id
stringlengths 9
16
| submitter
stringlengths 1
64
⌀ | authors
stringlengths 3
62.8k
| title
stringlengths 1
382
| comments
stringlengths 1
1.15k
⌀ | journal-ref
stringlengths 1
557
⌀ | doi
stringlengths 7
153
⌀ | report-no
stringlengths 1
509
⌀ | categories
stringlengths 5
125
| license
stringclasses 9
values | abstract
stringlengths 6
6.09k
| versions
listlengths 1
187
| update_date
timestamp[s]date 2007-05-23 00:00:00
2025-04-25 00:00:00
| authors_parsed
sequencelengths 1
2.83k
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
physics/0007077 | Rohini M. Godbole | R.M. Godbole (Center for Theoretical Studies, Indian Institute of
Science) | The Nobel Prize in Physics 1999 | 5 pages, LateX, no inline figures. Six 'boxes' included separately as
six jpg files. These jpg files as well as 10 separate pdf files (one for each
printed page) can be accessed from
http://144.16.74.196/~www/resonance/npp99res.htm. added journal ref | Resonance, Journal of Science Education, 5(2) (2000) 16-25 | null | null | physics.ed-ph hep-ph | null | The last Nobel Prize of the Millenium in Physics has been awarded jointly to
Professor Gerardus 't Hooft of the University of Utrecht in Holland and his
thesis advisor Professor Emeritus Martinus J.G. Veltman of Holland. According
to the Academy's citation, the Nobel Prize has been awarded for 'elucidating
the quantum structure of electroweak interaction in Physics'. It further goes
on to say that they have placed particle physics theory on a firmer
mathematical foundation. In this short note, we will try to understand both
these aspects of the award. The work for which they have been awarded the Nobel
Prize was done in 1971. However, the precise predictions of properties of
particles that were made possible as a result of their work, were tested to a
very high degree of accuracy only in this last decade. This was done in a
series of measurements in the experiments in the accelerator laboratories at
CERN (Geneva) and Fermilab. To understand the full significance of this Nobel
Prize, we will have to summarise briefly the developement of our current
theoretical framework about the basic constituents of matter and the forces
which hold them together. In fact the path can be partially traced in a chain
of Nobel prizes starting from one in 1965 to S. Tomonaga, J. Schwinger and R.
Feynman, to the one to S.L. Glashow, A. Salam and S. Weinberg in 1979, and then
to C. Rubia and Simon van der Meer in 1984 ending with the current one.
| [
{
"version": "v1",
"created": "Tue, 25 Jul 2000 12:14:01 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Godbole",
"R. M.",
"",
"Center for Theoretical Studies, Indian Institute of\n Science"
]
] |
physics/0007080 | Carsten P. Welsch | C.P. Welsch, K.U. Kuehnel and A. Schempp | Development of rebunching cavities at IAP | 3 pages, 9 figures, paper for LINAC 2000 conference | eConf C000821 (2000) THD14 | null | null | physics.acc-ph | null | A focus of work at IAP has been the development and optimization of spiral
loaded cavities since the 1970s [A. Schempp et al, NIM 135, 409 (1976)]. These
cavities feature a high efficiency, a compact design and a big variety of
possible fields of application. They find use both as bunchers and post
accelerators to vary the final energy of the beam. In comparison to other
available designs, the advantage of these structures lies in their small size.
Furthermore they can easily be tuned to the required resonance frequency by
varying the length of the spiral. Due to the small size of the cavities the
required budget can also be kept low. Here, two slightly different types of
spiral loaded cavities, which were built for the REX-ISOLDE project at CERN and
the intensity upgrade program at GSI are being discussed.
| [
{
"version": "v1",
"created": "Wed, 26 Jul 2000 10:57:49 GMT"
},
{
"version": "v2",
"created": "Thu, 17 Aug 2000 10:24:39 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Welsch",
"C. P.",
""
],
[
"Kuehnel",
"K. U.",
""
],
[
"Schempp",
"A.",
""
]
] |
physics/0007081 | Franco | M.Castellano, M. Ferrario, F.Tazzioli, L.Catani, L.Giannessi,
I.Boscolo, S. Cialdi, M. Valentini | Measurement of the temporal response of ferroelectric cathodes | 3 pages, 6 figures | eConf C000821 (2000) MOc10 | null | LINAC2000-MOC10 | physics.acc-ph | null | Ferroelectric ceramics are tested as photocathodes at INFN Frascati
Laboratories. In order to characterize them for use in linac injectors it is
important to measure the temporal shape of the emitted current. With a duration
of the laser pulse of 25 ps, the required resolution is a few ps. An apparatus
has been set up for the purpose, consisting of a 30 kV electron gun, a
microwave deflecting cavity which translates the temporal distribution of the
electron bunch into a spatial one, a fluorescent screen on which the deflected
beam traces a sector of a circle and various focusing and charge measuring
items. The image on the screen is detected via a CCD camera and a frame
grabber. We describe the performance of the apparatus and some preliminary
temporal distribution measurements.
| [
{
"version": "v1",
"created": "Wed, 26 Jul 2000 11:58:39 GMT"
},
{
"version": "v2",
"created": "Mon, 21 Aug 2000 21:09:22 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Castellano",
"M.",
""
],
[
"Ferrario",
"M.",
""
],
[
"Tazzioli",
"F.",
""
],
[
"Catani",
"L.",
""
],
[
"Giannessi",
"L.",
""
],
[
"Boscolo",
"I.",
""
],
[
"Cialdi",
"S.",
""
],
[
"Valentini",
"M.",
""
]
] |
physics/0007084 | Alexandre C. Tort | C. Farina, F.C. Santos and A.C. Tort | A Simple Model for the Non-Retarded Dispersive Force between an
Electrically Polarizable Atom and a Magnetic Polarizable One | 6 pages, no figures, standard LaTex document | null | null | null | physics.atom-ph | null | It is well known that for the case of two neutral but electrically
polarizable atoms the consideration or not of retardation effects on the
dispersive van der Waals force between them leads essentially to different
power laws for the forces; while the retarded force is proportional to $1/r^8$,
where $r$ is the distance between the atoms, the non-retarded force is
proportional to $1/r^7$. Here we consider the (repulsive) dispersive force
between an electrically polarizable atom and a magnetically polarizable one and
show that, in contrast to the previous case, a quite unexpected result appears,
namely: while the retarded force is still proportional to $1/r^8$, the
non-retarded force is proportional to $1/r^5$. We employ a semiclassical method
based on the fluctuating dipole model for both atoms.
| [
{
"version": "v1",
"created": "Thu, 27 Jul 2000 20:50:55 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Farina",
"C.",
""
],
[
"Santos",
"F. C.",
""
],
[
"Tort",
"A. C.",
""
]
] |
physics/0007085 | David F. Phillips | R.E. Stoner and R.L. Walsworth | Measurement of the 21Ne Zeeman frequency shift due to Rb-21Ne collisions | 10 pages, 5 figures. Submitted to Physical Review A (2000) | null | null | null | physics.atom-ph | null | We compared the frequency shift of the 21Ne Zeeman resonance induced by
polarized Rb vapor to the shift induced in the 3He Zeeman resonance. The 3He/Rb
shift has recently been measured with high precision, permitting the conversion
of our differential measurement to an absolute value for the 21Ne/Rb shift. We
report a value of K = 31.8 +/- 2.8 for the Rb/21Ne enhancement factor at a
temperature of 124.8 +/- 1.9 C. We propose high-precision differential contact
shift measurements, the absolute accuracy of which would be limited by the
error in the 3He contact shift.
| [
{
"version": "v1",
"created": "Thu, 27 Jul 2000 17:37:41 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Stoner",
"R. E.",
""
],
[
"Walsworth",
"R. L.",
""
]
] |
physics/0007088 | Carsten P. Welsch | C.P. Welsch, K.-U. Kuehnel and A. Schempp | Development of Rebunching Cavities at IAP | 4 pages, 9 figures PRST-AB special LINAC 2000 edition with additional
information in comparison to the 3 pages LINAC paper physics/0007080 | null | null | Int-Rep IAP01 | physics.acc-ph | null | A focus of work at IAP has been the development and optimization of spiral
loaded cavities since the 1970s [A. Schempp et al, NIM 135, 409 (1976)]. These
cavities feature a high efficiency, a compact design and a big variety of
possible fields of application. They find use both as bunchers and post
accelerators to vary the final energy of the beam. In comparison to other
available designs, the advantage of these structures lies in their small size.
Furthermore they can easily be tuned to the required resonance frequency by
varying the length of the spiral. Due to the small size of the cavities the
required budget can also be kept low. Here, two slightly different types of
spiral loaded cavities, which were built for the REX-ISOLDE project at CERN and
the intensity upgrade program at GSI are being discussed.
| [
{
"version": "v1",
"created": "Fri, 28 Jul 2000 11:34:26 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Welsch",
"C. P.",
""
],
[
"Kuehnel",
"K. -U.",
""
],
[
"Schempp",
"A.",
""
]
] |
physics/0007089 | Mr. Arindam Mitra Physics Group | Arindam Mitra | Unconditionally secure quantum bit commitment is simply possible | Latex 14 pages, revised version | null | null | null | physics.gen-ph | null | Mayers, Lo and Chau proved unconditionally secure quantum bit commitment is
impossible. It is shown that their proof is valid only for a particular model
of quantum bit commitment encoding, in general it does not hold good. A
different model of unconditionally secure quantum bit commitment - both
entanglement and disentanglement-based - is presented. Even cheating can be
legally proved with some legal evidences. Unconditionally secure quantum bit
commitment can be established on the top of unconditionally secure quantum coin
tossing, which is also claimed to be two-way impossible.
| [
{
"version": "v1",
"created": "Fri, 28 Jul 2000 11:48:50 GMT"
},
{
"version": "v2",
"created": "Tue, 26 Sep 2000 13:24:12 GMT"
},
{
"version": "v3",
"created": "Tue, 6 Feb 2001 11:08:46 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Mitra",
"Arindam",
""
]
] |
physics/0007090 | Mr. Arindam Mitra Physics Group | Arindam Mitra | Entanglement versus disentanglement: Quantum Cryptography | Latex 8 pages, Revised version | null | null | null | physics.gen-ph | null | In quantum information, the role of entanglement and disentanglement is
itself a subject of research and debate. Earlier works on quantum cryptography
have almost established that entanglement has no special advantage in quantum
cryptography. In this paper we reveal that entanglement is better ingredient
than disentanglement for our alternative quantum cryptography.
| [
{
"version": "v1",
"created": "Fri, 28 Jul 2000 12:12:41 GMT"
},
{
"version": "v2",
"created": "Tue, 26 Sep 2000 13:16:02 GMT"
},
{
"version": "v3",
"created": "Tue, 6 Feb 2001 11:13:34 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Mitra",
"Arindam",
""
]
] |
physics/0007092 | Alvaro Meseguer | Lloyd N. Trefethen (1), S. J. Chapman (2), Dan S. Henningson (3),
Alvaro Meseguer (1), Tom Mullin (4) and F. T. M Nieuwstadt (5) ((1) Oxford
University Computing Laboratory. Oxford, UK. (2) OCIAM, Mathematical
Institute, Oxford, UK. (3) Dept. of Mechanics, Royal Institute of Technology,
Stockholm, Sweden. (4) Dept. of Physics and Astronomy, University of
Manchester, Manchester, UK. (5) J. M. Burgers Centre, Deltf U. of Technology,
Delft, Netherlands.) | Threshold amplitudes for transition to turbulence in a pipe | null | null | null | null | physics.flu-dyn physics.comp-ph | null | Although flow in a circular pipe is stable to infinitesimal perturbations, it
can be excited to turbulence by finite perturbations whose minimal amplitude
shrinks as R goes to infinity (R = Reynolds number). Laboratory experiments
have appeared to disagree with one another and with theoretical predictions
about the dependence of this minimal amplitude on $R$, with published results
ranging approximately from $R^{-1/4}$ to $R^{-3/2}$. Here it is shown that
these discrepancies can be explained by the use of different definitions of
amplitude by different authors. An attempt is made to convert the existing
results to a uniform definition of amplitude, the nondimensionalized $L^2$
definition common in the theoretical literature. Although subtleties in the
physics raise some questions, agreement appears to be reached on a minimal
amplitude that scales as $R^{-3/2 \pm 0.3}$.
| [
{
"version": "v1",
"created": "Fri, 28 Jul 2000 16:08:37 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Trefethen",
"Lloyd N.",
""
],
[
"Chapman",
"S. J.",
""
],
[
"Henningson",
"Dan S.",
""
],
[
"Meseguer",
"Alvaro",
""
],
[
"Mullin",
"Tom",
""
],
[
"Nieuwstadt",
"F. T. M",
""
]
] |
physics/0007096 | Peter Sheridan Dodds | Peter Sheridan Dodds, Daniel H. Rothman, and Joshua S. Weitz | Re-examination of the "3/4-law" of Metabolism | Revtex4, 14 pages, 5 figures, submitted to Journal of Theoretical
Biology | J. Theor. Biol., 209(1), pp 9-29 (2003) | null | null | physics.bio-ph physics.data-an q-bio.OT | null | We examine the scaling law $B \propto M^{\alpha}$ which connects organismal
metabolic rate $B$ with organismal mass $M$, where $\alpha$ is commonly held to
be 3/4. Since simple dimensional analysis suggests $\alpha=2/3$, we consider
this to be a null hypothesis testable by empirical studies. We re-analyze data
sets for mammals and birds compiled by Heusner, Bennett and Harvey, Bartels,
Hemmingsen, Brody, and Kleiber, and find little evidence for rejecting
$\alpha=2/3$ in favor of $\alpha=3/4$. For mammals, we find a possible
breakdown in scaling for larger masses reflected in a systematic increase in
$\alpha$. We also review theoretical justifications of $\alpha=3/4$ based on
dimensional analysis, nutrient-supply networks, and four-dimensional biology.
We find that present theories for $\alpha=3/4$ require assumptions that render
them unconvincing for rejecting the null hypothesis that $\alpha=2/3$.
| [
{
"version": "v1",
"created": "Fri, 28 Jul 2000 21:25:08 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Dodds",
"Peter Sheridan",
""
],
[
"Rothman",
"Daniel H.",
""
],
[
"Weitz",
"Joshua S.",
""
]
] |
physics/0007098 | Eric Altschuler | E.L. Altschuler | Suggestion for a Fast Heuristic for the Hamiltonian Cycle Problem | null | null | null | null | physics.comp-ph | null | Some years ago I demonstrated a simulated annealing heuristic for the
Hamiltonian cycle problem (Science 273, 413 (1996)). Here I propose an improved
version of this heuristic.
| [
{
"version": "v1",
"created": "Sun, 30 Jul 2000 21:43:11 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Altschuler",
"E. L.",
""
]
] |
physics/0008001 | Michael Lalayan | A. Blednykh (1), D. Kostin (1), V. Kaljuzhny (1), M. Lalayan (1), O.
Milovanov (1), A. Ponomarenko (1), N. Sobenin (1), A. Sulimov (1), D. Trubin
(1), A. Zavadzev (1), M. Dohlus (2) ((1) MEPhI Moscow Russia (2) DESY Humburg
Germany) | Rectangular Waveguide HOM Couplers for a TESLA Superstructure | LINAC2000 TUA13, 3 pages, 4 figures, 3 tables | eConf C000821 (2000) TUA13 | null | null | physics.acc-ph | null | Some modifications of a Rectangular Waveguide HOM couplers for TESLA
superstructure have been investigated. These RWG HOM couplers are to be
installed between the cavities of the superstructure and also at the both ends
of it. We investigated a RWG HOM coupler attached to the beam pipe through the
slots orientated along beam pipe axis (longitudinal slots), perpendicular to it
(azimutal slots) and at some angle to this axis. For dipole modes of both
polarizations damping two RWG in every design were used. This paper presents
the results obtained for scaled-up setup at 3 GHz at room temperature. The
advantages of HOM coupler with longitudinal slots for damping dipole modes and
compact HOM coupler with slots at some angle to the axis are shown. Arrangement
of HOM coupler in cryostat and heating due to HOM and FM losses are presented.
Calculations and design of the feeding RWG coupler for superstructure are also
presented.
| [
{
"version": "v1",
"created": "Tue, 1 Aug 2000 10:34:12 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Blednykh",
"A.",
""
],
[
"Kostin",
"D.",
""
],
[
"Kaljuzhny",
"V.",
""
],
[
"Lalayan",
"M.",
""
],
[
"Milovanov",
"O.",
""
],
[
"Ponomarenko",
"A.",
""
],
[
"Sobenin",
"N.",
""
],
[
"Sulimov",
"A.",
""
],
[
"Trubin",
"D.",
""
],
[
"Zavadzev",
"A.",
""
],
[
"Dohlus",
"M.",
""
]
] |
physics/0008005 | Rainer Wanzenberg | Rainer Wanzenberg | A Fast Switchyard for the TESLA FEL-Beam Using a Superconducting
Transverse Mode Cavity | 3 pages, 6 figures, LINAC 2000 Conf., Monterey, CA, Aug. 21-25,
Poster TUA14 | eConf C000821 (2000) TUA14 | null | null | physics.acc-ph | null | In the present design of the TESLA Linear Collider with integrated X-ray
Laser Facility it is necessary that 1 ms long bunch trains with about 10000
bunches are generated and distributed to several free electron laser (FEL) beam
lines. The different scientific applications of the X-ray FELs need specific
filling patterns of the bunches in the bunch train. It is shown that a fast
switch-yard based on a superconducting transverse mode cavity can be used to
generate the required bunch pattern in a flexible way while keeping the beam
loading in the main linear accelerator constant. The conceptual design of the
beam optics and the transverse mode cavity are presented.
| [
{
"version": "v1",
"created": "Thu, 3 Aug 2000 16:00:34 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Wanzenberg",
"Rainer",
""
]
] |
physics/0008006 | Giuseppe Giuliani | Giuseppe Giuliani | On electromagnetic induction | 17 pages; 5 figures | null | null | null | physics.class-ph | null | A general law for electromagnetic induction phenomena is derived from Lorentz
force and Maxwell equation connecting electric field and time variation of
magnetic field. The derivation provides with a unified mathematical treatment
the statement according to which electromagnetic induction is the product of
two independent phenomena: time variation of magnetic field and effects of
magnetic field on moving charges. The general law deals easily-without ad hoc
assumptions-with typical cases usually considered as exceptions to the flux
rule and contains the flux rule as a particular case.
| [
{
"version": "v1",
"created": "Thu, 3 Aug 2000 19:58:07 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Giuliani",
"Giuseppe",
""
]
] |
physics/0008008 | Gennady Stupakov | G. V. Stupakov | Suppression of beam breakup instability in a long train by introducing
energy spread between the bunches | 3 pages, 6 figures, submission MOE04 to LINAC2000 | eConf C000821 (2000) MOE04 | null | null | physics.acc-ph | null | Interaction between the bunches in the NLC main linac via long range
wakefields can cause a beam breakup instability. Although the magnitude of the
long range wakefields for an ideal NLC structure is below the instability
threshold, the wake increases when structure manufacturing errors are taken
into account. In case of large errors, the developing instability can result in
the projected emittance dilution of the bunch train. To suppress the
instability, we propose to introduce an energy spread between the bunches,
similar to the BNS energy spread for damping of the beam breakup within a
single bunch. Based on simple estimates, we show that the energy spread of
order of 1-2% should be enough for suppression of the instability. The results
of computer simulations with the simulation code LIAR confirm theoretical
estimates and indicate that both the tolerances for structure misalignments and
the incoming beam jitter can be considerably loosened by introducing the energy
spread within the beam.
| [
{
"version": "v1",
"created": "Thu, 3 Aug 2000 22:38:40 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Stupakov",
"G. V.",
""
]
] |
physics/0008010 | A. Mary Selvam | A.Mary Selvam | Universal quantification for deterministic chaos in dynamical systems | 8 pages, 4 figures | Applied Mathematical Modelling, 1993, Vol.17, 642-649 | null | null | physics.gen-ph | null | A cell dynamical system model for deterministic chaos enables precise
quantification of the round-off error growth,i.e., deterministic chaos in
digital computer realizations of mathematical models of continuum dynamical
systems. The model predicts the following: (a) The phase space trajectory
(strange attractor) when resolved as a function of the computer accuracy has
intrinsic logarithmic spiral curvature with the quasiperiodic Penrose tiling
pattern for the internal structure. (b) The universal constant for
deterministic chaos is identified as the steady-state fractional round-off
error k for each computational step and is equal to 1 /sqr(tau) (=0.382) where
tau is the golden mean. (c) The Feigenbaum's universal constants a and d are
functions of k and, further, the expression 2(a**2) = (pie)*d quantifies the
steady-state ordered emergence of the fractal geometry of the strange
attractor. (d) The power spectra of chaotic dynamical systems follow the
universal and unique inverse power law form of the statistical normal
distribution.
| [
{
"version": "v1",
"created": "Fri, 4 Aug 2000 09:21:45 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Selvam",
"A. Mary",
""
]
] |
physics/0008011 | Dagoberto S. Freitas | Dagoberto S Freitas, Jairo R de Oliveira | A Variational Approach in the Dissipative Nonlinear Schr\"{o}dinger
Equation | 8 pages, 1 figures | null | null | null | physics.optics | null | The properties of pulse propagation in a nonlinear fiber including linear
damped term added in the usual nonlinear Schr\"odinger equation is analyzed
analytically. We apply variational modified approach based on the lagrangian
that describe the dynamic of system and with a trial function we obtain a
solution which is more accuracy when compared with a pertubative solution. As a
result, the problem of pulse propagation in a fiber with loss can be described
in good agreement with exact results.
| [
{
"version": "v1",
"created": "Fri, 4 Aug 2000 18:09:52 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Freitas",
"Dagoberto S",
""
],
[
"de Oliveira",
"Jairo R",
""
]
] |
physics/0008015 | Gennady Romanov | L.V.Kravchuk, G.V.Romanov, S.G.Tarasov | Multipactoring Code for 3D Accelerating Structures | XX International Linac Conference, code THB12, 3 pages, 8 figures | eConf C000821 (2000) THB12 | null | null | physics.acc-ph | null | The simulation code has been developed to investigate possible electron
multi- pacting in the 3D RF cavities using preliminary calculated field
components. The code provides different options of numerical study of the
electron multi- pacting including search of the resonant trajectories and
simulation of an electron multiplication.
| [
{
"version": "v1",
"created": "Mon, 7 Aug 2000 19:35:03 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Kravchuk",
"L. V.",
""
],
[
"Romanov",
"G. V.",
""
],
[
"Tarasov",
"S. G.",
""
]
] |
physics/0008019 | A. K. Popov | A. K. Popov and Alexander S. Bayev (Institute for Physics, Russian
Academy of Sciences, Krasnoyarsk, Russia), Thomas F. George (Office of the
Chancellor / Departments of Chemistry and Physics & Astronomy, University of
Wisconsin-Stevens Point, Stevens Point, U.S.A) and Vladimir M. Shalaev
(Department of Physics, New Mexico State University, Las Cruces, USA) | Four-wave mixing at maximum coherence and eliminated Doppler broadening
controlled with the driving fields | LaTeX, 11 pages including 8 figures, to be published in European
Physics Journal D: EPJdirect (submited June 03, 2000) | EPJdirect D1 (2000) 1-12,
http://link.springer.de/link/service/journals/10105/tocs/t0002d.htm | null | null | physics.optics physics.atom-ph quant-ph | null | New feasibity of coherent quantum control of four-wave mixing processes in a
resonant Doppler-broadened medium are studied. We propose a technique which
enables one to enhance the quantum efficiency of nonlinear optical conversion.
At the same time, it allows one to decrease the required intensities of the
fundamental beams compared to those necessary in the approach based on coherent
population trapping. The major outcomes of the analysis are illustrated with
numerical simulation addressed within a practical medium.
| [
{
"version": "v1",
"created": "Tue, 8 Aug 2000 09:20:09 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Popov",
"A. K.",
"",
"Institute for Physics, Russian\n Academy of Sciences, Krasnoyarsk, Russia"
],
[
"Bayev",
"Alexander S.",
"",
"Institute for Physics, Russian\n Academy of Sciences, Krasnoyarsk, Russia"
],
[
"George",
"Thomas F.",
"",
"Office of the\n Chancellor / Departments of Chemistry and Physics & Astronomy, University of\n Wisconsin-Stevens Point, Stevens Point, U.S.A"
],
[
"Shalaev",
"Vladimir M.",
"",
"Department of Physics, New Mexico State University, Las Cruces, USA"
]
] |
physics/0008020 | Zherebtsov A. V. | O.K.Belyaev, O.V.Ershov, I.G.Maltsev, V.B.Stepanov,
S.A.Strekalovskikh, V.A.Teplyakov, A.V.Zherebtsov | IHEP Experience on Creation and Operation of RFQS | 3 pages, 7 figures, LINAC2000 Conference, PDF format | eConf C000821 (2000) MOD21 | null | MOD21 | physics.acc-ph | null | The new 1.8 MeV proton RFQ was completed and started operation in the IHEP in
1997. It was built according to the plan of modernization of the injection
system to the booster of the IHEP proton synchrotron.
| [
{
"version": "v1",
"created": "Tue, 8 Aug 2000 08:57:38 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Belyaev",
"O. K.",
""
],
[
"Ershov",
"O. V.",
""
],
[
"Maltsev",
"I. G.",
""
],
[
"Stepanov",
"V. B.",
""
],
[
"Strekalovskikh",
"S. A.",
""
],
[
"Teplyakov",
"V. A.",
""
],
[
"Zherebtsov",
"A. V.",
""
]
] |
physics/0008022 | Bondarev | Boris Bondarev, Alexander Durkin, Stanislav Vinogradov, Igor Shumakov | New Tasks and New Codes for RFQ Beam Simulation | LINAC'2000 THB15 | eConf C000821 (2000) THB15 | null | null | physics.acc-ph | null | Proton linear accelerator is the base Accelerator Driven Power System (ADS).
Such ADS are dedicated to various purposes: weapon plutonium conversion,
"energy amplifier", transmutation of radionuclear wastes etc. Solution of these
tasks requires proton beams with energy 1 GeV and average current up to 30 mA.
At the moment there are no problems of fundamental nature in such linac
construction. The main problems have economic and technical aspects. Problems
of CW linac will be demonstrated on the base beam dynamics requirements. New
code package LIDOS.RFQ.Designer makes possible to simulate beam dynamics in RF
fields of real vane shape (including gaps between RFQ section) as well as to
determine channel parameters tolerances for reliable operation
| [
{
"version": "v1",
"created": "Wed, 9 Aug 2000 08:53:13 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Bondarev",
"Boris",
""
],
[
"Durkin",
"Alexander",
""
],
[
"Vinogradov",
"Stanislav",
""
],
[
"Shumakov",
"Igor",
""
]
] |
physics/0008023 | Bondarev | Boris I. Bondarev, Alexander P. Durkin | RFQ Parameter Choice by Multi-Parameter Optimization | LINAC'2000 THB11 | eConf C000821 (2000) THB11 | null | null | physics.acc-ph | null | Experts in different accelerator laboratories accumulated wide experience in
RFQ designing. Nevertheless new tasks on high-power, high-energy CW linac
designing (for example, for ADT applications) were appeared recently. Such
accelerators must be practically free of beam losses. This main condition
placed more stringent requirements upon beam quality at the input of each linac
part. Because RFQ is used as beginning part in above accelerators beam
high-quality requirements is related to RFQ primarily. It means that existing
experience in RFQ designing must be enriching by new approaches and new
methodology
| [
{
"version": "v1",
"created": "Wed, 9 Aug 2000 09:00:15 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Bondarev",
"Boris I.",
""
],
[
"Durkin",
"Alexander P.",
""
]
] |
physics/0008024 | David J. S. Findlay | J.P. Duke, A.P. Letchford and D.J.S. Findlay | Measurements of RF Cavity Voltages by X-ray Spectrum Measurements | For LINAC 2000 Conference, Monterey, 21-25 August 2000 Paper no.
MOC08 Second PostScript version to replace first PostScript version in which
caption to Fig. 1 overflowed on to second page | eConf C000821 (2000) MOc08 | null | null | physics.acc-ph | null | Measurement of the endpoints of X-ray spectra emitted from RF cavities is a
useful non-invasive technique for measuring peak voltages within the cavities.
The matching of calculated X-ray spectra to measured spectra is described, with
emphasis upon the endpoint region.
| [
{
"version": "v1",
"created": "Wed, 9 Aug 2000 16:30:04 GMT"
},
{
"version": "v2",
"created": "Fri, 11 Aug 2000 08:14:11 GMT"
},
{
"version": "v3",
"created": "Mon, 14 Aug 2000 11:12:54 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Duke",
"J. P.",
""
],
[
"Letchford",
"A. P.",
""
],
[
"Findlay",
"D. J. S.",
""
]
] |
physics/0008034 | Kuriki Masao | M. Kuriki (1), H. Hayano (1), T. Naito (1), T. Okugi (1),V. Vogel (2)
((1) KEK, (2)BINP) | Energy stabilization of 1.5 GeV S-Band linac | Submission for LINAC 2000, THA11 | eConf C000821 (2000) THA11 | null | null | physics.acc-ph | null | KEK-ATF is studying low emittance, multi-bunch electron beam for the future
linear collider. The energy instability of the 1.5 GeV linac has been a problem
making the beam injection to the damping ring unstable. Because the unstable
beam generates also large amount of the radiation, the beam current is limited
by the KEK radiation safety policy much lower than what we expect. Stabilizing
the S-band linac is therefore important not only to improve the beam quality,
but also to clear the radiation safety limit to start the multi-bunch
operation.
We have made various modifications to solve the problem on the electron gun,
modulator, klystron etc. For the modulator, we have developed a feed-forward
controlled De-Q module. This module compensates the voltage jitter by
controlling the deQ timing with a feed-forward circuit because the amount of
the excessive charge up is strongly correlated to the charge up slope that can
be measured prior to the deQ timing. The energy stability was examined and was
improved by a factor of 3, from 0.6% to 0.2% of itself. Modification for the
feed-forward circuit to get more stability was made. The test for the new
circuit is in progress. For the long term instability, phase-lock system for
klystron RF is being installed. In the test operation, it showed a good
performance and compensate the phase drift less than 1 deg.
| [
{
"version": "v1",
"created": "Fri, 11 Aug 2000 10:52:16 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Kuriki",
"M.",
"",
"KEK"
],
[
"Hayano",
"H.",
"",
"KEK"
],
[
"Naito",
"T.",
"",
"KEK"
],
[
"Okugi",
"T.",
"",
"KEK"
],
[
"Vogel",
"V.",
"",
"BINP"
]
] |
physics/0008035 | Sung-Ju Park | S. J. Park, J. S. Oh, J. S. Bak, M. H. Cho, W. Namkung (Pohang
Accelerator Laboratory, POSTECH, Pohang, Korea) | 2.856-GHz Modulation of Conventional Triode Electron Gun | 3 pages including 7 figures; To be submitted to the LINAC2000
conference, Paper No. MOB18; Minor changes in grammer | eConf C000821 (2000) MOB18 | null | null | physics.acc-ph | null | For the generation of picosecond (< 100 ps) electron beam pulses, we studied
the RF modulation of a conventional triode electron gun. The feasibility study
for this scheme has been experimentally investigated by modulating a triode gun
of the Y-824 cathode-grid (KG) structure provided by the CPI Eimac, with
2.856-GHz pulsed RF generated by a solid-state amplifier (SSA). In this paper,
we present the methods and results of this investigation.
| [
{
"version": "v1",
"created": "Fri, 11 Aug 2000 13:44:27 GMT"
},
{
"version": "v2",
"created": "Mon, 14 Aug 2000 02:37:52 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Park",
"S. J.",
"",
"Pohang\n Accelerator Laboratory, POSTECH, Pohang, Korea"
],
[
"Oh",
"J. S.",
"",
"Pohang\n Accelerator Laboratory, POSTECH, Pohang, Korea"
],
[
"Bak",
"J. S.",
"",
"Pohang\n Accelerator Laboratory, POSTECH, Pohang, Korea"
],
[
"Cho",
"M. H.",
"",
"Pohang\n Accelerator Laboratory, POSTECH, Pohang, Korea"
],
[
"Namkung",
"W.",
"",
"Pohang\n Accelerator Laboratory, POSTECH, Pohang, Korea"
]
] |
physics/0008037 | Roger A. Richardson | Roger A. Richardson, Stephen Sampayan, John T. Weir | Elliptical X-Ray Spot Measurement | Postscript file, for LINAC2000 conference | eConf C000821 (2000) MOc07 | null | null | physics.ins-det | null | The so-called roll bar measurement uses a heavy metal material, optically
thick to x-rays, to form a shadow of the x-ray origination spot. This spot is
where an energetic electron beam interacts with a high Z target. The material
(the "roll bar") is slightly curved to avoid alignment problems. The roll bar
is constructed and positioned so that the x-rays are shadowed in the horizontal
and vertical directions, so information is obtained in two dimensions. If a
beam profile is assumed (or measured by other means), the equivalent x-ray spot
size can be calculated from the x-ray shadow cast by the roll bar. Thus the
ellipticity of the beam can be calculated, assuming the ellipse of the x-ray
spot is aligned with the roll bar. The data is recorded using a scintillator
and gated camera. Data will be presented from measurements using the ETA II
induction LINAC. The accuracy of the measurement is checked using small
elliptical targets.
| [
{
"version": "v1",
"created": "Fri, 11 Aug 2000 17:40:19 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Richardson",
"Roger A.",
""
],
[
"Sampayan",
"Stephen",
""
],
[
"Weir",
"John T.",
""
]
] |
physics/0008038 | Shuichi Okuda | S. Okuda, T. Yamamoto, S. Suemine, G. Isoyama | High-intensity single-bunch electron beam generation with the 38 MeV
L-band linac in Osaka University | paper for linac2000 ID: MOB20 | eConf C000821 (2000) MOB20 | null | null | physics.acc-ph | null | The characteristics of the high-intensity single-bunch electron beam of the
38 MeV L-band electron linac at the Institute of Scientific and Industrial
Research in Osaka University were investigated.
| [
{
"version": "v1",
"created": "Sat, 12 Aug 2000 05:22:23 GMT"
},
{
"version": "v2",
"created": "Thu, 31 Aug 2000 05:23:06 GMT"
},
{
"version": "v3",
"created": "Tue, 19 Sep 2000 03:50:39 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Okuda",
"S.",
""
],
[
"Yamamoto",
"T.",
""
],
[
"Suemine",
"S.",
""
],
[
"Isoyama",
"G.",
""
]
] |
physics/0008040 | Shigeki Fukuda | S. Fukuda, A. Anami, C. Kubota, M. Kawamura, S. Yamaguchi, M. Ono, H.
Nakanishi, S. Miyake, M. Sakamoto | The RF source of the 60-MeV Linac for the KEK/JAERI Joint Project | 3 pages, 3 figures, conference | eConf C000821 (2000) THE02 | null | null | physics.acc-ph | null | The construction of the 60-MeV proton linac has started as a low-energy front
of the KEK/JAERI Joint Project for a high-intensity proton accelerator facility
at KEK. The accelerating frequency is 324 MHz. Five UHF klystrons are used as
an rf source; their ratings have a maximum power of 3 MW, a beam pulse width of
a 700 micro-sec (an rf pulse width is 650 micro-sec) and a repetition rate of
50 pps. We have manufactured a proto-type rf source (a power-supply system with
a modulating-anode pulse modulator and prototype klystrons). In this paper, the
specifications and developments of the rf source, including the WR-2300
waveguide system, are summarized. During the manufacturing process, strong
oscillations due to back-going electrons from the collector were observed. This
phenomenon was analyzed both experimentally and theoretically. We have tested
up to an output power of nearly 3 MW, and succeeded to test the DTL hot-model
structure.
| [
{
"version": "v1",
"created": "Sat, 12 Aug 2000 09:33:33 GMT"
},
{
"version": "v2",
"created": "Thu, 17 Aug 2000 06:39:52 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Fukuda",
"S.",
""
],
[
"Anami",
"A.",
""
],
[
"Kubota",
"C.",
""
],
[
"Kawamura",
"M.",
""
],
[
"Yamaguchi",
"S.",
""
],
[
"Ono",
"M.",
""
],
[
"Nakanishi",
"H.",
""
],
[
"Miyake",
"S.",
""
],
[
"Sakamoto",
"M.",
""
]
] |
physics/0008042 | Don Edwards | D. Edwards, H. Edwards, N. Holtkamp, S. Nagaitsev, J. Santucci, R.
Brinkmann, K. Desler, K. Floettmann, I. Bohnet, M. Ferrario | The Flat Beam Experiment at the FNAL Photoinjector | Linac2000 conf paper, 3 pages and 4 figures | eConf C000821 (2000) THc13 | null | null | physics.acc-ph | null | A technique for production of an electron beam with a high transverse
emittance ratio. a "flat" beam, has been proposed by Brinkmann, Derbenev, and
Floettmann.[1] The cathode of an RF-laser gun is immersed in a solenoidal
magnetic field; as a result the beam emitted from a round laser spot has a net
angular momentum. Subsequent passage through a quadrupole channel that has a 90
degree difference in phase advance between the transverse degrees of freedom
results in a flat beam. Experimental study is underway at the Fermilab A0
Photoinjector. Thus far, transverse emittance ratios as high as 50 have been
observed, and the results are in substantial agreement with simulation.
[1] R. Brinkmann, Ya. Derbenev, K. Floettmann, "A Flat Beam Electron Source
for Linear Colliders." TESLA Note 99-09, April 1999.
| [
{
"version": "v1",
"created": "Sat, 12 Aug 2000 18:13:32 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Edwards",
"D.",
""
],
[
"Edwards",
"H.",
""
],
[
"Holtkamp",
"N.",
""
],
[
"Nagaitsev",
"S.",
""
],
[
"Santucci",
"J.",
""
],
[
"Brinkmann",
"R.",
""
],
[
"Desler",
"K.",
""
],
[
"Floettmann",
"K.",
""
],
[
"Bohnet",
"I.",
""
],
[
"Ferrario",
"M.",
""
]
] |
physics/0008043 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Multiscale Analysis of RMS Envelope Dynamics | 3 pages, 1 figure, JAC2000.cls, presented at LINAC 2000, paper MOE14 | eConf C000821 (2000) MOE14 | null | null | physics.acc-ph math-ph math.MP nlin.CD physics.comp-ph | null | We present applications of variational -- wavelet approach to different forms
of nonlinear (rational) rms envelope equations. We have the representation for
beam bunch oscillations as a multiresolution (multiscales) expansion in the
base of compactly supported wavelet bases.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 11:13:19 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
] |
physics/0008044 | Yoshihisa Iwashita | Y. Iwashita | DFQ--Double Frequency RFQ | Linac200 oral poster MOE20, PS file, MSWORD 5.1a | eConf C000821 (2000) MOE20 | null | null | physics.acc-ph | null | RFQ with a harmonic higher order quadrupole mode is studied. Assuming that we
superpose a higher order mode with twice the frequency of the fundamental mode,
a sawtooth waveform is approximated. In such a case, the bunching function is
enhanced while the transverse stability is modified. Second order longitudinal
harmonic component is also required to enable the effect.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 13:30:32 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Iwashita",
"Y.",
""
]
] |
physics/0008045 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Multiresolution Representation for Orbital Dynamics in Multipolar Fields | 3 pages, 3 figures, JAC2000.cls, Proc. European Particle Accelerator
Conf., EPAC00, Vienna, 2000 | null | null | null | physics.acc-ph math-ph math.MP nlin.PS physics.comp-ph | null | We present the applications of variation -- wavelet analysis to
polynomial/rational approximations for orbital motion in transverse plane for a
single particle in a circular magnetic lattice in case when we take into
account multipolar expansion up to an arbitrary finite number and additional
kick terms. We reduce initial dynamical problem to the finite number (equal to
the number of n-poles) of standard algebraical problems. We have the solution
as a multiresolution (multiscales) expansion in the base of compactly supported
wavelet basis.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 15:39:10 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
] |
physics/0008046 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Nonlinear Beam Dynamics and Effects of Wigglers | 3 pages, 3 figures, JAC2000.cls, Proc. European Particle Accelerator
Conf., EPAC00, Vienna, 2000 | null | null | null | physics.acc-ph math-ph math.MP nlin.AO physics.comp-ph | null | We present the applications of variational--wavelet approach for the
analytical/numerical treatment of the effects of insertion devices on beam
dynamics. We investigate the dynamical models which have polynomial
nonlinearities and variable coefficients. We construct the corresponding
wavelet representation for wigglers and undulator magnets.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 15:53:54 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
] |
physics/0008047 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Spin-Orbital Motion: Symmetry and Dynamics | 3 pages, 4 figures, JAC2000.cls, Proc. European Particle Accelerator
Conf., EPAC00, Vienna, 2000 | null | null | null | physics.acc-ph math-ph math.MP nlin.PS physics.comp-ph | null | We present the applications of variational--wavelet approach to nonlinear
(rational) model for spin-orbital motion: orbital dynamics and Thomas-BMT
equations for classical spin vector. We represent the solution of this
dynamical system in framework of periodical wavelets via variational approach
and multiresolution.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 16:11:25 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
] |
physics/0008048 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Local Analysis of Nonlinear RMS Envelope Dynamics | 3 pages, 4 figures, JAC2000.cls, Proc. European Particle Accelerator
Conf., EPAC00, Vienna, 2000 | null | null | null | physics.acc-ph math-ph math.MP nlin.AO physics.comp-ph | null | We present applications of variational -- wavelet approach to nonlinear
(rational) rms envelope dynamics. We have the solution as a multiresolution
(multiscales) expansion in the base of compactly supported wavelet basis.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 16:25:49 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
] |
physics/0008049 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Multiscale Representations for Solutions of Vlasov-Maxwell Equations for
Intense Beam Propagation | 3 pages, 3 figures, JAC2000.cls, Proc. European Particle Accelerator
Conf., EPAC00, Vienna, 2000 | null | null | null | physics.acc-ph math-ph math.MP nlin.PS physics.comp-ph | null | We present the applications of variational--wavelet approach for computing
multiresolution/multiscale representation for solution of some approximations
of Vlasov-Maxwell equations.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 17:09:10 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
] |
physics/0008050 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Quasiclassical Calculations in Beam Dynamics | 3 pages, 2 figures, JAC2000.cls, Proc. European Particle Accelerator
Conf., EPAC00, Vienna, 2000 | null | null | null | physics.acc-ph math-ph math.MP nlin.PS physics.comp-ph | null | We present some applications of general harmonic/wavelet analysis approach
(generalized coherent states, wavelet packets) to numerical/analytical
calculations in (nonlinear) quasiclassical/quantum beam dynamics problems.
(Naive) deformation quantization, multiresolution representations and Wigner
transform are the key points.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 17:18:40 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
] |
physics/0008052 | Erk Jensen | G. Carron, E. Jensen, M. Luong, A. Millich, E. Rugo, I. Syratchev, L.
Thorndahl | Design of a 3 GHz Accelerator Structure for the CLIC Test Facility (CTF
3) Drive Beam | Contribution to Linac 2000 Conference, TUA16 (Poster) | eConf C000821 (2000) TUA16 | null | null | physics.acc-ph | null | For the CLIC two-beam scheme, a high-current, long-pulse drive beam is
required for RF power generation. Taking advantage of the 3 GHz klystrons
available at the LEP injector once LEP stops, a 180 MeV electron accelerator is
being constructed for a nominal beam current of 3.5 A and 1.5 microsecond pulse
length. The high current requires highly effective suppression of dipolar
wakes. Two concepts are investigated for the accelerating structure design: the
"Tapered Damped Structure" developed for the CLIC main beam, and the "Slotted
Iris - Constant Aperture" structure. Both use 4 SiC loads per cell for
effective higher-order mode damping. A full-size prototype of the TDS structure
has been built and tested successfully at full power. A first prototype of the
SICA structure is being built.
| [
{
"version": "v1",
"created": "Mon, 14 Aug 2000 11:36:51 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Carron",
"G.",
""
],
[
"Jensen",
"E.",
""
],
[
"Luong",
"M.",
""
],
[
"Millich",
"A.",
""
],
[
"Rugo",
"E.",
""
],
[
"Syratchev",
"I.",
""
],
[
"Thorndahl",
"L.",
""
]
] |
physics/0008055 | Holger Zimmermann | H. Zimmermann | Funneling with the Two-Beam RFQ | 3 pages, 11 figures | eConf C000821 (2000) THB02 | null | IAP03082000 | physics.acc-ph | null | New high current accelerator facilities like proposed for HIDIF or ESS
require a beam with a high brilliance. These beams can not be produced by a
single pass rf-linac. The increase in brightness in such a driver linac is done
by several funneling stages at low energies, in which two identically bunched
ion beams are combined into a single beam with twice the frequency current and
brightness. Our Two-Beam-RFQ funneling experiment is a setup of two ion
sources, a two beam RFQ, a funnel deflector and beam diagnostic equipment to
demonstrate funneling of ion beams as a model for the first funneling stage of
a HIIF driver. The progress of the funneling experiment and results of
simulations will be presented.
| [
{
"version": "v1",
"created": "Mon, 14 Aug 2000 17:48:34 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Zimmermann",
"H.",
""
]
] |
physics/0008057 | Arthur C. Paul | Arthur C. Paul | Reconstruction of Initial Beam Conditions at the Exit of the DARHT II
Accelerator | 3 pages, 3 figures, LINAC2000 paper TUB10 | eConf C000821 (2000) TUB10 | null | null | physics.acc-ph | null | We consider a technique to determine the initial beam conditions of the DARHT
II Accelerator by measuring the beam size under three different magnetic
transport settings. This may be time gated to resolve the parameters as a
function of time within the 2000 nsec pulse. This technique leads to three
equations in three unknowns with solution giving the accelerator exit beam
radius, tilt and emittance. We find that systematic errors cancel and so are
not a problem in unfolding the initial beam conditions. Random uncorrelated
shot to shot errors can be managed by one of three strategies: 1) make the
transport system optically de-magnifying; 2) average over many individual
shots; or 3) make the random uncorrelated shot to shot errors sufficiently
small. The high power of the DARHT II beam requires that the beam transport
system leading to a radius measuring apparatus be optically magnifying. This
means that the shot to shot random errors must either be made small (less than
about 1%) or that we average each of the three beam radius determinations over
many individual shots.
| [
{
"version": "v1",
"created": "Mon, 14 Aug 2000 18:44:07 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Paul",
"Arthur C.",
""
]
] |
physics/0008058 | Denis V. Juriev | Denis V. Juriev | Quantum string field theory and psychophysics | null | null | null | null | physics.gen-ph | null | The quantum string field theoretic structure of interactive phenomena is
discussed
| [
{
"version": "v1",
"created": "Mon, 14 Aug 2000 20:47:37 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Juriev",
"Denis V.",
""
]
] |
physics/0008059 | Glen Westenskow | G. A. Westenskow, L. R. Bertolini, P.T. Duffy, A. C. Paul | The Mechanical Design for the Darht-II Downstream Beam Transport Line | 3 pages, 4 figures, LINAC2000, TUB16 | eConf C000821 (2000) TUB16 | null | null | physics.acc-ph | null | This paper describes the mechanical design of the downstream beam transport
line for the second axis of the Dual Axis Radiographic Hydrodynamic Test (DARHT
II) Facility. The DARHT-II project is a collaboration between LANL, LBNL and
LLNL. DARHT II is a 20-MeV, 2000-Amperes, 2-msec linear induction accelerator
designed to generate short bursts of x-rays for the purpose of radiographing
dense objects. The down-stream beam transport line is approximately 20-meter
long region extending from the end of the accelerator to the bremsstrahlung
target. Within this proposed transport line there are 15 conventional solenoid,
quadrupole and dipole magnets; as well as several speciality magnets, which
transport and focus the beam to the target and to the beam dumps. There are two
high power beam dumps, which are designed to absorb 80-kJ per pulse during
accelerator start-up and operation. Aspects of the mechanical design of these
elements are presented.
| [
{
"version": "v1",
"created": "Mon, 14 Aug 2000 21:32:18 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Westenskow",
"G. A.",
""
],
[
"Bertolini",
"L. R.",
""
],
[
"Duffy",
"P. T.",
""
],
[
"Paul",
"A. C.",
""
]
] |
physics/0008060 | Hyun-Kyung Chung | H.-K. Chung, K. Kirby, and J. F. Babb | Theoretical study of the absorption spectra of the sodium dimer | 19 pages, 8 figures, revtex, epsf | Physical Review A. Vol. 63 032516 (2001) | 10.1103/PhysRevA.63.032516 | null | physics.atom-ph physics.chem-ph | null | Absorption of radiation from the sodium dimer molecular states correlating to
Na(3s)-Na(3s) is investigated theoretically. Vibrational bound and continuum
transitions from the singlet X Sigma-g+ state to the first excited singlet A
Sigma-u+ and singlet B Pi-u states and from the triplet a Sigma-u+ state to the
first excited triplet b Sigma-g+ and triplet c Pi-g states are studied
quantum-mechanically. Theoretical and experimental data are used to
characterize the molecular properties taking advantage of knowledge recently
obtained from ab initio calculations, spectroscopy, and ultra-cold atom
collision studies. The quantum-mechanical calculations are carried out for
temperatures in the range from 500 to 3000 K and are compared with previous
calculations and measurements where available.
| [
{
"version": "v1",
"created": "Mon, 14 Aug 2000 23:29:32 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Chung",
"H. -K.",
""
],
[
"Kirby",
"K.",
""
],
[
"Babb",
"J. F.",
""
]
] |
physics/0008066 | Dr. Ralf Eichhorn | R. Eichhorn and U. Ratzinger | Superconducting H-mode Structures for Medium Energy Beams | Linac 2000 Contribution. Poster THD10 | eConf C000821 (2000) THD10 | null | null | physics.acc-ph | null | Room temperature IH-type drift tube structures are used at different places
now for the acceleration of ions with mass over charge ratios up to 65 and
velocities between 0.016 c and 0.1 c. These structures have a high shunt
impedance and allow the acceleration of very intense beams at high accelerating
gradients. The overall power consumption of room temperature IH-mode structures
is comparable with superconducting (sc) structures up to 2 MeV/u. With the
KONUS [1] beam dynamics, the required transversal focusing elements, e.g.
quadrupole triplets can be placed outside of multicell cavities, which is
favourable for building sc H-mode cavities. The design principles and
consequences to the geometry compared to room temperature (rt) cavities will be
described. The results gained from numerical simulations show that a sc
multi-gap H21(0)-mode cavity (CH-type) can be an alternative to the sc
spoke-type or reentrant cavity structures up to beam energies around 150 MeV/u.
The main cavity parameters and possible fabrication options will be discussed.
[1] U. Ratzinger, Nucl. Intr. Meth., A 415 (1998) 229.
| [
{
"version": "v1",
"created": "Tue, 15 Aug 2000 11:24:17 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Eichhorn",
"R.",
""
],
[
"Ratzinger",
"U.",
""
]
] |
physics/0008069 | Daniel E. Rees | D. Rees, W. Roybal, J. Bradley | Collector Failures on 350 MHz, 1.2 MW CW Klystrons at the Low Energy
Demonstration Accelerator (LEDA) | LINAC2000 conference paper THE12 | eConf C000821 (2000) THE12 | null | null | physics.acc-ph | null | We are currently operating the front end of the accelerator production of
tritium (APT) accelerator, a 7 MeV radio frequency quadrapole (RFQ) using
three, 1.2 MW CW klystrons. These klystrons are required and designed to
dissipate the full beam power in the collector. The klystrons have less than
1500 operational hours. One collector has failed and all collectors are
damaged. This paper will discuss the damage and the difficulties in diagnosing
the cause. The collector did not critically fail. Tube operation was still
possible and the klystron operated up to 70% of full beam power with excellent
vacuum. The indication that finally led us to the collector failure was
variable emission. This information will be discussed. A hydrophonic system was
implemented to diagnose collector heating. The collectors are designed to allow
for mixed-phase cooling and with the hydrophonic test equipment we are able to
observe: normal, single-phase cooling, mixed-phase cooling, and a hard boil.
These data will be presented. The worst case beam profile from a collector
heating standpoint is presented. The paper will also discuss the steps taken to
halt the collector damage on the remaining 350 MHz klystrons and design changes
that are being implemented to correct the problem.
| [
{
"version": "v1",
"created": "Tue, 15 Aug 2000 13:06:36 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Rees",
"D.",
""
],
[
"Roybal",
"W.",
""
],
[
"Bradley",
"J.",
""
]
] |
physics/0008070 | Michael T. Lynch | Michael Lynch, William Reass, Daniel Rees, Amy Regan, Paul Tallerico | The Spallation Neutron Source (SNS) Linac RF System | 3 pages, submission THE01 for LINAC 2000 conference, Monterey, Aug.
21-25, 2000 | eConf C000821 (2000) THE01 | null | null | physics.acc-ph | null | The SNS linac accelerates an average beam current of 2 mA to an energy of 968
MeV. The linac is pulsed at 60 Hz with an H- beam pulse of 1 ms. The first 185
Mev of the linac uses normal conducting cavities, and the remaining length of
the linac uses superconducting cavities. The linac operates at 402.5 MHz up to
87 MeV and then changes to 805 MHz for the remainder. This paper gives an
overview of the Linac RF system. The overview includes a description and
configuration of the high power RF components, the HV converter/modulator, and
the RF controls. Issues and tradeoffs in the RF system will be discussed,
especially with regards to the use of pulsed superconducting cavities.
| [
{
"version": "v1",
"created": "Tue, 15 Aug 2000 13:49:05 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Lynch",
"Michael",
""
],
[
"Reass",
"William",
""
],
[
"Rees",
"Daniel",
""
],
[
"Regan",
"Amy",
""
],
[
"Tallerico",
"Paul",
""
]
] |
physics/0008073 | Peter D. Smith | Peter D. Smith | CCT, a Code to Automate the Design of Coupled Cavities | Linac 2000, paper THB14, 3 pages, 3 figures | eConf C000821 (2000) THB14 | null | null | physics.acc-ph | null | The CCT (Coupled Cavity Tuning) code automates the RF calculations and sizing
of RF cavities for the CCL (Coupled Cavity Linac) structures of APT. It is
planned to extend the code to the CCDTL (Coupled Cavity Drift Tube Linac). The
CCT code controls the CCLFISH code, a member of the Poisson Superfish series of
codes [1]. CCLFISH performs RF calculations and tunes the geometry of
individual cavities, including an accelerating cavity (AC) and a coupling
cavity (CC). CCT also relates the AC and CC by means of equations that describe
the coupling slot between cavities. These equations account for the direct
coupling, the next nearest neighbor coupling between adjacent AC's, and the
frequency shifts in the AC and CC caused by the slot. Given design objectives
of a coupling coefficient k, the pi/2 mode frequency, and the net frequency of
the CC, the CCT code iterates to solve for the geometry of the AC and CC and
the separation distance between them (this controls the slot size), satisfying
the design objectives. The resulting geometry is used to automate CAD drawing
preparation. The code can also be used in "as-designed" mode to calculate the
frequencies and coupling of a specified configuration. An overview of the code
is presented.
| [
{
"version": "v1",
"created": "Tue, 15 Aug 2000 19:33:23 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Smith",
"Peter D.",
""
]
] |
physics/0008074 | K. C. Dominic Chan | E. N. Schmierer, K. C. D. Chan, D. C. Gautier, J. G. Gioia, W. B.
Haynes, F. L. Krawczyk, M. A. Madrid, D. L. Schrage, J. A. Waynert, B. Rusnak | High-Power Testing of the APT Power Coupler | LINAC2000 THD16 | eConf C000821 (2000) THD16 | null | null | physics.acc-ph | null | For the baseline APT (Accelerator Production of Tritium) linac design, power
couplers are required to transmit 210-kW of CW RF power to the superconducting
cavities. These APT couplers operate at 700 MHz, have a coaxial design and an
adjustable coupling to the superconducting cavities. Since May 1999, we have
been testing couplers of this design on a room-temperature test stand. We
completed tests at transmitted-power and reflected-power conditions up to 1 MW.
We also tested the couplers with a portion of the outer conductor cooled by
liquid nitrogen. Under this latter condition, we studied the effects of
condensed gases on coupler performance. The results of these tests indicate
that the APT couplers are capable of delivering more than 500 kW to the
cavities. We are in the process of increasing the baseline coupler design
requirement to 420 kW of transmitted power to take advantage of this successful
development. In this paper, we describe the results of our high-power coupler
tests.
| [
{
"version": "v1",
"created": "Tue, 15 Aug 2000 23:06:26 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Schmierer",
"E. N.",
""
],
[
"Chan",
"K. C. D.",
""
],
[
"Gautier",
"D. C.",
""
],
[
"Gioia",
"J. G.",
""
],
[
"Haynes",
"W. B.",
""
],
[
"Krawczyk",
"F. L.",
""
],
[
"Madrid",
"M. A.",
""
],
[
"Schrage",
"D. L.",
""
],
[
"Waynert",
"J. A.",
""
],
[
"Rusnak",
"B.",
""
]
] |
physics/0008078 | Ulrich Laier | M. Brunken, H. Genz, M. Gopych, H.-D. Graef, S. Khodyachykh, S.
Kostial, U. Laier, A. Lenhardt, H. Loos, J. Muehl, M. Platz, A. Richter, S.
Richter, B. Schweizer, A. Stascheck, O. Titze, S. Watzlawik (TU Darmstadt),
S. Doebert (CERN) | Latest Developments from the S-DALINAC* | 3 pages, 6 figures, LINAC2000, MOC04 | eConf C000821 (2000) MOc04 | null | null | physics.acc-ph | null | The S-DALINAC is a 130 MeV superconducting recirculating electron accelerator
serving several nuclear and radiation physics experiments as well as driving an
infrared free-electron laser. A system of normal conducting rf resonators for
noninvasive beam position and current measurement was established. For the
measurement of gamma-radiation inside the accelerator cave a system of Compton
diodes has been developed and tested. Detailed investigations of the transverse
phasespace were carried out with a tomographical reconstruction method of
optical transition radiation spots. The method can be applied also to
non-Gaussian phasespace distributions. The results are in good accordance with
simulations. To improve the quality factor of the superconducting 3 GHz
cavities, an external 2K testcryostat was commissioned. The influence of
electro-chemical polishing and magnetic shielding is currently under
investigation. A digital rf-feedback-system for the accelerator cavities is
being developed in order to improve the energy spread of the beam of the
S-DALINAC.
* Supported by the BMBF under contract no. 06 DA 820, the DFG under contract
no. Ri 242/12-1 and -2 and the DFG Graduiertenkolleg 'Physik und Technik von
Beschleunigern'
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 09:37:29 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Brunken",
"M.",
"",
"TU Darmstadt"
],
[
"Genz",
"H.",
"",
"TU Darmstadt"
],
[
"Gopych",
"M.",
"",
"TU Darmstadt"
],
[
"Graef",
"H. -D.",
"",
"TU Darmstadt"
],
[
"Khodyachykh",
"S.",
"",
"TU Darmstadt"
],
[
"Kostial",
"S.",
"",
"TU Darmstadt"
],
[
"Laier",
"U.",
"",
"TU Darmstadt"
],
[
"Lenhardt",
"A.",
"",
"TU Darmstadt"
],
[
"Loos",
"H.",
"",
"TU Darmstadt"
],
[
"Muehl",
"J.",
"",
"TU Darmstadt"
],
[
"Platz",
"M.",
"",
"TU Darmstadt"
],
[
"Richter",
"A.",
"",
"TU Darmstadt"
],
[
"Richter",
"S.",
"",
"TU Darmstadt"
],
[
"Schweizer",
"B.",
"",
"TU Darmstadt"
],
[
"Stascheck",
"A.",
"",
"TU Darmstadt"
],
[
"Titze",
"O.",
"",
"TU Darmstadt"
],
[
"Watzlawik",
"S.",
"",
"TU Darmstadt"
],
[
"Doebert",
"S.",
"",
"CERN"
]
] |
physics/0008080 | Deepak Raparia | D. Raparia, A. G. Ruggiero | A Super-Conducting Linac Injector for the BNL-Ags | 3 pages | eConf C000821 (2000) TUD18 | null | null | physics.acc-ph | null | This paper reports on the feasibility study of a proton Super-Conducting
Linac (SCL) as a new injector to the Alternating Gradient Synchrotron (AGS) of
the Brookhaven National Laboratory (BNL). The Linac beam energy is in the range
of 1.5 to 2.4 GeV. The Beam intensity is adjusted to provide an average beam
power of 4 MW at the top energy of 24 GeV. The repetition rate of the SCL-AGS
facility is 5 beam pulses per second.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 10:35:39 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Raparia",
"D.",
""
],
[
"Ruggiero",
"A. G.",
""
]
] |
physics/0008081 | Deepak Raparia | J. Alessi, D. Raparia, A. G. Ruggiero | A Super-Conducting Linac Driver for the HFBR | 3 pages | eConf C000821 (2000) TUD19 | null | null | physics.acc-ph | null | This paper reports on the feasibility study of a proton Super-Conducting
Linac (SCL) as a driver gor the High-Flux Breader Reactor (HFBR) at Brookhaven
National Laboratory (BNL). The Linac operates in Continuos Wave (CW) mode to
produce an average 10 MW of beam power. The Linac energy is 1.0 GeV. The
average proton beam intensity is 10 mA.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 10:56:51 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Alessi",
"J.",
""
],
[
"Raparia",
"D.",
""
],
[
"Ruggiero",
"A. G.",
""
]
] |
physics/0008082 | null | S.I. Bityukov (IHEP, Protvino), N.V. Krasnikov (INR, Moscow), V.A.
Taperechkina (MSA IECS, Serpukhov) | On the Confidence Interval for the parameter of Poisson Distribution | 12 pages (1 LaTeX file), 3 eps files (figures), references to
Sections are corrected | null | null | null | physics.data-an | null | The possibility of construction of continuous analogue of Poisson
distribution with the search of bounds of confidence intervals for parameter of
Poisson distribution is discussed. Also, in the article is shown that the true
value of a parameter of Poisson distribution for the observed value $\hat x$
has Gamma distribution with the scale parameter, which is equal to one, and the
shape parameter, which is equal to $\hat x$. The results of numerical
construction of confidence intervals are presented.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 20:54:23 GMT"
},
{
"version": "v2",
"created": "Sun, 3 Sep 2000 15:59:49 GMT"
},
{
"version": "v3",
"created": "Tue, 12 Sep 2000 12:48:42 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Bityukov",
"S. I.",
"",
"IHEP, Protvino"
],
[
"Krasnikov",
"N. V.",
"",
"INR, Moscow"
],
[
"Taperechkina",
"V. A.",
"",
"MSA IECS, Serpukhov"
]
] |
physics/0008084 | Hitoshi Hayano | H. Hayano (KEK, Tsukuba, Ibaraki, Japan) | Wire Scanners for Small Emittance Beam Measurement in Atf | Linac2000, MOC01 | eConf C000821 (2000) MOc01 | null | null | physics.acc-ph | null | The wire scanners are used for a measurement of the very small beam size and
the emittance in Accelerator Test Facility (ATF). They are installed in the
extraction beam line of ATF damping ring. The extracted beam emittance are
ex=1.3x10-9 m.rad, ey=1.7x10-11 m.rad with 2x109 electrons/bunch intensity and
1.3GeV energy. The wire scanners scan the beam by a tungsten wire with beam
repetition 0.78Hz. The scanning speed is, however, very slow(~500um/sec). Since
the extracted beam is quite stable by using the double kicker system, precision
of the size measurement is less than 2um for 50 - 150um horizontal beam size
and 0.3um for 8 - 16um vertical beam size. The detail of the system and the
performance are described.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 11:58:44 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Hayano",
"H.",
"",
"KEK, Tsukuba, Ibaraki, Japan"
]
] |
physics/0008085 | Mosnier | Alban Mosnier | Energy Stability in a High Intensity Pulsed SC Proton Linac | Linac2000 paper ID No. THB10 reasons for reposting : Figures have
been changed | eConf C000821 (2000) THB10 | null | null | physics.acc-ph | null | Spallation source dedicated for neutron scattering experiments, as well as
multi-purpose facilities serving several applications call for pulsed mode
operation of a high intensity proton linac. There is general agreement on the
superconducting technology for the high-energy part, which offers some
advantages, like higher gradient capabilities or operational costs reduction,
as compared to room-temperatures accelerating structures. This mode of
operation however could spoil the energy stability of the proton beam and needs
thus to be carefully studied. First, transient beam-loading effects, arising
from the large beam phase slippage along a multi-cell cavity and associated
with the finite RF energy propagation, can induce significant energy modulation
with a too small cell-to-cell coupling or a too large number of cells. Second,
due to beam phase slippage effects along the linac, energy spread exhibits a
larger sensitivity to cavity fields fluctuations than relativistic particles. A
computer code, initially developed for electron beams has been extended to
proton beams. It solves the 6xN coupled differential equations, needed to
describe cavity fields and beam-cavity interactions of a high-energy linac
composed of N cavities. Simulation examples on a typical pulsed accelerator are
given with various error sources, like Lorentz forces or microphonics detuning,
beam injection energy offsets, intensity jitters ...
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 12:32:54 GMT"
},
{
"version": "v2",
"created": "Fri, 18 Aug 2000 08:42:36 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Mosnier",
"Alban",
""
]
] |
physics/0008087 | Winfried Barth | W. Barth | Commissioning of the 1.4 Mev/u High Current Heavy Ion Linac at Gsi | Linac 2000, FR201, 5 pages, 8 figures | eConf C000821 (2000) FR201 | null | null | physics.acc-ph | null | The disassembly of the Unilac prestripper linac of the Wideroe type took
place at the beginning of 1999. An increase of more than two orders of
magnitude in particle number for the most heavy elements in the SIS had to be
gained. Since that time the new High Current Injector (HSI) consisting of
H-type RFQ and DTL-structures for dual beam operation was installed and
successfully commissioned. The High Charge Injector (HLI) supplied the main
linac during that time. Simultaneously conditioning and running in of the
rf-transmitters and rf-structures were done. The HSI commissioning strategy
included beam investigation after each transport and acceleration section,
using a versatile diagnostic test stand. Results of the extensive commissioning
measurements (e.g. transverse emittance, bunch width, beam transmission) behind
LEBT, RFQ, Super Lens, IH tank I and II and stripping section will be
discussed. An 40Ar1+ beam coming from a MUCIS ion source was used to fill the
linac up to the theoretical space charge limit. Routine operation started in
November 1999.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 15:55:02 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Barth",
"W.",
""
]
] |
physics/0008088 | Winfried Barth | W. Barth, P. Forck | The New Gas Stripper and Charge State Separator of the Gsi High Current
Injector | Linac 2000, MOD13, 3 pages, 7 figures | eConf C000821 (2000) MOD13 | null | null | physics.acc-ph | null | The GSI Unilac was upgraded as a high current injector for the SIS in 1999.
Therefore, the stripping section [1] at 1.4 MeV/u, where a beam transport under
highest space charge conditions and multi beam operation had to be established,
was completely new designed. Results of the commissioning of the stripper
section will be presented. The beam transport to the new gas stripper, and the
charge state analysis under space charge conditions confirmed the calculations.
A 238U4+ beam - coming from a MEVVA ion source and accelerated by the new
injector linac- was stripped (with the expected stripping efficiency) to the
charge state 28+ and successfully separated by the new spectrometer (15 degree
and 30 degree kicker magnets). The transport and matching to the poststripper
accelerator under highest space charge conditions was investigated with a 15
emA 40Ar10+ beam. Especially space charge and charge state dependent emittance
growth effects in 6d-phase space will be discussed.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 16:06:56 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Barth",
"W.",
""
],
[
"Forck",
"P.",
""
]
] |
physics/0008089 | William T. Roybal | W. T. Roybal, J. Bradley III, D. Rees, P. A. Torrez, D. K. Warner, J.
DeBaca | High-power Circulator Test Results at 350 MHz and 700 MHz | LINAC 2000 Conference Paper # THE06 | eConf C000821 (2000) THE06 | null | null | physics.acc-ph | null | The high-power RF systems for the Accelerator Production of Tritium (APT)
program require high-power circulators at 350 MHz and 700 MHz to protect 1 MW
Continuous Wave (CW) klystrons from reflected power. The 350 MHz circulator is
based on the CERN, ESRF, and APS designs and has performed very well. The 700
MHz circulator is a new design. Prototype 700 MHz circulators have been
high-power tested at Los Alamos National Laboratory (LANL). The first of these
circulators has satisfied performance requirements. The circulator
requirements, results from the testing, and lessons learned from this
development are presented and discussed.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 16:43:17 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Roybal",
"W. T.",
""
],
[
"Bradley",
"J.",
"III"
],
[
"Rees",
"D.",
""
],
[
"Torrez",
"P. A.",
""
],
[
"Warner",
"D. K.",
""
],
[
"DeBaca",
"J.",
""
]
] |
physics/0008090 | Joseph F. Tooker | J.Kuzminski, K.C.D.Chan, R.Gentzlinger, and P. Maccioni | Industrial Fabrication of Medium-Beta SCRF Cavities for a High-Intensity
Proton Linac | THD06, XX International Linac Conference, 3 pages, RF cavity,
superconducting | eConf C000821 (2000) THD06 | null | null | physics.acc-ph | null | During 1999, four 700-MHz, medium-beta (b = 0.64), superconducting radio
frequency (SCRF) cavities for a high-intensity proton linac project at Los
Alamos National Laboratory (LANL) were manufactured by industry. The SCRF
cavities were designed by a LANL team in Los Alamos, New Mexico, USA, and
manufactured at a CERCA plant in Romans, France. The cavities were made of
4-mm-thick, solid niobium sheets with a residual resistivity ratio (RRR)
greater than 250. These niobium sheets were supplied by Wah Chang (USA),
Heraeus AG (Germany), and Tokyo Denkai (Japan). The SCRF cavities were shipped
to LANL for performance testing. This paper describes the experience gained
during the manufacturing process at CERCA.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 17:08:08 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Kuzminski",
"J.",
""
],
[
"Chan",
"K. C. D.",
""
],
[
"Gentzlinger",
"R.",
""
],
[
"Maccioni",
"P.",
""
]
] |
physics/0008091 | Wolfgang F. O. Mueller | P. Huelsmann, W.F.O. Mueller, H. Klein | The Diffraction Model and its Applicability for Wakefield Calculations | Linac2000 conference paper ID No. MOE06 | eConf C000821 (2000) MOE06 | null | null | physics.acc-ph | null | The operation of a Free Electron Laser (FEL) in the ultraviolet or in the
X-ray regime requires the acceleration of electron bunches with an rms length
of 25 to 50 micro meters. The wakefields generated by these sub picosecond
bunches extend into the frequency range well beyond the threshold for Cooper
pair breakup (about 750 GHz) in superconducting niobium at 2 K. It is shown,
that the superconducting cavities can indeed be operated with 25 micro meter
bunches without suffering a breakdown of superconductivity (quench), however at
the price of a reduced quality factor and an increased heat transfer to the
superfluid helium bath. This was first shown by wakefield calculations based on
the diffraction model. In the meantime a more conventional method of computing
wake fields in the time domain by numerical methods was developed and used for
the wakefield calculations. Both methods lead to comparable results: the
operation of TESLA with 25 micro meter bunches is possible but leads to an
additional heat load due to the higher order modes (HOMs). Therefore HOM
dampers for these high frequencies are under construction. These dampers are
located in the beam pipes between the 9-cell cavities. So it is of interest, if
there are trapped modes in the cavity due to closed photon orbits. In this
paper we investigate the existence of trapped modes and the distribution of
heat load over the surface of the TESLA cavity by numerical photon tracking.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 17:30:12 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Huelsmann",
"P.",
""
],
[
"Mueller",
"W. F. O.",
""
],
[
"Klein",
"H.",
""
]
] |
physics/0008093 | Stanley J. Pasky | R. Soliday, S. Pasky, M. Borland | Automated Operation of the APS LINAC using the Procedure Execution
Manager | LINAC 2000, TUC14 | eConf C000821 (2000) TUc14 | null | null | physics.acc-ph | null | The Advanced Photon Source (APS) linear accelerator has two thermionic
cathode rf guns and one photocathode rf gun. The thermionic guns are used
primarily for APS operations while the photocathode gun is used as a
free-electron laser (FEL) driver. With each gun requiring a different lattice
and timing configuration, the need to change quickly between guns puts great
demands on the accelerator operators. Using the Procedure Execution Manager
(PEM), a software environment for managing automated procedures, we have made
start-up and switch-over of the linac systems both easier and more reliable.
The PEM is a graphical user interface written in Tcl/Tk that permits the user
to invoke "machine procedures" and control their execution. It allows
construction of procedures in a hierarchical, parallel fashion, which makes for
efficient execution and development. In this paper, we discuss the features and
advantages of the PEM environment as well the specifics of our procedures for
the APS linac.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 18:26:12 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Soliday",
"R.",
""
],
[
"Pasky",
"S.",
""
],
[
"Borland",
"M.",
""
]
] |
physics/0008094 | Edward Halerewicz Jr. | E. F. Halerewicz Jr | The quantum vacuum, fractal geometry, and the quest for a new theory of
gravity | 20 pages, LaTeX2e, LaTeX errors corrected | null | null | null | physics.gen-ph | null | In this letter recent developments are shown in experimental and theoretical
physics which brings into question the validity of General Relativity. This
letter emphasizes the construction of a fractal 3+\phi^3 spacetime, in
N-dimensions in order to formalize a physical and consistent theory of `quantum
gravity.' It is then shown that a `quantum gravity' effect could arise by means
of the Strong Equivalence Principle. Which is made possible through a pressure
of the form -kappa(R^{ca}_{b}-{1\over 2}g^{c sigma}_{ab}R^c)=kappa T^{c
sigma}_{ab}. Where it is seen that nuclear pressures can be added to rethe
gravitational field equations by means of twistor spaces.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 19:37:37 GMT"
},
{
"version": "v2",
"created": "Tue, 20 Mar 2001 07:49:15 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Halerewicz",
"E. F.",
"Jr"
]
] |
physics/0008097 | Lawrence Rybarcyk | L. J. Rybarcyk, J. D. Schneider, H. V. Smith, L. M. Young and M. E.
Schulze | LEDA Beam Operations Milestone and Observed Beam Transmission
Characteristics | LINAC2000 TUD15, 3 pages, 4 figures, RFQ, LEDA, APT | eConf C000821 (2000) TUD15 | null | null | physics.acc-ph | null | Recently, the Low-Energy Demonstration Accelerator (LEDA) portion of the
Accelerator Production of Tritium (APT) project reached its 100-mA, 8-hr CW
beam operation milestone. LEDA consists of a 75-keV proton injector, 6.7-MeV,
350-MHz CW radio-frequency quadrupole (RFQ) with associated high-power and
low-level rf systems, a short high-energy beam transport (HEBT) and high-power
(670-kW CW) beam dump. During the commissioning phase it was discovered that
the RFQ field level must to be approximately 5-10% higher than design in order
to accelerate the full 100-mA beam with low losses. Measurements of a
low-duty-factor, 100-mA beam show the beam transmission is unexpectedly low for
RFQ field levels between ~90 and 105% of design. This paper will describe some
aspects of LEDA operations critical to achieving the above milestone.
Measurement and simulation results for reduced RFQ beam transmission near
design operating conditions are also presented.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 22:24:06 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Rybarcyk",
"L. J.",
""
],
[
"Schneider",
"J. D.",
""
],
[
"Smith",
"H. V.",
""
],
[
"Young",
"L. M.",
""
],
[
"Schulze",
"M. E.",
""
]
] |
physics/0008098 | Paul Corredoura | P. Corredoura, C. Adolphsen | RF Control System for the NLC Linacs | 3 pages, presented at the 20th International Linac Conference,
Monterey California, August 21-25, 2000 | eConf C000821 (2000) TUc18 | null | SLAC Pub #8571 | physics.acc-ph physics.ins-det | null | The proposed Next Linear Collider contains a large number of linac RF systems
with new requirements for wideband klystron modulation and accurate RF vector
detection. The system will be capable of automatically phasing each klystron
and compensating for beam loading effects. Accelerator structure alignment is
determined by detection of the beam induced dipole modes with a receiver
similar to that used for measuring the accelerator RF and is incorporated into
the RF system topology. This paper describes the proposed system design, signal
processing techniques and includes preliminary test results.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 23:30:30 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Corredoura",
"P.",
""
],
[
"Adolphsen",
"C.",
""
]
] |
physics/0008099 | Scott D. Nelson | Scott D. Nelson, Michael Vella | RF Cell Modeling and Experiments for Wakefield Minimization in DARHT-II | LINAC2000 TUB09 | eConf C000821 (2000) TUB09 | null | null | physics.acc-ph | null | Electron beams of linear induction accelerators experience deflective forces
caused by RF fields building up as a result of accelerating cavities of finite
size. These forces can significantly effect the beam when a long linac composed
of identical cells is assembled. Recent techniques in computational modeling,
simulation, and experiments for 20 MeV DARHT-II (Dual Axis Radiographic
Hydrodynamic Test) accelerator cells were found to reduce the wakefield
impedance of the cells from 800 ohms/meter to 350 ohms/meter and experimental
results confirm the results of the modeling efforts. Increased performance of
the cell was obtained through a parametric study of the accelerator structure,
materials, material tuning, and geometry. As a result of this effort, it was
found that thickness-tuned ferrite produced a 50% deduction in the wakefield
impedance in the low frequency band and was easily tunable based on the
material thickness. It was also found that shaped metal sections allow for
high-Q resonances to be de-tuned, thus decreasing the amplitude of the
resonance and increasing the cell s performance. For the geometries used for
this cell, a roughly 45 degree angle had the best performance in affecting the
wakefield modes.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 01:18:19 GMT"
},
{
"version": "v2",
"created": "Mon, 21 Aug 2000 18:07:28 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Nelson",
"Scott D.",
""
],
[
"Vella",
"Michael",
""
]
] |
physics/0008100 | Viatcheslav M. Pavlov | VEPP-5 Team (Budker INP, Novosibirsk, Russia) | Test of accelerating structure for VEPP-5 preinjector | 3 pages, 5 figures, Linac2000, [3] S.N. Dolya, W.I.Furman, V.V.
Kobets, E.M. Lasiev, Yu.A. Metelkin, V.A. Shvets, A.P. Soumbaev, the VEPP-5
Team, "Linac LUE200. First testing results" (submitted to this conference) | eConf C000821 (2000) TUA21 | null | null | physics.acc-ph | null | Preinjector VEPP-5 electron linac consists of two linear accelerators on
energy 300 MeV and 510 MeV and includes 14 accelerating structures [1]. First
accelerating structures both linacs have increased average rate of acceleration
25-30 MeV/m, and other regular sections up to 17-20 MeV/m. This paper presents
the results of basic test of 3-meter long accelerating structure. Average rate
of acceleration of an electron beam 35 MeV/m was achieved. The electron beam
energy up to 105 MeV was obtained.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 06:08:40 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"5 Team",
"",
""
]
] |
physics/0008102 | Richard Scrivens | C.E. Hill (1), A. Lombardi (1), R. Scrivens (1), M. Vretenar (1), A.
Feschenko (2), A. Liou (2) ((1) CERN, Geneva, Switzerland, (2)INR, Moscow,
Russia.) | Tests of the CERN Proton Linac Performance for LHC-Type Beams | LINAC 2000, TUC14, 3 pages, 5 figures | eConf C000821 (2000) TUD17 | null | null | physics.acc-ph | null | As the pre-injector of the LHC injector chain, the proton linac at CERN is
required to provide a high-intensity (180mA) beam to the Proton Synchrotron
Booster. The results of measurements at this intensity will be presented.
Furthermore, the linac is now equipped with bunch shape monitors from INR,
Moscow, which have allowed the comparison of the Alvarez tank RF settings with
simulations.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 09:26:20 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Hill",
"C. E.",
""
],
[
"Lombardi",
"A.",
""
],
[
"Scrivens",
"R.",
""
],
[
"Vretenar",
"M.",
""
],
[
"Feschenko",
"A.",
""
],
[
"Liou",
"A.",
""
]
] |
physics/0008103 | Peter Forck | P. Forck, F. Heymach, T. Hoffmann, A. Peters, P. Strehl | Measurement of the six Dimensional Phase Space at the New GSI High
Current Linac | LINAC contribution, poster MOC09 | eConf C000821 (2000) MOc09 | null | null | physics.acc-ph | null | For the characterization of the 10 mA ion beam delivered by the new High
Current Linac at GSI, sophisticated, mainly non-intersepting diagnostic devices
were developed. Besides the general set-up of a versatile test bench, we
discuss in particular bunch shape and emittance measurements. A direct
time-of-flight technique with a diamond particle detector is used to observe
the micro-bunch distribution with a resolution of $\sim 25 $ ps equals
0.3$^{o}$ in phase. For the determination of the energy spread a coincidence
technique is applied, using secondary electrons emitted by the ion passing
through an aluminum foil 80 cm upstream of the diamond detector. The transverse
emittance is measured within one macro pulse with a pepper-pot system equipped
with a high performance CCD camera.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 09:29:38 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Forck",
"P.",
""
],
[
"Heymach",
"F.",
""
],
[
"Hoffmann",
"T.",
""
],
[
"Peters",
"A.",
""
],
[
"Strehl",
"P.",
""
]
] |
physics/0008104 | Matthias Liepe | N. Baboi, M. Ferrario, M. Liepe, J. Sekutowicz | Superconducting Superstructure for the TESLA Collider: New Results | for LINAC 2000, 3 pages, 5 figures | eConf C000821 (2000) TUA15 | null | null | physics.acc-ph | null | A new cavity-chain layout has been proposed for the main linac of the TESLA
linear collider. This superstructure-layout is based upon four 7-cell
superconducting standing-wave cavities, coupled by short beam pipes. The main
advantages of the superstructure are an increase in the active accelerating
length in TESLA and a saving in rf components, especially power couplers, as
compared to the present 9-cell cavities. The proposed scheme allows to handle
the field-flatness tuning and the HOM damping at sub-unit level, in contrast to
standard multi-cell cavities. The superstructure-layout is extensively studied
at DESY since 1999. Computations have been performed for the rf properties of
the cavity-chain, the bunch-to-bunch energy spread and multibunch dynamics. A
copper model of the superstructure has been built in order to compare with the
simulations and for testing the field-profile tuning and the HOM damping
scheme. A "proof of principle" niobium prototype of the superstructure is now
under construction and will be tested with beam at the TESLA Test Facility in
2001. In this paper we present latest results of these investigations.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 11:43:46 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Baboi",
"N.",
""
],
[
"Ferrario",
"M.",
""
],
[
"Liepe",
"M.",
""
],
[
"Sekutowicz",
"J.",
""
]
] |
physics/0008105 | Andreas Sauer | A. Sauer, H. Deitinghoff, H. Klein (Institut fuer Angewandte Physik
(IAP) Universitaet Frankfurt am Main) | Beam Dynamics Studies for a High Current Ion Injector | paper for LINAC 2000, id number THB06, beam dynamics simulations,
high current and high intensity beams, matching to RFQ and DTL, emittance
growth, IFMIF | eConf C000821 (2000) THB06 | null | null | physics.acc-ph | null | Recent ion source developments resulted in the generation of high brilliance,
high current beams of protons and light ions. After extraction and transport
the beams with large internal space charge forces have to be captured, bunched
and preaccelerated for the injection into the following driver part of a new
generation of high intensity beam facilities for neutron sources, energy
production, transmutation e.g. A combination of RFQ and DTL is considered to be
a good solution for such a high current ion injector. Some preliminary beam
dynamics layouts have been investigated by multiparticle simulations. Basic
parameters like frequency, ion energy and sparking have been varied for the
International Fusion Material Irradiation Facility (IFMIF) scenario as an
example. The main interest was directed to high transmission, low losses and
emittance conservation. The beam matching to the RFQ is shortly discussed as
well as the matching between RFQ and DTL.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 11:55:21 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Sauer",
"A.",
"",
"Institut fuer Angewandte Physik"
],
[
"Deitinghoff",
"H.",
"",
"Institut fuer Angewandte Physik"
],
[
"Klein",
"H.",
"",
"Institut fuer Angewandte Physik"
]
] |
physics/0008106 | null | M. Pabst, K. Bongardt (Forschungszentrum Juelich GmbH, Germany), A.
Letchford (RAL, Didcot, U.K.) | High Current Beam Dynamics in an Ess SC Linac | LINAC2000 conference contribution, 3 pages, 4 figures | eConf C000821 (2000) THB03 | null | null | physics.acc-ph | null | Three alternative designs of the European Spallation Source (ESS) high energy
linac are described. The most promising ones are either a normalconducting (nc)
coupled cavity linac (CCL) up tofinal energy or a change at 407 MeV to only one
group of 6 cell superconducting (sc) elliptical cavities.
Fully 3d Monte Carlo simulations are presented for both options, optimized
for reduced halo formation at the linac end. For the error free matched case,
especially the halo formation in the longitudinal plane is more pronounced for
the hybrid solution with its superconducting cavities, caused by the
unavoidable phase slippage, but still quite well acceptable for loss free ring
injection. Simulations however for a 30% mismatched dense core, surrounded in
addition by 1.5% halo particles are showing few particles with very large
amplitudes even in real space. This case represents halo formation in front to
end simulations, caused by current fluctuations, filamented RFQ output
distribution and enhanced by accumulated field errors.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 13:18:54 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Pabst",
"M.",
"",
"Forschungszentrum Juelich GmbH, Germany"
],
[
"Bongardt",
"K.",
"",
"Forschungszentrum Juelich GmbH, Germany"
],
[
"Letchford",
"A.",
"",
"RAL, Didcot, U.K."
]
] |
physics/0008107 | Joseph F. Tooker | G. Spalek, D.W. Christiansen, P.D.Smith, P.T. Greninger, and C.M.
Charman | Studies of Coupled Cavity Linac (CCL) Accelerating Structures with 3-D
Codes | THD18, XX INternational Linac Conference, 3 pages, APT, CCL, 3D | eConf C000821 (2000) THD18 | null | null | physics.acc-ph | null | The cw CCL being designed for the Accelerator Production of Tritium (APT)
project accelerates protons from 96MeV to 211MeV. It consists of 99 segments
each containing up to seven accelerating cavities. Segments are coupled by
intersegment coupling cavities and grouped into supermodules. The design method
needs to address not only basic cavity sizing for a given coupling and pi/2
mode frequency, but also the effects of high power densities on the cavity
frequency, mechanical stresses, and the structure's stop band during operation.
On the APT project, 3-D RF (Ansoft Corp.'s HFSS) and coupled RF/structural
(Ansys Inc.'s ANSYS) codes are being used to develop tools to address the above
issues and guide cooling channel design. The code's predictions are being
checked against available low power Aluminum models. Stop band behavior under
power will be checked once the tools are extended to CCDTL structures that have
been tested at high power. A summary of calculations made to date and agreement
with measured results will be presented.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 13:57:19 GMT"
},
{
"version": "v2",
"created": "Thu, 17 Aug 2000 23:46:55 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Spalek",
"G.",
""
],
[
"Christiansen",
"D. W.",
""
],
[
"Smith",
"P. D.",
""
],
[
"Greninger",
"P. T.",
""
],
[
"Charman",
"C. M.",
""
]
] |
physics/0008109 | Anatoly Krasnykh | Anatoly Krasnykh | Analyses of klystron modulator approaches for NLC | 3 pages, 6 figures, THA15, to be submitted at XX International Linac
Conference, LINAC2000, Monterey, CA | eConf C000821 (2000) THA15 | null | SLAC-PUB-8564 | physics.acc-ph | null | Analyze of experimental results shows that the energy discharge efficiency of
the modern modulators is 0.92-0.93. The energy transfer efficiency can be
reached up to 0.7 for 1.5 usec pulse width and up to 0.8 for 3.0 usec
accordingly. The geometry and core material of the transformer is one element
of modulator, which limits the efficiency due to limitation if transmission
band of the pulse power. Ways of the rise of energy transfer efficiency had
been discussed. The use of features of coupled transmission lines lies in the
base of an idea how the energy transfer efficiency can be improved up to 0.85
in the frame of the conventional approach. In the second part of the paper the
transformerless modulator approaches are presented upon a modified Marx method
of voltage multiplication using on/off IGBT instead of on switches.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 15:10:44 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Krasnykh",
"Anatoly",
""
]
] |
physics/0008110 | Winfried Barth | J. Glatz, J. Klabunde, U. Scheeler, D. Wilms | Operational Aspects of the High Current Upgrade at the Unilac | Linac 2000, MOD12, 3 pages, 5 figures | eConf C000821 (2000) MOD12 | null | null | physics.acc-ph | null | With the new GSI High Current Injector, the beam pulse intensity will be
increased by more than two orders of magnitude. The high beam power and the
short stopping range at particle energies below 12 MeV/u can destroy
accelerator components even during a single beam pulse. Therefore, the
operation of the whole accelerator facility has required major changes in
hardware, software and operating strategy. A sophisticated beam diagnostic
system is indispensable for a safe operation. Preferably non-destructive
devices were installed. Destructive elements, e.g. beam stoppers, slits,
apertures, were improved in order to withstand the high beam power. Automatic
damage prevention was realised by beam loss monitors comparing and evaluating
very fast beam current transformer signals. Additionally, the component status
will be controlled permanently. For foil stripping at 11.4 MeV/u, a magnetic
beam sweeping system was installed Thereby, the hit area will be increased
during one 100 micro sec pulse. During operation, manual variation of
parameters has to be reduced. Set-up and automatic beam adjustment procedures
have to exclude uncontrolled beam loss. The versatility of the UNILAC is
enhanced by the possible three-beam operation on a pulse-to-pulse basis. Since
November 1999 the upgraded UNILAC is serving the experiments.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 15:20:28 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Glatz",
"J.",
""
],
[
"Klabunde",
"J.",
""
],
[
"Scheeler",
"U.",
""
],
[
"Wilms",
"D.",
""
]
] |
physics/0008111 | Dario Villani | Dario Villani and Andrei E. Ruckestein | Looking Forward to Pricing Options from Binomial Trees | 12 pages, 1 figure | null | null | null | physics.gen-ph cond-mat | null | We reconsider the valuation of barrier options by means of binomial trees
from a "forward looking" prospective rather than the more conventional
"backward induction" one used by standard approaches. This reformulation allows
us to write closed-form expressions for the value of European and American put
barrier-options on a non-dividend-paying stock.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 16:16:38 GMT"
},
{
"version": "v2",
"created": "Mon, 21 Aug 2000 18:36:39 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Villani",
"Dario",
""
],
[
"Ruckestein",
"Andrei E.",
""
]
] |
physics/0008113 | Amy H. Regan | Amy Regan, Sung-il Kwon, Tony S. Rohlev, Yi-Ming Wang, Mark S. Prokop,
David W. Thomson | Design of the SNS Normal Conducting Linac RF Control System | TUC17 | eConf C000821 (2000) TUc17 | null | null | physics.acc-ph | null | The Spallation Neutron Source (SNS) is being designed for operation in 2004.
The SNS is a 1 GeV machine consisting of a combination normal-conducting and
super-conducting linac as well as a ring and target area. The linac front end
is a 402.5 MHz RFQ being developed by Lawrence Berkeley Lab. The DTL (at 402.5
MHz) and the CCL (at 805 MHz) stages are being developed by Los Alamos National
Laboratory. The expected output energy of the DTL is 87 MeV and that of the CCL
is 185 MeV. The RF control system under development for the linac is based on
the Low Energy Demonstration Accelerator (LEDA) control system with some new
features. This paper will discuss the new design approach and its benefits.
Block diagrams and circuit specifics will be addressed. The normal conducting
RF control system will be described in detail with references to the
super-conducting control system where appropriate.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 15:53:13 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Regan",
"Amy",
""
],
[
"Kwon",
"Sung-il",
""
],
[
"Rohlev",
"Tony S.",
""
],
[
"Wang",
"Yi-Ming",
""
],
[
"Prokop",
"Mark S.",
""
],
[
"Thomson",
"David W.",
""
]
] |
physics/0008114 | Michael Borland | Michael Borland, John Lewellen, Steve Milton (ANL) | A Highly Flexible Bunch Compressor for the APS LEUTL FEL | LINAC2000 THC05 3 pages 1 figure | eConf C000821 (2000) THc05 | null | null | physics.acc-ph | null | The LEUTL FEL at the APS has achieved gain at 530 nm with peak beam current
\~100 A. In an effort to push to 120 nm and beyond, we have designed and are
commissioning a bunch compressor to increase the peak current to 600 A or more.
The bunch compressor uses a four-dipole chicane at an energy of 100 to 210 MeV.
To provide options for control of emittance growth due to coherent synchrotron
radiation (CSR), the chicane has variable R56. The central pair of dipoles is
movable, accommodating variable R56 with less concern about emittance dilution
from nonuniformity of the dipole field. The symmetry of the chicane is also
variable via longitudinal motion of the final dipole, which is predicted to
have an effect on emittance growth. Following the chicane, a three-screen
emittance measurement system should permit resolution of the difference in
emittance growth between various chicane configurations. A vertical bending
magnet analysis line is present to permit imaging of correlations between
transverse and energy coordinates. This paper reviews the features and expected
performance of the chicane. A companion paper discusses the physics design in
detail.
Work supported by the U.S. Department of Energy, Office of Basic Energy
Sciences, under Contract No. W-31-109-ENG-38.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 15:55:38 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Borland",
"Michael",
"",
"ANL"
],
[
"Lewellen",
"John",
"",
"ANL"
],
[
"Milton",
"Steve",
"",
"ANL"
]
] |
physics/0008115 | Feschenko | A.V.Feschenko, V.A.Moiseev | Space Charge Effects in Bunch Shape Monitors | Report for the Linac2000 conf., MOC13, 3 pages, 8 figures | eConf C000821 (2000) MOc13 | null | null | physics.acc-ph | null | The operation and parameters of Bunch Shape Monitors using coherent
transformation of time structure of an analyzed beam into a spatial one of low
energy secondary electrons emitted from a wire target is influenced by the
characteristics of a beam under study. The electromagnetic field of a bunch
disturbs the trajectories of secondary electrons, thus resulting in a
degradation of phase resolution and in errors of phase reading. Another effect
is the perturbation of the target potential due to the current in the wire
induced by a bunch as well as due to current compensating emission of the
secondary electrons. The methods, the models and the results of simulations are
presented.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 16:02:46 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Feschenko",
"A. V.",
""
],
[
"Moiseev",
"V. A.",
""
]
] |
physics/0008116 | Michael Borland | Nicholas Sereno, Michael Borland, Alex Lumpkin (ANL) | Use of Coherent Transition Radiation to Set Up the APS RF Thermionic Gun
to Produce High-Brightness Beams for SASE FEL Experiments | LINAC2000 MOB17 3 pages 8 figures | eConf C000821 (2000) MOB17 | null | null | physics.acc-ph | null | We describe use of the Advanced Photon Source (APS) rf thermionic gun, alpha
magnet beamline, and linac to produce a stable high-brightness beam in excess
of 100 amperes peak current with normalized emittance of 10 pi mm-mrad. To
obtain peak currents greater than 100 amperes, the rf gun system must be tuned
to produce a FWHM bunch length on the order of 350 fs. Bunch lengths this short
are measured using coherent transition radiation (CTR) produced when the rf gun
beam, accelerated to 40 MeV, strikes a metal foil. The CTR is detected using a
Golay detector attached to one arm of a Michelson interferometer. The alpha
magnet current and gun rf phase are adjusted so as to maximize the CTR signal
at the Golay detector, which corresponds to the minimum bunch length. The
interferometer is used to measure the autocorrelation of the CTR radiation. The
minimum phase approximation is used to derive the bunch profile from the
autocorrelation. The high-brightness beam is accelerated to 217 MeV and used to
produce SASE in five APS undulators installed in the Low- Energy Undulator Test
Line (LEUTL) experiment hall. Initial optical measurements showed a gain length
of 1.3 m at 530 nm. * Work supported by U. S. Department of Energy, Office of
Basic Energy Sciences, under Contract No. W-31-109-ENG-38.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 16:03:52 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Sereno",
"Nicholas",
"",
"ANL"
],
[
"Borland",
"Michael",
"",
"ANL"
],
[
"Lumpkin",
"Alex",
"",
"ANL"
]
] |
physics/0008118 | Yu-Jiuan Chen | Yu-Jiuan Chen and Arthur C. Paul | Physics Design Considerations of Diagnostic X Beam Transport System | 3 pages, 0 figures, LINAC 2000, TBU20 | eConf C000821 (2000) TUB20 | null | null | physics.acc-ph | null | Diagnostic X (D-X) transport system would extract the beam from the
downstream transport line of the second- axis of the Dual Axis Radiographic
Hydrodynamic Test facility (DARHT-II) and transport this beam to the D-X firing
point via four branches of the beamline in order to provide four lines of sight
for x-ray radiography. The design goal is to generate four DARHT-II-like x-ray
pulses on each line of sight. In this paper, we discuss several potential beam
quality degradation processes in the passive magnet lattice beamline and
indicate how they constrain the D-X beamline design parameters, such as the
background pressure, the pipe size, and the pipe material
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 17:36:17 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Chen",
"Yu-Jiuan",
""
],
[
"Paul",
"Arthur C.",
""
]
] |
physics/0008119 | Yu-Jiuan Chen | Yu-Jiuan Chen, Darwin D.-M. Ho, James F. Mccarrick, Arthur C. Paul,
Stephen Sampayan, Li-Fang Wang, John T. Weir | Physics Design of the ETA-II/Snowtron Double Pulse Target Experiment | 3 pages, 4 figures, LINAC 2000, TBU19 | eConf C000821 (2000) TUB19 | null | null | physics.acc-ph | null | We have modified the single pulse target experimental facility[ ] on the
Experimental Test Accelerator II (ETA-II) to perform the double pulse target
experiments to validate the DARHT-II[, ] multi-pulse target concept. The 1.15
MeV, 2 kA Snowtron injector will provide the first electron pulse. The 6 MeV, 2
kA ETA-II beam will be used as the probe beam. Our modeling indicates that the
ETA-II/Snowtron experiment is a reasonable scaling experiment.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 17:44:59 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Chen",
"Yu-Jiuan",
""
],
[
"Ho",
"Darwin D. -M.",
""
],
[
"Mccarrick",
"James F.",
""
],
[
"Paul",
"Arthur C.",
""
],
[
"Sampayan",
"Stephen",
""
],
[
"Wang",
"Li-Fang",
""
],
[
"Weir",
"John T.",
""
]
] |
physics/0008120 | Michael G. Mazarakis | M. G. Mazarakis, R. B. Spielman, K. W. Struve, F. W. Long | A New Linear Inductive Voltage Adder Driver for the Saturn Accelerator | 3 pages, 4 figures. This paper is submitted for the 20th Linear
Accelerator Conference LINAC2000, Monterey, CA | eConf C000821 (2000) TUc05 | null | null | physics.acc-ph | null | Saturn is a dual-purpose accelerator. It can be operated as a large-area
flash x-ray source for simulation testing or as a Z-pinch driver especially for
K-line x-ray production. In the first mode, the accelerator is fitted with
three concentric-ring 2-MV electron diodes, while in the Z-pinch mode the
current of all the modules is combined via a post-hole convolute arrangement
and driven through a cylindrical array of very fine wires. We present here a
point design for a new Saturn class driver based on a number of linear
inductive voltage adders connected in parallel. A technology recently
implemented at the Institute of High Current Electronics in Tomsk (Russia) is
being utilized[1].
In the present design we eliminate Marx generators and pulse-forming
networks. Each inductive voltage adder cavity is directly fed by a number of
fast 100-kV small-size capacitors arranged in a circular array around each
accelerating gap. The number of capacitors connected in parallel to each cavity
defines the total maximum current. By selecting low inductance switches,
voltage pulses as short as 30-50-ns FWHM can be directly achieved.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 18:04:23 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Mazarakis",
"M. G.",
""
],
[
"Spielman",
"R. B.",
""
],
[
"Struve",
"K. W.",
""
],
[
"Long",
"F. W.",
""
]
] |
physics/0008122 | Terry L. Smith | T.L. Smith, M.H. Cho, A.E. Grelick, G. Pile, A. Nassiri, N. Arnold | RF System Upgrades to the Advanced Photon Source Linear Accelerator in
Support of the Fel Operation | LC 2000 (3 pages, 6 figures) | eConf C000821 (2000) THc10 | null | null | physics.acc-ph | null | The S-band linear accelerator, which was built to be the source of particles
and the front end of the Advanced Photon Source injector, is now also being
used to support a low-energy undulator test line (LEUTL) and to drive a
free-electron laser (FEL). The more severe rf stability requirements of the FEL
have resulted in an effort to identify sources of phase and amplitude
instability and implement corresponding upgrades to the rf generation chain and
the measurement system. Test data and improvements implemented and planned are
described
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 18:46:56 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Smith",
"T. L.",
""
],
[
"Cho",
"M. H.",
""
],
[
"Grelick",
"A. E.",
""
],
[
"Pile",
"G.",
""
],
[
"Nassiri",
"A.",
""
],
[
"Arnold",
"N.",
""
]
] |
physics/0008125 | William A. Reass | William A. Reass, James D. Doss, Robert F. Gribble, Michael T. Lynch,
and Paul J. Tallerico | Progress on the 140 KV, 10 Megawatt Peak, 1 Megawatt Average Polyphase
Quasi-Resonant Bridge, Boost Converter/Modulator for the Spallation Neutron
Source (SNS) Klystron Power System | THE11 | eConf C000821 (2000) THE11 | null | LAUR 00 3748 | physics.acc-ph | null | This paper describes electrical design and operational characteristics of a
zero-voltage-switching 20 kHz polyphase bridge, boost converter/modulator for
klystron pulse application. The DC-DC converter derives the buss voltages from
a standard 13.8 kV to 2300 Y substation cast-core transformer. Energy storage
and filtering is provided by self-clearing metallized hazy polypropylene
traction capacitors. Three "H-Bridge" IGBT switching networks are used to
generate the polyphase 20 kHz transformers primary drive waveforms. The 20 kHz
drive waveforms are chirped the appropriate duration to generate the desired
klystron pulse width. PWM (pulse width modulation) of the individual 20 kHz
pulses is utilized to provide regulated output waveforms with adaptive
feedforward and feedback techniques. The boost transformer design utilizes
amorphous nanocrystalline material that provides the required low core loss at
design flux levels and switching frequencies. Resonant shunt peaking is used on
the transformer secondary to boost output voltage and resonate transformer
leakage inductance. With the appropriate transformer leakage inductance and
peaking capacitance, zero-voltage-switching of the IGBT's is attained,
minimizing switching losses. A review of these design parameters and a
comparison of computer calculations, scale model, and first article results
will be performed.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 21:30:43 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Reass",
"William A.",
""
],
[
"Doss",
"James D.",
""
],
[
"Gribble",
"Robert F.",
""
],
[
"Lynch",
"Michael T.",
""
],
[
"Tallerico",
"Paul J.",
""
]
] |
physics/0008128 | Daniel Schulte | D. Schulte | Simulation of an Intra-Pulse Interaction Point Feedback for Future
Linear Colliders | LINAC2000 Conference, Paper ID MOA02 | eConf C000821 (2000) MOA02 | null | CERN/PS 2000-051 (AE) | physics.acc-ph | null | In future normal-conducting linear colliders, the beams will be delivered in
short bursts with a length of the order of 100 ns. The pulses will be separated
by several ms. In order to maintain high luminosity, feedback is necessary on a
pulse-to-pulse basis. In addition, intra-pulse feedback that can correct beam
positions and angles within one pulse seem technically feasible. The likely
performances of different feedback options are simulated for the NLC (Next
Linear Collider) and CLIC (Compact Linear Collider).
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 07:18:06 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Schulte",
"D.",
""
]
] |
physics/0008130 | Roberto Corsini | R. Corsini, A. Ferrari, J.P. Potier, L. Rinolfi, T. Risselada, P.
Royer (CERN, Switzerland) | A Low Charge Demonstration of Electron Pulse Compression for the CLIC RF
Power Source | 3 pages, 5 figures, submitted to the LINAC 2000 Conference | eConf C000821 (2000) MOA05 | null | null | physics.acc-ph | null | The CLIC (Compact Linear Collider) RF power source is based on a new scheme
of electron pulse compression and bunch frequency multiplication using
injection by transverse RF deflectors into an isochronous ring. In this paper,
we describe the modifications needed in the present LEP Pre-Injector (LPI)
complex at CERN in order to perform a low-charge test of the scheme. The design
of the injector (including the new thermionic gun), of the modified linac, of
the matched injection line, and of the isochronous ring lattice, are presented.
The results of preliminary isochronicity measurements made on the present
installation are also discussed.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 07:24:26 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Corsini",
"R.",
"",
"CERN, Switzerland"
],
[
"Ferrari",
"A.",
"",
"CERN, Switzerland"
],
[
"Potier",
"J. P.",
"",
"CERN, Switzerland"
],
[
"Rinolfi",
"L.",
"",
"CERN, Switzerland"
],
[
"Risselada",
"T.",
"",
"CERN, Switzerland"
],
[
"Royer",
"P.",
"",
"CERN, Switzerland"
]
] |
physics/0008132 | Daniel Schulte | D. Schulte, I. Syratchev | Beam Loading Compensation in the Main Linac of CLIC | LINAC 2000, paper ID MOA04 | eConf C000821 (2000) MOA04 | null | CERN/PS 2000-050 (AE) | physics.acc-ph | null | Compensation of multi-bunch beam loading is of great importance in the main
linac of the Compact Linear Collider (CLIC). The bunch-to-bunch energy
variation has to stay below 1 part in 1000. In CLIC, the RF power is obtained
by decelerating a drive beam which is formed by merging a number of short bunch
trains. A promising scheme for tackling beam loading in the main linac is based
on varying the lengths of the bunch trains in the drive beam. The scheme and
its expected performance are presented.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 07:51:40 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Schulte",
"D.",
""
],
[
"Syratchev",
"I.",
""
]
] |
physics/0008133 | Takayuki Imai | T. Imai (1), K. Nakai (1), H. Hayano (2), J. Urakawa (2), N. Terunuma
(2) ((1) Science University of Tokyo, (2) KEK, Ibaraki, Japan) | Double Kicker system in ATF | Linac 2000 proceeding MOA16 | eConf C000821 (2000) MOA16 | null | null | physics.acc-ph | null | A double kicker system which extracts the ultra-low emittance multi-bunch
beam stably from ATF damping ring was developed. The performance of the system
was studied comparing an orbit jitter with single kicker extraction in single
bunch mode. The position jitter reduction was estimated from the analysis of
the extraction orbits. The reduction was confirmed for the double kicker system
within a resolution of BPMs. More precise tuning of the system with a wire
scanner has been tried by changing a beta function at the second kicker to get
more reduction of kick angle jitter. The results of these studies are described
in detail.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 07:52:18 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Imai",
"T.",
"",
"Science University of Tokyo"
],
[
"Nakai",
"K.",
"",
"Science University of Tokyo"
],
[
"Hayano",
"H.",
"",
"KEK, Ibaraki, Japan"
],
[
"Urakawa",
"J.",
"",
"KEK, Ibaraki, Japan"
],
[
"Terunuma",
"N.",
"",
"KEK, Ibaraki, Japan"
]
] |
physics/0008135 | Gerald Hutter | G. Hutter, W. Gutowski, W. Hartmann, G. Kube, M. Pilz, W. Vinzenz | The RF-System of the New Gsi High Current Linac Hsithe RF-System of the
New Gsi High Current Linac Hsi | Linac Contribution Poster THE05 | eConf C000821 (2000) THE05 | null | null | physics.acc-ph | null | The RF part of the new high current injector-linac HSI consists of five
cavities with the new operating frequency of 36 MHz instead of 27 MHz of the
removed Wideroe type injector. The calculated power requirements of the
cavities including beam load in three structures were between 110 kW for a
rebuncher and 1.75 MW pulse-power for the two IH-cavities. The beam load is up
to 150 kW for the RFQ and up to 750 kW for the two drift tube tanks. An
additional 36 MHz debuncher in the transfer line to the Synchrotron (SIS) will
need 120 kW pulse power. We decided to fulfil these demands with amplifiers of
only two power classes, namely three amplifiers with 2 MW and six amplifiers
with 200 kW pulse output power. The latter ones are also used as drivers for
the 2 MW stages. The 200 kW amplifiers were specified in detail by GSI and
ordered in the industry. The three 2 MW final amplifiers were designed,
constructed and built by GSI. The paper gives an overview of the complete RF
system and the operating performance of amplitude and phase control with beam
load. It further describes some specialities of the new 2 MW amplifiers like
the simplicity of the anode circuit, a very sophisticated socket for a cathode
driven amplifier with cathode on dc ground, the parasitic mode-suppression,
shielding and filtering of unallowable RF-radiation and operating experience
since October 1999.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 08:48:53 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Hutter",
"G.",
""
],
[
"Gutowski",
"W.",
""
],
[
"Hartmann",
"W.",
""
],
[
"Kube",
"G.",
""
],
[
"Pilz",
"M.",
""
],
[
"Vinzenz",
"W.",
""
]
] |
physics/0008136 | Winfried Barth | W. Barth, P. Forck, J. Glatz, W. Gutowski, G. Hutter, J. Klabunde, R.
Schwedhelm, P. Strehl, W. Vinzenz, D. Wilms, U. Ratzinger | Commissioning of Ih-RFQ and Ih-DTL for the Gsi High Current Linac | Linac 2000, MOD11, 3 pages, 4 figures | eConf C000821 (2000) MOD11 | null | null | physics.acc-ph | null | The new 1.4 MeV/u front end HSI (HochStromInjektor) of the Unilac accelerates
ions with A/q ratios of up to 65 and with beam intensities in emA of up to 0.25
A/q. The maximum beam pulse power is up to 1300 kW. During the stepwise linac
commissioning from April to Septem-ber 1999 the beam behind of each cavity was
analysed within two weeks. A very stable Ar1+ beam out of a vol-ume plasma
source MUCIS was used mainly. The meas-ured norm. 80 % emittance areas around
0.45 pi mm mrad are close to the results from beam simulations. Up to 80 % of
the design intensity at the linac exit were achieved. In February 2000 an U4+
beam from the MEVVA source was accelerated for the first time.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 09:05:16 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Barth",
"W.",
""
],
[
"Forck",
"P.",
""
],
[
"Glatz",
"J.",
""
],
[
"Gutowski",
"W.",
""
],
[
"Hutter",
"G.",
""
],
[
"Klabunde",
"J.",
""
],
[
"Schwedhelm",
"R.",
""
],
[
"Strehl",
"P.",
""
],
[
"Vinzenz",
"W.",
""
],
[
"Wilms",
"D.",
""
],
[
"Ratzinger",
"U.",
""
]
] |
physics/0008137 | Painchault | M Painchault, J Gaiffier, C Chauvin | Main steps for the fabrication of IPHI RFQ | 3 pages, 4 figures | eConf C000821 (2000) THD03 | null | null | physics.acc-ph | null | The RFQ of the project IPHI is a 8 meter long, high power, very precise
tolerances (0.01 mm on 1 meter long for example) device to accelerate protons.
This RFQ is similar to the RFQ of the LEDA project. So, we realize a thermal
and mechanical studies followed by different tests for machining and brazing
copper. We describe in this paper those different steps and the way we proceed
to supply the fabrication itself by an independent company.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 09:17:27 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Painchault",
"M",
""
],
[
"Gaiffier",
"J",
""
],
[
"Chauvin",
"C",
""
]
] |
physics/0008139 | Arup Banerjee | Arup Banerjee and Manoj K. Harbola | Frequency dependent hyperpolarizabilities of atoms; calculations using
density-functional theory | 13 pages of text and 7 figures | null | null | null | physics.atom-ph | null | Using the orbitals generated by the van Leeuwen-Baerends potential, we
calculate frequency dependent response properties of noble gas atoms of He, Ne
and Ar and alkaline earth atoms Be and Mg, with particlar emphasis on their
nonlinear polarizabilities. For this we employ time-dependent Kohn-Sham
formalism with adiabatic local-density aproximation (ALDA) for exchange and
correlation. We show that results thus obtained for frequency dependent
polarizabilities of the inert gas atoms are highly acurate. On the other hand,
polarizabilities of the alkaline earths are not given with the same accuracy.
In light of this, we make an assessment of ALDA for obtaining linear and
nonlinear response properties by employing time-dependent density-functional
theory.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 10:11:17 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Banerjee",
"Arup",
""
],
[
"Harbola",
"Manoj K.",
""
]
] |
physics/0008140 | Jang-Min Han | J.M. Han, et al | A 3.0mev Komac/KTF RFQ Linac | 6 figures inline of text, higher resolution or color version of all
figures seperately listed as jpg files. Linac 2000 Conference Paper ID No.
TUD01 | eConf C000821 (2000) TUD01 | null | null | physics.acc-ph | null | The Radio-Frequency Quadrupole (RFQ) linac that will accelerate a 20mA proton
beam from 50keV to 3MeV has been designed and is being fabricated as the first
phase, KOMAC Test Facility (KTF), of the Korea Multipurpose Accelerator Complex
(KOMAC) project at the Korea Atomic Energy Research Institute (KAERI). The
physical, engineering designs and fabrication status of the RFQ are described.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 10:56:33 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Han",
"J. M.",
""
]
] |
physics/0008142 | Maurizio Vretenar | M. Vretenar (for the SPL Study Group) | A High-Intensity H- Linac at CERN Based on LEP-2 Cavities | Linac2000, paper TU206 | eConf C000821 (2000) TU206 | null | TU206 | physics.acc-ph | null | In view of a possible evolution of the CERN accelerator complex towards
higher proton intensities, a 2.2 GeV H- linac with 4 MW beam power has been
designed, for use in connection with an accumulator and compressor ring as
proton driver of a muon-based Neutrino Factory. The high-energy part of this
linac can use most of the RF equipment (superconducting cavities and klystrons)
from the LEP collider after its decommissioning at the end of 2000. Recent
results concerning low-beta superconducting cavities are presented, and the
main characteristics of the linac design are described. The complete
linac-based proton driver facility is outlined, and the impact on the linac
design of the requirements specific to a Neutrino Factory is underlined.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 11:50:04 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Vretenar",
"M.",
"",
"for the SPL Study Group"
]
] |
physics/0008143 | Raphael Gobin | R. Gobin, P-Y. Beauvais, O. Delferriere, R. Ferdinand, F. Harrault,
J-M. Lagniel | An ECR hydrogen negative ion source at CEA/Saclay: preliminary results | 3 pages, 3 figures, LINAC 2000 MOD07 | eConf C000821 (2000) MOD07 | null | null | physics.acc-ph | null | The development of a high intensity negative ion source is part of a
considerably larger activity presently undergoing at CEA Saclay in the field of
high intensity linear accelerators. Preliminary studies toward the construction
of a 2.45 GHz ECR H- ion source have been performed for few months. This new
test bench takes advantage of our experience on the French high intensity
proton source SILHI. In the new source, the high-energy electrons created in
the ECR zone are trapped by a dipole magnetic filter. A rectangular 200 mm long
plasma chamber and an intermediate iron shield are used to minimize the
magnetic field in the extraction region. A second magnetic filter separates
electrons and negative ions in a 10 kV extraction system. To reduce the
electron/H- ratio, the plasma electrode is slightly polarized. The design
allows future evolutions such as cesium injection, higher energy extraction and
plasma diagnostics. The installation of the source is now in progress. The
first helium plasma has been produced for few weeks to verify the electron
separator behavior. The design, computations and the first results of the
source are presented.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 13:00:21 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Gobin",
"R.",
""
],
[
"Beauvais",
"P-Y.",
""
],
[
"Delferriere",
"O.",
""
],
[
"Ferdinand",
"R.",
""
],
[
"Harrault",
"F.",
""
],
[
"Lagniel",
"J-M.",
""
]
] |
physics/0008144 | Robin Ferdinand | R. Duperrier, R. Ferdinand, P. Gros, J-M. Lagniel, N. Pichoff, D.
Uriot, CEA-Saclay, DSM-DAPNIA-SEA | Design of the Ess RFQs and Chopping Line | 3 pages, LINAC 2000, TUD03 | eConf C000821 (2000) TUD03 | null | null | physics.acc-ph | null | The chopping line is a critical part of the ESS linac in term of technical
realisation of the choppers and preservation of the beam qualities. A new
optimised design of the ESS RFQs and chopping lines is reported. The beam
dynamics has been optimised with H- beam currents up to 100-mA to have safety
margin with respect to the ESS goals. The first RFQ transmits almost 99.7% of
the beam up to 2 MeV. The line with two choppers allows a perfect chopping
between 2 bunches. The second RFQ accelerates the particles up to 5 MeV with a
transmission close to 100%.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 14:02:38 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Duperrier",
"R.",
""
],
[
"Ferdinand",
"R.",
""
],
[
"Gros",
"P.",
""
],
[
"Lagniel",
"J-M.",
""
],
[
"Pichoff",
"N.",
""
],
[
"Uriot",
"D.",
""
],
[
"CEA-Saclay",
"",
""
],
[
"DSM-DAPNIA-SEA",
"",
""
]
] |
physics/0008145 | Robin Ferdinand | R. Ferdinand, P-Y. Beauvais, R. Duperrier, A. France, J. Gaiffier,
J-M. Lagniel, M. Painchault, F. Simoens, CEA-Saclay, DSM-DAPNIA-SEA, P.
Balleyguier, CEA-Bruyeres le Chatel, DAM | Status Report on the 5 Mev Iphi RFQ | 3 pages, LINAC 2000 | eConf C000821 (2000) TUD04 | null | null | physics.acc-ph | null | A 5-MeV RFQ designed for a proton current up to 100-mA CW is now under
construction as part of the High Intensity Proton Injector project (IPHI). Its
computed transmission is greater than 99 %. The main goals of the project are
to verify the accuracy of the design codes, to gain the know-how on
fabrication, tuning procedures and operations, to measure the output beam
characteristics in order to optimise the higher energy part of the linac, and
to reach a high availability with minimum beam trips. A cold model has been
built to develop the tuning procedure. The present status of the IPHI RFQ is
presented.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 14:13:16 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Ferdinand",
"R.",
""
],
[
"Beauvais",
"P-Y.",
""
],
[
"Duperrier",
"R.",
""
],
[
"France",
"A.",
""
],
[
"Gaiffier",
"J.",
""
],
[
"Lagniel",
"J-M.",
""
],
[
"Painchault",
"M.",
""
],
[
"Simoens",
"F.",
""
],
[
"CEA-Saclay",
"",
""
],
[
"DSM-DAPNIA-SEA",
"",
""
],
[
"Balleyguier",
"P.",
""
],
[
"Chatel",
"CEA-Bruyeres le",
""
],
[
"DAM",
"",
""
]
] |
physics/0008147 | Carlo Rossi | G. D'Auria, C. Rossi, M. Danailov, M. Ferrario, N. Piovella, L.
Serafini | The FaBrE Project at Trieste | LINAC2000 poster MOB07, 3 pages, 4 figures | eConf C000821 (2000) MOB07 | null | null | physics.acc-ph | null | A program to design a high brilliance electron source suitable for a short
wavelength Linac-based FEL is presented. The goal of the project is to develop
a multi-cell integrated photoinjector capable of delivering 1 nC bunches with
emittance below 1 mm mrad. This will be the first step toward a possible
development of a IV generation light source test facility based on the existing
Trieste Linac. For this purpose a common program between Sincrotrone Trieste
and INFN-Milano has been undertaken. Here a brief description of the program
and the first results of the RF Gun electromagnetic structure with the beam
dynamics on the ELETTRA Linac are presented.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 14:40:02 GMT"
},
{
"version": "v2",
"created": "Tue, 22 Aug 2000 23:06:50 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"D'Auria",
"G.",
""
],
[
"Rossi",
"C.",
""
],
[
"Danailov",
"M.",
""
],
[
"Ferrario",
"M.",
""
],
[
"Piovella",
"N.",
""
],
[
"Serafini",
"L.",
""
]
] |
physics/0008148 | Bernhard Schlitt | B. Schlitt, A. Bechtold, U. Ratzinger, A. Schempp | Design of the 7 MeV/u, 217 MHz Injector Linac for the Proposed Ion Beam
Facility for Cancer Therapy at the Clinic in Heidelberg | Contribution to the LINAC2000 Proceedings, Paper ID: MOD10 | eConf C000821 (2000) MOD10 | null | null | physics.acc-ph | null | A dedicated clinical synchrotron facility for cancer therapy using energetic
proton and ion beams (C, He and O) has been designed at GSI for the
Radiologische Universitaetsklinik at Heidelberg, Germany. The design of the
injector linac is presented. Suitable ion sources are discussed and results of
ion source test measurements are reported. The LEBT allows for switching
between two ion sources. A short RFQ accelerates the ions from 8 keV/u to 400
keV/u. It is followed by a very compact beam matching section and a 3.8 m long
IH-type drift tube linac for the acceleration to 7 MeV/u. Both rf structures
are designed for a resonance frequency of 216.816 MHz and for ion
mass-to-charge ratios up to A/q = 3 (12C4+, (H_3)+, 3He+, 16O6+).
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 14:48:07 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Schlitt",
"B.",
""
],
[
"Bechtold",
"A.",
""
],
[
"Ratzinger",
"U.",
""
],
[
"Schempp",
"A.",
""
]
] |
physics/0008150 | C. Vermare | C. Vermare, D. C. Moir and G. J. Seitz | Optical Transition Radiation (OTR) Measurements of an Intense Pulsed
Electron Beam | 3 pages, 7 figures | eConf C000821 (2000) MOc16 | null | LA-UR-00-2064 | physics.acc-ph physics.ins-det | null | We present the first time resolved OTR angular distribution measurements of
an intense pulsed electron beam (1.7 kA, 60 ns). These initial experiments on
the first axis of the Dual Axis Radiographic Hydro-Testing (DARHT) facility and
subsequent analysis, demonstrate the possibility to extract, from the data, the
energy and the divergence angle of a 3.8 and 20 MeV electrons.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 15:25:07 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Vermare",
"C.",
""
],
[
"Moir",
"D. C.",
""
],
[
"Seitz",
"G. J.",
""
]
] |
physics/0008151 | Jong-Seok Oh | J. S. Oh, J. S. Bak, M. H. Cho, W. Namkung (PAL, Korea) K. H. Chung
(SNU, Korea) T. Shintake, H. Matsumoto(KEK, Japan) | Development of a Smart Modulator and Efficiency Evaluation of 500-GeV
e+e- C-Band Linear Collider | 3 pages, 4 figures, Linac2000 paper ID No. THA12 file= THA12.pdf | eConf C000821 (2000) THA12 | null | null | physics.acc-ph | null | An e+e- linear collider at 500-GeV C.M. (center of mass) has been proposed as
a future accelerator. The C-band linear collider has more than a thousand
klystrons and matching modulators. The linear colliders require smart
modulators with high reliability, compact and simple configuration, and good
power efficiency. This study suggests solutions to problems expected in the
future linear colliders. A C-band smart modulator has been developed using a
constant-current inverter power supply. The smart modulator provides 350-kV
pulses of the pulse-to-pulse stability of 0.35%, the pulse-width of 4.35
microseconds, and the repetition rate of 50 Hz. We also investigated the power
efficiency for the C-band scheme. A pulse efficiency of 75% can be achieved by
an optimized pulse transformer and the RF phase modulation. With pulsed
klystrons of 60% power efficiency, it is possible to achieve the RF system
efficiency of 32% with the wall-plug power of 170 MW.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 15:33:14 GMT"
}
] | 2007-05-23T00:00:00 | [
[
"Oh",
"J. S.",
"",
"PAL, Korea"
],
[
"Bak",
"J. S.",
"",
"PAL, Korea"
],
[
"Cho",
"M. H.",
"",
"PAL, Korea"
],
[
"Namkung",
"W.",
"",
"PAL, Korea"
],
[
"Chung",
"K. H.",
"",
"SNU, Korea"
],
[
"Shintake",
"T.",
"",
"KEK, Japan"
],
[
"Matsumoto",
"H.",
"",
"KEK, Japan"
]
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.