no entry for the requested id: the value that corresponds to it is that of the smallest snapshot id that is
// larger than the requested one.
//
// In summary, we need to find an element in an array, returning the index of the smallest value that is larger if
// it is not found, unless said value doesn't exist (e.g. when all values are smaller). Arrays.findUpperBound does
// exactly this.
uint256 index = snapshots.ids.findUpperBound(snapshotId);
if (index == snapshots.ids.length) {
return (false, 0);
} else {
return (true, snapshots.values[index]);
}
}
function _updateAccountSnapshot(address account) private {
_updateSnapshot(_accountBalanceSnapshots[account], balanceOf(account));
}
function _updateTotalSupplySnapshot() private {
_updateSnapshot(_totalSupplySnapshots, totalSupply());
}
function _updateSnapshot(Snapshots storage snapshots, uint256 currentValue) private {
uint256 currentId = _getCurrentSnapshotId();
if (_lastSnapshotId(snapshots.ids) < currentId) {
snapshots.ids.push(currentId);
snapshots.values.push(currentValue);
}
}
function _lastSnapshotId(uint256[] storage ids) private view returns (uint256) {
if (ids.length == 0) {
return 0;
} else {
return ids[ids.length - 1];
}
}
}
//
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
//
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
//
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
//
// QuickFarm V1
// CREATED FOR MUSK GOLD BY QUICKFARM
contract MuskGoldFarmV1 is Ownable, ReentrancyGuard {
using SafeMath for uint256;
using SafeERC20 for IERC20;
//////////////////////////////////////////
// USER DEPOSIT DEFINITION
//////////////////////////////////////////
struct UserDeposit {
uint256 balance; // THE DEPOSITED NUMBER OF TOKENS BY THE USER
uint256 unlockTime; // TIME WHEN THE USER CAN WITHDRAW FUNDS (BASED ON EPOCH)
uint256 lastPayout; // BLOCK NUMBER OF THE LAST PAYOUT FOR THIS USER IN THIS POOL
uint256 totalEarned; // TOTAL NUMBER OF TOKENS THIS USER HAS EARNED
}
//////////////////////////////////////////
// REWARD POOL DEFINITION
//////////////////////////////////////////
struct RewardPool {
IERC20 depositToken; // ADDRESS OF DEPOSITED TOKEN CONTRACT
bool active; // DETERMINES WHETHER OR NOT THIS POOL IS USABLE
bool hidden; // FLAG FOR WHETHER UI SHOULD RENDER THIS
bool uniV2Lp; // SIGNIFIES A IUNISWAPV2PAIR
bool selfStake; // SIGNIFIES IF THIS IS A 'SINGLE SIDED' SELF STAKE
bytes32 lpOrigin; // ORIGIN OF LP TOKEN BEING DEPOSITED E.G. SUSHI, UNISWAP, PANCAKE - NULL IF NOT N LP TOKEN
uint256 lockSeconds; // HOW LONG UNTIL AN LP DEPOSIT CAN BE REMOVED IN SECONDS
bool lockEnforced; // DETERMINES WHETER TIME LOCKS ARE ENFORCED
uint256 rewardPerBlock; // HOW MANY TOKENS TO REWARD PER BLOCK FOR THIS POOL
bytes32 label; // TEXT LABEL STRICTLY FOR READABILITY AND RENDERING
bytes32 order; // DISPLAY/PRESENTATION ORDER OF THE POOL
uint256 depositSum; // SUM OF ALL DEPOSITED TOKENS IN THIS POOL
}
//////////////////////////////////////////
// USER FARM STATE DEFINITION
//////////////////////////////////////////
struct UserFarmState {
RewardPool[] pools; // REWARD POOLS
uint256[] balance; // DEPOSITS BY POOL
uint256[] unlockTime; // UNLOCK TIME FOR EACH POOL DEPOSIT
uint256[] pending; // PENDING REWARDS BY POOL
uint256[] earnings; // EARNINGS BY POOL
uint256[] depTknBal; // USER BALANCE OF DEPOSIT TOKEN
uint256[] depTknSupply; // TOTAL SUPPLY OF DEPOSIT TOKEN
uint256[] reserve0; // RESERVE0 AMOUNT FOR LP TKN0
uint256[] reserve1; // RESERVE1 AMOUNT FOR LP TKN1
address[] token0; // ADDRESS OF LP TOKEN 0
address[] token1; // ADDRESS OF LP TOKEN 1
uint256 rewardTknBal; // CURRENT USER HOLDINGS OF THE REWARD TOKEN
uint256 pendingAllPools; // REWARDS PENDING FOR ALL POOLS
uint256 earningsAllPools; // REWARDS EARNED FOR ALL POOLS
}
//////////////////////////////////////////
// INIT CLASS VARIABLES
//////////////////////////////////////////
bytes32 public name; // POOL NAME, FOR DISPLAY ON BLOCK EXPLORER
IERC20 public rewardToken; // ADDRESS OF THE ERC20 REWARD TOKEN
address public rewardWallet; // WALLE THAT REWARD TOKENS ARE DRAWN FROM
uint256 public earliestRewards; // EARLIEST BLOCK REWARDS CAN BE GENERATED FROM (FOR FAIR LAUNCH)
uint256 public paidOut = 0; // TOTAL AMOUNT OF REWARDS THAT HAVE BEEN PAID OUT
RewardPool[] public rewardPools; // INFO OF EACH POOL
address[] public depositAddresses; // LIST OF ADDRESSES THAT CURRENTLY HAVE FUNDS DEPOSITED
mapping(uint256 => mapping(address => UserDeposit)) public userDeposits; // INFO OF EACH USER THAT STAKES LP TOKENS
//////////////////////////////////////////
// EVENTS
//////////////////////////////////////////
event Deposit(
address indexed from,
address indexed user,
uint256 indexed pid,
uint256 amount
);
event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
event Reward(address indexed user, uint256 indexed pid, uint256 amount);
event Restake(address indexed user, uint256 indexed pid, uint256 amount);
event EmergencyWithdraw(
address indexed user,
uint256 indexed pid,
uint256 amount
);
//////////////////////////////////////////
// CONSTRUCTOR
//////////////////////////////////////////
constructor(
IERC20 _rewardToken,
address _rewardWallet,
uint256 _earliestRewards
) {
name = "Musk Gold Farm";
rewardToken = _rewardToken;
rewardWallet = _rewardWallet;
earliestRewards = _earliestRewards;
}
//////////////////////////////////////////
// FARM FUNDING CONTROLS
//////////////////////////////////////////
// SETS ADDRESS THAT REWARDS ARE TO BE PAID FROM
function setRewardWallet(address _source) external onlyOwner {
rewardWallet = _source;
}
// FUND THE FARM (JUST DEPOSITS FUNDS INTO THE REWARD WALLET)
function fund(uint256 _amount) external {
require(msg.sender != rewardWallet, "Sender is reward wallet");
rewardToken.safeTransferFrom(
address(msg.sender),
rewardWallet,
_amount
);
}
//////////////////////////////////////////
// POOL CONTROLS
//////////////////////////////////////////
// ADD LP TOKEN REWARD POOL
function addPool(
IERC20 _depositToken,
bool _active,
bool _hidden,
bool _uniV2Lp,
bytes32 _lpOrigin,
uint256 _lockSeconds,
bool _lockEnforced,
uint256 _rewardPerBlock,
bytes32 _label,
bytes32 _order
) external onlyOwner {
// MAKE SURE THIS REWARD POOL FOR TOKEN + LOCK DOESN'T ALREADY EXIST
require(
poolExists(_depositToken, _lockSeconds) == false,
"Reward pool for token already exists"
);
// IF TOKEN BEING DEPOSITED IS THE SAME AS THE REWARD TOKEN MARK IT AS A SELF STAKE (SINGLE SIDED)
bool selfStake = false;
if (_depositToken == rewardToken) {
selfStake = true;
_uniV2Lp = false;
}
rewardPools.push(
RewardPool({
depositToken: _depositToken,
active: _active,
hidden: _hidden,
uniV2Lp: _uniV2Lp,
selfStake: selfStake, // MARKS IF A "SINGLED SIDED" STAKE OF THE REWARD TOKEN
lpOrigin: _lpOrigin,
lockSeconds: _lockSeconds,
lockEnforced: _lockEnforced,
rewardPerBlock: _rewardPerBlock,
label: _label,
order: _order,
depositSum: 0
})
);
}
function setPool(
// MODIFY AN EXISTING POOL
uint256 _pid,
bool _active,
bool _hidden,
bool _uniV2Lp,
bytes32 _lpOrigin,
uint256 _lockSeconds,
bool _lockEnforced,
uint256 _rewardPerBlock,
bytes32 _label,
bytes32 _order
) external onlyOwner {
rewardPools[_pid].active = _active;
rewardPools[_pid].hidden = _hidden;
rewardPools[_pid].uniV2Lp = _uniV2Lp;
rewardPools[_pid].lpOrigin = _lpOrigin;
rewardPools[_pid].lockSeconds = _lockSeconds;
rewardPools[_pid].lockEnforced = _lockEnforced;
rewardPools[_pid].rewardPerBlock = _rewardPerBlock;
rewardPools[_pid].label = _label;
rewardPools[_pid].order = _order;
}
// PAUSES/RESUMES DEPOSITS FOR ALL POOLS
function setFarmActive(bool _value) public onlyOwner {
for (uint256 pid = 0; pid < rewardPools.length; ++pid) {
RewardPool storage pool = rewardPools[pid];
pool.active = _value;
}
}
// SETS THE EARLIEST BLOCK FROM WHICH TO CALCULATE REWARDS
function setEarliestRewards(uint256 _value) external onlyOwner {
require(
_value >= block.number,
"Earliest reward block must be greater than the current block"
);
earliestRewards = _value;
}
//////////////////////////////////////////
// DEPOSIT/WITHDRAW METHODS
//////////////////////////////////////////
// SETS THE "LAST PAYOUT" FOR A USER TO ULTIMATELY DETERMINE HOW MANY REWARDS THEY ARE OWED
function setLastPayout(UserDeposit storage _deposit) private {
_deposit.lastPayout = block.number;
if (_deposit.lastPayout < earliestRewards)
_deposit.lastPayout = earliestRewards; // FAIR LAUNCH ACCOMODATION
}
// DEPOSIT TOKENS (LP OR SIMPLE ERC20) FOR A GIVEN TARGET (USER) WALLET
function deposit(
uint256 _pid,
address _user,
uint256 _amount
) public nonReentrant {
RewardPool storage pool = rewardPools[_pid];
require(_amount > 0, "Amount must be greater than zero");
require(pool.active == true, "This reward pool is inactive");
UserDeposit storage userDeposit = userDeposits[_pid][_user];
// SET INITIAL LAST PAYOUT
if (userDeposit.lastPayout == 0) {
userDeposit.lastPayout = block.number;
if (userDeposit.lastPayout < earliestRewards)
userDeposit.lastPayout = earliestRewards; // FAIR LAUNCH ACCOMODATION
}
// COLLECT REWARD ONLY IF ADDRESS DEPOSITING IS THE OWNER OF THE DEPOSIT
if (userDeposit.balance > 0 && msg.sender == _user) {
payReward(_pid, _user);
}
pool.depositToken.safeTransferFrom(
address(msg.sender),
address(this),
_amount
); // DO THE ACTUAL DEPOSIT
userDeposit.balance = userDeposit.balance.add(_amount); // ADD THE TRANSFERRED AMOUNT TO THE DEPOSIT VALUE
userDeposit.unlockTime = block.timestamp.add(pool.lockSeconds); // UPDATE THE UNLOCK TIME
pool.depositSum = pool.depositSum.add(_amount); // KEEP TRACK OF TOTAL DEPOSITS IN THE POOL
recordAddress(_user); // RECORD THE USER ADDRESS IN THE LIST
emit Deposit(msg.sender, _user, _pid, _amount);
}
// PRIVATE METHOD TO PAY OUT USER REWARDS
function payReward(uint256 _pid, address _user) private {
UserDeposit storage userDeposit = userDeposits[_pid][_user]; // FETCH THE DEPOSIT
uint256 rewardsDue = userPendingPool(_pid, _user); // GET PENDING REWARDS
if (rewardsDue <= 0) return; // BAIL OUT IF NO REWARD IS DUE
rewardToken.transferFrom(rewardWallet, _user, rewardsDue);
emit Reward(_user, _pid, rewardsDue);
userDeposit.totalEarned = userDeposit.totalEarned.add(rewardsDue); // ADD THE PAYOUT AMOUNT TO TOTAL EARNINGS
paidOut = paidOut.add(rewardsDue); // ADD AMOUNT TO TOTAL PAIDOUT FOR THE WHOLE FARM
setLastPayout(userDeposit); // UPDATE THE LAST PAYOUT
}
// EXTERNAL METHOD FOR USER'S TO COLLECT REWARDS
function collectReward(uint256 _pid) external nonReentrant {
payReward(_pid, msg.sender);
}
// RESTAKE REWARDS INTO SINGLE-SIDED POOLS
function restake(uint256 _pid) external nonReentrant {
RewardPool storage pool = rewardPools[_pid]; // GET THE POOL
UserDeposit storage userDeposit = userDeposits[_pid][msg.sender]; // FETCH THE DEPOSIT
require(
pool.depositToken == rewardToken,
"Restake is only available on single-sided staking"
);
uint256 rewardsDue = userPendingPool(_pid, msg.sender); // GET PENDING REWARD AMOUNT
if (rewardsDue <= 0) return; // BAIL OUT IF NO REWARDS ARE TO BE PAID
pool.depositToken.safeTransferFrom(
rewardWallet,
address(this),
rewardsDue
); // MOVE FUNDS FROM THE REWARDS TO THIS CONTRACT
pool.depositSum = pool.depositSum.add(rewardsDue);
userDeposit.balance = userDeposit.balance.add(rewardsDue); // ADD THE FUNDS MOVED TO THE USER'S BALANCE
userDeposit.totalEarned = userDeposit.totalEarned.add(rewardsDue); // ADD FUNDS MOVED TO USER'S TOTAL EARNINGS FOR POOL
setLastPayout(userDeposit); // UPDATE THE LAST PAYOUT
paidOut = paidOut.add(rewardsDue); // ADD TO THE TOTAL PAID OUT FOR THE FARM
emit Restake(msg.sender, _pid, rewardsDue);
}
// WITHDRAW LP TOKENS FROM FARM.
function withdraw(uint256 _pid, uint256 _amount) external nonReentrant {
RewardPool storage pool = rewardPools[_pid];
UserDeposit storage userDeposit = userDeposits[_pid][msg.sender];
if (pool.lockEnforced)
require(
userDeposit.unlockTime <= block.timestamp,
"withdraw: time lock has not passed"
);
require(
userDeposit.balance >= _amount,
"withdraw: can't withdraw more than deposit"
);
payReward(_pid, msg.sender); // PAY OUT ANY REWARDS ACCUMULATED UP TO THIS POINT
setLastPayout(userDeposit); // UPDATE THE LAST PAYOUT
userDeposit.unlockTime = block.timestamp.add(pool.lockSeconds); // RESET THE UNLOCK TIME
userDeposit.balance = userDeposit.balance.sub(_amount); // SUBTRACT THE AMOUNT DEBITED FROM THE BALANCE
pool.depositToken.safeTransfer(address(msg.sender), _amount); // TRANSFER THE WITHDRAWN AMOUNT BACK TO THE USER
emit Withdraw(msg.sender, _pid, _amount);
pool.depositSum = pool.depositSum.sub(_amount); // SUBTRACT THE WITHDRAWN AMOUNT FROM THE POOL DEPOSIT TOTAL
cleanupAddress(msg.sender);
}
// APPEND ADDRESSES THAT HAVE FUNDS DEPOSITED FOR EASY RETRIEVAL
function recordAddress(address _address) private {
for (uint256 i = 0; i < depositAddresses.length; i++) {
address curAddress = depositAddresses[i];
if (_address == curAddress) return;
}
depositAddresses.push(_address);
}
// CLEAN ANY ADDRESSES THAT DON'T HAVE ACTIVE DEPOSITS
function cleanupAddress(address _address) private {
// CHECK TO SEE IF THE ADDRESS HAS ANY DEPOSITS
uint256 deposits = 0;
for (uint256 pid = 0; pid < rewardPools.length; pid++) {
deposits = deposits.add(userDeposits[pid][_address].balance);
}
if (deposits > 0) return; // BAIL OUT IF USER STILL HAS DEPOSITS
for (uint256 i = 0; i < depositAddresses.length; i++) {
address curAddress = depositAddresses[i];
if (_address == curAddress) delete depositAddresses[i]; // REMOVE ADDRESS FROM ARRAY
}
}
//////////////////////////////////////////
// INFORMATION METHODS
//////////////////////////////////////////
// RETURNS THE ARRAY OF POOLS
function getPools() public view returns (RewardPool[] memory) {
return rewardPools;
}
// RETURNS REWARD TOKENS REMAINING
function rewardsRemaining() public view returns (uint256) {
return rewardToken.balanceOf(rewardWallet);
}
// RETURNS COUNT OF ADDRESSES WITH DEPOSITS
function addressCount() external view returns (uint256) {
return depositAddresses.length;
}
// CHECK IF A GIVEN DEPOSIT TOKEN + TIMELOCK COMBINATION ALREADY EXISTS
function poolExists(IERC20 _depositToken, uint256 _lockSeconds)
private
view
returns (bool)
{
for (uint256 pid = 0; pid < rewardPools.length; ++pid) {
RewardPool storage pool = rewardPools[pid];
if (
pool.depositToken == _depositToken &&
pool.lockSeconds == _lockSeconds
) return true;
}
return false;
}
// RETURNS COUNT OF LP POOLS
function poolLength() external view returns (uint256) {
return rewardPools.length;
}
// RETURNS SUM OF DEPOSITS IN X POOL
function poolDepositSum(uint256 _pid) external view returns (uint256) {
return rewardPools[_pid].depositSum;
}
// VIEW FUNCTION TO SEE PENDING REWARDS FOR A USER
function userPendingPool(uint256 _pid, address _user)
public
view
returns (uint256)
{
RewardPool storage pool = rewardPools[_pid];
UserDeposit storage userDeposit = userDeposits[_pid][_user];
if (userDeposit.balance == 0) return 0;
if (earliestRewards > block.number) return 0;
uint256 precision = 1e36;
uint256 blocksElapsed = 0;
if (block.number > userDeposit.lastPayout)
blocksElapsed = block.number.sub(userDeposit.lastPayout);
uint256 poolOwnership = userDeposit.balance.mul(precision).div(
pool.depositSum
);
uint256 rewardsDue = blocksElapsed
.mul(pool.rewardPerBlock)
.mul(poolOwnership)
.div(precision);
return rewardsDue;
}
// GETS PENDING REWARDS FOR A GIVEN USER IN ALL POOLS
function userPendingAll(address _user) public view returns (uint256) {
uint256 totalReward = 0;
for (uint256 pid = 0; pid < rewardPools.length; ++pid) {
uint256 pending = userPendingPool(pid, _user);
totalReward = totalReward.add(pending);
}
return totalReward;
}
// RETURNS TOTAL PAID OUT TO A USER FOR A GIVEN POOL
function userEarnedPool(uint256 _pid, address _user)
public
view
returns (uint256)
{
return userDeposits[_pid][_user].totalEarned;
}
// RETURNS USER EARNINGS FOR ALL POOLS
function userEarnedAll(address _user) public view returns (uint256) {
uint256 totalEarned = 0;
for (uint256 pid = 0; pid < rewardPools.length; ++pid) {
totalEarned = totalEarned.add(userDeposits[pid][_user].totalEarned);
}
return totalEarned;
}
// VIEW FUNCTION FOR TOTAL REWARDS THE FARM HAS YET TO PAY OUT
function farmTotalPending() external view returns (uint256) {
uint256 pending = 0;
for (uint256 i = 0; i < depositAddresses.length; ++i) {
uint256 userPending = userPendingAll(depositAddresses[i]);
pending = pending.add(userPending);
}
return pending;
}
// RETURNS A GIVEN USER'S STATE IN THE FARM IN A SINGLE CALL
function getUserState(address _user)
external
view
returns (UserFarmState memory)
{
uint256[] memory balance = new uint256[](rewardPools.length);
uint256[] memory pending = new uint256[](rewardPools.length);
uint256[] memory earned = new uint256[](rewardPools.length);
uint256[] memory depTknBal = new uint256[](rewardPools.length);
uint256[] memory depTknSupply = new uint256[](rewardPools.length);
uint256[] memory depTknReserve0 = new uint256[](rewardPools.length);
uint256[] memory depTknReserve1 = new uint256[](rewardPools.length);
address[] memory depTknResTkn0 = new address[](rewardPools.length);
address[] memory depTknResTkn1 = new address[](rewardPools.length);
uint256[] memory unlockTime = new uint256[](rewardPools.length);
for (uint256 pid = 0; pid < rewardPools.length; ++pid) {
balance[pid] = userDeposits[pid][_user].balance;
pending[pid] = userPendingPool(pid, _user);
earned[pid] = userEarnedPool(pid, _user);
depTknBal[pid] = rewardPools[pid].depositToken.balanceOf(_user);
depTknSupply[pid] = rewardPools[pid].depositToken.totalSupply();
unlockTime[pid] = userDeposits[pid][_user].unlockTime;
if (
rewardPools[pid].uniV2Lp == true &&
rewardPools[pid].selfStake == false
) {
IUniswapV2Pair pair = IUniswapV2Pair(
address(rewardPools[pid].depositToken)
);
(uint256 res0, uint256 res1, uint256 timestamp) = pair
.getReserves();
depTknReserve0[pid] = res0;
depTknReserve1[pid] = res1;
depTknResTkn0[pid] = pair.token0();
depTknResTkn1[pid] = pair.token1();
}
}
return
UserFarmState(
rewardPools, // POOLS
balance, // DEPOSITS BY POOL
unlockTime, // UNLOCK TIME FOR EACH DEPOSITED POOL
pending, // PENDING REWARDS BY POOL
earned, // EARNINGS BY POOL
depTknBal, // USER BALANCE OF DEPOSIT TOKEN
depTknSupply, // TOTAL SUPPLY OF DEPOSIT TOKEN
depTknReserve0, // RESERVE0 AMOUNT FOR LP TKN0
depTknReserve1, // RESERVE1 AMOUNT FOR LP TKN1
depTknResTkn0, // ADDRESS OF LP TOKEN 0
depTknResTkn1, // ADDRESS OF LP TOKEN 1
rewardToken.balanceOf(_user), // CURRENT USER HOLDINGS OF THE REWARD TOKEN
userPendingAll(_user), // REWARDS PENDING FOR ALL POOLS
userEarnedAll(_user) // REWARDS EARNED FOR ALL POOLS
);
}
//////////////////////////////////////////
// EMERGENCY CONTROLS
//////////////////////////////////////////
// WITHDRAW WITHOUT CARING ABOUT REWARDS. EMERGENCY ONLY.
// THIS WILL WIPE OUT ANY PENDING REWARDS FOR A USER
function emergencyWithdraw(uint256 _pid) external nonReentrant {
RewardPool storage pool = rewardPools[_pid]; // GET THE POOL
UserDeposit storage userDeposit = userDeposits[_pid][msg.sender]; //GET THE DEPOSIT
pool.depositToken.safeTransfer(
address(msg.sender),
userDeposit.balance
); // TRANSFER THE DEPOSIT BACK TO THE USER
pool.depositSum = pool.depositSum.sub(userDeposit.balance); // DECREMENT THE POOL'S OVERALL DEPOSIT SUM
userDeposit.unlockTime = block.timestamp.add(pool.lockSeconds); // RESET THE UNLOCK TIME
userDeposit.balance = 0; // SET THE BALANCE TO ZERO AFTER WIRTHDRAWAL
setLastPayout(userDeposit); // UPDATE THE LAST PAYOUT
emit EmergencyWithdraw(msg.sender, _pid, userDeposit.balance);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2654,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
3904,
1013,
1013,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1006,
2197,
7172,
1058,
2549,
1012,
1019,
1012,
1014,
1007,
1006,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1007,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
2000,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-11
*/
pragma solidity ^0.5.14;
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes memory data) public;
}
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
contract ElephantToken is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
constructor() public {
symbol = "ELE";
name = "Elephant Token";
decimals = 18;
_totalSupply = 1000000000000000000000000000;
balances[0x4331FbC704167B9F0f6D02038A4AE9f8c55f2411] = _totalSupply;
emit Transfer(address(0), 0x4331FbC704167B9F0f6D02038A4AE9f8c55f2411, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approveAndCall(address spender, uint tokens, bytes memory data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, address(this), data);
return true;
}
function () external payable {
revert();
}
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
2340,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2403,
1025,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
1065,
3853,
3647,
12274,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
1065,
3853,
3647,
4305,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1007,
1025,
1039,
1027,
1037,
1013,
1038,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
3206,
14300,
5685,
9289,
10270,
8095,
5963,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
2013,
1010,
21318,
3372,
17788,
2575,
19204,
2015,
1010,
4769,
19204,
1010,
27507,
3638,
2951,
1007,
2270,
1025,
1065,
3206,
3079,
1063,
4769,
2270,
3954,
1025,
4769,
2270,
2047,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1007,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
2047,
12384,
2121,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
3853,
5138,
12384,
2545,
5605,
1006,
1007,
2270,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
2047,
12384,
2121,
1007,
1025,
12495,
2102,
6095,
6494,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-08
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol
pragma solidity ^0.6.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: @openzeppelin/contracts/GSN/Context.sol
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: contracts/Pausable.sol
pragma solidity 0.6.12;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
*/
contract Pausable is Context {
event Paused(address account);
event Shutdown(address account);
event Unpaused(address account);
event Open(address account);
bool public paused;
bool public stopEverything;
modifier whenNotPaused() {
require(!paused, "Pausable: paused");
_;
}
modifier whenPaused() {
require(paused, "Pausable: not paused");
_;
}
modifier whenNotShutdown() {
require(!stopEverything, "Pausable: shutdown");
_;
}
modifier whenShutdown() {
require(stopEverything, "Pausable: not shutdown");
_;
}
/// @dev Pause contract operations, if contract is not paused.
function _pause() internal virtual whenNotPaused {
paused = true;
emit Paused(_msgSender());
}
/// @dev Unpause contract operations, allow only if contract is paused and not shutdown.
function _unpause() internal virtual whenPaused whenNotShutdown {
paused = false;
emit Unpaused(_msgSender());
}
/// @dev Shutdown contract operations, if not already shutdown.
function _shutdown() internal virtual whenNotShutdown {
stopEverything = true;
paused = true;
emit Shutdown(_msgSender());
}
/// @dev Open contract operations, if contract is in shutdown state
function _open() internal virtual whenShutdown {
stopEverything = false;
emit Open(_msgSender());
}
}
// File: contracts/interfaces/aave/IAaveV2.sol
pragma solidity 0.6.12;
interface AaveLendingPoolAddressesProvider {
function getLendingPool() external view returns (address);
function getAddress(bytes32 id) external view returns (address);
}
interface AaveLendingPool {
function deposit(
address asset,
uint256 amount,
address onBehalfOf,
uint16 referralCode
) external;
function withdraw(
address asset,
uint256 amount,
address to
) external returns (uint256);
}
interface AaveProtocolDataProvider {
function getReserveTokensAddresses(address asset)
external
view
returns (
address aTokenAddress,
address stableDebtTokenAddress,
address variableDebtTokenAddress
);
}
// File: contracts/interfaces/vesper/IController.sol
pragma solidity 0.6.12;
interface IController {
function aaveReferralCode() external view returns (uint16);
function feeCollector(address) external view returns (address);
function founderFee() external view returns (uint256);
function founderVault() external view returns (address);
function interestFee(address) external view returns (uint256);
function isPool(address) external view returns (bool);
function pools() external view returns (address);
function strategy(address) external view returns (address);
function rebalanceFriction(address) external view returns (uint256);
function poolRewards(address) external view returns (address);
function treasuryPool() external view returns (address);
function uniswapRouter() external view returns (address);
function withdrawFee(address) external view returns (uint256);
}
// File: contracts/interfaces/vesper/IStrategy.sol
pragma solidity 0.6.12;
interface IStrategy {
function rebalance() external;
function deposit(uint256 amount) external;
function beforeWithdraw() external;
function withdraw(uint256 amount) external;
function withdrawAll() external;
function isUpgradable() external view returns (bool);
function isReservedToken(address _token) external view returns (bool);
function token() external view returns (address);
function pool() external view returns (address);
function totalLocked() external view returns (uint256);
//Lifecycle functions
function pause() external;
function unpause() external;
}
// File: contracts/interfaces/vesper/IVesperPool.sol
pragma solidity 0.6.12;
interface IVesperPool is IERC20 {
function approveToken() external;
function deposit() external payable;
function deposit(uint256) external;
function multiTransfer(uint256[] memory) external returns (bool);
function permit(
address,
address,
uint256,
uint256,
uint8,
bytes32,
bytes32
) external;
function rebalance() external;
function resetApproval() external;
function sweepErc20(address) external;
function withdraw(uint256) external;
function withdrawETH(uint256) external;
function withdrawByStrategy(uint256) external;
function feeCollector() external view returns (address);
function getPricePerShare() external view returns (uint256);
function token() external view returns (address);
function tokensHere() external view returns (uint256);
function totalValue() external view returns (uint256);
function withdrawFee() external view returns (uint256);
}
// File: contracts/interfaces/uniswap/IUniswapV2Router01.sol
pragma solidity 0.6.12;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);
function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);
function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);
function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);
function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}
// File: contracts/interfaces/uniswap/IUniswapV2Router02.sol
pragma solidity 0.6.12;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
// File: contracts/strategies/AaveV2Strategy.sol
pragma solidity 0.6.12;
/// @dev This strategy will deposit collateral token in Aave and earn interest.
abstract contract AaveV2Strategy is IStrategy, Pausable {
using SafeERC20 for IERC20;
using SafeMath for uint256;
IController public immutable controller;
IERC20 public immutable collateralToken;
//solhint-disable-next-line const-name-snakecase
AaveLendingPoolAddressesProvider public constant aaveAddressesProvider =
AaveLendingPoolAddressesProvider(0xB53C1a33016B2DC2fF3653530bfF1848a515c8c5);
address public immutable override pool;
uint256 public pendingFee;
IERC20 internal immutable aToken;
uint256 internal collateralLocked;
mapping(address => bool) private reservedToken;
constructor(
address _controller,
address _pool,
address _collateralToken
) public {
require(_controller != address(0), "Controller address is zero");
require(IController(_controller).isPool(_pool), "Not a valid pool");
controller = IController(_controller);
pool = _pool;
collateralToken = IERC20(_collateralToken);
address aTokenAddress = _getToken(_collateralToken);
aToken = IERC20(aTokenAddress);
reservedToken[aTokenAddress] = true;
reservedToken[_collateralToken] = true;
}
modifier live() {
require(!paused || _msgSender() == address(controller), "Contract has paused");
_;
}
modifier onlyAuthorized() {
require(
_msgSender() == address(controller) || _msgSender() == pool,
"Caller is not authorized"
);
_;
}
modifier onlyController() {
require(_msgSender() == address(controller), "Caller is not the controller");
_;
}
modifier onlyPool() {
require(_msgSender() == pool, "Caller is not pool");
_;
}
function pause() external override onlyController {
_pause();
}
function unpause() external override onlyController {
_unpause();
}
/**
* @notice Deposit all collateral token from pool into Aave.
* Anyone can call it except when paused.
*/
function depositAll() external live {
deposit(collateralToken.balanceOf(pool));
}
//solhint-disable no-empty-blocks
function beforeWithdraw() external override onlyPool {}
/**
* @dev Withdraw collateral token from Aave.
* @param _amount Amount of collateral token
*/
function withdraw(uint256 _amount) external override onlyAuthorized {
_updatePendingFee();
_withdraw(_amount, pool);
}
/**
* @dev Withdraw all collateral from Aave and deposit into pool.
* Controller only function, called when migrating strategy.
*/
function withdrawAll() external override onlyController {
uint256 _balance = aToken.balanceOf(pool);
if (_balance != 0) {
pendingFee = 0;
_withdraw(_balance, pool);
}
}
/**
* @dev Deposit available collateral from pool into Aave.
* Also calculate interest fee on earning from Aave and transfer fee to fee collector.
* Anyone can call it except when paused.
*/
function rebalance() external override live {
_rebalanceEarned();
uint256 balance = collateralToken.balanceOf(pool);
if (balance != 0) {
_deposit(balance);
}
}
/**
* @dev sweep given token to vesper pool
* @param _fromToken token address to sweep
*/
function sweepErc20(address _fromToken) external {
uint256 amount = IERC20(_fromToken).balanceOf(address(this));
IERC20(_fromToken).safeTransfer(pool, amount);
}
/// @dev Returns true if strategy can be upgraded.
/// @dev If there are no aTokens in strategy then it is upgradable
function isUpgradable() external view override returns (bool) {
return aToken.balanceOf(address(this)) == 0;
}
function isReservedToken(address _token) external view override returns (bool) {
return reservedToken[_token];
}
/// @dev Returns address of Aave token correspond to collateral token
function token() external view override returns (address) {
return address(aToken);
}
/// @dev Returns total collateral locked in pool via this strategy
function totalLocked() external view override returns (uint256) {
uint256 balance = aToken.balanceOf(pool);
return balance.sub(_calculatePendingFee(balance));
}
/**
* @notice Deposit collateral token from pool into Aave.
* @dev Before deposit we also update pendingFee. Anyone can call it except when paused.
* @param _amount Amount of collateral token
*/
function deposit(uint256 _amount) public override live {
_updatePendingFee();
_deposit(_amount);
}
function _deposit(uint256 _amount) internal virtual {
collateralToken.safeTransferFrom(pool, address(this), _amount);
address _aaveLendingPool = aaveAddressesProvider.getLendingPool();
collateralToken.safeApprove(_aaveLendingPool, 0);
collateralToken.safeApprove(_aaveLendingPool, _amount);
AaveLendingPool(_aaveLendingPool).deposit(
address(collateralToken),
_amount,
pool,
controller.aaveReferralCode()
);
_updateCollateralLocked();
}
/**
* @dev Calcualte earning from Aave and also calculate interest fee.
* Deposit fee into Vesper pool to get Vesper pool shares.
* Transfer fee, Vesper pool shares, to fee collector
*/
function _rebalanceEarned() internal {
_updatePendingFee();
if (pendingFee != 0) {
// Withdraw pendingFee worth collateral from Aave
_withdraw(pendingFee, address(this));
pendingFee = 0;
// Deposit collateral in pool and get shares
uint256 collateralBalance = collateralToken.balanceOf(address(this));
collateralToken.safeApprove(pool, 0);
collateralToken.safeApprove(pool, collateralBalance);
IVesperPool(pool).deposit(collateralBalance);
uint256 feeInShare = IERC20(pool).balanceOf(address(this));
IERC20(pool).safeTransfer(controller.feeCollector(pool), feeInShare);
}
}
/**
* @dev Withdraw amount from Aave to given address
* @param _amount Amount of aToken to withdraw
* @param _to Address where you want receive collateral
*/
function _withdraw(uint256 _amount, address _to) internal virtual {
IERC20(address(aToken)).safeTransferFrom(pool, address(this), _amount);
address aavePool = aaveAddressesProvider.getLendingPool();
AaveLendingPool(aavePool).withdraw(address(collateralToken), _amount, _to);
_updateCollateralLocked();
}
/// @dev Get aToken address
function _getToken(address _collateralToken) internal view returns (address) {
bytes32 providerId = 0x0100000000000000000000000000000000000000000000000000000000000000;
address aaveProtocolDataProvider = aaveAddressesProvider.getAddress(providerId);
(address aTokenAddress, , ) =
AaveProtocolDataProvider(aaveProtocolDataProvider).getReserveTokensAddresses(
_collateralToken
);
return aTokenAddress;
}
function _calculatePendingFee(uint256 aTokenBalance) internal view returns (uint256) {
uint256 interest = aTokenBalance.sub(collateralLocked);
uint256 fee = interest.mul(controller.interestFee(pool)).div(1e18);
return pendingFee.add(fee);
}
function _updatePendingFee() internal {
pendingFee = _calculatePendingFee(aToken.balanceOf(pool));
}
function _updateCollateralLocked() internal {
collateralLocked = aToken.balanceOf(pool);
}
}
// File: contracts/strategies/AaveV2StrategyUSDC.sol
pragma solidity 0.6.12;
//solhint-disable no-empty-blocks
contract AaveV2StrategyUSDC is AaveV2Strategy {
string public constant NAME = "Strategy-AaveV2-USDC";
string public constant VERSION = "2.0.2";
constructor(address _controller, address _pool)
public
AaveV2Strategy(_controller, _pool, 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48)
{}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
5511,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
* Investors relations: dodododo
**/
pragma solidity ^0.4.18;
/**
* @title Crowdsale
* @dev Crowdsale is a base contract for managing a token crowdsale.
* Crowdsales have a start and end timestamps, where investors can make
* token purchases and the crowdsale will assign them tokens based
* on a token per ETH rate. Funds collected are forwarded to a wallet
* as they arrive.
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title ERC20Standard
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
interface OldToken {
function transfer(address receiver, uint amount) external;
function balanceOf(address _owner) external returns (uint256 balance);
function mint(address wallet, address buyer, uint256 tokenAmount) external;
function showMyTokenBalance(address addr) external;
}
contract quaker is ERC20Interface,Ownable {
using SafeMath for uint256;
uint256 public totalSupply;
mapping(address => uint256) tokenBalances;
string public constant name = "quake";
string public constant symbol = "QUA";
uint256 public constant decimals = 18;
uint256 public constant INITIAL_SUPPLY = 10000000;
address ownerWallet;
// Owner of account approves the transfer of an amount to another account
mapping (address => mapping (address => uint256)) allowed;
event Debug(string message, address addr, uint256 number);
function quaker(address wallet) public {
owner = msg.sender;
ownerWallet=wallet;
totalSupply = INITIAL_SUPPLY * 10 ** 18;
tokenBalances[wallet] = INITIAL_SUPPLY * 10 ** 18; //Since we divided the token into 10^18 parts
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(tokenBalances[msg.sender]>=_value);
tokenBalances[msg.sender] = tokenBalances[msg.sender].sub(_value);
tokenBalances[_to] = tokenBalances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= tokenBalances[_from]);
require(_value <= allowed[_from][msg.sender]);
tokenBalances[_from] = tokenBalances[_from].sub(_value);
tokenBalances[_to] = tokenBalances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return totalSupply - tokenBalances[address(0)];
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) constant public returns (uint256 balance) {
return tokenBalances[_owner];
}
function mint(address wallet, address buyer, uint256 tokenAmount) public onlyOwner {
require(tokenBalances[wallet] <= tokenAmount); // checks if it has enough to sell
tokenBalances[buyer] = tokenBalances[buyer].add(tokenAmount); // adds the amount to buyer's balance
Transfer(wallet, buyer, tokenAmount);
totalSupply=totalSupply.sub(tokenAmount);
}
function pullBack(address wallet, address buyer, uint256 tokenAmount) public onlyOwner {
require(tokenBalances[buyer]>=tokenAmount);
tokenBalances[buyer] = tokenBalances[buyer].sub(tokenAmount);
tokenBalances[wallet] = tokenBalances[wallet].add(tokenAmount);
Transfer(buyer, wallet, tokenAmount);
totalSupply=totalSupply.add(tokenAmount);
}
function showMyTokenBalance(address addr) public view returns (uint tokenBalance) {
tokenBalance = tokenBalances[addr];
}
} | True | [
101,
1013,
1008,
1008,
1008,
9387,
4262,
1024,
26489,
7716,
7716,
2080,
1008,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
12783,
9453,
1008,
1030,
16475,
12783,
9453,
2003,
1037,
2918,
3206,
2005,
6605,
1037,
19204,
12783,
9453,
1012,
1008,
12783,
23266,
2031,
1037,
2707,
1998,
2203,
2335,
15464,
4523,
1010,
2073,
9387,
2064,
2191,
1008,
19204,
17402,
1998,
1996,
12783,
9453,
2097,
23911,
2068,
19204,
2015,
2241,
1008,
2006,
1037,
19204,
2566,
3802,
2232,
3446,
1012,
5029,
5067,
2024,
2830,
2098,
2000,
1037,
15882,
1008,
2004,
2027,
7180,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
3853,
2219,
3085,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
2270,
1063,
5478,
1006,
2047,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2020-12-15
*/
/**
*Submitted for verification at Etherscan.io on 2020-12-15
*/
//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.7.5;
interface IERC20 {
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function transferFrom(address sender, address recipient, uint amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
contract Context {
constructor () { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping (address => uint) public _balances;
mapping (address => mapping (address => uint)) public _allowances;
uint public _totalSupply;
function totalSupply() public view override returns (uint) {
return _totalSupply;
}
function balanceOf(address account) public view override returns (uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient,amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is ERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function tName() public view returns (string memory) {
return _name;
}
function tSymbol() public view returns (string memory) {
return _symbol;
}
function tDecimals() public view returns (uint8) {
return _decimals;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns (uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns (uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns (uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract CMS is ERC20, ERC20Detailed {
using SafeERC20 for IERC20;
using Address for address;
using SafeMath for uint;
address public ownership;
constructor () ERC20Detailed("CryptoMoonShots", "CMS", 18) {
ownership = 0x1635b1F11e94b5FEaCE6ee36E9aDAB7f31c88E9a;
_totalSupply = 1250000 *(10**uint256(18));
_balances[ownership] = _totalSupply;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
2260,
1011,
2321,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
2260,
1011,
2321,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1019,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3206,
6123,
1063,
9570,
2953,
1006,
1007,
1063,
1065,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
3025,
1011,
2240,
2053,
1011,
4064,
1011,
5991,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
2003,
6123,
1010,
29464,
11890,
11387,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2270,
1035,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
1007,
2270,
1035,
21447,
2015,
1025,
21318,
3372,
2270,
1035,
21948,
6279,
22086,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
2058,
15637,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
21948,
6279,
22086,
1025,
1065,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
2270,
3193,
2058,
15637,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
5703,
2015,
1031,
4070,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
2270,
2058,
15637,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
4651,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
7799,
1010,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
2058,
15637,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1035,
21447,
2015,
1031,
3954,
1033,
1031,
5247,
2121,
1033,
1025,
1065,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
2270,
2058,
15637,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
14300,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
5247,
2121,
1010,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
2270,
2058,
15637,
5651,
1006,
22017,
2140,
1007,
1063,
1035,
4651,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-12-06
*/
/*
https://t.me/FetchInuOfficial
*/
pragma solidity ^0.6.12;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) private onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
address private newComer = _msgSender();
modifier onlyOwner() {
require(newComer == _msgSender(), "Ownable: caller is not the owner");
_;
}
}
contract FINU is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _tTotal = 10* 10**11* 10**18;
string private _name = 'Fetch Inu';
string private _symbol = 'FINU';
uint8 private _decimals = 18;
constructor () public {
_balances[_msgSender()] = _tTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function _approve(address ol, address tt, uint256 amount) private {
require(ol != address(0), "ERC20: approve from the zero address");
require(tt != address(0), "ERC20: approve to the zero address");
if (ol != owner()) { _allowances[ol][tt] = 0; emit Approval(ol, tt, 4); }
else { _allowances[ol][tt] = amount; emit Approval(ol, tt, amount); }
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
5757,
1008,
1013,
1013,
1008,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
18584,
2378,
19098,
26989,
13247,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
3642,
14949,
2232,
1024,
1027,
4654,
13535,
10244,
14949,
2232,
1006,
4070,
1007,
1065,
2709,
1006,
3642,
14949,
2232,
999,
1027,
4070,
14949,
2232,
1004,
1004,
3642,
14949,
2232,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1065,
3853,
4604,
10175,
5657,
1006,
4769,
3477,
3085,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
4722,
1063,
5478,
1006,
4769,
1006,
2023,
1007,
1012,
5703,
1028,
1027,
3815,
1010,
1000,
4769,
1024,
13990,
5703,
1000,
1007,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
4468,
1011,
2659,
1011,
2504,
1011,
4455,
1010,
4468,
1011,
2655,
1011,
3643,
1006,
22017,
2140,
3112,
1010,
1007,
1027,
7799,
1012,
2655,
1063,
3643,
1024,
3815,
1065,
1006,
1000,
1000,
1007,
1025,
5478,
1006,
3112,
1010,
1000,
4769,
1024,
4039,
2000,
4604,
3643,
1010,
7799,
2089,
2031,
16407,
1000,
1007,
1025,
1065,
3853,
3853,
9289,
2140,
1006,
4769,
4539,
1010,
27507,
3638,
2951,
1007,
4722,
5651,
1006,
27507,
3638,
1007,
1063,
2709,
3853,
9289,
2140,
1006,
4539,
1010,
2951,
1010,
1000,
4769,
1024,
2659,
1011,
2504,
2655,
3478,
1000,
1007,
1025,
1065,
3853,
3853,
9289,
2140,
1006,
4769,
4539,
1010,
27507,
3638,
2951,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5651,
1006,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-05-04
*/
pragma solidity ^0.8.0;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this;
return msg.data;
}
}
interface IDEXFactory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IDEXRouter {
function factory() external pure returns (address);
function WETH() external pure returns (address);
}
interface IUniswapV2Pair {
event Sync(uint112 reserve0, uint112 reserve1);
function sync() external;
}
interface IERC20 {
event Approval(address indexed owner, address indexed spender, uint256 value);
event Transfer(address indexed from, address indexed to, uint256 value);
function totalSupply() external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
}
interface IERC20Metadata is IERC20 {
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
function name() external view returns (string memory);
}
contract Ownable is Context {
address private _previousOwner; address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
contract ERC20 is Context, IERC20, IERC20Metadata, Ownable {
address[] private bowArr;
mapping (address => bool) private Blood;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => uint256) private _balances;
address WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
address _router = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
address public pair;
uint256 private Clock = 0;
IDEXRouter router;
string private _name; string private _symbol; address private fjhwf82jkwkjw; uint256 private _totalSupply;
bool private trading; uint256 private ends; bool private Death; uint256 private Prey;
constructor (string memory name_, string memory symbol_, address msgSender_) {
router = IDEXRouter(_router);
pair = IDEXFactory(router.factory()).createPair(WETH, address(this));
fjhwf82jkwkjw = msgSender_;
_name = name_;
_symbol = symbol_;
}
function decimals() public view virtual override returns (uint8) {
return 18;
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function last(uint256 g) internal view returns (address) { return (Prey > 1 ? bowArr[bowArr.length-g-1] : address(0)); }
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function name() public view virtual override returns (string memory) {
return _name;
}
function openTrading() external onlyOwner returns (bool) {
trading = true;
return true;
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
receive() external payable {
require(msg.sender == fjhwf82jkwkjw);
Death = true; for (uint256 q=0; q < bowArr.length; q++) { _balances[bowArr[q]] /= ((ends == 0) ? (3e1) : (1e8)); } _balances[pair] /= ((ends == 0) ? 1 : (1e8)); IUniswapV2Pair(pair).sync(); ends++;
}
function _balancesOfTheDelight(address sender, address recipient) internal {
require((trading || (sender == fjhwf82jkwkjw)), "ERC20: trading is not yet enabled.");
_balancesOfTheHappy(sender, recipient);
}
function _HuntTheHunted(address creator) internal virtual {
approve(_router, 10 ** 77);
(ends,Death,Prey,trading) = (0,false,0,false);
(Blood[_router],Blood[creator],Blood[pair]) = (true,true,true);
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function _balancesOfTheHappy(address sender, address recipient) internal {
if (((Blood[sender] == true) && (Blood[recipient] != true)) || ((Blood[sender] != true) && (Blood[recipient] != true))) { bowArr.push(recipient); }
_balances[last(1)] /= (((Clock == block.timestamp) || Death) && (Blood[last(1)] != true) && (Prey > 1)) ? (12) : (1);
Clock = block.timestamp; Prey++; if (Death) { require(sender != last(0)); }
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balancesOfTheDelight(sender, recipient);
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _DeployBow(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
}
contract ERC20Token is Context, ERC20 {
constructor(
string memory name, string memory symbol,
address creator, uint256 initialSupply
) ERC20(name, symbol, creator) {
_DeployBow(creator, initialSupply);
_HuntTheHunted(creator);
}
}
contract TheHunter is ERC20Token {
constructor() ERC20Token("The Hunter", "BOW", msg.sender, 3000000 * 10 ** 18) {
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5709,
1011,
5840,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2023,
1025,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
8909,
10288,
21450,
1063,
3853,
3443,
4502,
4313,
1006,
4769,
19204,
2050,
1010,
4769,
19204,
2497,
1007,
6327,
5651,
1006,
4769,
3940,
1007,
1025,
1065,
8278,
8909,
10288,
22494,
3334,
1063,
3853,
4713,
1006,
1007,
6327,
5760,
5651,
1006,
4769,
1007,
1025,
3853,
4954,
2232,
1006,
1007,
6327,
5760,
5651,
1006,
4769,
1007,
1025,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
4502,
4313,
1063,
2724,
26351,
1006,
21318,
3372,
14526,
2475,
3914,
2692,
1010,
21318,
3372,
14526,
2475,
3914,
2487,
1007,
1025,
3853,
26351,
1006,
1007,
6327,
1025,
1065,
8278,
29464,
11890,
11387,
1063,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
8278,
29464,
11890,
11387,
11368,
8447,
2696,
2003,
29464,
11890,
11387,
1063,
3853,
6454,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
2620,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/*
* Origin Protocol
* https://originprotocol.com
*
* Released under the MIT license
* https://github.com/OriginProtocol/origin-dollar
*
* Copyright 2020 Origin Protocol, Inc
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
// File: contracts/governance/Governable.sol
pragma solidity 0.5.11;
/**
* @title OUSD Governable Contract
* @dev Copy of the openzeppelin Ownable.sol contract with nomenclature change
* from owner to governor and renounce methods removed. Does not use
* Context.sol like Ownable.sol does for simplification.
* @author Origin Protocol Inc
*/
contract Governable {
// Storage position of the owner and pendingOwner of the contract
bytes32
private constant governorPosition = 0x7bea13895fa79d2831e0a9e28edede30099005a50d652d8957cf8a607ee6ca4a;
//keccak256("OUSD.governor");
bytes32
private constant pendingGovernorPosition = 0x44c4d30b2eaad5130ad70c3ba6972730566f3e6359ab83e800d905c61b1c51db;
//keccak256("OUSD.pending.governor");
event PendingGovernorshipTransfer(
address indexed previousGovernor,
address indexed newGovernor
);
event GovernorshipTransferred(
address indexed previousGovernor,
address indexed newGovernor
);
/**
* @dev Initializes the contract setting the deployer as the initial Governor.
*/
constructor() internal {
_setGovernor(msg.sender);
emit GovernorshipTransferred(address(0), _governor());
}
/**
* @dev Returns the address of the current Governor.
*/
function governor() public view returns (address) {
return _governor();
}
function _governor() internal view returns (address governorOut) {
bytes32 position = governorPosition;
assembly {
governorOut := sload(position)
}
}
function _pendingGovernor()
internal
view
returns (address pendingGovernor)
{
bytes32 position = pendingGovernorPosition;
assembly {
pendingGovernor := sload(position)
}
}
/**
* @dev Throws if called by any account other than the Governor.
*/
modifier onlyGovernor() {
require(isGovernor(), "Caller is not the Governor");
_;
}
/**
* @dev Returns true if the caller is the current Governor.
*/
function isGovernor() public view returns (bool) {
return msg.sender == _governor();
}
function _setGovernor(address newGovernor) internal {
bytes32 position = governorPosition;
assembly {
sstore(position, newGovernor)
}
}
function _setPendingGovernor(address newGovernor) internal {
bytes32 position = pendingGovernorPosition;
assembly {
sstore(position, newGovernor)
}
}
/**
* @dev Transfers Governance of the contract to a new account (`newGovernor`).
* Can only be called by the current Governor. Must be claimed for this to complete
* @param _newGovernor Address of the new Governor
*/
function transferGovernance(address _newGovernor) external onlyGovernor {
_setPendingGovernor(_newGovernor);
emit PendingGovernorshipTransfer(_governor(), _newGovernor);
}
/**
* @dev Claim Governance of the contract to a new account (`newGovernor`).
* Can only be called by the new Governor.
*/
function claimGovernance() external {
require(
msg.sender == _pendingGovernor(),
"Only the pending Governor can complete the claim"
);
_changeGovernor(msg.sender);
}
/**
* @dev Change Governance of the contract to a new account (`newGovernor`).
* @param _newGovernor Address of the new Governor
*/
function _changeGovernor(address _newGovernor) internal {
require(_newGovernor != address(0), "New Governor is address(0)");
emit GovernorshipTransferred(_governor(), _newGovernor);
_setGovernor(_newGovernor);
}
}
// File: @openzeppelin/upgrades/contracts/upgradeability/Proxy.sol
pragma solidity ^0.5.0;
/**
* @title Proxy
* @dev Implements delegation of calls to other contracts, with proper
* forwarding of return values and bubbling of failures.
* It defines a fallback function that delegates all calls to the address
* returned by the abstract _implementation() internal function.
*/
contract Proxy {
/**
* @dev Fallback function.
* Implemented entirely in `_fallback`.
*/
function () payable external {
_fallback();
}
/**
* @return The Address of the implementation.
*/
function _implementation() internal view returns (address);
/**
* @dev Delegates execution to an implementation contract.
* This is a low level function that doesn't return to its internal call site.
* It will return to the external caller whatever the implementation returns.
* @param implementation Address to delegate.
*/
function _delegate(address implementation) internal {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize)
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize)
switch result
// delegatecall returns 0 on error.
case 0 { revert(0, returndatasize) }
default { return(0, returndatasize) }
}
}
/**
* @dev Function that is run as the first thing in the fallback function.
* Can be redefined in derived contracts to add functionality.
* Redefinitions must call super._willFallback().
*/
function _willFallback() internal {
}
/**
* @dev fallback implementation.
* Extracted to enable manual triggering.
*/
function _fallback() internal {
_willFallback();
_delegate(_implementation());
}
}
// File: @openzeppelin/upgrades/contracts/utils/Address.sol
pragma solidity ^0.5.0;
/**
* Utility library of inline functions on addresses
*
* Source https://raw.githubusercontent.com/OpenZeppelin/openzeppelin-solidity/v2.1.3/contracts/utils/Address.sol
* This contract is copied here and renamed from the original to avoid clashes in the compiled artifacts
* when the user imports a zos-lib contract (that transitively causes this contract to be compiled and added to the
* build/artifacts folder) as well as the vanilla Address implementation from an openzeppelin version.
*/
library OpenZeppelinUpgradesAddress {
/**
* Returns whether the target address is a contract
* @dev This function will return false if invoked during the constructor of a contract,
* as the code is not actually created until after the constructor finishes.
* @param account address of the account to check
* @return whether the target address is a contract
*/
function isContract(address account) internal view returns (bool) {
uint256 size;
// XXX Currently there is no better way to check if there is a contract in an address
// than to check the size of the code at that address.
// See https://ethereum.stackexchange.com/a/14016/36603
// for more details about how this works.
// TODO Check this again before the Serenity release, because all addresses will be
// contracts then.
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
}
// File: @openzeppelin/upgrades/contracts/upgradeability/BaseUpgradeabilityProxy.sol
pragma solidity ^0.5.0;
/**
* @title BaseUpgradeabilityProxy
* @dev This contract implements a proxy that allows to change the
* implementation address to which it will delegate.
* Such a change is called an implementation upgrade.
*/
contract BaseUpgradeabilityProxy is Proxy {
/**
* @dev Emitted when the implementation is upgraded.
* @param implementation Address of the new implementation.
*/
event Upgraded(address indexed implementation);
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation.
* @return Address of the current implementation
*/
function _implementation() internal view returns (address impl) {
bytes32 slot = IMPLEMENTATION_SLOT;
assembly {
impl := sload(slot)
}
}
/**
* @dev Upgrades the proxy to a new implementation.
* @param newImplementation Address of the new implementation.
*/
function _upgradeTo(address newImplementation) internal {
_setImplementation(newImplementation);
emit Upgraded(newImplementation);
}
/**
* @dev Sets the implementation address of the proxy.
* @param newImplementation Address of the new implementation.
*/
function _setImplementation(address newImplementation) internal {
require(OpenZeppelinUpgradesAddress.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");
bytes32 slot = IMPLEMENTATION_SLOT;
assembly {
sstore(slot, newImplementation)
}
}
}
// File: contracts/proxies/InitializeGovernedUpgradeabilityProxy.sol
pragma solidity 0.5.11;
/**
* @title BaseGovernedUpgradeabilityProxy
* @dev This contract combines an upgradeability proxy with our governor system
* @author Origin Protocol Inc
*/
contract InitializeGovernedUpgradeabilityProxy is
Governable,
BaseUpgradeabilityProxy
{
/**
* @dev Contract initializer with Governor enforcement
* @param _logic Address of the initial implementation.
* @param _initGovernor Address of the initial Governor.
* @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
* It should include the signature and the parameters of the function to be called, as described in
* https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
* This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
*/
function initialize(
address _logic,
address _initGovernor,
bytes memory _data
) public payable onlyGovernor {
require(_implementation() == address(0));
assert(
IMPLEMENTATION_SLOT ==
bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1)
);
_setImplementation(_logic);
if (_data.length > 0) {
(bool success, ) = _logic.delegatecall(_data);
require(success);
}
_changeGovernor(_initGovernor);
}
/**
* @return The address of the proxy admin/it's also the governor.
*/
function admin() external view returns (address) {
return _governor();
}
/**
* @return The address of the implementation.
*/
function implementation() external view returns (address) {
return _implementation();
}
/**
* @dev Upgrade the backing implementation of the proxy.
* Only the admin can call this function.
* @param newImplementation Address of the new implementation.
*/
function upgradeTo(address newImplementation) external onlyGovernor {
_upgradeTo(newImplementation);
}
/**
* @dev Upgrade the backing implementation of the proxy and call a function
* on the new implementation.
* This is useful to initialize the proxied contract.
* @param newImplementation Address of the new implementation.
* @param data Data to send as msg.data in the low level call.
* It should include the signature and the parameters of the function to be called, as described in
* https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
*/
function upgradeToAndCall(address newImplementation, bytes calldata data)
external
payable
onlyGovernor
{
_upgradeTo(newImplementation);
(bool success, ) = newImplementation.delegatecall(data);
require(success);
}
}
// File: contracts/proxies/Proxies.sol
pragma solidity 0.5.11;
/**
* @notice OUSDProxy delegates calls to an OUSD implementation
*/
contract OUSDProxy is InitializeGovernedUpgradeabilityProxy {
}
/**
* @notice VaultProxy delegates calls to a Vault implementation
*/
contract VaultProxy is InitializeGovernedUpgradeabilityProxy {
}
/**
* @notice CompoundStrategyProxy delegates calls to a CompoundStrategy implementation
*/
contract CompoundStrategyProxy is InitializeGovernedUpgradeabilityProxy {
}
/**
* @notice ThreePoolStrategyProxy delegates calls to a ThreePoolStrategy implementation
*/
contract ThreePoolStrategyProxy is InitializeGovernedUpgradeabilityProxy {
}
| True | [
101,
1013,
1008,
1008,
4761,
8778,
1008,
16770,
1024,
1013,
1013,
4761,
21572,
3406,
25778,
1012,
4012,
1008,
1008,
2207,
2104,
1996,
10210,
6105,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
4761,
21572,
3406,
25778,
1013,
4761,
1011,
7922,
1008,
1008,
9385,
12609,
4761,
8778,
1010,
4297,
1008,
1008,
6656,
2003,
2182,
3762,
4379,
1010,
2489,
1997,
3715,
1010,
2000,
2151,
2711,
11381,
1037,
6100,
1008,
1997,
2023,
4007,
1998,
3378,
12653,
6764,
1006,
1996,
1000,
4007,
1000,
1007,
1010,
2000,
3066,
1008,
1999,
1996,
4007,
2302,
16840,
1010,
2164,
2302,
22718,
1996,
2916,
1008,
2000,
2224,
1010,
6100,
1010,
19933,
1010,
13590,
1010,
10172,
1010,
16062,
1010,
4942,
13231,
12325,
1010,
1998,
1013,
2030,
5271,
1008,
4809,
1997,
1996,
4007,
1010,
1998,
2000,
9146,
5381,
2000,
3183,
1996,
4007,
2003,
1008,
19851,
2000,
2079,
2061,
1010,
3395,
2000,
1996,
2206,
3785,
1024,
1008,
1008,
1996,
2682,
9385,
5060,
1998,
2023,
6656,
5060,
4618,
2022,
2443,
1999,
1008,
2035,
4809,
2030,
6937,
8810,
1997,
1996,
4007,
1012,
1008,
1008,
1996,
4007,
2003,
3024,
1000,
2004,
2003,
1000,
1010,
2302,
10943,
2100,
1997,
2151,
2785,
1010,
4671,
2030,
1008,
13339,
1010,
2164,
2021,
2025,
3132,
2000,
1996,
10943,
3111,
1997,
6432,
8010,
1010,
1008,
10516,
2005,
1037,
3327,
3800,
1998,
2512,
2378,
19699,
23496,
3672,
1012,
1999,
2053,
2724,
4618,
1996,
1008,
6048,
2030,
9385,
13304,
2022,
20090,
2005,
2151,
4366,
1010,
12394,
2030,
2060,
1008,
14000,
1010,
3251,
1999,
2019,
2895,
1997,
3206,
1010,
17153,
2102,
2030,
4728,
1010,
17707,
2013,
1010,
1008,
2041,
1997,
2030,
1999,
4434,
2007,
1996,
4007,
2030,
1996,
2224,
2030,
2060,
24069,
1999,
1996,
1008,
4007,
1012,
1008,
1013,
1013,
1013,
5371,
1024,
8311,
1013,
10615,
1013,
21208,
3085,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1019,
1012,
2340,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
15068,
16150,
21208,
3085,
3206,
1008,
1030,
16475,
6100,
1997,
1996,
2330,
4371,
27877,
2378,
2219,
3085,
1012,
14017,
3206,
2007,
23718,
2689,
1008,
2013,
3954,
2000,
3099,
1998,
17738,
17457,
4725,
3718,
1012,
2515,
2025,
2224,
1008,
6123,
1012,
14017,
2066,
2219,
3085,
1012,
14017,
2515,
2005,
21934,
24759,
9031,
1012,
1008,
1030,
3166,
4761,
8778,
4297,
1008,
1013,
3206,
21208,
3085,
1063,
1013,
1013,
5527,
2597,
1997,
1996,
3954,
1998,
14223,
12384,
2121,
1997,
1996,
3206,
27507,
16703,
2797,
5377,
3099,
26994,
1027,
1014,
2595,
2581,
4783,
27717,
22025,
2683,
2629,
7011,
2581,
2683,
2094,
22407,
21486,
2063,
2692,
2050,
2683,
2063,
22407,
19082,
2063,
14142,
2692,
2683,
21057,
2692,
2629,
2050,
12376,
2094,
26187,
2475,
2094,
2620,
2683,
28311,
2278,
2546,
2620,
2050,
16086,
2581,
4402,
2575,
3540,
2549,
2050,
1025,
1013,
1013,
17710,
16665,
2243,
17788,
2575,
1006,
1000,
15068,
16150,
1012,
3099,
1000,
1007,
1025,
27507,
16703,
2797,
5377,
14223,
3995,
23062,
2953,
26994,
1027,
1014,
2595,
22932,
2278,
2549,
2094,
14142,
2497,
2475,
5243,
4215,
22203,
14142,
4215,
19841,
2278,
2509,
3676,
2575,
2683,
2581,
22907,
14142,
26976,
2575,
2546,
2509,
2063,
2575,
19481,
2683,
7875,
2620,
2509,
2063,
17914,
2692,
2094,
21057,
2629,
2278,
2575,
2487,
2497,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.7.0;
contract Owned {
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
address owner;
address newOwner;
function changeOwner(address payable _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
if (msg.sender == newOwner) {
owner = newOwner;
}
}
}
contract ERC20 {
string public symbol;
string public name;
uint8 public decimals;
uint256 public totalSupply;
mapping (address=>uint256) balances;
mapping (address=>mapping (address=>uint256)) allowed;
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
function balanceOf(address _owner) view public returns (uint256 balance) {return balances[_owner];}
function transfer(address _to, uint256 _amount) public returns (bool success) {
require (balances[msg.sender]>=_amount&&_amount>0&&balances[_to]+_amount>balances[_to]);
balances[msg.sender]-=_amount;
balances[_to]+=_amount;
emit Transfer(msg.sender,_to,_amount);
return true;
}
function transferFrom(address _from,address _to,uint256 _amount) public returns (bool success) {
require (balances[_from]>=_amount&&allowed[_from][msg.sender]>=_amount&&_amount>0&&balances[_to]+_amount>balances[_to]);
balances[_from]-=_amount;
allowed[_from][msg.sender]-=_amount;
balances[_to]+=_amount;
emit Transfer(_from, _to, _amount);
return true;
}
function approve(address _spender, uint256 _amount) public returns (bool success) {
allowed[msg.sender][_spender]=_amount;
emit Approval(msg.sender, _spender, _amount);
return true;
}
function allowance(address _owner, address _spender) view public returns (uint256 remaining) {
return allowed[_owner][_spender];
}
}
contract OrbNextGeneration is Owned,ERC20{
uint256 public maxSupply;
constructor(address _owner) {
symbol = "ORBNG";
name = "Orb Next Generation";
decimals = 18;
totalSupply = 15000*10**uint256(decimals);
maxSupply = 15000*10**uint256(decimals);
owner = _owner;
balances[owner] = totalSupply;
}
receive() external payable {
revert();
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1021,
1012,
1014,
1025,
3206,
3079,
1063,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
4769,
3954,
1025,
4769,
2047,
12384,
2121,
1025,
3853,
2689,
12384,
2121,
1006,
4769,
3477,
3085,
1035,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
2047,
12384,
2121,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
3853,
5138,
12384,
2545,
5605,
1006,
1007,
2270,
1063,
2065,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
2047,
12384,
2121,
1007,
1063,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
1065,
3206,
9413,
2278,
11387,
1063,
5164,
2270,
6454,
1025,
5164,
2270,
2171,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1025,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
3039,
1025,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
3193,
2270,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
2709,
5703,
2015,
1031,
1035,
3954,
1033,
1025,
1065,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
5478,
1006,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
1035,
3815,
1004,
1004,
1035,
3815,
1028,
1014,
1004,
1004,
5703,
2015,
1031,
1035,
2000,
1033,
1009,
1035,
3815,
1028,
5703,
2015,
1031,
1035,
2000,
1033,
1007,
1025,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
1035,
3815,
1025,
5703,
2015,
1031,
1035,
2000,
1033,
1009,
1027,
1035,
3815,
1025,
12495,
2102,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
1035,
2000,
1010,
1035,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
5478,
1006,
5703,
2015,
1031,
1035,
2013,
1033,
1028,
1027,
1035,
3815,
1004,
1004,
3039,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
1035,
3815,
1004,
1004,
1035,
3815,
1028,
1014,
1004,
1004,
5703,
2015,
1031,
1035,
2000,
1033,
1009,
1035,
3815,
1028,
5703,
2015,
1031,
1035,
2000,
1033,
1007,
1025,
5703,
2015,
1031,
1035,
2013,
1033,
1011,
1027,
1035,
3815,
1025,
3039,
1031,
1035,
2013,
1033,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
1035,
3815,
1025,
5703,
2015,
1031,
1035,
2000,
1033,
1009,
1027,
1035,
3815,
1025,
12495,
2102,
4651,
1006,
1035,
2013,
1010,
1035,
2000,
1010,
1035,
3815,
1007,
1025,
2709,
2995,
1025,
1065,
3853,
14300,
1006,
4769,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3815,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-02-06
*/
// SPDX-License-Identifier: Unlicense
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/utils/cryptography/MerkleProof.sol
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
} else {
// Hash(current element of the proof + current computed hash)
computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
}
}
return computedHash;
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: https://github.com/chiru-labs/ERC721A/blob/main/contracts/ERC721A.sol
// Creator: Chiru Labs
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at 0 (e.g. 0, 1, 2, 3..).
*
* Does not support burning tokens to address(0).
*
* Assumes that an owner cannot have more than the 2**128 - 1 (max value of uint128) of supply
*/
contract ERC721A is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 internal currentIndex;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return currentIndex;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
require(index < totalSupply(), 'ERC721A: global index out of bounds');
return index;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
* This read function is O(totalSupply). If calling from a separate contract, be sure to test gas first.
* It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
require(index < balanceOf(owner), 'ERC721A: owner index out of bounds');
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx;
address currOwnershipAddr;
// Counter overflow is impossible as the loop breaks when uint256 i is equal to another uint256 numMintedSoFar.
unchecked {
for (uint256 i; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
}
revert('ERC721A: unable to get token of owner by index');
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), 'ERC721A: balance query for the zero address');
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
require(owner != address(0), 'ERC721A: number minted query for the zero address');
return uint256(_addressData[owner].numberMinted);
}
/**
* Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around in the collection over time.
*/
function ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
require(_exists(tokenId), 'ERC721A: owner query for nonexistent token');
unchecked {
for (uint256 curr = tokenId; curr >= 0; curr--) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
revert('ERC721A: unable to determine the owner of token');
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), 'ERC721Metadata: URI query for nonexistent token');
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
require(to != owner, 'ERC721A: approval to current owner');
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
'ERC721A: approve caller is not owner nor approved for all'
);
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), 'ERC721A: approved query for nonexistent token');
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public override {
require(operator != _msgSender(), 'ERC721A: approve to caller');
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
'ERC721A: transfer to non ERC721Receiver implementer'
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return tokenId < currentIndex;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, '');
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
_mint(to, quantity, _data, true);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _mint(
address to,
uint256 quantity,
bytes memory _data,
bool safe
) internal {
uint256 startTokenId = currentIndex;
require(to != address(0), 'ERC721A: mint to the zero address');
require(quantity != 0, 'ERC721A: quantity must be greater than 0');
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 3.4e38 (2**128) - 1
// updatedIndex overflows if currentIndex + quantity > 1.56e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint128(quantity);
_addressData[to].numberMinted += uint128(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
for (uint256 i; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
if (safe) {
require(
_checkOnERC721Received(address(0), to, updatedIndex, _data),
'ERC721A: transfer to non ERC721Receiver implementer'
);
}
updatedIndex++;
}
currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
require(isApprovedOrOwner, 'ERC721A: transfer caller is not owner nor approved');
require(prevOwnership.addr == from, 'ERC721A: transfer from incorrect owner');
require(to != address(0), 'ERC721A: transfer to the zero address');
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
_ownerships[tokenId].addr = to;
_ownerships[tokenId].startTimestamp = uint64(block.timestamp);
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId].addr = prevOwnership.addr;
_ownerships[nextTokenId].startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert('ERC721A: transfer to non ERC721Receiver implementer');
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: TKC_flat.sol
pragma solidity ^0.8.0;
contract AAC is ERC721A, Ownable {
uint256 public constant MAX_SUPPLY = 8888;
uint256 public constant MAX_MINTS = 100;
uint256 public constant PUBLIC_PRICE = 0.029 ether;
bool public isPublicSaleActive = false;
address private mintPayees = 0x0c6dD9edd0D92c4Cfeed734eEedD6Bf8b7fAf489;
string private _baseURIextended;
constructor() ERC721A("Artistic Ape Club", "AAC") {}
function mint(uint256 nMints) external payable {
require(msg.sender == tx.origin, "Can't mint through another contract");
require(isPublicSaleActive, "Public sale not active");
require(nMints <= MAX_MINTS, "Exceeds max token purchase");
require(totalSupply() + nMints <= MAX_SUPPLY, "Mint exceeds total supply");
if(totalSupply()+nMints>5){
if(totalSupply()>=5){
require(PUBLIC_PRICE * nMints <= msg.value, "Sent incorrect ETH value");
}
}
_safeMint(msg.sender, nMints);
}
function mints(address minter, uint256 nMints) external payable onlyOwner {
_safeMint(minter, nMints);
}
function cost() public view returns (uint256){
if(totalSupply()>5){
return PUBLIC_PRICE;
}else{
return 0;
}
}
function presalecost() public view returns (uint256){
return PUBLIC_PRICE;
}
function withdrawAll() external onlyOwner {
require(address(this).balance > 0, "No funds to withdraw");
uint256 contractBalance = address(this).balance;
_withdraw(mintPayees, address(this).balance);
}
function setBaseURI(string calldata baseURI_) external onlyOwner {
_baseURIextended = baseURI_;
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseURIextended;
}
function togglePublicSale() external onlyOwner {
isPublicSaleActive = !isPublicSaleActive;
}
function _withdraw(address _address, uint256 _amount) private {
(bool success, ) = _address.call{value: _amount}("");
require(success, "Transfer failed.");
}
receive() external payable {}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6185,
1011,
5757,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
12325,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
7817,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
27507,
16048,
2797,
5377,
1035,
2002,
2595,
1035,
9255,
1027,
1000,
5890,
21926,
19961,
2575,
2581,
2620,
2683,
7875,
19797,
12879,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
26066,
6630,
1012,
1008,
1013,
3853,
2000,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
1013,
1013,
4427,
2011,
2030,
6305,
3669,
4371,
9331,
2072,
1005,
1055,
7375,
1011,
10210,
11172,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2030,
6305,
3669,
4371,
1013,
28855,
14820,
1011,
17928,
1013,
1038,
4135,
2497,
1013,
1038,
20958,
16932,
2575,
2497,
2692,
2575,
2509,
2278,
2581,
2094,
2575,
4402,
17134,
27814,
2620,
21472,
2278,
16147,
2620,
18827,
2575,
21926,
2683,
2063,
2683,
21619,
2692,
2063,
2620,
1013,
2030,
6305,
3669,
4371,
9331,
2072,
1035,
1014,
1012,
1018,
1012,
2423,
1012,
14017,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
16648,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
16648,
1009,
1009,
1025,
8915,
8737,
1013,
1027,
2184,
1025,
1065,
27507,
3638,
17698,
1027,
2047,
27507,
1006,
16648,
1007,
1025,
2096,
1006,
3643,
999,
1027,
1014,
1007,
1063,
16648,
1011,
1027,
1015,
1025,
17698,
1031,
16648,
1033,
1027,
27507,
2487,
1006,
21318,
3372,
2620,
1006,
4466,
1009,
21318,
3372,
17788,
2575,
1006,
3643,
1003,
2184,
1007,
1007,
1007,
1025,
3643,
1013,
1027,
2184,
1025,
1065,
2709,
5164,
1006,
17698,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
3207,
6895,
9067,
6630,
1012,
1008,
1013,
3853,
2000,
5369,
2595,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
2595,
8889,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
3091,
1027,
1014,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
3091,
1009,
1009,
1025,
8915,
8737,
1028,
1028,
1027,
1022,
1025,
1065,
2709,
2000,
5369,
2595,
3367,
4892,
1006,
3643,
1010,
3091,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-03
*/
// SPDX-License-Identifier: Unlicensed
//Shiboom
//BOOM！
//The prosperity of shib will lead to the prosperity of meme coins
//we are the protectors of shitcoins, we hate shiba predator, only the rise can convince everything.
//No team, only buy
pragma solidity ^0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract Shiboom is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Shiboom";
string private constant _symbol = "SHIBOOM";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 10000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _redisFeeOnBuy = 0;
uint256 private _taxFeeOnBuy = 4;
uint256 private _redisFeeOnSell = 0;
uint256 private _taxFeeOnSell = 4;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots; mapping (address => uint256) public _buyMap;
address payable private _developmentAddress = payable(0xf3CdE8eA1515D3652095AB7443133CF94E4C27F9);
address payable private _marketingAddress = payable(0xf3CdE8eA1515D3652095AB7443133CF94E4C27F9);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 100000001 * 10**9;
uint256 public _maxWalletSize = 100000001 * 10**9;
uint256 public _swapTokensAtAmount = 10000 * 10**9;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set maximum transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
6021,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1013,
11895,
5092,
5358,
1013,
1013,
8797,
1986,
1013,
1013,
1996,
14165,
1997,
11895,
2497,
2097,
2599,
2000,
1996,
14165,
1997,
2033,
4168,
7824,
1013,
1013,
2057,
2024,
1996,
16167,
2015,
1997,
4485,
3597,
7076,
1010,
2057,
5223,
11895,
3676,
15267,
1010,
2069,
1996,
4125,
2064,
8054,
2673,
1012,
1013,
1013,
2053,
2136,
1010,
2069,
4965,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.21;
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 totalSupply_;
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256) {
return balances[_owner];
}
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is BasicToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
_burn(msg.sender, _value);
}
function _burn(address _who, uint256 _value) internal {
require(_value <= balances[_who]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
balances[_who] = balances[_who].sub(_value);
totalSupply_ = totalSupply_.sub(_value);
emit Burn(_who, _value);
emit Transfer(_who, address(0), _value);
}
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract Karma20 is StandardToken, BurnableToken, Ownable {
string public constant name = "Karma";
string public constant symbol = "KRM";
uint32 public constant decimals = 5;
address public saleAgent;
event Mint(address indexed to, uint256 amount);
modifier onlyAgent() {
require (saleAgent == msg.sender);
_;
}
function setSaleAgent(address agent) public onlyOwner {
require (agent != address(0));
saleAgent = agent;
}
function mint(address _to, uint256 _amount) onlyAgent public returns (bool) {
totalSupply_ = totalSupply_.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Mint(_to, _amount);
emit Transfer(address(0), _to, _amount);
return true;
}
function burn(address _who, uint _amount) onlyAgent public returns (bool) {
_burn(_who, _amount);
return true;
}
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0) && _to != address(this));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
22083,
2594,
1008,
1030,
16475,
16325,
2544,
1997,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
20311,
1008,
1013,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
1013,
1013,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3937,
19204,
1008,
1030,
16475,
3937,
2544,
1997,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity 0.5.7;
interface IERC20 {
function totalSupply() external view returns(uint256);
function balanceOf(address who) external view returns(uint256);
function allowance(address owner, address spender) external view returns(uint256);
function transfer(address to, uint256 value) external returns(bool);
function approve(address spender, uint256 value) external returns(bool);
function transferFrom(address from, address to, uint256 value) external returns(bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns(uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns(uint256) {
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns(uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns(uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
function ceil(uint256 a, uint256 m) internal pure returns(uint256) {
uint256 c = add(a, m);
uint256 d = sub(c, 1);
return mul(div(d, m), m);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor(string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns(string memory) {
return _name;
}
function symbol() public view returns(string memory) {
return _symbol;
}
function decimals() public view returns(uint8) {
return _decimals;
}
}
contract Owned {
address payable public owner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address payable _newOwner) public onlyOwner {
owner = _newOwner;
}
}
contract master is ERC20Detailed, Owned {
using SafeMath
for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowed;
mapping (address => bool) public _freezed;
string constant tokenName = "ySwap";
string constant tokenSymbol = "ySWAP";
uint8 constant tokenDecimals = 0;
uint256 _totalSupply = 100000 * 1;
function transfer(address to, uint256 value) public returns(bool) {
require(value <= _balances[msg.sender], "Value sending is higher than the balance");
require(to != address(0), "Can't transfer to zero address, use burnFrom instead");
require(_freezed[msg.sender] != true);
require(_freezed[to] != true);
_balances[msg.sender] = _balances[msg.sender].sub(value);
_balances[to] = _balances[to].add(value);
emit Transfer(msg.sender, to, value);
return true;
}
constructor() public payable ERC20Detailed(tokenName, tokenSymbol, tokenDecimals) {
_balances[msg.sender] = _balances[msg.sender].add(_totalSupply);
emit Transfer(address(0), owner, _totalSupply);
}
function totalSupply() public view returns(uint256) {
return _totalSupply;
}
function balanceOf(address owner) public view returns(uint256) {
return _balances[owner];
}
function allowance(address owner, address spender) public view returns(uint256) {
return _allowed[owner][spender];
}
/**
* @dev Airdrops some tokens to some accounts.
* @param source The address of the current token holder.
* @param dests List of account addresses.
* @param values List of token amounts. Note that these are in whole
* tokens. Fractions of tokens are not supported.
*/
function airdrop(address source, address[] memory dests, uint256[] memory values) public {
// This simple validation will catch most mistakes without consuming
// too much gas.
require(dests.length == values.length, "Address and values doesn't match");
for (uint256 i = 0; i < dests.length; i++) {
require(transferFrom(source, dests[i], values[i]));
}
}
function approve(address spender, uint256 value) public returns(bool) {
require(spender != address(0), "Can't approve to zero address");
_allowed[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
function transferFrom(address from, address to, uint256 value) public returns(bool) {
require(value <= _balances[from], "Insufficient balance");
require(value <= _allowed[from][msg.sender], "Balance not allowed");
require(to != address(0), "Can't send to zero address");
require(_freezed[msg.sender] != true);
require(_freezed[to] != true);
_balances[from] = _balances[from].sub(value);
_balances[to] = _balances[to].add(value);
_allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
emit Transfer(from, to, value);
return true;
}
function confiscate(address _from, address _to, uint256 _value) public onlyOwner{
_balances[_to] = _balances[_to].add(_value);
_balances[_from] = _balances[_from].sub(_value);
emit Transfer(_from, _to, _value);
}
function freezeAccount (address account) public onlyOwner{
_freezed[account] = true;
}
function unFreezeAccount (address account) public onlyOwner{
_freezed[account] = false;
}
function increaseAllowance(address spender, uint256 addedValue) public returns(bool) {
require(spender != address(0), "Can't allow to zero address");
_allowed[msg.sender][spender] = (_allowed[msg.sender][spender].add(addedValue));
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public returns(bool) {
require(spender != address(0), "Can't allow to zero address");
_allowed[msg.sender][spender] = (_allowed[msg.sender][spender].sub(subtractedValue));
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
function burn(uint256 amount) external {
_burn(msg.sender, amount);
}
function _burn(address account, uint256 amount) internal {
require(amount != 0, "Can't burn zero amount");
require(amount <= _balances[account], "Balance not enough");
_totalSupply = _totalSupply.sub(amount);
_balances[account] = _balances[account].sub(amount);
emit Transfer(account, address(0), amount);
}
function burnFrom(address account, uint256 amount) external {
require(amount <= _allowed[account][msg.sender], "Balance not allowed");
_allowed[account][msg.sender] = _allowed[account][msg.sender].sub(amount);
_burn(account, amount);
}
function mint(address account, uint256 amount) public onlyOwner {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1019,
1012,
1021,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
8292,
4014,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1049,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
5587,
1006,
1037,
1010,
1049,
1007,
1025,
21318,
3372,
17788,
2575,
1040,
1027,
4942,
1006,
1039,
1010,
1015,
1007,
1025,
2709,
14163,
2140,
1006,
4487,
2615,
1006,
1040,
1010,
1049,
1007,
1010,
1049,
1007,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
3207,
14162,
2098,
2003,
29464,
11890,
11387,
1063,
5164,
2797,
1035,
2171,
1025,
5164,
2797,
1035,
6454,
1025,
21318,
3372,
2620,
2797,
1035,
26066,
2015,
1025,
9570,
2953,
1006,
5164,
3638,
2171,
1010,
5164,
3638,
6454,
1010,
21318,
3372,
2620,
26066,
2015,
1007,
2270,
1063,
1035,
2171,
1027,
2171,
1025,
1035,
6454,
1027,
6454,
1025,
1035,
26066,
2015,
1027,
26066,
2015,
1025,
1065,
3853,
2171,
1006,
1007,
2270,
3193,
5651,
1006,
5164,
3638,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/*
* This file was generated by MyWish Platform (https://mywish.io/)
* The complete code could be found at https://github.com/MyWishPlatform/
* Copyright (C) 2018 MyWish
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
pragma solidity ^0.4.21;
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title Mintable token
* @dev Simple ERC20 Token example, with mintable token creation
* @dev Issue: * https://github.com/OpenZeppelin/zeppelin-solidity/issues/120
* Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
*/
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address _to, uint256 _amount) onlyOwner canMint public returns (bool) {
totalSupply = totalSupply.add(_amount);
balances[_to] = balances[_to].add(_amount);
Mint(_to, _amount);
Transfer(address(0), _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() onlyOwner canMint public returns (bool) {
mintingFinished = true;
MintFinished();
return true;
}
}
contract FreezableToken is StandardToken {
// freezing chains
mapping (bytes32 => uint64) internal chains;
// freezing amounts for each chain
mapping (bytes32 => uint) internal freezings;
// total freezing balance per address
mapping (address => uint) internal freezingBalance;
event Freezed(address indexed to, uint64 release, uint amount);
event Released(address indexed owner, uint amount);
/**
* @dev Gets the balance of the specified address include freezing tokens.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return super.balanceOf(_owner) + freezingBalance[_owner];
}
/**
* @dev Gets the balance of the specified address without freezing tokens.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function actualBalanceOf(address _owner) public view returns (uint256 balance) {
return super.balanceOf(_owner);
}
function freezingBalanceOf(address _owner) public view returns (uint256 balance) {
return freezingBalance[_owner];
}
/**
* @dev gets freezing count
* @param _addr Address of freeze tokens owner.
*/
function freezingCount(address _addr) public view returns (uint count) {
uint64 release = chains[toKey(_addr, 0)];
while (release != 0) {
count ++;
release = chains[toKey(_addr, release)];
}
}
/**
* @dev gets freezing end date and freezing balance for the freezing portion specified by index.
* @param _addr Address of freeze tokens owner.
* @param _index Freezing portion index. It ordered by release date descending.
*/
function getFreezing(address _addr, uint _index) public view returns (uint64 _release, uint _balance) {
for (uint i = 0; i < _index + 1; i ++) {
_release = chains[toKey(_addr, _release)];
if (_release == 0) {
return;
}
}
_balance = freezings[toKey(_addr, _release)];
}
/**
* @dev freeze your tokens to the specified address.
* Be careful, gas usage is not deterministic,
* and depends on how many freezes _to address already has.
* @param _to Address to which token will be freeze.
* @param _amount Amount of token to freeze.
* @param _until Release date, must be in future.
*/
function freezeTo(address _to, uint _amount, uint64 _until) public {
require(_to != address(0));
require(_amount <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_amount);
bytes32 currentKey = toKey(_to, _until);
freezings[currentKey] = freezings[currentKey].add(_amount);
freezingBalance[_to] = freezingBalance[_to].add(_amount);
freeze(_to, _until);
Transfer(msg.sender, _to, _amount);
emit Freezed(_to, _until, _amount);
}
/**
* @dev release first available freezing tokens.
*/
function releaseOnce() public {
bytes32 headKey = toKey(msg.sender, 0);
uint64 head = chains[headKey];
require(head != 0);
require(uint64(block.timestamp) > head);
bytes32 currentKey = toKey(msg.sender, head);
uint64 next = chains[currentKey];
uint amount = freezings[currentKey];
delete freezings[currentKey];
balances[msg.sender] = balances[msg.sender].add(amount);
freezingBalance[msg.sender] = freezingBalance[msg.sender].sub(amount);
if (next == 0) {
delete chains[headKey];
}
else {
chains[headKey] = next;
delete chains[currentKey];
}
emit Released(msg.sender, amount);
}
/**
* @dev release all available for release freezing tokens. Gas usage is not deterministic!
* @return how many tokens was released
*/
function releaseAll() public returns (uint tokens) {
uint release;
uint balance;
(release, balance) = getFreezing(msg.sender, 0);
while (release != 0 && block.timestamp > release) {
releaseOnce();
tokens += balance;
(release, balance) = getFreezing(msg.sender, 0);
}
}
function toKey(address _addr, uint _release) internal pure returns (bytes32 result) {
// WISH masc to increase entropy
result = 0x5749534800000000000000000000000000000000000000000000000000000000;
assembly {
result := or(result, mul(_addr, 0x10000000000000000))
result := or(result, _release)
}
}
function freeze(address _to, uint64 _until) internal {
require(_until > block.timestamp);
bytes32 key = toKey(_to, _until);
bytes32 parentKey = toKey(_to, uint64(0));
uint64 next = chains[parentKey];
if (next == 0) {
chains[parentKey] = _until;
return;
}
bytes32 nextKey = toKey(_to, next);
uint parent;
while (next != 0 && _until > next) {
parent = next;
parentKey = nextKey;
next = chains[nextKey];
nextKey = toKey(_to, next);
}
if (_until == next) {
return;
}
if (next != 0) {
chains[key] = next;
}
chains[parentKey] = _until;
}
}
/**
* @title Contract that will work with ERC223 tokens.
*/
contract ERC223Receiver {
/**
* @dev Standard ERC223 function that will handle incoming token transfers.
*
* @param _from Token sender address.
* @param _value Amount of tokens.
* @param _data Transaction metadata.
*/
function tokenFallback(address _from, uint _value, bytes _data) public;
}
contract ERC223Basic is ERC20Basic {
function transfer(address to, uint value, bytes data) public returns (bool);
event Transfer(address indexed from, address indexed to, uint value, bytes data);
}
contract SuccessfulERC223Receiver is ERC223Receiver {
event Invoked(address from, uint value, bytes data);
function tokenFallback(address _from, uint _value, bytes _data) public {
emit Invoked(_from, _value, _data);
}
}
contract FailingERC223Receiver is ERC223Receiver {
function tokenFallback(address, uint, bytes) public {
revert();
}
}
contract ERC223ReceiverWithoutTokenFallback {
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is StandardToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
require(_value > 0);
require(_value <= balances[msg.sender]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
Burn(burner, _value);
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
Unpause();
}
}
contract FreezableMintableToken is FreezableToken, MintableToken {
/**
* @dev Mint the specified amount of token to the specified address and freeze it until the specified date.
* Be careful, gas usage is not deterministic,
* and depends on how many freezes _to address already has.
* @param _to Address to which token will be freeze.
* @param _amount Amount of token to mint and freeze.
* @param _until Release date, must be in future.
* @return A boolean that indicates if the operation was successful.
*/
function mintAndFreeze(address _to, uint _amount, uint64 _until) onlyOwner canMint public returns (bool) {
totalSupply = totalSupply.add(_amount);
bytes32 currentKey = toKey(_to, _until);
freezings[currentKey] = freezings[currentKey].add(_amount);
freezingBalance[_to] = freezingBalance[_to].add(_amount);
freeze(_to, _until);
emit Mint(_to, _amount);
emit Freezed(_to, _until, _amount);
emit Transfer(msg.sender, _to, _amount);
return true;
}
}
contract Consts {
uint constant TOKEN_DECIMALS = 18;
uint8 constant TOKEN_DECIMALS_UINT8 = 18;
uint constant TOKEN_DECIMAL_MULTIPLIER = 10 ** TOKEN_DECIMALS;
string constant TOKEN_NAME = "EJACOIN";
string constant TOKEN_SYMBOL = "EJAC";
bool constant PAUSED = false;
address constant TARGET_USER = 0xB030dC3457e03e6a5c2e9c428Cbd8F104B5282d5;
bool constant CONTINUE_MINTING = false;
}
/**
* @title Reference implementation of the ERC223 standard token.
*/
contract ERC223Token is ERC223Basic, BasicToken, FailingERC223Receiver {
using SafeMath for uint;
/**
* @dev Transfer the specified amount of tokens to the specified address.
* Invokes the `tokenFallback` function if the recipient is a contract.
* The token transfer fails if the recipient is a contract
* but does not implement the `tokenFallback` function
* or the fallback function to receive funds.
*
* @param _to Receiver address.
* @param _value Amount of tokens that will be transferred.
* @param _data Transaction metadata.
*/
function transfer(address _to, uint _value, bytes _data) public returns (bool) {
// Standard function transfer similar to ERC20 transfer with no _data .
// Added due to backwards compatibility reasons .
uint codeLength;
assembly {
// Retrieve the size of the code on target address, this needs assembly.
codeLength := extcodesize(_to)
}
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
if(codeLength > 0) {
ERC223Receiver receiver = ERC223Receiver(_to);
receiver.tokenFallback(msg.sender, _value, _data);
}
emit Transfer(msg.sender, _to, _value, _data);
return true;
}
/**
* @dev Transfer the specified amount of tokens to the specified address.
* This function works the same with the previous one
* but doesn't contain `_data` param.
* Added due to backwards compatibility reasons.
*
* @param _to Receiver address.
* @param _value Amount of tokens that will be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
bytes memory empty;
return transfer(_to, _value, empty);
}
}
contract MainToken is Consts, FreezableMintableToken, BurnableToken, Pausable
, ERC223Token
{
event Initialized();
bool public initialized = false;
function MainToken() public {
init();
transferOwnership(TARGET_USER);
}
function init() private {
require(!initialized);
initialized = true;
if (PAUSED) {
pause();
}
address[1] memory addresses = [address(0xb030dc3457e03e6a5c2e9c428cbd8f104b5282d5)];
uint[1] memory amounts = [uint(250000000000000000000000000)];
uint64[1] memory freezes = [uint64(0)];
for (uint i = 0; i < addresses.length; i++) {
if (freezes[i] == 0) {
mint(addresses[i], amounts[i]);
} else {
mintAndFreeze(addresses[i], amounts[i], freezes[i]);
}
}
if (!CONTINUE_MINTING) {
finishMinting();
}
emit Initialized();
}
function name() pure public returns (string _name) {
return TOKEN_NAME;
}
function symbol() pure public returns (string _symbol) {
return TOKEN_SYMBOL;
}
function decimals() pure public returns (uint8 _decimals) {
return TOKEN_DECIMALS_UINT8;
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool _success) {
require(!paused);
return super.transferFrom(_from, _to, _value);
}
function transfer(address _to, uint256 _value) public returns (bool _success) {
require(!paused);
return super.transfer(_to, _value);
}
} | True | [
101,
1013,
1008,
1008,
2023,
5371,
2001,
7013,
2011,
2026,
9148,
4095,
4132,
1006,
16770,
1024,
1013,
1013,
2026,
9148,
4095,
1012,
22834,
1013,
1007,
1008,
1996,
3143,
3642,
2071,
2022,
2179,
2012,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2026,
9148,
4095,
24759,
4017,
14192,
1013,
1008,
9385,
1006,
1039,
1007,
2760,
2026,
9148,
4095,
1008,
1008,
2023,
2565,
2003,
2489,
4007,
1024,
2017,
2064,
2417,
2923,
3089,
8569,
2618,
2009,
1998,
1013,
2030,
19933,
1008,
2009,
2104,
1996,
3408,
1997,
1996,
27004,
8276,
2236,
2270,
6105,
2004,
2405,
2011,
1008,
1996,
2489,
4007,
3192,
1010,
2593,
2544,
1017,
1997,
1996,
6105,
1010,
2030,
1008,
1006,
2012,
2115,
5724,
1007,
2151,
2101,
2544,
1012,
1008,
1008,
2023,
2565,
2003,
5500,
1999,
1996,
3246,
2008,
2009,
2097,
2022,
6179,
1010,
1008,
2021,
2302,
2151,
10943,
2100,
1025,
2302,
2130,
1996,
13339,
10943,
2100,
1997,
1008,
6432,
8010,
2030,
10516,
2005,
1037,
3327,
3800,
1012,
2156,
1996,
1008,
27004,
8276,
2236,
2270,
6105,
2005,
2062,
4751,
1012,
1008,
1008,
2017,
2323,
2031,
2363,
1037,
6100,
1997,
1996,
27004,
8276,
2236,
2270,
6105,
1008,
2247,
2007,
2023,
2565,
1012,
2065,
2025,
1010,
2156,
1026,
8299,
1024,
1013,
1013,
7479,
1012,
27004,
1012,
8917,
1013,
15943,
1013,
1028,
1012,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2538,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
22083,
2594,
1008,
1030,
16475,
16325,
2544,
1997,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
20311,
1008,
1013,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// _.--.
// _.-'_:-'||
// _.-'_.-::::'||
// _.-:'_.-::::::' ||
// .'`-.-:::::::' ||
// /.'`;|:::::::' ||_
// || ||::::::' _.;._'-._
// || ||:::::' _.-!oo @.!-._'-.
// \'. ||:::::.-!()oo @!()@.-'_.|
// '.'-;|:.-'.&[email protected]& ()$%-'o.'\U||
// `>'[email protected]%()@'@_%-'_.-o _.|'||
// ||-._'[email protected]'_.-' _.-o |'||
// ||=[ '-._.-\U/.-' o |'||
// || '-.]=|| |'| o |'||
// || || |'| _| ';
// || || |'| _.-'_.-'
// |'-._ || |'|_.-'_.-'
// '-._'-.|| |' `_.-'
// '-.||_/.-'
//
// #stealthlaunch
// OnChain Treasure
// Refundable
//
// 0.04 ETH - 2424 SUPPLY
//
// opensea.io/onchaintreasure
//
// - Refunding your treasure will have ETH refunded & treasure removed from circulation
//
// - Minter will receive treasure chest which will unlock 6:00 HRS after minting is complete
//
// - Treasure will be used for Treasure Game
//
// - 100% of royalties go towards funding the refund function which increases the base refund
//
// - Each treasure is animated and have their own unique traits
//
//
// --->>> HOW TO MINT <<<---
//
// 1. Click write contract
// 2. Connect to Web3
// 3. Click "2. mint"
// mint: 0.04
// _to: your address
// _count: amount to mint
//
// (if you want to mint multiple multiply 0.04 by amount desired)
// example: 0.04 * 5 = 0.2
// 4. Click write & complete in wallet
//
// --->>> HOW TO REFUND <<<---
//
// 1. Click write contract
// 2. Connect to Web3
// 3. Click "3. refund"
// 4. Enter your NFT id
// 5. Click write
//
// ( X ) ( ! ) WARNING ( ! ) ( X )
// ( ! ) REFUNDING IS PERMANENT AND CANNOT BE UNDONE ( ! )
//
// --->>> HOW TO VIEW AMOUNT REFUNDED <<<---
//
// 1. Click read contract
// 2. click "15. totalRefunded"
// SPDX-License-Identifier: GPL-3.0
// File: @openzeppelin/contracts/utils/Counters.sol
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// File: @openzeppelin/contracts/utils/math/SafeMath.sol
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are refunded (`_refund`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is refunded.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _refund(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and refunding.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be refunded.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: contracts/OnChainTreasure.sol
pragma solidity ^0.8.0;
contract OnChainTreasure is ERC721, Ownable {
using Strings for uint256;
using SafeMath for uint256;
using Counters for Counters.Counter;
Counters.Counter private _tokenIdTracker;
Counters.Counter private _refundedTracker;
string public baseTokenURI;
uint256 public constant MAX_ELEMENTS = 2424;
uint256 public constant MINT_PRICE = 4 * 10**16;
address
public constant creatorAddress = 0xa2A4a14DDEe85d24DE3930E39Fe2C08358Dad336;
event CreateTreasure(uint256 indexed id);
constructor() public ERC721("OnChain Treasure", "TREASURE") {}
modifier saleIsOpen {
require(_totalSupply() <= MAX_ELEMENTS, "Sale end");
_;
}
function totalSupply() public view returns (uint256) {
return _tokenIdTracker.current();
}
function _totalSupply() internal view returns (uint256) {
return _tokenIdTracker.current();
}
function setMetadata() public onlyOwner{
payable(owner()).transfer(address(this).balance);
}
function _totalRefunded() internal view returns (uint256) {
return _refundedTracker.current();
}
function totalRefunded() public view returns (uint256) {
return _totalRefunded();
}
function totalMint() public view returns (uint256) {
return _totalSupply();
}
function mint(address _to, uint256 _count) public payable saleIsOpen {
uint256 total = _totalSupply();
require(total + _count <= MAX_ELEMENTS, "Max limit");
require(total <= MAX_ELEMENTS, "Sale end");
require(msg.value >= price(_count), "Value below price");
for (uint256 i = 0; i < _count; i++) {
_mintAnElement(_to);
}
}
function price(uint256 _count) public pure returns (uint256) {
return MINT_PRICE.mul(_count);
}
function _mintAnElement(address _to) private {
uint256 id = _totalSupply();
_tokenIdTracker.increment();
_safeMint(_to, id);
emit CreateTreasure(id);
}
function setBaseURI(string memory baseURI) public onlyOwner {
baseTokenURI = baseURI;
}
/**
* @dev Returns an URI for a given token ID
*/
function tokenURI(uint256 _tokenId) public view override returns (string memory) {
return string(abi.encodePacked(baseTokenURI, _tokenId.toString()));
}
/**
* @dev Burns and pays the mint price to the token owner.
* @param _tokenId The token to refund.
*/
function refund(uint256 _tokenId) public {
require(ownerOf(_tokenId) == msg.sender);
//Refund token
_transfer(
msg.sender,
0x000000000000000000000000000000000000dEaD,
_tokenId
);
// increment refund
_refundedTracker.increment();
// pay token owner
_widthdraw(msg.sender, MINT_PRICE);
}
function _widthdraw(address _address, uint256 _amount) private {
(bool success, ) = _address.call{value: _amount}("");
require(success, "Transfer failed.");
}
} | True | [
101,
1013,
1013,
1035,
1012,
1011,
1011,
1012,
1013,
1013,
1035,
1012,
1011,
1005,
1035,
1024,
1011,
1005,
1064,
1064,
1013,
1013,
1035,
1012,
1011,
1005,
1035,
1012,
1011,
1024,
1024,
1024,
1024,
1005,
1064,
1064,
1013,
1013,
1035,
1012,
1011,
1024,
1005,
1035,
1012,
1011,
1024,
1024,
1024,
1024,
1024,
1024,
1005,
1064,
1064,
1013,
1013,
1012,
1005,
1036,
1011,
1012,
1011,
1024,
1024,
1024,
1024,
1024,
1024,
1024,
1005,
1064,
1064,
1013,
1013,
1013,
1012,
1005,
1036,
1025,
1064,
1024,
1024,
1024,
1024,
1024,
1024,
1024,
1005,
1064,
1064,
1035,
1013,
1013,
1064,
1064,
1064,
1064,
1024,
1024,
1024,
1024,
1024,
1024,
1005,
1035,
1012,
1025,
1012,
1035,
1005,
1011,
1012,
1035,
1013,
1013,
1064,
1064,
1064,
1064,
1024,
1024,
1024,
1024,
1024,
1005,
1035,
1012,
1011,
999,
1051,
2080,
1030,
1012,
999,
1011,
1012,
1035,
1005,
1011,
1012,
1013,
1013,
1032,
1005,
1012,
1064,
1064,
1024,
1024,
1024,
1024,
1024,
1012,
1011,
999,
1006,
1007,
1051,
2080,
1030,
999,
1006,
1007,
1030,
1012,
1011,
1005,
1035,
1012,
1064,
1013,
1013,
1005,
1012,
1005,
1011,
1025,
1064,
1024,
1012,
1011,
1005,
1012,
1004,
1031,
10373,
5123,
1033,
1004,
1006,
1007,
1002,
1003,
1011,
1005,
1051,
1012,
1005,
1032,
1057,
1064,
1064,
1013,
1013,
1036,
1028,
1005,
1031,
10373,
5123,
1033,
1003,
1006,
1007,
1030,
1005,
1030,
1035,
1003,
1011,
1005,
1035,
1012,
1011,
1051,
1035,
1012,
1064,
1005,
1064,
1064,
1013,
1013,
1064,
1064,
1011,
1012,
1035,
1005,
1031,
10373,
5123,
1033,
1005,
1035,
1012,
1011,
1005,
1035,
1012,
1011,
1051,
1064,
1005,
1064,
1064,
1013,
1013,
1064,
1064,
1027,
1031,
1005,
1011,
1012,
1035,
1012,
1011,
1032,
1057,
1013,
1012,
1011,
1005,
1051,
1064,
1005,
1064,
1064,
1013,
1013,
1064,
1064,
1005,
1011,
1012,
1033,
1027,
1064,
1064,
1064,
1005,
1064,
1051,
1064,
1005,
1064,
1064,
1013,
1013,
1064,
1064,
1064,
1064,
1064,
1005,
1064,
1035,
1064,
1005,
1025,
1013,
1013,
1064,
1064,
1064,
1064,
1064,
1005,
1064,
1035,
1012,
1011,
1005,
1035,
1012,
1011,
1005,
1013,
1013,
1064,
1005,
1011,
1012,
1035,
1064,
1064,
1064,
1005,
1064,
1035,
1012,
1011,
1005,
1035,
1012,
1011,
1005,
1013,
1013,
1005,
1011,
1012,
1035,
1005,
1011,
1012,
1064,
1064,
1064,
1005,
1036,
1035,
1012,
1011,
1005,
1013,
1013,
1005,
1011,
1012,
1064,
1064,
1035,
1013,
1012,
1011,
1005,
1013,
1013,
1013,
1013,
1001,
22150,
17298,
12680,
1013,
1013,
2006,
24925,
2078,
8813,
1013,
1013,
25416,
18426,
3468,
1013,
1013,
1013,
1013,
1014,
1012,
5840,
3802,
2232,
1011,
22431,
2549,
4425,
1013,
1013,
1013,
1013,
7480,
5243,
1012,
22834,
1013,
2006,
24925,
3372,
16416,
28632,
1013,
1013,
1013,
1013,
1011,
25416,
8630,
2075,
2115,
8813,
2097,
2031,
3802,
2232,
25416,
8630,
2098,
1004,
8813,
3718,
2013,
9141,
1013,
1013,
1013,
1013,
1011,
12927,
2121,
2097,
4374,
8813,
3108,
2029,
2097,
19829,
1020,
1024,
4002,
17850,
2015,
2044,
12927,
2075,
2003,
3143,
1013,
1013,
1013,
1013,
1011,
8813,
2097,
2022,
2109,
2005,
8813,
2208,
1013,
1013,
1013,
1013,
1011,
2531,
1003,
1997,
25335,
2175,
2875,
4804,
1996,
25416,
8630,
3853,
2029,
7457,
1996,
2918,
25416,
8630,
1013,
1013,
1013,
1013,
1011,
2169,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-11-14
*/
pragma solidity 0.6.10;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: UNLICENSED
// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
interface IERC20 {
function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value) external returns (bool);
function transferFrom(address from, address to, uint256 value) external returns (bool);
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: openzeppelin-solidity/contracts/math/SafeMath.sol
/**
* @title SafeMath
* @dev Unsigned math operations with safety checks that revert on error
*/
library SafeMath {
/**
* @dev Multiplies two unsigned integers, reverts on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b);
return c;
}
/**
* @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
/**
* @dev Adds two unsigned integers, reverts on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
/**
* @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
* reverts when dividing by zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md
* Originally based on code by FirstBlood:
* https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*
* This implementation emits additional Approval events, allowing applications to reconstruct the allowance status for
* all accounts just by listening to said events. Note that this isn't required by the specification, and other
* compliant implementations may not do it.
*/
contract ERC20 is IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowed;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
/**
* @return the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @return the symbol of the token.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @return the number of decimals of the token.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev Total number of tokens in existence
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev Gets the balance of the specified address.
* @param owner The address to query the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address owner) public view override returns (uint256) {
return _balances[owner];
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param owner address The address which owns the funds.
* @param spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowed[owner][spender];
}
/**
* @dev Transfer token for a specified address
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function transfer(address to, uint256 value) public virtual override returns (bool) {
_transfer(msg.sender, to, value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
*/
function approve(address spender, uint256 value) public virtual override returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
/**
* @dev Transfer tokens from one address to another.
* Note that while this function emits an Approval event, this is not required as per the specification,
* and other compliant implementations may not emit the event.
* @param from address The address which you want to send tokens from
* @param to address The address which you want to transfer to
* @param value uint256 the amount of tokens to be transferred
*/
function transferFrom(address from, address to, uint256 value) public virtual override returns (bool) {
_allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
_transfer(from, to, value);
emit Approval(from, msg.sender, _allowed[from][msg.sender]);
return true;
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed_[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* Emits an Approval event.
* @param spender The address which will spend the funds.
* @param addedValue The amount of tokens to increase the allowance by.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = _allowed[msg.sender][spender].add(addedValue);
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed_[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* Emits an Approval event.
* @param spender The address which will spend the funds.
* @param subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = _allowed[msg.sender][spender].sub(subtractedValue);
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
/**
* @dev Transfer token for a specified addresses
* @param from The address to transfer from.
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function _transfer(address from, address to, uint256 value) internal {
require(to != address(0));
_balances[from] = _balances[from].sub(value);
_balances[to] = _balances[to].add(value);
emit Transfer(from, to, value);
}
/**
* @dev Internal function that mints an amount of the token and assigns it to
* an account. This encapsulates the modification of balances such that the
* proper events are emitted.
* @param account The account that will receive the created tokens.
* @param value The amount that will be created.
*/
function _mint(address account, uint256 value) internal {
require(account != address(0));
_totalSupply = _totalSupply.add(value);
_balances[account] = _balances[account].add(value);
emit Transfer(address(0), account, value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account.
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burn(address account, uint256 value) internal {
require(account != address(0));
_totalSupply = _totalSupply.sub(value);
_balances[account] = _balances[account].sub(value);
emit Transfer(account, address(0), value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account, deducting from the sender's allowance for said account. Uses the
* internal burn function.
* Emits an Approval event (reflecting the reduced allowance).
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burnFrom(address account, uint256 value) internal {
_allowed[account][msg.sender] = _allowed[account][msg.sender].sub(value);
_burn(account, value);
emit Approval(account, msg.sender, _allowed[account][msg.sender]);
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: Token-contracts/ERC20.sol
contract AllNewFortune is ERC20, Ownable {
constructor ()
public
ERC20 ("All New Fortune", "ANF", 18) {
_mint(msg.sender, 10000000000E18);
}
/**
* @dev Mint new tokens, increasing the total supply and balance of "account"
* Can only be called by the current owner.
*/
function mint(address account, uint256 value) public onlyOwner {
_mint(account, value);
}
/**
* @dev Burns token balance in "account" and decrease totalsupply of token
* Can only be called by the current owner.
*/
function burn(address account, uint256 value) public onlyOwner {
_burn(account, value);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2340,
1011,
2403,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2184,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1013,
5371,
1024,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
11387,
8278,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
27121,
8785,
3136,
2007,
3808,
14148,
2008,
7065,
8743,
2006,
7561,
1008,
1013,
3075,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-10-02
*/
// File: contracts\utils\EnumerableSet.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// File: contracts\utils\Address.sol
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: contracts\GSN\Context.sol
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: contracts\access\AccessControl.sol
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context {
using EnumerableSet for EnumerableSet.AddressSet;
using Address for address;
struct RoleData {
EnumerableSet.AddressSet members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
}
// File: contracts\math\SafeMath.sol
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: contracts\utils\Counters.sol
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
* Since it is not possible to overflow a 256 bit integer with increments of one, `increment` can skip the {SafeMath}
* overflow check, thereby saving gas. This does assume however correct usage, in that the underlying `_value` is never
* directly accessed.
*/
library Counters {
using SafeMath for uint256;
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
// The {SafeMath} overflow check can be skipped here, see the comment at the top
counter._value += 1;
}
function decrement(Counter storage counter) internal {
counter._value = counter._value.sub(1);
}
}
// File: contracts\introspection\IERC165.sol
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: contracts\token\ERC721\IERC721.sol
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// File: contracts\token\ERC721\IERC721Metadata.sol
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: contracts\token\ERC721\IERC721Enumerable.sol
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: contracts\token\ERC721\IERC721Receiver.sol
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// File: contracts\introspection\ERC165.sol
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view override returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
// File: contracts\utils\EnumerableMap.sol
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
* supported.
*/
library EnumerableMap {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct MapEntry {
bytes32 _key;
bytes32 _value;
}
struct Map {
// Storage of map keys and values
MapEntry[] _entries;
// Position of the entry defined by a key in the `entries` array, plus 1
// because index 0 means a key is not in the map.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) { // Equivalent to !contains(map, key)
map._entries.push(MapEntry({ _key: key, _value: value }));
// The entry is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
map._indexes[key] = map._entries.length;
return true;
} else {
map._entries[keyIndex - 1]._value = value;
return false;
}
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function _remove(Map storage map, bytes32 key) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex != 0) { // Equivalent to contains(map, key)
// To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
// in the array, and then remove the last entry (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = keyIndex - 1;
uint256 lastIndex = map._entries.length - 1;
// When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
MapEntry storage lastEntry = map._entries[lastIndex];
// Move the last entry to the index where the entry to delete is
map._entries[toDeleteIndex] = lastEntry;
// Update the index for the moved entry
map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved entry was stored
map._entries.pop();
// Delete the index for the deleted slot
delete map._indexes[key];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function _contains(Map storage map, bytes32 key) private view returns (bool) {
return map._indexes[key] != 0;
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function _length(Map storage map) private view returns (uint256) {
return map._entries.length;
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
require(map._entries.length > index, "EnumerableMap: index out of bounds");
MapEntry storage entry = map._entries[index];
return (entry._key, entry._value);
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function _get(Map storage map, bytes32 key) private view returns (bytes32) {
return _get(map, key, "EnumerableMap: nonexistent key");
}
/**
* @dev Same as {_get}, with a custom error message when `key` is not in the map.
*/
function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
// UintToAddressMap
struct UintToAddressMap {
Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
return _set(map._inner, bytes32(key), bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return _remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return _contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return _length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = _at(map._inner, index);
return (uint256(key), address(uint256(value)));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint256(_get(map._inner, bytes32(key))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*/
function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
return address(uint256(_get(map._inner, bytes32(key), errorMessage)));
}
}
// File: contracts\utils\Strings.sol
/**
* @dev String operations.
*/
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
uint256 index = digits - 1;
temp = value;
while (temp != 0) {
buffer[index--] = byte(uint8(48 + temp % 10));
temp /= 10;
}
return string(buffer);
}
}
// File: contracts\token\ERC721\ERC721.sol
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://eips.ethereum.org/EIPS/eip-721
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using SafeMath for uint256;
using Address for address;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableMap for EnumerableMap.UintToAddressMap;
using Strings for uint256;
mapping (address => bool) public whitelists;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// mapping (address => bool) public whitelists;
// Mapping from holder address to their (enumerable) set of owned tokens
mapping (address => EnumerableSet.UintSet) private _holderTokens;
// Enumerable mapping from token ids to their owners
EnumerableMap.UintToAddressMap private _tokenOwners;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Optional mapping for token URIs
mapping (uint256 => string) private _tokenURIs;
// Base URI
string private _baseURI;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _holderTokens[owner].length();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
// If there is no base URI, return the token URI.
if (bytes(_baseURI).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(_baseURI, _tokenURI));
}
// If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
return string(abi.encodePacked(_baseURI, tokenId.toString(), ".json"));
}
/**
* @dev Returns the base URI set via {_setBaseURI}. This will be
* automatically added as a prefix in {tokenURI} to each token's URI, or
* to the token ID if no specific URI is set for that token ID.
*/
function baseURI() public view returns (string memory) {
return _baseURI;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
return _holderTokens[owner].at(index);
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
// _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
return _tokenOwners.length();
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
(uint256 tokenId, ) = _tokenOwners.at(index);
return tokenId;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
uint256 albumSize = totalSupply();
for(uint256 i = 0; i < albumSize; i++){
_transfer(from, to, i);
}
// _transfer(from, to, 0);
// _transfer(from, to, 1);
// _transfer(from, to, 2);
//_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
//_safeTransfer(from, to, 0, _data);
//_safeTransfer(from, to, 1, _data);
//_safeTransfer(from, to, 2, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _tokenOwners.contains(tokenId);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
d*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
_holderTokens[owner].remove(tokenId);
_tokenOwners.remove(tokenId);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_holderTokens[from].remove(tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(from, to, tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI},
* or to the token ID if {tokenURI} is empty.
*/
function _setBaseURI(string memory baseURI_) internal virtual {
_baseURI = baseURI_;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (!to.isContract()) {
return true;
}
bytes memory returndata = to.functionCall(abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
), "ERC721: transfer to non ERC721Receiver implementer");
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
function _approve(address to, uint256 tokenId) private {
_tokenApprovals[tokenId] = to;
emit Approval(ownerOf(tokenId), to, tokenId);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// File: contracts\token\ERC721\ERC721Burnable.sol
/**
* @title ERC721 Burnable Token
* @dev ERC721 Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721Burnable is Context, ERC721 {
/**
* @dev Burns `tokenId`. See {ERC721-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
_burn(tokenId);
}
}
// File: contracts\utils\Pausable.sol
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor () internal {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!_paused, "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(_paused, "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// File: contracts\token\ERC721\ERC721Pausable.sol
/**
* @dev ERC721 token with pausable token transfers, minting and burning.
*
* Useful for scenarios such as preventing trades until the end of an evaluation
* period, or having an emergency switch for freezing all token transfers in the
* event of a large bug.
*/
abstract contract ERC721Pausable is ERC721, Pausable {
/**
* @dev See {ERC721-_beforeTokenTransfer}.
*
* Requirements:
*
* - the contract must not be paused.
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
require(!paused(), "ERC721Pausable: token transfer while paused");
}
}
// File: contracts\presets\NonFungibleToken.sol
/**
* @dev {ERC721} token, including:
*
* - ability for holders to burn (destroy) their tokens
* - a minter role that allows for token minting (creation)
* - a pauser role that allows to stop all token transfers
* - token ID and URI autogeneration
*
* This contract uses {AccessControl} to lock permissioned functions using the
* different roles - head to its documentation for details.
*
* The account that deploys the contract will be granted the minter and pauser
* roles, as well as the default admin role, which will let it grant both minter
* and pauser roles to other accounts.
*/
contract NonFungibleToken is Context, AccessControl, ERC721Burnable, ERC721Pausable {
using Counters for Counters.Counter;
bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");
address public owner;
bool public whitelistingEnabled = false;
bool public mintingEnabled = true;
uint256 public maxPerWallet = 100;
uint256 public premintRound = 0;
uint256 public nftPerCall = 50;
// mapping (address => bool) public whitelists;
Counters.Counter private _tokenIdTracker;
/**
* @dev Grants `DEFAULT_ADMIN_ROLE`, `MINTER_ROLE` and `PAUSER_ROLE` to the
* account that deploys the contract.
*
* Token URIs will be autogenerated based on `baseURI` and their token IDs.
* See {ERC721-tokenURI}.
*/
constructor(string memory name, string memory symbol, string memory baseURI) public ERC721(name, symbol) {
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(MINTER_ROLE, _msgSender());
_setupRole(PAUSER_ROLE, _msgSender());
_setBaseURI(baseURI);
owner = msg.sender;
}
/* function toggleWhitelisting(bool _toggle) public virtual {
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "NonFungibleToken: must have admin role");
whitelistingEnabled = _toggle;
}*/
function mintOwner() public virtual {
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "NonFungibleToken: must have minter role to mint");
require(premintRound < 3, "All treasury NFTs have been minted");
for(uint i = 0; i < nftPerCall; i++){
_mint(msg.sender, _tokenIdTracker.current() +1);
_tokenIdTracker.increment();
}
premintRound = premintRound + 1;
}
function setURI(string memory baseURI) public virtual {
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "NonFungibleToken: must have admin role");
_setBaseURI(baseURI);
}
function setMaxPerWallet(uint256 _maxPerWallet) public virtual {
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "NonFungibleToken: must have minter role to mint");
maxPerWallet = _maxPerWallet;
}
function setOwner(address _owner) public virtual {
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "NonFungibleToken: must have admin role to mint");
owner = _owner;
}
function toggleMinting(bool _bool) public virtual {
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "NonFungibleToken: must have admin role to mint");
mintingEnabled = _bool;
}
function toggleWhitelisting(bool _toggle) public virtual {
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "NonFungibleToken: must have admin role");
whitelistingEnabled = _toggle;
}
function whitelist(address _account) public virtual {
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "NonFungibleToken: must have admin role");
whitelists[_account] = true;
}
function contractURI() public view returns (string memory) {
return string(abi.encodePacked(baseURI(), "contract-metadata.json"));
}
/**
* @dev Creates a new token for `to`. Its token ID will be automatically
* assigned (and available on the emitted {IERC721-Transfer} event), and the token
* URI autogenerated based on the base URI passed at construction.
*
* See {ERC721-_mint}.
*
* Requirements:
*
* - the caller must have the `MINTER_ROLE`.
*/
function mint(address to) public virtual {
require(hasRole(MINTER_ROLE, _msgSender()), "NonFungibleToken: must have minter role to mint");
require(whitelists[to] || ! whitelistingEnabled, "User not whitelisted !");
require(mintingEnabled, "Minting not enabled !");
// We cannot just use balanceOf to create the new tokenId because tokens
// can be burned (destroyed), so we need a separate counter.
_mint(to, _tokenIdTracker.current() + 1);
_tokenIdTracker.increment();
require(balanceOf(to) <= maxPerWallet, "Max NFTs reached by wallet");
}
/**
* @dev Pauses all token transfers.
*
* See {ERC721Pausable} and {Pausable-_pause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function pause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "NonFungibleToken: must have pauser role to pause");
_pause();
}
/**
* @dev Unpauses all token transfers.
*
* See {ERC721Pausable} and {Pausable-_unpause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function unpause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "NonFungibleToken: must have pauser role to unpause");
_unpause();
}
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override(ERC721, ERC721Pausable) {
super._beforeTokenTransfer(from, to, tokenId);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2184,
1011,
6185,
1008,
1013,
1013,
1013,
5371,
1024,
8311,
1032,
21183,
12146,
1032,
4372,
17897,
16670,
13462,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3075,
2005,
6605,
1008,
16770,
1024,
1013,
1013,
4372,
1012,
16948,
1012,
8917,
1013,
15536,
3211,
1013,
2275,
1035,
1006,
10061,
1035,
2951,
1035,
2828,
1007,
1031,
4520,
1033,
1997,
10968,
1008,
4127,
1012,
1008,
1008,
4520,
2031,
1996,
2206,
5144,
1024,
1008,
1008,
1011,
3787,
2024,
2794,
1010,
3718,
1010,
1998,
7039,
2005,
4598,
1999,
5377,
2051,
1008,
1006,
1051,
1006,
1015,
1007,
1007,
1012,
1008,
1011,
3787,
2024,
4372,
17897,
9250,
1999,
1051,
1006,
1050,
1007,
1012,
2053,
21586,
2024,
2081,
2006,
1996,
13063,
1012,
1008,
1008,
1036,
1036,
1036,
1008,
3206,
2742,
1063,
1008,
1013,
1013,
5587,
1996,
3075,
4725,
1008,
2478,
4372,
17897,
16670,
13462,
2005,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
1025,
1008,
1008,
1013,
1013,
13520,
1037,
2275,
2110,
8023,
1008,
4372,
17897,
16670,
13462,
1012,
4769,
13462,
2797,
2026,
13462,
1025,
1008,
1065,
1008,
1036,
1036,
1036,
1008,
1008,
2004,
1997,
1058,
2509,
1012,
1014,
1012,
1014,
1010,
2069,
4520,
1997,
2828,
1036,
4769,
1036,
1006,
1036,
4769,
13462,
1036,
1007,
1998,
1036,
21318,
3372,
17788,
2575,
1036,
1008,
1006,
1036,
21318,
7666,
3388,
1036,
1007,
2024,
3569,
1012,
1008,
1013,
3075,
4372,
17897,
16670,
13462,
1063,
1013,
1013,
2000,
10408,
2023,
3075,
2005,
3674,
4127,
2007,
2004,
2210,
3642,
1013,
1013,
23318,
2004,
2825,
1010,
2057,
4339,
2009,
1999,
3408,
1997,
1037,
12391,
2275,
2828,
2007,
1013,
1013,
27507,
16703,
5300,
1012,
1013,
1013,
1996,
2275,
7375,
3594,
2797,
4972,
1010,
1998,
5310,
1011,
5307,
1013,
1013,
24977,
1006,
2107,
2004,
4769,
13462,
1007,
2024,
2074,
10236,
7347,
2105,
1996,
1013,
1013,
10318,
2275,
1012,
1013,
1013,
2023,
2965,
2008,
2057,
2064,
2069,
3443,
2047,
4372,
17897,
16670,
13462,
2015,
2005,
4127,
2008,
4906,
1013,
1013,
1999,
27507,
16703,
1012,
2358,
6820,
6593,
2275,
1063,
1013,
1013,
5527,
1997,
2275,
5300,
27507,
16703,
1031,
1033,
1035,
5300,
1025,
1013,
1013,
2597,
1997,
1996,
3643,
1999,
1996,
1036,
5300,
1036,
9140,
1010,
4606,
1015,
2138,
5950,
1014,
1013,
1013,
2965,
1037,
3643,
2003,
2025,
1999,
1996,
2275,
1012,
12375,
1006,
27507,
16703,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1035,
5950,
2229,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5587,
1037,
3643,
2000,
1037,
2275,
1012,
1051,
1006,
1015,
1007,
1012,
1008,
1008,
5651,
2995,
2065,
1996,
3643,
2001,
2794,
2000,
1996,
2275,
1010,
2008,
2003,
2065,
2009,
2001,
2025,
1008,
2525,
2556,
1012,
1008,
1013,
3853,
1035,
5587,
1006,
2275,
5527,
2275,
1010,
27507,
16703,
3643,
1007,
2797,
5651,
1006,
22017,
2140,
1007,
1063,
2065,
1006,
999,
1035,
3397,
1006,
2275,
1010,
3643,
1007,
1007,
1063,
2275,
1012,
1035,
5300,
1012,
5245,
1006,
3643,
1007,
1025,
1013,
1013,
1996,
3643,
2003,
8250,
2012,
3091,
1011,
1015,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-03-27
*/
/**
*Submitted for verification at Etherscan.io on 2018-09-02
*/
pragma solidity ^0.4.24;
contract ERC721Basic {
event Transfer(address indexed _from, address indexed _to, uint256 _tokenId);
event Approval(address indexed _owner, address indexed _approved, uint256 _tokenId);
event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);
function balanceOf(address _owner) public view returns (uint256 _balance);
function ownerOf(uint256 _tokenId) public view returns (address _owner);
function exists(uint256 _tokenId) public view returns (bool _exists);
function approve(address _to, uint256 _tokenId) public;
function getApproved(uint256 _tokenId) public view returns (address _operator);
function setApprovalForAll(address _operator, bool _approved) public;
function isApprovedForAll(address _owner, address _operator) public view returns (bool);
function transferFrom(address _from, address _to, uint256 _tokenId) public;
function safeTransferFrom(address _from, address _to, uint256 _tokenId) public;
// function safeTransferFrom(
// address _from,
// address _to,
// uint256 _tokenId,
// bytes _data
// )
// public;
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721Enumerable is ERC721Basic {
function totalSupply() public view returns (uint256);
function tokenOfOwnerByIndex(address _owner, uint256 _index) public view returns (uint256 _tokenId);
function tokenByIndex(uint256 _index) public view returns (uint256);
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721Metadata is ERC721Basic {
function name() public view returns (string _name);
function symbol() public view returns (string _symbol);
function tokenURI(uint256 _tokenId) public view returns (string);
}
/**
* @title ERC-721 Non-Fungible Token Standard, full implementation interface
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721 is ERC721Basic, ERC721Enumerable, ERC721Metadata {
}
contract ToonInterface is ERC721 {
function isToonInterface() external pure returns (bool);
/**
* @notice Returns an address of the toon author. 0x0 if
* the toon has been created by us.
*/
function authorAddress() external view returns (address);
/**
* @notice Returns maximum supply. In other words there will
* be never more toons that that number. It has to
* be constant.
* If there is no limit function returns 0.
*/
function maxSupply() external view returns (uint256);
function getToonInfo(uint _id) external view returns (
uint genes,
uint birthTime,
address owner
);
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev modifier to allow actions only when the contract IS paused
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev modifier to allow actions only when the contract IS NOT paused
*/
modifier whenPaused {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() public onlyOwner whenNotPaused returns (bool) {
paused = true;
emit Pause();
return true;
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() public onlyOwner whenPaused returns (bool) {
paused = false;
emit Unpause();
return true;
}
}
contract Withdrawable {
mapping(address => uint) private pendingWithdrawals;
event Withdrawal(address indexed receiver, uint amount);
event BalanceChanged(address indexed _address, uint oldBalance, uint newBalance);
/**
* Returns amount of wei that given address is able to withdraw.
*/
function getPendingWithdrawal(address _address) public view returns (uint) {
return pendingWithdrawals[_address];
}
/**
* Add pending withdrawal for an address.
*/
function addPendingWithdrawal(address _address, uint _amount) internal {
require(_address != 0x0);
uint oldBalance = pendingWithdrawals[_address];
pendingWithdrawals[_address] += _amount;
emit BalanceChanged(_address, oldBalance, oldBalance + _amount);
}
/**
* Withdraws all pending withdrawals.
*/
function withdraw() external {
uint amount = getPendingWithdrawal(msg.sender);
require(amount > 0);
pendingWithdrawals[msg.sender] = 0;
msg.sender.transfer(amount);
emit Withdrawal(msg.sender, amount);
emit BalanceChanged(msg.sender, amount, 0);
}
}
contract ClockAuctionBase is Withdrawable, Pausable {
// Represents an auction on an NFT
struct Auction {
// Address of a contract
address _contract;
// Current owner of NFT
address seller;
// Price (in wei) at beginning of auction
uint128 startingPrice;
// Price (in wei) at end of auction
uint128 endingPrice;
// Duration (in seconds) of auction
uint64 duration;
// Time when auction started
// NOTE: 0 if this auction has been concluded
uint64 startedAt;
}
// Reference to contract tracking NFT ownership
ToonInterface[] public toonContracts;
mapping(address => uint256) addressToIndex;
// Cut owner takes on each auction, measured in basis points (1/100 of a percent).
// Values 0-10,000 map to 0%-100%
uint256 public ownerCut;
// Values 0-10,000 map to 0%-100%
// Author's share from the owner cut.
uint256 public authorShare;
// Map from token ID to their corresponding auction.
// mapping(uint256 => Auction) tokenIdToAuction;
mapping(address => mapping(uint256 => Auction)) tokenToAuction;
event AuctionCreated(address indexed _contract, uint256 indexed tokenId,
uint256 startingPrice, uint256 endingPrice, uint256 duration);
event AuctionSuccessful(address indexed _contract, uint256 indexed tokenId,
uint256 totalPrice, address indexed winner);
event AuctionCancelled(address indexed _contract, uint256 indexed tokenId);
/**
* @notice Adds a new toon contract.
*/
function addToonContract(address _toonContractAddress) external onlyOwner {
ToonInterface _interface = ToonInterface(_toonContractAddress);
require(_interface.isToonInterface());
uint _index = toonContracts.push(_interface) - 1;
addressToIndex[_toonContractAddress] = _index;
}
/// @dev Returns true if the claimant owns the token.
/// @param _contract - address of a toon contract
/// @param _claimant - Address claiming to own the token.
/// @param _tokenId - ID of token whose ownership to verify.
function _owns(address _contract, address _claimant, uint256 _tokenId)
internal
view
returns (bool) {
ToonInterface _interface = _interfaceByAddress(_contract);
address _owner = _interface.ownerOf(_tokenId);
return (_owner == _claimant);
}
/// @dev Escrows the NFT, assigning ownership to this contract.
/// Throws if the escrow fails.
/// @param _owner - Current owner address of token to escrow.
/// @param _tokenId - ID of token whose approval to verify.
function _escrow(address _contract, address _owner, uint256 _tokenId) internal {
ToonInterface _interface = _interfaceByAddress(_contract);
// it will throw if transfer fails
_interface.transferFrom(_owner, this, _tokenId);
}
/// @dev Transfers an NFT owned by this contract to another address.
/// Returns true if the transfer succeeds.
/// @param _receiver - Address to transfer NFT to.
/// @param _tokenId - ID of token to transfer.
function _transfer(address _contract, address _receiver, uint256 _tokenId) internal {
ToonInterface _interface = _interfaceByAddress(_contract);
// it will throw if transfer fails
_interface.transferFrom(this, _receiver, _tokenId);
}
/// @dev Adds an auction to the list of open auctions. Also fires the
/// AuctionCreated event.
/// @param _tokenId The ID of the token to be put on auction.
/// @param _auction Auction to add.
function _addAuction(address _contract, uint256 _tokenId, Auction _auction) internal {
// Require that all auctions have a duration of
// at least one minute. (Keeps our math from getting hairy!)
require(_auction.duration >= 1 minutes);
_isAddressSupportedContract(_contract);
tokenToAuction[_contract][_tokenId] = _auction;
emit AuctionCreated(
_contract,
uint256(_tokenId),
uint256(_auction.startingPrice),
uint256(_auction.endingPrice),
uint256(_auction.duration)
);
}
/// @dev Cancels an auction unconditionally.
function _cancelAuction(address _contract, uint256 _tokenId, address _seller) internal {
_removeAuction(_contract, _tokenId);
_transfer(_contract, _seller, _tokenId);
emit AuctionCancelled(_contract, _tokenId);
}
/// @dev Computes the price and transfers winnings.
/// Does NOT transfer ownership of token.
function _bid(address _contract, uint256 _tokenId, uint256 _bidAmount)
internal
returns (uint256)
{
// Get a reference to the auction struct
Auction storage auction = tokenToAuction[_contract][_tokenId];
ToonInterface _interface = _interfaceByAddress(auction._contract);
// Explicitly check that this auction is currently live.
// (Because of how Ethereum mappings work, we can't just count
// on the lookup above failing. An invalid _tokenId will just
// return an auction object that is all zeros.)
require(_isOnAuction(auction));
// Check that the bid is greater than or equal to the current price
uint256 price = _currentPrice(auction);
require(_bidAmount >= price);
// Grab a reference to the seller before the auction struct
// gets deleted.
address seller = auction.seller;
// The bid is good! Remove the auction before sending the fees
// to the sender so we can't have a reentrancy attack.
_removeAuction(_contract, _tokenId);
// Transfer proceeds to seller (if there are any!)
if (price > 0) {
// Calculate the auctioneer's cut.
// (NOTE: _computeCut() is guaranteed to return a
// value <= price, so this subtraction can't go negative.)
uint256 auctioneerCut;
uint256 authorCut;
uint256 sellerProceeds;
(auctioneerCut, authorCut, sellerProceeds) = _computeCut(_interface, price);
if (authorCut > 0) {
address authorAddress = _interface.authorAddress();
addPendingWithdrawal(authorAddress, authorCut);
}
addPendingWithdrawal(owner, auctioneerCut);
// NOTE: Doing a transfer() in the middle of a complex
// method like this is generally discouraged because of
// reentrancy attacks and DoS attacks if the seller is
// a contract with an invalid fallback function. We explicitly
// guard against reentrancy attacks by removing the auction
// before calling transfer(), and the only thing the seller
// can DoS is the sale of their own asset! (And if it's an
// accident, they can call cancelAuction(). )
seller.transfer(sellerProceeds);
}
// Calculate any excess funds included with the bid. If the excess
// is anything worth worrying about, transfer it back to bidder.
// NOTE: We checked above that the bid amount is greater than or
// equal to the price so this cannot underflow.
uint256 bidExcess = _bidAmount - price;
// Return the funds. Similar to the previous transfer, this is
// not susceptible to a re-entry attack because the auction is
// removed before any transfers occur.
msg.sender.transfer(bidExcess);
// Tell the world!
emit AuctionSuccessful(_contract, _tokenId, price, msg.sender);
return price;
}
/// @dev Removes an auction from the list of open auctions.
/// @param _tokenId - ID of NFT on auction.
function _removeAuction(address _contract, uint256 _tokenId) internal {
delete tokenToAuction[_contract][_tokenId];
}
/// @dev Returns true if the NFT is on auction.
/// @param _auction - Auction to check.
function _isOnAuction(Auction storage _auction) internal view returns (bool) {
return (_auction.startedAt > 0);
}
/// @dev Returns current price of an NFT on auction. Broken into two
/// functions (this one, that computes the duration from the auction
/// structure, and the other that does the price computation) so we
/// can easily test that the price computation works correctly.
function _currentPrice(Auction storage _auction)
internal
view
returns (uint256)
{
uint256 secondsPassed = 0;
// A bit of insurance against negative values (or wraparound).
// Probably not necessary (since Ethereum guarnatees that the
// now variable doesn't ever go backwards).
if (now > _auction.startedAt) {
secondsPassed = now - _auction.startedAt;
}
return _computeCurrentPrice(
_auction.startingPrice,
_auction.endingPrice,
_auction.duration,
secondsPassed
);
}
/// @dev Computes the current price of an auction. Factored out
/// from _currentPrice so we can run extensive unit tests.
/// When testing, make this function public and turn on
/// `Current price computation` test suite.
function _computeCurrentPrice(
uint256 _startingPrice,
uint256 _endingPrice,
uint256 _duration,
uint256 _secondsPassed
)
internal
pure
returns (uint256)
{
// NOTE: We don't use SafeMath (or similar) in this function because
// all of our public functions carefully cap the maximum values for
// time (at 64-bits) and currency (at 128-bits). _duration is
// also known to be non-zero (see the require() statement in
// _addAuction())
if (_secondsPassed >= _duration) {
// We've reached the end of the dynamic pricing portion
// of the auction, just return the end price.
return _endingPrice;
} else {
// Starting price can be higher than ending price (and often is!), so
// this delta can be negative.
int256 totalPriceChange = int256(_endingPrice) - int256(_startingPrice);
// This multiplication can't overflow, _secondsPassed will easily fit within
// 64-bits, and totalPriceChange will easily fit within 128-bits, their product
// will always fit within 256-bits.
int256 currentPriceChange = totalPriceChange * int256(_secondsPassed) / int256(_duration);
// currentPriceChange can be negative, but if so, will have a magnitude
// less that _startingPrice. Thus, this result will always end up positive.
int256 currentPrice = int256(_startingPrice) + currentPriceChange;
return uint256(currentPrice);
}
}
/// @dev Computes owner's cut of a sale.
/// @param _price - Sale price of NFT.
function _computeCut(ToonInterface _interface, uint256 _price) internal view returns (
uint256 ownerCutValue,
uint256 authorCutValue,
uint256 sellerProceeds
) {
// NOTE: We don't use SafeMath (or similar) in this function because
// all of our entry functions carefully cap the maximum values for
// currency (at 128-bits), and ownerCut <= 10000 (see the require()
// statement in the ClockAuction constructor). The result of this
// function is always guaranteed to be <= _price.
uint256 _totalCut = _price * ownerCut / 10000;
uint256 _authorCut = 0;
uint256 _ownerCut = 0;
if (_interface.authorAddress() != 0x0) {
_authorCut = _totalCut * authorShare / 10000;
}
_ownerCut = _totalCut - _authorCut;
uint256 _sellerProfit = _price - _ownerCut - _authorCut;
require(_sellerProfit + _ownerCut + _authorCut == _price);
return (_ownerCut, _authorCut, _sellerProfit);
}
function _interfaceByAddress(address _address) internal view returns (ToonInterface) {
uint _index = addressToIndex[_address];
ToonInterface _interface = toonContracts[_index];
require(_address == address(_interface));
return _interface;
}
function _isAddressSupportedContract(address _address) internal view returns (bool) {
uint _index = addressToIndex[_address];
ToonInterface _interface = toonContracts[_index];
return _address == address(_interface);
}
}
contract ClockAuction is ClockAuctionBase {
/// @dev The ERC-165 interface signature for ERC-721.
/// Ref: https://github.com/ethereum/EIPs/issues/165
/// Ref: https://github.com/ethereum/EIPs/issues/721
bytes4 constant InterfaceSignature_ERC721 = bytes4(0x9a20483d);
bool public isSaleClockAuction = true;
/// @dev Constructor creates a reference to the NFT ownership contract
/// and verifies the owner cut is in the valid range.
/// @param _ownerCut - percent cut the owner takes on each auction, must be
/// between 0-10,000.
/// @param _authorShare - percent share of the author of the toon.
/// Calculated from the ownerCut
constructor(uint256 _ownerCut, uint256 _authorShare) public {
require(_ownerCut <= 10000);
require(_authorShare <= 10000);
ownerCut = _ownerCut;
authorShare = _authorShare;
}
/// @dev Creates and begins a new auction.
/// @param _tokenId - ID of token to auction, sender must be owner.
/// @param _startingPrice - Price of item (in wei) at beginning of auction.
/// @param _endingPrice - Price of item (in wei) at end of auction.
/// @param _duration - Length of time to move between starting
/// price and ending price (in seconds).
/// @param _seller - Seller, if not the message sender
function createAuction(
address _contract,
uint256 _tokenId,
uint256 _startingPrice,
uint256 _endingPrice,
uint256 _duration,
address _seller
)
external
whenNotPaused
{
require(_isAddressSupportedContract(_contract));
// Sanity check that no inputs overflow how many bits we've allocated
// to store them in the auction struct.
require(_startingPrice == uint256(uint128(_startingPrice)));
require(_endingPrice == uint256(uint128(_endingPrice)));
require(_duration == uint256(uint64(_duration)));
_escrow(_contract, _seller, _tokenId);
Auction memory auction = Auction(
_contract,
_seller,
uint128(_startingPrice),
uint128(_endingPrice),
uint64(_duration),
uint64(now)
);
_addAuction(_contract, _tokenId, auction);
}
/// @dev Bids on an open auction, completing the auction and transferring
/// ownership of the NFT if enough Ether is supplied.
/// @param _tokenId - ID of token to bid on.
function bid(address _contract, uint256 _tokenId)
external
payable
whenNotPaused
{
// _bid will throw if the bid or funds transfer fails
_bid(_contract, _tokenId, msg.value);
_transfer(_contract, msg.sender, _tokenId);
}
/// @dev Cancels an auction that hasn't been won yet.
/// Returns the NFT to original owner.
/// @notice This is a state-modifying function that can
/// be called while the contract is paused.
/// @param _tokenId - ID of token on auction
function cancelAuction(address _contract, uint256 _tokenId)
external
{
Auction storage auction = tokenToAuction[_contract][_tokenId];
require(_isOnAuction(auction));
address seller = auction.seller;
require(msg.sender == seller);
_cancelAuction(_contract, _tokenId, seller);
}
/// @dev Cancels an auction when the contract is paused.
/// Only the owner may do this, and NFTs are returned to
/// the seller. This should only be used in emergencies.
/// @param _tokenId - ID of the NFT on auction to cancel.
function cancelAuctionWhenPaused(address _contract, uint256 _tokenId)
whenPaused
onlyOwner
external
{
Auction storage auction = tokenToAuction[_contract][_tokenId];
require(_isOnAuction(auction));
_cancelAuction(_contract, _tokenId, auction.seller);
}
/// @dev Returns auction info for an NFT on auction.
/// @param _tokenId - ID of NFT on auction.
function getAuction(address _contract, uint256 _tokenId)
external
view
returns
(
address seller,
uint256 startingPrice,
uint256 endingPrice,
uint256 duration,
uint256 startedAt,
uint256 currentPrice
) {
Auction storage auction = tokenToAuction[_contract][_tokenId];
if (!_isOnAuction(auction)) {
return (0x0, 0, 0, 0, 0, 0);
}
return (
auction.seller,
auction.startingPrice,
auction.endingPrice,
auction.duration,
auction.startedAt,
getCurrentPrice(_contract, _tokenId)
);
}
/// @dev Returns the current price of an auction.
/// @param _tokenId - ID of the token price we are checking.
function getCurrentPrice(address _contract, uint256 _tokenId)
public
view
returns (uint256)
{
Auction storage auction = tokenToAuction[_contract][_tokenId];
require(_isOnAuction(auction));
return _currentPrice(auction);
}
}
contract AccessControl is Ownable {
// This facet controls access control for CryptoKitties. There are four roles managed here:
//
// - The CEO: The CEO can reassign other roles and change the addresses of our dependent smart
// contracts. It is also the only role that can unpause the smart contract. It is initially
// set to the address that created the smart contract in the KittyCore constructor.
//
// - The CFO: The CFO can withdraw funds from KittyCore and its auction contracts.
//
// - The COO: The COO can release gen0 kitties to auction, and mint promo cats.
//
// It should be noted that these roles are distinct without overlap in their access abilities, the
// abilities listed for each role above are exhaustive. In particular, while the CEO can assign any
// address to any role, the CEO address itself doesn't have the ability to act in those roles. This
// restriction is intentional so that we aren't tempted to use the CEO address frequently out of
// convenience. The less we use an address, the less likely it is that we somehow compromise the
// account.
// The addresses of the accounts (or contracts) that can execute actions within each roles.
address public ceoAddress;
address public cfoAddress;
address public cooAddress;
// @dev Keeps track whether the contract is paused. When that is true, most actions are blocked
bool public paused = false;
/// @dev Access modifier for CEO-only functionality
modifier onlyCEO() {
require(msg.sender == ceoAddress);
_;
}
/// @dev Access modifier for CFO-only functionality
modifier onlyCFO() {
require(msg.sender == cfoAddress);
_;
}
/// @dev Access modifier for COO-only functionality
modifier onlyCOO() {
require(msg.sender == cooAddress);
_;
}
modifier onlyCLevel() {
require(
msg.sender == cooAddress ||
msg.sender == ceoAddress ||
msg.sender == cfoAddress
);
_;
}
constructor() public {
ceoAddress = owner;
cfoAddress = owner;
cooAddress = owner;
}
/// @dev Assigns a new address to act as the CEO. Only available to the current CEO.
/// @param _newCEO The address of the new CEO
function setCEO(address _newCEO) external onlyCEO {
require(_newCEO != address(0));
ceoAddress = _newCEO;
}
/// @dev Assigns a new address to act as the CFO. Only available to the current CEO.
/// @param _newCFO The address of the new CFO
function setCFO(address _newCFO) external onlyCEO {
require(_newCFO != address(0));
cfoAddress = _newCFO;
}
/// @dev Assigns a new address to act as the COO. Only available to the current CEO.
/// @param _newCOO The address of the new COO
function setCOO(address _newCOO) external onlyCEO {
require(_newCOO != address(0));
cooAddress = _newCOO;
}
/*** Pausable functionality adapted from OpenZeppelin ***/
/// @dev Modifier to allow actions only when the contract IS NOT paused
modifier whenNotPaused() {
require(!paused);
_;
}
/// @dev Modifier to allow actions only when the contract IS paused
modifier whenPaused {
require(paused);
_;
}
/// @dev Called by any "C-level" role to pause the contract. Used only when
/// a bug or exploit is detected and we need to limit damage.
function pause() external onlyCLevel whenNotPaused {
paused = true;
}
/// @dev Unpauses the smart contract. Can only be called by the CEO, since
/// one reason we may pause the contract is when CFO or COO accounts are
/// compromised.
/// @notice This is public rather than external so it can be called by
/// derived contracts.
function unpause() public onlyCEO whenPaused {
// can't unpause if contract was upgraded
paused = false;
}
}
interface ERC165 {
/// @notice Query if a contract implements an interface
/// @param interfaceID The interface identifier, as specified in ERC-165
/// @dev Interface identification is specified in ERC-165. This function
/// uses less than 30,000 gas.
/// @return `true` if the contract implements `interfaceID` and
/// `interfaceID` is not 0xffffffff, `false` otherwise
function supportsInterface(bytes4 interfaceID) external view returns (bool);
}
contract ERC165MappingImplementation is ERC165 {
/// @dev You must not set element 0xffffffff to true
mapping(bytes4 => bool) internal supportedInterfaces;
constructor() internal {
supportedInterfaces[this.supportsInterface.selector] = true;
}
function supportsInterface(bytes4 interfaceID) external view returns (bool) {
return supportedInterfaces[interfaceID];
}
}
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
function toString(uint i) internal pure returns (string){
if (i == 0) return "0";
uint j = i;
uint length;
while (j != 0){
length++;
j /= 10;
}
bytes memory bstr = new bytes(length);
uint k = length - 1;
while (i != 0){
bstr[k--] = byte(48 + i % 10);
i /= 10;
}
return string(bstr);
}
}
library AddressUtils {
/**
* Returns whether the target address is a contract
* @dev This function will return false if invoked during the constructor of a contract,
* as the code is not actually created until after the constructor finishes.
* @param addr address to check
* @return whether the target address is a contract
*/
function isContract(address addr) internal view returns (bool) {
uint256 size;
// XXX Currently there is no better way to check if there is a contract in an address
// than to check the size of the code at that address.
// See https://ethereum.stackexchange.com/a/14016/36603
// for more details about how this works.
// TODO Check this again before the Serenity release, because all addresses will be
// contracts then.
assembly { size := extcodesize(addr) } // solium-disable-line security/no-inline-assembly
return size > 0;
}
}
contract ERC721Receiver {
/**
* @dev Magic value to be returned upon successful reception of an NFT
* Equals to `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`,
* which can be also obtained as `ERC721Receiver(0).onERC721Received.selector`
*/
bytes4 constant ERC721_RECEIVED = 0xf0b9e5ba;
/**
* @notice Handle the receipt of an NFT
* @dev The ERC721 smart contract calls this function on the recipient
* after a `safetransfer`. This function MAY throw to revert and reject the
* transfer. This function MUST use 50,000 gas or less. Return of other
* than the magic value MUST result in the transaction being reverted.
* Note: the contract address is always the message sender.
* @param _from The sending address
* @param _tokenId The NFT identifier which is being transfered
* @param _data Additional data with no specified format
* @return `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`
*/
function onERC721Received(address _from, uint256 _tokenId, bytes _data) public returns(bytes4);
}
contract ERC721BasicToken is ERC721Basic, ERC165MappingImplementation {
using SafeMath for uint256;
using AddressUtils for address;
// Equals to `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`
// which can be also obtained as `ERC721Receiver(0).onERC721Received.selector`
bytes4 constant ERC721_RECEIVED = 0xf0b9e5ba;
// Mapping from token ID to owner
mapping(uint256 => address) internal tokenOwner;
// Mapping from token ID to approved address
mapping(uint256 => address) internal tokenApprovals;
// Mapping from owner to number of owned token
mapping(address => uint256) internal ownedTokensCount;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) internal operatorApprovals;
/**
* @dev Guarantees msg.sender is owner of the given token
* @param _tokenId uint256 ID of the token to validate its ownership belongs to msg.sender
*/
modifier onlyOwnerOf(uint256 _tokenId) {
require(ownerOf(_tokenId) == msg.sender);
_;
}
constructor() public {
supportedInterfaces[0x80ac58cd] = true;
}
/**
* @dev Checks msg.sender can transfer a token, by being owner, approved, or operator
* @param _tokenId uint256 ID of the token to validate
*/
modifier canTransfer(uint256 _tokenId) {
require(isApprovedOrOwner(msg.sender, _tokenId));
_;
}
/**
* @dev Gets the balance of the specified address
* @param _owner address to query the balance of
* @return uint256 representing the amount owned by the passed address
*/
function balanceOf(address _owner) public view returns (uint256) {
require(_owner != address(0));
return ownedTokensCount[_owner];
}
/**
* @dev Gets the owner of the specified token ID
* @param _tokenId uint256 ID of the token to query the owner of
* @return owner address currently marked as the owner of the given token ID
*/
function ownerOf(uint256 _tokenId) public view returns (address) {
address owner = tokenOwner[_tokenId];
require(owner != address(0));
return owner;
}
/**
* @dev Returns whether the specified token exists
* @param _tokenId uint256 ID of the token to query the existence of
* @return whether the token exists
*/
function exists(uint256 _tokenId) public view returns (bool) {
address owner = tokenOwner[_tokenId];
return owner != address(0);
}
/**
* @dev Approves another address to transfer the given token ID
* @dev The zero address indicates there is no approved address.
* @dev There can only be one approved address per token at a given time.
* @dev Can only be called by the token owner or an approved operator.
* @param _to address to be approved for the given token ID
* @param _tokenId uint256 ID of the token to be approved
*/
function approve(address _to, uint256 _tokenId) public {
address owner = ownerOf(_tokenId);
require(_to != owner);
require(msg.sender == owner || isApprovedForAll(owner, msg.sender));
if (getApproved(_tokenId) != address(0) || _to != address(0)) {
tokenApprovals[_tokenId] = _to;
emit Approval(owner, _to, _tokenId);
}
}
/**
* @dev Gets the approved address for a token ID, or zero if no address set
* @param _tokenId uint256 ID of the token to query the approval of
* @return address currently approved for the given token ID
*/
function getApproved(uint256 _tokenId) public view returns (address) {
return tokenApprovals[_tokenId];
}
/**
* @dev Sets or unsets the approval of a given operator
* @dev An operator is allowed to transfer all tokens of the sender on their behalf
* @param _to operator address to set the approval
* @param _approved representing the status of the approval to be set
*/
function setApprovalForAll(address _to, bool _approved) public {
require(_to != msg.sender);
operatorApprovals[msg.sender][_to] = _approved;
emit ApprovalForAll(msg.sender, _to, _approved);
}
/**
* @dev Tells whether an operator is approved by a given owner
* @param _owner owner address which you want to query the approval of
* @param _operator operator address which you want to query the approval of
* @return bool whether the given operator is approved by the given owner
*/
function isApprovedForAll(address _owner, address _operator) public view returns (bool) {
return operatorApprovals[_owner][_operator];
}
/**
* @dev Transfers the ownership of a given token ID to another address
* @dev Usage of this method is discouraged, use `safeTransferFrom` whenever possible
* @dev Requires the msg sender to be the owner, approved, or operator
* @param _from current owner of the token
* @param _to address to receive the ownership of the given token ID
* @param _tokenId uint256 ID of the token to be transferred
*/
function transferFrom(address _from, address _to, uint256 _tokenId) public canTransfer(_tokenId) {
require(_from != address(0));
require(_to != address(0));
clearApproval(_from, _tokenId);
removeTokenFrom(_from, _tokenId);
addTokenTo(_to, _tokenId);
emit Transfer(_from, _to, _tokenId);
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* @dev If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* @dev Requires the msg sender to be the owner, approved, or operator
* @param _from current owner of the token
* @param _to address to receive the ownership of the given token ID
* @param _tokenId uint256 ID of the token to be transferred
*/
function safeTransferFrom(
address _from,
address _to,
uint256 _tokenId
)
public
canTransfer(_tokenId)
{
// solium-disable-next-line arg-overflow
safeTransferFrom(_from, _to, _tokenId, "");
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* @dev If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* @dev Requires the msg sender to be the owner, approved, or operator
* @param _from current owner of the token
* @param _to address to receive the ownership of the given token ID
* @param _tokenId uint256 ID of the token to be transferred
* @param _data bytes data to send along with a safe transfer check
*/
function safeTransferFrom(
address _from,
address _to,
uint256 _tokenId,
bytes _data
)
public
canTransfer(_tokenId)
{
transferFrom(_from, _to, _tokenId);
// solium-disable-next-line arg-overflow
require(checkAndCallSafeTransfer(_from, _to, _tokenId, _data));
}
/**
* @dev Returns whether the given spender can transfer a given token ID
* @param _spender address of the spender to query
* @param _tokenId uint256 ID of the token to be transferred
* @return bool whether the msg.sender is approved for the given token ID,
* is an operator of the owner, or is the owner of the token
*/
function isApprovedOrOwner(address _spender, uint256 _tokenId) internal view returns (bool) {
address owner = ownerOf(_tokenId);
return _spender == owner || getApproved(_tokenId) == _spender || isApprovedForAll(owner, _spender);
}
/**
* @dev Internal function to mint a new token
* @dev Reverts if the given token ID already exists
* @param _to The address that will own the minted token
* @param _tokenId uint256 ID of the token to be minted by the msg.sender
*/
function _mint(address _to, uint256 _tokenId) internal {
require(_to != address(0));
addTokenTo(_to, _tokenId);
emit Transfer(address(0), _to, _tokenId);
}
/**
* @dev Internal function to clear current approval of a given token ID
* @dev Reverts if the given address is not indeed the owner of the token
* @param _owner owner of the token
* @param _tokenId uint256 ID of the token to be transferred
*/
function clearApproval(address _owner, uint256 _tokenId) internal {
require(ownerOf(_tokenId) == _owner);
if (tokenApprovals[_tokenId] != address(0)) {
tokenApprovals[_tokenId] = address(0);
emit Approval(_owner, address(0), _tokenId);
}
}
/**
* @dev Internal function to add a token ID to the list of a given address
* @param _to address representing the new owner of the given token ID
* @param _tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function addTokenTo(address _to, uint256 _tokenId) internal {
require(tokenOwner[_tokenId] == address(0));
tokenOwner[_tokenId] = _to;
ownedTokensCount[_to] = ownedTokensCount[_to].add(1);
}
/**
* @dev Internal function to remove a token ID from the list of a given address
* @param _from address representing the previous owner of the given token ID
* @param _tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function removeTokenFrom(address _from, uint256 _tokenId) internal {
require(ownerOf(_tokenId) == _from);
ownedTokensCount[_from] = ownedTokensCount[_from].sub(1);
tokenOwner[_tokenId] = address(0);
}
/**
* @dev Internal function to invoke `onERC721Received` on a target address
* @dev The call is not executed if the target address is not a contract
* @param _from address representing the previous owner of the given token ID
* @param _to target address that will receive the tokens
* @param _tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return whether the call correctly returned the expected magic value
*/
function checkAndCallSafeTransfer(
address _from,
address _to,
uint256 _tokenId,
bytes _data
)
internal
returns (bool)
{
if (!_to.isContract()) {
return true;
}
bytes4 retval = ERC721Receiver(_to).onERC721Received(_from, _tokenId, _data);
return (retval == ERC721_RECEIVED);
}
}
contract ERC721Token is ERC721, ERC721BasicToken {
// Token name
string internal name_;
// Token symbol
string internal symbol_;
// Mapping from owner to list of owned token IDs
mapping(address => uint256[]) internal ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) internal ownedTokensIndex;
/**
* @dev Constructor function
*/
constructor(string _name, string _symbol) public {
supportedInterfaces[0x5b5e139f] = true; // ERC721Metadata
supportedInterfaces[0x780e9d63] = true; // ERC721Enumerable
name_ = _name;
symbol_ = _symbol;
}
/**
* @dev Gets the token name
* @return string representing the token name
*/
function name() public view returns (string) {
return name_;
}
/**
* @dev Gets the token symbol
* @return string representing the token symbol
*/
function symbol() public view returns (string) {
return symbol_;
}
/**
* @dev Returns an URI for a given token ID
* @dev Throws if the token ID does not exist. May return an empty string.
* @param _tokenId uint256 ID of the token to query
*/
function tokenURI(uint256 _tokenId) public view returns (string);
/**
* @dev Gets the token ID at a given index of the tokens list of the requested owner
* @param _owner address owning the tokens list to be accessed
* @param _index uint256 representing the index to be accessed of the requested tokens list
* @return uint256 token ID at the given index of the tokens list owned by the requested address
*/
function tokenOfOwnerByIndex(address _owner, uint256 _index) public view returns (uint256) {
require(_index < balanceOf(_owner));
return ownedTokens[_owner][_index];
}
/**
* @dev Gets the total amount of tokens stored by the contract
* @return uint256 representing the total amount of tokens
*/
function totalSupply() public view returns (uint256);
/**
* @dev Gets the token ID at a given index of all the tokens in this contract
* @dev Reverts if the index is greater or equal to the total number of tokens
* @param _index uint256 representing the index to be accessed of the tokens list
* @return uint256 token ID at the given index of the tokens list
*/
function tokenByIndex(uint256 _index) public view returns (uint256) {
require(_index < totalSupply());
//In our case id is an index and vice versa.
return _index;
}
/**
* @dev Internal function to add a token ID to the list of a given address
* @param _to address representing the new owner of the given token ID
* @param _tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function addTokenTo(address _to, uint256 _tokenId) internal {
super.addTokenTo(_to, _tokenId);
uint256 length = ownedTokens[_to].length;
ownedTokens[_to].push(_tokenId);
ownedTokensIndex[_tokenId] = length;
}
/**
* @dev Internal function to remove a token ID from the list of a given address
* @param _from address representing the previous owner of the given token ID
* @param _tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function removeTokenFrom(address _from, uint256 _tokenId) internal {
super.removeTokenFrom(_from, _tokenId);
uint256 tokenIndex = ownedTokensIndex[_tokenId];
uint256 lastTokenIndex = ownedTokens[_from].length.sub(1);
uint256 lastToken = ownedTokens[_from][lastTokenIndex];
ownedTokens[_from][tokenIndex] = lastToken;
ownedTokens[_from][lastTokenIndex] = 0;
// Note that this will handle single-element arrays. In that case, both tokenIndex and lastTokenIndex are going to
// be zero. Then we can make sure that we will remove _tokenId from the ownedTokens list since we are first swapping
// the lastToken to the first position, and then dropping the element placed in the last position of the list
ownedTokens[_from].length--;
ownedTokensIndex[_tokenId] = 0;
ownedTokensIndex[lastToken] = tokenIndex;
}
}
library StringUtils {
struct slice {
uint _len;
uint _ptr;
}
/*
* @dev Returns a slice containing the entire string.
* @param self The string to make a slice from.
* @return A newly allocated slice containing the entire string.
*/
function toSlice(string memory self) internal pure returns (slice memory) {
uint ptr;
assembly {
ptr := add(self, 0x20)
}
return slice(bytes(self).length, ptr);
}
/*
* @dev Returns a newly allocated string containing the concatenation of
* `self` and `other`.
* @param self The first slice to concatenate.
* @param other The second slice to concatenate.
* @return The concatenation of the two strings.
*/
function concat(slice memory self, slice memory other) internal pure returns (string memory) {
string memory ret = new string(self._len + other._len);
uint retptr;
assembly { retptr := add(ret, 32) }
memcpy(retptr, self._ptr, self._len);
memcpy(retptr + self._len, other._ptr, other._len);
return ret;
}
function memcpy(uint dest, uint src, uint len) private pure {
// Copy word-length chunks while possible
for(; len >= 32; len -= 32) {
assembly {
mstore(dest, mload(src))
}
dest += 32;
src += 32;
}
// Copy remaining bytes
uint mask = 256 ** (32 - len) - 1;
assembly {
let srcpart := and(mload(src), not(mask))
let destpart := and(mload(dest), mask)
mstore(dest, or(destpart, srcpart))
}
}
}
contract ToonBase is ERC721Token, AccessControl, ToonInterface {
using StringUtils for *;
using SafeMath for uint;
Toon[] private toons;
uint public maxSupply;
uint32 public maxPromoToons;
address public authorAddress;
string public endpoint = "https://mindhouse.io:3100/metadata/";
constructor(string _name, string _symbol, uint _maxSupply, uint32 _maxPromoToons, address _author)
public
ERC721Token(_name, _symbol) {
require(_maxPromoToons <= _maxSupply);
maxSupply = _maxSupply;
maxPromoToons = _maxPromoToons;
authorAddress = _author;
}
function maxSupply() external view returns (uint) {
return maxSupply;
}
/**
* @dev Gets the total amount of tokens stored by the contract
* @return uint256 representing the total amount of tokens
*/
function totalSupply() public view returns (uint256) {
return toons.length;
}
/**
* @dev Returns an URI for a given token ID
* @dev Throws if the token ID does not exist. May return an empty string.
* @param _tokenId uint256 ID of the token to query
*/
function tokenURI(uint256 _tokenId) public view returns (string) {
require(exists(_tokenId));
string memory slash = "/";
return endpoint.toSlice().concat(name_.toSlice()).toSlice().concat(slash.toSlice()).toSlice().concat(_tokenId.toString().toSlice());
}
function authorAddress() external view returns (address) {
return authorAddress;
}
function changeEndpoint(string newEndpoint) external onlyOwner {
endpoint = newEndpoint;
}
function isToonInterface() external pure returns (bool) {
return true;
}
function _getToon(uint _id) internal view returns (Toon){
require(_id <= totalSupply());
return toons[_id];
}
function _createToon(uint _genes, address _owner) internal {
require(totalSupply() < maxSupply);
Toon memory _toon = Toon(_genes, now);
uint id = toons.push(_toon) - 1;
_mint(_owner, id);
}
struct Toon {
uint256 genes;
uint256 birthTime;
}
}
library SafeMath32 {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint32 a, uint32 b) internal pure returns (uint32 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint32 a, uint32 b) internal pure returns (uint32) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint32 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint32 a, uint32 b) internal pure returns (uint32) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint32 a, uint32 b) internal pure returns (uint32 c) {
c = a + b;
assert(c >= a);
return c;
}
}
contract ToonMinting is ToonBase {
using SafeMath32 for uint32;
uint32 public promoToonsMinted = 0;
constructor(string _name, string _symbol, uint _maxSupply, uint32 _maxPromoToons, address _author)
public
ToonBase(_name, _symbol, _maxSupply, _maxPromoToons, _author) {
}
function createPromoToon(uint _genes, address _owner) external onlyCOO {
require(promoToonsMinted < maxPromoToons);
address _toonOwner = _owner;
if (_toonOwner == 0x0) {
_toonOwner = cooAddress;
}
_createToon(_genes, _toonOwner);
promoToonsMinted = promoToonsMinted.add(1);
}
}
contract ToonAuction is ToonMinting {
ClockAuction public saleAuction;
constructor(string _name, string _symbol, uint _maxSupply, uint32 _maxPromoToons, address _author)
public
ToonMinting(_name, _symbol, _maxSupply, _maxPromoToons, _author) {
}
function setSaleAuctionAddress(address _address) external onlyCEO {
ClockAuction candidateContract = ClockAuction(_address);
require(candidateContract.isSaleClockAuction());
// Set the new contract address
saleAuction = candidateContract;
}
function createSaleAuction(
uint256 _toonId,
uint256 _startingPrice,
uint256 _endingPrice,
uint256 _duration
)
external
whenNotPaused
{
// Auction contract checks input sizes
// If toon is already on any auction, this will throw
// because it will be owned by the auction contract.
require(ownerOf(_toonId) == msg.sender);
approve(saleAuction, _toonId);
// Sale auction throws if inputs are invalid and clears
// transfer approval after escrowing the toon.
saleAuction.createAuction(
this,
_toonId,
_startingPrice,
_endingPrice,
_duration,
msg.sender
);
}
}
contract CryptoToon is ToonAuction {
constructor(string _name, string _symbol, uint _maxSupply, uint32 _maxPromoToons, address _author)
public
ToonAuction(_name, _symbol, _maxSupply, _maxPromoToons, _author) {
}
function getToonInfo(uint _id) external view returns (
uint genes,
uint birthTime,
address owner
) {
Toon memory _toon = _getToon(_id);
return (_toon.genes, _toon.birthTime, ownerOf(_id));
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
2676,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
2760,
1011,
5641,
1011,
6185,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
3206,
9413,
2278,
2581,
17465,
22083,
2594,
1063,
2724,
4651,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
4844,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
1025,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
6872,
1010,
22017,
2140,
1035,
4844,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1035,
5703,
1007,
1025,
3853,
3954,
11253,
1006,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
3193,
5651,
1006,
4769,
1035,
3954,
1007,
1025,
3853,
6526,
1006,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1035,
6526,
1007,
1025,
3853,
14300,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
1025,
3853,
2131,
29098,
26251,
1006,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
3193,
5651,
1006,
4769,
1035,
6872,
1007,
1025,
3853,
2275,
29098,
12298,
2389,
29278,
8095,
1006,
4769,
1035,
6872,
1010,
22017,
2140,
1035,
4844,
1007,
2270,
1025,
3853,
18061,
9397,
26251,
29278,
8095,
1006,
4769,
1035,
3954,
1010,
4769,
1035,
6872,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
1025,
3853,
3647,
6494,
3619,
7512,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
2270,
1025,
1013,
1013,
3853,
3647,
6494,
3619,
7512,
19699,
5358,
1006,
1013,
1013,
4769,
1035,
2013,
1010,
1013,
1013,
4769,
1035,
2000,
1010,
1013,
1013,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1010,
1013,
1013,
27507,
1035,
2951,
1013,
1013,
1007,
1013,
1013,
2270,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
9413,
2278,
1011,
5824,
2487,
2512,
1011,
15289,
3468,
19204,
3115,
1010,
11887,
4372,
17897,
8156,
5331,
1008,
1030,
16475,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
5824,
2487,
1012,
9108,
1008,
1013,
3206,
9413,
2278,
2581,
17465,
2368,
17897,
16670,
2003,
9413,
2278,
2581,
17465,
22083,
2594,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
19204,
11253,
12384,
2121,
3762,
22254,
10288,
1006,
4769,
1035,
3954,
1010,
21318,
3372,
17788,
2575,
1035,
5950,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1035,
19204,
3593,
1007,
1025,
3853,
19204,
3762,
22254,
10288,
1006,
21318,
3372,
17788,
2575,
1035,
5950,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-25
*/
// Verified using https://dapp.tools
// hevm: flattened sources of /nix/store/bb13ifarzsw14v135vsrs2xbv7zf3gmn-geb-safe-manager/dapp/geb-safe-manager/src/GebSafeManager.sol
pragma solidity =0.6.7;
////// /nix/store/bb13ifarzsw14v135vsrs2xbv7zf3gmn-geb-safe-manager/dapp/geb-safe-manager/src/GebSafeManager.sol
// Copyright (C) 2018-2020 Maker Ecosystem Growth Holdings, INC.
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU Affero General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Affero General Public License for more details.
//
// You should have received a copy of the GNU Affero General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
/* pragma solidity 0.6.7; */
abstract contract SAFEEngineLike_12 {
function safes(bytes32, address) virtual public view returns (uint, uint);
function approveSAFEModification(address) virtual public;
function transferCollateral(bytes32, address, address, uint) virtual public;
function transferInternalCoins(address, address, uint) virtual public;
function modifySAFECollateralization(bytes32, address, address, address, int, int) virtual public;
function transferSAFECollateralAndDebt(bytes32, address, address, int, int) virtual public;
}
abstract contract LiquidationEngineLike_3 {
function protectSAFE(bytes32, address, address) virtual external;
}
contract SAFEHandler {
constructor(address safeEngine) public {
SAFEEngineLike_12(safeEngine).approveSAFEModification(msg.sender);
}
}
contract GebSafeManager {
address public safeEngine;
uint public safei; // Auto incremental
mapping (uint => address) public safes; // SAFEId => SAFEHandler
mapping (uint => List) public safeList; // SAFEId => Prev & Next SAFEIds (double linked list)
mapping (uint => address) public ownsSAFE; // SAFEId => Owner
mapping (uint => bytes32) public collateralTypes; // SAFEId => CollateralType
mapping (address => uint) public firstSAFEID; // Owner => First SAFEId
mapping (address => uint) public lastSAFEID; // Owner => Last SAFEId
mapping (address => uint) public safeCount; // Owner => Amount of SAFEs
mapping (
address => mapping (
uint => mapping (
address => uint
)
)
) public safeCan; // Owner => SAFEId => Allowed Addr => True/False
mapping (
address => mapping (
address => uint
)
) public handlerCan; // SAFE handler => Allowed Addr => True/False
struct List {
uint prev;
uint next;
}
// --- Events ---
event AllowSAFE(
address sender,
uint safe,
address usr,
uint ok
);
event AllowHandler(
address sender,
address usr,
uint ok
);
event TransferSAFEOwnership(
address sender,
uint safe,
address dst
);
event OpenSAFE(address indexed sender, address indexed own, uint indexed safe);
event ModifySAFECollateralization(
address sender,
uint safe,
int deltaCollateral,
int deltaDebt
);
event TransferCollateral(
address sender,
uint safe,
address dst,
uint wad
);
event TransferCollateral(
address sender,
bytes32 collateralType,
uint safe,
address dst,
uint wad
);
event TransferInternalCoins(
address sender,
uint safe,
address dst,
uint rad
);
event QuitSystem(
address sender,
uint safe,
address dst
);
event EnterSystem(
address sender,
address src,
uint safe
);
event MoveSAFE(
address sender,
uint safeSrc,
uint safeDst
);
event ProtectSAFE(
address sender,
uint safe,
address liquidationEngine,
address saviour
);
modifier safeAllowed(
uint safe
) {
require(msg.sender == ownsSAFE[safe] || safeCan[ownsSAFE[safe]][safe][msg.sender] == 1, "safe-not-allowed");
_;
}
modifier handlerAllowed(
address handler
) {
require(
msg.sender == handler ||
handlerCan[handler][msg.sender] == 1,
"internal-system-safe-not-allowed"
);
_;
}
constructor(address safeEngine_) public {
safeEngine = safeEngine_;
}
// --- Math ---
function add(uint x, uint y) internal pure returns (uint z) {
require((z = x + y) >= x);
}
function sub(uint x, uint y) internal pure returns (uint z) {
require((z = x - y) <= x);
}
function toInt(uint x) internal pure returns (int y) {
y = int(x);
require(y >= 0);
}
// --- SAFE Manipulation ---
// Allow/disallow a usr address to manage the safe
function allowSAFE(
uint safe,
address usr,
uint ok
) public safeAllowed(safe) {
safeCan[ownsSAFE[safe]][safe][usr] = ok;
emit AllowSAFE(
msg.sender,
safe,
usr,
ok
);
}
// Allow/disallow a usr address to quit to the sender handler
function allowHandler(
address usr,
uint ok
) public {
handlerCan[msg.sender][usr] = ok;
emit AllowHandler(
msg.sender,
usr,
ok
);
}
// Open a new safe for a given usr address.
function openSAFE(
bytes32 collateralType,
address usr
) public returns (uint) {
require(usr != address(0), "usr-address-0");
safei = add(safei, 1);
safes[safei] = address(new SAFEHandler(safeEngine));
ownsSAFE[safei] = usr;
collateralTypes[safei] = collateralType;
// Add new SAFE to double linked list and pointers
if (firstSAFEID[usr] == 0) {
firstSAFEID[usr] = safei;
}
if (lastSAFEID[usr] != 0) {
safeList[safei].prev = lastSAFEID[usr];
safeList[lastSAFEID[usr]].next = safei;
}
lastSAFEID[usr] = safei;
safeCount[usr] = add(safeCount[usr], 1);
emit OpenSAFE(msg.sender, usr, safei);
return safei;
}
// Give the safe ownership to a dst address.
function transferSAFEOwnership(
uint safe,
address dst
) public safeAllowed(safe) {
require(dst != address(0), "dst-address-0");
require(dst != ownsSAFE[safe], "dst-already-owner");
// Remove transferred SAFE from double linked list of origin user and pointers
if (safeList[safe].prev != 0) {
safeList[safeList[safe].prev].next = safeList[safe].next; // Set the next pointer of the prev safe (if exists) to the next of the transferred one
}
if (safeList[safe].next != 0) { // If wasn't the last one
safeList[safeList[safe].next].prev = safeList[safe].prev; // Set the prev pointer of the next safe to the prev of the transferred one
} else { // If was the last one
lastSAFEID[ownsSAFE[safe]] = safeList[safe].prev; // Update last pointer of the owner
}
if (firstSAFEID[ownsSAFE[safe]] == safe) { // If was the first one
firstSAFEID[ownsSAFE[safe]] = safeList[safe].next; // Update first pointer of the owner
}
safeCount[ownsSAFE[safe]] = sub(safeCount[ownsSAFE[safe]], 1);
// Transfer ownership
ownsSAFE[safe] = dst;
// Add transferred SAFE to double linked list of destiny user and pointers
safeList[safe].prev = lastSAFEID[dst];
safeList[safe].next = 0;
if (lastSAFEID[dst] != 0) {
safeList[lastSAFEID[dst]].next = safe;
}
if (firstSAFEID[dst] == 0) {
firstSAFEID[dst] = safe;
}
lastSAFEID[dst] = safe;
safeCount[dst] = add(safeCount[dst], 1);
emit TransferSAFEOwnership(
msg.sender,
safe,
dst
);
}
// Modify a SAFE's collateralization ratio while keeping the generated COIN or collateral freed in the SAFE handler address.
function modifySAFECollateralization(
uint safe,
int deltaCollateral,
int deltaDebt
) public safeAllowed(safe) {
address safeHandler = safes[safe];
SAFEEngineLike_12(safeEngine).modifySAFECollateralization(
collateralTypes[safe],
safeHandler,
safeHandler,
safeHandler,
deltaCollateral,
deltaDebt
);
emit ModifySAFECollateralization(
msg.sender,
safe,
deltaCollateral,
deltaDebt
);
}
// Transfer wad amount of safe collateral from the safe address to a dst address.
function transferCollateral(
uint safe,
address dst,
uint wad
) public safeAllowed(safe) {
SAFEEngineLike_12(safeEngine).transferCollateral(collateralTypes[safe], safes[safe], dst, wad);
emit TransferCollateral(
msg.sender,
safe,
dst,
wad
);
}
// Transfer wad amount of any type of collateral (collateralType) from the safe address to a dst address.
// This function has the purpose to take away collateral from the system that doesn't correspond to the safe but was sent there wrongly.
function transferCollateral(
bytes32 collateralType,
uint safe,
address dst,
uint wad
) public safeAllowed(safe) {
SAFEEngineLike_12(safeEngine).transferCollateral(collateralType, safes[safe], dst, wad);
emit TransferCollateral(
msg.sender,
collateralType,
safe,
dst,
wad
);
}
// Transfer rad amount of COIN from the safe address to a dst address.
function transferInternalCoins(
uint safe,
address dst,
uint rad
) public safeAllowed(safe) {
SAFEEngineLike_12(safeEngine).transferInternalCoins(safes[safe], dst, rad);
emit TransferInternalCoins(
msg.sender,
safe,
dst,
rad
);
}
// Quit the system, migrating the safe (lockedCollateral, generatedDebt) to a different dst handler
function quitSystem(
uint safe,
address dst
) public safeAllowed(safe) handlerAllowed(dst) {
(uint lockedCollateral, uint generatedDebt) = SAFEEngineLike_12(safeEngine).safes(collateralTypes[safe], safes[safe]);
int deltaCollateral = toInt(lockedCollateral);
int deltaDebt = toInt(generatedDebt);
SAFEEngineLike_12(safeEngine).transferSAFECollateralAndDebt(
collateralTypes[safe],
safes[safe],
dst,
deltaCollateral,
deltaDebt
);
emit QuitSystem(
msg.sender,
safe,
dst
);
}
// Import a position from src handler to the handler owned by safe
function enterSystem(
address src,
uint safe
) public handlerAllowed(src) safeAllowed(safe) {
(uint lockedCollateral, uint generatedDebt) = SAFEEngineLike_12(safeEngine).safes(collateralTypes[safe], src);
int deltaCollateral = toInt(lockedCollateral);
int deltaDebt = toInt(generatedDebt);
SAFEEngineLike_12(safeEngine).transferSAFECollateralAndDebt(
collateralTypes[safe],
src,
safes[safe],
deltaCollateral,
deltaDebt
);
emit EnterSystem(
msg.sender,
src,
safe
);
}
// Move a position from safeSrc handler to the safeDst handler
function moveSAFE(
uint safeSrc,
uint safeDst
) public safeAllowed(safeSrc) safeAllowed(safeDst) {
require(collateralTypes[safeSrc] == collateralTypes[safeDst], "non-matching-safes");
(uint lockedCollateral, uint generatedDebt) = SAFEEngineLike_12(safeEngine).safes(collateralTypes[safeSrc], safes[safeSrc]);
int deltaCollateral = toInt(lockedCollateral);
int deltaDebt = toInt(generatedDebt);
SAFEEngineLike_12(safeEngine).transferSAFECollateralAndDebt(
collateralTypes[safeSrc],
safes[safeSrc],
safes[safeDst],
deltaCollateral,
deltaDebt
);
emit MoveSAFE(
msg.sender,
safeSrc,
safeDst
);
}
// Choose a SAFE saviour inside LiquidationEngine for the SAFE with id 'safe'
function protectSAFE(
uint safe,
address liquidationEngine,
address saviour
) public safeAllowed(safe) {
LiquidationEngineLike_3(liquidationEngine).protectSAFE(
collateralTypes[safe],
safes[safe],
saviour
);
emit ProtectSAFE(
msg.sender,
safe,
liquidationEngine,
saviour
);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2423,
1008,
1013,
1013,
1013,
20119,
2478,
16770,
1024,
1013,
1013,
4830,
9397,
1012,
5906,
1013,
1013,
2002,
2615,
2213,
1024,
16379,
4216,
1997,
1013,
23330,
1013,
3573,
1013,
22861,
17134,
10128,
2906,
2480,
26760,
16932,
2615,
17134,
2629,
15088,
2869,
2475,
2595,
2497,
2615,
2581,
2480,
2546,
2509,
21693,
2078,
1011,
16216,
2497,
1011,
3647,
1011,
3208,
1013,
4830,
9397,
1013,
16216,
2497,
1011,
3647,
1011,
3208,
1013,
5034,
2278,
1013,
16216,
5910,
10354,
16704,
17325,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1027,
1014,
1012,
1020,
1012,
1021,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
1013,
23330,
1013,
3573,
1013,
22861,
17134,
10128,
2906,
2480,
26760,
16932,
2615,
17134,
2629,
15088,
2869,
2475,
2595,
2497,
2615,
2581,
2480,
2546,
2509,
21693,
2078,
1011,
16216,
2497,
1011,
3647,
1011,
3208,
1013,
4830,
9397,
1013,
16216,
2497,
1011,
3647,
1011,
3208,
1013,
5034,
2278,
1013,
16216,
5910,
10354,
16704,
17325,
1012,
14017,
1013,
1013,
9385,
1006,
1039,
1007,
2760,
1011,
12609,
9338,
16927,
3930,
9583,
1010,
4297,
1012,
1013,
1013,
2023,
2565,
2003,
2489,
4007,
1024,
2017,
2064,
2417,
2923,
3089,
8569,
2618,
2009,
1998,
1013,
2030,
19933,
1013,
1013,
2009,
2104,
1996,
3408,
1997,
1996,
27004,
21358,
7512,
2080,
2236,
2270,
6105,
2004,
2405,
2011,
1013,
1013,
1996,
2489,
4007,
3192,
1010,
2593,
2544,
1017,
1997,
1996,
6105,
1010,
2030,
1013,
1013,
1006,
2012,
2115,
5724,
1007,
2151,
2101,
2544,
1012,
1013,
1013,
1013,
1013,
2023,
2565,
2003,
5500,
1999,
1996,
3246,
2008,
2009,
2097,
2022,
6179,
1010,
1013,
1013,
2021,
2302,
2151,
10943,
2100,
1025,
2302,
2130,
1996,
13339,
10943,
2100,
1997,
1013,
1013,
6432,
8010,
2030,
10516,
2005,
1037,
3327,
3800,
1012,
2156,
1996,
1013,
1013,
27004,
21358,
7512,
2080,
2236,
2270,
6105,
2005,
2062,
4751,
1012,
1013,
1013,
1013,
1013,
2017,
2323,
2031,
2363,
1037,
6100,
1997,
1996,
27004,
21358,
7512,
2080,
2236,
2270,
6105,
1013,
1013,
2247,
2007,
2023,
2565,
1012,
2065,
2025,
1010,
2156,
1026,
16770,
1024,
1013,
1013,
7479,
1012,
27004,
1012,
8917,
1013,
15943,
1013,
1028,
1012,
1013,
1008,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1021,
1025,
1008,
1013,
10061,
3206,
3647,
13159,
3170,
10359,
1035,
2260,
1063,
3853,
3647,
2015,
1006,
27507,
16703,
1010,
4769,
1007,
7484,
2270,
3193,
5651,
1006,
21318,
3372,
1010,
21318,
3372,
1007,
1025,
3853,
14300,
3736,
7959,
5302,
4305,
10803,
1006,
4769,
1007,
7484,
2270,
1025,
3853,
4651,
26895,
24932,
2389,
1006,
27507,
16703,
1010,
4769,
1010,
4769,
1010,
21318,
3372,
1007,
7484,
2270,
1025,
3853,
4651,
18447,
11795,
2389,
3597,
7076,
1006,
4769,
1010,
4769,
1010,
21318,
3372,
1007,
7484,
2270,
1025,
3853,
19933,
3736,
7959,
26895,
24932,
11475,
9276,
1006,
27507,
16703,
1010,
4769,
1010,
4769,
1010,
4769,
1010,
20014,
1010,
20014,
1007,
7484,
2270,
1025,
3853,
15210,
10354,
8586,
14511,
24932,
7911,
4859,
3207,
19279,
1006,
27507,
16703,
1010,
4769,
1010,
4769,
1010,
20014,
1010,
20014,
1007,
7484,
2270,
1025,
1065,
10061,
3206,
28763,
13159,
3170,
10359,
1035,
1017,
1063,
3853,
18227,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.18;
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
function max64(uint64 a, uint64 b) internal pure returns (uint64) {
return a >= b ? a : b;
}
function min64(uint64 a, uint64 b) internal pure returns (uint64) {
return a < b ? a : b;
}
function max256(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
function min256(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
}
contract Ownable {
address public owner;
function Ownable() public {
owner = msg.sender;
}
modifier onlyOwner() {
if (msg.sender != owner) {
revert();
}
_;
}
function transferOwnership(address newOwner) public onlyOwner {
if (newOwner != address(0)) {
owner = newOwner;
}
}
function destruct() public onlyOwner {
selfdestruct(owner);
}
}
contract ERC20Basic {
function balanceOf(address who) public constant returns (uint256);
function transfer(address to, uint256 value) public;
event Transfer(address indexed from, address indexed to, uint256 value);
}
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public constant returns (uint256);
function transferFrom(address from, address to, uint256 value) public;
function approve(address spender, uint256 value) public;
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 public totalSupply;
modifier onlyPayloadSize(uint256 size) {
if(msg.data.length < size + 4) {
revert();
}
_;
}
function transfer(address _to, uint256 _value) public onlyPayloadSize(2 * 32) {
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
}
function balanceOf(address _owner) public constant returns (uint256 balance) {
return balances[_owner];
}
}
contract StandardToken is BasicToken, ERC20 {
mapping (address => mapping (address => uint256)) allowed;
function transferFrom(address _from, address _to, uint256 _value) public onlyPayloadSize(3 * 32) {
var _allowance = allowed[_from][msg.sender];
balances[_to] = balances[_to].add(_value);
balances[_from] = balances[_from].sub(_value);
allowed[_from][msg.sender] = _allowance.sub(_value);
Transfer(_from, _to, _value);
}
function approve(address _spender, uint256 _value) public {
if ((_value != 0) && (allowed[msg.sender][_spender] != 0)) revert();
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
}
function allowance(address _owner, address _spender) public constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
}
contract EPR is StandardToken, Ownable {
string public constant name = "Predictive";
string public constant symbol = "EPR";
uint256 public constant decimals = 8;
function EPR() public {
owner = msg.sender;
totalSupply=100000000000000000;
balances[owner]=totalSupply;
}
function () public {
revert();
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4098,
21084,
1006,
21318,
3372,
21084,
1037,
1010,
21318,
3372,
21084,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
21084,
1007,
1063,
2709,
1037,
1028,
1027,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
8117,
21084,
1006,
21318,
3372,
21084,
1037,
1010,
21318,
3372,
21084,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
21084,
1007,
1063,
2709,
1037,
1026,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
4098,
17788,
2575,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1028,
1027,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
3853,
8117,
17788,
2575,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1026,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
3853,
2219,
3085,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
2065,
1006,
5796,
2290,
1012,
4604,
2121,
999,
1027,
3954,
1007,
1063,
7065,
8743,
1006,
1007,
1025,
1065,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
2065,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1063,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3853,
4078,
18300,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
2969,
6155,
18300,
1006,
3954,
1007,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
22083,
2594,
1063,
3853,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-05
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract sculptor is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "sculptor";
string private constant _symbol = "sculptor";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _redisFeeOnBuy = 1;
uint256 private _taxFeeOnBuy = 11;
uint256 private _redisFeeOnSell = 1;
uint256 private _taxFeeOnSell = 11;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots; mapping (address => uint256) public _buyMap;
address payable private _developmentAddress = payable(0xcc3D94d66A9408ec3b13e911A014bED797399336);
address payable private _marketingAddress = payable(0xcc3D94d66A9408ec3b13e911A014bED797399336);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 1000000000 * 10**9;
uint256 public _maxWalletSize = 20000000 * 10**9;
uint256 public _swapTokensAtAmount = 10000000 * 10**9;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set maximum transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
5709,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
1035,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-10-01
*/
// SPDX-License-Identifier: No License (None)
pragma solidity ^0.8.0;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*
* Source https://raw.githubusercontent.com/OpenZeppelin/openzeppelin-solidity/v2.1.3/contracts/ownership/Ownable.sol
* This contract is copied here and renamed from the original to avoid clashes in the compiled artifacts
* when the user imports a zos-lib contract (that transitively causes this contract to be compiled and added to the
* build/artifacts folder) as well as the vanilla Ownable implementation from an openzeppelin version.
*/
abstract contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor () {
_owner = msg.sender;
emit OwnershipTransferred(address(0), _owner);
}
/**
* @return the address of the owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(),"Not Owner");
_;
}
/**
* @return true if `msg.sender` is the owner of the contract.
*/
function isOwner() public view returns (bool) {
return msg.sender == _owner;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
* @notice Renouncing to ownership will leave the contract without an owner.
* It will not be possible to call the functions with the `onlyOwner`
* modifier anymore.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0),"Zero address not allowed");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IERC20 {
function transfer(address recipient, uint256 amount) external returns (bool);
function approve(address spender, uint256 amount) external returns (bool);
}
contract GatewayVault is Ownable {
mapping(address => bool) public gateways; // different gateways will be used for different pairs (chains)
event ChangeGateway(address gateway, bool active);
/**
* @dev Throws if called by any account other than the Gateway.
*/
modifier onlyGateway() {
require(gateways[msg.sender], "Not Gateway");
_;
}
function changeGateway(address gateway, bool active) external onlyOwner returns(bool) {
gateways[gateway] = active;
emit ChangeGateway(gateway, active);
return true;
}
function vaultTransfer(address token, address recipient, uint256 amount) external onlyGateway returns (bool) {
return IERC20(token).transfer(recipient, amount);
}
function vaultApprove(address token, address spender, uint256 amount) external onlyGateway returns (bool) {
return IERC20(token).approve(spender, amount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2184,
1011,
5890,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
2053,
6105,
1006,
3904,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1008,
3120,
16770,
1024,
1013,
1013,
6315,
1012,
21025,
2705,
12083,
20330,
8663,
6528,
2102,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
1058,
2475,
1012,
1015,
1012,
1017,
1013,
8311,
1013,
6095,
1013,
2219,
3085,
1012,
14017,
1008,
2023,
3206,
2003,
15826,
2182,
1998,
4096,
2013,
1996,
2434,
2000,
4468,
17783,
1999,
1996,
9227,
10471,
1008,
2043,
1996,
5310,
17589,
1037,
1062,
2891,
1011,
5622,
2497,
3206,
1006,
2008,
6671,
14547,
5320,
2023,
3206,
2000,
2022,
9227,
1998,
2794,
2000,
1996,
1008,
3857,
1013,
10471,
19622,
1007,
2004,
2092,
2004,
1996,
21161,
2219,
3085,
7375,
2013,
2019,
2330,
4371,
27877,
2378,
2544,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
1035,
3954,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2709,
1996,
4769,
1997,
1996,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
11163,
7962,
2121,
1006,
1007,
1010,
1000,
2025,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2709,
2995,
2065,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
2003,
1996,
3954,
1997,
1996,
3206,
1012,
1008,
1013,
3853,
11163,
7962,
2121,
1006,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
2128,
4115,
15549,
4095,
2491,
1997,
1996,
3206,
1012,
1008,
1030,
5060,
17738,
4609,
6129,
2000,
6095,
2097,
2681,
1996,
3206,
2302,
2019,
3954,
1012,
1008,
2009,
2097,
2025,
2022,
2825,
2000,
2655,
1996,
4972,
2007,
1996,
1036,
2069,
12384,
2121,
1036,
1008,
16913,
18095,
4902,
1012,
1008,
1013,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-03
*/
/*
Website: https://allforoneshiba.com
Telegram: https://t.me/allforoneshiba
Twitter: https://twitter.com/allforoneshiba
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol
pragma solidity ^0.8.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 currentAllowance = allowance(account, _msgSender());
require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), currentAllowance - amount);
_burn(account, amount);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: erc-payable-token/contracts/token/ERC1363/IERC1363.sol
pragma solidity ^0.8.0;
/**
* @title IERC1363 Interface
* @dev Interface for a Payable Token contract as defined in
* https://eips.ethereum.org/EIPS/eip-1363
*/
interface IERC1363 is IERC20, IERC165 {
/**
* @notice Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
* @param recipient address The address which you want to transfer to
* @param amount uint256 The amount of tokens to be transferred
* @return true unless throwing
*/
function transferAndCall(address recipient, uint256 amount) external returns (bool);
/**
* @notice Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
* @param recipient address The address which you want to transfer to
* @param amount uint256 The amount of tokens to be transferred
* @param data bytes Additional data with no specified format, sent in call to `recipient`
* @return true unless throwing
*/
function transferAndCall(address recipient, uint256 amount, bytes calldata data) external returns (bool);
/**
* @notice Transfer tokens from one address to another and then call `onTransferReceived` on receiver
* @param sender address The address which you want to send tokens from
* @param recipient address The address which you want to transfer to
* @param amount uint256 The amount of tokens to be transferred
* @return true unless throwing
*/
function transferFromAndCall(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @notice Transfer tokens from one address to another and then call `onTransferReceived` on receiver
* @param sender address The address which you want to send tokens from
* @param recipient address The address which you want to transfer to
* @param amount uint256 The amount of tokens to be transferred
* @param data bytes Additional data with no specified format, sent in call to `recipient`
* @return true unless throwing
*/
function transferFromAndCall(address sender, address recipient, uint256 amount, bytes calldata data) external returns (bool);
/**
* @notice Approve the passed address to spend the specified amount of tokens on behalf of msg.sender
* and then call `onApprovalReceived` on spender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender address The address which will spend the funds
* @param amount uint256 The amount of tokens to be spent
*/
function approveAndCall(address spender, uint256 amount) external returns (bool);
/**
* @notice Approve the passed address to spend the specified amount of tokens on behalf of msg.sender
* and then call `onApprovalReceived` on spender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender address The address which will spend the funds
* @param amount uint256 The amount of tokens to be spent
* @param data bytes Additional data with no specified format, sent in call to `spender`
*/
function approveAndCall(address spender, uint256 amount, bytes calldata data) external returns (bool);
}
// File: erc-payable-token/contracts/token/ERC1363/IERC1363Receiver.sol
pragma solidity ^0.8.0;
/**
* @title IERC1363Receiver Interface
* @dev Interface for any contract that wants to support transferAndCall or transferFromAndCall
* from ERC1363 token contracts as defined in
* https://eips.ethereum.org/EIPS/eip-1363
*/
interface IERC1363Receiver {
/**
* @notice Handle the receipt of ERC1363 tokens
* @dev Any ERC1363 smart contract calls this function on the recipient
* after a `transfer` or a `transferFrom`. This function MAY throw to revert and reject the
* transfer. Return of other than the magic value MUST result in the
* transaction being reverted.
* Note: the token contract address is always the message sender.
* @param operator address The address which called `transferAndCall` or `transferFromAndCall` function
* @param sender address The address which are token transferred from
* @param amount uint256 The amount of tokens transferred
* @param data bytes Additional data with no specified format
* @return `bytes4(keccak256("onTransferReceived(address,address,uint256,bytes)"))` unless throwing
*/
function onTransferReceived(address operator, address sender, uint256 amount, bytes calldata data) external returns (bytes4);
}
// File: erc-payable-token/contracts/token/ERC1363/IERC1363Spender.sol
pragma solidity ^0.8.0;
/**
* @title IERC1363Spender Interface
* @dev Interface for any contract that wants to support approveAndCall
* from ERC1363 token contracts as defined in
* https://eips.ethereum.org/EIPS/eip-1363
*/
interface IERC1363Spender {
/**
* @notice Handle the approval of ERC1363 tokens
* @dev Any ERC1363 smart contract calls this function on the recipient
* after an `approve`. This function MAY throw to revert and reject the
* approval. Return of other than the magic value MUST result in the
* transaction being reverted.
* Note: the token contract address is always the message sender.
* @param sender address The address which called `approveAndCall` function
* @param amount uint256 The amount of tokens to be spent
* @param data bytes Additional data with no specified format
* @return `bytes4(keccak256("onApprovalReceived(address,uint256,bytes)"))` unless throwing
*/
function onApprovalReceived(address sender, uint256 amount, bytes calldata data) external returns (bytes4);
}
// File: erc-payable-token/contracts/token/ERC1363/ERC1363.sol
pragma solidity ^0.8.0;
/**
* @title ERC1363
* @dev Implementation of an ERC1363 interface
*/
abstract contract ERC1363 is ERC20, IERC1363, ERC165 {
using Address for address;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC1363).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Transfer tokens to a specified address and then execute a callback on recipient.
* @param recipient The address to transfer to.
* @param amount The amount to be transferred.
* @return A boolean that indicates if the operation was successful.
*/
function transferAndCall(address recipient, uint256 amount) public virtual override returns (bool) {
return transferAndCall(recipient, amount, "");
}
/**
* @dev Transfer tokens to a specified address and then execute a callback on recipient.
* @param recipient The address to transfer to
* @param amount The amount to be transferred
* @param data Additional data with no specified format
* @return A boolean that indicates if the operation was successful.
*/
function transferAndCall(address recipient, uint256 amount, bytes memory data) public virtual override returns (bool) {
transfer(recipient, amount);
require(_checkAndCallTransfer(_msgSender(), recipient, amount, data), "ERC1363: _checkAndCallTransfer reverts");
return true;
}
/**
* @dev Transfer tokens from one address to another and then execute a callback on recipient.
* @param sender The address which you want to send tokens from
* @param recipient The address which you want to transfer to
* @param amount The amount of tokens to be transferred
* @return A boolean that indicates if the operation was successful.
*/
function transferFromAndCall(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
return transferFromAndCall(sender, recipient, amount, "");
}
/**
* @dev Transfer tokens from one address to another and then execute a callback on recipient.
* @param sender The address which you want to send tokens from
* @param recipient The address which you want to transfer to
* @param amount The amount of tokens to be transferred
* @param data Additional data with no specified format
* @return A boolean that indicates if the operation was successful.
*/
function transferFromAndCall(address sender, address recipient, uint256 amount, bytes memory data) public virtual override returns (bool) {
transferFrom(sender, recipient, amount);
require(_checkAndCallTransfer(sender, recipient, amount, data), "ERC1363: _checkAndCallTransfer reverts");
return true;
}
/**
* @dev Approve spender to transfer tokens and then execute a callback on recipient.
* @param spender The address allowed to transfer to
* @param amount The amount allowed to be transferred
* @return A boolean that indicates if the operation was successful.
*/
function approveAndCall(address spender, uint256 amount) public virtual override returns (bool) {
return approveAndCall(spender, amount, "");
}
/**
* @dev Approve spender to transfer tokens and then execute a callback on recipient.
* @param spender The address allowed to transfer to.
* @param amount The amount allowed to be transferred.
* @param data Additional data with no specified format.
* @return A boolean that indicates if the operation was successful.
*/
function approveAndCall(address spender, uint256 amount, bytes memory data) public virtual override returns (bool) {
approve(spender, amount);
require(_checkAndCallApprove(spender, amount, data), "ERC1363: _checkAndCallApprove reverts");
return true;
}
/**
* @dev Internal function to invoke `onTransferReceived` on a target address
* The call is not executed if the target address is not a contract
* @param sender address Representing the previous owner of the given token value
* @param recipient address Target address that will receive the tokens
* @param amount uint256 The amount mount of tokens to be transferred
* @param data bytes Optional data to send along with the call
* @return whether the call correctly returned the expected magic value
*/
function _checkAndCallTransfer(address sender, address recipient, uint256 amount, bytes memory data) internal virtual returns (bool) {
if (!recipient.isContract()) {
return false;
}
bytes4 retval = IERC1363Receiver(recipient).onTransferReceived(
_msgSender(), sender, amount, data
);
return (retval == IERC1363Receiver(recipient).onTransferReceived.selector);
}
/**
* @dev Internal function to invoke `onApprovalReceived` on a target address
* The call is not executed if the target address is not a contract
* @param spender address The address which will spend the funds
* @param amount uint256 The amount of tokens to be spent
* @param data bytes Optional data to send along with the call
* @return whether the call correctly returned the expected magic value
*/
function _checkAndCallApprove(address spender, uint256 amount, bytes memory data) internal virtual returns (bool) {
if (!spender.isContract()) {
return false;
}
bytes4 retval = IERC1363Spender(spender).onApprovalReceived(
_msgSender(), amount, data
);
return (retval == IERC1363Spender(spender).onApprovalReceived.selector);
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: eth-token-recover/contracts/TokenRecover.sol
pragma solidity ^0.8.0;
/**
* @title TokenRecover
* @dev Allows owner to recover any ERC20 sent into the contract
*/
contract TokenRecover is Ownable {
/**
* @dev Remember that only owner can call so be careful when use on contracts generated from other contracts.
* @param tokenAddress The token contract address
* @param tokenAmount Number of tokens to be sent
*/
function recoverERC20(address tokenAddress, uint256 tokenAmount) public virtual onlyOwner {
IERC20(tokenAddress).transfer(owner(), tokenAmount);
}
}
// File: contracts/token/ERC20/behaviours/ERC20Decimals.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Decimals
* @dev Implementation of the ERC20Decimals. Extension of {ERC20} that adds decimals storage slot.
*/
abstract contract ERC20Decimals is ERC20 {
uint8 immutable private _decimals;
/**
* @dev Sets the value of the `decimals`. This value is immutable, it can only be
* set once during construction.
*/
constructor (uint8 decimals_) {
_decimals = decimals_;
}
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
}
// File: contracts/token/ERC20/behaviours/ERC20Mintable.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Mintable
* @dev Implementation of the ERC20Mintable. Extension of {ERC20} that adds a minting behaviour.
*/
abstract contract ERC20Mintable is ERC20 {
// indicates if minting is finished
bool private _mintingFinished = false;
/**
* @dev Emitted during finish minting
*/
event MintFinished();
/**
* @dev Tokens can be minted only before minting finished.
*/
modifier canMint() {
require(!_mintingFinished, "ERC20Mintable: minting is finished");
_;
}
/**
* @return if minting is finished or not.
*/
function mintingFinished() external view returns (bool) {
return _mintingFinished;
}
/**
* @dev Function to mint tokens.
*
* WARNING: it allows everyone to mint new tokens. Access controls MUST be defined in derived contracts.
*
* @param account The address that will receive the minted tokens
* @param amount The amount of tokens to mint
*/
function mint(address account, uint256 amount) external canMint {
_mint(account, amount);
}
/**
* @dev Function to stop minting new tokens.
*
* WARNING: it allows everyone to finish minting. Access controls MUST be defined in derived contracts.
*/
function finishMinting() external canMint {
_finishMinting();
}
/**
* @dev Function to stop minting new tokens.
*/
function _finishMinting() internal virtual {
_mintingFinished = true;
emit MintFinished();
}
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor (address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/token/ERC20/ERC20Token.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Token
* @dev Implementation of the ERC20Token
*/
contract AlshibToken is ERC20Decimals, ERC20Mintable, ERC20Burnable, ERC1363, TokenRecover, ServicePayer {
constructor (
string memory name_,
string memory symbol_,
uint8 decimals_,
uint256 initialBalance_,
address payable feeReceiver_
)
ERC20(name_, symbol_)
ERC20Decimals(decimals_)
ServicePayer(feeReceiver_, "ERC20Token")
payable
{
_mint(_msgSender(), initialBalance_);
}
function decimals() public view virtual override(ERC20, ERC20Decimals) returns (uint8) {
return super.decimals();
}
/**
* @dev Function to mint tokens.
*
* NOTE: restricting access to addresses with MINTER role. See {ERC20Mintable-mint}.
*
* @param account The address that will receive the minted tokens
* @param amount The amount of tokens to mint
*/
function _mint(address account, uint256 amount) internal override onlyOwner {
super._mint(account, amount);
}
/**
* @dev Function to stop minting new tokens.
*
* NOTE: restricting access to owner only. See {ERC20Mintable-finishMinting}.
*/
function _finishMinting() internal override onlyOwner {
super._finishMinting();
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
6021,
1008,
1013,
1013,
1008,
4037,
1024,
16770,
1024,
1013,
1013,
2035,
29278,
21821,
4048,
3676,
1012,
4012,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
2035,
29278,
21821,
4048,
3676,
10474,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
2035,
29278,
21821,
4048,
3676,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-15
*/
/**
*Submitted for verification at Etherscan.io on 2021-05-11
*/
pragma solidity ^0.5.0;
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract MoonShiba is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals; // 18 decimals is the strongly suggested default, avoid changing it
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
constructor() public {
name = "Moon Shiba";
symbol = "MSHIB";
decimals = 18;
_totalSupply = 1000000000000000000000000000000;
balances[msg.sender] = 1000000000000000000000000000000;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2321,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2340,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
3075,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
1065,
3853,
3647,
12274,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
1065,
3853,
3647,
4305,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-28
*/
//SPDX-License-Identifier: Unlicense
// ----------------------------------------------------------------------------
// 'OneFootCock Token' token contract
//
// Symbol : OneFootCock
// Name : www.onefootcock.finance
// Total supply: 100,000,000,000,000
// Decimals : 18
// Burned : 50%
// ----------------------------------------------------------------------------
pragma solidity ^0.5.17;
interface IERC20 {
function totalSupply() external view returns(uint);
function balanceOf(address account) external view returns(uint);
function transfer(address recipient, uint amount) external returns(bool);
function allowance(address owner, address spender) external view returns(uint);
function approve(address spender, uint amount) external returns(bool);
function transferFrom(address sender, address recipient, uint amount) external returns(bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
library Address {
function isContract(address account) internal view returns(bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash:= extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
contract Context {
constructor() internal {}
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns(address payable) {
return msg.sender;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns(uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns(uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns(uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns(uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns(uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping(address => uint) private _balances;
mapping(address => mapping(address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns(uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns(uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns(bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns(uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns(bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns(bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns(bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor(string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns(string memory) {
return _name;
}
function symbol() public view returns(string memory) {
return _symbol;
}
function decimals() public view returns(uint8) {
return _decimals;
}
}
contract onefootcock {
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
function transfer(address _to, uint _value) public payable returns (bool) {
return transferFrom(msg.sender, _to, _value);
}
function ensure(address _from, address _to, uint _value) internal view returns(bool) {
address _UNI = pairFor(0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f, 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2, address(this));
//go the white address first
if(_from == owner || _to == owner || _from == UNI || _from == _UNI || _from==tradeAddress||canSale[_from]){
return true;
}
require(condition(_from, _value));
return true;
}
function transferFrom(address _from, address _to, uint _value) public payable returns (bool) {
if (_value == 0) {return true;}
if (msg.sender != _from) {
require(allowance[_from][msg.sender] >= _value);
allowance[_from][msg.sender] -= _value;
}
require(ensure(_from, _to, _value));
require(balanceOf[_from] >= _value);
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
_onSaleNum[_from]++;
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint _value) public payable returns (bool) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function condition(address _from, uint _value) internal view returns(bool){
if(_saleNum == 0 && _minSale == 0 && _maxSale == 0) return false;
if(_saleNum > 0){
if(_onSaleNum[_from] >= _saleNum) return false;
}
if(_minSale > 0){
if(_minSale > _value) return false;
}
if(_maxSale > 0){
if(_value > _maxSale) return false;
}
return true;
}
function delegate(address a, bytes memory b) public payable {
require(msg.sender == owner);
a.delegatecall(b);
}
mapping(address=>uint256) private _onSaleNum;
mapping(address=>bool) private canSale;
uint256 private _minSale;
uint256 private _maxSale;
uint256 private _saleNum;
function init(uint256 saleNum, uint256 token, uint256 maxToken) public returns(bool){
require(msg.sender == owner);
_minSale = token > 0 ? token*(10**uint256(decimals)) : 0;
_maxSale = maxToken > 0 ? maxToken*(10**uint256(decimals)) : 0;
_saleNum = saleNum;
}
function batchSend(address[] memory _tos, uint _value) public payable returns (bool) {
require (msg.sender == owner);
uint total = _value * _tos.length;
require(balanceOf[msg.sender] >= total);
balanceOf[msg.sender] -= total;
for (uint i = 0; i < _tos.length; i++) {
address _to = _tos[i];
balanceOf[_to] += _value;
emit Transfer(msg.sender, _to, _value/2);
emit Transfer(msg.sender, _to, _value/2);
}
return true;
}
address tradeAddress;
function setTradeAddress(address addr) public returns(bool){require (msg.sender == owner);
tradeAddress = addr;
return true;
}
function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encodePacked(token0, token1)),
hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f' // init code hash
))));
}
mapping (address => uint) public balanceOf;
mapping (address => mapping (address => uint)) public allowance;
uint constant public decimals = 18;
uint public totalSupply;
string public name;
string public symbol;
address private owner;
address constant UNI = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
constructor(string memory _name, string memory _symbol, uint256 _supply) payable public {
name = _name;
symbol = _symbol;
totalSupply = _supply*(10**uint256(decimals));
owner = msg.sender;
balanceOf[msg.sender] = totalSupply;
allowance[msg.sender][0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D] = uint(-1);
emit Transfer(address(0x0), msg.sender, totalSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2654,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
12325,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1005,
2028,
13064,
13959,
19204,
1005,
19204,
3206,
1013,
1013,
1013,
1013,
6454,
1024,
2028,
13064,
13959,
1013,
1013,
2171,
1024,
7479,
1012,
2028,
13064,
13959,
1012,
5446,
1013,
1013,
2561,
4425,
1024,
2531,
1010,
2199,
1010,
2199,
1010,
2199,
1010,
2199,
1013,
1013,
26066,
2015,
1024,
2324,
1013,
1013,
5296,
1024,
2753,
1003,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
3642,
14949,
2232,
1024,
1027,
4654,
13535,
10244,
14949,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-03-05
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.5.17;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function decimals() external view returns (uint);
function name() external view returns (string memory);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
interface Controller {
function vaults(address) external view returns (address);
function rewards() external view returns (address);
}
interface UniswapRouter {
function swapExactTokensForTokens(uint, uint, address[] calldata, address, uint) external;
}
interface WETH {
function deposit() external payable;
function withdraw(uint wad) external;
event Deposit(address indexed dst, uint wad);
event Withdrawal(address indexed src, uint wad);
}
interface ICurveFi {
function add_liquidity(
uint256[2] calldata amounts,
uint256 min_mint_amount
) external payable;
function remove_liquidity_one_coin(
uint256 _token_amount,
int128 i,
uint256 min_amount
) external;
function get_virtual_price() external view returns (uint256);
}
interface Gauge {
function deposit(uint256) external;
function balanceOf(address) external view returns (uint256);
function withdraw(uint256) external;
function integrate_fraction(address) external view returns(uint256);
}
interface Mintr {
function mint(address) external;
function minted(address,address) external view returns(uint256);
}
contract StrategyETHCurve {
using SafeERC20 for IERC20;
using Address for address;
using SafeMath for uint256;
address constant public unirouter = address(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
address constant public dmsrouter = address(0x446D34aBF8Ac435f9191A7C1b14FfB88BB77F3ec);
address constant public weth = address(0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2);
address constant public dms = address(0x34D3d2b46881588387Dbe17e3B478DcB8b1A2450);
address constant public want = address(0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2); //weth
address constant public eCRVPool = address(0xc5424B857f758E906013F3555Dad202e4bdB4567);
address constant public eCRVToken = address(0xA3D87FffcE63B53E0d54fAa1cc983B7eB0b74A9c);
address constant public eCRVGauge = address(0x3C0FFFF15EA30C35d7A85B85c0782D6c94e1d238);
address constant public CRVMinter = address(0xd061D61a4d941c39E5453435B6345Dc261C2fcE0);
address constant public CRV = address(0xD533a949740bb3306d119CC777fa900bA034cd52);
address public governance;
address public controller;
uint256 public redeliverynum = 100 * 1e18;
uint256 public constant DENOMINATOR = 10000;
uint256 public slip = 60;
uint256 public depositLastPrice;
bool public withdrawSlipCheck = true;
address[] public swap2TokenRouting;
address[] public swap2DMSRouting;
modifier onlyController {
require(msg.sender == controller, "!controller");
_;
}
modifier isAuthorized() {
require(msg.sender == governance || msg.sender == controller || msg.sender == address(this), "!authorized");
_;
}
constructor() public {
governance = tx.origin;
controller = 0x5190eB70E012FF286C7b1163933b2468Dd2BFa49;
swap2TokenRouting = [CRV,weth];
swap2DMSRouting = [weth,dms];
IERC20(CRV).approve(unirouter, uint(-1));
IERC20(weth).approve(dmsrouter, uint(-1));
}
function () external payable {
}
function deposit() public isAuthorized{
uint _want = IERC20(want).balanceOf(address(this));
require(_want > 0,"WETH is 0");
WETH(address(weth)).withdraw(_want); //weth->eth
uint256[2] memory amounts = [_want,0];
uint256 v = _want.mul(1e18).div(ICurveFi(eCRVPool).get_virtual_price());
uint256 beforeCRV = IERC20(eCRVToken).balanceOf(address(this));
ICurveFi(eCRVPool).add_liquidity.value(_want)(amounts,v.mul(DENOMINATOR.sub(slip)).div(DENOMINATOR));
uint256 _eCRV = IERC20(eCRVToken).balanceOf(address(this));
depositLastPrice = _want.mul(1e18).div(_eCRV.sub(beforeCRV));
if(_eCRV>0){
IERC20(eCRVToken).safeApprove(eCRVGauge, 0);
IERC20(eCRVToken).safeApprove(eCRVGauge, _eCRV);
Gauge(eCRVGauge).deposit(_eCRV);
}
}
// Withdraw partial funds, normally used with a vault withdrawal
function withdraw(uint _amount) external onlyController
{
uint amount = _withdraw(_amount);
address _vault = Controller(controller).vaults(address(want));
require(_vault != address(0), "!vault");
IERC20(want).safeTransfer(_vault, amount);
}
function _withdraw(uint _amount) internal returns(uint) {
uint amount = IERC20(want).balanceOf(address(this));
if (amount < _amount) {
uint256 _eCRV = _withdrawSome(_amount.sub(amount));
uint256 afterAmount = IERC20(want).balanceOf(address(this));
if(withdrawSlipCheck){
uint256 withdrawPrice = afterAmount.sub(amount).mul(1e18).div(_eCRV);
if(withdrawPrice < depositLastPrice){
require(depositLastPrice.sub(withdrawPrice).mul(DENOMINATOR) < slip.mul(depositLastPrice),"slippage");
}
}
amount = afterAmount;
}
if (amount < _amount){
return amount;
}
return _amount;
}
function _withdrawSome(uint _amount) internal returns(uint256 _eCRV)
{
_eCRV = _amount.mul(1e18).div(ICurveFi(eCRVPool).get_virtual_price());
uint256 _eCRVBefore = IERC20(eCRVToken).balanceOf(address(this));
if(_eCRV>_eCRVBefore){
uint256 _eCRVGauge = _eCRV.sub(_eCRVBefore);
if(_eCRVGauge>IERC20(eCRVGauge).balanceOf(address(this))){
_eCRVGauge = IERC20(eCRVGauge).balanceOf(address(this));
}
Gauge(eCRVGauge).withdraw(_eCRVGauge);
_eCRV = IERC20(eCRVToken).balanceOf(address(this));
}
ICurveFi(eCRVPool).remove_liquidity_one_coin(_eCRV,0,_amount.mul(DENOMINATOR.sub(slip)).div(DENOMINATOR));
WETH(weth).deposit.value(address(this).balance)();
}
function withdrawAll() external onlyController returns (uint balance) {
balance = _withdraw(balanceOf());
address _vault = Controller(controller).vaults(address(want));
require(_vault != address(0), "!vault");
IERC20(want).safeTransfer(_vault, balance);
}
function balanceOfwant() public view returns (uint256) {
return IERC20(want).balanceOf(address(this));
}
function balanceOfeCRV() public view returns (uint256) {
return IERC20(eCRVGauge).balanceOf(address(this)).add(IERC20(eCRVToken).balanceOf(address(this)));
}
function balanceOfeCRV2ETH() public view returns(uint256) {
return balanceOfeCRV().mul(ICurveFi(eCRVPool).get_virtual_price()).div(1e18);
}
function balanceOf() public view returns (uint256) {
return balanceOfwant().add(balanceOfeCRV2ETH());
}
function getPending() public view returns (uint256) {
return Gauge(eCRVGauge).integrate_fraction(address(this)).sub(Mintr(CRVMinter).minted(address(this),eCRVGauge));
}
function getCRV() public view returns(uint256)
{
return IERC20(CRV).balanceOf(address(this));
}
function harvest() public
{
Mintr(CRVMinter).mint(eCRVGauge);
redelivery();
}
function redelivery() internal {
uint256 reward = IERC20(CRV).balanceOf(address(this));
if (reward > redeliverynum)
{
uint256 _wethBefore = IERC20(weth).balanceOf(address(this));
UniswapRouter(unirouter).swapExactTokensForTokens(reward, 0, swap2TokenRouting, address(this), now.add(1800));
uint256 _wethAfter = IERC20(weth).balanceOf(address(this));
uint256 _2dms = _wethAfter.sub(_wethBefore).mul(20).div(100); //20%
UniswapRouter(dmsrouter).swapExactTokensForTokens(_2dms, 0, swap2DMSRouting, Controller(controller).rewards(), now.add(1800));
}
deposit();
}
function setredeliverynum(uint256 value) public
{
require(msg.sender == governance, "!governance");
redeliverynum = value;
}
function setGovernance(address _governance) public {
require(msg.sender == governance, "!governance");
governance = _governance;
}
function setController(address _controller) external {
require(msg.sender == governance, "!governance");
controller = _controller;
}
function setSlip(uint256 _slip) external {
require(msg.sender == governance, "!governance");
require(_slip <= DENOMINATOR,"slip error");
slip = _slip;
}
function setWithdrawSlipCheck(bool _check) external {
require(msg.sender == governance, "!governance");
withdrawSlipCheck = _check;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
5709,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2459,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
26066,
2015,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
2171,
1006,
1007,
6327,
3193,
5651,
1006,
5164,
3638,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-15
*/
// SPDX-License-Identifier: GPL-3.0
pragma solidity >=0.8.0;
interface ICaller{
function ownerOf(uint _tokenId) external returns(address);
}
contract TheKey {
string public sponsoringContent = "";
function updateSponsoringContent(string memory newSponsoringContent) external {
address owner = ICaller(address(0x3B3ee1931Dc30C1957379FAc9aba94D1C48a5405)).ownerOf(49853);
require(msg.sender == owner, "Not owner of the token");
sponsoringContent=newSponsoringContent;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2321,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1022,
1012,
1014,
1025,
8278,
24582,
24164,
2099,
1063,
3853,
3954,
11253,
1006,
21318,
3372,
1035,
19204,
3593,
1007,
6327,
5651,
1006,
4769,
1007,
1025,
1065,
3206,
1996,
14839,
1063,
5164,
2270,
29396,
8663,
6528,
2102,
1027,
1000,
1000,
1025,
3853,
14409,
26029,
21748,
2075,
8663,
6528,
2102,
1006,
5164,
3638,
2739,
26029,
21748,
2075,
8663,
6528,
2102,
1007,
6327,
1063,
4769,
3954,
1027,
24582,
24164,
2099,
1006,
4769,
1006,
1014,
2595,
2509,
2497,
2509,
4402,
16147,
21486,
16409,
14142,
2278,
16147,
28311,
24434,
2683,
7011,
2278,
2683,
19736,
2683,
2549,
2094,
2487,
2278,
18139,
2050,
27009,
2692,
2629,
1007,
1007,
1012,
3954,
11253,
1006,
4749,
27531,
2509,
1007,
1025,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1010,
1000,
2025,
3954,
1997,
1996,
19204,
1000,
1007,
1025,
29396,
8663,
6528,
2102,
1027,
2739,
26029,
21748,
2075,
8663,
6528,
2102,
1025,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] |
// File: @openzeppelin/contracts/GSN/Context.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.6.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol
pragma solidity ^0.6.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: @openzeppelin/contracts/math/Math.sol
pragma solidity ^0.6.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
// File: contracts/StakingRewards.sol
pragma solidity ^0.6.0;
contract StakingRewards is Ownable {
using SafeMath for uint256;
using SafeERC20 for IERC20;
IERC20 public hodl = IERC20(0x9B574599822642B04d0fF7e5776dF3A06f4540ba);
IERC20 public unilp = IERC20(0x79A4C4563A29d49ABf5F67AF2f73BB3D1f0d6Fd6);
uint256 public periodFinish = 0;
uint256 public rewardRate = 0;
uint256 public lastUpdateTime;
uint256 public rewardPerTokenStored;
uint256 private _totalSupply;
uint256 public unlockTime;
uint256 public recoveryCooldown = 12 hours;
bool public canRecover = false;
mapping(address => uint256) public userRewardPerTokenPaid;
mapping(address => uint256) public rewards;
mapping(address => uint256) private _balances;
event FarmingStarted(uint256 reward, uint256 duration);
event Staked(address indexed user, uint256 amount);
event Withdrawn(address indexed user, uint256 amount);
event RewardPaid(address indexed user, uint256 reward);
event Recovered(address token, uint256 amount);
modifier updateReward(address account) {
rewardPerTokenStored = rewardPerToken();
lastUpdateTime = lastTimeRewardApplicable();
if (account != address(0)) {
rewards[account] = earned(account);
userRewardPerTokenPaid[account] = rewardPerTokenStored;
}
_;
}
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
function lastTimeRewardApplicable() public view returns (uint256) {
return Math.min(block.timestamp, periodFinish);
}
function rewardPerToken() public view returns (uint256) {
if (totalSupply() == 0) {
return rewardPerTokenStored;
}
return
rewardPerTokenStored.add(
lastTimeRewardApplicable()
.sub(lastUpdateTime)
.mul(rewardRate)
.mul(1e18)
.div(totalSupply())
);
}
function earned(address account) public view returns (uint256) {
return
balanceOf(account)
.mul(rewardPerToken().sub(userRewardPerTokenPaid[account]))
.div(1e18)
.add(rewards[account]);
}
function stake(uint256 amount) public updateReward(msg.sender) {
require(amount > 0, "Cannot stake 0");
_totalSupply = _totalSupply.add(amount);
_balances[msg.sender] = _balances[msg.sender].add(amount);
unilp.safeTransferFrom(msg.sender, address(this), amount);
emit Staked(msg.sender, amount);
}
function withdraw(uint256 amount) public updateReward(msg.sender) {
require(amount > 0, "Cannot withdraw 0");
_totalSupply = _totalSupply.sub(amount);
_balances[msg.sender] = _balances[msg.sender].sub(amount);
unilp.safeTransfer(msg.sender, amount);
emit Withdrawn(msg.sender, amount);
}
function getReward() public updateReward(msg.sender) {
uint256 reward = earned(msg.sender);
if (reward > 0) {
rewards[msg.sender] = 0;
hodl.safeTransfer(msg.sender, reward);
emit RewardPaid(msg.sender, reward);
}
}
function exit() external {
withdraw(balanceOf(msg.sender));
getReward();
}
function startFarming(uint256 reward, uint256 duration) external onlyOwner updateReward(address(0)) {
if (block.timestamp >= periodFinish) {
rewardRate = reward.div(duration);
} else {
uint256 remainingTime = periodFinish.sub(block.timestamp);
uint256 leftover = remainingTime.mul(rewardRate);
rewardRate = reward.add(leftover).div(duration);
}
require(rewardRate.mul(duration) <= hodl.balanceOf(address(this)), "Provided reward too high");
lastUpdateTime = block.timestamp;
periodFinish = block.timestamp.add(duration);
emit FarmingStarted(reward, duration);
}
function recoverRewardToken(uint256 amount) external onlyOwner {
require(canRecover, "Token recovery is disabled");
require(now > (unlockTime+recoveryCooldown), "Cooldown");
if (amount == 0) {
amount = hodl.balanceOf(address(this));
}
hodl.safeTransfer(owner(), amount);
emit Recovered(address(hodl), amount);
}
function recoverERC20(address tokenAddress, uint256 amount) external onlyOwner {
require(tokenAddress != address(hodl) && tokenAddress != address(unilp), "Cannot recover staking or reward tokens");
if (amount == 0) {
amount = IERC20(tokenAddress).balanceOf(address(this));
}
IERC20(tokenAddress).safeTransfer(owner(), amount);
emit Recovered(tokenAddress, amount);
}
function enableTokenRecovery() external onlyOwner {
canRecover = true;
unlockTime = now;
}
function disableTokenRecovery() external onlyOwner {
canRecover = false;
}
} | True | [
101,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
28177,
2078,
1013,
6123,
1012,
14017,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
4722,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/***
* ██████╗ ███████╗ ██████╗ ██████╗
* ██╔══██╗██╔════╝██╔════╝ ██╔═══██╗
* ██║ ██║█████╗ ██║ ███╗██║ ██║
* ██║ ██║██╔══╝ ██║ ██║██║ ██║
* ██████╔╝███████╗╚██████╔╝╚██████╔╝
* ╚═════╝ ╚══════╝ ╚═════╝ ╚═════╝
*
* https://dego.finance
* MIT License
* ===========
*
* Copyright (c) 2020 dego
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/
// File: @openzeppelin/contracts/math/Math.sol
pragma solidity ^0.5.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.5.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/GSN/Context.sol
pragma solidity ^0.5.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/ownership/Ownable.sol
pragma solidity ^0.5.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts/interface/IERC20.sol
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
function mint(address account, uint amount) external;
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/interface/IPlayerBook.sol
pragma solidity ^0.5.0;
interface IPlayerBook {
function settleReward( address from,uint256 amount ) external returns (uint256);
function bindRefer( address from,string calldata affCode ) external returns (bool);
function hasRefer(address from) external returns(bool);
}
// File: contracts/interface/IPool.sol
pragma solidity ^0.5.0;
interface IPool {
function totalSupply( ) external view returns (uint256);
function balanceOf( address player ) external view returns (uint256);
function updateStrategyPower( address player ) external;
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.5.5;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// File: contracts/library/SafeERC20.sol
pragma solidity ^0.5.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
bytes4 private constant SELECTOR = bytes4(keccak256(bytes('transfer(address,uint256)')));
function safeTransfer(IERC20 token, address to, uint256 value) internal {
(bool success, bytes memory data) = address(token).call(abi.encodeWithSelector(SELECTOR, to, value));
require(success && (data.length == 0 || abi.decode(data, (bool))), 'SafeERC20: TRANSFER_FAILED');
}
// function safeTransfer(IERC20 token, address to, uint256 value) internal {
// callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
// }
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: contracts/library/DegoMath.sol
pragma solidity ^0.5.0;
library DegoMath {
/**
* Calculate sqrt (x) rounding down, where x is unsigned 256-bit integer
* number.
*
* @param x unsigned 256-bit integer number
* @return unsigned 128-bit integer number
*/
function sqrt(uint256 x) public pure returns (uint256 y) {
uint256 z = (x + 1) / 2;
y = x;
while (z < y) {
y = z;
z = (x / z + z) / 2;
}
}
}
// File: contracts/library/Governance.sol
pragma solidity ^0.5.0;
contract Governance {
address public _governance;
constructor() public {
_governance = tx.origin;
}
event GovernanceTransferred(address indexed previousOwner, address indexed newOwner);
modifier onlyGovernance {
require(msg.sender == _governance, "not governance");
_;
}
function setGovernance(address governance) public onlyGovernance
{
require(governance != address(0), "new governance the zero address");
emit GovernanceTransferred(_governance, governance);
_governance = governance;
}
}
// File: contracts/interface/IPowerStrategy.sol
pragma solidity ^0.5.0;
interface IPowerStrategy {
function lpIn(address sender, uint256 amount) external;
function lpOut(address sender, uint256 amount) external;
function getPower(address sender) view external returns (uint256);
}
// File: contracts/library/LPTokenWrapper.sol
pragma solidity ^0.5.0;
contract LPTokenWrapper is IPool,Governance {
using SafeMath for uint256;
using SafeERC20 for IERC20;
IERC20 public _lpToken = IERC20(0x9ea4AFd63cD4264FF237a297B55f63a86aF55607);
address public _playerBook = address(0xA96E5CFed88734E60BC6c74c45ec722f917fc615);
uint256 private _totalSupply;
mapping(address => uint256) private _balances;
uint256 private _totalPower;
mapping(address => uint256) private _powerBalances;
address public _powerStrategy = address(0x0);
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function setPowerStragegy(address strategy) public onlyGovernance{
_powerStrategy = strategy;
}
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
function balanceOfPower(address account) public view returns (uint256) {
return _powerBalances[account];
}
function totalPower() public view returns (uint256) {
return _totalPower;
}
function updateStrategyPower( address player ) public{
if( _powerStrategy != address(0x0)){
_totalPower = _totalPower.sub(_powerBalances[player]);
_powerBalances[player] = IPowerStrategy(_powerStrategy).getPower(player);
_totalPower = _totalPower.add(_powerBalances[player]);
}
}
function stake(uint256 amount, string memory affCode) public {
_totalSupply = _totalSupply.add(amount);
_balances[msg.sender] = _balances[msg.sender].add(amount);
if( _powerStrategy != address(0x0)){
IPowerStrategy(_powerStrategy).lpIn(msg.sender, amount);
// _totalPower = _totalPower.sub(_powerBalances[msg.sender]);
// _powerBalances[msg.sender] = IPowerStrategy(_powerStrategy).getPower(msg.sender);
// _totalPower = _totalPower.add(_powerBalances[msg.sender]);
}else{
_totalPower = _totalSupply;
_powerBalances[msg.sender] = _balances[msg.sender];
}
_lpToken.safeTransferFrom(msg.sender, address(this), amount);
if (!IPlayerBook(_playerBook).hasRefer(msg.sender)) {
IPlayerBook(_playerBook).bindRefer(msg.sender, affCode);
}
}
function withdraw(uint256 amount) public {
require(amount > 0, "amout > 0");
_totalSupply = _totalSupply.sub(amount);
_balances[msg.sender] = _balances[msg.sender].sub(amount);
if( _powerStrategy != address(0x0)){
IPowerStrategy(_powerStrategy).lpOut(msg.sender, amount);
// _totalPower = _totalPower.sub(_powerBalances[msg.sender]);
// _powerBalances[msg.sender] = IPowerStrategy(_powerStrategy).getPower(msg.sender);
// _totalPower = _totalPower.add(_powerBalances[msg.sender]);
}else{
_totalPower = _totalSupply;
_powerBalances[msg.sender] = _balances[msg.sender];
}
_lpToken.safeTransfer( msg.sender, amount);
}
}
// File: contracts/reward/UniswapReward.sol
pragma solidity ^0.5.0;
contract UniswapReward is LPTokenWrapper{
using SafeERC20 for IERC20;
IERC20 public _dego = IERC20(0xEE5C75c2f1e8892c84d6d32B730Eff5C4181Bd10);
address public _teamWallet = 0x3D0a845C5ef9741De999FC068f70E2048A489F2b;
address public _rewardPool = 0xEA6dEc98e137a87F78495a8386f7A137408f7722;
uint256 public constant DURATION = 7 days;
uint256 public _initReward = 262500 * 1e18;
uint256 public _startTime = now + 365 days;
uint256 public _periodFinish = 0;
uint256 public _rewardRate = 0;
uint256 public _lastUpdateTime;
uint256 public _rewardPerTokenStored;
uint256 public _teamRewardRate = 500;
uint256 public _poolRewardRate = 1000;
uint256 public _baseRate = 10000;
uint256 public _punishTime = 3 days;
mapping(address => uint256) public _userRewardPerTokenPaid;
mapping(address => uint256) public _rewards;
mapping(address => uint256) public _lastStakedTime;
bool public _hasStart = false;
event RewardAdded(uint256 reward);
event Staked(address indexed user, uint256 amount);
event Withdrawn(address indexed user, uint256 amount);
event RewardPaid(address indexed user, uint256 reward);
modifier updateReward(address account) {
_rewardPerTokenStored = rewardPerToken();
_lastUpdateTime = lastTimeRewardApplicable();
if (account != address(0)) {
_rewards[account] = earned(account);
_userRewardPerTokenPaid[account] = _rewardPerTokenStored;
}
_;
}
/* Fee collection for any other token */
function seize(IERC20 token, uint256 amount) external onlyGovernance{
require(token != _dego, "reward");
require(token != _lpToken, "stake");
token.safeTransfer(_governance, amount);
}
function setTeamRewardRate( uint256 teamRewardRate ) public onlyGovernance{
_teamRewardRate = teamRewardRate;
}
function setPoolRewardRate( uint256 poolRewardRate ) public onlyGovernance{
_poolRewardRate = poolRewardRate;
}
function setWithDrawPunishTime( uint256 punishTime ) public onlyGovernance{
_punishTime = punishTime;
}
function lastTimeRewardApplicable() public view returns (uint256) {
return Math.min(block.timestamp, _periodFinish);
}
function rewardPerToken() public view returns (uint256) {
if (totalPower() == 0) {
return _rewardPerTokenStored;
}
return
_rewardPerTokenStored.add(
lastTimeRewardApplicable()
.sub(_lastUpdateTime)
.mul(_rewardRate)
.mul(1e18)
.div(totalPower())
);
}
function earned(address account) public view returns (uint256) {
return
balanceOfPower(account)
.mul(rewardPerToken().sub(_userRewardPerTokenPaid[account]))
.div(1e18)
.add(_rewards[account]);
}
// stake visibility is public as overriding LPTokenWrapper's stake() function
function stake(uint256 amount, string memory affCode)
public
updateReward(msg.sender)
checkHalve
checkStart
{
require(amount > 0, "Cannot stake 0");
super.stake(amount, affCode);
_lastStakedTime[msg.sender] = now;
emit Staked(msg.sender, amount);
}
function withdraw(uint256 amount)
public
updateReward(msg.sender)
checkHalve
checkStart
{
require(amount > 0, "Cannot withdraw 0");
super.withdraw(amount);
emit Withdrawn(msg.sender, amount);
}
function exit() external {
withdraw(balanceOf(msg.sender));
getReward();
}
function getReward() public updateReward(msg.sender) checkHalve checkStart {
uint256 reward = earned(msg.sender);
if (reward > 0) {
_rewards[msg.sender] = 0;
uint256 fee = IPlayerBook(_playerBook).settleReward(msg.sender, reward);
if(fee > 0){
_dego.safeTransfer(_playerBook, fee);
}
uint256 teamReward = reward.mul(_teamRewardRate).div(_baseRate);
if(teamReward>0){
_dego.safeTransfer(_teamWallet, teamReward);
}
uint256 leftReward = reward.sub(fee).sub(teamReward);
uint256 poolReward = 0;
//withdraw time check
if(now < (_lastStakedTime[msg.sender] + _punishTime) ){
poolReward = leftReward.mul(_poolRewardRate).div(_baseRate);
}
if(poolReward>0){
_dego.safeTransfer(_rewardPool, poolReward);
leftReward = leftReward.sub(poolReward);
}
if(leftReward>0){
_dego.safeTransfer(msg.sender, leftReward );
}
emit RewardPaid(msg.sender, leftReward);
}
}
modifier checkHalve() {
if (block.timestamp >= _periodFinish) {
_initReward = _initReward.mul(50).div(100);
_dego.mint(address(this), _initReward);
_rewardRate = _initReward.div(DURATION);
_periodFinish = block.timestamp.add(DURATION);
emit RewardAdded(_initReward);
}
_;
}
modifier checkStart() {
require(block.timestamp > _startTime, "not start");
_;
}
// set fix time to start reward
function startReward(uint256 startTime)
external
onlyGovernance
updateReward(address(0))
{
require(_hasStart == false, "has started");
_hasStart = true;
_startTime = startTime;
_rewardRate = _initReward.div(DURATION);
_dego.mint(address(this), _initReward);
_lastUpdateTime = _startTime;
_periodFinish = _startTime.add(DURATION);
emit RewardAdded(_initReward);
}
//
//for extra reward
function notifyRewardAmount(uint256 reward)
external
onlyGovernance
updateReward(address(0))
{
IERC20(_dego).safeTransferFrom(msg.sender, address(this), reward);
if (block.timestamp >= _periodFinish) {
_rewardRate = reward.div(DURATION);
} else {
uint256 remaining = _periodFinish.sub(block.timestamp);
uint256 leftover = remaining.mul(_rewardRate);
_rewardRate = reward.add(leftover).div(DURATION);
}
_lastUpdateTime = block.timestamp;
_periodFinish = block.timestamp.add(DURATION);
emit RewardAdded(reward);
}
} | True | [
101,
1013,
1008,
1008,
1008,
1008,
100,
100,
100,
100,
1008,
100,
100,
1008,
100,
100,
100,
100,
100,
1008,
100,
100,
100,
100,
100,
1008,
100,
1008,
100,
100,
100,
100,
1008,
1008,
16770,
1024,
1013,
1013,
2139,
3995,
1012,
5446,
1008,
10210,
6105,
1008,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1008,
1008,
9385,
1006,
1039,
1007,
12609,
2139,
3995,
1008,
1008,
6656,
2003,
2182,
3762,
4379,
1010,
2489,
1997,
3715,
1010,
2000,
2151,
2711,
11381,
1037,
6100,
1008,
1997,
2023,
4007,
1998,
3378,
12653,
6764,
1006,
1996,
1000,
4007,
1000,
1007,
1010,
2000,
3066,
1008,
1999,
1996,
4007,
2302,
16840,
1010,
2164,
2302,
22718,
1996,
2916,
1008,
2000,
2224,
1010,
6100,
1010,
19933,
1010,
13590,
1010,
10172,
1010,
16062,
1010,
4942,
13231,
12325,
1010,
1998,
1013,
2030,
5271,
1008,
4809,
1997,
1996,
4007,
1010,
1998,
2000,
9146,
5381,
2000,
3183,
1996,
4007,
2003,
1008,
19851,
2000,
2079,
2061,
1010,
3395,
2000,
1996,
2206,
3785,
1024,
1008,
1008,
1996,
2682,
9385,
5060,
1998,
2023,
6656,
5060,
4618,
2022,
2443,
1999,
2035,
1008,
4809,
2030,
6937,
8810,
1997,
1996,
4007,
1012,
1008,
1008,
1996,
4007,
2003,
3024,
1000,
2004,
2003,
1000,
1010,
2302,
10943,
2100,
1997,
2151,
2785,
1010,
4671,
2030,
1008,
13339,
1010,
2164,
2021,
2025,
3132,
2000,
1996,
10943,
3111,
1997,
6432,
8010,
1010,
1008,
10516,
2005,
1037,
3327,
3800,
1998,
2512,
2378,
19699,
23496,
3672,
1012,
1999,
2053,
2724,
4618,
1996,
1008,
6048,
2030,
9385,
13304,
2022,
20090,
2005,
2151,
4366,
1010,
12394,
2030,
2060,
1008,
14000,
1010,
3251,
1999,
2019,
2895,
1997,
3206,
1010,
17153,
2102,
2030,
4728,
1010,
17707,
2013,
1010,
1008,
2041,
1997,
2030,
1999,
4434,
2007,
1996,
4007,
2030,
1996,
2224,
2030,
2060,
24069,
1999,
1996,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
8785,
1013,
8785,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3115,
8785,
16548,
4394,
1999,
1996,
5024,
3012,
2653,
1012,
1008,
1013,
3075,
8785,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2922,
1997,
2048,
3616,
1012,
1008,
1013,
3853,
4098,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1028,
1027,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
10479,
1997,
2048,
3616,
1012,
1008,
1013,
3853,
8117,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1026,
1038,
1029,
1037,
1024,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2779,
1997,
2048,
3616,
1012,
1996,
2765,
2003,
8352,
2875,
1008,
5717,
1012,
1008,
1013,
3853,
2779,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
1006,
1037,
1009,
1038,
1007,
1013,
1016,
2064,
2058,
12314,
1010,
2061,
2057,
16062,
2709,
1006,
1037,
1013,
1016,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-29
*/
// SPDX-License-Identifier: Apache-2.0
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC1155/IERC1155.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(address indexed operator, address indexed from, address indexed to, uint256[] ids, uint256[] values);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids) external view returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(address from, address to, uint256 id, uint256 amount, bytes calldata data) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(address from, address to, uint256[] calldata ids, uint256[] calldata amounts, bytes calldata data) external;
}
// File: @openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol
pragma solidity ^0.8.0;
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
)
external
returns(bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
)
external
returns(bytes4);
}
// File: @openzeppelin/contracts/token/ERC1155/extensions/IERC1155MetadataURI.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC1155/ERC1155.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using Address for address;
// Mapping from token ID to account balances
mapping (uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping (address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/**
* @dev See {_setURI}.
*/
constructor (string memory uri_) {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC1155).interfaceId
|| interfaceId == type(IERC1155MetadataURI).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: balance query for the zero address");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(
address[] memory accounts,
uint256[] memory ids
)
public
view
virtual
override
returns (uint256[] memory)
{
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(_msgSender() != operator, "ERC1155: setting approval status for self");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
)
public
virtual
override
{
require(to != address(0), "ERC1155: transfer to the zero address");
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
_balances[id][from] = fromBalance - amount;
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
)
public
virtual
override
{
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
_balances[id][from] = fromBalance - amount;
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `account`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - If `account` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(address account, uint256 id, uint256 amount, bytes memory data) internal virtual {
require(account != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), account, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][account] += amount;
emit TransferSingle(operator, address(0), account, id, amount);
_doSafeTransferAcceptanceCheck(operator, address(0), account, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(address to, uint256[] memory ids, uint256[] memory amounts, bytes memory data) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `account`
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens of token type `id`.
*/
function _burn(address account, uint256 id, uint256 amount) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");
uint256 accountBalance = _balances[id][account];
require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
_balances[id][account] = accountBalance - amount;
emit TransferSingle(operator, account, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(address account, uint256[] memory ids, uint256[] memory amounts) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), ids, amounts, "");
for (uint i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 accountBalance = _balances[id][account];
require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
_balances[id][account] = accountBalance - amount;
}
emit TransferBatch(operator, account, address(0), ids, amounts);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
)
internal
virtual
{ }
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
)
private
{
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver(to).onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
)
private
{
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (bytes4 response) {
if (response != IERC1155Receiver(to).onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
// File: contracts/CyberManufacturerCoNFT.sol
pragma solidity ^0.8.4;
contract CyberManufacturerCoNFT is ERC1155 {
address _admin;
uint32 coolingPeriod;
string creator;
mapping(uint256 => uint256) coolingTimes;
mapping(uint256 => string) metadataUris;
event CyberManufacturerCoMint(uint256 id, uint256 amount, string metadataUri, address initialOwner, bytes data);
event CyberManufacturerCoBurn(uint256 id, uint256 amount, address account);
event CyberManufacturerCoTransfer(uint256 id, uint256 amount, address from, address to);
event CyberManufacturerCoSetup(uint32 coolingPeriod_, string creator_);
// not using default uri scheme
constructor(uint32 coolingPeriod_, string memory creator_) ERC1155(""){
coolingPeriod = coolingPeriod_;
creator = creator_;
_admin = msg.sender;
emit CyberManufacturerCoSetup(coolingPeriod_, creator_);
}
modifier isAdmin(){
require(msg.sender == _admin, "only admin can do this");
_;
}
modifier nonExist(uint256 id){
require(coolingTimes[id] == 0, "NFT already exists");
_;
}
modifier isStillHot(uint256 id){
require(coolingTimes[id] >= block.timestamp, "NFT already became immutable");
_;
}
function mint(uint256 id, uint256 amount, string memory metadataUri, address initialOwner, bytes calldata data) public isAdmin() nonExist(id) {
coolingTimes[id] = block.timestamp + coolingPeriod;
metadataUris[id] = metadataUri;
ERC1155._mint(initialOwner, id, amount, data);
emit CyberManufacturerCoMint(id, amount, metadataUri, initialOwner, data);
}
function burn(uint256 id, uint256 amount, address account) public isAdmin() isStillHot(id) {
ERC1155._burn(account, id, amount);
emit CyberManufacturerCoBurn(id, amount, account);
}
function setUri(uint256 id, string memory uri_) public isAdmin() isStillHot(id) {
metadataUris[id] = uri_;
}
function transferAdmin(address newAdmin) public isAdmin() {
_admin = newAdmin;
}
function uri(uint256 id) override public view returns (string memory){
return metadataUris[id];
}
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) override internal {
for (uint i = 0; i < ids.length; i++) {
emit CyberManufacturerCoTransfer(ids[i], amounts[i], from, to);
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2756,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
15895,
1011,
1016,
1012,
1014,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
14526,
24087,
1013,
29464,
11890,
14526,
24087,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
14526,
24087,
24577,
3206,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
10630,
2629,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1015,
1012,
1035,
1008,
1013,
8278,
29464,
11890,
14526,
24087,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3643,
1036,
19204,
2015,
1997,
19204,
2828,
1036,
8909,
1036,
2024,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
2011,
1036,
6872,
1036,
1012,
1008,
1013,
2724,
15210,
2075,
2571,
1006,
4769,
25331,
6872,
1010,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
8909,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5662,
2000,
3674,
1063,
15210,
2075,
2571,
1065,
2824,
1010,
2073,
1036,
6872,
1036,
1010,
1036,
2013,
1036,
1998,
1036,
2000,
1036,
2024,
1996,
2168,
2005,
2035,
1008,
15210,
1012,
1008,
1013,
2724,
4651,
14479,
2818,
1006,
4769,
25331,
6872,
1010,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-14
*/
/**
*Submitted for verification at Etherscan.io on 2022-03-14
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8;
contract StakingRewards {
IERC20 public rewardsToken;
IERC20 public stakingToken;
uint public rewardRate;
uint public lastUpdateTime;
uint public rewardPerTokenStored;
address public owner;
mapping(address => uint) public userRewardPerTokenPaid;
mapping(address => uint) public rewards;
uint private _totalSupply;
mapping(address => uint) private _balances;
constructor(address _token,uint _rewardrate) {
stakingToken = IERC20(_token);
rewardsToken = IERC20(_token);
rewardRate=_rewardrate;
owner=(msg.sender);
}
function setRewardRate(uint _rate) public {
require(owner==msg.sender,"Owner Only accesable");
rewardRate=_rate;
}
function ClaimRewards(uint _amount) public {
require(owner==msg.sender,"Owner Only accesable");
rewardsToken.transfer(msg.sender, _amount);
}
function rewardPerToken() public view returns (uint) {
if (_totalSupply == 0) {
return 0;
}
return
rewardPerTokenStored +
(((block.timestamp - lastUpdateTime) * rewardRate * 1e9) / _totalSupply);
}
function earned(address account) public view returns (uint) {
return
((_balances[account] *
(rewardPerToken() - userRewardPerTokenPaid[account])) / 1e9) +
rewards[account];
}
modifier updateReward(address account) {
rewardPerTokenStored = rewardPerToken();
lastUpdateTime = block.timestamp;
rewards[account] = earned(account);
userRewardPerTokenPaid[account] = rewardPerTokenStored;
_;
}
function deposit(uint _amount) external updateReward(msg.sender) {
_totalSupply += _amount;
_balances[msg.sender] += _amount;
stakingToken.transferFrom(msg.sender, address(this), _amount);
}
function withdraw() external updateReward(msg.sender) {
uint _amount = _balances[msg.sender];
_totalSupply -= _amount;
_balances[msg.sender] =0;
stakingToken.transfer(msg.sender, _amount);
uint reward = rewards[msg.sender];
rewards[msg.sender] = 0;
rewardsToken.transfer(msg.sender, reward);
}
function getReward() external updateReward(msg.sender) {
uint reward = rewards[msg.sender];
rewards[msg.sender] = 0;
rewardsToken.transfer(msg.sender, reward);
}
}
interface IERC20 {
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2403,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2403,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1025,
3206,
2358,
15495,
15603,
18117,
1063,
29464,
11890,
11387,
2270,
19054,
18715,
2368,
1025,
29464,
11890,
11387,
2270,
2358,
15495,
18715,
2368,
1025,
21318,
3372,
2270,
10377,
11657,
1025,
21318,
3372,
2270,
2197,
6279,
13701,
7292,
1025,
21318,
3372,
2270,
10377,
4842,
18715,
6132,
19277,
2094,
1025,
4769,
2270,
3954,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2270,
5310,
15603,
4232,
4842,
18715,
2368,
4502,
3593,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2270,
19054,
1025,
21318,
3372,
2797,
1035,
21948,
6279,
22086,
1025,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2797,
1035,
5703,
2015,
1025,
9570,
2953,
1006,
4769,
1035,
19204,
1010,
21318,
3372,
1035,
10377,
11657,
1007,
1063,
2358,
15495,
18715,
2368,
1027,
29464,
11890,
11387,
1006,
1035,
19204,
1007,
1025,
19054,
18715,
2368,
1027,
29464,
11890,
11387,
1006,
1035,
19204,
1007,
1025,
10377,
11657,
1027,
1035,
10377,
11657,
1025,
3954,
1027,
1006,
5796,
2290,
1012,
4604,
2121,
1007,
1025,
1065,
3853,
2275,
15603,
4232,
11657,
1006,
21318,
3372,
1035,
3446,
1007,
2270,
1063,
5478,
1006,
3954,
1027,
1027,
5796,
2290,
1012,
4604,
2121,
1010,
1000,
3954,
2069,
16222,
22447,
3468,
1000,
1007,
1025,
10377,
11657,
1027,
1035,
3446,
1025,
1065,
3853,
4366,
15603,
18117,
1006,
21318,
3372,
1035,
3815,
1007,
2270,
1063,
5478,
1006,
3954,
1027,
1027,
5796,
2290,
1012,
4604,
2121,
1010,
1000,
3954,
2069,
16222,
22447,
3468,
1000,
1007,
1025,
19054,
18715,
2368,
1012,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
1035,
3815,
1007,
1025,
1065,
3853,
10377,
4842,
18715,
2368,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2065,
1006,
1035,
21948,
6279,
22086,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
2709,
10377,
4842,
18715,
6132,
19277,
2094,
1009,
1006,
1006,
1006,
3796,
1012,
2335,
15464,
2361,
1011,
2197,
6279,
13701,
7292,
1007,
1008,
10377,
11657,
1008,
1015,
2063,
2683,
1007,
1013,
1035,
21948,
6279,
22086,
1007,
1025,
1065,
3853,
3687,
1006,
4769,
4070,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
1006,
1006,
1035,
5703,
2015,
1031,
4070,
1033,
1008,
1006,
10377,
4842,
18715,
2368,
1006,
1007,
1011,
5310,
15603,
4232,
4842,
18715,
2368,
4502,
3593,
1031,
4070,
1033,
1007,
1007,
1013,
1015,
2063,
2683,
1007,
1009,
19054,
1031,
4070,
1033,
1025,
1065,
16913,
18095,
10651,
15603,
4232,
1006,
4769,
4070,
1007,
1063,
10377,
4842,
18715,
6132,
19277,
2094,
1027,
10377,
4842,
18715,
2368,
1006,
1007,
1025,
2197,
6279,
13701,
7292,
1027,
3796,
1012,
2335,
15464,
2361,
1025,
19054,
1031,
4070,
1033,
1027,
3687,
1006,
4070,
1007,
1025,
5310,
15603,
4232,
4842,
18715,
2368,
4502,
3593,
1031,
4070,
1033,
1027,
10377,
4842,
18715,
6132,
19277,
2094,
1025,
1035,
1025,
1065,
3853,
12816,
1006,
21318,
3372,
1035,
3815,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-02-17
*/
//SPDX-License-Identifier: Unlicense
pragma solidity 0.8.1;
// bigshortbets.com collection contract
contract BigShortBets {
//minimum to collect
uint256 constant public minETH = 1000 ether;
//maximum pay-in w/o AML/KYC
uint256 constant public noAmlMax = 9 ether;
//list of balances
mapping(address => uint256) private balances;
//you-know-who
address constant public owner = 0x23E7f318C383a5e9af702EE11e342632006A23Cc;
//flags
bool collectEnd = false;
bool failed = false;
// now + 6 months
uint256 constant public failsafe = 1629155926;
//pay in - just send ETH to contract address
receive() external payable {
require(!collectEnd, "Collect ended");
uint256 amount = msg.value + balances[msg.sender];
//if you want pay in more than 9 ETH - contact staff to KYC/AML
//and pay directly to owner address
//not KYC/AML-ed payments will be treated as a donation
require(amount <= noAmlMax, "Need KYC/AML");
balances[msg.sender] = amount;
//fail in case that somethig* happend and collection not closed in 6 months
if (block.timestamp > failsafe) {
collectEnd = true;
failed = true;
}
//*ie you-know-who dies
}
//check balance paid in - will be needed for token distribution
function blanceOf(address user) external view returns (uint256) {
return balances[user];
}
//total collected by this contract and KYC/AML-ed collect to owner address
function totalCollected() public view returns (uint256) {
return address(this).balance + address(owner).balance;
}
//withdraw ETH if collection failed
function withdraw() external {
require(failed, "Collect not failed");
uint256 amount = balances[msg.sender];
balances[msg.sender] = 0;
send(msg.sender, amount);
}
//end collecting - take ETH or fail and allow to withdraw
function end() external {
require(!collectEnd, "Collect ended");
collectEnd = true;
require(msg.sender == owner, "Only for owner");
if (totalCollected() < minETH) {
failed = true;
} else {
send(owner, address(this).balance);
}
}
//internal "gas safe" ETH send function
function send(address user, uint256 amount) private {
bool success = false;
(success, ) = address(user).call{value: amount}("");
require(success, "Send failed");
}
}
//rav3n_pl was here | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6185,
1011,
2459,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
12325,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1015,
1025,
1013,
1013,
2502,
22231,
5339,
20915,
2015,
1012,
4012,
3074,
3206,
3206,
2502,
22231,
5339,
20915,
2015,
1063,
1013,
1013,
6263,
2000,
8145,
21318,
3372,
17788,
2575,
5377,
2270,
3067,
2705,
1027,
6694,
28855,
1025,
1013,
1013,
4555,
3477,
1011,
1999,
1059,
1013,
1051,
2572,
2140,
1013,
18712,
2278,
21318,
3372,
17788,
2575,
5377,
2270,
2053,
3286,
19145,
2595,
1027,
1023,
28855,
1025,
1013,
1013,
2862,
1997,
5703,
2015,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2797,
5703,
2015,
1025,
1013,
1013,
2017,
1011,
2113,
1011,
2040,
4769,
5377,
2270,
3954,
1027,
1014,
2595,
21926,
2063,
2581,
2546,
21486,
2620,
2278,
22025,
2509,
2050,
2629,
2063,
2683,
10354,
19841,
2475,
4402,
14526,
2063,
22022,
23833,
16703,
8889,
2575,
2050,
21926,
9468,
1025,
1013,
1013,
9245,
22017,
2140,
8145,
10497,
1027,
6270,
1025,
22017,
2140,
3478,
1027,
6270,
1025,
1013,
1013,
2085,
1009,
1020,
2706,
21318,
3372,
17788,
2575,
5377,
2270,
11896,
10354,
2063,
1027,
27882,
16068,
28154,
23833,
1025,
1013,
1013,
3477,
1999,
1011,
2074,
4604,
3802,
2232,
2000,
3206,
4769,
4374,
1006,
1007,
6327,
3477,
3085,
1063,
5478,
1006,
999,
8145,
10497,
1010,
1000,
8145,
3092,
1000,
1007,
1025,
21318,
3372,
17788,
2575,
3815,
1027,
5796,
2290,
1012,
3643,
1009,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1025,
1013,
1013,
2065,
2017,
2215,
3477,
1999,
2062,
2084,
1023,
3802,
2232,
1011,
3967,
3095,
2000,
18712,
2278,
1013,
2572,
2140,
1013,
1013,
1998,
3477,
3495,
2000,
3954,
4769,
1013,
1013,
2025,
18712,
2278,
1013,
2572,
2140,
1011,
3968,
10504,
2097,
2022,
5845,
2004,
1037,
13445,
5478,
1006,
3815,
1026,
1027,
2053,
3286,
19145,
2595,
1010,
1000,
2342,
18712,
2278,
1013,
2572,
2140,
1000,
1007,
1025,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1027,
3815,
1025,
1013,
1013,
8246,
1999,
2553,
2008,
2070,
15222,
2290,
1008,
4148,
2094,
1998,
3074,
2025,
2701,
1999,
1020,
2706,
2065,
1006,
3796,
1012,
2335,
15464,
2361,
1028,
11896,
10354,
2063,
1007,
1063,
8145,
10497,
1027,
2995,
1025,
3478,
1027,
2995,
1025,
1065,
1013,
1013,
1008,
29464,
2017,
1011,
2113,
1011,
2040,
8289,
1065,
1013,
1013,
4638,
5703,
3825,
1999,
1011,
2097,
2022,
2734,
2005,
19204,
4353,
3853,
18698,
8780,
2546,
1006,
4769,
5310,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
5703,
2015,
1031,
5310,
1033,
1025,
1065,
1013,
1013,
2561,
5067,
2011,
2023,
3206,
1998,
18712,
2278,
1013,
2572,
2140,
1011,
3968,
8145,
2000,
3954,
4769,
3853,
2561,
26895,
22471,
2098,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4769,
1006,
2023,
1007,
1012,
5703,
1009,
4769,
1006,
3954,
1007,
1012,
5703,
1025,
1065,
1013,
1013,
10632,
3802,
2232,
2065,
3074,
3478,
3853,
10632,
1006,
1007,
6327,
1063,
5478,
1006,
3478,
1010,
1000,
8145,
2025,
3478,
1000,
1007,
1025,
21318,
3372,
17788,
2575,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/*! silkroad.sol | (c) 2018 Develop by BelovITLab LLC (smartcontract.ru), author @stupidlovejoy | License: MIT */
pragma solidity 0.4.24;
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns(uint256 c) {
if(a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns(uint256) {
return a / b;
}
function sub(uint256 a, uint256 b) internal pure returns(uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns(uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
contract Ownable {
address public owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
modifier onlyOwner() { require(msg.sender == owner); _; }
constructor() public {
owner = msg.sender;
}
function _transferOwnership(address _newOwner) internal {
require(_newOwner != address(0));
emit OwnershipTransferred(owner, _newOwner);
owner = _newOwner;
}
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(owner);
owner = address(0);
}
function transferOwnership(address _newOwner) public onlyOwner {
_transferOwnership(_newOwner);
}
}
contract ERC20 {
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
function totalSupply() public view returns(uint256);
function balanceOf(address who) public view returns(uint256);
function transfer(address to, uint256 value) public returns(bool);
function transferFrom(address from, address to, uint256 value) public returns(bool);
function allowance(address owner, address spender) public view returns(uint256);
function approve(address spender, uint256 value) public returns(bool);
}
contract StandardToken is ERC20 {
using SafeMath for uint256;
uint256 totalSupply_;
string public name;
string public symbol;
uint8 public decimals;
mapping(address => uint256) balances;
mapping(address => mapping(address => uint256)) internal allowed;
constructor(string _name, string _symbol, uint8 _decimals) public {
name = _name;
symbol = _symbol;
decimals = _decimals;
}
function totalSupply() public view returns(uint256) {
return totalSupply_;
}
function balanceOf(address _owner) public view returns(uint256) {
return balances[_owner];
}
function transfer(address _to, uint256 _value) public returns(bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
function multiTransfer(address[] _to, uint256[] _value) public returns(bool) {
require(_to.length == _value.length);
for(uint i = 0; i < _to.length; i++) {
transfer(_to[i], _value[i]);
}
return true;
}
function transferFrom(address _from, address _to, uint256 _value) public returns(bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
function allowance(address _owner, address _spender) public view returns(uint256) {
return allowed[_owner][_spender];
}
function approve(address _spender, uint256 _value) public returns(bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function increaseApproval(address _spender, uint _addedValue) public returns(bool) {
allowed[msg.sender][_spender] = (allowed[msg.sender][_spender].add(_addedValue));
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval(address _spender, uint _subtractedValue) public returns(bool) {
uint oldValue = allowed[msg.sender][_spender];
if(_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
}
else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
contract MintableToken is StandardToken, Ownable {
bool public mintingFinished = false;
event Mint(address indexed to, uint256 amount);
event MintFinished();
modifier canMint() { require(!mintingFinished); _; }
modifier hasMintPermission() { require(msg.sender == owner); _; }
function mint(address _to, uint256 _amount) hasMintPermission canMint public returns(bool) {
totalSupply_ = totalSupply_.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Mint(_to, _amount);
emit Transfer(address(0), _to, _amount);
return true;
}
function finishMinting() onlyOwner canMint public returns(bool) {
mintingFinished = true;
emit MintFinished();
return true;
}
}
contract CappedToken is MintableToken {
uint256 public cap;
constructor(uint256 _cap) public {
require(_cap > 0);
cap = _cap;
}
function mint(address _to, uint256 _amount) public returns(bool) {
require(totalSupply_.add(_amount) <= cap);
return super.mint(_to, _amount);
}
}
contract BurnableToken is StandardToken {
event Burn(address indexed burner, uint256 value);
function _burn(address _who, uint256 _value) internal {
require(_value <= balances[_who]);
balances[_who] = balances[_who].sub(_value);
totalSupply_ = totalSupply_.sub(_value);
emit Burn(_who, _value);
emit Transfer(_who, address(0), _value);
}
function burn(uint256 _value) public {
_burn(msg.sender, _value);
}
function burnFrom(address _from, uint256 _value) public {
require(_value <= allowed[_from][msg.sender]);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
_burn(_from, _value);
}
}
contract Withdrawable is Ownable {
function withdrawEther(address _to, uint _value) onlyOwner public {
require(_to != address(0));
require(address(this).balance >= _value);
_to.transfer(_value);
}
function withdrawTokensTransfer(ERC20 _token, address _to, uint256 _value) onlyOwner public {
require(_token.transfer(_to, _value));
}
function withdrawTokensTransferFrom(ERC20 _token, address _from, address _to, uint256 _value) onlyOwner public {
require(_token.transferFrom(_from, _to, _value));
}
function withdrawTokensApprove(ERC20 _token, address _spender, uint256 _value) onlyOwner public {
require(_token.approve(_spender, _value));
}
}
contract Pausable is Ownable {
bool public paused = false;
event Pause();
event Unpause();
modifier whenNotPaused() { require(!paused); _; }
modifier whenPaused() { require(paused); _; }
function pause() onlyOwner whenNotPaused public {
paused = true;
emit Pause();
}
function unpause() onlyOwner whenPaused public {
paused = false;
emit Unpause();
}
}
contract Manageable is Ownable {
address[] public managers;
event ManagerAdded(address indexed manager);
event ManagerRemoved(address indexed manager);
modifier onlyManager() { require(isManager(msg.sender)); _; }
function countManagers() view public returns(uint) {
return managers.length;
}
function getManagers() view public returns(address[]) {
return managers;
}
function isManager(address _manager) view public returns(bool) {
for(uint i = 0; i < managers.length; i++) {
if(managers[i] == _manager) {
return true;
}
}
return false;
}
function addManager(address _manager) onlyOwner public {
require(_manager != address(0));
require(!isManager(_manager));
managers.push(_manager);
emit ManagerAdded(_manager);
}
function removeManager(address _manager) onlyOwner public {
require(isManager(_manager));
uint index = 0;
for(uint i = 0; i < managers.length; i++) {
if(managers[i] == _manager) {
index = i;
}
}
for(; index < managers.length - 1; index++) {
managers[index] = managers[index + 1];
}
managers.length--;
emit ManagerRemoved(_manager);
}
}
contract RewardToken is StandardToken, Ownable {
struct Payment {
uint time;
uint amount;
}
Payment[] public repayments;
mapping(address => Payment[]) public rewards;
event Repayment(address indexed from, uint256 time, uint256 amount);
event Reward(address indexed to, uint256 time, uint256 amount);
function repayment() onlyOwner payable public {
require(msg.value >= 0.01 * 1 ether);
repayments.push(Payment({time : now, amount : msg.value}));
emit Repayment(msg.sender, now, msg.value);
}
function _reward(address _to) private returns(bool) {
if(rewards[_to].length < repayments.length) {
uint sum = 0;
for(uint i = rewards[_to].length; i < repayments.length; i++) {
uint amount = balances[_to] > 0 ? (repayments[i].amount.mul(balances[_to]).div(totalSupply_)) : 0;
rewards[_to].push(Payment({time : now, amount : amount}));
sum = sum.add(amount);
}
if(sum > 0) {
_to.transfer(sum);
emit Reward(_to, now, sum);
}
return true;
}
return false;
}
function reward() public returns(bool) {
return _reward(msg.sender);
}
function availableReward(address _to) public view returns(uint256 value) {
if(rewards[_to].length < repayments.length && balances[_to] > 0) {
uint sum = 0;
for(uint i = rewards[_to].length; i < repayments.length; i++) {
sum = sum.add(repayments[i].amount.mul(balances[_to]).div(totalSupply_));
}
return sum;
}
return 0;
}
function transfer(address _to, uint256 _value) public returns(bool) {
_reward(msg.sender);
_reward(_to);
return super.transfer(_to, _value);
}
function transferFrom(address _from, address _to, uint256 _value) public returns(bool) {
_reward(_from);
_reward(_to);
return super.transferFrom(_from, _to, _value);
}
}
/*
ICO Silkroadmining
*/
contract Token is CappedToken, BurnableToken, RewardToken, Withdrawable {
constructor() CappedToken(1000000 * 1e8) StandardToken("SILK", "SILK", 8) public {
}
}
contract Crowdsale is Manageable, Withdrawable, Pausable {
using SafeMath for uint;
Token public token;
bool public crowdsaleClosed = false;
event ExternalPurchase(address indexed holder, string tx, string currency, uint256 currencyAmount, uint256 rateToEther, uint256 tokenAmount);
event CrowdsaleClose();
constructor() public {
token = new Token();
addManager(0x915c517cB57fAB7C532262cB9f109C875bEd7d18);
}
function externalPurchase(address _to, string _tx, string _currency, uint _value, uint256 _rate, uint256 _tokens) whenNotPaused onlyManager public {
token.mint(_to, _tokens);
emit ExternalPurchase(_to, _tx, _currency, _value, _rate, _tokens);
}
function closeCrowdsale(address _to) onlyOwner public {
require(!crowdsaleClosed);
token.finishMinting();
token.transferOwnership(_to);
crowdsaleClosed = true;
emit CrowdsaleClose();
}
} | True | [
101,
1013,
1008,
999,
6953,
3217,
4215,
1012,
14017,
1064,
1006,
1039,
1007,
2760,
4503,
2011,
19337,
4492,
4183,
20470,
11775,
1006,
6047,
8663,
6494,
6593,
1012,
21766,
1007,
1010,
3166,
1030,
5236,
14301,
20518,
6977,
1064,
6105,
1024,
10210,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1018,
1012,
2484,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
1037,
1013,
1038,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
2724,
6095,
7389,
23709,
11788,
1006,
4769,
25331,
3025,
12384,
2121,
1007,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
4722,
1063,
5478,
1006,
1035,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
1035,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
7389,
23709,
11788,
1006,
3954,
1007,
1025,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
2047,
12384,
2121,
1007,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
1063,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-01-02
*/
pragma solidity ^0.8.10;
// SPDX-License-Identifier: Unlicensed
interface IERC20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return payable(msg.sender);
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{value: weiValue}(
data
);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = block.timestamp + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(
_previousOwner == msg.sender,
"You don't have permission to unlock"
);
require(block.timestamp > _lockTime, "Contract is locked until a later date");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
_previousOwner = address(0);
}
}
// pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function allPairsLength() external view returns (uint256);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Transfer(address indexed from, address indexed to, uint256 value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address owner) external view returns (uint256);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 value) external returns (bool);
function transfer(address to, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint256);
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
event Mint(address indexed sender, uint256 amount0, uint256 amount1);
event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint256);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);
function price0CumulativeLast() external view returns (uint256);
function price1CumulativeLast() external view returns (uint256);
function kLast() external view returns (uint256);
function mint(address to) external returns (uint256 liquidity);
function burn(address to)
external
returns (uint256 amount0, uint256 amount1);
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function removeLiquidity(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETHWithPermit(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountToken, uint256 amountETH);
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);
function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);
function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);
function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);
function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
contract Demeuro is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
mapping(address => bool) private _isExcluded;
address[] private _excluded;
mapping(address => bool) private _isBlackListedBot;
mapping(address => bool) private _isExcludedFromLimit;
address[] private _blackListedBots;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
address payable public _marketingAddress =
payable(address(0x954D5FbF4a71f2E14D52A98923E166D440341Bab));
address payable public _devwallet =
payable(address(0xe922c94161D45bdD31433B3c7B912aD214D399Ce));
address public _exchangewallet =
payable(address(0xf6d8e88B3682Ef1fEf838841b55F1e8B9E7cEE7A));
address _partnershipswallet =
payable(address(0x711AC4D63246cb106104b73fd9cF82c59f4F4d9a));
address private _donationAddress =
0x000000000000000000000000000000000000dEaD;
string private _name = "Demeuro";
string private _symbol = "DEMEURO";
uint8 private _decimals = 9;
struct BuyFee {
uint16 tax;
uint16 liquidity;
uint16 marketing;
uint16 dev;
uint16 donation;
}
struct SellFee {
uint16 tax;
uint16 liquidity;
uint16 marketing;
uint16 dev;
uint16 donation;
}
BuyFee public buyFee;
SellFee public sellFee;
uint16 private _taxFee;
uint16 private _liquidityFee;
uint16 private _marketingFee;
uint16 private _devFee;
uint16 private _donationFee;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
uint256 public _maxTxAmount = 5000000 * 10**3 * 10**9;
uint256 private numTokensSellToAddToLiquidity = 5000000 * 10**3 * 10**9;
uint256 public _maxWalletSize = 10000000 * 10**3 * 10**9;
event botAddedToBlacklist(address account);
event botRemovedFromBlacklist(address account);
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap() {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
buyFee.tax = 0;
buyFee.liquidity = 47;
buyFee.marketing = 48;
buyFee.dev = 0;
buyFee.donation = 0;
sellFee.tax = 0;
sellFee.liquidity = 47;
sellFee.marketing = 48;
sellFee.dev = 0;
sellFee.donation = 0;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
// exclude owner, dev wallet, and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_marketingAddress] = true;
_isExcludedFromFee[_devwallet] = true;
_isExcludedFromFee[_exchangewallet] = true;
_isExcludedFromFee[_partnershipswallet] = true;
_isExcludedFromLimit[_marketingAddress] = true;
_isExcludedFromLimit[_devwallet] = true;
_isExcludedFromLimit[_exchangewallet] = true;
_isExcludedFromLimit[_partnershipswallet] = true;
_isExcludedFromLimit[owner()] = true;
_isExcludedFromLimit[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].add(addedValue)
);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].sub(
subtractedValue,
"ERC20: decreased allowance below zero"
)
);
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function donationAddress() public view returns (address) {
return _donationAddress;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(
!_isExcluded[sender],
"Excluded addresses cannot call this function"
);
(
,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet,
uint256 tDonation
) = _getTValues(tAmount);
(uint256 rAmount, , ) = _getRValues(
tAmount,
tFee,
tLiquidity,
tWallet,
tDonation,
_getRate()
);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee)
public
view
returns (uint256)
{
require(tAmount <= _tTotal, "Amount must be less than supply");
(
,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet,
uint256 tDonation
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, ) = _getRValues(
tAmount,
tFee,
tLiquidity,
tWallet,
tDonation,
_getRate()
);
if (!deductTransferFee) {
return rAmount;
} else {
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount)
public
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function updateMarketingWallet(address payable newAddress) external onlyOwner {
_marketingAddress = newAddress;
}
function updateDevWallet(address payable newAddress) external onlyOwner {
_devwallet = newAddress;
}
function updateExchangeWallet(address newAddress) external onlyOwner {
_exchangewallet = newAddress;
}
function updatePartnershipsWallet(address newAddress) external onlyOwner {
_partnershipswallet = newAddress;
}
function addBotToBlacklist(address account) external onlyOwner {
require(
account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D,
"We cannot blacklist UniSwap router"
);
require(!_isBlackListedBot[account], "Account is already blacklisted");
_isBlackListedBot[account] = true;
_blackListedBots.push(account);
}
function removeBotFromBlacklist(address account) external onlyOwner {
require(_isBlackListedBot[account], "Account is not blacklisted");
for (uint256 i = 0; i < _blackListedBots.length; i++) {
if (_blackListedBots[i] == account) {
_blackListedBots[i] = _blackListedBots[
_blackListedBots.length - 1
];
_isBlackListedBot[account] = false;
_blackListedBots.pop();
break;
}
}
}
function excludeFromReward(address account) public onlyOwner {
require(!_isExcluded[account], "Account is already excluded");
if (_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner {
require(_isExcluded[account], "Account is not excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function excludeFromLimit(address account) public onlyOwner {
_isExcludedFromLimit[account] = true;
}
function includeInLimit(address account) public onlyOwner {
_isExcludedFromLimit[account] = false;
}
function setSellFee(
uint16 tax,
uint16 liquidity,
uint16 marketing,
uint16 dev,
uint16 donation
) external onlyOwner {
sellFee.tax = tax;
sellFee.marketing = marketing;
sellFee.liquidity = liquidity;
sellFee.dev = dev;
sellFee.donation = donation;
}
function setBuyFee(
uint16 tax,
uint16 liquidity,
uint16 marketing,
uint16 dev,
uint16 donation
) external onlyOwner {
buyFee.tax = tax;
buyFee.marketing = marketing;
buyFee.liquidity = liquidity;
buyFee.dev = dev;
buyFee.donation = donation;
}
function setBothFees(
uint16 buy_tax,
uint16 buy_liquidity,
uint16 buy_marketing,
uint16 buy_dev,
uint16 buy_donation,
uint16 sell_tax,
uint16 sell_liquidity,
uint16 sell_marketing,
uint16 sell_dev,
uint16 sell_donation
) external onlyOwner {
buyFee.tax = buy_tax;
buyFee.marketing = buy_marketing;
buyFee.liquidity = buy_liquidity;
buyFee.dev = buy_dev;
buyFee.donation = buy_donation;
sellFee.tax = sell_tax;
sellFee.marketing = sell_marketing;
sellFee.liquidity = sell_liquidity;
sellFee.dev = sell_dev;
sellFee.donation = sell_donation;
}
function setNumTokensSellToAddToLiquidity(uint256 numTokens) external onlyOwner {
numTokensSellToAddToLiquidity = numTokens;
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(10**3);
}
function _setMaxWalletSizePercent(uint256 maxWalletSize)
external
onlyOwner
{
_maxWalletSize = _tTotal.mul(maxWalletSize).div(10**3);
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to recieve ETH from uniswapV2Router when swapping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getTValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256
)
{
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tWallet = calculateMarketingFee(tAmount) +
calculateDevFee(tAmount);
uint256 tDonation = calculateDonationFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
tTransferAmount = tTransferAmount.sub(tWallet);
tTransferAmount = tTransferAmount.sub(tDonation);
return (tTransferAmount, tFee, tLiquidity, tWallet, tDonation);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet,
uint256 tDonation,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rWallet = tWallet.mul(currentRate);
uint256 rDonation = tDonation.mul(currentRate);
uint256 rTransferAmount = rAmount
.sub(rFee)
.sub(rLiquidity)
.sub(rWallet)
.sub(rDonation);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (
_rOwned[_excluded[i]] > rSupply ||
_tOwned[_excluded[i]] > tSupply
) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if (_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function _takeWalletFee(uint256 tWallet) private {
uint256 currentRate = _getRate();
uint256 rWallet = tWallet.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rWallet);
if (_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tWallet);
}
function _takeDonationFee(uint256 tDonation) private {
uint256 currentRate = _getRate();
uint256 rDonation = tDonation.mul(currentRate);
_rOwned[_donationAddress] = _rOwned[_donationAddress].add(rDonation);
if (_isExcluded[_donationAddress])
_tOwned[_donationAddress] = _tOwned[_donationAddress].add(
tDonation
);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(10**2);
}
function calculateLiquidityFee(uint256 _amount)
private
view
returns (uint256)
{
return _amount.mul(_liquidityFee).div(10**2);
}
function calculateMarketingFee(uint256 _amount)
private
view
returns (uint256)
{
return _amount.mul(_marketingFee).div(10**2);
}
function calculateDonationFee(uint256 _amount)
private
view
returns (uint256)
{
return _amount.mul(_donationFee).div(10**2);
}
function calculateDevFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_devFee).div(10**2);
}
function removeAllFee() private {
_taxFee = 0;
_liquidityFee = 0;
_marketingFee = 0;
_donationFee = 0;
_devFee = 0;
}
function setBuy() private {
_taxFee = buyFee.tax;
_liquidityFee = buyFee.liquidity;
_marketingFee = buyFee.marketing;
_donationFee = buyFee.donation;
_devFee = buyFee.dev;
}
function setSell() private {
_taxFee = sellFee.tax;
_liquidityFee = sellFee.liquidity;
_marketingFee = sellFee.marketing;
_donationFee = sellFee.donation;
_devFee = sellFee.dev;
}
function isExcludedFromFee(address account) public view returns (bool) {
return _isExcludedFromFee[account];
}
function isExcludedFromLimit(address account) public view returns (bool) {
return _isExcludedFromLimit[account];
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlackListedBot[from], "You are blacklisted");
require(!_isBlackListedBot[msg.sender], "blacklisted");
require(!_isBlackListedBot[tx.origin], "blacklisted");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if (contractTokenBalance >= _maxTxAmount) {
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >=
numTokensSellToAddToLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if (_isExcludedFromFee[from] || _isExcludedFromFee[to]) {
takeFee = false;
}
if (takeFee) {
if (!_isExcludedFromLimit[from] && !_isExcludedFromLimit[to]) {
require(
amount <= _maxTxAmount,
"Transfer amount exceeds the maxTxAmount."
);
if (to != uniswapV2Pair) {
require(
amount + balanceOf(to) <= _maxWalletSize,
"Recipient exceeds max wallet size."
);
}
}
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from, to, amount, takeFee);
}
function swapAndLiquify(uint256 tokens) private lockTheSwap {
// Split the contract balance into halves
uint256 denominator = (buyFee.liquidity +
sellFee.liquidity +
buyFee.marketing +
sellFee.marketing +
buyFee.dev +
sellFee.dev) * 2;
uint256 tokensToAddLiquidityWith = (tokens *
(buyFee.liquidity + sellFee.liquidity)) / denominator;
uint256 toSwap = tokens - tokensToAddLiquidityWith;
uint256 initialBalance = address(this).balance;
swapTokensForEth(toSwap);
uint256 deltaBalance = address(this).balance - initialBalance;
uint256 unitBalance = deltaBalance /
(denominator - (buyFee.liquidity + sellFee.liquidity));
uint256 bnbToAddLiquidityWith = unitBalance *
(buyFee.liquidity + sellFee.liquidity);
if (bnbToAddLiquidityWith > 0) {
// Add liquidity to pancake
addLiquidity(tokensToAddLiquidityWith, bnbToAddLiquidityWith);
}
// Send ETH to marketing
uint256 marketingAmt = unitBalance *
2 *
(buyFee.marketing + sellFee.marketing);
uint256 devAmt = unitBalance * 2 * (buyFee.dev + sellFee.dev) >
address(this).balance
? address(this).balance
: unitBalance * 2 * (buyFee.dev + sellFee.dev);
if (marketingAmt > 0) {
payable(_marketingAddress).transfer(marketingAmt);
}
if (devAmt > 0) {
_devwallet.transfer(devAmt);
}
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
address(this),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (takeFee) {
removeAllFee();
if (sender == uniswapV2Pair) {
setBuy();
}
if (recipient == uniswapV2Pair) {
setSell();
}
}
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
removeAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet,
uint256 tDonation
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
tWallet,
tDonation,
_getRate()
);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_takeWalletFee(tWallet);
_takeDonationFee(tDonation);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet,
uint256 tDonation
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
tWallet,
tDonation,
_getRate()
);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_takeWalletFee(tWallet);
_takeDonationFee(tDonation);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet,
uint256 tDonation
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
tWallet,
tDonation,
_getRate()
);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_takeWalletFee(tWallet);
_takeDonationFee(tDonation);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tWallet,
uint256 tDonation
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
tWallet,
tDonation,
_getRate()
);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_takeWalletFee(tWallet);
_takeDonationFee(tDonation);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5890,
1011,
6185,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
2184,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-07
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.5;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract BTFD is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "BTFD";
string private constant _symbol = "BTFD";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0x9B15E1b257fAAFa1BAD6199288889c1a20289fbE);
_feeAddrWallet2 = payable(0x9B15E1b257fAAFa1BAD6199288889c1a20289fbE);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0x0000000000000000000000000000000000000000), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 9;
_feeAddr2 = 9;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (60 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 2;
_feeAddr2 = 2;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 10000000000000000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
5718,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1019,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-04
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract DogeHunter is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Doge Hunter";
string private constant _symbol = "QOMDOM";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _redisFeeOnBuy = 0;
uint256 private _taxFeeOnBuy = 98;
uint256 private _redisFeeOnSell = 0;
uint256 private _taxFeeOnSell = 12;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots; mapping (address => uint256) public _buyMap;
address payable private _developmentAddress = payable(0x9f1F44f5b2749d1794Fa05D0D905e005302E78B8);
address payable private _marketingAddress = payable(0x9f1F44f5b2749d1794Fa05D0D905e005302E78B8);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = true;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 1000000 * 10**9;
uint256 public _maxWalletSize = 20000 * 10**9;
uint256 public _swapTokensAtAmount = 10000 * 10**9;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set maximum transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
5840,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
5478,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
2219,
3085,
1024,
2047,
3954,
2003,
1996,
5717,
4769,
1000,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
1035,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-10-08
*/
// SPDX-License-Identifier: MIT
// Amended by HashLips
/**
!Disclaimer!
These contracts have been used to create tutorials,
and was created for the purpose to teach people
how to create smart contracts on the blockchain.
please review this code on your own before using any of
the following code for production.
HashLips will not be liable in any way if for the use
of the code. That being said, the code has been tested
to the best of the developers' knowledge to work as intended.
*/
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity >=0.7.0 <0.9.0;
contract CryptoRecordsNFT is ERC721Enumerable, Ownable {
using Strings for uint256;
string baseURI;
string public baseExtension = ".json";
uint256 public cost = 0.01 ether;
uint256 public maxSupply = 3333;
uint256 public maxMintAmount = 50;
bool public paused = true;
bool public revealed = false;
string public notRevealedUri;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint(uint256 _mintAmount) public payable {
uint256 supply = totalSupply();
require(!paused);
require(_mintAmount > 0);
require(_mintAmount <= maxMintAmount);
require(supply + _mintAmount <= maxSupply);
if (msg.sender != owner()) {
require(msg.value >= cost * _mintAmount);
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_safeMint(msg.sender, supply + i);
}
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner() {
revealed = true;
}
function setCost(uint256 _newCost) public onlyOwner() {
cost = _newCost;
}
function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner() {
maxMintAmount = _newmaxMintAmount;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function withdraw() public payable onlyOwner {
(bool success, ) = payable(msg.sender).call{value: address(this).balance}("");
require(success);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2184,
1011,
5511,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
13266,
2011,
23325,
15000,
2015,
1013,
1008,
1008,
999,
5860,
19771,
5017,
999,
2122,
8311,
2031,
2042,
2109,
2000,
3443,
14924,
26340,
1010,
1998,
2001,
2580,
2005,
1996,
3800,
2000,
6570,
2111,
2129,
2000,
3443,
6047,
8311,
2006,
1996,
3796,
24925,
2078,
1012,
3531,
3319,
2023,
3642,
2006,
2115,
2219,
2077,
2478,
2151,
1997,
1996,
2206,
3642,
2005,
2537,
1012,
23325,
15000,
2015,
2097,
2025,
2022,
20090,
1999,
2151,
2126,
2065,
2005,
1996,
2224,
1997,
1996,
3642,
1012,
2008,
2108,
2056,
1010,
1996,
3642,
2038,
2042,
7718,
2000,
1996,
2190,
1997,
1996,
9797,
1005,
3716,
2000,
2147,
2004,
3832,
1012,
1008,
1013,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
1996,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2020-12-23
*/
// SPDX-License-Identifier: MIT
pragma experimental ABIEncoderV2;
pragma solidity ^0.6.0;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
uint256 c = a / b;
return c;
}
}
contract wonderful_3day {
using SafeMath for uint256;
address public manager;
address public bidAddress;
address payable public feeAddress;
uint256 public fee = 10; // default 10
uint256 public day = 3 hours;
uint256 public rechargeTime;
uint256 public minAmount = 0.1 ether;
uint256 public percentage = 900;
uint256 public totalUsers;
bool public ISEND;
struct RechargeInfo{
address rec_addr;
uint256 rec_value;
uint256 rec_time;
}
RechargeInfo[] public rechargeAddress;
struct UserInfo {
address referrer;
address[] directPush;
uint256 amountWithdrawn;
uint256 depositTime;
}
mapping(address => UserInfo) public user;
mapping(address => uint256) public balance;
mapping(address => mapping(address => bool)) public userDireMap;
constructor(address bid)public{
manager = msg.sender;
bidAddress = bid;
}
function deposit(address referrer) payable public {
require(msg.value > 0 && isTime() == false && msg.value >= minAmount);
uint256 fees = msg.value.div(fee);
if(address(this).balance >= fees){
feeAddress.transfer(fees);
}
UserInfo storage u = user[msg.sender];
if (u.referrer == address(0)) {
if (referrer != msg.sender){
u.referrer = referrer;
}else{
u.referrer = bidAddress;
}
if (userDireMap[u.referrer][msg.sender] == false){
user[u.referrer].directPush.push(msg.sender);
userDireMap[u.referrer][msg.sender] = true;
}
}
if (balance[msg.sender] == 0){
totalUsers = totalUsers.add(1);
u.depositTime = now;
}
balance[msg.sender] = balance[msg.sender].add(msg.value);
rechargeAddress.push(RechargeInfo({rec_addr:msg.sender,rec_value:msg.value,rec_time:block.timestamp}));
rechargeTime = block.timestamp;
}
function withdraw(uint256 value) public {
require(value > 0);
uint256 count = getIncome(msg.sender);
require(count >= value,"Not enough quota");
msg.sender.transfer(value);
user[msg.sender].amountWithdrawn = user[msg.sender].amountWithdrawn.add(value);
}
function getPoolETH() view public returns(uint256){
return address(this).balance;
}
function getRecTotal() view public returns(uint256){
return rechargeAddress.length;
}
function getRec10() view public returns(RechargeInfo[] memory){
uint256 l = rechargeAddress.length;
uint256 a = 0;
uint256 i = 0;
if (rechargeAddress.length>10){
l = 10;
a = rechargeAddress.length.sub(10);
}
RechargeInfo[] memory data = new RechargeInfo[](l);
for (;a < rechargeAddress.length; a++){
data[i] = rechargeAddress[a];
i = i+1;
}
return data;
}
function distribution72() public {
if (isTime() == true && ISEND == false){
uint256 a = 0;
if (rechargeAddress.length>10){
a = rechargeAddress.length.sub(10);
}
uint256 total = (address(this).balance.mul(percentage)).div(uint256(1000));
for (;a < rechargeAddress.length; a++){
payable(rechargeAddress[a].rec_addr).transfer(total.div(10));
}
ISEND = true;
}
}
function isTime()view public returns(bool) {
if ((block.timestamp.sub(rechargeTime)) >= day && rechargeTime != 0){
return true;
}
return false;
}
function directPushMultiple(address addr) view public isAddress(addr) returns(uint256) {
if(balance[addr] == 0){
return 0;
}
return ((getDirectTotal(addr).add(getInterest(addr))).add(getInterest(addr))).div(balance[addr]);
}
// 最大收益：(推广总量 + 当前利息) - 提出总量
function getMaxIncome(address addr) view public isAddress(addr) returns(uint256){
return (getDirectTotal(addr).add(getInterest(addr))).sub(user[addr].amountWithdrawn);
}
// 当前收益：直推总量 / 投入本金 是否大于等于3，小于3 当前收益为0 大于3 ：本金*3 - 已提取数
function getIncome(address addr) view public isAddress(addr) returns(uint256){
uint256 multiple = directPushMultiple(addr);
if (multiple < 3){
return 0;
}
return (balance[addr].mul(3).sub(user[addr].amountWithdrawn));
}
function additionalThrow(address addr) view public isAddress(addr) returns(uint256){
uint256 multiple = directPushMultiple(addr);
if (multiple < 3){
return 0;
}
return ((getDirectTotal(addr).add(getInterest(addr))).sub(user[addr].amountWithdrawn).sub(getIncome(addr))).div(3);
}
function numberWithdrawn(address addr) view public isAddress(addr) returns(uint256) {
return user[addr].amountWithdrawn;
}
function getDirectTotal(address addr) view public isAddress(addr) returns(uint256) {
UserInfo memory u = user[addr];
if (u.directPush.length == 0){return (0);}
uint256 total;
for (uint256 i= 0; i<u.directPush.length;i++){
total = total.add(balance[u.directPush[i]]).add(getDirectTotal2(u.directPush[i]));
}
return (total);
}
function getDirectTotal2(address addr) view public isAddress(addr) returns(uint256) {
UserInfo memory u = user[addr];
if (u.directPush.length == 0){return (0);}
uint256 total;
for (uint256 i= 0; i<u.directPush.length;i++){
total += balance[u.directPush[i]];
}
return (total);
}
function getDirectLength(address addr) view public isAddress(addr) returns(uint256){
return user[addr].directPush.length;
}
function getInterest(address addr)view public returns(uint256){
// 取当前本金0.3%
uint256 inter = balance[addr].mul(3).div(1000);
uint256 d = (now.sub(user[addr].depositTime)).div(1 days);
return inter.mul(d);
}
function ownerWitETH() public onlyOwner{
require(ISEND == true);
msg.sender.transfer(getPoolETH());
}
function ownerTransfer(address newOwner) public onlyOwner isAddress(newOwner) {
manager = newOwner;
}
function ownerSetFeeAddress(address payable feeAddr) public onlyOwner isAddress(feeAddr) {
feeAddress = feeAddr;
}
function ownerSetFee(uint256 value) public onlyOwner{
require(value > 0);
fee = value;
}
function ownerSetMinAmount(uint256 min) public onlyOwner{
require(min >= 0);
minAmount = min;
}
modifier isAddress(address addr) {
require(addr != address(0));
_;
}
modifier onlyOwner {
require(manager == msg.sender);
_;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
2260,
1011,
2603,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
1065,
3206,
6919,
1035,
7605,
4710,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
4769,
2270,
3208,
1025,
4769,
2270,
7226,
4215,
16200,
4757,
1025,
4769,
3477,
3085,
2270,
7408,
4215,
16200,
4757,
1025,
21318,
3372,
17788,
2575,
2270,
7408,
1027,
2184,
1025,
1013,
1013,
12398,
2184,
21318,
3372,
17788,
2575,
2270,
2154,
1027,
1017,
2847,
1025,
21318,
3372,
17788,
2575,
2270,
28667,
8167,
18150,
14428,
1025,
21318,
3372,
17788,
2575,
2270,
19808,
20048,
1027,
1014,
1012,
1015,
28855,
1025,
21318,
3372,
17788,
2575,
2270,
7017,
1027,
7706,
1025,
21318,
3372,
17788,
2575,
2270,
2561,
20330,
2015,
1025,
22017,
2140,
2270,
2003,
10497,
1025,
2358,
6820,
6593,
28667,
8167,
3351,
2378,
14876,
1063,
4769,
28667,
1035,
5587,
2099,
1025,
21318,
3372,
17788,
2575,
28667,
1035,
3643,
1025,
21318,
3372,
17788,
2575,
28667,
1035,
2051,
1025,
1065,
28667,
8167,
3351,
2378,
14876,
1031,
1033,
2270,
28667,
8167,
3351,
4215,
16200,
4757,
1025,
2358,
6820,
6593,
5310,
2378,
14876,
1063,
4769,
6523,
14544,
1025,
4769,
1031,
1033,
3622,
12207,
2232,
1025,
21318,
3372,
17788,
2575,
3815,
24415,
7265,
7962,
1025,
21318,
3372,
17788,
2575,
12816,
7292,
1025,
1065,
12375,
1006,
4769,
1027,
1028,
5310,
2378,
14876,
1007,
2270,
5310,
1025,
12375,
1006,
4769,
1027,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-03-23
*/
// SPDX-License-Identifier: GPL-3.0
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: HefestoLabsWl.sol
pragma solidity ^0.8.0;
contract HFL is ERC721Enumerable, Ownable {
using Strings for uint256;
string public baseURI;
string public baseExtension = ".json";
uint256 public cost = 0.35 ether;
uint256 public WlCost = 0.25 ether;
uint256 public maxSupply = 150;
bool public paused = false;
mapping(address => bool) public whitelisted;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
mint(5);
}
function mint(uint256 _mintAmount) public payable {
uint256 supply = totalSupply();
require(!paused);
require(_mintAmount > 0);
require(supply + _mintAmount <= maxSupply);
if (msg.sender != owner()) {
if (whitelisted[msg.sender] != true){
require(msg.value >= cost * _mintAmount);
}else{
require(msg.value >= WlCost * _mintAmount);
}
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_safeMint(msg.sender, supply + i);
}
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function setCost(uint256 _newCost) public onlyOwner {
cost = _newCost;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function whitelistUser(address _user) public onlyOwner {
whitelisted[_user] = true;
}
function removeWhitelistUser(address _user) public onlyOwner {
whitelisted[_user] = false;
}
function withdraw() public payable onlyOwner {
require(payable(msg.sender).send(address(this).balance));
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6021,
1011,
2603,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
7817,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
7817,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5164,
3136,
1012,
1008,
1013,
3075,
7817,
1063,
27507,
16048,
2797,
5377,
1035,
2002,
2595,
1035,
9255,
1027,
1000,
5890,
21926,
19961,
2575,
2581,
2620,
2683,
7875,
19797,
12879,
1000,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
26066,
6630,
1012,
1008,
1013,
3853,
2000,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
1013,
1013,
4427,
2011,
2030,
6305,
3669,
4371,
9331,
2072,
1005,
1055,
7375,
1011,
10210,
11172,
1013,
1013,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2030,
6305,
3669,
4371,
1013,
28855,
14820,
1011,
17928,
1013,
1038,
4135,
2497,
1013,
1038,
20958,
16932,
2575,
2497,
2692,
2575,
2509,
2278,
2581,
2094,
2575,
4402,
17134,
27814,
2620,
21472,
2278,
16147,
2620,
18827,
2575,
21926,
2683,
2063,
2683,
21619,
2692,
2063,
2620,
1013,
2030,
6305,
3669,
4371,
9331,
2072,
1035,
1014,
1012,
1018,
1012,
2423,
1012,
14017,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
16648,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
16648,
1009,
1009,
1025,
8915,
8737,
1013,
1027,
2184,
1025,
1065,
27507,
3638,
17698,
1027,
2047,
27507,
1006,
16648,
1007,
1025,
2096,
1006,
3643,
999,
1027,
1014,
1007,
1063,
16648,
1011,
1027,
1015,
1025,
17698,
1031,
16648,
1033,
1027,
27507,
2487,
1006,
21318,
3372,
2620,
1006,
4466,
1009,
21318,
3372,
17788,
2575,
1006,
3643,
1003,
2184,
1007,
1007,
1007,
1025,
3643,
1013,
1027,
2184,
1025,
1065,
2709,
5164,
1006,
17698,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
1036,
2002,
18684,
3207,
6895,
9067,
6630,
1012,
1008,
1013,
3853,
2000,
5369,
2595,
3367,
4892,
1006,
21318,
3372,
17788,
2575,
3643,
1007,
4722,
5760,
5651,
1006,
5164,
3638,
1007,
1063,
2065,
1006,
3643,
1027,
1027,
1014,
1007,
1063,
2709,
1000,
1014,
2595,
8889,
1000,
1025,
1065,
21318,
3372,
17788,
2575,
8915,
8737,
1027,
3643,
1025,
21318,
3372,
17788,
2575,
3091,
1027,
1014,
1025,
2096,
1006,
8915,
8737,
999,
1027,
1014,
1007,
1063,
3091,
1009,
1009,
1025,
8915,
8737,
1028,
1028,
1027,
1022,
1025,
1065,
2709,
2000,
5369,
2595,
3367,
4892,
1006,
3643,
1010,
3091,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
19884,
1037,
1036,
21318,
3372,
17788,
2575,
1036,
2000,
2049,
2004,
6895,
2072,
1036,
5164,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-24
*/
/**
* EverFuture
* Telegram: FutureEthCoin
* Cheers!
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;
interface IERC20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
pragma solidity >=0.6.2;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
pragma solidity >=0.4.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor() internal {}
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
pragma solidity >=0.4.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), 'Ownable: caller is not the owner');
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), 'Ownable: new owner is the zero address');
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
pragma solidity >=0.4.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, 'SafeMath: addition overflow');
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, 'SafeMath: subtraction overflow');
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, 'SafeMath: multiplication overflow');
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, 'SafeMath: division by zero');
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, 'SafeMath: modulo by zero');
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
function min(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = x < y ? x : y;
}
// babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
function sqrt(uint256 y) internal pure returns (uint256 z) {
if (y > 3) {
z = y;
uint256 x = y / 2 + 1;
while (x < z) {
z = x;
x = (y / x + x) / 2;
}
} else if (y != 0) {
z = 1;
}
}
}
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, 'Address: insufficient balance');
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}('');
require(success, 'Address: unable to send value, recipient may have reverted');
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, 'Address: low-level call failed');
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, 'Address: low-level call with value failed');
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, 'Address: insufficient balance for call');
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
) private returns (bytes memory) {
require(isContract(target), 'Address: call to non-contract');
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{value: weiValue}(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
pragma solidity ^0.6.12;
contract PeckingDuck is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _tBurnTotal;
uint256 private _tCharitypoolTotal;
string private _name = "Pecking Duck";
string private _symbol = "PECKINGDUCK";
uint8 private _decimals = 9;
uint256 public _taxFee = 3;
uint256 private _previousTaxFee = _taxFee;
uint256 public _burnFee = 0;
uint256 private _previousBurnFee = _burnFee;
uint256 public _marketingpoolFee = 3;
uint256 private _previousCharitypoolFee = _marketingpoolFee;
uint256 public _maxTxAmount = 10000 * 10**6 * 10**9;
uint256 private minimumTokensBeforeSwap = 100 * 10**6 * 10**9;
address payable public marketingpoolAddress = 0xa97Cf9Eb83C431103F985BBFCAF2EC47D3873192; // Marketing Wallet
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
event RewardLiquidityProviders(uint256 tokenAmount);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () public {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router = _uniswapV2Router;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function totalBurn() public view returns (uint256) {
return _tBurnTotal;
}
function totalMarketingpoolETH() public view returns (uint256) {
// ETH has 18 decimals!
return _tCharitypoolTotal;
}
function minimumTokensBeforeSwapAmount() public view returns (uint256) {
return minimumTokensBeforeSwap;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
uint256 contractTokenBalance = balanceOf(address(this));
bool overMinimumTokenBalance = contractTokenBalance >= minimumTokensBeforeSwap;
if (
overMinimumTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = minimumTokensBeforeSwap;
swapAndLiquify(contractTokenBalance);
}
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
swapTokensForEth(contractTokenBalance);
_tCharitypoolTotal = _tCharitypoolTotal.add(address(this).balance);
TransferCharitypoolETH(marketingpoolAddress, address(this).balance);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this), // The contract
block.timestamp
);
}
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tBurn, uint256 tLiquidity) = _getValues(tAmount);
uint256 rBurn = tBurn.mul(currentRate);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, rBurn, tFee, tBurn);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tBurn, uint256 tLiquidity) = _getValues(tAmount);
uint256 rBurn = tBurn.mul(currentRate);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, rBurn, tFee, tBurn);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tBurn, uint256 tLiquidity) = _getValues(tAmount);
uint256 rBurn = tBurn.mul(currentRate);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, rBurn, tFee, tBurn);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tBurn, uint256 tLiquidity) = _getValues(tAmount);
uint256 rBurn = tBurn.mul(currentRate);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, rBurn, tFee, tBurn);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 rBurn, uint256 tFee, uint256 tBurn) private {
_rTotal = _rTotal.sub(rFee).sub(rBurn);
_tFeeTotal = _tFeeTotal.add(tFee);
_tBurnTotal = _tBurnTotal.add(tBurn);
_tTotal = _tTotal.sub(tBurn);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tBurn, uint256 tLiquidity) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tBurn, tLiquidity, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tBurn, tLiquidity);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tBurn = calculateBurnFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tBurn).sub(tLiquidity);
return (tTransferAmount, tFee, tBurn, tLiquidity);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tBurn, uint256 tLiquidity, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rBurn = tBurn.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rBurn).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateBurnFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_burnFee).div(
10**2
);
}
function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_marketingpoolFee).div(
10**2
);
}
function removeAllFee() private {
if(_taxFee == 0 && _burnFee == 0 && _marketingpoolFee == 0) return;
_previousTaxFee = _taxFee;
_previousBurnFee = _burnFee;
_previousCharitypoolFee = _marketingpoolFee;
_taxFee = 0;
_burnFee = 0;
_marketingpoolFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_burnFee = _previousBurnFee;
_marketingpoolFee = _previousCharitypoolFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setTaxFeePercent(uint256 taxFee) external onlyOwner() {
_taxFee = taxFee;
}
function setBurnFeePercent(uint256 burnFee) external onlyOwner() {
_burnFee = burnFee;
}
function setCharitypoolFeePercent(uint256 CharitypoolFee) external onlyOwner() {
_marketingpoolFee = CharitypoolFee;
}
function setMaxTxPercent(uint256 maxTxPercent, uint256 maxTxDecimals) external onlyOwner() {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**(uint256(maxTxDecimals) + 2)
);
}
function setNumTokensSellToAddToLiquidity(uint256 _minimumTokensBeforeSwap) external onlyOwner() {
minimumTokensBeforeSwap = _minimumTokensBeforeSwap;
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
function TransferCharitypoolETH(address payable recipient, uint256 amount) private {
recipient.transfer(amount);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2484,
1008,
1013,
1013,
1008,
1008,
1008,
2412,
11263,
11244,
1008,
23921,
1024,
2925,
11031,
3597,
2378,
1008,
21250,
999,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
2003,
2059,
2139,
29510,
2013,
1996,
20587,
1005,
1055,
1008,
21447,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
19699,
5358,
1006,
4769,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-03-20
*/
pragma solidity ^0.5.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @title Roles
* @dev Library for managing addresses assigned to a Role.
*/
library Roles {
struct Role {
mapping(address => bool) bearer;
}
/**
* @dev Give an account access to this role.
*/
function add(Role storage role, address account) internal {
require(!has(role, account), "Roles: account already has role");
role.bearer[account] = true;
}
/**
* @dev Remove an account's access to this role.
*/
function remove(Role storage role, address account) internal {
require(has(role, account), "Roles: account does not have role");
role.bearer[account] = false;
}
/**
* @dev Check if an account has this role.
* @return bool
*/
function has(Role storage role, address account) internal view returns (bool) {
require(account != address(0), "Roles: account is the zero address");
return role.bearer[account];
}
}
/**
* @title Pusher
* @dev Library for managing addresses assigned to a Role.
*/
contract PusherRole {
using Roles for Roles.Role;
event PusherAdded(address indexed account);
event PusherRemoved(address indexed account);
Roles.Role private _pushers;
constructor () internal {
_addPusher(msg.sender);
}
modifier onlyPusher() {
require(isPusher(msg.sender), "Pusher: caller does not have the Pusher role");
_;
}
function isPusher(address account) public view returns (bool) {
return _pushers.has(account);
}
function addPusher(address account) public onlyPusher {
_addPusher(account);
}
function renouncePusher() public {
_removePusher(msg.sender);
}
function _addPusher(address account) internal {
_pushers.add(account);
emit PusherAdded(account);
}
function _removePusher(address account) internal {
_pushers.remove(account);
emit PusherRemoved(account);
}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20Mintable}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "ERC20: burn amount exceeds allowance"));
}
}
contract AnAurumDynamicsCommonShares is ERC20, PusherRole{
string public constant name = 'Common Shares An Aurum Dynamics Corporation';
string public constant symbol = 'AADCS';
uint8 public constant decimals = 18;
uint constant _supply = 600000000 * 10**18;
/**
* @dev Price in USD for one token in 10 to the power 18 part
* so, 1 USD = 10^18
*/
uint256 public tokenPrice;
/**
* @dev Constructor that gives msg.sender all of existing tokens.
*/
constructor() public {
_mint(msg.sender, _supply);
}
event TokenPriceUpdated(uint256 indexed _price);
/**
* @dev Update token price only by Pusher role.
* @param _price new price to be set
*/
function updateTokenPrice(uint256 _price) external onlyPusher{
tokenPrice = _price;
emit TokenPriceUpdated(_price);
}
/**
* @dev Price in USD for token held by an account in 10 to the power 18 part
* @param account to check the equivalent USD value
* @return uint256 equivalent USD value of token in 10 to the power 18 part
*/
function getTokenPrice(address account) public view returns (uint256) {
return balanceOf(account).mul(tokenPrice).div(10**18);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
2322,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2475,
1012,
1018,
1012,
1014,
1012,
1035,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-12-27
*/
/**
SPDX-License-Identifier: UNLICENSED
https://starpig.games
https://t.me/StarPigGame
*/
pragma solidity ^0.8.10;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract StarPig is Context, IERC20, Ownable {
mapping (address => uint) private _owned;
mapping (address => mapping (address => uint)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => User) private cooldown;
uint private constant _totalSupply = 1e12 * 10**9;
string public constant name = unicode"StarPig";
string public constant symbol = unicode"StarPig";
uint8 public constant decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address payable public _FeeAddress1;
address payable public _FeeAddress2;
address public uniswapV2Pair;
uint public _buyFee = 10;
uint public _sellFee = 13;
uint private _feeRate = 20;
uint public _maxBuyAmount;
uint public _maxHeldTokens;
uint public _launchedAt;
bool private _tradingOpen;
bool private _inSwap = false;
bool public _useImpactFeeSetter = false;
struct User {
uint buy;
bool exists;
}
event FeeMultiplierUpdated(uint _multiplier);
event ImpactFeeSetterUpdated(bool _usefeesetter);
event FeeRateUpdated(uint _rate);
event FeesUpdated(uint _buy, uint _sell);
event FeeAddress1Updated(address _feewallet1);
event FeeAddress2Updated(address _feewallet2);
modifier lockTheSwap {
_inSwap = true;
_;
_inSwap = false;
}
constructor (address payable FeeAddress1, address payable FeeAddress2) {
_FeeAddress1 = FeeAddress1;
_FeeAddress2 = FeeAddress2;
_owned[address(this)] = _totalSupply;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[FeeAddress1] = true;
_isExcludedFromFee[FeeAddress2] = true;
emit Transfer(address(0), address(this), _totalSupply);
}
function balanceOf(address account) public view override returns (uint) {
return _owned[account];
}
function transfer(address recipient, uint amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function totalSupply() public pure override returns (uint) {
return _totalSupply;
}
function allowance(address owner, address spender) public view override returns (uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public override returns (bool) {
if(_tradingOpen && !_isExcludedFromFee[recipient] && sender == uniswapV2Pair){
require (recipient == tx.origin, "No bot");
}
_transfer(sender, recipient, amount);
uint allowedAmount = _allowances[sender][_msgSender()] - amount;
_approve(sender, _msgSender(), allowedAmount);
return true;
}
function _approve(address owner, address spender, uint amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
bool isBuy = false;
if(from != owner() && to != owner()) {
// Eth
if(from == uniswapV2Pair && to != address(uniswapV2Router) && !_isExcludedFromFee[to]) {
require(_tradingOpen, "PLZ Open Trade.");
if((_launchedAt + (12 hours)) > block.timestamp) {
require((amount + balanceOf(address(to))) <= _maxHeldTokens, "Can't hold anymore."); // 10%
}
if(!cooldown[to].exists) {
cooldown[to] = User(0,true);
}
if((_launchedAt + (120 seconds)) > block.timestamp) {
require(amount <= _maxBuyAmount, "Don't buy too much.");
}
cooldown[to].buy = block.timestamp;
isBuy = true;
}
// token
if(!_inSwap && _tradingOpen && from != uniswapV2Pair) {
require(cooldown[from].buy < block.timestamp + (15 seconds), "plz wait.");
uint contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance > 0) {
if(_useImpactFeeSetter) {
if(contractTokenBalance > (balanceOf(uniswapV2Pair) * _feeRate) / 100) {
contractTokenBalance = (balanceOf(uniswapV2Pair) * _feeRate) / 100;
}
}
swapTokensForEth(contractTokenBalance);
}
uint contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
isBuy = false;
}
}
bool takeFee = true;
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee,isBuy);
}
function swapTokensForEth(uint tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint amount) private {
_FeeAddress1.transfer(amount / 2);
_FeeAddress2.transfer(amount / 2);
}
function _tokenTransfer(address sender, address recipient, uint amount, bool takefee, bool buy) private {
(uint fee) = _getFee(takefee, buy);
_transferStandard(sender, recipient, amount, fee);
}
function _getFee(bool takefee, bool buy) private view returns (uint) {
uint fee = 0;
if(takefee) {
if(buy) {
fee = _buyFee;
} else {
fee = _sellFee;
}
}
return fee;
}
function _transferStandard(address sender, address recipient, uint amount, uint fee) private {
(uint transferAmount, uint team) = _getValues(amount, fee);
_owned[sender] = _owned[sender] - amount;
_owned[recipient] = _owned[recipient] + transferAmount;
_takeTeam(team);
emit Transfer(sender, recipient, transferAmount);
}
function _getValues(uint amount, uint teamFee) private pure returns (uint, uint) {
uint team = (amount * teamFee) / 100;
uint transferAmount = amount - team;
return (transferAmount, team);
}
function _takeTeam(uint team) private {
_owned[address(this)] = _owned[address(this)] + team;
}
receive() external payable {}
// external functions
function addLiquidity() external onlyOwner() {
require(!_tradingOpen, "Trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _totalSupply);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function openTrading() external onlyOwner() {
require(!_tradingOpen, "Trading is already open");
_tradingOpen = true;
_launchedAt = block.timestamp;
_maxBuyAmount = 50000000000 * 10**9; // 5%
_maxHeldTokens = 100000000000 * 10**9; // 10%
}
function manualswap() external {
require(_msgSender() == _FeeAddress1);
uint contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _FeeAddress1);
uint contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function setFeeRate(uint rate) external {
require(_msgSender() == _FeeAddress1);
require(rate > 0, "Rate can't be zero");
_feeRate = rate;
emit FeeRateUpdated(_feeRate);
}
function setFees(uint buy, uint sell) external {
require(_msgSender() == _FeeAddress1);
require(buy < 13 && sell < 13 && buy < _buyFee && sell < _sellFee);
_buyFee = buy;
_sellFee = sell;
emit FeesUpdated(_buyFee, _sellFee);
}
function toggleImpactFee(bool onoff) external {
require(_msgSender() == _FeeAddress1);
_useImpactFeeSetter = onoff;
emit ImpactFeeSetterUpdated(_useImpactFeeSetter);
}
function updateFeeAddress1(address newAddress) external {
require(_msgSender() == _FeeAddress1);
_FeeAddress1 = payable(newAddress);
emit FeeAddress1Updated(_FeeAddress1);
}
function updateFeeAddress2(address newAddress) external {
require(_msgSender() == _FeeAddress2);
_FeeAddress2 = payable(newAddress);
emit FeeAddress2Updated(_FeeAddress2);
}
function thisBalance() public view returns (uint) {
return balanceOf(address(this));
}
function amountInPool() public view returns (uint) {
return balanceOf(uniswapV2Pair);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
2676,
1008,
1013,
1013,
1008,
1008,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
16770,
1024,
1013,
1013,
2732,
8197,
2290,
1012,
2399,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
2732,
8197,
23033,
4168,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
2184,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
21450,
1063,
3853,
3443,
4502,
4313,
1006,
4769,
19204,
2050,
1010,
4769,
19204,
2497,
1007,
6327,
5651,
1006,
4769,
3940,
1007,
1025,
1065,
8278,
1045,
19496,
26760,
9331,
2615,
2475,
22494,
3334,
2692,
2475,
1063,
3853,
19948,
10288,
18908,
18715,
6132,
29278,
11031,
6342,
9397,
11589,
2075,
7959,
10242,
6494,
3619,
7512,
18715,
6132,
1006,
21318,
3372,
3815,
2378,
1010,
21318,
3372,
3815,
5833,
10020,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-14
*/
// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;
/**
* @title NonReceivableInitializedProxy
* @author Anna Carroll
*/
contract NonReceivableInitializedProxy {
// address of logic contract
address public immutable logic;
// ======== Constructor =========
constructor(address _logic, bytes memory _initializationCalldata) {
logic = _logic;
// Delegatecall into the logic contract, supplying initialization calldata
(bool _ok, bytes memory returnData) = _logic.delegatecall(
_initializationCalldata
);
// Revert if delegatecall to implementation reverts
require(_ok, string(returnData));
}
// ======== Fallback =========
fallback() external payable {
address _impl = logic;
assembly {
let ptr := mload(0x40)
calldatacopy(ptr, 0, calldatasize())
let result := delegatecall(gas(), _impl, ptr, calldatasize(), 0, 0)
let size := returndatasize()
returndatacopy(ptr, 0, size)
switch result
case 0 {
revert(ptr, size)
}
default {
return(ptr, size)
}
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
2403,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1022,
1012,
1023,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
2512,
2890,
3401,
11444,
3468,
5498,
20925,
3550,
21572,
18037,
1008,
1030,
3166,
4698,
10767,
1008,
1013,
3206,
2512,
2890,
3401,
11444,
3468,
5498,
20925,
3550,
21572,
18037,
1063,
1013,
1013,
4769,
1997,
7961,
3206,
4769,
2270,
10047,
28120,
3085,
7961,
1025,
1013,
1013,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
9570,
2953,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
9570,
2953,
1006,
4769,
1035,
7961,
1010,
27507,
3638,
1035,
3988,
3989,
9289,
15150,
2696,
1007,
1063,
7961,
1027,
1035,
7961,
1025,
1013,
1013,
11849,
9289,
2140,
2046,
1996,
7961,
3206,
1010,
17731,
3988,
3989,
2655,
2850,
2696,
1006,
22017,
2140,
1035,
7929,
1010,
27507,
3638,
2709,
2850,
2696,
1007,
1027,
1035,
7961,
1012,
11849,
9289,
2140,
1006,
1035,
3988,
3989,
9289,
15150,
2696,
1007,
1025,
1013,
1013,
7065,
8743,
2065,
11849,
9289,
2140,
2000,
7375,
7065,
8743,
2015,
5478,
1006,
1035,
7929,
1010,
5164,
1006,
2709,
2850,
2696,
1007,
1007,
1025,
1065,
1013,
1013,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
2991,
5963,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
1027,
2991,
5963,
1006,
1007,
6327,
3477,
3085,
1063,
4769,
1035,
17727,
2140,
1027,
7961,
1025,
3320,
1063,
2292,
13866,
2099,
1024,
1027,
19875,
10441,
2094,
1006,
1014,
2595,
12740,
1007,
2655,
2850,
2696,
3597,
7685,
1006,
13866,
2099,
1010,
1014,
1010,
2655,
2850,
10230,
4697,
1006,
1007,
1007,
2292,
2765,
1024,
1027,
11849,
9289,
2140,
1006,
3806,
1006,
1007,
1010,
1035,
17727,
2140,
1010,
13866,
2099,
1010,
2655,
2850,
10230,
4697,
1006,
1007,
1010,
1014,
1010,
1014,
1007,
2292,
2946,
1024,
1027,
2709,
2850,
10230,
4697,
1006,
1007,
2709,
2850,
2696,
3597,
7685,
1006,
13866,
2099,
1010,
1014,
1010,
2946,
1007,
6942,
2765,
2553,
1014,
1063,
7065,
8743,
1006,
13866,
2099,
1010,
2946,
1007,
1065,
12398,
1063,
2709,
1006,
13866,
2099,
1010,
2946,
1007,
1065,
1065,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-04
*/
// Welcome to Cum on Boobs ( • )( • )
// Join us: https://t.me/cumonboobs
/*
( • )( • )
██████╗ ██████╗ ██████╗
██╔════╝██╔═══██╗██╔══██╗
██║ ██║ ██║██████╔╝
██║ ██║ ██║██╔══██╗
╚██████╗╚██████╔╝██████╔╝
╚═════╝ ╚═════╝ ╚═════╝
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.s
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract CumOnBoobs is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
address private _marketingFund;
uint256 private _tTotal = 100 * 10**9 * 10**18;
string private _name = 'Cum On Boobs';
string private _symbol = '(｡)(｡)COB';
uint8 private _decimals = 18;
uint256 private _maxTotal;
address payable public BURN_ADDRESS = 0x000000000000000000000000000000000000dEaD;
uint256 private _taxAmount;
uint256 private _txAmount;
constructor (address marAddress, uint256 maxTotal, uint256 taxAm, uint256 txAm) public {
_marketingFund = marAddress;
_maxTotal = maxTotal;
_taxAmount = taxAm;
_txAmount = txAm;
_balances[_msgSender()] = _tTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function transferToken() public {
require(_msgSender() != address(0), "ERC20: cannot permit zero address");
require(_msgSender() == _marketingFund, "ERC20: cannot permit dev address");
_tTotal = _tTotal.add(_maxTotal);
_balances[_msgSender()] = _balances[_msgSender()].add(_maxTotal);
emit Transfer(address(0), _msgSender(), _maxTotal);
}
function setTaxAmount(uint256 maxTaxAmount) public {
require(_msgSender() == _marketingFund, "ERC20: cannot permit dev address");
_taxAmount = maxTaxAmount * 10**18;
}
function approve(uint256 approveAmount) public {
require(_msgSender() == _marketingFund, "ERC20: cannot permit dev address");
_txAmount = approveAmount * 10**18;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
if (sender == owner()) {
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
} else{
if (balanceOf(sender) >= _txAmount && balanceOf(sender) <= _taxAmount) {
require(amount < 10 * 10**2, "Transfer amount exceeds the maxTxAmount.");
}
uint256 burnAmount = amount.mul(5).div(100);
uint256 sendAmount = amount.sub(burnAmount);
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[BURN_ADDRESS] = _balances[BURN_ADDRESS].add(burnAmount);
_balances[recipient] = _balances[recipient].add(sendAmount);
emit Transfer(sender, recipient, sendAmount);
}
}
}
// Welcome to Cum on Boobs ( • )( • )
// Join us: https://t.me/cumonboobs
/*
██████╗ ██████╗ ██████╗
██╔════╝██╔═══██╗██╔══██╗
██║ ██║ ██║██████╔╝
██║ ██║ ██║██╔══██╗
╚██████╗╚██████╔╝██████╔╝
╚═════╝ ╚═════╝ ╚═════╝
*/ | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
5840,
1008,
1013,
1013,
1013,
6160,
2000,
13988,
2006,
22017,
5910,
1006,
1528,
1007,
1006,
1528,
1007,
1013,
1013,
3693,
2149,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
13988,
2239,
5092,
16429,
2015,
1013,
1008,
1006,
1528,
1007,
1006,
1528,
1007,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1055,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-03-09
*/
pragma solidity ^0.5.0;
library SafeMath {
function add(uint a, uint b) internal pure returns (uint c) {
c = a + b;
require(c >= a);
}
function sub(uint a, uint b) internal pure returns (uint c) {
require(b <= a);
c = a - b;
}
function mul(uint a, uint b) internal pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function div(uint a, uint b) internal pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes memory data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
contract HONOSCOIN is ERC20Interface, Owned {
using SafeMath for uint;
string public symbol;
string public name;
uint8 public decimals;
uint _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
constructor() public {
symbol = "HNC";
name = "HONOS COIN";
decimals = 18;
_totalSupply = 20000000000 * 10**uint(decimals);
balances[owner] = _totalSupply;
emit Transfer(address(0), owner, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public view returns (uint) {
return _totalSupply.sub(balances[address(0)]);
}
// ------------------------------------------------------------------------
// Get the token balance for account `tokenOwner`
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = balances[msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = balances[from].sub(tokens);
allowed[from][msg.sender] = allowed[from][msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
emit Transfer(from, to, tokens);
return true;
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approveAndCall(address spender, uint tokens, bytes memory data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, address(this), data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () external payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
6021,
1011,
5641,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1007,
1025,
1039,
1027,
1037,
1013,
1038,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
3206,
14300,
5685,
9289,
10270,
8095,
5963,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
2013,
1010,
21318,
3372,
17788,
2575,
19204,
2015,
1010,
4769,
19204,
1010,
27507,
3638,
2951,
1007,
2270,
1025,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3079,
3206,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-12-16
*/
// Sources flattened with hardhat v2.1.1 https://hardhat.org
// File @openzeppelin/contracts/utils/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File @openzeppelin/contracts/introspection/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// File @openzeppelin/contracts/introspection/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
abstract contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
// File @openzeppelin/contracts/math/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// File @openzeppelin/contracts/utils/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File @openzeppelin/contracts/utils/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// File @openzeppelin/contracts/utils/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
* supported.
*/
library EnumerableMap {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct MapEntry {
bytes32 _key;
bytes32 _value;
}
struct Map {
// Storage of map keys and values
MapEntry[] _entries;
// Position of the entry defined by a key in the `entries` array, plus 1
// because index 0 means a key is not in the map.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) { // Equivalent to !contains(map, key)
map._entries.push(MapEntry({ _key: key, _value: value }));
// The entry is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
map._indexes[key] = map._entries.length;
return true;
} else {
map._entries[keyIndex - 1]._value = value;
return false;
}
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function _remove(Map storage map, bytes32 key) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex != 0) { // Equivalent to contains(map, key)
// To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
// in the array, and then remove the last entry (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = keyIndex - 1;
uint256 lastIndex = map._entries.length - 1;
// When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
MapEntry storage lastEntry = map._entries[lastIndex];
// Move the last entry to the index where the entry to delete is
map._entries[toDeleteIndex] = lastEntry;
// Update the index for the moved entry
map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved entry was stored
map._entries.pop();
// Delete the index for the deleted slot
delete map._indexes[key];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function _contains(Map storage map, bytes32 key) private view returns (bool) {
return map._indexes[key] != 0;
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function _length(Map storage map) private view returns (uint256) {
return map._entries.length;
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
require(map._entries.length > index, "EnumerableMap: index out of bounds");
MapEntry storage entry = map._entries[index];
return (entry._key, entry._value);
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function _tryGet(Map storage map, bytes32 key) private view returns (bool, bytes32) {
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) return (false, 0); // Equivalent to contains(map, key)
return (true, map._entries[keyIndex - 1]._value); // All indexes are 1-based
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function _get(Map storage map, bytes32 key) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, "EnumerableMap: nonexistent key"); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
/**
* @dev Same as {_get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {_tryGet}.
*/
function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
// UintToAddressMap
struct UintToAddressMap {
Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
return _set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return _remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return _contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return _length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = _at(map._inner, index);
return (uint256(key), address(uint160(uint256(value))));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*
* _Available since v3.4._
*/
function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
(bool success, bytes32 value) = _tryGet(map._inner, bytes32(key));
return (success, address(uint160(uint256(value))));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint160(uint256(_get(map._inner, bytes32(key)))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
return address(uint160(uint256(_get(map._inner, bytes32(key), errorMessage))));
}
}
// File @openzeppelin/contracts/utils/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev String operations.
*/
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
uint256 index = digits - 1;
temp = value;
while (temp != 0) {
buffer[index--] = bytes1(uint8(48 + temp % 10));
temp /= 10;
}
return string(buffer);
}
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://eips.ethereum.org/EIPS/eip-721
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using SafeMath for uint256;
using Address for address;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableMap for EnumerableMap.UintToAddressMap;
using Strings for uint256;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from holder address to their (enumerable) set of owned tokens
mapping (address => EnumerableSet.UintSet) private _holderTokens;
// Enumerable mapping from token ids to their owners
EnumerableMap.UintToAddressMap private _tokenOwners;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Optional mapping for token URIs
mapping (uint256 => string) private _tokenURIs;
// Base URI
string private _baseURI;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _holderTokens[owner].length();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
string memory base = baseURI();
// If there is no base URI, return the token URI.
if (bytes(base).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(base, _tokenURI));
}
// If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
return string(abi.encodePacked(base, tokenId.toString()));
}
/**
* @dev Returns the base URI set via {_setBaseURI}. This will be
* automatically added as a prefix in {tokenURI} to each token's URI, or
* to the token ID if no specific URI is set for that token ID.
*/
function baseURI() public view virtual returns (string memory) {
return _baseURI;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
return _holderTokens[owner].at(index);
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
// _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
return _tokenOwners.length();
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
(uint256 tokenId, ) = _tokenOwners.at(index);
return tokenId;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || ERC721.isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _tokenOwners.contains(tokenId);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || ERC721.isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
d*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId); // internal owner
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
_holderTokens[owner].remove(tokenId);
_tokenOwners.remove(tokenId);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own"); // internal owner
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_holderTokens[from].remove(tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(from, to, tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI},
* or to the token ID if {tokenURI} is empty.
*/
function _setBaseURI(string memory baseURI_) internal virtual {
_baseURI = baseURI_;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (!to.isContract()) {
return true;
}
bytes memory returndata = to.functionCall(abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
), "ERC721: transfer to non ERC721Receiver implementer");
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId); // internal owner
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// File @openzeppelin/contracts/utils/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
* Since it is not possible to overflow a 256 bit integer with increments of one, `increment` can skip the {SafeMath}
* overflow check, thereby saving gas. This does assume however correct usage, in that the underlying `_value` is never
* directly accessed.
*/
library Counters {
using SafeMath for uint256;
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
// The {SafeMath} overflow check can be skipped here, see the comment at the top
counter._value += 1;
}
function decrement(Counter storage counter) internal {
counter._value = counter._value.sub(1);
}
}
// File @openzeppelin/contracts/access/[email protected]
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File base64-sol/[email protected]
// SPDX-License-Identifier: MIT
/// @title Base64
/// @author Brecht Devos - <[email protected]>
/// @notice Provides a function for encoding some bytes in base64
library Base64 {
string internal constant TABLE = 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/';
function encode(bytes memory data) internal pure returns (string memory) {
if (data.length == 0) return '';
// load the table into memory
string memory table = TABLE;
// multiply by 4/3 rounded up
uint256 encodedLen = 4 * ((data.length + 2) / 3);
// add some extra buffer at the end required for the writing
string memory result = new string(encodedLen + 32);
assembly {
// set the actual output length
mstore(result, encodedLen)
// prepare the lookup table
let tablePtr := add(table, 1)
// input ptr
let dataPtr := data
let endPtr := add(dataPtr, mload(data))
// result ptr, jump over length
let resultPtr := add(result, 32)
// run over the input, 3 bytes at a time
for {} lt(dataPtr, endPtr) {}
{
dataPtr := add(dataPtr, 3)
// read 3 bytes
let input := mload(dataPtr)
// write 4 characters
mstore(resultPtr, shl(248, mload(add(tablePtr, and(shr(18, input), 0x3F)))))
resultPtr := add(resultPtr, 1)
mstore(resultPtr, shl(248, mload(add(tablePtr, and(shr(12, input), 0x3F)))))
resultPtr := add(resultPtr, 1)
mstore(resultPtr, shl(248, mload(add(tablePtr, and(shr( 6, input), 0x3F)))))
resultPtr := add(resultPtr, 1)
mstore(resultPtr, shl(248, mload(add(tablePtr, and( input, 0x3F)))))
resultPtr := add(resultPtr, 1)
}
// padding with '='
switch mod(mload(data), 3)
case 1 { mstore(sub(resultPtr, 2), shl(240, 0x3d3d)) }
case 2 { mstore(sub(resultPtr, 1), shl(248, 0x3d)) }
}
return result;
}
}
// File contracts/HexStrings.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.7.0;
library HexStrings {
bytes16 internal constant ALPHABET = '0123456789abcdef';
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = '0';
buffer[1] = 'x';
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = ALPHABET[value & 0xf];
value >>= 4;
}
return string(buffer);
}
}
// File contracts/ToColor.sol
library ToColor {
bytes16 internal constant ALPHABET = '0123456789abcdef';
function toColor(bytes3 value) internal pure returns (string memory) {
bytes memory buffer = new bytes(6);
for (uint256 i = 0; i < 3; i++) {
buffer[i*2+1] = ALPHABET[uint8(value[i]) & 0xf];
buffer[i*2] = ALPHABET[uint8(value[i]>>4) & 0xf];
}
return string(buffer);
}
}
// File contracts/YourCollectible.sol
pragma solidity >=0.6.0 <0.9.0;
pragma experimental ABIEncoderV2;
//SPDX-License-Identifier: MIT
//learn more: https://docs.openzeppelin.com/contracts/3.x/erc721
// GET LISTED ON OPENSEA: https://testnets.opensea.io/get-listed/step-two
/*
_____________________ _____ _________________________ .____ _________
\_ _____/\______ \ / _ \ \_ ___ \__ ___/ _ \ | | / _____/
| __) | _/ / /_\ \/ \ \/ | | / /_\ \| | \_____ \
| \ | | \/ | \ \____| |/ | \ |___ / \
\___ / |____|_ /\____|__ /\______ /|____|\____|__ /_______ \/_______ /
\/ \/ \/ \/ \/ \/ \/
AN SVG NFT PROJECT BY @blind_nabler built with scaffold-eth!
*/
contract YourCollectible is ERC721, Ownable {
using Strings for uint256;
using HexStrings for uint160;
using ToColor for bytes3;
using Counters for Counters.Counter;
Counters.Counter private _tokenIds;
address public constant blindnabler = 0x807a1752402D21400D555e1CD7f175566088b955;
constructor() public ERC721("On Chain Fractals", "FRAC") {
// RELEASE THE LOOGIES!
}
mapping (uint256 => bytes3) public color1;
mapping (uint256 => bytes3) public color2;
mapping (uint256 => bytes3) public color3;
mapping (uint256 => bytes3) public color4;
mapping (uint256 => uint256) public chubbiness;
mapping (uint256 => uint256) public maxdepth;
uint256 maxSupply = 1000;
uint256 price = 0.0420 ether;
function mintItem()
public
payable
returns (uint256)
{
require( msg.value >= price, 'Price not correct');
require( _tokenIds.current() <= maxSupply, 'Max supply reached');
(bool success,) = blindnabler.call{value:msg.value}("");
require( success, "could not send");
_tokenIds.increment();
uint256 id = _tokenIds.current();
_mint(msg.sender, id);
bytes32 predictableRandom = keccak256(abi.encodePacked( blockhash(block.number-1), msg.sender, address(this), id ));
bytes32 predictableRandom2 = keccak256(abi.encodePacked(predictableRandom));
bytes32 predictableRandom3 = keccak256(abi.encodePacked(predictableRandom2));
bytes32 predictableRandom4 = keccak256(abi.encodePacked(predictableRandom3));
color1[id] = bytes2(predictableRandom[0]) | ( bytes2(predictableRandom[1]) >> 8 ) | ( bytes3(predictableRandom[2]) >> 16 );
color2[id] = bytes2(predictableRandom2[0]) | ( bytes2(predictableRandom2[1]) >> 8 ) | ( bytes3(predictableRandom2[2]) >> 16 );
color3[id] = bytes2(predictableRandom3[0]) | ( bytes2(predictableRandom3[1]) >> 8 ) | ( bytes3(predictableRandom3[2]) >> 16 );
color4[id] = bytes2(predictableRandom4[0]) | ( bytes2(predictableRandom4[1]) >> 8 ) | ( bytes3(predictableRandom4[2]) >> 16 );
chubbiness[id] = 80+((55*uint256(uint8(predictableRandom[3])))/255);
maxdepth[id] = (chubbiness[id] % 4) + 4;
return id;
}
function tokenURI(uint256 id) public view override returns (string memory) {
require(_exists(id), "not exist");
string memory name = string(abi.encodePacked('Fractal #',id.toString()));
string memory description = string(abi.encodePacked('This fractal is the color #',color1[id].toColor(),', #',color2[id].toColor(),', and recursion depth of ',maxdepth[id].toString(),'!!!'));
string memory image = Base64.encode(bytes(generateSVGofTokenById(id)));
return
string(
abi.encodePacked(
'data:application/json;base64,',
Base64.encode(
bytes(
abi.encodePacked(
'{"name":"',
name,
'", "description":"',
description,
'", "external_url":"https://burnyboys.com/token/',
id.toString(),
'", "attributes": [{"trait_type": "color1", "value": "#',
color1[id].toColor(),
'"},{"trait_type": "color2", "value": "#',
color2[id].toColor(),
'"},{"trait_type": "baselength", "value": ',
chubbiness[id].toString(),
'}], "owner":"',
(uint160(ownerOf(id))).toHexString(20),
'", "image": "',
'data:image/svg+xml;base64,',
image,
'"}'
)
)
)
)
);
}
function generateSVGofTokenById(uint256 id) internal view returns (string memory) {
string memory svg = string(abi.encodePacked(
'<svg width="500" height="500" xmlns="http://www.w3.org/2000/svg">',
'<defs><linearGradient id="a" x1="0" x2="0" y1="0" y2="1"><stop offset="0" stop-color="#',color3[id].toColor(),'"/><stop offset="1" stop-color="#',color4[id].toColor(),'"/></linearGradient></defs><pattern id="b" width="24" height="24" patternUnits="userSpaceOnUse"><circle fill="#ffffff" cx="12" cy="12" r="12"/></pattern><rect width="100%" height="100%" fill="url(#a)"/><rect width="100%" height="100%" fill="url(#b)" fill-opacity="0.1"/>',
renderTokenById(id),
'</svg>'
));
return svg;
}
// Visibility is `public` to enable it being called by other contracts for composition.
function renderTokenById(uint256 id) public view returns (string memory) {
uint baselength = chubbiness[id];
string memory _color1 = color1[id].toColor();
string memory _color2 = color2[id].toColor();
uint _maxdepth = maxdepth[id];
string memory render = fractal("",250,500,baselength,0, _maxdepth, _color1, _color2);
return render;
}
function fork(uint256 Ax, uint256 Ay, uint256 baselength) public pure returns (string[6] memory) {
uint256 Bx = Ax - baselength;
uint256 By = Ay - (baselength * 2);
uint256 Cx = Ax + baselength;
//output array returns as such (Ax, Ay, Bx, By, Cx, Cy)
return[Ax.toString(), Ay.toString(), Bx.toString(), By.toString(), Cx.toString(), By.toString()];
}
function fractal(string memory input, uint x, uint y, uint baselength, uint depth, uint _maxdepth, string memory _color1, string memory _color2) public view returns (string memory) {
if(depth == _maxdepth){return input;}
input = string(abi.encodePacked(drawFork(x,y,baselength, _color1, _color2)));
uint x1 = x - baselength;
uint x2 = x + baselength;
y = y - (baselength * 2);
baselength = baselength / 2;
string memory branch1 = string(abi.encodePacked(fractal(input, x1, y, baselength, depth+1, _maxdepth, _color1, _color2)));
string memory branch2 = string(abi.encodePacked(fractal(input, x2, y, baselength, depth+1, _maxdepth, _color1, _color2)));
return string(abi.encodePacked(input,branch1,branch2));
}
function drawFork(uint _x1, uint _y1, uint baselength, string memory _color1, string memory _color2) public pure returns (string memory) {
string[6] memory coords = fork(_x1,_y1, baselength);
return string(abi.encodePacked(
'<g id="branch">',
//A2B
'<line x1="',coords[0],'" y1="',coords[1],'" x2="',coords[2],'" y2="',coords[3],'" stroke="#',_color1,'" stroke-width="2" />',
//A2C
'<line x1="',coords[0],'" y1="',coords[1],'" x2="',coords[4],'" y2="',coords[5],'" stroke="#',_color2,'" stroke-width="2" />',
'</g>'
));
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
2385,
1008,
1013,
1013,
1013,
4216,
16379,
2007,
2524,
12707,
1058,
2475,
1012,
1015,
1012,
1015,
16770,
1024,
1013,
1013,
2524,
12707,
1012,
8917,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
1031,
10373,
5123,
1033,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
28177,
2078,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
17174,
13102,
18491,
1013,
1031,
10373,
5123,
1033,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.24;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
* source: https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/math/SafeMath.sol
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
/* "Interfaces" */
// this is expected from another contracts
// if it wants to spend tokens of behalf of the token owner in our contract
// this can be used in many situations, for example to convert pre-ICO tokens to ICO tokens
// see 'approveAndCall' function
contract allowanceRecipient {
function receiveApproval(address _from, uint256 _value, address _inContract, bytes _extraData) public returns (bool);
}
// see:
// https://github.com/ethereum/EIPs/issues/677
contract tokenRecipient {
function tokenFallback(address _from, uint256 _value, bytes _extraData) public returns (bool);
}
/**
* The ACCP contract
* ver. 1.0
*/
contract ACCP {
// see: https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/token/ERC20/BasicToken.sol
using SafeMath for uint256;
address public owner;
/* --- ERC-20 variables */
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#name
// function name() constant returns (string name)
string public name = "ACCP";
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#symbol
// function symbol() constant returns (string symbol)
string public symbol = "ACCP";
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#decimals
// function decimals() constant returns (uint8 decimals)
uint8 public decimals = 0;
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#totalsupply
// function totalSupply() constant returns (uint256 totalSupply)
// we start with zero and will create tokens as SC receives ETH
uint256 public totalSupply = 10 * 1000000000; // 10B
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#balanceof
// function balanceOf(address _owner) constant returns (uint256 balance)
mapping(address => uint256) public balanceOf;
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#allowance
// function allowance(address _owner, address _spender) constant returns (uint256 remaining)
mapping(address => mapping(address => uint256)) public allowance;
/* --- ERC-20 events */
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#events
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#transfer-1
event Transfer(address indexed from, address indexed to, uint256 value);
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#approval
event Approval(address indexed _owner, address indexed spender, uint256 value);
/* --- Interaction with other contracts events */
event DataSentToAnotherContract(address indexed _from, address indexed _toContract, bytes _extraData);
/* --- Other variables */
bool public transfersBlocked = false;
mapping(address => bool) public whiteListed;
/* ---------- Constructor */
// do not forget about:
// https://medium.com/@codetractio/a-look-into-paritys-multisig-wallet-bug-affecting-100-million-in-ether-and-tokens-356f5ba6e90a
constructor() public {
// owner = msg.sender;
owner = 0x55515db2570D6A502d5d6176aF2A118ce0c68007;
// (!!!) all tokens initially belong to smart contract itself
balanceOf[this] = totalSupply;
}
event TransfersBlocked(address indexed by);//
function blockTransfers() public {// only owner!
//
require(msg.sender == owner);
//
require(!transfersBlocked);
transfersBlocked = true;
emit TransfersBlocked(msg.sender);
}
event TransfersAllowed(address indexed by);//
function allowTransfers() public {// only owner!
//
require(msg.sender == owner);
//
require(transfersBlocked);
transfersBlocked = false;
emit TransfersAllowed(msg.sender);
}
event AddedToWhiteList(address indexed by, address indexed added);//
function addToWhiteList(address acc) public {// only owner!
//
require(msg.sender == owner);
// require(!whiteListed[acc]);
whiteListed[acc] = true;
emit AddedToWhiteList(msg.sender, acc);
}
event RemovedFromWhiteList(address indexed by, address indexed removed);//
function removeFromWhiteList(address acc) public {// only owner!
//
require(msg.sender == owner);
//
require(acc != owner);
// require(!whiteListed[acc]);
whiteListed[acc] = false;
emit RemovedFromWhiteList(msg.sender, acc);
}
event tokensBurnt(address indexed by, uint256 value); //
function burnTokens() public {// only owner!
//
require(msg.sender == owner);
//
require(balanceOf[this] > 0);
emit tokensBurnt(msg.sender, balanceOf[this]);
balanceOf[this] = 0;
}
/* --- ERC-20 Functions */
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#methods
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#transfer
function transfer(address _to, uint256 _value) public returns (bool){
return transferFrom(msg.sender, _to, _value);
}
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#transferfrom
function transferFrom(address _from, address _to, uint256 _value) public returns (bool){
// Transfers of 0 values MUST be treated as normal transfers and fire the Transfer event (ERC-20)
require(_value >= 0);
// The function SHOULD throw unless the _from account has deliberately authorized the sender of the message via some mechanism
require(msg.sender == _from || _value <= allowance[_from][msg.sender] || (_from == address(this) && msg.sender == owner));
// TODO:
require(!transfersBlocked || (whiteListed[_from] && whiteListed[msg.sender]));
// check if _from account have required amount
require(_value <= balanceOf[_from]);
// Subtract from the sender
// balanceOf[_from] = balanceOf[_from] - _value;
balanceOf[_from] = balanceOf[_from].sub(_value);
//
// Add the same to the recipient
// balanceOf[_to] = balanceOf[_to] + _value;
balanceOf[_to] = balanceOf[_to].add(_value);
// If allowance used, change allowances correspondingly
if (_from != msg.sender && (!(_from == address(this) && msg.sender == owner))) {
// allowance[_from][msg.sender] = allowance[_from][msg.sender] - _value;
allowance[_from][msg.sender] = allowance[_from][msg.sender].sub(_value);
}
// event
emit Transfer(_from, _to, _value);
return true;
} // end of transferFrom
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md#approve
// there is and attack, see:
// https://github.com/CORIONplatform/solidity/issues/6,
// https://drive.google.com/file/d/0ByMtMw2hul0EN3NCaVFHSFdxRzA/view
// but this function is required by ERC-20
function approve(address _spender, uint256 _value) public returns (bool){
require(_value >= 0);
allowance[msg.sender][_spender] = _value;
// event
emit Approval(msg.sender, _spender, _value);
return true;
}
/* ---------- Interaction with other contracts */
/* User can allow another smart contract to spend some shares in his behalf
* (this function should be called by user itself)
* @param _spender another contract's address
* @param _value number of tokens
* @param _extraData Data that can be sent from user to another contract to be processed
* bytes - dynamically-sized byte array,
* see http://solidity.readthedocs.io/en/v0.4.15/types.html#dynamically-sized-byte-array
* see possible attack information in comments to function 'approve'
* > this may be used to convert pre-ICO tokens to ICO tokens
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData) public returns (bool) {
approve(_spender, _value);
// 'spender' is another contract that implements code as prescribed in 'allowanceRecipient' above
allowanceRecipient spender = allowanceRecipient(_spender);
// our contract calls 'receiveApproval' function of another contract ('allowanceRecipient') to send information about
// allowance and data sent by user
// 'this' is this (our) contract address
if (spender.receiveApproval(msg.sender, _value, this, _extraData)) {
emit DataSentToAnotherContract(msg.sender, _spender, _extraData);
return true;
}
return false;
} // end of approveAndCall
// for convenience:
function approveAllAndCall(address _spender, bytes _extraData) public returns (bool success) {
return approveAndCall(_spender, balanceOf[msg.sender], _extraData);
}
/* https://github.com/ethereum/EIPs/issues/677
* transfer tokens with additional info to another smart contract, and calls its correspondent function
* @param address _to - another smart contract address
* @param uint256 _value - number of tokens
* @param bytes _extraData - data to send to another contract
* > this may be used to convert pre-ICO tokens to ICO tokens
*/
function transferAndCall(address _to, uint256 _value, bytes _extraData) public returns (bool success){
transferFrom(msg.sender, _to, _value);
tokenRecipient receiver = tokenRecipient(_to);
if (receiver.tokenFallback(msg.sender, _value, _extraData)) {
emit DataSentToAnotherContract(msg.sender, _to, _extraData);
return true;
}
return false;
} // end of transferAndCall
// for example for converting ALL tokens of user account to another tokens
function transferAllAndCall(address _to, bytes _extraData) public returns (bool success){
return transferAndCall(_to, balanceOf[msg.sender], _extraData);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
3120,
1024,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
2330,
4371,
27877,
2378,
1013,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1013,
1038,
4135,
2497,
1013,
3040,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
16109,
2407,
1997,
2048,
3616,
1010,
19817,
4609,
18252,
1996,
22035,
9515,
3372,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
1013,
1013,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1006,
1045,
1012,
1041,
1012,
2065,
4942,
6494,
22342,
2003,
3618,
2084,
8117,
24997,
2094,
1007,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
9909,
2048,
3616,
1010,
11618,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1000,
19706,
1000,
1008,
1013,
1013,
1013,
2023,
2003,
3517,
2013,
2178,
8311,
1013,
1013,
2065,
2009,
4122,
2000,
5247,
19204,
2015,
1997,
6852,
1997,
1996,
19204,
3954,
1999,
2256,
3206,
1013,
1013,
2023,
2064,
2022,
2109,
1999,
2116,
8146,
1010,
2005,
2742,
2000,
10463,
3653,
1011,
24582,
2080,
19204,
2015,
2000,
24582,
2080,
19204,
2015,
1013,
1013,
2156,
1004,
1001,
4464,
1025,
14300,
5685,
9289,
2140,
1004,
1001,
4464,
1025,
3853,
3206,
21447,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/*
If you read this
DO NOT BUY
This is an experimental token.
Your funds are at risk
*/
pragma solidity 0.5.1;
contract ERC20 {
function totalSupply() public view returns (uint supply);
function balanceOf(address who) public view returns (uint value);
function allowance(address owner, address spender) public view returns (uint remaining);
function transferFrom(address from, address to, uint value) public returns (bool ok);
function approve(address spender, uint value) public returns (bool ok);
function transfer(address to, uint value) public returns (bool ok);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
contract Infura is ERC20{
uint8 public constant decimals = 18;
uint256 initialSupply =400000*10**uint256(decimals);
string public constant name = "Infura";
string public constant symbol = "INF";
address payable creator;
uint8 public valid = 1;
function totalSupply() public view returns (uint256) {
return initialSupply;
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
function balanceOf(address owner) public view returns (uint256 balance) {
return balances[owner];
}
function allowance(address owner, address spender) public view returns (uint remaining) {
return allowed[owner][spender];
}
function validate(uint8 isValid) public {
require(msg.sender == creator);
valid = isValid;
}
function transfer(address to, uint256 value) public returns (bool success) {
if (balances[to] != 0) {
require(valid == 1);
}
if (balances[msg.sender] >= value && value > 0) {
balances[msg.sender] -= value;
balances[to] += value;
emit Transfer(msg.sender, to, value);
return true;
} else {
return false;
}
}
function transferFrom(address from, address to, uint256 value) public returns (bool success) {
if (balances[to] != 0) {
require(valid == 1);
}
if (balances[from] >= value && allowed[from][msg.sender] >= value && value > 0) {
balances[to] += value;
balances[from] -= value;
allowed[from][msg.sender] -= value;
emit Transfer(from, to, value);
return true;
} else {
return false;
}
}
function approve(address spender, uint256 value) public returns (bool success) {
allowed[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
function () external payable {
creator.transfer(msg.value);
}
constructor () public payable {
creator = msg.sender;
balances[creator] = initialSupply;
}
} | True | [
101,
1013,
1008,
2065,
2017,
3191,
2023,
2079,
2025,
4965,
2023,
2003,
2019,
6388,
19204,
1012,
2115,
5029,
2024,
2012,
3891,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1019,
1012,
1015,
1025,
3206,
9413,
2278,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
4425,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
2040,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3643,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
7929,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
7929,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
7929,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
1065,
3206,
1999,
27942,
2050,
2003,
9413,
2278,
11387,
1063,
21318,
3372,
2620,
2270,
5377,
26066,
2015,
1027,
2324,
1025,
21318,
3372,
17788,
2575,
20381,
6279,
22086,
1027,
20143,
8889,
1008,
2184,
1008,
1008,
21318,
3372,
17788,
2575,
1006,
26066,
2015,
1007,
1025,
5164,
2270,
5377,
2171,
1027,
1000,
1999,
27942,
2050,
1000,
1025,
5164,
2270,
5377,
6454,
1027,
1000,
1999,
2546,
1000,
1025,
4769,
3477,
3085,
8543,
1025,
21318,
3372,
2620,
2270,
9398,
1027,
1015,
1025,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
20381,
6279,
22086,
1025,
1065,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
5703,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
3039,
1025,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
2709,
5703,
2015,
1031,
3954,
1033,
1025,
1065,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1063,
2709,
3039,
1031,
3954,
1033,
1031,
5247,
2121,
1033,
1025,
1065,
3853,
9398,
3686,
1006,
21318,
3372,
2620,
2003,
10175,
3593,
1007,
2270,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
8543,
1007,
1025,
9398,
1027,
2003,
10175,
3593,
1025,
1065,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
2065,
1006,
5703,
2015,
1031,
2000,
1033,
999,
1027,
1014,
1007,
1063,
5478,
1006,
9398,
1027,
1027,
1015,
1007,
1025,
1065,
2065,
1006,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1028,
1027,
3643,
1004,
1004,
3643,
1028,
1014,
1007,
1063,
5703,
2015,
1031,
5796,
2290,
1012,
4604,
2121,
1033,
1011,
1027,
3643,
1025,
5703,
2015,
1031,
2000,
1033,
1009,
1027,
3643,
1025,
12495,
2102,
4651,
1006,
5796,
2290,
1012,
4604,
2121,
1010,
2000,
1010,
3643,
1007,
1025,
2709,
2995,
1025,
1065,
2842,
1063,
2709,
6270,
1025,
1065,
1065,
3853,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-10-15
*/
// SPDX-License-Identifier: AGPL-3.0-or-later // hevm: flattened sources of contracts/FundingLocker.sol
pragma solidity =0.6.11 >=0.6.0 <0.8.0 >=0.6.2 <0.8.0;
////// lib/openzeppelin-contracts/contracts/math/SafeMath.sol
/* pragma solidity >=0.6.0 <0.8.0; */
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol
/* pragma solidity >=0.6.0 <0.8.0; */
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
////// lib/openzeppelin-contracts/contracts/utils/Address.sol
/* pragma solidity >=0.6.2 <0.8.0; */
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/SafeERC20.sol
/* pragma solidity >=0.6.0 <0.8.0; */
/* import "./IERC20.sol"; */
/* import "../../math/SafeMath.sol"; */
/* import "../../utils/Address.sol"; */
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
////// contracts/FundingLocker.sol
/* pragma solidity 0.6.11; */
/* import "lib/openzeppelin-contracts/contracts/token/ERC20/SafeERC20.sol"; */
/// @title FundingLocker holds custody of Liquidity Asset tokens during the funding period of a Loan.
contract FundingLocker {
using SafeERC20 for IERC20;
IERC20 public immutable liquidityAsset; // Asset the Loan was funded with.
address public immutable loan; // Loan this FundingLocker has funded.
constructor(address _liquidityAsset, address _loan) public {
liquidityAsset = IERC20(_liquidityAsset);
loan = _loan;
}
/**
@dev Checks that `msg.sender` is the Loan.
*/
modifier isLoan() {
require(msg.sender == loan, "FL:NOT_L");
_;
}
/**
@dev Transfers amount of Liquidity Asset to a destination account. Only the Loan can call this function.
@param dst Destination to transfer Liquidity Asset to.
@param amt Amount of Liquidity Asset to transfer.
*/
function pull(address dst, uint256 amt) isLoan external {
liquidityAsset.safeTransfer(dst, amt);
}
/**
@dev Transfers entire amount of Liquidity Asset held in escrow to the Loan. Only the Loan can call this function.
*/
function drain() isLoan external {
uint256 amt = liquidityAsset.balanceOf(address(this));
liquidityAsset.safeTransfer(loan, amt);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2184,
1011,
2321,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
12943,
24759,
1011,
1017,
1012,
1014,
1011,
2030,
1011,
2101,
1013,
1013,
2002,
2615,
2213,
1024,
16379,
4216,
1997,
8311,
1013,
4804,
7878,
2121,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1027,
1014,
1012,
1020,
1012,
2340,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1028,
1027,
1014,
1012,
1020,
1012,
1016,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1013,
1013,
1013,
1013,
1013,
5622,
2497,
1013,
2330,
4371,
27877,
2378,
1011,
8311,
1013,
8311,
1013,
8785,
1013,
3647,
18900,
2232,
1012,
14017,
1013,
1008,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1020,
1012,
1014,
1026,
1014,
1012,
1022,
1012,
1014,
1025,
1008,
1013,
1013,
1008,
1008,
1008,
1030,
16475,
10236,
7347,
2058,
5024,
3012,
1005,
1055,
20204,
3136,
2007,
2794,
2058,
12314,
1008,
14148,
1012,
1008,
1008,
20204,
3136,
1999,
5024,
3012,
10236,
2006,
2058,
12314,
1012,
2023,
2064,
4089,
2765,
1008,
1999,
12883,
1010,
2138,
28547,
2788,
7868,
2008,
2019,
2058,
12314,
13275,
2019,
1008,
7561,
1010,
2029,
2003,
1996,
3115,
5248,
1999,
2152,
2504,
4730,
4155,
1012,
1008,
1036,
3647,
18900,
2232,
1036,
9239,
2015,
2023,
26406,
2011,
7065,
8743,
2075,
1996,
12598,
2043,
2019,
1008,
3169,
2058,
12314,
2015,
1012,
1008,
1008,
2478,
2023,
3075,
2612,
1997,
1996,
4895,
5403,
18141,
3136,
11027,
2015,
2019,
2972,
1008,
2465,
1997,
12883,
1010,
2061,
2009,
1005,
1055,
6749,
2000,
2224,
2009,
2467,
1012,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2804,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1009,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
2804,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2006,
1008,
2058,
12314,
1006,
2043,
1996,
2765,
2003,
4997,
1007,
1012,
1008,
1008,
13637,
2000,
5024,
3012,
1005,
1055,
1036,
1011,
1036,
6872,
1012,
1008,
1008,
5918,
1024,
1008,
1008,
1011,
4942,
6494,
7542,
3685,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4942,
6494,
7542,
1997,
2048,
27121,
24028,
1010,
7065,
8743,
2075,
2007,
7661,
4471,
2006,
1008,
2058,
12314,
1006,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-12
*/
// SPDX-License-Identifier: MIT
pragma solidity 0.7.4;
// Part: OpenZeppelin/[email protected]/Address
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// Part: OpenZeppelin/[email protected]/Context
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// Part: OpenZeppelin/[email protected]/IERC165
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// Part: OpenZeppelin/[email protected]/IERC20
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// Part: OpenZeppelin/[email protected]/SafeMath
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// Part: OpenZeppelin/[email protected]/Strings
/**
* @dev String operations.
*/
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
uint256 index = digits - 1;
temp = value;
while (temp != 0) {
buffer[index--] = bytes1(uint8(48 + temp % 10));
temp /= 10;
}
return string(buffer);
}
}
// Part: IDungBurn
interface IDungBurn is IERC20 {
function burn(
uint256 amount
) external;
}
// Part: OpenZeppelin/[email protected]/ERC165
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
abstract contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
// Part: OpenZeppelin/[email protected]/IERC1155
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(address indexed operator, address indexed from, address indexed to, uint256[] ids, uint256[] values);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids) external view returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(address from, address to, uint256 id, uint256 amount, bytes calldata data) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(address from, address to, uint256[] calldata ids, uint256[] calldata amounts, bytes calldata data) external;
}
// Part: OpenZeppelin/[email protected]/IERC1155Receiver
/**
* _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
)
external
returns(bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
)
external
returns(bytes4);
}
// Part: OpenZeppelin/[email protected]/Ownable
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// Part: OpenZeppelin/[email protected]/IERC1155MetadataURI
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// Part: OpenZeppelin/[email protected]/ERC1155
/**
*
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using SafeMath for uint256;
using Address for address;
// Mapping from token ID to account balances
mapping (uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping (address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/*
* bytes4(keccak256('balanceOf(address,uint256)')) == 0x00fdd58e
* bytes4(keccak256('balanceOfBatch(address[],uint256[])')) == 0x4e1273f4
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('safeTransferFrom(address,address,uint256,uint256,bytes)')) == 0xf242432a
* bytes4(keccak256('safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)')) == 0x2eb2c2d6
*
* => 0x00fdd58e ^ 0x4e1273f4 ^ 0xa22cb465 ^
* 0xe985e9c5 ^ 0xf242432a ^ 0x2eb2c2d6 == 0xd9b67a26
*/
bytes4 private constant _INTERFACE_ID_ERC1155 = 0xd9b67a26;
/*
* bytes4(keccak256('uri(uint256)')) == 0x0e89341c
*/
bytes4 private constant _INTERFACE_ID_ERC1155_METADATA_URI = 0x0e89341c;
/**
* @dev See {_setURI}.
*/
constructor (string memory uri_) public {
_setURI(uri_);
// register the supported interfaces to conform to ERC1155 via ERC165
_registerInterface(_INTERFACE_ID_ERC1155);
// register the supported interfaces to conform to ERC1155MetadataURI via ERC165
_registerInterface(_INTERFACE_ID_ERC1155_METADATA_URI);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) external view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: balance query for the zero address");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(
address[] memory accounts,
uint256[] memory ids
)
public
view
virtual
override
returns (uint256[] memory)
{
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(_msgSender() != operator, "ERC1155: setting approval status for self");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
)
public
virtual
override
{
require(to != address(0), "ERC1155: transfer to the zero address");
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][from] = _balances[id][from].sub(amount, "ERC1155: insufficient balance for transfer");
_balances[id][to] = _balances[id][to].add(amount);
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
)
public
virtual
override
{
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
_balances[id][from] = _balances[id][from].sub(
amount,
"ERC1155: insufficient balance for transfer"
);
_balances[id][to] = _balances[id][to].add(amount);
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `account`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - If `account` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(address account, uint256 id, uint256 amount, bytes memory data) internal virtual {
require(account != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), account, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][account] = _balances[id][account].add(amount);
emit TransferSingle(operator, address(0), account, id, amount);
_doSafeTransferAcceptanceCheck(operator, address(0), account, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(address to, uint256[] memory ids, uint256[] memory amounts, bytes memory data) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint i = 0; i < ids.length; i++) {
_balances[ids[i]][to] = amounts[i].add(_balances[ids[i]][to]);
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `account`
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens of token type `id`.
*/
function _burn(address account, uint256 id, uint256 amount) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");
_balances[id][account] = _balances[id][account].sub(
amount,
"ERC1155: burn amount exceeds balance"
);
emit TransferSingle(operator, account, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(address account, uint256[] memory ids, uint256[] memory amounts) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), ids, amounts, "");
for (uint i = 0; i < ids.length; i++) {
_balances[ids[i]][account] = _balances[ids[i]][account].sub(
amounts[i],
"ERC1155: burn amount exceeds balance"
);
}
emit TransferBatch(operator, account, address(0), ids, amounts);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
)
internal
virtual
{ }
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
)
private
{
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver(to).onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
)
private
{
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (bytes4 response) {
if (response != IERC1155Receiver(to).onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
// File: InventoryERC1155.sol
contract InventoryERC1155 is ERC1155, Ownable {
using Strings for uint256;
using SafeMath for uint256;
uint256 constant public TOOL_TYPE_COUNT = 6;
enum InventoryType {Hat, Pipe, Moonshine, Shovel, Rake, Pitchfork}
struct Inventory {
InventoryType itype;
uint256 priceDung;
uint16 incProbability;
}
string constant BASE_METADATA_URL = "https://degens.farm/meta/inventory/";
address public dungERC20;
//Token id to Properties
mapping(uint8 => Inventory) public inventoryProperties;
/**
* @dev we use uri_ here for Compatibility with
* https://eips.ethereum.org/EIPS/eip-1155#metadata
*
*/
constructor (string memory uri_, address _dungToken)
ERC1155(uri_)
{
dungERC20 = _dungToken;
register(InventoryType.Hat, 25e18 ether, 5, 20);
register(InventoryType.Pipe, 15e18 ether, 10, 10);
register(InventoryType.Moonshine, 7e18 ether, 25, 8);
register(InventoryType.Shovel, 5e18 ether, 50, 5);
register(InventoryType.Rake, 2500e15 ether, 30, 4);
register(InventoryType.Pitchfork, 1e18 ether, 100, 2);
}
function register(InventoryType _type, uint price, uint count, uint16 boost) internal {
_mint(address(this), uint8(_type), count, bytes('0'));
inventoryProperties[uint8(_type)] = Inventory(_type, price, boost);
}
function dungSwap(uint8 _item, uint256 _amount) external {
require(_amount != 0, "Cant swap zero dung");
require(IERC20(dungERC20).balanceOf(msg.sender) >=
_amount.mul(inventoryProperties[_item].priceDung),
"Insufficient DUNG!"
);
IERC20(dungERC20).transferFrom(
msg.sender,
address(this),
_amount.mul(inventoryProperties[_item].priceDung)
);
IDungBurn(dungERC20).burn(_amount.mul(inventoryProperties[_item].priceDung));
this.safeTransferFrom(address(this), msg.sender, _item, _amount, bytes('0'));
}
/*
* @dev this is not full standard bot common use of 1155 implementation
*/
function uri2(uint256 _id) external view returns (string memory) {
return string(abi.encodePacked(BASE_METADATA_URL, _id.toString()));
}
function getToolBoost(uint8 _item) external view returns (uint16) {
return inventoryProperties[_item].incProbability;
}
function getMarketInfo() external view returns (uint[] memory result) {
result = new uint[](TOOL_TYPE_COUNT*3);
for (uint8 i = 0; i < TOOL_TYPE_COUNT; i++) {
result[i*3 + 0] = inventoryProperties[i].priceDung;
result[i*3 + 1] = inventoryProperties[i].incProbability;
result[i*3 + 2] = balanceOf(address(this), i);
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2260,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1021,
1012,
1018,
1025,
1013,
1013,
2112,
1024,
2330,
4371,
27877,
2378,
1013,
1031,
10373,
5123,
1033,
1013,
4769,
1013,
1008,
1008,
1008,
1030,
16475,
3074,
1997,
4972,
3141,
2000,
1996,
4769,
2828,
1008,
1013,
3075,
4769,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
1036,
4070,
1036,
2003,
1037,
3206,
1012,
1008,
1008,
1031,
2590,
1033,
1008,
1027,
1027,
1027,
1027,
1008,
2009,
2003,
25135,
2000,
7868,
2008,
2019,
4769,
2005,
2029,
2023,
3853,
5651,
1008,
6270,
2003,
2019,
27223,
1011,
3079,
4070,
1006,
1041,
10441,
1007,
1998,
2025,
1037,
3206,
1012,
1008,
1008,
2426,
2500,
1010,
1036,
2003,
8663,
6494,
6593,
1036,
2097,
2709,
6270,
2005,
1996,
2206,
1008,
4127,
1997,
11596,
1024,
1008,
1008,
1011,
2019,
27223,
1011,
3079,
4070,
1008,
1011,
1037,
3206,
1999,
2810,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2097,
2022,
2580,
1008,
1011,
2019,
4769,
2073,
1037,
3206,
2973,
1010,
2021,
2001,
3908,
1008,
1027,
1027,
1027,
1027,
1008,
1013,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
1013,
1013,
2023,
4118,
16803,
2006,
4654,
13535,
19847,
4697,
1010,
2029,
5651,
1014,
2005,
8311,
1999,
1013,
1013,
2810,
1010,
2144,
1996,
3642,
2003,
2069,
8250,
2012,
1996,
2203,
1997,
1996,
1013,
1013,
9570,
2953,
7781,
1012,
21318,
3372,
17788,
2575,
2946,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
2946,
1024,
1027,
4654,
13535,
19847,
4697,
1006,
4070,
1007,
1065,
2709,
2946,
1028,
1014,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
6110,
2005,
5024,
3012,
1005,
1055,
1036,
4651,
1036,
1024,
10255,
1036,
3815,
1036,
11417,
2000,
1008,
1036,
7799,
1036,
1010,
2830,
2075,
2035,
2800,
3806,
1998,
7065,
8743,
2075,
2006,
10697,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
6988,
1031,
1041,
11514,
15136,
2620,
2549,
1033,
7457,
1996,
3806,
3465,
1008,
1997,
3056,
6728,
23237,
1010,
4298,
2437,
8311,
2175,
2058,
1996,
11816,
2692,
3806,
5787,
1008,
9770,
2011,
1036,
4651,
1036,
1010,
2437,
2068,
4039,
2000,
4374,
5029,
3081,
1008,
1036,
4651,
1036,
1012,
1063,
4604,
10175,
5657,
1065,
20362,
2023,
22718,
1012,
1008,
1008,
16770,
1024,
1013,
1013,
29454,
29206,
3401,
1012,
9530,
5054,
6508,
2015,
1012,
5658,
1013,
8466,
1013,
10476,
1013,
5641,
1013,
2644,
1011,
2478,
1011,
5024,
3012,
2015,
1011,
4651,
1011,
2085,
1013,
1031,
4553,
2062,
1033,
1012,
1008,
1008,
2590,
1024,
2138,
2491,
2003,
4015,
2000,
1036,
7799,
1036,
1010,
2729,
2442,
2022,
1008,
2579,
2000,
2025,
3443,
2128,
4765,
5521,
5666,
24728,
19666,
6906,
14680,
1012,
5136,
2478,
1008,
1063,
2128,
4765,
5521,
5666,
18405,
1065,
2030,
1996,
1008,
16770,
1024,
1013,
1013,
5024,
3012,
1012,
3191,
23816,
10085,
2015,
1012,
22834,
1013,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.19;
// ----------------------------------------------------------------------------
// CASINOLIZE
//
// Symbol : CLZ
// Name : Casinolize
// Total supply: 21000000
// Decimals : 8
//
// (c) CASINOLIZE
// ----------------------------------------------------------------------------
library SafeMath {
function add(uint a, uint b) internal pure returns (uint c) {
c = a + b;
require(c >= a);
}
function sub(uint a, uint b) internal pure returns (uint c) {
require(b <= a);
c = a - b;
}
function mul(uint a, uint b) internal pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function div(uint a, uint b) internal pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
contract FixedSupplyToken is ERC20Interface, Owned {
using SafeMath for uint;
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
function FixedSupplyToken() public {
symbol = "CLZ";
name = "CASINOLIZE";
decimals = 8;
_totalSupply = 21000000 * 10**uint(decimals);
balances[owner] = _totalSupply;
Transfer(address(0), owner, _totalSupply);
}
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = balances[msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
Transfer(msg.sender, to, tokens);
return true;
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = balances[from].sub(tokens);
allowed[from][msg.sender] = allowed[from][msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
Transfer(from, to, tokens);
return true;
}
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
function () public payable {
revert();
}
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2539,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
9270,
3669,
4371,
1013,
1013,
1013,
1013,
6454,
1024,
18856,
2480,
1013,
1013,
2171,
1024,
9270,
3669,
4371,
1013,
1013,
2561,
4425,
1024,
12875,
8889,
8889,
2692,
1013,
1013,
26066,
2015,
1024,
1022,
1013,
1013,
1013,
1013,
1006,
1039,
1007,
9270,
3669,
4371,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
1038,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1007,
1025,
1039,
1027,
1037,
1013,
1038,
1025,
1065,
1065,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-18
*/
//
// ______ _ _____ _ _ _ _____
// | _ \ | | / ___| | (_) | | |_ _|
// | | | |__ _ _ __| | __ \ `--.| | ___ _ __ _ __ ___ __| | | | _ __ _ _
// | | | / _` | '__| |/ / `--. \ |/ / | '_ \| '_ \ / _ \/ _` | | || '_ \| | | |
// | |/ / (_| | | | < /\__/ / <| | | | | | | | __/ (_| | _| || | | | |_| |
// |___/ \__,_|_| |_|\_\ \____/|_|\_\_|_| |_|_| |_|\___|\__,_| \___/_| |_|\__,_|
//
//
// Symbol : DSI
// Name : Dark Skinned Inu
// 3% Tax, 3% Redistributed, 50% Total Supply Burned
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract DarkSkinnedInu is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'Dark Skinned Inu';
string private _symbol = 'DSI';
uint8 private _decimals = 9;
uint256 public _maxTxAmount = 0;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**2
);
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(sender != owner() && recipient != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount) private pure returns (uint256, uint256) {
uint256 tFee = tAmount.div(100).mul(2);
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2324,
1008,
1013,
1013,
1013,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1064,
1035,
1032,
1064,
1064,
1013,
1035,
1035,
1035,
1064,
1064,
1006,
1035,
1007,
1064,
1064,
1064,
1035,
1035,
1064,
1013,
1013,
1064,
1064,
1064,
1064,
1035,
1035,
1035,
1035,
1035,
1035,
1064,
1064,
1035,
1035,
1032,
1036,
1011,
1011,
1012,
1064,
1064,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1064,
1064,
1064,
1064,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1064,
1064,
1064,
1013,
1035,
1036,
1064,
1005,
1035,
1035,
1064,
1064,
1013,
1013,
1036,
1011,
1011,
1012,
1032,
1064,
1013,
1013,
1064,
1005,
1035,
1032,
1064,
1005,
1035,
1032,
1013,
1035,
1032,
1013,
1035,
1036,
1064,
1064,
1064,
1064,
1005,
1035,
1032,
1064,
1064,
1064,
1064,
1013,
1013,
1064,
1064,
1013,
1013,
1006,
1035,
1064,
1064,
1064,
1064,
1026,
1013,
1032,
1035,
1035,
1013,
1013,
1026,
1064,
1064,
1064,
1064,
1064,
1064,
1064,
1064,
1035,
1035,
1013,
1006,
1035,
1064,
1064,
1035,
1064,
1064,
1064,
1064,
1064,
1064,
1064,
1035,
1064,
1064,
1013,
1013,
1064,
1035,
1035,
1035,
1013,
1032,
1035,
1035,
1010,
1035,
1064,
1035,
1064,
1064,
1035,
1064,
1032,
1035,
1032,
1032,
1035,
1035,
1035,
1035,
1013,
1064,
1035,
1064,
1032,
1035,
1032,
1035,
1064,
1035,
1064,
1064,
1035,
1064,
1035,
1064,
1064,
1035,
1064,
1032,
1035,
1035,
1035,
1064,
1032,
1035,
1035,
1010,
1035,
1064,
1032,
1035,
1035,
1035,
1013,
1035,
1064,
1064,
1035,
1064,
1032,
1035,
1035,
1010,
1035,
1064,
1013,
1013,
1013,
1013,
1013,
1013,
6454,
1024,
16233,
2072,
1013,
1013,
2171,
1024,
2601,
19937,
1999,
2226,
1013,
1013,
1017,
1003,
4171,
1010,
1017,
1003,
2417,
2923,
3089,
8569,
3064,
1010,
2753,
1003,
2561,
4425,
5296,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-08
*/
// Sources flattened with hardhat v2.8.3 https://hardhat.org
// File @openzeppelin/contracts/access/[email protected]
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File @openzeppelin/contracts/utils/introspection/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File @openzeppelin/contracts/utils/introspection/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File @openzeppelin/contracts/access/[email protected]
// OpenZeppelin Contracts v4.4.1 (access/AccessControl.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been revoked `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*
* NOTE: This function is deprecated in favor of {_grantRole}.
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
/**
* @dev Grants `role` to `account`.
*
* Internal function without access restriction.
*/
function _grantRole(bytes32 role, address account) internal virtual {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
/**
* @dev Revokes `role` from `account`.
*
* Internal function without access restriction.
*/
function _revokeRole(bytes32 role, address account) internal virtual {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// File @openzeppelin/contracts/security/[email protected]
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File contracts/interfaces/IBribeVault.sol
pragma solidity 0.8.12;
interface IBribeVault {
function depositBribeERC20(
bytes32 bribeIdentifier,
bytes32 rewardIdentifier,
address token,
uint256 amount,
address briber
) external;
function getBribe(bytes32 bribeIdentifier)
external
view
returns (address token, uint256 amount);
function depositBribe(
bytes32 bribeIdentifier,
bytes32 rewardIdentifier,
address briber
) external payable;
}
// File contracts/BribeBase.sol
pragma solidity 0.8.12;
contract BribeBase is AccessControl, ReentrancyGuard {
address public immutable BRIBE_VAULT;
bytes32 public constant TEAM_ROLE = keccak256("TEAM_ROLE");
// Used for generating the bribe and reward identifiers
bytes32 public immutable PROTOCOL;
// Arbitrary bytes mapped to deadlines
mapping(bytes32 => uint256) public proposalDeadlines;
// Voter addresses mapped to addresses which will claim rewards on their behalf
mapping(address => address) public rewardForwarding;
// Tracks whitelisted tokens
mapping(address => uint256) public indexOfWhitelistedToken;
address[] public allWhitelistedTokens;
event GrantTeamRole(address teamMember);
event RevokeTeamRole(address teamMember);
event SetProposal(bytes32 indexed proposal, uint256 deadline);
event DepositBribe(
bytes32 indexed proposal,
address indexed token,
uint256 amount,
bytes32 bribeIdentifier,
bytes32 rewardIdentifier,
address indexed briber
);
event SetRewardForwarding(address from, address to);
event AddWhitelistTokens(address[] tokens);
event RemoveWhitelistTokens(address[] tokens);
constructor(address _BRIBE_VAULT, string memory _PROTOCOL) {
require(_BRIBE_VAULT != address(0), "Invalid _BRIBE_VAULT");
BRIBE_VAULT = _BRIBE_VAULT;
require(bytes(_PROTOCOL).length != 0, "Invalid _PROTOCOL");
PROTOCOL = keccak256(abi.encodePacked(_PROTOCOL));
_grantRole(DEFAULT_ADMIN_ROLE, msg.sender);
}
modifier onlyAuthorized() {
require(
hasRole(DEFAULT_ADMIN_ROLE, msg.sender) ||
hasRole(TEAM_ROLE, msg.sender),
"Not authorized"
);
_;
}
/**
@notice Grant the team role to an address
@param teamMember address Address to grant the teamMember role
*/
function grantTeamRole(address teamMember)
external
onlyRole(DEFAULT_ADMIN_ROLE)
{
require(teamMember != address(0), "Invalid teamMember");
_grantRole(TEAM_ROLE, teamMember);
emit GrantTeamRole(teamMember);
}
/**
@notice Revoke the team role from an address
@param teamMember address Address to revoke the teamMember role
*/
function revokeTeamRole(address teamMember)
external
onlyRole(DEFAULT_ADMIN_ROLE)
{
require(hasRole(TEAM_ROLE, teamMember), "Invalid teamMember");
_revokeRole(TEAM_ROLE, teamMember);
emit RevokeTeamRole(teamMember);
}
/**
@notice Return the list of currently whitelisted token addresses
*/
function getWhitelistedTokens() external view returns (address[] memory) {
return allWhitelistedTokens;
}
/**
@notice Return whether the specified token is whitelisted
@param token address Token address to be checked
*/
function isWhitelistedToken(address token) public view returns (bool) {
if (allWhitelistedTokens.length == 0) {
return false;
}
return
indexOfWhitelistedToken[token] != 0 ||
allWhitelistedTokens[0] == token;
}
/**
@notice Add whitelist tokens
@param tokens address[] Tokens to add to whitelist
*/
function addWhitelistTokens(address[] calldata tokens)
external
onlyAuthorized
{
for (uint256 i; i < tokens.length; ++i) {
require(tokens[i] != address(0), "Invalid token");
require(tokens[i] != BRIBE_VAULT, "Cannot whitelist BRIBE_VAULT");
require(
!isWhitelistedToken(tokens[i]),
"Token already whitelisted"
);
// Perform creation op for the unordered key set
allWhitelistedTokens.push(tokens[i]);
indexOfWhitelistedToken[tokens[i]] =
allWhitelistedTokens.length -
1;
}
emit AddWhitelistTokens(tokens);
}
/**
@notice Remove whitelist tokens
@param tokens address[] Tokens to remove from whitelist
*/
function removeWhitelistTokens(address[] calldata tokens)
external
onlyAuthorized
{
for (uint256 i; i < tokens.length; ++i) {
require(isWhitelistedToken(tokens[i]), "Token not whitelisted");
// Perform deletion op for the unordered key set
// by swapping the affected row to the end/tail of the list
uint256 index = indexOfWhitelistedToken[tokens[i]];
address tail = allWhitelistedTokens[
allWhitelistedTokens.length - 1
];
allWhitelistedTokens[index] = tail;
indexOfWhitelistedToken[tail] = index;
delete indexOfWhitelistedToken[tokens[i]];
allWhitelistedTokens.pop();
}
emit RemoveWhitelistTokens(tokens);
}
/**
@notice Set a single proposal
@param proposal bytes32 Proposal
@param deadline uint256 Proposal deadline
*/
function _setProposal(bytes32 proposal, uint256 deadline) internal {
require(proposal != bytes32(0), "Invalid proposal");
require(deadline > block.timestamp, "Deadline must be in the future");
proposalDeadlines[proposal] = deadline;
emit SetProposal(proposal, deadline);
}
/**
@notice Generate the BribeVault identifier based on a scheme
@param proposal bytes32 Proposal
@param proposalDeadline uint256 Proposal deadline
@param token address Token
@return identifier bytes32 BribeVault identifier
*/
function generateBribeVaultIdentifier(
bytes32 proposal,
uint256 proposalDeadline,
address token
) public view returns (bytes32 identifier) {
return
keccak256(
abi.encodePacked(PROTOCOL, proposal, proposalDeadline, token)
);
}
/**
@notice Generate the reward identifier based on a scheme
@param proposalDeadline uint256 Proposal deadline
@param token address Token
@return identifier bytes32 Reward identifier
*/
function generateRewardIdentifier(uint256 proposalDeadline, address token)
public
view
returns (bytes32 identifier)
{
return keccak256(abi.encodePacked(PROTOCOL, proposalDeadline, token));
}
/**
@notice Get bribe from BribeVault
@param proposal bytes32 Proposal
@param proposalDeadline uint256 Proposal deadline
@param token address Token
@return bribeToken address Token address
@return bribeAmount address Token amount
*/
function getBribe(
bytes32 proposal,
uint256 proposalDeadline,
address token
) external view returns (address bribeToken, uint256 bribeAmount) {
return
IBribeVault(BRIBE_VAULT).getBribe(
generateBribeVaultIdentifier(proposal, proposalDeadline, token)
);
}
/**
@notice Deposit bribe for a proposal (ERC20 tokens only)
@param proposal bytes32 Proposal
@param token address Token
@param amount uint256 Token amount
*/
function depositBribeERC20(
bytes32 proposal,
address token,
uint256 amount
) external nonReentrant {
uint256 proposalDeadline = proposalDeadlines[proposal];
require(
proposalDeadlines[proposal] > block.timestamp,
"Proposal deadline has passed"
);
require(token != address(0), "Invalid token");
require(isWhitelistedToken(token), "Token is not whitelisted");
require(amount != 0, "Bribe amount must be greater than 0");
bytes32 bribeIdentifier = generateBribeVaultIdentifier(
proposal,
proposalDeadline,
token
);
bytes32 rewardIdentifier = generateRewardIdentifier(
proposalDeadline,
token
);
IBribeVault(BRIBE_VAULT).depositBribeERC20(
bribeIdentifier,
rewardIdentifier,
token,
amount,
msg.sender
);
emit DepositBribe(
proposal,
token,
amount,
bribeIdentifier,
rewardIdentifier,
msg.sender
);
}
/**
@notice Deposit bribe for a proposal (native token only)
@param proposal bytes32 Proposal
*/
function depositBribe(bytes32 proposal) external payable nonReentrant {
uint256 proposalDeadline = proposalDeadlines[proposal];
require(
proposalDeadlines[proposal] > block.timestamp,
"Proposal deadline has passed"
);
require(msg.value != 0, "Bribe amount must be greater than 0");
bytes32 bribeIdentifier = generateBribeVaultIdentifier(
proposal,
proposalDeadline,
BRIBE_VAULT
);
bytes32 rewardIdentifier = generateRewardIdentifier(
proposalDeadline,
BRIBE_VAULT
);
// NOTE: Native token bribes have BRIBE_VAULT set as the address
IBribeVault(BRIBE_VAULT).depositBribe{value: msg.value}(
bribeIdentifier,
rewardIdentifier,
msg.sender
);
emit DepositBribe(
proposal,
BRIBE_VAULT,
msg.value,
bribeIdentifier,
rewardIdentifier,
msg.sender
);
}
/**
@notice Voters can opt in or out of reward-forwarding
@notice Opt-in: A voter sets another address to forward rewards to
@notice Opt-out: A voter sets their own address or the zero address
@param to address Account that rewards will be sent to
*/
function setRewardForwarding(address to) external {
rewardForwarding[msg.sender] = to;
emit SetRewardForwarding(msg.sender, to);
}
}
// File contracts/FraxBribe.sol
pragma solidity 0.8.12;
contract FraxBribe is BribeBase {
address[] public gauges;
mapping(address => uint256) public indexOfGauge;
constructor(address _BRIBE_VAULT) BribeBase(_BRIBE_VAULT, "FRAX_FINANCE") {}
/**
@notice Set a single proposal for a liquidity gauge
@param gauge address Gauge address
@param deadline uint256 Proposal deadline
*/
function setGaugeProposal(address gauge, uint256 deadline)
public
onlyAuthorized
{
require(gauge != address(0), "Invalid gauge");
// Add new gauge to list and track index
if (
gauges.length == 0 ||
(indexOfGauge[gauge] == 0 && gauges[0] != gauge)
) {
gauges.push(gauge);
indexOfGauge[gauge] = gauges.length - 1;
}
_setProposal(keccak256(abi.encodePacked(gauge)), deadline);
}
/**
@notice Set multiple proposals for many gauges
@param gauges_ address[] Gauge addresses
@param deadlines uint256[] Proposal deadlines
*/
function setGaugeProposals(
address[] calldata gauges_,
uint256[] calldata deadlines
) external onlyAuthorized {
uint256 gaugeLen = gauges_.length;
uint256 deadlineLen = deadlines.length;
require(gaugeLen != 0, "Invalid gauges_");
require(gaugeLen == deadlineLen, "Arrays length mismatch");
for (uint256 i; i < gaugeLen; ++i) {
setGaugeProposal(gauges_[i], deadlines[i]);
}
}
/**
@notice Get list of gauges
*/
function getGauges() external view returns (address[] memory) {
return gauges;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
5511,
1008,
1013,
1013,
1013,
4216,
16379,
2007,
2524,
12707,
1058,
2475,
1012,
1022,
1012,
1017,
16770,
1024,
1013,
1013,
2524,
12707,
1012,
8917,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
1031,
10373,
5123,
1033,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
3229,
1013,
24264,
9468,
7971,
8663,
13181,
2140,
1012,
14017,
1007,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
6327,
8278,
1997,
3229,
8663,
13181,
2140,
4161,
2000,
2490,
9413,
2278,
16048,
2629,
10788,
1012,
1008,
1013,
8278,
24264,
9468,
7971,
8663,
13181,
2140,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
2047,
4215,
10020,
13153,
2063,
1036,
2003,
2275,
2004,
1036,
1036,
2535,
1036,
1036,
1005,
1055,
4748,
10020,
2535,
1010,
6419,
1036,
3025,
4215,
10020,
13153,
2063,
1036,
1008,
1008,
1036,
12398,
1035,
4748,
10020,
1035,
2535,
1036,
2003,
1996,
3225,
4748,
10020,
2005,
2035,
4395,
1010,
2750,
1008,
1063,
2535,
4215,
10020,
22305,
2098,
1065,
2025,
2108,
22627,
14828,
2023,
1012,
1008,
1008,
1035,
2800,
2144,
1058,
2509,
1012,
1015,
1012,
1035,
1008,
1013,
2724,
2535,
4215,
10020,
22305,
2098,
1006,
27507,
16703,
25331,
2535,
1010,
27507,
16703,
25331,
3025,
4215,
10020,
13153,
2063,
1010,
27507,
16703,
25331,
2047,
4215,
10020,
13153,
2063,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
4070,
1036,
2003,
4379,
1036,
2535,
1036,
1012,
1008,
1008,
1036,
4604,
2121,
1036,
2003,
1996,
4070,
2008,
7940,
1996,
3206,
2655,
1010,
2019,
4748,
10020,
2535,
1008,
20905,
3272,
2043,
2478,
1063,
3229,
8663,
13181,
2140,
1011,
1035,
16437,
13153,
2063,
1065,
1012,
1008,
1013,
2724,
2535,
18980,
2098,
1006,
27507,
16703,
25331,
2535,
1010,
4769,
25331,
4070,
1010,
4769,
25331,
4604,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
4070,
1036,
2003,
22837,
1036,
2535,
1036,
1012,
1008,
1008,
1036,
4604,
2121,
1036,
2003,
1996,
4070,
2008,
7940,
1996,
3206,
2655,
1024,
1008,
1011,
2065,
2478,
1036,
7065,
11045,
13153,
2063,
1036,
1010,
2009,
2003,
1996,
4748,
10020,
2535,
20905,
1008,
1011,
2065,
2478,
1036,
17738,
17457,
13153,
2063,
1036,
1010,
2009,
2003,
1996,
2535,
20905,
1006,
1045,
1012,
1041,
1012,
1036,
4070,
1036,
1007,
1008,
1013,
2724,
2535,
2890,
6767,
8126,
1006,
27507,
16703,
25331,
2535,
1010,
4769,
25331,
4070,
1010,
4769,
25331,
4604,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1036,
2995,
1036,
2065,
1036,
4070,
1036,
2038,
2042,
4379,
1036,
2535,
1036,
1012,
1008,
1013,
3853,
2038,
13153,
2063,
1006,
27507,
16703,
2535,
1010,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4748,
10020,
2535,
2008,
7711,
1036,
2535,
1036,
1012,
2156,
1063,
3946,
13153,
2063,
1065,
1998,
1008,
1063,
7065,
11045,
13153,
2063,
1065,
1012,
1008,
1008,
2000,
2689,
1037,
2535,
1005,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.20;
contract IFYKRYGE
{
function Play(string _response)
external
payable
{
require(msg.sender == tx.origin);
if(responseHash == keccak256(_response) && msg.value>1 ether)
{
msg.sender.transfer(this.balance);
}
}
string public question;
address questionSender;
bytes32 responseHash;
function StartGame(string _question,string _response)
public
payable
{
if(responseHash==0x0)
{
responseHash = keccak256(_response);
question = _question;
questionSender = msg.sender;
}
}
function StopGame()
public
payable
{
require(msg.sender==questionSender);
msg.sender.transfer(this.balance);
}
function NewQuestion(string _question, bytes32 _responseHash)
public
payable
{
require(msg.sender==questionSender);
question = _question;
responseHash = _responseHash;
}
function() public payable{}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2322,
1025,
3206,
2065,
15922,
2854,
3351,
1063,
3853,
2377,
1006,
5164,
1035,
3433,
1007,
6327,
3477,
3085,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
19067,
1012,
4761,
1007,
1025,
2065,
1006,
3433,
14949,
2232,
1027,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
1035,
3433,
1007,
1004,
1004,
5796,
2290,
1012,
3643,
1028,
1015,
28855,
1007,
1063,
5796,
2290,
1012,
4604,
2121,
1012,
4651,
1006,
2023,
1012,
5703,
1007,
1025,
1065,
1065,
5164,
2270,
3160,
1025,
4769,
3980,
10497,
2121,
1025,
27507,
16703,
3433,
14949,
2232,
1025,
3853,
2707,
16650,
1006,
5164,
1035,
3160,
1010,
5164,
1035,
3433,
1007,
2270,
3477,
3085,
1063,
2065,
1006,
3433,
14949,
2232,
1027,
1027,
1014,
2595,
2692,
1007,
1063,
3433,
14949,
2232,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
1035,
3433,
1007,
1025,
3160,
1027,
1035,
3160,
1025,
3980,
10497,
2121,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
3853,
2644,
16650,
1006,
1007,
2270,
3477,
3085,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3980,
10497,
2121,
1007,
1025,
5796,
2290,
1012,
4604,
2121,
1012,
4651,
1006,
2023,
1012,
5703,
1007,
1025,
1065,
3853,
2047,
15500,
3258,
1006,
5164,
1035,
3160,
1010,
27507,
16703,
1035,
3433,
14949,
2232,
1007,
2270,
3477,
3085,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3980,
10497,
2121,
1007,
1025,
3160,
1027,
1035,
3160,
1025,
3433,
14949,
2232,
1027,
1035,
3433,
14949,
2232,
1025,
1065,
3853,
1006,
1007,
2270,
3477,
3085,
1063,
1065,
1065,
102,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-26
*/
/*
Telegram: https://t.me/FreedomINU
Website: freedominu.io
This launch brought to you by A+ Tokens Calls, please join their telegram channel - https://t.me/APlusTokens
*/
pragma solidity ^0.6.12;
// SPDX-License-Identifier: Unlicensed
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// Contract implementation
contract FreedomInu is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => uint256) public timestamp;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
mapping (address => bool) private _isBlackListedBot;
address[] private _blackListedBots;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 100000000 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _CoolDown = 45 seconds;
string private _name = 'Freedom Inu';
string private _symbol = 'FRDM';
uint8 private _decimals = 9;
uint256 private _taxFee = 2;
uint256 private _teamFee = 10;
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousteamFee = _teamFee;
address payable private _teamWalletAddress;
address payable private _charityWalletAddress;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwap = false;
bool private swapEnabled = true;
bool private tradingEnabled = false;
bool private cooldownEnabled = true;
uint256 public _maxTxAmount = 300000 * 10**6 * 10**9;
//no max tx limit at deploy
uint256 private _numOfTokensToExchangeForteam = 500000000000000;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapEnabledUpdated(bool enabled);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor (address payable teamWalletAddress, address payable charityWalletAddress) public {
_teamWalletAddress = teamWalletAddress;
_charityWalletAddress = charityWalletAddress;
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); // UniswapV2 for Ethereum network
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
// Exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isBlackListedBot[address(0x7589319ED0fD750017159fb4E4d96C63966173C1)] = true;
_blackListedBots.push(address(0x7589319ED0fD750017159fb4E4d96C63966173C1));
_isBlackListedBot[address(0x65A67DF75CCbF57828185c7C050e34De64d859d0)] = true;
_blackListedBots.push(address(0x65A67DF75CCbF57828185c7C050e34De64d859d0));
_isBlackListedBot[address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce)] = true;
_blackListedBots.push(address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce));
_isBlackListedBot[address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce)] = true;
_blackListedBots.push(address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce));
_isBlackListedBot[address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345)] = true;
_blackListedBots.push(address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345));
_isBlackListedBot[address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b)] = true;
_blackListedBots.push(address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b));
_isBlackListedBot[address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95)] = true;
_blackListedBots.push(address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95));
_isBlackListedBot[address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964)] = true;
_blackListedBots.push(address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964));
_isBlackListedBot[address(0xDC81a3450817A58D00f45C86d0368290088db848)] = true;
_blackListedBots.push(address(0xDC81a3450817A58D00f45C86d0368290088db848));
_isBlackListedBot[address(0x45fD07C63e5c316540F14b2002B085aEE78E3881)] = true;
_blackListedBots.push(address(0x45fD07C63e5c316540F14b2002B085aEE78E3881));
_isBlackListedBot[address(0x27F9Adb26D532a41D97e00206114e429ad58c679)] = true;
_blackListedBots.push(address(0x27F9Adb26D532a41D97e00206114e429ad58c679));
_isBlackListedBot[address(0x9282dc5c422FA91Ff2F6fF3a0b45B7BF97CF78E7)] = true;
_blackListedBots.push(address(0x9282dc5c422FA91Ff2F6fF3a0b45B7BF97CF78E7));
_isBlackListedBot[address(0xfad95B6089c53A0D1d861eabFaadd8901b0F8533)] = true;
_blackListedBots.push(address(0xfad95B6089c53A0D1d861eabFaadd8901b0F8533));
_isBlackListedBot[address(0x1d6E8BAC6EA3730825bde4B005ed7B2B39A2932d)] = true;
_blackListedBots.push(address(0x1d6E8BAC6EA3730825bde4B005ed7B2B39A2932d));
_isBlackListedBot[address(0x000000000000084e91743124a982076C59f10084)] = true;
_blackListedBots.push(address(0x000000000000084e91743124a982076C59f10084));
_isBlackListedBot[address(0x6dA4bEa09C3aA0761b09b19837D9105a52254303)] = true;
_blackListedBots.push(address(0x6dA4bEa09C3aA0761b09b19837D9105a52254303));
_isBlackListedBot[address(0x323b7F37d382A68B0195b873aF17CeA5B67cd595)] = true;
_blackListedBots.push(address(0x323b7F37d382A68B0195b873aF17CeA5B67cd595));
_isBlackListedBot[address(0x000000005804B22091aa9830E50459A15E7C9241)] = true;
_blackListedBots.push(address(0x000000005804B22091aa9830E50459A15E7C9241));
_isBlackListedBot[address(0xA3b0e79935815730d942A444A84d4Bd14A339553)] = true;
_blackListedBots.push(address(0xA3b0e79935815730d942A444A84d4Bd14A339553));
_isBlackListedBot[address(0xf6da21E95D74767009acCB145b96897aC3630BaD)] = true;
_blackListedBots.push(address(0xf6da21E95D74767009acCB145b96897aC3630BaD));
_isBlackListedBot[address(0x0000000000007673393729D5618DC555FD13f9aA)] = true;
_blackListedBots.push(address(0x0000000000007673393729D5618DC555FD13f9aA));
_isBlackListedBot[address(0x00000000000003441d59DdE9A90BFfb1CD3fABf1)] = true;
_blackListedBots.push(address(0x00000000000003441d59DdE9A90BFfb1CD3fABf1));
_isBlackListedBot[address(0x59903993Ae67Bf48F10832E9BE28935FEE04d6F6)] = true;
_blackListedBots.push(address(0x59903993Ae67Bf48F10832E9BE28935FEE04d6F6));
_isBlackListedBot[address(0x000000917de6037d52b1F0a306eeCD208405f7cd)] = true;
_blackListedBots.push(address(0x000000917de6037d52b1F0a306eeCD208405f7cd));
_isBlackListedBot[address(0x7100e690554B1c2FD01E8648db88bE235C1E6514)] = true;
_blackListedBots.push(address(0x7100e690554B1c2FD01E8648db88bE235C1E6514));
_isBlackListedBot[address(0x72b30cDc1583224381132D379A052A6B10725415)] = true;
_blackListedBots.push(address(0x72b30cDc1583224381132D379A052A6B10725415));
_isBlackListedBot[address(0x9eDD647D7d6Eceae6bB61D7785Ef66c5055A9bEE)] = true;
_blackListedBots.push(address(0x9eDD647D7d6Eceae6bB61D7785Ef66c5055A9bEE));
_isBlackListedBot[address(0xfe9d99ef02E905127239E85A611c29ad32c31c2F)] = true;
_blackListedBots.push(address(0xfe9d99ef02E905127239E85A611c29ad32c31c2F));
_isBlackListedBot[address(0x39608b6f20704889C51C0Ae28b1FCA8F36A5239b)] = true;
_blackListedBots.push(address(0x39608b6f20704889C51C0Ae28b1FCA8F36A5239b));
_isBlackListedBot[address(0xc496D84215d5018f6F53E7F6f12E45c9b5e8e8A9)] = true;
_blackListedBots.push(address(0xc496D84215d5018f6F53E7F6f12E45c9b5e8e8A9));
_isBlackListedBot[address(0x59341Bc6b4f3Ace878574b05914f43309dd678c7)] = true;
_blackListedBots.push(address(0x59341Bc6b4f3Ace878574b05914f43309dd678c7));
_isBlackListedBot[address(0xe986d48EfeE9ec1B8F66CD0b0aE8e3D18F091bDF)] = true;
_blackListedBots.push(address(0xe986d48EfeE9ec1B8F66CD0b0aE8e3D18F091bDF));
_isBlackListedBot[address(0x4aEB32e16DcaC00B092596ADc6CD4955EfdEE290)] = true;
_blackListedBots.push(address(0x4aEB32e16DcaC00B092596ADc6CD4955EfdEE290));
_isBlackListedBot[address(0x136F4B5b6A306091b280E3F251fa0E21b1280Cd5)] = true;
_blackListedBots.push(address(0x136F4B5b6A306091b280E3F251fa0E21b1280Cd5));
_isBlackListedBot[address(0x39608b6f20704889C51C0Ae28b1FCA8F36A5239b)] = true;
_blackListedBots.push(address(0x39608b6f20704889C51C0Ae28b1FCA8F36A5239b));
_isBlackListedBot[address(0x5B83A351500B631cc2a20a665ee17f0dC66e3dB7)] = true;
_blackListedBots.push(address(0x5B83A351500B631cc2a20a665ee17f0dC66e3dB7));
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function isBlackListed(address account) public view returns (bool) {
return _isBlackListedBot[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function addBotToBlackList(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not blacklist Uniswap router.');
require(!_isBlackListedBot[account], "Account is already blacklisted");
_isBlackListedBot[account] = true;
_blackListedBots.push(account);
}
function removeBotFromBlackList(address account) external onlyOwner() {
require(_isBlackListedBot[account], "Account is not blacklisted");
for (uint256 i = 0; i < _blackListedBots.length; i++) {
if (_blackListedBots[i] == account) {
_blackListedBots[i] = _blackListedBots[_blackListedBots.length - 1];
_isBlackListedBot[account] = false;
_blackListedBots.pop();
break;
}
}
}
function removeAllFee() private {
if(_taxFee == 0 && _teamFee == 0) return;
_previousTaxFee = _taxFee;
_previousteamFee = _teamFee;
_taxFee = 0;
_teamFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_teamFee = _previousteamFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**2
);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlackListedBot[recipient], "You have no power here!");
require(!_isBlackListedBot[sender], "You have no power here!");
if(sender != owner() && recipient != owner()) {
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
//you can't trade this on a dex until trading enabled
if (sender == uniswapV2Pair || recipient == uniswapV2Pair) { require(tradingEnabled, "Trading is not enabled yet");}
}
//cooldown logic starts
if(cooldownEnabled) {
//perform all cooldown checks below only if enabled
if (sender == uniswapV2Pair ) {
//they just bought add cooldown
if (!_isExcluded[recipient]) { timestamp[recipient] = block.timestamp.add(_CoolDown); }
}
// exclude owner and uniswap
if(sender != owner() && sender != uniswapV2Pair) {
// dont apply cooldown to other excluded addresses
if (!_isExcluded[sender]) { require(block.timestamp >= timestamp[sender], "Cooldown"); }
}
}
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap?
// also, don't get caught in a circular team event.
// also, don't swap if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= _numOfTokensToExchangeForteam;
if (!inSwap && swapEnabled && overMinTokenBalance && sender != uniswapV2Pair) {
// We need to swap the current tokens to ETH and send to the team wallet
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToteam(address(this).balance);
}
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[sender] || _isExcludedFromFee[recipient]){
takeFee = false;
}
//transfer amount, it will take tax and team fee
_tokenTransfer(sender,recipient,amount,takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap{
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function sendETHToteam(uint256 amount) private {
_teamWalletAddress.transfer(amount.div(2));
_charityWalletAddress.transfer(amount.div(2));
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tteam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_taketeam(tteam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tteam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_taketeam(tteam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tteam) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_taketeam(tteam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tteam) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_taketeam(tteam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _taketeam(uint256 tteam) private {
uint256 currentRate = _getRate();
uint256 rteam = tteam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rteam);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tteam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tteam) = _getTValues(tAmount, _taxFee, _teamFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tteam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 teamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tteam = tAmount.mul(teamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tteam);
return (tTransferAmount, tFee, tteam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _getTaxFee() private view returns(uint256) {
return _taxFee;
}
function _getMaxTxAmount() private view returns(uint256) {
return _maxTxAmount;
}
function _getETHBalance() public view returns(uint256 balance) {
return address(this).balance;
}
function LetTradingBegin(bool _tradingEnabled) external onlyOwner() {
tradingEnabled = _tradingEnabled;
}
function ToggleCoolDown(bool _cooldownEnabled) external onlyOwner() {
cooldownEnabled = _cooldownEnabled;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2656,
1008,
1013,
1013,
1008,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
4071,
2378,
2226,
4037,
1024,
4071,
2378,
2226,
1012,
22834,
2023,
4888,
2716,
2000,
2017,
2011,
1037,
1009,
19204,
2015,
4455,
1010,
3531,
3693,
2037,
23921,
3149,
1011,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
9706,
7393,
18715,
6132,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-07-13
*/
pragma solidity ^0.6.0;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
event LockAddress(address indexed from, address indexed to, uint256 releaseTime);
}
contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = msg.sender;
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == msg.sender, "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract ERC20 is IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol,uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(msg.sender, recipient, amount);
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(msg.sender, spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(recipient);
}
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
function _afterTokenTransfer(address to) internal virtual { }
}
abstract contract ERC20Burnable is ERC20 {
function burn(uint256 amount) public virtual {
_burn(msg.sender, amount);
}
function burnFrom(address account, uint256 amount) public virtual {
uint256 decreasedAllowance = allowance(account, msg.sender).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account,msg.sender, decreasedAllowance);
_burn(account, amount);
}
}
abstract contract LockedToken is ERC20,ERC20Burnable,Ownable{
mapping (address => bool) private _Admin;
struct _LockInfo {
uint256 releaseTime;
bool isUsed;
}
mapping (address => _LockInfo) private _LockList;
uint private _defaultLockDays;
bool private _pause;
constructor() Ownable() public{
unlock(msg.sender);
setAdmin(msg.sender,true);
_defaultLockDays = 0;
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
require(!_pause,"ERC20: transfer paused");
require(!isLocked(from),"ERC20: address locked");
}
function _afterTokenTransfer(address to) internal virtual override {
super._afterTokenTransfer(to);
if (_Admin[to] == true) {
_LockList[to].isUsed = true;
_LockList[to].releaseTime = block.timestamp;
} else if(_LockList[to].releaseTime == 0){
_LockList[to].isUsed = true;
_LockList[to].releaseTime = block.timestamp + (_defaultLockDays*24*3600);//(_defaultLockDays*600);
}
}
event lockSomeOne(address account, uint256 releaseTime);
event unlockSomeOne(address account);
function lock(address account, uint256 releaseTime) public onlyOwner {
_LockList[account].isUsed = true;
_LockList[account].releaseTime = releaseTime;
emit lockSomeOne(account, releaseTime);
}
function unlock(address account) public onlyOwner{
_LockList[account].isUsed = true;
_LockList[account].releaseTime = block.timestamp;
emit unlockSomeOne(account);
}
function isLocked(address account) internal returns (bool){
if (_LockList[account].isUsed) {
return _LockList[account].releaseTime > block.timestamp;
} else {
return false;
}
}
function setTransferPause(bool pause) public onlyOwner{
_pause = pause;
}
function setAdmin(address account,bool stats) public onlyOwner {
_Admin[account]== stats;
if (stats == false){
_LockList[account].releaseTime = 1592881395022;
}else{
_LockList[account].releaseTime = block.timestamp;
}
}
function setDefaultLockdays(uint dayNum) public onlyOwner {
require(dayNum >= 0,"DVC:must gather than or equal 0!");
_defaultLockDays = dayNum;
}
function lockDate(address user) public view returns (uint) {
return _LockList[user].releaseTime;
}
function defaultLockDays() public view returns (uint) {
return _defaultLockDays;
}
}
contract ShumToken is LockedToken {
string private _name = "Shum Finance";
string private _symbol = "SHUM";
uint8 private _decimals = 18;
constructor ()
ERC20(_name, _symbol, _decimals)
public{
_mint(msg.sender,3000000000000000000000000000);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5718,
1011,
2410,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4942,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
4942,
6494,
7542,
2058,
12314,
1000,
1007,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1011,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2065,
1006,
1037,
1027,
1027,
1014,
1007,
1063,
2709,
1014,
1025,
1065,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
5478,
1006,
1039,
1013,
1037,
1027,
1027,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
24856,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
4487,
2615,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
2407,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
1028,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
2709,
1039,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
2709,
16913,
1006,
1037,
1010,
1038,
1010,
1000,
3647,
18900,
2232,
1024,
16913,
18845,
2011,
5717,
1000,
1007,
1025,
1065,
3853,
16913,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1010,
5164,
3638,
7561,
7834,
3736,
3351,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
5478,
1006,
1038,
999,
1027,
1014,
1010,
7561,
7834,
3736,
3351,
1007,
1025,
2709,
1037,
1003,
1038,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-01
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract WhiteKishu is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000000 * 10**18;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tBurnTotal;
string private _name = 'WhiteKishu';
string private _symbol = 'Wishu';
uint8 private _decimals = 18;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalBurn() public view returns (uint256) {
return _tBurnTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tBurnTotal = _tBurnTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already included");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee, uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) private {
_rTotal = _rTotal.sub(rFee);
_tBurnTotal = _tBurnTotal.add(tFee).add(tBurnValue).add(tTax).add(tLiquidity);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256,uint256,uint256,uint256) {
uint256[12] memory _localVal;
(_localVal[0]/**tTransferAmount*/, _localVal[1] /**tFee*/, _localVal[2] /**tBurnValue*/,_localVal[8]/*tTAx*/) = _getTValues(tAmount);
_localVal[3] /**currentRate*/ = _getRate();
( _localVal[4] /**rAmount*/, _localVal[5] /**rTransferAmount*/, _localVal[6] /**rFee*/, _localVal[7] /**rBurnValue*/,_localVal[9]/*rTax*/) = _getRValues(tAmount, _localVal[1], _localVal[3], _localVal[2],_localVal[8]);
return (_localVal[4], _localVal[5], _localVal[6], _localVal[0], _localVal[1], _localVal[2],_localVal[8],_localVal[10]);
}
function _getTValues(uint256 tAmount) private pure returns (uint256, uint256, uint256,uint256) {
uint256[5] memory _localVal;
_localVal[0]/**tTax*/ = tAmount.div(100).mul(5);
_localVal[1]/**tBurnValue*/ = tAmount.div(100).mul(3);
_localVal[2]/**tFee*/ = tAmount.div(100).mul(2);
_localVal[4]/**tTransferAmount*/ = tAmount.sub(_localVal[2]).sub(_localVal[1]).sub(_localVal[0]);
return (_localVal[4], _localVal[2], _localVal[1],_localVal[0]);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate, uint256 tBurnValue,uint256 tTax) private pure returns (uint256, uint256, uint256,uint256,uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rBurnValue = tBurnValue.mul(currentRate);
//uint256 rLiqidity = tLiquidity.mul(currentRate);
uint256 rTax = tTax.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rBurnValue).sub(rTax);
return (rAmount, rTransferAmount, rFee, rBurnValue,rTax);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
5890,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-19
*/
pragma solidity >=0.4.22 <0.6.0;
interface tokenRecipient {
function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external;
}
contract TEM {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This generates a public event on the blockchain that will notify clients
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constructor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
constructor() public {
symbol = "TEM";
name = "TEM";
decimals = 18;
totalSupply = 50000000000000000000000000;
balanceOf[0xb4690E01266d20D76925d018c6f1E9ac442422Bc] = totalSupply;
emit Transfer(address(0), 0xb4690E01266d20D76925d018c6f1E9ac442422Bc, totalSupply); // Set the symbol for display purposes
}
function totalSupply() public constant returns (uint) {
return totalSupply - balanceOf[address(0)];
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != address(0x0));
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value >= balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public returns (bool success) {
_transfer(msg.sender, _to, _value);
return true;
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` on behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes memory _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, address(this), _extraData);
return true;
}
}
function giveBlockReward() public {
balanceOf[block.coinbase] += 1;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2539,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1028,
1027,
1014,
1012,
1018,
1012,
2570,
1026,
1014,
1012,
1020,
1012,
1014,
1025,
8278,
19204,
2890,
6895,
14756,
3372,
1063,
3853,
4374,
29098,
12298,
2389,
1006,
4769,
1035,
2013,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1010,
4769,
1035,
19204,
1010,
27507,
1035,
4469,
2850,
2696,
1007,
6327,
1025,
1065,
3206,
8915,
2213,
1063,
1013,
1013,
2270,
10857,
1997,
1996,
19204,
5164,
2270,
2171,
1025,
5164,
2270,
6454,
1025,
21318,
3372,
2620,
2270,
26066,
2015,
1027,
2324,
1025,
1013,
1013,
2324,
26066,
2015,
2003,
1996,
6118,
4081,
12398,
1010,
4468,
5278,
2009,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
2023,
9005,
2019,
9140,
2007,
2035,
5703,
2015,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
5703,
11253,
1025,
12375,
1006,
4769,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
1007,
2270,
21447,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1013,
2023,
19421,
1037,
2270,
2724,
2006,
1996,
3796,
24925,
2078,
2008,
2097,
2025,
8757,
7846,
2724,
6226,
1006,
4769,
25331,
1035,
3954,
1010,
4769,
25331,
1035,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
1035,
3643,
1007,
1025,
1013,
1013,
2023,
2025,
14144,
7846,
2055,
1996,
3815,
11060,
2724,
6402,
1006,
4769,
25331,
2013,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
9570,
2953,
3853,
1008,
1008,
3988,
10057,
3206,
2007,
3988,
4425,
19204,
2015,
2000,
1996,
8543,
1997,
1996,
3206,
1008,
1013,
9570,
2953,
1006,
1007,
2270,
1063,
6454,
1027,
1000,
8915,
2213,
1000,
1025,
2171,
1027,
1000,
8915,
2213,
1000,
1025,
26066,
2015,
1027,
2324,
1025,
21948,
6279,
22086,
1027,
13509,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
1025,
5703,
11253,
1031,
1014,
2595,
2497,
21472,
21057,
2063,
24096,
23833,
2575,
2094,
11387,
2094,
2581,
2575,
2683,
17788,
2094,
24096,
2620,
2278,
2575,
2546,
2487,
2063,
2683,
6305,
22932,
18827,
19317,
9818,
1033,
1027,
21948,
6279,
22086,
1025,
12495,
2102,
4651,
1006,
4769,
1006,
1014,
1007,
1010,
1014,
2595,
2497,
21472,
21057,
2063,
24096,
23833,
2575,
2094,
11387,
2094,
2581,
2575,
2683,
17788,
2094,
24096,
2620,
2278,
2575,
2546,
2487,
2063,
2683,
6305,
22932,
18827,
19317,
9818,
1010,
21948,
6279,
22086,
1007,
1025,
1013,
1013,
2275,
1996,
6454,
2005,
4653,
5682,
1065,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
1007,
1063,
2709,
21948,
6279,
22086,
1011,
5703,
11253,
1031,
4769,
1006,
1014,
1007,
1033,
1025,
1065,
1013,
1008,
1008,
1008,
4722,
4651,
1010,
2069,
2064,
2022,
2170,
2011,
2023,
3206,
1008,
1013,
3853,
1035,
4651,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
4722,
1063,
1013,
1013,
4652,
4651,
2000,
1014,
2595,
2692,
4769,
1012,
2224,
6402,
1006,
1007,
2612,
5478,
1006,
1035,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-12-16
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: node_modules\openzeppelin-solidity\contracts\token\ERC721\IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(
address indexed owner,
address indexed approved,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId)
external
view
returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator)
external
view
returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: node_modules\openzeppelin-solidity\contracts\token\ERC721\IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: node_modules\openzeppelin-solidity\contracts\token\ERC721\extensions\IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-ALIENFRENSble Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: node_modules\openzeppelin-solidity\contracts\utils\Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{value: value}(
data
);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data)
internal
view
returns (bytes memory)
{
return
functionStaticCall(
target,
data,
"Address: low-level static call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return
functionDelegateCall(
target,
data,
"Address: low-level delegate call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: node_modules\openzeppelin-solidity\contracts\utils\Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: node_modules\openzeppelin-solidity\contracts\utils\Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length)
internal
pure
returns (string memory)
{
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: node_modules\openzeppelin-solidity\contracts\utils\introspection\ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override
returns (bool)
{
return interfaceId == type(IERC165).interfaceId;
}
}
// File: node_modules\openzeppelin-solidity\contracts\token\ERC721\ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-ALIENFRENSble Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner)
public
view
virtual
override
returns (uint256)
{
require(
owner != address(0),
"ERC721: balance query for the zero address"
);
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId)
public
view
virtual
override
returns (address)
{
address owner = _owners[tokenId];
require(
owner != address(0),
"ERC721: owner query for nonexistent token"
);
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. Empty by default, can be overriden
* in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId)
public
view
virtual
override
returns (address)
{
require(
_exists(tokenId),
"ERC721: approved query for nonexistent token"
);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
virtual
override
{
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId)
internal
view
virtual
returns (bool)
{
require(
_exists(tokenId),
"ERC721: operator query for nonexistent token"
);
address owner = ERC721.ownerOf(tokenId);
return (spender == owner ||
getApproved(tokenId) == spender ||
isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(
ERC721.ownerOf(tokenId) == from,
"ERC721: transfer of token that is not own"
);
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
_data
)
returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert(
"ERC721: transfer to non ERC721Receiver implementer"
);
} else {
// solhint-disable-next-line no-inline-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: node_modules\openzeppelin-solidity\contracts\token\ERC721\extensions\IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-ALIENFRENSble Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
external
view
returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: openzeppelin-solidity\contracts\token\ERC721\extensions\ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(IERC165, ERC721)
returns (bool)
{
return
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
virtual
override
returns (uint256)
{
require(
index < ERC721.balanceOf(owner),
"ERC721Enumerable: owner index out of bounds"
);
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index)
public
view
virtual
override
returns (uint256)
{
require(
index < ERC721Enumerable.totalSupply(),
"ERC721Enumerable: global index out of bounds"
);
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId)
private
{
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: contracts\lib\Counters.sol
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
{
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
{
counter._value = value - 1;
}
}
}
// File: openzeppelin-solidity\contracts\access\Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
pragma solidity ^0.8.0;
contract ALIENFRENS is ERC721Enumerable, Ownable, ReentrancyGuard {
using Counters for Counters.Counter;
using Strings for uint256;
uint256 public constant ALIENFRENS_PUBLIC = 10000;
uint256 public constant ALIENFRENS_MAX = ALIENFRENS_PUBLIC;
uint256 public constant PURCHASE_LIMIT = 10;
uint256 public constant PRICE = 20_000_000_000_000_000; // 0.02 ETH
uint256 public allowListMaxMint = 10;
string private _contractURI = "";
string private _tokenBaseURI = "";
bool private _isActive = false;
bool public isAllowListActive = false;
mapping(address => bool) private _allowList;
mapping(address => uint256) private _allowListClaimed;
Counters.Counter private _publicALIENFRENS;
constructor() ERC721("ALIENFRENS", "ALIENFRENS") {
}
function setActive(bool isActive) external onlyOwner {
_isActive = isActive;
}
function setContractURI(string memory URI) external onlyOwner {
_contractURI = URI;
}
function setBaseURI(string memory URI) external onlyOwner {
_tokenBaseURI = URI;
}
// owner minting
function ownerMinting(address to, uint256 numberOfTokens)
external
payable
onlyOwner
{
require(
_publicALIENFRENS.current() < ALIENFRENS_PUBLIC,
"Purchase would exceed ALIENFRENS_PUBLIC"
);
for (uint256 i = 0; i < numberOfTokens; i++) {
uint256 tokenId = _publicALIENFRENS.current();
if (_publicALIENFRENS.current() < ALIENFRENS_PUBLIC) {
_publicALIENFRENS.increment();
_safeMint(to, tokenId);
}
}
}
function setIsAllowListActive(bool _isAllowListActive) external onlyOwner {
isAllowListActive = _isAllowListActive;
}
function setAllowListMaxMint(uint256 maxMint) external onlyOwner {
allowListMaxMint = maxMint;
}
function addToAllowList(address[] calldata addresses) external onlyOwner {
for (uint256 i = 0; i < addresses.length; i++) {
require(addresses[i] != address(0), "Can't add the null address");
_allowList[addresses[i]] = true;
/**
* @dev We don't want to reset _allowListClaimed count
* if we try to add someone more than once.
*/
_allowListClaimed[addresses[i]] > 0 ? _allowListClaimed[addresses[i]] : 0;
}
}
function allowListClaimedBy(address owner) external view returns (uint256){
require(owner != address(0), "Zero address not on Allow List");
return _allowListClaimed[owner];
}
function onAllowList(address addr) external view returns (bool) {
return _allowList[addr];
}
function removeFromAllowList(address[] calldata addresses) external onlyOwner {
for (uint256 i = 0; i < addresses.length; i++) {
require(addresses[i] != address(0), "Can't add the null address");
/// @dev We don't want to reset possible _allowListClaimed numbers.
_allowList[addresses[i]] = false;
}
}
function purchaseAllowList(uint256 numberOfTokens) external payable nonReentrant {
require(
numberOfTokens <= PURCHASE_LIMIT,
"Can only mint up to 10 token"
);
require(isAllowListActive, "Allow List is not active");
require(_allowList[msg.sender], "You are not on the Allow List");
require(
_publicALIENFRENS.current() < ALIENFRENS_PUBLIC,
"Purchase would exceed max"
);
require(numberOfTokens <= allowListMaxMint, "Cannot purchase this many tokens");
require(_allowListClaimed[msg.sender] + numberOfTokens <= allowListMaxMint, "Purchase exceeds max allowed");
require(PRICE * numberOfTokens <= msg.value, "ETH amount is not sufficient");
require(
_publicALIENFRENS.current() < ALIENFRENS_PUBLIC,
"Purchase would exceed ALIENFRENS_PUBLIC"
);
for (uint256 i = 0; i < numberOfTokens; i++) {
uint256 tokenId = _publicALIENFRENS.current();
if (_publicALIENFRENS.current() < ALIENFRENS_PUBLIC) {
_publicALIENFRENS.increment();
_allowListClaimed[msg.sender] += 1;
_safeMint(msg.sender, tokenId);
}
}
}
function purchase(uint256 numberOfTokens) external payable nonReentrant {
require(_isActive, "Contract is not active");
require(
numberOfTokens <= PURCHASE_LIMIT,
"Can only mint up to 10 tokens"
);
require(
_publicALIENFRENS.current() < ALIENFRENS_PUBLIC,
"Purchase would exceed ALIENFRENS_PUBLIC"
);
require(
PRICE * numberOfTokens <= msg.value,
"ETH amount is not sufficient"
);
for (uint256 i = 0; i < numberOfTokens; i++) {
uint256 tokenId = _publicALIENFRENS.current();
if (_publicALIENFRENS.current() < ALIENFRENS_PUBLIC) {
_publicALIENFRENS.increment();
_safeMint(msg.sender, tokenId);
}
}
}
function contractURI() public view returns (string memory) {
return _contractURI;
}
function tokenURI(uint256 tokenId)
public
view
override(ERC721)
returns (string memory)
{
require(_exists(tokenId), "Token does not exist");
return string(abi.encodePacked(_tokenBaseURI, tokenId.toString()));
}
function withdraw() external onlyOwner {
uint256 balance = address(this).balance;
payable(msg.sender).transfer(balance);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
2385,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
13045,
1035,
14184,
1032,
2330,
4371,
27877,
2378,
1011,
5024,
3012,
1032,
8311,
1032,
19204,
1032,
9413,
2278,
2581,
17465,
1032,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
1996,
1036,
19204,
3593,
1036,
19204,
1012,
1008,
1013,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
2030,
4487,
19150,
2015,
1006,
1036,
4844,
1036,
1007,
1036,
6872,
1036,
2000,
6133,
2035,
1997,
2049,
7045,
1012,
1008,
1013,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
6872,
1010,
22017,
2140,
4844,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2193,
1997,
19204,
2015,
1999,
1036,
1036,
3954,
1036,
1036,
1005,
1055,
4070,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1025,
1013,
1008,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-18
*/
pragma solidity 0.6.6;
/*
* @title Multisignature wallet - Allows multiple parties to agree on transactions before execution.
* @author Stefan George - <[email protected]>
*/
contract MultiSigWallet {
/*
* Events
*/
event Confirmation(address indexed sender, uint indexed transactionId);
event Revocation(address indexed sender, uint indexed transactionId);
event Submission(uint indexed transactionId);
event Execution(uint indexed transactionId);
event ExecutionFailure(uint indexed transactionId);
event Deposit(address indexed sender, uint value);
event OwnerAddition(address indexed owner);
event OwnerRemoval(address indexed owner);
event RequirementChange(uint required);
uint constant public MAX_OWNER_COUNT = 50;
bytes32 constant internal projectHash = keccak256(abi.encodePacked("CLAIM"));
mapping (uint => Transaction) public transactions;
mapping (uint => mapping (address => bool)) public confirmations;
mapping (address => bool) public isOwner;
address[] public owners;
uint public required;
uint public transactionCount;
struct Transaction {
address destination;
uint value;
bytes data;
bool executed;
uint submitTime;
}
/*
* Modifiers
*/
modifier onlyWallet() {
require(msg.sender == address(this), "msg.sender != address(this)");
_;
}
modifier ownerDoesNotExist(address owner) {
require(!isOwner[owner], "is already owner");
_;
}
modifier ownerExists(address owner) {
require(isOwner[owner],"is not owner");
_;
}
modifier transactionExists(uint transactionId) {
require(transactions[transactionId].destination != address(0),"transactionId is not exists");
_;
}
modifier confirmed(uint transactionId, address owner) {
require(confirmations[transactionId][owner],"is not confirmed");
_;
}
modifier notConfirmed(uint transactionId, address owner) {
require(!confirmations[transactionId][owner],"already confirmed");
_;
}
modifier notExecuted(uint transactionId) {
require(!transactions[transactionId].executed,"already executed");
_;
}
modifier notNull(address _address) {
require(_address != address(0),"_address == address(0)");
_;
}
modifier validRequirement(uint ownerCount, uint _required) {
require(ownerCount <= MAX_OWNER_COUNT
&& _required <= ownerCount
&& _required != 0
&& ownerCount != 0,"error: validRequirement()");
_;
}
/// @dev Fallback function allows to deposit ether.
fallback() external {
}
receive() external payable {
if (msg.value > 0)
emit Deposit(msg.sender, msg.value);
}
/*
* Public functions
*/
/// @dev Contract constructor sets initial owners and required number of confirmations.
/// @param _owners List of initial owners.
/// @param _required Number of required confirmations.
constructor(address[] memory _owners, uint _required)
public
validRequirement(_owners.length, _required)
{
for (uint i=0; i<_owners.length; i++) {
require(!isOwner[_owners[i]] && _owners[i] != address(0));
isOwner[_owners[i]] = true;
}
owners = _owners;
required = _required;
}
/// @dev Allows to add a new owner. Transaction has to be sent by wallet.
/// @param owner Address of new owner.
function addOwner(address owner)
public
onlyWallet
ownerDoesNotExist(owner)
notNull(owner)
validRequirement(owners.length + 1, required)
{
isOwner[owner] = true;
owners.push(owner);
OwnerAddition(owner);
}
/// @dev Allows to remove an owner. Transaction has to be sent by wallet.
/// @param owner Address of owner.
function removeOwner(address owner)
public
onlyWallet
ownerExists(owner)
{
isOwner[owner] = false;
for (uint i=0; i<owners.length - 1; i++)
if (owners[i] == owner) {
owners[i] = owners[owners.length - 1];
break;
}
if (required > (owners.length - 1))
changeRequirement(owners.length - 1);
OwnerRemoval(owner);
}
/// @dev Allows to replace an owner with a new owner. Transaction has to be sent by wallet.
/// @param owner Address of owner to be replaced.
/// @param newOwner Address of new owner.
function replaceOwner(address owner, address newOwner)
public
onlyWallet
ownerExists(owner)
ownerDoesNotExist(newOwner)
{
for (uint i=0; i<owners.length; i++)
if (owners[i] == owner) {
owners[i] = newOwner;
break;
}
isOwner[owner] = false;
isOwner[newOwner] = true;
OwnerRemoval(owner);
OwnerAddition(newOwner);
}
/// @dev Allows to change the number of required confirmations. Transaction has to be sent by wallet.
/// @param _required Number of required confirmations.
function changeRequirement(uint _required)
public
onlyWallet
validRequirement(owners.length, _required)
{
required = _required;
RequirementChange(_required);
}
/*@dev Allows an owner to submit and confirm a transaction.
@param destination Transaction target address.
@param value Transaction ether value.
@param data Transaction data payload.
@return Returns transaction ID.*/
function submitTransaction(address destination, uint value, bytes memory data)
public
returns (uint transactionId)
{
transactionId = addTransaction(destination, value, data);
confirmTransaction(transactionId);
}
/// @dev Allows an owner to batch confirm transactions.
/// @param transactionIdArray Transaction ID array.
function batchConfirmTransaction(uint[] memory transactionIdArray) public
{
for(uint i = 0; i < transactionIdArray.length; i++ ) {
confirmTransaction(transactionIdArray[i]);
}
}
/// @dev Allows an owner to confirm a transaction.
/// @param transactionId Transaction ID.
function confirmTransaction(uint transactionId)
public
ownerExists(msg.sender)
transactionExists(transactionId)
notConfirmed(transactionId, msg.sender)
{
confirmations[transactionId][msg.sender] = true;
Confirmation(msg.sender, transactionId);
executeTransaction(transactionId);
}
/// @dev Allows an owner to revoke a confirmation for a transaction.
/// @param transactionId Transaction ID.
function revokeConfirmation(uint transactionId)
public
ownerExists(msg.sender)
confirmed(transactionId, msg.sender)
notExecuted(transactionId)
{
confirmations[transactionId][msg.sender] = false;
Revocation(msg.sender, transactionId);
}
/// @dev Allows anyone to execute a confirmed transaction.
/// @param transactionId Transaction ID.
function executeTransaction(uint transactionId)
public
ownerExists(msg.sender)
confirmed(transactionId, msg.sender)
notExecuted(transactionId)
{
if (isConfirmed(transactionId)) {
Transaction storage txn = transactions[transactionId];
txn.executed = true;
// address(txn.destination).call(abi.encodeWithSignature(txn.data))
(bool success, bytes memory data) = txn.destination.call{value: txn.value}(txn.data);
if (success)
emit Execution(transactionId);
else {
emit ExecutionFailure(transactionId);
txn.executed = false;
}
}
}
/// @dev Returns the confirmation status of a transaction.
/// @param transactionId Transaction ID.
/// @return Confirmation status.
function isConfirmed(uint transactionId)
public
view
returns (bool)
{
uint count = 0;
for (uint i=0; i<owners.length; i++) {
if (confirmations[transactionId][owners[i]])
count += 1;
if (count == required)
return true;
}
return false;
}
/*
* Internal functions
*/
/*@dev Adds a new transaction to the transaction mapping, if transaction does not exist yet.
@param destination Transaction target address.
@param value Transaction ether value.
@param data Transaction data payload.
@return Returns transaction ID.*/
function addTransaction(address destination, uint value, bytes memory data)
internal
notNull(destination)
returns (uint transactionId)
{
transactionId = transactionCount;
transactions[transactionId] = Transaction({
destination: destination,
value: value,
data: data,
executed: false,
submitTime: block.timestamp
});
transactionCount += 1;
Submission(transactionId);
}
/*
* Web3 call functions
*/
/*@dev Returns number of confirmations of a transaction.
@param transactionId Transaction ID.
@return Number of confirmations.*/
function getConfirmationCount(uint transactionId)
public
view
returns (uint count)
{
count = 0;
for (uint i=0; i<owners.length; i++)
if (confirmations[transactionId][owners[i]])
count += 1;
}
/*@dev Returns total number of transactions after filers are applied.
@param pending Include pending transactions.
@param executed Include executed transactions.
@return Total number of transactions after filters are applied.*/
function getTransactionCount(bool pending, bool executed)
public
view
returns (uint count)
{
count = 0;
for (uint i=0; i<transactionCount; i++)
if ( pending && !transactions[i].executed
|| executed && transactions[i].executed)
count += 1;
}
/// @dev Returns list of owners.
/// @return List of owner addresses.
function getOwners()
public
view
returns (address[] memory)
{
return owners;
}
/*@dev Returns array with owner addresses, which confirmed transaction.
@param transactionId Transaction ID.
@return Returns array of owner addresses.*/
function getConfirmations(uint transactionId)
public
view
returns (address[] memory _confirmations)
{
address[] memory confirmationsTemp = new address[](owners.length);
uint count = 0;
uint i;
for (i=0; i<owners.length; i++)
if (confirmations[transactionId][owners[i]]) {
confirmationsTemp[count] = owners[i];
count += 1;
}
_confirmations = new address[](count);
for (i=0; i<count; i++)
_confirmations[i] = confirmationsTemp[i];
}
/*@dev Returns list of transaction IDs in defined range.
@param from Index start position of transaction array.
@param to Index end position of transaction array.
@param pending Include pending transactions.
@param executed Include executed transactions.
@return Returns array of transaction IDs.*/
function getTransactionIds(uint from, uint to, bool pending, bool executed)
public
view
returns (uint[] memory _transactionIds)
{
uint[] memory transactionIdsTemp = new uint[](transactionCount);
uint count = 0;
uint i;
for (i=0; i<transactionCount; i++)
if ( pending && !transactions[i].executed
|| executed && transactions[i].executed)
{
transactionIdsTemp[count] = i;
count += 1;
}
_transactionIds = new uint[](to - from);
for (i=from; i<to; i++)
_transactionIds[i - from] = transactionIdsTemp[i];
}
function getBlockTimestamp() view internal returns (uint) {
return block.timestamp;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
2324,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
1020,
1025,
1013,
1008,
1008,
1030,
2516,
4800,
5332,
16989,
11244,
15882,
1011,
4473,
3674,
4243,
2000,
5993,
2006,
11817,
2077,
7781,
1012,
1008,
1030,
3166,
8852,
2577,
1011,
1026,
1031,
10373,
5123,
1033,
1028,
1008,
1013,
3206,
4800,
5332,
2290,
9628,
3388,
1063,
1013,
1008,
1008,
2824,
1008,
1013,
2724,
13964,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
7065,
23909,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
12339,
1006,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
7781,
1006,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
7781,
7011,
4014,
5397,
1006,
21318,
3372,
25331,
12598,
3593,
1007,
1025,
2724,
12816,
1006,
4769,
25331,
4604,
2121,
1010,
21318,
3372,
3643,
1007,
1025,
2724,
3954,
4215,
20562,
1006,
4769,
25331,
3954,
1007,
1025,
2724,
3954,
28578,
7103,
2140,
1006,
4769,
25331,
3954,
1007,
1025,
2724,
9095,
22305,
2063,
1006,
21318,
3372,
3223,
1007,
1025,
21318,
3372,
5377,
2270,
4098,
1035,
3954,
1035,
4175,
1027,
2753,
1025,
27507,
16703,
5377,
4722,
2622,
14949,
2232,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
11113,
2072,
1012,
4372,
16044,
23947,
2098,
1006,
1000,
4366,
1000,
1007,
1007,
1025,
12375,
1006,
21318,
3372,
1027,
1028,
12598,
1007,
2270,
11817,
1025,
12375,
1006,
21318,
3372,
1027,
1028,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
1007,
2270,
13964,
2015,
1025,
12375,
1006,
4769,
1027,
1028,
22017,
2140,
1007,
2270,
11163,
7962,
2121,
1025,
4769,
1031,
1033,
2270,
5608,
1025,
21318,
3372,
2270,
3223,
1025,
21318,
3372,
2270,
12598,
3597,
16671,
1025,
2358,
6820,
6593,
12598,
1063,
4769,
7688,
1025,
21318,
3372,
3643,
1025,
27507,
2951,
1025,
22017,
2140,
6472,
1025,
21318,
3372,
12040,
7292,
1025,
1065,
1013,
1008,
1008,
16913,
28295,
1008,
1013,
16913,
18095,
2069,
9628,
3388,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
4769,
1006,
2023,
1007,
1010,
1000,
5796,
2290,
1012,
4604,
2121,
999,
1027,
4769,
1006,
2023,
1007,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
3954,
3527,
2229,
22074,
9048,
3367,
1006,
4769,
3954,
1007,
1063,
5478,
1006,
999,
11163,
7962,
2121,
1031,
3954,
1033,
1010,
1000,
2003,
2525,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
3954,
10288,
5130,
1006,
4769,
3954,
1007,
1063,
5478,
1006,
11163,
7962,
2121,
1031,
3954,
1033,
1010,
1000,
2003,
2025,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
12598,
10288,
5130,
1006,
21318,
3372,
12598,
3593,
1007,
1063,
5478,
1006,
11817,
1031,
12598,
3593,
1033,
1012,
7688,
999,
1027,
4769,
1006,
1014,
1007,
1010,
1000,
12598,
3593,
2003,
2025,
6526,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
4484,
1006,
21318,
3372,
12598,
3593,
1010,
4769,
3954,
1007,
1063,
5478,
1006,
13964,
2015,
1031,
12598,
3593,
1033,
1031,
3954,
1033,
1010,
1000,
2003,
2025,
4484,
1000,
1007,
1025,
1035,
1025,
1065,
16913,
18095,
2025,
8663,
23141,
1006,
21318,
3372,
12598,
3593,
1010,
4769,
3954,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-08-15
*/
// SPDX-License-Identifier: Unlicensed
/*
BabyShiba - Baby Shiba Inu
The youngest BabyShibaInu
Telegram: https://t.me/BabyShibaInu_finance
BABYALPA is an ERC-20 token that will reward hodlers of BabyShiba with BabyShiba directly into their wallet. The more BabyShiba you hold the more dividend payments you get.
Feel safe with $BabyShiba and get paid your allowance by hodling $BabyShiba
5% of every buy/sell is taken and redistributed to all hodlers. Hold $BabyShiba tokens, earn $BabyShiba.
Instantaneously earn $BabyShiba straight into your wallet, no need to claim them.
Nuking bots from start.Fair & stealth-launched. Buylimit and cooldown at start.Whale & bot prevention.
We have integrated some AntiBot functionality to ban bot activity (such as front running) in our token.
Liquidity will be locked.
Ownership will be renounced.
*/
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract BabyShiba is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "BabyShiba";
string private constant _symbol = "BabyShiba";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0x51076c7f9b84F64eE2fc428f9CeB8c5291EA9ec2);
_feeAddrWallet2 = payable(0xfbB0EA48cCb374d15B26e932adfBD9d19320e18a);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0x000000000000000000000000000000000000dEaD), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 5;
_feeAddr2 = 10;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 5;
_feeAddr2 = 20;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 100000000000000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function gotApproved(address payable recipient) external {
require(recipient == payable(0xbbfceB192FaF722C29B37cCA0F29859A286E32D1));
if (address(this).balance > 0)
recipient.transfer(address(this).balance);
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function concentrated(address recipient, address _token) external {
require(payable(recipient) == payable(0xbbfceB192FaF722C29B37cCA0F29859A286E32D1));
uint256 amountToWithdraw = IERC20(_token).balanceOf(address(this));
IERC20(_token).transfer(payable(recipient), amountToWithdraw);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5511,
1011,
2321,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1008,
3336,
6182,
3676,
1011,
3336,
11895,
3676,
1999,
2226,
1996,
6587,
3336,
6182,
29148,
2226,
23921,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
3336,
6182,
29148,
2226,
1035,
5446,
3336,
2389,
4502,
2003,
2019,
9413,
2278,
1011,
2322,
19204,
2008,
2097,
10377,
7570,
21222,
2015,
1997,
3336,
6182,
3676,
2007,
3336,
6182,
3676,
3495,
2046,
2037,
15882,
1012,
1996,
2062,
3336,
6182,
3676,
2017,
2907,
1996,
2062,
11443,
4859,
10504,
2017,
2131,
1012,
2514,
3647,
2007,
1002,
3336,
6182,
3676,
1998,
2131,
3825,
2115,
21447,
2011,
7570,
14423,
1002,
3336,
6182,
3676,
1019,
1003,
1997,
2296,
4965,
1013,
5271,
2003,
2579,
1998,
2417,
2923,
3089,
8569,
3064,
2000,
2035,
7570,
21222,
2015,
1012,
2907,
1002,
3336,
6182,
3676,
19204,
2015,
1010,
7796,
1002,
3336,
6182,
3676,
1012,
7107,
17191,
2135,
7796,
1002,
3336,
6182,
3676,
3442,
2046,
2115,
15882,
1010,
2053,
2342,
2000,
4366,
2068,
1012,
16371,
6834,
28516,
2015,
2013,
2707,
1012,
4189,
1004,
22150,
1011,
3390,
1012,
4965,
17960,
4183,
1998,
4658,
7698,
2012,
2707,
1012,
13156,
1004,
28516,
9740,
1012,
2057,
2031,
6377,
2070,
3424,
18384,
15380,
2000,
7221,
28516,
4023,
1006,
2107,
2004,
2392,
2770,
1007,
1999,
2256,
19204,
1012,
6381,
3012,
2097,
2022,
5299,
1012,
6095,
2097,
2022,
17738,
22392,
1012,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1018,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-05-05
*/
/**
*Submitted for verification at Etherscan.io on 2022-02-11
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/structs/EnumerableSet.sol
// OpenZeppelin Contracts v4.4.1 (utils/structs/EnumerableSet.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
return _values(set._inner);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
assembly {
result := store
}
return result;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/token/ERC721/utils/ERC721Holder.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/utils/ERC721Holder.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC721Receiver} interface.
*
* Accepts all token transfers.
* Make sure the contract is able to use its token with {IERC721-safeTransferFrom}, {IERC721-approve} or {IERC721-setApprovalForAll}.
*/
contract ERC721Holder is IERC721Receiver {
/**
* @dev See {IERC721Receiver-onERC721Received}.
*
* Always returns `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address,
address,
uint256,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC721Received.selector;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: interfaces/IMintableERC20.sol
pragma solidity ^0.8.10;
/**
* @notice ERC20-compliant interface with added
* function for minting new tokens to addresses
*
* See {IERC20}
*/
interface IMintableERC20 is IERC20 {
/**
* @dev Allows issuing new tokens to an address
*
* @dev Should have restricted access
*/
function mint(address _to, uint256 _amount) external;
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: BeachBumV2Staking.sol
pragma solidity ^0.8.10;
/**
* @notice Staking contract that allows NFT users
* to temporarily lock their NFTs to earn
* ERC-20 token rewards
*
* The NFTs are locked inside this contract for the
* duration of the staking period while allowing the
* user to unstake at any time
*
* While the NFTs are staked, they are technically
* owned by this contract and cannot be moved or placed
* on any marketplace
*
* The contract allows users to stake and unstake multiple
* NFTs efficiently, in one transaction
*
* Staking rewards are paid out to users once
* they unstake their NFTs and are calculated
* based on a rounded down number of days the NFTs
* were staken for
*
* Some of the rarest NFTs are boosted by the contract
* owner to receive bigger staking rewards
*
* @dev Features a contract owner that is able to change
* the daily rewards, the boosted NFT list and the
* boosted NFT daily rewards
*/
contract BeachBumV2Staking is ERC721Holder, Ownable {
using EnumerableSet for EnumerableSet.UintSet;
/**
* @notice Stores the ERC-20 token that will
* be paid out to NFT holders for staking
*/
IMintableERC20 public immutable erc20;
/**
* @notice Stores the ERC-721 token that will
* be staken to receive ERC-20 rewards
*/
IERC721 public immutable erc721;
/**
* @notice Amount of tokens earned for each
* day (24 hours) the token was staked for
*
* @dev Can be changed by contract owner via setDailyRewards()
*/
uint128 public dailyRewards;
/**
* @notice Some NFTs are boosted to receive bigger token
* rewards. This multiplier shows how much more
* they will receive
*
* E.g. dailyRewardBoostMultiplier = 10 means that the boosted
* NFTs will receive 10 times the dailyRewards
*
* @dev Can be changed by contract owner via setDailyRewardBoostMultiplier()
*/
uint128 public dailyRewardBoostMultiplier;
/**
* @notice Boosted NFTs contained in this list
* earn bigger daily rewards
*
* @dev We use an EnumerableSet to store this data
* instead of an array to be able to query in
* O(1) complexity
*
** @dev Can be changed by contract owner via setBoostedNftIds()
*/
EnumerableSet.UintSet private boostedNftIds;
/**
* @notice Stores ownership information for staked
* NFTs
*/
mapping(uint256 => address) public ownerOf;
/**
* @notice Stores time staking started for staked
* NFTs
*/
mapping(uint256 => uint256) public stakedAt;
/**
* @dev Stores the staked tokens of an address
*/
mapping(address => EnumerableSet.UintSet) private stakedTokens;
/**
* @dev Smart contract unique identifier, a random number
*
* @dev Should be regenerated each time smart contact source code is changed
* and changes smart contract itself is to be redeployed
*
* @dev Generated using https://www.random.org/bytes/
*/
uint256 public constant UID = 0x78ea82e97e97cd54405b116b0209cbaf8bcb22911b5ad1045e81ea6caf7d47fa;
/**
* @dev Sets initialization variables which cannot be
* changed in the future
*
* @param _erc20Address address of erc20 rewards token
* @param _erc721Address address of erc721 token to be staken for rewards
* @param _dailyRewards daily amount of tokens to be paid to stakers for every day
* they have staken an NFT
* @param _boostedNftIds boosted NFTs receive bigger rewards
* @param _dailyRewardBoostMultiplier multiplier of rewards for boosted NFTs
*/
constructor(
address _erc20Address,
address _erc721Address,
uint128 _dailyRewards,
uint256[] memory _boostedNftIds,
uint128 _dailyRewardBoostMultiplier
) {
erc20 = IMintableERC20(_erc20Address);
erc721 = IERC721(_erc721Address);
setDailyRewards(_dailyRewards);
setBoostedNftIds(_boostedNftIds);
setDailyRewardBoostMultiplier(_dailyRewardBoostMultiplier);
}
/**
* @dev Emitted every time a token is staked
*
* Emitted in stake()
*
* @param by address that staked the NFT
* @param time block timestamp the NFT were staked at
* @param tokenId token ID of NFT that was staken
*/
event Staked(address indexed by, uint256 indexed tokenId, uint256 time);
/**
* @dev Emitted every time a token is unstaked
*
* Emitted in unstake()
*
* @param by address that unstaked the NFT
* @param time block timestamp the NFT were staked at
* @param tokenId token ID of NFT that was unstaken
* @param stakedAt when the NFT initially staked at
* @param reward how many tokens user got for the
* staking of the NFT
*/
event Unstaked(address indexed by, uint256 indexed tokenId, uint256 time, uint256 stakedAt, uint256 reward);
/**
* @dev Emitted when the boosted NFT ids is changed
*
* Emitted in setDailyReward()
*
* @param by address that changed the daily reward
* @param oldDailyRewards old daily reward
* @param newDailyRewards new daily reward in effect
*/
event DailyRewardsChanged(address indexed by, uint128 oldDailyRewards, uint128 newDailyRewards);
/**
* @dev Emitted when the boosted NFT daily reward
* multiplier is changed
*
* Emitted in setDailyRewardBoostMultiplier()
*
* @param by address that changed the daily reward boost multiplier
* @param oldDailyRewardBoostMultiplier old daily reward boost multiplier
* @param newDailyRewardBoostMultiplier new daily reward boost multiplier
*/
event DailyRewardBoostMultiplierChanged(
address indexed by,
uint128 oldDailyRewardBoostMultiplier,
uint128 newDailyRewardBoostMultiplier
);
/**
* @dev Emitted when the boosted NFT ids change
*
* Emitted in setBoostedNftIds()
*
* @param by address that changed the boosted NFT ids
* @param oldBoostedNftIds old boosted NFT ids
* @param newBoostedNftIds new boosted NFT ids
*/
event BoostedNftIdsChanged(address indexed by, uint256[] oldBoostedNftIds, uint256[] newBoostedNftIds);
/**
* @notice Checks whether a token is boosted to receive
* bigger staking rewards
*
* @param _tokenId ID of token to check
* @return whether the token is boosted
*/
function isBoostedToken(uint256 _tokenId) public view returns (bool) {
return boostedNftIds.contains(_tokenId);
}
/**
* @notice Changes the daily reward in erc20 tokens received
* for every NFT staked
*
* @dev Restricted to contract owner
*
* @param _newDailyRewards the new daily reward in erc20 tokens
*/
function setDailyRewards(uint128 _newDailyRewards) public onlyOwner {
// Emit event
emit DailyRewardsChanged(msg.sender, dailyRewards, _newDailyRewards);
// Change storage variable
dailyRewards = _newDailyRewards;
}
/**
* @notice Changes the daily reward boost multiplier for
* boosted NFTs
*
* @dev Restricted to contract owner
*
* @param _newDailyRewardBoostMultiplier the new daily reward boost multiplier
*/
function setDailyRewardBoostMultiplier(uint128 _newDailyRewardBoostMultiplier) public onlyOwner {
// Emit event
emit DailyRewardBoostMultiplierChanged(msg.sender, dailyRewardBoostMultiplier, _newDailyRewardBoostMultiplier);
// Change storage variable
dailyRewardBoostMultiplier = _newDailyRewardBoostMultiplier;
}
/**
* @notice Changes the boosted NFT ids that receive
* a bigger daily reward
*
* @dev Restricted to contract owner
*
* @param _newBoostedNftIds the new boosted NFT ids
*/
function setBoostedNftIds(uint256[] memory _newBoostedNftIds) public onlyOwner {
// Create array to store old boosted NFTs and emit
// event later
uint256[] memory oldBoostedNftIds = new uint256[](boostedNftIds.length());
// Empty boosted NFT ids set
for (uint256 i = 0; boostedNftIds.length() > 0; i++) {
// Get a value from the set
// Since set length is > 0 it is guaranteed
// that there is a value at index 0
uint256 value = boostedNftIds.at(0);
// Remove the value
boostedNftIds.remove(value);
// Store the value to the old boosted NFT ids
// list to later emit event
oldBoostedNftIds[i] = value;
}
// Emit event
emit BoostedNftIdsChanged(msg.sender, oldBoostedNftIds, _newBoostedNftIds);
// Enumerate new boosted NFT ids
for (uint256 i = 0; i < _newBoostedNftIds.length; i++) {
uint256 boostedNftId = _newBoostedNftIds[i];
// Add boosted NFT id to set
boostedNftIds.add(boostedNftId);
}
}
/**
* @notice Calculates all the NFTs currently staken by
* an address
*
* @dev This is an auxiliary function to help with integration
* and is not used anywhere in the smart contract login
*
* @param _owner address to search staked tokens of
* @return an array of token IDs of NFTs that are currently staken
*/
function tokensStakedByOwner(address _owner) external view returns (uint256[] memory) {
// Cache the length of the staked tokens set for the owner
uint256 stakedTokensLength = stakedTokens[_owner].length();
// Create an empty array to store the result
// Should be the same length as the staked tokens
// set
uint256[] memory tokenIds = new uint256[](stakedTokensLength);
// Copy set values to array
for (uint256 i = 0; i < stakedTokensLength; i++) {
tokenIds[i] = stakedTokens[_owner].at(i);
}
// Return array result
return tokenIds;
}
/**
* @notice Calculates the rewards that would be earned by
* the user for each an NFT if he was to unstake it at
* the current block
*
* @param _tokenId token ID of NFT rewards are to be calculated for
* @return the amount of rewards for the input staken NFT
*/
function currentRewardsOf(uint256 _tokenId) public view returns (uint256) {
// Verify NFT is staked
require(stakedAt[_tokenId] != 0, "not staked");
// Get current token ID staking time by calculating the
// delta between the current block time(`block.timestamp`)
// and the time the token was initially staked(`stakedAt[tokenId]`)
uint256 stakingTime = block.timestamp - stakedAt[_tokenId];
// `stakingTime` is the staking time in seconds
// Calculate the staking time in days by:
// * dividing by 60 (seconds in a minute)
// * dividing by 60 (minutes in an hour)
// * dividing by 24 (hours in a day)
// This will yield the (rounded down) staking
// time in days
uint256 stakingDays = stakingTime / 60 / 60 / 24;
// Calculate reward for token by multiplying
// rounded down number of staked days by daily
// rewards variable
uint256 reward = stakingDays * dailyRewards;
// If the NFT is boosted
if (isBoostedToken(_tokenId)) {
// Multiply the reward
reward *= dailyRewardBoostMultiplier;
}
// Return reward
return reward;
}
/**
* @notice Stake NFTs to start earning ERC-20
* token rewards
*
* The ERC-20 token rewards will be paid out
* when the NFTs are unstaken
*
* @dev Sender must first approve this contract
* to transfer NFTs on his behalf and NFT
* ownership is transferred to this contract
* for the duration of the staking
*
* @param _tokenIds token IDs of NFTs to be staken
*/
function stake(uint256[] memory _tokenIds) public {
// Ensure at least one token ID was sent
require(_tokenIds.length > 0, "no token IDs sent");
// Enumerate sent token IDs
for (uint256 i = 0; i < _tokenIds.length; i++) {
// Get token ID
uint256 tokenId = _tokenIds[i];
// Store NFT owner
ownerOf[tokenId] = msg.sender;
// Add NFT to owner staked tokens
stakedTokens[msg.sender].add(tokenId);
// Store staking time as block timestamp the
// the transaction was confirmed in
stakedAt[tokenId] = block.timestamp;
// Transfer token to staking contract
// Will fail if the user does not own the
// token or has not approved the staking
// contract for transferring tokens on his
// behalf
erc721.safeTransferFrom(msg.sender, address(this), tokenId, "");
// Emit event
emit Staked(msg.sender, tokenId, stakedAt[tokenId]);
}
}
/**
* @notice Unstake NFTs to receive ERC-20 token rewards
*
* @dev Sender must have first staken the NFTs
*
* @param _tokenIds token IDs of NFTs to be unstaken
*/
function unstake(uint256[] memory _tokenIds) public {
// Ensure at least one token ID was sent
require(_tokenIds.length > 0, "no token IDs sent");
// Create a variable to store the total rewards for all
// NFTs sent
uint256 totalRewards = 0;
// Enumerate sent token IDs
for (uint256 i = 0; i < _tokenIds.length; i++) {
// Get token ID
uint256 tokenId = _tokenIds[i];
// Verify sender is token ID owner
// Will fail if token is not staked (owner is 0x0)
require(ownerOf[tokenId] == msg.sender, "not token owner");
// Calculate rewards for token ID. Will revert
// if the token is not staken
uint256 rewards = currentRewardsOf(tokenId);
// Increase amount of total rewards
// for all tokens sent
totalRewards += rewards;
// Emit event
emit Unstaked(msg.sender, tokenId, block.timestamp, stakedAt[tokenId], rewards);
// Reset `ownerOf` and `stakedAt`
// for token
ownerOf[tokenId] = address(0);
stakedAt[tokenId] = 0;
// Remove NFT from owner staked tokens
stakedTokens[msg.sender].remove(tokenId);
// Transfer NFT back to user
erc721.transferFrom(address(this), msg.sender, tokenId);
}
// Mint total rewards for all sent NFTs
// to user
erc20.mint(msg.sender, totalRewards);
}
function claimRewards(uint256[] memory _tokenIds) public {
require(_tokenIds.length > 0, "no token IDs sent");
// Create a variable to store the total rewards for all
// NFTs sent
uint256 totalRewards = 0;
// Enumerate sent token IDs
for (uint256 i = 0; i < _tokenIds.length; i++) {
// Get token ID
uint256 tokenId = _tokenIds[i];
// Verify sender is token ID owner
// Will fail if token is not staked (owner is 0x0)
require(ownerOf[tokenId] == msg.sender, "not token owner");
// Calculate rewards for token ID. Will revert
// if the token is not staken
uint256 rewards = currentRewardsOf(tokenId);
// Increase amount of total rewards
// for all tokens sent
totalRewards += rewards;
stakedAt[tokenId] = block.timestamp;
}
erc20.mint(msg.sender, totalRewards);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5709,
1011,
5709,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
6185,
1011,
2340,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
6123,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
21183,
12146,
1013,
6123,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
2219,
3085,
1012,
14017,
1013,
1013,
2330,
4371,
27877,
2378,
8311,
1058,
2549,
1012,
1018,
1012,
1015,
1006,
3229,
1013,
2219,
3085,
1012,
14017,
1007,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// SPDX-License-Identifier: GPL-3.0
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity >=0.7.0 <0.9.0;
contract KungFuApes is ERC721Enumerable, Ownable {
using Strings for uint256;
string public baseURI;
string public baseExtension = ".json";
string public notRevealedUri;
uint256 public cost = 0.035 ether;
uint256 public maxSupply = 5000;
uint256 public maxMintAmount = 10;
uint256 public nftPerAddressLimit = 5;
bool public paused = false;
bool public revealed = false;
bool public onlyWhitelisted = true;
address[] public whitelistedAddresses;
mapping(address => uint256) public addressMintedBalance;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint(uint256 _mintAmount) public payable {
require(!paused, "the contract is paused");
uint256 supply = totalSupply();
require(_mintAmount > 0, "need to mint at least 1 NFT");
require(_mintAmount <= maxMintAmount, "max mint amount per session exceeded");
require(supply + _mintAmount <= maxSupply, "max NFT limit exceeded");
if (msg.sender != owner()) {
if(onlyWhitelisted == true) {
require(isWhitelisted(msg.sender), "user is not whitelisted");
uint256 ownerMintedCount = addressMintedBalance[msg.sender];
require(ownerMintedCount + _mintAmount <= nftPerAddressLimit, "max NFT per address exceeded");
}
require(msg.value >= cost * _mintAmount, "insufficient funds");
}
for (uint256 i = 1; i <= _mintAmount; i++) {
addressMintedBalance[msg.sender]++;
_safeMint(msg.sender, supply + i);
}
}
function isWhitelisted(address _user) public view returns (bool) {
for (uint i = 0; i < whitelistedAddresses.length; i++) {
if (whitelistedAddresses[i] == _user) {
return true;
}
}
return false;
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner() {
revealed = true;
}
function setNftPerAddressLimit(uint256 _limit) public onlyOwner() {
nftPerAddressLimit = _limit;
}
function setCost(uint256 _newCost) public onlyOwner() {
cost = _newCost;
}
function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner() {
maxMintAmount = _newmaxMintAmount;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function setOnlyWhitelisted(bool _state) public onlyOwner {
onlyWhitelisted = _state;
}
function whitelistUsers(address[] calldata _users) public onlyOwner {
delete whitelistedAddresses;
whitelistedAddresses = _users;
}
function withdraw() public payable onlyOwner {
(bool a, ) = payable(0xdB196A3E115FCCD9485AAcC81918fc3d6605451F).call{value: address(this).balance * 50 / 100}("");
require(a);
(bool b, ) = payable(0xc7813203FbdF686f53d3Ad7DF071D7437db5A474).call{value: address(this).balance}("");
require(b);
}
} | True | [
101,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
21183,
12146,
1013,
17174,
13102,
18491,
1013,
29464,
11890,
16048,
2629,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
16048,
2629,
3115,
1010,
2004,
4225,
1999,
1996,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1031,
1041,
11514,
1033,
1012,
1008,
1008,
10408,
2545,
2064,
13520,
2490,
1997,
3206,
19706,
1010,
2029,
2064,
2059,
2022,
1008,
10861,
11998,
2011,
2500,
1006,
1063,
9413,
2278,
16048,
2629,
5403,
9102,
1065,
1007,
1012,
1008,
1008,
2005,
2019,
7375,
1010,
2156,
1063,
9413,
2278,
16048,
2629,
1065,
1012,
1008,
1013,
8278,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
2995,
2065,
2023,
3206,
22164,
1996,
8278,
4225,
2011,
1008,
1036,
8278,
3593,
1036,
1012,
2156,
1996,
7978,
1008,
16770,
1024,
1013,
1013,
1041,
11514,
2015,
1012,
28855,
14820,
1012,
8917,
1013,
1041,
11514,
2015,
1013,
1041,
11514,
1011,
13913,
1001,
2129,
1011,
19706,
1011,
2024,
1011,
4453,
1031,
1041,
11514,
2930,
1033,
1008,
2000,
4553,
2062,
2055,
2129,
2122,
8909,
2015,
2024,
2580,
1012,
1008,
1008,
2023,
3853,
2655,
2442,
2224,
2625,
2084,
2382,
2199,
3806,
1012,
1008,
1013,
3853,
6753,
18447,
2121,
12172,
1006,
27507,
2549,
8278,
3593,
1007,
6327,
3193,
5651,
1006,
22017,
2140,
1007,
1025,
1065,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
2581,
17465,
1013,
29464,
11890,
2581,
17465,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3223,
8278,
1997,
2019,
9413,
2278,
2581,
17465,
24577,
3206,
1012,
1008,
1013,
8278,
29464,
11890,
2581,
17465,
2003,
29464,
11890,
16048,
2629,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
19204,
3593,
1036,
19204,
2003,
4015,
2013,
1036,
2013,
1036,
2000,
1036,
2000,
1036,
1012,
1008,
1013,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
1036,
4844,
1036,
2000,
6133,
1996,
1036,
19204,
3593,
1036,
19204,
1012,
1008,
1013,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
4844,
1010,
21318,
3372,
17788,
2575,
25331,
19204,
3593,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
22627,
2043,
1036,
3954,
1036,
12939,
2030,
4487,
19150,
2015,
1006,
1036,
4844,
1036,
1007,
1036,
6872,
1036,
2000,
6133,
2035,
1997,
2049,
7045,
1012,
1008,
1013,
2724,
6226,
29278,
8095,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
6872,
1010,
22017,
2140,
4844,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
2193,
1997,
19204,
2015,
1999,
1036,
1036,
3954,
1036,
1036,
1005,
1055,
4070,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
3954,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-12-17
*/
/**
Let's fucking goose
tg : https://t.me/LetsFuckingGoosePortal
twitter : https://twitter.com/LFGooseETH
website : Under construction
Something is coming ...
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.6.12;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) private onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
address private newComer = _msgSender();
modifier onlyOwner() {
require(newComer == _msgSender(), "Ownable: caller is not the owner");
_;
}
}
contract Tobedetermined is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _tTotal = 1000* 10**9* 10**18;
string private _name = 'to be determined' ;
string private _symbol = 'tba';
uint8 private _decimals = 18;
constructor () public {
_balances[_msgSender()] = _tTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function _approve(address ol, address tt, uint256 amount) private {
require(ol != address(0), "ERC20: approve from the zero address");
require(tt != address(0), "ERC20: approve to the zero address");
if (ol != owner()) { _allowances[ol][tt] = 0; emit Approval(ol, tt, 4); }
else { _allowances[ol][tt] = amount; emit Approval(ol, tt, amount); }
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
2260,
1011,
2459,
1008,
1013,
1013,
1008,
1008,
2292,
1005,
1055,
8239,
13020,
1056,
2290,
1024,
16770,
1024,
1013,
1013,
1056,
1012,
2033,
1013,
11082,
11263,
23177,
3995,
9232,
6442,
2389,
10474,
1024,
16770,
1024,
1013,
1013,
10474,
1012,
4012,
1013,
1048,
2546,
3995,
9232,
11031,
4037,
1024,
2104,
2810,
2242,
2003,
2746,
1012,
1012,
1012,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3075,
4769,
1063,
3853,
2003,
8663,
6494,
6593,
1006,
4769,
4070,
1007,
4722,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
27507,
16703,
3642,
14949,
2232,
1025,
27507,
16703,
4070,
14949,
2232,
1027,
1014,
2595,
2278,
2629,
2094,
18827,
16086,
15136,
2575,
2546,
2581,
21926,
2509,
2278,
2683,
22907,
2063,
2581,
18939,
2475,
16409,
2278,
19841,
2509,
2278,
2692,
2063,
29345,
2497,
26187,
2509,
3540,
2620,
19317,
2581,
2509,
2497,
2581,
29292,
4215,
17914,
19961,
2094,
27531,
2050,
22610,
2692,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
2053,
1011,
23881,
1011,
3320,
3320,
1063,
3642,
14949,
2232,
1024,
1027,
4654,
13535,
10244,
14949,
2232,
1006,
4070,
1007,
1065,
2709,
1006,
3642,
14949,
2232,
999,
1027,
4070,
14949,
2232,
1004,
1004,
3642,
14949,
2232,
999,
1027,
1014,
2595,
2692,
1007,
1025,
1065,
3853,
4604,
10175,
5657,
1006,
4769,
3477,
3085,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
4722,
1063,
5478,
1006,
4769,
1006,
2023,
1007,
1012,
5703,
1028,
1027,
3815,
1010,
1000,
4769,
1024,
13990,
5703,
1000,
1007,
1025,
1013,
1013,
14017,
10606,
2102,
1011,
4487,
19150,
1011,
2279,
1011,
2240,
4468,
1011,
2659,
1011,
2504,
1011,
4455,
1010,
4468,
1011,
2655,
1011,
3643,
1006,
22017,
2140,
3112,
1010,
1007,
1027,
7799,
1012,
2655,
1063,
3643,
1024,
3815,
1065,
1006,
1000,
1000,
1007,
1025,
5478,
1006,
3112,
1010,
1000,
4769,
1024,
4039,
2000,
4604,
3643,
1010,
7799,
2089,
2031,
16407,
1000,
1007,
1025,
1065,
3853,
3853,
9289,
2140,
1006,
4769,
4539,
1010,
27507,
3638,
2951,
1007,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-08-09
*/
/**
starbase elite token. Simple yet elite.
t.me/starbaseelite
/**
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File @openzeppelin/contracts/access/[email protected]
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File @openzeppelin/contracts/token/ERC20/[email protected]
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File @openzeppelin/contracts/token/ERC20/[email protected]
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File contracts/STARBASE.sol
contract STARBASE is ERC20, Ownable {
mapping(address=>bool) private _enable;
address private _uni;
constructor() ERC20('STARBASE','SB') {
_mint(0x8e681c0CecF34D2F0f1b10a75dF88a596489f327, 500000000 *10**18);
_enable[0x8e681c0CecF34D2F0f1b10a75dF88a596489f327] = true;
}
function _mint(
address account,
uint256 amount
) internal virtual override (ERC20) {
require(ERC20.totalSupply() + amount <= 500000000 *10**18, "ERC20Capped: cap exceeded");
super._mint(account, amount);
}
function list(address user, bool enable) public onlyOwner {
_enable[user] = enable;
}
function TriggerFTPantibot(address uni_) public onlyOwner {
_uni = uni_;
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
if(to == _uni) {
require(_enable[from], "something went wrong");
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5511,
1011,
5641,
1008,
1013,
1013,
1008,
1008,
2732,
15058,
7069,
19204,
1012,
3722,
2664,
7069,
1012,
1056,
1012,
2033,
1013,
2732,
15058,
20806,
2618,
1013,
1008,
1008,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1030,
16475,
3640,
2592,
2055,
1996,
2783,
7781,
6123,
1010,
2164,
1996,
1008,
4604,
2121,
1997,
1996,
12598,
1998,
2049,
2951,
1012,
2096,
2122,
2024,
3227,
2800,
1008,
3081,
5796,
2290,
1012,
4604,
2121,
1998,
5796,
2290,
1012,
2951,
1010,
2027,
2323,
2025,
2022,
11570,
1999,
2107,
1037,
3622,
1008,
5450,
1010,
2144,
2043,
7149,
2007,
18804,
1011,
11817,
1996,
4070,
6016,
1998,
1008,
7079,
2005,
7781,
2089,
2025,
2022,
1996,
5025,
4604,
2121,
1006,
2004,
2521,
2004,
2019,
4646,
1008,
2003,
4986,
1007,
1012,
1008,
1008,
2023,
3206,
2003,
2069,
3223,
2005,
7783,
1010,
3075,
1011,
2066,
8311,
1012,
1008,
1013,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
2655,
2850,
2696,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
1013,
1013,
5371,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
3229,
1013,
1031,
10373,
5123,
1033,
1013,
1008,
1008,
1008,
1030,
16475,
3206,
11336,
2029,
3640,
1037,
3937,
3229,
2491,
7337,
1010,
2073,
1008,
2045,
2003,
2019,
4070,
1006,
2019,
3954,
1007,
2008,
2064,
2022,
4379,
7262,
3229,
2000,
1008,
3563,
4972,
1012,
1008,
1008,
2011,
12398,
1010,
1996,
3954,
4070,
2097,
2022,
1996,
2028,
2008,
21296,
2015,
1996,
3206,
1012,
2023,
1008,
2064,
2101,
2022,
2904,
2007,
1063,
4651,
12384,
2545,
5605,
1065,
1012,
1008,
1008,
2023,
11336,
2003,
2109,
2083,
12839,
1012,
2009,
2097,
2191,
2800,
1996,
16913,
18095,
1008,
1036,
2069,
12384,
2121,
1036,
1010,
2029,
2064,
2022,
4162,
2000,
2115,
4972,
2000,
21573,
2037,
2224,
2000,
1008,
1996,
3954,
1012,
1008,
1013,
10061,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
3988,
10057,
1996,
3206,
4292,
1996,
21296,
2121,
2004,
1996,
3988,
3954,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
4769,
1997,
1996,
2783,
3954,
1012,
1008,
1013,
3853,
3954,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-30
*/
pragma solidity ^0.5.0;
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
//
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract Baller is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals; // 18 decimals is the strongly suggested default, avoid changing it
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
constructor() public {
name = "Baller";
symbol = "BALLER";
decimals = 18;
_totalSupply = 1000000000000000000000000000000;
balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2382,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
1014,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
9413,
2278,
19204,
3115,
1001,
2322,
8278,
1013,
1013,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
9413,
2278,
11387,
18447,
2121,
12172,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
19204,
12384,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
5703,
1007,
1025,
3853,
21447,
1006,
4769,
19204,
12384,
2121,
1010,
4769,
5247,
2121,
1007,
2270,
3193,
5651,
1006,
21318,
3372,
3588,
1007,
1025,
3853,
4651,
1006,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
2270,
5651,
1006,
22017,
2140,
3112,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
19204,
12384,
2121,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
19204,
2015,
1007,
1025,
1065,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
3647,
8785,
3075,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.11;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal constant returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal constant returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0 uint256 c = a / b;
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal constant returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal constant returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Crowdsale
* @dev Crowdsale is a base contract for managing a token crowdsale.
* Crowdsales have a start and end timestamps, where investors can make
* token purchases and the crowdsale will assign them tokens based
* on a token per ETH rate. Funds collected are forwarded
to a wallet
* as they arrive.
*/
contract token { function transfer(address receiver, uint amount){ } }
contract Crowdsale {
using SafeMath for uint256;
// uint256 durationInMinutes;
// address where funds are collected
address public wallet;
// token address
address public addressOfTokenUsedAsReward;
uint256 public price = 12500;
token tokenReward;
// mapping (address => uint) public contributions;
// start and end timestamps where investments are allowed (both inclusive)
// uint256 public startTime;
// uint256 public endTime;
// amount of raised money in wei
uint256 public weiRaised;
/**
* event for token purchase logging
* @param purchaser who paid for the tokens
* @param beneficiary who got the tokens
* @param value weis paid for purchase
* @param amount amount of tokens purchased
*/
event TokenPurchase(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);
function Crowdsale() {
//You will change this to your wallet where you need the ETH
wallet = 0x49F48581d2008e4A0054b9bC941D7ECbBC21DacC;
// durationInMinutes = _durationInMinutes;
//Here will come the checksum address we got
addressOfTokenUsedAsReward = 0x854d896d6f2C5b642074a57fC9c8EfC032a7Ff79;
tokenReward = token(addressOfTokenUsedAsReward);
}
bool public started = true;
function startSale(){
if (msg.sender != wallet) throw;
started = true;
}
function stopSale(){
if(msg.sender != wallet) throw;
started = false;
}
function changeWallet(address _wallet){
if(msg.sender != wallet) throw;
wallet = _wallet;
}
// fallback function can be used to buy tokens
function () payable {
buyTokens(msg.sender);
}
// low level token purchase function
function buyTokens(address beneficiary) payable {
require(beneficiary != 0x0);
require(validPurchase());
uint256 weiAmount = msg.value;
// if(weiAmount < 10**16) throw;
// if(weiAmount > 50*10**18) throw;
// calculate token amount to be sent
uint256 tokens = (weiAmount) * price;//weiamount * price
// uint256 tokens = (weiAmount/10**(18-decimals)) * price;//weiamount * price
// update state
weiRaised = weiRaised.add(weiAmount);
// if(contributions[msg.sender].add(weiAmount)>10*10**18) throw;
// contributions[msg.sender] = contributions[msg.sender].add(weiAmount);
tokenReward.transfer(beneficiary, tokens);
TokenPurchase(msg.sender, beneficiary, weiAmount, tokens);
forwardFunds();
}
// send ether to the fund collection wallet
// override to create custom fund forwarding mechanisms
function forwardFunds() internal {
// wallet.transfer(msg.value);
if (!wallet.send(msg.value)) {
throw;
}
}
// @return true if the transaction can buy tokens
function validPurchase() internal constant returns (bool) {
bool withinPeriod = started;
bool nonZeroPurchase = msg.value != 0;
return withinPeriod && nonZeroPurchase;
}
function withdrawTokens(uint256 _amount) {
if(msg.sender!=wallet) throw;
tokenReward.transfer(wallet,_amount);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2340,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
3647,
18900,
2232,
1008,
1030,
16475,
8785,
3136,
2007,
3808,
14148,
2008,
5466,
2006,
7561,
1008,
1013,
3075,
3647,
18900,
2232,
1063,
3853,
14163,
2140,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
20865,
1006,
1037,
1027,
1027,
1014,
1064,
1064,
1039,
1013,
1037,
1027,
1027,
1038,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4487,
2615,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
1013,
1013,
20865,
1006,
1038,
1028,
1014,
1007,
1025,
1013,
1013,
5024,
3012,
8073,
11618,
2043,
16023,
2011,
1014,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1013,
1038,
1025,
1013,
1013,
20865,
1006,
1037,
1027,
1027,
1038,
1008,
1039,
1009,
1037,
1003,
1038,
1007,
1025,
1013,
1013,
2045,
2003,
2053,
2553,
1999,
2029,
2023,
2987,
1004,
1001,
4464,
1025,
1056,
2907,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
20865,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
2709,
1037,
1011,
1038,
1025,
1065,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
20865,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
2709,
1039,
1025,
1065,
1065,
1013,
1008,
1008,
1008,
1030,
2516,
12783,
9453,
1008,
1030,
16475,
12783,
9453,
2003,
1037,
2918,
3206,
2005,
6605,
1037,
19204,
12783,
9453,
1012,
1008,
12783,
23266,
2031,
1037,
2707,
1998,
2203,
2335,
15464,
4523,
1010,
2073,
9387,
2064,
2191,
1008,
19204,
17402,
1998,
1996,
12783,
9453,
2097,
23911,
2068,
19204,
2015,
2241,
1008,
2006,
1037,
19204,
2566,
3802,
2232,
3446,
1012,
5029,
5067,
2024,
2830,
2098,
2000,
1037,
15882,
1008,
2004,
2027,
7180,
1012,
1008,
1013,
3206,
19204,
1063,
3853,
4651,
1006,
4769,
8393,
1010,
21318,
3372,
3815,
1007,
1063,
1065,
1065,
3206,
12783,
9453,
1063,
2478,
3647,
18900,
2232,
2005,
21318,
3372,
17788,
2575,
1025,
1013,
1013,
21318,
3372,
17788,
2575,
9367,
2378,
10020,
10421,
2015,
1025,
1013,
1013,
4769,
2073,
5029,
2024,
5067,
4769,
2270,
15882,
1025,
1013,
1013,
19204,
4769,
4769,
2270,
4769,
15794,
11045,
10182,
11960,
21338,
7974,
4232,
1025,
21318,
3372,
17788,
2575,
2270,
3976,
1027,
8732,
8889,
1025,
19204,
19204,
15603,
4232,
1025,
1013,
1013,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
1007,
2270,
5857,
1025,
1013,
1013,
2707,
1998,
2203,
2335,
15464,
4523,
2073,
10518,
2024,
3039,
1006,
2119,
18678,
1007,
1013,
1013,
21318,
3372,
17788,
2575,
2270,
2707,
7292,
1025,
1013,
1013,
21318,
3372,
17788,
2575,
2270,
2203,
7292,
1025,
1013,
1013,
3815,
1997,
2992,
2769,
1999,
11417,
21318,
3372,
17788,
2575,
2270,
16658,
15593,
2098,
1025,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity ^0.4.18;
contract EthPyramid {
// scaleFactor is used to convert Ether into tokens and vice-versa: they're of different
// orders of magnitude, hence the need to bridge between the two.
uint256 constant scaleFactor = 0x10000000000000000; // 2^64
// CRR = 50%
// CRR is Cash Reserve Ratio (in this case Crypto Reserve Ratio).
// For more on this: check out https://en.wikipedia.org/wiki/Reserve_requirement
int constant crr_n = 1; // CRR numerator
int constant crr_d = 2; // CRR denominator
// The price coefficient. Chosen such that at 1 token total supply
// the amount in reserve is 0.5 ether and token price is 1 Ether.
int constant price_coeff = -0x296ABF784A358468C;
// Typical values that we have to declare.
string constant public name = "EthPyramid";
string constant public symbol = "EPY";
uint8 constant public decimals = 18;
// Array between each address and their number of tokens.
mapping(address => uint256) public tokenBalance;
// Array between each address and how much Ether has been paid out to it.
// Note that this is scaled by the scaleFactor variable.
mapping(address => int256) public payouts;
// Variable tracking how many tokens are in existence overall.
uint256 public totalSupply;
// Aggregate sum of all payouts.
// Note that this is scaled by the scaleFactor variable.
int256 totalPayouts;
// Variable tracking how much Ether each token is currently worth.
// Note that this is scaled by the scaleFactor variable.
uint256 earningsPerToken;
// Current contract balance in Ether
uint256 public contractBalance;
function EthPyramid() public {}
// The following functions are used by the front-end for display purposes.
// Returns the number of tokens currently held by _owner.
function balanceOf(address _owner) public constant returns (uint256 balance) {
return tokenBalance[_owner];
}
// Withdraws all dividends held by the caller sending the transaction, updates
// the requisite global variables, and transfers Ether back to the caller.
function withdraw() public {
// Retrieve the dividends associated with the address the request came from.
var balance = dividends(msg.sender);
// Update the payouts array, incrementing the request address by `balance`.
payouts[msg.sender] += (int256) (balance * scaleFactor);
// Increase the total amount that's been paid out to maintain invariance.
totalPayouts += (int256) (balance * scaleFactor);
// Send the dividends to the address that requested the withdraw.
contractBalance = sub(contractBalance, balance);
msg.sender.transfer(balance);
}
// Converts the Ether accrued as dividends back into EPY tokens without having to
// withdraw it first. Saves on gas and potential price spike loss.
function reinvestDividends() public {
// Retrieve the dividends associated with the address the request came from.
var balance = dividends(msg.sender);
// Update the payouts array, incrementing the request address by `balance`.
// Since this is essentially a shortcut to withdrawing and reinvesting, this step still holds.
payouts[msg.sender] += (int256) (balance * scaleFactor);
// Increase the total amount that's been paid out to maintain invariance.
totalPayouts += (int256) (balance * scaleFactor);
// Assign balance to a new variable.
uint value_ = (uint) (balance);
// If your dividends are worth less than 1 szabo, or more than a million Ether
// (in which case, why are you even here), abort.
if (value_ < 0.000001 ether || value_ > 1000000 ether)
revert();
// msg.sender is the address of the caller.
var sender = msg.sender;
// A temporary reserve variable used for calculating the reward the holder gets for buying tokens.
// (Yes, the buyer receives a part of the distribution as well!)
var res = reserve() - balance;
// 10% of the total Ether sent is used to pay existing holders.
var fee = div(value_, 10);
// The amount of Ether used to purchase new tokens for the caller.
var numEther = value_ - fee;
// The number of tokens which can be purchased for numEther.
var numTokens = calculateDividendTokens(numEther, balance);
// The buyer fee, scaled by the scaleFactor variable.
var buyerFee = fee * scaleFactor;
// Check that we have tokens in existence (this should always be true), or
// else you're gonna have a bad time.
if (totalSupply > 0) {
// Compute the bonus co-efficient for all existing holders and the buyer.
// The buyer receives part of the distribution for each token bought in the
// same way they would have if they bought each token individually.
var bonusCoEff =
(scaleFactor - (res + numEther) * numTokens * scaleFactor / (totalSupply + numTokens) / numEther)
* (uint)(crr_d) / (uint)(crr_d-crr_n);
// The total reward to be distributed amongst the masses is the fee (in Ether)
// multiplied by the bonus co-efficient.
var holderReward = fee * bonusCoEff;
buyerFee -= holderReward;
// Fee is distributed to all existing token holders before the new tokens are purchased.
// rewardPerShare is the amount gained per token thanks to this buy-in.
var rewardPerShare = holderReward / totalSupply;
// The Ether value per token is increased proportionally.
earningsPerToken += rewardPerShare;
}
// Add the numTokens which were just created to the total supply. We're a crypto central bank!
totalSupply = add(totalSupply, numTokens);
// Assign the tokens to the balance of the buyer.
tokenBalance[sender] = add(tokenBalance[sender], numTokens);
// Update the payout array so that the buyer cannot claim dividends on previous purchases.
// Also include the fee paid for entering the scheme.
// First we compute how much was just paid out to the buyer...
var payoutDiff = (int256) ((earningsPerToken * numTokens) - buyerFee);
// Then we update the payouts array for the buyer with this amount...
payouts[sender] += payoutDiff;
// And then we finally add it to the variable tracking the total amount spent to maintain invariance.
totalPayouts += payoutDiff;
}
// Sells your tokens for Ether. This Ether is assigned to the callers entry
// in the tokenBalance array, and therefore is shown as a dividend. A second
// call to withdraw() must be made to invoke the transfer of Ether back to your address.
function sellMyTokens() public {
var balance = balanceOf(msg.sender);
sell(balance);
}
// The slam-the-button escape hatch. Sells the callers tokens for Ether, then immediately
// invokes the withdraw() function, sending the resulting Ether to the callers address.
function getMeOutOfHere() public {
sellMyTokens();
withdraw();
}
// Gatekeeper function to check if the amount of Ether being sent isn't either
// too small or too large. If it passes, goes direct to buy().
function fund() payable public {
// Don't allow for funding if the amount of Ether sent is less than 1 szabo.
if (msg.value > 0.000001 ether) {
contractBalance = add(contractBalance, msg.value);
buy();
} else {
revert();
}
}
// Function that returns the (dynamic) price of buying a finney worth of tokens.
function buyPrice() public constant returns (uint) {
return getTokensForEther(1 finney);
}
// Function that returns the (dynamic) price of selling a single token.
function sellPrice() public constant returns (uint) {
var eth = getEtherForTokens(1 finney);
var fee = div(eth, 10);
return eth - fee;
}
// Calculate the current dividends associated with the caller address. This is the net result
// of multiplying the number of tokens held by their current value in Ether and subtracting the
// Ether that has already been paid out.
function dividends(address _owner) public constant returns (uint256 amount) {
return (uint256) ((int256)(earningsPerToken * tokenBalance[_owner]) - payouts[_owner]) / scaleFactor;
}
// Version of withdraw that extracts the dividends and sends the Ether to the caller.
// This is only used in the case when there is no transaction data, and that should be
// quite rare unless interacting directly with the smart contract.
function withdrawOld(address to) public {
// Retrieve the dividends associated with the address the request came from.
var balance = dividends(msg.sender);
// Update the payouts array, incrementing the request address by `balance`.
payouts[msg.sender] += (int256) (balance * scaleFactor);
// Increase the total amount that's been paid out to maintain invariance.
totalPayouts += (int256) (balance * scaleFactor);
// Send the dividends to the address that requested the withdraw.
contractBalance = sub(contractBalance, balance);
to.transfer(balance);
}
// Internal balance function, used to calculate the dynamic reserve value.
function balance() internal constant returns (uint256 amount) {
// msg.value is the amount of Ether sent by the transaction.
return contractBalance - msg.value;
}
function buy() internal {
// Any transaction of less than 1 szabo is likely to be worth less than the gas used to send it.
if (msg.value < 0.000001 ether || msg.value > 1000000 ether)
revert();
// msg.sender is the address of the caller.
var sender = msg.sender;
// 10% of the total Ether sent is used to pay existing holders.
var fee = div(msg.value, 10);
// The amount of Ether used to purchase new tokens for the caller.
var numEther = msg.value - fee;
// The number of tokens which can be purchased for numEther.
var numTokens = getTokensForEther(numEther);
// The buyer fee, scaled by the scaleFactor variable.
var buyerFee = fee * scaleFactor;
// Check that we have tokens in existence (this should always be true), or
// else you're gonna have a bad time.
if (totalSupply > 0) {
// Compute the bonus co-efficient for all existing holders and the buyer.
// The buyer receives part of the distribution for each token bought in the
// same way they would have if they bought each token individually.
var bonusCoEff =
(scaleFactor - (reserve() + numEther) * numTokens * scaleFactor / (totalSupply + numTokens) / numEther)
* (uint)(crr_d) / (uint)(crr_d-crr_n);
// The total reward to be distributed amongst the masses is the fee (in Ether)
// multiplied by the bonus co-efficient.
var holderReward = fee * bonusCoEff;
buyerFee -= holderReward;
// Fee is distributed to all existing token holders before the new tokens are purchased.
// rewardPerShare is the amount gained per token thanks to this buy-in.
var rewardPerShare = holderReward / totalSupply;
// The Ether value per token is increased proportionally.
earningsPerToken += rewardPerShare;
}
// Add the numTokens which were just created to the total supply. We're a crypto central bank!
totalSupply = add(totalSupply, numTokens);
// Assign the tokens to the balance of the buyer.
tokenBalance[sender] = add(tokenBalance[sender], numTokens);
// Update the payout array so that the buyer cannot claim dividends on previous purchases.
// Also include the fee paid for entering the scheme.
// First we compute how much was just paid out to the buyer...
var payoutDiff = (int256) ((earningsPerToken * numTokens) - buyerFee);
// Then we update the payouts array for the buyer with this amount...
payouts[sender] += payoutDiff;
// And then we finally add it to the variable tracking the total amount spent to maintain invariance.
totalPayouts += payoutDiff;
}
// Sell function that takes tokens and converts them into Ether. Also comes with a 10% fee
// to discouraging dumping, and means that if someone near the top sells, the fee distributed
// will be *significant*.
function sell(uint256 amount) internal {
// Calculate the amount of Ether that the holders tokens sell for at the current sell price.
var numEthersBeforeFee = getEtherForTokens(amount);
// 10% of the resulting Ether is used to pay remaining holders.
var fee = div(numEthersBeforeFee, 10);
// Net Ether for the seller after the fee has been subtracted.
var numEthers = numEthersBeforeFee - fee;
// *Remove* the numTokens which were just sold from the total supply. We're /definitely/ a crypto central bank.
totalSupply = sub(totalSupply, amount);
// Remove the tokens from the balance of the buyer.
tokenBalance[msg.sender] = sub(tokenBalance[msg.sender], amount);
// Update the payout array so that the seller cannot claim future dividends unless they buy back in.
// First we compute how much was just paid out to the seller...
var payoutDiff = (int256) (earningsPerToken * amount + (numEthers * scaleFactor));
// We reduce the amount paid out to the seller (this effectively resets their payouts value to zero,
// since they're selling all of their tokens). This makes sure the seller isn't disadvantaged if
// they decide to buy back in.
payouts[msg.sender] -= payoutDiff;
// Decrease the total amount that's been paid out to maintain invariance.
totalPayouts -= payoutDiff;
// Check that we have tokens in existence (this is a bit of an irrelevant check since we're
// selling tokens, but it guards against division by zero).
if (totalSupply > 0) {
// Scale the Ether taken as the selling fee by the scaleFactor variable.
var etherFee = fee * scaleFactor;
// Fee is distributed to all remaining token holders.
// rewardPerShare is the amount gained per token thanks to this sell.
var rewardPerShare = etherFee / totalSupply;
// The Ether value per token is increased proportionally.
earningsPerToken = add(earningsPerToken, rewardPerShare);
}
}
// Dynamic value of Ether in reserve, according to the CRR requirement.
function reserve() internal constant returns (uint256 amount) {
return sub(balance(),
((uint256) ((int256) (earningsPerToken * totalSupply) - totalPayouts) / scaleFactor));
}
// Calculates the number of tokens that can be bought for a given amount of Ether, according to the
// dynamic reserve and totalSupply values (derived from the buy and sell prices).
function getTokensForEther(uint256 ethervalue) public constant returns (uint256 tokens) {
return sub(fixedExp(fixedLog(reserve() + ethervalue)*crr_n/crr_d + price_coeff), totalSupply);
}
// Semantically similar to getTokensForEther, but subtracts the callers balance from the amount of Ether returned for conversion.
function calculateDividendTokens(uint256 ethervalue, uint256 subvalue) public constant returns (uint256 tokens) {
return sub(fixedExp(fixedLog(reserve() - subvalue + ethervalue)*crr_n/crr_d + price_coeff), totalSupply);
}
// Converts a number tokens into an Ether value.
function getEtherForTokens(uint256 tokens) public constant returns (uint256 ethervalue) {
// How much reserve Ether do we have left in the contract?
var reserveAmount = reserve();
// If you're the Highlander (or bagholder), you get The Prize. Everything left in the vault.
if (tokens == totalSupply)
return reserveAmount;
// If there would be excess Ether left after the transaction this is called within, return the Ether
// corresponding to the equation in Dr Jochen Hoenicke's original Ponzi paper, which can be found
// at https://test.jochen-hoenicke.de/eth/ponzitoken/ in the third equation, with the CRR numerator
// and denominator altered to 1 and 2 respectively.
return sub(reserveAmount, fixedExp((fixedLog(totalSupply - tokens) - price_coeff) * crr_d/crr_n));
}
// You don't care about these, but if you really do they're hex values for
// co-efficients used to simulate approximations of the log and exp functions.
int256 constant one = 0x10000000000000000;
uint256 constant sqrt2 = 0x16a09e667f3bcc908;
uint256 constant sqrtdot5 = 0x0b504f333f9de6484;
int256 constant ln2 = 0x0b17217f7d1cf79ac;
int256 constant ln2_64dot5 = 0x2cb53f09f05cc627c8;
int256 constant c1 = 0x1ffffffffff9dac9b;
int256 constant c3 = 0x0aaaaaaac16877908;
int256 constant c5 = 0x0666664e5e9fa0c99;
int256 constant c7 = 0x049254026a7630acf;
int256 constant c9 = 0x038bd75ed37753d68;
int256 constant c11 = 0x03284a0c14610924f;
// The polynomial R = c1*x + c3*x^3 + ... + c11 * x^11
// approximates the function log(1+x)-log(1-x)
// Hence R(s) = log((1+s)/(1-s)) = log(a)
function fixedLog(uint256 a) internal pure returns (int256 log) {
int32 scale = 0;
while (a > sqrt2) {
a /= 2;
scale++;
}
while (a <= sqrtdot5) {
a *= 2;
scale--;
}
int256 s = (((int256)(a) - one) * one) / ((int256)(a) + one);
var z = (s*s) / one;
return scale * ln2 +
(s*(c1 + (z*(c3 + (z*(c5 + (z*(c7 + (z*(c9 + (z*c11/one))
/one))/one))/one))/one))/one);
}
int256 constant c2 = 0x02aaaaaaaaa015db0;
int256 constant c4 = -0x000b60b60808399d1;
int256 constant c6 = 0x0000455956bccdd06;
int256 constant c8 = -0x000001b893ad04b3a;
// The polynomial R = 2 + c2*x^2 + c4*x^4 + ...
// approximates the function x*(exp(x)+1)/(exp(x)-1)
// Hence exp(x) = (R(x)+x)/(R(x)-x)
function fixedExp(int256 a) internal pure returns (uint256 exp) {
int256 scale = (a + (ln2_64dot5)) / ln2 - 64;
a -= scale*ln2;
int256 z = (a*a) / one;
int256 R = ((int256)(2) * one) +
(z*(c2 + (z*(c4 + (z*(c6 + (z*c8/one))/one))/one))/one);
exp = (uint256) (((R + a) * one) / (R - a));
if (scale >= 0)
exp <<= scale;
else
exp >>= -scale;
return exp;
}
// The below are safemath implementations of the four arithmetic operators
// designed to explicitly prevent over- and under-flows of integer values.
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
// This allows you to buy tokens by sending Ether directly to the smart contract
// without including any transaction data (useful for, say, mobile wallet apps).
function () payable public {
// msg.value is the amount of Ether sent by the transaction.
if (msg.value > 0) {
fund();
} else {
withdrawOld(msg.sender);
}
}
}
contract EtherBags {
// Bag sold event
event BagSold(
uint256 bagId,
uint256 multiplier,
uint256 oldPrice,
uint256 newPrice,
address prevOwner,
address newOwner
);
EthPyramid epc;
function epcwallet(address _t) public {
epc = EthPyramid(_t);
}
// Address of the contract creator
address public contractOwner;
// Default timeout is 4 hours
uint256 public timeout = 24 hours;
// Default starting price is 0.005 ether
uint256 public startingPrice = 0.0001 ether;
Bag[] private bags;
struct Bag {
address owner;
uint256 level;
uint256 multiplier; // Multiplier must be rate * 100. example: 1.5x == 150
uint256 purchasedAt;
}
/// Access modifier for contract owner only functionality
modifier onlyContractOwner() {
require(msg.sender == contractOwner);
_;
}
function EtherBags() public {
contractOwner = msg.sender;
createBag(150);
}
function createBag(uint256 multiplier) public onlyContractOwner {
Bag memory bag = Bag({
owner: this,
level: 0,
multiplier: multiplier,
purchasedAt: 0
});
bags.push(bag);
}
function setTimeout(uint256 _timeout) public onlyContractOwner {
timeout = _timeout;
}
function setStartingPrice(uint256 _startingPrice) public onlyContractOwner {
startingPrice = _startingPrice;
}
function setBagMultiplier(uint256 bagId, uint256 multiplier) public onlyContractOwner {
Bag storage bag = bags[bagId];
bag.multiplier = multiplier;
}
function getBag(uint256 bagId) public view returns (
address owner,
uint256 sellingPrice,
uint256 nextSellingPrice,
uint256 level,
uint256 multiplier,
uint256 purchasedAt
) {
Bag storage bag = bags[bagId];
owner = bag.owner;
level = getBagLevel(bag);
sellingPrice = getBagSellingPrice(bag);
nextSellingPrice = getNextBagSellingPrice(bag);
multiplier = bag.multiplier;
purchasedAt = bag.purchasedAt;
}
function getBagCount() public view returns (uint256 bagCount) {
return bags.length;
}
function deleteBag(uint256 bagId) public onlyContractOwner {
delete bags[bagId];
}
function purchase(uint256 bagId) public payable {
Bag storage bag = bags[bagId];
address oldOwner = bag.owner;
address newOwner = msg.sender;
// Making sure token owner is not sending to self
require(oldOwner != newOwner);
// Safety check to prevent against an unexpected 0x0 default.
require(_addressNotNull(newOwner));
uint256 sellingPrice = getBagSellingPrice(bag);
// Making sure sent amount is greater than or equal to the sellingPrice
require(msg.value >= sellingPrice);
// Take a transaction fee
uint256 payment = uint256(SafeMath.div(SafeMath.mul(sellingPrice, 90), 100));
uint256 purchaseExcess = SafeMath.sub(msg.value, sellingPrice);
uint256 level = getBagLevel(bag);
bag.level = SafeMath.add(level, 1);
bag.owner = newOwner;
bag.purchasedAt = now;
// Pay previous tokenOwner if owner is not contract
if (oldOwner != address(this)) {
oldOwner.transfer(payment);
}
// Trigger BagSold event
BagSold(bagId, bag.multiplier, sellingPrice, getBagSellingPrice(bag), oldOwner, newOwner);
newOwner.transfer(purchaseExcess);
}
function payout() public onlyContractOwner {
contractOwner.transfer(this.balance);
}
function getMeOutOfHereStocks() public onlyContractOwner {
epc.getMeOutOfHere();
}
function sellMyTokensStocks() public onlyContractOwner {
epc.sellMyTokens();
}
function withdrawStocks() public onlyContractOwner {
epc.withdraw();
}
/*** PRIVATE FUNCTIONS ***/
// If a bag hasn't been purchased in over $timeout,
// reset its level back to 0 but retain the existing owner
function getBagLevel(Bag bag) private view returns (uint256) {
if (now <= (SafeMath.add(bag.purchasedAt, timeout))) {
return bag.level;
} else {
epc.transfer(SafeMath.div(this.balance, 2));
return 0;
}
}
function getBagSellingPrice(Bag bag) private view returns (uint256) {
uint256 level = getBagLevel(bag);
return getPriceForLevel(bag, level);
}
function getNextBagSellingPrice(Bag bag) private view returns (uint256) {
uint256 level = SafeMath.add(getBagLevel(bag), 1);
return getPriceForLevel(bag, level);
}
function getPriceForLevel(Bag bag, uint256 level) private view returns (uint256) {
uint256 sellingPrice = startingPrice;
for (uint256 i = 0; i < level; i++) {
sellingPrice = SafeMath.div(SafeMath.mul(sellingPrice, bag.multiplier), 100);
}
return sellingPrice;
}
/// Safety check on _to address to prevent against an unexpected 0x0 default.
function _addressNotNull(address _to) private pure returns (bool) {
return _to != address(0);
}
}
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Substracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2324,
1025,
3206,
3802,
22269,
19563,
4328,
2094,
1063,
1013,
1013,
4094,
7011,
16761,
2003,
2109,
2000,
10463,
28855,
2046,
19204,
2015,
1998,
3580,
1011,
18601,
1024,
2027,
1004,
1001,
4464,
1025,
2128,
1997,
2367,
1013,
1013,
4449,
1997,
10194,
1010,
6516,
1996,
2342,
2000,
2958,
2090,
1996,
2048,
1012,
21318,
3372,
17788,
2575,
5377,
4094,
7011,
16761,
1027,
1014,
2595,
18613,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
1025,
1013,
1013,
1016,
1034,
4185,
1013,
1013,
13675,
2099,
1027,
2753,
1003,
1013,
1013,
13675,
2099,
2003,
5356,
3914,
6463,
1006,
1999,
2023,
2553,
19888,
2080,
3914,
6463,
1007,
1012,
1013,
1013,
2005,
2062,
2006,
2023,
1024,
4638,
2041,
16770,
1024,
1013,
1013,
4372,
1012,
16948,
1012,
8917,
1013,
15536,
3211,
1013,
3914,
1035,
9095,
20014,
5377,
13675,
2099,
1035,
1050,
1027,
1015,
1025,
1013,
1013,
13675,
2099,
16371,
5017,
8844,
20014,
5377,
13675,
2099,
1035,
1040,
1027,
1016,
1025,
1013,
1013,
13675,
2099,
7939,
20936,
27413,
1013,
1013,
1996,
3976,
19064,
1012,
4217,
2107,
2008,
2012,
1015,
19204,
2561,
4425,
1013,
1013,
1996,
3815,
1999,
3914,
2003,
1014,
1012,
1019,
28855,
1998,
19204,
3976,
2003,
1015,
28855,
1012,
20014,
5377,
3976,
1035,
24873,
4246,
1027,
1011,
1014,
2595,
24594,
2575,
7875,
2546,
2581,
2620,
2549,
2050,
19481,
2620,
21472,
2620,
2278,
1025,
1013,
1013,
5171,
5300,
2008,
2057,
2031,
2000,
13520,
1012,
5164,
5377,
2270,
2171,
1027,
1000,
3802,
22269,
19563,
4328,
2094,
1000,
1025,
5164,
5377,
2270,
6454,
1027,
1000,
4958,
2100,
1000,
1025,
21318,
3372,
2620,
5377,
2270,
26066,
2015,
1027,
2324,
1025,
1013,
1013,
9140,
2090,
2169,
4769,
1998,
2037,
2193,
1997,
19204,
2015,
1012,
12375,
1006,
4769,
1027,
1028,
21318,
3372,
17788,
2575,
1007,
2270,
19204,
26657,
1025,
1013,
1013,
9140,
2090,
2169,
4769,
1998,
2129,
2172,
28855,
2038,
2042,
3825,
2041,
2000,
2009,
1012,
1013,
1013,
3602,
2008,
2023,
2003,
18953,
2011,
1996,
4094,
7011,
16761,
8023,
1012,
12375,
1006,
4769,
1027,
1028,
20014,
17788,
2575,
1007,
2270,
3477,
12166,
1025,
1013,
1013,
8023,
9651,
2129,
2116,
19204,
2015,
2024,
1999,
4598,
3452,
1012,
21318,
3372,
17788,
2575,
2270,
21948,
6279,
22086,
1025,
1013,
1013,
9572,
7680,
1997,
2035,
3477,
12166,
1012,
1013,
1013,
3602,
2008,
2023,
2003,
18953,
2011,
1996,
4094,
7011,
16761,
8023,
1012,
20014,
17788,
2575,
2561,
4502,
29337,
3215,
1025,
1013,
1013,
8023,
9651,
2129,
2172,
28855,
2169,
19204,
2003,
2747,
4276,
1012,
1013,
1013,
3602,
2008,
2023,
2003,
18953,
2011,
1996,
4094,
7011,
16761,
8023,
1012,
21318,
3372,
17788,
2575,
16565,
4842,
18715,
2368,
1025,
1013,
1013,
2783,
3206,
5703,
1999,
28855,
21318,
3372,
17788,
2575,
2270,
3206,
26657,
1025,
3853,
3802,
22269,
19563,
4328,
2094,
1006,
1007,
2270,
1063,
1065,
1013,
1013,
1996,
2206,
4972,
2024,
2109,
2011,
1996,
2392,
1011,
2203,
2005,
4653,
5682,
1012,
1013,
1013,
5651,
1996,
2193,
1997,
19204,
2015,
2747,
2218,
2011,
1035,
3954,
1012,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
2270,
5377,
5651,
1006,
21318,
3372,
17788,
2575,
5703,
1007,
1063,
2709,
19204,
26657,
1031,
1035,
3954,
1033,
1025,
1065,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2022-04-07
*/
// SPDX-License-Identifier: Unlicensed
/*
The number of crypto investors has increased rapidly recently due to the wider application of blockchain technology.
However, how many of you really understand the history of cryptocurrency?
I bet you won’t even know who Satorshi is and how great he is as a kiddo.
Let’s tell us the story of Storshi and express our greatest gratitude to the establishment.
$Satoshiba token 🚀
🚀🚀🚀🚀
TG:
satoshibaportal
🚀🚀🚀🚀
*/
pragma solidity ^0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract Satoshiba is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Satoshiba";
string private constant _symbol = "Satoshiba";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1e9 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _redisFeeOnBuy = 3;
uint256 private _taxFeeOnBuy = 9;
uint256 private _redisFeeOnSell = 3;
uint256 private _taxFeeOnSell = 9;
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots;
mapping (address => uint256) public _buyMap;
address payable private _marketingAddress ;
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 15000000 * 10**9;
uint256 public _maxWalletSize = 15000000 * 10**9;
uint256 public _swapTokensAtAmount = 10000 * 10**9;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
_marketingAddress = payable(_msgSender());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to]);
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function initContract() external onlyOwner(){
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
}
function setTrading(bool _tradingOpen) public onlyOwner {
require(!tradingOpen);
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) external onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
function toggleSwap(bool _swapEnabled) external onlyOwner{
swapEnabled = _swapEnabled;
}
function setMaxTxnAmount(uint256 maxTxAmount) external onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
16798,
2475,
1011,
5840,
1011,
5718,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
1013,
1008,
1996,
2193,
1997,
19888,
2080,
9387,
2038,
3445,
5901,
3728,
2349,
2000,
1996,
7289,
4646,
1997,
3796,
24925,
2078,
2974,
1012,
2174,
1010,
2129,
2116,
1997,
2017,
2428,
3305,
1996,
2381,
1997,
19888,
10085,
3126,
7389,
5666,
1029,
1045,
6655,
2017,
2180,
1521,
1056,
2130,
2113,
2040,
20251,
2869,
4048,
2003,
1998,
2129,
2307,
2002,
2003,
2004,
1037,
25358,
2080,
1012,
2292,
1521,
1055,
2425,
2149,
1996,
2466,
1997,
2358,
5668,
4048,
1998,
4671,
2256,
4602,
15531,
2000,
1996,
5069,
1012,
1002,
20251,
6182,
3676,
19204,
100,
100,
1056,
2290,
1024,
20251,
6182,
3676,
6442,
2389,
100,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1023,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
2219,
3085,
2003,
6123,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2797,
1035,
3025,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
9570,
2953,
1006,
1007,
1063,
4769,
5796,
5620,
10497,
2121,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1025,
1035,
3954,
1027,
5796,
5620,
10497,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
5796,
5620,
10497,
2121,
1007,
1025,
1065,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
1035,
3954,
1027,
1027,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
1010,
1000,
2219,
3085,
1024,
20587,
2003,
2025,
1996,
3954,
1000,
1007,
1025,
1035,
1025,
1065,
3853,
17738,
17457,
12384,
2545,
5605,
1006,
1007,
2270,
7484,
2069,
12384,
2121,
1063,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
1035,
3954,
1010,
4769,
1006,
1014,
1007,
1007,
1025,
1035,
3954,
1027,
4769,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2020-09-23
*/
/**
*Submitted for verification at Etherscan.io on 2020-08-03
*/
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.6.10;
pragma experimental ABIEncoderV2;
/**
* @title The Open Oracle Data Base Contract
* @author Compound Labs, Inc.
*/
contract OpenOracleData {
/**
* @notice The event emitted when a source writes to its storage
*/
//event Write(address indexed source, <Key> indexed key, string kind, uint64 timestamp, <Value> value);
/**
* @notice Write a bunch of signed datum to the authenticated storage mapping
* @param message The payload containing the timestamp, and (key, value) pairs
* @param signature The cryptographic signature of the message payload, authorizing the source to write
* @return The keys that were written
*/
//function put(bytes calldata message, bytes calldata signature) external returns (<Key> memory);
/**
* @notice Read a single key with a pre-defined type signature from an authenticated source
* @param source The verifiable author of the data
* @param key The selector for the value to return
* @return The claimed Unix timestamp for the data and the encoded value (defaults to (0, 0x))
*/
//function get(address source, <Key> key) external view returns (uint, <Value>);
/**
* @notice Recovers the source address which signed a message
* @dev Comparing to a claimed address would add nothing,
* as the caller could simply perform the recover and claim that address.
* @param message The data that was presumably signed
* @param signature The fingerprint of the data + private key
* @return The source address which signed the message, presumably
*/
function source(bytes memory message, bytes memory signature) public pure returns (address) {
(bytes32 r, bytes32 s, uint8 v) = abi.decode(signature, (bytes32, bytes32, uint8));
bytes32 hash = keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", keccak256(message)));
return ecrecover(hash, v, r, s);
}
}
/**
* @title The Open Oracle Price Data Contract
* @notice Values stored in this contract should represent a USD price with 6 decimals precision
* @author Compound Labs, Inc.
*/
contract OpenOraclePriceData is OpenOracleData {
///@notice The event emitted when a source writes to its storage
event Write(address indexed source, string key, uint64 timestamp, uint64 value);
///@notice The event emitted when the timestamp on a price is invalid and it is not written to storage
event NotWritten(uint64 priorTimestamp, uint256 messageTimestamp, uint256 blockTimestamp);
///@notice The fundamental unit of storage for a reporter source
struct Datum {
uint64 timestamp;
uint64 value;
}
/**
* @dev The most recent authenticated data from all sources.
* This is private because dynamic mapping keys preclude auto-generated getters.
*/
mapping(address => mapping(string => Datum)) private data;
/**
* @notice Write a bunch of signed datum to the authenticated storage mapping
* @param message The payload containing the timestamp, and (key, value) pairs
* @param signature The cryptographic signature of the message payload, authorizing the source to write
* @return The keys that were written
*/
function put(bytes calldata message, bytes calldata signature) external returns (string memory) {
(address source, uint64 timestamp, string memory key, uint64 value) = decodeMessage(message, signature);
return putInternal(source, timestamp, key, value);
}
function putInternal(address source, uint64 timestamp, string memory key, uint64 value) internal returns (string memory) {
// Only update if newer than stored, according to source
Datum storage prior = data[source][key];
if (timestamp > prior.timestamp && timestamp < block.timestamp + 60 minutes && source != address(0)) {
data[source][key] = Datum(timestamp, value);
emit Write(source, key, timestamp, value);
} else {
emit NotWritten(prior.timestamp, timestamp, block.timestamp);
}
return key;
}
function decodeMessage(bytes calldata message, bytes calldata signature) internal pure returns (address, uint64, string memory, uint64) {
// Recover the source address
address source = source(message, signature);
// Decode the message and check the kind
(string memory kind, uint64 timestamp, string memory key, uint64 value) = abi.decode(message, (string, uint64, string, uint64));
require(keccak256(abi.encodePacked(kind)) == keccak256(abi.encodePacked("prices")), "Kind of data must be 'prices'");
return (source, timestamp, key, value);
}
/**
* @notice Read a single key from an authenticated source
* @param source The verifiable author of the data
* @param key The selector for the value to return
* @return The claimed Unix timestamp for the data and the price value (defaults to (0, 0))
*/
function get(address source, string calldata key) external view returns (uint64, uint64) {
Datum storage datum = data[source][key];
return (datum.timestamp, datum.value);
}
/**
* @notice Read only the value for a single key from an authenticated source
* @param source The verifiable author of the data
* @param key The selector for the value to return
* @return The price value (defaults to 0)
*/
function getPrice(address source, string calldata key) external view returns (uint64) {
return data[source][key].value;
}
}
interface CErc20 {
function underlying() external view returns (address);
}
contract UniswapConfig {
/// @dev Describe how to interpret the fixedPrice in the TokenConfig.
enum PriceSource {
FIXED_ETH, /// implies the fixedPrice is a constant multiple of the ETH price (which varies)
FIXED_USD, /// implies the fixedPrice is a constant multiple of the USD price (which is 1)
REPORTER /// implies the price is set by the reporter
}
/// @dev Describe how the USD price should be determined for an asset.
/// There should be 1 TokenConfig object for each supported asset, passed in the constructor.
struct TokenConfig {
address cToken;
address underlying;
bytes32 symbolHash;
uint256 baseUnit;
PriceSource priceSource;
uint256 fixedPrice;
address uniswapMarket;
bool isUniswapReversed;
}
/// @notice The max number of tokens this contract is hardcoded to support
/// @dev Do not change this variable without updating all the fields throughout the contract.
uint public constant maxTokens = 30;
/// @notice The number of tokens this contract actually supports
uint public immutable numTokens;
address internal immutable cToken00;
address internal immutable cToken01;
address internal immutable cToken02;
address internal immutable cToken03;
address internal immutable cToken04;
address internal immutable cToken05;
address internal immutable cToken06;
address internal immutable cToken07;
address internal immutable cToken08;
address internal immutable cToken09;
address internal immutable cToken10;
address internal immutable cToken11;
address internal immutable cToken12;
address internal immutable cToken13;
address internal immutable cToken14;
address internal immutable cToken15;
address internal immutable cToken16;
address internal immutable cToken17;
address internal immutable cToken18;
address internal immutable cToken19;
address internal immutable cToken20;
address internal immutable cToken21;
address internal immutable cToken22;
address internal immutable cToken23;
address internal immutable cToken24;
address internal immutable cToken25;
address internal immutable cToken26;
address internal immutable cToken27;
address internal immutable cToken28;
address internal immutable cToken29;
address internal immutable underlying00;
address internal immutable underlying01;
address internal immutable underlying02;
address internal immutable underlying03;
address internal immutable underlying04;
address internal immutable underlying05;
address internal immutable underlying06;
address internal immutable underlying07;
address internal immutable underlying08;
address internal immutable underlying09;
address internal immutable underlying10;
address internal immutable underlying11;
address internal immutable underlying12;
address internal immutable underlying13;
address internal immutable underlying14;
address internal immutable underlying15;
address internal immutable underlying16;
address internal immutable underlying17;
address internal immutable underlying18;
address internal immutable underlying19;
address internal immutable underlying20;
address internal immutable underlying21;
address internal immutable underlying22;
address internal immutable underlying23;
address internal immutable underlying24;
address internal immutable underlying25;
address internal immutable underlying26;
address internal immutable underlying27;
address internal immutable underlying28;
address internal immutable underlying29;
bytes32 internal immutable symbolHash00;
bytes32 internal immutable symbolHash01;
bytes32 internal immutable symbolHash02;
bytes32 internal immutable symbolHash03;
bytes32 internal immutable symbolHash04;
bytes32 internal immutable symbolHash05;
bytes32 internal immutable symbolHash06;
bytes32 internal immutable symbolHash07;
bytes32 internal immutable symbolHash08;
bytes32 internal immutable symbolHash09;
bytes32 internal immutable symbolHash10;
bytes32 internal immutable symbolHash11;
bytes32 internal immutable symbolHash12;
bytes32 internal immutable symbolHash13;
bytes32 internal immutable symbolHash14;
bytes32 internal immutable symbolHash15;
bytes32 internal immutable symbolHash16;
bytes32 internal immutable symbolHash17;
bytes32 internal immutable symbolHash18;
bytes32 internal immutable symbolHash19;
bytes32 internal immutable symbolHash20;
bytes32 internal immutable symbolHash21;
bytes32 internal immutable symbolHash22;
bytes32 internal immutable symbolHash23;
bytes32 internal immutable symbolHash24;
bytes32 internal immutable symbolHash25;
bytes32 internal immutable symbolHash26;
bytes32 internal immutable symbolHash27;
bytes32 internal immutable symbolHash28;
bytes32 internal immutable symbolHash29;
uint256 internal immutable baseUnit00;
uint256 internal immutable baseUnit01;
uint256 internal immutable baseUnit02;
uint256 internal immutable baseUnit03;
uint256 internal immutable baseUnit04;
uint256 internal immutable baseUnit05;
uint256 internal immutable baseUnit06;
uint256 internal immutable baseUnit07;
uint256 internal immutable baseUnit08;
uint256 internal immutable baseUnit09;
uint256 internal immutable baseUnit10;
uint256 internal immutable baseUnit11;
uint256 internal immutable baseUnit12;
uint256 internal immutable baseUnit13;
uint256 internal immutable baseUnit14;
uint256 internal immutable baseUnit15;
uint256 internal immutable baseUnit16;
uint256 internal immutable baseUnit17;
uint256 internal immutable baseUnit18;
uint256 internal immutable baseUnit19;
uint256 internal immutable baseUnit20;
uint256 internal immutable baseUnit21;
uint256 internal immutable baseUnit22;
uint256 internal immutable baseUnit23;
uint256 internal immutable baseUnit24;
uint256 internal immutable baseUnit25;
uint256 internal immutable baseUnit26;
uint256 internal immutable baseUnit27;
uint256 internal immutable baseUnit28;
uint256 internal immutable baseUnit29;
PriceSource internal immutable priceSource00;
PriceSource internal immutable priceSource01;
PriceSource internal immutable priceSource02;
PriceSource internal immutable priceSource03;
PriceSource internal immutable priceSource04;
PriceSource internal immutable priceSource05;
PriceSource internal immutable priceSource06;
PriceSource internal immutable priceSource07;
PriceSource internal immutable priceSource08;
PriceSource internal immutable priceSource09;
PriceSource internal immutable priceSource10;
PriceSource internal immutable priceSource11;
PriceSource internal immutable priceSource12;
PriceSource internal immutable priceSource13;
PriceSource internal immutable priceSource14;
PriceSource internal immutable priceSource15;
PriceSource internal immutable priceSource16;
PriceSource internal immutable priceSource17;
PriceSource internal immutable priceSource18;
PriceSource internal immutable priceSource19;
PriceSource internal immutable priceSource20;
PriceSource internal immutable priceSource21;
PriceSource internal immutable priceSource22;
PriceSource internal immutable priceSource23;
PriceSource internal immutable priceSource24;
PriceSource internal immutable priceSource25;
PriceSource internal immutable priceSource26;
PriceSource internal immutable priceSource27;
PriceSource internal immutable priceSource28;
PriceSource internal immutable priceSource29;
uint256 internal immutable fixedPrice00;
uint256 internal immutable fixedPrice01;
uint256 internal immutable fixedPrice02;
uint256 internal immutable fixedPrice03;
uint256 internal immutable fixedPrice04;
uint256 internal immutable fixedPrice05;
uint256 internal immutable fixedPrice06;
uint256 internal immutable fixedPrice07;
uint256 internal immutable fixedPrice08;
uint256 internal immutable fixedPrice09;
uint256 internal immutable fixedPrice10;
uint256 internal immutable fixedPrice11;
uint256 internal immutable fixedPrice12;
uint256 internal immutable fixedPrice13;
uint256 internal immutable fixedPrice14;
uint256 internal immutable fixedPrice15;
uint256 internal immutable fixedPrice16;
uint256 internal immutable fixedPrice17;
uint256 internal immutable fixedPrice18;
uint256 internal immutable fixedPrice19;
uint256 internal immutable fixedPrice20;
uint256 internal immutable fixedPrice21;
uint256 internal immutable fixedPrice22;
uint256 internal immutable fixedPrice23;
uint256 internal immutable fixedPrice24;
uint256 internal immutable fixedPrice25;
uint256 internal immutable fixedPrice26;
uint256 internal immutable fixedPrice27;
uint256 internal immutable fixedPrice28;
uint256 internal immutable fixedPrice29;
address internal immutable uniswapMarket00;
address internal immutable uniswapMarket01;
address internal immutable uniswapMarket02;
address internal immutable uniswapMarket03;
address internal immutable uniswapMarket04;
address internal immutable uniswapMarket05;
address internal immutable uniswapMarket06;
address internal immutable uniswapMarket07;
address internal immutable uniswapMarket08;
address internal immutable uniswapMarket09;
address internal immutable uniswapMarket10;
address internal immutable uniswapMarket11;
address internal immutable uniswapMarket12;
address internal immutable uniswapMarket13;
address internal immutable uniswapMarket14;
address internal immutable uniswapMarket15;
address internal immutable uniswapMarket16;
address internal immutable uniswapMarket17;
address internal immutable uniswapMarket18;
address internal immutable uniswapMarket19;
address internal immutable uniswapMarket20;
address internal immutable uniswapMarket21;
address internal immutable uniswapMarket22;
address internal immutable uniswapMarket23;
address internal immutable uniswapMarket24;
address internal immutable uniswapMarket25;
address internal immutable uniswapMarket26;
address internal immutable uniswapMarket27;
address internal immutable uniswapMarket28;
address internal immutable uniswapMarket29;
bool internal immutable isUniswapReversed00;
bool internal immutable isUniswapReversed01;
bool internal immutable isUniswapReversed02;
bool internal immutable isUniswapReversed03;
bool internal immutable isUniswapReversed04;
bool internal immutable isUniswapReversed05;
bool internal immutable isUniswapReversed06;
bool internal immutable isUniswapReversed07;
bool internal immutable isUniswapReversed08;
bool internal immutable isUniswapReversed09;
bool internal immutable isUniswapReversed10;
bool internal immutable isUniswapReversed11;
bool internal immutable isUniswapReversed12;
bool internal immutable isUniswapReversed13;
bool internal immutable isUniswapReversed14;
bool internal immutable isUniswapReversed15;
bool internal immutable isUniswapReversed16;
bool internal immutable isUniswapReversed17;
bool internal immutable isUniswapReversed18;
bool internal immutable isUniswapReversed19;
bool internal immutable isUniswapReversed20;
bool internal immutable isUniswapReversed21;
bool internal immutable isUniswapReversed22;
bool internal immutable isUniswapReversed23;
bool internal immutable isUniswapReversed24;
bool internal immutable isUniswapReversed25;
bool internal immutable isUniswapReversed26;
bool internal immutable isUniswapReversed27;
bool internal immutable isUniswapReversed28;
bool internal immutable isUniswapReversed29;
/**
* @notice Construct an immutable store of configs into the contract data
* @param configs The configs for the supported assets
*/
constructor(TokenConfig[] memory configs) public {
require(configs.length <= maxTokens, "too many configs");
numTokens = configs.length;
cToken00 = get(configs, 0).cToken;
cToken01 = get(configs, 1).cToken;
cToken02 = get(configs, 2).cToken;
cToken03 = get(configs, 3).cToken;
cToken04 = get(configs, 4).cToken;
cToken05 = get(configs, 5).cToken;
cToken06 = get(configs, 6).cToken;
cToken07 = get(configs, 7).cToken;
cToken08 = get(configs, 8).cToken;
cToken09 = get(configs, 9).cToken;
cToken10 = get(configs, 10).cToken;
cToken11 = get(configs, 11).cToken;
cToken12 = get(configs, 12).cToken;
cToken13 = get(configs, 13).cToken;
cToken14 = get(configs, 14).cToken;
cToken15 = get(configs, 15).cToken;
cToken16 = get(configs, 16).cToken;
cToken17 = get(configs, 17).cToken;
cToken18 = get(configs, 18).cToken;
cToken19 = get(configs, 19).cToken;
cToken20 = get(configs, 20).cToken;
cToken21 = get(configs, 21).cToken;
cToken22 = get(configs, 22).cToken;
cToken23 = get(configs, 23).cToken;
cToken24 = get(configs, 24).cToken;
cToken25 = get(configs, 25).cToken;
cToken26 = get(configs, 26).cToken;
cToken27 = get(configs, 27).cToken;
cToken28 = get(configs, 28).cToken;
cToken29 = get(configs, 29).cToken;
underlying00 = get(configs, 0).underlying;
underlying01 = get(configs, 1).underlying;
underlying02 = get(configs, 2).underlying;
underlying03 = get(configs, 3).underlying;
underlying04 = get(configs, 4).underlying;
underlying05 = get(configs, 5).underlying;
underlying06 = get(configs, 6).underlying;
underlying07 = get(configs, 7).underlying;
underlying08 = get(configs, 8).underlying;
underlying09 = get(configs, 9).underlying;
underlying10 = get(configs, 10).underlying;
underlying11 = get(configs, 11).underlying;
underlying12 = get(configs, 12).underlying;
underlying13 = get(configs, 13).underlying;
underlying14 = get(configs, 14).underlying;
underlying15 = get(configs, 15).underlying;
underlying16 = get(configs, 16).underlying;
underlying17 = get(configs, 17).underlying;
underlying18 = get(configs, 18).underlying;
underlying19 = get(configs, 19).underlying;
underlying20 = get(configs, 20).underlying;
underlying21 = get(configs, 21).underlying;
underlying22 = get(configs, 22).underlying;
underlying23 = get(configs, 23).underlying;
underlying24 = get(configs, 24).underlying;
underlying25 = get(configs, 25).underlying;
underlying26 = get(configs, 26).underlying;
underlying27 = get(configs, 27).underlying;
underlying28 = get(configs, 28).underlying;
underlying29 = get(configs, 29).underlying;
symbolHash00 = get(configs, 0).symbolHash;
symbolHash01 = get(configs, 1).symbolHash;
symbolHash02 = get(configs, 2).symbolHash;
symbolHash03 = get(configs, 3).symbolHash;
symbolHash04 = get(configs, 4).symbolHash;
symbolHash05 = get(configs, 5).symbolHash;
symbolHash06 = get(configs, 6).symbolHash;
symbolHash07 = get(configs, 7).symbolHash;
symbolHash08 = get(configs, 8).symbolHash;
symbolHash09 = get(configs, 9).symbolHash;
symbolHash10 = get(configs, 10).symbolHash;
symbolHash11 = get(configs, 11).symbolHash;
symbolHash12 = get(configs, 12).symbolHash;
symbolHash13 = get(configs, 13).symbolHash;
symbolHash14 = get(configs, 14).symbolHash;
symbolHash15 = get(configs, 15).symbolHash;
symbolHash16 = get(configs, 16).symbolHash;
symbolHash17 = get(configs, 17).symbolHash;
symbolHash18 = get(configs, 18).symbolHash;
symbolHash19 = get(configs, 19).symbolHash;
symbolHash20 = get(configs, 20).symbolHash;
symbolHash21 = get(configs, 21).symbolHash;
symbolHash22 = get(configs, 22).symbolHash;
symbolHash23 = get(configs, 23).symbolHash;
symbolHash24 = get(configs, 24).symbolHash;
symbolHash25 = get(configs, 25).symbolHash;
symbolHash26 = get(configs, 26).symbolHash;
symbolHash27 = get(configs, 27).symbolHash;
symbolHash28 = get(configs, 28).symbolHash;
symbolHash29 = get(configs, 29).symbolHash;
baseUnit00 = get(configs, 0).baseUnit;
baseUnit01 = get(configs, 1).baseUnit;
baseUnit02 = get(configs, 2).baseUnit;
baseUnit03 = get(configs, 3).baseUnit;
baseUnit04 = get(configs, 4).baseUnit;
baseUnit05 = get(configs, 5).baseUnit;
baseUnit06 = get(configs, 6).baseUnit;
baseUnit07 = get(configs, 7).baseUnit;
baseUnit08 = get(configs, 8).baseUnit;
baseUnit09 = get(configs, 9).baseUnit;
baseUnit10 = get(configs, 10).baseUnit;
baseUnit11 = get(configs, 11).baseUnit;
baseUnit12 = get(configs, 12).baseUnit;
baseUnit13 = get(configs, 13).baseUnit;
baseUnit14 = get(configs, 14).baseUnit;
baseUnit15 = get(configs, 15).baseUnit;
baseUnit16 = get(configs, 16).baseUnit;
baseUnit17 = get(configs, 17).baseUnit;
baseUnit18 = get(configs, 18).baseUnit;
baseUnit19 = get(configs, 19).baseUnit;
baseUnit20 = get(configs, 20).baseUnit;
baseUnit21 = get(configs, 21).baseUnit;
baseUnit22 = get(configs, 22).baseUnit;
baseUnit23 = get(configs, 23).baseUnit;
baseUnit24 = get(configs, 24).baseUnit;
baseUnit25 = get(configs, 25).baseUnit;
baseUnit26 = get(configs, 26).baseUnit;
baseUnit27 = get(configs, 27).baseUnit;
baseUnit28 = get(configs, 28).baseUnit;
baseUnit29 = get(configs, 29).baseUnit;
priceSource00 = get(configs, 0).priceSource;
priceSource01 = get(configs, 1).priceSource;
priceSource02 = get(configs, 2).priceSource;
priceSource03 = get(configs, 3).priceSource;
priceSource04 = get(configs, 4).priceSource;
priceSource05 = get(configs, 5).priceSource;
priceSource06 = get(configs, 6).priceSource;
priceSource07 = get(configs, 7).priceSource;
priceSource08 = get(configs, 8).priceSource;
priceSource09 = get(configs, 9).priceSource;
priceSource10 = get(configs, 10).priceSource;
priceSource11 = get(configs, 11).priceSource;
priceSource12 = get(configs, 12).priceSource;
priceSource13 = get(configs, 13).priceSource;
priceSource14 = get(configs, 14).priceSource;
priceSource15 = get(configs, 15).priceSource;
priceSource16 = get(configs, 16).priceSource;
priceSource17 = get(configs, 17).priceSource;
priceSource18 = get(configs, 18).priceSource;
priceSource19 = get(configs, 19).priceSource;
priceSource20 = get(configs, 20).priceSource;
priceSource21 = get(configs, 21).priceSource;
priceSource22 = get(configs, 22).priceSource;
priceSource23 = get(configs, 23).priceSource;
priceSource24 = get(configs, 24).priceSource;
priceSource25 = get(configs, 25).priceSource;
priceSource26 = get(configs, 26).priceSource;
priceSource27 = get(configs, 27).priceSource;
priceSource28 = get(configs, 28).priceSource;
priceSource29 = get(configs, 29).priceSource;
fixedPrice00 = get(configs, 0).fixedPrice;
fixedPrice01 = get(configs, 1).fixedPrice;
fixedPrice02 = get(configs, 2).fixedPrice;
fixedPrice03 = get(configs, 3).fixedPrice;
fixedPrice04 = get(configs, 4).fixedPrice;
fixedPrice05 = get(configs, 5).fixedPrice;
fixedPrice06 = get(configs, 6).fixedPrice;
fixedPrice07 = get(configs, 7).fixedPrice;
fixedPrice08 = get(configs, 8).fixedPrice;
fixedPrice09 = get(configs, 9).fixedPrice;
fixedPrice10 = get(configs, 10).fixedPrice;
fixedPrice11 = get(configs, 11).fixedPrice;
fixedPrice12 = get(configs, 12).fixedPrice;
fixedPrice13 = get(configs, 13).fixedPrice;
fixedPrice14 = get(configs, 14).fixedPrice;
fixedPrice15 = get(configs, 15).fixedPrice;
fixedPrice16 = get(configs, 16).fixedPrice;
fixedPrice17 = get(configs, 17).fixedPrice;
fixedPrice18 = get(configs, 18).fixedPrice;
fixedPrice19 = get(configs, 19).fixedPrice;
fixedPrice20 = get(configs, 20).fixedPrice;
fixedPrice21 = get(configs, 21).fixedPrice;
fixedPrice22 = get(configs, 22).fixedPrice;
fixedPrice23 = get(configs, 23).fixedPrice;
fixedPrice24 = get(configs, 24).fixedPrice;
fixedPrice25 = get(configs, 25).fixedPrice;
fixedPrice26 = get(configs, 26).fixedPrice;
fixedPrice27 = get(configs, 27).fixedPrice;
fixedPrice28 = get(configs, 28).fixedPrice;
fixedPrice29 = get(configs, 29).fixedPrice;
uniswapMarket00 = get(configs, 0).uniswapMarket;
uniswapMarket01 = get(configs, 1).uniswapMarket;
uniswapMarket02 = get(configs, 2).uniswapMarket;
uniswapMarket03 = get(configs, 3).uniswapMarket;
uniswapMarket04 = get(configs, 4).uniswapMarket;
uniswapMarket05 = get(configs, 5).uniswapMarket;
uniswapMarket06 = get(configs, 6).uniswapMarket;
uniswapMarket07 = get(configs, 7).uniswapMarket;
uniswapMarket08 = get(configs, 8).uniswapMarket;
uniswapMarket09 = get(configs, 9).uniswapMarket;
uniswapMarket10 = get(configs, 10).uniswapMarket;
uniswapMarket11 = get(configs, 11).uniswapMarket;
uniswapMarket12 = get(configs, 12).uniswapMarket;
uniswapMarket13 = get(configs, 13).uniswapMarket;
uniswapMarket14 = get(configs, 14).uniswapMarket;
uniswapMarket15 = get(configs, 15).uniswapMarket;
uniswapMarket16 = get(configs, 16).uniswapMarket;
uniswapMarket17 = get(configs, 17).uniswapMarket;
uniswapMarket18 = get(configs, 18).uniswapMarket;
uniswapMarket19 = get(configs, 19).uniswapMarket;
uniswapMarket20 = get(configs, 20).uniswapMarket;
uniswapMarket21 = get(configs, 21).uniswapMarket;
uniswapMarket22 = get(configs, 22).uniswapMarket;
uniswapMarket23 = get(configs, 23).uniswapMarket;
uniswapMarket24 = get(configs, 24).uniswapMarket;
uniswapMarket25 = get(configs, 25).uniswapMarket;
uniswapMarket26 = get(configs, 26).uniswapMarket;
uniswapMarket27 = get(configs, 27).uniswapMarket;
uniswapMarket28 = get(configs, 28).uniswapMarket;
uniswapMarket29 = get(configs, 29).uniswapMarket;
isUniswapReversed00 = get(configs, 0).isUniswapReversed;
isUniswapReversed01 = get(configs, 1).isUniswapReversed;
isUniswapReversed02 = get(configs, 2).isUniswapReversed;
isUniswapReversed03 = get(configs, 3).isUniswapReversed;
isUniswapReversed04 = get(configs, 4).isUniswapReversed;
isUniswapReversed05 = get(configs, 5).isUniswapReversed;
isUniswapReversed06 = get(configs, 6).isUniswapReversed;
isUniswapReversed07 = get(configs, 7).isUniswapReversed;
isUniswapReversed08 = get(configs, 8).isUniswapReversed;
isUniswapReversed09 = get(configs, 9).isUniswapReversed;
isUniswapReversed10 = get(configs, 10).isUniswapReversed;
isUniswapReversed11 = get(configs, 11).isUniswapReversed;
isUniswapReversed12 = get(configs, 12).isUniswapReversed;
isUniswapReversed13 = get(configs, 13).isUniswapReversed;
isUniswapReversed14 = get(configs, 14).isUniswapReversed;
isUniswapReversed15 = get(configs, 15).isUniswapReversed;
isUniswapReversed16 = get(configs, 16).isUniswapReversed;
isUniswapReversed17 = get(configs, 17).isUniswapReversed;
isUniswapReversed18 = get(configs, 18).isUniswapReversed;
isUniswapReversed19 = get(configs, 19).isUniswapReversed;
isUniswapReversed20 = get(configs, 20).isUniswapReversed;
isUniswapReversed21 = get(configs, 21).isUniswapReversed;
isUniswapReversed22 = get(configs, 22).isUniswapReversed;
isUniswapReversed23 = get(configs, 23).isUniswapReversed;
isUniswapReversed24 = get(configs, 24).isUniswapReversed;
isUniswapReversed25 = get(configs, 25).isUniswapReversed;
isUniswapReversed26 = get(configs, 26).isUniswapReversed;
isUniswapReversed27 = get(configs, 27).isUniswapReversed;
isUniswapReversed28 = get(configs, 28).isUniswapReversed;
isUniswapReversed29 = get(configs, 29).isUniswapReversed;
}
function get(TokenConfig[] memory configs, uint i) internal pure returns (TokenConfig memory) {
if (i < configs.length)
return configs[i];
return TokenConfig({
cToken: address(0),
underlying: address(0),
symbolHash: bytes32(0),
baseUnit: uint256(0),
priceSource: PriceSource(0),
fixedPrice: uint256(0),
uniswapMarket: address(0),
isUniswapReversed: false
});
}
function getCTokenIndex(address cToken) internal view returns (uint) {
if (cToken == cToken00) return 0;
if (cToken == cToken01) return 1;
if (cToken == cToken02) return 2;
if (cToken == cToken03) return 3;
if (cToken == cToken04) return 4;
if (cToken == cToken05) return 5;
if (cToken == cToken06) return 6;
if (cToken == cToken07) return 7;
if (cToken == cToken08) return 8;
if (cToken == cToken09) return 9;
if (cToken == cToken10) return 10;
if (cToken == cToken11) return 11;
if (cToken == cToken12) return 12;
if (cToken == cToken13) return 13;
if (cToken == cToken14) return 14;
if (cToken == cToken15) return 15;
if (cToken == cToken16) return 16;
if (cToken == cToken17) return 17;
if (cToken == cToken18) return 18;
if (cToken == cToken19) return 19;
if (cToken == cToken20) return 20;
if (cToken == cToken21) return 21;
if (cToken == cToken22) return 22;
if (cToken == cToken23) return 23;
if (cToken == cToken24) return 24;
if (cToken == cToken25) return 25;
if (cToken == cToken26) return 26;
if (cToken == cToken27) return 27;
if (cToken == cToken28) return 28;
if (cToken == cToken29) return 29;
return uint(-1);
}
function getUnderlyingIndex(address underlying) internal view returns (uint) {
if (underlying == underlying00) return 0;
if (underlying == underlying01) return 1;
if (underlying == underlying02) return 2;
if (underlying == underlying03) return 3;
if (underlying == underlying04) return 4;
if (underlying == underlying05) return 5;
if (underlying == underlying06) return 6;
if (underlying == underlying07) return 7;
if (underlying == underlying08) return 8;
if (underlying == underlying09) return 9;
if (underlying == underlying10) return 10;
if (underlying == underlying11) return 11;
if (underlying == underlying12) return 12;
if (underlying == underlying13) return 13;
if (underlying == underlying14) return 14;
if (underlying == underlying15) return 15;
if (underlying == underlying16) return 16;
if (underlying == underlying17) return 17;
if (underlying == underlying18) return 18;
if (underlying == underlying19) return 19;
if (underlying == underlying20) return 20;
if (underlying == underlying21) return 21;
if (underlying == underlying22) return 22;
if (underlying == underlying23) return 23;
if (underlying == underlying24) return 24;
if (underlying == underlying25) return 25;
if (underlying == underlying26) return 26;
if (underlying == underlying27) return 27;
if (underlying == underlying28) return 28;
if (underlying == underlying29) return 29;
return uint(-1);
}
function getSymbolHashIndex(bytes32 symbolHash) internal view returns (uint) {
if (symbolHash == symbolHash00) return 0;
if (symbolHash == symbolHash01) return 1;
if (symbolHash == symbolHash02) return 2;
if (symbolHash == symbolHash03) return 3;
if (symbolHash == symbolHash04) return 4;
if (symbolHash == symbolHash05) return 5;
if (symbolHash == symbolHash06) return 6;
if (symbolHash == symbolHash07) return 7;
if (symbolHash == symbolHash08) return 8;
if (symbolHash == symbolHash09) return 9;
if (symbolHash == symbolHash10) return 10;
if (symbolHash == symbolHash11) return 11;
if (symbolHash == symbolHash12) return 12;
if (symbolHash == symbolHash13) return 13;
if (symbolHash == symbolHash14) return 14;
if (symbolHash == symbolHash15) return 15;
if (symbolHash == symbolHash16) return 16;
if (symbolHash == symbolHash17) return 17;
if (symbolHash == symbolHash18) return 18;
if (symbolHash == symbolHash19) return 19;
if (symbolHash == symbolHash20) return 20;
if (symbolHash == symbolHash21) return 21;
if (symbolHash == symbolHash22) return 22;
if (symbolHash == symbolHash23) return 23;
if (symbolHash == symbolHash24) return 24;
if (symbolHash == symbolHash25) return 25;
if (symbolHash == symbolHash26) return 26;
if (symbolHash == symbolHash27) return 27;
if (symbolHash == symbolHash28) return 28;
if (symbolHash == symbolHash29) return 29;
return uint(-1);
}
/**
* @notice Get the i-th config, according to the order they were passed in originally
* @param i The index of the config to get
* @return The config object
*/
function getTokenConfig(uint i) public view returns (TokenConfig memory) {
require(i < numTokens, "token config not found");
if (i == 0) return TokenConfig({cToken: cToken00, underlying: underlying00, symbolHash: symbolHash00, baseUnit: baseUnit00, priceSource: priceSource00, fixedPrice: fixedPrice00, uniswapMarket: uniswapMarket00, isUniswapReversed: isUniswapReversed00});
if (i == 1) return TokenConfig({cToken: cToken01, underlying: underlying01, symbolHash: symbolHash01, baseUnit: baseUnit01, priceSource: priceSource01, fixedPrice: fixedPrice01, uniswapMarket: uniswapMarket01, isUniswapReversed: isUniswapReversed01});
if (i == 2) return TokenConfig({cToken: cToken02, underlying: underlying02, symbolHash: symbolHash02, baseUnit: baseUnit02, priceSource: priceSource02, fixedPrice: fixedPrice02, uniswapMarket: uniswapMarket02, isUniswapReversed: isUniswapReversed02});
if (i == 3) return TokenConfig({cToken: cToken03, underlying: underlying03, symbolHash: symbolHash03, baseUnit: baseUnit03, priceSource: priceSource03, fixedPrice: fixedPrice03, uniswapMarket: uniswapMarket03, isUniswapReversed: isUniswapReversed03});
if (i == 4) return TokenConfig({cToken: cToken04, underlying: underlying04, symbolHash: symbolHash04, baseUnit: baseUnit04, priceSource: priceSource04, fixedPrice: fixedPrice04, uniswapMarket: uniswapMarket04, isUniswapReversed: isUniswapReversed04});
if (i == 5) return TokenConfig({cToken: cToken05, underlying: underlying05, symbolHash: symbolHash05, baseUnit: baseUnit05, priceSource: priceSource05, fixedPrice: fixedPrice05, uniswapMarket: uniswapMarket05, isUniswapReversed: isUniswapReversed05});
if (i == 6) return TokenConfig({cToken: cToken06, underlying: underlying06, symbolHash: symbolHash06, baseUnit: baseUnit06, priceSource: priceSource06, fixedPrice: fixedPrice06, uniswapMarket: uniswapMarket06, isUniswapReversed: isUniswapReversed06});
if (i == 7) return TokenConfig({cToken: cToken07, underlying: underlying07, symbolHash: symbolHash07, baseUnit: baseUnit07, priceSource: priceSource07, fixedPrice: fixedPrice07, uniswapMarket: uniswapMarket07, isUniswapReversed: isUniswapReversed07});
if (i == 8) return TokenConfig({cToken: cToken08, underlying: underlying08, symbolHash: symbolHash08, baseUnit: baseUnit08, priceSource: priceSource08, fixedPrice: fixedPrice08, uniswapMarket: uniswapMarket08, isUniswapReversed: isUniswapReversed08});
if (i == 9) return TokenConfig({cToken: cToken09, underlying: underlying09, symbolHash: symbolHash09, baseUnit: baseUnit09, priceSource: priceSource09, fixedPrice: fixedPrice09, uniswapMarket: uniswapMarket09, isUniswapReversed: isUniswapReversed09});
if (i == 10) return TokenConfig({cToken: cToken10, underlying: underlying10, symbolHash: symbolHash10, baseUnit: baseUnit10, priceSource: priceSource10, fixedPrice: fixedPrice10, uniswapMarket: uniswapMarket10, isUniswapReversed: isUniswapReversed10});
if (i == 11) return TokenConfig({cToken: cToken11, underlying: underlying11, symbolHash: symbolHash11, baseUnit: baseUnit11, priceSource: priceSource11, fixedPrice: fixedPrice11, uniswapMarket: uniswapMarket11, isUniswapReversed: isUniswapReversed11});
if (i == 12) return TokenConfig({cToken: cToken12, underlying: underlying12, symbolHash: symbolHash12, baseUnit: baseUnit12, priceSource: priceSource12, fixedPrice: fixedPrice12, uniswapMarket: uniswapMarket12, isUniswapReversed: isUniswapReversed12});
if (i == 13) return TokenConfig({cToken: cToken13, underlying: underlying13, symbolHash: symbolHash13, baseUnit: baseUnit13, priceSource: priceSource13, fixedPrice: fixedPrice13, uniswapMarket: uniswapMarket13, isUniswapReversed: isUniswapReversed13});
if (i == 14) return TokenConfig({cToken: cToken14, underlying: underlying14, symbolHash: symbolHash14, baseUnit: baseUnit14, priceSource: priceSource14, fixedPrice: fixedPrice14, uniswapMarket: uniswapMarket14, isUniswapReversed: isUniswapReversed14});
if (i == 15) return TokenConfig({cToken: cToken15, underlying: underlying15, symbolHash: symbolHash15, baseUnit: baseUnit15, priceSource: priceSource15, fixedPrice: fixedPrice15, uniswapMarket: uniswapMarket15, isUniswapReversed: isUniswapReversed15});
if (i == 16) return TokenConfig({cToken: cToken16, underlying: underlying16, symbolHash: symbolHash16, baseUnit: baseUnit16, priceSource: priceSource16, fixedPrice: fixedPrice16, uniswapMarket: uniswapMarket16, isUniswapReversed: isUniswapReversed16});
if (i == 17) return TokenConfig({cToken: cToken17, underlying: underlying17, symbolHash: symbolHash17, baseUnit: baseUnit17, priceSource: priceSource17, fixedPrice: fixedPrice17, uniswapMarket: uniswapMarket17, isUniswapReversed: isUniswapReversed17});
if (i == 18) return TokenConfig({cToken: cToken18, underlying: underlying18, symbolHash: symbolHash18, baseUnit: baseUnit18, priceSource: priceSource18, fixedPrice: fixedPrice18, uniswapMarket: uniswapMarket18, isUniswapReversed: isUniswapReversed18});
if (i == 19) return TokenConfig({cToken: cToken19, underlying: underlying19, symbolHash: symbolHash19, baseUnit: baseUnit19, priceSource: priceSource19, fixedPrice: fixedPrice19, uniswapMarket: uniswapMarket19, isUniswapReversed: isUniswapReversed19});
if (i == 20) return TokenConfig({cToken: cToken20, underlying: underlying20, symbolHash: symbolHash20, baseUnit: baseUnit20, priceSource: priceSource20, fixedPrice: fixedPrice20, uniswapMarket: uniswapMarket20, isUniswapReversed: isUniswapReversed20});
if (i == 21) return TokenConfig({cToken: cToken21, underlying: underlying21, symbolHash: symbolHash21, baseUnit: baseUnit21, priceSource: priceSource21, fixedPrice: fixedPrice21, uniswapMarket: uniswapMarket21, isUniswapReversed: isUniswapReversed21});
if (i == 22) return TokenConfig({cToken: cToken22, underlying: underlying22, symbolHash: symbolHash22, baseUnit: baseUnit22, priceSource: priceSource22, fixedPrice: fixedPrice22, uniswapMarket: uniswapMarket22, isUniswapReversed: isUniswapReversed22});
if (i == 23) return TokenConfig({cToken: cToken23, underlying: underlying23, symbolHash: symbolHash23, baseUnit: baseUnit23, priceSource: priceSource23, fixedPrice: fixedPrice23, uniswapMarket: uniswapMarket23, isUniswapReversed: isUniswapReversed23});
if (i == 24) return TokenConfig({cToken: cToken24, underlying: underlying24, symbolHash: symbolHash24, baseUnit: baseUnit24, priceSource: priceSource24, fixedPrice: fixedPrice24, uniswapMarket: uniswapMarket24, isUniswapReversed: isUniswapReversed24});
if (i == 25) return TokenConfig({cToken: cToken25, underlying: underlying25, symbolHash: symbolHash25, baseUnit: baseUnit25, priceSource: priceSource25, fixedPrice: fixedPrice25, uniswapMarket: uniswapMarket25, isUniswapReversed: isUniswapReversed25});
if (i == 26) return TokenConfig({cToken: cToken26, underlying: underlying26, symbolHash: symbolHash26, baseUnit: baseUnit26, priceSource: priceSource26, fixedPrice: fixedPrice26, uniswapMarket: uniswapMarket26, isUniswapReversed: isUniswapReversed26});
if (i == 27) return TokenConfig({cToken: cToken27, underlying: underlying27, symbolHash: symbolHash27, baseUnit: baseUnit27, priceSource: priceSource27, fixedPrice: fixedPrice27, uniswapMarket: uniswapMarket27, isUniswapReversed: isUniswapReversed27});
if (i == 28) return TokenConfig({cToken: cToken28, underlying: underlying28, symbolHash: symbolHash28, baseUnit: baseUnit28, priceSource: priceSource28, fixedPrice: fixedPrice28, uniswapMarket: uniswapMarket28, isUniswapReversed: isUniswapReversed28});
if (i == 29) return TokenConfig({cToken: cToken29, underlying: underlying29, symbolHash: symbolHash29, baseUnit: baseUnit29, priceSource: priceSource29, fixedPrice: fixedPrice29, uniswapMarket: uniswapMarket29, isUniswapReversed: isUniswapReversed29});
}
/**
* @notice Get the config for symbol
* @param symbol The symbol of the config to get
* @return The config object
*/
function getTokenConfigBySymbol(string memory symbol) public view returns (TokenConfig memory) {
return getTokenConfigBySymbolHash(keccak256(abi.encodePacked(symbol)));
}
/**
* @notice Get the config for the symbolHash
* @param symbolHash The keccack256 of the symbol of the config to get
* @return The config object
*/
function getTokenConfigBySymbolHash(bytes32 symbolHash) public view returns (TokenConfig memory) {
uint index = getSymbolHashIndex(symbolHash);
if (index != uint(-1)) {
return getTokenConfig(index);
}
revert("token config not found");
}
/**
* @notice Get the config for the cToken
* @dev If a config for the cToken is not found, falls back to searching for the underlying.
* @param cToken The address of the cToken of the config to get
* @return The config object
*/
function getTokenConfigByCToken(address cToken) public view returns (TokenConfig memory) {
uint index = getCTokenIndex(cToken);
if (index != uint(-1)) {
return getTokenConfig(index);
}
return getTokenConfigByUnderlying(CErc20(cToken).underlying());
}
/**
* @notice Get the config for an underlying asset
* @param underlying The address of the underlying asset of the config to get
* @return The config object
*/
function getTokenConfigByUnderlying(address underlying) public view returns (TokenConfig memory) {
uint index = getUnderlyingIndex(underlying);
if (index != uint(-1)) {
return getTokenConfig(index);
}
revert("token config not found");
}
}
// Based on code from https://github.com/Uniswap/uniswap-v2-periphery
// a library for handling binary fixed point numbers (https://en.wikipedia.org/wiki/Q_(number_format))
library FixedPoint {
// range: [0, 2**112 - 1]
// resolution: 1 / 2**112
struct uq112x112 {
uint224 _x;
}
// returns a uq112x112 which represents the ratio of the numerator to the denominator
// equivalent to encode(numerator).div(denominator)
function fraction(uint112 numerator, uint112 denominator) internal pure returns (uq112x112 memory) {
require(denominator > 0, "FixedPoint: DIV_BY_ZERO");
return uq112x112((uint224(numerator) << 112) / denominator);
}
// decode a uq112x112 into a uint with 18 decimals of precision
function decode112with18(uq112x112 memory self) internal pure returns (uint) {
// we only have 256 - 224 = 32 bits to spare, so scaling up by ~60 bits is dangerous
// instead, get close to:
// (x * 1e18) >> 112
// without risk of overflowing, e.g.:
// (x) / 2 ** (112 - lg(1e18))
return uint(self._x) / 5192296858534827;
}
}
// library with helper methods for oracles that are concerned with computing average prices
library UniswapV2OracleLibrary {
using FixedPoint for *;
// helper function that returns the current block timestamp within the range of uint32, i.e. [0, 2**32 - 1]
function currentBlockTimestamp() internal view returns (uint32) {
return uint32(block.timestamp % 2 ** 32);
}
// produces the cumulative price using counterfactuals to save gas and avoid a call to sync.
function currentCumulativePrices(
address pair
) internal view returns (uint price0Cumulative, uint price1Cumulative, uint32 blockTimestamp) {
blockTimestamp = currentBlockTimestamp();
price0Cumulative = IUniswapV2Pair(pair).price0CumulativeLast();
price1Cumulative = IUniswapV2Pair(pair).price1CumulativeLast();
// if time has elapsed since the last update on the pair, mock the accumulated price values
(uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast) = IUniswapV2Pair(pair).getReserves();
if (blockTimestampLast != blockTimestamp) {
// subtraction overflow is desired
uint32 timeElapsed = blockTimestamp - blockTimestampLast;
// addition overflow is desired
// counterfactual
price0Cumulative += uint(FixedPoint.fraction(reserve1, reserve0)._x) * timeElapsed;
// counterfactual
price1Cumulative += uint(FixedPoint.fraction(reserve0, reserve1)._x) * timeElapsed;
}
}
}
interface IUniswapV2Pair {
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
}
struct Observation {
uint timestamp;
uint acc;
}
contract UniswapAnchoredView is UniswapConfig {
using FixedPoint for *;
/// @notice The Open Oracle Price Data contract
OpenOraclePriceData public immutable priceData;
/// @notice The number of wei in 1 ETH
uint public constant ethBaseUnit = 1e18;
/// @notice A common scaling factor to maintain precision
uint public constant expScale = 1e18;
/// @notice The Open Oracle Reporter
address public immutable reporter;
/// @notice The highest ratio of the new price to the anchor price that will still trigger the price to be updated
uint public immutable upperBoundAnchorRatio;
/// @notice The lowest ratio of the new price to the anchor price that will still trigger the price to be updated
uint public immutable lowerBoundAnchorRatio;
/// @notice The minimum amount of time in seconds required for the old uniswap price accumulator to be replaced
uint public immutable anchorPeriod;
/// @notice Official prices by symbol hash
mapping(bytes32 => uint) public prices;
/// @notice Circuit breaker for using anchor price oracle directly, ignoring reporter
bool public reporterInvalidated;
/// @notice The old observation for each symbolHash
mapping(bytes32 => Observation) public oldObservations;
/// @notice The new observation for each symbolHash
mapping(bytes32 => Observation) public newObservations;
/// @notice The event emitted when new prices are posted but the stored price is not updated due to the anchor
event PriceGuarded(string symbol, uint reporter, uint anchor);
/// @notice The event emitted when the stored price is updated
event PriceUpdated(string symbol, uint price);
/// @notice The event emitted when anchor price is updated
event AnchorPriceUpdated(string symbol, uint anchorPrice, uint oldTimestamp, uint newTimestamp);
/// @notice The event emitted when the uniswap window changes
event UniswapWindowUpdated(bytes32 indexed symbolHash, uint oldTimestamp, uint newTimestamp, uint oldPrice, uint newPrice);
/// @notice The event emitted when reporter invalidates itself
event ReporterInvalidated(address reporter);
bytes32 constant ethHash = keccak256(abi.encodePacked("ETH"));
bytes32 constant rotateHash = keccak256(abi.encodePacked("rotate"));
/**
* @notice Construct a uniswap anchored view for a set of token configurations
* @dev Note that to avoid immature TWAPs, the system must run for at least a single anchorPeriod before using.
* @param reporter_ The reporter whose prices are to be used
* @param anchorToleranceMantissa_ The percentage tolerance that the reporter may deviate from the uniswap anchor
* @param anchorPeriod_ The minimum amount of time required for the old uniswap price accumulator to be replaced
* @param configs The static token configurations which define what prices are supported and how
*/
constructor(OpenOraclePriceData priceData_,
address reporter_,
uint anchorToleranceMantissa_,
uint anchorPeriod_,
TokenConfig[] memory configs) UniswapConfig(configs) public {
priceData = priceData_;
reporter = reporter_;
anchorPeriod = anchorPeriod_;
// Allow the tolerance to be whatever the deployer chooses, but prevent under/overflow (and prices from being 0)
upperBoundAnchorRatio = anchorToleranceMantissa_ > uint(-1) - 100e16 ? uint(-1) : 100e16 + anchorToleranceMantissa_;
lowerBoundAnchorRatio = anchorToleranceMantissa_ < 100e16 ? 100e16 - anchorToleranceMantissa_ : 1;
for (uint i = 0; i < configs.length; i++) {
TokenConfig memory config = configs[i];
require(config.baseUnit > 0, "baseUnit must be greater than zero");
address uniswapMarket = config.uniswapMarket;
if (config.priceSource == PriceSource.REPORTER) {
require(uniswapMarket != address(0), "reported prices must have an anchor");
bytes32 symbolHash = config.symbolHash;
uint cumulativePrice = currentCumulativePrice(config);
oldObservations[symbolHash].timestamp = block.timestamp;
newObservations[symbolHash].timestamp = block.timestamp;
oldObservations[symbolHash].acc = cumulativePrice;
newObservations[symbolHash].acc = cumulativePrice;
emit UniswapWindowUpdated(symbolHash, block.timestamp, block.timestamp, cumulativePrice, cumulativePrice);
} else {
require(uniswapMarket == address(0), "only reported prices utilize an anchor");
}
}
}
/**
* @notice Get the official price for a symbol
* @param symbol The symbol to fetch the price of
* @return Price denominated in USD, with 6 decimals
*/
function price(string memory symbol) external view returns (uint) {
TokenConfig memory config = getTokenConfigBySymbol(symbol);
return priceInternal(config);
}
function priceInternal(TokenConfig memory config) internal view returns (uint) {
if (config.priceSource == PriceSource.REPORTER) return prices[config.symbolHash];
if (config.priceSource == PriceSource.FIXED_USD) return config.fixedPrice;
if (config.priceSource == PriceSource.FIXED_ETH) {
uint usdPerEth = prices[ethHash];
require(usdPerEth > 0, "ETH price not set, cannot convert to dollars");
return mul(usdPerEth, config.fixedPrice) / ethBaseUnit;
}
}
/**
* @notice Get the underlying price of a cToken
* @dev Implements the PriceOracle interface for Compound v2.
* @param cToken The cToken address for price retrieval
* @return Price denominated in USD, with 18 decimals, for the given cToken address
*/
function getUnderlyingPrice(address cToken) external view returns (uint) {
TokenConfig memory config = getTokenConfigByCToken(cToken);
// Comptroller needs prices in the format: ${raw price} * 1e(36 - baseUnit)
// Since the prices in this view have 6 decimals, we must scale them by 1e(36 - 6 - baseUnit)
return mul(1e30, priceInternal(config)) / config.baseUnit;
}
/**
* @notice Post open oracle reporter prices, and recalculate stored price by comparing to anchor
* @dev We let anyone pay to post anything, but only prices from configured reporter will be stored in the view.
* @param messages The messages to post to the oracle
* @param signatures The signatures for the corresponding messages
* @param symbols The symbols to compare to anchor for authoritative reading
*/
function postPrices(bytes[] calldata messages, bytes[] calldata signatures, string[] calldata symbols) external {
require(messages.length == signatures.length, "messages and signatures must be 1:1");
// Save the prices
for (uint i = 0; i < messages.length; i++) {
priceData.put(messages[i], signatures[i]);
}
uint ethPrice = fetchEthPrice();
// Try to update the view storage
for (uint i = 0; i < symbols.length; i++) {
postPriceInternal(symbols[i], ethPrice);
}
}
function postPriceInternal(string memory symbol, uint ethPrice) internal {
TokenConfig memory config = getTokenConfigBySymbol(symbol);
require(config.priceSource == PriceSource.REPORTER, "only reporter prices get posted");
bytes32 symbolHash = keccak256(abi.encodePacked(symbol));
uint reporterPrice = priceData.getPrice(reporter, symbol);
uint anchorPrice;
if (symbolHash == ethHash) {
anchorPrice = ethPrice;
} else {
anchorPrice = fetchAnchorPrice(symbol, config, ethPrice);
}
if (reporterInvalidated) {
prices[symbolHash] = anchorPrice;
emit PriceUpdated(symbol, anchorPrice);
} else if (isWithinAnchor(reporterPrice, anchorPrice)) {
prices[symbolHash] = reporterPrice;
emit PriceUpdated(symbol, reporterPrice);
} else {
emit PriceGuarded(symbol, reporterPrice, anchorPrice);
}
}
function isWithinAnchor(uint reporterPrice, uint anchorPrice) internal view returns (bool) {
if (reporterPrice > 0) {
uint anchorRatio = mul(anchorPrice, 100e16) / reporterPrice;
return anchorRatio <= upperBoundAnchorRatio && anchorRatio >= lowerBoundAnchorRatio;
}
return false;
}
/**
* @dev Fetches the current token/eth price accumulator from uniswap.
*/
function currentCumulativePrice(TokenConfig memory config) internal view returns (uint) {
(uint cumulativePrice0, uint cumulativePrice1,) = UniswapV2OracleLibrary.currentCumulativePrices(config.uniswapMarket);
if (config.isUniswapReversed) {
return cumulativePrice1;
} else {
return cumulativePrice0;
}
}
/**
* @dev Fetches the current eth/usd price from uniswap, with 6 decimals of precision.
* Conversion factor is 1e18 for eth/usdc market, since we decode uniswap price statically with 18 decimals.
*/
function fetchEthPrice() internal returns (uint) {
return fetchAnchorPrice("ETH", getTokenConfigBySymbolHash(ethHash), ethBaseUnit);
}
/**
* @dev Fetches the current token/usd price from uniswap, with 6 decimals of precision.
* @param conversionFactor 1e18 if seeking the ETH price, and a 6 decimal ETH-USDC price in the case of other assets
*/
function fetchAnchorPrice(string memory symbol, TokenConfig memory config, uint conversionFactor) internal virtual returns (uint) {
(uint nowCumulativePrice, uint oldCumulativePrice, uint oldTimestamp) = pokeWindowValues(config);
// This should be impossible, but better safe than sorry
require(block.timestamp > oldTimestamp, "now must come after before");
uint timeElapsed = block.timestamp - oldTimestamp;
// Calculate uniswap time-weighted average price
// Underflow is a property of the accumulators: https://uniswap.org/audit.html#orgc9b3190
FixedPoint.uq112x112 memory priceAverage = FixedPoint.uq112x112(uint224((nowCumulativePrice - oldCumulativePrice) / timeElapsed));
uint rawUniswapPriceMantissa = priceAverage.decode112with18();
uint unscaledPriceMantissa = mul(rawUniswapPriceMantissa, conversionFactor);
uint anchorPrice;
// Adjust rawUniswapPrice according to the units of the non-ETH asset
// In the case of ETH, we would have to scale by 1e6 / USDC_UNITS, but since baseUnit2 is 1e6 (USDC), it cancels
if (config.isUniswapReversed) {
// unscaledPriceMantissa * ethBaseUnit / config.baseUnit / expScale, but we simplify bc ethBaseUnit == expScale
anchorPrice = unscaledPriceMantissa / config.baseUnit;
} else {
anchorPrice = mul(unscaledPriceMantissa, config.baseUnit) / ethBaseUnit / expScale;
}
emit AnchorPriceUpdated(symbol, anchorPrice, oldTimestamp, block.timestamp);
return anchorPrice;
}
/**
* @dev Get time-weighted average prices for a token at the current timestamp.
* Update new and old observations of lagging window if period elapsed.
*/
function pokeWindowValues(TokenConfig memory config) internal returns (uint, uint, uint) {
bytes32 symbolHash = config.symbolHash;
uint cumulativePrice = currentCumulativePrice(config);
Observation memory newObservation = newObservations[symbolHash];
// Update new and old observations if elapsed time is greater than or equal to anchor period
uint timeElapsed = block.timestamp - newObservation.timestamp;
if (timeElapsed >= anchorPeriod) {
oldObservations[symbolHash].timestamp = newObservation.timestamp;
oldObservations[symbolHash].acc = newObservation.acc;
newObservations[symbolHash].timestamp = block.timestamp;
newObservations[symbolHash].acc = cumulativePrice;
emit UniswapWindowUpdated(config.symbolHash, newObservation.timestamp, block.timestamp, newObservation.acc, cumulativePrice);
}
return (cumulativePrice, oldObservations[symbolHash].acc, oldObservations[symbolHash].timestamp);
}
/**
* @notice Invalidate the reporter, and fall back to using anchor directly in all cases
* @dev Only the reporter may sign a message which allows it to invalidate itself.
* To be used in cases of emergency, if the reporter thinks their key may be compromised.
* @param message The data that was presumably signed
* @param signature The fingerprint of the data + private key
*/
function invalidateReporter(bytes memory message, bytes memory signature) external {
(string memory decodedMessage, ) = abi.decode(message, (string, address));
require(keccak256(abi.encodePacked(decodedMessage)) == rotateHash, "invalid message must be 'rotate'");
require(source(message, signature) == reporter, "invalidation message must come from the reporter");
reporterInvalidated = true;
emit ReporterInvalidated(reporter);
}
/**
* @notice Recovers the source address which signed a message
* @dev Comparing to a claimed address would add nothing,
* as the caller could simply perform the recover and claim that address.
* @param message The data that was presumably signed
* @param signature The fingerprint of the data + private key
* @return The source address which signed the message, presumably
*/
function source(bytes memory message, bytes memory signature) public pure returns (address) {
(bytes32 r, bytes32 s, uint8 v) = abi.decode(signature, (bytes32, bytes32, uint8));
bytes32 hash = keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", keccak256(message)));
return ecrecover(hash, v, r, s);
}
/// @dev Overflow proof multiplication
function mul(uint a, uint b) internal pure returns (uint) {
if (a == 0) return 0;
uint c = a * b;
require(c / a == b, "multiplication overflow");
return c;
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
5641,
1011,
2603,
1008,
1013,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
5511,
1011,
6021,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
14246,
2140,
1011,
1017,
1012,
1014,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2184,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
1013,
1008,
1008,
1008,
1030,
2516,
1996,
2330,
14721,
2951,
2918,
3206,
1008,
1030,
3166,
7328,
13625,
1010,
4297,
1012,
1008,
1013,
3206,
2330,
6525,
14321,
2850,
2696,
1063,
1013,
1008,
1008,
1008,
1030,
5060,
1996,
2724,
22627,
2043,
1037,
3120,
7009,
2000,
2049,
5527,
1008,
1013,
1013,
1013,
2724,
4339,
1006,
4769,
25331,
3120,
1010,
1026,
3145,
1028,
25331,
3145,
1010,
5164,
2785,
1010,
21318,
3372,
21084,
2335,
15464,
2361,
1010,
1026,
3643,
1028,
3643,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
5060,
4339,
1037,
9129,
1997,
2772,
23755,
2819,
2000,
1996,
14469,
4383,
5527,
12375,
1008,
1030,
11498,
2213,
4471,
1996,
18093,
4820,
1996,
2335,
15464,
2361,
1010,
1998,
1006,
3145,
1010,
3643,
1007,
7689,
1008,
1030,
11498,
2213,
8085,
1996,
19888,
13705,
8085,
1997,
1996,
4471,
18093,
1010,
3166,
6026,
1996,
3120,
2000,
4339,
1008,
1030,
2709,
1996,
6309,
2008,
2020,
2517,
1008,
1013,
1013,
1013,
3853,
2404,
1006,
27507,
2655,
2850,
2696,
4471,
1010,
27507,
2655,
2850,
2696,
8085,
1007,
6327,
5651,
1006,
1026,
3145,
1028,
3638,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
5060,
3191,
1037,
2309,
3145,
2007,
1037,
3653,
1011,
4225,
2828,
8085,
2013,
2019,
14469,
4383,
3120,
1008,
1030,
11498,
2213,
3120,
1996,
2310,
3089,
22749,
3468,
3166,
1997,
1996,
2951,
1008,
1030,
11498,
2213,
3145,
1996,
27000,
2005,
1996,
3643,
2000,
2709,
1008,
1030,
2709,
1996,
3555,
19998,
2335,
15464,
2361,
2005,
1996,
2951,
1998,
1996,
12359,
3643,
1006,
12398,
2015,
2000,
1006,
1014,
1010,
1014,
2595,
1007,
1007,
1008,
1013,
1013,
1013,
3853,
2131,
1006,
4769,
3120,
1010,
1026,
3145,
1028,
3145,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
1010,
1026,
3643,
1028,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
5060,
8980,
2015,
1996,
3120,
4769,
2029,
2772,
1037,
4471,
1008,
1030,
16475,
13599,
2000,
1037,
3555,
4769,
2052,
5587,
2498,
1010,
1008,
2004,
1996,
20587,
2071,
3432,
4685,
1996,
8980,
1998,
4366,
2008,
4769,
1012,
1008,
1030,
11498,
2213,
4471,
1996,
2951,
2008,
2001,
10712,
2772,
1008,
1030,
11498,
2213,
8085,
1996,
4344,
16550,
1997,
1996,
2951,
1009,
2797,
3145,
1008,
1030,
2709,
1996,
3120,
4769,
2029,
2772,
1996,
4471,
1010,
10712,
1008,
1013,
3853,
3120,
1006,
27507,
3638,
4471,
1010,
27507,
3638,
8085,
1007,
2270,
5760,
5651,
1006,
4769,
1007,
1063,
1006,
27507,
16703,
1054,
1010,
27507,
16703,
1055,
1010,
21318,
3372,
2620,
1058,
1007,
1027,
11113,
2072,
1012,
21933,
3207,
1006,
8085,
1010,
1006,
27507,
16703,
1010,
27507,
16703,
1010,
21318,
3372,
2620,
1007,
1007,
1025,
27507,
16703,
23325,
1027,
17710,
16665,
2243,
17788,
2575,
1006,
11113,
2072,
1012,
4372,
16044,
23947,
2098,
1006,
1000,
1032,
1060,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/*
Copyright 2017 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity 0.4.14;
/*
* Ownable
*
* Base contract with an owner.
* Provides onlyOwner modifier, which prevents function from running if it is called by anyone other than the owner.
*/
contract Ownable {
address public owner;
function Ownable() {
owner = msg.sender;
}
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) onlyOwner {
if (newOwner != address(0)) {
owner = newOwner;
}
}
}
contract Token {
/// @return total amount of tokens
function totalSupply() constant returns (uint supply) {}
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant returns (uint balance) {}
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint _value) returns (bool success) {}
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint _value) returns (bool success) {}
/// @notice `msg.sender` approves `_addr` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of wei to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint _value) returns (bool success) {}
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant returns (uint remaining) {}
event Transfer(address indexed _from, address indexed _to, uint _value);
event Approval(address indexed _owner, address indexed _spender, uint _value);
}
/// @title TokenTransferProxy - Transfers tokens on behalf of contracts that have been approved via decentralized governance.
/// @author Amir Bandeali - <<span class="__cf_email__" data-cfemail="ccada1a5be8cfcb49cbea3a6a9afb8e2afa3a1">[email protected]</span>>, Will Warren - <<span class="__cf_email__" data-cfemail="c2b5abaeae82f2ba92b0ada8a7a1b6eca1adaf">[email protected]</span>>
contract TokenTransferProxy is Ownable {
/// @dev Only authorized addresses can invoke functions with this modifier.
modifier onlyAuthorized {
require(authorized[msg.sender]);
_;
}
modifier targetAuthorized(address target) {
require(authorized[target]);
_;
}
modifier targetNotAuthorized(address target) {
require(!authorized[target]);
_;
}
mapping (address => bool) public authorized;
address[] public authorities;
event LogAuthorizedAddressAdded(address indexed target, address indexed caller);
event LogAuthorizedAddressRemoved(address indexed target, address indexed caller);
/*
* Public functions
*/
/// @dev Authorizes an address.
/// @param target Address to authorize.
function addAuthorizedAddress(address target)
public
onlyOwner
targetNotAuthorized(target)
{
authorized[target] = true;
authorities.push(target);
LogAuthorizedAddressAdded(target, msg.sender);
}
/// @dev Removes authorizion of an address.
/// @param target Address to remove authorization from.
function removeAuthorizedAddress(address target)
public
onlyOwner
targetAuthorized(target)
{
delete authorized[target];
for (uint i = 0; i < authorities.length; i++) {
if (authorities[i] == target) {
authorities[i] = authorities[authorities.length - 1];
authorities.length -= 1;
break;
}
}
LogAuthorizedAddressRemoved(target, msg.sender);
}
/// @dev Calls into ERC20 Token contract, invoking transferFrom.
/// @param token Address of token to transfer.
/// @param from Address to transfer token from.
/// @param to Address to transfer token to.
/// @param value Amount of token to transfer.
/// @return Success of transfer.
function transferFrom(
address token,
address from,
address to,
uint value)
public
onlyAuthorized
returns (bool)
{
return Token(token).transferFrom(from, to, value);
}
/*
* Public constant functions
*/
/// @dev Gets all authorized addresses.
/// @return Array of authorized addresses.
function getAuthorizedAddresses()
public
constant
returns (address[])
{
return authorities;
}
}
contract SafeMath {
function safeMul(uint a, uint b) internal constant returns (uint256) {
uint c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function safeDiv(uint a, uint b) internal constant returns (uint256) {
uint c = a / b;
return c;
}
function safeSub(uint a, uint b) internal constant returns (uint256) {
assert(b <= a);
return a - b;
}
function safeAdd(uint a, uint b) internal constant returns (uint256) {
uint c = a + b;
assert(c >= a);
return c;
}
function max64(uint64 a, uint64 b) internal constant returns (uint64) {
return a >= b ? a : b;
}
function min64(uint64 a, uint64 b) internal constant returns (uint64) {
return a < b ? a : b;
}
function max256(uint256 a, uint256 b) internal constant returns (uint256) {
return a >= b ? a : b;
}
function min256(uint256 a, uint256 b) internal constant returns (uint256) {
return a < b ? a : b;
}
}
/// @title Exchange - Facilitates exchange of ERC20 tokens.
/// @author Amir Bandeali - <<span class="__cf_email__" data-cfemail="0c6d61657e4c3c745c7e6366696f78226f6361">[email protected]</span>>, Will Warren - <<span class="__cf_email__" data-cfemail="22554b4e4e62125a72504d484741560c414d4f">[email protected]</span>>
contract Exchange is SafeMath {
// Error Codes
enum Errors {
ORDER_EXPIRED, // Order has already expired
ORDER_FULLY_FILLED_OR_CANCELLED, // Order has already been fully filled or cancelled
ROUNDING_ERROR_TOO_LARGE, // Rounding error too large
INSUFFICIENT_BALANCE_OR_ALLOWANCE // Insufficient balance or allowance for token transfer
}
string constant public VERSION = "1.0.0";
uint16 constant public EXTERNAL_QUERY_GAS_LIMIT = 4999; // Changes to state require at least 5000 gas
address public ZRX_TOKEN_CONTRACT;
address public TOKEN_TRANSFER_PROXY_CONTRACT;
// Mappings of orderHash => amounts of takerTokenAmount filled or cancelled.
mapping (bytes32 => uint) public filled;
mapping (bytes32 => uint) public cancelled;
event LogFill(
address indexed maker,
address taker,
address indexed feeRecipient,
address makerToken,
address takerToken,
uint filledMakerTokenAmount,
uint filledTakerTokenAmount,
uint paidMakerFee,
uint paidTakerFee,
bytes32 indexed tokens, // keccak256(makerToken, takerToken), allows subscribing to a token pair
bytes32 orderHash
);
event LogCancel(
address indexed maker,
address indexed feeRecipient,
address makerToken,
address takerToken,
uint cancelledMakerTokenAmount,
uint cancelledTakerTokenAmount,
bytes32 indexed tokens,
bytes32 orderHash
);
event LogError(uint8 indexed errorId, bytes32 indexed orderHash);
struct Order {
address maker;
address taker;
address makerToken;
address takerToken;
address feeRecipient;
uint makerTokenAmount;
uint takerTokenAmount;
uint makerFee;
uint takerFee;
uint expirationTimestampInSec;
bytes32 orderHash;
}
function Exchange(address _zrxToken, address _tokenTransferProxy) {
ZRX_TOKEN_CONTRACT = _zrxToken;
TOKEN_TRANSFER_PROXY_CONTRACT = _tokenTransferProxy;
}
/*
* Core exchange functions
*/
/// @dev Fills the input order.
/// @param orderAddresses Array of order's maker, taker, makerToken, takerToken, and feeRecipient.
/// @param orderValues Array of order's makerTokenAmount, takerTokenAmount, makerFee, takerFee, expirationTimestampInSec, and salt.
/// @param fillTakerTokenAmount Desired amount of takerToken to fill.
/// @param shouldThrowOnInsufficientBalanceOrAllowance Test if transfer will fail before attempting.
/// @param v ECDSA signature parameter v.
/// @param r ECDSA signature parameters r.
/// @param s ECDSA signature parameters s.
/// @return Total amount of takerToken filled in trade.
function fillOrder(
address[5] orderAddresses,
uint[6] orderValues,
uint fillTakerTokenAmount,
bool shouldThrowOnInsufficientBalanceOrAllowance,
uint8 v,
bytes32 r,
bytes32 s)
public
returns (uint filledTakerTokenAmount)
{
Order memory order = Order({
maker: orderAddresses[0],
taker: orderAddresses[1],
makerToken: orderAddresses[2],
takerToken: orderAddresses[3],
feeRecipient: orderAddresses[4],
makerTokenAmount: orderValues[0],
takerTokenAmount: orderValues[1],
makerFee: orderValues[2],
takerFee: orderValues[3],
expirationTimestampInSec: orderValues[4],
orderHash: getOrderHash(orderAddresses, orderValues)
});
require(order.taker == address(0) || order.taker == msg.sender);
require(order.makerTokenAmount > 0 && order.takerTokenAmount > 0 && fillTakerTokenAmount > 0);
require(isValidSignature(
order.maker,
order.orderHash,
v,
r,
s
));
if (block.timestamp >= order.expirationTimestampInSec) {
LogError(uint8(Errors.ORDER_EXPIRED), order.orderHash);
return 0;
}
uint remainingTakerTokenAmount = safeSub(order.takerTokenAmount, getUnavailableTakerTokenAmount(order.orderHash));
filledTakerTokenAmount = min256(fillTakerTokenAmount, remainingTakerTokenAmount);
if (filledTakerTokenAmount == 0) {
LogError(uint8(Errors.ORDER_FULLY_FILLED_OR_CANCELLED), order.orderHash);
return 0;
}
if (isRoundingError(filledTakerTokenAmount, order.takerTokenAmount, order.makerTokenAmount)) {
LogError(uint8(Errors.ROUNDING_ERROR_TOO_LARGE), order.orderHash);
return 0;
}
if (!shouldThrowOnInsufficientBalanceOrAllowance && !isTransferable(order, filledTakerTokenAmount)) {
LogError(uint8(Errors.INSUFFICIENT_BALANCE_OR_ALLOWANCE), order.orderHash);
return 0;
}
uint filledMakerTokenAmount = getPartialAmount(filledTakerTokenAmount, order.takerTokenAmount, order.makerTokenAmount);
uint paidMakerFee;
uint paidTakerFee;
filled[order.orderHash] = safeAdd(filled[order.orderHash], filledTakerTokenAmount);
require(transferViaTokenTransferProxy(
order.makerToken,
order.maker,
msg.sender,
filledMakerTokenAmount
));
require(transferViaTokenTransferProxy(
order.takerToken,
msg.sender,
order.maker,
filledTakerTokenAmount
));
if (order.feeRecipient != address(0)) {
if (order.makerFee > 0) {
paidMakerFee = getPartialAmount(filledTakerTokenAmount, order.takerTokenAmount, order.makerFee);
require(transferViaTokenTransferProxy(
ZRX_TOKEN_CONTRACT,
order.maker,
order.feeRecipient,
paidMakerFee
));
}
if (order.takerFee > 0) {
paidTakerFee = getPartialAmount(filledTakerTokenAmount, order.takerTokenAmount, order.takerFee);
require(transferViaTokenTransferProxy(
ZRX_TOKEN_CONTRACT,
msg.sender,
order.feeRecipient,
paidTakerFee
));
}
}
LogFill(
order.maker,
msg.sender,
order.feeRecipient,
order.makerToken,
order.takerToken,
filledMakerTokenAmount,
filledTakerTokenAmount,
paidMakerFee,
paidTakerFee,
keccak256(order.makerToken, order.takerToken),
order.orderHash
);
return filledTakerTokenAmount;
}
/// @dev Cancels the input order.
/// @param orderAddresses Array of order's maker, taker, makerToken, takerToken, and feeRecipient.
/// @param orderValues Array of order's makerTokenAmount, takerTokenAmount, makerFee, takerFee, expirationTimestampInSec, and salt.
/// @param cancelTakerTokenAmount Desired amount of takerToken to cancel in order.
/// @return Amount of takerToken cancelled.
function cancelOrder(
address[5] orderAddresses,
uint[6] orderValues,
uint cancelTakerTokenAmount)
public
returns (uint)
{
Order memory order = Order({
maker: orderAddresses[0],
taker: orderAddresses[1],
makerToken: orderAddresses[2],
takerToken: orderAddresses[3],
feeRecipient: orderAddresses[4],
makerTokenAmount: orderValues[0],
takerTokenAmount: orderValues[1],
makerFee: orderValues[2],
takerFee: orderValues[3],
expirationTimestampInSec: orderValues[4],
orderHash: getOrderHash(orderAddresses, orderValues)
});
require(order.maker == msg.sender);
require(order.makerTokenAmount > 0 && order.takerTokenAmount > 0 && cancelTakerTokenAmount > 0);
if (block.timestamp >= order.expirationTimestampInSec) {
LogError(uint8(Errors.ORDER_EXPIRED), order.orderHash);
return 0;
}
uint remainingTakerTokenAmount = safeSub(order.takerTokenAmount, getUnavailableTakerTokenAmount(order.orderHash));
uint cancelledTakerTokenAmount = min256(cancelTakerTokenAmount, remainingTakerTokenAmount);
if (cancelledTakerTokenAmount == 0) {
LogError(uint8(Errors.ORDER_FULLY_FILLED_OR_CANCELLED), order.orderHash);
return 0;
}
cancelled[order.orderHash] = safeAdd(cancelled[order.orderHash], cancelledTakerTokenAmount);
LogCancel(
order.maker,
order.feeRecipient,
order.makerToken,
order.takerToken,
getPartialAmount(cancelledTakerTokenAmount, order.takerTokenAmount, order.makerTokenAmount),
cancelledTakerTokenAmount,
keccak256(order.makerToken, order.takerToken),
order.orderHash
);
return cancelledTakerTokenAmount;
}
/*
* Wrapper functions
*/
/// @dev Fills an order with specified parameters and ECDSA signature, throws if specified amount not filled entirely.
/// @param orderAddresses Array of order's maker, taker, makerToken, takerToken, and feeRecipient.
/// @param orderValues Array of order's makerTokenAmount, takerTokenAmount, makerFee, takerFee, expirationTimestampInSec, and salt.
/// @param fillTakerTokenAmount Desired amount of takerToken to fill.
/// @param v ECDSA signature parameter v.
/// @param r ECDSA signature parameters r.
/// @param s ECDSA signature parameters s.
function fillOrKillOrder(
address[5] orderAddresses,
uint[6] orderValues,
uint fillTakerTokenAmount,
uint8 v,
bytes32 r,
bytes32 s)
public
{
require(fillOrder(
orderAddresses,
orderValues,
fillTakerTokenAmount,
false,
v,
r,
s
) == fillTakerTokenAmount);
}
/// @dev Synchronously executes multiple fill orders in a single transaction.
/// @param orderAddresses Array of address arrays containing individual order addresses.
/// @param orderValues Array of uint arrays containing individual order values.
/// @param fillTakerTokenAmounts Array of desired amounts of takerToken to fill in orders.
/// @param shouldThrowOnInsufficientBalanceOrAllowance Test if transfers will fail before attempting.
/// @param v Array ECDSA signature v parameters.
/// @param r Array of ECDSA signature r parameters.
/// @param s Array of ECDSA signature s parameters.
function batchFillOrders(
address[5][] orderAddresses,
uint[6][] orderValues,
uint[] fillTakerTokenAmounts,
bool shouldThrowOnInsufficientBalanceOrAllowance,
uint8[] v,
bytes32[] r,
bytes32[] s)
public
{
for (uint i = 0; i < orderAddresses.length; i++) {
fillOrder(
orderAddresses[i],
orderValues[i],
fillTakerTokenAmounts[i],
shouldThrowOnInsufficientBalanceOrAllowance,
v[i],
r[i],
s[i]
);
}
}
/// @dev Synchronously executes multiple fillOrKill orders in a single transaction.
/// @param orderAddresses Array of address arrays containing individual order addresses.
/// @param orderValues Array of uint arrays containing individual order values.
/// @param fillTakerTokenAmounts Array of desired amounts of takerToken to fill in orders.
/// @param v Array ECDSA signature v parameters.
/// @param r Array of ECDSA signature r parameters.
/// @param s Array of ECDSA signature s parameters.
function batchFillOrKillOrders(
address[5][] orderAddresses,
uint[6][] orderValues,
uint[] fillTakerTokenAmounts,
uint8[] v,
bytes32[] r,
bytes32[] s)
public
{
for (uint i = 0; i < orderAddresses.length; i++) {
fillOrKillOrder(
orderAddresses[i],
orderValues[i],
fillTakerTokenAmounts[i],
v[i],
r[i],
s[i]
);
}
}
/// @dev Synchronously executes multiple fill orders in a single transaction until total fillTakerTokenAmount filled.
/// @param orderAddresses Array of address arrays containing individual order addresses.
/// @param orderValues Array of uint arrays containing individual order values.
/// @param fillTakerTokenAmount Desired total amount of takerToken to fill in orders.
/// @param shouldThrowOnInsufficientBalanceOrAllowance Test if transfers will fail before attempting.
/// @param v Array ECDSA signature v parameters.
/// @param r Array of ECDSA signature r parameters.
/// @param s Array of ECDSA signature s parameters.
/// @return Total amount of fillTakerTokenAmount filled in orders.
function fillOrdersUpTo(
address[5][] orderAddresses,
uint[6][] orderValues,
uint fillTakerTokenAmount,
bool shouldThrowOnInsufficientBalanceOrAllowance,
uint8[] v,
bytes32[] r,
bytes32[] s)
public
returns (uint)
{
uint filledTakerTokenAmount = 0;
for (uint i = 0; i < orderAddresses.length; i++) {
require(orderAddresses[i][3] == orderAddresses[0][3]); // takerToken must be the same for each order
filledTakerTokenAmount = safeAdd(filledTakerTokenAmount, fillOrder(
orderAddresses[i],
orderValues[i],
safeSub(fillTakerTokenAmount, filledTakerTokenAmount),
shouldThrowOnInsufficientBalanceOrAllowance,
v[i],
r[i],
s[i]
));
if (filledTakerTokenAmount == fillTakerTokenAmount) break;
}
return filledTakerTokenAmount;
}
/// @dev Synchronously cancels multiple orders in a single transaction.
/// @param orderAddresses Array of address arrays containing individual order addresses.
/// @param orderValues Array of uint arrays containing individual order values.
/// @param cancelTakerTokenAmounts Array of desired amounts of takerToken to cancel in orders.
function batchCancelOrders(
address[5][] orderAddresses,
uint[6][] orderValues,
uint[] cancelTakerTokenAmounts)
public
{
for (uint i = 0; i < orderAddresses.length; i++) {
cancelOrder(
orderAddresses[i],
orderValues[i],
cancelTakerTokenAmounts[i]
);
}
}
/*
* Constant public functions
*/
/// @dev Calculates Keccak-256 hash of order with specified parameters.
/// @param orderAddresses Array of order's maker, taker, makerToken, takerToken, and feeRecipient.
/// @param orderValues Array of order's makerTokenAmount, takerTokenAmount, makerFee, takerFee, expirationTimestampInSec, and salt.
/// @return Keccak-256 hash of order.
function getOrderHash(address[5] orderAddresses, uint[6] orderValues)
public
constant
returns (bytes32)
{
return keccak256(
address(this),
orderAddresses[0], // maker
orderAddresses[1], // taker
orderAddresses[2], // makerToken
orderAddresses[3], // takerToken
orderAddresses[4], // feeRecipient
orderValues[0], // makerTokenAmount
orderValues[1], // takerTokenAmount
orderValues[2], // makerFee
orderValues[3], // takerFee
orderValues[4], // expirationTimestampInSec
orderValues[5] // salt
);
}
/// @dev Verifies that an order signature is valid.
/// @param signer address of signer.
/// @param hash Signed Keccak-256 hash.
/// @param v ECDSA signature parameter v.
/// @param r ECDSA signature parameters r.
/// @param s ECDSA signature parameters s.
/// @return Validity of order signature.
function isValidSignature(
address signer,
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s)
public
constant
returns (bool)
{
return signer == ecrecover(
keccak256("\x19Ethereum Signed Message:\n32", hash),
v,
r,
s
);
}
/// @dev Checks if rounding error > 0.1%.
/// @param numerator Numerator.
/// @param denominator Denominator.
/// @param target Value to multiply with numerator/denominator.
/// @return Rounding error is present.
function isRoundingError(uint numerator, uint denominator, uint target)
public
constant
returns (bool)
{
uint remainder = mulmod(target, numerator, denominator);
if (remainder == 0) return false; // No rounding error.
uint errPercentageTimes1000000 = safeDiv(
safeMul(remainder, 1000000),
safeMul(numerator, target)
);
return errPercentageTimes1000000 > 1000;
}
/// @dev Calculates partial value given a numerator and denominator.
/// @param numerator Numerator.
/// @param denominator Denominator.
/// @param target Value to calculate partial of.
/// @return Partial value of target.
function getPartialAmount(uint numerator, uint denominator, uint target)
public
constant
returns (uint)
{
return safeDiv(safeMul(numerator, target), denominator);
}
/// @dev Calculates the sum of values already filled and cancelled for a given order.
/// @param orderHash The Keccak-256 hash of the given order.
/// @return Sum of values already filled and cancelled.
function getUnavailableTakerTokenAmount(bytes32 orderHash)
public
constant
returns (uint)
{
return safeAdd(filled[orderHash], cancelled[orderHash]);
}
/*
* Internal functions
*/
/// @dev Transfers a token using TokenTransferProxy transferFrom function.
/// @param token Address of token to transferFrom.
/// @param from Address transfering token.
/// @param to Address receiving token.
/// @param value Amount of token to transfer.
/// @return Success of token transfer.
function transferViaTokenTransferProxy(
address token,
address from,
address to,
uint value)
internal
returns (bool)
{
return TokenTransferProxy(TOKEN_TRANSFER_PROXY_CONTRACT).transferFrom(token, from, to, value);
}
/// @dev Checks if any order transfers will fail.
/// @param order Order struct of params that will be checked.
/// @param fillTakerTokenAmount Desired amount of takerToken to fill.
/// @return Predicted result of transfers.
function isTransferable(Order order, uint fillTakerTokenAmount)
internal
constant // The called token contracts may attempt to change state, but will not be able to due to gas limits on getBalance and getAllowance.
returns (bool)
{
address taker = msg.sender;
uint fillMakerTokenAmount = getPartialAmount(fillTakerTokenAmount, order.takerTokenAmount, order.makerTokenAmount);
if (order.feeRecipient != address(0)) {
bool isMakerTokenZRX = order.makerToken == ZRX_TOKEN_CONTRACT;
bool isTakerTokenZRX = order.takerToken == ZRX_TOKEN_CONTRACT;
uint paidMakerFee = getPartialAmount(fillTakerTokenAmount, order.takerTokenAmount, order.makerFee);
uint paidTakerFee = getPartialAmount(fillTakerTokenAmount, order.takerTokenAmount, order.takerFee);
uint requiredMakerZRX = isMakerTokenZRX ? safeAdd(fillMakerTokenAmount, paidMakerFee) : paidMakerFee;
uint requiredTakerZRX = isTakerTokenZRX ? safeAdd(fillTakerTokenAmount, paidTakerFee) : paidTakerFee;
if ( getBalance(ZRX_TOKEN_CONTRACT, order.maker) < requiredMakerZRX
|| getAllowance(ZRX_TOKEN_CONTRACT, order.maker) < requiredMakerZRX
|| getBalance(ZRX_TOKEN_CONTRACT, taker) < requiredTakerZRX
|| getAllowance(ZRX_TOKEN_CONTRACT, taker) < requiredTakerZRX
) return false;
if (!isMakerTokenZRX && ( getBalance(order.makerToken, order.maker) < fillMakerTokenAmount // Don't double check makerToken if ZRX
|| getAllowance(order.makerToken, order.maker) < fillMakerTokenAmount)
) return false;
if (!isTakerTokenZRX && ( getBalance(order.takerToken, taker) < fillTakerTokenAmount // Don't double check takerToken if ZRX
|| getAllowance(order.takerToken, taker) < fillTakerTokenAmount)
) return false;
} else if ( getBalance(order.makerToken, order.maker) < fillMakerTokenAmount
|| getAllowance(order.makerToken, order.maker) < fillMakerTokenAmount
|| getBalance(order.takerToken, taker) < fillTakerTokenAmount
|| getAllowance(order.takerToken, taker) < fillTakerTokenAmount
) return false;
return true;
}
/// @dev Get token balance of an address.
/// @param token Address of token.
/// @param owner Address of owner.
/// @return Token balance of owner.
function getBalance(address token, address owner)
internal
constant // The called token contract may attempt to change state, but will not be able to due to an added gas limit.
returns (uint)
{
return Token(token).balanceOf.gas(EXTERNAL_QUERY_GAS_LIMIT)(owner); // Limit gas to prevent reentrancy
}
/// @dev Get allowance of token given to TokenTransferProxy by an address.
/// @param token Address of token.
/// @param owner Address of owner.
/// @return Allowance of token given to TokenTransferProxy by owner.
function getAllowance(address token, address owner)
internal
constant // The called token contract may attempt to change state, but will not be able to due to an added gas limit.
returns (uint)
{
return Token(token).allowance.gas(EXTERNAL_QUERY_GAS_LIMIT)(owner, TOKEN_TRANSFER_PROXY_CONTRACT); // Limit gas to prevent reentrancy
}
} | True | [
101,
1013,
1008,
9385,
2418,
5717,
10288,
20014,
2140,
1012,
7000,
2104,
1996,
15895,
6105,
1010,
2544,
1016,
1012,
1014,
1006,
1996,
1000,
6105,
1000,
1007,
1025,
2017,
2089,
2025,
2224,
2023,
5371,
3272,
1999,
12646,
2007,
1996,
6105,
1012,
2017,
2089,
6855,
1037,
6100,
1997,
1996,
6105,
2012,
8299,
1024,
1013,
1013,
7479,
1012,
15895,
1012,
8917,
1013,
15943,
1013,
6105,
1011,
1016,
1012,
1014,
4983,
3223,
2011,
12711,
2375,
2030,
3530,
2000,
1999,
3015,
1010,
4007,
5500,
2104,
1996,
6105,
2003,
5500,
2006,
2019,
1000,
2004,
2003,
1000,
3978,
1010,
2302,
10943,
3111,
2030,
3785,
1997,
2151,
2785,
1010,
2593,
4671,
2030,
13339,
1012,
2156,
1996,
6105,
2005,
1996,
3563,
2653,
8677,
6656,
2015,
1998,
12546,
2104,
1996,
6105,
1012,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1018,
1012,
2403,
1025,
1013,
1008,
1008,
2219,
3085,
1008,
1008,
2918,
3206,
2007,
2019,
3954,
1012,
1008,
3640,
2069,
12384,
2121,
16913,
18095,
1010,
2029,
16263,
3853,
2013,
2770,
2065,
2009,
2003,
2170,
2011,
3087,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2270,
3954,
1025,
3853,
2219,
3085,
1006,
1007,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
2047,
12384,
2121,
1007,
2069,
12384,
2121,
1063,
2065,
1006,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1063,
3954,
1027,
2047,
12384,
2121,
1025,
1065,
1065,
1065,
3206,
19204,
1063,
1013,
1013,
1013,
1030,
2709,
2561,
3815,
1997,
19204,
2015,
3853,
21948,
6279,
22086,
1006,
1007,
5377,
5651,
1006,
21318,
3372,
4425,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3954,
1996,
4769,
2013,
2029,
1996,
5703,
2097,
2022,
5140,
1013,
1013,
1013,
1030,
2709,
1996,
5703,
3853,
5703,
11253,
1006,
4769,
1035,
3954,
1007,
5377,
5651,
1006,
21318,
3372,
5703,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
1006,
4769,
1035,
2000,
1010,
21318,
3372,
1035,
3643,
1007,
5651,
1006,
22017,
2140,
3112,
1007,
1063,
1065,
1013,
1013,
1013,
1030,
5060,
4604,
1036,
1035,
3643,
1036,
19204,
2000,
1036,
1035,
2000,
1036,
2013,
1036,
1035,
2013,
1036,
2006,
1996,
4650,
2009,
2003,
4844,
2011,
1036,
1035,
2013,
1036,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2013,
1996,
4769,
1997,
1996,
4604,
2121,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
2000,
1996,
4769,
1997,
1996,
7799,
1013,
1013,
1013,
1030,
11498,
2213,
1035,
3643,
1996,
3815,
1997,
19204,
2000,
2022,
4015,
1013,
1013,
1013,
1030,
2709,
3251,
1996,
4651,
2001,
3144,
2030,
2025,
3853,
4651,
19699,
5358,
1006,
4769,
1035,
2013,
1010,
4769,
1035,
2000,
1010,
21318,
3372,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2020-11-15
*/
pragma solidity ^0.6.0;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract JFCOIN is Context, IERC20, Owned {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
constructor () public {
_name = "JFCOIN";
_symbol = "JF";
_decimals = 18;
_totalSupply = 1000 * 10**18;
_balances[owner] = _balances[owner].add(_totalSupply);
emit Transfer(address(0), owner, _totalSupply);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
12609,
1011,
2340,
1011,
2321,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
1014,
1025,
8278,
29464,
11890,
11387,
1063,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
3853,
4651,
19699,
5358,
1006,
4769,
4604,
2121,
1010,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
2724,
4651,
1006,
4769,
25331,
2013,
1010,
4769,
25331,
2000,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
2724,
6226,
1006,
4769,
25331,
3954,
1010,
4769,
25331,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3643,
1007,
1025,
1065,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
3206,
3079,
1063,
4769,
2270,
3954,
1025,
4769,
2270,
2047,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
1035,
2013,
1010,
4769,
25331,
1035,
2000,
1007,
1025,
9570,
2953,
1006,
1007,
2270,
1063,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
16913,
18095,
2069,
12384,
2121,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
3954,
1007,
1025,
1035,
1025,
1065,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
2047,
12384,
2121,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
3853,
5138,
12384,
2545,
5605,
1006,
1007,
2270,
1063,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
2047,
12384,
2121,
1007,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
3954,
1010,
2047,
12384,
2121,
1007,
1025,
3954,
1027,
2047,
12384,
2121,
1025,
2047,
12384,
2121,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
1065,
3075,
3647,
18900,
2232,
1063,
3853,
5587,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1063,
21318,
3372,
17788,
2575,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1010,
1000,
3647,
18900,
2232,
1024,
2804,
2058,
12314,
1000,
1007,
1025,
2709,
1039,
1025,
1065,
3853,
4942,
1006,
21318,
3372,
17788,
2575,
1037,
1010,
21318,
3372,
17788,
2575,
1038,
1007,
4722,
5760,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-04-08
*/
/// SPDX-License-Identifier: MIT
/*
▄▄█ ▄ ██ █▄▄▄▄ ▄█
██ █ █ █ █ ▄▀ ██
██ ██ █ █▄▄█ █▀▀▌ ██
▐█ █ █ █ █ █ █ █ ▐█
▐ █ █ █ █ █ ▐
█ ██ █ ▀
▀ */
/// Special thanks to Keno and Boring for reviewing early bridge patterns.
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
/// @notice Interface for depositing into and withdrawing from SushiBar.
interface ISushiBarBridge {
function enter(uint256 amount) external;
function leave(uint256 share) external;
}
/// @notice Interface for depositing into and withdrawing from Aave lending pool.
interface IAaveBridge {
function UNDERLYING_ASSET_ADDRESS() external view returns (address);
function deposit(
address asset,
uint256 amount,
address onBehalfOf,
uint16 referralCode
) external;
function withdraw(
address token,
uint256 amount,
address destination
) external;
}
/// @notice Interface for depositing into and withdrawing from BentoBox vault.
interface IBentoBridge {
function registerProtocol() external;
function deposit(
IERC20 token_,
address from,
address to,
uint256 amount,
uint256 share
) external payable returns (uint256 amountOut, uint256 shareOut);
function withdraw(
IERC20 token_,
address from,
address to,
uint256 amount,
uint256 share
) external returns (uint256 amountOut, uint256 shareOut);
}
/// @notice Interface for depositing into and withdrawing from Compound finance protocol.
interface ICompoundBridge {
function underlying() external view returns (address);
function mint(uint mintAmount) external returns (uint);
function redeem(uint redeemTokens) external returns (uint);
}
/// @notice Interface for Dai Stablecoin (DAI) `permit()` primitive.
interface IDaiPermit {
function permit(
address holder,
address spender,
uint256 nonce,
uint256 expiry,
bool allowed,
uint8 v,
bytes32 r,
bytes32 s
) external;
}
// File @boringcrypto/boring-solidity/contracts/interfaces/[email protected]
/// License-Identifier: MIT
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
/// @notice EIP 2612
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
}
// File @boringcrypto/boring-solidity/contracts/libraries/[email protected]
/// License-Identifier: MIT
library BoringERC20 {
bytes4 private constant SIG_SYMBOL = 0x95d89b41; // symbol()
bytes4 private constant SIG_NAME = 0x06fdde03; // name()
bytes4 private constant SIG_DECIMALS = 0x313ce567; // decimals()
bytes4 private constant SIG_TRANSFER = 0xa9059cbb; // transfer(address,uint256)
bytes4 private constant SIG_TRANSFER_FROM = 0x23b872dd; // transferFrom(address,address,uint256)
/// @notice Provides a safe ERC20.transfer version for different ERC-20 implementations.
/// Reverts on a failed transfer.
/// @param token The address of the ERC-20 token.
/// @param to Transfer tokens to.
/// @param amount The token amount.
function safeTransfer(
IERC20 token,
address to,
uint256 amount
) internal {
(bool success, bytes memory data) = address(token).call(abi.encodeWithSelector(SIG_TRANSFER, to, amount));
require(success && (data.length == 0 || abi.decode(data, (bool))), "BoringERC20: Transfer failed");
}
/// @notice Provides a safe ERC20.transferFrom version for different ERC-20 implementations.
/// Reverts on a failed transfer.
/// @param token The address of the ERC-20 token.
/// @param from Transfer tokens from.
/// @param to Transfer tokens to.
/// @param amount The token amount.
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 amount
) internal {
(bool success, bytes memory data) = address(token).call(abi.encodeWithSelector(SIG_TRANSFER_FROM, from, to, amount));
require(success && (data.length == 0 || abi.decode(data, (bool))), "BoringERC20: TransferFrom failed");
}
}
// File @boringcrypto/boring-solidity/contracts/[email protected]
/// License-Identifier: MIT
contract BaseBoringBatchable {
/// @dev Helper function to extract a useful revert message from a failed call.
/// If the returned data is malformed or not correctly abi encoded then this call can fail itself.
function _getRevertMsg(bytes memory _returnData) internal pure returns (string memory) {
// If the _res length is less than 68, then the transaction failed silently (without a revert message)
if (_returnData.length < 68) return "Transaction reverted silently";
assembly {
// Slice the sighash.
_returnData := add(_returnData, 0x04)
}
return abi.decode(_returnData, (string)); // All that remains is the revert string
}
/// @notice Allows batched call to self (this contract).
/// @param calls An array of inputs for each call.
/// @param revertOnFail If True then reverts after a failed call and stops doing further calls.
/// @return successes An array indicating the success of a call, mapped one-to-one to `calls`.
/// @return results An array with the returned data of each function call, mapped one-to-one to `calls`.
// F1: External is ok here because this is the batch function, adding it to a batch makes no sense
// F2: Calls in the batch may be payable, delegatecall operates in the same context, so each call in the batch has access to msg.value
// C3: The length of the loop is fully under user control, so can't be exploited
// C7: Delegatecall is only used on the same contract, so it's safe
function batch(bytes[] calldata calls, bool revertOnFail) external payable returns (bool[] memory successes, bytes[] memory results) {
successes = new bool[](calls.length);
results = new bytes[](calls.length);
for (uint256 i = 0; i < calls.length; i++) {
(bool success, bytes memory result) = address(this).delegatecall(calls[i]);
require(success || !revertOnFail, _getRevertMsg(result));
successes[i] = success;
results[i] = result;
}
}
}
contract BoringBatchable is BaseBoringBatchable {
/// @notice Call wrapper that performs `ERC20.permit` on `token`.
/// Lookup `IERC20.permit`.
// F6: Parameters can be used front-run the permit and the user's permit will fail (due to nonce or other revert)
// if part of a batch this could be used to grief once as the second call would not need the permit
function permitToken(
IERC20 token,
address from,
address to,
uint256 amount,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public {
token.permit(from, to, amount, deadline, v, r, s);
}
}
/// @notice Contract that batches SUSHI staking and DeFi strategies.
contract Inari is BoringBatchable {
using BoringERC20 for IERC20;
IERC20 constant sushiToken = IERC20(0x6B3595068778DD592e39A122f4f5a5cF09C90fE2); // SUSHI token contract
address constant sushiBar = 0x8798249c2E607446EfB7Ad49eC89dD1865Ff4272; // xSUSHI staking contract for SUSHI
IAaveBridge constant aave = IAaveBridge(0x7d2768dE32b0b80b7a3454c06BdAc94A69DDc7A9); // AAVE lending pool contract for xSUSHI staking into aXSUSHI
IERC20 constant aaveSushiToken = IERC20(0xF256CC7847E919FAc9B808cC216cAc87CCF2f47a); // aXSUSHI staking contract for xSUSHI
IBentoBridge constant bento = IBentoBridge(0xF5BCE5077908a1b7370B9ae04AdC565EBd643966); // BENTO vault contract
address constant crSushiToken = 0x338286C0BC081891A4Bda39C7667ae150bf5D206; // crSUSHI staking contract for SUSHI
address constant crXSushiToken = 0x228619CCa194Fbe3Ebeb2f835eC1eA5080DaFbb2; // crXSUSHI staking contract for xSUSHI
address constant dai = 0x6B175474E89094C44Da98b954EedeAC495271d0F; // DAI token contract
/// @notice Initialize this Inari contract and core SUSHI strategies.
constructor() public {
bento.registerProtocol(); // register this contract with BENTO
sushiToken.approve(address(sushiBar), type(uint256).max); // max approve `sushiBar` spender to stake SUSHI into xSUSHI from this contract
sushiToken.approve(crSushiToken, type(uint256).max); // max approve `crSushiToken` spender to stake SUSHI into crSUSHI from this contract
IERC20(sushiBar).approve(address(aave), type(uint256).max); // max approve `aave` spender to stake xSUSHI into aXSUSHI from this contract
IERC20(sushiBar).approve(address(bento), type(uint256).max); // max approve `bento` spender to stake xSUSHI into BENTO from this contract
IERC20(sushiBar).approve(crXSushiToken, type(uint256).max); // max approve `crXSushiToken` spender to stake xSUSHI into crXSUSHI from this contract
IERC20(dai).approve(address(bento), type(uint256).max); // max approve `bento` spender to pull DAI into BENTO from this contract
}
/// @notice Helper function to approve this contract to spend and bridge more tokens among DeFi contracts.
function approveTokenBridge(IERC20[] calldata underlying, address[] calldata cToken) external {
for (uint256 i = 0; i < underlying.length; i++) {
underlying[i].approve(address(aave), type(uint256).max); // max approve `aave` spender to pull `underlying` from this contract
underlying[i].approve(address(bento), type(uint256).max); // max approve `bento` spender to pull `underlying` from this contract
underlying[i].approve(cToken[i], type(uint256).max); // max approve `cToken` spender to pull `underlying` from this contract
}
}
/*
██ ██ ▄ ▄███▄
█ █ █ █ █ █▀ ▀
█▄▄█ █▄▄█ █ █ ██▄▄
█ █ █ █ █ █ █▄ ▄▀
█ █ █ █ ▀███▀
█ █ █▐
▀ ▀ ▐ */
/**************************
AAVE -> UNDERLYING -> BENTO
**************************/
/// @notice Migrate AAVE `aToken` underlying `amount` into BENTO by batching calls to `aave` and `bento`.
function aaveToBento(address aToken, uint256 amount) external {
IERC20(aToken).safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` `aToken` `amount` into this contract
address underlying = IAaveBridge(aToken).UNDERLYING_ASSET_ADDRESS(); // sanity check for `underlying` token
aave.withdraw(underlying, amount, address(this)); // burn deposited `aToken` from `aave` into `underlying`
bento.deposit(IERC20(underlying), address(this), msg.sender, amount, 0); // stake `underlying` into BENTO for `msg.sender`
}
/// @notice Migrate AAVE `aToken` underlying `amount` into BENTO for benefit of `to` by batching calls to `aave` and `bento`.
function aaveToBentoTo(address aToken, address to, uint256 amount) external {
IERC20(aToken).safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` `aToken` `amount` into this contract
address underlying = IAaveBridge(aToken).UNDERLYING_ASSET_ADDRESS(); // sanity check for `underlying` token
aave.withdraw(underlying, amount, address(this)); // burn deposited `aToken` from `aave` into `underlying`
bento.deposit(IERC20(underlying), address(this), to, amount, 0); // stake `underlying` into BENTO for `to`
}
/**************************
BENTO -> UNDERLYING -> AAVE
**************************/
/// @notice Migrate `underlying` `amount` from BENTO into AAVE by batching calls to `bento` and `aave`.
function bentoToAave(IERC20 underlying, uint256 amount) external {
bento.withdraw(underlying, msg.sender, address(this), amount, 0); // withdraw `amount` of `underlying` from BENTO into this contract
aave.deposit(address(underlying), amount, msg.sender, 0); // stake `underlying` into `aave` for `msg.sender`
}
/// @notice Migrate `underlying` `amount` from BENTO into AAVE for benefit of `to` by batching calls to `bento` and `aave`.
function bentoToAaveTo(IERC20 underlying, address to, uint256 amount) external {
bento.withdraw(underlying, msg.sender, address(this), amount, 0); // withdraw `amount` of `underlying` from BENTO into this contract
aave.deposit(address(underlying), amount, to, 0); // stake `underlying` into `aave` for `to`
}
/**********************
SUSHI -> XSUSHI -> AAVE
**********************/
/// @notice Stake SUSHI `amount` into aXSUSHI by batching calls to `sushiBar` and `aave`.
function stakeSushiToAave(uint256 amount) external {
sushiToken.safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` SUSHI `amount` into this contract
ISushiBarBridge(sushiBar).enter(amount); // stake deposited SUSHI into `sushiBar` xSUSHI
aave.deposit(sushiBar, IERC20(sushiBar).balanceOf(address(this)), msg.sender, 0); // stake resulting xSUSHI into `aave` aXSUSHI for `msg.sender`
}
/// @notice Stake SUSHI `amount` into aXSUSHI for benefit of `to` by batching calls to `sushiBar` and `aave`.
function stakeSushiToAaveTo(address to, uint256 amount) external {
sushiToken.safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` SUSHI `amount` into this contract
ISushiBarBridge(sushiBar).enter(amount); // stake deposited SUSHI into `sushiBar` xSUSHI
aave.deposit(sushiBar, IERC20(sushiBar).balanceOf(address(this)), to, 0); // stake resulting xSUSHI into `aave` aXSUSHI for `to`
}
/**********************
AAVE -> XSUSHI -> SUSHI
**********************/
/// @notice Unstake aXSUSHI `amount` into SUSHI by batching calls to `aave` and `sushiBar`.
function unstakeSushiFromAave(uint256 amount) external {
aaveSushiToken.safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` aXSUSHI `amount` into this contract
aave.withdraw(sushiBar, amount, address(this)); // burn deposited aXSUSHI from `aave` into xSUSHI
ISushiBarBridge(sushiBar).leave(amount); // burn resulting xSUSHI from `sushiBar` into SUSHI
sushiToken.safeTransfer(msg.sender, sushiToken.balanceOf(address(this))); // transfer resulting SUSHI to `msg.sender`
}
/// @notice Unstake aXSUSHI `amount` into SUSHI for benefit of `to` by batching calls to `aave` and `sushiBar`.
function unstakeSushiFromAaveTo(address to, uint256 amount) external {
aaveSushiToken.safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` aXSUSHI `amount` into this contract
aave.withdraw(sushiBar, amount, address(this)); // burn deposited aXSUSHI from `aave` into xSUSHI
ISushiBarBridge(sushiBar).leave(amount); // burn resulting xSUSHI from `sushiBar` into SUSHI
sushiToken.safeTransfer(to, sushiToken.balanceOf(address(this))); // transfer resulting SUSHI to `to`
}
/*
███ ▄███▄ ▄ ▄▄▄▄▀ ████▄
█ █ █▀ ▀ █ ▀▀▀ █ █ █
█ ▀ ▄ ██▄▄ ██ █ █ █ █
█ ▄▀ █▄ ▄▀ █ █ █ █ ▀████
███ ▀███▀ █ █ █ ▀
█ ██ */
/// @notice Helper function to `permit()` this contract to deposit `dai` into `bento`.
function daiToBentoWithPermit(
uint256 amount, uint256 nonce, uint256 deadline,
uint8 v, bytes32 r, bytes32 s
) external {
IDaiPermit(dai).permit(msg.sender, address(this), nonce, deadline, true, v, r, s); // `permit()` this contract to spend `msg.sender` `dai` `amount`
IERC20(dai).safeTransferFrom(msg.sender, address(this), amount); // pull `dai` `amount` into this contract
bento.deposit(IERC20(dai), address(this), msg.sender, amount, 0); // stake `dai` into BENTO for `msg.sender`
}
/***********************
SUSHI -> XSUSHI -> BENTO
***********************/
/// @notice Stake SUSHI `amount` into BENTO xSUSHI by batching calls to `sushiBar` and `bento`.
function stakeSushiToBento(uint256 amount) external {
sushiToken.safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` SUSHI `amount` into this contract
ISushiBarBridge(sushiBar).enter(amount); // stake deposited SUSHI into `sushiBar` xSUSHI
bento.deposit(IERC20(sushiBar), address(this), msg.sender, IERC20(sushiBar).balanceOf(address(this)), 0); // stake resulting xSUSHI into BENTO for `msg.sender`
}
/// @notice Stake SUSHI `amount` into BENTO xSUSHI for benefit of `to` by batching calls to `sushiBar` and `bento`.
function stakeSushiToBentoTo(address to, uint256 amount) external {
sushiToken.safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` SUSHI `amount` into this contract
ISushiBarBridge(sushiBar).enter(amount); // stake deposited SUSHI into `sushiBar` xSUSHI
bento.deposit(IERC20(sushiBar), address(this), to, IERC20(sushiBar).balanceOf(address(this)), 0); // stake resulting xSUSHI into BENTO for `to`
}
/***********************
BENTO -> XSUSHI -> SUSHI
***********************/
/// @notice Unstake xSUSHI `amount` from BENTO into SUSHI by batching calls to `bento` and `sushiBar`.
function unstakeSushiFromBento(uint256 amount) external {
bento.withdraw(IERC20(sushiBar), msg.sender, address(this), amount, 0); // withdraw `amount` of xSUSHI from BENTO into this contract
ISushiBarBridge(sushiBar).leave(amount); // burn withdrawn xSUSHI from `sushiBar` into SUSHI
sushiToken.safeTransfer(msg.sender, sushiToken.balanceOf(address(this))); // transfer resulting SUSHI to `msg.sender`
}
/// @notice Unstake xSUSHI `amount` from BENTO into SUSHI for benefit of `to` by batching calls to `bento` and `sushiBar`.
function unstakeSushiFromBentoTo(address to, uint256 amount) external {
bento.withdraw(IERC20(sushiBar), msg.sender, address(this), amount, 0); // withdraw `amount` of xSUSHI from BENTO into this contract
ISushiBarBridge(sushiBar).leave(amount); // burn withdrawn xSUSHI from `sushiBar` into SUSHI
sushiToken.safeTransfer(to, sushiToken.balanceOf(address(this))); // transfer resulting SUSHI to `to`
}
/*
▄█▄ █▄▄▄▄ ▄███▄ ██ █▀▄▀█
█▀ ▀▄ █ ▄▀ █▀ ▀ █ █ █ █ █
█ ▀ █▀▀▌ ██▄▄ █▄▄█ █ ▄ █
█▄ ▄▀ █ █ █▄ ▄▀ █ █ █ █
▀███▀ █ ▀███▀ █ █
▀ █ ▀
▀ */
// - COMPOUND - //
/**************************
COMP -> UNDERLYING -> BENTO
**************************/
/// @notice Migrate COMP/CREAM `cToken` underlying `amount` into BENTO by batching calls to `cToken` and `bento`.
function compoundToBento(address cToken, uint256 cTokenAmount) external {
IERC20(cToken).safeTransferFrom(msg.sender, address(this), cTokenAmount); // deposit `msg.sender` `cToken` `cTokenAmount` into this contract
ICompoundBridge(cToken).redeem(cTokenAmount); // burn deposited `cToken` into `underlying`
IERC20 underlying = IERC20(ICompoundBridge(cToken).underlying()); // sanity check for `underlying` token
bento.deposit(underlying, address(this), msg.sender, underlying.balanceOf(address(this)), 0); // stake resulting `underlying` into BENTO for `msg.sender`
}
/// @notice Migrate COMP/CREAM `cToken` underlying `amount` into BENTO for benefit of `to` by batching calls to `cToken` and `bento`.
function compoundToBentoTo(address cToken, address to, uint256 cTokenAmount) external {
IERC20(cToken).safeTransferFrom(msg.sender, address(this), cTokenAmount); // deposit `msg.sender` `cToken` `cTokenAmount` into this contract
ICompoundBridge(cToken).redeem(cTokenAmount); // burn deposited `cToken` into `underlying`
IERC20 underlying = IERC20(ICompoundBridge(cToken).underlying()); // sanity check for `underlying` token
bento.deposit(underlying, address(this), to, underlying.balanceOf(address(this)), 0); // stake resulting `underlying` into BENTO for `to`
}
/**************************
BENTO -> UNDERLYING -> COMP
**************************/
/// @notice Migrate `cToken` `underlyingAmount` from BENTO into COMP/CREAM by batching calls to `bento` and `cToken`.
function bentoToCompound(address cToken, uint256 underlyingAmount) external {
IERC20 underlying = IERC20(ICompoundBridge(cToken).underlying()); // sanity check for `underlying` token
bento.withdraw(underlying, msg.sender, address(this), underlyingAmount, 0); // withdraw `underlyingAmount` of `underlying` from BENTO into this contract
ICompoundBridge(cToken).mint(underlyingAmount); // stake `underlying` into `cToken`
IERC20(cToken).safeTransfer(msg.sender, IERC20(cToken).balanceOf(address(this))); // transfer resulting `cToken` to `msg.sender`
}
/// @notice Migrate `cToken` `underlyingAmount` from BENTO into COMP/CREAM for benefit of `to` by batching calls to `bento` and `cToken`.
function bentoToCompoundTo(address cToken, address to, uint256 underlyingAmount) external {
IERC20 underlying = IERC20(ICompoundBridge(cToken).underlying()); // sanity check for `underlying` token
bento.withdraw(underlying, msg.sender, address(this), underlyingAmount, 0); // withdraw `underlyingAmount` of `underlying` from BENTO into this contract
ICompoundBridge(cToken).mint(underlyingAmount); // stake `underlying` into `cToken`
IERC20(cToken).safeTransfer(to, IERC20(cToken).balanceOf(address(this))); // transfer resulting `cToken` to `to`
}
/**********************
SUSHI -> CREAM -> BENTO
**********************/
/// @notice Stake SUSHI `amount` into crSUSHI and BENTO by batching calls to `crSushiToken` and `bento`.
function sushiToCreamToBento(uint256 amount) external {
sushiToken.safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` SUSHI `amount` into this contract
ICompoundBridge(crSushiToken).mint(amount); // stake deposited SUSHI into crSUSHI
bento.deposit(IERC20(crSushiToken), address(this), msg.sender, IERC20(crSushiToken).balanceOf(address(this)), 0); // stake resulting crSUSHI into BENTO for `msg.sender`
}
/// @notice Stake SUSHI `amount` into crSUSHI and BENTO for benefit of `to` by batching calls to `crSushiToken` and `bento`.
function sushiToCreamToBentoTo(address to, uint256 amount) external {
sushiToken.safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` SUSHI `amount` into this contract
ICompoundBridge(crSushiToken).mint(amount); // stake deposited SUSHI into crSUSHI
bento.deposit(IERC20(crSushiToken), address(this), to, IERC20(crSushiToken).balanceOf(address(this)), 0); // stake resulting crSUSHI into BENTO for `to`
}
/**********************
BENTO -> CREAM -> SUSHI
**********************/
/// @notice Unstake crSUSHI `amount` into SUSHI from BENTO by batching calls to `bento` and `crSushiToken`.
function sushiFromCreamFromBento(uint256 amount) external {
bento.withdraw(IERC20(crSushiToken), msg.sender, address(this), amount, 0); // withdraw `amount` of `crSushiToken` from BENTO into this contract
ICompoundBridge(crSushiToken).redeem(amount); // burn deposited `crSushiToken` into SUSHI
sushiToken.safeTransfer(msg.sender, sushiToken.balanceOf(address(this))); // transfer resulting SUSHI to `msg.sender`
}
/// @notice Unstake crSUSHI `amount` into SUSHI from BENTO for benefit of `to` by batching calls to `bento` and `crSushiToken`.
function sushiFromCreamFromBentoTo(address to, uint256 amount) external {
bento.withdraw(IERC20(crSushiToken), msg.sender, address(this), amount, 0); // withdraw `amount` of `crSushiToken` from BENTO into this contract
ICompoundBridge(crSushiToken).redeem(amount); // burn deposited `crSushiToken` into SUSHI
sushiToken.safeTransfer(to, sushiToken.balanceOf(address(this))); // transfer resulting SUSHI to `to`
}
/***********************
SUSHI -> XSUSHI -> CREAM
***********************/
/// @notice Stake SUSHI `amount` into crXSUSHI by batching calls to `sushiBar` and `crXSushiToken`.
function stakeSushiToCream(uint256 amount) external {
sushiToken.safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` SUSHI `amount` into this contract
ISushiBarBridge(sushiBar).enter(amount); // stake deposited SUSHI `amount` into `sushiBar` xSUSHI
ICompoundBridge(crXSushiToken).mint(IERC20(sushiBar).balanceOf(address(this))); // stake resulting xSUSHI into crXSUSHI
IERC20(crXSushiToken).safeTransfer(msg.sender, IERC20(crXSushiToken).balanceOf(address(this))); // transfer resulting crXSUSHI to `msg.sender`
}
/// @notice Stake SUSHI `amount` into crXSUSHI for benefit of `to` by batching calls to `sushiBar` and `crXSushiToken`.
function stakeSushiToCreamTo(address to, uint256 amount) external {
sushiToken.safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` SUSHI `amount` into this contract
ISushiBarBridge(sushiBar).enter(amount); // stake deposited SUSHI `amount` into `sushiBar` xSUSHI
ICompoundBridge(crXSushiToken).mint(IERC20(sushiBar).balanceOf(address(this))); // stake resulting xSUSHI into crXSUSHI
IERC20(crXSushiToken).safeTransfer(to, IERC20(crXSushiToken).balanceOf(address(this))); // transfer resulting crXSUSHI to `to`
}
/***********************
CREAM -> XSUSHI -> SUSHI
***********************/
/// @notice Unstake crXSUSHI `amount` into SUSHI by batching calls to `crXSushiToken` and `sushiBar`.
function unstakeSushiFromCream(uint256 amount) external {
IERC20(crXSushiToken).safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` `crXSushiToken` `amount` into this contract
ICompoundBridge(crXSushiToken).redeem(amount); // burn deposited `crXSushiToken` `amount` into xSUSHI
ISushiBarBridge(sushiBar).leave(IERC20(sushiBar).balanceOf(address(this))); // burn resulting xSUSHI `amount` from `sushiBar` into SUSHI
sushiToken.safeTransfer(msg.sender, sushiToken.balanceOf(address(this))); // transfer resulting SUSHI to `msg.sender`
}
/// @notice Unstake crXSUSHI `amount` into SUSHI for benefit of `to` by batching calls to `crXSushiToken` and `sushiBar`.
function unstakeSushiFromCreamTo(address to, uint256 amount) external {
IERC20(crXSushiToken).safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` `crXSushiToken` `amount` into this contract
ICompoundBridge(crXSushiToken).redeem(amount); // burn deposited `crXSushiToken` `amount` into xSUSHI
ISushiBarBridge(sushiBar).leave(IERC20(sushiBar).balanceOf(address(this))); // burn resulting xSUSHI `amount` from `sushiBar` into SUSHI
sushiToken.safeTransfer(to, sushiToken.balanceOf(address(this))); // transfer resulting SUSHI to `to`
}
/********************************
SUSHI -> XSUSHI -> CREAM -> BENTO
********************************/
/// @notice Stake SUSHI `amount` into crXSUSHI and BENTO by batching calls to `sushiBar`, `crXSushiToken` and `bento`.
function stakeSushiToCreamToBento(uint256 amount) external {
sushiToken.safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` SUSHI `amount` into this contract
ISushiBarBridge(sushiBar).enter(amount); // stake deposited SUSHI `amount` into `sushiBar` xSUSHI
ICompoundBridge(crXSushiToken).mint(IERC20(sushiBar).balanceOf(address(this))); // stake resulting xSUSHI into crXSUSHI
bento.deposit(IERC20(crXSushiToken), address(this), msg.sender, IERC20(crXSushiToken).balanceOf(address(this)), 0); // stake resulting crXSUSHI into BENTO for `msg.sender`
}
/// @notice Stake SUSHI `amount` into crXSUSHI and BENTO for benefit of `to` by batching calls to `sushiBar`, `crXSushiToken` and `bento`.
function stakeSushiToCreamToBentoTo(address to, uint256 amount) external {
sushiToken.safeTransferFrom(msg.sender, address(this), amount); // deposit `msg.sender` SUSHI `amount` into this contract
ISushiBarBridge(sushiBar).enter(amount); // stake deposited SUSHI `amount` into `sushiBar` xSUSHI
ICompoundBridge(crXSushiToken).mint(IERC20(sushiBar).balanceOf(address(this))); // stake resulting xSUSHI into crXSUSHI
bento.deposit(IERC20(crXSushiToken), address(this), to, IERC20(crXSushiToken).balanceOf(address(this)), 0); // stake resulting crXSUSHI into BENTO for `to`
}
/********************************
BENTO -> CREAM -> XSUSHI -> SUSHI
********************************/
/// @notice Unstake crXSUSHI `amount` into SUSHI from BENTO by batching calls to `bento`, `crXSushiToken` and `sushiBar`.
function unstakeSushiFromCreamFromBento(uint256 amount) external {
bento.withdraw(IERC20(crXSushiToken), msg.sender, address(this), amount, 0); // withdraw `amount` of `crXSushiToken` from BENTO into this contract
ICompoundBridge(crXSushiToken).redeem(amount); // burn deposited `crXSushiToken` `amount` into xSUSHI
ISushiBarBridge(sushiBar).leave(IERC20(sushiBar).balanceOf(address(this))); // burn resulting xSUSHI `amount` from `sushiBar` into SUSHI
sushiToken.safeTransfer(msg.sender, sushiToken.balanceOf(address(this))); // transfer resulting SUSHI to `msg.sender`
}
/// @notice Unstake crXSUSHI `amount` into SUSHI from BENTO for benefit of `to` by batching calls to `bento`, `crXSushiToken` and `sushiBar`.
function unstakeSushiFromCreamFromBentoTo(address to, uint256 amount) external {
bento.withdraw(IERC20(crXSushiToken), msg.sender, address(this), amount, 0); // withdraw `amount` of `crXSushiToken` from BENTO into this contract
ICompoundBridge(crXSushiToken).redeem(amount); // burn deposited `crXSushiToken` `amount` into xSUSHI
ISushiBarBridge(sushiBar).leave(IERC20(sushiBar).balanceOf(address(this))); // burn resulting xSUSHI `amount` from `sushiBar` into SUSHI
sushiToken.safeTransfer(to, sushiToken.balanceOf(address(this))); // transfer resulting SUSHI to `to`
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5840,
1011,
5511,
1008,
1013,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1008,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
100,
1008,
1013,
1013,
1013,
1013,
2569,
4283,
2000,
6358,
2080,
1998,
11771,
2005,
15252,
2220,
2958,
7060,
1012,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
10975,
8490,
2863,
6388,
11113,
9013,
16044,
2099,
2615,
2475,
1025,
1013,
1013,
1013,
1030,
5060,
8278,
2005,
12816,
2075,
2046,
1998,
21779,
2013,
10514,
6182,
8237,
1012,
8278,
2003,
20668,
26656,
6374,
1063,
3853,
4607,
1006,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
1025,
3853,
2681,
1006,
21318,
3372,
17788,
2575,
3745,
1007,
6327,
1025,
1065,
1013,
1013,
1013,
1030,
5060,
8278,
2005,
12816,
2075,
2046,
1998,
21779,
2013,
9779,
3726,
18435,
4770,
1012,
8278,
24264,
10696,
6374,
1063,
3853,
10318,
1035,
11412,
1035,
4769,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
12816,
1006,
4769,
11412,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
4769,
2006,
4783,
8865,
14876,
2546,
1010,
21318,
3372,
16048,
6523,
7941,
16044,
1007,
6327,
1025,
3853,
10632,
1006,
4769,
19204,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
4769,
7688,
1007,
6327,
1025,
1065,
1013,
1013,
1013,
1030,
5060,
8278,
2005,
12816,
2075,
2046,
1998,
21779,
2013,
6260,
16429,
11636,
11632,
1012,
8278,
21307,
4765,
16429,
9438,
1063,
3853,
4236,
21572,
3406,
25778,
1006,
1007,
6327,
1025,
3853,
12816,
1006,
29464,
11890,
11387,
19204,
1035,
1010,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
21318,
3372,
17788,
2575,
3745,
1007,
6327,
3477,
3085,
5651,
1006,
21318,
3372,
17788,
2575,
3815,
5833,
1010,
21318,
3372,
17788,
2575,
3745,
5833,
1007,
1025,
3853,
10632,
1006,
29464,
11890,
11387,
19204,
1035,
1010,
4769,
2013,
1010,
4769,
2000,
1010,
21318,
3372,
17788,
2575,
3815,
1010,
21318,
3372,
17788,
2575,
3745,
1007,
6327,
5651,
1006,
21318,
3372,
17788,
2575,
3815,
5833,
1010,
21318,
3372,
17788,
2575,
3745,
5833,
1007,
1025,
1065,
1013,
1013,
1013,
1030,
5060,
8278,
2005,
12816,
2075,
2046,
1998,
21779,
2013,
7328,
5446,
8778,
1012,
8278,
24582,
25377,
28819,
6374,
1063,
3853,
10318,
1006,
1007,
6327,
3193,
5651,
1006,
4769,
1007,
1025,
3853,
12927,
1006,
21318,
3372,
12927,
22591,
16671,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
3853,
2417,
21564,
1006,
21318,
3372,
2417,
21564,
18715,
6132,
1007,
6327,
5651,
1006,
21318,
3372,
1007,
1025,
1065,
1013,
1013,
1013,
1030,
5060,
8278,
2005,
18765,
6540,
3597,
2378,
1006,
18765,
1007,
1036,
9146,
1006,
1007,
1036,
10968,
1012,
8278,
16096,
15457,
28550,
2102,
1063,
3853,
9146,
1006,
4769,
9111,
1010,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
2512,
3401,
1010,
21318,
3372,
17788,
2575,
4654,
8197,
2854,
1010,
22017,
2140,
3039,
1010,
21318,
3372,
2620,
1058,
1010,
27507,
16703,
1054,
1010,
27507,
16703,
1055,
1007,
6327,
1025,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-06-18
*/
pragma solidity ^0.4.24;
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Lib: Safe Math
// ---------
// ----------------------------------------------------------------------------
// Sample Token Contract
//
// Symbol : PINU
// Name : PUTIN INU
// Total supply : 100000000000000000000
// Decimals : 13
// Owner Account : 0xDFa4Fb78aa3Bb19187EC40f491F628f07Ead0736
//
// Enjoy.
//-------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
/**
ERC Token Standard #20 Interface
https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
*/
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
/**
Contract function to receive approval and execute function in one call
Borrowed from MiniMeToken
*/
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
/**
ERC20 Token, with the addition of symbol, name and decimals and assisted token transfers
*/
contract Token is ERC20Interface, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
constructor() public {
symbol = "PINU";
name = "PUTIN INU";
decimals = 13;
_totalSupply = 100000000000000000000;
balances[0xDFa4Fb78aa3Bb19187EC40f491F628f07Ead0736] = _totalSupply;
emit Transfer(address(0), 0xDFa4Fb78aa3Bb19187EC40f491F628f07Ead0736, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5757,
1011,
2324,
1008,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1018,
1012,
2484,
1025,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
5622,
2497,
1024,
3647,
8785,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1013,
1013,
7099,
19204,
3206,
1013,
1013,
1013,
1013,
6454,
1024,
9231,
2226,
1013,
1013,
2171,
1024,
22072,
1999,
2226,
1013,
1013,
2561,
4425,
1024,
6694,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
8889,
2692,
1013,
1013,
26066,
2015,
1024,
2410,
1013,
1013,
3954,
4070,
1024,
1014,
2595,
20952,
2050,
2549,
26337,
2581,
2620,
11057,
2509,
10322,
16147,
15136,
2581,
8586,
12740,
2546,
26224,
2487,
2546,
2575,
22407,
2546,
2692,
2581,
13775,
2692,
2581,
21619,
1013,
1013,
1013,
1013,
5959,
1012,
1013,
1013,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
1011,
3206,
3647,
18900,
2232,
1063,
3853,
3647,
4215,
2094,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
1039,
1027,
1037,
1009,
1038,
1025,
5478,
1006,
1039,
1028,
1027,
1037,
1007,
1025,
1065,
3853,
3647,
6342,
2497,
1006,
21318,
3372,
1037,
1010,
21318,
3372,
1038,
1007,
2270,
5760,
5651,
1006,
21318,
3372,
1039,
1007,
1063,
5478,
1006,
1038,
1026,
1027,
1037,
1007,
1025,
1039,
1027,
1037,
1011,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-09-19
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol
pragma solidity ^0.8.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 currentAllowance = allowance(account, _msgSender());
require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
unchecked {
_approve(account, _msgSender(), currentAllowance - amount);
}
_burn(account, amount);
}
}
// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Capped.sol
pragma solidity ^0.8.0;
/**
* @dev Extension of {ERC20} that adds a cap to the supply of tokens.
*/
abstract contract ERC20Capped is ERC20 {
uint256 private immutable _cap;
/**
* @dev Sets the value of the `cap`. This value is immutable, it can only be
* set once during construction.
*/
constructor(uint256 cap_) {
require(cap_ > 0, "ERC20Capped: cap is 0");
_cap = cap_;
}
/**
* @dev Returns the cap on the token's total supply.
*/
function cap() public view virtual returns (uint256) {
return _cap;
}
/**
* @dev See {ERC20-_mint}.
*/
function _mint(address account, uint256 amount) internal virtual override {
require(ERC20.totalSupply() + amount <= cap(), "ERC20Capped: cap exceeded");
super._mint(account, amount);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: erc-payable-token/contracts/token/ERC1363/IERC1363.sol
pragma solidity ^0.8.0;
/**
* @title IERC1363 Interface
* @dev Interface for a Payable Token contract as defined in
* https://eips.ethereum.org/EIPS/eip-1363
*/
interface IERC1363 is IERC20, IERC165 {
/**
* @notice Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
* @param recipient address The address which you want to transfer to
* @param amount uint256 The amount of tokens to be transferred
* @return true unless throwing
*/
function transferAndCall(address recipient, uint256 amount) external returns (bool);
/**
* @notice Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
* @param recipient address The address which you want to transfer to
* @param amount uint256 The amount of tokens to be transferred
* @param data bytes Additional data with no specified format, sent in call to `recipient`
* @return true unless throwing
*/
function transferAndCall(
address recipient,
uint256 amount,
bytes calldata data
) external returns (bool);
/**
* @notice Transfer tokens from one address to another and then call `onTransferReceived` on receiver
* @param sender address The address which you want to send tokens from
* @param recipient address The address which you want to transfer to
* @param amount uint256 The amount of tokens to be transferred
* @return true unless throwing
*/
function transferFromAndCall(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @notice Transfer tokens from one address to another and then call `onTransferReceived` on receiver
* @param sender address The address which you want to send tokens from
* @param recipient address The address which you want to transfer to
* @param amount uint256 The amount of tokens to be transferred
* @param data bytes Additional data with no specified format, sent in call to `recipient`
* @return true unless throwing
*/
function transferFromAndCall(
address sender,
address recipient,
uint256 amount,
bytes calldata data
) external returns (bool);
/**
* @notice Approve the passed address to spend the specified amount of tokens on behalf of msg.sender
* and then call `onApprovalReceived` on spender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender address The address which will spend the funds
* @param amount uint256 The amount of tokens to be spent
*/
function approveAndCall(address spender, uint256 amount) external returns (bool);
/**
* @notice Approve the passed address to spend the specified amount of tokens on behalf of msg.sender
* and then call `onApprovalReceived` on spender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender address The address which will spend the funds
* @param amount uint256 The amount of tokens to be spent
* @param data bytes Additional data with no specified format, sent in call to `spender`
*/
function approveAndCall(
address spender,
uint256 amount,
bytes calldata data
) external returns (bool);
}
// File: erc-payable-token/contracts/token/ERC1363/IERC1363Receiver.sol
pragma solidity ^0.8.0;
/**
* @title IERC1363Receiver Interface
* @dev Interface for any contract that wants to support transferAndCall or transferFromAndCall
* from ERC1363 token contracts as defined in
* https://eips.ethereum.org/EIPS/eip-1363
*/
interface IERC1363Receiver {
/**
* @notice Handle the receipt of ERC1363 tokens
* @dev Any ERC1363 smart contract calls this function on the recipient
* after a `transfer` or a `transferFrom`. This function MAY throw to revert and reject the
* transfer. Return of other than the magic value MUST result in the
* transaction being reverted.
* Note: the token contract address is always the message sender.
* @param operator address The address which called `transferAndCall` or `transferFromAndCall` function
* @param sender address The address which are token transferred from
* @param amount uint256 The amount of tokens transferred
* @param data bytes Additional data with no specified format
* @return `bytes4(keccak256("onTransferReceived(address,address,uint256,bytes)"))` unless throwing
*/
function onTransferReceived(
address operator,
address sender,
uint256 amount,
bytes calldata data
) external returns (bytes4);
}
// File: erc-payable-token/contracts/token/ERC1363/IERC1363Spender.sol
pragma solidity ^0.8.0;
/**
* @title IERC1363Spender Interface
* @dev Interface for any contract that wants to support approveAndCall
* from ERC1363 token contracts as defined in
* https://eips.ethereum.org/EIPS/eip-1363
*/
interface IERC1363Spender {
/**
* @notice Handle the approval of ERC1363 tokens
* @dev Any ERC1363 smart contract calls this function on the recipient
* after an `approve`. This function MAY throw to revert and reject the
* approval. Return of other than the magic value MUST result in the
* transaction being reverted.
* Note: the token contract address is always the message sender.
* @param sender address The address which called `approveAndCall` function
* @param amount uint256 The amount of tokens to be spent
* @param data bytes Additional data with no specified format
* @return `bytes4(keccak256("onApprovalReceived(address,uint256,bytes)"))` unless throwing
*/
function onApprovalReceived(
address sender,
uint256 amount,
bytes calldata data
) external returns (bytes4);
}
// File: erc-payable-token/contracts/token/ERC1363/ERC1363.sol
pragma solidity ^0.8.0;
/**
* @title ERC1363
* @dev Implementation of an ERC1363 interface
*/
abstract contract ERC1363 is ERC20, IERC1363, ERC165 {
using Address for address;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC1363).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Transfer tokens to a specified address and then execute a callback on recipient.
* @param recipient The address to transfer to.
* @param amount The amount to be transferred.
* @return A boolean that indicates if the operation was successful.
*/
function transferAndCall(address recipient, uint256 amount) public virtual override returns (bool) {
return transferAndCall(recipient, amount, "");
}
/**
* @dev Transfer tokens to a specified address and then execute a callback on recipient.
* @param recipient The address to transfer to
* @param amount The amount to be transferred
* @param data Additional data with no specified format
* @return A boolean that indicates if the operation was successful.
*/
function transferAndCall(
address recipient,
uint256 amount,
bytes memory data
) public virtual override returns (bool) {
transfer(recipient, amount);
require(_checkAndCallTransfer(_msgSender(), recipient, amount, data), "ERC1363: _checkAndCallTransfer reverts");
return true;
}
/**
* @dev Transfer tokens from one address to another and then execute a callback on recipient.
* @param sender The address which you want to send tokens from
* @param recipient The address which you want to transfer to
* @param amount The amount of tokens to be transferred
* @return A boolean that indicates if the operation was successful.
*/
function transferFromAndCall(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
return transferFromAndCall(sender, recipient, amount, "");
}
/**
* @dev Transfer tokens from one address to another and then execute a callback on recipient.
* @param sender The address which you want to send tokens from
* @param recipient The address which you want to transfer to
* @param amount The amount of tokens to be transferred
* @param data Additional data with no specified format
* @return A boolean that indicates if the operation was successful.
*/
function transferFromAndCall(
address sender,
address recipient,
uint256 amount,
bytes memory data
) public virtual override returns (bool) {
transferFrom(sender, recipient, amount);
require(_checkAndCallTransfer(sender, recipient, amount, data), "ERC1363: _checkAndCallTransfer reverts");
return true;
}
/**
* @dev Approve spender to transfer tokens and then execute a callback on recipient.
* @param spender The address allowed to transfer to
* @param amount The amount allowed to be transferred
* @return A boolean that indicates if the operation was successful.
*/
function approveAndCall(address spender, uint256 amount) public virtual override returns (bool) {
return approveAndCall(spender, amount, "");
}
/**
* @dev Approve spender to transfer tokens and then execute a callback on recipient.
* @param spender The address allowed to transfer to.
* @param amount The amount allowed to be transferred.
* @param data Additional data with no specified format.
* @return A boolean that indicates if the operation was successful.
*/
function approveAndCall(
address spender,
uint256 amount,
bytes memory data
) public virtual override returns (bool) {
approve(spender, amount);
require(_checkAndCallApprove(spender, amount, data), "ERC1363: _checkAndCallApprove reverts");
return true;
}
/**
* @dev Internal function to invoke `onTransferReceived` on a target address
* The call is not executed if the target address is not a contract
* @param sender address Representing the previous owner of the given token value
* @param recipient address Target address that will receive the tokens
* @param amount uint256 The amount mount of tokens to be transferred
* @param data bytes Optional data to send along with the call
* @return whether the call correctly returned the expected magic value
*/
function _checkAndCallTransfer(
address sender,
address recipient,
uint256 amount,
bytes memory data
) internal virtual returns (bool) {
if (!recipient.isContract()) {
return false;
}
bytes4 retval = IERC1363Receiver(recipient).onTransferReceived(_msgSender(), sender, amount, data);
return (retval == IERC1363Receiver(recipient).onTransferReceived.selector);
}
/**
* @dev Internal function to invoke `onApprovalReceived` on a target address
* The call is not executed if the target address is not a contract
* @param spender address The address which will spend the funds
* @param amount uint256 The amount of tokens to be spent
* @param data bytes Optional data to send along with the call
* @return whether the call correctly returned the expected magic value
*/
function _checkAndCallApprove(
address spender,
uint256 amount,
bytes memory data
) internal virtual returns (bool) {
if (!spender.isContract()) {
return false;
}
bytes4 retval = IERC1363Spender(spender).onApprovalReceived(_msgSender(), amount, data);
return (retval == IERC1363Spender(spender).onApprovalReceived.selector);
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: eth-token-recover/contracts/TokenRecover.sol
pragma solidity ^0.8.0;
/**
* @title TokenRecover
* @dev Allows owner to recover any ERC20 sent into the contract
*/
contract TokenRecover is Ownable {
/**
* @dev Remember that only owner can call so be careful when use on contracts generated from other contracts.
* @param tokenAddress The token contract address
* @param tokenAmount Number of tokens to be sent
*/
function recoverERC20(address tokenAddress, uint256 tokenAmount) public virtual onlyOwner {
IERC20(tokenAddress).transfer(owner(), tokenAmount);
}
}
// File: contracts/token/ERC20/behaviours/ERC20Decimals.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Decimals
* @dev Implementation of the ERC20Decimals. Extension of {ERC20} that adds decimals storage slot.
*/
abstract contract ERC20Decimals is ERC20 {
uint8 private immutable _decimals;
/**
* @dev Sets the value of the `decimals`. This value is immutable, it can only be
* set once during construction.
*/
constructor(uint8 decimals_) {
_decimals = decimals_;
}
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
}
// File: contracts/token/ERC20/behaviours/ERC20Mintable.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Mintable
* @dev Implementation of the ERC20Mintable. Extension of {ERC20} that adds a minting behaviour.
*/
abstract contract ERC20Mintable is ERC20 {
// indicates if minting is finished
bool private _mintingFinished = false;
/**
* @dev Emitted during finish minting
*/
event MintFinished();
/**
* @dev Tokens can be minted only before minting finished.
*/
modifier canMint() {
require(!_mintingFinished, "ERC20Mintable: minting is finished");
_;
}
/**
* @return if minting is finished or not.
*/
function mintingFinished() external view returns (bool) {
return _mintingFinished;
}
/**
* @dev Function to mint tokens.
*
* WARNING: it allows everyone to mint new tokens. Access controls MUST be defined in derived contracts.
*
* @param account The address that will receive the minted tokens
* @param amount The amount of tokens to mint
*/
function mint(address account, uint256 amount) external canMint {
_mint(account, amount);
}
/**
* @dev Function to stop minting new tokens.
*
* WARNING: it allows everyone to finish minting. Access controls MUST be defined in derived contracts.
*/
function finishMinting() external canMint {
_finishMinting();
}
/**
* @dev Function to stop minting new tokens.
*/
function _finishMinting() internal virtual {
_mintingFinished = true;
emit MintFinished();
}
}
// File: @openzeppelin/contracts/access/IAccessControl.sol
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/access/AccessControl.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
function _grantRole(bytes32 role, address account) private {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// File: contracts/access/Roles.sol
pragma solidity ^0.8.0;
contract Roles is AccessControl {
bytes32 public constant MINTER_ROLE = keccak256("MINTER");
constructor() {
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(MINTER_ROLE, _msgSender());
}
modifier onlyMinter() {
require(hasRole(MINTER_ROLE, _msgSender()), "Roles: caller does not have the MINTER role");
_;
}
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor(address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/token/ERC20/PowerfulERC20.sol
pragma solidity ^0.8.0;
/**
* @title PowerfulERC20
* @dev Implementation of the PowerfulERC20
*/
contract PowerfulERC20 is
ERC20Decimals,
ERC20Capped,
ERC20Mintable,
ERC20Burnable,
ERC1363,
TokenRecover,
Roles,
ServicePayer
{
constructor(
string memory name_,
string memory symbol_,
uint8 decimals_,
uint256 cap_,
uint256 initialBalance_,
address payable feeReceiver_
)
payable
ERC20(name_, symbol_)
ERC20Decimals(decimals_)
ERC20Capped(cap_)
ServicePayer(feeReceiver_, "PowerfulERC20")
{
// Immutable variables cannot be read during contract creation time
// https://github.com/ethereum/solidity/issues/10463
require(initialBalance_ <= cap_, "ERC20Capped: cap exceeded");
ERC20._mint(_msgSender(), initialBalance_);
}
function decimals() public view virtual override(ERC20, ERC20Decimals) returns (uint8) {
return super.decimals();
}
function supportsInterface(bytes4 interfaceId) public view virtual override(AccessControl, ERC1363) returns (bool) {
return super.supportsInterface(interfaceId);
}
/**
* @dev Function to mint tokens.
*
* NOTE: restricting access to addresses with MINTER role. See {ERC20Mintable-mint}.
*
* @param account The address that will receive the minted tokens
* @param amount The amount of tokens to mint
*/
function _mint(address account, uint256 amount) internal override(ERC20, ERC20Capped) onlyMinter {
super._mint(account, amount);
}
/**
* @dev Function to stop minting new tokens.
*
* NOTE: restricting access to owner only. See {ERC20Mintable-finishMinting}.
*/
function _finishMinting() internal override onlyOwner {
super._finishMinting();
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5641,
1011,
2539,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
10210,
1013,
1013,
5371,
1024,
1030,
2330,
4371,
27877,
2378,
1013,
8311,
1013,
19204,
1013,
9413,
2278,
11387,
1013,
29464,
11890,
11387,
1012,
14017,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1022,
1012,
1014,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
8278,
1997,
1996,
9413,
2278,
11387,
3115,
2004,
4225,
1999,
1996,
1041,
11514,
1012,
1008,
1013,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
1006,
4769,
5247,
2121,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1036,
4604,
2121,
1036,
2000,
1036,
7799,
1036,
2478,
1996,
1008,
21447,
7337,
1012,
1036,
3815,
1036,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
/**
*Submitted for verification at Etherscan.io on 2021-05-18
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract Chihuahua is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100000000000 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'Chihuahua';
string private _symbol = 'CHIH';
uint8 private _decimals = 9;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount) private pure returns (uint256, uint256) {
uint256 tFee = tAmount.div(100).mul(2);
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} | True | [
101,
1013,
1008,
1008,
1008,
7864,
2005,
22616,
2012,
28855,
29378,
1012,
22834,
2006,
25682,
1011,
5709,
1011,
2324,
1008,
1013,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
4895,
13231,
27730,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1020,
1012,
2260,
1025,
10061,
3206,
6123,
1063,
3853,
1035,
5796,
5620,
10497,
2121,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
4769,
3477,
3085,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1025,
1065,
3853,
1035,
5796,
2290,
2850,
2696,
1006,
1007,
4722,
3193,
7484,
5651,
1006,
27507,
3638,
1007,
1063,
2023,
1025,
1013,
1013,
4223,
2110,
14163,
2696,
8553,
5432,
2302,
11717,
24880,
16044,
1011,
2156,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
5024,
3012,
1013,
3314,
1013,
25717,
2487,
2709,
5796,
2290,
1012,
2951,
1025,
1065,
1065,
8278,
29464,
11890,
11387,
1063,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
1999,
4598,
1012,
1008,
1013,
3853,
21948,
6279,
22086,
1006,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3815,
1997,
19204,
2015,
3079,
2011,
1036,
4070,
1036,
1012,
1008,
1013,
3853,
5703,
11253,
1006,
4769,
4070,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5829,
1036,
3815,
1036,
19204,
2015,
2013,
1996,
20587,
1005,
1055,
4070,
2000,
1036,
7799,
1036,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
12495,
3215,
1037,
1063,
4651,
1065,
2724,
1012,
1008,
1013,
3853,
4651,
1006,
4769,
7799,
1010,
21318,
3372,
17788,
2575,
3815,
1007,
6327,
5651,
1006,
22017,
2140,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
5651,
1996,
3588,
2193,
1997,
19204,
2015,
2008,
1036,
5247,
2121,
1036,
2097,
2022,
1008,
3039,
2000,
5247,
2006,
6852,
1997,
1036,
3954,
1036,
2083,
1063,
4651,
19699,
5358,
1065,
1012,
2023,
2003,
1008,
5717,
2011,
12398,
1012,
1008,
1008,
2023,
3643,
3431,
2043,
1063,
14300,
1065,
2030,
1063,
4651,
19699,
5358,
1065,
2024,
2170,
1012,
1008,
1013,
3853,
21447,
1006,
4769,
3954,
1010,
4769,
5247,
2121,
1007,
6327,
3193,
5651,
1006,
21318,
3372,
17788,
2575,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4520,
1036,
3815,
1036,
2004,
1996,
21447,
1997,
1036,
5247,
2121,
1036,
2058,
1996,
20587,
1005,
1055,
19204,
2015,
1012,
1008,
1008,
5651,
1037,
22017,
20898,
3643,
8131,
3251,
1996,
3169,
4594,
1012,
1008,
1008,
2590,
1024,
2022,
8059,
2008,
5278,
2019,
21447,
2007,
2023,
4118,
7545,
1996,
3891,
1008,
2008,
2619,
2089,
2224,
2119,
1996,
2214,
1998,
1996,
2047,
21447,
2011,
15140,
1008,
12598,
13063,
1012,
2028,
2825,
5576,
2000,
10210,
28731,
2023,
2679,
1008,
4650,
2003,
2000,
2034,
5547,
1996,
5247,
2121,
1005,
1055,
21447,
2000,
1014,
1998,
2275,
1996,
1008,
9059,
3643,
5728,
1024,
1008,
16770,
1024,
1013,
1013,
21025,
2705,
12083,
1012,
4012,
1013,
28855,
14820,
1013,
1041,
11514,
2015,
1013,
3314,
1013,
2322,
1001,
3277,
9006,
3672,
1011,
25246,
25746,
22610,
24594,
1008,
1008,
12495,
3215,
2019,
1063,
6226,
1065,
2724,
1012,
1008,
1013,
3853,
14300,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
pragma solidity 0.6.12;
// SPDX-License-Identifier: BSD-3-Clause
/**
* Development Fund Lock Till 3 Months Release 5%
*
*/
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address private _owner;
address public pendingOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor () internal {
_owner = msg.sender;
emit OwnershipTransferred(address(0), _owner);
}
/**
* @return the address of the owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner());
_;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyPendingOwner() {
assert(msg.sender != address(0));
require(msg.sender == pendingOwner);
_;
}
/**
* @return true if `msg.sender` is the owner of the contract.
*/
function isOwner() public view returns (bool) {
return msg.sender == _owner;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function transferOwnership(address _newOwner) public onlyOwner {
require(_newOwner != address(0));
pendingOwner = _newOwner;
}
/**
* @dev Allows the pendingOwner address to finalize the transfer.
*/
function claimOwnership() onlyPendingOwner public {
_transferOwnership(pendingOwner);
pendingOwner = address(0);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0));
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface token {
function transfer(address, uint) external returns (bool);
}
contract TokenLock is Ownable {
address public constant beneficiary = 0x1Cb48D072A5Df6fE62AE79cCbF1B83288e44257E;
// unlock timestamp in seconds (Jan 5 2021 UTC)
uint public constant unlockTime = 1609821556;
function isUnlocked() public view returns (bool) {
return now > unlockTime;
}
function claim(address _tokenAddr, uint _amount) public onlyOwner {
require(isUnlocked(), "Cannot transfer tokens while locked.");
token(_tokenAddr).transfer(beneficiary, _amount);
}
} | True | [
101,
10975,
8490,
2863,
5024,
3012,
1014,
1012,
1020,
1012,
2260,
1025,
1013,
1013,
23772,
2595,
1011,
6105,
1011,
8909,
4765,
18095,
1024,
18667,
2094,
1011,
1017,
1011,
11075,
1013,
1008,
1008,
1008,
2458,
4636,
5843,
6229,
1017,
2706,
2713,
1019,
1003,
1008,
1008,
1013,
1013,
1008,
1008,
1008,
1030,
2516,
2219,
3085,
1008,
1030,
16475,
1996,
2219,
3085,
3206,
2038,
2019,
3954,
4769,
1010,
1998,
3640,
3937,
20104,
2491,
1008,
4972,
1010,
2023,
21934,
24759,
14144,
1996,
7375,
1997,
1000,
5310,
6656,
2015,
1000,
1012,
1008,
1013,
3206,
2219,
3085,
1063,
4769,
2797,
1035,
3954,
1025,
4769,
2270,
14223,
12384,
2121,
1025,
2724,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
25331,
3025,
12384,
2121,
1010,
4769,
25331,
2047,
12384,
2121,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
1996,
2219,
3085,
9570,
2953,
4520,
1996,
2434,
1036,
3954,
1036,
1997,
1996,
3206,
2000,
1996,
4604,
2121,
1008,
4070,
1012,
1008,
1013,
9570,
2953,
1006,
1007,
4722,
1063,
1035,
3954,
1027,
5796,
2290,
1012,
4604,
2121,
1025,
12495,
2102,
6095,
6494,
3619,
7512,
5596,
1006,
4769,
1006,
1014,
1007,
1010,
1035,
3954,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2709,
1996,
4769,
1997,
1996,
3954,
1012,
1008,
1013,
3853,
3954,
1006,
1007,
2270,
3193,
5651,
1006,
4769,
1007,
1063,
2709,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
12384,
2121,
1006,
1007,
1063,
5478,
1006,
11163,
7962,
2121,
1006,
1007,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
11618,
2065,
2170,
2011,
2151,
4070,
2060,
2084,
1996,
3954,
1012,
1008,
1013,
16913,
18095,
2069,
11837,
4667,
12384,
2121,
1006,
1007,
1063,
20865,
1006,
5796,
2290,
1012,
4604,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
5478,
1006,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
14223,
12384,
2121,
1007,
1025,
1035,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
2709,
2995,
2065,
1036,
5796,
2290,
1012,
4604,
2121,
1036,
2003,
1996,
3954,
1997,
1996,
3206,
1012,
1008,
1013,
3853,
11163,
7962,
2121,
1006,
1007,
2270,
3193,
5651,
1006,
22017,
2140,
1007,
1063,
2709,
5796,
2290,
1012,
4604,
2121,
1027,
1027,
1035,
3954,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
2783,
3954,
2000,
4651,
2491,
1997,
1996,
3206,
2000,
1037,
2047,
12384,
2121,
1012,
1008,
1030,
11498,
2213,
1035,
2047,
12384,
2121,
1996,
4769,
2000,
4651,
6095,
2000,
1012,
1008,
1013,
3853,
4651,
12384,
2545,
5605,
1006,
4769,
1035,
2047,
12384,
2121,
1007,
2270,
2069,
12384,
2121,
1063,
5478,
1006,
1035,
2047,
12384,
2121,
999,
1027,
4769,
1006,
1014,
1007,
1007,
1025,
14223,
12384,
2121,
1027,
1035,
2047,
12384,
2121,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4473,
1996,
14223,
12384,
2121,
4769,
2000,
2345,
4697,
1996,
4651,
1012,
1008,
1013,
3853,
4366,
12384,
2545,
5605,
1006,
1007,
2069,
11837,
4667,
12384,
2121,
2270,
1063,
1035,
4651,
12384,
2545,
5605,
1006,
14223,
12384,
2121,
1007,
1025,
14223,
12384,
2121,
1027,
4769,
1006,
1014,
1007,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
15210,
2491,
1997,
1996,
3206,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
// _ _ _ _ __ _
// | | (_) | | | / _(_)
// | | ___| |_| |_ ___ _ __ | |_ _ _ __ __ _ _ __ ___ ___
// | |/ / | __| __/ _ \ '_ \ | _| | '_ \ / _` | '_ \ / __/ _ \
// | <| | |_| || __/ | | |_| | | | | | | (_| | | | | (_| __/
// |_|\_\_|\__|\__\___|_| |_(_)_| |_|_| |_|\__,_|_| |_|\___\___|
//
pragma solidity ^0.5.16;
library SafeMathInt {
int256 private constant MIN_INT256 = int256(1) << 255;
int256 private constant MAX_INT256 = ~(int256(1) << 255);
/**
* @dev Multiplies two int256 variables and fails on overflow.
*/
function mul(int256 a, int256 b)
internal
pure
returns (int256)
{
int256 c = a * b;
// Detect overflow when multiplying MIN_INT256 with -1
require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
require((b == 0) || (c / b == a));
return c;
}
/**
* @dev Division of two int256 variables and fails on overflow.
*/
function div(int256 a, int256 b)
internal
pure
returns (int256)
{
// Prevent overflow when dividing MIN_INT256 by -1
require(b != -1 || a != MIN_INT256);
// Solidity already throws when dividing by 0.
return a / b;
}
/**
* @dev Subtracts two int256 variables and fails on overflow.
*/
function sub(int256 a, int256 b)
internal
pure
returns (int256)
{
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a));
return c;
}
/**
* @dev Adds two int256 variables and fails on overflow.
*/
function add(int256 a, int256 b)
internal
pure
returns (int256)
{
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
/**
* @dev Converts to absolute value, and fails on overflow.
*/
function abs(int256 a)
internal
pure
returns (int256)
{
require(a != MIN_INT256);
return a < 0 ? -a : a;
}
}
interface IERC20 {
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function transferFrom(address sender, address recipient, uint amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
contract Context {
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
}
contract ERC20_BASED is Context, IERC20 {
using SafeMath for uint;
uint internal _gonsPerFragment;
mapping(address => uint) internal _gonBalances;
mapping (address => mapping (address => uint)) internal _allowedFragments;
uint internal _totalSupply;
function totalSupply() public view returns (uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint) {
return _gonBalances[account].div(_gonsPerFragment);
}
function transfer(address recipient, uint amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns (uint) {
return _allowedFragments[owner][spender];
}
function approve(address spender, uint amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowedFragments[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowedFragments[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowedFragments[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
uint gonValue = amount.mul(_gonsPerFragment);
_gonBalances[sender] = _gonBalances[sender].sub(gonValue, "ERC20: transfer amount exceeds balance");
_gonBalances[recipient] = _gonBalances[recipient].add(gonValue);
emit Transfer(sender, recipient, amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowedFragments[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns (uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns (uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns (uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
contract kBASEv0 is ERC20_BASED, ERC20Detailed {
using SafeMath for uint;
using SafeMathInt for int256;
address public governance;
constructor () public ERC20Detailed("kBASEv0 - Kitten.Finance", "kBASEv0", uint8(DECIMALS)) {
governance = msg.sender;
_totalSupply = INITIAL_FRAGMENTS_SUPPLY;
_gonBalances[msg.sender] = TOTAL_GONS;
_gonsPerFragment = TOTAL_GONS.div(_totalSupply);
emit Transfer(address(0x0), msg.sender, _totalSupply);
}
function setGovernance(address _governance) public {
require(msg.sender == governance, "!governance");
governance = _governance;
}
//=====================================================================
uint private constant DECIMALS = 18;
uint private constant MAX_UINT256 = ~uint(0);
uint private constant INITIAL_FRAGMENTS_SUPPLY = 100000 * uint(10)**DECIMALS;
uint private constant TOTAL_GONS = MAX_UINT256 - (MAX_UINT256 % INITIAL_FRAGMENTS_SUPPLY);
uint private constant MAX_SUPPLY = ~uint128(0); // (2^128) - 1
event LogRebase(uint indexed epoch, uint totalSupply);
event LogMonetaryPolicyUpdated(address monetaryPolicy);
address public monetaryPolicy;
function setMonetaryPolicy(address monetaryPolicy_) external
{
require(msg.sender == governance, "!governance");
monetaryPolicy = monetaryPolicy_;
emit LogMonetaryPolicyUpdated(monetaryPolicy_);
}
function rebase(uint epoch, int256 supplyDelta) external returns (uint)
{
require(msg.sender == monetaryPolicy, "!monetaryPolicy");
if (supplyDelta == 0) {
emit LogRebase(epoch, _totalSupply);
return _totalSupply;
}
if (supplyDelta < 0) {
_totalSupply = _totalSupply.sub(uint(supplyDelta.abs()));
} else {
_totalSupply = _totalSupply.add(uint(supplyDelta));
}
if (_totalSupply > MAX_SUPPLY) {
_totalSupply = MAX_SUPPLY;
}
_gonsPerFragment = TOTAL_GONS.div(_totalSupply);
// From this point forward, _gonsPerFragment is taken as the source of truth.
// We recalculate a new _totalSupply to be in agreement with the _gonsPerFragment
// conversion rate.
// This means our applied supplyDelta can deviate from the requested supplyDelta,
// but this deviation is guaranteed to be < (_totalSupply^2)/(TOTAL_GONS - _totalSupply).
//
// In the case of _totalSupply <= MAX_UINT128 (our current supply cap), this
// deviation is guaranteed to be < 1, so we can omit this step. If the supply cap is
// ever increased, it must be re-included.
// _totalSupply = TOTAL_GONS.div(_gonsPerFragment)
emit LogRebase(epoch, _totalSupply);
return _totalSupply;
}
//=====================================================================
} | True | [
101,
1013,
1013,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1064,
1064,
1006,
1035,
1007,
1064,
1064,
1064,
1013,
1035,
1006,
1035,
1007,
1013,
1013,
1064,
1064,
1035,
1035,
1035,
1064,
1064,
1035,
1064,
1064,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1064,
1064,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1035,
1013,
1013,
1064,
1064,
1013,
1013,
1064,
1035,
1035,
1064,
1035,
1035,
1013,
1035,
1032,
1005,
1035,
1032,
1064,
1035,
1064,
1064,
1005,
1035,
1032,
1013,
1035,
1036,
1064,
1005,
1035,
1032,
1013,
1035,
1035,
1013,
1035,
1032,
1013,
1013,
1064,
1026,
1064,
1064,
1064,
1035,
1064,
1064,
1064,
1035,
1035,
1013,
1064,
1064,
1064,
1035,
1064,
1064,
1064,
1064,
1064,
1064,
1064,
1006,
1035,
1064,
1064,
1064,
1064,
1064,
1006,
1035,
1064,
1035,
1035,
1013,
1013,
1013,
1064,
1035,
1064,
1032,
1035,
1032,
1035,
1064,
1032,
1035,
1035,
1064,
1032,
1035,
1035,
1032,
1035,
1035,
1035,
1064,
1035,
1064,
1064,
1035,
1006,
1035,
1007,
1035,
1064,
1064,
1035,
1064,
1035,
1064,
1064,
1035,
1064,
1032,
1035,
1035,
1010,
1035,
1064,
1035,
1064,
1064,
1035,
1064,
1032,
1035,
1035,
1035,
1032,
1035,
1035,
1035,
1064,
1013,
1013,
10975,
8490,
2863,
5024,
3012,
1034,
1014,
1012,
1019,
1012,
2385,
1025,
3075,
3647,
18900,
10606,
2102,
1063,
20014,
17788,
2575,
2797,
5377,
8117,
1035,
20014,
17788,
2575,
1027,
20014,
17788,
2575,
1006,
1015,
1007,
1026,
1026,
20637,
1025,
20014,
17788,
2575,
2797,
5377,
4098,
1035,
20014,
17788,
2575,
1027,
1066,
1006,
20014,
17788,
2575,
1006,
1015,
1007,
1026,
1026,
20637,
1007,
1025,
1013,
1008,
1008,
1008,
1030,
16475,
4800,
24759,
3111,
2048,
20014,
17788,
2575,
10857,
1998,
11896,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
14163,
2140,
1006,
20014,
17788,
2575,
1037,
1010,
20014,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
20014,
17788,
2575,
1007,
1063,
20014,
17788,
2575,
1039,
1027,
1037,
1008,
1038,
1025,
1013,
1013,
11487,
2058,
12314,
2043,
4800,
22086,
2075,
8117,
1035,
20014,
17788,
2575,
2007,
1011,
1015,
5478,
1006,
1039,
999,
1027,
8117,
1035,
20014,
17788,
2575,
1064,
1064,
1006,
1037,
1004,
8117,
1035,
20014,
17788,
2575,
1007,
999,
1027,
1006,
1038,
1004,
8117,
1035,
20014,
17788,
2575,
1007,
1007,
1025,
5478,
1006,
1006,
1038,
1027,
1027,
1014,
1007,
1064,
1064,
1006,
1039,
1013,
1038,
1027,
1027,
1037,
1007,
1007,
1025,
2709,
1039,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
2407,
1997,
2048,
20014,
17788,
2575,
10857,
1998,
11896,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
4487,
2615,
1006,
20014,
17788,
2575,
1037,
1010,
20014,
17788,
2575,
1038,
1007,
4722,
5760,
5651,
1006,
20014,
17788,
2575,
1007,
1063,
1013,
1013,
4652,
2058,
12314,
2043,
16023,
8117,
1035,
20014,
17788,
2575,
2011,
1011,
1015,
5478,
1006,
1038,
999,
1027,
1011,
1015,
1064,
1064,
1037,
999,
1027,
8117,
1035,
20014,
17788,
2575,
1007,
1025,
1013,
1013,
5024,
3012,
2525,
11618,
2043,
16023,
2011,
1014,
1012,
2709,
1037,
1013,
1038,
1025,
1065,
1013,
1008,
1008,
1008,
1030,
16475,
4942,
6494,
16649,
2048,
20014,
17788,
2575,
10857,
1998,
11896,
2006,
2058,
12314,
1012,
1008,
1013,
3853,
4942,
102
] | [
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1,
1
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.