repo_id
stringlengths 15
89
| file_path
stringlengths 27
180
| content
stringlengths 1
2.23M
| __index_level_0__
int64 0
0
|
|---|---|---|---|
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/poolformer.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# PoolFormer
## Overview
The PoolFormer model was proposed in [MetaFormer is Actually What You Need for Vision](https://arxiv.org/abs/2111.11418) by Sea AI Labs. Instead of designing complicated token mixer to achieve SOTA performance, the target of this work is to demonstrate the competence of transformer models largely stem from the general architecture MetaFormer.
The abstract from the paper is the following:
*Transformers have shown great potential in computer vision tasks. A common belief is their attention-based token mixer module contributes most to their competence. However, recent works show the attention-based module in transformers can be replaced by spatial MLPs and the resulted models still perform quite well. Based on this observation, we hypothesize that the general architecture of the transformers, instead of the specific token mixer module, is more essential to the model's performance. To verify this, we deliberately replace the attention module in transformers with an embarrassingly simple spatial pooling operator to conduct only the most basic token mixing. Surprisingly, we observe that the derived model, termed as PoolFormer, achieves competitive performance on multiple computer vision tasks. For example, on ImageNet-1K, PoolFormer achieves 82.1% top-1 accuracy, surpassing well-tuned vision transformer/MLP-like baselines DeiT-B/ResMLP-B24 by 0.3%/1.1% accuracy with 35%/52% fewer parameters and 48%/60% fewer MACs. The effectiveness of PoolFormer verifies our hypothesis and urges us to initiate the concept of "MetaFormer", a general architecture abstracted from transformers without specifying the token mixer. Based on the extensive experiments, we argue that MetaFormer is the key player in achieving superior results for recent transformer and MLP-like models on vision tasks. This work calls for more future research dedicated to improving MetaFormer instead of focusing on the token mixer modules. Additionally, our proposed PoolFormer could serve as a starting baseline for future MetaFormer architecture design.*
The figure below illustrates the architecture of PoolFormer. Taken from the [original paper](https://arxiv.org/abs/2111.11418).
<img width="600" src="https://user-images.githubusercontent.com/15921929/142746124-1ab7635d-2536-4a0e-ad43-b4fe2c5a525d.png"/>
This model was contributed by [heytanay](https://huggingface.co/heytanay). The original code can be found [here](https://github.com/sail-sg/poolformer).
## Usage tips
- PoolFormer has a hierarchical architecture, where instead of Attention, a simple Average Pooling layer is present. All checkpoints of the model can be found on the [hub](https://huggingface.co/models?other=poolformer).
- One can use [`PoolFormerImageProcessor`] to prepare images for the model.
- As most models, PoolFormer comes in different sizes, the details of which can be found in the table below.
| **Model variant** | **Depths** | **Hidden sizes** | **Params (M)** | **ImageNet-1k Top 1** |
| :---------------: | ------------- | ------------------- | :------------: | :-------------------: |
| s12 | [2, 2, 6, 2] | [64, 128, 320, 512] | 12 | 77.2 |
| s24 | [4, 4, 12, 4] | [64, 128, 320, 512] | 21 | 80.3 |
| s36 | [6, 6, 18, 6] | [64, 128, 320, 512] | 31 | 81.4 |
| m36 | [6, 6, 18, 6] | [96, 192, 384, 768] | 56 | 82.1 |
| m48 | [8, 8, 24, 8] | [96, 192, 384, 768] | 73 | 82.5 |
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with PoolFormer.
<PipelineTag pipeline="image-classification"/>
- [`PoolFormerForImageClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/image-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/image_classification.ipynb).
- See also: [Image classification task guide](../tasks/image_classification)
If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
## PoolFormerConfig
[[autodoc]] PoolFormerConfig
## PoolFormerFeatureExtractor
[[autodoc]] PoolFormerFeatureExtractor
- __call__
## PoolFormerImageProcessor
[[autodoc]] PoolFormerImageProcessor
- preprocess
## PoolFormerModel
[[autodoc]] PoolFormerModel
- forward
## PoolFormerForImageClassification
[[autodoc]] PoolFormerForImageClassification
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/layoutlmv2.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# LayoutLMV2
## Overview
The LayoutLMV2 model was proposed in [LayoutLMv2: Multi-modal Pre-training for Visually-Rich Document Understanding](https://arxiv.org/abs/2012.14740) by Yang Xu, Yiheng Xu, Tengchao Lv, Lei Cui, Furu Wei, Guoxin Wang, Yijuan Lu,
Dinei Florencio, Cha Zhang, Wanxiang Che, Min Zhang, Lidong Zhou. LayoutLMV2 improves [LayoutLM](layoutlm) to obtain
state-of-the-art results across several document image understanding benchmarks:
- information extraction from scanned documents: the [FUNSD](https://guillaumejaume.github.io/FUNSD/) dataset (a
collection of 199 annotated forms comprising more than 30,000 words), the [CORD](https://github.com/clovaai/cord)
dataset (a collection of 800 receipts for training, 100 for validation and 100 for testing), the [SROIE](https://rrc.cvc.uab.es/?ch=13) dataset (a collection of 626 receipts for training and 347 receipts for testing)
and the [Kleister-NDA](https://github.com/applicaai/kleister-nda) dataset (a collection of non-disclosure
agreements from the EDGAR database, including 254 documents for training, 83 documents for validation, and 203
documents for testing).
- document image classification: the [RVL-CDIP](https://www.cs.cmu.edu/~aharley/rvl-cdip/) dataset (a collection of
400,000 images belonging to one of 16 classes).
- document visual question answering: the [DocVQA](https://arxiv.org/abs/2007.00398) dataset (a collection of 50,000
questions defined on 12,000+ document images).
The abstract from the paper is the following:
*Pre-training of text and layout has proved effective in a variety of visually-rich document understanding tasks due to
its effective model architecture and the advantage of large-scale unlabeled scanned/digital-born documents. In this
paper, we present LayoutLMv2 by pre-training text, layout and image in a multi-modal framework, where new model
architectures and pre-training tasks are leveraged. Specifically, LayoutLMv2 not only uses the existing masked
visual-language modeling task but also the new text-image alignment and text-image matching tasks in the pre-training
stage, where cross-modality interaction is better learned. Meanwhile, it also integrates a spatial-aware self-attention
mechanism into the Transformer architecture, so that the model can fully understand the relative positional
relationship among different text blocks. Experiment results show that LayoutLMv2 outperforms strong baselines and
achieves new state-of-the-art results on a wide variety of downstream visually-rich document understanding tasks,
including FUNSD (0.7895 -> 0.8420), CORD (0.9493 -> 0.9601), SROIE (0.9524 -> 0.9781), Kleister-NDA (0.834 -> 0.852),
RVL-CDIP (0.9443 -> 0.9564), and DocVQA (0.7295 -> 0.8672). The pre-trained LayoutLMv2 model is publicly available at
this https URL.*
LayoutLMv2 depends on `detectron2`, `torchvision` and `tesseract`. Run the
following to install them:
```
python -m pip install 'git+https://github.com/facebookresearch/detectron2.git'
python -m pip install torchvision tesseract
```
(If you are developing for LayoutLMv2, note that passing the doctests also requires the installation of these packages.)
## Usage tips
- The main difference between LayoutLMv1 and LayoutLMv2 is that the latter incorporates visual embeddings during
pre-training (while LayoutLMv1 only adds visual embeddings during fine-tuning).
- LayoutLMv2 adds both a relative 1D attention bias as well as a spatial 2D attention bias to the attention scores in
the self-attention layers. Details can be found on page 5 of the [paper](https://arxiv.org/abs/2012.14740).
- Demo notebooks on how to use the LayoutLMv2 model on RVL-CDIP, FUNSD, DocVQA, CORD can be found [here](https://github.com/NielsRogge/Transformers-Tutorials).
- LayoutLMv2 uses Facebook AI's [Detectron2](https://github.com/facebookresearch/detectron2/) package for its visual
backbone. See [this link](https://detectron2.readthedocs.io/en/latest/tutorials/install.html) for installation
instructions.
- In addition to `input_ids`, [`~LayoutLMv2Model.forward`] expects 2 additional inputs, namely
`image` and `bbox`. The `image` input corresponds to the original document image in which the text
tokens occur. The model expects each document image to be of size 224x224. This means that if you have a batch of
document images, `image` should be a tensor of shape (batch_size, 3, 224, 224). This can be either a
`torch.Tensor` or a `Detectron2.structures.ImageList`. You don't need to normalize the channels, as this is
done by the model. Important to note is that the visual backbone expects BGR channels instead of RGB, as all models
in Detectron2 are pre-trained using the BGR format. The `bbox` input are the bounding boxes (i.e. 2D-positions)
of the input text tokens. This is identical to [`LayoutLMModel`]. These can be obtained using an
external OCR engine such as Google's [Tesseract](https://github.com/tesseract-ocr/tesseract) (there's a [Python
wrapper](https://pypi.org/project/pytesseract/) available). Each bounding box should be in (x0, y0, x1, y1)
format, where (x0, y0) corresponds to the position of the upper left corner in the bounding box, and (x1, y1)
represents the position of the lower right corner. Note that one first needs to normalize the bounding boxes to be on
a 0-1000 scale. To normalize, you can use the following function:
```python
def normalize_bbox(bbox, width, height):
return [
int(1000 * (bbox[0] / width)),
int(1000 * (bbox[1] / height)),
int(1000 * (bbox[2] / width)),
int(1000 * (bbox[3] / height)),
]
```
Here, `width` and `height` correspond to the width and height of the original document in which the token
occurs (before resizing the image). Those can be obtained using the Python Image Library (PIL) library for example, as
follows:
```python
from PIL import Image
image = Image.open(
"name_of_your_document - can be a png, jpg, etc. of your documents (PDFs must be converted to images)."
)
width, height = image.size
```
However, this model includes a brand new [`~transformers.LayoutLMv2Processor`] which can be used to directly
prepare data for the model (including applying OCR under the hood). More information can be found in the "Usage"
section below.
- Internally, [`~transformers.LayoutLMv2Model`] will send the `image` input through its visual backbone to
obtain a lower-resolution feature map, whose shape is equal to the `image_feature_pool_shape` attribute of
[`~transformers.LayoutLMv2Config`]. This feature map is then flattened to obtain a sequence of image tokens. As
the size of the feature map is 7x7 by default, one obtains 49 image tokens. These are then concatenated with the text
tokens, and send through the Transformer encoder. This means that the last hidden states of the model will have a
length of 512 + 49 = 561, if you pad the text tokens up to the max length. More generally, the last hidden states
will have a shape of `seq_length` + `image_feature_pool_shape[0]` *
`config.image_feature_pool_shape[1]`.
- When calling [`~transformers.LayoutLMv2Model.from_pretrained`], a warning will be printed with a long list of
parameter names that are not initialized. This is not a problem, as these parameters are batch normalization
statistics, which are going to have values when fine-tuning on a custom dataset.
- If you want to train the model in a distributed environment, make sure to call [`synchronize_batch_norm`] on the
model in order to properly synchronize the batch normalization layers of the visual backbone.
In addition, there's LayoutXLM, which is a multilingual version of LayoutLMv2. More information can be found on
[LayoutXLM's documentation page](layoutxlm).
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with LayoutLMv2. If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
<PipelineTag pipeline="text-classification"/>
- A notebook on how to [finetune LayoutLMv2 for text-classification on RVL-CDIP dataset](https://colab.research.google.com/github/NielsRogge/Transformers-Tutorials/blob/master/LayoutLMv2/RVL-CDIP/Fine_tuning_LayoutLMv2ForSequenceClassification_on_RVL_CDIP.ipynb).
- See also: [Text classification task guide](../tasks/sequence_classification)
<PipelineTag pipeline="question-answering"/>
- A notebook on how to [finetune LayoutLMv2 for question-answering on DocVQA dataset](https://colab.research.google.com/github/NielsRogge/Transformers-Tutorials/blob/master/LayoutLMv2/DocVQA/Fine_tuning_LayoutLMv2ForQuestionAnswering_on_DocVQA.ipynb).
- See also: [Question answering task guide](../tasks/question_answering)
- See also: [Document question answering task guide](../tasks/document_question_answering)
<PipelineTag pipeline="token-classification"/>
- A notebook on how to [finetune LayoutLMv2 for token-classification on CORD dataset](https://colab.research.google.com/github/NielsRogge/Transformers-Tutorials/blob/master/LayoutLMv2/CORD/Fine_tuning_LayoutLMv2ForTokenClassification_on_CORD.ipynb).
- A notebook on how to [finetune LayoutLMv2 for token-classification on FUNSD dataset](https://colab.research.google.com/github/NielsRogge/Transformers-Tutorials/blob/master/LayoutLMv2/FUNSD/Fine_tuning_LayoutLMv2ForTokenClassification_on_FUNSD_using_HuggingFace_Trainer.ipynb).
- See also: [Token classification task guide](../tasks/token_classification)
## Usage: LayoutLMv2Processor
The easiest way to prepare data for the model is to use [`LayoutLMv2Processor`], which internally
combines a image processor ([`LayoutLMv2ImageProcessor`]) and a tokenizer
([`LayoutLMv2Tokenizer`] or [`LayoutLMv2TokenizerFast`]). The image processor
handles the image modality, while the tokenizer handles the text modality. A processor combines both, which is ideal
for a multi-modal model like LayoutLMv2. Note that you can still use both separately, if you only want to handle one
modality.
```python
from transformers import LayoutLMv2ImageProcessor, LayoutLMv2TokenizerFast, LayoutLMv2Processor
image_processor = LayoutLMv2ImageProcessor() # apply_ocr is set to True by default
tokenizer = LayoutLMv2TokenizerFast.from_pretrained("microsoft/layoutlmv2-base-uncased")
processor = LayoutLMv2Processor(image_processor, tokenizer)
```
In short, one can provide a document image (and possibly additional data) to [`LayoutLMv2Processor`],
and it will create the inputs expected by the model. Internally, the processor first uses
[`LayoutLMv2ImageProcessor`] to apply OCR on the image to get a list of words and normalized
bounding boxes, as well to resize the image to a given size in order to get the `image` input. The words and
normalized bounding boxes are then provided to [`LayoutLMv2Tokenizer`] or
[`LayoutLMv2TokenizerFast`], which converts them to token-level `input_ids`,
`attention_mask`, `token_type_ids`, `bbox`. Optionally, one can provide word labels to the processor,
which are turned into token-level `labels`.
[`LayoutLMv2Processor`] uses [PyTesseract](https://pypi.org/project/pytesseract/), a Python
wrapper around Google's Tesseract OCR engine, under the hood. Note that you can still use your own OCR engine of
choice, and provide the words and normalized boxes yourself. This requires initializing
[`LayoutLMv2ImageProcessor`] with `apply_ocr` set to `False`.
In total, there are 5 use cases that are supported by the processor. Below, we list them all. Note that each of these
use cases work for both batched and non-batched inputs (we illustrate them for non-batched inputs).
**Use case 1: document image classification (training, inference) + token classification (inference), apply_ocr =
True**
This is the simplest case, in which the processor (actually the image processor) will perform OCR on the image to get
the words and normalized bounding boxes.
```python
from transformers import LayoutLMv2Processor
from PIL import Image
processor = LayoutLMv2Processor.from_pretrained("microsoft/layoutlmv2-base-uncased")
image = Image.open(
"name_of_your_document - can be a png, jpg, etc. of your documents (PDFs must be converted to images)."
).convert("RGB")
encoding = processor(
image, return_tensors="pt"
) # you can also add all tokenizer parameters here such as padding, truncation
print(encoding.keys())
# dict_keys(['input_ids', 'token_type_ids', 'attention_mask', 'bbox', 'image'])
```
**Use case 2: document image classification (training, inference) + token classification (inference), apply_ocr=False**
In case one wants to do OCR themselves, one can initialize the image processor with `apply_ocr` set to
`False`. In that case, one should provide the words and corresponding (normalized) bounding boxes themselves to
the processor.
```python
from transformers import LayoutLMv2Processor
from PIL import Image
processor = LayoutLMv2Processor.from_pretrained("microsoft/layoutlmv2-base-uncased", revision="no_ocr")
image = Image.open(
"name_of_your_document - can be a png, jpg, etc. of your documents (PDFs must be converted to images)."
).convert("RGB")
words = ["hello", "world"]
boxes = [[1, 2, 3, 4], [5, 6, 7, 8]] # make sure to normalize your bounding boxes
encoding = processor(image, words, boxes=boxes, return_tensors="pt")
print(encoding.keys())
# dict_keys(['input_ids', 'token_type_ids', 'attention_mask', 'bbox', 'image'])
```
**Use case 3: token classification (training), apply_ocr=False**
For token classification tasks (such as FUNSD, CORD, SROIE, Kleister-NDA), one can also provide the corresponding word
labels in order to train a model. The processor will then convert these into token-level `labels`. By default, it
will only label the first wordpiece of a word, and label the remaining wordpieces with -100, which is the
`ignore_index` of PyTorch's CrossEntropyLoss. In case you want all wordpieces of a word to be labeled, you can
initialize the tokenizer with `only_label_first_subword` set to `False`.
```python
from transformers import LayoutLMv2Processor
from PIL import Image
processor = LayoutLMv2Processor.from_pretrained("microsoft/layoutlmv2-base-uncased", revision="no_ocr")
image = Image.open(
"name_of_your_document - can be a png, jpg, etc. of your documents (PDFs must be converted to images)."
).convert("RGB")
words = ["hello", "world"]
boxes = [[1, 2, 3, 4], [5, 6, 7, 8]] # make sure to normalize your bounding boxes
word_labels = [1, 2]
encoding = processor(image, words, boxes=boxes, word_labels=word_labels, return_tensors="pt")
print(encoding.keys())
# dict_keys(['input_ids', 'token_type_ids', 'attention_mask', 'bbox', 'labels', 'image'])
```
**Use case 4: visual question answering (inference), apply_ocr=True**
For visual question answering tasks (such as DocVQA), you can provide a question to the processor. By default, the
processor will apply OCR on the image, and create [CLS] question tokens [SEP] word tokens [SEP].
```python
from transformers import LayoutLMv2Processor
from PIL import Image
processor = LayoutLMv2Processor.from_pretrained("microsoft/layoutlmv2-base-uncased")
image = Image.open(
"name_of_your_document - can be a png, jpg, etc. of your documents (PDFs must be converted to images)."
).convert("RGB")
question = "What's his name?"
encoding = processor(image, question, return_tensors="pt")
print(encoding.keys())
# dict_keys(['input_ids', 'token_type_ids', 'attention_mask', 'bbox', 'image'])
```
**Use case 5: visual question answering (inference), apply_ocr=False**
For visual question answering tasks (such as DocVQA), you can provide a question to the processor. If you want to
perform OCR yourself, you can provide your own words and (normalized) bounding boxes to the processor.
```python
from transformers import LayoutLMv2Processor
from PIL import Image
processor = LayoutLMv2Processor.from_pretrained("microsoft/layoutlmv2-base-uncased", revision="no_ocr")
image = Image.open(
"name_of_your_document - can be a png, jpg, etc. of your documents (PDFs must be converted to images)."
).convert("RGB")
question = "What's his name?"
words = ["hello", "world"]
boxes = [[1, 2, 3, 4], [5, 6, 7, 8]] # make sure to normalize your bounding boxes
encoding = processor(image, question, words, boxes=boxes, return_tensors="pt")
print(encoding.keys())
# dict_keys(['input_ids', 'token_type_ids', 'attention_mask', 'bbox', 'image'])
```
## LayoutLMv2Config
[[autodoc]] LayoutLMv2Config
## LayoutLMv2FeatureExtractor
[[autodoc]] LayoutLMv2FeatureExtractor
- __call__
## LayoutLMv2ImageProcessor
[[autodoc]] LayoutLMv2ImageProcessor
- preprocess
## LayoutLMv2Tokenizer
[[autodoc]] LayoutLMv2Tokenizer
- __call__
- save_vocabulary
## LayoutLMv2TokenizerFast
[[autodoc]] LayoutLMv2TokenizerFast
- __call__
## LayoutLMv2Processor
[[autodoc]] LayoutLMv2Processor
- __call__
## LayoutLMv2Model
[[autodoc]] LayoutLMv2Model
- forward
## LayoutLMv2ForSequenceClassification
[[autodoc]] LayoutLMv2ForSequenceClassification
## LayoutLMv2ForTokenClassification
[[autodoc]] LayoutLMv2ForTokenClassification
## LayoutLMv2ForQuestionAnswering
[[autodoc]] LayoutLMv2ForQuestionAnswering
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/gpt_neox_japanese.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# GPT-NeoX-Japanese
## Overview
We introduce GPT-NeoX-Japanese, which is an autoregressive language model for Japanese, trained on top of [https://github.com/EleutherAI/gpt-neox](https://github.com/EleutherAI/gpt-neox).
Japanese is a unique language with its large vocabulary and a combination of hiragana, katakana, and kanji writing scripts.
To address this distinct structure of the Japanese language, we use a [special sub-word tokenizer](https://github.com/tanreinama/Japanese-BPEEncoder_V2). We are very grateful to *tanreinama* for open-sourcing this incredibly helpful tokenizer.
Following the recommendations from Google's research on [PaLM](https://ai.googleblog.com/2022/04/pathways-language-model-palm-scaling-to.html), we have removed bias parameters from transformer blocks, achieving better model performance. Please refer [this article](https://medium.com/ml-abeja/training-a-better-gpt-2-93b157662ae4) in detail.
Development of the model was led by [Shinya Otani](https://github.com/SO0529), [Takayoshi Makabe](https://github.com/spider-man-tm), [Anuj Arora](https://github.com/Anuj040), and [Kyo Hattori](https://github.com/go5paopao) from [ABEJA, Inc.](https://www.abejainc.com/). For more information on this model-building activity, please refer [here (ja)](https://tech-blog.abeja.asia/entry/abeja-gpt-project-202207).
### Usage example
The `generate()` method can be used to generate text using GPT NeoX Japanese model.
```python
>>> from transformers import GPTNeoXJapaneseForCausalLM, GPTNeoXJapaneseTokenizer
>>> model = GPTNeoXJapaneseForCausalLM.from_pretrained("abeja/gpt-neox-japanese-2.7b")
>>> tokenizer = GPTNeoXJapaneseTokenizer.from_pretrained("abeja/gpt-neox-japanese-2.7b")
>>> prompt = "人とAIが協調するためには、"
>>> input_ids = tokenizer(prompt, return_tensors="pt").input_ids
>>> gen_tokens = model.generate(
... input_ids,
... do_sample=True,
... temperature=0.9,
... max_length=100,
... )
>>> gen_text = tokenizer.batch_decode(gen_tokens, skip_special_tokens=True)[0]
>>> print(gen_text)
人とAIが協調するためには、AIと人が共存し、AIを正しく理解する必要があります。
```
## Resources
- [Causal language modeling task guide](../tasks/language_modeling)
## GPTNeoXJapaneseConfig
[[autodoc]] GPTNeoXJapaneseConfig
## GPTNeoXJapaneseTokenizer
[[autodoc]] GPTNeoXJapaneseTokenizer
## GPTNeoXJapaneseModel
[[autodoc]] GPTNeoXJapaneseModel
- forward
## GPTNeoXJapaneseForCausalLM
[[autodoc]] GPTNeoXJapaneseForCausalLM
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/deberta.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# DeBERTa
## Overview
The DeBERTa model was proposed in [DeBERTa: Decoding-enhanced BERT with Disentangled Attention](https://arxiv.org/abs/2006.03654) by Pengcheng He, Xiaodong Liu, Jianfeng Gao, Weizhu Chen It is based on Google's
BERT model released in 2018 and Facebook's RoBERTa model released in 2019.
It builds on RoBERTa with disentangled attention and enhanced mask decoder training with half of the data used in
RoBERTa.
The abstract from the paper is the following:
*Recent progress in pre-trained neural language models has significantly improved the performance of many natural
language processing (NLP) tasks. In this paper we propose a new model architecture DeBERTa (Decoding-enhanced BERT with
disentangled attention) that improves the BERT and RoBERTa models using two novel techniques. The first is the
disentangled attention mechanism, where each word is represented using two vectors that encode its content and
position, respectively, and the attention weights among words are computed using disentangled matrices on their
contents and relative positions. Second, an enhanced mask decoder is used to replace the output softmax layer to
predict the masked tokens for model pretraining. We show that these two techniques significantly improve the efficiency
of model pretraining and performance of downstream tasks. Compared to RoBERTa-Large, a DeBERTa model trained on half of
the training data performs consistently better on a wide range of NLP tasks, achieving improvements on MNLI by +0.9%
(90.2% vs. 91.1%), on SQuAD v2.0 by +2.3% (88.4% vs. 90.7%) and RACE by +3.6% (83.2% vs. 86.8%). The DeBERTa code and
pre-trained models will be made publicly available at https://github.com/microsoft/DeBERTa.*
This model was contributed by [DeBERTa](https://huggingface.co/DeBERTa). This model TF 2.0 implementation was
contributed by [kamalkraj](https://huggingface.co/kamalkraj) . The original code can be found [here](https://github.com/microsoft/DeBERTa).
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with DeBERTa. If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
<PipelineTag pipeline="text-classification"/>
- A blog post on how to [Accelerate Large Model Training using DeepSpeed](https://huggingface.co/blog/accelerate-deepspeed) with DeBERTa.
- A blog post on [Supercharged Customer Service with Machine Learning](https://huggingface.co/blog/supercharge-customer-service-with-machine-learning) with DeBERTa.
- [`DebertaForSequenceClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/text-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification.ipynb).
- [`TFDebertaForSequenceClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/text-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification-tf.ipynb).
- [Text classification task guide](../tasks/sequence_classification)
<PipelineTag pipeline="token-classification" />
- [`DebertaForTokenClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/token-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/token_classification.ipynb).
- [`TFDebertaForTokenClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/token-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/token_classification-tf.ipynb).
- [Token classification](https://huggingface.co/course/chapter7/2?fw=pt) chapter of the 🤗 Hugging Face Course.
- [Byte-Pair Encoding tokenization](https://huggingface.co/course/chapter6/5?fw=pt) chapter of the 🤗 Hugging Face Course.
- [Token classification task guide](../tasks/token_classification)
<PipelineTag pipeline="fill-mask"/>
- [`DebertaForMaskedLM`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/language-modeling#robertabertdistilbert-and-masked-language-modeling) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling.ipynb).
- [`TFDebertaForMaskedLM`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/language-modeling#run_mlmpy) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling-tf.ipynb).
- [Masked language modeling](https://huggingface.co/course/chapter7/3?fw=pt) chapter of the 🤗 Hugging Face Course.
- [Masked language modeling task guide](../tasks/masked_language_modeling)
<PipelineTag pipeline="question-answering"/>
- [`DebertaForQuestionAnswering`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/question-answering) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/question_answering.ipynb).
- [`TFDebertaForQuestionAnswering`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/question-answering) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/question_answering-tf.ipynb).
- [Question answering](https://huggingface.co/course/chapter7/7?fw=pt) chapter of the 🤗 Hugging Face Course.
- [Question answering task guide](../tasks/question_answering)
## DebertaConfig
[[autodoc]] DebertaConfig
## DebertaTokenizer
[[autodoc]] DebertaTokenizer
- build_inputs_with_special_tokens
- get_special_tokens_mask
- create_token_type_ids_from_sequences
- save_vocabulary
## DebertaTokenizerFast
[[autodoc]] DebertaTokenizerFast
- build_inputs_with_special_tokens
- create_token_type_ids_from_sequences
<frameworkcontent>
<pt>
## DebertaModel
[[autodoc]] DebertaModel
- forward
## DebertaPreTrainedModel
[[autodoc]] DebertaPreTrainedModel
## DebertaForMaskedLM
[[autodoc]] DebertaForMaskedLM
- forward
## DebertaForSequenceClassification
[[autodoc]] DebertaForSequenceClassification
- forward
## DebertaForTokenClassification
[[autodoc]] DebertaForTokenClassification
- forward
## DebertaForQuestionAnswering
[[autodoc]] DebertaForQuestionAnswering
- forward
</pt>
<tf>
## TFDebertaModel
[[autodoc]] TFDebertaModel
- call
## TFDebertaPreTrainedModel
[[autodoc]] TFDebertaPreTrainedModel
- call
## TFDebertaForMaskedLM
[[autodoc]] TFDebertaForMaskedLM
- call
## TFDebertaForSequenceClassification
[[autodoc]] TFDebertaForSequenceClassification
- call
## TFDebertaForTokenClassification
[[autodoc]] TFDebertaForTokenClassification
- call
## TFDebertaForQuestionAnswering
[[autodoc]] TFDebertaForQuestionAnswering
- call
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/dinov2.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
-->
# DINOv2
## Overview
The DINOv2 model was proposed in [DINOv2: Learning Robust Visual Features without Supervision](https://arxiv.org/abs/2304.07193) by
Maxime Oquab, Timothée Darcet, Théo Moutakanni, Huy Vo, Marc Szafraniec, Vasil Khalidov, Pierre Fernandez, Daniel Haziza, Francisco Massa, Alaaeldin El-Nouby, Mahmoud Assran, Nicolas Ballas, Wojciech Galuba, Russell Howes, Po-Yao Huang, Shang-Wen Li, Ishan Misra, Michael Rabbat, Vasu Sharma, Gabriel Synnaeve, Hu Xu, Hervé Jegou, Julien Mairal, Patrick Labatut, Armand Joulin, Piotr Bojanowski.
DINOv2 is an upgrade of [DINO](https://arxiv.org/abs/2104.14294), a self-supervised method applied on [Vision Transformers](vit). This method enables all-purpose visual features, i.e., features that work across image distributions and tasks without finetuning.
The abstract from the paper is the following:
*The recent breakthroughs in natural language processing for model pretraining on large quantities of data have opened the way for similar foundation models in computer vision. These models could greatly simplify the use of images in any system by producing all-purpose visual features, i.e., features that work across image distributions and tasks without finetuning. This work shows that existing pretraining methods, especially self-supervised methods, can produce such features if trained on enough curated data from diverse sources. We revisit existing approaches and combine different techniques to scale our pretraining in terms of data and model size. Most of the technical contributions aim at accelerating and stabilizing the training at scale. In terms of data, we propose an automatic pipeline to build a dedicated, diverse, and curated image dataset instead of uncurated data, as typically done in the self-supervised literature. In terms of models, we train a ViT model (Dosovitskiy et al., 2020) with 1B parameters and distill it into a series of smaller models that surpass the best available all-purpose features, OpenCLIP (Ilharco et al., 2021) on most of the benchmarks at image and pixel levels.*
This model was contributed by [nielsr](https://huggingface.co/nielsr).
The original code can be found [here](https://github.com/facebookresearch/dinov2).
## Usage tips
The model can be traced using `torch.jit.trace` which leverages JIT compilation to optimize the model making it faster to run. Note this still produces some mis-matched elements and the difference between the original model and the traced model is of the order of 1e-4.
```python
import torch
from transformers import AutoImageProcessor, AutoModel
from PIL import Image
import requests
url = 'http://images.cocodataset.org/val2017/000000039769.jpg'
image = Image.open(requests.get(url, stream=True).raw)
processor = AutoImageProcessor.from_pretrained('facebook/dinov2-base')
model = AutoModel.from_pretrained('facebook/dinov2-base')
inputs = processor(images=image, return_tensors="pt")
outputs = model(**inputs)
last_hidden_states = outputs[0]
# We have to force return_dict=False for tracing
model.config.return_dict = False
with torch.no_grad():
traced_model = torch.jit.trace(model, [inputs.pixel_values])
traced_outputs = traced_model(inputs.pixel_values)
print((last_hidden_states - traced_outputs[0]).abs().max())
```
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with DPT.
- Demo notebooks for DINOv2 can be found [here](https://github.com/NielsRogge/Transformers-Tutorials/tree/master/DINOv2). 🌎
<PipelineTag pipeline="image-classification"/>
- [`Dinov2ForImageClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/image-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/image_classification.ipynb).
- See also: [Image classification task guide](../tasks/image_classification)
If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
## Dinov2Config
[[autodoc]] Dinov2Config
## Dinov2Model
[[autodoc]] Dinov2Model
- forward
## Dinov2ForImageClassification
[[autodoc]] Dinov2ForImageClassification
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/dialogpt.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# DialoGPT
## Overview
DialoGPT was proposed in [DialoGPT: Large-Scale Generative Pre-training for Conversational Response Generation](https://arxiv.org/abs/1911.00536) by Yizhe Zhang, Siqi Sun, Michel Galley, Yen-Chun Chen, Chris Brockett, Xiang Gao,
Jianfeng Gao, Jingjing Liu, Bill Dolan. It's a GPT2 Model trained on 147M conversation-like exchanges extracted from
Reddit.
The abstract from the paper is the following:
*We present a large, tunable neural conversational response generation model, DialoGPT (dialogue generative pre-trained
transformer). Trained on 147M conversation-like exchanges extracted from Reddit comment chains over a period spanning
from 2005 through 2017, DialoGPT extends the Hugging Face PyTorch transformer to attain a performance close to human
both in terms of automatic and human evaluation in single-turn dialogue settings. We show that conversational systems
that leverage DialoGPT generate more relevant, contentful and context-consistent responses than strong baseline
systems. The pre-trained model and training pipeline are publicly released to facilitate research into neural response
generation and the development of more intelligent open-domain dialogue systems.*
The original code can be found [here](https://github.com/microsoft/DialoGPT).
## Usage tips
- DialoGPT is a model with absolute position embeddings so it's usually advised to pad the inputs on the right rather
than the left.
- DialoGPT was trained with a causal language modeling (CLM) objective on conversational data and is therefore powerful
at response generation in open-domain dialogue systems.
- DialoGPT enables the user to create a chat bot in just 10 lines of code as shown on [DialoGPT's model card](https://huggingface.co/microsoft/DialoGPT-medium).
Training:
In order to train or fine-tune DialoGPT, one can use causal language modeling training. To cite the official paper: *We
follow the OpenAI GPT-2 to model a multiturn dialogue session as a long text and frame the generation task as language
modeling. We first concatenate all dialog turns within a dialogue session into a long text x_1,..., x_N (N is the
sequence length), ended by the end-of-text token.* For more information please confer to the original paper.
<Tip>
DialoGPT's architecture is based on the GPT2 model, refer to [GPT2's documentation page](gpt2) for API reference and examples.
</Tip>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/vivit.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
-->
# Video Vision Transformer (ViViT)
## Overview
The Vivit model was proposed in [ViViT: A Video Vision Transformer](https://arxiv.org/abs/2103.15691) by Anurag Arnab, Mostafa Dehghani, Georg Heigold, Chen Sun, Mario Lučić, Cordelia Schmid.
The paper proposes one of the first successful pure-transformer based set of models for video understanding.
The abstract from the paper is the following:
*We present pure-transformer based models for video classification, drawing upon the recent success of such models in image classification. Our model extracts spatio-temporal tokens from the input video, which are then encoded by a series of transformer layers. In order to handle the long sequences of tokens encountered in video, we propose several, efficient variants of our model which factorise the spatial- and temporal-dimensions of the input. Although transformer-based models are known to only be effective when large training datasets are available, we show how we can effectively regularise the model during training and leverage pretrained image models to be able to train on comparatively small datasets. We conduct thorough ablation studies, and achieve state-of-the-art results on multiple video classification benchmarks including Kinetics 400 and 600, Epic Kitchens, Something-Something v2 and Moments in Time, outperforming prior methods based on deep 3D convolutional networks.*
This model was contributed by [jegormeister](https://huggingface.co/jegormeister). The original code (written in JAX) can be found [here](https://github.com/google-research/scenic/tree/main/scenic/projects/vivit).
## VivitConfig
[[autodoc]] VivitConfig
## VivitImageProcessor
[[autodoc]] VivitImageProcessor
- preprocess
## VivitModel
[[autodoc]] VivitModel
- forward
## VivitForVideoClassification
[[autodoc]] transformers.VivitForVideoClassification
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/wavlm.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# WavLM
## Overview
The WavLM model was proposed in [WavLM: Large-Scale Self-Supervised Pre-Training for Full Stack Speech Processing](https://arxiv.org/abs/2110.13900) by Sanyuan Chen, Chengyi Wang, Zhengyang Chen, Yu Wu, Shujie Liu, Zhuo Chen,
Jinyu Li, Naoyuki Kanda, Takuya Yoshioka, Xiong Xiao, Jian Wu, Long Zhou, Shuo Ren, Yanmin Qian, Yao Qian, Jian Wu,
Michael Zeng, Furu Wei.
The abstract from the paper is the following:
*Self-supervised learning (SSL) achieves great success in speech recognition, while limited exploration has been
attempted for other speech processing tasks. As speech signal contains multi-faceted information including speaker
identity, paralinguistics, spoken content, etc., learning universal representations for all speech tasks is
challenging. In this paper, we propose a new pre-trained model, WavLM, to solve full-stack downstream speech tasks.
WavLM is built based on the HuBERT framework, with an emphasis on both spoken content modeling and speaker identity
preservation. We first equip the Transformer structure with gated relative position bias to improve its capability on
recognition tasks. For better speaker discrimination, we propose an utterance mixing training strategy, where
additional overlapped utterances are created unsupervisely and incorporated during model training. Lastly, we scale up
the training dataset from 60k hours to 94k hours. WavLM Large achieves state-of-the-art performance on the SUPERB
benchmark, and brings significant improvements for various speech processing tasks on their representative benchmarks.*
Relevant checkpoints can be found under https://huggingface.co/models?other=wavlm.
This model was contributed by [patrickvonplaten](https://huggingface.co/patrickvonplaten). The Authors' code can be
found [here](https://github.com/microsoft/unilm/tree/master/wavlm).
## Usage tips
- WavLM is a speech model that accepts a float array corresponding to the raw waveform of the speech signal. Please use
[`Wav2Vec2Processor`] for the feature extraction.
- WavLM model can be fine-tuned using connectionist temporal classification (CTC) so the model output has to be decoded
using [`Wav2Vec2CTCTokenizer`].
- WavLM performs especially well on speaker verification, speaker identification, and speaker diarization tasks.
## Resources
- [Audio classification task guide](../tasks/audio_classification)
- [Automatic speech recognition task guide](../tasks/asr)
## WavLMConfig
[[autodoc]] WavLMConfig
## WavLMModel
[[autodoc]] WavLMModel
- forward
## WavLMForCTC
[[autodoc]] WavLMForCTC
- forward
## WavLMForSequenceClassification
[[autodoc]] WavLMForSequenceClassification
- forward
## WavLMForAudioFrameClassification
[[autodoc]] WavLMForAudioFrameClassification
- forward
## WavLMForXVector
[[autodoc]] WavLMForXVector
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/perceiver.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Perceiver
## Overview
The Perceiver IO model was proposed in [Perceiver IO: A General Architecture for Structured Inputs &
Outputs](https://arxiv.org/abs/2107.14795) by Andrew Jaegle, Sebastian Borgeaud, Jean-Baptiste Alayrac, Carl Doersch,
Catalin Ionescu, David Ding, Skanda Koppula, Daniel Zoran, Andrew Brock, Evan Shelhamer, Olivier Hénaff, Matthew M.
Botvinick, Andrew Zisserman, Oriol Vinyals, João Carreira.
Perceiver IO is a generalization of [Perceiver](https://arxiv.org/abs/2103.03206) to handle arbitrary outputs in
addition to arbitrary inputs. The original Perceiver only produced a single classification label. In addition to
classification labels, Perceiver IO can produce (for example) language, optical flow, and multimodal videos with audio.
This is done using the same building blocks as the original Perceiver. The computational complexity of Perceiver IO is
linear in the input and output size and the bulk of the processing occurs in the latent space, allowing us to process
inputs and outputs that are much larger than can be handled by standard Transformers. This means, for example,
Perceiver IO can do BERT-style masked language modeling directly using bytes instead of tokenized inputs.
The abstract from the paper is the following:
*The recently-proposed Perceiver model obtains good results on several domains (images, audio, multimodal, point
clouds) while scaling linearly in compute and memory with the input size. While the Perceiver supports many kinds of
inputs, it can only produce very simple outputs such as class scores. Perceiver IO overcomes this limitation without
sacrificing the original's appealing properties by learning to flexibly query the model's latent space to produce
outputs of arbitrary size and semantics. Perceiver IO still decouples model depth from data size and still scales
linearly with data size, but now with respect to both input and output sizes. The full Perceiver IO model achieves
strong results on tasks with highly structured output spaces, such as natural language and visual understanding,
StarCraft II, and multi-task and multi-modal domains. As highlights, Perceiver IO matches a Transformer-based BERT
baseline on the GLUE language benchmark without the need for input tokenization and achieves state-of-the-art
performance on Sintel optical flow estimation.*
Here's a TLDR explaining how Perceiver works:
The main problem with the self-attention mechanism of the Transformer is that the time and memory requirements scale
quadratically with the sequence length. Hence, models like BERT and RoBERTa are limited to a max sequence length of 512
tokens. Perceiver aims to solve this issue by, instead of performing self-attention on the inputs, perform it on a set
of latent variables, and only use the inputs for cross-attention. In this way, the time and memory requirements don't
depend on the length of the inputs anymore, as one uses a fixed amount of latent variables, like 256 or 512. These are
randomly initialized, after which they are trained end-to-end using backpropagation.
Internally, [`PerceiverModel`] will create the latents, which is a tensor of shape `(batch_size, num_latents,
d_latents)`. One must provide `inputs` (which could be text, images, audio, you name it!) to the model, which it will
use to perform cross-attention with the latents. The output of the Perceiver encoder is a tensor of the same shape. One
can then, similar to BERT, convert the last hidden states of the latents to classification logits by averaging along
the sequence dimension, and placing a linear layer on top of that to project the `d_latents` to `num_labels`.
This was the idea of the original Perceiver paper. However, it could only output classification logits. In a follow-up
work, PerceiverIO, they generalized it to let the model also produce outputs of arbitrary size. How, you might ask? The
idea is actually relatively simple: one defines outputs of an arbitrary size, and then applies cross-attention with the
last hidden states of the latents, using the outputs as queries, and the latents as keys and values.
So let's say one wants to perform masked language modeling (BERT-style) with the Perceiver. As the Perceiver's input
length will not have an impact on the computation time of the self-attention layers, one can provide raw bytes,
providing `inputs` of length 2048 to the model. If one now masks out certain of these 2048 tokens, one can define the
`outputs` as being of shape: `(batch_size, 2048, 768)`. Next, one performs cross-attention with the final hidden states
of the latents to update the `outputs` tensor. After cross-attention, one still has a tensor of shape `(batch_size,
2048, 768)`. One can then place a regular language modeling head on top, to project the last dimension to the
vocabulary size of the model, i.e. creating logits of shape `(batch_size, 2048, 262)` (as Perceiver uses a vocabulary
size of 262 byte IDs).
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/perceiver_architecture.jpg"
alt="drawing" width="600"/>
<small> Perceiver IO architecture. Taken from the <a href="https://arxiv.org/abs/2105.15203">original paper</a> </small>
This model was contributed by [nielsr](https://huggingface.co/nielsr). The original code can be found
[here](https://github.com/deepmind/deepmind-research/tree/master/perceiver).
<Tip warning={true}>
Perceiver does **not** work with `torch.nn.DataParallel` due to a bug in PyTorch, see [issue #36035](https://github.com/pytorch/pytorch/issues/36035)
</Tip>
## Resources
- The quickest way to get started with the Perceiver is by checking the [tutorial
notebooks](https://github.com/NielsRogge/Transformers-Tutorials/tree/master/Perceiver).
- Refer to the [blog post](https://huggingface.co/blog/perceiver) if you want to fully understand how the model works and
is implemented in the library. Note that the models available in the library only showcase some examples of what you can do
with the Perceiver. There are many more use cases, including question answering, named-entity recognition, object detection,
audio classification, video classification, etc.
- [Text classification task guide](../tasks/sequence_classification)
- [Masked language modeling task guide](../tasks/masked_language_modeling)
- [Image classification task guide](../tasks/image_classification)
## Perceiver specific outputs
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverModelOutput
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverDecoderOutput
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverMaskedLMOutput
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverClassifierOutput
## PerceiverConfig
[[autodoc]] PerceiverConfig
## PerceiverTokenizer
[[autodoc]] PerceiverTokenizer
- __call__
## PerceiverFeatureExtractor
[[autodoc]] PerceiverFeatureExtractor
- __call__
## PerceiverImageProcessor
[[autodoc]] PerceiverImageProcessor
- preprocess
## PerceiverTextPreprocessor
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverTextPreprocessor
## PerceiverImagePreprocessor
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverImagePreprocessor
## PerceiverOneHotPreprocessor
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverOneHotPreprocessor
## PerceiverAudioPreprocessor
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverAudioPreprocessor
## PerceiverMultimodalPreprocessor
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverMultimodalPreprocessor
## PerceiverProjectionDecoder
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverProjectionDecoder
## PerceiverBasicDecoder
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverBasicDecoder
## PerceiverClassificationDecoder
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverClassificationDecoder
## PerceiverOpticalFlowDecoder
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverOpticalFlowDecoder
## PerceiverBasicVideoAutoencodingDecoder
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverBasicVideoAutoencodingDecoder
## PerceiverMultimodalDecoder
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverMultimodalDecoder
## PerceiverProjectionPostprocessor
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverProjectionPostprocessor
## PerceiverAudioPostprocessor
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverAudioPostprocessor
## PerceiverClassificationPostprocessor
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverClassificationPostprocessor
## PerceiverMultimodalPostprocessor
[[autodoc]] models.perceiver.modeling_perceiver.PerceiverMultimodalPostprocessor
## PerceiverModel
[[autodoc]] PerceiverModel
- forward
## PerceiverForMaskedLM
[[autodoc]] PerceiverForMaskedLM
- forward
## PerceiverForSequenceClassification
[[autodoc]] PerceiverForSequenceClassification
- forward
## PerceiverForImageClassificationLearned
[[autodoc]] PerceiverForImageClassificationLearned
- forward
## PerceiverForImageClassificationFourier
[[autodoc]] PerceiverForImageClassificationFourier
- forward
## PerceiverForImageClassificationConvProcessing
[[autodoc]] PerceiverForImageClassificationConvProcessing
- forward
## PerceiverForOpticalFlow
[[autodoc]] PerceiverForOpticalFlow
- forward
## PerceiverForMultimodalAutoencoding
[[autodoc]] PerceiverForMultimodalAutoencoding
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/segformer.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# SegFormer
## Overview
The SegFormer model was proposed in [SegFormer: Simple and Efficient Design for Semantic Segmentation with Transformers](https://arxiv.org/abs/2105.15203) by Enze Xie, Wenhai Wang, Zhiding Yu, Anima Anandkumar, Jose M. Alvarez, Ping
Luo. The model consists of a hierarchical Transformer encoder and a lightweight all-MLP decode head to achieve great
results on image segmentation benchmarks such as ADE20K and Cityscapes.
The abstract from the paper is the following:
*We present SegFormer, a simple, efficient yet powerful semantic segmentation framework which unifies Transformers with
lightweight multilayer perception (MLP) decoders. SegFormer has two appealing features: 1) SegFormer comprises a novel
hierarchically structured Transformer encoder which outputs multiscale features. It does not need positional encoding,
thereby avoiding the interpolation of positional codes which leads to decreased performance when the testing resolution
differs from training. 2) SegFormer avoids complex decoders. The proposed MLP decoder aggregates information from
different layers, and thus combining both local attention and global attention to render powerful representations. We
show that this simple and lightweight design is the key to efficient segmentation on Transformers. We scale our
approach up to obtain a series of models from SegFormer-B0 to SegFormer-B5, reaching significantly better performance
and efficiency than previous counterparts. For example, SegFormer-B4 achieves 50.3% mIoU on ADE20K with 64M parameters,
being 5x smaller and 2.2% better than the previous best method. Our best model, SegFormer-B5, achieves 84.0% mIoU on
Cityscapes validation set and shows excellent zero-shot robustness on Cityscapes-C.*
The figure below illustrates the architecture of SegFormer. Taken from the [original paper](https://arxiv.org/abs/2105.15203).
<img width="600" src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/segformer_architecture.png"/>
This model was contributed by [nielsr](https://huggingface.co/nielsr). The TensorFlow version
of the model was contributed by [sayakpaul](https://huggingface.co/sayakpaul). The original code can be found [here](https://github.com/NVlabs/SegFormer).
## Usage tips
- SegFormer consists of a hierarchical Transformer encoder, and a lightweight all-MLP decoder head.
[`SegformerModel`] is the hierarchical Transformer encoder (which in the paper is also referred to
as Mix Transformer or MiT). [`SegformerForSemanticSegmentation`] adds the all-MLP decoder head on
top to perform semantic segmentation of images. In addition, there's
[`SegformerForImageClassification`] which can be used to - you guessed it - classify images. The
authors of SegFormer first pre-trained the Transformer encoder on ImageNet-1k to classify images. Next, they throw
away the classification head, and replace it by the all-MLP decode head. Next, they fine-tune the model altogether on
ADE20K, Cityscapes and COCO-stuff, which are important benchmarks for semantic segmentation. All checkpoints can be
found on the [hub](https://huggingface.co/models?other=segformer).
- The quickest way to get started with SegFormer is by checking the [example notebooks](https://github.com/NielsRogge/Transformers-Tutorials/tree/master/SegFormer) (which showcase both inference and
fine-tuning on custom data). One can also check out the [blog post](https://huggingface.co/blog/fine-tune-segformer) introducing SegFormer and illustrating how it can be fine-tuned on custom data.
- TensorFlow users should refer to [this repository](https://github.com/deep-diver/segformer-tf-transformers) that shows off-the-shelf inference and fine-tuning.
- One can also check out [this interactive demo on Hugging Face Spaces](https://huggingface.co/spaces/chansung/segformer-tf-transformers)
to try out a SegFormer model on custom images.
- SegFormer works on any input size, as it pads the input to be divisible by `config.patch_sizes`.
- One can use [`SegformerImageProcessor`] to prepare images and corresponding segmentation maps
for the model. Note that this image processor is fairly basic and does not include all data augmentations used in
the original paper. The original preprocessing pipelines (for the ADE20k dataset for instance) can be found [here](https://github.com/NVlabs/SegFormer/blob/master/local_configs/_base_/datasets/ade20k_repeat.py). The most
important preprocessing step is that images and segmentation maps are randomly cropped and padded to the same size,
such as 512x512 or 640x640, after which they are normalized.
- One additional thing to keep in mind is that one can initialize [`SegformerImageProcessor`] with
`reduce_labels` set to `True` or `False`. In some datasets (like ADE20k), the 0 index is used in the annotated
segmentation maps for background. However, ADE20k doesn't include the "background" class in its 150 labels.
Therefore, `reduce_labels` is used to reduce all labels by 1, and to make sure no loss is computed for the
background class (i.e. it replaces 0 in the annotated maps by 255, which is the *ignore_index* of the loss function
used by [`SegformerForSemanticSegmentation`]). However, other datasets use the 0 index as
background class and include this class as part of all labels. In that case, `reduce_labels` should be set to
`False`, as loss should also be computed for the background class.
- As most models, SegFormer comes in different sizes, the details of which can be found in the table below
(taken from Table 7 of the [original paper](https://arxiv.org/abs/2105.15203)).
| **Model variant** | **Depths** | **Hidden sizes** | **Decoder hidden size** | **Params (M)** | **ImageNet-1k Top 1** |
| :---------------: | ------------- | ------------------- | :---------------------: | :------------: | :-------------------: |
| MiT-b0 | [2, 2, 2, 2] | [32, 64, 160, 256] | 256 | 3.7 | 70.5 |
| MiT-b1 | [2, 2, 2, 2] | [64, 128, 320, 512] | 256 | 14.0 | 78.7 |
| MiT-b2 | [3, 4, 6, 3] | [64, 128, 320, 512] | 768 | 25.4 | 81.6 |
| MiT-b3 | [3, 4, 18, 3] | [64, 128, 320, 512] | 768 | 45.2 | 83.1 |
| MiT-b4 | [3, 8, 27, 3] | [64, 128, 320, 512] | 768 | 62.6 | 83.6 |
| MiT-b5 | [3, 6, 40, 3] | [64, 128, 320, 512] | 768 | 82.0 | 83.8 |
Note that MiT in the above table refers to the Mix Transformer encoder backbone introduced in SegFormer. For
SegFormer's results on the segmentation datasets like ADE20k, refer to the [paper](https://arxiv.org/abs/2105.15203).
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with SegFormer.
<PipelineTag pipeline="image-classification"/>
- [`SegformerForImageClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/image-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/image_classification.ipynb).
- [Image classification task guide](../tasks/image_classification)
Semantic segmentation:
- [`SegformerForSemanticSegmentation`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/semantic-segmentation).
- A blog on fine-tuning SegFormer on a custom dataset can be found [here](https://huggingface.co/blog/fine-tune-segformer).
- More demo notebooks on SegFormer (both inference + fine-tuning on a custom dataset) can be found [here](https://github.com/NielsRogge/Transformers-Tutorials/tree/master/SegFormer).
- [`TFSegformerForSemanticSegmentation`] is supported by this [example notebook](https://github.com/huggingface/notebooks/blob/main/examples/semantic_segmentation-tf.ipynb).
- [Semantic segmentation task guide](../tasks/semantic_segmentation)
If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
## SegformerConfig
[[autodoc]] SegformerConfig
## SegformerFeatureExtractor
[[autodoc]] SegformerFeatureExtractor
- __call__
- post_process_semantic_segmentation
## SegformerImageProcessor
[[autodoc]] SegformerImageProcessor
- preprocess
- post_process_semantic_segmentation
<frameworkcontent>
<pt>
## SegformerModel
[[autodoc]] SegformerModel
- forward
## SegformerDecodeHead
[[autodoc]] SegformerDecodeHead
- forward
## SegformerForImageClassification
[[autodoc]] SegformerForImageClassification
- forward
## SegformerForSemanticSegmentation
[[autodoc]] SegformerForSemanticSegmentation
- forward
</pt>
<tf>
## TFSegformerDecodeHead
[[autodoc]] TFSegformerDecodeHead
- call
## TFSegformerModel
[[autodoc]] TFSegformerModel
- call
## TFSegformerForImageClassification
[[autodoc]] TFSegformerForImageClassification
- call
## TFSegformerForSemanticSegmentation
[[autodoc]] TFSegformerForSemanticSegmentation
- call
</tf>
</frameworkcontent> | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/owlvit.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# OWL-ViT
## Overview
The OWL-ViT (short for Vision Transformer for Open-World Localization) was proposed in [Simple Open-Vocabulary Object Detection with Vision Transformers](https://arxiv.org/abs/2205.06230) by Matthias Minderer, Alexey Gritsenko, Austin Stone, Maxim Neumann, Dirk Weissenborn, Alexey Dosovitskiy, Aravindh Mahendran, Anurag Arnab, Mostafa Dehghani, Zhuoran Shen, Xiao Wang, Xiaohua Zhai, Thomas Kipf, and Neil Houlsby. OWL-ViT is an open-vocabulary object detection network trained on a variety of (image, text) pairs. It can be used to query an image with one or multiple text queries to search for and detect target objects described in text.
The abstract from the paper is the following:
*Combining simple architectures with large-scale pre-training has led to massive improvements in image classification. For object detection, pre-training and scaling approaches are less well established, especially in the long-tailed and open-vocabulary setting, where training data is relatively scarce. In this paper, we propose a strong recipe for transferring image-text models to open-vocabulary object detection. We use a standard Vision Transformer architecture with minimal modifications, contrastive image-text pre-training, and end-to-end detection fine-tuning. Our analysis of the scaling properties of this setup shows that increasing image-level pre-training and model size yield consistent improvements on the downstream detection task. We provide the adaptation strategies and regularizations needed to attain very strong performance on zero-shot text-conditioned and one-shot image-conditioned object detection. Code and models are available on GitHub.*
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/model_doc/owlvit_architecture.jpg"
alt="drawing" width="600"/>
<small> OWL-ViT architecture. Taken from the <a href="https://arxiv.org/abs/2205.06230">original paper</a>. </small>
This model was contributed by [adirik](https://huggingface.co/adirik). The original code can be found [here](https://github.com/google-research/scenic/tree/main/scenic/projects/owl_vit).
## Usage tips
OWL-ViT is a zero-shot text-conditioned object detection model. OWL-ViT uses [CLIP](clip) as its multi-modal backbone, with a ViT-like Transformer to get visual features and a causal language model to get the text features. To use CLIP for detection, OWL-ViT removes the final token pooling layer of the vision model and attaches a lightweight classification and box head to each transformer output token. Open-vocabulary classification is enabled by replacing the fixed classification layer weights with the class-name embeddings obtained from the text model. The authors first train CLIP from scratch and fine-tune it end-to-end with the classification and box heads on standard detection datasets using a bipartite matching loss. One or multiple text queries per image can be used to perform zero-shot text-conditioned object detection.
[`OwlViTImageProcessor`] can be used to resize (or rescale) and normalize images for the model and [`CLIPTokenizer`] is used to encode the text. [`OwlViTProcessor`] wraps [`OwlViTImageProcessor`] and [`CLIPTokenizer`] into a single instance to both encode the text and prepare the images. The following example shows how to perform object detection using [`OwlViTProcessor`] and [`OwlViTForObjectDetection`].
```python
>>> import requests
>>> from PIL import Image
>>> import torch
>>> from transformers import OwlViTProcessor, OwlViTForObjectDetection
>>> processor = OwlViTProcessor.from_pretrained("google/owlvit-base-patch32")
>>> model = OwlViTForObjectDetection.from_pretrained("google/owlvit-base-patch32")
>>> url = "http://images.cocodataset.org/val2017/000000039769.jpg"
>>> image = Image.open(requests.get(url, stream=True).raw)
>>> texts = [["a photo of a cat", "a photo of a dog"]]
>>> inputs = processor(text=texts, images=image, return_tensors="pt")
>>> outputs = model(**inputs)
>>> # Target image sizes (height, width) to rescale box predictions [batch_size, 2]
>>> target_sizes = torch.Tensor([image.size[::-1]])
>>> # Convert outputs (bounding boxes and class logits) to Pascal VOC format (xmin, ymin, xmax, ymax)
>>> results = processor.post_process_object_detection(outputs=outputs, target_sizes=target_sizes, threshold=0.1)
>>> i = 0 # Retrieve predictions for the first image for the corresponding text queries
>>> text = texts[i]
>>> boxes, scores, labels = results[i]["boxes"], results[i]["scores"], results[i]["labels"]
>>> for box, score, label in zip(boxes, scores, labels):
... box = [round(i, 2) for i in box.tolist()]
... print(f"Detected {text[label]} with confidence {round(score.item(), 3)} at location {box}")
Detected a photo of a cat with confidence 0.707 at location [324.97, 20.44, 640.58, 373.29]
Detected a photo of a cat with confidence 0.717 at location [1.46, 55.26, 315.55, 472.17]
```
## Resources
A demo notebook on using OWL-ViT for zero- and one-shot (image-guided) object detection can be found [here](https://github.com/huggingface/notebooks/blob/main/examples/zeroshot_object_detection_with_owlvit.ipynb).
## OwlViTConfig
[[autodoc]] OwlViTConfig
- from_text_vision_configs
## OwlViTTextConfig
[[autodoc]] OwlViTTextConfig
## OwlViTVisionConfig
[[autodoc]] OwlViTVisionConfig
## OwlViTImageProcessor
[[autodoc]] OwlViTImageProcessor
- preprocess
- post_process_object_detection
- post_process_image_guided_detection
## OwlViTFeatureExtractor
[[autodoc]] OwlViTFeatureExtractor
- __call__
- post_process
- post_process_image_guided_detection
## OwlViTProcessor
[[autodoc]] OwlViTProcessor
## OwlViTModel
[[autodoc]] OwlViTModel
- forward
- get_text_features
- get_image_features
## OwlViTTextModel
[[autodoc]] OwlViTTextModel
- forward
## OwlViTVisionModel
[[autodoc]] OwlViTVisionModel
- forward
## OwlViTForObjectDetection
[[autodoc]] OwlViTForObjectDetection
- forward
- image_guided_detection
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/mistral.md | <!--Copyright 2023 Mistral AI and The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Mistral
## Overview
Mistral-7B-v0.1 is Mistral AI's first Large Language Model (LLM).
### Model Details
Mistral-7B-v0.1 is a decoder-based LM with the following architectural choices:
* Sliding Window Attention - Trained with 8k context length and fixed cache size, with a theoretical attention span of 128K tokens
* GQA (Grouped Query Attention) - allowing faster inference and lower cache size.
* Byte-fallback BPE tokenizer - ensures that characters are never mapped to out of vocabulary tokens.
We also provide an instruction fine-tuned model: `Mistral-7B-Instruct-v0.1` which can be used for chat-based inference.
For more details please read our [release blog post](https://mistral.ai/news/announcing-mistral-7b/)
### License
Both `Mistral-7B-v0.1` and `Mistral-7B-Instruct-v0.1` are released under the Apache 2.0 license.
## Usage tips
`Mistral-7B-v0.1` and `Mistral-7B-Instruct-v0.1` can be found on the [Huggingface Hub](https://huggingface.co/mistralai)
These ready-to-use checkpoints can be downloaded and used via the HuggingFace Hub:
```python
>>> from transformers import AutoModelForCausalLM, AutoTokenizer
>>> device = "cuda" # the device to load the model onto
>>> model = AutoModelForCausalLM.from_pretrained("mistralai/Mistral-7B-v0.1")
>>> tokenizer = AutoTokenizer.from_pretrained("mistralai/Mistral-7B-v0.1")
>>> prompt = "My favourite condiment is"
>>> model_inputs = tokenizer([prompt], return_tensors="pt").to(device)
>>> model.to(device)
>>> generated_ids = model.generate(**model_inputs, max_new_tokens=100, do_sample=True)
>>> tokenizer.batch_decode(generated_ids)[0]
"The expected output"
```
Raw weights for `Mistral-7B-v0.1` and `Mistral-7B-Instruct-v0.1` can be downloaded from:
| Model Name | Checkpoint |
|----------------------------|-----------------------------------------------------------------------------------------|
| `Mistral-7B-v0.1` | [Raw Checkpoint](https://files.mistral-7b-v0-1.mistral.ai/mistral-7B-v0.1.tar) |
| `Mistral-7B-Instruct-v0.1` | [Raw Checkpoint](https://files.mistral-7b-v0-1.mistral.ai/mistral-7B-instruct-v0.1.tar) |
To use these raw checkpoints with HuggingFace you can use the `convert_mistral_weights_to_hf.py` script to convert them to the HuggingFace format:
```bash
python src/transformers/models/mistral/convert_mistral_weights_to_hf.py \
--input_dir /path/to/downloaded/mistral/weights --model_size 7B --output_dir /output/path
```
You can then load the converted model from the `output/path`:
```python
from transformers import MistralForCausalLM, LlamaTokenizer
tokenizer = LlamaTokenizer.from_pretrained("/output/path")
model = MistralForCausalLM.from_pretrained("/output/path")
```
## Combining Mistral and Flash Attention 2
First, make sure to install the latest version of Flash Attention 2 to include the sliding window attention feature.
```bash
pip install -U flash-attn --no-build-isolation
```
Make also sure that you have a hardware that is compatible with Flash-Attention 2. Read more about it in the official documentation of [`flash-attn`](https://github.com/Dao-AILab/flash-attention) repository. Make also sure to load your model in half-precision (e.g. `torch.float16`)
To load and run a model using Flash Attention 2, refer to the snippet below:
```python
>>> import torch
>>> from transformers import AutoModelForCausalLM, AutoTokenizer
>>> device = "cuda" # the device to load the model onto
>>> model = AutoModelForCausalLM.from_pretrained("mistralai/Mistral-7B-v0.1", torch_dtype=torch.float16, attn_implementation="flash_attention_2")
>>> tokenizer = AutoTokenizer.from_pretrained("mistralai/Mistral-7B-v0.1")
>>> prompt = "My favourite condiment is"
>>> model_inputs = tokenizer([prompt], return_tensors="pt").to(device)
>>> model.to(device)
>>> generated_ids = model.generate(**model_inputs, max_new_tokens=100, do_sample=True)
>>> tokenizer.batch_decode(generated_ids)[0]
"The expected output"
```
### Expected speedups
Below is a expected speedup diagram that compares pure inference time between the native implementation in transformers using `mistralai/Mistral-7B-v0.1` checkpoint and the Flash Attention 2 version of the model.
<div style="text-align: center">
<img src="https://huggingface.co/datasets/ybelkada/documentation-images/resolve/main/mistral-7b-inference-large-seqlen.png">
</div>
### Sliding window Attention
The current implementation supports the sliding window attention mechanism and memory efficient cache management.
To enable sliding window attention, just make sure to have a `flash-attn` version that is compatible with sliding window attention (`>=2.3.0`).
The Flash Attention-2 model uses also a more memory efficient cache slicing mechanism - as recommended per the official implementation of Mistral model that use rolling cache mechanism we keep the cache size fixed (`self.config.sliding_window`), support batched generation only for `padding_side="left"` and use the absolute position of the current token to compute the positional embedding.
## The Mistral Team
Albert Jiang, Alexandre Sablayrolles, Arthur Mensch, Chris Bamford, Devendra Singh Chaplot, Diego de las Casas, Florian Bressand, Gianna Lengyel, Guillaume Lample, Lélio Renard Lavaud, Lucile Saulnier, Marie-Anne Lachaux, Pierre Stock, Teven Le Scao, Thibaut Lavril, Thomas Wang, Timothée Lacroix, William El Sayed.
## MistralConfig
[[autodoc]] MistralConfig
## MistralModel
[[autodoc]] MistralModel
- forward
## MistralForCausalLM
[[autodoc]] MistralForCausalLM
- forward
## MistralForSequenceClassification
[[autodoc]] MistralForSequenceClassification
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/rembert.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# RemBERT
## Overview
The RemBERT model was proposed in [Rethinking Embedding Coupling in Pre-trained Language Models](https://arxiv.org/abs/2010.12821) by Hyung Won Chung, Thibault Févry, Henry Tsai, Melvin Johnson, Sebastian Ruder.
The abstract from the paper is the following:
*We re-evaluate the standard practice of sharing weights between input and output embeddings in state-of-the-art
pre-trained language models. We show that decoupled embeddings provide increased modeling flexibility, allowing us to
significantly improve the efficiency of parameter allocation in the input embedding of multilingual models. By
reallocating the input embedding parameters in the Transformer layers, we achieve dramatically better performance on
standard natural language understanding tasks with the same number of parameters during fine-tuning. We also show that
allocating additional capacity to the output embedding provides benefits to the model that persist through the
fine-tuning stage even though the output embedding is discarded after pre-training. Our analysis shows that larger
output embeddings prevent the model's last layers from overspecializing to the pre-training task and encourage
Transformer representations to be more general and more transferable to other tasks and languages. Harnessing these
findings, we are able to train models that achieve strong performance on the XTREME benchmark without increasing the
number of parameters at the fine-tuning stage.*
## Usage tips
For fine-tuning, RemBERT can be thought of as a bigger version of mBERT with an ALBERT-like factorization of the
embedding layer. The embeddings are not tied in pre-training, in contrast with BERT, which enables smaller input
embeddings (preserved during fine-tuning) and bigger output embeddings (discarded at fine-tuning). The tokenizer is
also similar to the Albert one rather than the BERT one.
## Resources
- [Text classification task guide](../tasks/sequence_classification)
- [Token classification task guide](../tasks/token_classification)
- [Question answering task guide](../tasks/question_answering)
- [Causal language modeling task guide](../tasks/language_modeling)
- [Masked language modeling task guide](../tasks/masked_language_modeling)
- [Multiple choice task guide](../tasks/multiple_choice)
## RemBertConfig
[[autodoc]] RemBertConfig
## RemBertTokenizer
[[autodoc]] RemBertTokenizer
- build_inputs_with_special_tokens
- get_special_tokens_mask
- create_token_type_ids_from_sequences
- save_vocabulary
## RemBertTokenizerFast
[[autodoc]] RemBertTokenizerFast
- build_inputs_with_special_tokens
- get_special_tokens_mask
- create_token_type_ids_from_sequences
- save_vocabulary
<frameworkcontent>
<pt>
## RemBertModel
[[autodoc]] RemBertModel
- forward
## RemBertForCausalLM
[[autodoc]] RemBertForCausalLM
- forward
## RemBertForMaskedLM
[[autodoc]] RemBertForMaskedLM
- forward
## RemBertForSequenceClassification
[[autodoc]] RemBertForSequenceClassification
- forward
## RemBertForMultipleChoice
[[autodoc]] RemBertForMultipleChoice
- forward
## RemBertForTokenClassification
[[autodoc]] RemBertForTokenClassification
- forward
## RemBertForQuestionAnswering
[[autodoc]] RemBertForQuestionAnswering
- forward
</pt>
<tf>
## TFRemBertModel
[[autodoc]] TFRemBertModel
- call
## TFRemBertForMaskedLM
[[autodoc]] TFRemBertForMaskedLM
- call
## TFRemBertForCausalLM
[[autodoc]] TFRemBertForCausalLM
- call
## TFRemBertForSequenceClassification
[[autodoc]] TFRemBertForSequenceClassification
- call
## TFRemBertForMultipleChoice
[[autodoc]] TFRemBertForMultipleChoice
- call
## TFRemBertForTokenClassification
[[autodoc]] TFRemBertForTokenClassification
- call
## TFRemBertForQuestionAnswering
[[autodoc]] TFRemBertForQuestionAnswering
- call
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/roberta.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# RoBERTa
<div class="flex flex-wrap space-x-1">
<a href="https://huggingface.co/models?filter=roberta">
<img alt="Models" src="https://img.shields.io/badge/All_model_pages-roberta-blueviolet">
</a>
<a href="https://huggingface.co/spaces/docs-demos/roberta-base">
<img alt="Spaces" src="https://img.shields.io/badge/%F0%9F%A4%97%20Hugging%20Face-Spaces-blue">
</a>
<a href="https://huggingface.co/papers/1907.11692">
<img alt="Paper page" src="https://img.shields.io/badge/Paper%20page-1907.11692-green">
</a>
</div>
## Overview
The RoBERTa model was proposed in [RoBERTa: A Robustly Optimized BERT Pretraining Approach](https://arxiv.org/abs/1907.11692) by Yinhan Liu, [Myle Ott](https://huggingface.co/myleott), Naman Goyal, Jingfei Du, Mandar Joshi, Danqi Chen, Omer
Levy, Mike Lewis, Luke Zettlemoyer, Veselin Stoyanov. It is based on Google's BERT model released in 2018.
It builds on BERT and modifies key hyperparameters, removing the next-sentence pretraining objective and training with
much larger mini-batches and learning rates.
The abstract from the paper is the following:
*Language model pretraining has led to significant performance gains but careful comparison between different
approaches is challenging. Training is computationally expensive, often done on private datasets of different sizes,
and, as we will show, hyperparameter choices have significant impact on the final results. We present a replication
study of BERT pretraining (Devlin et al., 2019) that carefully measures the impact of many key hyperparameters and
training data size. We find that BERT was significantly undertrained, and can match or exceed the performance of every
model published after it. Our best model achieves state-of-the-art results on GLUE, RACE and SQuAD. These results
highlight the importance of previously overlooked design choices, and raise questions about the source of recently
reported improvements. We release our models and code.*
This model was contributed by [julien-c](https://huggingface.co/julien-c). The original code can be found [here](https://github.com/pytorch/fairseq/tree/master/examples/roberta).
## Usage tips
- This implementation is the same as [`BertModel`] with a tiny embeddings tweak as well as a setup
for Roberta pretrained models.
- RoBERTa has the same architecture as BERT, but uses a byte-level BPE as a tokenizer (same as GPT-2) and uses a
different pretraining scheme.
- RoBERTa doesn't have `token_type_ids`, you don't need to indicate which token belongs to which segment. Just
separate your segments with the separation token `tokenizer.sep_token` (or `</s>`)
- Same as BERT with better pretraining tricks:
* dynamic masking: tokens are masked differently at each epoch, whereas BERT does it once and for all
* together to reach 512 tokens (so the sentences are in an order than may span several documents)
* train with larger batches
* use BPE with bytes as a subunit and not characters (because of unicode characters)
- [CamemBERT](camembert) is a wrapper around RoBERTa. Refer to this page for usage examples.
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with RoBERTa. If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
<PipelineTag pipeline="text-classification"/>
- A blog on [Getting Started with Sentiment Analysis on Twitter](https://huggingface.co/blog/sentiment-analysis-twitter) using RoBERTa and the [Inference API](https://huggingface.co/inference-api).
- A blog on [Opinion Classification with Kili and Hugging Face AutoTrain](https://huggingface.co/blog/opinion-classification-with-kili) using RoBERTa.
- A notebook on how to [finetune RoBERTa for sentiment analysis](https://colab.research.google.com/github/DhavalTaunk08/NLP_scripts/blob/master/sentiment_analysis_using_roberta.ipynb). 🌎
- [`RobertaForSequenceClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/text-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification.ipynb).
- [`TFRobertaForSequenceClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/text-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification-tf.ipynb).
- [`FlaxRobertaForSequenceClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/flax/text-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification_flax.ipynb).
- [Text classification task guide](../tasks/sequence_classification)
<PipelineTag pipeline="token-classification"/>
- [`RobertaForTokenClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/token-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/token_classification.ipynb).
- [`TFRobertaForTokenClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/token-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/token_classification-tf.ipynb).
- [`FlaxRobertaForTokenClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/flax/token-classification).
- [Token classification](https://huggingface.co/course/chapter7/2?fw=pt) chapter of the 🤗 Hugging Face Course.
- [Token classification task guide](../tasks/token_classification)
<PipelineTag pipeline="fill-mask"/>
- A blog on [How to train a new language model from scratch using Transformers and Tokenizers](https://huggingface.co/blog/how-to-train) with RoBERTa.
- [`RobertaForMaskedLM`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/language-modeling#robertabertdistilbert-and-masked-language-modeling) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling.ipynb).
- [`TFRobertaForMaskedLM`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/language-modeling#run_mlmpy) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling-tf.ipynb).
- [`FlaxRobertaForMaskedLM`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/flax/language-modeling#masked-language-modeling) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/masked_language_modeling_flax.ipynb).
- [Masked language modeling](https://huggingface.co/course/chapter7/3?fw=pt) chapter of the 🤗 Hugging Face Course.
- [Masked language modeling task guide](../tasks/masked_language_modeling)
<PipelineTag pipeline="question-answering"/>
- A blog on [Accelerated Inference with Optimum and Transformers Pipelines](https://huggingface.co/blog/optimum-inference) with RoBERTa for question answering.
- [`RobertaForQuestionAnswering`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/question-answering) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/question_answering.ipynb).
- [`TFRobertaForQuestionAnswering`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/question-answering) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/question_answering-tf.ipynb).
- [`FlaxRobertaForQuestionAnswering`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/flax/question-answering).
- [Question answering](https://huggingface.co/course/chapter7/7?fw=pt) chapter of the 🤗 Hugging Face Course.
- [Question answering task guide](../tasks/question_answering)
**Multiple choice**
- [`RobertaForMultipleChoice`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/multiple-choice) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/multiple_choice.ipynb).
- [`TFRobertaForMultipleChoice`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/multiple-choice) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/multiple_choice-tf.ipynb).
- [Multiple choice task guide](../tasks/multiple_choice)
## RobertaConfig
[[autodoc]] RobertaConfig
## RobertaTokenizer
[[autodoc]] RobertaTokenizer
- build_inputs_with_special_tokens
- get_special_tokens_mask
- create_token_type_ids_from_sequences
- save_vocabulary
## RobertaTokenizerFast
[[autodoc]] RobertaTokenizerFast
- build_inputs_with_special_tokens
<frameworkcontent>
<pt>
## RobertaModel
[[autodoc]] RobertaModel
- forward
## RobertaForCausalLM
[[autodoc]] RobertaForCausalLM
- forward
## RobertaForMaskedLM
[[autodoc]] RobertaForMaskedLM
- forward
## RobertaForSequenceClassification
[[autodoc]] RobertaForSequenceClassification
- forward
## RobertaForMultipleChoice
[[autodoc]] RobertaForMultipleChoice
- forward
## RobertaForTokenClassification
[[autodoc]] RobertaForTokenClassification
- forward
## RobertaForQuestionAnswering
[[autodoc]] RobertaForQuestionAnswering
- forward
</pt>
<tf>
## TFRobertaModel
[[autodoc]] TFRobertaModel
- call
## TFRobertaForCausalLM
[[autodoc]] TFRobertaForCausalLM
- call
## TFRobertaForMaskedLM
[[autodoc]] TFRobertaForMaskedLM
- call
## TFRobertaForSequenceClassification
[[autodoc]] TFRobertaForSequenceClassification
- call
## TFRobertaForMultipleChoice
[[autodoc]] TFRobertaForMultipleChoice
- call
## TFRobertaForTokenClassification
[[autodoc]] TFRobertaForTokenClassification
- call
## TFRobertaForQuestionAnswering
[[autodoc]] TFRobertaForQuestionAnswering
- call
</tf>
<jax>
## FlaxRobertaModel
[[autodoc]] FlaxRobertaModel
- __call__
## FlaxRobertaForCausalLM
[[autodoc]] FlaxRobertaForCausalLM
- __call__
## FlaxRobertaForMaskedLM
[[autodoc]] FlaxRobertaForMaskedLM
- __call__
## FlaxRobertaForSequenceClassification
[[autodoc]] FlaxRobertaForSequenceClassification
- __call__
## FlaxRobertaForMultipleChoice
[[autodoc]] FlaxRobertaForMultipleChoice
- __call__
## FlaxRobertaForTokenClassification
[[autodoc]] FlaxRobertaForTokenClassification
- __call__
## FlaxRobertaForQuestionAnswering
[[autodoc]] FlaxRobertaForQuestionAnswering
- __call__
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/mobilevit.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# MobileViT
## Overview
The MobileViT model was proposed in [MobileViT: Light-weight, General-purpose, and Mobile-friendly Vision Transformer](https://arxiv.org/abs/2110.02178) by Sachin Mehta and Mohammad Rastegari. MobileViT introduces a new layer that replaces local processing in convolutions with global processing using transformers.
The abstract from the paper is the following:
*Light-weight convolutional neural networks (CNNs) are the de-facto for mobile vision tasks. Their spatial inductive biases allow them to learn representations with fewer parameters across different vision tasks. However, these networks are spatially local. To learn global representations, self-attention-based vision trans-formers (ViTs) have been adopted. Unlike CNNs, ViTs are heavy-weight. In this paper, we ask the following question: is it possible to combine the strengths of CNNs and ViTs to build a light-weight and low latency network for mobile vision tasks? Towards this end, we introduce MobileViT, a light-weight and general-purpose vision transformer for mobile devices. MobileViT presents a different perspective for the global processing of information with transformers, i.e., transformers as convolutions. Our results show that MobileViT significantly outperforms CNN- and ViT-based networks across different tasks and datasets. On the ImageNet-1k dataset, MobileViT achieves top-1 accuracy of 78.4% with about 6 million parameters, which is 3.2% and 6.2% more accurate than MobileNetv3 (CNN-based) and DeIT (ViT-based) for a similar number of parameters. On the MS-COCO object detection task, MobileViT is 5.7% more accurate than MobileNetv3 for a similar number of parameters.*
This model was contributed by [matthijs](https://huggingface.co/Matthijs). The TensorFlow version of the model was contributed by [sayakpaul](https://huggingface.co/sayakpaul). The original code and weights can be found [here](https://github.com/apple/ml-cvnets).
## Usage tips
- MobileViT is more like a CNN than a Transformer model. It does not work on sequence data but on batches of images. Unlike ViT, there are no embeddings. The backbone model outputs a feature map. You can follow [this tutorial](https://keras.io/examples/vision/mobilevit) for a lightweight introduction.
- One can use [`MobileViTImageProcessor`] to prepare images for the model. Note that if you do your own preprocessing, the pretrained checkpoints expect images to be in BGR pixel order (not RGB).
- The available image classification checkpoints are pre-trained on [ImageNet-1k](https://huggingface.co/datasets/imagenet-1k) (also referred to as ILSVRC 2012, a collection of 1.3 million images and 1,000 classes).
- The segmentation model uses a [DeepLabV3](https://arxiv.org/abs/1706.05587) head. The available semantic segmentation checkpoints are pre-trained on [PASCAL VOC](http://host.robots.ox.ac.uk/pascal/VOC/).
- As the name suggests MobileViT was designed to be performant and efficient on mobile phones. The TensorFlow versions of the MobileViT models are fully compatible with [TensorFlow Lite](https://www.tensorflow.org/lite).
You can use the following code to convert a MobileViT checkpoint (be it image classification or semantic segmentation) to generate a
TensorFlow Lite model:
```py
from transformers import TFMobileViTForImageClassification
import tensorflow as tf
model_ckpt = "apple/mobilevit-xx-small"
model = TFMobileViTForImageClassification.from_pretrained(model_ckpt)
converter = tf.lite.TFLiteConverter.from_keras_model(model)
converter.optimizations = [tf.lite.Optimize.DEFAULT]
converter.target_spec.supported_ops = [
tf.lite.OpsSet.TFLITE_BUILTINS,
tf.lite.OpsSet.SELECT_TF_OPS,
]
tflite_model = converter.convert()
tflite_filename = model_ckpt.split("/")[-1] + ".tflite"
with open(tflite_filename, "wb") as f:
f.write(tflite_model)
```
The resulting model will be just **about an MB** making it a good fit for mobile applications where resources and network
bandwidth can be constrained.
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with MobileViT.
<PipelineTag pipeline="image-classification"/>
- [`MobileViTForImageClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/image-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/image_classification.ipynb).
- See also: [Image classification task guide](../tasks/image_classification)
**Semantic segmentation**
- [Semantic segmentation task guide](../tasks/semantic_segmentation)
If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
## MobileViTConfig
[[autodoc]] MobileViTConfig
## MobileViTFeatureExtractor
[[autodoc]] MobileViTFeatureExtractor
- __call__
- post_process_semantic_segmentation
## MobileViTImageProcessor
[[autodoc]] MobileViTImageProcessor
- preprocess
- post_process_semantic_segmentation
<frameworkcontent>
<pt>
## MobileViTModel
[[autodoc]] MobileViTModel
- forward
## MobileViTForImageClassification
[[autodoc]] MobileViTForImageClassification
- forward
## MobileViTForSemanticSegmentation
[[autodoc]] MobileViTForSemanticSegmentation
- forward
</pt>
<tf>
## TFMobileViTModel
[[autodoc]] TFMobileViTModel
- call
## TFMobileViTForImageClassification
[[autodoc]] TFMobileViTForImageClassification
- call
## TFMobileViTForSemanticSegmentation
[[autodoc]] TFMobileViTForSemanticSegmentation
- call
</tf>
</frameworkcontent> | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/longt5.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# LongT5
## Overview
The LongT5 model was proposed in [LongT5: Efficient Text-To-Text Transformer for Long Sequences](https://arxiv.org/abs/2112.07916)
by Mandy Guo, Joshua Ainslie, David Uthus, Santiago Ontanon, Jianmo Ni, Yun-Hsuan Sung and Yinfei Yang. It's an
encoder-decoder transformer pre-trained in a text-to-text denoising generative setting. LongT5 model is an extension of
T5 model, and it enables using one of the two different efficient attention mechanisms - (1) Local attention, or (2)
Transient-Global attention.
The abstract from the paper is the following:
*Recent work has shown that either (1) increasing the input length or (2) increasing model size can improve the
performance of Transformer-based neural models. In this paper, we present a new model, called LongT5, with which we
explore the effects of scaling both the input length and model size at the same time. Specifically, we integrated
attention ideas from long-input transformers (ETC), and adopted pre-training strategies from summarization pre-training
(PEGASUS) into the scalable T5 architecture. The result is a new attention mechanism we call {\em Transient Global}
(TGlobal), which mimics ETC's local/global attention mechanism, but without requiring additional side-inputs. We are
able to achieve state-of-the-art results on several summarization tasks and outperform the original T5 models on
question answering tasks.*
This model was contributed by [stancld](https://huggingface.co/stancld).
The original code can be found [here](https://github.com/google-research/longt5).
## Usage tips
- [`LongT5ForConditionalGeneration`] is an extension of [`T5ForConditionalGeneration`] exchanging the traditional
encoder *self-attention* layer with efficient either *local* attention or *transient-global* (*tglobal*) attention.
- Unlike the T5 model, LongT5 does not use a task prefix. Furthermore, it uses a different pre-training objective
inspired by the pre-training of [`PegasusForConditionalGeneration`].
- LongT5 model is designed to work efficiently and very well on long-range *sequence-to-sequence* tasks where the
input sequence exceeds commonly used 512 tokens. It is capable of handling input sequences of a length up to 16,384 tokens.
- For *Local Attention*, the sparse sliding-window local attention operation allows a given token to attend only `r`
tokens to the left and right of it (with `r=127` by default). *Local Attention* does not introduce any new parameters
to the model. The complexity of the mechanism is linear in input sequence length `l`: `O(l*r)`.
- *Transient Global Attention* is an extension of the *Local Attention*. It, furthermore, allows each input token to
interact with all other tokens in the layer. This is achieved via splitting an input sequence into blocks of a fixed
length `k` (with a default `k=16`). Then, a global token for such a block is obtained via summing and normalizing the embeddings of every token
in the block. Thanks to this, the attention allows each token to attend to both nearby tokens like in Local attention, and
also every global token like in the case of standard global attention (*transient* represents the fact the global tokens
are constructed dynamically within each attention operation). As a consequence, *TGlobal* attention introduces
a few new parameters -- global relative position biases and a layer normalization for global token's embedding.
The complexity of this mechanism is `O(l(r + l/k))`.
- An example showing how to evaluate a fine-tuned LongT5 model on the [pubmed dataset](https://huggingface.co/datasets/scientific_papers) is below.
```python
>>> import evaluate
>>> from datasets import load_dataset
>>> from transformers import AutoTokenizer, LongT5ForConditionalGeneration
>>> dataset = load_dataset("scientific_papers", "pubmed", split="validation")
>>> model = (
... LongT5ForConditionalGeneration.from_pretrained("Stancld/longt5-tglobal-large-16384-pubmed-3k_steps")
... .to("cuda")
... .half()
... )
>>> tokenizer = AutoTokenizer.from_pretrained("Stancld/longt5-tglobal-large-16384-pubmed-3k_steps")
>>> def generate_answers(batch):
... inputs_dict = tokenizer(
... batch["article"], max_length=16384, padding="max_length", truncation=True, return_tensors="pt"
... )
... input_ids = inputs_dict.input_ids.to("cuda")
... attention_mask = inputs_dict.attention_mask.to("cuda")
... output_ids = model.generate(input_ids, attention_mask=attention_mask, max_length=512, num_beams=2)
... batch["predicted_abstract"] = tokenizer.batch_decode(output_ids, skip_special_tokens=True)
... return batch
>>> result = dataset.map(generate_answer, batched=True, batch_size=2)
>>> rouge = evaluate.load("rouge")
>>> rouge.compute(predictions=result["predicted_abstract"], references=result["abstract"])
```
## Resources
- [Translation task guide](../tasks/translation)
- [Summarization task guide](../tasks/summarization)
## LongT5Config
[[autodoc]] LongT5Config
<frameworkcontent>
<pt>
## LongT5Model
[[autodoc]] LongT5Model
- forward
## LongT5ForConditionalGeneration
[[autodoc]] LongT5ForConditionalGeneration
- forward
## LongT5EncoderModel
[[autodoc]] LongT5EncoderModel
- forward
</pt>
<jax>
## FlaxLongT5Model
[[autodoc]] FlaxLongT5Model
- __call__
- encode
- decode
## FlaxLongT5ForConditionalGeneration
[[autodoc]] FlaxLongT5ForConditionalGeneration
- __call__
- encode
- decode
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/esm.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# ESM
## Overview
This page provides code and pre-trained weights for Transformer protein language models from Meta AI's Fundamental
AI Research Team, providing the state-of-the-art ESMFold and ESM-2, and the previously released ESM-1b and ESM-1v.
Transformer protein language models were introduced in the paper [Biological structure and function emerge from scaling
unsupervised learning to 250 million protein sequences](https://www.pnas.org/content/118/15/e2016239118) by
Alexander Rives, Joshua Meier, Tom Sercu, Siddharth Goyal, Zeming Lin, Jason Liu, Demi Guo, Myle Ott,
C. Lawrence Zitnick, Jerry Ma, and Rob Fergus.
The first version of this paper was [preprinted in 2019](https://www.biorxiv.org/content/10.1101/622803v1?versioned=true).
ESM-2 outperforms all tested single-sequence protein language models across a range of structure prediction tasks,
and enables atomic resolution structure prediction.
It was released with the paper [Language models of protein sequences at the scale of evolution enable accurate
structure prediction](https://doi.org/10.1101/2022.07.20.500902) by Zeming Lin, Halil Akin, Roshan Rao, Brian Hie,
Zhongkai Zhu, Wenting Lu, Allan dos Santos Costa, Maryam Fazel-Zarandi, Tom Sercu, Sal Candido and Alexander Rives.
Also introduced in this paper was ESMFold. It uses an ESM-2 stem with a head that can predict folded protein
structures with state-of-the-art accuracy. Unlike [AlphaFold2](https://www.nature.com/articles/s41586-021-03819-2),
it relies on the token embeddings from the large pre-trained protein language model stem and does not perform a multiple
sequence alignment (MSA) step at inference time, which means that ESMFold checkpoints are fully "standalone" -
they do not require a database of known protein sequences and structures with associated external query tools
to make predictions, and are much faster as a result.
The abstract from
"Biological structure and function emerge from scaling unsupervised learning to 250
million protein sequences" is
*In the field of artificial intelligence, a combination of scale in data and model capacity enabled by unsupervised
learning has led to major advances in representation learning and statistical generation. In the life sciences, the
anticipated growth of sequencing promises unprecedented data on natural sequence diversity. Protein language modeling
at the scale of evolution is a logical step toward predictive and generative artificial intelligence for biology. To
this end, we use unsupervised learning to train a deep contextual language model on 86 billion amino acids across 250
million protein sequences spanning evolutionary diversity. The resulting model contains information about biological
properties in its representations. The representations are learned from sequence data alone. The learned representation
space has a multiscale organization reflecting structure from the level of biochemical properties of amino acids to
remote homology of proteins. Information about secondary and tertiary structure is encoded in the representations and
can be identified by linear projections. Representation learning produces features that generalize across a range of
applications, enabling state-of-the-art supervised prediction of mutational effect and secondary structure and
improving state-of-the-art features for long-range contact prediction.*
The abstract from
"Language models of protein sequences at the scale of evolution enable accurate structure prediction" is
*Large language models have recently been shown to develop emergent capabilities with scale, going beyond
simple pattern matching to perform higher level reasoning and generate lifelike images and text. While
language models trained on protein sequences have been studied at a smaller scale, little is known about
what they learn about biology as they are scaled up. In this work we train models up to 15 billion parameters,
the largest language models of proteins to be evaluated to date. We find that as models are scaled they learn
information enabling the prediction of the three-dimensional structure of a protein at the resolution of
individual atoms. We present ESMFold for high accuracy end-to-end atomic level structure prediction directly
from the individual sequence of a protein. ESMFold has similar accuracy to AlphaFold2 and RoseTTAFold for
sequences with low perplexity that are well understood by the language model. ESMFold inference is an
order of magnitude faster than AlphaFold2, enabling exploration of the structural space of metagenomic
proteins in practical timescales.*
The original code can be found [here](https://github.com/facebookresearch/esm) and was
was developed by the Fundamental AI Research team at Meta AI.
ESM-1b, ESM-1v and ESM-2 were contributed to huggingface by [jasonliu](https://huggingface.co/jasonliu)
and [Matt](https://huggingface.co/Rocketknight1).
ESMFold was contributed to huggingface by [Matt](https://huggingface.co/Rocketknight1) and
[Sylvain](https://huggingface.co/sgugger), with a big thank you to Nikita Smetanin, Roshan Rao and Tom Sercu for their
help throughout the process!
## Usage tips
- ESM models are trained with a masked language modeling (MLM) objective.
- The HuggingFace port of ESMFold uses portions of the [openfold](https://github.com/aqlaboratory/openfold) library. The `openfold` library is licensed under the Apache License 2.0.
## Resources
- [Text classification task guide](../tasks/sequence_classification)
- [Token classification task guide](../tasks/token_classification)
- [Masked language modeling task guide](../tasks/masked_language_modeling)
## EsmConfig
[[autodoc]] EsmConfig
- all
## EsmTokenizer
[[autodoc]] EsmTokenizer
- build_inputs_with_special_tokens
- get_special_tokens_mask
- create_token_type_ids_from_sequences
- save_vocabulary
<frameworkcontent>
<pt>
## EsmModel
[[autodoc]] EsmModel
- forward
## EsmForMaskedLM
[[autodoc]] EsmForMaskedLM
- forward
## EsmForSequenceClassification
[[autodoc]] EsmForSequenceClassification
- forward
## EsmForTokenClassification
[[autodoc]] EsmForTokenClassification
- forward
## EsmForProteinFolding
[[autodoc]] EsmForProteinFolding
- forward
</pt>
<tf>
## TFEsmModel
[[autodoc]] TFEsmModel
- call
## TFEsmForMaskedLM
[[autodoc]] TFEsmForMaskedLM
- call
## TFEsmForSequenceClassification
[[autodoc]] TFEsmForSequenceClassification
- call
## TFEsmForTokenClassification
[[autodoc]] TFEsmForTokenClassification
- call
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/xlm.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# XLM
<div class="flex flex-wrap space-x-1">
<a href="https://huggingface.co/models?filter=xlm">
<img alt="Models" src="https://img.shields.io/badge/All_model_pages-xlm-blueviolet">
</a>
<a href="https://huggingface.co/spaces/docs-demos/xlm-mlm-en-2048">
<img alt="Spaces" src="https://img.shields.io/badge/%F0%9F%A4%97%20Hugging%20Face-Spaces-blue">
</a>
</div>
## Overview
The XLM model was proposed in [Cross-lingual Language Model Pretraining](https://arxiv.org/abs/1901.07291) by
Guillaume Lample, Alexis Conneau. It's a transformer pretrained using one of the following objectives:
- a causal language modeling (CLM) objective (next token prediction),
- a masked language modeling (MLM) objective (BERT-like), or
- a Translation Language Modeling (TLM) object (extension of BERT's MLM to multiple language inputs)
The abstract from the paper is the following:
*Recent studies have demonstrated the efficiency of generative pretraining for English natural language understanding.
In this work, we extend this approach to multiple languages and show the effectiveness of cross-lingual pretraining. We
propose two methods to learn cross-lingual language models (XLMs): one unsupervised that only relies on monolingual
data, and one supervised that leverages parallel data with a new cross-lingual language model objective. We obtain
state-of-the-art results on cross-lingual classification, unsupervised and supervised machine translation. On XNLI, our
approach pushes the state of the art by an absolute gain of 4.9% accuracy. On unsupervised machine translation, we
obtain 34.3 BLEU on WMT'16 German-English, improving the previous state of the art by more than 9 BLEU. On supervised
machine translation, we obtain a new state of the art of 38.5 BLEU on WMT'16 Romanian-English, outperforming the
previous best approach by more than 4 BLEU. Our code and pretrained models will be made publicly available.*
This model was contributed by [thomwolf](https://huggingface.co/thomwolf). The original code can be found [here](https://github.com/facebookresearch/XLM/).
## Usage tips
- XLM has many different checkpoints, which were trained using different objectives: CLM, MLM or TLM. Make sure to
select the correct objective for your task (e.g. MLM checkpoints are not suitable for generation).
- XLM has multilingual checkpoints which leverage a specific `lang` parameter. Check out the [multi-lingual](../multilingual) page for more information.
- A transformer model trained on several languages. There are three different type of training for this model and the library provides checkpoints for all of them:
* Causal language modeling (CLM) which is the traditional autoregressive training (so this model could be in the previous section as well). One of the languages is selected for each training sample, and the model input is a sentence of 256 tokens, that may span over several documents in one of those languages.
* Masked language modeling (MLM) which is like RoBERTa. One of the languages is selected for each training sample, and the model input is a sentence of 256 tokens, that may span over several documents in one of those languages, with dynamic masking of the tokens.
* A combination of MLM and translation language modeling (TLM). This consists of concatenating a sentence in two different languages, with random masking. To predict one of the masked tokens, the model can use both, the surrounding context in language 1 and the context given by language 2.
## Resources
- [Text classification task guide](../tasks/sequence_classification)
- [Token classification task guide](../tasks/token_classification)
- [Question answering task guide](../tasks/question_answering)
- [Causal language modeling task guide](../tasks/language_modeling)
- [Masked language modeling task guide](../tasks/masked_language_modeling)
- [Multiple choice task guide](../tasks/multiple_choice)
## XLMConfig
[[autodoc]] XLMConfig
## XLMTokenizer
[[autodoc]] XLMTokenizer
- build_inputs_with_special_tokens
- get_special_tokens_mask
- create_token_type_ids_from_sequences
- save_vocabulary
## XLM specific outputs
[[autodoc]] models.xlm.modeling_xlm.XLMForQuestionAnsweringOutput
<frameworkcontent>
<pt>
## XLMModel
[[autodoc]] XLMModel
- forward
## XLMWithLMHeadModel
[[autodoc]] XLMWithLMHeadModel
- forward
## XLMForSequenceClassification
[[autodoc]] XLMForSequenceClassification
- forward
## XLMForMultipleChoice
[[autodoc]] XLMForMultipleChoice
- forward
## XLMForTokenClassification
[[autodoc]] XLMForTokenClassification
- forward
## XLMForQuestionAnsweringSimple
[[autodoc]] XLMForQuestionAnsweringSimple
- forward
## XLMForQuestionAnswering
[[autodoc]] XLMForQuestionAnswering
- forward
</pt>
<tf>
## TFXLMModel
[[autodoc]] TFXLMModel
- call
## TFXLMWithLMHeadModel
[[autodoc]] TFXLMWithLMHeadModel
- call
## TFXLMForSequenceClassification
[[autodoc]] TFXLMForSequenceClassification
- call
## TFXLMForMultipleChoice
[[autodoc]] TFXLMForMultipleChoice
- call
## TFXLMForTokenClassification
[[autodoc]] TFXLMForTokenClassification
- call
## TFXLMForQuestionAnsweringSimple
[[autodoc]] TFXLMForQuestionAnsweringSimple
- call
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/electra.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# ELECTRA
<div class="flex flex-wrap space-x-1">
<a href="https://huggingface.co/models?filter=electra">
<img alt="Models" src="https://img.shields.io/badge/All_model_pages-electra-blueviolet">
</a>
<a href="https://huggingface.co/spaces/docs-demos/electra_large_discriminator_squad2_512">
<img alt="Spaces" src="https://img.shields.io/badge/%F0%9F%A4%97%20Hugging%20Face-Spaces-blue">
</a>
</div>
## Overview
The ELECTRA model was proposed in the paper [ELECTRA: Pre-training Text Encoders as Discriminators Rather Than
Generators](https://openreview.net/pdf?id=r1xMH1BtvB). ELECTRA is a new pretraining approach which trains two
transformer models: the generator and the discriminator. The generator's role is to replace tokens in a sequence, and
is therefore trained as a masked language model. The discriminator, which is the model we're interested in, tries to
identify which tokens were replaced by the generator in the sequence.
The abstract from the paper is the following:
*Masked language modeling (MLM) pretraining methods such as BERT corrupt the input by replacing some tokens with [MASK]
and then train a model to reconstruct the original tokens. While they produce good results when transferred to
downstream NLP tasks, they generally require large amounts of compute to be effective. As an alternative, we propose a
more sample-efficient pretraining task called replaced token detection. Instead of masking the input, our approach
corrupts it by replacing some tokens with plausible alternatives sampled from a small generator network. Then, instead
of training a model that predicts the original identities of the corrupted tokens, we train a discriminative model that
predicts whether each token in the corrupted input was replaced by a generator sample or not. Thorough experiments
demonstrate this new pretraining task is more efficient than MLM because the task is defined over all input tokens
rather than just the small subset that was masked out. As a result, the contextual representations learned by our
approach substantially outperform the ones learned by BERT given the same model size, data, and compute. The gains are
particularly strong for small models; for example, we train a model on one GPU for 4 days that outperforms GPT (trained
using 30x more compute) on the GLUE natural language understanding benchmark. Our approach also works well at scale,
where it performs comparably to RoBERTa and XLNet while using less than 1/4 of their compute and outperforms them when
using the same amount of compute.*
This model was contributed by [lysandre](https://huggingface.co/lysandre). The original code can be found [here](https://github.com/google-research/electra).
## Usage tips
- ELECTRA is the pretraining approach, therefore there is nearly no changes done to the underlying model: BERT. The
only change is the separation of the embedding size and the hidden size: the embedding size is generally smaller,
while the hidden size is larger. An additional projection layer (linear) is used to project the embeddings from their
embedding size to the hidden size. In the case where the embedding size is the same as the hidden size, no projection
layer is used.
- ELECTRA is a transformer model pretrained with the use of another (small) masked language model. The inputs are corrupted by that language model, which takes an input text that is randomly masked and outputs a text in which ELECTRA has to predict which token is an original and which one has been replaced. Like for GAN training, the small language model is trained for a few steps (but with the original texts as objective, not to fool the ELECTRA model like in a traditional GAN setting) then the ELECTRA model is trained for a few steps.
- The ELECTRA checkpoints saved using [Google Research's implementation](https://github.com/google-research/electra)
contain both the generator and discriminator. The conversion script requires the user to name which model to export
into the correct architecture. Once converted to the HuggingFace format, these checkpoints may be loaded into all
available ELECTRA models, however. This means that the discriminator may be loaded in the
[`ElectraForMaskedLM`] model, and the generator may be loaded in the
[`ElectraForPreTraining`] model (the classification head will be randomly initialized as it
doesn't exist in the generator).
## Resources
- [Text classification task guide](../tasks/sequence_classification)
- [Token classification task guide](../tasks/token_classification)
- [Question answering task guide](../tasks/question_answering)
- [Causal language modeling task guide](../tasks/language_modeling)
- [Masked language modeling task guide](../tasks/masked_language_modeling)
- [Multiple choice task guide](../tasks/multiple_choice)
## ElectraConfig
[[autodoc]] ElectraConfig
## ElectraTokenizer
[[autodoc]] ElectraTokenizer
## ElectraTokenizerFast
[[autodoc]] ElectraTokenizerFast
## Electra specific outputs
[[autodoc]] models.electra.modeling_electra.ElectraForPreTrainingOutput
[[autodoc]] models.electra.modeling_tf_electra.TFElectraForPreTrainingOutput
<frameworkcontent>
<pt>
## ElectraModel
[[autodoc]] ElectraModel
- forward
## ElectraForPreTraining
[[autodoc]] ElectraForPreTraining
- forward
## ElectraForCausalLM
[[autodoc]] ElectraForCausalLM
- forward
## ElectraForMaskedLM
[[autodoc]] ElectraForMaskedLM
- forward
## ElectraForSequenceClassification
[[autodoc]] ElectraForSequenceClassification
- forward
## ElectraForMultipleChoice
[[autodoc]] ElectraForMultipleChoice
- forward
## ElectraForTokenClassification
[[autodoc]] ElectraForTokenClassification
- forward
## ElectraForQuestionAnswering
[[autodoc]] ElectraForQuestionAnswering
- forward
</pt>
<tf>
## TFElectraModel
[[autodoc]] TFElectraModel
- call
## TFElectraForPreTraining
[[autodoc]] TFElectraForPreTraining
- call
## TFElectraForMaskedLM
[[autodoc]] TFElectraForMaskedLM
- call
## TFElectraForSequenceClassification
[[autodoc]] TFElectraForSequenceClassification
- call
## TFElectraForMultipleChoice
[[autodoc]] TFElectraForMultipleChoice
- call
## TFElectraForTokenClassification
[[autodoc]] TFElectraForTokenClassification
- call
## TFElectraForQuestionAnswering
[[autodoc]] TFElectraForQuestionAnswering
- call
</tf>
<jax>
## FlaxElectraModel
[[autodoc]] FlaxElectraModel
- __call__
## FlaxElectraForPreTraining
[[autodoc]] FlaxElectraForPreTraining
- __call__
## FlaxElectraForCausalLM
[[autodoc]] FlaxElectraForCausalLM
- __call__
## FlaxElectraForMaskedLM
[[autodoc]] FlaxElectraForMaskedLM
- __call__
## FlaxElectraForSequenceClassification
[[autodoc]] FlaxElectraForSequenceClassification
- __call__
## FlaxElectraForMultipleChoice
[[autodoc]] FlaxElectraForMultipleChoice
- __call__
## FlaxElectraForTokenClassification
[[autodoc]] FlaxElectraForTokenClassification
- __call__
## FlaxElectraForQuestionAnswering
[[autodoc]] FlaxElectraForQuestionAnswering
- __call__
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/swiftformer.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# SwiftFormer
## Overview
The SwiftFormer model was proposed in [SwiftFormer: Efficient Additive Attention for Transformer-based Real-time Mobile Vision Applications](https://arxiv.org/abs/2303.15446) by Abdelrahman Shaker, Muhammad Maaz, Hanoona Rasheed, Salman Khan, Ming-Hsuan Yang, Fahad Shahbaz Khan.
The SwiftFormer paper introduces a novel efficient additive attention mechanism that effectively replaces the quadratic matrix multiplication operations in the self-attention computation with linear element-wise multiplications. A series of models called 'SwiftFormer' is built based on this, which achieves state-of-the-art performance in terms of both accuracy and mobile inference speed. Even their small variant achieves 78.5% top-1 ImageNet1K accuracy with only 0.8 ms latency on iPhone 14, which is more accurate and 2× faster compared to MobileViT-v2.
The abstract from the paper is the following:
*Self-attention has become a defacto choice for capturing global context in various vision applications. However, its quadratic computational complexity with respect to image resolution limits its use in real-time applications, especially for deployment on resource-constrained mobile devices. Although hybrid approaches have been proposed to combine the advantages of convolutions and self-attention for a better speed-accuracy trade-off, the expensive matrix multiplication operations in self-attention remain a bottleneck. In this work, we introduce a novel efficient additive attention mechanism that effectively replaces the quadratic matrix multiplication operations with linear element-wise multiplications. Our design shows that the key-value interaction can be replaced with a linear layer without sacrificing any accuracy. Unlike previous state-of-the-art methods, our efficient formulation of self-attention enables its usage at all stages of the network. Using our proposed efficient additive attention, we build a series of models called "SwiftFormer" which achieves state-of-the-art performance in terms of both accuracy and mobile inference speed. Our small variant achieves 78.5% top-1 ImageNet-1K accuracy with only 0.8 ms latency on iPhone 14, which is more accurate and 2x faster compared to MobileViT-v2.*
This model was contributed by [shehan97](https://huggingface.co/shehan97).
The original code can be found [here](https://github.com/Amshaker/SwiftFormer).
## SwiftFormerConfig
[[autodoc]] SwiftFormerConfig
## SwiftFormerModel
[[autodoc]] SwiftFormerModel
- forward
## SwiftFormerForImageClassification
[[autodoc]] SwiftFormerForImageClassification
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/patchtsmixer.md | <!--Copyright 2023 IBM and HuggingFace Inc. team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# PatchTSMixer
## Overview
The PatchTSMixer model was proposed in [TSMixer: Lightweight MLP-Mixer Model for Multivariate Time Series Forecasting](https://arxiv.org/pdf/2306.09364.pdf) by Vijay Ekambaram, Arindam Jati, Nam Nguyen, Phanwadee Sinthong and Jayant Kalagnanam.
PatchTSMixer is a lightweight time-series modeling approach based on the MLP-Mixer architecture. In this HuggingFace implementation, we provide PatchTSMixer's capabilities to effortlessly facilitate lightweight mixing across patches, channels, and hidden features for effective multivariate time-series modeling. It also supports various attention mechanisms starting from simple gated attention to more complex self-attention blocks that can be customized accordingly. The model can be pretrained and subsequently used for various downstream tasks such as forecasting, classification and regression.
The abstract from the paper is the following:
*TSMixer is a lightweight neural architecture exclusively composed of multi-layer perceptron (MLP) modules designed for multivariate forecasting and representation learning on patched time series. Our model draws inspiration from the success of MLP-Mixer models in computer vision. We demonstrate the challenges involved in adapting Vision MLP-Mixer for time series and introduce empirically validated components to enhance accuracy. This includes a novel design paradigm of attaching online reconciliation heads to the MLP-Mixer backbone, for explicitly modeling the time-series properties such as hierarchy and channel-correlations. We also propose a Hybrid channel modeling approach to effectively handle noisy channel interactions and generalization across diverse datasets, a common challenge in existing patch channel-mixing methods. Additionally, a simple gated attention mechanism is introduced in the backbone to prioritize important features. By incorporating these lightweight components, we significantly enhance the learning capability of simple MLP structures, outperforming complex Transformer models with minimal computing usage. Moreover, TSMixer's modular design enables compatibility with both supervised and masked self-supervised learning methods, making it a promising building block for time-series Foundation Models. TSMixer outperforms state-of-the-art MLP and Transformer models in forecasting by a considerable margin of 8-60%. It also outperforms the latest strong benchmarks of Patch-Transformer models (by 1-2%) with a significant reduction in memory and runtime (2-3X).*
This model was contributed by [ajati](https://huggingface.co/ajati), [vijaye12](https://huggingface.co/vijaye12),
[gsinthong](https://huggingface.co/gsinthong), [namctin](https://huggingface.co/namctin),
[wmgifford](https://huggingface.co/wmgifford), [kashif](https://huggingface.co/kashif).
## Sample usage
```python
from transformers import PatchTSMixerConfig, PatchTSMixerForPrediction
from transformers import Trainer, TrainingArguments,
config = PatchTSMixerConfig(context_length = 512, prediction_length = 96)
model = PatchTSMixerForPrediction(config)
trainer = Trainer(model=model, args=training_args,
train_dataset=train_dataset,
eval_dataset=valid_dataset)
trainer.train()
results = trainer.evaluate(test_dataset)
```
## Usage tips
The model can also be used for time series classification and time series regression. See the respective [`PatchTSMixerForTimeSeriesClassification`] and [`PatchTSMixerForRegression`] classes.
## PatchTSMixerConfig
[[autodoc]] PatchTSMixerConfig
## PatchTSMixerModel
[[autodoc]] PatchTSMixerModel
- forward
## PatchTSMixerForPrediction
[[autodoc]] PatchTSMixerForPrediction
- forward
## PatchTSMixerForTimeSeriesClassification
[[autodoc]] PatchTSMixerForTimeSeriesClassification
- forward
## PatchTSMixerForPretraining
[[autodoc]] PatchTSMixerForPretraining
- forward
## PatchTSMixerForRegression
[[autodoc]] PatchTSMixerForRegression
- forward | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/videomae.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# VideoMAE
## Overview
The VideoMAE model was proposed in [VideoMAE: Masked Autoencoders are Data-Efficient Learners for Self-Supervised Video Pre-Training](https://arxiv.org/abs/2203.12602) by Zhan Tong, Yibing Song, Jue Wang, Limin Wang.
VideoMAE extends masked auto encoders ([MAE](vit_mae)) to video, claiming state-of-the-art performance on several video classification benchmarks.
The abstract from the paper is the following:
*Pre-training video transformers on extra large-scale datasets is generally required to achieve premier performance on relatively small datasets. In this paper, we show that video masked autoencoders (VideoMAE) are data-efficient learners for self-supervised video pre-training (SSVP). We are inspired by the recent ImageMAE and propose customized video tube masking and reconstruction. These simple designs turn out to be effective for overcoming information leakage caused by the temporal correlation during video reconstruction. We obtain three important findings on SSVP: (1) An extremely high proportion of masking ratio (i.e., 90% to 95%) still yields favorable performance of VideoMAE. The temporally redundant video content enables higher masking ratio than that of images. (2) VideoMAE achieves impressive results on very small datasets (i.e., around 3k-4k videos) without using any extra data. This is partially ascribed to the challenging task of video reconstruction to enforce high-level structure learning. (3) VideoMAE shows that data quality is more important than data quantity for SSVP. Domain shift between pre-training and target datasets are important issues in SSVP. Notably, our VideoMAE with the vanilla ViT backbone can achieve 83.9% on Kinects-400, 75.3% on Something-Something V2, 90.8% on UCF101, and 61.1% on HMDB51 without using any extra data.*
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/model_doc/videomae_architecture.jpeg"
alt="drawing" width="600"/>
<small> VideoMAE pre-training. Taken from the <a href="https://arxiv.org/abs/2203.12602">original paper</a>. </small>
This model was contributed by [nielsr](https://huggingface.co/nielsr).
The original code can be found [here](https://github.com/MCG-NJU/VideoMAE).
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with VideoMAE. If
you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll
review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
**Video classification**
- [A notebook](https://github.com/huggingface/notebooks/blob/main/examples/video_classification.ipynb) that shows how
to fine-tune a VideoMAE model on a custom dataset.
- [Video classification task guide](../tasks/video_classification)
- [A 🤗 Space](https://huggingface.co/spaces/sayakpaul/video-classification-ucf101-subset) showing how to perform inference with a video classification model.
## VideoMAEConfig
[[autodoc]] VideoMAEConfig
## VideoMAEFeatureExtractor
[[autodoc]] VideoMAEFeatureExtractor
- __call__
## VideoMAEImageProcessor
[[autodoc]] VideoMAEImageProcessor
- preprocess
## VideoMAEModel
[[autodoc]] VideoMAEModel
- forward
## VideoMAEForPreTraining
`VideoMAEForPreTraining` includes the decoder on top for self-supervised pre-training.
[[autodoc]] transformers.VideoMAEForPreTraining
- forward
## VideoMAEForVideoClassification
[[autodoc]] transformers.VideoMAEForVideoClassification
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/prophetnet.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# ProphetNet
<div class="flex flex-wrap space-x-1">
<a href="https://huggingface.co/models?filter=prophetnet">
<img alt="Models" src="https://img.shields.io/badge/All_model_pages-prophetnet-blueviolet">
</a>
<a href="https://huggingface.co/spaces/docs-demos/prophetnet-large-uncased">
<img alt="Spaces" src="https://img.shields.io/badge/%F0%9F%A4%97%20Hugging%20Face-Spaces-blue">
</a>
</div>
## Overview
The ProphetNet model was proposed in [ProphetNet: Predicting Future N-gram for Sequence-to-Sequence Pre-training,](https://arxiv.org/abs/2001.04063) by Yu Yan, Weizhen Qi, Yeyun Gong, Dayiheng Liu, Nan Duan, Jiusheng Chen, Ruofei
Zhang, Ming Zhou on 13 Jan, 2020.
ProphetNet is an encoder-decoder model and can predict n-future tokens for "ngram" language modeling instead of just
the next token.
The abstract from the paper is the following:
*In this paper, we present a new sequence-to-sequence pretraining model called ProphetNet, which introduces a novel
self-supervised objective named future n-gram prediction and the proposed n-stream self-attention mechanism. Instead of
the optimization of one-step ahead prediction in traditional sequence-to-sequence model, the ProphetNet is optimized by
n-step ahead prediction which predicts the next n tokens simultaneously based on previous context tokens at each time
step. The future n-gram prediction explicitly encourages the model to plan for the future tokens and prevent
overfitting on strong local correlations. We pre-train ProphetNet using a base scale dataset (16GB) and a large scale
dataset (160GB) respectively. Then we conduct experiments on CNN/DailyMail, Gigaword, and SQuAD 1.1 benchmarks for
abstractive summarization and question generation tasks. Experimental results show that ProphetNet achieves new
state-of-the-art results on all these datasets compared to the models using the same scale pretraining corpus.*
The Authors' code can be found [here](https://github.com/microsoft/ProphetNet).
## Usage tips
- ProphetNet is a model with absolute position embeddings so it's usually advised to pad the inputs on the right rather than
the left.
- The model architecture is based on the original Transformer, but replaces the “standard” self-attention mechanism in the decoder by a a main self-attention mechanism and a self and n-stream (predict) self-attention mechanism.
## Resources
- [Causal language modeling task guide](../tasks/language_modeling)
- [Translation task guide](../tasks/translation)
- [Summarization task guide](../tasks/summarization)
## ProphetNetConfig
[[autodoc]] ProphetNetConfig
## ProphetNetTokenizer
[[autodoc]] ProphetNetTokenizer
## ProphetNet specific outputs
[[autodoc]] models.prophetnet.modeling_prophetnet.ProphetNetSeq2SeqLMOutput
[[autodoc]] models.prophetnet.modeling_prophetnet.ProphetNetSeq2SeqModelOutput
[[autodoc]] models.prophetnet.modeling_prophetnet.ProphetNetDecoderModelOutput
[[autodoc]] models.prophetnet.modeling_prophetnet.ProphetNetDecoderLMOutput
## ProphetNetModel
[[autodoc]] ProphetNetModel
- forward
## ProphetNetEncoder
[[autodoc]] ProphetNetEncoder
- forward
## ProphetNetDecoder
[[autodoc]] ProphetNetDecoder
- forward
## ProphetNetForConditionalGeneration
[[autodoc]] ProphetNetForConditionalGeneration
- forward
## ProphetNetForCausalLM
[[autodoc]] ProphetNetForCausalLM
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/gptsan-japanese.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# GPTSAN-japanese
## Overview
The GPTSAN-japanese model was released in the repository by Toshiyuki Sakamoto (tanreinama).
GPTSAN is a Japanese language model using Switch Transformer. It has the same structure as the model introduced as Prefix LM
in the T5 paper, and support both Text Generation and Masked Language Modeling tasks. These basic tasks similarly can
fine-tune for translation or summarization.
### Usage example
The `generate()` method can be used to generate text using GPTSAN-Japanese model.
```python
>>> from transformers import AutoModel, AutoTokenizer
>>> import torch
>>> tokenizer = AutoTokenizer.from_pretrained("Tanrei/GPTSAN-japanese")
>>> model = AutoModel.from_pretrained("Tanrei/GPTSAN-japanese").cuda()
>>> x_tok = tokenizer("は、", prefix_text="織田信長", return_tensors="pt")
>>> torch.manual_seed(0)
>>> gen_tok = model.generate(x_tok.input_ids.cuda(), token_type_ids=x_tok.token_type_ids.cuda(), max_new_tokens=20)
>>> tokenizer.decode(gen_tok[0])
'織田信長は、2004年に『戦国BASARA』のために、豊臣秀吉'
```
## GPTSAN Features
GPTSAN has some unique features. It has a model structure of Prefix-LM. It works as a shifted Masked Language Model for Prefix Input tokens. Un-prefixed inputs behave like normal generative models.
The Spout vector is a GPTSAN specific input. Spout is pre-trained with random inputs, but you can specify a class of text or an arbitrary vector during fine-tuning. This allows you to indicate the tendency of the generated text.
GPTSAN has a sparse Feed Forward based on Switch-Transformer. You can also add other layers and train them partially. See the original GPTSAN repository for details.
### Prefix-LM Model
GPTSAN has the structure of the model named Prefix-LM in the `T5` paper. (The original GPTSAN repository calls it `hybrid`)
In GPTSAN, the `Prefix` part of Prefix-LM, that is, the input position that can be referenced by both tokens, can be specified with any length.
Arbitrary lengths can also be specified differently for each batch.
This length applies to the text entered in `prefix_text` for the tokenizer.
The tokenizer returns the mask of the `Prefix` part of Prefix-LM as `token_type_ids`.
The model treats the part where `token_type_ids` is 1 as a `Prefix` part, that is, the input can refer to both tokens before and after.
## Usage tips
Specifying the Prefix part is done with a mask passed to self-attention.
When token_type_ids=None or all zero, it is equivalent to regular causal mask
for example:
>>> x_token = tokenizer("ｱｲｳｴ")
input_ids: | SOT | SEG | ｱ | ｲ | ｳ | ｴ |
token_type_ids: | 1 | 0 | 0 | 0 | 0 | 0 |
prefix_lm_mask:
SOT | 1 0 0 0 0 0 |
SEG | 1 1 0 0 0 0 |
ｱ | 1 1 1 0 0 0 |
ｲ | 1 1 1 1 0 0 |
ｳ | 1 1 1 1 1 0 |
ｴ | 1 1 1 1 1 1 |
>>> x_token = tokenizer("", prefix_text="ｱｲｳｴ")
input_ids: | SOT | ｱ | ｲ | ｳ | ｴ | SEG |
token_type_ids: | 1 | 1 | 1 | 1 | 1 | 0 |
prefix_lm_mask:
SOT | 1 1 1 1 1 0 |
ｱ | 1 1 1 1 1 0 |
ｲ | 1 1 1 1 1 0 |
ｳ | 1 1 1 1 1 0 |
ｴ | 1 1 1 1 1 0 |
SEG | 1 1 1 1 1 1 |
>>> x_token = tokenizer("ｳｴ", prefix_text="ｱｲ")
input_ids: | SOT | ｱ | ｲ | SEG | ｳ | ｴ |
token_type_ids: | 1 | 1 | 1 | 0 | 0 | 0 |
prefix_lm_mask:
SOT | 1 1 1 0 0 0 |
ｱ | 1 1 1 0 0 0 |
ｲ | 1 1 1 0 0 0 |
SEG | 1 1 1 1 0 0 |
ｳ | 1 1 1 1 1 0 |
ｴ | 1 1 1 1 1 1 |
### Spout Vector
A Spout Vector is a special vector for controlling text generation.
This vector is treated as the first embedding in self-attention to bring extraneous attention to the generated tokens.
In the pre-trained model published from `Tanrei/GPTSAN-japanese`, the Spout Vector is a 128-dimensional vector that passes through 8 fully connected layers in the model and is projected into the space acting as external attention.
The Spout Vector projected by the fully connected layer is split to be passed to all self-attentions.
## GPTSanJapaneseConfig
[[autodoc]] GPTSanJapaneseConfig
## GPTSanJapaneseTokenizer
[[autodoc]] GPTSanJapaneseTokenizer
## GPTSanJapaneseModel
[[autodoc]] GPTSanJapaneseModel
## GPTSanJapaneseForConditionalGeneration
[[autodoc]] GPTSanJapaneseForConditionalGeneration
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/owlv2.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# OWLv2
## Overview
OWLv2 was proposed in [Scaling Open-Vocabulary Object Detection](https://arxiv.org/abs/2306.09683) by Matthias Minderer, Alexey Gritsenko, Neil Houlsby. OWLv2 scales up [OWL-ViT](owlvit) using self-training, which uses an existing detector to generate pseudo-box annotations on image-text pairs. This results in large gains over the previous state-of-the-art for zero-shot object detection.
The abstract from the paper is the following:
*Open-vocabulary object detection has benefited greatly from pretrained vision-language models, but is still limited by the amount of available detection training data. While detection training data can be expanded by using Web image-text pairs as weak supervision, this has not been done at scales comparable to image-level pretraining. Here, we scale up detection data with self-training, which uses an existing detector to generate pseudo-box annotations on image-text pairs. Major challenges in scaling self-training are the choice of label space, pseudo-annotation filtering, and training efficiency. We present the OWLv2 model and OWL-ST self-training recipe, which address these challenges. OWLv2 surpasses the performance of previous state-of-the-art open-vocabulary detectors already at comparable training scales (~10M examples). However, with OWL-ST, we can scale to over 1B examples, yielding further large improvement: With an L/14 architecture, OWL-ST improves AP on LVIS rare classes, for which the model has seen no human box annotations, from 31.2% to 44.6% (43% relative improvement). OWL-ST unlocks Web-scale training for open-world localization, similar to what has been seen for image classification and language modelling.*
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/model_doc/owlv2_overview.png"
alt="drawing" width="600"/>
<small> OWLv2 high-level overview. Taken from the <a href="https://arxiv.org/abs/2306.09683">original paper</a>. </small>
This model was contributed by [nielsr](https://huggingface.co/nielsr).
The original code can be found [here](https://github.com/google-research/scenic/tree/main/scenic/projects/owl_vit).
## Usage example
OWLv2 is, just like its predecessor [OWL-ViT](owlvit), a zero-shot text-conditioned object detection model. OWL-ViT uses [CLIP](clip) as its multi-modal backbone, with a ViT-like Transformer to get visual features and a causal language model to get the text features. To use CLIP for detection, OWL-ViT removes the final token pooling layer of the vision model and attaches a lightweight classification and box head to each transformer output token. Open-vocabulary classification is enabled by replacing the fixed classification layer weights with the class-name embeddings obtained from the text model. The authors first train CLIP from scratch and fine-tune it end-to-end with the classification and box heads on standard detection datasets using a bipartite matching loss. One or multiple text queries per image can be used to perform zero-shot text-conditioned object detection.
[`Owlv2ImageProcessor`] can be used to resize (or rescale) and normalize images for the model and [`CLIPTokenizer`] is used to encode the text. [`Owlv2Processor`] wraps [`Owlv2ImageProcessor`] and [`CLIPTokenizer`] into a single instance to both encode the text and prepare the images. The following example shows how to perform object detection using [`Owlv2Processor`] and [`Owlv2ForObjectDetection`].
```python
>>> import requests
>>> from PIL import Image
>>> import torch
>>> from transformers import Owlv2Processor, Owlv2ForObjectDetection
>>> processor = Owlv2Processor.from_pretrained("google/owlv2-base-patch16-ensemble")
>>> model = Owlv2ForObjectDetection.from_pretrained("google/owlv2-base-patch16-ensemble")
>>> url = "http://images.cocodataset.org/val2017/000000039769.jpg"
>>> image = Image.open(requests.get(url, stream=True).raw)
>>> texts = [["a photo of a cat", "a photo of a dog"]]
>>> inputs = processor(text=texts, images=image, return_tensors="pt")
>>> outputs = model(**inputs)
>>> # Target image sizes (height, width) to rescale box predictions [batch_size, 2]
>>> target_sizes = torch.Tensor([image.size[::-1]])
>>> # Convert outputs (bounding boxes and class logits) to Pascal VOC Format (xmin, ymin, xmax, ymax)
>>> results = processor.post_process_object_detection(outputs=outputs, target_sizes=target_sizes, threshold=0.1)
>>> i = 0 # Retrieve predictions for the first image for the corresponding text queries
>>> text = texts[i]
>>> boxes, scores, labels = results[i]["boxes"], results[i]["scores"], results[i]["labels"]
>>> for box, score, label in zip(boxes, scores, labels):
... box = [round(i, 2) for i in box.tolist()]
... print(f"Detected {text[label]} with confidence {round(score.item(), 3)} at location {box}")
Detected a photo of a cat with confidence 0.614 at location [341.67, 17.54, 642.32, 278.51]
Detected a photo of a cat with confidence 0.665 at location [6.75, 38.97, 326.62, 354.85]
```
## Resources
- A demo notebook on using OWLv2 for zero- and one-shot (image-guided) object detection can be found [here](https://github.com/NielsRogge/Transformers-Tutorials/tree/master/OWLv2).
- [Zero-shot object detection task guide](../tasks/zero_shot_object_detection)
<Tip>
The architecture of OWLv2 is identical to [OWL-ViT](owlvit), however the object detection head now also includes an objectness classifier, which predicts the (query-agnostic) likelihood that a predicted box contains an object (as opposed to background). The objectness score can be used to rank or filter predictions independently of text queries.
Usage of OWLv2 is identical to [OWL-ViT](owlvit) with a new, updated image processor ([`Owlv2ImageProcessor`]).
</Tip>
## Owlv2Config
[[autodoc]] Owlv2Config
- from_text_vision_configs
## Owlv2TextConfig
[[autodoc]] Owlv2TextConfig
## Owlv2VisionConfig
[[autodoc]] Owlv2VisionConfig
## Owlv2ImageProcessor
[[autodoc]] Owlv2ImageProcessor
- preprocess
- post_process_object_detection
- post_process_image_guided_detection
## Owlv2Processor
[[autodoc]] Owlv2Processor
## Owlv2Model
[[autodoc]] Owlv2Model
- forward
- get_text_features
- get_image_features
## Owlv2TextModel
[[autodoc]] Owlv2TextModel
- forward
## Owlv2VisionModel
[[autodoc]] Owlv2VisionModel
- forward
## Owlv2ForObjectDetection
[[autodoc]] Owlv2ForObjectDetection
- forward
- image_guided_detection
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/gpt2.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# OpenAI GPT2
<div class="flex flex-wrap space-x-1">
<a href="https://huggingface.co/models?filter=gpt2">
<img alt="Models" src="https://img.shields.io/badge/All_model_pages-gpt2-blueviolet">
</a>
<a href="https://huggingface.co/spaces/docs-demos/gpt2">
<img alt="Spaces" src="https://img.shields.io/badge/%F0%9F%A4%97%20Hugging%20Face-Spaces-blue">
</a>
</div>
## Overview
OpenAI GPT-2 model was proposed in [Language Models are Unsupervised Multitask Learners](https://cdn.openai.com/better-language-models/language_models_are_unsupervised_multitask_learners.pdf) by Alec
Radford, Jeffrey Wu, Rewon Child, David Luan, Dario Amodei and Ilya Sutskever from [OpenAI](https://huggingface.co/openai). It's a causal (unidirectional)
transformer pretrained using language modeling on a very large corpus of ~40 GB of text data.
The abstract from the paper is the following:
*GPT-2 is a large transformer-based language model with 1.5 billion parameters, trained on a dataset[1] of 8 million
web pages. GPT-2 is trained with a simple objective: predict the next word, given all of the previous words within some
text. The diversity of the dataset causes this simple goal to contain naturally occurring demonstrations of many tasks
across diverse domains. GPT-2 is a direct scale-up of GPT, with more than 10X the parameters and trained on more than
10X the amount of data.*
[Write With Transformer](https://transformer.huggingface.co/doc/gpt2-large) is a webapp created and hosted by
Hugging Face showcasing the generative capabilities of several models. GPT-2 is one of them and is available in five
different sizes: small, medium, large, xl and a distilled version of the small checkpoint: *distilgpt-2*.
This model was contributed by [thomwolf](https://huggingface.co/thomwolf). The original code can be found [here](https://openai.com/blog/better-language-models/).
## Usage tips
- GPT-2 is a model with absolute position embeddings so it's usually advised to pad the inputs on the right rather than
the left.
- GPT-2 was trained with a causal language modeling (CLM) objective and is therefore powerful at predicting the next
token in a sequence. Leveraging this feature allows GPT-2 to generate syntactically coherent text as it can be
observed in the *run_generation.py* example script.
- The model can take the *past_key_values* (for PyTorch) or *past* (for TF) as input, which is the previously computed
key/value attention pairs. Using this (*past_key_values* or *past*) value prevents the model from re-computing
pre-computed values in the context of text generation. For PyTorch, see *past_key_values* argument of the
[`GPT2Model.forward`] method, or for TF the *past* argument of the
[`TFGPT2Model.call`] method for more information on its usage.
- Enabling the *scale_attn_by_inverse_layer_idx* and *reorder_and_upcast_attn* flags will apply the training stability
improvements from [Mistral](https://github.com/stanford-crfm/mistral/) (for PyTorch only).
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with GPT2. If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
<PipelineTag pipeline="text-generation"/>
- A blog on how to [Finetune a non-English GPT-2 Model with Hugging Face](https://www.philschmid.de/fine-tune-a-non-english-gpt-2-model-with-huggingface).
- A blog on [How to generate text: using different decoding methods for language generation with Transformers](https://huggingface.co/blog/how-to-generate) with GPT-2.
- A blog on [Training CodeParrot 🦜 from Scratch](https://huggingface.co/blog/codeparrot), a large GPT-2 model.
- A blog on [Faster Text Generation with TensorFlow and XLA](https://huggingface.co/blog/tf-xla-generate) with GPT-2.
- A blog on [How to train a Language Model with Megatron-LM](https://huggingface.co/blog/megatron-training) with a GPT-2 model.
- A notebook on how to [finetune GPT2 to generate lyrics in the style of your favorite artist](https://colab.research.google.com/github/AlekseyKorshuk/huggingartists/blob/master/huggingartists-demo.ipynb). 🌎
- A notebook on how to [finetune GPT2 to generate tweets in the style of your favorite Twitter user](https://colab.research.google.com/github/borisdayma/huggingtweets/blob/master/huggingtweets-demo.ipynb). 🌎
- [Causal language modeling](https://huggingface.co/course/en/chapter7/6?fw=pt#training-a-causal-language-model-from-scratch) chapter of the 🤗 Hugging Face Course.
- [`GPT2LMHeadModel`] is supported by this [causal language modeling example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/language-modeling#gpt-2gpt-and-causal-language-modeling), [text generation example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/text-generation), and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling.ipynb).
- [`TFGPT2LMHeadModel`] is supported by this [causal language modeling example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/language-modeling#run_clmpy) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling-tf.ipynb).
- [`FlaxGPT2LMHeadModel`] is supported by this [causal language modeling example script](https://github.com/huggingface/transformers/tree/main/examples/flax/language-modeling#causal-language-modeling) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/causal_language_modeling_flax.ipynb).
- [Text classification task guide](../tasks/sequence_classification)
- [Token classification task guide](../tasks/token_classification)
- [Causal language modeling task guide](../tasks/language_modeling)
## GPT2Config
[[autodoc]] GPT2Config
## GPT2Tokenizer
[[autodoc]] GPT2Tokenizer
- save_vocabulary
## GPT2TokenizerFast
[[autodoc]] GPT2TokenizerFast
## GPT2 specific outputs
[[autodoc]] models.gpt2.modeling_gpt2.GPT2DoubleHeadsModelOutput
[[autodoc]] models.gpt2.modeling_tf_gpt2.TFGPT2DoubleHeadsModelOutput
<frameworkcontent>
<pt>
## GPT2Model
[[autodoc]] GPT2Model
- forward
## GPT2LMHeadModel
[[autodoc]] GPT2LMHeadModel
- forward
## GPT2DoubleHeadsModel
[[autodoc]] GPT2DoubleHeadsModel
- forward
## GPT2ForQuestionAnswering
[[autodoc]] GPT2ForQuestionAnswering
- forward
## GPT2ForSequenceClassification
[[autodoc]] GPT2ForSequenceClassification
- forward
## GPT2ForTokenClassification
[[autodoc]] GPT2ForTokenClassification
- forward
</pt>
<tf>
## TFGPT2Model
[[autodoc]] TFGPT2Model
- call
## TFGPT2LMHeadModel
[[autodoc]] TFGPT2LMHeadModel
- call
## TFGPT2DoubleHeadsModel
[[autodoc]] TFGPT2DoubleHeadsModel
- call
## TFGPT2ForSequenceClassification
[[autodoc]] TFGPT2ForSequenceClassification
- call
## TFSequenceClassifierOutputWithPast
[[autodoc]] modeling_tf_outputs.TFSequenceClassifierOutputWithPast
## TFGPT2Tokenizer
[[autodoc]] TFGPT2Tokenizer
</tf>
<jax>
## FlaxGPT2Model
[[autodoc]] FlaxGPT2Model
- __call__
## FlaxGPT2LMHeadModel
[[autodoc]] FlaxGPT2LMHeadModel
- __call__
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/idefics.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# IDEFICS
## Overview
The IDEFICS model was proposed in [OBELICS: An Open Web-Scale Filtered Dataset of Interleaved Image-Text Documents
](https://huggingface.co/papers/2306.16527
) by Hugo Laurençon, Lucile Saulnier, Léo Tronchon, Stas Bekman, Amanpreet Singh, Anton Lozhkov, Thomas Wang, Siddharth Karamcheti, Alexander M. Rush, Douwe Kiela, Matthieu Cord, Victor Sanh
The abstract from the paper is the following:
*Large multimodal models trained on natural documents, which interleave images and text, outperform models trained on image-text pairs on various multimodal benchmarks that require reasoning over one or multiple images to generate a text. However, the datasets used to train these models have not been released, and the collection process has not been fully specified. We introduce the OBELICS dataset, an open web-scale filtered dataset of interleaved image-text documents comprising 141 million web pages extracted from Common Crawl, 353 million associated images, and 115 billion text tokens. We describe the dataset creation process, present comprehensive filtering rules, and provide an analysis of the dataset's content. To show the viability of OBELISC, we train an 80 billion parameters vision and language model on the dataset and obtain competitive performance on various multimodal benchmarks. We release the code to reproduce the dataset along with the dataset itself.*
This model was contributed by [HuggingFaceM4](https://huggingface.co/HuggingFaceM4). The original code can be found [here](<INSERT LINK TO GITHUB REPO HERE>). (TODO: don't have a public link yet).
<Tip warning={true}>
IDEFICS modeling code in Transformers is for finetuning and inferencing the pre-trained IDEFICS models.
To train a new IDEFICS model from scratch use the m4 codebase (a link will be provided once it's made public)
</Tip>
## IdeficsConfig
[[autodoc]] IdeficsConfig
## IdeficsModel
[[autodoc]] IdeficsModel
- forward
## IdeficsForVisionText2Text
[[autodoc]] IdeficsForVisionText2Text
- forward
## IdeficsImageProcessor
[[autodoc]] IdeficsImageProcessor
- preprocess
## IdeficsProcessor
[[autodoc]] IdeficsProcessor
- __call__
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/patchtst.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# PatchTST
## Overview
The PatchTST model was proposed in [A Time Series is Worth 64 Words: Long-term Forecasting with Transformers](https://arxiv.org/abs/2211.14730) by Yuqi Nie, Nam H. Nguyen, Phanwadee Sinthong and Jayant Kalagnanam.
At a high level the model vectorizes time series into patches of a given size and encodes the resulting sequence of vectors via a Transformer that then outputs the prediction length forecast via an appropriate head. The model is illustrated in the following figure:
The abstract from the paper is the following:
*We propose an efficient design of Transformer-based models for multivariate time series forecasting and self-supervised representation learning. It is based on two key components: (i) segmentation of time series into subseries-level patches which are served as input tokens to Transformer; (ii) channel-independence where each channel contains a single univariate time series that shares the same embedding and Transformer weights across all the series. Patching design naturally has three-fold benefit: local semantic information is retained in the embedding; computation and memory usage of the attention maps are quadratically reduced given the same look-back window; and the model can attend longer history. Our channel-independent patch time series Transformer (PatchTST) can improve the long-term forecasting accuracy significantly when compared with that of SOTA Transformer-based models. We also apply our model to self-supervised pre-training tasks and attain excellent fine-tuning performance, which outperforms supervised training on large datasets. Transferring of masked pre-trained representation on one dataset to others also produces SOTA forecasting accuracy.*
This model was contributed by [namctin](https://huggingface.co/namctin), [gsinthong](https://huggingface.co/gsinthong), [diepi](https://huggingface.co/diepi), [vijaye12](https://huggingface.co/vijaye12), [wmgifford](https://huggingface.co/wmgifford), and [kashif](https://huggingface.co/kashif). The original code can be found [here](https://github.com/yuqinie98/PatchTST).
## Usage tips
The model can also be used for time series classification and time series regression. See the respective [`PatchTSTForClassification`] and [`PatchTSTForRegression`] classes.
## PatchTSTConfig
[[autodoc]] PatchTSTConfig
## PatchTSTModel
[[autodoc]] PatchTSTModel
- forward
## PatchTSTForPrediction
[[autodoc]] PatchTSTForPrediction
- forward
## PatchTSTForClassification
[[autodoc]] PatchTSTForClassification
- forward
## PatchTSTForPretraining
[[autodoc]] PatchTSTForPretraining
- forward
## PatchTSTForRegression
[[autodoc]] PatchTSTForRegression
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/biogpt.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# BioGPT
## Overview
The BioGPT model was proposed in [BioGPT: generative pre-trained transformer for biomedical text generation and mining](https://academic.oup.com/bib/advance-article/doi/10.1093/bib/bbac409/6713511?guestAccessKey=a66d9b5d-4f83-4017-bb52-405815c907b9) by Renqian Luo, Liai Sun, Yingce Xia, Tao Qin, Sheng Zhang, Hoifung Poon and Tie-Yan Liu. BioGPT is a domain-specific generative pre-trained Transformer language model for biomedical text generation and mining. BioGPT follows the Transformer language model backbone, and is pre-trained on 15M PubMed abstracts from scratch.
The abstract from the paper is the following:
*Pre-trained language models have attracted increasing attention in the biomedical domain, inspired by their great success in the general natural language domain. Among the two main branches of pre-trained language models in the general language domain, i.e. BERT (and its variants) and GPT (and its variants), the first one has been extensively studied in the biomedical domain, such as BioBERT and PubMedBERT. While they have achieved great success on a variety of discriminative downstream biomedical tasks, the lack of generation ability constrains their application scope. In this paper, we propose BioGPT, a domain-specific generative Transformer language model pre-trained on large-scale biomedical literature. We evaluate BioGPT on six biomedical natural language processing tasks and demonstrate that our model outperforms previous models on most tasks. Especially, we get 44.98%, 38.42% and 40.76% F1 score on BC5CDR, KD-DTI and DDI end-to-end relation extraction tasks, respectively, and 78.2% accuracy on PubMedQA, creating a new record. Our case study on text generation further demonstrates the advantage of BioGPT on biomedical literature to generate fluent descriptions for biomedical terms.*
This model was contributed by [kamalkraj](https://huggingface.co/kamalkraj). The original code can be found [here](https://github.com/microsoft/BioGPT).
## Usage tips
- BioGPT is a model with absolute position embeddings so it's usually advised to pad the inputs on the right rather than the left.
- BioGPT was trained with a causal language modeling (CLM) objective and is therefore powerful at predicting the next token in a sequence. Leveraging this feature allows BioGPT to generate syntactically coherent text as it can be observed in the run_generation.py example script.
- The model can take the `past_key_values` (for PyTorch) as input, which is the previously computed key/value attention pairs. Using this (past_key_values or past) value prevents the model from re-computing pre-computed values in the context of text generation. For PyTorch, see past_key_values argument of the BioGptForCausalLM.forward() method for more information on its usage.
## Resources
- [Causal language modeling task guide](../tasks/language_modeling)
## BioGptConfig
[[autodoc]] BioGptConfig
## BioGptTokenizer
[[autodoc]] BioGptTokenizer
- save_vocabulary
## BioGptModel
[[autodoc]] BioGptModel
- forward
## BioGptForCausalLM
[[autodoc]] BioGptForCausalLM
- forward
## BioGptForTokenClassification
[[autodoc]] BioGptForTokenClassification
- forward
## BioGptForSequenceClassification
[[autodoc]] BioGptForSequenceClassification
- forward | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/camembert.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# CamemBERT
## Overview
The CamemBERT model was proposed in [CamemBERT: a Tasty French Language Model](https://arxiv.org/abs/1911.03894) by
Louis Martin, Benjamin Muller, Pedro Javier Ortiz Suárez, Yoann Dupont, Laurent Romary, Éric Villemonte de la
Clergerie, Djamé Seddah, and Benoît Sagot. It is based on Facebook's RoBERTa model released in 2019. It is a model
trained on 138GB of French text.
The abstract from the paper is the following:
*Pretrained language models are now ubiquitous in Natural Language Processing. Despite their success, most available
models have either been trained on English data or on the concatenation of data in multiple languages. This makes
practical use of such models --in all languages except English-- very limited. Aiming to address this issue for French,
we release CamemBERT, a French version of the Bi-directional Encoders for Transformers (BERT). We measure the
performance of CamemBERT compared to multilingual models in multiple downstream tasks, namely part-of-speech tagging,
dependency parsing, named-entity recognition, and natural language inference. CamemBERT improves the state of the art
for most of the tasks considered. We release the pretrained model for CamemBERT hoping to foster research and
downstream applications for French NLP.*
This model was contributed by [camembert](https://huggingface.co/camembert). The original code can be found [here](https://camembert-model.fr/).
<Tip>
This implementation is the same as RoBERTa. Refer to the [documentation of RoBERTa](roberta) for usage examples as well
as the information relative to the inputs and outputs.
</Tip>
## Resources
- [Text classification task guide](../tasks/sequence_classification)
- [Token classification task guide](../tasks/token_classification)
- [Question answering task guide](../tasks/question_answering)
- [Causal language modeling task guide](../tasks/language_modeling)
- [Masked language modeling task guide](../tasks/masked_language_modeling)
- [Multiple choice task guide](../tasks/multiple_choice)
## CamembertConfig
[[autodoc]] CamembertConfig
## CamembertTokenizer
[[autodoc]] CamembertTokenizer
- build_inputs_with_special_tokens
- get_special_tokens_mask
- create_token_type_ids_from_sequences
- save_vocabulary
## CamembertTokenizerFast
[[autodoc]] CamembertTokenizerFast
<frameworkcontent>
<pt>
## CamembertModel
[[autodoc]] CamembertModel
## CamembertForCausalLM
[[autodoc]] CamembertForCausalLM
## CamembertForMaskedLM
[[autodoc]] CamembertForMaskedLM
## CamembertForSequenceClassification
[[autodoc]] CamembertForSequenceClassification
## CamembertForMultipleChoice
[[autodoc]] CamembertForMultipleChoice
## CamembertForTokenClassification
[[autodoc]] CamembertForTokenClassification
## CamembertForQuestionAnswering
[[autodoc]] CamembertForQuestionAnswering
</pt>
<tf>
## TFCamembertModel
[[autodoc]] TFCamembertModel
## TFCamembertForCasualLM
[[autodoc]] TFCamembertForCausalLM
## TFCamembertForMaskedLM
[[autodoc]] TFCamembertForMaskedLM
## TFCamembertForSequenceClassification
[[autodoc]] TFCamembertForSequenceClassification
## TFCamembertForMultipleChoice
[[autodoc]] TFCamembertForMultipleChoice
## TFCamembertForTokenClassification
[[autodoc]] TFCamembertForTokenClassification
## TFCamembertForQuestionAnswering
[[autodoc]] TFCamembertForQuestionAnswering
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/distilbert.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# DistilBERT
<div class="flex flex-wrap space-x-1">
<a href="https://huggingface.co/models?filter=distilbert">
<img alt="Models" src="https://img.shields.io/badge/All_model_pages-distilbert-blueviolet">
</a>
<a href="https://huggingface.co/spaces/docs-demos/distilbert-base-uncased">
<img alt="Spaces" src="https://img.shields.io/badge/%F0%9F%A4%97%20Hugging%20Face-Spaces-blue">
</a>
<a href="https://huggingface.co/papers/1910.01108">
<img alt="Paper page" src="https://img.shields.io/badge/Paper%20page-1910.01108-green">
</a>
</div>
## Overview
The DistilBERT model was proposed in the blog post [Smaller, faster, cheaper, lighter: Introducing DistilBERT, a
distilled version of BERT](https://medium.com/huggingface/distilbert-8cf3380435b5), and the paper [DistilBERT, a
distilled version of BERT: smaller, faster, cheaper and lighter](https://arxiv.org/abs/1910.01108). DistilBERT is a
small, fast, cheap and light Transformer model trained by distilling BERT base. It has 40% less parameters than
*bert-base-uncased*, runs 60% faster while preserving over 95% of BERT's performances as measured on the GLUE language
understanding benchmark.
The abstract from the paper is the following:
*As Transfer Learning from large-scale pre-trained models becomes more prevalent in Natural Language Processing (NLP),
operating these large models in on-the-edge and/or under constrained computational training or inference budgets
remains challenging. In this work, we propose a method to pre-train a smaller general-purpose language representation
model, called DistilBERT, which can then be fine-tuned with good performances on a wide range of tasks like its larger
counterparts. While most prior work investigated the use of distillation for building task-specific models, we leverage
knowledge distillation during the pretraining phase and show that it is possible to reduce the size of a BERT model by
40%, while retaining 97% of its language understanding capabilities and being 60% faster. To leverage the inductive
biases learned by larger models during pretraining, we introduce a triple loss combining language modeling,
distillation and cosine-distance losses. Our smaller, faster and lighter model is cheaper to pre-train and we
demonstrate its capabilities for on-device computations in a proof-of-concept experiment and a comparative on-device
study.*
This model was contributed by [victorsanh](https://huggingface.co/victorsanh). This model jax version was
contributed by [kamalkraj](https://huggingface.co/kamalkraj). The original code can be found [here](https://github.com/huggingface/transformers/tree/main/examples/research_projects/distillation).
## Usage tips
- DistilBERT doesn't have `token_type_ids`, you don't need to indicate which token belongs to which segment. Just
separate your segments with the separation token `tokenizer.sep_token` (or `[SEP]`).
- DistilBERT doesn't have options to select the input positions (`position_ids` input). This could be added if
necessary though, just let us know if you need this option.
- Same as BERT but smaller. Trained by distillation of the pretrained BERT model, meaning it’s been trained to predict the same probabilities as the larger model. The actual objective is a combination of:
* finding the same probabilities as the teacher model
* predicting the masked tokens correctly (but no next-sentence objective)
* a cosine similarity between the hidden states of the student and the teacher model
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with DistilBERT. If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
<PipelineTag pipeline="text-classification"/>
- A blog post on [Getting Started with Sentiment Analysis using Python](https://huggingface.co/blog/sentiment-analysis-python) with DistilBERT.
- A blog post on how to [train DistilBERT with Blurr for sequence classification](https://huggingface.co/blog/fastai).
- A blog post on how to use [Ray to tune DistilBERT hyperparameters](https://huggingface.co/blog/ray-tune).
- A blog post on how to [train DistilBERT with Hugging Face and Amazon SageMaker](https://huggingface.co/blog/the-partnership-amazon-sagemaker-and-hugging-face).
- A notebook on how to [finetune DistilBERT for multi-label classification](https://colab.research.google.com/github/DhavalTaunk08/Transformers_scripts/blob/master/Transformers_multilabel_distilbert.ipynb). 🌎
- A notebook on how to [finetune DistilBERT for multiclass classification with PyTorch](https://colab.research.google.com/github/abhimishra91/transformers-tutorials/blob/master/transformers_multiclass_classification.ipynb). 🌎
- A notebook on how to [finetune DistilBERT for text classification in TensorFlow](https://colab.research.google.com/github/peterbayerle/huggingface_notebook/blob/main/distilbert_tf.ipynb). 🌎
- [`DistilBertForSequenceClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/text-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification.ipynb).
- [`TFDistilBertForSequenceClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/text-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification-tf.ipynb).
- [`FlaxDistilBertForSequenceClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/flax/text-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification_flax.ipynb).
- [Text classification task guide](../tasks/sequence_classification)
<PipelineTag pipeline="token-classification"/>
- [`DistilBertForTokenClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/token-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/token_classification.ipynb).
- [`TFDistilBertForTokenClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/token-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/token_classification-tf.ipynb).
- [`FlaxDistilBertForTokenClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/flax/token-classification).
- [Token classification](https://huggingface.co/course/chapter7/2?fw=pt) chapter of the 🤗 Hugging Face Course.
- [Token classification task guide](../tasks/token_classification)
<PipelineTag pipeline="fill-mask"/>
- [`DistilBertForMaskedLM`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/language-modeling#robertabertdistilbert-and-masked-language-modeling) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling.ipynb).
- [`TFDistilBertForMaskedLM`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/language-modeling#run_mlmpy) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling-tf.ipynb).
- [`FlaxDistilBertForMaskedLM`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/flax/language-modeling#masked-language-modeling) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/masked_language_modeling_flax.ipynb).
- [Masked language modeling](https://huggingface.co/course/chapter7/3?fw=pt) chapter of the 🤗 Hugging Face Course.
- [Masked language modeling task guide](../tasks/masked_language_modeling)
<PipelineTag pipeline="question-answering"/>
- [`DistilBertForQuestionAnswering`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/question-answering) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/question_answering.ipynb).
- [`TFDistilBertForQuestionAnswering`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/question-answering) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/question_answering-tf.ipynb).
- [`FlaxDistilBertForQuestionAnswering`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/flax/question-answering).
- [Question answering](https://huggingface.co/course/chapter7/7?fw=pt) chapter of the 🤗 Hugging Face Course.
- [Question answering task guide](../tasks/question_answering)
**Multiple choice**
- [`DistilBertForMultipleChoice`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/multiple-choice) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/multiple_choice.ipynb).
- [`TFDistilBertForMultipleChoice`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/multiple-choice) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/multiple_choice-tf.ipynb).
- [Multiple choice task guide](../tasks/multiple_choice)
⚗️ Optimization
- A blog post on how to [quantize DistilBERT with 🤗 Optimum and Intel](https://huggingface.co/blog/intel).
- A blog post on how [Optimizing Transformers for GPUs with 🤗 Optimum](https://www.philschmid.de/optimizing-transformers-with-optimum-gpu).
- A blog post on [Optimizing Transformers with Hugging Face Optimum](https://www.philschmid.de/optimizing-transformers-with-optimum).
⚡️ Inference
- A blog post on how to [Accelerate BERT inference with Hugging Face Transformers and AWS Inferentia](https://huggingface.co/blog/bert-inferentia-sagemaker) with DistilBERT.
- A blog post on [Serverless Inference with Hugging Face's Transformers, DistilBERT and Amazon SageMaker](https://www.philschmid.de/sagemaker-serverless-huggingface-distilbert).
🚀 Deploy
- A blog post on how to [deploy DistilBERT on Google Cloud](https://huggingface.co/blog/how-to-deploy-a-pipeline-to-google-clouds).
- A blog post on how to [deploy DistilBERT with Amazon SageMaker](https://huggingface.co/blog/deploy-hugging-face-models-easily-with-amazon-sagemaker).
- A blog post on how to [Deploy BERT with Hugging Face Transformers, Amazon SageMaker and Terraform module](https://www.philschmid.de/terraform-huggingface-amazon-sagemaker).
## Combining DistilBERT and Flash Attention 2
First, make sure to install the latest version of Flash Attention 2 to include the sliding window attention feature.
```bash
pip install -U flash-attn --no-build-isolation
```
Make also sure that you have a hardware that is compatible with Flash-Attention 2. Read more about it in the official documentation of flash-attn repository. Make also sure to load your model in half-precision (e.g. `torch.float16`)
To load and run a model using Flash Attention 2, refer to the snippet below:
```python
>>> import torch
>>> from transformers import AutoTokenizer, AutoModel
>>> device = "cuda" # the device to load the model onto
>>> tokenizer = AutoTokenizer.from_pretrained('distilbert-base-uncased')
>>> model = AutoModel.from_pretrained("distilbert-base-uncased", torch_dtype=torch.float16, attn_implementation="flash_attention_2")
>>> text = "Replace me by any text you'd like."
>>> encoded_input = tokenizer(text, return_tensors='pt').to(device)
>>> model.to(device)
>>> output = model(**encoded_input)
```
## DistilBertConfig
[[autodoc]] DistilBertConfig
## DistilBertTokenizer
[[autodoc]] DistilBertTokenizer
## DistilBertTokenizerFast
[[autodoc]] DistilBertTokenizerFast
<frameworkcontent>
<pt>
## DistilBertModel
[[autodoc]] DistilBertModel
- forward
## DistilBertForMaskedLM
[[autodoc]] DistilBertForMaskedLM
- forward
## DistilBertForSequenceClassification
[[autodoc]] DistilBertForSequenceClassification
- forward
## DistilBertForMultipleChoice
[[autodoc]] DistilBertForMultipleChoice
- forward
## DistilBertForTokenClassification
[[autodoc]] DistilBertForTokenClassification
- forward
## DistilBertForQuestionAnswering
[[autodoc]] DistilBertForQuestionAnswering
- forward
</pt>
<tf>
## TFDistilBertModel
[[autodoc]] TFDistilBertModel
- call
## TFDistilBertForMaskedLM
[[autodoc]] TFDistilBertForMaskedLM
- call
## TFDistilBertForSequenceClassification
[[autodoc]] TFDistilBertForSequenceClassification
- call
## TFDistilBertForMultipleChoice
[[autodoc]] TFDistilBertForMultipleChoice
- call
## TFDistilBertForTokenClassification
[[autodoc]] TFDistilBertForTokenClassification
- call
## TFDistilBertForQuestionAnswering
[[autodoc]] TFDistilBertForQuestionAnswering
- call
</tf>
<jax>
## FlaxDistilBertModel
[[autodoc]] FlaxDistilBertModel
- __call__
## FlaxDistilBertForMaskedLM
[[autodoc]] FlaxDistilBertForMaskedLM
- __call__
## FlaxDistilBertForSequenceClassification
[[autodoc]] FlaxDistilBertForSequenceClassification
- __call__
## FlaxDistilBertForMultipleChoice
[[autodoc]] FlaxDistilBertForMultipleChoice
- __call__
## FlaxDistilBertForTokenClassification
[[autodoc]] FlaxDistilBertForTokenClassification
- __call__
## FlaxDistilBertForQuestionAnswering
[[autodoc]] FlaxDistilBertForQuestionAnswering
- __call__
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/phi.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Phi
## Overview
The Phi-1 model was proposed in [Textbooks Are All You Need](https://arxiv.org/abs/2306.11644) by Suriya Gunasekar, Yi Zhang, Jyoti Aneja, Caio César Teodoro Mendes, Allie Del Giorno, Sivakanth Gopi, Mojan Javaheripi, Piero Kauffmann, Gustavo de Rosa, Olli Saarikivi, Adil Salim, Shital Shah, Harkirat Singh Behl, Xin Wang, Sébastien Bubeck, Ronen Eldan, Adam Tauman Kalai, Yin Tat Lee and Yuanzhi Li.
The Phi-1.5 model was proposed in [Textbooks Are All You Need II: phi-1.5 technical report](https://arxiv.org/abs/2309.05463) by Yuanzhi Li, Sébastien Bubeck, Ronen Eldan, Allie Del Giorno, Suriya Gunasekar and Yin Tat Lee.
### Summary
In Phi-1 and Phi-1.5 papers, the authors showed how important the quality of the data is in training relative to the model size.
They selected high quality "textbook" data alongside with synthetically generated data for training their small sized Transformer
based model Phi-1 with 1.3B parameters. Despite this small scale, phi-1 attains pass@1 accuracy 50.6% on HumanEval and 55.5% on MBPP.
They follow the same strategy for Phi-1.5 and created another 1.3B parameter model with performance on natural language tasks comparable
to models 5x larger, and surpassing most non-frontier LLMs. Phi-1.5 exhibits many of the traits of much larger LLMs such as the ability
to “think step by step” or perform some rudimentary in-context learning.
With these two experiments the authors successfully showed the huge impact of quality of training data when training machine learning models.
The abstract from the Phi-1 paper is the following:
*We introduce phi-1, a new large language model for code, with significantly smaller size than
competing models: phi-1 is a Transformer-based model with 1.3B parameters, trained for 4 days on
8 A100s, using a selection of “textbook quality” data from the web (6B tokens) and synthetically
generated textbooks and exercises with GPT-3.5 (1B tokens). Despite this small scale, phi-1 attains
pass@1 accuracy 50.6% on HumanEval and 55.5% on MBPP. It also displays surprising emergent
properties compared to phi-1-base, our model before our finetuning stage on a dataset of coding
exercises, and phi-1-small, a smaller model with 350M parameters trained with the same pipeline as
phi-1 that still achieves 45% on HumanEval.*
The abstract from the Phi-1.5 paper is the following:
*We continue the investigation into the power of smaller Transformer-based language models as
initiated by TinyStories – a 10 million parameter model that can produce coherent English – and
the follow-up work on phi-1, a 1.3 billion parameter model with Python coding performance close
to the state-of-the-art. The latter work proposed to use existing Large Language Models (LLMs) to
generate “textbook quality” data as a way to enhance the learning process compared to traditional
web data. We follow the “Textbooks Are All You Need” approach, focusing this time on common
sense reasoning in natural language, and create a new 1.3 billion parameter model named phi-1.5,
with performance on natural language tasks comparable to models 5x larger, and surpassing most
non-frontier LLMs on more complex reasoning tasks such as grade-school mathematics and basic
coding. More generally, phi-1.5 exhibits many of the traits of much larger LLMs, both good –such
as the ability to “think step by step” or perform some rudimentary in-context learning– and bad,
including hallucinations and the potential for toxic and biased generations –encouragingly though, we
are seeing improvement on that front thanks to the absence of web data. We open-source phi-1.5 to
promote further research on these urgent topics.*
This model was contributed by [Susnato Dhar](https://huggingface.co/susnato).
The original code for Phi-1, Phi-1.5 and Phi-2 can be found [here](https://huggingface.co/microsoft/phi-1), [here](https://huggingface.co/microsoft/phi-1_5) and [here](https://huggingface.co/microsoft/phi-2), respectively.
## Usage tips
- This model is quite similar to `Llama` with the main difference in [`PhiDecoderLayer`], where they used [`PhiAttention`] and [`PhiMLP`] layers in parallel configuration.
- The tokenizer used for this model is identical to the [`CodeGenTokenizer`].
## How to use Phi-2
<Tip warning={true}>
Phi-2 has been integrated in the development version (4.37.0.dev) of `transformers`. Until the official version is released through `pip`, ensure that you are doing one of the following:
* When loading the model, ensure that `trust_remote_code=True` is passed as an argument of the `from_pretrained()` function.
* Update your local `transformers` to the development version: `pip uninstall -y transformers && pip install git+https://github.com/huggingface/transformers`. The previous command is an alternative to cloning and installing from the source.
</Tip>
```python
>>> from transformers import AutoModelForCausalLM, AutoTokenizer
>>> model = AutoModelForCausalLM.from_pretrained("phi-2")
>>> tokenizer = AutoTokenizer.from_pretrained("phi-2")
>>> inputs = tokenizer('Can you help me write a formal email to a potential business partner proposing a joint venture?', return_tensors="pt", return_attention_mask=False)
>>> outputs = model.generate(**inputs, max_length=30)
>>> text = tokenizer.batch_decode(outputs)[0]
>>> print(text)
'Can you help me write a formal email to a potential business partner proposing a joint venture?\nInput: Company A: ABC Inc.\nCompany B: XYZ Ltd.\nJoint Venture: A new online platform for e-commerce'
```
### Example :
```python
>>> from transformers import PhiForCausalLM, AutoTokenizer
>>> # define the model and tokenizer.
>>> model = PhiForCausalLM.from_pretrained("microsoft/phi-1_5")
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/phi-1_5")
>>> # feel free to change the prompt to your liking.
>>> prompt = "If I were an AI that had just achieved"
>>> # apply the tokenizer.
>>> tokens = tokenizer(prompt, return_tensors="pt")
>>> # use the model to generate new tokens.
>>> generated_output = model.generate(**tokens, use_cache=True, max_new_tokens=10)
>>> tokenizer.batch_decode(generated_output)[0]
'If I were an AI that had just achieved a breakthrough in machine learning, I would be thrilled'
```
## Combining Phi and Flash Attention 2
First, make sure to install the latest version of Flash Attention 2 to include the sliding window attention feature.
```bash
pip install -U flash-attn --no-build-isolation
```
Make also sure that you have a hardware that is compatible with Flash-Attention 2. Read more about it in the official documentation of flash-attn repository. Make also sure to load your model in half-precision (e.g. `torch.float16``)
To load and run a model using Flash Attention 2, refer to the snippet below:
```python
>>> import torch
>>> from transformers import PhiForCausalLM, AutoTokenizer
>>> # define the model and tokenizer and push the model and tokens to the GPU.
>>> model = PhiForCausalLM.from_pretrained("microsoft/phi-1_5", torch_dtype=torch.float16, attn_implementation="flash_attention_2").to("cuda")
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/phi-1_5")
>>> # feel free to change the prompt to your liking.
>>> prompt = "If I were an AI that had just achieved"
>>> # apply the tokenizer.
>>> tokens = tokenizer(prompt, return_tensors="pt").to("cuda")
>>> # use the model to generate new tokens.
>>> generated_output = model.generate(**tokens, use_cache=True, max_new_tokens=10)
>>> tokenizer.batch_decode(generated_output)[0]
'If I were an AI that had just achieved a breakthrough in machine learning, I would be thrilled'
```
### Expected speedups
Below is an expected speedup diagram that compares pure inference time between the native implementation in transformers using `microsoft/phi-1` checkpoint and the Flash Attention 2 version of the model using a sequence length of 2048.
<div style="text-align: center">
<img src="https://huggingface.co/datasets/ybelkada/documentation-images/resolve/main/phi_1_speedup_plot.jpg">
</div>
## PhiConfig
[[autodoc]] PhiConfig
<frameworkcontent>
<pt>
## PhiModel
[[autodoc]] PhiModel
- forward
## PhiForCausalLM
[[autodoc]] PhiForCausalLM
- forward
- generate
## PhiForSequenceClassification
[[autodoc]] PhiForSequenceClassification
- forward
## PhiForTokenClassification
[[autodoc]] PhiForTokenClassification
- forward
</pt>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/speecht5.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# SpeechT5
## Overview
The SpeechT5 model was proposed in [SpeechT5: Unified-Modal Encoder-Decoder Pre-Training for Spoken Language Processing](https://arxiv.org/abs/2110.07205) by Junyi Ao, Rui Wang, Long Zhou, Chengyi Wang, Shuo Ren, Yu Wu, Shujie Liu, Tom Ko, Qing Li, Yu Zhang, Zhihua Wei, Yao Qian, Jinyu Li, Furu Wei.
The abstract from the paper is the following:
*Motivated by the success of T5 (Text-To-Text Transfer Transformer) in pre-trained natural language processing models, we propose a unified-modal SpeechT5 framework that explores the encoder-decoder pre-training for self-supervised speech/text representation learning. The SpeechT5 framework consists of a shared encoder-decoder network and six modal-specific (speech/text) pre/post-nets. After preprocessing the input speech/text through the pre-nets, the shared encoder-decoder network models the sequence-to-sequence transformation, and then the post-nets generate the output in the speech/text modality based on the output of the decoder. Leveraging large-scale unlabeled speech and text data, we pre-train SpeechT5 to learn a unified-modal representation, hoping to improve the modeling capability for both speech and text. To align the textual and speech information into this unified semantic space, we propose a cross-modal vector quantization approach that randomly mixes up speech/text states with latent units as the interface between encoder and decoder. Extensive evaluations show the superiority of the proposed SpeechT5 framework on a wide variety of spoken language processing tasks, including automatic speech recognition, speech synthesis, speech translation, voice conversion, speech enhancement, and speaker identification.*
This model was contributed by [Matthijs](https://huggingface.co/Matthijs). The original code can be found [here](https://github.com/microsoft/SpeechT5).
## SpeechT5Config
[[autodoc]] SpeechT5Config
## SpeechT5HifiGanConfig
[[autodoc]] SpeechT5HifiGanConfig
## SpeechT5Tokenizer
[[autodoc]] SpeechT5Tokenizer
- __call__
- save_vocabulary
- decode
- batch_decode
## SpeechT5FeatureExtractor
[[autodoc]] SpeechT5FeatureExtractor
- __call__
## SpeechT5Processor
[[autodoc]] SpeechT5Processor
- __call__
- pad
- from_pretrained
- save_pretrained
- batch_decode
- decode
## SpeechT5Model
[[autodoc]] SpeechT5Model
- forward
## SpeechT5ForSpeechToText
[[autodoc]] SpeechT5ForSpeechToText
- forward
## SpeechT5ForTextToSpeech
[[autodoc]] SpeechT5ForTextToSpeech
- forward
- generate
## SpeechT5ForSpeechToSpeech
[[autodoc]] SpeechT5ForSpeechToSpeech
- forward
- generate_speech
## SpeechT5HifiGan
[[autodoc]] SpeechT5HifiGan
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/nezha.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Nezha
## Overview
The Nezha model was proposed in [NEZHA: Neural Contextualized Representation for Chinese Language Understanding](https://arxiv.org/abs/1909.00204) by Junqiu Wei et al.
The abstract from the paper is the following:
*The pre-trained language models have achieved great successes in various natural language understanding (NLU) tasks
due to its capacity to capture the deep contextualized information in text by pre-training on large-scale corpora.
In this technical report, we present our practice of pre-training language models named NEZHA (NEural contextualiZed
representation for CHinese lAnguage understanding) on Chinese corpora and finetuning for the Chinese NLU tasks.
The current version of NEZHA is based on BERT with a collection of proven improvements, which include Functional
Relative Positional Encoding as an effective positional encoding scheme, Whole Word Masking strategy,
Mixed Precision Training and the LAMB Optimizer in training the models. The experimental results show that NEZHA
achieves the state-of-the-art performances when finetuned on several representative Chinese tasks, including
named entity recognition (People's Daily NER), sentence matching (LCQMC), Chinese sentiment classification (ChnSenti)
and natural language inference (XNLI).*
This model was contributed by [sijunhe](https://huggingface.co/sijunhe). The original code can be found [here](https://github.com/huawei-noah/Pretrained-Language-Model/tree/master/NEZHA-PyTorch).
## Resources
- [Text classification task guide](../tasks/sequence_classification)
- [Token classification task guide](../tasks/token_classification)
- [Question answering task guide](../tasks/question_answering)
- [Masked language modeling task guide](../tasks/masked_language_modeling)
- [Multiple choice task guide](../tasks/multiple_choice)
## NezhaConfig
[[autodoc]] NezhaConfig
## NezhaModel
[[autodoc]] NezhaModel
- forward
## NezhaForPreTraining
[[autodoc]] NezhaForPreTraining
- forward
## NezhaForMaskedLM
[[autodoc]] NezhaForMaskedLM
- forward
## NezhaForNextSentencePrediction
[[autodoc]] NezhaForNextSentencePrediction
- forward
## NezhaForSequenceClassification
[[autodoc]] NezhaForSequenceClassification
- forward
## NezhaForMultipleChoice
[[autodoc]] NezhaForMultipleChoice
- forward
## NezhaForTokenClassification
[[autodoc]] NezhaForTokenClassification
- forward
## NezhaForQuestionAnswering
[[autodoc]] NezhaForQuestionAnswering
- forward | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/deplot.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# DePlot
## Overview
DePlot was proposed in the paper [DePlot: One-shot visual language reasoning by plot-to-table translation](https://arxiv.org/abs/2212.10505) from Fangyu Liu, Julian Martin Eisenschlos, Francesco Piccinno, Syrine Krichene, Chenxi Pang, Kenton Lee, Mandar Joshi, Wenhu Chen, Nigel Collier, Yasemin Altun.
The abstract of the paper states the following:
*Visual language such as charts and plots is ubiquitous in the human world. Comprehending plots and charts requires strong reasoning skills. Prior state-of-the-art (SOTA) models require at least tens of thousands of training examples and their reasoning capabilities are still much limited, especially on complex human-written queries. This paper presents the first one-shot solution to visual language reasoning. We decompose the challenge of visual language reasoning into two steps: (1) plot-to-text translation, and (2) reasoning over the translated text. The key in this method is a modality conversion module, named as DePlot, which translates the image of a plot or chart to a linearized table. The output of DePlot can then be directly used to prompt a pretrained large language model (LLM), exploiting the few-shot reasoning capabilities of LLMs. To obtain DePlot, we standardize the plot-to-table task by establishing unified task formats and metrics, and train DePlot end-to-end on this task. DePlot can then be used off-the-shelf together with LLMs in a plug-and-play fashion. Compared with a SOTA model finetuned on more than >28k data points, DePlot+LLM with just one-shot prompting achieves a 24.0% improvement over finetuned SOTA on human-written queries from the task of chart QA.*
DePlot is a model that is trained using `Pix2Struct` architecture. You can find more information about `Pix2Struct` in the [Pix2Struct documentation](https://huggingface.co/docs/transformers/main/en/model_doc/pix2struct).
DePlot is a Visual Question Answering subset of `Pix2Struct` architecture. It renders the input question on the image and predicts the answer.
## Usage example
Currently one checkpoint is available for DePlot:
- `google/deplot`: DePlot fine-tuned on ChartQA dataset
```python
from transformers import AutoProcessor, Pix2StructForConditionalGeneration
import requests
from PIL import Image
model = Pix2StructForConditionalGeneration.from_pretrained("google/deplot")
processor = AutoProcessor.from_pretrained("google/deplot")
url = "https://raw.githubusercontent.com/vis-nlp/ChartQA/main/ChartQA%20Dataset/val/png/5090.png"
image = Image.open(requests.get(url, stream=True).raw)
inputs = processor(images=image, text="Generate underlying data table of the figure below:", return_tensors="pt")
predictions = model.generate(**inputs, max_new_tokens=512)
print(processor.decode(predictions[0], skip_special_tokens=True))
```
## Fine-tuning
To fine-tune DePlot, refer to the pix2struct [fine-tuning notebook](https://github.com/huggingface/notebooks/blob/main/examples/image_captioning_pix2struct.ipynb). For `Pix2Struct` models, we have found out that fine-tuning the model with Adafactor and cosine learning rate scheduler leads to faster convergence:
```python
from transformers.optimization import Adafactor, get_cosine_schedule_with_warmup
optimizer = Adafactor(self.parameters(), scale_parameter=False, relative_step=False, lr=0.01, weight_decay=1e-05)
scheduler = get_cosine_schedule_with_warmup(optimizer, num_warmup_steps=1000, num_training_steps=40000)
```
<Tip>
DePlot is a model trained using `Pix2Struct` architecture. For API reference, see [`Pix2Struct` documentation](pix2struct).
</Tip> | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/t5v1.1.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# T5v1.1
## Overview
T5v1.1 was released in the [google-research/text-to-text-transfer-transformer](https://github.com/google-research/text-to-text-transfer-transformer/blob/main/released_checkpoints.md#t511)
repository by Colin Raffel et al. It's an improved version of the original T5 model.
This model was contributed by [patrickvonplaten](https://huggingface.co/patrickvonplaten). The original code can be
found [here](https://github.com/google-research/text-to-text-transfer-transformer/blob/main/released_checkpoints.md#t511).
## Usage tips
One can directly plug in the weights of T5v1.1 into a T5 model, like so:
```python
>>> from transformers import T5ForConditionalGeneration
>>> model = T5ForConditionalGeneration.from_pretrained("google/t5-v1_1-base")
```
T5 Version 1.1 includes the following improvements compared to the original T5 model:
- GEGLU activation in the feed-forward hidden layer, rather than ReLU. See [this paper](https://arxiv.org/abs/2002.05202).
- Dropout was turned off in pre-training (quality win). Dropout should be re-enabled during fine-tuning.
- Pre-trained on C4 only without mixing in the downstream tasks.
- No parameter sharing between the embedding and classifier layer.
- "xl" and "xxl" replace "3B" and "11B". The model shapes are a bit different - larger `d_model` and smaller
`num_heads` and `d_ff`.
Note: T5 Version 1.1 was only pre-trained on [C4](https://huggingface.co/datasets/c4) excluding any supervised
training. Therefore, this model has to be fine-tuned before it is usable on a downstream task, unlike the original T5
model. Since t5v1.1 was pre-trained unsupervisedly, there's no real advantage to using a task prefix during single-task
fine-tuning. If you are doing multi-task fine-tuning, you should use a prefix.
Google has released the following variants:
- [google/t5-v1_1-small](https://huggingface.co/google/t5-v1_1-small)
- [google/t5-v1_1-base](https://huggingface.co/google/t5-v1_1-base)
- [google/t5-v1_1-large](https://huggingface.co/google/t5-v1_1-large)
- [google/t5-v1_1-xl](https://huggingface.co/google/t5-v1_1-xl)
- [google/t5-v1_1-xxl](https://huggingface.co/google/t5-v1_1-xxl).
<Tip>
Refer to [T5's documentation page](t5) for all API reference, tips, code examples and notebooks.
</Tip> | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/jukebox.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Jukebox
## Overview
The Jukebox model was proposed in [Jukebox: A generative model for music](https://arxiv.org/pdf/2005.00341.pdf)
by Prafulla Dhariwal, Heewoo Jun, Christine Payne, Jong Wook Kim, Alec Radford,
Ilya Sutskever. It introduces a generative music model which can produce minute long samples that can be conditioned on
an artist, genres and lyrics.
The abstract from the paper is the following:
*We introduce Jukebox, a model that generates music with singing in the raw audio domain. We tackle the long context of raw audio using a multiscale VQ-VAE to compress it to discrete codes, and modeling those using autoregressive Transformers. We show that the combined model at scale can generate high-fidelity and diverse songs with coherence up to multiple minutes. We can condition on artist and genre to steer the musical and vocal style, and on unaligned lyrics to make the singing more controllable. We are releasing thousands of non cherry-picked samples, along with model weights and code.*
As shown on the following figure, Jukebox is made of 3 `priors` which are decoder only models. They follow the architecture described in [Generating Long Sequences with Sparse Transformers](https://arxiv.org/abs/1904.10509), modified to support longer context length.
First, a autoencoder is used to encode the text lyrics. Next, the first (also called `top_prior`) prior attends to the last hidden states extracted from the lyrics encoder. The priors are linked to the previous priors respectively via an `AudioConditionner` module. The`AudioConditioner` upsamples the outputs of the previous prior to raw tokens at a certain audio frame per second resolution.
The metadata such as *artist, genre and timing* are passed to each prior, in the form of a start token and positional embedding for the timing data. The hidden states are mapped to the closest codebook vector from the VQVAE in order to convert them to raw audio.
This model was contributed by [Arthur Zucker](https://huggingface.co/ArthurZ).
The original code can be found [here](https://github.com/openai/jukebox).
## Usage tips
- This model only supports inference. This is for a few reasons, mostly because it requires a crazy amount of memory to train. Feel free to open a PR and add what's missing to have a full integration with the hugging face traineer!
- This model is very slow, and takes 8h to generate a minute long audio using the 5b top prior on a V100 GPU. In order automaticallay handle the device on which the model should execute, use `accelerate`.
- Contrary to the paper, the order of the priors goes from `0` to `1` as it felt more intuitive : we sample starting from `0`.
- Primed sampling (conditioning the sampling on raw audio) requires more memory than ancestral sampling and should be used with `fp16` set to `True`.
This model was contributed by [Arthur Zucker](https://huggingface.co/ArthurZ).
The original code can be found [here](https://github.com/openai/jukebox).
## JukeboxConfig
[[autodoc]] JukeboxConfig
## JukeboxPriorConfig
[[autodoc]] JukeboxPriorConfig
## JukeboxVQVAEConfig
[[autodoc]] JukeboxVQVAEConfig
## JukeboxTokenizer
[[autodoc]] JukeboxTokenizer
- save_vocabulary
## JukeboxModel
[[autodoc]] JukeboxModel
- ancestral_sample
- primed_sample
- continue_sample
- upsample
- _sample
## JukeboxPrior
[[autodoc]] JukeboxPrior
- sample
- forward
## JukeboxVQVAE
[[autodoc]] JukeboxVQVAE
- forward
- encode
- decode
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/git.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# GIT
## Overview
The GIT model was proposed in [GIT: A Generative Image-to-text Transformer for Vision and Language](https://arxiv.org/abs/2205.14100) by
Jianfeng Wang, Zhengyuan Yang, Xiaowei Hu, Linjie Li, Kevin Lin, Zhe Gan, Zicheng Liu, Ce Liu, Lijuan Wang. GIT is a decoder-only Transformer
that leverages [CLIP](clip)'s vision encoder to condition the model on vision inputs besides text. The model obtains state-of-the-art results on
image captioning and visual question answering benchmarks.
The abstract from the paper is the following:
*In this paper, we design and train a Generative Image-to-text Transformer, GIT, to unify vision-language tasks such as image/video captioning and question answering. While generative models provide a consistent network architecture between pre-training and fine-tuning, existing work typically contains complex structures (uni/multi-modal encoder/decoder) and depends on external modules such as object detectors/taggers and optical character recognition (OCR). In GIT, we simplify the architecture as one image encoder and one text decoder under a single language modeling task. We also scale up the pre-training data and the model size to boost the model performance. Without bells and whistles, our GIT establishes new state of the arts on 12 challenging benchmarks with a large margin. For instance, our model surpasses the human performance for the first time on TextCaps (138.2 vs. 125.5 in CIDEr). Furthermore, we present a new scheme of generation-based image classification and scene text recognition, achieving decent performance on standard benchmarks.*
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/model_doc/git_architecture.jpg"
alt="drawing" width="600"/>
<small> GIT architecture. Taken from the <a href="https://arxiv.org/abs/2205.14100" target="_blank">original paper</a>. </small>
This model was contributed by [nielsr](https://huggingface.co/nielsr).
The original code can be found [here](https://github.com/microsoft/GenerativeImage2Text).
## Usage tips
- GIT is implemented in a very similar way to GPT-2, the only difference being that the model is also conditioned on `pixel_values`.
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with GIT.
- Demo notebooks regarding inference + fine-tuning GIT on custom data can be found [here](https://github.com/NielsRogge/Transformers-Tutorials/tree/master/GIT).
- See also: [Causal language modeling task guide](../tasks/language_modeling)
If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we will review it.
The resource should ideally demonstrate something new instead of duplicating an existing resource.
## GitVisionConfig
[[autodoc]] GitVisionConfig
## GitVisionModel
[[autodoc]] GitVisionModel
- forward
## GitConfig
[[autodoc]] GitConfig
- all
## GitProcessor
[[autodoc]] GitProcessor
- __call__
## GitModel
[[autodoc]] GitModel
- forward
## GitForCausalLM
[[autodoc]] GitForCausalLM
- forward | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/bloom.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# BLOOM
## Overview
The BLOOM model has been proposed with its various versions through the [BigScience Workshop](https://bigscience.huggingface.co/). BigScience is inspired by other open science initiatives where researchers have pooled their time and resources to collectively achieve a higher impact.
The architecture of BLOOM is essentially similar to GPT3 (auto-regressive model for next token prediction), but has been trained on 46 different languages and 13 programming languages.
Several smaller versions of the models have been trained on the same dataset. BLOOM is available in the following versions:
- [bloom-560m](https://huggingface.co/bigscience/bloom-560m)
- [bloom-1b1](https://huggingface.co/bigscience/bloom-1b1)
- [bloom-1b7](https://huggingface.co/bigscience/bloom-1b7)
- [bloom-3b](https://huggingface.co/bigscience/bloom-3b)
- [bloom-7b1](https://huggingface.co/bigscience/bloom-7b1)
- [bloom](https://huggingface.co/bigscience/bloom) (176B parameters)
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with BLOOM. If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
<PipelineTag pipeline="text-generation"/>
- [`BloomForCausalLM`] is supported by this [causal language modeling example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/language-modeling#gpt-2gpt-and-causal-language-modeling) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling.ipynb).
See also:
- [Causal language modeling task guide](../tasks/language_modeling)
- [Text classification task guide](../tasks/sequence_classification)
- [Token classification task guide](../tasks/token_classification)
- [Question answering task guide](../tasks/question_answering)
⚡️ Inference
- A blog on [Optimization story: Bloom inference](https://huggingface.co/blog/bloom-inference-optimization).
- A blog on [Incredibly Fast BLOOM Inference with DeepSpeed and Accelerate](https://huggingface.co/blog/bloom-inference-pytorch-scripts).
⚙️ Training
- A blog on [The Technology Behind BLOOM Training](https://huggingface.co/blog/bloom-megatron-deepspeed).
## BloomConfig
[[autodoc]] BloomConfig
- all
## BloomTokenizerFast
[[autodoc]] BloomTokenizerFast
- all
<frameworkcontent>
<pt>
## BloomModel
[[autodoc]] BloomModel
- forward
## BloomForCausalLM
[[autodoc]] BloomForCausalLM
- forward
## BloomForSequenceClassification
[[autodoc]] BloomForSequenceClassification
- forward
## BloomForTokenClassification
[[autodoc]] BloomForTokenClassification
- forward
## BloomForQuestionAnswering
[[autodoc]] BloomForQuestionAnswering
- forward
</pt>
<jax>
## FlaxBloomModel
[[autodoc]] FlaxBloomModel
- __call__
## FlaxBloomForCausalLM
[[autodoc]] FlaxBloomForCausalLM
- __call__
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/byt5.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# ByT5
## Overview
The ByT5 model was presented in [ByT5: Towards a token-free future with pre-trained byte-to-byte models](https://arxiv.org/abs/2105.13626) by Linting Xue, Aditya Barua, Noah Constant, Rami Al-Rfou, Sharan Narang, Mihir
Kale, Adam Roberts, Colin Raffel.
The abstract from the paper is the following:
*Most widely-used pre-trained language models operate on sequences of tokens corresponding to word or subword units.
Encoding text as a sequence of tokens requires a tokenizer, which is typically created as an independent artifact from
the model. Token-free models that instead operate directly on raw text (bytes or characters) have many benefits: they
can process text in any language out of the box, they are more robust to noise, and they minimize technical debt by
removing complex and error-prone text preprocessing pipelines. Since byte or character sequences are longer than token
sequences, past work on token-free models has often introduced new model architectures designed to amortize the cost of
operating directly on raw text. In this paper, we show that a standard Transformer architecture can be used with
minimal modifications to process byte sequences. We carefully characterize the trade-offs in terms of parameter count,
training FLOPs, and inference speed, and show that byte-level models are competitive with their token-level
counterparts. We also demonstrate that byte-level models are significantly more robust to noise and perform better on
tasks that are sensitive to spelling and pronunciation. As part of our contribution, we release a new set of
pre-trained byte-level Transformer models based on the T5 architecture, as well as all code and data used in our
experiments.*
This model was contributed by [patrickvonplaten](https://huggingface.co/patrickvonplaten). The original code can be
found [here](https://github.com/google-research/byt5).
<Tip>
ByT5's architecture is based on the T5v1.1 model, refer to [T5v1.1's documentation page](t5v1.1) for the API reference. They
only differ in how inputs should be prepared for the model, see the code examples below.
</Tip>
Since ByT5 was pre-trained unsupervisedly, there's no real advantage to using a task prefix during single-task
fine-tuning. If you are doing multi-task fine-tuning, you should use a prefix.
## Usage example
ByT5 works on raw UTF-8 bytes, so it can be used without a tokenizer:
```python
>>> from transformers import T5ForConditionalGeneration
>>> import torch
>>> model = T5ForConditionalGeneration.from_pretrained("google/byt5-small")
>>> num_special_tokens = 3
>>> # Model has 3 special tokens which take up the input ids 0,1,2 of ByT5.
>>> # => Need to shift utf-8 character encodings by 3 before passing ids to model.
>>> input_ids = torch.tensor([list("Life is like a box of chocolates.".encode("utf-8"))]) + num_special_tokens
>>> labels = torch.tensor([list("La vie est comme une boîte de chocolat.".encode("utf-8"))]) + num_special_tokens
>>> loss = model(input_ids, labels=labels).loss
>>> loss.item()
2.66
```
For batched inference and training it is however recommended to make use of the tokenizer:
```python
>>> from transformers import T5ForConditionalGeneration, AutoTokenizer
>>> model = T5ForConditionalGeneration.from_pretrained("google/byt5-small")
>>> tokenizer = AutoTokenizer.from_pretrained("google/byt5-small")
>>> model_inputs = tokenizer(
... ["Life is like a box of chocolates.", "Today is Monday."], padding="longest", return_tensors="pt"
... )
>>> labels_dict = tokenizer(
... ["La vie est comme une boîte de chocolat.", "Aujourd'hui c'est lundi."], padding="longest", return_tensors="pt"
... )
>>> labels = labels_dict.input_ids
>>> loss = model(**model_inputs, labels=labels).loss
>>> loss.item()
17.9
```
Similar to [T5](t5), ByT5 was trained on the span-mask denoising task. However,
since the model works directly on characters, the pretraining task is a bit
different. Let's corrupt some characters of the
input sentence `"The dog chases a ball in the park."` and ask ByT5 to predict them
for us.
```python
>>> from transformers import AutoTokenizer, AutoModelForSeq2SeqLM
>>> import torch
>>> tokenizer = AutoTokenizer.from_pretrained("google/byt5-base")
>>> model = AutoModelForSeq2SeqLM.from_pretrained("google/byt5-base")
>>> input_ids_prompt = "The dog chases a ball in the park."
>>> input_ids = tokenizer(input_ids_prompt).input_ids
>>> # Note that we cannot add "{extra_id_...}" to the string directly
>>> # as the Byte tokenizer would incorrectly merge the tokens
>>> # For ByT5, we need to work directly on the character level
>>> # Contrary to T5, ByT5 does not use sentinel tokens for masking, but instead
>>> # uses final utf character ids.
>>> # UTF-8 is represented by 8 bits and ByT5 has 3 special tokens.
>>> # => There are 2**8+2 = 259 input ids and mask tokens count down from index 258.
>>> # => mask to "The dog [258]a ball [257]park."
>>> input_ids = torch.tensor([input_ids[:8] + [258] + input_ids[14:21] + [257] + input_ids[28:]])
>>> input_ids
tensor([[ 87, 107, 104, 35, 103, 114, 106, 35, 258, 35, 100, 35, 101, 100, 111, 111, 257, 35, 115, 100, 117, 110, 49, 1]])
>>> # ByT5 produces only one char at a time so we need to produce many more output characters here -> set `max_length=100`.
>>> output_ids = model.generate(input_ids, max_length=100)[0].tolist()
>>> output_ids
[0, 258, 108, 118, 35, 119, 107, 104, 35, 114, 113, 104, 35, 122, 107, 114, 35, 103, 114, 104, 118, 257, 35, 108, 113, 35, 119, 107, 104, 35, 103, 108, 118, 102, 114, 256, 108, 113, 35, 119, 107, 104, 35, 115, 100, 117, 110, 49, 35, 87, 107, 104, 35, 103, 114, 106, 35, 108, 118, 35, 119, 107, 104, 35, 114, 113, 104, 35, 122, 107, 114, 35, 103, 114, 104, 118, 35, 100, 35, 101, 100, 111, 111, 35, 108, 113, 255, 35, 108, 113, 35, 119, 107, 104, 35, 115, 100, 117, 110, 49]
>>> # ^- Note how 258 descends to 257, 256, 255
>>> # Now we need to split on the sentinel tokens, let's write a short loop for this
>>> output_ids_list = []
>>> start_token = 0
>>> sentinel_token = 258
>>> while sentinel_token in output_ids:
... split_idx = output_ids.index(sentinel_token)
... output_ids_list.append(output_ids[start_token:split_idx])
... start_token = split_idx
... sentinel_token -= 1
>>> output_ids_list.append(output_ids[start_token:])
>>> output_string = tokenizer.batch_decode(output_ids_list)
>>> output_string
['<pad>', 'is the one who does', ' in the disco', 'in the park. The dog is the one who does a ball in', ' in the park.']
```
## ByT5Tokenizer
[[autodoc]] ByT5Tokenizer
See [`ByT5Tokenizer`] for all details.
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/xmod.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# X-MOD
## Overview
The X-MOD model was proposed in [Lifting the Curse of Multilinguality by Pre-training Modular Transformers](http://dx.doi.org/10.18653/v1/2022.naacl-main.255) by Jonas Pfeiffer, Naman Goyal, Xi Lin, Xian Li, James Cross, Sebastian Riedel, and Mikel Artetxe.
X-MOD extends multilingual masked language models like [XLM-R](xlm-roberta) to include language-specific modular components (_language adapters_) during pre-training. For fine-tuning, the language adapters in each transformer layer are frozen.
The abstract from the paper is the following:
*Multilingual pre-trained models are known to suffer from the curse of multilinguality, which causes per-language performance to drop as they cover more languages. We address this issue by introducing language-specific modules, which allows us to grow the total capacity of the model, while keeping the total number of trainable parameters per language constant. In contrast with prior work that learns language-specific components post-hoc, we pre-train the modules of our Cross-lingual Modular (X-MOD) models from the start. Our experiments on natural language inference, named entity recognition and question answering show that our approach not only mitigates the negative interference between languages, but also enables positive transfer, resulting in improved monolingual and cross-lingual performance. Furthermore, our approach enables adding languages post-hoc with no measurable drop in performance, no longer limiting the model usage to the set of pre-trained languages.*
This model was contributed by [jvamvas](https://huggingface.co/jvamvas).
The original code can be found [here](https://github.com/facebookresearch/fairseq/tree/58cc6cca18f15e6d56e3f60c959fe4f878960a60/fairseq/models/xmod) and the original documentation is found [here](https://github.com/facebookresearch/fairseq/tree/58cc6cca18f15e6d56e3f60c959fe4f878960a60/examples/xmod).
## Usage tips
Tips:
- X-MOD is similar to [XLM-R](xlm-roberta), but a difference is that the input language needs to be specified so that the correct language adapter can be activated.
- The main models – base and large – have adapters for 81 languages.
## Adapter Usage
### Input language
There are two ways to specify the input language:
1. By setting a default language before using the model:
```python
from transformers import XmodModel
model = XmodModel.from_pretrained("facebook/xmod-base")
model.set_default_language("en_XX")
```
2. By explicitly passing the index of the language adapter for each sample:
```python
import torch
input_ids = torch.tensor(
[
[0, 581, 10269, 83, 99942, 136, 60742, 23, 70, 80583, 18276, 2],
[0, 1310, 49083, 443, 269, 71, 5486, 165, 60429, 660, 23, 2],
]
)
lang_ids = torch.LongTensor(
[
0, # en_XX
8, # de_DE
]
)
output = model(input_ids, lang_ids=lang_ids)
```
### Fine-tuning
The paper recommends that the embedding layer and the language adapters are frozen during fine-tuning. A method for doing this is provided:
```python
model.freeze_embeddings_and_language_adapters()
# Fine-tune the model ...
```
### Cross-lingual transfer
After fine-tuning, zero-shot cross-lingual transfer can be tested by activating the language adapter of the target language:
```python
model.set_default_language("de_DE")
# Evaluate the model on German examples ...
```
## Resources
- [Text classification task guide](../tasks/sequence_classification)
- [Token classification task guide](../tasks/token_classification)
- [Question answering task guide](../tasks/question_answering)
- [Causal language modeling task guide](../tasks/language_modeling)
- [Masked language modeling task guide](../tasks/masked_language_modeling)
- [Multiple choice task guide](../tasks/multiple_choice)
## XmodConfig
[[autodoc]] XmodConfig
## XmodModel
[[autodoc]] XmodModel
- forward
## XmodForCausalLM
[[autodoc]] XmodForCausalLM
- forward
## XmodForMaskedLM
[[autodoc]] XmodForMaskedLM
- forward
## XmodForSequenceClassification
[[autodoc]] XmodForSequenceClassification
- forward
## XmodForMultipleChoice
[[autodoc]] XmodForMultipleChoice
- forward
## XmodForTokenClassification
[[autodoc]] XmodForTokenClassification
- forward
## XmodForQuestionAnswering
[[autodoc]] XmodForQuestionAnswering
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/speech-encoder-decoder.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Speech Encoder Decoder Models
The [`SpeechEncoderDecoderModel`] can be used to initialize a speech-to-text model
with any pretrained speech autoencoding model as the encoder (*e.g.* [Wav2Vec2](wav2vec2), [Hubert](hubert)) and any pretrained autoregressive model as the decoder.
The effectiveness of initializing speech-sequence-to-text-sequence models with pretrained checkpoints for speech
recognition and speech translation has *e.g.* been shown in [Large-Scale Self- and Semi-Supervised Learning for Speech
Translation](https://arxiv.org/abs/2104.06678) by Changhan Wang, Anne Wu, Juan Pino, Alexei Baevski, Michael Auli,
Alexis Conneau.
An example of how to use a [`SpeechEncoderDecoderModel`] for inference can be seen in [Speech2Text2](speech_to_text_2).
## Randomly initializing `SpeechEncoderDecoderModel` from model configurations.
[`SpeechEncoderDecoderModel`] can be randomly initialized from an encoder and a decoder config. In the following example, we show how to do this using the default [`Wav2Vec2Model`] configuration for the encoder
and the default [`BertForCausalLM`] configuration for the decoder.
```python
>>> from transformers import BertConfig, Wav2Vec2Config, SpeechEncoderDecoderConfig, SpeechEncoderDecoderModel
>>> config_encoder = Wav2Vec2Config()
>>> config_decoder = BertConfig()
>>> config = SpeechEncoderDecoderConfig.from_encoder_decoder_configs(config_encoder, config_decoder)
>>> model = SpeechEncoderDecoderModel(config=config)
```
## Initialising `SpeechEncoderDecoderModel` from a pretrained encoder and a pretrained decoder.
[`SpeechEncoderDecoderModel`] can be initialized from a pretrained encoder checkpoint and a pretrained decoder checkpoint. Note that any pretrained Transformer-based speech model, *e.g.* [Wav2Vec2](wav2vec2), [Hubert](hubert) can serve as the encoder and both pretrained auto-encoding models, *e.g.* BERT, pretrained causal language models, *e.g.* GPT2, as well as the pretrained decoder part of sequence-to-sequence models, *e.g.* decoder of BART, can be used as the decoder.
Depending on which architecture you choose as the decoder, the cross-attention layers might be randomly initialized.
Initializing [`SpeechEncoderDecoderModel`] from a pretrained encoder and decoder checkpoint requires the model to be fine-tuned on a downstream task, as has been shown in [the *Warm-starting-encoder-decoder blog post*](https://huggingface.co/blog/warm-starting-encoder-decoder).
To do so, the `SpeechEncoderDecoderModel` class provides a [`SpeechEncoderDecoderModel.from_encoder_decoder_pretrained`] method.
```python
>>> from transformers import SpeechEncoderDecoderModel
>>> model = SpeechEncoderDecoderModel.from_encoder_decoder_pretrained(
... "facebook/hubert-large-ll60k", "bert-base-uncased"
... )
```
## Loading an existing `SpeechEncoderDecoderModel` checkpoint and perform inference.
To load fine-tuned checkpoints of the `SpeechEncoderDecoderModel` class, [`SpeechEncoderDecoderModel`] provides the `from_pretrained(...)` method just like any other model architecture in Transformers.
To perform inference, one uses the [`generate`] method, which allows to autoregressively generate text. This method supports various forms of decoding, such as greedy, beam search and multinomial sampling.
```python
>>> from transformers import Wav2Vec2Processor, SpeechEncoderDecoderModel
>>> from datasets import load_dataset
>>> import torch
>>> # load a fine-tuned speech translation model and corresponding processor
>>> model = SpeechEncoderDecoderModel.from_pretrained("facebook/wav2vec2-xls-r-300m-en-to-15")
>>> processor = Wav2Vec2Processor.from_pretrained("facebook/wav2vec2-xls-r-300m-en-to-15")
>>> # let's perform inference on a piece of English speech (which we'll translate to German)
>>> ds = load_dataset("hf-internal-testing/librispeech_asr_dummy", "clean", split="validation")
>>> input_values = processor(ds[0]["audio"]["array"], return_tensors="pt").input_values
>>> # autoregressively generate transcription (uses greedy decoding by default)
>>> generated_ids = model.generate(input_values)
>>> generated_text = processor.batch_decode(generated_ids, skip_special_tokens=True)[0]
>>> print(generated_text)
Mr. Quilter ist der Apostel der Mittelschicht und wir freuen uns, sein Evangelium willkommen heißen zu können.
```
## Training
Once the model is created, it can be fine-tuned similar to BART, T5 or any other encoder-decoder model on a dataset of (speech, text) pairs.
As you can see, only 2 inputs are required for the model in order to compute a loss: `input_values` (which are the
speech inputs) and `labels` (which are the `input_ids` of the encoded target sequence).
```python
>>> from transformers import AutoTokenizer, AutoFeatureExtractor, SpeechEncoderDecoderModel
>>> from datasets import load_dataset
>>> encoder_id = "facebook/wav2vec2-base-960h" # acoustic model encoder
>>> decoder_id = "bert-base-uncased" # text decoder
>>> feature_extractor = AutoFeatureExtractor.from_pretrained(encoder_id)
>>> tokenizer = AutoTokenizer.from_pretrained(decoder_id)
>>> # Combine pre-trained encoder and pre-trained decoder to form a Seq2Seq model
>>> model = SpeechEncoderDecoderModel.from_encoder_decoder_pretrained(encoder_id, decoder_id)
>>> model.config.decoder_start_token_id = tokenizer.cls_token_id
>>> model.config.pad_token_id = tokenizer.pad_token_id
>>> # load an audio input and pre-process (normalise mean/std to 0/1)
>>> ds = load_dataset("hf-internal-testing/librispeech_asr_dummy", "clean", split="validation")
>>> input_values = feature_extractor(ds[0]["audio"]["array"], return_tensors="pt").input_values
>>> # load its corresponding transcription and tokenize to generate labels
>>> labels = tokenizer(ds[0]["text"], return_tensors="pt").input_ids
>>> # the forward function automatically creates the correct decoder_input_ids
>>> loss = model(input_values=input_values, labels=labels).loss
>>> loss.backward()
```
## SpeechEncoderDecoderConfig
[[autodoc]] SpeechEncoderDecoderConfig
## SpeechEncoderDecoderModel
[[autodoc]] SpeechEncoderDecoderModel
- forward
- from_encoder_decoder_pretrained
## FlaxSpeechEncoderDecoderModel
[[autodoc]] FlaxSpeechEncoderDecoderModel
- __call__
- from_encoder_decoder_pretrained
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/clvp.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# CLVP
## Overview
The CLVP (Contrastive Language-Voice Pretrained Transformer) model was proposed in [Better speech synthesis through scaling](https://arxiv.org/abs/2305.07243) by James Betker.
The abstract from the paper is the following:
*In recent years, the field of image generation has been revolutionized by the application of autoregressive transformers and DDPMs. These approaches model the process of image generation as a step-wise probabilistic processes and leverage large amounts of compute and data to learn the image distribution. This methodology of improving performance need not be confined to images. This paper describes a way to apply advances in the image generative domain to speech synthesis. The result is TorToise - an expressive, multi-voice text-to-speech system.*
This model was contributed by [Susnato Dhar](https://huggingface.co/susnato).
The original code can be found [here](https://github.com/neonbjb/tortoise-tts).
## Usage tips
1. CLVP is an integral part of the Tortoise TTS model.
2. CLVP can be used to compare different generated speech candidates with the provided text, and the best speech tokens are forwarded to the diffusion model.
3. The use of the [`ClvpModelForConditionalGeneration.generate()`] method is strongly recommended for tortoise usage.
4. Note that the CLVP model expects the audio to be sampled at 22.05 kHz contrary to other audio models which expects 16 kHz.
## Brief Explanation:
- The [`ClvpTokenizer`] tokenizes the text input, and the [`ClvpFeatureExtractor`] extracts the log mel-spectrogram from the desired audio.
- [`ClvpConditioningEncoder`] takes those text tokens and audio representations and converts them into embeddings conditioned on the text and audio.
- The [`ClvpForCausalLM`] uses those embeddings to generate multiple speech candidates.
- Each speech candidate is passed through the speech encoder ([`ClvpEncoder`]) which converts them into a vector representation, and the text encoder ([`ClvpEncoder`]) converts the text tokens into the same latent space.
- At the end, we compare each speech vector with the text vector to see which speech vector is most similar to the text vector.
- [`ClvpModelForConditionalGeneration.generate()`] compresses all of the logic described above into a single method.
Example :
```python
>>> import datasets
>>> from transformers import ClvpProcessor, ClvpModelForConditionalGeneration
>>> # Define the Text and Load the Audio (We are taking an audio example from HuggingFace Hub using `datasets` library).
>>> text = "This is an example text."
>>> ds = datasets.load_dataset("hf-internal-testing/librispeech_asr_dummy", "clean", split="validation")
>>> ds = ds.cast_column("audio", datasets.Audio(sampling_rate=22050))
>>> sample = ds[0]["audio"]
>>> # Define processor and model.
>>> processor = ClvpProcessor.from_pretrained("susnato/clvp_dev")
>>> model = ClvpModelForConditionalGeneration.from_pretrained("susnato/clvp_dev")
>>> # Generate processor output and model output.
>>> processor_output = processor(raw_speech=sample["array"], sampling_rate=sample["sampling_rate"], text=text, return_tensors="pt")
>>> generated_output = model.generate(**processor_output)
```
## ClvpConfig
[[autodoc]] ClvpConfig
- from_sub_model_configs
## ClvpEncoderConfig
[[autodoc]] ClvpEncoderConfig
## ClvpDecoderConfig
[[autodoc]] ClvpDecoderConfig
## ClvpTokenizer
[[autodoc]] ClvpTokenizer
- save_vocabulary
## ClvpFeatureExtractor
[[autodoc]] ClvpFeatureExtractor
- __call__
## ClvpProcessor
[[autodoc]] ClvpProcessor
- __call__
- decode
- batch_decode
## ClvpModelForConditionalGeneration
[[autodoc]] ClvpModelForConditionalGeneration
- forward
- generate
- get_text_features
- get_speech_features
## ClvpForCausalLM
[[autodoc]] ClvpForCausalLM
## ClvpModel
[[autodoc]] ClvpModel
## ClvpEncoder
[[autodoc]] ClvpEncoder
## ClvpDecoder
[[autodoc]] ClvpDecoder
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/gptj.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# GPT-J
## Overview
The GPT-J model was released in the [kingoflolz/mesh-transformer-jax](https://github.com/kingoflolz/mesh-transformer-jax) repository by Ben Wang and Aran Komatsuzaki. It is a GPT-2-like
causal language model trained on [the Pile](https://pile.eleuther.ai/) dataset.
This model was contributed by [Stella Biderman](https://huggingface.co/stellaathena).
## Usage tips
- To load [GPT-J](https://huggingface.co/EleutherAI/gpt-j-6B) in float32 one would need at least 2x model size
RAM: 1x for initial weights and another 1x to load the checkpoint. So for GPT-J it would take at least 48GB
RAM to just load the model. To reduce the RAM usage there are a few options. The `torch_dtype` argument can be
used to initialize the model in half-precision on a CUDA device only. There is also a fp16 branch which stores the fp16 weights,
which could be used to further minimize the RAM usage:
```python
>>> from transformers import GPTJForCausalLM
>>> import torch
>>> device = "cuda"
>>> model = GPTJForCausalLM.from_pretrained(
... "EleutherAI/gpt-j-6B",
... revision="float16",
... torch_dtype=torch.float16,
... ).to(device)
```
- The model should fit on 16GB GPU for inference. For training/fine-tuning it would take much more GPU RAM. Adam
optimizer for example makes four copies of the model: model, gradients, average and squared average of the gradients.
So it would need at least 4x model size GPU memory, even with mixed precision as gradient updates are in fp32. This
is not including the activations and data batches, which would again require some more GPU RAM. So one should explore
solutions such as DeepSpeed, to train/fine-tune the model. Another option is to use the original codebase to
train/fine-tune the model on TPU and then convert the model to Transformers format for inference. Instructions for
that could be found [here](https://github.com/kingoflolz/mesh-transformer-jax/blob/master/howto_finetune.md)
- Although the embedding matrix has a size of 50400, only 50257 entries are used by the GPT-2 tokenizer. These extra
tokens are added for the sake of efficiency on TPUs. To avoid the mismatch between embedding matrix size and vocab
size, the tokenizer for [GPT-J](https://huggingface.co/EleutherAI/gpt-j-6B) contains 143 extra tokens
`<|extratoken_1|>... <|extratoken_143|>`, so the `vocab_size` of tokenizer also becomes 50400.
## Usage examples
The [`~generation.GenerationMixin.generate`] method can be used to generate text using GPT-J
model.
```python
>>> from transformers import AutoModelForCausalLM, AutoTokenizer
>>> model = AutoModelForCausalLM.from_pretrained("EleutherAI/gpt-j-6B")
>>> tokenizer = AutoTokenizer.from_pretrained("EleutherAI/gpt-j-6B")
>>> prompt = (
... "In a shocking finding, scientists discovered a herd of unicorns living in a remote, "
... "previously unexplored valley, in the Andes Mountains. Even more surprising to the "
... "researchers was the fact that the unicorns spoke perfect English."
... )
>>> input_ids = tokenizer(prompt, return_tensors="pt").input_ids
>>> gen_tokens = model.generate(
... input_ids,
... do_sample=True,
... temperature=0.9,
... max_length=100,
... )
>>> gen_text = tokenizer.batch_decode(gen_tokens)[0]
```
...or in float16 precision:
```python
>>> from transformers import GPTJForCausalLM, AutoTokenizer
>>> import torch
>>> device = "cuda"
>>> model = GPTJForCausalLM.from_pretrained("EleutherAI/gpt-j-6B", torch_dtype=torch.float16).to(device)
>>> tokenizer = AutoTokenizer.from_pretrained("EleutherAI/gpt-j-6B")
>>> prompt = (
... "In a shocking finding, scientists discovered a herd of unicorns living in a remote, "
... "previously unexplored valley, in the Andes Mountains. Even more surprising to the "
... "researchers was the fact that the unicorns spoke perfect English."
... )
>>> input_ids = tokenizer(prompt, return_tensors="pt").input_ids.to(device)
>>> gen_tokens = model.generate(
... input_ids,
... do_sample=True,
... temperature=0.9,
... max_length=100,
... )
>>> gen_text = tokenizer.batch_decode(gen_tokens)[0]
```
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with GPT-J. If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
<PipelineTag pipeline="text-generation"/>
- Description of [GPT-J](https://huggingface.co/EleutherAI/gpt-j-6B).
- A blog on how to [Deploy GPT-J 6B for inference using Hugging Face Transformers and Amazon SageMaker](https://huggingface.co/blog/gptj-sagemaker).
- A blog on how to [Accelerate GPT-J inference with DeepSpeed-Inference on GPUs](https://www.philschmid.de/gptj-deepspeed-inference).
- A blog post introducing [GPT-J-6B: 6B JAX-Based Transformer](https://arankomatsuzaki.wordpress.com/2021/06/04/gpt-j/). 🌎
- A notebook for [GPT-J-6B Inference Demo](https://colab.research.google.com/github/kingoflolz/mesh-transformer-jax/blob/master/colab_demo.ipynb). 🌎
- Another notebook demonstrating [Inference with GPT-J-6B](https://colab.research.google.com/github/NielsRogge/Transformers-Tutorials/blob/master/GPT-J-6B/Inference_with_GPT_J_6B.ipynb).
- [Causal language modeling](https://huggingface.co/course/en/chapter7/6?fw=pt#training-a-causal-language-model-from-scratch) chapter of the 🤗 Hugging Face Course.
- [`GPTJForCausalLM`] is supported by this [causal language modeling example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/language-modeling#gpt-2gpt-and-causal-language-modeling), [text generation example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/text-generation), and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling.ipynb).
- [`TFGPTJForCausalLM`] is supported by this [causal language modeling example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/language-modeling#run_clmpy) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling-tf.ipynb).
- [`FlaxGPTJForCausalLM`] is supported by this [causal language modeling example script](https://github.com/huggingface/transformers/tree/main/examples/flax/language-modeling#causal-language-modeling) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/causal_language_modeling_flax.ipynb).
**Documentation resources**
- [Text classification task guide](../tasks/sequence_classification)
- [Question answering task guide](../tasks/question_answering)
- [Causal language modeling task guide](../tasks/language_modeling)
## GPTJConfig
[[autodoc]] GPTJConfig
- all
<frameworkcontent>
<pt>
## GPTJModel
[[autodoc]] GPTJModel
- forward
## GPTJForCausalLM
[[autodoc]] GPTJForCausalLM
- forward
## GPTJForSequenceClassification
[[autodoc]] GPTJForSequenceClassification
- forward
## GPTJForQuestionAnswering
[[autodoc]] GPTJForQuestionAnswering
- forward
</pt>
<tf>
## TFGPTJModel
[[autodoc]] TFGPTJModel
- call
## TFGPTJForCausalLM
[[autodoc]] TFGPTJForCausalLM
- call
## TFGPTJForSequenceClassification
[[autodoc]] TFGPTJForSequenceClassification
- call
## TFGPTJForQuestionAnswering
[[autodoc]] TFGPTJForQuestionAnswering
- call
</tf>
<jax>
## FlaxGPTJModel
[[autodoc]] FlaxGPTJModel
- __call__
## FlaxGPTJForCausalLM
[[autodoc]] FlaxGPTJForCausalLM
- __call__
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/albert.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# ALBERT
<div class="flex flex-wrap space-x-1">
<a href="https://huggingface.co/models?filter=albert">
<img alt="Models" src="https://img.shields.io/badge/All_model_pages-albert-blueviolet">
</a>
<a href="https://huggingface.co/spaces/docs-demos/albert-base-v2">
<img alt="Spaces" src="https://img.shields.io/badge/%F0%9F%A4%97%20Hugging%20Face-Spaces-blue">
</a>
</div>
## Overview
The ALBERT model was proposed in [ALBERT: A Lite BERT for Self-supervised Learning of Language Representations](https://arxiv.org/abs/1909.11942) by Zhenzhong Lan, Mingda Chen, Sebastian Goodman, Kevin Gimpel, Piyush Sharma,
Radu Soricut. It presents two parameter-reduction techniques to lower memory consumption and increase the training
speed of BERT:
- Splitting the embedding matrix into two smaller matrices.
- Using repeating layers split among groups.
The abstract from the paper is the following:
*Increasing model size when pretraining natural language representations often results in improved performance on
downstream tasks. However, at some point further model increases become harder due to GPU/TPU memory limitations,
longer training times, and unexpected model degradation. To address these problems, we present two parameter-reduction
techniques to lower memory consumption and increase the training speed of BERT. Comprehensive empirical evidence shows
that our proposed methods lead to models that scale much better compared to the original BERT. We also use a
self-supervised loss that focuses on modeling inter-sentence coherence, and show it consistently helps downstream tasks
with multi-sentence inputs. As a result, our best model establishes new state-of-the-art results on the GLUE, RACE, and
SQuAD benchmarks while having fewer parameters compared to BERT-large.*
This model was contributed by [lysandre](https://huggingface.co/lysandre). This model jax version was contributed by
[kamalkraj](https://huggingface.co/kamalkraj). The original code can be found [here](https://github.com/google-research/ALBERT).
## Usage tips
- ALBERT is a model with absolute position embeddings so it's usually advised to pad the inputs on the right rather
than the left.
- ALBERT uses repeating layers which results in a small memory footprint, however the computational cost remains
similar to a BERT-like architecture with the same number of hidden layers as it has to iterate through the same
number of (repeating) layers.
- Embedding size E is different from hidden size H justified because the embeddings are context independent (one embedding vector represents one token), whereas hidden states are context dependent (one hidden state represents a sequence of tokens) so it's more logical to have H >> E. Also, the embedding matrix is large since it's V x E (V being the vocab size). If E < H, it has less parameters.
- Layers are split in groups that share parameters (to save memory).
Next sentence prediction is replaced by a sentence ordering prediction: in the inputs, we have two sentences A and B (that are consecutive) and we either feed A followed by B or B followed by A. The model must predict if they have been swapped or not.
This model was contributed by [lysandre](https://huggingface.co/lysandre). This model jax version was contributed by
[kamalkraj](https://huggingface.co/kamalkraj). The original code can be found [here](https://github.com/google-research/ALBERT).
## Resources
The resources provided in the following sections consist of a list of official Hugging Face and community (indicated by 🌎) resources to help you get started with AlBERT. If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
<PipelineTag pipeline="text-classification"/>
- [`AlbertForSequenceClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/text-classification).
- [`TFAlbertForSequenceClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/text-classification).
- [`FlaxAlbertForSequenceClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/flax/text-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification_flax.ipynb).
- Check the [Text classification task guide](../tasks/sequence_classification) on how to use the model.
<PipelineTag pipeline="token-classification"/>
- [`AlbertForTokenClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/token-classification).
- [`TFAlbertForTokenClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/token-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/token_classification-tf.ipynb).
- [`FlaxAlbertForTokenClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/flax/token-classification).
- [Token classification](https://huggingface.co/course/chapter7/2?fw=pt) chapter of the 🤗 Hugging Face Course.
- Check the [Token classification task guide](../tasks/token_classification) on how to use the model.
<PipelineTag pipeline="fill-mask"/>
- [`AlbertForMaskedLM`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/language-modeling#robertabertdistilbert-and-masked-language-modeling) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling.ipynb).
- [`TFAlbertForMaskedLM`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/language-modeling#run_mlmpy) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling-tf.ipynb).
- [`FlaxAlbertForMaskedLM`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/flax/language-modeling#masked-language-modeling) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/masked_language_modeling_flax.ipynb).
- [Masked language modeling](https://huggingface.co/course/chapter7/3?fw=pt) chapter of the 🤗 Hugging Face Course.
- Check the [Masked language modeling task guide](../tasks/masked_language_modeling) on how to use the model.
<PipelineTag pipeline="question-answering"/>
- [`AlbertForQuestionAnswering`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/question-answering) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/question_answering.ipynb).
- [`TFAlbertForQuestionAnswering`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/question-answering) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/question_answering-tf.ipynb).
- [`FlaxAlbertForQuestionAnswering`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/flax/question-answering).
- [Question answering](https://huggingface.co/course/chapter7/7?fw=pt) chapter of the 🤗 Hugging Face Course.
- Check the [Question answering task guide](../tasks/question_answering) on how to use the model.
**Multiple choice**
- [`AlbertForMultipleChoice`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/multiple-choice) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/multiple_choice.ipynb).
- [`TFAlbertForMultipleChoice`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/tensorflow/multiple-choice) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/multiple_choice-tf.ipynb).
- Check the [Multiple choice task guide](../tasks/multiple_choice) on how to use the model.
## AlbertConfig
[[autodoc]] AlbertConfig
## AlbertTokenizer
[[autodoc]] AlbertTokenizer
- build_inputs_with_special_tokens
- get_special_tokens_mask
- create_token_type_ids_from_sequences
- save_vocabulary
## AlbertTokenizerFast
[[autodoc]] AlbertTokenizerFast
## Albert specific outputs
[[autodoc]] models.albert.modeling_albert.AlbertForPreTrainingOutput
[[autodoc]] models.albert.modeling_tf_albert.TFAlbertForPreTrainingOutput
<frameworkcontent>
<pt>
## AlbertModel
[[autodoc]] AlbertModel
- forward
## AlbertForPreTraining
[[autodoc]] AlbertForPreTraining
- forward
## AlbertForMaskedLM
[[autodoc]] AlbertForMaskedLM
- forward
## AlbertForSequenceClassification
[[autodoc]] AlbertForSequenceClassification
- forward
## AlbertForMultipleChoice
[[autodoc]] AlbertForMultipleChoice
## AlbertForTokenClassification
[[autodoc]] AlbertForTokenClassification
- forward
## AlbertForQuestionAnswering
[[autodoc]] AlbertForQuestionAnswering
- forward
</pt>
<tf>
## TFAlbertModel
[[autodoc]] TFAlbertModel
- call
## TFAlbertForPreTraining
[[autodoc]] TFAlbertForPreTraining
- call
## TFAlbertForMaskedLM
[[autodoc]] TFAlbertForMaskedLM
- call
## TFAlbertForSequenceClassification
[[autodoc]] TFAlbertForSequenceClassification
- call
## TFAlbertForMultipleChoice
[[autodoc]] TFAlbertForMultipleChoice
- call
## TFAlbertForTokenClassification
[[autodoc]] TFAlbertForTokenClassification
- call
## TFAlbertForQuestionAnswering
[[autodoc]] TFAlbertForQuestionAnswering
- call
</tf>
<jax>
## FlaxAlbertModel
[[autodoc]] FlaxAlbertModel
- __call__
## FlaxAlbertForPreTraining
[[autodoc]] FlaxAlbertForPreTraining
- __call__
## FlaxAlbertForMaskedLM
[[autodoc]] FlaxAlbertForMaskedLM
- __call__
## FlaxAlbertForSequenceClassification
[[autodoc]] FlaxAlbertForSequenceClassification
- __call__
## FlaxAlbertForMultipleChoice
[[autodoc]] FlaxAlbertForMultipleChoice
- __call__
## FlaxAlbertForTokenClassification
[[autodoc]] FlaxAlbertForTokenClassification
- __call__
## FlaxAlbertForQuestionAnswering
[[autodoc]] FlaxAlbertForQuestionAnswering
- __call__
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/pvt.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
-->
# Pyramid Vision Transformer (PVT)
## Overview
The PVT model was proposed in
[Pyramid Vision Transformer: A Versatile Backbone for Dense Prediction without Convolutions](https://arxiv.org/abs/2102.12122)
by Wenhai Wang, Enze Xie, Xiang Li, Deng-Ping Fan, Kaitao Song, Ding Liang, Tong Lu, Ping Luo, Ling Shao. The PVT is a type of
vision transformer that utilizes a pyramid structure to make it an effective backbone for dense prediction tasks. Specifically
it allows for more fine-grained inputs (4 x 4 pixels per patch) to be used, while simultaneously shrinking the sequence length
of the Transformer as it deepens - reducing the computational cost. Additionally, a spatial-reduction attention (SRA) layer
is used to further reduce the resource consumption when learning high-resolution features.
The abstract from the paper is the following:
*Although convolutional neural networks (CNNs) have achieved great success in computer vision, this work investigates a
simpler, convolution-free backbone network useful for many dense prediction tasks. Unlike the recently proposed Vision
Transformer (ViT) that was designed for image classification specifically, we introduce the Pyramid Vision Transformer
(PVT), which overcomes the difficulties of porting Transformer to various dense prediction tasks. PVT has several
merits compared to current state of the arts. Different from ViT that typically yields low resolution outputs and
incurs high computational and memory costs, PVT not only can be trained on dense partitions of an image to achieve high
output resolution, which is important for dense prediction, but also uses a progressive shrinking pyramid to reduce the
computations of large feature maps. PVT inherits the advantages of both CNN and Transformer, making it a unified
backbone for various vision tasks without convolutions, where it can be used as a direct replacement for CNN backbones.
We validate PVT through extensive experiments, showing that it boosts the performance of many downstream tasks, including
object detection, instance and semantic segmentation. For example, with a comparable number of parameters, PVT+RetinaNet
achieves 40.4 AP on the COCO dataset, surpassing ResNet50+RetinNet (36.3 AP) by 4.1 absolute AP (see Figure 2). We hope
that PVT could serve as an alternative and useful backbone for pixel-level predictions and facilitate future research.*
This model was contributed by [Xrenya](<https://huggingface.co/Xrenya). The original code can be found [here](https://github.com/whai362/PVT).
- PVTv1 on ImageNet-1K
| **Model variant** |**Size** |**Acc@1**|**Params (M)**|
|--------------------|:-------:|:-------:|:------------:|
| PVT-Tiny | 224 | 75.1 | 13.2 |
| PVT-Small | 224 | 79.8 | 24.5 |
| PVT-Medium | 224 | 81.2 | 44.2 |
| PVT-Large | 224 | 81.7 | 61.4 |
## PvtConfig
[[autodoc]] PvtConfig
## PvtImageProcessor
[[autodoc]] PvtImageProcessor
- preprocess
## PvtForImageClassification
[[autodoc]] PvtForImageClassification
- forward
## PvtModel
[[autodoc]] PvtModel
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/xlm-prophetnet.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# XLM-ProphetNet
<div class="flex flex-wrap space-x-1">
<a href="https://huggingface.co/models?filter=xprophetnet">
<img alt="Models" src="https://img.shields.io/badge/All_model_pages-xprophetnet-blueviolet">
</a>
<a href="https://huggingface.co/spaces/docs-demos/xprophetnet-large-wiki100-cased-xglue-ntg">
<img alt="Spaces" src="https://img.shields.io/badge/%F0%9F%A4%97%20Hugging%20Face-Spaces-blue">
</a>
</div>
**DISCLAIMER:** If you see something strange, file a [Github Issue](https://github.com/huggingface/transformers/issues/new?assignees=&labels=&template=bug-report.md&title) and assign
@patrickvonplaten
## Overview
The XLM-ProphetNet model was proposed in [ProphetNet: Predicting Future N-gram for Sequence-to-Sequence Pre-training,](https://arxiv.org/abs/2001.04063) by Yu Yan, Weizhen Qi, Yeyun Gong, Dayiheng Liu, Nan Duan, Jiusheng Chen, Ruofei
Zhang, Ming Zhou on 13 Jan, 2020.
XLM-ProphetNet is an encoder-decoder model and can predict n-future tokens for "ngram" language modeling instead of
just the next token. Its architecture is identical to ProhpetNet, but the model was trained on the multi-lingual
"wiki100" Wikipedia dump. XLM-ProphetNet's model architecture and pretraining objective is same as ProphetNet, but XLM-ProphetNet was pre-trained on the cross-lingual dataset XGLUE.
The abstract from the paper is the following:
*In this paper, we present a new sequence-to-sequence pretraining model called ProphetNet, which introduces a novel
self-supervised objective named future n-gram prediction and the proposed n-stream self-attention mechanism. Instead of
the optimization of one-step ahead prediction in traditional sequence-to-sequence model, the ProphetNet is optimized by
n-step ahead prediction which predicts the next n tokens simultaneously based on previous context tokens at each time
step. The future n-gram prediction explicitly encourages the model to plan for the future tokens and prevent
overfitting on strong local correlations. We pre-train ProphetNet using a base scale dataset (16GB) and a large scale
dataset (160GB) respectively. Then we conduct experiments on CNN/DailyMail, Gigaword, and SQuAD 1.1 benchmarks for
abstractive summarization and question generation tasks. Experimental results show that ProphetNet achieves new
state-of-the-art results on all these datasets compared to the models using the same scale pretraining corpus.*
The Authors' code can be found [here](https://github.com/microsoft/ProphetNet).
## Resources
- [Causal language modeling task guide](../tasks/language_modeling)
- [Translation task guide](../tasks/translation)
- [Summarization task guide](../tasks/summarization)
## XLMProphetNetConfig
[[autodoc]] XLMProphetNetConfig
## XLMProphetNetTokenizer
[[autodoc]] XLMProphetNetTokenizer
## XLMProphetNetModel
[[autodoc]] XLMProphetNetModel
## XLMProphetNetEncoder
[[autodoc]] XLMProphetNetEncoder
## XLMProphetNetDecoder
[[autodoc]] XLMProphetNetDecoder
## XLMProphetNetForConditionalGeneration
[[autodoc]] XLMProphetNetForConditionalGeneration
## XLMProphetNetForCausalLM
[[autodoc]] XLMProphetNetForCausalLM
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/realm.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# REALM
## Overview
The REALM model was proposed in [REALM: Retrieval-Augmented Language Model Pre-Training](https://arxiv.org/abs/2002.08909) by Kelvin Guu, Kenton Lee, Zora Tung, Panupong Pasupat and Ming-Wei Chang. It's a
retrieval-augmented language model that firstly retrieves documents from a textual knowledge corpus and then
utilizes retrieved documents to process question answering tasks.
The abstract from the paper is the following:
*Language model pre-training has been shown to capture a surprising amount of world knowledge, crucial for NLP tasks
such as question answering. However, this knowledge is stored implicitly in the parameters of a neural network,
requiring ever-larger networks to cover more facts. To capture knowledge in a more modular and interpretable way, we
augment language model pre-training with a latent knowledge retriever, which allows the model to retrieve and attend
over documents from a large corpus such as Wikipedia, used during pre-training, fine-tuning and inference. For the
first time, we show how to pre-train such a knowledge retriever in an unsupervised manner, using masked language
modeling as the learning signal and backpropagating through a retrieval step that considers millions of documents. We
demonstrate the effectiveness of Retrieval-Augmented Language Model pre-training (REALM) by fine-tuning on the
challenging task of Open-domain Question Answering (Open-QA). We compare against state-of-the-art models for both
explicit and implicit knowledge storage on three popular Open-QA benchmarks, and find that we outperform all previous
methods by a significant margin (4-16% absolute accuracy), while also providing qualitative benefits such as
interpretability and modularity.*
This model was contributed by [qqaatw](https://huggingface.co/qqaatw). The original code can be found
[here](https://github.com/google-research/language/tree/master/language/realm).
## RealmConfig
[[autodoc]] RealmConfig
## RealmTokenizer
[[autodoc]] RealmTokenizer
- build_inputs_with_special_tokens
- get_special_tokens_mask
- create_token_type_ids_from_sequences
- save_vocabulary
- batch_encode_candidates
## RealmTokenizerFast
[[autodoc]] RealmTokenizerFast
- batch_encode_candidates
## RealmRetriever
[[autodoc]] RealmRetriever
## RealmEmbedder
[[autodoc]] RealmEmbedder
- forward
## RealmScorer
[[autodoc]] RealmScorer
- forward
## RealmKnowledgeAugEncoder
[[autodoc]] RealmKnowledgeAugEncoder
- forward
## RealmReader
[[autodoc]] RealmReader
- forward
## RealmForOpenQA
[[autodoc]] RealmForOpenQA
- block_embedding_to
- forward | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/visual_bert.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# VisualBERT
## Overview
The VisualBERT model was proposed in [VisualBERT: A Simple and Performant Baseline for Vision and Language](https://arxiv.org/pdf/1908.03557) by Liunian Harold Li, Mark Yatskar, Da Yin, Cho-Jui Hsieh, Kai-Wei Chang.
VisualBERT is a neural network trained on a variety of (image, text) pairs.
The abstract from the paper is the following:
*We propose VisualBERT, a simple and flexible framework for modeling a broad range of vision-and-language tasks.
VisualBERT consists of a stack of Transformer layers that implicitly align elements of an input text and regions in an
associated input image with self-attention. We further propose two visually-grounded language model objectives for
pre-training VisualBERT on image caption data. Experiments on four vision-and-language tasks including VQA, VCR, NLVR2,
and Flickr30K show that VisualBERT outperforms or rivals with state-of-the-art models while being significantly
simpler. Further analysis demonstrates that VisualBERT can ground elements of language to image regions without any
explicit supervision and is even sensitive to syntactic relationships, tracking, for example, associations between
verbs and image regions corresponding to their arguments.*
This model was contributed by [gchhablani](https://huggingface.co/gchhablani). The original code can be found [here](https://github.com/uclanlp/visualbert).
## Usage tips
1. Most of the checkpoints provided work with the [`VisualBertForPreTraining`] configuration. Other
checkpoints provided are the fine-tuned checkpoints for down-stream tasks - VQA ('visualbert-vqa'), VCR
('visualbert-vcr'), NLVR2 ('visualbert-nlvr2'). Hence, if you are not working on these downstream tasks, it is
recommended that you use the pretrained checkpoints.
2. For the VCR task, the authors use a fine-tuned detector for generating visual embeddings, for all the checkpoints.
We do not provide the detector and its weights as a part of the package, but it will be available in the research
projects, and the states can be loaded directly into the detector provided.
VisualBERT is a multi-modal vision and language model. It can be used for visual question answering, multiple choice,
visual reasoning and region-to-phrase correspondence tasks. VisualBERT uses a BERT-like transformer to prepare
embeddings for image-text pairs. Both the text and visual features are then projected to a latent space with identical
dimension.
To feed images to the model, each image is passed through a pre-trained object detector and the regions and the
bounding boxes are extracted. The authors use the features generated after passing these regions through a pre-trained
CNN like ResNet as visual embeddings. They also add absolute position embeddings, and feed the resulting sequence of
vectors to a standard BERT model. The text input is concatenated in the front of the visual embeddings in the embedding
layer, and is expected to be bound by [CLS] and a [SEP] tokens, as in BERT. The segment IDs must also be set
appropriately for the textual and visual parts.
The [`BertTokenizer`] is used to encode the text. A custom detector/image processor must be used
to get the visual embeddings. The following example notebooks show how to use VisualBERT with Detectron-like models:
- [VisualBERT VQA demo notebook](https://github.com/huggingface/transformers/tree/main/examples/research_projects/visual_bert) : This notebook
contains an example on VisualBERT VQA.
- [Generate Embeddings for VisualBERT (Colab Notebook)](https://colab.research.google.com/drive/1bLGxKdldwqnMVA5x4neY7-l_8fKGWQYI?usp=sharing) : This notebook contains
an example on how to generate visual embeddings.
The following example shows how to get the last hidden state using [`VisualBertModel`]:
```python
>>> import torch
>>> from transformers import BertTokenizer, VisualBertModel
>>> model = VisualBertModel.from_pretrained("uclanlp/visualbert-vqa-coco-pre")
>>> tokenizer = BertTokenizer.from_pretrained("bert-base-uncased")
>>> inputs = tokenizer("What is the man eating?", return_tensors="pt")
>>> # this is a custom function that returns the visual embeddings given the image path
>>> visual_embeds = get_visual_embeddings(image_path)
>>> visual_token_type_ids = torch.ones(visual_embeds.shape[:-1], dtype=torch.long)
>>> visual_attention_mask = torch.ones(visual_embeds.shape[:-1], dtype=torch.float)
>>> inputs.update(
... {
... "visual_embeds": visual_embeds,
... "visual_token_type_ids": visual_token_type_ids,
... "visual_attention_mask": visual_attention_mask,
... }
... )
>>> outputs = model(**inputs)
>>> last_hidden_state = outputs.last_hidden_state
```
## VisualBertConfig
[[autodoc]] VisualBertConfig
## VisualBertModel
[[autodoc]] VisualBertModel
- forward
## VisualBertForPreTraining
[[autodoc]] VisualBertForPreTraining
- forward
## VisualBertForQuestionAnswering
[[autodoc]] VisualBertForQuestionAnswering
- forward
## VisualBertForMultipleChoice
[[autodoc]] VisualBertForMultipleChoice
- forward
## VisualBertForVisualReasoning
[[autodoc]] VisualBertForVisualReasoning
- forward
## VisualBertForRegionToPhraseAlignment
[[autodoc]] VisualBertForRegionToPhraseAlignment
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/vit.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Vision Transformer (ViT)
## Overview
The Vision Transformer (ViT) model was proposed in [An Image is Worth 16x16 Words: Transformers for Image Recognition
at Scale](https://arxiv.org/abs/2010.11929) by Alexey Dosovitskiy, Lucas Beyer, Alexander Kolesnikov, Dirk
Weissenborn, Xiaohua Zhai, Thomas Unterthiner, Mostafa Dehghani, Matthias Minderer, Georg Heigold, Sylvain Gelly, Jakob
Uszkoreit, Neil Houlsby. It's the first paper that successfully trains a Transformer encoder on ImageNet, attaining
very good results compared to familiar convolutional architectures.
The abstract from the paper is the following:
*While the Transformer architecture has become the de-facto standard for natural language processing tasks, its
applications to computer vision remain limited. In vision, attention is either applied in conjunction with
convolutional networks, or used to replace certain components of convolutional networks while keeping their overall
structure in place. We show that this reliance on CNNs is not necessary and a pure transformer applied directly to
sequences of image patches can perform very well on image classification tasks. When pre-trained on large amounts of
data and transferred to multiple mid-sized or small image recognition benchmarks (ImageNet, CIFAR-100, VTAB, etc.),
Vision Transformer (ViT) attains excellent results compared to state-of-the-art convolutional networks while requiring
substantially fewer computational resources to train.*
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/model_doc/vit_architecture.jpg"
alt="drawing" width="600"/>
<small> ViT architecture. Taken from the <a href="https://arxiv.org/abs/2010.11929">original paper.</a> </small>
Following the original Vision Transformer, some follow-up works have been made:
- [DeiT](deit) (Data-efficient Image Transformers) by Facebook AI. DeiT models are distilled vision transformers.
The authors of DeiT also released more efficiently trained ViT models, which you can directly plug into [`ViTModel`] or
[`ViTForImageClassification`]. There are 4 variants available (in 3 different sizes): *facebook/deit-tiny-patch16-224*,
*facebook/deit-small-patch16-224*, *facebook/deit-base-patch16-224* and *facebook/deit-base-patch16-384*. Note that one should
use [`DeiTImageProcessor`] in order to prepare images for the model.
- [BEiT](beit) (BERT pre-training of Image Transformers) by Microsoft Research. BEiT models outperform supervised pre-trained
vision transformers using a self-supervised method inspired by BERT (masked image modeling) and based on a VQ-VAE.
- DINO (a method for self-supervised training of Vision Transformers) by Facebook AI. Vision Transformers trained using
the DINO method show very interesting properties not seen with convolutional models. They are capable of segmenting
objects, without having ever been trained to do so. DINO checkpoints can be found on the [hub](https://huggingface.co/models?other=dino).
- [MAE](vit_mae) (Masked Autoencoders) by Facebook AI. By pre-training Vision Transformers to reconstruct pixel values for a high portion
(75%) of masked patches (using an asymmetric encoder-decoder architecture), the authors show that this simple method outperforms
supervised pre-training after fine-tuning.
This model was contributed by [nielsr](https://huggingface.co/nielsr). The original code (written in JAX) can be
found [here](https://github.com/google-research/vision_transformer).
Note that we converted the weights from Ross Wightman's [timm library](https://github.com/rwightman/pytorch-image-models),
who already converted the weights from JAX to PyTorch. Credits go to him!
## Usage tips
- To feed images to the Transformer encoder, each image is split into a sequence of fixed-size non-overlapping patches,
which are then linearly embedded. A [CLS] token is added to serve as representation of an entire image, which can be
used for classification. The authors also add absolute position embeddings, and feed the resulting sequence of
vectors to a standard Transformer encoder.
- As the Vision Transformer expects each image to be of the same size (resolution), one can use
[`ViTImageProcessor`] to resize (or rescale) and normalize images for the model.
- Both the patch resolution and image resolution used during pre-training or fine-tuning are reflected in the name of
each checkpoint. For example, `google/vit-base-patch16-224` refers to a base-sized architecture with patch
resolution of 16x16 and fine-tuning resolution of 224x224. All checkpoints can be found on the [hub](https://huggingface.co/models?search=vit).
- The available checkpoints are either (1) pre-trained on [ImageNet-21k](http://www.image-net.org/) (a collection of
14 million images and 21k classes) only, or (2) also fine-tuned on [ImageNet](http://www.image-net.org/challenges/LSVRC/2012/) (also referred to as ILSVRC 2012, a collection of 1.3 million
images and 1,000 classes).
- The Vision Transformer was pre-trained using a resolution of 224x224. During fine-tuning, it is often beneficial to
use a higher resolution than pre-training [(Touvron et al., 2019)](https://arxiv.org/abs/1906.06423), [(Kolesnikov
et al., 2020)](https://arxiv.org/abs/1912.11370). In order to fine-tune at higher resolution, the authors perform
2D interpolation of the pre-trained position embeddings, according to their location in the original image.
- The best results are obtained with supervised pre-training, which is not the case in NLP. The authors also performed
an experiment with a self-supervised pre-training objective, namely masked patched prediction (inspired by masked
language modeling). With this approach, the smaller ViT-B/16 model achieves 79.9% accuracy on ImageNet, a significant
improvement of 2% to training from scratch, but still 4% behind supervised pre-training.
## Resources
Demo notebooks regarding inference as well as fine-tuning ViT on custom data can be found [here](https://github.com/NielsRogge/Transformers-Tutorials/tree/master/VisionTransformer).
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with ViT. If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
`ViTForImageClassification` is supported by:
<PipelineTag pipeline="image-classification"/>
- A blog post on how to [Fine-Tune ViT for Image Classification with Hugging Face Transformers](https://huggingface.co/blog/fine-tune-vit)
- A blog post on [Image Classification with Hugging Face Transformers and `Keras`](https://www.philschmid.de/image-classification-huggingface-transformers-keras)
- A notebook on [Fine-tuning for Image Classification with Hugging Face Transformers](https://github.com/huggingface/notebooks/blob/main/examples/image_classification.ipynb)
- A notebook on how to [Fine-tune the Vision Transformer on CIFAR-10 with the Hugging Face Trainer](https://github.com/NielsRogge/Transformers-Tutorials/blob/master/VisionTransformer/Fine_tuning_the_Vision_Transformer_on_CIFAR_10_with_the_%F0%9F%A4%97_Trainer.ipynb)
- A notebook on how to [Fine-tune the Vision Transformer on CIFAR-10 with PyTorch Lightning](https://github.com/NielsRogge/Transformers-Tutorials/blob/master/VisionTransformer/Fine_tuning_the_Vision_Transformer_on_CIFAR_10_with_PyTorch_Lightning.ipynb)
⚗️ Optimization
- A blog post on how to [Accelerate Vision Transformer (ViT) with Quantization using Optimum](https://www.philschmid.de/optimizing-vision-transformer)
⚡️ Inference
- A notebook on [Quick demo: Vision Transformer (ViT) by Google Brain](https://github.com/NielsRogge/Transformers-Tutorials/blob/master/VisionTransformer/Quick_demo_of_HuggingFace_version_of_Vision_Transformer_inference.ipynb)
🚀 Deploy
- A blog post on [Deploying Tensorflow Vision Models in Hugging Face with TF Serving](https://huggingface.co/blog/tf-serving-vision)
- A blog post on [Deploying Hugging Face ViT on Vertex AI](https://huggingface.co/blog/deploy-vertex-ai)
- A blog post on [Deploying Hugging Face ViT on Kubernetes with TF Serving](https://huggingface.co/blog/deploy-tfserving-kubernetes)
## ViTConfig
[[autodoc]] ViTConfig
## ViTFeatureExtractor
[[autodoc]] ViTFeatureExtractor
- __call__
## ViTImageProcessor
[[autodoc]] ViTImageProcessor
- preprocess
<frameworkcontent>
<pt>
## ViTModel
[[autodoc]] ViTModel
- forward
## ViTForMaskedImageModeling
[[autodoc]] ViTForMaskedImageModeling
- forward
## ViTForImageClassification
[[autodoc]] ViTForImageClassification
- forward
</pt>
<tf>
## TFViTModel
[[autodoc]] TFViTModel
- call
## TFViTForImageClassification
[[autodoc]] TFViTForImageClassification
- call
</tf>
<jax>
## FlaxVitModel
[[autodoc]] FlaxViTModel
- __call__
## FlaxViTForImageClassification
[[autodoc]] FlaxViTForImageClassification
- __call__
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/vipllava.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# VipLlava
## Overview
The VipLlava model was proposed in [Making Large Multimodal Models Understand Arbitrary Visual Prompts](https://arxiv.org/abs/2312.00784) by Mu Cai, Haotian Liu, Siva Karthik Mustikovela, Gregory P. Meyer, Yuning Chai, Dennis Park, Yong Jae Lee.
VipLlava enhances the training protocol of Llava by marking images and interact with the model using natural cues like a "red bounding box" or "pointed arrow" during training.
The abstract from the paper is the following:
*While existing large vision-language multimodal models focus on whole image understanding, there is a prominent gap in achieving region-specific comprehension. Current approaches that use textual coordinates or spatial encodings often fail to provide a user-friendly interface for visual prompting. To address this challenge, we introduce a novel multimodal model capable of decoding arbitrary visual prompts. This allows users to intuitively mark images and interact with the model using natural cues like a "red bounding box" or "pointed arrow". Our simple design directly overlays visual markers onto the RGB image, eliminating the need for complex region encodings, yet achieves state-of-the-art performance on region-understanding tasks like Visual7W, PointQA, and Visual Commonsense Reasoning benchmark. Furthermore, we present ViP-Bench, a comprehensive benchmark to assess the capability of models in understanding visual prompts across multiple dimensions, enabling future research in this domain. Code, data, and model are publicly available.*
Tips:
- The architecture is similar than llava architecture except that the multi-modal projector takes a set of concatenated vision hidden states and has an additional layernorm layer on that module.
- We advise users to use `padding_side="left"` when computing batched generation as it leads to more accurate results. Simply make sure to call `processor.tokenizer.padding_side = "left"` before generating.
- Note the model has not been explicitly trained to process multiple images in the same prompt, although this is technically possible, you may experience inaccurate results.
- For better results, we recommend users to prompt the model with the correct prompt format:
```bash
A chat between a curious human and an artificial intelligence assistant. The assistant gives helpful, detailed, and polite answers to the human's questions.###Human: <image>\n<prompt>###Assistant:
```
For multiple turns conversation:
```bash
A chat between a curious human and an artificial intelligence assistant. The assistant gives helpful, detailed, and polite answers to the human's questions.###Human: <image>\n<prompt1>###Assistant: <answer1>###Human: <prompt2>###Assistant:
```
The original code can be found [here](https://github.com/mu-cai/ViP-LLaVA).
This model was contributed by [Younes Belkada](https://huggingface.co/ybelkada)
## VipLlavaConfig
[[autodoc]] VipLlavaConfig
## VipLlavaForConditionalGeneration
[[autodoc]] VipLlavaForConditionalGeneration
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/sam.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# SAM
## Overview
SAM (Segment Anything Model) was proposed in [Segment Anything](https://arxiv.org/pdf/2304.02643v1.pdf) by Alexander Kirillov, Eric Mintun, Nikhila Ravi, Hanzi Mao, Chloe Rolland, Laura Gustafson, Tete Xiao, Spencer Whitehead, Alex Berg, Wan-Yen Lo, Piotr Dollar, Ross Girshick.
The model can be used to predict segmentation masks of any object of interest given an input image.
The abstract from the paper is the following:
*We introduce the Segment Anything (SA) project: a new task, model, and dataset for image segmentation. Using our efficient model in a data collection loop, we built the largest segmentation dataset to date (by far), with over 1 billion masks on 11M licensed and privacy respecting images. The model is designed and trained to be promptable, so it can transfer zero-shot to new image distributions and tasks. We evaluate its capabilities on numerous tasks and find that its zero-shot performance is impressive -- often competitive with or even superior to prior fully supervised results. We are releasing the Segment Anything Model (SAM) and corresponding dataset (SA-1B) of 1B masks and 11M images at [https://segment-anything.com](https://segment-anything.com) to foster research into foundation models for computer vision.*
Tips:
- The model predicts binary masks that states the presence or not of the object of interest given an image.
- The model predicts much better results if input 2D points and/or input bounding boxes are provided
- You can prompt multiple points for the same image, and predict a single mask.
- Fine-tuning the model is not supported yet
- According to the paper, textual input should be also supported. However, at this time of writing this seems to be not supported according to [the official repository](https://github.com/facebookresearch/segment-anything/issues/4#issuecomment-1497626844).
This model was contributed by [ybelkada](https://huggingface.co/ybelkada) and [ArthurZ](https://huggingface.co/ArthurZ).
The original code can be found [here](https://github.com/facebookresearch/segment-anything).
Below is an example on how to run mask generation given an image and a 2D point:
```python
import torch
from PIL import Image
import requests
from transformers import SamModel, SamProcessor
device = "cuda" if torch.cuda.is_available() else "cpu"
model = SamModel.from_pretrained("facebook/sam-vit-huge").to(device)
processor = SamProcessor.from_pretrained("facebook/sam-vit-huge")
img_url = "https://huggingface.co/ybelkada/segment-anything/resolve/main/assets/car.png"
raw_image = Image.open(requests.get(img_url, stream=True).raw).convert("RGB")
input_points = [[[450, 600]]] # 2D location of a window in the image
inputs = processor(raw_image, input_points=input_points, return_tensors="pt").to(device)
with torch.no_grad():
outputs = model(**inputs)
masks = processor.image_processor.post_process_masks(
outputs.pred_masks.cpu(), inputs["original_sizes"].cpu(), inputs["reshaped_input_sizes"].cpu()
)
scores = outputs.iou_scores
```
You can also process your own masks alongside the input images in the processor to be passed to the model.
```python
import torch
from PIL import Image
import requests
from transformers import SamModel, SamProcessor
device = "cuda" if torch.cuda.is_available() else "cpu"
model = SamModel.from_pretrained("facebook/sam-vit-huge").to(device)
processor = SamProcessor.from_pretrained("facebook/sam-vit-huge")
img_url = "https://huggingface.co/ybelkada/segment-anything/resolve/main/assets/car.png"
raw_image = Image.open(requests.get(img_url, stream=True).raw).convert("RGB")
mask_url = "https://huggingface.co/ybelkada/segment-anything/resolve/main/assets/car.png"
segmentation_map = Image.open(requests.get(mask_url, stream=True).raw).convert("RGB")
input_points = [[[450, 600]]] # 2D location of a window in the image
inputs = processor(raw_image, input_points=input_points, segmentation_maps=mask, return_tensors="pt").to(device)
with torch.no_grad():
outputs = model(**inputs)
masks = processor.image_processor.post_process_masks(
outputs.pred_masks.cpu(), inputs["original_sizes"].cpu(), inputs["reshaped_input_sizes"].cpu()
)
scores = outputs.iou_scores
```
Resources:
- [Demo notebook](https://github.com/huggingface/notebooks/blob/main/examples/segment_anything.ipynb) for using the model.
- [Demo notebook](https://github.com/huggingface/notebooks/blob/main/examples/automatic_mask_generation.ipynb) for using the automatic mask generation pipeline.
- [Demo notebook](https://github.com/NielsRogge/Transformers-Tutorials/blob/master/SAM/Run_inference_with_MedSAM_using_HuggingFace_Transformers.ipynb) for inference with MedSAM, a fine-tuned version of SAM on the medical domain.
- [Demo notebook](https://github.com/NielsRogge/Transformers-Tutorials/blob/master/SAM/Fine_tune_SAM_(segment_anything)_on_a_custom_dataset.ipynb) for fine-tuning the model on custom data.
## SamConfig
[[autodoc]] SamConfig
## SamVisionConfig
[[autodoc]] SamVisionConfig
## SamMaskDecoderConfig
[[autodoc]] SamMaskDecoderConfig
## SamPromptEncoderConfig
[[autodoc]] SamPromptEncoderConfig
## SamProcessor
[[autodoc]] SamProcessor
## SamImageProcessor
[[autodoc]] SamImageProcessor
## SamModel
[[autodoc]] SamModel
- forward
## TFSamModel
[[autodoc]] TFSamModel
- call
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/ctrl.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# CTRL
<div class="flex flex-wrap space-x-1">
<a href="https://huggingface.co/models?filter=ctrl">
<img alt="Models" src="https://img.shields.io/badge/All_model_pages-ctrl-blueviolet">
</a>
<a href="https://huggingface.co/spaces/docs-demos/tiny-ctrl">
<img alt="Spaces" src="https://img.shields.io/badge/%F0%9F%A4%97%20Hugging%20Face-Spaces-blue">
</a>
</div>
## Overview
CTRL model was proposed in [CTRL: A Conditional Transformer Language Model for Controllable Generation](https://arxiv.org/abs/1909.05858) by Nitish Shirish Keskar*, Bryan McCann*, Lav R. Varshney, Caiming Xiong and
Richard Socher. It's a causal (unidirectional) transformer pre-trained using language modeling on a very large corpus
of ~140 GB of text data with the first token reserved as a control code (such as Links, Books, Wikipedia etc.).
The abstract from the paper is the following:
*Large-scale language models show promising text generation capabilities, but users cannot easily control particular
aspects of the generated text. We release CTRL, a 1.63 billion-parameter conditional transformer language model,
trained to condition on control codes that govern style, content, and task-specific behavior. Control codes were
derived from structure that naturally co-occurs with raw text, preserving the advantages of unsupervised learning while
providing more explicit control over text generation. These codes also allow CTRL to predict which parts of the
training data are most likely given a sequence. This provides a potential method for analyzing large amounts of data
via model-based source attribution.*
This model was contributed by [keskarnitishr](https://huggingface.co/keskarnitishr). The original code can be found
[here](https://github.com/salesforce/ctrl).
## Usage tips
- CTRL makes use of control codes to generate text: it requires generations to be started by certain words, sentences
or links to generate coherent text. Refer to the [original implementation](https://github.com/salesforce/ctrl) for
more information.
- CTRL is a model with absolute position embeddings so it's usually advised to pad the inputs on the right rather than
the left.
- CTRL was trained with a causal language modeling (CLM) objective and is therefore powerful at predicting the next
token in a sequence. Leveraging this feature allows CTRL to generate syntactically coherent text as it can be
observed in the *run_generation.py* example script.
- The PyTorch models can take the `past_key_values` as input, which is the previously computed key/value attention pairs.
TensorFlow models accepts `past` as input. Using the `past_key_values` value prevents the model from re-computing
pre-computed values in the context of text generation. See the [`forward`](model_doc/ctrl#transformers.CTRLModel.forward)
method for more information on the usage of this argument.
## Resources
- [Text classification task guide](../tasks/sequence_classification)
- [Causal language modeling task guide](../tasks/language_modeling)
## CTRLConfig
[[autodoc]] CTRLConfig
## CTRLTokenizer
[[autodoc]] CTRLTokenizer
- save_vocabulary
<frameworkcontent>
<pt>
## CTRLModel
[[autodoc]] CTRLModel
- forward
## CTRLLMHeadModel
[[autodoc]] CTRLLMHeadModel
- forward
## CTRLForSequenceClassification
[[autodoc]] CTRLForSequenceClassification
- forward
</pt>
<tf>
## TFCTRLModel
[[autodoc]] TFCTRLModel
- call
## TFCTRLLMHeadModel
[[autodoc]] TFCTRLLMHeadModel
- call
## TFCTRLForSequenceClassification
[[autodoc]] TFCTRLForSequenceClassification
- call
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/resnet.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# ResNet
## Overview
The ResNet model was proposed in [Deep Residual Learning for Image Recognition](https://arxiv.org/abs/1512.03385) by Kaiming He, Xiangyu Zhang, Shaoqing Ren and Jian Sun. Our implementation follows the small changes made by [Nvidia](https://catalog.ngc.nvidia.com/orgs/nvidia/resources/resnet_50_v1_5_for_pytorch), we apply the `stride=2` for downsampling in bottleneck's `3x3` conv and not in the first `1x1`. This is generally known as "ResNet v1.5".
ResNet introduced residual connections, they allow to train networks with an unseen number of layers (up to 1000). ResNet won the 2015 ILSVRC & COCO competition, one important milestone in deep computer vision.
The abstract from the paper is the following:
*Deeper neural networks are more difficult to train. We present a residual learning framework to ease the training of networks that are substantially deeper than those used previously. We explicitly reformulate the layers as learning residual functions with reference to the layer inputs, instead of learning unreferenced functions. We provide comprehensive empirical evidence showing that these residual networks are easier to optimize, and can gain accuracy from considerably increased depth. On the ImageNet dataset we evaluate residual nets with a depth of up to 152 layers---8x deeper than VGG nets but still having lower complexity. An ensemble of these residual nets achieves 3.57% error on the ImageNet test set. This result won the 1st place on the ILSVRC 2015 classification task. We also present analysis on CIFAR-10 with 100 and 1000 layers.
The depth of representations is of central importance for many visual recognition tasks. Solely due to our extremely deep representations, we obtain a 28% relative improvement on the COCO object detection dataset. Deep residual nets are foundations of our submissions to ILSVRC & COCO 2015 competitions, where we also won the 1st places on the tasks of ImageNet detection, ImageNet localization, COCO detection, and COCO segmentation.*
The figure below illustrates the architecture of ResNet. Taken from the [original paper](https://arxiv.org/abs/1512.03385).
<img width="600" src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/resnet_architecture.png"/>
This model was contributed by [Francesco](https://huggingface.co/Francesco). The TensorFlow version of this model was added by [amyeroberts](https://huggingface.co/amyeroberts). The original code can be found [here](https://github.com/KaimingHe/deep-residual-networks).
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with ResNet.
<PipelineTag pipeline="image-classification"/>
- [`ResNetForImageClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/image-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/image_classification.ipynb).
- See also: [Image classification task guide](../tasks/image_classification)
If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
## ResNetConfig
[[autodoc]] ResNetConfig
<frameworkcontent>
<pt>
## ResNetModel
[[autodoc]] ResNetModel
- forward
## ResNetForImageClassification
[[autodoc]] ResNetForImageClassification
- forward
</pt>
<tf>
## TFResNetModel
[[autodoc]] TFResNetModel
- call
## TFResNetForImageClassification
[[autodoc]] TFResNetForImageClassification
- call
</tf>
<jax>
## FlaxResNetModel
[[autodoc]] FlaxResNetModel
- __call__
## FlaxResNetForImageClassification
[[autodoc]] FlaxResNetForImageClassification
- __call__
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/graphormer.md | <!--Copyright 2022 The HuggingFace Team and Microsoft. All rights reserved.
Licensed under the MIT License; you may not use this file except in compliance with
the License.
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Graphormer
## Overview
The Graphormer model was proposed in [Do Transformers Really Perform Bad for Graph Representation?](https://arxiv.org/abs/2106.05234) by
Chengxuan Ying, Tianle Cai, Shengjie Luo, Shuxin Zheng, Guolin Ke, Di He, Yanming Shen and Tie-Yan Liu. It is a Graph Transformer model, modified to allow computations on graphs instead of text sequences by generating embeddings and features of interest during preprocessing and collation, then using a modified attention.
The abstract from the paper is the following:
*The Transformer architecture has become a dominant choice in many domains, such as natural language processing and computer vision. Yet, it has not achieved competitive performance on popular leaderboards of graph-level prediction compared to mainstream GNN variants. Therefore, it remains a mystery how Transformers could perform well for graph representation learning. In this paper, we solve this mystery by presenting Graphormer, which is built upon the standard Transformer architecture, and could attain excellent results on a broad range of graph representation learning tasks, especially on the recent OGB Large-Scale Challenge. Our key insight to utilizing Transformer in the graph is the necessity of effectively encoding the structural information of a graph into the model. To this end, we propose several simple yet effective structural encoding methods to help Graphormer better model graph-structured data. Besides, we mathematically characterize the expressive power of Graphormer and exhibit that with our ways of encoding the structural information of graphs, many popular GNN variants could be covered as the special cases of Graphormer.*
This model was contributed by [clefourrier](https://huggingface.co/clefourrier). The original code can be found [here](https://github.com/microsoft/Graphormer).
## Usage tips
This model will not work well on large graphs (more than 100 nodes/edges), as it will make the memory explode.
You can reduce the batch size, increase your RAM, or decrease the `UNREACHABLE_NODE_DISTANCE` parameter in algos_graphormer.pyx, but it will be hard to go above 700 nodes/edges.
This model does not use a tokenizer, but instead a special collator during training.
## GraphormerConfig
[[autodoc]] GraphormerConfig
## GraphormerModel
[[autodoc]] GraphormerModel
- forward
## GraphormerForGraphClassification
[[autodoc]] GraphormerForGraphClassification
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/blip-2.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# BLIP-2
## Overview
The BLIP-2 model was proposed in [BLIP-2: Bootstrapping Language-Image Pre-training with Frozen Image Encoders and Large Language Models](https://arxiv.org/abs/2301.12597) by
Junnan Li, Dongxu Li, Silvio Savarese, Steven Hoi. BLIP-2 leverages frozen pre-trained image encoders and large language models (LLMs) by training a lightweight, 12-layer Transformer
encoder in between them, achieving state-of-the-art performance on various vision-language tasks. Most notably, BLIP-2 improves upon [Flamingo](https://arxiv.org/abs/2204.14198), an 80 billion parameter model, by 8.7%
on zero-shot VQAv2 with 54x fewer trainable parameters.
The abstract from the paper is the following:
*The cost of vision-and-language pre-training has become increasingly prohibitive due to end-to-end training of large-scale models. This paper proposes BLIP-2, a generic and efficient pre-training strategy that bootstraps vision-language pre-training from off-the-shelf frozen pre-trained image encoders and frozen large language models. BLIP-2 bridges the modality gap with a lightweight Querying Transformer, which is pre-trained in two stages. The first stage bootstraps vision-language representation learning from a frozen image encoder. The second stage bootstraps vision-to-language generative learning from a frozen language model. BLIP-2 achieves state-of-the-art performance on various vision-language tasks, despite having significantly fewer trainable parameters than existing methods. For example, our model outperforms Flamingo80B by 8.7% on zero-shot VQAv2 with 54x fewer trainable parameters. We also demonstrate the model's emerging capabilities of zero-shot image-to-text generation that can follow natural language instructions.*
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/model_doc/blip2_architecture.jpg"
alt="drawing" width="600"/>
<small> BLIP-2 architecture. Taken from the <a href="https://arxiv.org/abs/2301.12597">original paper.</a> </small>
This model was contributed by [nielsr](https://huggingface.co/nielsr).
The original code can be found [here](https://github.com/salesforce/LAVIS/tree/5ee63d688ba4cebff63acee04adaef2dee9af207).
## Usage tips
- BLIP-2 can be used for conditional text generation given an image and an optional text prompt. At inference time, it's recommended to use the [`generate`] method.
- One can use [`Blip2Processor`] to prepare images for the model, and decode the predicted tokens ID's back to text.
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with BLIP-2.
- Demo notebooks for BLIP-2 for image captioning, visual question answering (VQA) and chat-like conversations can be found [here](https://github.com/NielsRogge/Transformers-Tutorials/tree/master/BLIP-2).
If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
## Blip2Config
[[autodoc]] Blip2Config
- from_vision_qformer_text_configs
## Blip2VisionConfig
[[autodoc]] Blip2VisionConfig
## Blip2QFormerConfig
[[autodoc]] Blip2QFormerConfig
## Blip2Processor
[[autodoc]] Blip2Processor
## Blip2VisionModel
[[autodoc]] Blip2VisionModel
- forward
## Blip2QFormerModel
[[autodoc]] Blip2QFormerModel
- forward
## Blip2Model
[[autodoc]] Blip2Model
- forward
- get_text_features
- get_image_features
- get_qformer_features
## Blip2ForConditionalGeneration
[[autodoc]] Blip2ForConditionalGeneration
- forward
- generate | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/fuyu.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Fuyu
## Overview
The Fuyu model was created by [ADEPT](https://www.adept.ai/blog/fuyu-8b), and authored by Rohan Bavishi, Erich Elsen, Curtis Hawthorne, Maxwell Nye, Augustus Odena, Arushi Somani, Sağnak Taşırlar.
The authors introduced Fuyu-8B, a decoder-only multimodal model based on the classic transformers architecture, with query and key normalization. A linear encoder is added to create multimodal embeddings from image inputs.
By treating image tokens like text tokens and using a special image-newline character, the model knows when an image line ends. Image positional embeddings are removed. This avoids the need for different training phases for various image resolutions. With 8 billion parameters and licensed under CC-BY-NC, Fuyu-8B is notable for its ability to handle both text and images, its impressive context size of 16K, and its overall performance.
<Tip warning={true}>
The `Fuyu` models were trained using `bfloat16`, but the original inference uses `float16` The checkpoints uploaded on the hub use `torch_dtype = 'float16'` which will be
used by the `AutoModel` API to cast the checkpoints from `torch.float32` to `torch.float16`.
The `dtype` of the online weights is mostly irrelevant, unless you are using `torch_dtype="auto"` when initializing a model using `model = AutoModelForCausalLM.from_pretrained("path", torch_dtype = "auto")`. The reason is that the model will first be downloaded ( using the `dtype` of the checkpoints online) then it will be cast to the default `dtype` of `torch` (becomes `torch.float32`). Users should specify the `torch_dtype` they want, and if they don't it will be `torch.float32`.
Finetuning the model in `float16` is not recommended and known to produce `nan`, as such the model should be fine-tuned in `bfloat16`.
</Tip>
Tips:
- To convert the model, you need to clone the original repository using `git clone https://github.com/persimmon-ai-labs/adept-inference`, then get the checkpoints:
```bash
git clone https://github.com/persimmon-ai-labs/adept-inference
wget path/to/fuyu-8b-model-weights.tar
tar -xvf fuyu-8b-model-weights.tar
python src/transformers/models/fuyu/convert_fuyu_weights_to_hf.py --input_dir /path/to/downloaded/fuyu/weights/ --output_dir /output/path \
--pt_model_path /path/to/fuyu_8b_release/iter_0001251/mp_rank_00/model_optim_rng.pt
--ada_lib_path /path/to/adept-inference
```
For the chat model:
```bash
wget https://axtkn4xl5cip.objectstorage.us-phoenix-1.oci.customer-oci.com/n/axtkn4xl5cip/b/adept-public-data/o/8b_chat_model_release.tar
tar -xvf 8b_base_model_release.tar
```
Then, model can be loaded via:
```py
from transformers import FuyuConfig, FuyuForCausalLM
model_config = FuyuConfig()
model = FuyuForCausalLM(model_config).from_pretrained('/output/path')
```
Inputs need to be passed through a specific Processor to have the correct formats.
A processor requires an image_processor and a tokenizer. Hence, inputs can be loaded via:
```py
from PIL import Image
from transformers import AutoTokenizer
from transformers.models.fuyu.processing_fuyu import FuyuProcessor
from transformers.models.fuyu.image_processing_fuyu import FuyuImageProcessor
tokenizer = AutoTokenizer.from_pretrained('adept-hf-collab/fuyu-8b')
image_processor = FuyuImageProcessor()
processor = FuyuProcessor(image_processor=image_processor, tokenizer=tokenizer)
text_prompt = "Generate a coco-style caption.\\n"
bus_image_url = "https://huggingface.co/datasets/hf-internal-testing/fixtures-captioning/resolve/main/bus.png"
bus_image_pil = Image.open(io.BytesIO(requests.get(bus_image_url).content))
inputs_to_model = processor(text=text_prompt, images=image_pil)
```
This model was contributed by [Molbap](https://huggingface.co/Molbap).
The original code can be found [here](https://github.com/persimmon-ai-labs/adept-inference).
- Fuyu uses a `sentencepiece` based tokenizer, with a `Unigram` model. It supports bytefallback, which is only available in `tokenizers==0.14.0` for the fast tokenizer.
The `LlamaTokenizer` is used as it is a standard wrapper around sentencepiece.
- The authors suggest to use the following prompt for image captioning: `f"Generate a coco-style caption.\\n"`
## FuyuConfig
[[autodoc]] FuyuConfig
## FuyuForCausalLM
[[autodoc]] FuyuForCausalLM
- forward
## FuyuImageProcessor
[[autodoc]] FuyuImageProcessor
- __call__
## FuyuProcessor
[[autodoc]] FuyuProcessor
- __call__
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/mgp-str.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# MGP-STR
## Overview
The MGP-STR model was proposed in [Multi-Granularity Prediction for Scene Text Recognition](https://arxiv.org/abs/2209.03592) by Peng Wang, Cheng Da, and Cong Yao. MGP-STR is a conceptually **simple** yet **powerful** vision Scene Text Recognition (STR) model, which is built upon the [Vision Transformer (ViT)](vit). To integrate linguistic knowledge, Multi-Granularity Prediction (MGP) strategy is proposed to inject information from the language modality into the model in an implicit way.
The abstract from the paper is the following:
*Scene text recognition (STR) has been an active research topic in computer vision for years. To tackle this challenging problem, numerous innovative methods have been successively proposed and incorporating linguistic knowledge into STR models has recently become a prominent trend. In this work, we first draw inspiration from the recent progress in Vision Transformer (ViT) to construct a conceptually simple yet powerful vision STR model, which is built upon ViT and outperforms previous state-of-the-art models for scene text recognition, including both pure vision models and language-augmented methods. To integrate linguistic knowledge, we further propose a Multi-Granularity Prediction strategy to inject information from the language modality into the model in an implicit way, i.e. , subword representations (BPE and WordPiece) widely-used in NLP are introduced into the output space, in addition to the conventional character level representation, while no independent language model (LM) is adopted. The resultant algorithm (termed MGP-STR) is able to push the performance envelop of STR to an even higher level. Specifically, it achieves an average recognition accuracy of 93.35% on standard benchmarks.*
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/model_doc/mgp_str_architecture.png"
alt="drawing" width="600"/>
<small> MGP-STR architecture. Taken from the <a href="https://arxiv.org/abs/2209.03592">original paper</a>. </small>
MGP-STR is trained on two synthetic datasets [MJSynth]((http://www.robots.ox.ac.uk/~vgg/data/text/)) (MJ) and SynthText(http://www.robots.ox.ac.uk/~vgg/data/scenetext/) (ST) without fine-tuning on other datasets. It achieves state-of-the-art results on six standard Latin scene text benchmarks, including 3 regular text datasets (IC13, SVT, IIIT) and 3 irregular ones (IC15, SVTP, CUTE).
This model was contributed by [yuekun](https://huggingface.co/yuekun). The original code can be found [here](https://github.com/AlibabaResearch/AdvancedLiterateMachinery/tree/main/OCR/MGP-STR).
## Inference example
[`MgpstrModel`] accepts images as input and generates three types of predictions, which represent textual information at different granularities.
The three types of predictions are fused to give the final prediction result.
The [`ViTImageProcessor`] class is responsible for preprocessing the input image and
[`MgpstrTokenizer`] decodes the generated character tokens to the target string. The
[`MgpstrProcessor`] wraps [`ViTImageProcessor`] and [`MgpstrTokenizer`]
into a single instance to both extract the input features and decode the predicted token ids.
- Step-by-step Optical Character Recognition (OCR)
```py
>>> from transformers import MgpstrProcessor, MgpstrForSceneTextRecognition
>>> import requests
>>> from PIL import Image
>>> processor = MgpstrProcessor.from_pretrained('alibaba-damo/mgp-str-base')
>>> model = MgpstrForSceneTextRecognition.from_pretrained('alibaba-damo/mgp-str-base')
>>> # load image from the IIIT-5k dataset
>>> url = "https://i.postimg.cc/ZKwLg2Gw/367-14.png"
>>> image = Image.open(requests.get(url, stream=True).raw).convert("RGB")
>>> pixel_values = processor(images=image, return_tensors="pt").pixel_values
>>> outputs = model(pixel_values)
>>> generated_text = processor.batch_decode(outputs.logits)['generated_text']
```
## MgpstrConfig
[[autodoc]] MgpstrConfig
## MgpstrTokenizer
[[autodoc]] MgpstrTokenizer
- save_vocabulary
## MgpstrProcessor
[[autodoc]] MgpstrProcessor
- __call__
- batch_decode
## MgpstrModel
[[autodoc]] MgpstrModel
- forward
## MgpstrForSceneTextRecognition
[[autodoc]] MgpstrForSceneTextRecognition
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/led.md | <!--Copyright 2020 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# LED
## Overview
The LED model was proposed in [Longformer: The Long-Document Transformer](https://arxiv.org/abs/2004.05150) by Iz
Beltagy, Matthew E. Peters, Arman Cohan.
The abstract from the paper is the following:
*Transformer-based models are unable to process long sequences due to their self-attention operation, which scales
quadratically with the sequence length. To address this limitation, we introduce the Longformer with an attention
mechanism that scales linearly with sequence length, making it easy to process documents of thousands of tokens or
longer. Longformer's attention mechanism is a drop-in replacement for the standard self-attention and combines a local
windowed attention with a task motivated global attention. Following prior work on long-sequence transformers, we
evaluate Longformer on character-level language modeling and achieve state-of-the-art results on text8 and enwik8. In
contrast to most prior work, we also pretrain Longformer and finetune it on a variety of downstream tasks. Our
pretrained Longformer consistently outperforms RoBERTa on long document tasks and sets new state-of-the-art results on
WikiHop and TriviaQA. We finally introduce the Longformer-Encoder-Decoder (LED), a Longformer variant for supporting
long document generative sequence-to-sequence tasks, and demonstrate its effectiveness on the arXiv summarization
dataset.*
## Usage tips
- [`LEDForConditionalGeneration`] is an extension of
[`BartForConditionalGeneration`] exchanging the traditional *self-attention* layer with
*Longformer*'s *chunked self-attention* layer. [`LEDTokenizer`] is an alias of
[`BartTokenizer`].
- LED works very well on long-range *sequence-to-sequence* tasks where the `input_ids` largely exceed a length of
1024 tokens.
- LED pads the `input_ids` to be a multiple of `config.attention_window` if required. Therefore a small speed-up is
gained, when [`LEDTokenizer`] is used with the `pad_to_multiple_of` argument.
- LED makes use of *global attention* by means of the `global_attention_mask` (see
[`LongformerModel`]). For summarization, it is advised to put *global attention* only on the first
`<s>` token. For question answering, it is advised to put *global attention* on all tokens of the question.
- To fine-tune LED on all 16384, *gradient checkpointing* can be enabled in case training leads to out-of-memory (OOM)
errors. This can be done by executing `model.gradient_checkpointing_enable()`.
Moreover, the `use_cache=False`
flag can be used to disable the caching mechanism to save memory.
- LED is a model with absolute position embeddings so it's usually advised to pad the inputs on the right rather than
the left.
This model was contributed by [patrickvonplaten](https://huggingface.co/patrickvonplaten).
## Resources
- [A notebook showing how to evaluate LED](https://colab.research.google.com/drive/12INTTR6n64TzS4RrXZxMSXfrOd9Xzamo?usp=sharing).
- [A notebook showing how to fine-tune LED](https://colab.research.google.com/drive/12LjJazBl7Gam0XBPy_y0CTOJZeZ34c2v?usp=sharing).
- [Text classification task guide](../tasks/sequence_classification)
- [Question answering task guide](../tasks/question_answering)
- [Translation task guide](../tasks/translation)
- [Summarization task guide](../tasks/summarization)
## LEDConfig
[[autodoc]] LEDConfig
## LEDTokenizer
[[autodoc]] LEDTokenizer
- build_inputs_with_special_tokens
- get_special_tokens_mask
- create_token_type_ids_from_sequences
- save_vocabulary
## LEDTokenizerFast
[[autodoc]] LEDTokenizerFast
## LED specific outputs
[[autodoc]] models.led.modeling_led.LEDEncoderBaseModelOutput
[[autodoc]] models.led.modeling_led.LEDSeq2SeqModelOutput
[[autodoc]] models.led.modeling_led.LEDSeq2SeqLMOutput
[[autodoc]] models.led.modeling_led.LEDSeq2SeqSequenceClassifierOutput
[[autodoc]] models.led.modeling_led.LEDSeq2SeqQuestionAnsweringModelOutput
[[autodoc]] models.led.modeling_tf_led.TFLEDEncoderBaseModelOutput
[[autodoc]] models.led.modeling_tf_led.TFLEDSeq2SeqModelOutput
[[autodoc]] models.led.modeling_tf_led.TFLEDSeq2SeqLMOutput
<frameworkcontent>
<pt>
## LEDModel
[[autodoc]] LEDModel
- forward
## LEDForConditionalGeneration
[[autodoc]] LEDForConditionalGeneration
- forward
## LEDForSequenceClassification
[[autodoc]] LEDForSequenceClassification
- forward
## LEDForQuestionAnswering
[[autodoc]] LEDForQuestionAnswering
- forward
</pt>
<tf>
## TFLEDModel
[[autodoc]] TFLEDModel
- call
## TFLEDForConditionalGeneration
[[autodoc]] TFLEDForConditionalGeneration
- call
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/regnet.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# RegNet
## Overview
The RegNet model was proposed in [Designing Network Design Spaces](https://arxiv.org/abs/2003.13678) by Ilija Radosavovic, Raj Prateek Kosaraju, Ross Girshick, Kaiming He, Piotr Dollár.
The authors design search spaces to perform Neural Architecture Search (NAS). They first start from a high dimensional search space and iteratively reduce the search space by empirically applying constraints based on the best-performing models sampled by the current search space.
The abstract from the paper is the following:
*In this work, we present a new network design paradigm. Our goal is to help advance the understanding of network design and discover design principles that generalize across settings. Instead of focusing on designing individual network instances, we design network design spaces that parametrize populations of networks. The overall process is analogous to classic manual design of networks, but elevated to the design space level. Using our methodology we explore the structure aspect of network design and arrive at a low-dimensional design space consisting of simple, regular networks that we call RegNet. The core insight of the RegNet parametrization is surprisingly simple: widths and depths of good networks can be explained by a quantized linear function. We analyze the RegNet design space and arrive at interesting findings that do not match the current practice of network design. The RegNet design space provides simple and fast networks that work well across a wide range of flop regimes. Under comparable training settings and flops, the RegNet models outperform the popular EfficientNet models while being up to 5x faster on GPUs.*
This model was contributed by [Francesco](https://huggingface.co/Francesco). The TensorFlow version of the model
was contributed by [sayakpaul](https://huggingface.co/sayakpaul) and [ariG23498](https://huggingface.co/ariG23498).
The original code can be found [here](https://github.com/facebookresearch/pycls).
The huge 10B model from [Self-supervised Pretraining of Visual Features in the Wild](https://arxiv.org/abs/2103.01988),
trained on one billion Instagram images, is available on the [hub](https://huggingface.co/facebook/regnet-y-10b-seer)
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with RegNet.
<PipelineTag pipeline="image-classification"/>
- [`RegNetForImageClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/image-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/image_classification.ipynb).
- See also: [Image classification task guide](../tasks/image_classification)
If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
## RegNetConfig
[[autodoc]] RegNetConfig
<frameworkcontent>
<pt>
## RegNetModel
[[autodoc]] RegNetModel
- forward
## RegNetForImageClassification
[[autodoc]] RegNetForImageClassification
- forward
</pt>
<tf>
## TFRegNetModel
[[autodoc]] TFRegNetModel
- call
## TFRegNetForImageClassification
[[autodoc]] TFRegNetForImageClassification
- call
</tf>
<jax>
## FlaxRegNetModel
[[autodoc]] FlaxRegNetModel
- __call__
## FlaxRegNetForImageClassification
[[autodoc]] FlaxRegNetForImageClassification
- __call__
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/vitdet.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
-->
# ViTDet
## Overview
The ViTDet model was proposed in [Exploring Plain Vision Transformer Backbones for Object Detection](https://arxiv.org/abs/2203.16527) by Yanghao Li, Hanzi Mao, Ross Girshick, Kaiming He.
VitDet leverages the plain [Vision Transformer](vit) for the task of object detection.
The abstract from the paper is the following:
*We explore the plain, non-hierarchical Vision Transformer (ViT) as a backbone network for object detection. This design enables the original ViT architecture to be fine-tuned for object detection without needing to redesign a hierarchical backbone for pre-training. With minimal adaptations for fine-tuning, our plain-backbone detector can achieve competitive results. Surprisingly, we observe: (i) it is sufficient to build a simple feature pyramid from a single-scale feature map (without the common FPN design) and (ii) it is sufficient to use window attention (without shifting) aided with very few cross-window propagation blocks. With plain ViT backbones pre-trained as Masked Autoencoders (MAE), our detector, named ViTDet, can compete with the previous leading methods that were all based on hierarchical backbones, reaching up to 61.3 AP_box on the COCO dataset using only ImageNet-1K pre-training. We hope our study will draw attention to research on plain-backbone detectors.*
This model was contributed by [nielsr](https://huggingface.co/nielsr).
The original code can be found [here](https://github.com/facebookresearch/detectron2/tree/main/projects/ViTDet).
Tips:
- At the moment, only the backbone is available.
## VitDetConfig
[[autodoc]] VitDetConfig
## VitDetModel
[[autodoc]] VitDetModel
- forward | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/roberta-prelayernorm.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# RoBERTa-PreLayerNorm
## Overview
The RoBERTa-PreLayerNorm model was proposed in [fairseq: A Fast, Extensible Toolkit for Sequence Modeling](https://arxiv.org/abs/1904.01038) by Myle Ott, Sergey Edunov, Alexei Baevski, Angela Fan, Sam Gross, Nathan Ng, David Grangier, Michael Auli.
It is identical to using the `--encoder-normalize-before` flag in [fairseq](https://fairseq.readthedocs.io/).
The abstract from the paper is the following:
*fairseq is an open-source sequence modeling toolkit that allows researchers and developers to train custom models for translation, summarization, language modeling, and other text generation tasks. The toolkit is based on PyTorch and supports distributed training across multiple GPUs and machines. We also support fast mixed-precision training and inference on modern GPUs.*
This model was contributed by [andreasmaden](https://huggingface.co/andreasmadsen).
The original code can be found [here](https://github.com/princeton-nlp/DinkyTrain).
## Usage tips
- The implementation is the same as [Roberta](roberta) except instead of using _Add and Norm_ it does _Norm and Add_. _Add_ and _Norm_ refers to the Addition and LayerNormalization as described in [Attention Is All You Need](https://arxiv.org/abs/1706.03762).
- This is identical to using the `--encoder-normalize-before` flag in [fairseq](https://fairseq.readthedocs.io/).
## Resources
- [Text classification task guide](../tasks/sequence_classification)
- [Token classification task guide](../tasks/token_classification)
- [Question answering task guide](../tasks/question_answering)
- [Causal language modeling task guide](../tasks/language_modeling)
- [Masked language modeling task guide](../tasks/masked_language_modeling)
- [Multiple choice task guide](../tasks/multiple_choice)
## RobertaPreLayerNormConfig
[[autodoc]] RobertaPreLayerNormConfig
<frameworkcontent>
<pt>
## RobertaPreLayerNormModel
[[autodoc]] RobertaPreLayerNormModel
- forward
## RobertaPreLayerNormForCausalLM
[[autodoc]] RobertaPreLayerNormForCausalLM
- forward
## RobertaPreLayerNormForMaskedLM
[[autodoc]] RobertaPreLayerNormForMaskedLM
- forward
## RobertaPreLayerNormForSequenceClassification
[[autodoc]] RobertaPreLayerNormForSequenceClassification
- forward
## RobertaPreLayerNormForMultipleChoice
[[autodoc]] RobertaPreLayerNormForMultipleChoice
- forward
## RobertaPreLayerNormForTokenClassification
[[autodoc]] RobertaPreLayerNormForTokenClassification
- forward
## RobertaPreLayerNormForQuestionAnswering
[[autodoc]] RobertaPreLayerNormForQuestionAnswering
- forward
</pt>
<tf>
## TFRobertaPreLayerNormModel
[[autodoc]] TFRobertaPreLayerNormModel
- call
## TFRobertaPreLayerNormForCausalLM
[[autodoc]] TFRobertaPreLayerNormForCausalLM
- call
## TFRobertaPreLayerNormForMaskedLM
[[autodoc]] TFRobertaPreLayerNormForMaskedLM
- call
## TFRobertaPreLayerNormForSequenceClassification
[[autodoc]] TFRobertaPreLayerNormForSequenceClassification
- call
## TFRobertaPreLayerNormForMultipleChoice
[[autodoc]] TFRobertaPreLayerNormForMultipleChoice
- call
## TFRobertaPreLayerNormForTokenClassification
[[autodoc]] TFRobertaPreLayerNormForTokenClassification
- call
## TFRobertaPreLayerNormForQuestionAnswering
[[autodoc]] TFRobertaPreLayerNormForQuestionAnswering
- call
</tf>
<jax>
## FlaxRobertaPreLayerNormModel
[[autodoc]] FlaxRobertaPreLayerNormModel
- __call__
## FlaxRobertaPreLayerNormForCausalLM
[[autodoc]] FlaxRobertaPreLayerNormForCausalLM
- __call__
## FlaxRobertaPreLayerNormForMaskedLM
[[autodoc]] FlaxRobertaPreLayerNormForMaskedLM
- __call__
## FlaxRobertaPreLayerNormForSequenceClassification
[[autodoc]] FlaxRobertaPreLayerNormForSequenceClassification
- __call__
## FlaxRobertaPreLayerNormForMultipleChoice
[[autodoc]] FlaxRobertaPreLayerNormForMultipleChoice
- __call__
## FlaxRobertaPreLayerNormForTokenClassification
[[autodoc]] FlaxRobertaPreLayerNormForTokenClassification
- __call__
## FlaxRobertaPreLayerNormForQuestionAnswering
[[autodoc]] FlaxRobertaPreLayerNormForQuestionAnswering
- __call__
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/tvlt.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# TVLT
## Overview
The TVLT model was proposed in [TVLT: Textless Vision-Language Transformer](https://arxiv.org/abs/2209.14156)
by Zineng Tang, Jaemin Cho, Yixin Nie, Mohit Bansal (the first three authors contributed equally). The Textless Vision-Language Transformer (TVLT) is a model that uses raw visual and audio inputs for vision-and-language representation learning, without using text-specific modules such as tokenization or automatic speech recognition (ASR). It can perform various audiovisual and vision-language tasks like retrieval, question answering, etc.
The abstract from the paper is the following:
*In this work, we present the Textless Vision-Language Transformer (TVLT), where homogeneous transformer blocks take raw visual and audio inputs for vision-and-language representation learning with minimal modality-specific design, and do not use text-specific modules such as tokenization or automatic speech recognition (ASR). TVLT is trained by reconstructing masked patches of continuous video frames and audio spectrograms (masked autoencoding) and contrastive modeling to align video and audio. TVLT attains performance comparable to its text-based counterpart on various multimodal tasks, such as visual question answering, image retrieval, video retrieval, and multimodal sentiment analysis, with 28x faster inference speed and only 1/3 of the parameters. Our findings suggest the possibility of learning compact and efficient visual-linguistic representations from low-level visual and audio signals without assuming the prior existence of text.*
<p align="center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/model_doc/tvlt_architecture.png"
alt="drawing" width="600"/>
</p>
<small> TVLT architecture. Taken from the <a href="[https://arxiv.org/abs/2102.03334](https://arxiv.org/abs/2209.14156)">original paper</a>. </small>
The original code can be found [here](https://github.com/zinengtang/TVLT). This model was contributed by [Zineng Tang](https://huggingface.co/ZinengTang).
## Usage tips
- TVLT is a model that takes both `pixel_values` and `audio_values` as input. One can use [`TvltProcessor`] to prepare data for the model.
This processor wraps an image processor (for the image/video modality) and an audio feature extractor (for the audio modality) into one.
- TVLT is trained with images/videos and audios of various sizes: the authors resize and crop the input images/videos to 224 and limit the length of audio spectrogram to 2048. To make batching of videos and audios possible, the authors use a `pixel_mask` that indicates which pixels are real/padding and `audio_mask` that indicates which audio values are real/padding.
- The design of TVLT is very similar to that of a standard Vision Transformer (ViT) and masked autoencoder (MAE) as in [ViTMAE](vitmae). The difference is that the model includes embedding layers for the audio modality.
- The PyTorch version of this model is only available in torch 1.10 and higher.
## TvltConfig
[[autodoc]] TvltConfig
## TvltProcessor
[[autodoc]] TvltProcessor
- __call__
## TvltImageProcessor
[[autodoc]] TvltImageProcessor
- preprocess
## TvltFeatureExtractor
[[autodoc]] TvltFeatureExtractor
- __call__
## TvltModel
[[autodoc]] TvltModel
- forward
## TvltForPreTraining
[[autodoc]] TvltForPreTraining
- forward
## TvltForAudioVisualClassification
[[autodoc]] TvltForAudioVisualClassification
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/gpt_neo.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# GPT Neo
## Overview
The GPTNeo model was released in the [EleutherAI/gpt-neo](https://github.com/EleutherAI/gpt-neo) repository by Sid
Black, Stella Biderman, Leo Gao, Phil Wang and Connor Leahy. It is a GPT2 like causal language model trained on the
[Pile](https://pile.eleuther.ai/) dataset.
The architecture is similar to GPT2 except that GPT Neo uses local attention in every other layer with a window size of
256 tokens.
This model was contributed by [valhalla](https://huggingface.co/valhalla).
## Usage example
The `generate()` method can be used to generate text using GPT Neo model.
```python
>>> from transformers import GPTNeoForCausalLM, GPT2Tokenizer
>>> model = GPTNeoForCausalLM.from_pretrained("EleutherAI/gpt-neo-1.3B")
>>> tokenizer = GPT2Tokenizer.from_pretrained("EleutherAI/gpt-neo-1.3B")
>>> prompt = (
... "In a shocking finding, scientists discovered a herd of unicorns living in a remote, "
... "previously unexplored valley, in the Andes Mountains. Even more surprising to the "
... "researchers was the fact that the unicorns spoke perfect English."
... )
>>> input_ids = tokenizer(prompt, return_tensors="pt").input_ids
>>> gen_tokens = model.generate(
... input_ids,
... do_sample=True,
... temperature=0.9,
... max_length=100,
... )
>>> gen_text = tokenizer.batch_decode(gen_tokens)[0]
```
## Combining GPT-Neo and Flash Attention 2
First, make sure to install the latest version of Flash Attention 2 to include the sliding window attention feature, and make sure your hardware is compatible with Flash-Attention 2. More details are available [here](https://huggingface.co/docs/transformers/perf_infer_gpu_one#flashattention-2) concerning the installation.
Make sure as well to load your model in half-precision (e.g. `torch.float16`).
To load and run a model using Flash Attention 2, refer to the snippet below:
```python
>>> import torch
>>> from transformers import AutoModelForCausalLM, AutoTokenizer
>>> device = "cuda" # the device to load the model onto
>>> model = AutoModelForCausalLM.from_pretrained("EleutherAI/gpt-neo-2.7B", torch_dtype=torch.float16, attn_implementation="flash_attention_2")
>>> tokenizer = AutoTokenizer.from_pretrained("EleutherAI/gpt-neo-2.7B")
>>> prompt = "def hello_world():"
>>> model_inputs = tokenizer([prompt], return_tensors="pt").to(device)
>>> model.to(device)
>>> generated_ids = model.generate(**model_inputs, max_new_tokens=100, do_sample=True)
>>> tokenizer.batch_decode(generated_ids)[0]
"def hello_world():\n >>> run_script("hello.py")\n >>> exit(0)\n<|endoftext|>"
```
### Expected speedups
Below is an expected speedup diagram that compares pure inference time between the native implementation in transformers using `EleutherAI/gpt-neo-2.7B` checkpoint and the Flash Attention 2 version of the model.
Note that for GPT-Neo it is not possible to train / run on very long context as the max [position embeddings](https://huggingface.co/EleutherAI/gpt-neo-2.7B/blob/main/config.json#L58 ) is limited to 2048 - but this is applicable to all gpt-neo models and not specific to FA-2
<div style="text-align: center">
<img src="https://user-images.githubusercontent.com/49240599/272241893-b1c66b75-3a48-4265-bc47-688448568b3d.png">
</div>
## Resources
- [Text classification task guide](../tasks/sequence_classification)
- [Causal language modeling task guide](../tasks/language_modeling)
## GPTNeoConfig
[[autodoc]] GPTNeoConfig
<frameworkcontent>
<pt>
## GPTNeoModel
[[autodoc]] GPTNeoModel
- forward
## GPTNeoForCausalLM
[[autodoc]] GPTNeoForCausalLM
- forward
## GPTNeoForQuestionAnswering
[[autodoc]] GPTNeoForQuestionAnswering
- forward
## GPTNeoForSequenceClassification
[[autodoc]] GPTNeoForSequenceClassification
- forward
## GPTNeoForTokenClassification
[[autodoc]] GPTNeoForTokenClassification
- forward
</pt>
<jax>
## FlaxGPTNeoModel
[[autodoc]] FlaxGPTNeoModel
- __call__
## FlaxGPTNeoForCausalLM
[[autodoc]] FlaxGPTNeoForCausalLM
- __call__
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/vision-text-dual-encoder.md | <!--Copyright 2021 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# VisionTextDualEncoder
## Overview
The [`VisionTextDualEncoderModel`] can be used to initialize a vision-text dual encoder model with
any pretrained vision autoencoding model as the vision encoder (*e.g.* [ViT](vit), [BEiT](beit), [DeiT](deit)) and any pretrained text autoencoding model as the text encoder (*e.g.* [RoBERTa](roberta), [BERT](bert)). Two projection layers are added on top of both the vision and text encoder to project the output embeddings
to a shared latent space. The projection layers are randomly initialized so the model should be fine-tuned on a
downstream task. This model can be used to align the vision-text embeddings using CLIP like contrastive image-text
training and then can be used for zero-shot vision tasks such image-classification or retrieval.
In [LiT: Zero-Shot Transfer with Locked-image Text Tuning](https://arxiv.org/abs/2111.07991) it is shown how
leveraging pre-trained (locked/frozen) image and text model for contrastive learning yields significant improvement on
new zero-shot vision tasks such as image classification or retrieval.
## VisionTextDualEncoderConfig
[[autodoc]] VisionTextDualEncoderConfig
## VisionTextDualEncoderProcessor
[[autodoc]] VisionTextDualEncoderProcessor
<frameworkcontent>
<pt>
## VisionTextDualEncoderModel
[[autodoc]] VisionTextDualEncoderModel
- forward
</pt>
<tf>
## FlaxVisionTextDualEncoderModel
[[autodoc]] FlaxVisionTextDualEncoderModel
- __call__
</tf>
<jax>
## TFVisionTextDualEncoderModel
[[autodoc]] TFVisionTextDualEncoderModel
- call
</jax>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/tvp.md | <!--Copyright 2023 The Intel Team Authors and HuggingFace Inc. team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
-->
# TVP
## Overview
The text-visual prompting (TVP) framework was proposed in the paper [Text-Visual Prompting for Efficient 2D Temporal Video Grounding](https://arxiv.org/abs/2303.04995) by Yimeng Zhang, Xin Chen, Jinghan Jia, Sijia Liu, Ke Ding.
The abstract from the paper is the following:
*In this paper, we study the problem of temporal video grounding (TVG), which aims to predict the starting/ending time points of moments described by a text sentence within a long untrimmed video. Benefiting from fine-grained 3D visual features, the TVG techniques have achieved remarkable progress in recent years. However, the high complexity of 3D convolutional neural networks (CNNs) makes extracting dense 3D visual features time-consuming, which calls for intensive memory and computing resources. Towards efficient TVG, we propose a novel text-visual prompting (TVP) framework, which incorporates optimized perturbation patterns (that we call ‘prompts’) into both visual inputs and textual features of a TVG model. In sharp contrast to 3D CNNs, we show that TVP allows us to effectively co-train vision encoder and language encoder in a 2D TVG model and improves the performance of cross-modal feature fusion using only low-complexity sparse 2D visual features. Further, we propose a Temporal-Distance IoU (TDIoU) loss for efficient learning of TVG. Experiments on two benchmark datasets, Charades-STA and ActivityNet Captions datasets, empirically show that the proposed TVP significantly boosts the performance of 2D TVG (e.g., 9.79% improvement on Charades-STA and 30.77% improvement on ActivityNet Captions) and achieves 5× inference acceleration over TVG using 3D visual features.*
This research addresses temporal video grounding (TVG), which is the process of pinpointing the start and end times of specific events in a long video, as described by a text sentence. Text-visual prompting (TVP), is proposed to enhance TVG. TVP involves integrating specially designed patterns, known as 'prompts', into both the visual (image-based) and textual (word-based) input components of a TVG model. These prompts provide additional spatial-temporal context, improving the model's ability to accurately determine event timings in the video. The approach employs 2D visual inputs in place of 3D ones. Although 3D inputs offer more spatial-temporal detail, they are also more time-consuming to process. The use of 2D inputs with the prompting method aims to provide similar levels of context and accuracy more efficiently.
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/model_doc/tvp_architecture.png"
alt="drawing" width="600"/>
<small> TVP architecture. Taken from the <a href="https://arxiv.org/abs/2303.04995">original paper.</a> </small>
This model was contributed by [Jiqing Feng](https://huggingface.co/Jiqing). The original code can be found [here](https://github.com/intel/TVP).
## Usage tips and examples
Prompts are optimized perturbation patterns, which would be added to input video frames or text features. Universal set refers to using the same exact set of prompts for any input, this means that these prompts are added consistently to all video frames and text features, regardless of the input's content.
TVP consists of a visual encoder and cross-modal encoder. A universal set of visual prompts and text prompts to be integrated into sampled video frames and textual features, respectively. Specially, a set of different visual prompts are applied to uniformly-sampled frames of one untrimmed video in order.
The goal of this model is to incorporate trainable prompts into both visual inputs and textual features to temporal video grounding(TVG) problems.
In principle, one can apply any visual, cross-modal encoder in the proposed architecture.
The [`TvpProcessor`] wraps [`BertTokenizer`] and [`TvpImageProcessor`] into a single instance to both
encode the text and prepare the images respectively.
The following example shows how to run temporal video grounding using [`TvpProcessor`] and [`TvpForVideoGrounding`].
```python
import av
import cv2
import numpy as np
import torch
from huggingface_hub import hf_hub_download
from transformers import AutoProcessor, TvpForVideoGrounding
def pyav_decode(container, sampling_rate, num_frames, clip_idx, num_clips, target_fps):
'''
Convert the video from its original fps to the target_fps and decode the video with PyAV decoder.
Args:
container (container): pyav container.
sampling_rate (int): frame sampling rate (interval between two sampled frames).
num_frames (int): number of frames to sample.
clip_idx (int): if clip_idx is -1, perform random temporal sampling.
If clip_idx is larger than -1, uniformly split the video to num_clips
clips, and select the clip_idx-th video clip.
num_clips (int): overall number of clips to uniformly sample from the given video.
target_fps (int): the input video may have different fps, convert it to
the target video fps before frame sampling.
Returns:
frames (tensor): decoded frames from the video. Return None if the no
video stream was found.
fps (float): the number of frames per second of the video.
'''
video = container.streams.video[0]
fps = float(video.average_rate)
clip_size = sampling_rate * num_frames / target_fps * fps
delta = max(num_frames - clip_size, 0)
start_idx = delta * clip_idx / num_clips
end_idx = start_idx + clip_size - 1
timebase = video.duration / num_frames
video_start_pts = int(start_idx * timebase)
video_end_pts = int(end_idx * timebase)
seek_offset = max(video_start_pts - 1024, 0)
container.seek(seek_offset, any_frame=False, backward=True, stream=video)
frames = {}
for frame in container.decode(video=0):
if frame.pts < video_start_pts:
continue
frames[frame.pts] = frame
if frame.pts > video_end_pts:
break
frames = [frames[pts] for pts in sorted(frames)]
return frames, fps
def decode(container, sampling_rate, num_frames, clip_idx, num_clips, target_fps):
'''
Decode the video and perform temporal sampling.
Args:
container (container): pyav container.
sampling_rate (int): frame sampling rate (interval between two sampled frames).
num_frames (int): number of frames to sample.
clip_idx (int): if clip_idx is -1, perform random temporal sampling.
If clip_idx is larger than -1, uniformly split the video to num_clips
clips, and select the clip_idx-th video clip.
num_clips (int): overall number of clips to uniformly sample from the given video.
target_fps (int): the input video may have different fps, convert it to
the target video fps before frame sampling.
Returns:
frames (tensor): decoded frames from the video.
'''
assert clip_idx >= -2, "Not a valied clip_idx {}".format(clip_idx)
frames, fps = pyav_decode(container, sampling_rate, num_frames, clip_idx, num_clips, target_fps)
clip_size = sampling_rate * num_frames / target_fps * fps
index = np.linspace(0, clip_size - 1, num_frames)
index = np.clip(index, 0, len(frames) - 1).astype(np.int64)
frames = np.array([frames[idx].to_rgb().to_ndarray() for idx in index])
frames = frames.transpose(0, 3, 1, 2)
return frames
file = hf_hub_download(repo_id="Intel/tvp_demo", filename="AK2KG.mp4", repo_type="dataset")
model = TvpForVideoGrounding.from_pretrained("Intel/tvp-base")
decoder_kwargs = dict(
container=av.open(file, metadata_errors="ignore"),
sampling_rate=1,
num_frames=model.config.num_frames,
clip_idx=0,
num_clips=1,
target_fps=3,
)
raw_sampled_frms = decode(**decoder_kwargs)
text = "a person is sitting on a bed."
processor = AutoProcessor.from_pretrained("Intel/tvp-base")
model_inputs = processor(
text=[text], videos=list(raw_sampled_frms), return_tensors="pt", max_text_length=100#, size=size
)
model_inputs["pixel_values"] = model_inputs["pixel_values"].to(model.dtype)
output = model(**model_inputs)
def get_video_duration(filename):
cap = cv2.VideoCapture(filename)
if cap.isOpened():
rate = cap.get(5)
frame_num = cap.get(7)
duration = frame_num/rate
return duration
return -1
duration = get_video_duration(file)
start, end = processor.post_process_video_grounding(output.logits, duration)
print(f"The time slot of the video corresponding to the text \"{text}\" is from {start}s to {end}s")
```
Tips:
- This implementation of TVP uses [`BertTokenizer`] to generate text embeddings and Resnet-50 model to compute visual embeddings.
- Checkpoints for pre-trained [tvp-base](https://huggingface.co/Intel/tvp-base) is released.
- Please refer to [Table 2](https://arxiv.org/pdf/2303.04995.pdf) for TVP's performance on Temporal Video Grounding task.
## TvpConfig
[[autodoc]] TvpConfig
## TvpImageProcessor
[[autodoc]] TvpImageProcessor
- preprocess
## TvpProcessor
[[autodoc]] TvpProcessor
- __call__
## TvpModel
[[autodoc]] TvpModel
- forward
## TvpForVideoGrounding
[[autodoc]] TvpForVideoGrounding
- forward
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/model_doc/convnextv2.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# ConvNeXt V2
## Overview
The ConvNeXt V2 model was proposed in [ConvNeXt V2: Co-designing and Scaling ConvNets with Masked Autoencoders](https://arxiv.org/abs/2301.00808) by Sanghyun Woo, Shoubhik Debnath, Ronghang Hu, Xinlei Chen, Zhuang Liu, In So Kweon, Saining Xie.
ConvNeXt V2 is a pure convolutional model (ConvNet), inspired by the design of Vision Transformers, and a successor of [ConvNeXT](convnext).
The abstract from the paper is the following:
*Driven by improved architectures and better representation learning frameworks, the field of visual recognition has enjoyed rapid modernization and performance boost in the early 2020s. For example, modern ConvNets, represented by ConvNeXt, have demonstrated strong performance in various scenarios. While these models were originally designed for supervised learning with ImageNet labels, they can also potentially benefit from self-supervised learning techniques such as masked autoencoders (MAE). However, we found that simply combining these two approaches leads to subpar performance. In this paper, we propose a fully convolutional masked autoencoder framework and a new Global Response Normalization (GRN) layer that can be added to the ConvNeXt architecture to enhance inter-channel feature competition. This co-design of self-supervised learning techniques and architectural improvement results in a new model family called ConvNeXt V2, which significantly improves the performance of pure ConvNets on various recognition benchmarks, including ImageNet classification, COCO detection, and ADE20K segmentation. We also provide pre-trained ConvNeXt V2 models of various sizes, ranging from an efficient 3.7M-parameter Atto model with 76.7% top-1 accuracy on ImageNet, to a 650M Huge model that achieves a state-of-the-art 88.9% accuracy using only public training data.*
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/convnextv2_architecture.png"
alt="drawing" width="600"/>
<small> ConvNeXt V2 architecture. Taken from the <a href="https://arxiv.org/abs/2301.00808">original paper</a>.</small>
This model was contributed by [adirik](https://huggingface.co/adirik). The original code can be found [here](https://github.com/facebookresearch/ConvNeXt-V2).
## Resources
A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with ConvNeXt V2.
<PipelineTag pipeline="image-classification"/>
- [`ConvNextV2ForImageClassification`] is supported by this [example script](https://github.com/huggingface/transformers/tree/main/examples/pytorch/image-classification) and [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/image_classification.ipynb).
If you're interested in submitting a resource to be included here, please feel free to open a Pull Request and we'll review it! The resource should ideally demonstrate something new instead of duplicating an existing resource.
## ConvNextV2Config
[[autodoc]] ConvNextV2Config
## ConvNextV2Model
[[autodoc]] ConvNextV2Model
- forward
## ConvNextV2ForImageClassification
[[autodoc]] ConvNextV2ForImageClassification
- forward
## TFConvNextV2Model
[[autodoc]] TFConvNextV2Model
- call
## TFConvNextV2ForImageClassification
[[autodoc]] TFConvNextV2ForImageClassification
- call
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/document_question_answering.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Document Question Answering
[[open-in-colab]]
Document Question Answering, also referred to as Document Visual Question Answering, is a task that involves providing
answers to questions posed about document images. The input to models supporting this task is typically a combination of an image and
a question, and the output is an answer expressed in natural language. These models utilize multiple modalities, including
text, the positions of words (bounding boxes), and the image itself.
This guide illustrates how to:
- Fine-tune [LayoutLMv2](../model_doc/layoutlmv2) on the [DocVQA dataset](https://huggingface.co/datasets/nielsr/docvqa_1200_examples_donut).
- Use your fine-tuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[LayoutLM](../model_doc/layoutlm), [LayoutLMv2](../model_doc/layoutlmv2), [LayoutLMv3](../model_doc/layoutlmv3)
<!--End of the generated tip-->
</Tip>
LayoutLMv2 solves the document question-answering task by adding a question-answering head on top of the final hidden
states of the tokens, to predict the positions of the start and end tokens of the
answer. In other words, the problem is treated as extractive question answering: given the context, extract which piece
of information answers the question. The context comes from the output of an OCR engine, here it is Google's Tesseract.
Before you begin, make sure you have all the necessary libraries installed. LayoutLMv2 depends on detectron2, torchvision and tesseract.
```bash
pip install -q transformers datasets
```
```bash
pip install 'git+https://github.com/facebookresearch/detectron2.git'
pip install torchvision
```
```bash
sudo apt install tesseract-ocr
pip install -q pytesseract
```
Once you have installed all of the dependencies, restart your runtime.
We encourage you to share your model with the community. Log in to your Hugging Face account to upload it to the 🤗 Hub.
When prompted, enter your token to log in:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
Let's define some global variables.
```py
>>> model_checkpoint = "microsoft/layoutlmv2-base-uncased"
>>> batch_size = 4
```
## Load the data
In this guide we use a small sample of preprocessed DocVQA that you can find on 🤗 Hub. If you'd like to use the full
DocVQA dataset, you can register and download it on [DocVQA homepage](https://rrc.cvc.uab.es/?ch=17). If you do so, to
proceed with this guide check out [how to load files into a 🤗 dataset](https://huggingface.co/docs/datasets/loading#local-and-remote-files).
```py
>>> from datasets import load_dataset
>>> dataset = load_dataset("nielsr/docvqa_1200_examples")
>>> dataset
DatasetDict({
train: Dataset({
features: ['id', 'image', 'query', 'answers', 'words', 'bounding_boxes', 'answer'],
num_rows: 1000
})
test: Dataset({
features: ['id', 'image', 'query', 'answers', 'words', 'bounding_boxes', 'answer'],
num_rows: 200
})
})
```
As you can see, the dataset is split into train and test sets already. Take a look at a random example to familiarize
yourself with the features.
```py
>>> dataset["train"].features
```
Here's what the individual fields represent:
* `id`: the example's id
* `image`: a PIL.Image.Image object containing the document image
* `query`: the question string - natural language asked question, in several languages
* `answers`: a list of correct answers provided by human annotators
* `words` and `bounding_boxes`: the results of OCR, which we will not use here
* `answer`: an answer matched by a different model which we will not use here
Let's leave only English questions, and drop the `answer` feature which appears to contain predictions by another model.
We'll also take the first of the answers from the set provided by the annotators. Alternatively, you can randomly sample it.
```py
>>> updated_dataset = dataset.map(lambda example: {"question": example["query"]["en"]}, remove_columns=["query"])
>>> updated_dataset = updated_dataset.map(
... lambda example: {"answer": example["answers"][0]}, remove_columns=["answer", "answers"]
... )
```
Note that the LayoutLMv2 checkpoint that we use in this guide has been trained with `max_position_embeddings = 512` (you can
find this information in the [checkpoint's `config.json` file](https://huggingface.co/microsoft/layoutlmv2-base-uncased/blob/main/config.json#L18)).
We can truncate the examples but to avoid the situation where the answer might be at the end of a large document and end up truncated,
here we'll remove the few examples where the embedding is likely to end up longer than 512.
If most of the documents in your dataset are long, you can implement a sliding window strategy - check out [this notebook](https://github.com/huggingface/notebooks/blob/main/examples/question_answering.ipynb) for details.
```py
>>> updated_dataset = updated_dataset.filter(lambda x: len(x["words"]) + len(x["question"].split()) < 512)
```
At this point let's also remove the OCR features from this dataset. These are a result of OCR for fine-tuning a different
model. They would still require some processing if we wanted to use them, as they do not match the input requirements
of the model we use in this guide. Instead, we can use the [`LayoutLMv2Processor`] on the original data for both OCR and
tokenization. This way we'll get the inputs that match model's expected input. If you want to process images manually,
check out the [`LayoutLMv2` model documentation](../model_doc/layoutlmv2) to learn what input format the model expects.
```py
>>> updated_dataset = updated_dataset.remove_columns("words")
>>> updated_dataset = updated_dataset.remove_columns("bounding_boxes")
```
Finally, the data exploration won't be complete if we don't peek at an image example.
```py
>>> updated_dataset["train"][11]["image"]
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/docvqa_example.jpg" alt="DocVQA Image Example"/>
</div>
## Preprocess the data
The Document Question Answering task is a multimodal task, and you need to make sure that the inputs from each modality
are preprocessed according to the model's expectations. Let's start by loading the [`LayoutLMv2Processor`], which internally combines an image processor that can handle image data and a tokenizer that can encode text data.
```py
>>> from transformers import AutoProcessor
>>> processor = AutoProcessor.from_pretrained(model_checkpoint)
```
### Preprocessing document images
First, let's prepare the document images for the model with the help of the `image_processor` from the processor.
By default, image processor resizes the images to 224x224, makes sure they have the correct order of color channels,
applies OCR with tesseract to get words and normalized bounding boxes. In this tutorial, all of these defaults are exactly what we need.
Write a function that applies the default image processing to a batch of images and returns the results of OCR.
```py
>>> image_processor = processor.image_processor
>>> def get_ocr_words_and_boxes(examples):
... images = [image.convert("RGB") for image in examples["image"]]
... encoded_inputs = image_processor(images)
... examples["image"] = encoded_inputs.pixel_values
... examples["words"] = encoded_inputs.words
... examples["boxes"] = encoded_inputs.boxes
... return examples
```
To apply this preprocessing to the entire dataset in a fast way, use [`~datasets.Dataset.map`].
```py
>>> dataset_with_ocr = updated_dataset.map(get_ocr_words_and_boxes, batched=True, batch_size=2)
```
### Preprocessing text data
Once we have applied OCR to the images, we need to encode the text part of the dataset to prepare it for the model.
This involves converting the words and boxes that we got in the previous step to token-level `input_ids`, `attention_mask`,
`token_type_ids` and `bbox`. For preprocessing text, we'll need the `tokenizer` from the processor.
```py
>>> tokenizer = processor.tokenizer
```
On top of the preprocessing mentioned above, we also need to add the labels for the model. For `xxxForQuestionAnswering` models
in 🤗 Transformers, the labels consist of the `start_positions` and `end_positions`, indicating which token is at the
start and which token is at the end of the answer.
Let's start with that. Define a helper function that can find a sublist (the answer split into words) in a larger list (the words list).
This function will take two lists as input, `words_list` and `answer_list`. It will then iterate over the `words_list` and check
if the current word in the `words_list` (words_list[i]) is equal to the first word of answer_list (answer_list[0]) and if
the sublist of `words_list` starting from the current word and of the same length as `answer_list` is equal `to answer_list`.
If this condition is true, it means that a match has been found, and the function will record the match, its starting index (idx),
and its ending index (idx + len(answer_list) - 1). If more than one match was found, the function will return only the first one.
If no match is found, the function returns (`None`, 0, and 0).
```py
>>> def subfinder(words_list, answer_list):
... matches = []
... start_indices = []
... end_indices = []
... for idx, i in enumerate(range(len(words_list))):
... if words_list[i] == answer_list[0] and words_list[i : i + len(answer_list)] == answer_list:
... matches.append(answer_list)
... start_indices.append(idx)
... end_indices.append(idx + len(answer_list) - 1)
... if matches:
... return matches[0], start_indices[0], end_indices[0]
... else:
... return None, 0, 0
```
To illustrate how this function finds the position of the answer, let's use it on an example:
```py
>>> example = dataset_with_ocr["train"][1]
>>> words = [word.lower() for word in example["words"]]
>>> match, word_idx_start, word_idx_end = subfinder(words, example["answer"].lower().split())
>>> print("Question: ", example["question"])
>>> print("Words:", words)
>>> print("Answer: ", example["answer"])
>>> print("start_index", word_idx_start)
>>> print("end_index", word_idx_end)
Question: Who is in cc in this letter?
Words: ['wie', 'baw', 'brown', '&', 'williamson', 'tobacco', 'corporation', 'research', '&', 'development', 'internal', 'correspondence', 'to:', 'r.', 'h.', 'honeycutt', 'ce:', 't.f.', 'riehl', 'from:', '.', 'c.j.', 'cook', 'date:', 'may', '8,', '1995', 'subject:', 'review', 'of', 'existing', 'brainstorming', 'ideas/483', 'the', 'major', 'function', 'of', 'the', 'product', 'innovation', 'graup', 'is', 'to', 'develop', 'marketable', 'nove!', 'products', 'that', 'would', 'be', 'profitable', 'to', 'manufacture', 'and', 'sell.', 'novel', 'is', 'defined', 'as:', 'of', 'a', 'new', 'kind,', 'or', 'different', 'from', 'anything', 'seen', 'or', 'known', 'before.', 'innovation', 'is', 'defined', 'as:', 'something', 'new', 'or', 'different', 'introduced;', 'act', 'of', 'innovating;', 'introduction', 'of', 'new', 'things', 'or', 'methods.', 'the', 'products', 'may', 'incorporate', 'the', 'latest', 'technologies,', 'materials', 'and', 'know-how', 'available', 'to', 'give', 'then', 'a', 'unique', 'taste', 'or', 'look.', 'the', 'first', 'task', 'of', 'the', 'product', 'innovation', 'group', 'was', 'to', 'assemble,', 'review', 'and', 'categorize', 'a', 'list', 'of', 'existing', 'brainstorming', 'ideas.', 'ideas', 'were', 'grouped', 'into', 'two', 'major', 'categories', 'labeled', 'appearance', 'and', 'taste/aroma.', 'these', 'categories', 'are', 'used', 'for', 'novel', 'products', 'that', 'may', 'differ', 'from', 'a', 'visual', 'and/or', 'taste/aroma', 'point', 'of', 'view', 'compared', 'to', 'canventional', 'cigarettes.', 'other', 'categories', 'include', 'a', 'combination', 'of', 'the', 'above,', 'filters,', 'packaging', 'and', 'brand', 'extensions.', 'appearance', 'this', 'category', 'is', 'used', 'for', 'novel', 'cigarette', 'constructions', 'that', 'yield', 'visually', 'different', 'products', 'with', 'minimal', 'changes', 'in', 'smoke', 'chemistry', 'two', 'cigarettes', 'in', 'cne.', 'emulti-plug', 'te', 'build', 'yaur', 'awn', 'cigarette.', 'eswitchable', 'menthol', 'or', 'non', 'menthol', 'cigarette.', '*cigarettes', 'with', 'interspaced', 'perforations', 'to', 'enable', 'smoker', 'to', 'separate', 'unburned', 'section', 'for', 'future', 'smoking.', '«short', 'cigarette,', 'tobacco', 'section', '30', 'mm.', '«extremely', 'fast', 'buming', 'cigarette.', '«novel', 'cigarette', 'constructions', 'that', 'permit', 'a', 'significant', 'reduction', 'iretobacco', 'weight', 'while', 'maintaining', 'smoking', 'mechanics', 'and', 'visual', 'characteristics.', 'higher', 'basis', 'weight', 'paper:', 'potential', 'reduction', 'in', 'tobacco', 'weight.', '«more', 'rigid', 'tobacco', 'column;', 'stiffing', 'agent', 'for', 'tobacco;', 'e.g.', 'starch', '*colored', 'tow', 'and', 'cigarette', 'papers;', 'seasonal', 'promotions,', 'e.g.', 'pastel', 'colored', 'cigarettes', 'for', 'easter', 'or', 'in', 'an', 'ebony', 'and', 'ivory', 'brand', 'containing', 'a', 'mixture', 'of', 'all', 'black', '(black', 'paper', 'and', 'tow)', 'and', 'ail', 'white', 'cigarettes.', '499150498']
Answer: T.F. Riehl
start_index 17
end_index 18
```
Once examples are encoded, however, they will look like this:
```py
>>> encoding = tokenizer(example["question"], example["words"], example["boxes"])
>>> tokenizer.decode(encoding["input_ids"])
[CLS] who is in cc in this letter? [SEP] wie baw brown & williamson tobacco corporation research & development ...
```
We'll need to find the position of the answer in the encoded input.
* `token_type_ids` tells us which tokens are part of the question, and which ones are part of the document's words.
* `tokenizer.cls_token_id` will help find the special token at the beginning of the input.
* `word_ids` will help match the answer found in the original `words` to the same answer in the full encoded input and determine
the start/end position of the answer in the encoded input.
With that in mind, let's create a function to encode a batch of examples in the dataset:
```py
>>> def encode_dataset(examples, max_length=512):
... questions = examples["question"]
... words = examples["words"]
... boxes = examples["boxes"]
... answers = examples["answer"]
... # encode the batch of examples and initialize the start_positions and end_positions
... encoding = tokenizer(questions, words, boxes, max_length=max_length, padding="max_length", truncation=True)
... start_positions = []
... end_positions = []
... # loop through the examples in the batch
... for i in range(len(questions)):
... cls_index = encoding["input_ids"][i].index(tokenizer.cls_token_id)
... # find the position of the answer in example's words
... words_example = [word.lower() for word in words[i]]
... answer = answers[i]
... match, word_idx_start, word_idx_end = subfinder(words_example, answer.lower().split())
... if match:
... # if match is found, use `token_type_ids` to find where words start in the encoding
... token_type_ids = encoding["token_type_ids"][i]
... token_start_index = 0
... while token_type_ids[token_start_index] != 1:
... token_start_index += 1
... token_end_index = len(encoding["input_ids"][i]) - 1
... while token_type_ids[token_end_index] != 1:
... token_end_index -= 1
... word_ids = encoding.word_ids(i)[token_start_index : token_end_index + 1]
... start_position = cls_index
... end_position = cls_index
... # loop over word_ids and increase `token_start_index` until it matches the answer position in words
... # once it matches, save the `token_start_index` as the `start_position` of the answer in the encoding
... for id in word_ids:
... if id == word_idx_start:
... start_position = token_start_index
... else:
... token_start_index += 1
... # similarly loop over `word_ids` starting from the end to find the `end_position` of the answer
... for id in word_ids[::-1]:
... if id == word_idx_end:
... end_position = token_end_index
... else:
... token_end_index -= 1
... start_positions.append(start_position)
... end_positions.append(end_position)
... else:
... start_positions.append(cls_index)
... end_positions.append(cls_index)
... encoding["image"] = examples["image"]
... encoding["start_positions"] = start_positions
... encoding["end_positions"] = end_positions
... return encoding
```
Now that we have this preprocessing function, we can encode the entire dataset:
```py
>>> encoded_train_dataset = dataset_with_ocr["train"].map(
... encode_dataset, batched=True, batch_size=2, remove_columns=dataset_with_ocr["train"].column_names
... )
>>> encoded_test_dataset = dataset_with_ocr["test"].map(
... encode_dataset, batched=True, batch_size=2, remove_columns=dataset_with_ocr["test"].column_names
... )
```
Let's check what the features of the encoded dataset look like:
```py
>>> encoded_train_dataset.features
{'image': Sequence(feature=Sequence(feature=Sequence(feature=Value(dtype='uint8', id=None), length=-1, id=None), length=-1, id=None), length=-1, id=None),
'input_ids': Sequence(feature=Value(dtype='int32', id=None), length=-1, id=None),
'token_type_ids': Sequence(feature=Value(dtype='int8', id=None), length=-1, id=None),
'attention_mask': Sequence(feature=Value(dtype='int8', id=None), length=-1, id=None),
'bbox': Sequence(feature=Sequence(feature=Value(dtype='int64', id=None), length=-1, id=None), length=-1, id=None),
'start_positions': Value(dtype='int64', id=None),
'end_positions': Value(dtype='int64', id=None)}
```
## Evaluation
Evaluation for document question answering requires a significant amount of postprocessing. To avoid taking up too much
of your time, this guide skips the evaluation step. The [`Trainer`] still calculates the evaluation loss during training so
you're not completely in the dark about your model's performance. Extractive question answering is typically evaluated using F1/exact match.
If you'd like to implement it yourself, check out the [Question Answering chapter](https://huggingface.co/course/chapter7/7?fw=pt#postprocessing)
of the Hugging Face course for inspiration.
## Train
Congratulations! You've successfully navigated the toughest part of this guide and now you are ready to train your own model.
Training involves the following steps:
* Load the model with [`AutoModelForDocumentQuestionAnswering`] using the same checkpoint as in the preprocessing.
* Define your training hyperparameters in [`TrainingArguments`].
* Define a function to batch examples together, here the [`DefaultDataCollator`] will do just fine
* Pass the training arguments to [`Trainer`] along with the model, dataset, and data collator.
* Call [`~Trainer.train`] to finetune your model.
```py
>>> from transformers import AutoModelForDocumentQuestionAnswering
>>> model = AutoModelForDocumentQuestionAnswering.from_pretrained(model_checkpoint)
```
In the [`TrainingArguments`] use `output_dir` to specify where to save your model, and configure hyperparameters as you see fit.
If you wish to share your model with the community, set `push_to_hub` to `True` (you must be signed in to Hugging Face to upload your model).
In this case the `output_dir` will also be the name of the repo where your model checkpoint will be pushed.
```py
>>> from transformers import TrainingArguments
>>> # REPLACE THIS WITH YOUR REPO ID
>>> repo_id = "MariaK/layoutlmv2-base-uncased_finetuned_docvqa"
>>> training_args = TrainingArguments(
... output_dir=repo_id,
... per_device_train_batch_size=4,
... num_train_epochs=20,
... save_steps=200,
... logging_steps=50,
... evaluation_strategy="steps",
... learning_rate=5e-5,
... save_total_limit=2,
... remove_unused_columns=False,
... push_to_hub=True,
... )
```
Define a simple data collator to batch examples together.
```py
>>> from transformers import DefaultDataCollator
>>> data_collator = DefaultDataCollator()
```
Finally, bring everything together, and call [`~Trainer.train`]:
```py
>>> from transformers import Trainer
>>> trainer = Trainer(
... model=model,
... args=training_args,
... data_collator=data_collator,
... train_dataset=encoded_train_dataset,
... eval_dataset=encoded_test_dataset,
... tokenizer=processor,
... )
>>> trainer.train()
```
To add the final model to 🤗 Hub, create a model card and call `push_to_hub`:
```py
>>> trainer.create_model_card()
>>> trainer.push_to_hub()
```
## Inference
Now that you have finetuned a LayoutLMv2 model, and uploaded it to the 🤗 Hub, you can use it for inference. The simplest
way to try out your finetuned model for inference is to use it in a [`Pipeline`].
Let's take an example:
```py
>>> example = dataset["test"][2]
>>> question = example["query"]["en"]
>>> image = example["image"]
>>> print(question)
>>> print(example["answers"])
'Who is ‘presiding’ TRRF GENERAL SESSION (PART 1)?'
['TRRF Vice President', 'lee a. waller']
```
Next, instantiate a pipeline for
document question answering with your model, and pass the image + question combination to it.
```py
>>> from transformers import pipeline
>>> qa_pipeline = pipeline("document-question-answering", model="MariaK/layoutlmv2-base-uncased_finetuned_docvqa")
>>> qa_pipeline(image, question)
[{'score': 0.9949808120727539,
'answer': 'Lee A. Waller',
'start': 55,
'end': 57}]
```
You can also manually replicate the results of the pipeline if you'd like:
1. Take an image and a question, prepare them for the model using the processor from your model.
2. Forward the result or preprocessing through the model.
3. The model returns `start_logits` and `end_logits`, which indicate which token is at the start of the answer and
which token is at the end of the answer. Both have shape (batch_size, sequence_length).
4. Take an argmax on the last dimension of both the `start_logits` and `end_logits` to get the predicted `start_idx` and `end_idx`.
5. Decode the answer with the tokenizer.
```py
>>> import torch
>>> from transformers import AutoProcessor
>>> from transformers import AutoModelForDocumentQuestionAnswering
>>> processor = AutoProcessor.from_pretrained("MariaK/layoutlmv2-base-uncased_finetuned_docvqa")
>>> model = AutoModelForDocumentQuestionAnswering.from_pretrained("MariaK/layoutlmv2-base-uncased_finetuned_docvqa")
>>> with torch.no_grad():
... encoding = processor(image.convert("RGB"), question, return_tensors="pt")
... outputs = model(**encoding)
... start_logits = outputs.start_logits
... end_logits = outputs.end_logits
... predicted_start_idx = start_logits.argmax(-1).item()
... predicted_end_idx = end_logits.argmax(-1).item()
>>> processor.tokenizer.decode(encoding.input_ids.squeeze()[predicted_start_idx : predicted_end_idx + 1])
'lee a. waller'
``` | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/video_classification.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Video classification
[[open-in-colab]]
Video classification is the task of assigning a label or class to an entire video. Videos are expected to have only one class for each video. Video classification models take a video as input and return a prediction about which class the video belongs to. These models can be used to categorize what a video is all about. A real-world application of video classification is action / activity recognition, which is useful for fitness applications. It is also helpful for vision-impaired individuals, especially when they are commuting.
This guide will show you how to:
1. Fine-tune [VideoMAE](https://huggingface.co/docs/transformers/main/en/model_doc/videomae) on a subset of the [UCF101](https://www.crcv.ucf.edu/data/UCF101.php) dataset.
2. Use your fine-tuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[TimeSformer](../model_doc/timesformer), [VideoMAE](../model_doc/videomae), [ViViT](../model_doc/vivit)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install -q pytorchvideo transformers evaluate
```
You will use [PyTorchVideo](https://pytorchvideo.org/) (dubbed `pytorchvideo`) to process and prepare the videos.
We encourage you to log in to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to log in:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load UCF101 dataset
Start by loading a subset of the [UCF-101 dataset](https://www.crcv.ucf.edu/data/UCF101.php). This will give you a chance to experiment and make sure everything works before spending more time training on the full dataset.
```py
>>> from huggingface_hub import hf_hub_download
>>> hf_dataset_identifier = "sayakpaul/ucf101-subset"
>>> filename = "UCF101_subset.tar.gz"
>>> file_path = hf_hub_download(repo_id=hf_dataset_identifier, filename=filename, repo_type="dataset")
```
After the subset has been downloaded, you need to extract the compressed archive:
```py
>>> import tarfile
>>> with tarfile.open(file_path) as t:
... t.extractall(".")
```
At a high level, the dataset is organized like so:
```bash
UCF101_subset/
train/
BandMarching/
video_1.mp4
video_2.mp4
...
Archery
video_1.mp4
video_2.mp4
...
...
val/
BandMarching/
video_1.mp4
video_2.mp4
...
Archery
video_1.mp4
video_2.mp4
...
...
test/
BandMarching/
video_1.mp4
video_2.mp4
...
Archery
video_1.mp4
video_2.mp4
...
...
```
The (`sorted`) video paths appear like so:
```bash
...
'UCF101_subset/train/ApplyEyeMakeup/v_ApplyEyeMakeup_g07_c04.avi',
'UCF101_subset/train/ApplyEyeMakeup/v_ApplyEyeMakeup_g07_c06.avi',
'UCF101_subset/train/ApplyEyeMakeup/v_ApplyEyeMakeup_g08_c01.avi',
'UCF101_subset/train/ApplyEyeMakeup/v_ApplyEyeMakeup_g09_c02.avi',
'UCF101_subset/train/ApplyEyeMakeup/v_ApplyEyeMakeup_g09_c06.avi'
...
```
You will notice that there are video clips belonging to the same group / scene where group is denoted by `g` in the video file paths. `v_ApplyEyeMakeup_g07_c04.avi` and `v_ApplyEyeMakeup_g07_c06.avi`, for example.
For the validation and evaluation splits, you wouldn't want to have video clips from the same group / scene to prevent [data leakage](https://www.kaggle.com/code/alexisbcook/data-leakage). The subset that you are using in this tutorial takes this information into account.
Next up, you will derive the set of labels present in the dataset. Also, create two dictionaries that'll be helpful when initializing the model:
* `label2id`: maps the class names to integers.
* `id2label`: maps the integers to class names.
```py
>>> class_labels = sorted({str(path).split("/")[2] for path in all_video_file_paths})
>>> label2id = {label: i for i, label in enumerate(class_labels)}
>>> id2label = {i: label for label, i in label2id.items()}
>>> print(f"Unique classes: {list(label2id.keys())}.")
# Unique classes: ['ApplyEyeMakeup', 'ApplyLipstick', 'Archery', 'BabyCrawling', 'BalanceBeam', 'BandMarching', 'BaseballPitch', 'Basketball', 'BasketballDunk', 'BenchPress'].
```
There are 10 unique classes. For each class, there are 30 videos in the training set.
## Load a model to fine-tune
Instantiate a video classification model from a pretrained checkpoint and its associated image processor. The model's encoder comes with pre-trained parameters, and the classification head is randomly initialized. The image processor will come in handy when writing the preprocessing pipeline for our dataset.
```py
>>> from transformers import VideoMAEImageProcessor, VideoMAEForVideoClassification
>>> model_ckpt = "MCG-NJU/videomae-base"
>>> image_processor = VideoMAEImageProcessor.from_pretrained(model_ckpt)
>>> model = VideoMAEForVideoClassification.from_pretrained(
... model_ckpt,
... label2id=label2id,
... id2label=id2label,
... ignore_mismatched_sizes=True, # provide this in case you're planning to fine-tune an already fine-tuned checkpoint
... )
```
While the model is loading, you might notice the following warning:
```bash
Some weights of the model checkpoint at MCG-NJU/videomae-base were not used when initializing VideoMAEForVideoClassification: [..., 'decoder.decoder_layers.1.attention.output.dense.bias', 'decoder.decoder_layers.2.attention.attention.key.weight']
- This IS expected if you are initializing VideoMAEForVideoClassification from the checkpoint of a model trained on another task or with another architecture (e.g. initializing a BertForSequenceClassification model from a BertForPreTraining model).
- This IS NOT expected if you are initializing VideoMAEForVideoClassification from the checkpoint of a model that you expect to be exactly identical (initializing a BertForSequenceClassification model from a BertForSequenceClassification model).
Some weights of VideoMAEForVideoClassification were not initialized from the model checkpoint at MCG-NJU/videomae-base and are newly initialized: ['classifier.bias', 'classifier.weight']
You should probably TRAIN this model on a down-stream task to be able to use it for predictions and inference.
```
The warning is telling us we are throwing away some weights (e.g. the weights and bias of the `classifier` layer) and randomly initializing some others (the weights and bias of a new `classifier` layer). This is expected in this case, because we are adding a new head for which we don't have pretrained weights, so the library warns us we should fine-tune this model before using it for inference, which is exactly what we are going to do.
**Note** that [this checkpoint](https://huggingface.co/MCG-NJU/videomae-base-finetuned-kinetics) leads to better performance on this task as the checkpoint was obtained fine-tuning on a similar downstream task having considerable domain overlap. You can check out [this checkpoint](https://huggingface.co/sayakpaul/videomae-base-finetuned-kinetics-finetuned-ucf101-subset) which was obtained by fine-tuning `MCG-NJU/videomae-base-finetuned-kinetics`.
## Prepare the datasets for training
For preprocessing the videos, you will leverage the [PyTorchVideo library](https://pytorchvideo.org/). Start by importing the dependencies we need.
```py
>>> import pytorchvideo.data
>>> from pytorchvideo.transforms import (
... ApplyTransformToKey,
... Normalize,
... RandomShortSideScale,
... RemoveKey,
... ShortSideScale,
... UniformTemporalSubsample,
... )
>>> from torchvision.transforms import (
... Compose,
... Lambda,
... RandomCrop,
... RandomHorizontalFlip,
... Resize,
... )
```
For the training dataset transformations, use a combination of uniform temporal subsampling, pixel normalization, random cropping, and random horizontal flipping. For the validation and evaluation dataset transformations, keep the same transformation chain except for random cropping and horizontal flipping. To learn more about the details of these transformations check out the [official documentation of PyTorchVideo](https://pytorchvideo.org).
Use the `image_processor` associated with the pre-trained model to obtain the following information:
* Image mean and standard deviation with which the video frame pixels will be normalized.
* Spatial resolution to which the video frames will be resized.
Start by defining some constants.
```py
>>> mean = image_processor.image_mean
>>> std = image_processor.image_std
>>> if "shortest_edge" in image_processor.size:
... height = width = image_processor.size["shortest_edge"]
>>> else:
... height = image_processor.size["height"]
... width = image_processor.size["width"]
>>> resize_to = (height, width)
>>> num_frames_to_sample = model.config.num_frames
>>> sample_rate = 4
>>> fps = 30
>>> clip_duration = num_frames_to_sample * sample_rate / fps
```
Now, define the dataset-specific transformations and the datasets respectively. Starting with the training set:
```py
>>> train_transform = Compose(
... [
... ApplyTransformToKey(
... key="video",
... transform=Compose(
... [
... UniformTemporalSubsample(num_frames_to_sample),
... Lambda(lambda x: x / 255.0),
... Normalize(mean, std),
... RandomShortSideScale(min_size=256, max_size=320),
... RandomCrop(resize_to),
... RandomHorizontalFlip(p=0.5),
... ]
... ),
... ),
... ]
... )
>>> train_dataset = pytorchvideo.data.Ucf101(
... data_path=os.path.join(dataset_root_path, "train"),
... clip_sampler=pytorchvideo.data.make_clip_sampler("random", clip_duration),
... decode_audio=False,
... transform=train_transform,
... )
```
The same sequence of workflow can be applied to the validation and evaluation sets:
```py
>>> val_transform = Compose(
... [
... ApplyTransformToKey(
... key="video",
... transform=Compose(
... [
... UniformTemporalSubsample(num_frames_to_sample),
... Lambda(lambda x: x / 255.0),
... Normalize(mean, std),
... Resize(resize_to),
... ]
... ),
... ),
... ]
... )
>>> val_dataset = pytorchvideo.data.Ucf101(
... data_path=os.path.join(dataset_root_path, "val"),
... clip_sampler=pytorchvideo.data.make_clip_sampler("uniform", clip_duration),
... decode_audio=False,
... transform=val_transform,
... )
>>> test_dataset = pytorchvideo.data.Ucf101(
... data_path=os.path.join(dataset_root_path, "test"),
... clip_sampler=pytorchvideo.data.make_clip_sampler("uniform", clip_duration),
... decode_audio=False,
... transform=val_transform,
... )
```
**Note**: The above dataset pipelines are taken from the [official PyTorchVideo example](https://pytorchvideo.org/docs/tutorial_classification#dataset). We're using the [`pytorchvideo.data.Ucf101()`](https://pytorchvideo.readthedocs.io/en/latest/api/data/data.html#pytorchvideo.data.Ucf101) function because it's tailored for the UCF-101 dataset. Under the hood, it returns a [`pytorchvideo.data.labeled_video_dataset.LabeledVideoDataset`](https://pytorchvideo.readthedocs.io/en/latest/api/data/data.html#pytorchvideo.data.LabeledVideoDataset) object. `LabeledVideoDataset` class is the base class for all things video in the PyTorchVideo dataset. So, if you want to use a custom dataset not supported off-the-shelf by PyTorchVideo, you can extend the `LabeledVideoDataset` class accordingly. Refer to the `data` API [documentation to](https://pytorchvideo.readthedocs.io/en/latest/api/data/data.html) learn more. Also, if your dataset follows a similar structure (as shown above), then using the `pytorchvideo.data.Ucf101()` should work just fine.
You can access the `num_videos` argument to know the number of videos in the dataset.
```py
>>> print(train_dataset.num_videos, val_dataset.num_videos, test_dataset.num_videos)
# (300, 30, 75)
```
## Visualize the preprocessed video for better debugging
```py
>>> import imageio
>>> import numpy as np
>>> from IPython.display import Image
>>> def unnormalize_img(img):
... """Un-normalizes the image pixels."""
... img = (img * std) + mean
... img = (img * 255).astype("uint8")
... return img.clip(0, 255)
>>> def create_gif(video_tensor, filename="sample.gif"):
... """Prepares a GIF from a video tensor.
...
... The video tensor is expected to have the following shape:
... (num_frames, num_channels, height, width).
... """
... frames = []
... for video_frame in video_tensor:
... frame_unnormalized = unnormalize_img(video_frame.permute(1, 2, 0).numpy())
... frames.append(frame_unnormalized)
... kargs = {"duration": 0.25}
... imageio.mimsave(filename, frames, "GIF", **kargs)
... return filename
>>> def display_gif(video_tensor, gif_name="sample.gif"):
... """Prepares and displays a GIF from a video tensor."""
... video_tensor = video_tensor.permute(1, 0, 2, 3)
... gif_filename = create_gif(video_tensor, gif_name)
... return Image(filename=gif_filename)
>>> sample_video = next(iter(train_dataset))
>>> video_tensor = sample_video["video"]
>>> display_gif(video_tensor)
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/sample_gif.gif" alt="Person playing basketball"/>
</div>
## Train the model
Leverage [`Trainer`](https://huggingface.co/docs/transformers/main_classes/trainer) from 🤗 Transformers for training the model. To instantiate a `Trainer`, you need to define the training configuration and an evaluation metric. The most important is the [`TrainingArguments`](https://huggingface.co/transformers/main_classes/trainer.html#transformers.TrainingArguments), which is a class that contains all the attributes to configure the training. It requires an output folder name, which will be used to save the checkpoints of the model. It also helps sync all the information in the model repository on 🤗 Hub.
Most of the training arguments are self-explanatory, but one that is quite important here is `remove_unused_columns=False`. This one will drop any features not used by the model's call function. By default it's `True` because usually it's ideal to drop unused feature columns, making it easier to unpack inputs into the model's call function. But, in this case, you need the unused features ('video' in particular) in order to create `pixel_values` (which is a mandatory key our model expects in its inputs).
```py
>>> from transformers import TrainingArguments, Trainer
>>> model_name = model_ckpt.split("/")[-1]
>>> new_model_name = f"{model_name}-finetuned-ucf101-subset"
>>> num_epochs = 4
>>> args = TrainingArguments(
... new_model_name,
... remove_unused_columns=False,
... evaluation_strategy="epoch",
... save_strategy="epoch",
... learning_rate=5e-5,
... per_device_train_batch_size=batch_size,
... per_device_eval_batch_size=batch_size,
... warmup_ratio=0.1,
... logging_steps=10,
... load_best_model_at_end=True,
... metric_for_best_model="accuracy",
... push_to_hub=True,
... max_steps=(train_dataset.num_videos // batch_size) * num_epochs,
... )
```
The dataset returned by `pytorchvideo.data.Ucf101()` doesn't implement the `__len__` method. As such, we must define `max_steps` when instantiating `TrainingArguments`.
Next, you need to define a function to compute the metrics from the predictions, which will use the `metric` you'll load now. The only preprocessing you have to do is to take the argmax of our predicted logits:
```py
import evaluate
metric = evaluate.load("accuracy")
def compute_metrics(eval_pred):
predictions = np.argmax(eval_pred.predictions, axis=1)
return metric.compute(predictions=predictions, references=eval_pred.label_ids)
```
**A note on evaluation**:
In the [VideoMAE paper](https://arxiv.org/abs/2203.12602), the authors use the following evaluation strategy. They evaluate the model on several clips from test videos and apply different crops to those clips and report the aggregate score. However, in the interest of simplicity and brevity, we don't consider that in this tutorial.
Also, define a `collate_fn`, which will be used to batch examples together. Each batch consists of 2 keys, namely `pixel_values` and `labels`.
```py
>>> def collate_fn(examples):
... # permute to (num_frames, num_channels, height, width)
... pixel_values = torch.stack(
... [example["video"].permute(1, 0, 2, 3) for example in examples]
... )
... labels = torch.tensor([example["label"] for example in examples])
... return {"pixel_values": pixel_values, "labels": labels}
```
Then you just pass all of this along with the datasets to `Trainer`:
```py
>>> trainer = Trainer(
... model,
... args,
... train_dataset=train_dataset,
... eval_dataset=val_dataset,
... tokenizer=image_processor,
... compute_metrics=compute_metrics,
... data_collator=collate_fn,
... )
```
You might wonder why you passed along the `image_processor` as a tokenizer when you preprocessed the data already. This is only to make sure the image processor configuration file (stored as JSON) will also be uploaded to the repo on the Hub.
Now fine-tune our model by calling the `train` method:
```py
>>> train_results = trainer.train()
```
Once training is completed, share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
## Inference
Great, now that you have fine-tuned a model, you can use it for inference!
Load a video for inference:
```py
>>> sample_test_video = next(iter(test_dataset))
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/sample_gif_two.gif" alt="Teams playing basketball"/>
</div>
The simplest way to try out your fine-tuned model for inference is to use it in a [`pipeline`](https://huggingface.co/docs/transformers/main/en/main_classes/pipelines#transformers.VideoClassificationPipeline). Instantiate a `pipeline` for video classification with your model, and pass your video to it:
```py
>>> from transformers import pipeline
>>> video_cls = pipeline(model="my_awesome_video_cls_model")
>>> video_cls("https://huggingface.co/datasets/sayakpaul/ucf101-subset/resolve/main/v_BasketballDunk_g14_c06.avi")
[{'score': 0.9272987842559814, 'label': 'BasketballDunk'},
{'score': 0.017777055501937866, 'label': 'BabyCrawling'},
{'score': 0.01663011871278286, 'label': 'BalanceBeam'},
{'score': 0.009560945443809032, 'label': 'BandMarching'},
{'score': 0.0068979403004050255, 'label': 'BaseballPitch'}]
```
You can also manually replicate the results of the `pipeline` if you'd like.
```py
>>> def run_inference(model, video):
... # (num_frames, num_channels, height, width)
... perumuted_sample_test_video = video.permute(1, 0, 2, 3)
... inputs = {
... "pixel_values": perumuted_sample_test_video.unsqueeze(0),
... "labels": torch.tensor(
... [sample_test_video["label"]]
... ), # this can be skipped if you don't have labels available.
... }
... device = torch.device("cuda" if torch.cuda.is_available() else "cpu")
... inputs = {k: v.to(device) for k, v in inputs.items()}
... model = model.to(device)
... # forward pass
... with torch.no_grad():
... outputs = model(**inputs)
... logits = outputs.logits
... return logits
```
Now, pass your input to the model and return the `logits`:
```
>>> logits = run_inference(trained_model, sample_test_video["video"])
```
Decoding the `logits`, we get:
```py
>>> predicted_class_idx = logits.argmax(-1).item()
>>> print("Predicted class:", model.config.id2label[predicted_class_idx])
# Predicted class: BasketballDunk
``` | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/text-to-speech.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Text to speech
[[open-in-colab]]
Text-to-speech (TTS) is the task of creating natural-sounding speech from text, where the speech can be generated in multiple
languages and for multiple speakers. Several text-to-speech models are currently available in 🤗 Transformers, such as
[Bark](../model_doc/bark), [MMS](../model_doc/mms), [VITS](../model_doc/vits) and [SpeechT5](../model_doc/speecht5).
You can easily generate audio using the `"text-to-audio"` pipeline (or its alias - `"text-to-speech"`). Some models, like Bark,
can also be conditioned to generate non-verbal communications such as laughing, sighing and crying, or even add music.
Here's an example of how you would use the `"text-to-speech"` pipeline with Bark:
```py
>>> from transformers import pipeline
>>> pipe = pipeline("text-to-speech", model="suno/bark-small")
>>> text = "[clears throat] This is a test ... and I just took a long pause."
>>> output = pipe(text)
```
Here's a code snippet you can use to listen to the resulting audio in a notebook:
```python
>>> from IPython.display import Audio
>>> Audio(output["audio"], rate=output["sampling_rate"])
```
For more examples on what Bark and other pretrained TTS models can do, refer to our
[Audio course](https://huggingface.co/learn/audio-course/chapter6/pre-trained_models).
If you are looking to fine-tune a TTS model, the only text-to-speech models currently available in 🤗 Transformers
are [SpeechT5](model_doc/speecht5) and [FastSpeech2Conformer](model_doc/fastspeech2_conformer), though more will be added in the future. SpeechT5 is pre-trained on a combination of speech-to-text and text-to-speech data, allowing it to learn a unified space of hidden representations shared by both text and speech. This means that the same pre-trained model can be fine-tuned for different tasks. Furthermore, SpeechT5 supports multiple speakers through x-vector speaker embeddings.
The remainder of this guide illustrates how to:
1. Fine-tune [SpeechT5](../model_doc/speecht5) that was originally trained on English speech on the Dutch (`nl`) language subset of the [VoxPopuli](https://huggingface.co/datasets/facebook/voxpopuli) dataset.
2. Use your refined model for inference in one of two ways: using a pipeline or directly.
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install datasets soundfile speechbrain accelerate
```
Install 🤗Transformers from source as not all the SpeechT5 features have been merged into an official release yet:
```bash
pip install git+https://github.com/huggingface/transformers.git
```
<Tip>
To follow this guide you will need a GPU. If you're working in a notebook, run the following line to check if a GPU is available:
```bash
!nvidia-smi
```
or alternatively for AMD GPUs:
```bash
!rocm-smi
```
</Tip>
We encourage you to log in to your Hugging Face account to upload and share your model with the community. When prompted, enter your token to log in:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load the dataset
[VoxPopuli](https://huggingface.co/datasets/facebook/voxpopuli) is a large-scale multilingual speech corpus consisting of
data sourced from 2009-2020 European Parliament event recordings. It contains labelled audio-transcription data for 15
European languages. In this guide, we are using the Dutch language subset, feel free to pick another subset.
Note that VoxPopuli or any other automated speech recognition (ASR) dataset may not be the most suitable
option for training TTS models. The features that make it beneficial for ASR, such as excessive background noise, are
typically undesirable in TTS. However, finding top-quality, multilingual, and multi-speaker TTS datasets can be quite
challenging.
Let's load the data:
```py
>>> from datasets import load_dataset, Audio
>>> dataset = load_dataset("facebook/voxpopuli", "nl", split="train")
>>> len(dataset)
20968
```
20968 examples should be sufficient for fine-tuning. SpeechT5 expects audio data to have a sampling rate of 16 kHz, so
make sure the examples in the dataset meet this requirement:
```py
dataset = dataset.cast_column("audio", Audio(sampling_rate=16000))
```
## Preprocess the data
Let's begin by defining the model checkpoint to use and loading the appropriate processor:
```py
>>> from transformers import SpeechT5Processor
>>> checkpoint = "microsoft/speecht5_tts"
>>> processor = SpeechT5Processor.from_pretrained(checkpoint)
```
### Text cleanup for SpeechT5 tokenization
Start by cleaning up the text data. You'll need the tokenizer part of the processor to process the text:
```py
>>> tokenizer = processor.tokenizer
```
The dataset examples contain `raw_text` and `normalized_text` features. When deciding which feature to use as the text input,
consider that the SpeechT5 tokenizer doesn't have any tokens for numbers. In `normalized_text` the numbers are written
out as text. Thus, it is a better fit, and we recommend using `normalized_text` as input text.
Because SpeechT5 was trained on the English language, it may not recognize certain characters in the Dutch dataset. If
left as is, these characters will be converted to `<unk>` tokens. However, in Dutch, certain characters like `à` are
used to stress syllables. In order to preserve the meaning of the text, we can replace this character with a regular `a`.
To identify unsupported tokens, extract all unique characters in the dataset using the `SpeechT5Tokenizer` which
works with characters as tokens. To do this, write the `extract_all_chars` mapping function that concatenates
the transcriptions from all examples into one string and converts it to a set of characters.
Make sure to set `batched=True` and `batch_size=-1` in `dataset.map()` so that all transcriptions are available at once for
the mapping function.
```py
>>> def extract_all_chars(batch):
... all_text = " ".join(batch["normalized_text"])
... vocab = list(set(all_text))
... return {"vocab": [vocab], "all_text": [all_text]}
>>> vocabs = dataset.map(
... extract_all_chars,
... batched=True,
... batch_size=-1,
... keep_in_memory=True,
... remove_columns=dataset.column_names,
... )
>>> dataset_vocab = set(vocabs["vocab"][0])
>>> tokenizer_vocab = {k for k, _ in tokenizer.get_vocab().items()}
```
Now you have two sets of characters: one with the vocabulary from the dataset and one with the vocabulary from the tokenizer.
To identify any unsupported characters in the dataset, you can take the difference between these two sets. The resulting
set will contain the characters that are in the dataset but not in the tokenizer.
```py
>>> dataset_vocab - tokenizer_vocab
{' ', 'à', 'ç', 'è', 'ë', 'í', 'ï', 'ö', 'ü'}
```
To handle the unsupported characters identified in the previous step, define a function that maps these characters to
valid tokens. Note that spaces are already replaced by `▁` in the tokenizer and don't need to be handled separately.
```py
>>> replacements = [
... ("à", "a"),
... ("ç", "c"),
... ("è", "e"),
... ("ë", "e"),
... ("í", "i"),
... ("ï", "i"),
... ("ö", "o"),
... ("ü", "u"),
... ]
>>> def cleanup_text(inputs):
... for src, dst in replacements:
... inputs["normalized_text"] = inputs["normalized_text"].replace(src, dst)
... return inputs
>>> dataset = dataset.map(cleanup_text)
```
Now that you have dealt with special characters in the text, it's time to shift focus to the audio data.
### Speakers
The VoxPopuli dataset includes speech from multiple speakers, but how many speakers are represented in the dataset? To
determine this, we can count the number of unique speakers and the number of examples each speaker contributes to the dataset.
With a total of 20,968 examples in the dataset, this information will give us a better understanding of the distribution of
speakers and examples in the data.
```py
>>> from collections import defaultdict
>>> speaker_counts = defaultdict(int)
>>> for speaker_id in dataset["speaker_id"]:
... speaker_counts[speaker_id] += 1
```
By plotting a histogram you can get a sense of how much data there is for each speaker.
```py
>>> import matplotlib.pyplot as plt
>>> plt.figure()
>>> plt.hist(speaker_counts.values(), bins=20)
>>> plt.ylabel("Speakers")
>>> plt.xlabel("Examples")
>>> plt.show()
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/tts_speakers_histogram.png" alt="Speakers histogram"/>
</div>
The histogram reveals that approximately one-third of the speakers in the dataset have fewer than 100 examples, while
around ten speakers have more than 500 examples. To improve training efficiency and balance the dataset, we can limit
the data to speakers with between 100 and 400 examples.
```py
>>> def select_speaker(speaker_id):
... return 100 <= speaker_counts[speaker_id] <= 400
>>> dataset = dataset.filter(select_speaker, input_columns=["speaker_id"])
```
Let's check how many speakers remain:
```py
>>> len(set(dataset["speaker_id"]))
42
```
Let's see how many examples are left:
```py
>>> len(dataset)
9973
```
You are left with just under 10,000 examples from approximately 40 unique speakers, which should be sufficient.
Note that some speakers with few examples may actually have more audio available if the examples are long. However,
determining the total amount of audio for each speaker requires scanning through the entire dataset, which is a
time-consuming process that involves loading and decoding each audio file. As such, we have chosen to skip this step here.
### Speaker embeddings
To enable the TTS model to differentiate between multiple speakers, you'll need to create a speaker embedding for each example.
The speaker embedding is an additional input into the model that captures a particular speaker's voice characteristics.
To generate these speaker embeddings, use the pre-trained [spkrec-xvect-voxceleb](https://huggingface.co/speechbrain/spkrec-xvect-voxceleb)
model from SpeechBrain.
Create a function `create_speaker_embedding()` that takes an input audio waveform and outputs a 512-element vector
containing the corresponding speaker embedding.
```py
>>> import os
>>> import torch
>>> from speechbrain.pretrained import EncoderClassifier
>>> spk_model_name = "speechbrain/spkrec-xvect-voxceleb"
>>> device = "cuda" if torch.cuda.is_available() else "cpu"
>>> speaker_model = EncoderClassifier.from_hparams(
... source=spk_model_name,
... run_opts={"device": device},
... savedir=os.path.join("/tmp", spk_model_name),
... )
>>> def create_speaker_embedding(waveform):
... with torch.no_grad():
... speaker_embeddings = speaker_model.encode_batch(torch.tensor(waveform))
... speaker_embeddings = torch.nn.functional.normalize(speaker_embeddings, dim=2)
... speaker_embeddings = speaker_embeddings.squeeze().cpu().numpy()
... return speaker_embeddings
```
It's important to note that the `speechbrain/spkrec-xvect-voxceleb` model was trained on English speech from the VoxCeleb
dataset, whereas the training examples in this guide are in Dutch. While we believe that this model will still generate
reasonable speaker embeddings for our Dutch dataset, this assumption may not hold true in all cases.
For optimal results, we recommend training an X-vector model on the target speech first. This will ensure that the model
is better able to capture the unique voice characteristics present in the Dutch language.
### Processing the dataset
Finally, let's process the data into the format the model expects. Create a `prepare_dataset` function that takes in a
single example and uses the `SpeechT5Processor` object to tokenize the input text and load the target audio into a log-mel spectrogram.
It should also add the speaker embeddings as an additional input.
```py
>>> def prepare_dataset(example):
... audio = example["audio"]
... example = processor(
... text=example["normalized_text"],
... audio_target=audio["array"],
... sampling_rate=audio["sampling_rate"],
... return_attention_mask=False,
... )
... # strip off the batch dimension
... example["labels"] = example["labels"][0]
... # use SpeechBrain to obtain x-vector
... example["speaker_embeddings"] = create_speaker_embedding(audio["array"])
... return example
```
Verify the processing is correct by looking at a single example:
```py
>>> processed_example = prepare_dataset(dataset[0])
>>> list(processed_example.keys())
['input_ids', 'labels', 'stop_labels', 'speaker_embeddings']
```
Speaker embeddings should be a 512-element vector:
```py
>>> processed_example["speaker_embeddings"].shape
(512,)
```
The labels should be a log-mel spectrogram with 80 mel bins.
```py
>>> import matplotlib.pyplot as plt
>>> plt.figure()
>>> plt.imshow(processed_example["labels"].T)
>>> plt.show()
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/tts_logmelspectrogram_1.png" alt="Log-mel spectrogram with 80 mel bins"/>
</div>
Side note: If you find this spectrogram confusing, it may be due to your familiarity with the convention of placing low frequencies
at the bottom and high frequencies at the top of a plot. However, when plotting spectrograms as an image using the matplotlib library,
the y-axis is flipped and the spectrograms appear upside down.
Now apply the processing function to the entire dataset. This will take between 5 and 10 minutes.
```py
>>> dataset = dataset.map(prepare_dataset, remove_columns=dataset.column_names)
```
You'll see a warning saying that some examples in the dataset are longer than the maximum input length the model can handle (600 tokens).
Remove those examples from the dataset. Here we go even further and to allow for larger batch sizes we remove anything over 200 tokens.
```py
>>> def is_not_too_long(input_ids):
... input_length = len(input_ids)
... return input_length < 200
>>> dataset = dataset.filter(is_not_too_long, input_columns=["input_ids"])
>>> len(dataset)
8259
```
Next, create a basic train/test split:
```py
>>> dataset = dataset.train_test_split(test_size=0.1)
```
### Data collator
In order to combine multiple examples into a batch, you need to define a custom data collator. This collator will pad shorter sequences with padding
tokens, ensuring that all examples have the same length. For the spectrogram labels, the padded portions are replaced with the special value `-100`. This special value
instructs the model to ignore that part of the spectrogram when calculating the spectrogram loss.
```py
>>> from dataclasses import dataclass
>>> from typing import Any, Dict, List, Union
>>> @dataclass
... class TTSDataCollatorWithPadding:
... processor: Any
... def __call__(self, features: List[Dict[str, Union[List[int], torch.Tensor]]]) -> Dict[str, torch.Tensor]:
... input_ids = [{"input_ids": feature["input_ids"]} for feature in features]
... label_features = [{"input_values": feature["labels"]} for feature in features]
... speaker_features = [feature["speaker_embeddings"] for feature in features]
... # collate the inputs and targets into a batch
... batch = processor.pad(input_ids=input_ids, labels=label_features, return_tensors="pt")
... # replace padding with -100 to ignore loss correctly
... batch["labels"] = batch["labels"].masked_fill(batch.decoder_attention_mask.unsqueeze(-1).ne(1), -100)
... # not used during fine-tuning
... del batch["decoder_attention_mask"]
... # round down target lengths to multiple of reduction factor
... if model.config.reduction_factor > 1:
... target_lengths = torch.tensor([len(feature["input_values"]) for feature in label_features])
... target_lengths = target_lengths.new(
... [length - length % model.config.reduction_factor for length in target_lengths]
... )
... max_length = max(target_lengths)
... batch["labels"] = batch["labels"][:, :max_length]
... # also add in the speaker embeddings
... batch["speaker_embeddings"] = torch.tensor(speaker_features)
... return batch
```
In SpeechT5, the input to the decoder part of the model is reduced by a factor 2. In other words, it throws away every
other timestep from the target sequence. The decoder then predicts a sequence that is twice as long. Since the original
target sequence length may be odd, the data collator makes sure to round the maximum length of the batch down to be a
multiple of 2.
```py
>>> data_collator = TTSDataCollatorWithPadding(processor=processor)
```
## Train the model
Load the pre-trained model from the same checkpoint as you used for loading the processor:
```py
>>> from transformers import SpeechT5ForTextToSpeech
>>> model = SpeechT5ForTextToSpeech.from_pretrained(checkpoint)
```
The `use_cache=True` option is incompatible with gradient checkpointing. Disable it for training.
```py
>>> model.config.use_cache = False
```
Define the training arguments. Here we are not computing any evaluation metrics during the training process. Instead, we'll
only look at the loss:
```python
>>> from transformers import Seq2SeqTrainingArguments
>>> training_args = Seq2SeqTrainingArguments(
... output_dir="speecht5_finetuned_voxpopuli_nl", # change to a repo name of your choice
... per_device_train_batch_size=4,
... gradient_accumulation_steps=8,
... learning_rate=1e-5,
... warmup_steps=500,
... max_steps=4000,
... gradient_checkpointing=True,
... fp16=True,
... evaluation_strategy="steps",
... per_device_eval_batch_size=2,
... save_steps=1000,
... eval_steps=1000,
... logging_steps=25,
... report_to=["tensorboard"],
... load_best_model_at_end=True,
... greater_is_better=False,
... label_names=["labels"],
... push_to_hub=True,
... )
```
Instantiate the `Trainer` object and pass the model, dataset, and data collator to it.
```py
>>> from transformers import Seq2SeqTrainer
>>> trainer = Seq2SeqTrainer(
... args=training_args,
... model=model,
... train_dataset=dataset["train"],
... eval_dataset=dataset["test"],
... data_collator=data_collator,
... tokenizer=processor,
... )
```
And with that, you're ready to start training! Training will take several hours. Depending on your GPU,
it is possible that you will encounter a CUDA "out-of-memory" error when you start training. In this case, you can reduce
the `per_device_train_batch_size` incrementally by factors of 2 and increase `gradient_accumulation_steps` by 2x to compensate.
```py
>>> trainer.train()
```
To be able to use your checkpoint with a pipeline, make sure to save the processor with the checkpoint:
```py
>>> processor.save_pretrained("YOUR_ACCOUNT_NAME/speecht5_finetuned_voxpopuli_nl")
```
Push the final model to the 🤗 Hub:
```py
>>> trainer.push_to_hub()
```
## Inference
### Inference with a pipeline
Great, now that you've fine-tuned a model, you can use it for inference!
First, let's see how you can use it with a corresponding pipeline. Let's create a `"text-to-speech"` pipeline with your
checkpoint:
```py
>>> from transformers import pipeline
>>> pipe = pipeline("text-to-speech", model="YOUR_ACCOUNT_NAME/speecht5_finetuned_voxpopuli_nl")
```
Pick a piece of text in Dutch you'd like narrated, e.g.:
```py
>>> text = "hallo allemaal, ik praat nederlands. groetjes aan iedereen!"
```
To use SpeechT5 with the pipeline, you'll need a speaker embedding. Let's get it from an example in the test dataset:
```py
>>> example = dataset["test"][304]
>>> speaker_embeddings = torch.tensor(example["speaker_embeddings"]).unsqueeze(0)
```
Now you can pass the text and speaker embeddings to the pipeline, and it will take care of the rest:
```py
>>> forward_params = {"speaker_embeddings": speaker_embeddings}
>>> output = pipe(text, forward_params=forward_params)
>>> output
{'audio': array([-6.82714235e-05, -4.26525949e-04, 1.06134125e-04, ...,
-1.22392643e-03, -7.76011671e-04, 3.29112721e-04], dtype=float32),
'sampling_rate': 16000}
```
You can then listen to the result:
```py
>>> from IPython.display import Audio
>>> Audio(output['audio'], rate=output['sampling_rate'])
```
### Run inference manually
You can achieve the same inference results without using the pipeline, however, more steps will be required.
Load the model from the 🤗 Hub:
```py
>>> model = SpeechT5ForTextToSpeech.from_pretrained("YOUR_ACCOUNT/speecht5_finetuned_voxpopuli_nl")
```
Pick an example from the test dataset obtain a speaker embedding.
```py
>>> example = dataset["test"][304]
>>> speaker_embeddings = torch.tensor(example["speaker_embeddings"]).unsqueeze(0)
```
Define the input text and tokenize it.
```py
>>> text = "hallo allemaal, ik praat nederlands. groetjes aan iedereen!"
>>> inputs = processor(text=text, return_tensors="pt")
```
Create a spectrogram with your model:
```py
>>> spectrogram = model.generate_speech(inputs["input_ids"], speaker_embeddings)
```
Visualize the spectrogram, if you'd like to:
```py
>>> plt.figure()
>>> plt.imshow(spectrogram.T)
>>> plt.show()
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/tts_logmelspectrogram_2.png" alt="Generated log-mel spectrogram"/>
</div>
Finally, use the vocoder to turn the spectrogram into sound.
```py
>>> with torch.no_grad():
... speech = vocoder(spectrogram)
>>> from IPython.display import Audio
>>> Audio(speech.numpy(), rate=16000)
```
In our experience, obtaining satisfactory results from this model can be challenging. The quality of the speaker
embeddings appears to be a significant factor. Since SpeechT5 was pre-trained with English x-vectors, it performs best
when using English speaker embeddings. If the synthesized speech sounds poor, try using a different speaker embedding.
Increasing the training duration is also likely to enhance the quality of the results. Even so, the speech clearly is Dutch instead of English, and it does
capture the voice characteristics of the speaker (compare to the original audio in the example).
Another thing to experiment with is the model's configuration. For example, try using `config.reduction_factor = 1` to
see if this improves the results.
Finally, it is essential to consider ethical considerations. Although TTS technology has numerous useful applications, it
may also be used for malicious purposes, such as impersonating someone's voice without their knowledge or consent. Please
use TTS judiciously and responsibly.
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/semantic_segmentation.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Image Segmentation
[[open-in-colab]]
<Youtube id="dKE8SIt9C-w"/>
Image segmentation models separate areas corresponding to different areas of interest in an image. These models work by assigning a label to each pixel. There are several types of segmentation: semantic segmentation, instance segmentation, and panoptic segmentation.
In this guide, we will:
1. [Take a look at different types of segmentation](#types-of-segmentation).
2. [Have an end-to-end fine-tuning example for semantic segmentation](#fine-tuning-a-model-for-segmentation).
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install -q datasets transformers evaluate
```
We encourage you to log in to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to log in:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Types of Segmentation
Semantic segmentation assigns a label or class to every single pixel in an image. Let's take a look at a semantic segmentation model output. It will assign the same class to every instance of an object it comes across in an image, for example, all cats will be labeled as "cat" instead of "cat-1", "cat-2".
We can use transformers' image segmentation pipeline to quickly infer a semantic segmentation model. Let's take a look at the example image.
```python
from transformers import pipeline
from PIL import Image
import requests
url = "https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/segmentation_input.jpg"
image = Image.open(requests.get(url, stream=True).raw)
image
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/segmentation_input.jpg" alt="Segmentation Input"/>
</div>
We will use [nvidia/segformer-b1-finetuned-cityscapes-1024-1024](https://huggingface.co/nvidia/segformer-b1-finetuned-cityscapes-1024-1024).
```python
semantic_segmentation = pipeline("image-segmentation", "nvidia/segformer-b1-finetuned-cityscapes-1024-1024")
results = semantic_segmentation(image)
results
```
The segmentation pipeline output includes a mask for every predicted class.
```bash
[{'score': None,
'label': 'road',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': None,
'label': 'sidewalk',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': None,
'label': 'building',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': None,
'label': 'wall',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': None,
'label': 'pole',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': None,
'label': 'traffic sign',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': None,
'label': 'vegetation',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': None,
'label': 'terrain',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': None,
'label': 'sky',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': None,
'label': 'car',
'mask': <PIL.Image.Image image mode=L size=612x415>}]
```
Taking a look at the mask for the car class, we can see every car is classified with the same mask.
```python
results[-1]["mask"]
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/semantic_segmentation_output.png" alt="Semantic Segmentation Output"/>
</div>
In instance segmentation, the goal is not to classify every pixel, but to predict a mask for **every instance of an object** in a given image. It works very similar to object detection, where there is a bounding box for every instance, there's a segmentation mask instead. We will use [facebook/mask2former-swin-large-cityscapes-instance](https://huggingface.co/facebook/mask2former-swin-large-cityscapes-instance) for this.
```python
instance_segmentation = pipeline("image-segmentation", "facebook/mask2former-swin-large-cityscapes-instance")
results = instance_segmentation(Image.open(image))
results
```
As you can see below, there are multiple cars classified, and there's no classification for pixels other than pixels that belong to car and person instances.
```bash
[{'score': 0.999944,
'label': 'car',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': 0.999945,
'label': 'car',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': 0.999652,
'label': 'car',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': 0.903529,
'label': 'person',
'mask': <PIL.Image.Image image mode=L size=612x415>}]
```
Checking out one of the car masks below.
```python
results[2]["mask"]
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/instance_segmentation_output.png" alt="Semantic Segmentation Output"/>
</div>
Panoptic segmentation combines semantic segmentation and instance segmentation, where every pixel is classified into a class and an instance of that class, and there are multiple masks for each instance of a class. We can use [facebook/mask2former-swin-large-cityscapes-panoptic](https://huggingface.co/facebook/mask2former-swin-large-cityscapes-panoptic) for this.
```python
panoptic_segmentation = pipeline("image-segmentation", "facebook/mask2former-swin-large-cityscapes-panoptic")
results = panoptic_segmentation(Image.open(image))
results
```
As you can see below, we have more classes. We will later illustrate to see that every pixel is classified into one of the classes.
```bash
[{'score': 0.999981,
'label': 'car',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': 0.999958,
'label': 'car',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': 0.99997,
'label': 'vegetation',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': 0.999575,
'label': 'pole',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': 0.999958,
'label': 'building',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': 0.999634,
'label': 'road',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': 0.996092,
'label': 'sidewalk',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': 0.999221,
'label': 'car',
'mask': <PIL.Image.Image image mode=L size=612x415>},
{'score': 0.99987,
'label': 'sky',
'mask': <PIL.Image.Image image mode=L size=612x415>}]
```
Let's have a side by side comparison for all types of segmentation.
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/segmentation-comparison.png" alt="Segmentation Maps Compared"/>
</div>
Seeing all types of segmentation, let's have a deep dive on fine-tuning a model for semantic segmentation.
Common real-world applications of semantic segmentation include training self-driving cars to identify pedestrians and important traffic information, identifying cells and abnormalities in medical imagery, and monitoring environmental changes from satellite imagery.
## Fine-tuning a Model for Segmentation
We will now:
1. Finetune [SegFormer](https://huggingface.co/docs/transformers/main/en/model_doc/segformer#segformer) on the [SceneParse150](https://huggingface.co/datasets/scene_parse_150) dataset.
2. Use your fine-tuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[BEiT](../model_doc/beit), [Data2VecVision](../model_doc/data2vec-vision), [DPT](../model_doc/dpt), [MobileNetV2](../model_doc/mobilenet_v2), [MobileViT](../model_doc/mobilevit), [MobileViTV2](../model_doc/mobilevitv2), [SegFormer](../model_doc/segformer), [UPerNet](../model_doc/upernet)
<!--End of the generated tip-->
</Tip>
### Load SceneParse150 dataset
Start by loading a smaller subset of the SceneParse150 dataset from the 🤗 Datasets library. This'll give you a chance to experiment and make sure everything works before spending more time training on the full dataset.
```py
>>> from datasets import load_dataset
>>> ds = load_dataset("scene_parse_150", split="train[:50]")
```
Split the dataset's `train` split into a train and test set with the [`~datasets.Dataset.train_test_split`] method:
```py
>>> ds = ds.train_test_split(test_size=0.2)
>>> train_ds = ds["train"]
>>> test_ds = ds["test"]
```
Then take a look at an example:
```py
>>> train_ds[0]
{'image': <PIL.JpegImagePlugin.JpegImageFile image mode=RGB size=512x683 at 0x7F9B0C201F90>,
'annotation': <PIL.PngImagePlugin.PngImageFile image mode=L size=512x683 at 0x7F9B0C201DD0>,
'scene_category': 368}
```
- `image`: a PIL image of the scene.
- `annotation`: a PIL image of the segmentation map, which is also the model's target.
- `scene_category`: a category id that describes the image scene like "kitchen" or "office". In this guide, you'll only need `image` and `annotation`, both of which are PIL images.
You'll also want to create a dictionary that maps a label id to a label class which will be useful when you set up the model later. Download the mappings from the Hub and create the `id2label` and `label2id` dictionaries:
```py
>>> import json
>>> from huggingface_hub import cached_download, hf_hub_url
>>> repo_id = "huggingface/label-files"
>>> filename = "ade20k-id2label.json"
>>> id2label = json.load(open(cached_download(hf_hub_url(repo_id, filename, repo_type="dataset")), "r"))
>>> id2label = {int(k): v for k, v in id2label.items()}
>>> label2id = {v: k for k, v in id2label.items()}
>>> num_labels = len(id2label)
```
#### Custom dataset
You could also create and use your own dataset if you prefer to train with the [run_semantic_segmentation.py](https://github.com/huggingface/transformers/blob/main/examples/pytorch/semantic-segmentation/run_semantic_segmentation.py) script instead of a notebook instance. The script requires:
1. a [`~datasets.DatasetDict`] with two [`~datasets.Image`] columns, "image" and "label"
```py
from datasets import Dataset, DatasetDict, Image
image_paths_train = ["path/to/image_1.jpg/jpg", "path/to/image_2.jpg/jpg", ..., "path/to/image_n.jpg/jpg"]
label_paths_train = ["path/to/annotation_1.png", "path/to/annotation_2.png", ..., "path/to/annotation_n.png"]
image_paths_validation = [...]
label_paths_validation = [...]
def create_dataset(image_paths, label_paths):
dataset = Dataset.from_dict({"image": sorted(image_paths),
"label": sorted(label_paths)})
dataset = dataset.cast_column("image", Image())
dataset = dataset.cast_column("label", Image())
return dataset
# step 1: create Dataset objects
train_dataset = create_dataset(image_paths_train, label_paths_train)
validation_dataset = create_dataset(image_paths_validation, label_paths_validation)
# step 2: create DatasetDict
dataset = DatasetDict({
"train": train_dataset,
"validation": validation_dataset,
}
)
# step 3: push to Hub (assumes you have ran the huggingface-cli login command in a terminal/notebook)
dataset.push_to_hub("your-name/dataset-repo")
# optionally, you can push to a private repo on the Hub
# dataset.push_to_hub("name of repo on the hub", private=True)
```
2. an id2label dictionary mapping the class integers to their class names
```py
import json
# simple example
id2label = {0: 'cat', 1: 'dog'}
with open('id2label.json', 'w') as fp:
json.dump(id2label, fp)
```
As an example, take a look at this [example dataset](https://huggingface.co/datasets/nielsr/ade20k-demo) which was created with the steps shown above.
### Preprocess
The next step is to load a SegFormer image processor to prepare the images and annotations for the model. Some datasets, like this one, use the zero-index as the background class. However, the background class isn't actually included in the 150 classes, so you'll need to set `reduce_labels=True` to subtract one from all the labels. The zero-index is replaced by `255` so it's ignored by SegFormer's loss function:
```py
>>> from transformers import AutoImageProcessor
>>> checkpoint = "nvidia/mit-b0"
>>> image_processor = AutoImageProcessor.from_pretrained(checkpoint, reduce_labels=True)
```
<frameworkcontent>
<pt>
It is common to apply some data augmentations to an image dataset to make a model more robust against overfitting. In this guide, you'll use the [`ColorJitter`](https://pytorch.org/vision/stable/generated/torchvision.transforms.ColorJitter.html) function from [torchvision](https://pytorch.org/vision/stable/index.html) to randomly change the color properties of an image, but you can also use any image library you like.
```py
>>> from torchvision.transforms import ColorJitter
>>> jitter = ColorJitter(brightness=0.25, contrast=0.25, saturation=0.25, hue=0.1)
```
Now create two preprocessing functions to prepare the images and annotations for the model. These functions convert the images into `pixel_values` and annotations to `labels`. For the training set, `jitter` is applied before providing the images to the image processor. For the test set, the image processor crops and normalizes the `images`, and only crops the `labels` because no data augmentation is applied during testing.
```py
>>> def train_transforms(example_batch):
... images = [jitter(x) for x in example_batch["image"]]
... labels = [x for x in example_batch["annotation"]]
... inputs = image_processor(images, labels)
... return inputs
>>> def val_transforms(example_batch):
... images = [x for x in example_batch["image"]]
... labels = [x for x in example_batch["annotation"]]
... inputs = image_processor(images, labels)
... return inputs
```
To apply the `jitter` over the entire dataset, use the 🤗 Datasets [`~datasets.Dataset.set_transform`] function. The transform is applied on the fly which is faster and consumes less disk space:
```py
>>> train_ds.set_transform(train_transforms)
>>> test_ds.set_transform(val_transforms)
```
</pt>
</frameworkcontent>
<frameworkcontent>
<tf>
It is common to apply some data augmentations to an image dataset to make a model more robust against overfitting.
In this guide, you'll use [`tf.image`](https://www.tensorflow.org/api_docs/python/tf/image) to randomly change the color properties of an image, but you can also use any image
library you like.
Define two separate transformation functions:
- training data transformations that include image augmentation
- validation data transformations that only transpose the images, since computer vision models in 🤗 Transformers expect channels-first layout
```py
>>> import tensorflow as tf
>>> def aug_transforms(image):
... image = tf.keras.utils.img_to_array(image)
... image = tf.image.random_brightness(image, 0.25)
... image = tf.image.random_contrast(image, 0.5, 2.0)
... image = tf.image.random_saturation(image, 0.75, 1.25)
... image = tf.image.random_hue(image, 0.1)
... image = tf.transpose(image, (2, 0, 1))
... return image
>>> def transforms(image):
... image = tf.keras.utils.img_to_array(image)
... image = tf.transpose(image, (2, 0, 1))
... return image
```
Next, create two preprocessing functions to prepare batches of images and annotations for the model. These functions apply
the image transformations and use the earlier loaded `image_processor` to convert the images into `pixel_values` and
annotations to `labels`. `ImageProcessor` also takes care of resizing and normalizing the images.
```py
>>> def train_transforms(example_batch):
... images = [aug_transforms(x.convert("RGB")) for x in example_batch["image"]]
... labels = [x for x in example_batch["annotation"]]
... inputs = image_processor(images, labels)
... return inputs
>>> def val_transforms(example_batch):
... images = [transforms(x.convert("RGB")) for x in example_batch["image"]]
... labels = [x for x in example_batch["annotation"]]
... inputs = image_processor(images, labels)
... return inputs
```
To apply the preprocessing transformations over the entire dataset, use the 🤗 Datasets [`~datasets.Dataset.set_transform`] function.
The transform is applied on the fly which is faster and consumes less disk space:
```py
>>> train_ds.set_transform(train_transforms)
>>> test_ds.set_transform(val_transforms)
```
</tf>
</frameworkcontent>
### Evaluate
Including a metric during training is often helpful for evaluating your model's performance. You can quickly load an evaluation method with the 🤗 [Evaluate](https://huggingface.co/docs/evaluate/index) library. For this task, load the [mean Intersection over Union](https://huggingface.co/spaces/evaluate-metric/accuracy) (IoU) metric (see the 🤗 Evaluate [quick tour](https://huggingface.co/docs/evaluate/a_quick_tour) to learn more about how to load and compute a metric):
```py
>>> import evaluate
>>> metric = evaluate.load("mean_iou")
```
Then create a function to [`~evaluate.EvaluationModule.compute`] the metrics. Your predictions need to be converted to
logits first, and then reshaped to match the size of the labels before you can call [`~evaluate.EvaluationModule.compute`]:
<frameworkcontent>
<pt>
```py
>>> import numpy as np
>>> import torch
>>> from torch import nn
>>> def compute_metrics(eval_pred):
... with torch.no_grad():
... logits, labels = eval_pred
... logits_tensor = torch.from_numpy(logits)
... logits_tensor = nn.functional.interpolate(
... logits_tensor,
... size=labels.shape[-2:],
... mode="bilinear",
... align_corners=False,
... ).argmax(dim=1)
... pred_labels = logits_tensor.detach().cpu().numpy()
... metrics = metric.compute(
... predictions=pred_labels,
... references=labels,
... num_labels=num_labels,
... ignore_index=255,
... reduce_labels=False,
... )
... for key, value in metrics.items():
... if isinstance(value, np.ndarray):
... metrics[key] = value.tolist()
... return metrics
```
</pt>
</frameworkcontent>
<frameworkcontent>
<tf>
```py
>>> def compute_metrics(eval_pred):
... logits, labels = eval_pred
... logits = tf.transpose(logits, perm=[0, 2, 3, 1])
... logits_resized = tf.image.resize(
... logits,
... size=tf.shape(labels)[1:],
... method="bilinear",
... )
... pred_labels = tf.argmax(logits_resized, axis=-1)
... metrics = metric.compute(
... predictions=pred_labels,
... references=labels,
... num_labels=num_labels,
... ignore_index=-1,
... reduce_labels=image_processor.do_reduce_labels,
... )
... per_category_accuracy = metrics.pop("per_category_accuracy").tolist()
... per_category_iou = metrics.pop("per_category_iou").tolist()
... metrics.update({f"accuracy_{id2label[i]}": v for i, v in enumerate(per_category_accuracy)})
... metrics.update({f"iou_{id2label[i]}": v for i, v in enumerate(per_category_iou)})
... return {"val_" + k: v for k, v in metrics.items()}
```
</tf>
</frameworkcontent>
Your `compute_metrics` function is ready to go now, and you'll return to it when you setup your training.
### Train
<frameworkcontent>
<pt>
<Tip>
If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the basic tutorial [here](../training#finetune-with-trainer)!
</Tip>
You're ready to start training your model now! Load SegFormer with [`AutoModelForSemanticSegmentation`], and pass the model the mapping between label ids and label classes:
```py
>>> from transformers import AutoModelForSemanticSegmentation, TrainingArguments, Trainer
>>> model = AutoModelForSemanticSegmentation.from_pretrained(checkpoint, id2label=id2label, label2id=label2id)
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`TrainingArguments`]. It is important you don't remove unused columns because this'll drop the `image` column. Without the `image` column, you can't create `pixel_values`. Set `remove_unused_columns=False` to prevent this behavior! The only other required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model). At the end of each epoch, the [`Trainer`] will evaluate the IoU metric and save the training checkpoint.
2. Pass the training arguments to [`Trainer`] along with the model, dataset, tokenizer, data collator, and `compute_metrics` function.
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> training_args = TrainingArguments(
... output_dir="segformer-b0-scene-parse-150",
... learning_rate=6e-5,
... num_train_epochs=50,
... per_device_train_batch_size=2,
... per_device_eval_batch_size=2,
... save_total_limit=3,
... evaluation_strategy="steps",
... save_strategy="steps",
... save_steps=20,
... eval_steps=20,
... logging_steps=1,
... eval_accumulation_steps=5,
... remove_unused_columns=False,
... push_to_hub=True,
... )
>>> trainer = Trainer(
... model=model,
... args=training_args,
... train_dataset=train_ds,
... eval_dataset=test_ds,
... compute_metrics=compute_metrics,
... )
>>> trainer.train()
```
Once training is completed, share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
</pt>
</frameworkcontent>
<frameworkcontent>
<tf>
<Tip>
If you are unfamiliar with fine-tuning a model with Keras, check out the [basic tutorial](./training#train-a-tensorflow-model-with-keras) first!
</Tip>
To fine-tune a model in TensorFlow, follow these steps:
1. Define the training hyperparameters, and set up an optimizer and a learning rate schedule.
2. Instantiate a pretrained model.
3. Convert a 🤗 Dataset to a `tf.data.Dataset`.
4. Compile your model.
5. Add callbacks to calculate metrics and upload your model to 🤗 Hub
6. Use the `fit()` method to run the training.
Start by defining the hyperparameters, optimizer and learning rate schedule:
```py
>>> from transformers import create_optimizer
>>> batch_size = 2
>>> num_epochs = 50
>>> num_train_steps = len(train_ds) * num_epochs
>>> learning_rate = 6e-5
>>> weight_decay_rate = 0.01
>>> optimizer, lr_schedule = create_optimizer(
... init_lr=learning_rate,
... num_train_steps=num_train_steps,
... weight_decay_rate=weight_decay_rate,
... num_warmup_steps=0,
... )
```
Then, load SegFormer with [`TFAutoModelForSemanticSegmentation`] along with the label mappings, and compile it with the
optimizer. Note that Transformers models all have a default task-relevant loss function, so you don't need to specify one unless you want to:
```py
>>> from transformers import TFAutoModelForSemanticSegmentation
>>> model = TFAutoModelForSemanticSegmentation.from_pretrained(
... checkpoint,
... id2label=id2label,
... label2id=label2id,
... )
>>> model.compile(optimizer=optimizer) # No loss argument!
```
Convert your datasets to the `tf.data.Dataset` format using the [`~datasets.Dataset.to_tf_dataset`] and the [`DefaultDataCollator`]:
```py
>>> from transformers import DefaultDataCollator
>>> data_collator = DefaultDataCollator(return_tensors="tf")
>>> tf_train_dataset = train_ds.to_tf_dataset(
... columns=["pixel_values", "label"],
... shuffle=True,
... batch_size=batch_size,
... collate_fn=data_collator,
... )
>>> tf_eval_dataset = test_ds.to_tf_dataset(
... columns=["pixel_values", "label"],
... shuffle=True,
... batch_size=batch_size,
... collate_fn=data_collator,
... )
```
To compute the accuracy from the predictions and push your model to the 🤗 Hub, use [Keras callbacks](../main_classes/keras_callbacks).
Pass your `compute_metrics` function to [`KerasMetricCallback`],
and use the [`PushToHubCallback`] to upload the model:
```py
>>> from transformers.keras_callbacks import KerasMetricCallback, PushToHubCallback
>>> metric_callback = KerasMetricCallback(
... metric_fn=compute_metrics, eval_dataset=tf_eval_dataset, batch_size=batch_size, label_cols=["labels"]
... )
>>> push_to_hub_callback = PushToHubCallback(output_dir="scene_segmentation", tokenizer=image_processor)
>>> callbacks = [metric_callback, push_to_hub_callback]
```
Finally, you are ready to train your model! Call `fit()` with your training and validation datasets, the number of epochs,
and your callbacks to fine-tune the model:
```py
>>> model.fit(
... tf_train_dataset,
... validation_data=tf_eval_dataset,
... callbacks=callbacks,
... epochs=num_epochs,
... )
```
Congratulations! You have fine-tuned your model and shared it on the 🤗 Hub. You can now use it for inference!
</tf>
</frameworkcontent>
### Inference
Great, now that you've finetuned a model, you can use it for inference!
Load an image for inference:
```py
>>> image = ds[0]["image"]
>>> image
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/semantic-seg-image.png" alt="Image of bedroom"/>
</div>
<frameworkcontent>
<pt>
We will now see how to infer without a pipeline. Process the image with an image processor and place the `pixel_values` on a GPU:
```py
>>> device = torch.device("cuda" if torch.cuda.is_available() else "cpu") # use GPU if available, otherwise use a CPU
>>> encoding = image_processor(image, return_tensors="pt")
>>> pixel_values = encoding.pixel_values.to(device)
```
Pass your input to the model and return the `logits`:
```py
>>> outputs = model(pixel_values=pixel_values)
>>> logits = outputs.logits.cpu()
```
Next, rescale the logits to the original image size:
```py
>>> upsampled_logits = nn.functional.interpolate(
... logits,
... size=image.size[::-1],
... mode="bilinear",
... align_corners=False,
... )
>>> pred_seg = upsampled_logits.argmax(dim=1)[0]
```
</pt>
</frameworkcontent>
<frameworkcontent>
<tf>
Load an image processor to preprocess the image and return the input as TensorFlow tensors:
```py
>>> from transformers import AutoImageProcessor
>>> image_processor = AutoImageProcessor.from_pretrained("MariaK/scene_segmentation")
>>> inputs = image_processor(image, return_tensors="tf")
```
Pass your input to the model and return the `logits`:
```py
>>> from transformers import TFAutoModelForSemanticSegmentation
>>> model = TFAutoModelForSemanticSegmentation.from_pretrained("MariaK/scene_segmentation")
>>> logits = model(**inputs).logits
```
Next, rescale the logits to the original image size and apply argmax on the class dimension:
```py
>>> logits = tf.transpose(logits, [0, 2, 3, 1])
>>> upsampled_logits = tf.image.resize(
... logits,
... # We reverse the shape of `image` because `image.size` returns width and height.
... image.size[::-1],
... )
>>> pred_seg = tf.math.argmax(upsampled_logits, axis=-1)[0]
```
</tf>
</frameworkcontent>
To visualize the results, load the [dataset color palette](https://github.com/tensorflow/models/blob/3f1ca33afe3c1631b733ea7e40c294273b9e406d/research/deeplab/utils/get_dataset_colormap.py#L51) as `ade_palette()` that maps each class to their RGB values. Then you can combine and plot your image and the predicted segmentation map:
```py
>>> import matplotlib.pyplot as plt
>>> import numpy as np
>>> color_seg = np.zeros((pred_seg.shape[0], pred_seg.shape[1], 3), dtype=np.uint8)
>>> palette = np.array(ade_palette())
>>> for label, color in enumerate(palette):
... color_seg[pred_seg == label, :] = color
>>> color_seg = color_seg[..., ::-1] # convert to BGR
>>> img = np.array(image) * 0.5 + color_seg * 0.5 # plot the image with the segmentation map
>>> img = img.astype(np.uint8)
>>> plt.figure(figsize=(15, 10))
>>> plt.imshow(img)
>>> plt.show()
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/semantic-seg-preds.png" alt="Image of bedroom overlaid with segmentation map"/>
</div>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/image_captioning.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Image captioning
[[open-in-colab]]
Image captioning is the task of predicting a caption for a given image. Common real world applications of it include
aiding visually impaired people that can help them navigate through different situations. Therefore, image captioning
helps to improve content accessibility for people by describing images to them.
This guide will show you how to:
* Fine-tune an image captioning model.
* Use the fine-tuned model for inference.
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install transformers datasets evaluate -q
pip install jiwer -q
```
We encourage you to log in to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to log in:
```python
from huggingface_hub import notebook_login
notebook_login()
```
## Load the Pokémon BLIP captions dataset
Use the 🤗 Dataset library to load a dataset that consists of {image-caption} pairs. To create your own image captioning dataset
in PyTorch, you can follow [this notebook](https://github.com/NielsRogge/Transformers-Tutorials/blob/master/GIT/Fine_tune_GIT_on_an_image_captioning_dataset.ipynb).
```python
from datasets import load_dataset
ds = load_dataset("lambdalabs/pokemon-blip-captions")
ds
```
```bash
DatasetDict({
train: Dataset({
features: ['image', 'text'],
num_rows: 833
})
})
```
The dataset has two features, `image` and `text`.
<Tip>
Many image captioning datasets contain multiple captions per image. In those cases, a common strategy is to randomly sample a caption amongst the available ones during training.
</Tip>
Split the dataset’s train split into a train and test set with the [~datasets.Dataset.train_test_split] method:
```python
ds = ds["train"].train_test_split(test_size=0.1)
train_ds = ds["train"]
test_ds = ds["test"]
```
Let's visualize a couple of samples from the training set.
```python
from textwrap import wrap
import matplotlib.pyplot as plt
import numpy as np
def plot_images(images, captions):
plt.figure(figsize=(20, 20))
for i in range(len(images)):
ax = plt.subplot(1, len(images), i + 1)
caption = captions[i]
caption = "\n".join(wrap(caption, 12))
plt.title(caption)
plt.imshow(images[i])
plt.axis("off")
sample_images_to_visualize = [np.array(train_ds[i]["image"]) for i in range(5)]
sample_captions = [train_ds[i]["text"] for i in range(5)]
plot_images(sample_images_to_visualize, sample_captions)
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/sample_training_images_image_cap.png" alt="Sample training images"/>
</div>
## Preprocess the dataset
Since the dataset has two modalities (image and text), the pre-processing pipeline will preprocess images and the captions.
To do so, load the processor class associated with the model you are about to fine-tune.
```python
from transformers import AutoProcessor
checkpoint = "microsoft/git-base"
processor = AutoProcessor.from_pretrained(checkpoint)
```
The processor will internally pre-process the image (which includes resizing, and pixel scaling) and tokenize the caption.
```python
def transforms(example_batch):
images = [x for x in example_batch["image"]]
captions = [x for x in example_batch["text"]]
inputs = processor(images=images, text=captions, padding="max_length")
inputs.update({"labels": inputs["input_ids"]})
return inputs
train_ds.set_transform(transforms)
test_ds.set_transform(transforms)
```
With the dataset ready, you can now set up the model for fine-tuning.
## Load a base model
Load the ["microsoft/git-base"](https://huggingface.co/microsoft/git-base) into a [`AutoModelForCausalLM`](https://huggingface.co/docs/transformers/model_doc/auto#transformers.AutoModelForCausalLM) object.
```python
from transformers import AutoModelForCausalLM
model = AutoModelForCausalLM.from_pretrained(checkpoint)
```
## Evaluate
Image captioning models are typically evaluated with the [Rouge Score](https://huggingface.co/spaces/evaluate-metric/rouge) or [Word Error Rate](https://huggingface.co/spaces/evaluate-metric/wer). For this guide, you will use the Word Error Rate (WER).
We use the 🤗 Evaluate library to do so. For potential limitations and other gotchas of the WER, refer to [this guide](https://huggingface.co/spaces/evaluate-metric/wer).
```python
from evaluate import load
import torch
wer = load("wer")
def compute_metrics(eval_pred):
logits, labels = eval_pred
predicted = logits.argmax(-1)
decoded_labels = processor.batch_decode(labels, skip_special_tokens=True)
decoded_predictions = processor.batch_decode(predicted, skip_special_tokens=True)
wer_score = wer.compute(predictions=decoded_predictions, references=decoded_labels)
return {"wer_score": wer_score}
```
## Train!
Now, you are ready to start fine-tuning the model. You will use the 🤗 [`Trainer`] for this.
First, define the training arguments using [`TrainingArguments`].
```python
from transformers import TrainingArguments, Trainer
model_name = checkpoint.split("/")[1]
training_args = TrainingArguments(
output_dir=f"{model_name}-pokemon",
learning_rate=5e-5,
num_train_epochs=50,
fp16=True,
per_device_train_batch_size=32,
per_device_eval_batch_size=32,
gradient_accumulation_steps=2,
save_total_limit=3,
evaluation_strategy="steps",
eval_steps=50,
save_strategy="steps",
save_steps=50,
logging_steps=50,
remove_unused_columns=False,
push_to_hub=True,
label_names=["labels"],
load_best_model_at_end=True,
)
```
Then pass them along with the datasets and the model to 🤗 Trainer.
```python
trainer = Trainer(
model=model,
args=training_args,
train_dataset=train_ds,
eval_dataset=test_ds,
compute_metrics=compute_metrics,
)
```
To start training, simply call [`~Trainer.train`] on the [`Trainer`] object.
```python
trainer.train()
```
You should see the training loss drop smoothly as training progresses.
Once training is completed, share your model to the Hub with the [`~Trainer.push_to_hub`] method so everyone can use your model:
```python
trainer.push_to_hub()
```
## Inference
Take a sample image from `test_ds` to test the model.
```python
from PIL import Image
import requests
url = "https://huggingface.co/datasets/sayakpaul/sample-datasets/resolve/main/pokemon.png"
image = Image.open(requests.get(url, stream=True).raw)
image
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/test_image_image_cap.png" alt="Test image"/>
</div>
Prepare image for the model.
```python
device = "cuda" if torch.cuda.is_available() else "cpu"
inputs = processor(images=image, return_tensors="pt").to(device)
pixel_values = inputs.pixel_values
```
Call [`generate`] and decode the predictions.
```python
generated_ids = model.generate(pixel_values=pixel_values, max_length=50)
generated_caption = processor.batch_decode(generated_ids, skip_special_tokens=True)[0]
print(generated_caption)
```
```bash
a drawing of a pink and blue pokemon
```
Looks like the fine-tuned model generated a pretty good caption!
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/summarization.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Summarization
[[open-in-colab]]
<Youtube id="yHnr5Dk2zCI"/>
Summarization creates a shorter version of a document or an article that captures all the important information. Along with translation, it is another example of a task that can be formulated as a sequence-to-sequence task. Summarization can be:
- Extractive: extract the most relevant information from a document.
- Abstractive: generate new text that captures the most relevant information.
This guide will show you how to:
1. Finetune [T5](https://huggingface.co/t5-small) on the California state bill subset of the [BillSum](https://huggingface.co/datasets/billsum) dataset for abstractive summarization.
2. Use your finetuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[BART](../model_doc/bart), [BigBird-Pegasus](../model_doc/bigbird_pegasus), [Blenderbot](../model_doc/blenderbot), [BlenderbotSmall](../model_doc/blenderbot-small), [Encoder decoder](../model_doc/encoder-decoder), [FairSeq Machine-Translation](../model_doc/fsmt), [GPTSAN-japanese](../model_doc/gptsan-japanese), [LED](../model_doc/led), [LongT5](../model_doc/longt5), [M2M100](../model_doc/m2m_100), [Marian](../model_doc/marian), [mBART](../model_doc/mbart), [MT5](../model_doc/mt5), [MVP](../model_doc/mvp), [NLLB](../model_doc/nllb), [NLLB-MOE](../model_doc/nllb-moe), [Pegasus](../model_doc/pegasus), [PEGASUS-X](../model_doc/pegasus_x), [PLBart](../model_doc/plbart), [ProphetNet](../model_doc/prophetnet), [SeamlessM4T](../model_doc/seamless_m4t), [SeamlessM4Tv2](../model_doc/seamless_m4t_v2), [SwitchTransformers](../model_doc/switch_transformers), [T5](../model_doc/t5), [UMT5](../model_doc/umt5), [XLM-ProphetNet](../model_doc/xlm-prophetnet)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install transformers datasets evaluate rouge_score
```
We encourage you to login to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to login:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load BillSum dataset
Start by loading the smaller California state bill subset of the BillSum dataset from the 🤗 Datasets library:
```py
>>> from datasets import load_dataset
>>> billsum = load_dataset("billsum", split="ca_test")
```
Split the dataset into a train and test set with the [`~datasets.Dataset.train_test_split`] method:
```py
>>> billsum = billsum.train_test_split(test_size=0.2)
```
Then take a look at an example:
```py
>>> billsum["train"][0]
{'summary': 'Existing law authorizes state agencies to enter into contracts for the acquisition of goods or services upon approval by the Department of General Services. Existing law sets forth various requirements and prohibitions for those contracts, including, but not limited to, a prohibition on entering into contracts for the acquisition of goods or services of $100,000 or more with a contractor that discriminates between spouses and domestic partners or same-sex and different-sex couples in the provision of benefits. Existing law provides that a contract entered into in violation of those requirements and prohibitions is void and authorizes the state or any person acting on behalf of the state to bring a civil action seeking a determination that a contract is in violation and therefore void. Under existing law, a willful violation of those requirements and prohibitions is a misdemeanor.\nThis bill would also prohibit a state agency from entering into contracts for the acquisition of goods or services of $100,000 or more with a contractor that discriminates between employees on the basis of gender identity in the provision of benefits, as specified. By expanding the scope of a crime, this bill would impose a state-mandated local program.\nThe California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.\nThis bill would provide that no reimbursement is required by this act for a specified reason.',
'text': 'The people of the State of California do enact as follows:\n\n\nSECTION 1.\nSection 10295.35 is added to the Public Contract Code, to read:\n10295.35.\n(a) (1) Notwithstanding any other law, a state agency shall not enter into any contract for the acquisition of goods or services in the amount of one hundred thousand dollars ($100,000) or more with a contractor that, in the provision of benefits, discriminates between employees on the basis of an employee’s or dependent’s actual or perceived gender identity, including, but not limited to, the employee’s or dependent’s identification as transgender.\n(2) For purposes of this section, “contract” includes contracts with a cumulative amount of one hundred thousand dollars ($100,000) or more per contractor in each fiscal year.\n(3) For purposes of this section, an employee health plan is discriminatory if the plan is not consistent with Section 1365.5 of the Health and Safety Code and Section 10140 of the Insurance Code.\n(4) The requirements of this section shall apply only to those portions of a contractor’s operations that occur under any of the following conditions:\n(A) Within the state.\n(B) On real property outside the state if the property is owned by the state or if the state has a right to occupy the property, and if the contractor’s presence at that location is connected to a contract with the state.\n(C) Elsewhere in the United States where work related to a state contract is being performed.\n(b) Contractors shall treat as confidential, to the maximum extent allowed by law or by the requirement of the contractor’s insurance provider, any request by an employee or applicant for employment benefits or any documentation of eligibility for benefits submitted by an employee or applicant for employment.\n(c) After taking all reasonable measures to find a contractor that complies with this section, as determined by the state agency, the requirements of this section may be waived under any of the following circumstances:\n(1) There is only one prospective contractor willing to enter into a specific contract with the state agency.\n(2) The contract is necessary to respond to an emergency, as determined by the state agency, that endangers the public health, welfare, or safety, or the contract is necessary for the provision of essential services, and no entity that complies with the requirements of this section capable of responding to the emergency is immediately available.\n(3) The requirements of this section violate, or are inconsistent with, the terms or conditions of a grant, subvention, or agreement, if the agency has made a good faith attempt to change the terms or conditions of any grant, subvention, or agreement to authorize application of this section.\n(4) The contractor is providing wholesale or bulk water, power, or natural gas, the conveyance or transmission of the same, or ancillary services, as required for ensuring reliable services in accordance with good utility practice, if the purchase of the same cannot practically be accomplished through the standard competitive bidding procedures and the contractor is not providing direct retail services to end users.\n(d) (1) A contractor shall not be deemed to discriminate in the provision of benefits if the contractor, in providing the benefits, pays the actual costs incurred in obtaining the benefit.\n(2) If a contractor is unable to provide a certain benefit, despite taking reasonable measures to do so, the contractor shall not be deemed to discriminate in the provision of benefits.\n(e) (1) Every contract subject to this chapter shall contain a statement by which the contractor certifies that the contractor is in compliance with this section.\n(2) The department or other contracting agency shall enforce this section pursuant to its existing enforcement powers.\n(3) (A) If a contractor falsely certifies that it is in compliance with this section, the contract with that contractor shall be subject to Article 9 (commencing with Section 10420), unless, within a time period specified by the department or other contracting agency, the contractor provides to the department or agency proof that it has complied, or is in the process of complying, with this section.\n(B) The application of the remedies or penalties contained in Article 9 (commencing with Section 10420) to a contract subject to this chapter shall not preclude the application of any existing remedies otherwise available to the department or other contracting agency under its existing enforcement powers.\n(f) Nothing in this section is intended to regulate the contracting practices of any local jurisdiction.\n(g) This section shall be construed so as not to conflict with applicable federal laws, rules, or regulations. In the event that a court or agency of competent jurisdiction holds that federal law, rule, or regulation invalidates any clause, sentence, paragraph, or section of this code or the application thereof to any person or circumstances, it is the intent of the state that the court or agency sever that clause, sentence, paragraph, or section so that the remainder of this section shall remain in effect.\nSEC. 2.\nSection 10295.35 of the Public Contract Code shall not be construed to create any new enforcement authority or responsibility in the Department of General Services or any other contracting agency.\nSEC. 3.\nNo reimbursement is required by this act pursuant to Section 6 of Article XIII\u2009B of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIII\u2009B of the California Constitution.',
'title': 'An act to add Section 10295.35 to the Public Contract Code, relating to public contracts.'}
```
There are two fields that you'll want to use:
- `text`: the text of the bill which'll be the input to the model.
- `summary`: a condensed version of `text` which'll be the model target.
## Preprocess
The next step is to load a T5 tokenizer to process `text` and `summary`:
```py
>>> from transformers import AutoTokenizer
>>> checkpoint = "t5-small"
>>> tokenizer = AutoTokenizer.from_pretrained(checkpoint)
```
The preprocessing function you want to create needs to:
1. Prefix the input with a prompt so T5 knows this is a summarization task. Some models capable of multiple NLP tasks require prompting for specific tasks.
2. Use the keyword `text_target` argument when tokenizing labels.
3. Truncate sequences to be no longer than the maximum length set by the `max_length` parameter.
```py
>>> prefix = "summarize: "
>>> def preprocess_function(examples):
... inputs = [prefix + doc for doc in examples["text"]]
... model_inputs = tokenizer(inputs, max_length=1024, truncation=True)
... labels = tokenizer(text_target=examples["summary"], max_length=128, truncation=True)
... model_inputs["labels"] = labels["input_ids"]
... return model_inputs
```
To apply the preprocessing function over the entire dataset, use 🤗 Datasets [`~datasets.Dataset.map`] method. You can speed up the `map` function by setting `batched=True` to process multiple elements of the dataset at once:
```py
>>> tokenized_billsum = billsum.map(preprocess_function, batched=True)
```
Now create a batch of examples using [`DataCollatorForSeq2Seq`]. It's more efficient to *dynamically pad* the sentences to the longest length in a batch during collation, instead of padding the whole dataset to the maximum length.
<frameworkcontent>
<pt>
```py
>>> from transformers import DataCollatorForSeq2Seq
>>> data_collator = DataCollatorForSeq2Seq(tokenizer=tokenizer, model=checkpoint)
```
</pt>
<tf>
```py
>>> from transformers import DataCollatorForSeq2Seq
>>> data_collator = DataCollatorForSeq2Seq(tokenizer=tokenizer, model=checkpoint, return_tensors="tf")
```
</tf>
</frameworkcontent>
## Evaluate
Including a metric during training is often helpful for evaluating your model's performance. You can quickly load a evaluation method with the 🤗 [Evaluate](https://huggingface.co/docs/evaluate/index) library. For this task, load the [ROUGE](https://huggingface.co/spaces/evaluate-metric/rouge) metric (see the 🤗 Evaluate [quick tour](https://huggingface.co/docs/evaluate/a_quick_tour) to learn more about how to load and compute a metric):
```py
>>> import evaluate
>>> rouge = evaluate.load("rouge")
```
Then create a function that passes your predictions and labels to [`~evaluate.EvaluationModule.compute`] to calculate the ROUGE metric:
```py
>>> import numpy as np
>>> def compute_metrics(eval_pred):
... predictions, labels = eval_pred
... decoded_preds = tokenizer.batch_decode(predictions, skip_special_tokens=True)
... labels = np.where(labels != -100, labels, tokenizer.pad_token_id)
... decoded_labels = tokenizer.batch_decode(labels, skip_special_tokens=True)
... result = rouge.compute(predictions=decoded_preds, references=decoded_labels, use_stemmer=True)
... prediction_lens = [np.count_nonzero(pred != tokenizer.pad_token_id) for pred in predictions]
... result["gen_len"] = np.mean(prediction_lens)
... return {k: round(v, 4) for k, v in result.items()}
```
Your `compute_metrics` function is ready to go now, and you'll return to it when you setup your training.
## Train
<frameworkcontent>
<pt>
<Tip>
If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the basic tutorial [here](../training#train-with-pytorch-trainer)!
</Tip>
You're ready to start training your model now! Load T5 with [`AutoModelForSeq2SeqLM`]:
```py
>>> from transformers import AutoModelForSeq2SeqLM, Seq2SeqTrainingArguments, Seq2SeqTrainer
>>> model = AutoModelForSeq2SeqLM.from_pretrained(checkpoint)
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`Seq2SeqTrainingArguments`]. The only required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model). At the end of each epoch, the [`Trainer`] will evaluate the ROUGE metric and save the training checkpoint.
2. Pass the training arguments to [`Seq2SeqTrainer`] along with the model, dataset, tokenizer, data collator, and `compute_metrics` function.
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> training_args = Seq2SeqTrainingArguments(
... output_dir="my_awesome_billsum_model",
... evaluation_strategy="epoch",
... learning_rate=2e-5,
... per_device_train_batch_size=16,
... per_device_eval_batch_size=16,
... weight_decay=0.01,
... save_total_limit=3,
... num_train_epochs=4,
... predict_with_generate=True,
... fp16=True,
... push_to_hub=True,
... )
>>> trainer = Seq2SeqTrainer(
... model=model,
... args=training_args,
... train_dataset=tokenized_billsum["train"],
... eval_dataset=tokenized_billsum["test"],
... tokenizer=tokenizer,
... data_collator=data_collator,
... compute_metrics=compute_metrics,
... )
>>> trainer.train()
```
Once training is completed, share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
</pt>
<tf>
<Tip>
If you aren't familiar with finetuning a model with Keras, take a look at the basic tutorial [here](../training#train-a-tensorflow-model-with-keras)!
</Tip>
To finetune a model in TensorFlow, start by setting up an optimizer function, learning rate schedule, and some training hyperparameters:
```py
>>> from transformers import create_optimizer, AdamWeightDecay
>>> optimizer = AdamWeightDecay(learning_rate=2e-5, weight_decay_rate=0.01)
```
Then you can load T5 with [`TFAutoModelForSeq2SeqLM`]:
```py
>>> from transformers import TFAutoModelForSeq2SeqLM
>>> model = TFAutoModelForSeq2SeqLM.from_pretrained(checkpoint)
```
Convert your datasets to the `tf.data.Dataset` format with [`~transformers.TFPreTrainedModel.prepare_tf_dataset`]:
```py
>>> tf_train_set = model.prepare_tf_dataset(
... tokenized_billsum["train"],
... shuffle=True,
... batch_size=16,
... collate_fn=data_collator,
... )
>>> tf_test_set = model.prepare_tf_dataset(
... tokenized_billsum["test"],
... shuffle=False,
... batch_size=16,
... collate_fn=data_collator,
... )
```
Configure the model for training with [`compile`](https://keras.io/api/models/model_training_apis/#compile-method). Note that Transformers models all have a default task-relevant loss function, so you don't need to specify one unless you want to:
```py
>>> import tensorflow as tf
>>> model.compile(optimizer=optimizer) # No loss argument!
```
The last two things to setup before you start training is to compute the ROUGE score from the predictions, and provide a way to push your model to the Hub. Both are done by using [Keras callbacks](../main_classes/keras_callbacks).
Pass your `compute_metrics` function to [`~transformers.KerasMetricCallback`]:
```py
>>> from transformers.keras_callbacks import KerasMetricCallback
>>> metric_callback = KerasMetricCallback(metric_fn=compute_metrics, eval_dataset=tf_validation_set)
```
Specify where to push your model and tokenizer in the [`~transformers.PushToHubCallback`]:
```py
>>> from transformers.keras_callbacks import PushToHubCallback
>>> push_to_hub_callback = PushToHubCallback(
... output_dir="my_awesome_billsum_model",
... tokenizer=tokenizer,
... )
```
Then bundle your callbacks together:
```py
>>> callbacks = [metric_callback, push_to_hub_callback]
```
Finally, you're ready to start training your model! Call [`fit`](https://keras.io/api/models/model_training_apis/#fit-method) with your training and validation datasets, the number of epochs, and your callbacks to finetune the model:
```py
>>> model.fit(x=tf_train_set, validation_data=tf_test_set, epochs=3, callbacks=callbacks)
```
Once training is completed, your model is automatically uploaded to the Hub so everyone can use it!
</tf>
</frameworkcontent>
<Tip>
For a more in-depth example of how to finetune a model for summarization, take a look at the corresponding
[PyTorch notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/summarization.ipynb)
or [TensorFlow notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/summarization-tf.ipynb).
</Tip>
## Inference
Great, now that you've finetuned a model, you can use it for inference!
Come up with some text you'd like to summarize. For T5, you need to prefix your input depending on the task you're working on. For summarization you should prefix your input as shown below:
```py
>>> text = "summarize: The Inflation Reduction Act lowers prescription drug costs, health care costs, and energy costs. It's the most aggressive action on tackling the climate crisis in American history, which will lift up American workers and create good-paying, union jobs across the country. It'll lower the deficit and ask the ultra-wealthy and corporations to pay their fair share. And no one making under $400,000 per year will pay a penny more in taxes."
```
The simplest way to try out your finetuned model for inference is to use it in a [`pipeline`]. Instantiate a `pipeline` for summarization with your model, and pass your text to it:
```py
>>> from transformers import pipeline
>>> summarizer = pipeline("summarization", model="stevhliu/my_awesome_billsum_model")
>>> summarizer(text)
[{"summary_text": "The Inflation Reduction Act lowers prescription drug costs, health care costs, and energy costs. It's the most aggressive action on tackling the climate crisis in American history, which will lift up American workers and create good-paying, union jobs across the country."}]
```
You can also manually replicate the results of the `pipeline` if you'd like:
<frameworkcontent>
<pt>
Tokenize the text and return the `input_ids` as PyTorch tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("stevhliu/my_awesome_billsum_model")
>>> inputs = tokenizer(text, return_tensors="pt").input_ids
```
Use the [`~transformers.generation_utils.GenerationMixin.generate`] method to create the summarization. For more details about the different text generation strategies and parameters for controlling generation, check out the [Text Generation](../main_classes/text_generation) API.
```py
>>> from transformers import AutoModelForSeq2SeqLM
>>> model = AutoModelForSeq2SeqLM.from_pretrained("stevhliu/my_awesome_billsum_model")
>>> outputs = model.generate(inputs, max_new_tokens=100, do_sample=False)
```
Decode the generated token ids back into text:
```py
>>> tokenizer.decode(outputs[0], skip_special_tokens=True)
'the inflation reduction act lowers prescription drug costs, health care costs, and energy costs. it's the most aggressive action on tackling the climate crisis in american history. it will ask the ultra-wealthy and corporations to pay their fair share.'
```
</pt>
<tf>
Tokenize the text and return the `input_ids` as TensorFlow tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("stevhliu/my_awesome_billsum_model")
>>> inputs = tokenizer(text, return_tensors="tf").input_ids
```
Use the [`~transformers.generation_tf_utils.TFGenerationMixin.generate`] method to create the summarization. For more details about the different text generation strategies and parameters for controlling generation, check out the [Text Generation](../main_classes/text_generation) API.
```py
>>> from transformers import TFAutoModelForSeq2SeqLM
>>> model = TFAutoModelForSeq2SeqLM.from_pretrained("stevhliu/my_awesome_billsum_model")
>>> outputs = model.generate(inputs, max_new_tokens=100, do_sample=False)
```
Decode the generated token ids back into text:
```py
>>> tokenizer.decode(outputs[0], skip_special_tokens=True)
'the inflation reduction act lowers prescription drug costs, health care costs, and energy costs. it's the most aggressive action on tackling the climate crisis in american history. it will ask the ultra-wealthy and corporations to pay their fair share.'
```
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/multiple_choice.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Multiple choice
[[open-in-colab]]
A multiple choice task is similar to question answering, except several candidate answers are provided along with a context and the model is trained to select the correct answer.
This guide will show you how to:
1. Finetune [BERT](https://huggingface.co/bert-base-uncased) on the `regular` configuration of the [SWAG](https://huggingface.co/datasets/swag) dataset to select the best answer given multiple options and some context.
2. Use your finetuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[ALBERT](../model_doc/albert), [BERT](../model_doc/bert), [BigBird](../model_doc/big_bird), [CamemBERT](../model_doc/camembert), [CANINE](../model_doc/canine), [ConvBERT](../model_doc/convbert), [Data2VecText](../model_doc/data2vec-text), [DeBERTa-v2](../model_doc/deberta-v2), [DistilBERT](../model_doc/distilbert), [ELECTRA](../model_doc/electra), [ERNIE](../model_doc/ernie), [ErnieM](../model_doc/ernie_m), [FlauBERT](../model_doc/flaubert), [FNet](../model_doc/fnet), [Funnel Transformer](../model_doc/funnel), [I-BERT](../model_doc/ibert), [Longformer](../model_doc/longformer), [LUKE](../model_doc/luke), [MEGA](../model_doc/mega), [Megatron-BERT](../model_doc/megatron-bert), [MobileBERT](../model_doc/mobilebert), [MPNet](../model_doc/mpnet), [MRA](../model_doc/mra), [Nezha](../model_doc/nezha), [Nyströmformer](../model_doc/nystromformer), [QDQBert](../model_doc/qdqbert), [RemBERT](../model_doc/rembert), [RoBERTa](../model_doc/roberta), [RoBERTa-PreLayerNorm](../model_doc/roberta-prelayernorm), [RoCBert](../model_doc/roc_bert), [RoFormer](../model_doc/roformer), [SqueezeBERT](../model_doc/squeezebert), [XLM](../model_doc/xlm), [XLM-RoBERTa](../model_doc/xlm-roberta), [XLM-RoBERTa-XL](../model_doc/xlm-roberta-xl), [XLNet](../model_doc/xlnet), [X-MOD](../model_doc/xmod), [YOSO](../model_doc/yoso)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install transformers datasets evaluate
```
We encourage you to login to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to login:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load SWAG dataset
Start by loading the `regular` configuration of the SWAG dataset from the 🤗 Datasets library:
```py
>>> from datasets import load_dataset
>>> swag = load_dataset("swag", "regular")
```
Then take a look at an example:
```py
>>> swag["train"][0]
{'ending0': 'passes by walking down the street playing their instruments.',
'ending1': 'has heard approaching them.',
'ending2': "arrives and they're outside dancing and asleep.",
'ending3': 'turns the lead singer watches the performance.',
'fold-ind': '3416',
'gold-source': 'gold',
'label': 0,
'sent1': 'Members of the procession walk down the street holding small horn brass instruments.',
'sent2': 'A drum line',
'startphrase': 'Members of the procession walk down the street holding small horn brass instruments. A drum line',
'video-id': 'anetv_jkn6uvmqwh4'}
```
While it looks like there are a lot of fields here, it is actually pretty straightforward:
- `sent1` and `sent2`: these fields show how a sentence starts, and if you put the two together, you get the `startphrase` field.
- `ending`: suggests a possible ending for how a sentence can end, but only one of them is correct.
- `label`: identifies the correct sentence ending.
## Preprocess
The next step is to load a BERT tokenizer to process the sentence starts and the four possible endings:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("bert-base-uncased")
```
The preprocessing function you want to create needs to:
1. Make four copies of the `sent1` field and combine each of them with `sent2` to recreate how a sentence starts.
2. Combine `sent2` with each of the four possible sentence endings.
3. Flatten these two lists so you can tokenize them, and then unflatten them afterward so each example has a corresponding `input_ids`, `attention_mask`, and `labels` field.
```py
>>> ending_names = ["ending0", "ending1", "ending2", "ending3"]
>>> def preprocess_function(examples):
... first_sentences = [[context] * 4 for context in examples["sent1"]]
... question_headers = examples["sent2"]
... second_sentences = [
... [f"{header} {examples[end][i]}" for end in ending_names] for i, header in enumerate(question_headers)
... ]
... first_sentences = sum(first_sentences, [])
... second_sentences = sum(second_sentences, [])
... tokenized_examples = tokenizer(first_sentences, second_sentences, truncation=True)
... return {k: [v[i : i + 4] for i in range(0, len(v), 4)] for k, v in tokenized_examples.items()}
```
To apply the preprocessing function over the entire dataset, use 🤗 Datasets [`~datasets.Dataset.map`] method. You can speed up the `map` function by setting `batched=True` to process multiple elements of the dataset at once:
```py
tokenized_swag = swag.map(preprocess_function, batched=True)
```
🤗 Transformers doesn't have a data collator for multiple choice, so you'll need to adapt the [`DataCollatorWithPadding`] to create a batch of examples. It's more efficient to *dynamically pad* the sentences to the longest length in a batch during collation, instead of padding the whole dataset to the maximum length.
`DataCollatorForMultipleChoice` flattens all the model inputs, applies padding, and then unflattens the results:
<frameworkcontent>
<pt>
```py
>>> from dataclasses import dataclass
>>> from transformers.tokenization_utils_base import PreTrainedTokenizerBase, PaddingStrategy
>>> from typing import Optional, Union
>>> import torch
>>> @dataclass
... class DataCollatorForMultipleChoice:
... """
... Data collator that will dynamically pad the inputs for multiple choice received.
... """
... tokenizer: PreTrainedTokenizerBase
... padding: Union[bool, str, PaddingStrategy] = True
... max_length: Optional[int] = None
... pad_to_multiple_of: Optional[int] = None
... def __call__(self, features):
... label_name = "label" if "label" in features[0].keys() else "labels"
... labels = [feature.pop(label_name) for feature in features]
... batch_size = len(features)
... num_choices = len(features[0]["input_ids"])
... flattened_features = [
... [{k: v[i] for k, v in feature.items()} for i in range(num_choices)] for feature in features
... ]
... flattened_features = sum(flattened_features, [])
... batch = self.tokenizer.pad(
... flattened_features,
... padding=self.padding,
... max_length=self.max_length,
... pad_to_multiple_of=self.pad_to_multiple_of,
... return_tensors="pt",
... )
... batch = {k: v.view(batch_size, num_choices, -1) for k, v in batch.items()}
... batch["labels"] = torch.tensor(labels, dtype=torch.int64)
... return batch
```
</pt>
<tf>
```py
>>> from dataclasses import dataclass
>>> from transformers.tokenization_utils_base import PreTrainedTokenizerBase, PaddingStrategy
>>> from typing import Optional, Union
>>> import tensorflow as tf
>>> @dataclass
... class DataCollatorForMultipleChoice:
... """
... Data collator that will dynamically pad the inputs for multiple choice received.
... """
... tokenizer: PreTrainedTokenizerBase
... padding: Union[bool, str, PaddingStrategy] = True
... max_length: Optional[int] = None
... pad_to_multiple_of: Optional[int] = None
... def __call__(self, features):
... label_name = "label" if "label" in features[0].keys() else "labels"
... labels = [feature.pop(label_name) for feature in features]
... batch_size = len(features)
... num_choices = len(features[0]["input_ids"])
... flattened_features = [
... [{k: v[i] for k, v in feature.items()} for i in range(num_choices)] for feature in features
... ]
... flattened_features = sum(flattened_features, [])
... batch = self.tokenizer.pad(
... flattened_features,
... padding=self.padding,
... max_length=self.max_length,
... pad_to_multiple_of=self.pad_to_multiple_of,
... return_tensors="tf",
... )
... batch = {k: tf.reshape(v, (batch_size, num_choices, -1)) for k, v in batch.items()}
... batch["labels"] = tf.convert_to_tensor(labels, dtype=tf.int64)
... return batch
```
</tf>
</frameworkcontent>
## Evaluate
Including a metric during training is often helpful for evaluating your model's performance. You can quickly load a evaluation method with the 🤗 [Evaluate](https://huggingface.co/docs/evaluate/index) library. For this task, load the [accuracy](https://huggingface.co/spaces/evaluate-metric/accuracy) metric (see the 🤗 Evaluate [quick tour](https://huggingface.co/docs/evaluate/a_quick_tour) to learn more about how to load and compute a metric):
```py
>>> import evaluate
>>> accuracy = evaluate.load("accuracy")
```
Then create a function that passes your predictions and labels to [`~evaluate.EvaluationModule.compute`] to calculate the accuracy:
```py
>>> import numpy as np
>>> def compute_metrics(eval_pred):
... predictions, labels = eval_pred
... predictions = np.argmax(predictions, axis=1)
... return accuracy.compute(predictions=predictions, references=labels)
```
Your `compute_metrics` function is ready to go now, and you'll return to it when you setup your training.
## Train
<frameworkcontent>
<pt>
<Tip>
If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the basic tutorial [here](../training#train-with-pytorch-trainer)!
</Tip>
You're ready to start training your model now! Load BERT with [`AutoModelForMultipleChoice`]:
```py
>>> from transformers import AutoModelForMultipleChoice, TrainingArguments, Trainer
>>> model = AutoModelForMultipleChoice.from_pretrained("bert-base-uncased")
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`TrainingArguments`]. The only required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model). At the end of each epoch, the [`Trainer`] will evaluate the accuracy and save the training checkpoint.
2. Pass the training arguments to [`Trainer`] along with the model, dataset, tokenizer, data collator, and `compute_metrics` function.
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> training_args = TrainingArguments(
... output_dir="my_awesome_swag_model",
... evaluation_strategy="epoch",
... save_strategy="epoch",
... load_best_model_at_end=True,
... learning_rate=5e-5,
... per_device_train_batch_size=16,
... per_device_eval_batch_size=16,
... num_train_epochs=3,
... weight_decay=0.01,
... push_to_hub=True,
... )
>>> trainer = Trainer(
... model=model,
... args=training_args,
... train_dataset=tokenized_swag["train"],
... eval_dataset=tokenized_swag["validation"],
... tokenizer=tokenizer,
... data_collator=DataCollatorForMultipleChoice(tokenizer=tokenizer),
... compute_metrics=compute_metrics,
... )
>>> trainer.train()
```
Once training is completed, share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
</pt>
<tf>
<Tip>
If you aren't familiar with finetuning a model with Keras, take a look at the basic tutorial [here](../training#train-a-tensorflow-model-with-keras)!
</Tip>
To finetune a model in TensorFlow, start by setting up an optimizer function, learning rate schedule, and some training hyperparameters:
```py
>>> from transformers import create_optimizer
>>> batch_size = 16
>>> num_train_epochs = 2
>>> total_train_steps = (len(tokenized_swag["train"]) // batch_size) * num_train_epochs
>>> optimizer, schedule = create_optimizer(init_lr=5e-5, num_warmup_steps=0, num_train_steps=total_train_steps)
```
Then you can load BERT with [`TFAutoModelForMultipleChoice`]:
```py
>>> from transformers import TFAutoModelForMultipleChoice
>>> model = TFAutoModelForMultipleChoice.from_pretrained("bert-base-uncased")
```
Convert your datasets to the `tf.data.Dataset` format with [`~transformers.TFPreTrainedModel.prepare_tf_dataset`]:
```py
>>> data_collator = DataCollatorForMultipleChoice(tokenizer=tokenizer)
>>> tf_train_set = model.prepare_tf_dataset(
... tokenized_swag["train"],
... shuffle=True,
... batch_size=batch_size,
... collate_fn=data_collator,
... )
>>> tf_validation_set = model.prepare_tf_dataset(
... tokenized_swag["validation"],
... shuffle=False,
... batch_size=batch_size,
... collate_fn=data_collator,
... )
```
Configure the model for training with [`compile`](https://keras.io/api/models/model_training_apis/#compile-method). Note that Transformers models all have a default task-relevant loss function, so you don't need to specify one unless you want to:
```py
>>> model.compile(optimizer=optimizer) # No loss argument!
```
The last two things to setup before you start training is to compute the accuracy from the predictions, and provide a way to push your model to the Hub. Both are done by using [Keras callbacks](../main_classes/keras_callbacks).
Pass your `compute_metrics` function to [`~transformers.KerasMetricCallback`]:
```py
>>> from transformers.keras_callbacks import KerasMetricCallback
>>> metric_callback = KerasMetricCallback(metric_fn=compute_metrics, eval_dataset=tf_validation_set)
```
Specify where to push your model and tokenizer in the [`~transformers.PushToHubCallback`]:
```py
>>> from transformers.keras_callbacks import PushToHubCallback
>>> push_to_hub_callback = PushToHubCallback(
... output_dir="my_awesome_model",
... tokenizer=tokenizer,
... )
```
Then bundle your callbacks together:
```py
>>> callbacks = [metric_callback, push_to_hub_callback]
```
Finally, you're ready to start training your model! Call [`fit`](https://keras.io/api/models/model_training_apis/#fit-method) with your training and validation datasets, the number of epochs, and your callbacks to finetune the model:
```py
>>> model.fit(x=tf_train_set, validation_data=tf_validation_set, epochs=2, callbacks=callbacks)
```
Once training is completed, your model is automatically uploaded to the Hub so everyone can use it!
</tf>
</frameworkcontent>
<Tip>
For a more in-depth example of how to finetune a model for multiple choice, take a look at the corresponding
[PyTorch notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/multiple_choice.ipynb)
or [TensorFlow notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/multiple_choice-tf.ipynb).
</Tip>
## Inference
Great, now that you've finetuned a model, you can use it for inference!
Come up with some text and two candidate answers:
```py
>>> prompt = "France has a bread law, Le Décret Pain, with strict rules on what is allowed in a traditional baguette."
>>> candidate1 = "The law does not apply to croissants and brioche."
>>> candidate2 = "The law applies to baguettes."
```
<frameworkcontent>
<pt>
Tokenize each prompt and candidate answer pair and return PyTorch tensors. You should also create some `labels`:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("my_awesome_swag_model")
>>> inputs = tokenizer([[prompt, candidate1], [prompt, candidate2]], return_tensors="pt", padding=True)
>>> labels = torch.tensor(0).unsqueeze(0)
```
Pass your inputs and labels to the model and return the `logits`:
```py
>>> from transformers import AutoModelForMultipleChoice
>>> model = AutoModelForMultipleChoice.from_pretrained("my_awesome_swag_model")
>>> outputs = model(**{k: v.unsqueeze(0) for k, v in inputs.items()}, labels=labels)
>>> logits = outputs.logits
```
Get the class with the highest probability:
```py
>>> predicted_class = logits.argmax().item()
>>> predicted_class
'0'
```
</pt>
<tf>
Tokenize each prompt and candidate answer pair and return TensorFlow tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("my_awesome_swag_model")
>>> inputs = tokenizer([[prompt, candidate1], [prompt, candidate2]], return_tensors="tf", padding=True)
```
Pass your inputs to the model and return the `logits`:
```py
>>> from transformers import TFAutoModelForMultipleChoice
>>> model = TFAutoModelForMultipleChoice.from_pretrained("my_awesome_swag_model")
>>> inputs = {k: tf.expand_dims(v, 0) for k, v in inputs.items()}
>>> outputs = model(inputs)
>>> logits = outputs.logits
```
Get the class with the highest probability:
```py
>>> predicted_class = int(tf.math.argmax(logits, axis=-1)[0])
>>> predicted_class
'0'
```
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/translation.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Translation
[[open-in-colab]]
<Youtube id="1JvfrvZgi6c"/>
Translation converts a sequence of text from one language to another. It is one of several tasks you can formulate as a sequence-to-sequence problem, a powerful framework for returning some output from an input, like translation or summarization. Translation systems are commonly used for translation between different language texts, but it can also be used for speech or some combination in between like text-to-speech or speech-to-text.
This guide will show you how to:
1. Finetune [T5](https://huggingface.co/t5-small) on the English-French subset of the [OPUS Books](https://huggingface.co/datasets/opus_books) dataset to translate English text to French.
2. Use your finetuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[BART](../model_doc/bart), [BigBird-Pegasus](../model_doc/bigbird_pegasus), [Blenderbot](../model_doc/blenderbot), [BlenderbotSmall](../model_doc/blenderbot-small), [Encoder decoder](../model_doc/encoder-decoder), [FairSeq Machine-Translation](../model_doc/fsmt), [GPTSAN-japanese](../model_doc/gptsan-japanese), [LED](../model_doc/led), [LongT5](../model_doc/longt5), [M2M100](../model_doc/m2m_100), [Marian](../model_doc/marian), [mBART](../model_doc/mbart), [MT5](../model_doc/mt5), [MVP](../model_doc/mvp), [NLLB](../model_doc/nllb), [NLLB-MOE](../model_doc/nllb-moe), [Pegasus](../model_doc/pegasus), [PEGASUS-X](../model_doc/pegasus_x), [PLBart](../model_doc/plbart), [ProphetNet](../model_doc/prophetnet), [SeamlessM4T](../model_doc/seamless_m4t), [SeamlessM4Tv2](../model_doc/seamless_m4t_v2), [SwitchTransformers](../model_doc/switch_transformers), [T5](../model_doc/t5), [UMT5](../model_doc/umt5), [XLM-ProphetNet](../model_doc/xlm-prophetnet)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install transformers datasets evaluate sacrebleu
```
We encourage you to login to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to login:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load OPUS Books dataset
Start by loading the English-French subset of the [OPUS Books](https://huggingface.co/datasets/opus_books) dataset from the 🤗 Datasets library:
```py
>>> from datasets import load_dataset
>>> books = load_dataset("opus_books", "en-fr")
```
Split the dataset into a train and test set with the [`~datasets.Dataset.train_test_split`] method:
```py
>>> books = books["train"].train_test_split(test_size=0.2)
```
Then take a look at an example:
```py
>>> books["train"][0]
{'id': '90560',
'translation': {'en': 'But this lofty plateau measured only a few fathoms, and soon we reentered Our Element.',
'fr': 'Mais ce plateau élevé ne mesurait que quelques toises, et bientôt nous fûmes rentrés dans notre élément.'}}
```
`translation`: an English and French translation of the text.
## Preprocess
<Youtube id="XAR8jnZZuUs"/>
The next step is to load a T5 tokenizer to process the English-French language pairs:
```py
>>> from transformers import AutoTokenizer
>>> checkpoint = "t5-small"
>>> tokenizer = AutoTokenizer.from_pretrained(checkpoint)
```
The preprocessing function you want to create needs to:
1. Prefix the input with a prompt so T5 knows this is a translation task. Some models capable of multiple NLP tasks require prompting for specific tasks.
2. Tokenize the input (English) and target (French) separately because you can't tokenize French text with a tokenizer pretrained on an English vocabulary.
3. Truncate sequences to be no longer than the maximum length set by the `max_length` parameter.
```py
>>> source_lang = "en"
>>> target_lang = "fr"
>>> prefix = "translate English to French: "
>>> def preprocess_function(examples):
... inputs = [prefix + example[source_lang] for example in examples["translation"]]
... targets = [example[target_lang] for example in examples["translation"]]
... model_inputs = tokenizer(inputs, text_target=targets, max_length=128, truncation=True)
... return model_inputs
```
To apply the preprocessing function over the entire dataset, use 🤗 Datasets [`~datasets.Dataset.map`] method. You can speed up the `map` function by setting `batched=True` to process multiple elements of the dataset at once:
```py
>>> tokenized_books = books.map(preprocess_function, batched=True)
```
Now create a batch of examples using [`DataCollatorForSeq2Seq`]. It's more efficient to *dynamically pad* the sentences to the longest length in a batch during collation, instead of padding the whole dataset to the maximum length.
<frameworkcontent>
<pt>
```py
>>> from transformers import DataCollatorForSeq2Seq
>>> data_collator = DataCollatorForSeq2Seq(tokenizer=tokenizer, model=checkpoint)
```
</pt>
<tf>
```py
>>> from transformers import DataCollatorForSeq2Seq
>>> data_collator = DataCollatorForSeq2Seq(tokenizer=tokenizer, model=checkpoint, return_tensors="tf")
```
</tf>
</frameworkcontent>
## Evaluate
Including a metric during training is often helpful for evaluating your model's performance. You can quickly load a evaluation method with the 🤗 [Evaluate](https://huggingface.co/docs/evaluate/index) library. For this task, load the [SacreBLEU](https://huggingface.co/spaces/evaluate-metric/sacrebleu) metric (see the 🤗 Evaluate [quick tour](https://huggingface.co/docs/evaluate/a_quick_tour) to learn more about how to load and compute a metric):
```py
>>> import evaluate
>>> metric = evaluate.load("sacrebleu")
```
Then create a function that passes your predictions and labels to [`~evaluate.EvaluationModule.compute`] to calculate the SacreBLEU score:
```py
>>> import numpy as np
>>> def postprocess_text(preds, labels):
... preds = [pred.strip() for pred in preds]
... labels = [[label.strip()] for label in labels]
... return preds, labels
>>> def compute_metrics(eval_preds):
... preds, labels = eval_preds
... if isinstance(preds, tuple):
... preds = preds[0]
... decoded_preds = tokenizer.batch_decode(preds, skip_special_tokens=True)
... labels = np.where(labels != -100, labels, tokenizer.pad_token_id)
... decoded_labels = tokenizer.batch_decode(labels, skip_special_tokens=True)
... decoded_preds, decoded_labels = postprocess_text(decoded_preds, decoded_labels)
... result = metric.compute(predictions=decoded_preds, references=decoded_labels)
... result = {"bleu": result["score"]}
... prediction_lens = [np.count_nonzero(pred != tokenizer.pad_token_id) for pred in preds]
... result["gen_len"] = np.mean(prediction_lens)
... result = {k: round(v, 4) for k, v in result.items()}
... return result
```
Your `compute_metrics` function is ready to go now, and you'll return to it when you setup your training.
## Train
<frameworkcontent>
<pt>
<Tip>
If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the basic tutorial [here](../training#train-with-pytorch-trainer)!
</Tip>
You're ready to start training your model now! Load T5 with [`AutoModelForSeq2SeqLM`]:
```py
>>> from transformers import AutoModelForSeq2SeqLM, Seq2SeqTrainingArguments, Seq2SeqTrainer
>>> model = AutoModelForSeq2SeqLM.from_pretrained(checkpoint)
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`Seq2SeqTrainingArguments`]. The only required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model). At the end of each epoch, the [`Trainer`] will evaluate the SacreBLEU metric and save the training checkpoint.
2. Pass the training arguments to [`Seq2SeqTrainer`] along with the model, dataset, tokenizer, data collator, and `compute_metrics` function.
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> training_args = Seq2SeqTrainingArguments(
... output_dir="my_awesome_opus_books_model",
... evaluation_strategy="epoch",
... learning_rate=2e-5,
... per_device_train_batch_size=16,
... per_device_eval_batch_size=16,
... weight_decay=0.01,
... save_total_limit=3,
... num_train_epochs=2,
... predict_with_generate=True,
... fp16=True,
... push_to_hub=True,
... )
>>> trainer = Seq2SeqTrainer(
... model=model,
... args=training_args,
... train_dataset=tokenized_books["train"],
... eval_dataset=tokenized_books["test"],
... tokenizer=tokenizer,
... data_collator=data_collator,
... compute_metrics=compute_metrics,
... )
>>> trainer.train()
```
Once training is completed, share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
</pt>
<tf>
<Tip>
If you aren't familiar with finetuning a model with Keras, take a look at the basic tutorial [here](../training#train-a-tensorflow-model-with-keras)!
</Tip>
To finetune a model in TensorFlow, start by setting up an optimizer function, learning rate schedule, and some training hyperparameters:
```py
>>> from transformers import AdamWeightDecay
>>> optimizer = AdamWeightDecay(learning_rate=2e-5, weight_decay_rate=0.01)
```
Then you can load T5 with [`TFAutoModelForSeq2SeqLM`]:
```py
>>> from transformers import TFAutoModelForSeq2SeqLM
>>> model = TFAutoModelForSeq2SeqLM.from_pretrained(checkpoint)
```
Convert your datasets to the `tf.data.Dataset` format with [`~transformers.TFPreTrainedModel.prepare_tf_dataset`]:
```py
>>> tf_train_set = model.prepare_tf_dataset(
... tokenized_books["train"],
... shuffle=True,
... batch_size=16,
... collate_fn=data_collator,
... )
>>> tf_test_set = model.prepare_tf_dataset(
... tokenized_books["test"],
... shuffle=False,
... batch_size=16,
... collate_fn=data_collator,
... )
```
Configure the model for training with [`compile`](https://keras.io/api/models/model_training_apis/#compile-method). Note that Transformers models all have a default task-relevant loss function, so you don't need to specify one unless you want to:
```py
>>> import tensorflow as tf
>>> model.compile(optimizer=optimizer) # No loss argument!
```
The last two things to setup before you start training is to compute the SacreBLEU metric from the predictions, and provide a way to push your model to the Hub. Both are done by using [Keras callbacks](../main_classes/keras_callbacks).
Pass your `compute_metrics` function to [`~transformers.KerasMetricCallback`]:
```py
>>> from transformers.keras_callbacks import KerasMetricCallback
>>> metric_callback = KerasMetricCallback(metric_fn=compute_metrics, eval_dataset=tf_validation_set)
```
Specify where to push your model and tokenizer in the [`~transformers.PushToHubCallback`]:
```py
>>> from transformers.keras_callbacks import PushToHubCallback
>>> push_to_hub_callback = PushToHubCallback(
... output_dir="my_awesome_opus_books_model",
... tokenizer=tokenizer,
... )
```
Then bundle your callbacks together:
```py
>>> callbacks = [metric_callback, push_to_hub_callback]
```
Finally, you're ready to start training your model! Call [`fit`](https://keras.io/api/models/model_training_apis/#fit-method) with your training and validation datasets, the number of epochs, and your callbacks to finetune the model:
```py
>>> model.fit(x=tf_train_set, validation_data=tf_test_set, epochs=3, callbacks=callbacks)
```
Once training is completed, your model is automatically uploaded to the Hub so everyone can use it!
</tf>
</frameworkcontent>
<Tip>
For a more in-depth example of how to finetune a model for translation, take a look at the corresponding
[PyTorch notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/translation.ipynb)
or [TensorFlow notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/translation-tf.ipynb).
</Tip>
## Inference
Great, now that you've finetuned a model, you can use it for inference!
Come up with some text you'd like to translate to another language. For T5, you need to prefix your input depending on the task you're working on. For translation from English to French, you should prefix your input as shown below:
```py
>>> text = "translate English to French: Legumes share resources with nitrogen-fixing bacteria."
```
The simplest way to try out your finetuned model for inference is to use it in a [`pipeline`]. Instantiate a `pipeline` for translation with your model, and pass your text to it:
```py
>>> from transformers import pipeline
>>> translator = pipeline("translation", model="my_awesome_opus_books_model")
>>> translator(text)
[{'translation_text': 'Legumes partagent des ressources avec des bactéries azotantes.'}]
```
You can also manually replicate the results of the `pipeline` if you'd like:
<frameworkcontent>
<pt>
Tokenize the text and return the `input_ids` as PyTorch tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("my_awesome_opus_books_model")
>>> inputs = tokenizer(text, return_tensors="pt").input_ids
```
Use the [`~transformers.generation_utils.GenerationMixin.generate`] method to create the translation. For more details about the different text generation strategies and parameters for controlling generation, check out the [Text Generation](../main_classes/text_generation) API.
```py
>>> from transformers import AutoModelForSeq2SeqLM
>>> model = AutoModelForSeq2SeqLM.from_pretrained("my_awesome_opus_books_model")
>>> outputs = model.generate(inputs, max_new_tokens=40, do_sample=True, top_k=30, top_p=0.95)
```
Decode the generated token ids back into text:
```py
>>> tokenizer.decode(outputs[0], skip_special_tokens=True)
'Les lignées partagent des ressources avec des bactéries enfixant l'azote.'
```
</pt>
<tf>
Tokenize the text and return the `input_ids` as TensorFlow tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("my_awesome_opus_books_model")
>>> inputs = tokenizer(text, return_tensors="tf").input_ids
```
Use the [`~transformers.generation_tf_utils.TFGenerationMixin.generate`] method to create the translation. For more details about the different text generation strategies and parameters for controlling generation, check out the [Text Generation](../main_classes/text_generation) API.
```py
>>> from transformers import TFAutoModelForSeq2SeqLM
>>> model = TFAutoModelForSeq2SeqLM.from_pretrained("my_awesome_opus_books_model")
>>> outputs = model.generate(inputs, max_new_tokens=40, do_sample=True, top_k=30, top_p=0.95)
```
Decode the generated token ids back into text:
```py
>>> tokenizer.decode(outputs[0], skip_special_tokens=True)
'Les lugumes partagent les ressources avec des bactéries fixatrices d'azote.'
```
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/object_detection.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Object detection
[[open-in-colab]]
Object detection is the computer vision task of detecting instances (such as humans, buildings, or cars) in an image. Object detection models receive an image as input and output
coordinates of the bounding boxes and associated labels of the detected objects. An image can contain multiple objects,
each with its own bounding box and a label (e.g. it can have a car and a building), and each object can
be present in different parts of an image (e.g. the image can have several cars).
This task is commonly used in autonomous driving for detecting things like pedestrians, road signs, and traffic lights.
Other applications include counting objects in images, image search, and more.
In this guide, you will learn how to:
1. Finetune [DETR](https://huggingface.co/docs/transformers/model_doc/detr), a model that combines a convolutional
backbone with an encoder-decoder Transformer, on the [CPPE-5](https://huggingface.co/datasets/cppe-5)
dataset.
2. Use your finetuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[Conditional DETR](../model_doc/conditional_detr), [Deformable DETR](../model_doc/deformable_detr), [DETA](../model_doc/deta), [DETR](../model_doc/detr), [Table Transformer](../model_doc/table-transformer), [YOLOS](../model_doc/yolos)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install -q datasets transformers evaluate timm albumentations
```
You'll use 🤗 Datasets to load a dataset from the Hugging Face Hub, 🤗 Transformers to train your model,
and `albumentations` to augment the data. `timm` is currently required to load a convolutional backbone for the DETR model.
We encourage you to share your model with the community. Log in to your Hugging Face account to upload it to the Hub.
When prompted, enter your token to log in:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load the CPPE-5 dataset
The [CPPE-5 dataset](https://huggingface.co/datasets/cppe-5) contains images with
annotations identifying medical personal protective equipment (PPE) in the context of the COVID-19 pandemic.
Start by loading the dataset:
```py
>>> from datasets import load_dataset
>>> cppe5 = load_dataset("cppe-5")
>>> cppe5
DatasetDict({
train: Dataset({
features: ['image_id', 'image', 'width', 'height', 'objects'],
num_rows: 1000
})
test: Dataset({
features: ['image_id', 'image', 'width', 'height', 'objects'],
num_rows: 29
})
})
```
You'll see that this dataset already comes with a training set containing 1000 images and a test set with 29 images.
To get familiar with the data, explore what the examples look like.
```py
>>> cppe5["train"][0]
{'image_id': 15,
'image': <PIL.JpegImagePlugin.JpegImageFile image mode=RGB size=943x663 at 0x7F9EC9E77C10>,
'width': 943,
'height': 663,
'objects': {'id': [114, 115, 116, 117],
'area': [3796, 1596, 152768, 81002],
'bbox': [[302.0, 109.0, 73.0, 52.0],
[810.0, 100.0, 57.0, 28.0],
[160.0, 31.0, 248.0, 616.0],
[741.0, 68.0, 202.0, 401.0]],
'category': [4, 4, 0, 0]}}
```
The examples in the dataset have the following fields:
- `image_id`: the example image id
- `image`: a `PIL.Image.Image` object containing the image
- `width`: width of the image
- `height`: height of the image
- `objects`: a dictionary containing bounding box metadata for the objects in the image:
- `id`: the annotation id
- `area`: the area of the bounding box
- `bbox`: the object's bounding box (in the [COCO format](https://albumentations.ai/docs/getting_started/bounding_boxes_augmentation/#coco) )
- `category`: the object's category, with possible values including `Coverall (0)`, `Face_Shield (1)`, `Gloves (2)`, `Goggles (3)` and `Mask (4)`
You may notice that the `bbox` field follows the COCO format, which is the format that the DETR model expects.
However, the grouping of the fields inside `objects` differs from the annotation format DETR requires. You will
need to apply some preprocessing transformations before using this data for training.
To get an even better understanding of the data, visualize an example in the dataset.
```py
>>> import numpy as np
>>> import os
>>> from PIL import Image, ImageDraw
>>> image = cppe5["train"][0]["image"]
>>> annotations = cppe5["train"][0]["objects"]
>>> draw = ImageDraw.Draw(image)
>>> categories = cppe5["train"].features["objects"].feature["category"].names
>>> id2label = {index: x for index, x in enumerate(categories, start=0)}
>>> label2id = {v: k for k, v in id2label.items()}
>>> for i in range(len(annotations["id"])):
... box = annotations["bbox"][i]
... class_idx = annotations["category"][i]
... x, y, w, h = tuple(box)
... # Check if coordinates are normalized or not
... if max(box) > 1.0:
... # Coordinates are un-normalized, no need to re-scale them
... x1, y1 = int(x), int(y)
... x2, y2 = int(x + w), int(y + h)
... else:
... # Coordinates are normalized, re-scale them
... x1 = int(x * width)
... y1 = int(y * height)
... x2 = int((x + w) * width)
... y2 = int((y + h) * height)
... draw.rectangle((x, y, x + w, y + h), outline="red", width=1)
... draw.text((x, y), id2label[class_idx], fill="white")
>>> image
```
<div class="flex justify-center">
<img src="https://i.imgur.com/TdaqPJO.png" alt="CPPE-5 Image Example"/>
</div>
To visualize the bounding boxes with associated labels, you can get the labels from the dataset's metadata, specifically
the `category` field.
You'll also want to create dictionaries that map a label id to a label class (`id2label`) and the other way around (`label2id`).
You can use them later when setting up the model. Including these maps will make your model reusable by others if you share
it on the Hugging Face Hub. Please note that, the part of above code that draws the bounding boxes assume that it is in `XYWH` (x,y co-ordinates and width and height of the box) format. It might not work for other formats like `(x1, y1, x2, y2)`.
As a final step of getting familiar with the data, explore it for potential issues. One common problem with datasets for
object detection is bounding boxes that "stretch" beyond the edge of the image. Such "runaway" bounding boxes can raise
errors during training and should be addressed at this stage. There are a few examples with this issue in this dataset.
To keep things simple in this guide, we remove these images from the data.
```py
>>> remove_idx = [590, 821, 822, 875, 876, 878, 879]
>>> keep = [i for i in range(len(cppe5["train"])) if i not in remove_idx]
>>> cppe5["train"] = cppe5["train"].select(keep)
```
## Preprocess the data
To finetune a model, you must preprocess the data you plan to use to match precisely the approach used for the pre-trained model.
[`AutoImageProcessor`] takes care of processing image data to create `pixel_values`, `pixel_mask`, and
`labels` that a DETR model can train with. The image processor has some attributes that you won't have to worry about:
- `image_mean = [0.485, 0.456, 0.406 ]`
- `image_std = [0.229, 0.224, 0.225]`
These are the mean and standard deviation used to normalize images during the model pre-training. These values are crucial
to replicate when doing inference or finetuning a pre-trained image model.
Instantiate the image processor from the same checkpoint as the model you want to finetune.
```py
>>> from transformers import AutoImageProcessor
>>> checkpoint = "facebook/detr-resnet-50"
>>> image_processor = AutoImageProcessor.from_pretrained(checkpoint)
```
Before passing the images to the `image_processor`, apply two preprocessing transformations to the dataset:
- Augmenting images
- Reformatting annotations to meet DETR expectations
First, to make sure the model does not overfit on the training data, you can apply image augmentation with any data augmentation library. Here we use [Albumentations](https://albumentations.ai/docs/) ...
This library ensures that transformations affect the image and update the bounding boxes accordingly.
The 🤗 Datasets library documentation has a detailed [guide on how to augment images for object detection](https://huggingface.co/docs/datasets/object_detection),
and it uses the exact same dataset as an example. Apply the same approach here, resize each image to (480, 480),
flip it horizontally, and brighten it:
```py
>>> import albumentations
>>> import numpy as np
>>> import torch
>>> transform = albumentations.Compose(
... [
... albumentations.Resize(480, 480),
... albumentations.HorizontalFlip(p=1.0),
... albumentations.RandomBrightnessContrast(p=1.0),
... ],
... bbox_params=albumentations.BboxParams(format="coco", label_fields=["category"]),
... )
```
The `image_processor` expects the annotations to be in the following format: `{'image_id': int, 'annotations': List[Dict]}`,
where each dictionary is a COCO object annotation. Let's add a function to reformat annotations for a single example:
```py
>>> def formatted_anns(image_id, category, area, bbox):
... annotations = []
... for i in range(0, len(category)):
... new_ann = {
... "image_id": image_id,
... "category_id": category[i],
... "isCrowd": 0,
... "area": area[i],
... "bbox": list(bbox[i]),
... }
... annotations.append(new_ann)
... return annotations
```
Now you can combine the image and annotation transformations to use on a batch of examples:
```py
>>> # transforming a batch
>>> def transform_aug_ann(examples):
... image_ids = examples["image_id"]
... images, bboxes, area, categories = [], [], [], []
... for image, objects in zip(examples["image"], examples["objects"]):
... image = np.array(image.convert("RGB"))[:, :, ::-1]
... out = transform(image=image, bboxes=objects["bbox"], category=objects["category"])
... area.append(objects["area"])
... images.append(out["image"])
... bboxes.append(out["bboxes"])
... categories.append(out["category"])
... targets = [
... {"image_id": id_, "annotations": formatted_anns(id_, cat_, ar_, box_)}
... for id_, cat_, ar_, box_ in zip(image_ids, categories, area, bboxes)
... ]
... return image_processor(images=images, annotations=targets, return_tensors="pt")
```
Apply this preprocessing function to the entire dataset using 🤗 Datasets [`~datasets.Dataset.with_transform`] method. This method applies
transformations on the fly when you load an element of the dataset.
At this point, you can check what an example from the dataset looks like after the transformations. You should see a tensor
with `pixel_values`, a tensor with `pixel_mask`, and `labels`.
```py
>>> cppe5["train"] = cppe5["train"].with_transform(transform_aug_ann)
>>> cppe5["train"][15]
{'pixel_values': tensor([[[ 0.9132, 0.9132, 0.9132, ..., -1.9809, -1.9809, -1.9809],
[ 0.9132, 0.9132, 0.9132, ..., -1.9809, -1.9809, -1.9809],
[ 0.9132, 0.9132, 0.9132, ..., -1.9638, -1.9638, -1.9638],
...,
[-1.5699, -1.5699, -1.5699, ..., -1.9980, -1.9980, -1.9980],
[-1.5528, -1.5528, -1.5528, ..., -1.9980, -1.9809, -1.9809],
[-1.5528, -1.5528, -1.5528, ..., -1.9980, -1.9809, -1.9809]],
[[ 1.3081, 1.3081, 1.3081, ..., -1.8431, -1.8431, -1.8431],
[ 1.3081, 1.3081, 1.3081, ..., -1.8431, -1.8431, -1.8431],
[ 1.3081, 1.3081, 1.3081, ..., -1.8256, -1.8256, -1.8256],
...,
[-1.3179, -1.3179, -1.3179, ..., -1.8606, -1.8606, -1.8606],
[-1.3004, -1.3004, -1.3004, ..., -1.8606, -1.8431, -1.8431],
[-1.3004, -1.3004, -1.3004, ..., -1.8606, -1.8431, -1.8431]],
[[ 1.4200, 1.4200, 1.4200, ..., -1.6476, -1.6476, -1.6476],
[ 1.4200, 1.4200, 1.4200, ..., -1.6476, -1.6476, -1.6476],
[ 1.4200, 1.4200, 1.4200, ..., -1.6302, -1.6302, -1.6302],
...,
[-1.0201, -1.0201, -1.0201, ..., -1.5604, -1.5604, -1.5604],
[-1.0027, -1.0027, -1.0027, ..., -1.5604, -1.5430, -1.5430],
[-1.0027, -1.0027, -1.0027, ..., -1.5604, -1.5430, -1.5430]]]),
'pixel_mask': tensor([[1, 1, 1, ..., 1, 1, 1],
[1, 1, 1, ..., 1, 1, 1],
[1, 1, 1, ..., 1, 1, 1],
...,
[1, 1, 1, ..., 1, 1, 1],
[1, 1, 1, ..., 1, 1, 1],
[1, 1, 1, ..., 1, 1, 1]]),
'labels': {'size': tensor([800, 800]), 'image_id': tensor([756]), 'class_labels': tensor([4]), 'boxes': tensor([[0.7340, 0.6986, 0.3414, 0.5944]]), 'area': tensor([519544.4375]), 'iscrowd': tensor([0]), 'orig_size': tensor([480, 480])}}
```
You have successfully augmented the individual images and prepared their annotations. However, preprocessing isn't
complete yet. In the final step, create a custom `collate_fn` to batch images together.
Pad images (which are now `pixel_values`) to the largest image in a batch, and create a corresponding `pixel_mask`
to indicate which pixels are real (1) and which are padding (0).
```py
>>> def collate_fn(batch):
... pixel_values = [item["pixel_values"] for item in batch]
... encoding = image_processor.pad(pixel_values, return_tensors="pt")
... labels = [item["labels"] for item in batch]
... batch = {}
... batch["pixel_values"] = encoding["pixel_values"]
... batch["pixel_mask"] = encoding["pixel_mask"]
... batch["labels"] = labels
... return batch
```
## Training the DETR model
You have done most of the heavy lifting in the previous sections, so now you are ready to train your model!
The images in this dataset are still quite large, even after resizing. This means that finetuning this model will
require at least one GPU.
Training involves the following steps:
1. Load the model with [`AutoModelForObjectDetection`] using the same checkpoint as in the preprocessing.
2. Define your training hyperparameters in [`TrainingArguments`].
3. Pass the training arguments to [`Trainer`] along with the model, dataset, image processor, and data collator.
4. Call [`~Trainer.train`] to finetune your model.
When loading the model from the same checkpoint that you used for the preprocessing, remember to pass the `label2id`
and `id2label` maps that you created earlier from the dataset's metadata. Additionally, we specify `ignore_mismatched_sizes=True` to replace the existing classification head with a new one.
```py
>>> from transformers import AutoModelForObjectDetection
>>> model = AutoModelForObjectDetection.from_pretrained(
... checkpoint,
... id2label=id2label,
... label2id=label2id,
... ignore_mismatched_sizes=True,
... )
```
In the [`TrainingArguments`] use `output_dir` to specify where to save your model, then configure hyperparameters as you see fit.
It is important you do not remove unused columns because this will drop the image column. Without the image column, you
can't create `pixel_values`. For this reason, set `remove_unused_columns` to `False`.
If you wish to share your model by pushing to the Hub, set `push_to_hub` to `True` (you must be signed in to Hugging
Face to upload your model).
```py
>>> from transformers import TrainingArguments
>>> training_args = TrainingArguments(
... output_dir="detr-resnet-50_finetuned_cppe5",
... per_device_train_batch_size=8,
... num_train_epochs=10,
... fp16=True,
... save_steps=200,
... logging_steps=50,
... learning_rate=1e-5,
... weight_decay=1e-4,
... save_total_limit=2,
... remove_unused_columns=False,
... push_to_hub=True,
... )
```
Finally, bring everything together, and call [`~transformers.Trainer.train`]:
```py
>>> from transformers import Trainer
>>> trainer = Trainer(
... model=model,
... args=training_args,
... data_collator=collate_fn,
... train_dataset=cppe5["train"],
... tokenizer=image_processor,
... )
>>> trainer.train()
```
If you have set `push_to_hub` to `True` in the `training_args`, the training checkpoints are pushed to the
Hugging Face Hub. Upon training completion, push the final model to the Hub as well by calling the [`~transformers.Trainer.push_to_hub`] method.
```py
>>> trainer.push_to_hub()
```
## Evaluate
Object detection models are commonly evaluated with a set of <a href="https://cocodataset.org/#detection-eval">COCO-style metrics</a>.
You can use one of the existing metrics implementations, but here you'll use the one from `torchvision` to evaluate the final
model that you pushed to the Hub.
To use the `torchvision` evaluator, you'll need to prepare a ground truth COCO dataset. The API to build a COCO dataset
requires the data to be stored in a certain format, so you'll need to save images and annotations to disk first. Just like
when you prepared your data for training, the annotations from the `cppe5["test"]` need to be formatted. However, images
should stay as they are.
The evaluation step requires a bit of work, but it can be split in three major steps.
First, prepare the `cppe5["test"]` set: format the annotations and save the data to disk.
```py
>>> import json
>>> # format annotations the same as for training, no need for data augmentation
>>> def val_formatted_anns(image_id, objects):
... annotations = []
... for i in range(0, len(objects["id"])):
... new_ann = {
... "id": objects["id"][i],
... "category_id": objects["category"][i],
... "iscrowd": 0,
... "image_id": image_id,
... "area": objects["area"][i],
... "bbox": objects["bbox"][i],
... }
... annotations.append(new_ann)
... return annotations
>>> # Save images and annotations into the files torchvision.datasets.CocoDetection expects
>>> def save_cppe5_annotation_file_images(cppe5):
... output_json = {}
... path_output_cppe5 = f"{os.getcwd()}/cppe5/"
... if not os.path.exists(path_output_cppe5):
... os.makedirs(path_output_cppe5)
... path_anno = os.path.join(path_output_cppe5, "cppe5_ann.json")
... categories_json = [{"supercategory": "none", "id": id, "name": id2label[id]} for id in id2label]
... output_json["images"] = []
... output_json["annotations"] = []
... for example in cppe5:
... ann = val_formatted_anns(example["image_id"], example["objects"])
... output_json["images"].append(
... {
... "id": example["image_id"],
... "width": example["image"].width,
... "height": example["image"].height,
... "file_name": f"{example['image_id']}.png",
... }
... )
... output_json["annotations"].extend(ann)
... output_json["categories"] = categories_json
... with open(path_anno, "w") as file:
... json.dump(output_json, file, ensure_ascii=False, indent=4)
... for im, img_id in zip(cppe5["image"], cppe5["image_id"]):
... path_img = os.path.join(path_output_cppe5, f"{img_id}.png")
... im.save(path_img)
... return path_output_cppe5, path_anno
```
Next, prepare an instance of a `CocoDetection` class that can be used with `cocoevaluator`.
```py
>>> import torchvision
>>> class CocoDetection(torchvision.datasets.CocoDetection):
... def __init__(self, img_folder, image_processor, ann_file):
... super().__init__(img_folder, ann_file)
... self.image_processor = image_processor
... def __getitem__(self, idx):
... # read in PIL image and target in COCO format
... img, target = super(CocoDetection, self).__getitem__(idx)
... # preprocess image and target: converting target to DETR format,
... # resizing + normalization of both image and target)
... image_id = self.ids[idx]
... target = {"image_id": image_id, "annotations": target}
... encoding = self.image_processor(images=img, annotations=target, return_tensors="pt")
... pixel_values = encoding["pixel_values"].squeeze() # remove batch dimension
... target = encoding["labels"][0] # remove batch dimension
... return {"pixel_values": pixel_values, "labels": target}
>>> im_processor = AutoImageProcessor.from_pretrained("devonho/detr-resnet-50_finetuned_cppe5")
>>> path_output_cppe5, path_anno = save_cppe5_annotation_file_images(cppe5["test"])
>>> test_ds_coco_format = CocoDetection(path_output_cppe5, im_processor, path_anno)
```
Finally, load the metrics and run the evaluation.
```py
>>> import evaluate
>>> from tqdm import tqdm
>>> model = AutoModelForObjectDetection.from_pretrained("devonho/detr-resnet-50_finetuned_cppe5")
>>> module = evaluate.load("ybelkada/cocoevaluate", coco=test_ds_coco_format.coco)
>>> val_dataloader = torch.utils.data.DataLoader(
... test_ds_coco_format, batch_size=8, shuffle=False, num_workers=4, collate_fn=collate_fn
... )
>>> with torch.no_grad():
... for idx, batch in enumerate(tqdm(val_dataloader)):
... pixel_values = batch["pixel_values"]
... pixel_mask = batch["pixel_mask"]
... labels = [
... {k: v for k, v in t.items()} for t in batch["labels"]
... ] # these are in DETR format, resized + normalized
... # forward pass
... outputs = model(pixel_values=pixel_values, pixel_mask=pixel_mask)
... orig_target_sizes = torch.stack([target["orig_size"] for target in labels], dim=0)
... results = im_processor.post_process(outputs, orig_target_sizes) # convert outputs of model to Pascal VOC format (xmin, ymin, xmax, ymax)
... module.add(prediction=results, reference=labels)
... del batch
>>> results = module.compute()
>>> print(results)
Accumulating evaluation results...
DONE (t=0.08s).
IoU metric: bbox
Average Precision (AP) @[ IoU=0.50:0.95 | area= all | maxDets=100 ] = 0.352
Average Precision (AP) @[ IoU=0.50 | area= all | maxDets=100 ] = 0.681
Average Precision (AP) @[ IoU=0.75 | area= all | maxDets=100 ] = 0.292
Average Precision (AP) @[ IoU=0.50:0.95 | area= small | maxDets=100 ] = 0.168
Average Precision (AP) @[ IoU=0.50:0.95 | area=medium | maxDets=100 ] = 0.208
Average Precision (AP) @[ IoU=0.50:0.95 | area= large | maxDets=100 ] = 0.429
Average Recall (AR) @[ IoU=0.50:0.95 | area= all | maxDets= 1 ] = 0.274
Average Recall (AR) @[ IoU=0.50:0.95 | area= all | maxDets= 10 ] = 0.484
Average Recall (AR) @[ IoU=0.50:0.95 | area= all | maxDets=100 ] = 0.501
Average Recall (AR) @[ IoU=0.50:0.95 | area= small | maxDets=100 ] = 0.191
Average Recall (AR) @[ IoU=0.50:0.95 | area=medium | maxDets=100 ] = 0.323
Average Recall (AR) @[ IoU=0.50:0.95 | area= large | maxDets=100 ] = 0.590
```
These results can be further improved by adjusting the hyperparameters in [`~transformers.TrainingArguments`]. Give it a go!
## Inference
Now that you have finetuned a DETR model, evaluated it, and uploaded it to the Hugging Face Hub, you can use it for inference.
The simplest way to try out your finetuned model for inference is to use it in a [`Pipeline`]. Instantiate a pipeline
for object detection with your model, and pass an image to it:
```py
>>> from transformers import pipeline
>>> import requests
>>> url = "https://i.imgur.com/2lnWoly.jpg"
>>> image = Image.open(requests.get(url, stream=True).raw)
>>> obj_detector = pipeline("object-detection", model="devonho/detr-resnet-50_finetuned_cppe5")
>>> obj_detector(image)
```
You can also manually replicate the results of the pipeline if you'd like:
```py
>>> image_processor = AutoImageProcessor.from_pretrained("devonho/detr-resnet-50_finetuned_cppe5")
>>> model = AutoModelForObjectDetection.from_pretrained("devonho/detr-resnet-50_finetuned_cppe5")
>>> with torch.no_grad():
... inputs = image_processor(images=image, return_tensors="pt")
... outputs = model(**inputs)
... target_sizes = torch.tensor([image.size[::-1]])
... results = image_processor.post_process_object_detection(outputs, threshold=0.5, target_sizes=target_sizes)[0]
>>> for score, label, box in zip(results["scores"], results["labels"], results["boxes"]):
... box = [round(i, 2) for i in box.tolist()]
... print(
... f"Detected {model.config.id2label[label.item()]} with confidence "
... f"{round(score.item(), 3)} at location {box}"
... )
Detected Coverall with confidence 0.566 at location [1215.32, 147.38, 4401.81, 3227.08]
Detected Mask with confidence 0.584 at location [2449.06, 823.19, 3256.43, 1413.9]
```
Let's plot the result:
```py
>>> draw = ImageDraw.Draw(image)
>>> for score, label, box in zip(results["scores"], results["labels"], results["boxes"]):
... box = [round(i, 2) for i in box.tolist()]
... x, y, x2, y2 = tuple(box)
... draw.rectangle((x, y, x2, y2), outline="red", width=1)
... draw.text((x, y), model.config.id2label[label.item()], fill="white")
>>> image
```
<div class="flex justify-center">
<img src="https://i.imgur.com/4QZnf9A.png" alt="Object detection result on a new image"/>
</div>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/image_classification.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Image classification
[[open-in-colab]]
<Youtube id="tjAIM7BOYhw"/>
Image classification assigns a label or class to an image. Unlike text or audio classification, the inputs are the
pixel values that comprise an image. There are many applications for image classification, such as detecting damage
after a natural disaster, monitoring crop health, or helping screen medical images for signs of disease.
This guide illustrates how to:
1. Fine-tune [ViT](model_doc/vit) on the [Food-101](https://huggingface.co/datasets/food101) dataset to classify a food item in an image.
2. Use your fine-tuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[BEiT](../model_doc/beit), [BiT](../model_doc/bit), [ConvNeXT](../model_doc/convnext), [ConvNeXTV2](../model_doc/convnextv2), [CvT](../model_doc/cvt), [Data2VecVision](../model_doc/data2vec-vision), [DeiT](../model_doc/deit), [DiNAT](../model_doc/dinat), [DINOv2](../model_doc/dinov2), [EfficientFormer](../model_doc/efficientformer), [EfficientNet](../model_doc/efficientnet), [FocalNet](../model_doc/focalnet), [ImageGPT](../model_doc/imagegpt), [LeViT](../model_doc/levit), [MobileNetV1](../model_doc/mobilenet_v1), [MobileNetV2](../model_doc/mobilenet_v2), [MobileViT](../model_doc/mobilevit), [MobileViTV2](../model_doc/mobilevitv2), [NAT](../model_doc/nat), [Perceiver](../model_doc/perceiver), [PoolFormer](../model_doc/poolformer), [PVT](../model_doc/pvt), [RegNet](../model_doc/regnet), [ResNet](../model_doc/resnet), [SegFormer](../model_doc/segformer), [SwiftFormer](../model_doc/swiftformer), [Swin Transformer](../model_doc/swin), [Swin Transformer V2](../model_doc/swinv2), [VAN](../model_doc/van), [ViT](../model_doc/vit), [ViT Hybrid](../model_doc/vit_hybrid), [ViTMSN](../model_doc/vit_msn)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install transformers datasets evaluate
```
We encourage you to log in to your Hugging Face account to upload and share your model with the community. When prompted, enter your token to log in:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load Food-101 dataset
Start by loading a smaller subset of the Food-101 dataset from the 🤗 Datasets library. This will give you a chance to
experiment and make sure everything works before spending more time training on the full dataset.
```py
>>> from datasets import load_dataset
>>> food = load_dataset("food101", split="train[:5000]")
```
Split the dataset's `train` split into a train and test set with the [`~datasets.Dataset.train_test_split`] method:
```py
>>> food = food.train_test_split(test_size=0.2)
```
Then take a look at an example:
```py
>>> food["train"][0]
{'image': <PIL.JpegImagePlugin.JpegImageFile image mode=RGB size=512x512 at 0x7F52AFC8AC50>,
'label': 79}
```
Each example in the dataset has two fields:
- `image`: a PIL image of the food item
- `label`: the label class of the food item
To make it easier for the model to get the label name from the label id, create a dictionary that maps the label name
to an integer and vice versa:
```py
>>> labels = food["train"].features["label"].names
>>> label2id, id2label = dict(), dict()
>>> for i, label in enumerate(labels):
... label2id[label] = str(i)
... id2label[str(i)] = label
```
Now you can convert the label id to a label name:
```py
>>> id2label[str(79)]
'prime_rib'
```
## Preprocess
The next step is to load a ViT image processor to process the image into a tensor:
```py
>>> from transformers import AutoImageProcessor
>>> checkpoint = "google/vit-base-patch16-224-in21k"
>>> image_processor = AutoImageProcessor.from_pretrained(checkpoint)
```
<frameworkcontent>
<pt>
Apply some image transformations to the images to make the model more robust against overfitting. Here you'll use torchvision's [`transforms`](https://pytorch.org/vision/stable/transforms.html) module, but you can also use any image library you like.
Crop a random part of the image, resize it, and normalize it with the image mean and standard deviation:
```py
>>> from torchvision.transforms import RandomResizedCrop, Compose, Normalize, ToTensor
>>> normalize = Normalize(mean=image_processor.image_mean, std=image_processor.image_std)
>>> size = (
... image_processor.size["shortest_edge"]
... if "shortest_edge" in image_processor.size
... else (image_processor.size["height"], image_processor.size["width"])
... )
>>> _transforms = Compose([RandomResizedCrop(size), ToTensor(), normalize])
```
Then create a preprocessing function to apply the transforms and return the `pixel_values` - the inputs to the model - of the image:
```py
>>> def transforms(examples):
... examples["pixel_values"] = [_transforms(img.convert("RGB")) for img in examples["image"]]
... del examples["image"]
... return examples
```
To apply the preprocessing function over the entire dataset, use 🤗 Datasets [`~datasets.Dataset.with_transform`] method. The transforms are applied on the fly when you load an element of the dataset:
```py
>>> food = food.with_transform(transforms)
```
Now create a batch of examples using [`DefaultDataCollator`]. Unlike other data collators in 🤗 Transformers, the `DefaultDataCollator` does not apply additional preprocessing such as padding.
```py
>>> from transformers import DefaultDataCollator
>>> data_collator = DefaultDataCollator()
```
</pt>
</frameworkcontent>
<frameworkcontent>
<tf>
To avoid overfitting and to make the model more robust, add some data augmentation to the training part of the dataset.
Here we use Keras preprocessing layers to define the transformations for the training data (includes data augmentation),
and transformations for the validation data (only center cropping, resizing and normalizing). You can use `tf.image`or
any other library you prefer.
```py
>>> from tensorflow import keras
>>> from tensorflow.keras import layers
>>> size = (image_processor.size["height"], image_processor.size["width"])
>>> train_data_augmentation = keras.Sequential(
... [
... layers.RandomCrop(size[0], size[1]),
... layers.Rescaling(scale=1.0 / 127.5, offset=-1),
... layers.RandomFlip("horizontal"),
... layers.RandomRotation(factor=0.02),
... layers.RandomZoom(height_factor=0.2, width_factor=0.2),
... ],
... name="train_data_augmentation",
... )
>>> val_data_augmentation = keras.Sequential(
... [
... layers.CenterCrop(size[0], size[1]),
... layers.Rescaling(scale=1.0 / 127.5, offset=-1),
... ],
... name="val_data_augmentation",
... )
```
Next, create functions to apply appropriate transformations to a batch of images, instead of one image at a time.
```py
>>> import numpy as np
>>> import tensorflow as tf
>>> from PIL import Image
>>> def convert_to_tf_tensor(image: Image):
... np_image = np.array(image)
... tf_image = tf.convert_to_tensor(np_image)
... # `expand_dims()` is used to add a batch dimension since
... # the TF augmentation layers operates on batched inputs.
... return tf.expand_dims(tf_image, 0)
>>> def preprocess_train(example_batch):
... """Apply train_transforms across a batch."""
... images = [
... train_data_augmentation(convert_to_tf_tensor(image.convert("RGB"))) for image in example_batch["image"]
... ]
... example_batch["pixel_values"] = [tf.transpose(tf.squeeze(image)) for image in images]
... return example_batch
... def preprocess_val(example_batch):
... """Apply val_transforms across a batch."""
... images = [
... val_data_augmentation(convert_to_tf_tensor(image.convert("RGB"))) for image in example_batch["image"]
... ]
... example_batch["pixel_values"] = [tf.transpose(tf.squeeze(image)) for image in images]
... return example_batch
```
Use 🤗 Datasets [`~datasets.Dataset.set_transform`] to apply the transformations on the fly:
```py
food["train"].set_transform(preprocess_train)
food["test"].set_transform(preprocess_val)
```
As a final preprocessing step, create a batch of examples using `DefaultDataCollator`. Unlike other data collators in 🤗 Transformers, the
`DefaultDataCollator` does not apply additional preprocessing, such as padding.
```py
>>> from transformers import DefaultDataCollator
>>> data_collator = DefaultDataCollator(return_tensors="tf")
```
</tf>
</frameworkcontent>
## Evaluate
Including a metric during training is often helpful for evaluating your model's performance. You can quickly load an
evaluation method with the 🤗 [Evaluate](https://huggingface.co/docs/evaluate/index) library. For this task, load
the [accuracy](https://huggingface.co/spaces/evaluate-metric/accuracy) metric (see the 🤗 Evaluate [quick tour](https://huggingface.co/docs/evaluate/a_quick_tour) to learn more about how to load and compute a metric):
```py
>>> import evaluate
>>> accuracy = evaluate.load("accuracy")
```
Then create a function that passes your predictions and labels to [`~evaluate.EvaluationModule.compute`] to calculate the accuracy:
```py
>>> import numpy as np
>>> def compute_metrics(eval_pred):
... predictions, labels = eval_pred
... predictions = np.argmax(predictions, axis=1)
... return accuracy.compute(predictions=predictions, references=labels)
```
Your `compute_metrics` function is ready to go now, and you'll return to it when you set up your training.
## Train
<frameworkcontent>
<pt>
<Tip>
If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the basic tutorial [here](../training#train-with-pytorch-trainer)!
</Tip>
You're ready to start training your model now! Load ViT with [`AutoModelForImageClassification`]. Specify the number of labels along with the number of expected labels, and the label mappings:
```py
>>> from transformers import AutoModelForImageClassification, TrainingArguments, Trainer
>>> model = AutoModelForImageClassification.from_pretrained(
... checkpoint,
... num_labels=len(labels),
... id2label=id2label,
... label2id=label2id,
... )
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`TrainingArguments`]. It is important you don't remove unused columns because that'll drop the `image` column. Without the `image` column, you can't create `pixel_values`. Set `remove_unused_columns=False` to prevent this behavior! The only other required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model). At the end of each epoch, the [`Trainer`] will evaluate the accuracy and save the training checkpoint.
2. Pass the training arguments to [`Trainer`] along with the model, dataset, tokenizer, data collator, and `compute_metrics` function.
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> training_args = TrainingArguments(
... output_dir="my_awesome_food_model",
... remove_unused_columns=False,
... evaluation_strategy="epoch",
... save_strategy="epoch",
... learning_rate=5e-5,
... per_device_train_batch_size=16,
... gradient_accumulation_steps=4,
... per_device_eval_batch_size=16,
... num_train_epochs=3,
... warmup_ratio=0.1,
... logging_steps=10,
... load_best_model_at_end=True,
... metric_for_best_model="accuracy",
... push_to_hub=True,
... )
>>> trainer = Trainer(
... model=model,
... args=training_args,
... data_collator=data_collator,
... train_dataset=food["train"],
... eval_dataset=food["test"],
... tokenizer=image_processor,
... compute_metrics=compute_metrics,
... )
>>> trainer.train()
```
Once training is completed, share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
</pt>
</frameworkcontent>
<frameworkcontent>
<tf>
<Tip>
If you are unfamiliar with fine-tuning a model with Keras, check out the [basic tutorial](./training#train-a-tensorflow-model-with-keras) first!
</Tip>
To fine-tune a model in TensorFlow, follow these steps:
1. Define the training hyperparameters, and set up an optimizer and a learning rate schedule.
2. Instantiate a pre-trained model.
3. Convert a 🤗 Dataset to a `tf.data.Dataset`.
4. Compile your model.
5. Add callbacks and use the `fit()` method to run the training.
6. Upload your model to 🤗 Hub to share with the community.
Start by defining the hyperparameters, optimizer and learning rate schedule:
```py
>>> from transformers import create_optimizer
>>> batch_size = 16
>>> num_epochs = 5
>>> num_train_steps = len(food["train"]) * num_epochs
>>> learning_rate = 3e-5
>>> weight_decay_rate = 0.01
>>> optimizer, lr_schedule = create_optimizer(
... init_lr=learning_rate,
... num_train_steps=num_train_steps,
... weight_decay_rate=weight_decay_rate,
... num_warmup_steps=0,
... )
```
Then, load ViT with [`TFAutoModelForImageClassification`] along with the label mappings:
```py
>>> from transformers import TFAutoModelForImageClassification
>>> model = TFAutoModelForImageClassification.from_pretrained(
... checkpoint,
... id2label=id2label,
... label2id=label2id,
... )
```
Convert your datasets to the `tf.data.Dataset` format using the [`~datasets.Dataset.to_tf_dataset`] and your `data_collator`:
```py
>>> # converting our train dataset to tf.data.Dataset
>>> tf_train_dataset = food["train"].to_tf_dataset(
... columns="pixel_values", label_cols="label", shuffle=True, batch_size=batch_size, collate_fn=data_collator
... )
>>> # converting our test dataset to tf.data.Dataset
>>> tf_eval_dataset = food["test"].to_tf_dataset(
... columns="pixel_values", label_cols="label", shuffle=True, batch_size=batch_size, collate_fn=data_collator
... )
```
Configure the model for training with `compile()`:
```py
>>> from tensorflow.keras.losses import SparseCategoricalCrossentropy
>>> loss = tf.keras.losses.SparseCategoricalCrossentropy(from_logits=True)
>>> model.compile(optimizer=optimizer, loss=loss)
```
To compute the accuracy from the predictions and push your model to the 🤗 Hub, use [Keras callbacks](../main_classes/keras_callbacks).
Pass your `compute_metrics` function to [KerasMetricCallback](../main_classes/keras_callbacks#transformers.KerasMetricCallback),
and use the [PushToHubCallback](../main_classes/keras_callbacks#transformers.PushToHubCallback) to upload the model:
```py
>>> from transformers.keras_callbacks import KerasMetricCallback, PushToHubCallback
>>> metric_callback = KerasMetricCallback(metric_fn=compute_metrics, eval_dataset=tf_eval_dataset)
>>> push_to_hub_callback = PushToHubCallback(
... output_dir="food_classifier",
... tokenizer=image_processor,
... save_strategy="no",
... )
>>> callbacks = [metric_callback, push_to_hub_callback]
```
Finally, you are ready to train your model! Call `fit()` with your training and validation datasets, the number of epochs,
and your callbacks to fine-tune the model:
```py
>>> model.fit(tf_train_dataset, validation_data=tf_eval_dataset, epochs=num_epochs, callbacks=callbacks)
Epoch 1/5
250/250 [==============================] - 313s 1s/step - loss: 2.5623 - val_loss: 1.4161 - accuracy: 0.9290
Epoch 2/5
250/250 [==============================] - 265s 1s/step - loss: 0.9181 - val_loss: 0.6808 - accuracy: 0.9690
Epoch 3/5
250/250 [==============================] - 252s 1s/step - loss: 0.3910 - val_loss: 0.4303 - accuracy: 0.9820
Epoch 4/5
250/250 [==============================] - 251s 1s/step - loss: 0.2028 - val_loss: 0.3191 - accuracy: 0.9900
Epoch 5/5
250/250 [==============================] - 238s 949ms/step - loss: 0.1232 - val_loss: 0.3259 - accuracy: 0.9890
```
Congratulations! You have fine-tuned your model and shared it on the 🤗 Hub. You can now use it for inference!
</tf>
</frameworkcontent>
<Tip>
For a more in-depth example of how to finetune a model for image classification, take a look at the corresponding [PyTorch notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/image_classification.ipynb).
</Tip>
## Inference
Great, now that you've fine-tuned a model, you can use it for inference!
Load an image you'd like to run inference on:
```py
>>> ds = load_dataset("food101", split="validation[:10]")
>>> image = ds["image"][0]
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/beignets-task-guide.png" alt="image of beignets"/>
</div>
The simplest way to try out your finetuned model for inference is to use it in a [`pipeline`]. Instantiate a `pipeline` for image classification with your model, and pass your image to it:
```py
>>> from transformers import pipeline
>>> classifier = pipeline("image-classification", model="my_awesome_food_model")
>>> classifier(image)
[{'score': 0.31856709718704224, 'label': 'beignets'},
{'score': 0.015232225880026817, 'label': 'bruschetta'},
{'score': 0.01519392803311348, 'label': 'chicken_wings'},
{'score': 0.013022331520915031, 'label': 'pork_chop'},
{'score': 0.012728818692266941, 'label': 'prime_rib'}]
```
You can also manually replicate the results of the `pipeline` if you'd like:
<frameworkcontent>
<pt>
Load an image processor to preprocess the image and return the `input` as PyTorch tensors:
```py
>>> from transformers import AutoImageProcessor
>>> import torch
>>> image_processor = AutoImageProcessor.from_pretrained("my_awesome_food_model")
>>> inputs = image_processor(image, return_tensors="pt")
```
Pass your inputs to the model and return the logits:
```py
>>> from transformers import AutoModelForImageClassification
>>> model = AutoModelForImageClassification.from_pretrained("my_awesome_food_model")
>>> with torch.no_grad():
... logits = model(**inputs).logits
```
Get the predicted label with the highest probability, and use the model's `id2label` mapping to convert it to a label:
```py
>>> predicted_label = logits.argmax(-1).item()
>>> model.config.id2label[predicted_label]
'beignets'
```
</pt>
</frameworkcontent>
<frameworkcontent>
<tf>
Load an image processor to preprocess the image and return the `input` as TensorFlow tensors:
```py
>>> from transformers import AutoImageProcessor
>>> image_processor = AutoImageProcessor.from_pretrained("MariaK/food_classifier")
>>> inputs = image_processor(image, return_tensors="tf")
```
Pass your inputs to the model and return the logits:
```py
>>> from transformers import TFAutoModelForImageClassification
>>> model = TFAutoModelForImageClassification.from_pretrained("MariaK/food_classifier")
>>> logits = model(**inputs).logits
```
Get the predicted label with the highest probability, and use the model's `id2label` mapping to convert it to a label:
```py
>>> predicted_class_id = int(tf.math.argmax(logits, axis=-1)[0])
>>> model.config.id2label[predicted_class_id]
'beignets'
```
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/sequence_classification.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Text classification
[[open-in-colab]]
<Youtube id="leNG9fN9FQU"/>
Text classification is a common NLP task that assigns a label or class to text. Some of the largest companies run text classification in production for a wide range of practical applications. One of the most popular forms of text classification is sentiment analysis, which assigns a label like 🙂 positive, 🙁 negative, or 😐 neutral to a sequence of text.
This guide will show you how to:
1. Finetune [DistilBERT](https://huggingface.co/distilbert-base-uncased) on the [IMDb](https://huggingface.co/datasets/imdb) dataset to determine whether a movie review is positive or negative.
2. Use your finetuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[ALBERT](../model_doc/albert), [BART](../model_doc/bart), [BERT](../model_doc/bert), [BigBird](../model_doc/big_bird), [BigBird-Pegasus](../model_doc/bigbird_pegasus), [BioGpt](../model_doc/biogpt), [BLOOM](../model_doc/bloom), [CamemBERT](../model_doc/camembert), [CANINE](../model_doc/canine), [CodeLlama](../model_doc/code_llama), [ConvBERT](../model_doc/convbert), [CTRL](../model_doc/ctrl), [Data2VecText](../model_doc/data2vec-text), [DeBERTa](../model_doc/deberta), [DeBERTa-v2](../model_doc/deberta-v2), [DistilBERT](../model_doc/distilbert), [ELECTRA](../model_doc/electra), [ERNIE](../model_doc/ernie), [ErnieM](../model_doc/ernie_m), [ESM](../model_doc/esm), [Falcon](../model_doc/falcon), [FlauBERT](../model_doc/flaubert), [FNet](../model_doc/fnet), [Funnel Transformer](../model_doc/funnel), [GPT-Sw3](../model_doc/gpt-sw3), [OpenAI GPT-2](../model_doc/gpt2), [GPTBigCode](../model_doc/gpt_bigcode), [GPT Neo](../model_doc/gpt_neo), [GPT NeoX](../model_doc/gpt_neox), [GPT-J](../model_doc/gptj), [I-BERT](../model_doc/ibert), [LayoutLM](../model_doc/layoutlm), [LayoutLMv2](../model_doc/layoutlmv2), [LayoutLMv3](../model_doc/layoutlmv3), [LED](../model_doc/led), [LiLT](../model_doc/lilt), [LLaMA](../model_doc/llama), [Longformer](../model_doc/longformer), [LUKE](../model_doc/luke), [MarkupLM](../model_doc/markuplm), [mBART](../model_doc/mbart), [MEGA](../model_doc/mega), [Megatron-BERT](../model_doc/megatron-bert), [Mistral](../model_doc/mistral), [Mixtral](../model_doc/mixtral), [MobileBERT](../model_doc/mobilebert), [MPNet](../model_doc/mpnet), [MPT](../model_doc/mpt), [MRA](../model_doc/mra), [MT5](../model_doc/mt5), [MVP](../model_doc/mvp), [Nezha](../model_doc/nezha), [Nyströmformer](../model_doc/nystromformer), [OpenLlama](../model_doc/open-llama), [OpenAI GPT](../model_doc/openai-gpt), [OPT](../model_doc/opt), [Perceiver](../model_doc/perceiver), [Persimmon](../model_doc/persimmon), [Phi](../model_doc/phi), [PLBart](../model_doc/plbart), [QDQBert](../model_doc/qdqbert), [Reformer](../model_doc/reformer), [RemBERT](../model_doc/rembert), [RoBERTa](../model_doc/roberta), [RoBERTa-PreLayerNorm](../model_doc/roberta-prelayernorm), [RoCBert](../model_doc/roc_bert), [RoFormer](../model_doc/roformer), [SqueezeBERT](../model_doc/squeezebert), [T5](../model_doc/t5), [TAPAS](../model_doc/tapas), [Transformer-XL](../model_doc/transfo-xl), [UMT5](../model_doc/umt5), [XLM](../model_doc/xlm), [XLM-RoBERTa](../model_doc/xlm-roberta), [XLM-RoBERTa-XL](../model_doc/xlm-roberta-xl), [XLNet](../model_doc/xlnet), [X-MOD](../model_doc/xmod), [YOSO](../model_doc/yoso)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install transformers datasets evaluate accelerate
```
We encourage you to login to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to login:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load IMDb dataset
Start by loading the IMDb dataset from the 🤗 Datasets library:
```py
>>> from datasets import load_dataset
>>> imdb = load_dataset("imdb")
```
Then take a look at an example:
```py
>>> imdb["test"][0]
{
"label": 0,
"text": "I love sci-fi and am willing to put up with a lot. Sci-fi movies/TV are usually underfunded, under-appreciated and misunderstood. I tried to like this, I really did, but it is to good TV sci-fi as Babylon 5 is to Star Trek (the original). Silly prosthetics, cheap cardboard sets, stilted dialogues, CG that doesn't match the background, and painfully one-dimensional characters cannot be overcome with a 'sci-fi' setting. (I'm sure there are those of you out there who think Babylon 5 is good sci-fi TV. It's not. It's clichéd and uninspiring.) While US viewers might like emotion and character development, sci-fi is a genre that does not take itself seriously (cf. Star Trek). It may treat important issues, yet not as a serious philosophy. It's really difficult to care about the characters here as they are not simply foolish, just missing a spark of life. Their actions and reactions are wooden and predictable, often painful to watch. The makers of Earth KNOW it's rubbish as they have to always say \"Gene Roddenberry's Earth...\" otherwise people would not continue watching. Roddenberry's ashes must be turning in their orbit as this dull, cheap, poorly edited (watching it without advert breaks really brings this home) trudging Trabant of a show lumbers into space. Spoiler. So, kill off a main character. And then bring him back as another actor. Jeeez! Dallas all over again.",
}
```
There are two fields in this dataset:
- `text`: the movie review text.
- `label`: a value that is either `0` for a negative review or `1` for a positive review.
## Preprocess
The next step is to load a DistilBERT tokenizer to preprocess the `text` field:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("distilbert-base-uncased")
```
Create a preprocessing function to tokenize `text` and truncate sequences to be no longer than DistilBERT's maximum input length:
```py
>>> def preprocess_function(examples):
... return tokenizer(examples["text"], truncation=True)
```
To apply the preprocessing function over the entire dataset, use 🤗 Datasets [`~datasets.Dataset.map`] function. You can speed up `map` by setting `batched=True` to process multiple elements of the dataset at once:
```py
tokenized_imdb = imdb.map(preprocess_function, batched=True)
```
Now create a batch of examples using [`DataCollatorWithPadding`]. It's more efficient to *dynamically pad* the sentences to the longest length in a batch during collation, instead of padding the whole dataset to the maximum length.
<frameworkcontent>
<pt>
```py
>>> from transformers import DataCollatorWithPadding
>>> data_collator = DataCollatorWithPadding(tokenizer=tokenizer)
```
</pt>
<tf>
```py
>>> from transformers import DataCollatorWithPadding
>>> data_collator = DataCollatorWithPadding(tokenizer=tokenizer, return_tensors="tf")
```
</tf>
</frameworkcontent>
## Evaluate
Including a metric during training is often helpful for evaluating your model's performance. You can quickly load a evaluation method with the 🤗 [Evaluate](https://huggingface.co/docs/evaluate/index) library. For this task, load the [accuracy](https://huggingface.co/spaces/evaluate-metric/accuracy) metric (see the 🤗 Evaluate [quick tour](https://huggingface.co/docs/evaluate/a_quick_tour) to learn more about how to load and compute a metric):
```py
>>> import evaluate
>>> accuracy = evaluate.load("accuracy")
```
Then create a function that passes your predictions and labels to [`~evaluate.EvaluationModule.compute`] to calculate the accuracy:
```py
>>> import numpy as np
>>> def compute_metrics(eval_pred):
... predictions, labels = eval_pred
... predictions = np.argmax(predictions, axis=1)
... return accuracy.compute(predictions=predictions, references=labels)
```
Your `compute_metrics` function is ready to go now, and you'll return to it when you setup your training.
## Train
Before you start training your model, create a map of the expected ids to their labels with `id2label` and `label2id`:
```py
>>> id2label = {0: "NEGATIVE", 1: "POSITIVE"}
>>> label2id = {"NEGATIVE": 0, "POSITIVE": 1}
```
<frameworkcontent>
<pt>
<Tip>
If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the basic tutorial [here](../training#train-with-pytorch-trainer)!
</Tip>
You're ready to start training your model now! Load DistilBERT with [`AutoModelForSequenceClassification`] along with the number of expected labels, and the label mappings:
```py
>>> from transformers import AutoModelForSequenceClassification, TrainingArguments, Trainer
>>> model = AutoModelForSequenceClassification.from_pretrained(
... "distilbert-base-uncased", num_labels=2, id2label=id2label, label2id=label2id
... )
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`TrainingArguments`]. The only required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model). At the end of each epoch, the [`Trainer`] will evaluate the accuracy and save the training checkpoint.
2. Pass the training arguments to [`Trainer`] along with the model, dataset, tokenizer, data collator, and `compute_metrics` function.
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> training_args = TrainingArguments(
... output_dir="my_awesome_model",
... learning_rate=2e-5,
... per_device_train_batch_size=16,
... per_device_eval_batch_size=16,
... num_train_epochs=2,
... weight_decay=0.01,
... evaluation_strategy="epoch",
... save_strategy="epoch",
... load_best_model_at_end=True,
... push_to_hub=True,
... )
>>> trainer = Trainer(
... model=model,
... args=training_args,
... train_dataset=tokenized_imdb["train"],
... eval_dataset=tokenized_imdb["test"],
... tokenizer=tokenizer,
... data_collator=data_collator,
... compute_metrics=compute_metrics,
... )
>>> trainer.train()
```
<Tip>
[`Trainer`] applies dynamic padding by default when you pass `tokenizer` to it. In this case, you don't need to specify a data collator explicitly.
</Tip>
Once training is completed, share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
</pt>
<tf>
<Tip>
If you aren't familiar with finetuning a model with Keras, take a look at the basic tutorial [here](../training#train-a-tensorflow-model-with-keras)!
</Tip>
To finetune a model in TensorFlow, start by setting up an optimizer function, learning rate schedule, and some training hyperparameters:
```py
>>> from transformers import create_optimizer
>>> import tensorflow as tf
>>> batch_size = 16
>>> num_epochs = 5
>>> batches_per_epoch = len(tokenized_imdb["train"]) // batch_size
>>> total_train_steps = int(batches_per_epoch * num_epochs)
>>> optimizer, schedule = create_optimizer(init_lr=2e-5, num_warmup_steps=0, num_train_steps=total_train_steps)
```
Then you can load DistilBERT with [`TFAutoModelForSequenceClassification`] along with the number of expected labels, and the label mappings:
```py
>>> from transformers import TFAutoModelForSequenceClassification
>>> model = TFAutoModelForSequenceClassification.from_pretrained(
... "distilbert-base-uncased", num_labels=2, id2label=id2label, label2id=label2id
... )
```
Convert your datasets to the `tf.data.Dataset` format with [`~transformers.TFPreTrainedModel.prepare_tf_dataset`]:
```py
>>> tf_train_set = model.prepare_tf_dataset(
... tokenized_imdb["train"],
... shuffle=True,
... batch_size=16,
... collate_fn=data_collator,
... )
>>> tf_validation_set = model.prepare_tf_dataset(
... tokenized_imdb["test"],
... shuffle=False,
... batch_size=16,
... collate_fn=data_collator,
... )
```
Configure the model for training with [`compile`](https://keras.io/api/models/model_training_apis/#compile-method). Note that Transformers models all have a default task-relevant loss function, so you don't need to specify one unless you want to:
```py
>>> import tensorflow as tf
>>> model.compile(optimizer=optimizer) # No loss argument!
```
The last two things to setup before you start training is to compute the accuracy from the predictions, and provide a way to push your model to the Hub. Both are done by using [Keras callbacks](../main_classes/keras_callbacks).
Pass your `compute_metrics` function to [`~transformers.KerasMetricCallback`]:
```py
>>> from transformers.keras_callbacks import KerasMetricCallback
>>> metric_callback = KerasMetricCallback(metric_fn=compute_metrics, eval_dataset=tf_validation_set)
```
Specify where to push your model and tokenizer in the [`~transformers.PushToHubCallback`]:
```py
>>> from transformers.keras_callbacks import PushToHubCallback
>>> push_to_hub_callback = PushToHubCallback(
... output_dir="my_awesome_model",
... tokenizer=tokenizer,
... )
```
Then bundle your callbacks together:
```py
>>> callbacks = [metric_callback, push_to_hub_callback]
```
Finally, you're ready to start training your model! Call [`fit`](https://keras.io/api/models/model_training_apis/#fit-method) with your training and validation datasets, the number of epochs, and your callbacks to finetune the model:
```py
>>> model.fit(x=tf_train_set, validation_data=tf_validation_set, epochs=3, callbacks=callbacks)
```
Once training is completed, your model is automatically uploaded to the Hub so everyone can use it!
</tf>
</frameworkcontent>
<Tip>
For a more in-depth example of how to finetune a model for text classification, take a look at the corresponding
[PyTorch notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification.ipynb)
or [TensorFlow notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification-tf.ipynb).
</Tip>
## Inference
Great, now that you've finetuned a model, you can use it for inference!
Grab some text you'd like to run inference on:
```py
>>> text = "This was a masterpiece. Not completely faithful to the books, but enthralling from beginning to end. Might be my favorite of the three."
```
The simplest way to try out your finetuned model for inference is to use it in a [`pipeline`]. Instantiate a `pipeline` for sentiment analysis with your model, and pass your text to it:
```py
>>> from transformers import pipeline
>>> classifier = pipeline("sentiment-analysis", model="stevhliu/my_awesome_model")
>>> classifier(text)
[{'label': 'POSITIVE', 'score': 0.9994940757751465}]
```
You can also manually replicate the results of the `pipeline` if you'd like:
<frameworkcontent>
<pt>
Tokenize the text and return PyTorch tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("stevhliu/my_awesome_model")
>>> inputs = tokenizer(text, return_tensors="pt")
```
Pass your inputs to the model and return the `logits`:
```py
>>> from transformers import AutoModelForSequenceClassification
>>> model = AutoModelForSequenceClassification.from_pretrained("stevhliu/my_awesome_model")
>>> with torch.no_grad():
... logits = model(**inputs).logits
```
Get the class with the highest probability, and use the model's `id2label` mapping to convert it to a text label:
```py
>>> predicted_class_id = logits.argmax().item()
>>> model.config.id2label[predicted_class_id]
'POSITIVE'
```
</pt>
<tf>
Tokenize the text and return TensorFlow tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("stevhliu/my_awesome_model")
>>> inputs = tokenizer(text, return_tensors="tf")
```
Pass your inputs to the model and return the `logits`:
```py
>>> from transformers import TFAutoModelForSequenceClassification
>>> model = TFAutoModelForSequenceClassification.from_pretrained("stevhliu/my_awesome_model")
>>> logits = model(**inputs).logits
```
Get the class with the highest probability, and use the model's `id2label` mapping to convert it to a text label:
```py
>>> predicted_class_id = int(tf.math.argmax(logits, axis=-1)[0])
>>> model.config.id2label[predicted_class_id]
'POSITIVE'
```
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/language_modeling.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Causal language modeling
[[open-in-colab]]
There are two types of language modeling, causal and masked. This guide illustrates causal language modeling.
Causal language models are frequently used for text generation. You can use these models for creative applications like
choosing your own text adventure or an intelligent coding assistant like Copilot or CodeParrot.
<Youtube id="Vpjb1lu0MDk"/>
Causal language modeling predicts the next token in a sequence of tokens, and the model can only attend to tokens on
the left. This means the model cannot see future tokens. GPT-2 is an example of a causal language model.
This guide will show you how to:
1. Finetune [DistilGPT2](https://huggingface.co/distilgpt2) on the [r/askscience](https://www.reddit.com/r/askscience/) subset of the [ELI5](https://huggingface.co/datasets/eli5) dataset.
2. Use your finetuned model for inference.
<Tip>
You can finetune other architectures for causal language modeling following the same steps in this guide.
Choose one of the following architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[BART](../model_doc/bart), [BERT](../model_doc/bert), [Bert Generation](../model_doc/bert-generation), [BigBird](../model_doc/big_bird), [BigBird-Pegasus](../model_doc/bigbird_pegasus), [BioGpt](../model_doc/biogpt), [Blenderbot](../model_doc/blenderbot), [BlenderbotSmall](../model_doc/blenderbot-small), [BLOOM](../model_doc/bloom), [CamemBERT](../model_doc/camembert), [CodeLlama](../model_doc/code_llama), [CodeGen](../model_doc/codegen), [CPM-Ant](../model_doc/cpmant), [CTRL](../model_doc/ctrl), [Data2VecText](../model_doc/data2vec-text), [ELECTRA](../model_doc/electra), [ERNIE](../model_doc/ernie), [Falcon](../model_doc/falcon), [Fuyu](../model_doc/fuyu), [GIT](../model_doc/git), [GPT-Sw3](../model_doc/gpt-sw3), [OpenAI GPT-2](../model_doc/gpt2), [GPTBigCode](../model_doc/gpt_bigcode), [GPT Neo](../model_doc/gpt_neo), [GPT NeoX](../model_doc/gpt_neox), [GPT NeoX Japanese](../model_doc/gpt_neox_japanese), [GPT-J](../model_doc/gptj), [LLaMA](../model_doc/llama), [Marian](../model_doc/marian), [mBART](../model_doc/mbart), [MEGA](../model_doc/mega), [Megatron-BERT](../model_doc/megatron-bert), [Mistral](../model_doc/mistral), [Mixtral](../model_doc/mixtral), [MPT](../model_doc/mpt), [MusicGen](../model_doc/musicgen), [MVP](../model_doc/mvp), [OpenLlama](../model_doc/open-llama), [OpenAI GPT](../model_doc/openai-gpt), [OPT](../model_doc/opt), [Pegasus](../model_doc/pegasus), [Persimmon](../model_doc/persimmon), [Phi](../model_doc/phi), [PLBart](../model_doc/plbart), [ProphetNet](../model_doc/prophetnet), [QDQBert](../model_doc/qdqbert), [Reformer](../model_doc/reformer), [RemBERT](../model_doc/rembert), [RoBERTa](../model_doc/roberta), [RoBERTa-PreLayerNorm](../model_doc/roberta-prelayernorm), [RoCBert](../model_doc/roc_bert), [RoFormer](../model_doc/roformer), [RWKV](../model_doc/rwkv), [Speech2Text2](../model_doc/speech_to_text_2), [Transformer-XL](../model_doc/transfo-xl), [TrOCR](../model_doc/trocr), [Whisper](../model_doc/whisper), [XGLM](../model_doc/xglm), [XLM](../model_doc/xlm), [XLM-ProphetNet](../model_doc/xlm-prophetnet), [XLM-RoBERTa](../model_doc/xlm-roberta), [XLM-RoBERTa-XL](../model_doc/xlm-roberta-xl), [XLNet](../model_doc/xlnet), [X-MOD](../model_doc/xmod)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install transformers datasets evaluate
```
We encourage you to log in to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to log in:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load ELI5 dataset
Start by loading a smaller subset of the r/askscience subset of the ELI5 dataset from the 🤗 Datasets library.
This'll give you a chance to experiment and make sure everything works before spending more time training on the full dataset.
```py
>>> from datasets import load_dataset
>>> eli5 = load_dataset("eli5", split="train_asks[:5000]")
```
Split the dataset's `train_asks` split into a train and test set with the [`~datasets.Dataset.train_test_split`] method:
```py
>>> eli5 = eli5.train_test_split(test_size=0.2)
```
Then take a look at an example:
```py
>>> eli5["train"][0]
{'answers': {'a_id': ['c3d1aib', 'c3d4lya'],
'score': [6, 3],
'text': ["The velocity needed to remain in orbit is equal to the square root of Newton's constant times the mass of earth divided by the distance from the center of the earth. I don't know the altitude of that specific mission, but they're usually around 300 km. That means he's going 7-8 km/s.\n\nIn space there are no other forces acting on either the shuttle or the guy, so they stay in the same position relative to each other. If he were to become unable to return to the ship, he would presumably run out of oxygen, or slowly fall into the atmosphere and burn up.",
"Hope you don't mind me asking another question, but why aren't there any stars visible in this photo?"]},
'answers_urls': {'url': []},
'document': '',
'q_id': 'nyxfp',
'selftext': '_URL_0_\n\nThis was on the front page earlier and I have a few questions about it. Is it possible to calculate how fast the astronaut would be orbiting the earth? Also how does he stay close to the shuttle so that he can return safely, i.e is he orbiting at the same speed and can therefore stay next to it? And finally if his propulsion system failed, would he eventually re-enter the atmosphere and presumably die?',
'selftext_urls': {'url': ['http://apod.nasa.gov/apod/image/1201/freeflyer_nasa_3000.jpg']},
'subreddit': 'askscience',
'title': 'Few questions about this space walk photograph.',
'title_urls': {'url': []}}
```
While this may look like a lot, you're only really interested in the `text` field. What's cool about language modeling
tasks is you don't need labels (also known as an unsupervised task) because the next word *is* the label.
## Preprocess
<Youtube id="ma1TrR7gE7I"/>
The next step is to load a DistilGPT2 tokenizer to process the `text` subfield:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("distilgpt2")
```
You'll notice from the example above, the `text` field is actually nested inside `answers`. This means you'll need to
extract the `text` subfield from its nested structure with the [`flatten`](https://huggingface.co/docs/datasets/process#flatten) method:
```py
>>> eli5 = eli5.flatten()
>>> eli5["train"][0]
{'answers.a_id': ['c3d1aib', 'c3d4lya'],
'answers.score': [6, 3],
'answers.text': ["The velocity needed to remain in orbit is equal to the square root of Newton's constant times the mass of earth divided by the distance from the center of the earth. I don't know the altitude of that specific mission, but they're usually around 300 km. That means he's going 7-8 km/s.\n\nIn space there are no other forces acting on either the shuttle or the guy, so they stay in the same position relative to each other. If he were to become unable to return to the ship, he would presumably run out of oxygen, or slowly fall into the atmosphere and burn up.",
"Hope you don't mind me asking another question, but why aren't there any stars visible in this photo?"],
'answers_urls.url': [],
'document': '',
'q_id': 'nyxfp',
'selftext': '_URL_0_\n\nThis was on the front page earlier and I have a few questions about it. Is it possible to calculate how fast the astronaut would be orbiting the earth? Also how does he stay close to the shuttle so that he can return safely, i.e is he orbiting at the same speed and can therefore stay next to it? And finally if his propulsion system failed, would he eventually re-enter the atmosphere and presumably die?',
'selftext_urls.url': ['http://apod.nasa.gov/apod/image/1201/freeflyer_nasa_3000.jpg'],
'subreddit': 'askscience',
'title': 'Few questions about this space walk photograph.',
'title_urls.url': []}
```
Each subfield is now a separate column as indicated by the `answers` prefix, and the `text` field is a list now. Instead
of tokenizing each sentence separately, convert the list to a string so you can jointly tokenize them.
Here is a first preprocessing function to join the list of strings for each example and tokenize the result:
```py
>>> def preprocess_function(examples):
... return tokenizer([" ".join(x) for x in examples["answers.text"]])
```
To apply this preprocessing function over the entire dataset, use the 🤗 Datasets [`~datasets.Dataset.map`] method. You can speed up the `map` function by setting `batched=True` to process multiple elements of the dataset at once, and increasing the number of processes with `num_proc`. Remove any columns you don't need:
```py
>>> tokenized_eli5 = eli5.map(
... preprocess_function,
... batched=True,
... num_proc=4,
... remove_columns=eli5["train"].column_names,
... )
```
This dataset contains the token sequences, but some of these are longer than the maximum input length for the model.
You can now use a second preprocessing function to
- concatenate all the sequences
- split the concatenated sequences into shorter chunks defined by `block_size`, which should be both shorter than the maximum input length and short enough for your GPU RAM.
```py
>>> block_size = 128
>>> def group_texts(examples):
... # Concatenate all texts.
... concatenated_examples = {k: sum(examples[k], []) for k in examples.keys()}
... total_length = len(concatenated_examples[list(examples.keys())[0]])
... # We drop the small remainder, we could add padding if the model supported it instead of this drop, you can
... # customize this part to your needs.
... if total_length >= block_size:
... total_length = (total_length // block_size) * block_size
... # Split by chunks of block_size.
... result = {
... k: [t[i : i + block_size] for i in range(0, total_length, block_size)]
... for k, t in concatenated_examples.items()
... }
... result["labels"] = result["input_ids"].copy()
... return result
```
Apply the `group_texts` function over the entire dataset:
```py
>>> lm_dataset = tokenized_eli5.map(group_texts, batched=True, num_proc=4)
```
Now create a batch of examples using [`DataCollatorForLanguageModeling`]. It's more efficient to *dynamically pad* the
sentences to the longest length in a batch during collation, instead of padding the whole dataset to the maximum length.
<frameworkcontent>
<pt>
Use the end-of-sequence token as the padding token and set `mlm=False`. This will use the inputs as labels shifted to the right by one element:
```py
>>> from transformers import DataCollatorForLanguageModeling
>>> tokenizer.pad_token = tokenizer.eos_token
>>> data_collator = DataCollatorForLanguageModeling(tokenizer=tokenizer, mlm=False)
```
</pt>
<tf>
Use the end-of-sequence token as the padding token and set `mlm=False`. This will use the inputs as labels shifted to the right by one element:
```py
>>> from transformers import DataCollatorForLanguageModeling
>>> data_collator = DataCollatorForLanguageModeling(tokenizer=tokenizer, mlm=False, return_tensors="tf")
```
</tf>
</frameworkcontent>
## Train
<frameworkcontent>
<pt>
<Tip>
If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the [basic tutorial](../training#train-with-pytorch-trainer)!
</Tip>
You're ready to start training your model now! Load DistilGPT2 with [`AutoModelForCausalLM`]:
```py
>>> from transformers import AutoModelForCausalLM, TrainingArguments, Trainer
>>> model = AutoModelForCausalLM.from_pretrained("distilgpt2")
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`TrainingArguments`]. The only required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model).
2. Pass the training arguments to [`Trainer`] along with the model, datasets, and data collator.
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> training_args = TrainingArguments(
... output_dir="my_awesome_eli5_clm-model",
... evaluation_strategy="epoch",
... learning_rate=2e-5,
... weight_decay=0.01,
... push_to_hub=True,
... )
>>> trainer = Trainer(
... model=model,
... args=training_args,
... train_dataset=lm_dataset["train"],
... eval_dataset=lm_dataset["test"],
... data_collator=data_collator,
... )
>>> trainer.train()
```
Once training is completed, use the [`~transformers.Trainer.evaluate`] method to evaluate your model and get its perplexity:
```py
>>> import math
>>> eval_results = trainer.evaluate()
>>> print(f"Perplexity: {math.exp(eval_results['eval_loss']):.2f}")
Perplexity: 49.61
```
Then share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
</pt>
<tf>
<Tip>
If you aren't familiar with finetuning a model with Keras, take a look at the [basic tutorial](../training#train-a-tensorflow-model-with-keras)!
</Tip>
To finetune a model in TensorFlow, start by setting up an optimizer function, learning rate schedule, and some training hyperparameters:
```py
>>> from transformers import create_optimizer, AdamWeightDecay
>>> optimizer = AdamWeightDecay(learning_rate=2e-5, weight_decay_rate=0.01)
```
Then you can load DistilGPT2 with [`TFAutoModelForCausalLM`]:
```py
>>> from transformers import TFAutoModelForCausalLM
>>> model = TFAutoModelForCausalLM.from_pretrained("distilgpt2")
```
Convert your datasets to the `tf.data.Dataset` format with [`~transformers.TFPreTrainedModel.prepare_tf_dataset`]:
```py
>>> tf_train_set = model.prepare_tf_dataset(
... lm_dataset["train"],
... shuffle=True,
... batch_size=16,
... collate_fn=data_collator,
... )
>>> tf_test_set = model.prepare_tf_dataset(
... lm_dataset["test"],
... shuffle=False,
... batch_size=16,
... collate_fn=data_collator,
... )
```
Configure the model for training with [`compile`](https://keras.io/api/models/model_training_apis/#compile-method). Note that Transformers models all have a default task-relevant loss function, so you don't need to specify one unless you want to:
```py
>>> import tensorflow as tf
>>> model.compile(optimizer=optimizer) # No loss argument!
```
This can be done by specifying where to push your model and tokenizer in the [`~transformers.PushToHubCallback`]:
```py
>>> from transformers.keras_callbacks import PushToHubCallback
>>> callback = PushToHubCallback(
... output_dir="my_awesome_eli5_clm-model",
... tokenizer=tokenizer,
... )
```
Finally, you're ready to start training your model! Call [`fit`](https://keras.io/api/models/model_training_apis/#fit-method) with your training and validation datasets, the number of epochs, and your callback to finetune the model:
```py
>>> model.fit(x=tf_train_set, validation_data=tf_test_set, epochs=3, callbacks=[callback])
```
Once training is completed, your model is automatically uploaded to the Hub so everyone can use it!
</tf>
</frameworkcontent>
<Tip>
For a more in-depth example of how to finetune a model for causal language modeling, take a look at the corresponding
[PyTorch notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling.ipynb)
or [TensorFlow notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling-tf.ipynb).
</Tip>
## Inference
Great, now that you've finetuned a model, you can use it for inference!
Come up with a prompt you'd like to generate text from:
```py
>>> prompt = "Somatic hypermutation allows the immune system to"
```
The simplest way to try out your finetuned model for inference is to use it in a [`pipeline`]. Instantiate a `pipeline` for text generation with your model, and pass your text to it:
```py
>>> from transformers import pipeline
>>> generator = pipeline("text-generation", model="my_awesome_eli5_clm-model")
>>> generator(prompt)
[{'generated_text': "Somatic hypermutation allows the immune system to be able to effectively reverse the damage caused by an infection.\n\n\nThe damage caused by an infection is caused by the immune system's ability to perform its own self-correcting tasks."}]
```
<frameworkcontent>
<pt>
Tokenize the text and return the `input_ids` as PyTorch tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("my_awesome_eli5_clm-model")
>>> inputs = tokenizer(prompt, return_tensors="pt").input_ids
```
Use the [`~transformers.generation_utils.GenerationMixin.generate`] method to generate text.
For more details about the different text generation strategies and parameters for controlling generation, check out the [Text generation strategies](../generation_strategies) page.
```py
>>> from transformers import AutoModelForCausalLM
>>> model = AutoModelForCausalLM.from_pretrained("my_awesome_eli5_clm-model")
>>> outputs = model.generate(inputs, max_new_tokens=100, do_sample=True, top_k=50, top_p=0.95)
```
Decode the generated token ids back into text:
```py
>>> tokenizer.batch_decode(outputs, skip_special_tokens=True)
["Somatic hypermutation allows the immune system to react to drugs with the ability to adapt to a different environmental situation. In other words, a system of 'hypermutation' can help the immune system to adapt to a different environmental situation or in some cases even a single life. In contrast, researchers at the University of Massachusetts-Boston have found that 'hypermutation' is much stronger in mice than in humans but can be found in humans, and that it's not completely unknown to the immune system. A study on how the immune system"]
```
</pt>
<tf>
Tokenize the text and return the `input_ids` as TensorFlow tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("my_awesome_eli5_clm-model")
>>> inputs = tokenizer(prompt, return_tensors="tf").input_ids
```
Use the [`~transformers.generation_tf_utils.TFGenerationMixin.generate`] method to create the summarization. For more details about the different text generation strategies and parameters for controlling generation, check out the [Text generation strategies](../generation_strategies) page.
```py
>>> from transformers import TFAutoModelForCausalLM
>>> model = TFAutoModelForCausalLM.from_pretrained("my_awesome_eli5_clm-model")
>>> outputs = model.generate(input_ids=inputs, max_new_tokens=100, do_sample=True, top_k=50, top_p=0.95)
```
Decode the generated token ids back into text:
```py
>>> tokenizer.batch_decode(outputs, skip_special_tokens=True)
['Somatic hypermutation allows the immune system to detect the presence of other viruses as they become more prevalent. Therefore, researchers have identified a high proportion of human viruses. The proportion of virus-associated viruses in our study increases with age. Therefore, we propose a simple algorithm to detect the presence of these new viruses in our samples as a sign of improved immunity. A first study based on this algorithm, which will be published in Science on Friday, aims to show that this finding could translate into the development of a better vaccine that is more effective for']
```
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/knowledge_distillation_for_image_classification.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Knowledge Distillation for Computer Vision
[[open-in-colab]]
Knowledge distillation is a technique used to transfer knowledge from a larger, more complex model (teacher) to a smaller, simpler model (student). To distill knowledge from one model to another, we take a pre-trained teacher model trained on a certain task (image classification for this case) and randomly initialize a student model to be trained on image classification. Next, we train the student model to minimize the difference between it's outputs and the teacher's outputs, thus making it mimic the behavior. It was first introduced in [Distilling the Knowledge in a Neural Network by Hinton et al](https://arxiv.org/abs/1503.02531). In this guide, we will do task-specific knowledge distillation. We will use the [beans dataset](https://huggingface.co/datasets/beans) for this.
This guide demonstrates how you can distill a [fine-tuned ViT model](https://huggingface.co/merve/vit-mobilenet-beans-224) (teacher model) to a [MobileNet](https://huggingface.co/google/mobilenet_v2_1.4_224) (student model) using the [Trainer API](https://huggingface.co/docs/transformers/en/main_classes/trainer#trainer) of 🤗 Transformers.
Let's install the libraries needed for distillation and evaluating the process.
```bash
pip install transformers datasets accelerate tensorboard evaluate --upgrade
```
In this example, we are using the `merve/beans-vit-224` model as teacher model. It's an image classification model, based on `google/vit-base-patch16-224-in21k` fine-tuned on beans dataset. We will distill this model to a randomly initialized MobileNetV2.
We will now load the dataset.
```python
from datasets import load_dataset
dataset = load_dataset("beans")
```
We can use an image processor from either of the models, as in this case they return the same output with same resolution. We will use the `map()` method of `dataset` to apply the preprocessing to every split of the dataset.
```python
from transformers import AutoImageProcessor
teacher_processor = AutoImageProcessor.from_pretrained("merve/beans-vit-224")
def process(examples):
processed_inputs = teacher_processor(examples["image"])
return processed_inputs
processed_datasets = dataset.map(process, batched=True)
```
Essentially, we want the student model (a randomly initialized MobileNet) to mimic the teacher model (fine-tuned vision transformer). To achieve this, we first get the logits output from the teacher and the student. Then, we divide each of them by the parameter `temperature` which controls the importance of each soft target. A parameter called `lambda` weighs the importance of the distillation loss. In this example, we will use `temperature=5` and `lambda=0.5`. We will use the Kullback-Leibler Divergence loss to compute the divergence between the student and teacher. Given two data P and Q, KL Divergence explains how much extra information we need to represent P using Q. If two are identical, their KL divergence is zero, as there's no other information needed to explain P from Q. Thus, in the context of knowledge distillation, KL divergence is useful.
```python
from transformers import TrainingArguments, Trainer
import torch
import torch.nn as nn
import torch.nn.functional as F
class ImageDistilTrainer(Trainer):
def __init__(self, teacher_model=None, student_model=None, temperature=None, lambda_param=None, *args, **kwargs):
super().__init__(model=student_model, *args, **kwargs)
self.teacher = teacher_model
self.student = student_model
self.loss_function = nn.KLDivLoss(reduction="batchmean")
device = torch.device('cuda' if torch.cuda.is_available() else 'cpu')
self.teacher.to(device)
self.teacher.eval()
self.temperature = temperature
self.lambda_param = lambda_param
def compute_loss(self, student, inputs, return_outputs=False):
student_output = self.student(**inputs)
with torch.no_grad():
teacher_output = self.teacher(**inputs)
# Compute soft targets for teacher and student
soft_teacher = F.softmax(teacher_output.logits / self.temperature, dim=-1)
soft_student = F.log_softmax(student_output.logits / self.temperature, dim=-1)
# Compute the loss
distillation_loss = self.loss_function(soft_student, soft_teacher) * (self.temperature ** 2)
# Compute the true label loss
student_target_loss = student_output.loss
# Calculate final loss
loss = (1. - self.lambda_param) * student_target_loss + self.lambda_param * distillation_loss
return (loss, student_output) if return_outputs else loss
```
We will now login to Hugging Face Hub so we can push our model to the Hugging Face Hub through the `Trainer`.
```python
from huggingface_hub import notebook_login
notebook_login()
```
Let's set the `TrainingArguments`, the teacher model and the student model.
```python
from transformers import AutoModelForImageClassification, MobileNetV2Config, MobileNetV2ForImageClassification
training_args = TrainingArguments(
output_dir="my-awesome-model",
num_train_epochs=30,
fp16=True,
logging_dir=f"{repo_name}/logs",
logging_strategy="epoch",
evaluation_strategy="epoch",
save_strategy="epoch",
load_best_model_at_end=True,
metric_for_best_model="accuracy",
report_to="tensorboard",
push_to_hub=True,
hub_strategy="every_save",
hub_model_id=repo_name,
)
num_labels = len(processed_datasets["train"].features["labels"].names)
# initialize models
teacher_model = AutoModelForImageClassification.from_pretrained(
"merve/beans-vit-224",
num_labels=num_labels,
ignore_mismatched_sizes=True
)
# training MobileNetV2 from scratch
student_config = MobileNetV2Config()
student_config.num_labels = num_labels
student_model = MobileNetV2ForImageClassification(student_config)
```
We can use `compute_metrics` function to evaluate our model on the test set. This function will be used during the training process to compute the `accuracy` & `f1` of our model.
```python
import evaluate
import numpy as np
accuracy = evaluate.load("accuracy")
def compute_metrics(eval_pred):
predictions, labels = eval_pred
acc = accuracy.compute(references=labels, predictions=np.argmax(predictions, axis=1))
return {"accuracy": acc["accuracy"]}
```
Let's initialize the `Trainer` with the training arguments we defined. We will also initialize our data collator.
```python
from transformers import DefaultDataCollator
data_collator = DefaultDataCollator()
trainer = ImageDistilTrainer(
student_model=student_model,
teacher_model=teacher_model,
training_args=training_args,
train_dataset=processed_datasets["train"],
eval_dataset=processed_datasets["validation"],
data_collator=data_collator,
tokenizer=teacher_processor,
compute_metrics=compute_metrics,
temperature=5,
lambda_param=0.5
)
```
We can now train our model.
```python
trainer.train()
```
We can evaluate the model on the test set.
```python
trainer.evaluate(processed_datasets["test"])
```
On test set, our model reaches 72 percent accuracy. To have a sanity check over efficiency of distillation, we also trained MobileNet on the beans dataset from scratch with the same hyperparameters and observed 63 percent accuracy on the test set. We invite the readers to try different pre-trained teacher models, student architectures, distillation parameters and report their findings. The training logs and checkpoints for distilled model can be found in [this repository](https://huggingface.co/merve/vit-mobilenet-beans-224), and MobileNetV2 trained from scratch can be found in this [repository](https://huggingface.co/merve/resnet-mobilenet-beans-5).
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/question_answering.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Question answering
[[open-in-colab]]
<Youtube id="ajPx5LwJD-I"/>
Question answering tasks return an answer given a question. If you've ever asked a virtual assistant like Alexa, Siri or Google what the weather is, then you've used a question answering model before. There are two common types of question answering tasks:
- Extractive: extract the answer from the given context.
- Abstractive: generate an answer from the context that correctly answers the question.
This guide will show you how to:
1. Finetune [DistilBERT](https://huggingface.co/distilbert-base-uncased) on the [SQuAD](https://huggingface.co/datasets/squad) dataset for extractive question answering.
2. Use your finetuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[ALBERT](../model_doc/albert), [BART](../model_doc/bart), [BERT](../model_doc/bert), [BigBird](../model_doc/big_bird), [BigBird-Pegasus](../model_doc/bigbird_pegasus), [BLOOM](../model_doc/bloom), [CamemBERT](../model_doc/camembert), [CANINE](../model_doc/canine), [ConvBERT](../model_doc/convbert), [Data2VecText](../model_doc/data2vec-text), [DeBERTa](../model_doc/deberta), [DeBERTa-v2](../model_doc/deberta-v2), [DistilBERT](../model_doc/distilbert), [ELECTRA](../model_doc/electra), [ERNIE](../model_doc/ernie), [ErnieM](../model_doc/ernie_m), [Falcon](../model_doc/falcon), [FlauBERT](../model_doc/flaubert), [FNet](../model_doc/fnet), [Funnel Transformer](../model_doc/funnel), [OpenAI GPT-2](../model_doc/gpt2), [GPT Neo](../model_doc/gpt_neo), [GPT NeoX](../model_doc/gpt_neox), [GPT-J](../model_doc/gptj), [I-BERT](../model_doc/ibert), [LayoutLMv2](../model_doc/layoutlmv2), [LayoutLMv3](../model_doc/layoutlmv3), [LED](../model_doc/led), [LiLT](../model_doc/lilt), [Longformer](../model_doc/longformer), [LUKE](../model_doc/luke), [LXMERT](../model_doc/lxmert), [MarkupLM](../model_doc/markuplm), [mBART](../model_doc/mbart), [MEGA](../model_doc/mega), [Megatron-BERT](../model_doc/megatron-bert), [MobileBERT](../model_doc/mobilebert), [MPNet](../model_doc/mpnet), [MPT](../model_doc/mpt), [MRA](../model_doc/mra), [MT5](../model_doc/mt5), [MVP](../model_doc/mvp), [Nezha](../model_doc/nezha), [Nyströmformer](../model_doc/nystromformer), [OPT](../model_doc/opt), [QDQBert](../model_doc/qdqbert), [Reformer](../model_doc/reformer), [RemBERT](../model_doc/rembert), [RoBERTa](../model_doc/roberta), [RoBERTa-PreLayerNorm](../model_doc/roberta-prelayernorm), [RoCBert](../model_doc/roc_bert), [RoFormer](../model_doc/roformer), [Splinter](../model_doc/splinter), [SqueezeBERT](../model_doc/squeezebert), [T5](../model_doc/t5), [UMT5](../model_doc/umt5), [XLM](../model_doc/xlm), [XLM-RoBERTa](../model_doc/xlm-roberta), [XLM-RoBERTa-XL](../model_doc/xlm-roberta-xl), [XLNet](../model_doc/xlnet), [X-MOD](../model_doc/xmod), [YOSO](../model_doc/yoso)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install transformers datasets evaluate
```
We encourage you to login to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to login:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load SQuAD dataset
Start by loading a smaller subset of the SQuAD dataset from the 🤗 Datasets library. This'll give you a chance to experiment and make sure everything works before spending more time training on the full dataset.
```py
>>> from datasets import load_dataset
>>> squad = load_dataset("squad", split="train[:5000]")
```
Split the dataset's `train` split into a train and test set with the [`~datasets.Dataset.train_test_split`] method:
```py
>>> squad = squad.train_test_split(test_size=0.2)
```
Then take a look at an example:
```py
>>> squad["train"][0]
{'answers': {'answer_start': [515], 'text': ['Saint Bernadette Soubirous']},
'context': 'Architecturally, the school has a Catholic character. Atop the Main Building\'s gold dome is a golden statue of the Virgin Mary. Immediately in front of the Main Building and facing it, is a copper statue of Christ with arms upraised with the legend "Venite Ad Me Omnes". Next to the Main Building is the Basilica of the Sacred Heart. Immediately behind the basilica is the Grotto, a Marian place of prayer and reflection. It is a replica of the grotto at Lourdes, France where the Virgin Mary reputedly appeared to Saint Bernadette Soubirous in 1858. At the end of the main drive (and in a direct line that connects through 3 statues and the Gold Dome), is a simple, modern stone statue of Mary.',
'id': '5733be284776f41900661182',
'question': 'To whom did the Virgin Mary allegedly appear in 1858 in Lourdes France?',
'title': 'University_of_Notre_Dame'
}
```
There are several important fields here:
- `answers`: the starting location of the answer token and the answer text.
- `context`: background information from which the model needs to extract the answer.
- `question`: the question a model should answer.
## Preprocess
<Youtube id="qgaM0weJHpA"/>
The next step is to load a DistilBERT tokenizer to process the `question` and `context` fields:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("distilbert-base-uncased")
```
There are a few preprocessing steps particular to question answering tasks you should be aware of:
1. Some examples in a dataset may have a very long `context` that exceeds the maximum input length of the model. To deal with longer sequences, truncate only the `context` by setting `truncation="only_second"`.
2. Next, map the start and end positions of the answer to the original `context` by setting
`return_offset_mapping=True`.
3. With the mapping in hand, now you can find the start and end tokens of the answer. Use the [`~tokenizers.Encoding.sequence_ids`] method to
find which part of the offset corresponds to the `question` and which corresponds to the `context`.
Here is how you can create a function to truncate and map the start and end tokens of the `answer` to the `context`:
```py
>>> def preprocess_function(examples):
... questions = [q.strip() for q in examples["question"]]
... inputs = tokenizer(
... questions,
... examples["context"],
... max_length=384,
... truncation="only_second",
... return_offsets_mapping=True,
... padding="max_length",
... )
... offset_mapping = inputs.pop("offset_mapping")
... answers = examples["answers"]
... start_positions = []
... end_positions = []
... for i, offset in enumerate(offset_mapping):
... answer = answers[i]
... start_char = answer["answer_start"][0]
... end_char = answer["answer_start"][0] + len(answer["text"][0])
... sequence_ids = inputs.sequence_ids(i)
... # Find the start and end of the context
... idx = 0
... while sequence_ids[idx] != 1:
... idx += 1
... context_start = idx
... while sequence_ids[idx] == 1:
... idx += 1
... context_end = idx - 1
... # If the answer is not fully inside the context, label it (0, 0)
... if offset[context_start][0] > end_char or offset[context_end][1] < start_char:
... start_positions.append(0)
... end_positions.append(0)
... else:
... # Otherwise it's the start and end token positions
... idx = context_start
... while idx <= context_end and offset[idx][0] <= start_char:
... idx += 1
... start_positions.append(idx - 1)
... idx = context_end
... while idx >= context_start and offset[idx][1] >= end_char:
... idx -= 1
... end_positions.append(idx + 1)
... inputs["start_positions"] = start_positions
... inputs["end_positions"] = end_positions
... return inputs
```
To apply the preprocessing function over the entire dataset, use 🤗 Datasets [`~datasets.Dataset.map`] function. You can speed up the `map` function by setting `batched=True` to process multiple elements of the dataset at once. Remove any columns you don't need:
```py
>>> tokenized_squad = squad.map(preprocess_function, batched=True, remove_columns=squad["train"].column_names)
```
Now create a batch of examples using [`DefaultDataCollator`]. Unlike other data collators in 🤗 Transformers, the [`DefaultDataCollator`] does not apply any additional preprocessing such as padding.
<frameworkcontent>
<pt>
```py
>>> from transformers import DefaultDataCollator
>>> data_collator = DefaultDataCollator()
```
</pt>
<tf>
```py
>>> from transformers import DefaultDataCollator
>>> data_collator = DefaultDataCollator(return_tensors="tf")
```
</tf>
</frameworkcontent>
## Train
<frameworkcontent>
<pt>
<Tip>
If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the basic tutorial [here](../training#train-with-pytorch-trainer)!
</Tip>
You're ready to start training your model now! Load DistilBERT with [`AutoModelForQuestionAnswering`]:
```py
>>> from transformers import AutoModelForQuestionAnswering, TrainingArguments, Trainer
>>> model = AutoModelForQuestionAnswering.from_pretrained("distilbert-base-uncased")
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`TrainingArguments`]. The only required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model).
2. Pass the training arguments to [`Trainer`] along with the model, dataset, tokenizer, and data collator.
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> training_args = TrainingArguments(
... output_dir="my_awesome_qa_model",
... evaluation_strategy="epoch",
... learning_rate=2e-5,
... per_device_train_batch_size=16,
... per_device_eval_batch_size=16,
... num_train_epochs=3,
... weight_decay=0.01,
... push_to_hub=True,
... )
>>> trainer = Trainer(
... model=model,
... args=training_args,
... train_dataset=tokenized_squad["train"],
... eval_dataset=tokenized_squad["test"],
... tokenizer=tokenizer,
... data_collator=data_collator,
... )
>>> trainer.train()
```
Once training is completed, share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
</pt>
<tf>
<Tip>
If you aren't familiar with finetuning a model with Keras, take a look at the basic tutorial [here](../training#train-a-tensorflow-model-with-keras)!
</Tip>
To finetune a model in TensorFlow, start by setting up an optimizer function, learning rate schedule, and some training hyperparameters:
```py
>>> from transformers import create_optimizer
>>> batch_size = 16
>>> num_epochs = 2
>>> total_train_steps = (len(tokenized_squad["train"]) // batch_size) * num_epochs
>>> optimizer, schedule = create_optimizer(
... init_lr=2e-5,
... num_warmup_steps=0,
... num_train_steps=total_train_steps,
... )
```
Then you can load DistilBERT with [`TFAutoModelForQuestionAnswering`]:
```py
>>> from transformers import TFAutoModelForQuestionAnswering
>>> model = TFAutoModelForQuestionAnswering("distilbert-base-uncased")
```
Convert your datasets to the `tf.data.Dataset` format with [`~transformers.TFPreTrainedModel.prepare_tf_dataset`]:
```py
>>> tf_train_set = model.prepare_tf_dataset(
... tokenized_squad["train"],
... shuffle=True,
... batch_size=16,
... collate_fn=data_collator,
... )
>>> tf_validation_set = model.prepare_tf_dataset(
... tokenized_squad["test"],
... shuffle=False,
... batch_size=16,
... collate_fn=data_collator,
... )
```
Configure the model for training with [`compile`](https://keras.io/api/models/model_training_apis/#compile-method):
```py
>>> import tensorflow as tf
>>> model.compile(optimizer=optimizer)
```
The last thing to setup before you start training is to provide a way to push your model to the Hub. This can be done by specifying where to push your model and tokenizer in the [`~transformers.PushToHubCallback`]:
```py
>>> from transformers.keras_callbacks import PushToHubCallback
>>> callback = PushToHubCallback(
... output_dir="my_awesome_qa_model",
... tokenizer=tokenizer,
... )
```
Finally, you're ready to start training your model! Call [`fit`](https://keras.io/api/models/model_training_apis/#fit-method) with your training and validation datasets, the number of epochs, and your callback to finetune the model:
```py
>>> model.fit(x=tf_train_set, validation_data=tf_validation_set, epochs=3, callbacks=[callback])
```
Once training is completed, your model is automatically uploaded to the Hub so everyone can use it!
</tf>
</frameworkcontent>
<Tip>
For a more in-depth example of how to finetune a model for question answering, take a look at the corresponding
[PyTorch notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/question_answering.ipynb)
or [TensorFlow notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/question_answering-tf.ipynb).
</Tip>
## Evaluate
Evaluation for question answering requires a significant amount of postprocessing. To avoid taking up too much of your time, this guide skips the evaluation step. The [`Trainer`] still calculates the evaluation loss during training so you're not completely in the dark about your model's performance.
If have more time and you're interested in how to evaluate your model for question answering, take a look at the [Question answering](https://huggingface.co/course/chapter7/7?fw=pt#postprocessing) chapter from the 🤗 Hugging Face Course!
## Inference
Great, now that you've finetuned a model, you can use it for inference!
Come up with a question and some context you'd like the model to predict:
```py
>>> question = "How many programming languages does BLOOM support?"
>>> context = "BLOOM has 176 billion parameters and can generate text in 46 languages natural languages and 13 programming languages."
```
The simplest way to try out your finetuned model for inference is to use it in a [`pipeline`]. Instantiate a `pipeline` for question answering with your model, and pass your text to it:
```py
>>> from transformers import pipeline
>>> question_answerer = pipeline("question-answering", model="my_awesome_qa_model")
>>> question_answerer(question=question, context=context)
{'score': 0.2058267742395401,
'start': 10,
'end': 95,
'answer': '176 billion parameters and can generate text in 46 languages natural languages and 13'}
```
You can also manually replicate the results of the `pipeline` if you'd like:
<frameworkcontent>
<pt>
Tokenize the text and return PyTorch tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("my_awesome_qa_model")
>>> inputs = tokenizer(question, context, return_tensors="pt")
```
Pass your inputs to the model and return the `logits`:
```py
>>> import torch
>>> from transformers import AutoModelForQuestionAnswering
>>> model = AutoModelForQuestionAnswering.from_pretrained("my_awesome_qa_model")
>>> with torch.no_grad():
... outputs = model(**inputs)
```
Get the highest probability from the model output for the start and end positions:
```py
>>> answer_start_index = outputs.start_logits.argmax()
>>> answer_end_index = outputs.end_logits.argmax()
```
Decode the predicted tokens to get the answer:
```py
>>> predict_answer_tokens = inputs.input_ids[0, answer_start_index : answer_end_index + 1]
>>> tokenizer.decode(predict_answer_tokens)
'176 billion parameters and can generate text in 46 languages natural languages and 13'
```
</pt>
<tf>
Tokenize the text and return TensorFlow tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("my_awesome_qa_model")
>>> inputs = tokenizer(question, text, return_tensors="tf")
```
Pass your inputs to the model and return the `logits`:
```py
>>> from transformers import TFAutoModelForQuestionAnswering
>>> model = TFAutoModelForQuestionAnswering.from_pretrained("my_awesome_qa_model")
>>> outputs = model(**inputs)
```
Get the highest probability from the model output for the start and end positions:
```py
>>> answer_start_index = int(tf.math.argmax(outputs.start_logits, axis=-1)[0])
>>> answer_end_index = int(tf.math.argmax(outputs.end_logits, axis=-1)[0])
```
Decode the predicted tokens to get the answer:
```py
>>> predict_answer_tokens = inputs.input_ids[0, answer_start_index : answer_end_index + 1]
>>> tokenizer.decode(predict_answer_tokens)
'176 billion parameters and can generate text in 46 languages natural languages and 13'
```
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/monocular_depth_estimation.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Monocular depth estimation
Monocular depth estimation is a computer vision task that involves predicting the depth information of a scene from a
single image. In other words, it is the process of estimating the distance of objects in a scene from
a single camera viewpoint.
Monocular depth estimation has various applications, including 3D reconstruction, augmented reality, autonomous driving,
and robotics. It is a challenging task as it requires the model to understand the complex relationships between objects
in the scene and the corresponding depth information, which can be affected by factors such as lighting conditions,
occlusion, and texture.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[DPT](../model_doc/dpt), [GLPN](../model_doc/glpn)
<!--End of the generated tip-->
</Tip>
In this guide you'll learn how to:
* create a depth estimation pipeline
* run depth estimation inference by hand
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install -q transformers
```
## Depth estimation pipeline
The simplest way to try out inference with a model supporting depth estimation is to use the corresponding [`pipeline`].
Instantiate a pipeline from a [checkpoint on the Hugging Face Hub](https://huggingface.co/models?pipeline_tag=depth-estimation&sort=downloads):
```py
>>> from transformers import pipeline
>>> checkpoint = "vinvino02/glpn-nyu"
>>> depth_estimator = pipeline("depth-estimation", model=checkpoint)
```
Next, choose an image to analyze:
```py
>>> from PIL import Image
>>> import requests
>>> url = "https://unsplash.com/photos/HwBAsSbPBDU/download?ixid=MnwxMjA3fDB8MXxzZWFyY2h8MzR8fGNhciUyMGluJTIwdGhlJTIwc3RyZWV0fGVufDB8MHx8fDE2Nzg5MDEwODg&force=true&w=640"
>>> image = Image.open(requests.get(url, stream=True).raw)
>>> image
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/depth-estimation-example.jpg" alt="Photo of a busy street"/>
</div>
Pass the image to the pipeline.
```py
>>> predictions = depth_estimator(image)
```
The pipeline returns a dictionary with two entries. The first one, called `predicted_depth`, is a tensor with the values
being the depth expressed in meters for each pixel.
The second one, `depth`, is a PIL image that visualizes the depth estimation result.
Let's take a look at the visualized result:
```py
>>> predictions["depth"]
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/depth-visualization.png" alt="Depth estimation visualization"/>
</div>
## Depth estimation inference by hand
Now that you've seen how to use the depth estimation pipeline, let's see how we can replicate the same result by hand.
Start by loading the model and associated processor from a [checkpoint on the Hugging Face Hub](https://huggingface.co/models?pipeline_tag=depth-estimation&sort=downloads).
Here we'll use the same checkpoint as before:
```py
>>> from transformers import AutoImageProcessor, AutoModelForDepthEstimation
>>> checkpoint = "vinvino02/glpn-nyu"
>>> image_processor = AutoImageProcessor.from_pretrained(checkpoint)
>>> model = AutoModelForDepthEstimation.from_pretrained(checkpoint)
```
Prepare the image input for the model using the `image_processor` that will take care of the necessary image transformations
such as resizing and normalization:
```py
>>> pixel_values = image_processor(image, return_tensors="pt").pixel_values
```
Pass the prepared inputs through the model:
```py
>>> import torch
>>> with torch.no_grad():
... outputs = model(pixel_values)
... predicted_depth = outputs.predicted_depth
```
Visualize the results:
```py
>>> import numpy as np
>>> # interpolate to original size
>>> prediction = torch.nn.functional.interpolate(
... predicted_depth.unsqueeze(1),
... size=image.size[::-1],
... mode="bicubic",
... align_corners=False,
... ).squeeze()
>>> output = prediction.numpy()
>>> formatted = (output * 255 / np.max(output)).astype("uint8")
>>> depth = Image.fromarray(formatted)
>>> depth
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/depth-visualization.png" alt="Depth estimation visualization"/>
</div>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/audio_classification.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Audio classification
[[open-in-colab]]
<Youtube id="KWwzcmG98Ds"/>
Audio classification - just like with text - assigns a class label output from the input data. The only difference is instead of text inputs, you have raw audio waveforms. Some practical applications of audio classification include identifying speaker intent, language classification, and even animal species by their sounds.
This guide will show you how to:
1. Finetune [Wav2Vec2](https://huggingface.co/facebook/wav2vec2-base) on the [MInDS-14](https://huggingface.co/datasets/PolyAI/minds14) dataset to classify speaker intent.
2. Use your finetuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[Audio Spectrogram Transformer](../model_doc/audio-spectrogram-transformer), [Data2VecAudio](../model_doc/data2vec-audio), [Hubert](../model_doc/hubert), [SEW](../model_doc/sew), [SEW-D](../model_doc/sew-d), [UniSpeech](../model_doc/unispeech), [UniSpeechSat](../model_doc/unispeech-sat), [Wav2Vec2](../model_doc/wav2vec2), [Wav2Vec2-Conformer](../model_doc/wav2vec2-conformer), [WavLM](../model_doc/wavlm), [Whisper](../model_doc/whisper)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install transformers datasets evaluate
```
We encourage you to login to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to login:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load MInDS-14 dataset
Start by loading the MInDS-14 dataset from the 🤗 Datasets library:
```py
>>> from datasets import load_dataset, Audio
>>> minds = load_dataset("PolyAI/minds14", name="en-US", split="train")
```
Split the dataset's `train` split into a smaller train and test set with the [`~datasets.Dataset.train_test_split`] method. This'll give you a chance to experiment and make sure everything works before spending more time on the full dataset.
```py
>>> minds = minds.train_test_split(test_size=0.2)
```
Then take a look at the dataset:
```py
>>> minds
DatasetDict({
train: Dataset({
features: ['path', 'audio', 'transcription', 'english_transcription', 'intent_class', 'lang_id'],
num_rows: 450
})
test: Dataset({
features: ['path', 'audio', 'transcription', 'english_transcription', 'intent_class', 'lang_id'],
num_rows: 113
})
})
```
While the dataset contains a lot of useful information, like `lang_id` and `english_transcription`, you'll focus on the `audio` and `intent_class` in this guide. Remove the other columns with the [`~datasets.Dataset.remove_columns`] method:
```py
>>> minds = minds.remove_columns(["path", "transcription", "english_transcription", "lang_id"])
```
Take a look at an example now:
```py
>>> minds["train"][0]
{'audio': {'array': array([ 0. , 0. , 0. , ..., -0.00048828,
-0.00024414, -0.00024414], dtype=float32),
'path': '/root/.cache/huggingface/datasets/downloads/extracted/f14948e0e84be638dd7943ac36518a4cf3324e8b7aa331c5ab11541518e9368c/en-US~APP_ERROR/602b9a5fbb1e6d0fbce91f52.wav',
'sampling_rate': 8000},
'intent_class': 2}
```
There are two fields:
- `audio`: a 1-dimensional `array` of the speech signal that must be called to load and resample the audio file.
- `intent_class`: represents the class id of the speaker's intent.
To make it easier for the model to get the label name from the label id, create a dictionary that maps the label name to an integer and vice versa:
```py
>>> labels = minds["train"].features["intent_class"].names
>>> label2id, id2label = dict(), dict()
>>> for i, label in enumerate(labels):
... label2id[label] = str(i)
... id2label[str(i)] = label
```
Now you can convert the label id to a label name:
```py
>>> id2label[str(2)]
'app_error'
```
## Preprocess
The next step is to load a Wav2Vec2 feature extractor to process the audio signal:
```py
>>> from transformers import AutoFeatureExtractor
>>> feature_extractor = AutoFeatureExtractor.from_pretrained("facebook/wav2vec2-base")
```
The MInDS-14 dataset has a sampling rate of 8000khz (you can find this information in it's [dataset card](https://huggingface.co/datasets/PolyAI/minds14)), which means you'll need to resample the dataset to 16000kHz to use the pretrained Wav2Vec2 model:
```py
>>> minds = minds.cast_column("audio", Audio(sampling_rate=16_000))
>>> minds["train"][0]
{'audio': {'array': array([ 2.2098757e-05, 4.6582241e-05, -2.2803260e-05, ...,
-2.8419291e-04, -2.3305941e-04, -1.1425107e-04], dtype=float32),
'path': '/root/.cache/huggingface/datasets/downloads/extracted/f14948e0e84be638dd7943ac36518a4cf3324e8b7aa331c5ab11541518e9368c/en-US~APP_ERROR/602b9a5fbb1e6d0fbce91f52.wav',
'sampling_rate': 16000},
'intent_class': 2}
```
Now create a preprocessing function that:
1. Calls the `audio` column to load, and if necessary, resample the audio file.
2. Checks if the sampling rate of the audio file matches the sampling rate of the audio data a model was pretrained with. You can find this information in the Wav2Vec2 [model card](https://huggingface.co/facebook/wav2vec2-base).
3. Set a maximum input length to batch longer inputs without truncating them.
```py
>>> def preprocess_function(examples):
... audio_arrays = [x["array"] for x in examples["audio"]]
... inputs = feature_extractor(
... audio_arrays, sampling_rate=feature_extractor.sampling_rate, max_length=16000, truncation=True
... )
... return inputs
```
To apply the preprocessing function over the entire dataset, use 🤗 Datasets [`~datasets.Dataset.map`] function. You can speed up `map` by setting `batched=True` to process multiple elements of the dataset at once. Remove the columns you don't need, and rename `intent_class` to `label` because that's the name the model expects:
```py
>>> encoded_minds = minds.map(preprocess_function, remove_columns="audio", batched=True)
>>> encoded_minds = encoded_minds.rename_column("intent_class", "label")
```
## Evaluate
Including a metric during training is often helpful for evaluating your model's performance. You can quickly load a evaluation method with the 🤗 [Evaluate](https://huggingface.co/docs/evaluate/index) library. For this task, load the [accuracy](https://huggingface.co/spaces/evaluate-metric/accuracy) metric (see the 🤗 Evaluate [quick tour](https://huggingface.co/docs/evaluate/a_quick_tour) to learn more about how to load and compute a metric):
```py
>>> import evaluate
>>> accuracy = evaluate.load("accuracy")
```
Then create a function that passes your predictions and labels to [`~evaluate.EvaluationModule.compute`] to calculate the accuracy:
```py
>>> import numpy as np
>>> def compute_metrics(eval_pred):
... predictions = np.argmax(eval_pred.predictions, axis=1)
... return accuracy.compute(predictions=predictions, references=eval_pred.label_ids)
```
Your `compute_metrics` function is ready to go now, and you'll return to it when you setup your training.
## Train
<frameworkcontent>
<pt>
<Tip>
If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the basic tutorial [here](../training#train-with-pytorch-trainer)!
</Tip>
You're ready to start training your model now! Load Wav2Vec2 with [`AutoModelForAudioClassification`] along with the number of expected labels, and the label mappings:
```py
>>> from transformers import AutoModelForAudioClassification, TrainingArguments, Trainer
>>> num_labels = len(id2label)
>>> model = AutoModelForAudioClassification.from_pretrained(
... "facebook/wav2vec2-base", num_labels=num_labels, label2id=label2id, id2label=id2label
... )
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`TrainingArguments`]. The only required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model). At the end of each epoch, the [`Trainer`] will evaluate the accuracy and save the training checkpoint.
2. Pass the training arguments to [`Trainer`] along with the model, dataset, tokenizer, data collator, and `compute_metrics` function.
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> training_args = TrainingArguments(
... output_dir="my_awesome_mind_model",
... evaluation_strategy="epoch",
... save_strategy="epoch",
... learning_rate=3e-5,
... per_device_train_batch_size=32,
... gradient_accumulation_steps=4,
... per_device_eval_batch_size=32,
... num_train_epochs=10,
... warmup_ratio=0.1,
... logging_steps=10,
... load_best_model_at_end=True,
... metric_for_best_model="accuracy",
... push_to_hub=True,
... )
>>> trainer = Trainer(
... model=model,
... args=training_args,
... train_dataset=encoded_minds["train"],
... eval_dataset=encoded_minds["test"],
... tokenizer=feature_extractor,
... compute_metrics=compute_metrics,
... )
>>> trainer.train()
```
Once training is completed, share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
</pt>
</frameworkcontent>
<Tip>
For a more in-depth example of how to finetune a model for audio classification, take a look at the corresponding [PyTorch notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/audio_classification.ipynb).
</Tip>
## Inference
Great, now that you've finetuned a model, you can use it for inference!
Load an audio file you'd like to run inference on. Remember to resample the sampling rate of the audio file to match the sampling rate of the model if you need to!
```py
>>> from datasets import load_dataset, Audio
>>> dataset = load_dataset("PolyAI/minds14", name="en-US", split="train")
>>> dataset = dataset.cast_column("audio", Audio(sampling_rate=16000))
>>> sampling_rate = dataset.features["audio"].sampling_rate
>>> audio_file = dataset[0]["audio"]["path"]
```
The simplest way to try out your finetuned model for inference is to use it in a [`pipeline`]. Instantiate a `pipeline` for audio classification with your model, and pass your audio file to it:
```py
>>> from transformers import pipeline
>>> classifier = pipeline("audio-classification", model="stevhliu/my_awesome_minds_model")
>>> classifier(audio_file)
[
{'score': 0.09766869246959686, 'label': 'cash_deposit'},
{'score': 0.07998877018690109, 'label': 'app_error'},
{'score': 0.0781070664525032, 'label': 'joint_account'},
{'score': 0.07667109370231628, 'label': 'pay_bill'},
{'score': 0.0755252093076706, 'label': 'balance'}
]
```
You can also manually replicate the results of the `pipeline` if you'd like:
<frameworkcontent>
<pt>
Load a feature extractor to preprocess the audio file and return the `input` as PyTorch tensors:
```py
>>> from transformers import AutoFeatureExtractor
>>> feature_extractor = AutoFeatureExtractor.from_pretrained("stevhliu/my_awesome_minds_model")
>>> inputs = feature_extractor(dataset[0]["audio"]["array"], sampling_rate=sampling_rate, return_tensors="pt")
```
Pass your inputs to the model and return the logits:
```py
>>> from transformers import AutoModelForAudioClassification
>>> model = AutoModelForAudioClassification.from_pretrained("stevhliu/my_awesome_minds_model")
>>> with torch.no_grad():
... logits = model(**inputs).logits
```
Get the class with the highest probability, and use the model's `id2label` mapping to convert it to a label:
```py
>>> import torch
>>> predicted_class_ids = torch.argmax(logits).item()
>>> predicted_label = model.config.id2label[predicted_class_ids]
>>> predicted_label
'cash_deposit'
```
</pt>
</frameworkcontent> | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/token_classification.md | <!--Copyright 2022 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Token classification
[[open-in-colab]]
<Youtube id="wVHdVlPScxA"/>
Token classification assigns a label to individual tokens in a sentence. One of the most common token classification tasks is Named Entity Recognition (NER). NER attempts to find a label for each entity in a sentence, such as a person, location, or organization.
This guide will show you how to:
1. Finetune [DistilBERT](https://huggingface.co/distilbert-base-uncased) on the [WNUT 17](https://huggingface.co/datasets/wnut_17) dataset to detect new entities.
2. Use your finetuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[ALBERT](../model_doc/albert), [BERT](../model_doc/bert), [BigBird](../model_doc/big_bird), [BioGpt](../model_doc/biogpt), [BLOOM](../model_doc/bloom), [BROS](../model_doc/bros), [CamemBERT](../model_doc/camembert), [CANINE](../model_doc/canine), [ConvBERT](../model_doc/convbert), [Data2VecText](../model_doc/data2vec-text), [DeBERTa](../model_doc/deberta), [DeBERTa-v2](../model_doc/deberta-v2), [DistilBERT](../model_doc/distilbert), [ELECTRA](../model_doc/electra), [ERNIE](../model_doc/ernie), [ErnieM](../model_doc/ernie_m), [ESM](../model_doc/esm), [Falcon](../model_doc/falcon), [FlauBERT](../model_doc/flaubert), [FNet](../model_doc/fnet), [Funnel Transformer](../model_doc/funnel), [GPT-Sw3](../model_doc/gpt-sw3), [OpenAI GPT-2](../model_doc/gpt2), [GPTBigCode](../model_doc/gpt_bigcode), [GPT Neo](../model_doc/gpt_neo), [GPT NeoX](../model_doc/gpt_neox), [I-BERT](../model_doc/ibert), [LayoutLM](../model_doc/layoutlm), [LayoutLMv2](../model_doc/layoutlmv2), [LayoutLMv3](../model_doc/layoutlmv3), [LiLT](../model_doc/lilt), [Longformer](../model_doc/longformer), [LUKE](../model_doc/luke), [MarkupLM](../model_doc/markuplm), [MEGA](../model_doc/mega), [Megatron-BERT](../model_doc/megatron-bert), [MobileBERT](../model_doc/mobilebert), [MPNet](../model_doc/mpnet), [MPT](../model_doc/mpt), [MRA](../model_doc/mra), [Nezha](../model_doc/nezha), [Nyströmformer](../model_doc/nystromformer), [Phi](../model_doc/phi), [QDQBert](../model_doc/qdqbert), [RemBERT](../model_doc/rembert), [RoBERTa](../model_doc/roberta), [RoBERTa-PreLayerNorm](../model_doc/roberta-prelayernorm), [RoCBert](../model_doc/roc_bert), [RoFormer](../model_doc/roformer), [SqueezeBERT](../model_doc/squeezebert), [XLM](../model_doc/xlm), [XLM-RoBERTa](../model_doc/xlm-roberta), [XLM-RoBERTa-XL](../model_doc/xlm-roberta-xl), [XLNet](../model_doc/xlnet), [X-MOD](../model_doc/xmod), [YOSO](../model_doc/yoso)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install transformers datasets evaluate seqeval
```
We encourage you to login to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to login:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load WNUT 17 dataset
Start by loading the WNUT 17 dataset from the 🤗 Datasets library:
```py
>>> from datasets import load_dataset
>>> wnut = load_dataset("wnut_17")
```
Then take a look at an example:
```py
>>> wnut["train"][0]
{'id': '0',
'ner_tags': [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 7, 8, 8, 0, 7, 0, 0, 0, 0, 0, 0, 0, 0],
'tokens': ['@paulwalk', 'It', "'s", 'the', 'view', 'from', 'where', 'I', "'m", 'living', 'for', 'two', 'weeks', '.', 'Empire', 'State', 'Building', '=', 'ESB', '.', 'Pretty', 'bad', 'storm', 'here', 'last', 'evening', '.']
}
```
Each number in `ner_tags` represents an entity. Convert the numbers to their label names to find out what the entities are:
```py
>>> label_list = wnut["train"].features[f"ner_tags"].feature.names
>>> label_list
[
"O",
"B-corporation",
"I-corporation",
"B-creative-work",
"I-creative-work",
"B-group",
"I-group",
"B-location",
"I-location",
"B-person",
"I-person",
"B-product",
"I-product",
]
```
The letter that prefixes each `ner_tag` indicates the token position of the entity:
- `B-` indicates the beginning of an entity.
- `I-` indicates a token is contained inside the same entity (for example, the `State` token is a part of an entity like
`Empire State Building`).
- `0` indicates the token doesn't correspond to any entity.
## Preprocess
<Youtube id="iY2AZYdZAr0"/>
The next step is to load a DistilBERT tokenizer to preprocess the `tokens` field:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("distilbert-base-uncased")
```
As you saw in the example `tokens` field above, it looks like the input has already been tokenized. But the input actually hasn't been tokenized yet and you'll need to set `is_split_into_words=True` to tokenize the words into subwords. For example:
```py
>>> example = wnut["train"][0]
>>> tokenized_input = tokenizer(example["tokens"], is_split_into_words=True)
>>> tokens = tokenizer.convert_ids_to_tokens(tokenized_input["input_ids"])
>>> tokens
['[CLS]', '@', 'paul', '##walk', 'it', "'", 's', 'the', 'view', 'from', 'where', 'i', "'", 'm', 'living', 'for', 'two', 'weeks', '.', 'empire', 'state', 'building', '=', 'es', '##b', '.', 'pretty', 'bad', 'storm', 'here', 'last', 'evening', '.', '[SEP]']
```
However, this adds some special tokens `[CLS]` and `[SEP]` and the subword tokenization creates a mismatch between the input and labels. A single word corresponding to a single label may now be split into two subwords. You'll need to realign the tokens and labels by:
1. Mapping all tokens to their corresponding word with the [`word_ids`](https://huggingface.co/docs/transformers/main_classes/tokenizer#transformers.BatchEncoding.word_ids) method.
2. Assigning the label `-100` to the special tokens `[CLS]` and `[SEP]` so they're ignored by the PyTorch loss function (see [CrossEntropyLoss](https://pytorch.org/docs/stable/generated/torch.nn.CrossEntropyLoss.html)).
3. Only labeling the first token of a given word. Assign `-100` to other subtokens from the same word.
Here is how you can create a function to realign the tokens and labels, and truncate sequences to be no longer than DistilBERT's maximum input length:
```py
>>> def tokenize_and_align_labels(examples):
... tokenized_inputs = tokenizer(examples["tokens"], truncation=True, is_split_into_words=True)
... labels = []
... for i, label in enumerate(examples[f"ner_tags"]):
... word_ids = tokenized_inputs.word_ids(batch_index=i) # Map tokens to their respective word.
... previous_word_idx = None
... label_ids = []
... for word_idx in word_ids: # Set the special tokens to -100.
... if word_idx is None:
... label_ids.append(-100)
... elif word_idx != previous_word_idx: # Only label the first token of a given word.
... label_ids.append(label[word_idx])
... else:
... label_ids.append(-100)
... previous_word_idx = word_idx
... labels.append(label_ids)
... tokenized_inputs["labels"] = labels
... return tokenized_inputs
```
To apply the preprocessing function over the entire dataset, use 🤗 Datasets [`~datasets.Dataset.map`] function. You can speed up the `map` function by setting `batched=True` to process multiple elements of the dataset at once:
```py
>>> tokenized_wnut = wnut.map(tokenize_and_align_labels, batched=True)
```
Now create a batch of examples using [`DataCollatorWithPadding`]. It's more efficient to *dynamically pad* the sentences to the longest length in a batch during collation, instead of padding the whole dataset to the maximum length.
<frameworkcontent>
<pt>
```py
>>> from transformers import DataCollatorForTokenClassification
>>> data_collator = DataCollatorForTokenClassification(tokenizer=tokenizer)
```
</pt>
<tf>
```py
>>> from transformers import DataCollatorForTokenClassification
>>> data_collator = DataCollatorForTokenClassification(tokenizer=tokenizer, return_tensors="tf")
```
</tf>
</frameworkcontent>
## Evaluate
Including a metric during training is often helpful for evaluating your model's performance. You can quickly load a evaluation method with the 🤗 [Evaluate](https://huggingface.co/docs/evaluate/index) library. For this task, load the [seqeval](https://huggingface.co/spaces/evaluate-metric/seqeval) framework (see the 🤗 Evaluate [quick tour](https://huggingface.co/docs/evaluate/a_quick_tour) to learn more about how to load and compute a metric). Seqeval actually produces several scores: precision, recall, F1, and accuracy.
```py
>>> import evaluate
>>> seqeval = evaluate.load("seqeval")
```
Get the NER labels first, and then create a function that passes your true predictions and true labels to [`~evaluate.EvaluationModule.compute`] to calculate the scores:
```py
>>> import numpy as np
>>> labels = [label_list[i] for i in example[f"ner_tags"]]
>>> def compute_metrics(p):
... predictions, labels = p
... predictions = np.argmax(predictions, axis=2)
... true_predictions = [
... [label_list[p] for (p, l) in zip(prediction, label) if l != -100]
... for prediction, label in zip(predictions, labels)
... ]
... true_labels = [
... [label_list[l] for (p, l) in zip(prediction, label) if l != -100]
... for prediction, label in zip(predictions, labels)
... ]
... results = seqeval.compute(predictions=true_predictions, references=true_labels)
... return {
... "precision": results["overall_precision"],
... "recall": results["overall_recall"],
... "f1": results["overall_f1"],
... "accuracy": results["overall_accuracy"],
... }
```
Your `compute_metrics` function is ready to go now, and you'll return to it when you setup your training.
## Train
Before you start training your model, create a map of the expected ids to their labels with `id2label` and `label2id`:
```py
>>> id2label = {
... 0: "O",
... 1: "B-corporation",
... 2: "I-corporation",
... 3: "B-creative-work",
... 4: "I-creative-work",
... 5: "B-group",
... 6: "I-group",
... 7: "B-location",
... 8: "I-location",
... 9: "B-person",
... 10: "I-person",
... 11: "B-product",
... 12: "I-product",
... }
>>> label2id = {
... "O": 0,
... "B-corporation": 1,
... "I-corporation": 2,
... "B-creative-work": 3,
... "I-creative-work": 4,
... "B-group": 5,
... "I-group": 6,
... "B-location": 7,
... "I-location": 8,
... "B-person": 9,
... "I-person": 10,
... "B-product": 11,
... "I-product": 12,
... }
```
<frameworkcontent>
<pt>
<Tip>
If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the basic tutorial [here](../training#train-with-pytorch-trainer)!
</Tip>
You're ready to start training your model now! Load DistilBERT with [`AutoModelForTokenClassification`] along with the number of expected labels, and the label mappings:
```py
>>> from transformers import AutoModelForTokenClassification, TrainingArguments, Trainer
>>> model = AutoModelForTokenClassification.from_pretrained(
... "distilbert-base-uncased", num_labels=13, id2label=id2label, label2id=label2id
... )
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`TrainingArguments`]. The only required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model). At the end of each epoch, the [`Trainer`] will evaluate the seqeval scores and save the training checkpoint.
2. Pass the training arguments to [`Trainer`] along with the model, dataset, tokenizer, data collator, and `compute_metrics` function.
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> training_args = TrainingArguments(
... output_dir="my_awesome_wnut_model",
... learning_rate=2e-5,
... per_device_train_batch_size=16,
... per_device_eval_batch_size=16,
... num_train_epochs=2,
... weight_decay=0.01,
... evaluation_strategy="epoch",
... save_strategy="epoch",
... load_best_model_at_end=True,
... push_to_hub=True,
... )
>>> trainer = Trainer(
... model=model,
... args=training_args,
... train_dataset=tokenized_wnut["train"],
... eval_dataset=tokenized_wnut["test"],
... tokenizer=tokenizer,
... data_collator=data_collator,
... compute_metrics=compute_metrics,
... )
>>> trainer.train()
```
Once training is completed, share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
</pt>
<tf>
<Tip>
If you aren't familiar with finetuning a model with Keras, take a look at the basic tutorial [here](../training#train-a-tensorflow-model-with-keras)!
</Tip>
To finetune a model in TensorFlow, start by setting up an optimizer function, learning rate schedule, and some training hyperparameters:
```py
>>> from transformers import create_optimizer
>>> batch_size = 16
>>> num_train_epochs = 3
>>> num_train_steps = (len(tokenized_wnut["train"]) // batch_size) * num_train_epochs
>>> optimizer, lr_schedule = create_optimizer(
... init_lr=2e-5,
... num_train_steps=num_train_steps,
... weight_decay_rate=0.01,
... num_warmup_steps=0,
... )
```
Then you can load DistilBERT with [`TFAutoModelForTokenClassification`] along with the number of expected labels, and the label mappings:
```py
>>> from transformers import TFAutoModelForTokenClassification
>>> model = TFAutoModelForTokenClassification.from_pretrained(
... "distilbert-base-uncased", num_labels=13, id2label=id2label, label2id=label2id
... )
```
Convert your datasets to the `tf.data.Dataset` format with [`~transformers.TFPreTrainedModel.prepare_tf_dataset`]:
```py
>>> tf_train_set = model.prepare_tf_dataset(
... tokenized_wnut["train"],
... shuffle=True,
... batch_size=16,
... collate_fn=data_collator,
... )
>>> tf_validation_set = model.prepare_tf_dataset(
... tokenized_wnut["validation"],
... shuffle=False,
... batch_size=16,
... collate_fn=data_collator,
... )
```
Configure the model for training with [`compile`](https://keras.io/api/models/model_training_apis/#compile-method). Note that Transformers models all have a default task-relevant loss function, so you don't need to specify one unless you want to:
```py
>>> import tensorflow as tf
>>> model.compile(optimizer=optimizer) # No loss argument!
```
The last two things to setup before you start training is to compute the seqeval scores from the predictions, and provide a way to push your model to the Hub. Both are done by using [Keras callbacks](../main_classes/keras_callbacks).
Pass your `compute_metrics` function to [`~transformers.KerasMetricCallback`]:
```py
>>> from transformers.keras_callbacks import KerasMetricCallback
>>> metric_callback = KerasMetricCallback(metric_fn=compute_metrics, eval_dataset=tf_validation_set)
```
Specify where to push your model and tokenizer in the [`~transformers.PushToHubCallback`]:
```py
>>> from transformers.keras_callbacks import PushToHubCallback
>>> push_to_hub_callback = PushToHubCallback(
... output_dir="my_awesome_wnut_model",
... tokenizer=tokenizer,
... )
```
Then bundle your callbacks together:
```py
>>> callbacks = [metric_callback, push_to_hub_callback]
```
Finally, you're ready to start training your model! Call [`fit`](https://keras.io/api/models/model_training_apis/#fit-method) with your training and validation datasets, the number of epochs, and your callbacks to finetune the model:
```py
>>> model.fit(x=tf_train_set, validation_data=tf_validation_set, epochs=3, callbacks=callbacks)
```
Once training is completed, your model is automatically uploaded to the Hub so everyone can use it!
</tf>
</frameworkcontent>
<Tip>
For a more in-depth example of how to finetune a model for token classification, take a look at the corresponding
[PyTorch notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/token_classification.ipynb)
or [TensorFlow notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/token_classification-tf.ipynb).
</Tip>
## Inference
Great, now that you've finetuned a model, you can use it for inference!
Grab some text you'd like to run inference on:
```py
>>> text = "The Golden State Warriors are an American professional basketball team based in San Francisco."
```
The simplest way to try out your finetuned model for inference is to use it in a [`pipeline`]. Instantiate a `pipeline` for NER with your model, and pass your text to it:
```py
>>> from transformers import pipeline
>>> classifier = pipeline("ner", model="stevhliu/my_awesome_wnut_model")
>>> classifier(text)
[{'entity': 'B-location',
'score': 0.42658573,
'index': 2,
'word': 'golden',
'start': 4,
'end': 10},
{'entity': 'I-location',
'score': 0.35856336,
'index': 3,
'word': 'state',
'start': 11,
'end': 16},
{'entity': 'B-group',
'score': 0.3064001,
'index': 4,
'word': 'warriors',
'start': 17,
'end': 25},
{'entity': 'B-location',
'score': 0.65523505,
'index': 13,
'word': 'san',
'start': 80,
'end': 83},
{'entity': 'B-location',
'score': 0.4668663,
'index': 14,
'word': 'francisco',
'start': 84,
'end': 93}]
```
You can also manually replicate the results of the `pipeline` if you'd like:
<frameworkcontent>
<pt>
Tokenize the text and return PyTorch tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("stevhliu/my_awesome_wnut_model")
>>> inputs = tokenizer(text, return_tensors="pt")
```
Pass your inputs to the model and return the `logits`:
```py
>>> from transformers import AutoModelForTokenClassification
>>> model = AutoModelForTokenClassification.from_pretrained("stevhliu/my_awesome_wnut_model")
>>> with torch.no_grad():
... logits = model(**inputs).logits
```
Get the class with the highest probability, and use the model's `id2label` mapping to convert it to a text label:
```py
>>> predictions = torch.argmax(logits, dim=2)
>>> predicted_token_class = [model.config.id2label[t.item()] for t in predictions[0]]
>>> predicted_token_class
['O',
'O',
'B-location',
'I-location',
'B-group',
'O',
'O',
'O',
'O',
'O',
'O',
'O',
'O',
'B-location',
'B-location',
'O',
'O']
```
</pt>
<tf>
Tokenize the text and return TensorFlow tensors:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("stevhliu/my_awesome_wnut_model")
>>> inputs = tokenizer(text, return_tensors="tf")
```
Pass your inputs to the model and return the `logits`:
```py
>>> from transformers import TFAutoModelForTokenClassification
>>> model = TFAutoModelForTokenClassification.from_pretrained("stevhliu/my_awesome_wnut_model")
>>> logits = model(**inputs).logits
```
Get the class with the highest probability, and use the model's `id2label` mapping to convert it to a text label:
```py
>>> predicted_token_class_ids = tf.math.argmax(logits, axis=-1)
>>> predicted_token_class = [model.config.id2label[t] for t in predicted_token_class_ids[0].numpy().tolist()]
>>> predicted_token_class
['O',
'O',
'B-location',
'I-location',
'B-group',
'O',
'O',
'O',
'O',
'O',
'O',
'O',
'O',
'B-location',
'B-location',
'O',
'O']
```
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/asr.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Automatic speech recognition
[[open-in-colab]]
<Youtube id="TksaY_FDgnk"/>
Automatic speech recognition (ASR) converts a speech signal to text, mapping a sequence of audio inputs to text outputs. Virtual assistants like Siri and Alexa use ASR models to help users everyday, and there are many other useful user-facing applications like live captioning and note-taking during meetings.
This guide will show you how to:
1. Finetune [Wav2Vec2](https://huggingface.co/facebook/wav2vec2-base) on the [MInDS-14](https://huggingface.co/datasets/PolyAI/minds14) dataset to transcribe audio to text.
2. Use your finetuned model for inference.
<Tip>
The task illustrated in this tutorial is supported by the following model architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[Data2VecAudio](../model_doc/data2vec-audio), [Hubert](../model_doc/hubert), [M-CTC-T](../model_doc/mctct), [SEW](../model_doc/sew), [SEW-D](../model_doc/sew-d), [UniSpeech](../model_doc/unispeech), [UniSpeechSat](../model_doc/unispeech-sat), [Wav2Vec2](../model_doc/wav2vec2), [Wav2Vec2-Conformer](../model_doc/wav2vec2-conformer), [WavLM](../model_doc/wavlm)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install transformers datasets evaluate jiwer
```
We encourage you to login to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to login:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load MInDS-14 dataset
Start by loading a smaller subset of the [MInDS-14](https://huggingface.co/datasets/PolyAI/minds14) dataset from the 🤗 Datasets library. This'll give you a chance to experiment and make sure everything works before spending more time training on the full dataset.
```py
>>> from datasets import load_dataset, Audio
>>> minds = load_dataset("PolyAI/minds14", name="en-US", split="train[:100]")
```
Split the dataset's `train` split into a train and test set with the [`~Dataset.train_test_split`] method:
```py
>>> minds = minds.train_test_split(test_size=0.2)
```
Then take a look at the dataset:
```py
>>> minds
DatasetDict({
train: Dataset({
features: ['path', 'audio', 'transcription', 'english_transcription', 'intent_class', 'lang_id'],
num_rows: 16
})
test: Dataset({
features: ['path', 'audio', 'transcription', 'english_transcription', 'intent_class', 'lang_id'],
num_rows: 4
})
})
```
While the dataset contains a lot of useful information, like `lang_id` and `english_transcription`, you'll focus on the `audio` and `transcription` in this guide. Remove the other columns with the [`~datasets.Dataset.remove_columns`] method:
```py
>>> minds = minds.remove_columns(["english_transcription", "intent_class", "lang_id"])
```
Take a look at the example again:
```py
>>> minds["train"][0]
{'audio': {'array': array([-0.00024414, 0. , 0. , ..., 0.00024414,
0.00024414, 0.00024414], dtype=float32),
'path': '/root/.cache/huggingface/datasets/downloads/extracted/f14948e0e84be638dd7943ac36518a4cf3324e8b7aa331c5ab11541518e9368c/en-US~APP_ERROR/602ba9e2963e11ccd901cd4f.wav',
'sampling_rate': 8000},
'path': '/root/.cache/huggingface/datasets/downloads/extracted/f14948e0e84be638dd7943ac36518a4cf3324e8b7aa331c5ab11541518e9368c/en-US~APP_ERROR/602ba9e2963e11ccd901cd4f.wav',
'transcription': "hi I'm trying to use the banking app on my phone and currently my checking and savings account balance is not refreshing"}
```
There are two fields:
- `audio`: a 1-dimensional `array` of the speech signal that must be called to load and resample the audio file.
- `transcription`: the target text.
## Preprocess
The next step is to load a Wav2Vec2 processor to process the audio signal:
```py
>>> from transformers import AutoProcessor
>>> processor = AutoProcessor.from_pretrained("facebook/wav2vec2-base")
```
The MInDS-14 dataset has a sampling rate of 8000kHz (you can find this information in its [dataset card](https://huggingface.co/datasets/PolyAI/minds14)), which means you'll need to resample the dataset to 16000kHz to use the pretrained Wav2Vec2 model:
```py
>>> minds = minds.cast_column("audio", Audio(sampling_rate=16_000))
>>> minds["train"][0]
{'audio': {'array': array([-2.38064706e-04, -1.58618059e-04, -5.43987835e-06, ...,
2.78103951e-04, 2.38446111e-04, 1.18740834e-04], dtype=float32),
'path': '/root/.cache/huggingface/datasets/downloads/extracted/f14948e0e84be638dd7943ac36518a4cf3324e8b7aa331c5ab11541518e9368c/en-US~APP_ERROR/602ba9e2963e11ccd901cd4f.wav',
'sampling_rate': 16000},
'path': '/root/.cache/huggingface/datasets/downloads/extracted/f14948e0e84be638dd7943ac36518a4cf3324e8b7aa331c5ab11541518e9368c/en-US~APP_ERROR/602ba9e2963e11ccd901cd4f.wav',
'transcription': "hi I'm trying to use the banking app on my phone and currently my checking and savings account balance is not refreshing"}
```
As you can see in the `transcription` above, the text contains a mix of upper and lowercase characters. The Wav2Vec2 tokenizer is only trained on uppercase characters so you'll need to make sure the text matches the tokenizer's vocabulary:
```py
>>> def uppercase(example):
... return {"transcription": example["transcription"].upper()}
>>> minds = minds.map(uppercase)
```
Now create a preprocessing function that:
1. Calls the `audio` column to load and resample the audio file.
2. Extracts the `input_values` from the audio file and tokenize the `transcription` column with the processor.
```py
>>> def prepare_dataset(batch):
... audio = batch["audio"]
... batch = processor(audio["array"], sampling_rate=audio["sampling_rate"], text=batch["transcription"])
... batch["input_length"] = len(batch["input_values"][0])
... return batch
```
To apply the preprocessing function over the entire dataset, use 🤗 Datasets [`~datasets.Dataset.map`] function. You can speed up `map` by increasing the number of processes with the `num_proc` parameter. Remove the columns you don't need with the [`~datasets.Dataset.remove_columns`] method:
```py
>>> encoded_minds = minds.map(prepare_dataset, remove_columns=minds.column_names["train"], num_proc=4)
```
🤗 Transformers doesn't have a data collator for ASR, so you'll need to adapt the [`DataCollatorWithPadding`] to create a batch of examples. It'll also dynamically pad your text and labels to the length of the longest element in its batch (instead of the entire dataset) so they are a uniform length. While it is possible to pad your text in the `tokenizer` function by setting `padding=True`, dynamic padding is more efficient.
Unlike other data collators, this specific data collator needs to apply a different padding method to `input_values` and `labels`:
```py
>>> import torch
>>> from dataclasses import dataclass, field
>>> from typing import Any, Dict, List, Optional, Union
>>> @dataclass
... class DataCollatorCTCWithPadding:
... processor: AutoProcessor
... padding: Union[bool, str] = "longest"
... def __call__(self, features: List[Dict[str, Union[List[int], torch.Tensor]]]) -> Dict[str, torch.Tensor]:
... # split inputs and labels since they have to be of different lengths and need
... # different padding methods
... input_features = [{"input_values": feature["input_values"][0]} for feature in features]
... label_features = [{"input_ids": feature["labels"]} for feature in features]
... batch = self.processor.pad(input_features, padding=self.padding, return_tensors="pt")
... labels_batch = self.processor.pad(labels=label_features, padding=self.padding, return_tensors="pt")
... # replace padding with -100 to ignore loss correctly
... labels = labels_batch["input_ids"].masked_fill(labels_batch.attention_mask.ne(1), -100)
... batch["labels"] = labels
... return batch
```
Now instantiate your `DataCollatorForCTCWithPadding`:
```py
>>> data_collator = DataCollatorCTCWithPadding(processor=processor, padding="longest")
```
## Evaluate
Including a metric during training is often helpful for evaluating your model's performance. You can quickly load a evaluation method with the 🤗 [Evaluate](https://huggingface.co/docs/evaluate/index) library. For this task, load the [word error rate](https://huggingface.co/spaces/evaluate-metric/wer) (WER) metric (see the 🤗 Evaluate [quick tour](https://huggingface.co/docs/evaluate/a_quick_tour) to learn more about how to load and compute a metric):
```py
>>> import evaluate
>>> wer = evaluate.load("wer")
```
Then create a function that passes your predictions and labels to [`~evaluate.EvaluationModule.compute`] to calculate the WER:
```py
>>> import numpy as np
>>> def compute_metrics(pred):
... pred_logits = pred.predictions
... pred_ids = np.argmax(pred_logits, axis=-1)
... pred.label_ids[pred.label_ids == -100] = processor.tokenizer.pad_token_id
... pred_str = processor.batch_decode(pred_ids)
... label_str = processor.batch_decode(pred.label_ids, group_tokens=False)
... wer = wer.compute(predictions=pred_str, references=label_str)
... return {"wer": wer}
```
Your `compute_metrics` function is ready to go now, and you'll return to it when you setup your training.
## Train
<frameworkcontent>
<pt>
<Tip>
If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the basic tutorial [here](../training#train-with-pytorch-trainer)!
</Tip>
You're ready to start training your model now! Load Wav2Vec2 with [`AutoModelForCTC`]. Specify the reduction to apply with the `ctc_loss_reduction` parameter. It is often better to use the average instead of the default summation:
```py
>>> from transformers import AutoModelForCTC, TrainingArguments, Trainer
>>> model = AutoModelForCTC.from_pretrained(
... "facebook/wav2vec2-base",
... ctc_loss_reduction="mean",
... pad_token_id=processor.tokenizer.pad_token_id,
... )
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`TrainingArguments`]. The only required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model). At the end of each epoch, the [`Trainer`] will evaluate the WER and save the training checkpoint.
2. Pass the training arguments to [`Trainer`] along with the model, dataset, tokenizer, data collator, and `compute_metrics` function.
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> training_args = TrainingArguments(
... output_dir="my_awesome_asr_mind_model",
... per_device_train_batch_size=8,
... gradient_accumulation_steps=2,
... learning_rate=1e-5,
... warmup_steps=500,
... max_steps=2000,
... gradient_checkpointing=True,
... fp16=True,
... group_by_length=True,
... evaluation_strategy="steps",
... per_device_eval_batch_size=8,
... save_steps=1000,
... eval_steps=1000,
... logging_steps=25,
... load_best_model_at_end=True,
... metric_for_best_model="wer",
... greater_is_better=False,
... push_to_hub=True,
... )
>>> trainer = Trainer(
... model=model,
... args=training_args,
... train_dataset=encoded_minds["train"],
... eval_dataset=encoded_minds["test"],
... tokenizer=processor,
... data_collator=data_collator,
... compute_metrics=compute_metrics,
... )
>>> trainer.train()
```
Once training is completed, share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
</pt>
</frameworkcontent>
<Tip>
For a more in-depth example of how to finetune a model for automatic speech recognition, take a look at this blog [post](https://huggingface.co/blog/fine-tune-wav2vec2-english) for English ASR and this [post](https://huggingface.co/blog/fine-tune-xlsr-wav2vec2) for multilingual ASR.
</Tip>
## Inference
Great, now that you've finetuned a model, you can use it for inference!
Load an audio file you'd like to run inference on. Remember to resample the sampling rate of the audio file to match the sampling rate of the model if you need to!
```py
>>> from datasets import load_dataset, Audio
>>> dataset = load_dataset("PolyAI/minds14", "en-US", split="train")
>>> dataset = dataset.cast_column("audio", Audio(sampling_rate=16000))
>>> sampling_rate = dataset.features["audio"].sampling_rate
>>> audio_file = dataset[0]["audio"]["path"]
```
The simplest way to try out your finetuned model for inference is to use it in a [`pipeline`]. Instantiate a `pipeline` for automatic speech recognition with your model, and pass your audio file to it:
```py
>>> from transformers import pipeline
>>> transcriber = pipeline("automatic-speech-recognition", model="stevhliu/my_awesome_asr_minds_model")
>>> transcriber(audio_file)
{'text': 'I WOUD LIKE O SET UP JOINT ACOUNT WTH Y PARTNER'}
```
<Tip>
The transcription is decent, but it could be better! Try finetuning your model on more examples to get even better results!
</Tip>
You can also manually replicate the results of the `pipeline` if you'd like:
<frameworkcontent>
<pt>
Load a processor to preprocess the audio file and transcription and return the `input` as PyTorch tensors:
```py
>>> from transformers import AutoProcessor
>>> processor = AutoProcessor.from_pretrained("stevhliu/my_awesome_asr_mind_model")
>>> inputs = processor(dataset[0]["audio"]["array"], sampling_rate=sampling_rate, return_tensors="pt")
```
Pass your inputs to the model and return the logits:
```py
>>> from transformers import AutoModelForCTC
>>> model = AutoModelForCTC.from_pretrained("stevhliu/my_awesome_asr_mind_model")
>>> with torch.no_grad():
... logits = model(**inputs).logits
```
Get the predicted `input_ids` with the highest probability, and use the processor to decode the predicted `input_ids` back into text:
```py
>>> import torch
>>> predicted_ids = torch.argmax(logits, dim=-1)
>>> transcription = processor.batch_decode(predicted_ids)
>>> transcription
['I WOUL LIKE O SET UP JOINT ACOUNT WTH Y PARTNER']
```
</pt>
</frameworkcontent> | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/image_to_image.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Image-to-Image Task Guide
[[open-in-colab]]
Image-to-Image task is the task where an application receives an image and outputs another image. This has various subtasks, including image enhancement (super resolution, low light enhancement, deraining and so on), image inpainting, and more.
This guide will show you how to:
- Use an image-to-image pipeline for super resolution task,
- Run image-to-image models for same task without a pipeline.
Note that as of the time this guide is released, `image-to-image` pipeline only supports super resolution task.
Let's begin by installing the necessary libraries.
```bash
pip install transformers
```
We can now initialize the pipeline with a [Swin2SR model](https://huggingface.co/caidas/swin2SR-lightweight-x2-64). We can then infer with the pipeline by calling it with an image. As of now, only [Swin2SR models](https://huggingface.co/models?sort=trending&search=swin2sr) are supported in this pipeline.
```python
from transformers import pipeline
device = torch.device('cuda' if torch.cuda.is_available() else 'cpu')
pipe = pipeline(task="image-to-image", model="caidas/swin2SR-lightweight-x2-64", device=device)
```
Now, let's load an image.
```python
from PIL import Image
import requests
url = "https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/cat.jpg"
image = Image.open(requests.get(url, stream=True).raw)
print(image.size)
```
```bash
# (532, 432)
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/cat.jpg" alt="Photo of a cat"/>
</div>
We can now do inference with the pipeline. We will get an upscaled version of the cat image.
```python
upscaled = pipe(image)
print(upscaled.size)
```
```bash
# (1072, 880)
```
If you wish to do inference yourself with no pipeline, you can use the `Swin2SRForImageSuperResolution` and `Swin2SRImageProcessor` classes of transformers. We will use the same model checkpoint for this. Let's initialize the model and the processor.
```python
from transformers import Swin2SRForImageSuperResolution, Swin2SRImageProcessor
model = Swin2SRForImageSuperResolution.from_pretrained("caidas/swin2SR-lightweight-x2-64").to(device)
processor = Swin2SRImageProcessor("caidas/swin2SR-lightweight-x2-64")
```
`pipeline` abstracts away the preprocessing and postprocessing steps that we have to do ourselves, so let's preprocess the image. We will pass the image to the processor and then move the pixel values to GPU.
```python
pixel_values = processor(image, return_tensors="pt").pixel_values
print(pixel_values.shape)
pixel_values = pixel_values.to(device)
```
We can now infer the image by passing pixel values to the model.
```python
import torch
with torch.no_grad():
outputs = model(pixel_values)
```
Output is an object of type `ImageSuperResolutionOutput` that looks like below 👇
```
(loss=None, reconstruction=tensor([[[[0.8270, 0.8269, 0.8275, ..., 0.7463, 0.7446, 0.7453],
[0.8287, 0.8278, 0.8283, ..., 0.7451, 0.7448, 0.7457],
[0.8280, 0.8273, 0.8269, ..., 0.7447, 0.7446, 0.7452],
...,
[0.5923, 0.5933, 0.5924, ..., 0.0697, 0.0695, 0.0706],
[0.5926, 0.5932, 0.5926, ..., 0.0673, 0.0687, 0.0705],
[0.5927, 0.5914, 0.5922, ..., 0.0664, 0.0694, 0.0718]]]],
device='cuda:0'), hidden_states=None, attentions=None)
```
We need to get the `reconstruction` and post-process it for visualization. Let's see how it looks like.
```python
outputs.reconstruction.data.shape
# torch.Size([1, 3, 880, 1072])
```
We need to squeeze the output and get rid of axis 0, clip the values, then convert it to be numpy float. Then we will arrange axes to have the shape [1072, 880], and finally, bring the output back to range [0, 255].
```python
import numpy as np
# squeeze, take to CPU and clip the values
output = outputs.reconstruction.data.squeeze().cpu().clamp_(0, 1).numpy()
# rearrange the axes
output = np.moveaxis(output, source=0, destination=-1)
# bring values back to pixel values range
output = (output * 255.0).round().astype(np.uint8)
Image.fromarray(output)
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/cat_upscaled.png" alt="Upscaled photo of a cat"/>
</div>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/idefics.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Image tasks with IDEFICS
[[open-in-colab]]
While individual tasks can be tackled by fine-tuning specialized models, an alternative approach
that has recently emerged and gained popularity is to use large models for a diverse set of tasks without fine-tuning.
For instance, large language models can handle such NLP tasks as summarization, translation, classification, and more.
This approach is no longer limited to a single modality, such as text, and in this guide, we will illustrate how you can
solve image-text tasks with a large multimodal model called IDEFICS.
[IDEFICS](../model_doc/idefics) is an open-access vision and language model based on [Flamingo](https://huggingface.co/papers/2204.14198),
a state-of-the-art visual language model initially developed by DeepMind. The model accepts arbitrary sequences of image
and text inputs and generates coherent text as output. It can answer questions about images, describe visual content,
create stories grounded in multiple images, and so on. IDEFICS comes in two variants - [80 billion parameters](https://huggingface.co/HuggingFaceM4/idefics-80b)
and [9 billion parameters](https://huggingface.co/HuggingFaceM4/idefics-9b), both of which are available on the 🤗 Hub. For each variant, you can also find fine-tuned instructed
versions of the model adapted for conversational use cases.
This model is exceptionally versatile and can be used for a wide range of image and multimodal tasks. However,
being a large model means it requires significant computational resources and infrastructure. It is up to you to decide whether
this approach suits your use case better than fine-tuning specialized models for each individual task.
In this guide, you'll learn how to:
- [Load IDEFICS](#loading-the-model) and [load the quantized version of the model](#loading-the-quantized-version-of-the-model)
- Use IDEFICS for:
- [Image captioning](#image-captioning)
- [Prompted image captioning](#prompted-image-captioning)
- [Few-shot prompting](#few-shot-prompting)
- [Visual question answering](#visual-question-answering)
- [Image classificaiton](#image-classification)
- [Image-guided text generation](#image-guided-text-generation)
- [Run inference in batch mode](#running-inference-in-batch-mode)
- [Run IDEFICS instruct for conversational use](#idefics-instruct-for-conversational-use)
Before you begin, make sure you have all the necessary libraries installed.
```bash
pip install -q bitsandbytes sentencepiece accelerate transformers
```
<Tip>
To run the following examples with a non-quantized version of the model checkpoint you will need at least 20GB of GPU memory.
</Tip>
## Loading the model
Let's start by loading the model's 9 billion parameters checkpoint:
```py
>>> checkpoint = "HuggingFaceM4/idefics-9b"
```
Just like for other Transformers models, you need to load a processor and the model itself from the checkpoint.
The IDEFICS processor wraps a [`LlamaTokenizer`] and IDEFICS image processor into a single processor to take care of
preparing text and image inputs for the model.
```py
>>> import torch
>>> from transformers import IdeficsForVisionText2Text, AutoProcessor
>>> processor = AutoProcessor.from_pretrained(checkpoint)
>>> model = IdeficsForVisionText2Text.from_pretrained(checkpoint, torch_dtype=torch.bfloat16, device_map="auto")
```
Setting `device_map` to `"auto"` will automatically determine how to load and store the model weights in the most optimized
manner given existing devices.
### Quantized model
If high-memory GPU availability is an issue, you can load the quantized version of the model. To load the model and the
processor in 4bit precision, pass a `BitsAndBytesConfig` to the `from_pretrained` method and the model will be compressed
on the fly while loading.
```py
>>> import torch
>>> from transformers import IdeficsForVisionText2Text, AutoProcessor, BitsAndBytesConfig
>>> quantization_config = BitsAndBytesConfig(
... load_in_4bit=True,
... bnb_4bit_compute_dtype=torch.float16,
... )
>>> processor = AutoProcessor.from_pretrained(checkpoint)
>>> model = IdeficsForVisionText2Text.from_pretrained(
... checkpoint,
... quantization_config=quantization_config,
... device_map="auto"
... )
```
Now that you have the model loaded in one of the suggested ways, let's move on to exploring tasks that you can use IDEFICS for.
## Image captioning
Image captioning is the task of predicting a caption for a given image. A common application is to aid visually impaired
people navigate through different situations, for instance, explore image content online.
To illustrate the task, get an image to be captioned, e.g.:
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/idefics-im-captioning.jpg" alt="Image of a puppy in a flower bed"/>
</div>
Photo by [Hendo Wang](https://unsplash.com/@hendoo).
IDEFICS accepts text and image prompts. However, to caption an image, you do not have to provide a text prompt to the
model, only the preprocessed input image. Without a text prompt, the model will start generating text from the
BOS (beginning-of-sequence) token thus creating a caption.
As image input to the model, you can use either an image object (`PIL.Image`) or a url from which the image can be retrieved.
```py
>>> prompt = [
... "https://images.unsplash.com/photo-1583160247711-2191776b4b91?ixlib=rb-4.0.3&ixid=M3wxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8fA%3D%3D&auto=format&fit=crop&w=3542&q=80",
... ]
>>> inputs = processor(prompt, return_tensors="pt").to("cuda")
>>> bad_words_ids = processor.tokenizer(["<image>", "<fake_token_around_image>"], add_special_tokens=False).input_ids
>>> generated_ids = model.generate(**inputs, max_new_tokens=10, bad_words_ids=bad_words_ids)
>>> generated_text = processor.batch_decode(generated_ids, skip_special_tokens=True)
>>> print(generated_text[0])
A puppy in a flower bed
```
<Tip>
It is a good idea to include the `bad_words_ids` in the call to `generate` to avoid errors arising when increasing
the `max_new_tokens`: the model will want to generate a new `<image>` or `<fake_token_around_image>` token when there
is no image being generated by the model.
You can set it on-the-fly as in this guide, or store in the `GenerationConfig` as described in the [Text generation strategies](../generation_strategies) guide.
</Tip>
## Prompted image captioning
You can extend image captioning by providing a text prompt, which the model will continue given the image. Let's take
another image to illustrate:
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/idefics-prompted-im-captioning.jpg" alt="Image of the Eiffel Tower at night"/>
</div>
Photo by [Denys Nevozhai](https://unsplash.com/@dnevozhai).
Textual and image prompts can be passed to the model's processor as a single list to create appropriate inputs.
```py
>>> prompt = [
... "https://images.unsplash.com/photo-1543349689-9a4d426bee8e?ixlib=rb-4.0.3&ixid=M3wxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8fA%3D%3D&auto=format&fit=crop&w=3501&q=80",
... "This is an image of ",
... ]
>>> inputs = processor(prompt, return_tensors="pt").to("cuda")
>>> bad_words_ids = processor.tokenizer(["<image>", "<fake_token_around_image>"], add_special_tokens=False).input_ids
>>> generated_ids = model.generate(**inputs, max_new_tokens=10, bad_words_ids=bad_words_ids)
>>> generated_text = processor.batch_decode(generated_ids, skip_special_tokens=True)
>>> print(generated_text[0])
This is an image of the Eiffel Tower in Paris, France.
```
## Few-shot prompting
While IDEFICS demonstrates great zero-shot results, your task may require a certain format of the caption, or come with
other restrictions or requirements that increase task's complexity. Few-shot prompting can be used to enable in-context learning.
By providing examples in the prompt, you can steer the model to generate results that mimic the format of given examples.
Let's use the previous image of the Eiffel Tower as an example for the model and build a prompt that demonstrates to the model
that in addition to learning what the object in an image is, we would also like to get some interesting information about it.
Then, let's see, if we can get the same response format for an image of the Statue of Liberty:
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/idefics-few-shot.jpg" alt="Image of the Statue of Liberty"/>
</div>
Photo by [Juan Mayobre](https://unsplash.com/@jmayobres).
```py
>>> prompt = ["User:",
... "https://images.unsplash.com/photo-1543349689-9a4d426bee8e?ixlib=rb-4.0.3&ixid=M3wxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8fA%3D%3D&auto=format&fit=crop&w=3501&q=80",
... "Describe this image.\nAssistant: An image of the Eiffel Tower at night. Fun fact: the Eiffel Tower is the same height as an 81-storey building.\n",
... "User:",
... "https://images.unsplash.com/photo-1524099163253-32b7f0256868?ixlib=rb-4.0.3&ixid=M3wxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8fA%3D%3D&auto=format&fit=crop&w=3387&q=80",
... "Describe this image.\nAssistant:"
... ]
>>> inputs = processor(prompt, return_tensors="pt").to("cuda")
>>> bad_words_ids = processor.tokenizer(["<image>", "<fake_token_around_image>"], add_special_tokens=False).input_ids
>>> generated_ids = model.generate(**inputs, max_new_tokens=30, bad_words_ids=bad_words_ids)
>>> generated_text = processor.batch_decode(generated_ids, skip_special_tokens=True)
>>> print(generated_text[0])
User: Describe this image.
Assistant: An image of the Eiffel Tower at night. Fun fact: the Eiffel Tower is the same height as an 81-storey building.
User: Describe this image.
Assistant: An image of the Statue of Liberty. Fun fact: the Statue of Liberty is 151 feet tall.
```
Notice that just from a single example (i.e., 1-shot) the model has learned how to perform the task. For more complex tasks,
feel free to experiment with a larger number of examples (e.g., 3-shot, 5-shot, etc.).
## Visual question answering
Visual Question Answering (VQA) is the task of answering open-ended questions based on an image. Similar to image
captioning it can be used in accessibility applications, but also in education (reasoning about visual materials), customer
service (questions about products based on images), and image retrieval.
Let's get a new image for this task:
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/idefics-vqa.jpg" alt="Image of a couple having a picnic"/>
</div>
Photo by [Jarritos Mexican Soda](https://unsplash.com/@jarritos).
You can steer the model from image captioning to visual question answering by prompting it with appropriate instructions:
```py
>>> prompt = [
... "Instruction: Provide an answer to the question. Use the image to answer.\n",
... "https://images.unsplash.com/photo-1623944889288-cd147dbb517c?ixlib=rb-4.0.3&ixid=M3wxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8fA%3D%3D&auto=format&fit=crop&w=3540&q=80",
... "Question: Where are these people and what's the weather like? Answer:"
... ]
>>> inputs = processor(prompt, return_tensors="pt").to("cuda")
>>> bad_words_ids = processor.tokenizer(["<image>", "<fake_token_around_image>"], add_special_tokens=False).input_ids
>>> generated_ids = model.generate(**inputs, max_new_tokens=20, bad_words_ids=bad_words_ids)
>>> generated_text = processor.batch_decode(generated_ids, skip_special_tokens=True)
>>> print(generated_text[0])
Instruction: Provide an answer to the question. Use the image to answer.
Question: Where are these people and what's the weather like? Answer: They're in a park in New York City, and it's a beautiful day.
```
## Image classification
IDEFICS is capable of classifying images into different categories without being explicitly trained on data containing
labeled examples from those specific categories. Given a list of categories and using its image and text understanding
capabilities, the model can infer which category the image likely belongs to.
Say, we have this image of a vegetable stand:
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/idefics-classification.jpg" alt="Image of a vegetable stand"/>
</div>
Photo by [Peter Wendt](https://unsplash.com/@peterwendt).
We can instruct the model to classify the image into one of the categories that we have:
```py
>>> categories = ['animals','vegetables', 'city landscape', 'cars', 'office']
>>> prompt = [f"Instruction: Classify the following image into a single category from the following list: {categories}.\n",
... "https://images.unsplash.com/photo-1471193945509-9ad0617afabf?ixlib=rb-4.0.3&ixid=M3wxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8fA%3D%3D&auto=format&fit=crop&w=3540&q=80",
... "Category: "
... ]
>>> inputs = processor(prompt, return_tensors="pt").to("cuda")
>>> bad_words_ids = processor.tokenizer(["<image>", "<fake_token_around_image>"], add_special_tokens=False).input_ids
>>> generated_ids = model.generate(**inputs, max_new_tokens=6, bad_words_ids=bad_words_ids)
>>> generated_text = processor.batch_decode(generated_ids, skip_special_tokens=True)
>>> print(generated_text[0])
Instruction: Classify the following image into a single category from the following list: ['animals', 'vegetables', 'city landscape', 'cars', 'office'].
Category: Vegetables
```
In the example above we instruct the model to classify the image into a single category, however, you can also prompt the model to do rank classification.
## Image-guided text generation
For more creative applications, you can use image-guided text generation to generate text based on an image. This can be
useful to create descriptions of products, ads, descriptions of a scene, etc.
Let's prompt IDEFICS to write a story based on a simple image of a red door:
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/idefics-story-generation.jpg" alt="Image of a red door with a pumpkin on the steps"/>
</div>
Photo by [Craig Tidball](https://unsplash.com/@devonshiremedia).
```py
>>> prompt = ["Instruction: Use the image to write a story. \n",
... "https://images.unsplash.com/photo-1517086822157-2b0358e7684a?ixlib=rb-4.0.3&ixid=M3wxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8fA%3D%3D&auto=format&fit=crop&w=2203&q=80",
... "Story: \n"]
>>> inputs = processor(prompt, return_tensors="pt").to("cuda")
>>> bad_words_ids = processor.tokenizer(["<image>", "<fake_token_around_image>"], add_special_tokens=False).input_ids
>>> generated_ids = model.generate(**inputs, num_beams=2, max_new_tokens=200, bad_words_ids=bad_words_ids)
>>> generated_text = processor.batch_decode(generated_ids, skip_special_tokens=True)
>>> print(generated_text[0])
Instruction: Use the image to write a story.
Story:
Once upon a time, there was a little girl who lived in a house with a red door. She loved her red door. It was the prettiest door in the whole world.
One day, the little girl was playing in her yard when she noticed a man standing on her doorstep. He was wearing a long black coat and a top hat.
The little girl ran inside and told her mother about the man.
Her mother said, “Don’t worry, honey. He’s just a friendly ghost.”
The little girl wasn’t sure if she believed her mother, but she went outside anyway.
When she got to the door, the man was gone.
The next day, the little girl was playing in her yard again when she noticed the man standing on her doorstep.
He was wearing a long black coat and a top hat.
The little girl ran
```
Looks like IDEFICS noticed the pumpkin on the doorstep and went with a spooky Halloween story about a ghost.
<Tip>
For longer outputs like this, you will greatly benefit from tweaking the text generation strategy. This can help
you significantly improve the quality of the generated output. Check out [Text generation strategies](../generation_strategies)
to learn more.
</Tip>
## Running inference in batch mode
All of the earlier sections illustrated IDEFICS for a single example. In a very similar fashion, you can run inference
for a batch of examples by passing a list of prompts:
```py
>>> prompts = [
... [ "https://images.unsplash.com/photo-1543349689-9a4d426bee8e?ixlib=rb-4.0.3&ixid=M3wxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8fA%3D%3D&auto=format&fit=crop&w=3501&q=80",
... "This is an image of ",
... ],
... [ "https://images.unsplash.com/photo-1623944889288-cd147dbb517c?ixlib=rb-4.0.3&ixid=M3wxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8fA%3D%3D&auto=format&fit=crop&w=3540&q=80",
... "This is an image of ",
... ],
... [ "https://images.unsplash.com/photo-1471193945509-9ad0617afabf?ixlib=rb-4.0.3&ixid=M3wxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8fA%3D%3D&auto=format&fit=crop&w=3540&q=80",
... "This is an image of ",
... ],
... ]
>>> inputs = processor(prompts, return_tensors="pt").to("cuda")
>>> bad_words_ids = processor.tokenizer(["<image>", "<fake_token_around_image>"], add_special_tokens=False).input_ids
>>> generated_ids = model.generate(**inputs, max_new_tokens=10, bad_words_ids=bad_words_ids)
>>> generated_text = processor.batch_decode(generated_ids, skip_special_tokens=True)
>>> for i,t in enumerate(generated_text):
... print(f"{i}:\n{t}\n")
0:
This is an image of the Eiffel Tower in Paris, France.
1:
This is an image of a couple on a picnic blanket.
2:
This is an image of a vegetable stand.
```
## IDEFICS instruct for conversational use
For conversational use cases, you can find fine-tuned instructed versions of the model on the 🤗 Hub:
`HuggingFaceM4/idefics-80b-instruct` and `HuggingFaceM4/idefics-9b-instruct`.
These checkpoints are the result of fine-tuning the respective base models on a mixture of supervised and instruction
fine-tuning datasets, which boosts the downstream performance while making the models more usable in conversational settings.
The use and prompting for the conversational use is very similar to using the base models:
```py
>>> import torch
>>> from transformers import IdeficsForVisionText2Text, AutoProcessor
>>> device = "cuda" if torch.cuda.is_available() else "cpu"
>>> checkpoint = "HuggingFaceM4/idefics-9b-instruct"
>>> model = IdeficsForVisionText2Text.from_pretrained(checkpoint, torch_dtype=torch.bfloat16).to(device)
>>> processor = AutoProcessor.from_pretrained(checkpoint)
>>> prompts = [
... [
... "User: What is in this image?",
... "https://upload.wikimedia.org/wikipedia/commons/8/86/Id%C3%A9fix.JPG",
... "<end_of_utterance>",
... "\nAssistant: This picture depicts Idefix, the dog of Obelix in Asterix and Obelix. Idefix is running on the ground.<end_of_utterance>",
... "\nUser:",
... "https://static.wikia.nocookie.net/asterix/images/2/25/R22b.gif/revision/latest?cb=20110815073052",
... "And who is that?<end_of_utterance>",
... "\nAssistant:",
... ],
... ]
>>> # --batched mode
>>> inputs = processor(prompts, add_end_of_utterance_token=False, return_tensors="pt").to(device)
>>> # --single sample mode
>>> # inputs = processor(prompts[0], return_tensors="pt").to(device)
>>> # Generation args
>>> exit_condition = processor.tokenizer("<end_of_utterance>", add_special_tokens=False).input_ids
>>> bad_words_ids = processor.tokenizer(["<image>", "<fake_token_around_image>"], add_special_tokens=False).input_ids
>>> generated_ids = model.generate(**inputs, eos_token_id=exit_condition, bad_words_ids=bad_words_ids, max_length=100)
>>> generated_text = processor.batch_decode(generated_ids, skip_special_tokens=True)
>>> for i, t in enumerate(generated_text):
... print(f"{i}:\n{t}\n")
```
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/zero_shot_object_detection.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Zero-shot object detection
[[open-in-colab]]
Traditionally, models used for [object detection](object_detection) require labeled image datasets for training,
and are limited to detecting the set of classes from the training data.
Zero-shot object detection is supported by the [OWL-ViT](../model_doc/owlvit) model which uses a different approach. OWL-ViT
is an open-vocabulary object detector. It means that it can detect objects in images based on free-text queries without
the need to fine-tune the model on labeled datasets.
OWL-ViT leverages multi-modal representations to perform open-vocabulary detection. It combines [CLIP](../model_doc/clip) with
lightweight object classification and localization heads. Open-vocabulary detection is achieved by embedding free-text queries with the text encoder of CLIP and using them as input to the object classification and localization heads.
associate images and their corresponding textual descriptions, and ViT processes image patches as inputs. The authors
of OWL-ViT first trained CLIP from scratch and then fine-tuned OWL-ViT end to end on standard object detection datasets using
a bipartite matching loss.
With this approach, the model can detect objects based on textual descriptions without prior training on labeled datasets.
In this guide, you will learn how to use OWL-ViT:
- to detect objects based on text prompts
- for batch object detection
- for image-guided object detection
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install -q transformers
```
## Zero-shot object detection pipeline
The simplest way to try out inference with OWL-ViT is to use it in a [`pipeline`]. Instantiate a pipeline
for zero-shot object detection from a [checkpoint on the Hugging Face Hub](https://huggingface.co/models?other=owlvit):
```python
>>> from transformers import pipeline
>>> checkpoint = "google/owlvit-base-patch32"
>>> detector = pipeline(model=checkpoint, task="zero-shot-object-detection")
```
Next, choose an image you'd like to detect objects in. Here we'll use the image of astronaut Eileen Collins that is
a part of the [NASA](https://www.nasa.gov/multimedia/imagegallery/index.html) Great Images dataset.
```py
>>> import skimage
>>> import numpy as np
>>> from PIL import Image
>>> image = skimage.data.astronaut()
>>> image = Image.fromarray(np.uint8(image)).convert("RGB")
>>> image
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/zero-sh-obj-detection_1.png" alt="Astronaut Eileen Collins"/>
</div>
Pass the image and the candidate object labels to look for to the pipeline.
Here we pass the image directly; other suitable options include a local path to an image or an image url. We also pass text descriptions for all items we want to query the image for.
```py
>>> predictions = detector(
... image,
... candidate_labels=["human face", "rocket", "nasa badge", "star-spangled banner"],
... )
>>> predictions
[{'score': 0.3571370542049408,
'label': 'human face',
'box': {'xmin': 180, 'ymin': 71, 'xmax': 271, 'ymax': 178}},
{'score': 0.28099656105041504,
'label': 'nasa badge',
'box': {'xmin': 129, 'ymin': 348, 'xmax': 206, 'ymax': 427}},
{'score': 0.2110239565372467,
'label': 'rocket',
'box': {'xmin': 350, 'ymin': -1, 'xmax': 468, 'ymax': 288}},
{'score': 0.13790413737297058,
'label': 'star-spangled banner',
'box': {'xmin': 1, 'ymin': 1, 'xmax': 105, 'ymax': 509}},
{'score': 0.11950037628412247,
'label': 'nasa badge',
'box': {'xmin': 277, 'ymin': 338, 'xmax': 327, 'ymax': 380}},
{'score': 0.10649408400058746,
'label': 'rocket',
'box': {'xmin': 358, 'ymin': 64, 'xmax': 424, 'ymax': 280}}]
```
Let's visualize the predictions:
```py
>>> from PIL import ImageDraw
>>> draw = ImageDraw.Draw(image)
>>> for prediction in predictions:
... box = prediction["box"]
... label = prediction["label"]
... score = prediction["score"]
... xmin, ymin, xmax, ymax = box.values()
... draw.rectangle((xmin, ymin, xmax, ymax), outline="red", width=1)
... draw.text((xmin, ymin), f"{label}: {round(score,2)}", fill="white")
>>> image
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/zero-sh-obj-detection_2.png" alt="Visualized predictions on NASA image"/>
</div>
## Text-prompted zero-shot object detection by hand
Now that you've seen how to use the zero-shot object detection pipeline, let's replicate the same
result manually.
Start by loading the model and associated processor from a [checkpoint on the Hugging Face Hub](https://huggingface.co/models?other=owlvit).
Here we'll use the same checkpoint as before:
```py
>>> from transformers import AutoProcessor, AutoModelForZeroShotObjectDetection
>>> model = AutoModelForZeroShotObjectDetection.from_pretrained(checkpoint)
>>> processor = AutoProcessor.from_pretrained(checkpoint)
```
Let's take a different image to switch things up.
```py
>>> import requests
>>> url = "https://unsplash.com/photos/oj0zeY2Ltk4/download?ixid=MnwxMjA3fDB8MXxzZWFyY2h8MTR8fHBpY25pY3xlbnwwfHx8fDE2Nzc0OTE1NDk&force=true&w=640"
>>> im = Image.open(requests.get(url, stream=True).raw)
>>> im
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/zero-sh-obj-detection_3.png" alt="Beach photo"/>
</div>
Use the processor to prepare the inputs for the model. The processor combines an image processor that prepares the
image for the model by resizing and normalizing it, and a [`CLIPTokenizer`] that takes care of the text inputs.
```py
>>> text_queries = ["hat", "book", "sunglasses", "camera"]
>>> inputs = processor(text=text_queries, images=im, return_tensors="pt")
```
Pass the inputs through the model, post-process, and visualize the results. Since the image processor resized images before
feeding them to the model, you need to use the [`~OwlViTImageProcessor.post_process_object_detection`] method to make sure the predicted bounding
boxes have the correct coordinates relative to the original image:
```py
>>> import torch
>>> with torch.no_grad():
... outputs = model(**inputs)
... target_sizes = torch.tensor([im.size[::-1]])
... results = processor.post_process_object_detection(outputs, threshold=0.1, target_sizes=target_sizes)[0]
>>> draw = ImageDraw.Draw(im)
>>> scores = results["scores"].tolist()
>>> labels = results["labels"].tolist()
>>> boxes = results["boxes"].tolist()
>>> for box, score, label in zip(boxes, scores, labels):
... xmin, ymin, xmax, ymax = box
... draw.rectangle((xmin, ymin, xmax, ymax), outline="red", width=1)
... draw.text((xmin, ymin), f"{text_queries[label]}: {round(score,2)}", fill="white")
>>> im
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/zero-sh-obj-detection_4.png" alt="Beach photo with detected objects"/>
</div>
## Batch processing
You can pass multiple sets of images and text queries to search for different (or same) objects in several images.
Let's use both an astronaut image and the beach image together.
For batch processing, you should pass text queries as a nested list to the processor and images as lists of PIL images,
PyTorch tensors, or NumPy arrays.
```py
>>> images = [image, im]
>>> text_queries = [
... ["human face", "rocket", "nasa badge", "star-spangled banner"],
... ["hat", "book", "sunglasses", "camera"],
... ]
>>> inputs = processor(text=text_queries, images=images, return_tensors="pt")
```
Previously for post-processing you passed the single image's size as a tensor, but you can also pass a tuple, or, in case
of several images, a list of tuples. Let's create predictions for the two examples, and visualize the second one (`image_idx = 1`).
```py
>>> with torch.no_grad():
... outputs = model(**inputs)
... target_sizes = [x.size[::-1] for x in images]
... results = processor.post_process_object_detection(outputs, threshold=0.1, target_sizes=target_sizes)
>>> image_idx = 1
>>> draw = ImageDraw.Draw(images[image_idx])
>>> scores = results[image_idx]["scores"].tolist()
>>> labels = results[image_idx]["labels"].tolist()
>>> boxes = results[image_idx]["boxes"].tolist()
>>> for box, score, label in zip(boxes, scores, labels):
... xmin, ymin, xmax, ymax = box
... draw.rectangle((xmin, ymin, xmax, ymax), outline="red", width=1)
... draw.text((xmin, ymin), f"{text_queries[image_idx][label]}: {round(score,2)}", fill="white")
>>> images[image_idx]
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/zero-sh-obj-detection_4.png" alt="Beach photo with detected objects"/>
</div>
## Image-guided object detection
In addition to zero-shot object detection with text queries, OWL-ViT offers image-guided object detection. This means
you can use an image query to find similar objects in the target image.
Unlike text queries, only a single example image is allowed.
Let's take an image with two cats on a couch as a target image, and an image of a single cat
as a query:
```py
>>> url = "http://images.cocodataset.org/val2017/000000039769.jpg"
>>> image_target = Image.open(requests.get(url, stream=True).raw)
>>> query_url = "http://images.cocodataset.org/val2017/000000524280.jpg"
>>> query_image = Image.open(requests.get(query_url, stream=True).raw)
```
Let's take a quick look at the images:
```py
>>> import matplotlib.pyplot as plt
>>> fig, ax = plt.subplots(1, 2)
>>> ax[0].imshow(image_target)
>>> ax[1].imshow(query_image)
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/zero-sh-obj-detection_5.png" alt="Cats"/>
</div>
In the preprocessing step, instead of text queries, you now need to use `query_images`:
```py
>>> inputs = processor(images=image_target, query_images=query_image, return_tensors="pt")
```
For predictions, instead of passing the inputs to the model, pass them to [`~OwlViTForObjectDetection.image_guided_detection`]. Draw the predictions
as before except now there are no labels.
```py
>>> with torch.no_grad():
... outputs = model.image_guided_detection(**inputs)
... target_sizes = torch.tensor([image_target.size[::-1]])
... results = processor.post_process_image_guided_detection(outputs=outputs, target_sizes=target_sizes)[0]
>>> draw = ImageDraw.Draw(image_target)
>>> scores = results["scores"].tolist()
>>> boxes = results["boxes"].tolist()
>>> for box, score, label in zip(boxes, scores, labels):
... xmin, ymin, xmax, ymax = box
... draw.rectangle((xmin, ymin, xmax, ymax), outline="white", width=4)
>>> image_target
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/zero-sh-obj-detection_6.png" alt="Cats with bounding boxes"/>
</div>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/prompting.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# LLM prompting guide
[[open-in-colab]]
Large Language Models such as Falcon, LLaMA, etc. are pretrained transformer models initially trained to predict the
next token given some input text. They typically have billions of parameters and have been trained on trillions of
tokens for an extended period of time. As a result, these models become quite powerful and versatile, and you can use
them to solve multiple NLP tasks out of the box by instructing the models with natural language prompts.
Designing such prompts to ensure the optimal output is often called "prompt engineering". Prompt engineering is an
iterative process that requires a fair amount of experimentation. Natural languages are much more flexible and expressive
than programming languages, however, they can also introduce some ambiguity. At the same time, prompts in natural language
are quite sensitive to changes. Even minor modifications in prompts can lead to wildly different outputs.
While there is no exact recipe for creating prompts to match all cases, researchers have worked out a number of best
practices that help to achieve optimal results more consistently.
This guide covers the prompt engineering best practices to help you craft better LLM prompts and solve various NLP tasks.
You'll learn:
- [Basics of prompting](#basic-prompts)
- [Best practices of LLM prompting](#best-practices-of-llm-prompting)
- [Advanced prompting techniques: few-shot prompting and chain-of-thought](#advanced-prompting-techniques)
- [When to fine-tune instead of prompting](#prompting-vs-fine-tuning)
<Tip>
Prompt engineering is only a part of the LLM output optimization process. Another essential component is choosing the
optimal text generation strategy. You can customize how your LLM selects each of the subsequent tokens when generating
the text without modifying any of the trainable parameters. By tweaking the text generation parameters, you can reduce
repetition in the generated text and make it more coherent and human-sounding.
Text generation strategies and parameters are out of scope for this guide, but you can learn more about these topics in
the following guides:
* [Generation with LLMs](../llm_tutorial)
* [Text generation strategies](../generation_strategies)
</Tip>
## Basics of prompting
### Types of models
The majority of modern LLMs are decoder-only transformers. Some examples include: [LLaMA](../model_doc/llama),
[Llama2](../model_doc/llama2), [Falcon](../model_doc/falcon), [GPT2](../model_doc/gpt2). However, you may encounter
encoder-decoder transformer LLMs as well, for instance, [Flan-T5](../model_doc/flan-t5) and [BART](../model_doc/bart).
Encoder-decoder-style models are typically used in generative tasks where the output **heavily** relies on the input, for
example, in translation and summarization. The decoder-only models are used for all other types of generative tasks.
When using a pipeline to generate text with an LLM, it's important to know what type of LLM you are using, because
they use different pipelines.
Run inference with decoder-only models with the `text-generation` pipeline:
```python
>>> from transformers import pipeline
>>> import torch
>>> torch.manual_seed(0) # doctest: +IGNORE_RESULT
>>> generator = pipeline('text-generation', model = 'gpt2')
>>> prompt = "Hello, I'm a language model"
>>> generator(prompt, max_length = 30)
[{'generated_text': "Hello, I'm a language model expert, so I'm a big believer in the concept that I know very well and then I try to look into"}]
```
To run inference with an encoder-decoder, use the `text2text-generation` pipeline:
```python
>>> text2text_generator = pipeline("text2text-generation", model = 'google/flan-t5-base')
>>> prompt = "Translate from English to French: I'm very happy to see you"
>>> text2text_generator(prompt)
[{'generated_text': 'Je suis très heureuse de vous rencontrer.'}]
```
### Base vs instruct/chat models
Most of the recent LLM checkpoints available on 🤗 Hub come in two versions: base and instruct (or chat). For example,
[`tiiuae/falcon-7b`](https://huggingface.co/tiiuae/falcon-7b) and [`tiiuae/falcon-7b-instruct`](https://huggingface.co/tiiuae/falcon-7b-instruct).
Base models are excellent at completing the text when given an initial prompt, however, they are not ideal for NLP tasks
where they need to follow instructions, or for conversational use. This is where the instruct (chat) versions come in.
These checkpoints are the result of further fine-tuning of the pre-trained base versions on instructions and conversational data.
This additional fine-tuning makes them a better choice for many NLP tasks.
Let's illustrate some simple prompts that you can use with [`tiiuae/falcon-7b-instruct`](https://huggingface.co/tiiuae/falcon-7b-instruct)
to solve some common NLP tasks.
### NLP tasks
First, let's set up the environment:
```bash
pip install -q transformers accelerate
```
Next, let's load the model with the appropriate pipeline (`"text-generation"`):
```python
>>> from transformers import pipeline, AutoTokenizer
>>> import torch
>>> torch.manual_seed(0) # doctest: +IGNORE_RESULT
>>> model = "tiiuae/falcon-7b-instruct"
>>> tokenizer = AutoTokenizer.from_pretrained(model)
>>> pipe = pipeline(
... "text-generation",
... model=model,
... tokenizer=tokenizer,
... torch_dtype=torch.bfloat16,
... device_map="auto",
... )
```
<Tip>
Note that Falcon models were trained using the `bfloat16` datatype, so we recommend you use the same. This requires a recent
version of CUDA and works best on modern cards.
</Tip>
Now that we have the model loaded via the pipeline, let's explore how you can use prompts to solve NLP tasks.
#### Text classification
One of the most common forms of text classification is sentiment analysis, which assigns a label like "positive", "negative",
or "neutral" to a sequence of text. Let's write a prompt that instructs the model to classify a given text (a movie review).
We'll start by giving the instruction, and then specifying the text to classify. Note that instead of leaving it at that, we're
also adding the beginning of the response - `"Sentiment: "`:
```python
>>> torch.manual_seed(0) # doctest: +IGNORE_RESULT
>>> prompt = """Classify the text into neutral, negative or positive.
... Text: This movie is definitely one of my favorite movies of its kind. The interaction between respectable and morally strong characters is an ode to chivalry and the honor code amongst thieves and policemen.
... Sentiment:
... """
>>> sequences = pipe(
... prompt,
... max_new_tokens=10,
... )
>>> for seq in sequences:
... print(f"Result: {seq['generated_text']}")
Result: Classify the text into neutral, negative or positive.
Text: This movie is definitely one of my favorite movies of its kind. The interaction between respectable and morally strong characters is an ode to chivalry and the honor code amongst thieves and policemen.
Sentiment:
Positive
```
As a result, the output contains a classification label from the list we have provided in the instructions, and it is a correct one!
<Tip>
You may notice that in addition to the prompt, we pass a `max_new_tokens` parameter. It controls the number of tokens the
model shall generate, and it is one of the many text generation parameters that you can learn about
in [Text generation strategies](../generation_strategies) guide.
</Tip>
#### Named Entity Recognition
Named Entity Recognition (NER) is a task of finding named entities in a piece of text, such as a person, location, or organization.
Let's modify the instructions in the prompt to make the LLM perform this task. Here, let's also set `return_full_text = False`
so that output doesn't contain the prompt:
```python
>>> torch.manual_seed(1) # doctest: +IGNORE_RESULT
>>> prompt = """Return a list of named entities in the text.
... Text: The Golden State Warriors are an American professional basketball team based in San Francisco.
... Named entities:
... """
>>> sequences = pipe(
... prompt,
... max_new_tokens=15,
... return_full_text = False,
... )
>>> for seq in sequences:
... print(f"{seq['generated_text']}")
- Golden State Warriors
- San Francisco
```
As you can see, the model correctly identified two named entities from the given text.
#### Translation
Another task LLMs can perform is translation. You can choose to use encoder-decoder models for this task, however, here,
for the simplicity of the examples, we'll keep using Falcon-7b-instruct, which does a decent job. Once again, here's how
you can write a basic prompt to instruct a model to translate a piece of text from English to Italian:
```python
>>> torch.manual_seed(2) # doctest: +IGNORE_RESULT
>>> prompt = """Translate the English text to Italian.
... Text: Sometimes, I've believed as many as six impossible things before breakfast.
... Translation:
... """
>>> sequences = pipe(
... prompt,
... max_new_tokens=20,
... do_sample=True,
... top_k=10,
... return_full_text = False,
... )
>>> for seq in sequences:
... print(f"{seq['generated_text']}")
A volte, ho creduto a sei impossibili cose prima di colazione.
```
Here we've added a `do_sample=True` and `top_k=10` to allow the model to be a bit more flexible when generating output.
#### Text summarization
Similar to the translation, text summarization is another generative task where the output **heavily** relies on the input,
and encoder-decoder models can be a better choice. However, decoder-style models can be used for this task as well.
Previously, we have placed the instructions at the very beginning of the prompt. However, the very end of the prompt can
also be a suitable location for instructions. Typically, it's better to place the instruction on one of the extreme ends.
```python
>>> torch.manual_seed(3) # doctest: +IGNORE_RESULT
>>> prompt = """Permaculture is a design process mimicking the diversity, functionality and resilience of natural ecosystems. The principles and practices are drawn from traditional ecological knowledge of indigenous cultures combined with modern scientific understanding and technological innovations. Permaculture design provides a framework helping individuals and communities develop innovative, creative and effective strategies for meeting basic needs while preparing for and mitigating the projected impacts of climate change.
... Write a summary of the above text.
... Summary:
... """
>>> sequences = pipe(
... prompt,
... max_new_tokens=30,
... do_sample=True,
... top_k=10,
... return_full_text = False,
... )
>>> for seq in sequences:
... print(f"{seq['generated_text']}")
Permaculture is an ecological design mimicking natural ecosystems to meet basic needs and prepare for climate change. It is based on traditional knowledge and scientific understanding.
```
#### Question answering
For question answering task we can structure the prompt into the following logical components: instructions, context, question, and
the leading word or phrase (`"Answer:"`) to nudge the model to start generating the answer:
```python
>>> torch.manual_seed(4) # doctest: +IGNORE_RESULT
>>> prompt = """Answer the question using the context below.
... Context: Gazpacho is a cold soup and drink made of raw, blended vegetables. Most gazpacho includes stale bread, tomato, cucumbers, onion, bell peppers, garlic, olive oil, wine vinegar, water, and salt. Northern recipes often include cumin and/or pimentón (smoked sweet paprika). Traditionally, gazpacho was made by pounding the vegetables in a mortar with a pestle; this more laborious method is still sometimes used as it helps keep the gazpacho cool and avoids the foam and silky consistency of smoothie versions made in blenders or food processors.
... Question: What modern tool is used to make gazpacho?
... Answer:
... """
>>> sequences = pipe(
... prompt,
... max_new_tokens=10,
... do_sample=True,
... top_k=10,
... return_full_text = False,
... )
>>> for seq in sequences:
... print(f"Result: {seq['generated_text']}")
Result: Modern tools are used, such as immersion blenders
```
#### Reasoning
Reasoning is one of the most difficult tasks for LLMs, and achieving good results often requires applying advanced prompting techniques, like
[Chain-of-though](#chain-of-thought).
Let's try if we can make a model reason about a simple arithmetics task with a basic prompt:
```python
>>> torch.manual_seed(5) # doctest: +IGNORE_RESULT
>>> prompt = """There are 5 groups of students in the class. Each group has 4 students. How many students are there in the class?"""
>>> sequences = pipe(
... prompt,
... max_new_tokens=30,
... do_sample=True,
... top_k=10,
... return_full_text = False,
... )
>>> for seq in sequences:
... print(f"Result: {seq['generated_text']}")
Result:
There are a total of 5 groups, so there are 5 x 4=20 students in the class.
```
Correct! Let's increase the complexity a little and see if we can still get away with a basic prompt:
```python
>>> torch.manual_seed(6) # doctest: +IGNORE_RESULT
>>> prompt = """I baked 15 muffins. I ate 2 muffins and gave 5 muffins to a neighbor. My partner then bought 6 more muffins and ate 2. How many muffins do we now have?"""
>>> sequences = pipe(
... prompt,
... max_new_tokens=10,
... do_sample=True,
... top_k=10,
... return_full_text = False,
... )
>>> for seq in sequences:
... print(f"Result: {seq['generated_text']}")
Result:
The total number of muffins now is 21
```
This is a wrong answer, it should be 12. In this case, this can be due to the prompt being too basic, or due to the choice
of model, after all we've picked the smallest version of Falcon. Reasoning is difficult for models of all sizes, but larger
models are likely to perform better.
## Best practices of LLM prompting
In this section of the guide we have compiled a list of best practices that tend to improve the prompt results:
* When choosing the model to work with, the latest and most capable models are likely to perform better.
* Start with a simple and short prompt, and iterate from there.
* Put the instructions at the beginning of the prompt, or at the very end. When working with large context, models apply various optimizations to prevent Attention complexity from scaling quadratically. This may make a model more attentive to the beginning or end of a prompt than the middle.
* Clearly separate instructions from the text they apply to - more on this in the next section.
* Be specific and descriptive about the task and the desired outcome - its format, length, style, language, etc.
* Avoid ambiguous descriptions and instructions.
* Favor instructions that say "what to do" instead of those that say "what not to do".
* "Lead" the output in the right direction by writing the first word (or even begin the first sentence for the model).
* Use advanced techniques like [Few-shot prompting](#few-shot-prompting) and [Chain-of-thought](#chain-of-thought)
* Test your prompts with different models to assess their robustness.
* Version and track the performance of your prompts.
## Advanced prompting techniques
### Few-shot prompting
The basic prompts in the sections above are the examples of "zero-shot" prompts, meaning, the model has been given
instructions and context, but no examples with solutions. LLMs that have been fine-tuned on instruction datasets, generally
perform well on such "zero-shot" tasks. However, you may find that your task has more complexity or nuance, and, perhaps,
you have some requirements for the output that the model doesn't catch on just from the instructions. In this case, you can
try the technique called few-shot prompting.
In few-shot prompting, we provide examples in the prompt giving the model more context to improve the performance.
The examples condition the model to generate the output following the patterns in the examples.
Here's an example:
```python
>>> torch.manual_seed(0) # doctest: +IGNORE_RESULT
>>> prompt = """Text: The first human went into space and orbited the Earth on April 12, 1961.
... Date: 04/12/1961
... Text: The first-ever televised presidential debate in the United States took place on September 28, 1960, between presidential candidates John F. Kennedy and Richard Nixon.
... Date:"""
>>> sequences = pipe(
... prompt,
... max_new_tokens=8,
... do_sample=True,
... top_k=10,
... )
>>> for seq in sequences:
... print(f"Result: {seq['generated_text']}")
Result: Text: The first human went into space and orbited the Earth on April 12, 1961.
Date: 04/12/1961
Text: The first-ever televised presidential debate in the United States took place on September 28, 1960, between presidential candidates John F. Kennedy and Richard Nixon.
Date: 09/28/1960
```
In the above code snippet we used a single example to demonstrate the desired output to the model, so this can be called a
"one-shot" prompting. However, depending on the task complexity you may need to use more than one example.
Limitations of the few-shot prompting technique:
- While LLMs can pick up on the patterns in the examples, these technique doesn't work well on complex reasoning tasks
- Few-shot prompting requires creating lengthy prompts. Prompts with large number of tokens can increase computation and latency. There's also a limit to the length of the prompts.
- Sometimes when given a number of examples, models can learn patterns that you didn't intend them to learn, e.g. that the third movie review is always negative.
### Chain-of-thought
Chain-of-thought (CoT) prompting is a technique that nudges a model to produce intermediate reasoning steps thus improving
the results on complex reasoning tasks.
There are two ways of steering a model to producing the reasoning steps:
- few-shot prompting by illustrating examples with detailed answers to questions, showing the model how to work through a problem.
- by instructing the model to reason by adding phrases like "Let's think step by step" or "Take a deep breath and work through the problem step by step."
If we apply the CoT technique to the muffins example from the [reasoning section](#reasoning) and use a larger model,
such as (`tiiuae/falcon-180B-chat`) which you can play with in the [HuggingChat](https://huggingface.co/chat/),
we'll get a significant improvement on the reasoning result:
```text
Let's go through this step-by-step:
1. You start with 15 muffins.
2. You eat 2 muffins, leaving you with 13 muffins.
3. You give 5 muffins to your neighbor, leaving you with 8 muffins.
4. Your partner buys 6 more muffins, bringing the total number of muffins to 14.
5. Your partner eats 2 muffins, leaving you with 12 muffins.
Therefore, you now have 12 muffins.
```
## Prompting vs fine-tuning
You can achieve great results by optimizing your prompts, however, you may still ponder whether fine-tuning a model
would work better for your case. Here are some scenarios when fine-tuning a smaller model may be a preferred option:
- Your domain is wildly different from what LLMs were pre-trained on and extensive prompt optimization did not yield sufficient results.
- You need your model to work well in a low-resource language.
- You need the model to be trained on sensitive data that is under strict regulations.
- You have to use a small model due to cost, privacy, infrastructure or other limitations.
In all of the above examples, you will need to make sure that you either already have or can easily obtain a large enough
domain-specific dataset at a reasonable cost to fine-tune a model. You will also need to have enough time and resources
to fine-tune a model.
If the above examples are not the case for you, optimizing prompts can prove to be more beneficial.
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/zero_shot_image_classification.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Zero-shot image classification
[[open-in-colab]]
Zero-shot image classification is a task that involves classifying images into different categories using a model that was
not explicitly trained on data containing labeled examples from those specific categories.
Traditionally, image classification requires training a model on a specific set of labeled images, and this model learns to
"map" certain image features to labels. When there's a need to use such model for a classification task that introduces a
new set of labels, fine-tuning is required to "recalibrate" the model.
In contrast, zero-shot or open vocabulary image classification models are typically multi-modal models that have been trained on a large
dataset of images and associated descriptions. These models learn aligned vision-language representations that can be used for many downstream tasks including zero-shot image classification.
This is a more flexible approach to image classification that allows models to generalize to new and unseen categories
without the need for additional training data and enables users to query images with free-form text descriptions of their target objects .
In this guide you'll learn how to:
* create a zero-shot image classification pipeline
* run zero-shot image classification inference by hand
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install -q transformers
```
## Zero-shot image classification pipeline
The simplest way to try out inference with a model supporting zero-shot image classification is to use the corresponding [`pipeline`].
Instantiate a pipeline from a [checkpoint on the Hugging Face Hub](https://huggingface.co/models?pipeline_tag=zero-shot-image-classification&sort=downloads):
```python
>>> from transformers import pipeline
>>> checkpoint = "openai/clip-vit-large-patch14"
>>> detector = pipeline(model=checkpoint, task="zero-shot-image-classification")
```
Next, choose an image you'd like to classify.
```py
>>> from PIL import Image
>>> import requests
>>> url = "https://unsplash.com/photos/g8oS8-82DxI/download?ixid=MnwxMjA3fDB8MXx0b3BpY3x8SnBnNktpZGwtSGt8fHx8fDJ8fDE2NzgxMDYwODc&force=true&w=640"
>>> image = Image.open(requests.get(url, stream=True).raw)
>>> image
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/owl.jpg" alt="Photo of an owl"/>
</div>
Pass the image and the candidate object labels to the pipeline. Here we pass the image directly; other suitable options
include a local path to an image or an image url.
The candidate labels can be simple words like in this example, or more descriptive.
```py
>>> predictions = detector(image, candidate_labels=["fox", "bear", "seagull", "owl"])
>>> predictions
[{'score': 0.9996670484542847, 'label': 'owl'},
{'score': 0.000199399160919711, 'label': 'seagull'},
{'score': 7.392891711788252e-05, 'label': 'fox'},
{'score': 5.96074532950297e-05, 'label': 'bear'}]
```
## Zero-shot image classification by hand
Now that you've seen how to use the zero-shot image classification pipeline, let's take a look how you can run zero-shot
image classification manually.
Start by loading the model and associated processor from a [checkpoint on the Hugging Face Hub](https://huggingface.co/models?pipeline_tag=zero-shot-image-classification&sort=downloads).
Here we'll use the same checkpoint as before:
```py
>>> from transformers import AutoProcessor, AutoModelForZeroShotImageClassification
>>> model = AutoModelForZeroShotImageClassification.from_pretrained(checkpoint)
>>> processor = AutoProcessor.from_pretrained(checkpoint)
```
Let's take a different image to switch things up.
```py
>>> from PIL import Image
>>> import requests
>>> url = "https://unsplash.com/photos/xBRQfR2bqNI/download?ixid=MnwxMjA3fDB8MXxhbGx8fHx8fHx8fHwxNjc4Mzg4ODEx&force=true&w=640"
>>> image = Image.open(requests.get(url, stream=True).raw)
>>> image
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/car.jpg" alt="Photo of a car"/>
</div>
Use the processor to prepare the inputs for the model. The processor combines an image processor that prepares the
image for the model by resizing and normalizing it, and a tokenizer that takes care of the text inputs.
```py
>>> candidate_labels = ["tree", "car", "bike", "cat"]
>>> inputs = processor(images=image, text=candidate_labels, return_tensors="pt", padding=True)
```
Pass the inputs through the model, and post-process the results:
```py
>>> import torch
>>> with torch.no_grad():
... outputs = model(**inputs)
>>> logits = outputs.logits_per_image[0]
>>> probs = logits.softmax(dim=-1).numpy()
>>> scores = probs.tolist()
>>> result = [
... {"score": score, "label": candidate_label}
... for score, candidate_label in sorted(zip(probs, candidate_labels), key=lambda x: -x[0])
... ]
>>> result
[{'score': 0.998572, 'label': 'car'},
{'score': 0.0010570387, 'label': 'bike'},
{'score': 0.0003393686, 'label': 'tree'},
{'score': 3.1572064e-05, 'label': 'cat'}]
``` | 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/masked_language_modeling.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Masked language modeling
[[open-in-colab]]
<Youtube id="mqElG5QJWUg"/>
Masked language modeling predicts a masked token in a sequence, and the model can attend to tokens bidirectionally. This
means the model has full access to the tokens on the left and right. Masked language modeling is great for tasks that
require a good contextual understanding of an entire sequence. BERT is an example of a masked language model.
This guide will show you how to:
1. Finetune [DistilRoBERTa](https://huggingface.co/distilroberta-base) on the [r/askscience](https://www.reddit.com/r/askscience/) subset of the [ELI5](https://huggingface.co/datasets/eli5) dataset.
2. Use your finetuned model for inference.
<Tip>
You can finetune other architectures for masked language modeling following the same steps in this guide.
Choose one of the following architectures:
<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->
[ALBERT](../model_doc/albert), [BART](../model_doc/bart), [BERT](../model_doc/bert), [BigBird](../model_doc/big_bird), [CamemBERT](../model_doc/camembert), [ConvBERT](../model_doc/convbert), [Data2VecText](../model_doc/data2vec-text), [DeBERTa](../model_doc/deberta), [DeBERTa-v2](../model_doc/deberta-v2), [DistilBERT](../model_doc/distilbert), [ELECTRA](../model_doc/electra), [ERNIE](../model_doc/ernie), [ESM](../model_doc/esm), [FlauBERT](../model_doc/flaubert), [FNet](../model_doc/fnet), [Funnel Transformer](../model_doc/funnel), [I-BERT](../model_doc/ibert), [LayoutLM](../model_doc/layoutlm), [Longformer](../model_doc/longformer), [LUKE](../model_doc/luke), [mBART](../model_doc/mbart), [MEGA](../model_doc/mega), [Megatron-BERT](../model_doc/megatron-bert), [MobileBERT](../model_doc/mobilebert), [MPNet](../model_doc/mpnet), [MRA](../model_doc/mra), [MVP](../model_doc/mvp), [Nezha](../model_doc/nezha), [Nyströmformer](../model_doc/nystromformer), [Perceiver](../model_doc/perceiver), [QDQBert](../model_doc/qdqbert), [Reformer](../model_doc/reformer), [RemBERT](../model_doc/rembert), [RoBERTa](../model_doc/roberta), [RoBERTa-PreLayerNorm](../model_doc/roberta-prelayernorm), [RoCBert](../model_doc/roc_bert), [RoFormer](../model_doc/roformer), [SqueezeBERT](../model_doc/squeezebert), [TAPAS](../model_doc/tapas), [Wav2Vec2](../model_doc/wav2vec2), [XLM](../model_doc/xlm), [XLM-RoBERTa](../model_doc/xlm-roberta), [XLM-RoBERTa-XL](../model_doc/xlm-roberta-xl), [X-MOD](../model_doc/xmod), [YOSO](../model_doc/yoso)
<!--End of the generated tip-->
</Tip>
Before you begin, make sure you have all the necessary libraries installed:
```bash
pip install transformers datasets evaluate
```
We encourage you to log in to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to log in:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
## Load ELI5 dataset
Start by loading a smaller subset of the r/askscience subset of the ELI5 dataset from the 🤗 Datasets library. This'll
give you a chance to experiment and make sure everything works before spending more time training on the full dataset.
```py
>>> from datasets import load_dataset
>>> eli5 = load_dataset("eli5", split="train_asks[:5000]")
```
Split the dataset's `train_asks` split into a train and test set with the [`~datasets.Dataset.train_test_split`] method:
```py
>>> eli5 = eli5.train_test_split(test_size=0.2)
```
Then take a look at an example:
```py
>>> eli5["train"][0]
{'answers': {'a_id': ['c3d1aib', 'c3d4lya'],
'score': [6, 3],
'text': ["The velocity needed to remain in orbit is equal to the square root of Newton's constant times the mass of earth divided by the distance from the center of the earth. I don't know the altitude of that specific mission, but they're usually around 300 km. That means he's going 7-8 km/s.\n\nIn space there are no other forces acting on either the shuttle or the guy, so they stay in the same position relative to each other. If he were to become unable to return to the ship, he would presumably run out of oxygen, or slowly fall into the atmosphere and burn up.",
"Hope you don't mind me asking another question, but why aren't there any stars visible in this photo?"]},
'answers_urls': {'url': []},
'document': '',
'q_id': 'nyxfp',
'selftext': '_URL_0_\n\nThis was on the front page earlier and I have a few questions about it. Is it possible to calculate how fast the astronaut would be orbiting the earth? Also how does he stay close to the shuttle so that he can return safely, i.e is he orbiting at the same speed and can therefore stay next to it? And finally if his propulsion system failed, would he eventually re-enter the atmosphere and presumably die?',
'selftext_urls': {'url': ['http://apod.nasa.gov/apod/image/1201/freeflyer_nasa_3000.jpg']},
'subreddit': 'askscience',
'title': 'Few questions about this space walk photograph.',
'title_urls': {'url': []}}
```
While this may look like a lot, you're only really interested in the `text` field. What's cool about language modeling tasks is you don't need labels (also known as an unsupervised task) because the next word *is* the label.
## Preprocess
<Youtube id="8PmhEIXhBvI"/>
For masked language modeling, the next step is to load a DistilRoBERTa tokenizer to process the `text` subfield:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("distilroberta-base")
```
You'll notice from the example above, the `text` field is actually nested inside `answers`. This means you'll need to e
xtract the `text` subfield from its nested structure with the [`flatten`](https://huggingface.co/docs/datasets/process#flatten) method:
```py
>>> eli5 = eli5.flatten()
>>> eli5["train"][0]
{'answers.a_id': ['c3d1aib', 'c3d4lya'],
'answers.score': [6, 3],
'answers.text': ["The velocity needed to remain in orbit is equal to the square root of Newton's constant times the mass of earth divided by the distance from the center of the earth. I don't know the altitude of that specific mission, but they're usually around 300 km. That means he's going 7-8 km/s.\n\nIn space there are no other forces acting on either the shuttle or the guy, so they stay in the same position relative to each other. If he were to become unable to return to the ship, he would presumably run out of oxygen, or slowly fall into the atmosphere and burn up.",
"Hope you don't mind me asking another question, but why aren't there any stars visible in this photo?"],
'answers_urls.url': [],
'document': '',
'q_id': 'nyxfp',
'selftext': '_URL_0_\n\nThis was on the front page earlier and I have a few questions about it. Is it possible to calculate how fast the astronaut would be orbiting the earth? Also how does he stay close to the shuttle so that he can return safely, i.e is he orbiting at the same speed and can therefore stay next to it? And finally if his propulsion system failed, would he eventually re-enter the atmosphere and presumably die?',
'selftext_urls.url': ['http://apod.nasa.gov/apod/image/1201/freeflyer_nasa_3000.jpg'],
'subreddit': 'askscience',
'title': 'Few questions about this space walk photograph.',
'title_urls.url': []}
```
Each subfield is now a separate column as indicated by the `answers` prefix, and the `text` field is a list now. Instead
of tokenizing each sentence separately, convert the list to a string so you can jointly tokenize them.
Here is a first preprocessing function to join the list of strings for each example and tokenize the result:
```py
>>> def preprocess_function(examples):
... return tokenizer([" ".join(x) for x in examples["answers.text"]])
```
To apply this preprocessing function over the entire dataset, use the 🤗 Datasets [`~datasets.Dataset.map`] method. You can speed up the `map` function by setting `batched=True` to process multiple elements of the dataset at once, and increasing the number of processes with `num_proc`. Remove any columns you don't need:
```py
>>> tokenized_eli5 = eli5.map(
... preprocess_function,
... batched=True,
... num_proc=4,
... remove_columns=eli5["train"].column_names,
... )
```
This dataset contains the token sequences, but some of these are longer than the maximum input length for the model.
You can now use a second preprocessing function to
- concatenate all the sequences
- split the concatenated sequences into shorter chunks defined by `block_size`, which should be both shorter than the maximum input length and short enough for your GPU RAM.
```py
>>> block_size = 128
>>> def group_texts(examples):
... # Concatenate all texts.
... concatenated_examples = {k: sum(examples[k], []) for k in examples.keys()}
... total_length = len(concatenated_examples[list(examples.keys())[0]])
... # We drop the small remainder, we could add padding if the model supported it instead of this drop, you can
... # customize this part to your needs.
... if total_length >= block_size:
... total_length = (total_length // block_size) * block_size
... # Split by chunks of block_size.
... result = {
... k: [t[i : i + block_size] for i in range(0, total_length, block_size)]
... for k, t in concatenated_examples.items()
... }
... return result
```
Apply the `group_texts` function over the entire dataset:
```py
>>> lm_dataset = tokenized_eli5.map(group_texts, batched=True, num_proc=4)
```
Now create a batch of examples using [`DataCollatorForLanguageModeling`]. It's more efficient to *dynamically pad* the sentences to the longest length in a batch during collation, instead of padding the whole dataset to the maximum length.
<frameworkcontent>
<pt>
Use the end-of-sequence token as the padding token and specify `mlm_probability` to randomly mask tokens each time you iterate over the data:
```py
>>> from transformers import DataCollatorForLanguageModeling
>>> tokenizer.pad_token = tokenizer.eos_token
>>> data_collator = DataCollatorForLanguageModeling(tokenizer=tokenizer, mlm_probability=0.15)
```
</pt>
<tf>
Use the end-of-sequence token as the padding token and specify `mlm_probability` to randomly mask tokens each time you iterate over the data:
```py
>>> from transformers import DataCollatorForLanguageModeling
>>> data_collator = DataCollatorForLanguageModeling(tokenizer=tokenizer, mlm_probability=0.15, return_tensors="tf")
```
</tf>
</frameworkcontent>
## Train
<frameworkcontent>
<pt>
<Tip>
If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the basic tutorial [here](../training#train-with-pytorch-trainer)!
</Tip>
You're ready to start training your model now! Load DistilRoBERTa with [`AutoModelForMaskedLM`]:
```py
>>> from transformers import AutoModelForMaskedLM
>>> model = AutoModelForMaskedLM.from_pretrained("distilroberta-base")
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`TrainingArguments`]. The only required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model).
2. Pass the training arguments to [`Trainer`] along with the model, datasets, and data collator.
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> training_args = TrainingArguments(
... output_dir="my_awesome_eli5_mlm_model",
... evaluation_strategy="epoch",
... learning_rate=2e-5,
... num_train_epochs=3,
... weight_decay=0.01,
... push_to_hub=True,
... )
>>> trainer = Trainer(
... model=model,
... args=training_args,
... train_dataset=lm_dataset["train"],
... eval_dataset=lm_dataset["test"],
... data_collator=data_collator,
... )
>>> trainer.train()
```
Once training is completed, use the [`~transformers.Trainer.evaluate`] method to evaluate your model and get its perplexity:
```py
>>> import math
>>> eval_results = trainer.evaluate()
>>> print(f"Perplexity: {math.exp(eval_results['eval_loss']):.2f}")
Perplexity: 8.76
```
Then share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:
```py
>>> trainer.push_to_hub()
```
</pt>
<tf>
<Tip>
If you aren't familiar with finetuning a model with Keras, take a look at the basic tutorial [here](../training#train-a-tensorflow-model-with-keras)!
</Tip>
To finetune a model in TensorFlow, start by setting up an optimizer function, learning rate schedule, and some training hyperparameters:
```py
>>> from transformers import create_optimizer, AdamWeightDecay
>>> optimizer = AdamWeightDecay(learning_rate=2e-5, weight_decay_rate=0.01)
```
Then you can load DistilRoBERTa with [`TFAutoModelForMaskedLM`]:
```py
>>> from transformers import TFAutoModelForMaskedLM
>>> model = TFAutoModelForMaskedLM.from_pretrained("distilroberta-base")
```
Convert your datasets to the `tf.data.Dataset` format with [`~transformers.TFPreTrainedModel.prepare_tf_dataset`]:
```py
>>> tf_train_set = model.prepare_tf_dataset(
... lm_dataset["train"],
... shuffle=True,
... batch_size=16,
... collate_fn=data_collator,
... )
>>> tf_test_set = model.prepare_tf_dataset(
... lm_dataset["test"],
... shuffle=False,
... batch_size=16,
... collate_fn=data_collator,
... )
```
Configure the model for training with [`compile`](https://keras.io/api/models/model_training_apis/#compile-method). Note that Transformers models all have a default task-relevant loss function, so you don't need to specify one unless you want to:
```py
>>> import tensorflow as tf
>>> model.compile(optimizer=optimizer) # No loss argument!
```
This can be done by specifying where to push your model and tokenizer in the [`~transformers.PushToHubCallback`]:
```py
>>> from transformers.keras_callbacks import PushToHubCallback
>>> callback = PushToHubCallback(
... output_dir="my_awesome_eli5_mlm_model",
... tokenizer=tokenizer,
... )
```
Finally, you're ready to start training your model! Call [`fit`](https://keras.io/api/models/model_training_apis/#fit-method) with your training and validation datasets, the number of epochs, and your callback to finetune the model:
```py
>>> model.fit(x=tf_train_set, validation_data=tf_test_set, epochs=3, callbacks=[callback])
```
Once training is completed, your model is automatically uploaded to the Hub so everyone can use it!
</tf>
</frameworkcontent>
<Tip>
For a more in-depth example of how to finetune a model for masked language modeling, take a look at the corresponding
[PyTorch notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling.ipynb)
or [TensorFlow notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/language_modeling-tf.ipynb).
</Tip>
## Inference
Great, now that you've finetuned a model, you can use it for inference!
Come up with some text you'd like the model to fill in the blank with, and use the special `<mask>` token to indicate the blank:
```py
>>> text = "The Milky Way is a <mask> galaxy."
```
The simplest way to try out your finetuned model for inference is to use it in a [`pipeline`]. Instantiate a `pipeline` for fill-mask with your model, and pass your text to it. If you like, you can use the `top_k` parameter to specify how many predictions to return:
```py
>>> from transformers import pipeline
>>> mask_filler = pipeline("fill-mask", "stevhliu/my_awesome_eli5_mlm_model")
>>> mask_filler(text, top_k=3)
[{'score': 0.5150994658470154,
'token': 21300,
'token_str': ' spiral',
'sequence': 'The Milky Way is a spiral galaxy.'},
{'score': 0.07087188959121704,
'token': 2232,
'token_str': ' massive',
'sequence': 'The Milky Way is a massive galaxy.'},
{'score': 0.06434620916843414,
'token': 650,
'token_str': ' small',
'sequence': 'The Milky Way is a small galaxy.'}]
```
<frameworkcontent>
<pt>
Tokenize the text and return the `input_ids` as PyTorch tensors. You'll also need to specify the position of the `<mask>` token:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("stevhliu/my_awesome_eli5_mlm_model")
>>> inputs = tokenizer(text, return_tensors="pt")
>>> mask_token_index = torch.where(inputs["input_ids"] == tokenizer.mask_token_id)[1]
```
Pass your inputs to the model and return the `logits` of the masked token:
```py
>>> from transformers import AutoModelForMaskedLM
>>> model = AutoModelForMaskedLM.from_pretrained("stevhliu/my_awesome_eli5_mlm_model")
>>> logits = model(**inputs).logits
>>> mask_token_logits = logits[0, mask_token_index, :]
```
Then return the three masked tokens with the highest probability and print them out:
```py
>>> top_3_tokens = torch.topk(mask_token_logits, 3, dim=1).indices[0].tolist()
>>> for token in top_3_tokens:
... print(text.replace(tokenizer.mask_token, tokenizer.decode([token])))
The Milky Way is a spiral galaxy.
The Milky Way is a massive galaxy.
The Milky Way is a small galaxy.
```
</pt>
<tf>
Tokenize the text and return the `input_ids` as TensorFlow tensors. You'll also need to specify the position of the `<mask>` token:
```py
>>> from transformers import AutoTokenizer
>>> tokenizer = AutoTokenizer.from_pretrained("stevhliu/my_awesome_eli5_mlm_model")
>>> inputs = tokenizer(text, return_tensors="tf")
>>> mask_token_index = tf.where(inputs["input_ids"] == tokenizer.mask_token_id)[0, 1]
```
Pass your inputs to the model and return the `logits` of the masked token:
```py
>>> from transformers import TFAutoModelForMaskedLM
>>> model = TFAutoModelForMaskedLM.from_pretrained("stevhliu/my_awesome_eli5_mlm_model")
>>> logits = model(**inputs).logits
>>> mask_token_logits = logits[0, mask_token_index, :]
```
Then return the three masked tokens with the highest probability and print them out:
```py
>>> top_3_tokens = tf.math.top_k(mask_token_logits, 3).indices.numpy()
>>> for token in top_3_tokens:
... print(text.replace(tokenizer.mask_token, tokenizer.decode([token])))
The Milky Way is a spiral galaxy.
The Milky Way is a massive galaxy.
The Milky Way is a small galaxy.
```
</tf>
</frameworkcontent>
| 0 |
hf_public_repos/transformers/docs/source/en | hf_public_repos/transformers/docs/source/en/tasks/visual_question_answering.md | <!--Copyright 2023 The HuggingFace Team. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
⚠️ Note that this file is in Markdown but contain specific syntax for our doc-builder (similar to MDX) that may not be
rendered properly in your Markdown viewer.
-->
# Visual Question Answering
[[open-in-colab]]
Visual Question Answering (VQA) is the task of answering open-ended questions based on an image.
The input to models supporting this task is typically a combination of an image and a question, and the output is an
answer expressed in natural language.
Some noteworthy use case examples for VQA include:
* Accessibility applications for visually impaired individuals.
* Education: posing questions about visual materials presented in lectures or textbooks. VQA can also be utilized in interactive museum exhibits or historical sites.
* Customer service and e-commerce: VQA can enhance user experience by letting users ask questions about products.
* Image retrieval: VQA models can be used to retrieve images with specific characteristics. For example, the user can ask "Is there a dog?" to find all images with dogs from a set of images.
In this guide you'll learn how to:
- Fine-tune a classification VQA model, specifically [ViLT](../model_doc/vilt), on the [`Graphcore/vqa` dataset](https://huggingface.co/datasets/Graphcore/vqa).
- Use your fine-tuned ViLT for inference.
- Run zero-shot VQA inference with a generative model, like BLIP-2.
## Fine-tuning ViLT
ViLT model incorporates text embeddings into a Vision Transformer (ViT), allowing it to have a minimal design for
Vision-and-Language Pre-training (VLP). This model can be used for several downstream tasks. For the VQA task, a classifier
head is placed on top (a linear layer on top of the final hidden state of the `[CLS]` token) and randomly initialized.
Visual Question Answering is thus treated as a **classification problem**.
More recent models, such as BLIP, BLIP-2, and InstructBLIP, treat VQA as a generative task. Later in this guide we
illustrate how to use them for zero-shot VQA inference.
Before you begin, make sure you have all the necessary libraries installed.
```bash
pip install -q transformers datasets
```
We encourage you to share your model with the community. Log in to your Hugging Face account to upload it to the 🤗 Hub.
When prompted, enter your token to log in:
```py
>>> from huggingface_hub import notebook_login
>>> notebook_login()
```
Let's define the model checkpoint as a global variable.
```py
>>> model_checkpoint = "dandelin/vilt-b32-mlm"
```
## Load the data
For illustration purposes, in this guide we use a very small sample of the annotated visual question answering `Graphcore/vqa` dataset.
You can find the full dataset on [🤗 Hub](https://huggingface.co/datasets/Graphcore/vqa).
As an alternative to the [`Graphcore/vqa` dataset](https://huggingface.co/datasets/Graphcore/vqa), you can download the
same data manually from the official [VQA dataset page](https://visualqa.org/download.html). If you prefer to follow the
tutorial with your custom data, check out how to [Create an image dataset](https://huggingface.co/docs/datasets/image_dataset#loading-script)
guide in the 🤗 Datasets documentation.
Let's load the first 200 examples from the validation split and explore the dataset's features:
```python
>>> from datasets import load_dataset
>>> dataset = load_dataset("Graphcore/vqa", split="validation[:200]")
>>> dataset
Dataset({
features: ['question', 'question_type', 'question_id', 'image_id', 'answer_type', 'label'],
num_rows: 200
})
```
Let's take a look at an example to understand the dataset's features:
```py
>>> dataset[0]
{'question': 'Where is he looking?',
'question_type': 'none of the above',
'question_id': 262148000,
'image_id': '/root/.cache/huggingface/datasets/downloads/extracted/ca733e0e000fb2d7a09fbcc94dbfe7b5a30750681d0e965f8e0a23b1c2f98c75/val2014/COCO_val2014_000000262148.jpg',
'answer_type': 'other',
'label': {'ids': ['at table', 'down', 'skateboard', 'table'],
'weights': [0.30000001192092896,
1.0,
0.30000001192092896,
0.30000001192092896]}}
```
The features relevant to the task include:
* `question`: the question to be answered from the image
* `image_id`: the path to the image the question refers to
* `label`: the annotations
We can remove the rest of the features as they won't be necessary:
```py
>>> dataset = dataset.remove_columns(['question_type', 'question_id', 'answer_type'])
```
As you can see, the `label` feature contains several answers to the same question (called `ids` here) collected by different human annotators.
This is because the answer to a question can be subjective. In this case, the question is "where is he looking?". Some people
annotated this with "down", others with "at table", another one with "skateboard", etc.
Take a look at the image and consider which answer would you give:
```python
>>> from PIL import Image
>>> image = Image.open(dataset[0]['image_id'])
>>> image
```
<div class="flex justify-center">
<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/transformers/tasks/vqa-example.png" alt="VQA Image Example"/>
</div>
Due to the questions' and answers' ambiguity, datasets like this are treated as a multi-label classification problem (as
multiple answers are possibly valid). Moreover, rather than just creating a one-hot encoded vector, one creates a
soft encoding, based on the number of times a certain answer appeared in the annotations.
For instance, in the example above, because the answer "down" is selected way more often than other answers, it has a
score (called `weight` in the dataset) of 1.0, and the rest of the answers have scores < 1.0.
To later instantiate the model with an appropriate classification head, let's create two dictionaries: one that maps
the label name to an integer and vice versa:
```py
>>> import itertools
>>> labels = [item['ids'] for item in dataset['label']]
>>> flattened_labels = list(itertools.chain(*labels))
>>> unique_labels = list(set(flattened_labels))
>>> label2id = {label: idx for idx, label in enumerate(unique_labels)}
>>> id2label = {idx: label for label, idx in label2id.items()}
```
Now that we have the mappings, we can replace the string answers with their ids, and flatten the dataset for a more convenient further preprocessing.
```python
>>> def replace_ids(inputs):
... inputs["label"]["ids"] = [label2id[x] for x in inputs["label"]["ids"]]
... return inputs
>>> dataset = dataset.map(replace_ids)
>>> flat_dataset = dataset.flatten()
>>> flat_dataset.features
{'question': Value(dtype='string', id=None),
'image_id': Value(dtype='string', id=None),
'label.ids': Sequence(feature=Value(dtype='int64', id=None), length=-1, id=None),
'label.weights': Sequence(feature=Value(dtype='float64', id=None), length=-1, id=None)}
```
## Preprocessing data
The next step is to load a ViLT processor to prepare the image and text data for the model.
[`ViltProcessor`] wraps a BERT tokenizer and ViLT image processor into a convenient single processor:
```py
>>> from transformers import ViltProcessor
>>> processor = ViltProcessor.from_pretrained(model_checkpoint)
```
To preprocess the data we need to encode the images and questions using the [`ViltProcessor`]. The processor will use
the [`BertTokenizerFast`] to tokenize the text and create `input_ids`, `attention_mask` and `token_type_ids` for the text data.
As for images, the processor will leverage [`ViltImageProcessor`] to resize and normalize the image, and create `pixel_values` and `pixel_mask`.
All these preprocessing steps are done under the hood, we only need to call the `processor`. However, we still need to
prepare the target labels. In this representation, each element corresponds to a possible answer (label). For correct answers, the element holds
their respective score (weight), while the remaining elements are set to zero.
The following function applies the `processor` to the images and questions and formats the labels as described above:
```py
>>> import torch
>>> def preprocess_data(examples):
... image_paths = examples['image_id']
... images = [Image.open(image_path) for image_path in image_paths]
... texts = examples['question']
... encoding = processor(images, texts, padding="max_length", truncation=True, return_tensors="pt")
... for k, v in encoding.items():
... encoding[k] = v.squeeze()
... targets = []
... for labels, scores in zip(examples['label.ids'], examples['label.weights']):
... target = torch.zeros(len(id2label))
... for label, score in zip(labels, scores):
... target[label] = score
... targets.append(target)
... encoding["labels"] = targets
... return encoding
```
To apply the preprocessing function over the entire dataset, use 🤗 Datasets [`~datasets.map`] function. You can speed up `map` by
setting `batched=True` to process multiple elements of the dataset at once. At this point, feel free to remove the columns you don't need.
```py
>>> processed_dataset = flat_dataset.map(preprocess_data, batched=True, remove_columns=['question','question_type', 'question_id', 'image_id', 'answer_type', 'label.ids', 'label.weights'])
>>> processed_dataset
Dataset({
features: ['input_ids', 'token_type_ids', 'attention_mask', 'pixel_values', 'pixel_mask', 'labels'],
num_rows: 200
})
```
As a final step, create a batch of examples using [`DefaultDataCollator`]:
```py
>>> from transformers import DefaultDataCollator
>>> data_collator = DefaultDataCollator()
```
## Train the model
You’re ready to start training your model now! Load ViLT with [`ViltForQuestionAnswering`]. Specify the number of labels
along with the label mappings:
```py
>>> from transformers import ViltForQuestionAnswering
>>> model = ViltForQuestionAnswering.from_pretrained(model_checkpoint, num_labels=len(id2label), id2label=id2label, label2id=label2id)
```
At this point, only three steps remain:
1. Define your training hyperparameters in [`TrainingArguments`]:
```py
>>> from transformers import TrainingArguments
>>> repo_id = "MariaK/vilt_finetuned_200"
>>> training_args = TrainingArguments(
... output_dir=repo_id,
... per_device_train_batch_size=4,
... num_train_epochs=20,
... save_steps=200,
... logging_steps=50,
... learning_rate=5e-5,
... save_total_limit=2,
... remove_unused_columns=False,
... push_to_hub=True,
... )
```
2. Pass the training arguments to [`Trainer`] along with the model, dataset, processor, and data collator.
```py
>>> from transformers import Trainer
>>> trainer = Trainer(
... model=model,
... args=training_args,
... data_collator=data_collator,
... train_dataset=processed_dataset,
... tokenizer=processor,
... )
```
3. Call [`~Trainer.train`] to finetune your model.
```py
>>> trainer.train()
```
Once training is completed, share your model to the Hub with the [`~Trainer.push_to_hub`] method to share your final model on the 🤗 Hub:
```py
>>> trainer.push_to_hub()
```
## Inference
Now that you have fine-tuned a ViLT model, and uploaded it to the 🤗 Hub, you can use it for inference. The simplest
way to try out your fine-tuned model for inference is to use it in a [`Pipeline`].
```py
>>> from transformers import pipeline
>>> pipe = pipeline("visual-question-answering", model="MariaK/vilt_finetuned_200")
```
The model in this guide has only been trained on 200 examples, so don't expect a lot from it. Let's see if it at least
learned something from the data and take the first example from the dataset to illustrate inference:
```py
>>> example = dataset[0]
>>> image = Image.open(example['image_id'])
>>> question = example['question']
>>> print(question)
>>> pipe(image, question, top_k=1)
"Where is he looking?"
[{'score': 0.5498199462890625, 'answer': 'down'}]
```
Even though not very confident, the model indeed has learned something. With more examples and longer training, you'll get far better results!
You can also manually replicate the results of the pipeline if you'd like:
1. Take an image and a question, prepare them for the model using the processor from your model.
2. Forward the result or preprocessing through the model.
3. From the logits, get the most likely answer's id, and find the actual answer in the `id2label`.
```py
>>> processor = ViltProcessor.from_pretrained("MariaK/vilt_finetuned_200")
>>> image = Image.open(example['image_id'])
>>> question = example['question']
>>> # prepare inputs
>>> inputs = processor(image, question, return_tensors="pt")
>>> model = ViltForQuestionAnswering.from_pretrained("MariaK/vilt_finetuned_200")
>>> # forward pass
>>> with torch.no_grad():
... outputs = model(**inputs)
>>> logits = outputs.logits
>>> idx = logits.argmax(-1).item()
>>> print("Predicted answer:", model.config.id2label[idx])
Predicted answer: down
```
## Zero-shot VQA
The previous model treated VQA as a classification task. Some recent models, such as BLIP, BLIP-2, and InstructBLIP approach
VQA as a generative task. Let's take [BLIP-2](../model_doc/blip-2) as an example. It introduced a new visual-language pre-training
paradigm in which any combination of pre-trained vision encoder and LLM can be used (learn more in the [BLIP-2 blog post](https://huggingface.co/blog/blip-2)).
This enables achieving state-of-the-art results on multiple visual-language tasks including visual question answering.
Let's illustrate how you can use this model for VQA. First, let's load the model. Here we'll explicitly send the model to a
GPU, if available, which we didn't need to do earlier when training, as [`Trainer`] handles this automatically:
```py
>>> from transformers import AutoProcessor, Blip2ForConditionalGeneration
>>> import torch
>>> processor = AutoProcessor.from_pretrained("Salesforce/blip2-opt-2.7b")
>>> model = Blip2ForConditionalGeneration.from_pretrained("Salesforce/blip2-opt-2.7b", torch_dtype=torch.float16)
>>> device = "cuda" if torch.cuda.is_available() else "cpu"
>>> model.to(device)
```
The model takes image and text as input, so let's use the exact same image/question pair from the first example in the VQA dataset:
```py
>>> example = dataset[0]
>>> image = Image.open(example['image_id'])
>>> question = example['question']
```
To use BLIP-2 for visual question answering task, the textual prompt has to follow a specific format: `Question: {} Answer:`.
```py
>>> prompt = f"Question: {question} Answer:"
```
Now we need to preprocess the image/prompt with the model's processor, pass the processed input through the model, and decode the output:
```py
>>> inputs = processor(image, text=prompt, return_tensors="pt").to(device, torch.float16)
>>> generated_ids = model.generate(**inputs, max_new_tokens=10)
>>> generated_text = processor.batch_decode(generated_ids, skip_special_tokens=True)[0].strip()
>>> print(generated_text)
"He is looking at the crowd"
```
As you can see, the model recognized the crowd, and the direction of the face (looking down), however, it seems to miss
the fact the crowd is behind the skater. Still, in cases where acquiring human-annotated datasets is not feasible, this
approach can quickly produce useful results.
| 0 |
hf_public_repos/transformers/docker | hf_public_repos/transformers/docker/transformers-past-gpu/Dockerfile | ARG BASE_DOCKER_IMAGE
FROM $BASE_DOCKER_IMAGE
LABEL maintainer="Hugging Face"
ARG DEBIAN_FRONTEND=noninteractive
# Use login shell to read variables from `~/.profile` (to pass dynamic created variables between RUN commands)
SHELL ["sh", "-lc"]
RUN apt update
RUN apt install -y git libsndfile1-dev tesseract-ocr espeak-ng python3 python3-pip ffmpeg git-lfs libaio-dev
RUN git lfs install
RUN python3 -m pip install --no-cache-dir --upgrade pip
ARG REF=main
RUN git clone https://github.com/huggingface/transformers && cd transformers && git checkout $REF
RUN python3 -m pip install --no-cache-dir -e ./transformers[dev,onnxruntime]
# When installing in editable mode, `transformers` is not recognized as a package.
# this line must be added in order for python to be aware of transformers.
RUN cd transformers && python3 setup.py develop
ARG FRAMEWORK
ARG VERSION
# Control `setuptools` version to avoid some issues
RUN [ "$VERSION" != "1.10" ] && python3 -m pip install -U setuptools || python3 -m pip install -U "setuptools<=59.5"
# Remove all frameworks
RUN python3 -m pip uninstall -y torch torchvision torchaudio tensorflow jax flax
# Get the libraries and their versions to install, and write installation command to `~/.profile`.
RUN python3 ./transformers/utils/past_ci_versions.py --framework $FRAMEWORK --version $VERSION
# Install the target framework
RUN echo "INSTALL_CMD = $INSTALL_CMD"
RUN $INSTALL_CMD
RUN [ "$FRAMEWORK" != "pytorch" ] && echo "`deepspeed-testing` installation is skipped" || python3 -m pip install --no-cache-dir ./transformers[deepspeed-testing]
# Remove `accelerate`: it requires `torch`, and this causes import issues for TF-only testing
# We will install `accelerate@main` in Past CI workflow file
RUN python3 -m pip uninstall -y accelerate
# Uninstall `torch-tensorrt` and `apex` shipped with the base image
RUN python3 -m pip uninstall -y torch-tensorrt apex
# Pre-build **nightly** release of DeepSpeed, so it would be ready for testing (otherwise, the 1st deepspeed test will timeout)
RUN python3 -m pip uninstall -y deepspeed
# This has to be run inside the GPU VMs running the tests. (So far, it fails here due to GPU checks during compilation.)
# Issue: https://github.com/microsoft/DeepSpeed/issues/2010
# RUN git clone https://github.com/microsoft/DeepSpeed && cd DeepSpeed && rm -rf build && \
# DS_BUILD_CPU_ADAM=1 DS_BUILD_FUSED_ADAM=1 DS_BUILD_UTILS=1 python3 -m pip install . --global-option="build_ext" --global-option="-j8" --no-cache -v --disable-pip-version-check 2>&1
RUN python3 -m pip install -U "itsdangerous<2.1.0"
# When installing in editable mode, `transformers` is not recognized as a package.
# this line must be added in order for python to be aware of transformers.
RUN cd transformers && python3 setup.py develop
| 0 |
hf_public_repos/transformers/docker | hf_public_repos/transformers/docker/transformers-pytorch-tpu/dataset.yaml | apiVersion: v1
kind: PersistentVolume
metadata:
name: huggingface-cluster-disk
spec:
storageClassName: ""
capacity:
storage: 500Gi
accessModes:
- ReadOnlyMany
claimRef:
namespace: default
name: huggingface-cluster-disk-claim
gcePersistentDisk:
pdName: huggingface-cluster-disk
fsType: ext4
readOnly: true
---
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
name: huggingface-cluster-disk-claim
spec:
# Specify "" as the storageClassName so it matches the PersistentVolume's StorageClass.
# A nil storageClassName value uses the default StorageClass. For details, see
# https://kubernetes.io/docs/concepts/storage/persistent-volumes/#class-1
storageClassName: ""
accessModes:
- ReadOnlyMany
resources:
requests:
storage: 1Ki
| 0 |
hf_public_repos/transformers/docker | hf_public_repos/transformers/docker/transformers-pytorch-tpu/Dockerfile | FROM google/cloud-sdk:slim
# Build args.
ARG GITHUB_REF=refs/heads/main
# TODO: This Dockerfile installs pytorch/xla 3.6 wheels. There are also 3.7
# wheels available; see below.
ENV PYTHON_VERSION=3.6
RUN apt-get update && apt-get install -y --no-install-recommends \
build-essential \
cmake \
git \
curl \
ca-certificates
# Install conda and python.
# NOTE new Conda does not forward the exit status... https://github.com/conda/conda/issues/8385
RUN curl -o ~/miniconda.sh https://repo.anaconda.com/miniconda/Miniconda3-4.7.12-Linux-x86_64.sh && \
chmod +x ~/miniconda.sh && \
~/miniconda.sh -b && \
rm ~/miniconda.sh
ENV PATH=/root/miniconda3/bin:$PATH
RUN conda create -y --name container python=$PYTHON_VERSION
# Run the rest of commands within the new conda env.
# Use absolute path to appease Codefactor.
SHELL ["/root/miniconda3/bin/conda", "run", "-n", "container", "/bin/bash", "-c"]
RUN conda install -y python=$PYTHON_VERSION mkl
RUN pip uninstall -y torch && \
# Python 3.7 wheels are available. Replace cp36-cp36m with cp37-cp37m
gsutil cp 'gs://tpu-pytorch/wheels/torch-nightly-cp${PYTHON_VERSION/./}-cp${PYTHON_VERSION/./}m-linux_x86_64.whl' . && \
gsutil cp 'gs://tpu-pytorch/wheels/torch_xla-nightly-cp${PYTHON_VERSION/./}-cp${PYTHON_VERSION/./}m-linux_x86_64.whl' . && \
gsutil cp 'gs://tpu-pytorch/wheels/torchvision-nightly-cp${PYTHON_VERSION/./}-cp${PYTHON_VERSION/./}m-linux_x86_64.whl' . && \
pip install 'torch-nightly-cp${PYTHON_VERSION/./}-cp${PYTHON_VERSION/./}m-linux_x86_64.whl' && \
pip install 'torch_xla-nightly-cp${PYTHON_VERSION/./}-cp${PYTHON_VERSION/./}m-linux_x86_64.whl' && \
pip install 'torchvision-nightly-cp${PYTHON_VERSION/./}-cp${PYTHON_VERSION/./}m-linux_x86_64.whl' && \
rm 'torch-nightly-cp${PYTHON_VERSION/./}-cp${PYTHON_VERSION/./}m-linux_x86_64.whl' && \
rm 'torch_xla-nightly-cp${PYTHON_VERSION/./}-cp${PYTHON_VERSION/./}m-linux_x86_64.whl' && \
rm 'torchvision-nightly-cp${PYTHON_VERSION/./}-cp${PYTHON_VERSION/./}m-linux_x86_64.whl' && \
apt-get install -y libomp5
ENV LD_LIBRARY_PATH=root/miniconda3/envs/container/lib
# Install huggingface/transformers at the current PR, plus dependencies.
RUN git clone https://github.com/huggingface/transformers.git && \
cd transformers && \
git fetch origin $GITHUB_REF:CI && \
git checkout CI && \
cd .. && \
pip install ./transformers && \
pip install -r ./transformers/examples/pytorch/_test_requirements.txt && \
pip install pytest
RUN python -c "import torch_xla; print(torch_xla.__version__)"
RUN python -c "import transformers as trf; print(trf.__version__)"
RUN conda init bash
COPY docker-entrypoint.sh /usr/local/bin/
RUN chmod +x /usr/local/bin/docker-entrypoint.sh
ENTRYPOINT ["/usr/local/bin/docker-entrypoint.sh"]
CMD ["bash"]
| 0 |
hf_public_repos/transformers/docker | hf_public_repos/transformers/docker/transformers-pytorch-tpu/docker-entrypoint.sh | #!/bin/bash
source ~/.bashrc
echo "running docker-entrypoint.sh"
conda activate container
echo $KUBE_GOOGLE_CLOUD_TPU_ENDPOINTS
echo "printed TPU info"
export XRT_TPU_CONFIG="tpu_worker;0;${KUBE_GOOGLE_CLOUD_TPU_ENDPOINTS:7}"
exec "$@"#!/bin/bash
| 0 |
hf_public_repos/transformers/docker | hf_public_repos/transformers/docker/transformers-pytorch-tpu/bert-base-cased.jsonnet | local base = import 'templates/base.libsonnet';
local tpus = import 'templates/tpus.libsonnet';
local utils = import "templates/utils.libsonnet";
local volumes = import "templates/volumes.libsonnet";
local bertBaseCased = base.BaseTest {
frameworkPrefix: "hf",
modelName: "bert-base-cased",
mode: "example",
configMaps: [],
timeout: 3600, # 1 hour, in seconds
image: std.extVar('image'),
imageTag: std.extVar('image-tag'),
tpuSettings+: {
softwareVersion: "pytorch-nightly",
},
accelerator: tpus.v3_8,
volumeMap+: {
datasets: volumes.PersistentVolumeSpec {
name: "huggingface-cluster-disk",
mountPath: "/datasets",
},
},
command: utils.scriptCommand(
|||
python -m pytest -s transformers/examples/pytorch/test_xla_examples.py -v
test_exit_code=$?
echo "\nFinished running commands.\n"
test $test_exit_code -eq 0
|||
),
};
bertBaseCased.oneshotJob
| 0 |
hf_public_repos/transformers/docker | hf_public_repos/transformers/docker/transformers-doc-builder/Dockerfile | FROM python:3.10
LABEL maintainer="Hugging Face"
RUN apt update
RUN git clone https://github.com/huggingface/transformers
RUN python3 -m pip install --no-cache-dir --upgrade pip && python3 -m pip install --no-cache-dir git+https://github.com/huggingface/doc-builder ./transformers[dev]
RUN apt-get -y update && apt-get install -y libsndfile1-dev && apt install -y tesseract-ocr
# Torch needs to be installed before deepspeed
RUN python3 -m pip install --no-cache-dir ./transformers[deepspeed]
RUN python3 -m pip install --no-cache-dir torchvision git+https://github.com/facebookresearch/detectron2.git pytesseract
RUN python3 -m pip install -U "itsdangerous<2.1.0"
# Test if the image could successfully build the doc. before publishing the image
RUN doc-builder build transformers transformers/docs/source/en --build_dir doc-build-dev --notebook_dir notebooks/transformers_doc --clean
RUN rm -rf doc-build-dev | 0 |
hf_public_repos/transformers/docker | hf_public_repos/transformers/docker/transformers-pytorch-deepspeed-latest-gpu/Dockerfile | # https://docs.nvidia.com/deeplearning/frameworks/pytorch-release-notes/rel-23-11.html#rel-23-11
FROM nvcr.io/nvidia/pytorch:23.11-py3
LABEL maintainer="Hugging Face"
ARG DEBIAN_FRONTEND=noninteractive
ARG PYTORCH='2.1.0'
# Example: `cu102`, `cu113`, etc.
ARG CUDA='cu121'
RUN apt -y update
RUN apt install -y libaio-dev
RUN python3 -m pip install --no-cache-dir --upgrade pip
ARG REF=main
RUN git clone https://github.com/huggingface/transformers && cd transformers && git checkout $REF
RUN python3 -m pip uninstall -y torch torchvision torchaudio
# Install latest release PyTorch
# (PyTorch must be installed before pre-compiling any DeepSpeed c++/cuda ops.)
# (https://www.deepspeed.ai/tutorials/advanced-install/#pre-install-deepspeed-ops)
RUN python3 -m pip install --no-cache-dir -U torch==$PYTORCH torchvision torchaudio --extra-index-url https://download.pytorch.org/whl/$CUDA
RUN python3 -m pip install --no-cache-dir ./transformers[deepspeed-testing]
RUN python3 -m pip install --no-cache-dir git+https://github.com/huggingface/accelerate@main#egg=accelerate
# Uninstall `transformer-engine` shipped with the base image
RUN python3 -m pip uninstall -y transformer-engine
# Uninstall `torch-tensorrt` shipped with the base image
RUN python3 -m pip uninstall -y torch-tensorrt
# recompile apex
RUN python3 -m pip uninstall -y apex
# RUN git clone https://github.com/NVIDIA/apex
# `MAX_JOBS=1` disables parallel building to avoid cpu memory OOM when building image on GitHub Action (standard) runners
# TODO: check if there is alternative way to install latest apex
# RUN cd apex && MAX_JOBS=1 python3 -m pip install --global-option="--cpp_ext" --global-option="--cuda_ext" --no-cache -v --disable-pip-version-check .
# Pre-build **latest** DeepSpeed, so it would be ready for testing (otherwise, the 1st deepspeed test will timeout)
RUN python3 -m pip uninstall -y deepspeed
# This has to be run (again) inside the GPU VMs running the tests.
# The installation works here, but some tests fail, if we don't pre-build deepspeed again in the VMs running the tests.
# TODO: Find out why test fail.
RUN DS_BUILD_CPU_ADAM=1 DS_BUILD_FUSED_ADAM=1 python3 -m pip install deepspeed --global-option="build_ext" --global-option="-j8" --no-cache -v --disable-pip-version-check 2>&1
# When installing in editable mode, `transformers` is not recognized as a package.
# this line must be added in order for python to be aware of transformers.
RUN cd transformers && python3 setup.py develop
# The base image ships with `pydantic==1.8.2` which is not working - i.e. the next command fails
RUN python3 -m pip install -U --no-cache-dir "pydantic<2"
RUN python3 -c "from deepspeed.launcher.runner import main"
| 0 |
hf_public_repos/transformers/docker | hf_public_repos/transformers/docker/transformers-pytorch-deepspeed-nightly-gpu/Dockerfile | # https://docs.nvidia.com/deeplearning/frameworks/pytorch-release-notes/rel-23-11.html#rel-23-11
FROM nvcr.io/nvidia/pytorch:23.11-py3
LABEL maintainer="Hugging Face"
ARG DEBIAN_FRONTEND=noninteractive
# Example: `cu102`, `cu113`, etc.
ARG CUDA='cu121'
RUN apt -y update
RUN apt install -y libaio-dev
RUN python3 -m pip install --no-cache-dir --upgrade pip
ARG REF=main
RUN git clone https://github.com/huggingface/transformers && cd transformers && git checkout $REF
RUN python3 -m pip uninstall -y torch torchvision torchaudio
# Install **nightly** release PyTorch (flag `--pre`)
# (PyTorch must be installed before pre-compiling any DeepSpeed c++/cuda ops.)
# (https://www.deepspeed.ai/tutorials/advanced-install/#pre-install-deepspeed-ops)
RUN python3 -m pip install --no-cache-dir -U --pre torch torchvision torchaudio --extra-index-url https://download.pytorch.org/whl/nightly/$CUDA
RUN python3 -m pip install --no-cache-dir ./transformers[deepspeed-testing]
RUN python3 -m pip install --no-cache-dir git+https://github.com/huggingface/accelerate@main#egg=accelerate
# Uninstall `transformer-engine` shipped with the base image
RUN python3 -m pip uninstall -y transformer-engine
# Uninstall `torch-tensorrt` and `apex` shipped with the base image
RUN python3 -m pip uninstall -y torch-tensorrt apex
# Pre-build **nightly** release of DeepSpeed, so it would be ready for testing (otherwise, the 1st deepspeed test will timeout)
RUN python3 -m pip uninstall -y deepspeed
# This has to be run inside the GPU VMs running the tests. (So far, it fails here due to GPU checks during compilation.)
# Issue: https://github.com/microsoft/DeepSpeed/issues/2010
# RUN git clone https://github.com/microsoft/DeepSpeed && cd DeepSpeed && rm -rf build && \
# DS_BUILD_CPU_ADAM=1 DS_BUILD_FUSED_ADAM=1 DS_BUILD_UTILS=1 python3 -m pip install . --global-option="build_ext" --global-option="-j8" --no-cache -v --disable-pip-version-check 2>&1
## For `torchdynamo` tests
## (see https://github.com/huggingface/transformers/pull/17765)
#RUN git clone https://github.com/pytorch/functorch
#RUN python3 -m pip install --no-cache-dir ./functorch[aot]
#RUN cd functorch && python3 setup.py develop
#
#RUN git clone https://github.com/pytorch/torchdynamo
#RUN python3 -m pip install -r ./torchdynamo/requirements.txt
#RUN cd torchdynamo && python3 setup.py develop
#
## install TensorRT
#RUN python3 -m pip install --no-cache-dir -U nvidia-pyindex
#RUN python3 -m pip install --no-cache-dir -U nvidia-tensorrt==8.2.4.2
#
## install torch_tensorrt (fx path)
#RUN git clone https://github.com/pytorch/TensorRT.git
#RUN cd TensorRT/py && python3 setup.py install --fx-only
# When installing in editable mode, `transformers` is not recognized as a package.
# this line must be added in order for python to be aware of transformers.
RUN cd transformers && python3 setup.py develop
# Disable for now as deepspeed is not installed above. To be enabled once the issue is fixed.
# RUN python3 -c "from deepspeed.launcher.runner import main"
| 0 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.