id
string | submitter
string | authors
string | title
string | comments
string | journal-ref
string | doi
string | report-no
string | categories
string | license
string | abstract
string | versions
list | update_date
timestamp[s] | authors_parsed
list |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
physics/0008034 | Kuriki Masao | M. Kuriki (1), H. Hayano (1), T. Naito (1), T. Okugi (1),V. Vogel (2)
((1) KEK, (2)BINP) | Energy stabilization of 1.5 GeV S-Band linac | Submission for LINAC 2000, THA11 | eConf C000821 (2000) THA11 | null | null | physics.acc-ph | null | KEK-ATF is studying low emittance, multi-bunch electron beam for the future
linear collider. The energy instability of the 1.5 GeV linac has been a problem
making the beam injection to the damping ring unstable. Because the unstable
beam generates also large amount of the radiation, the beam current is limited
by the KEK radiation safety policy much lower than what we expect. Stabilizing
the S-band linac is therefore important not only to improve the beam quality,
but also to clear the radiation safety limit to start the multi-bunch
operation.
We have made various modifications to solve the problem on the electron gun,
modulator, klystron etc. For the modulator, we have developed a feed-forward
controlled De-Q module. This module compensates the voltage jitter by
controlling the deQ timing with a feed-forward circuit because the amount of
the excessive charge up is strongly correlated to the charge up slope that can
be measured prior to the deQ timing. The energy stability was examined and was
improved by a factor of 3, from 0.6% to 0.2% of itself. Modification for the
feed-forward circuit to get more stability was made. The test for the new
circuit is in progress. For the long term instability, phase-lock system for
klystron RF is being installed. In the test operation, it showed a good
performance and compensate the phase drift less than 1 deg.
| [
{
"version": "v1",
"created": "Fri, 11 Aug 2000 10:52:16 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Kuriki",
"M.",
"",
"KEK"
],
[
"Hayano",
"H.",
"",
"KEK"
],
[
"Naito",
"T.",
"",
"KEK"
],
[
"Okugi",
"T.",
"",
"KEK"
],
[
"Vogel",
"V.",
"",
"BINP"
]
]
|
physics/0008035 | Sung-Ju Park | S. J. Park, J. S. Oh, J. S. Bak, M. H. Cho, W. Namkung (Pohang
Accelerator Laboratory, POSTECH, Pohang, Korea) | 2.856-GHz Modulation of Conventional Triode Electron Gun | 3 pages including 7 figures; To be submitted to the LINAC2000
conference, Paper No. MOB18; Minor changes in grammer | eConf C000821 (2000) MOB18 | null | null | physics.acc-ph | null | For the generation of picosecond (< 100 ps) electron beam pulses, we studied
the RF modulation of a conventional triode electron gun. The feasibility study
for this scheme has been experimentally investigated by modulating a triode gun
of the Y-824 cathode-grid (KG) structure provided by the CPI Eimac, with
2.856-GHz pulsed RF generated by a solid-state amplifier (SSA). In this paper,
we present the methods and results of this investigation.
| [
{
"version": "v1",
"created": "Fri, 11 Aug 2000 13:44:27 GMT"
},
{
"version": "v2",
"created": "Mon, 14 Aug 2000 02:37:52 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Park",
"S. J.",
"",
"Pohang\n Accelerator Laboratory, POSTECH, Pohang, Korea"
],
[
"Oh",
"J. S.",
"",
"Pohang\n Accelerator Laboratory, POSTECH, Pohang, Korea"
],
[
"Bak",
"J. S.",
"",
"Pohang\n Accelerator Laboratory, POSTECH, Pohang, Korea"
],
[
"Cho",
"M. H.",
"",
"Pohang\n Accelerator Laboratory, POSTECH, Pohang, Korea"
],
[
"Namkung",
"W.",
"",
"Pohang\n Accelerator Laboratory, POSTECH, Pohang, Korea"
]
]
|
physics/0008037 | Roger A. Richardson | Roger A. Richardson, Stephen Sampayan, John T. Weir | Elliptical X-Ray Spot Measurement | Postscript file, for LINAC2000 conference | eConf C000821 (2000) MOc07 | null | null | physics.ins-det | null | The so-called roll bar measurement uses a heavy metal material, optically
thick to x-rays, to form a shadow of the x-ray origination spot. This spot is
where an energetic electron beam interacts with a high Z target. The material
(the "roll bar") is slightly curved to avoid alignment problems. The roll bar
is constructed and positioned so that the x-rays are shadowed in the horizontal
and vertical directions, so information is obtained in two dimensions. If a
beam profile is assumed (or measured by other means), the equivalent x-ray spot
size can be calculated from the x-ray shadow cast by the roll bar. Thus the
ellipticity of the beam can be calculated, assuming the ellipse of the x-ray
spot is aligned with the roll bar. The data is recorded using a scintillator
and gated camera. Data will be presented from measurements using the ETA II
induction LINAC. The accuracy of the measurement is checked using small
elliptical targets.
| [
{
"version": "v1",
"created": "Fri, 11 Aug 2000 17:40:19 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Richardson",
"Roger A.",
""
],
[
"Sampayan",
"Stephen",
""
],
[
"Weir",
"John T.",
""
]
]
|
physics/0008038 | Shuichi Okuda | S. Okuda, T. Yamamoto, S. Suemine, G. Isoyama | High-intensity single-bunch electron beam generation with the 38 MeV
L-band linac in Osaka University | paper for linac2000 ID: MOB20 | eConf C000821 (2000) MOB20 | null | null | physics.acc-ph | null | The characteristics of the high-intensity single-bunch electron beam of the
38 MeV L-band electron linac at the Institute of Scientific and Industrial
Research in Osaka University were investigated.
| [
{
"version": "v1",
"created": "Sat, 12 Aug 2000 05:22:23 GMT"
},
{
"version": "v2",
"created": "Thu, 31 Aug 2000 05:23:06 GMT"
},
{
"version": "v3",
"created": "Tue, 19 Sep 2000 03:50:39 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Okuda",
"S.",
""
],
[
"Yamamoto",
"T.",
""
],
[
"Suemine",
"S.",
""
],
[
"Isoyama",
"G.",
""
]
]
|
physics/0008040 | Shigeki Fukuda | S. Fukuda, A. Anami, C. Kubota, M. Kawamura, S. Yamaguchi, M. Ono, H.
Nakanishi, S. Miyake, M. Sakamoto | The RF source of the 60-MeV Linac for the KEK/JAERI Joint Project | 3 pages, 3 figures, conference | eConf C000821 (2000) THE02 | null | null | physics.acc-ph | null | The construction of the 60-MeV proton linac has started as a low-energy front
of the KEK/JAERI Joint Project for a high-intensity proton accelerator facility
at KEK. The accelerating frequency is 324 MHz. Five UHF klystrons are used as
an rf source; their ratings have a maximum power of 3 MW, a beam pulse width of
a 700 micro-sec (an rf pulse width is 650 micro-sec) and a repetition rate of
50 pps. We have manufactured a proto-type rf source (a power-supply system with
a modulating-anode pulse modulator and prototype klystrons). In this paper, the
specifications and developments of the rf source, including the WR-2300
waveguide system, are summarized. During the manufacturing process, strong
oscillations due to back-going electrons from the collector were observed. This
phenomenon was analyzed both experimentally and theoretically. We have tested
up to an output power of nearly 3 MW, and succeeded to test the DTL hot-model
structure.
| [
{
"version": "v1",
"created": "Sat, 12 Aug 2000 09:33:33 GMT"
},
{
"version": "v2",
"created": "Thu, 17 Aug 2000 06:39:52 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Fukuda",
"S.",
""
],
[
"Anami",
"A.",
""
],
[
"Kubota",
"C.",
""
],
[
"Kawamura",
"M.",
""
],
[
"Yamaguchi",
"S.",
""
],
[
"Ono",
"M.",
""
],
[
"Nakanishi",
"H.",
""
],
[
"Miyake",
"S.",
""
],
[
"Sakamoto",
"M.",
""
]
]
|
physics/0008042 | Don Edwards | D. Edwards, H. Edwards, N. Holtkamp, S. Nagaitsev, J. Santucci, R.
Brinkmann, K. Desler, K. Floettmann, I. Bohnet, M. Ferrario | The Flat Beam Experiment at the FNAL Photoinjector | Linac2000 conf paper, 3 pages and 4 figures | eConf C000821 (2000) THc13 | null | null | physics.acc-ph | null | A technique for production of an electron beam with a high transverse
emittance ratio. a "flat" beam, has been proposed by Brinkmann, Derbenev, and
Floettmann.[1] The cathode of an RF-laser gun is immersed in a solenoidal
magnetic field; as a result the beam emitted from a round laser spot has a net
angular momentum. Subsequent passage through a quadrupole channel that has a 90
degree difference in phase advance between the transverse degrees of freedom
results in a flat beam. Experimental study is underway at the Fermilab A0
Photoinjector. Thus far, transverse emittance ratios as high as 50 have been
observed, and the results are in substantial agreement with simulation.
[1] R. Brinkmann, Ya. Derbenev, K. Floettmann, "A Flat Beam Electron Source
for Linear Colliders." TESLA Note 99-09, April 1999.
| [
{
"version": "v1",
"created": "Sat, 12 Aug 2000 18:13:32 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Edwards",
"D.",
""
],
[
"Edwards",
"H.",
""
],
[
"Holtkamp",
"N.",
""
],
[
"Nagaitsev",
"S.",
""
],
[
"Santucci",
"J.",
""
],
[
"Brinkmann",
"R.",
""
],
[
"Desler",
"K.",
""
],
[
"Floettmann",
"K.",
""
],
[
"Bohnet",
"I.",
""
],
[
"Ferrario",
"M.",
""
]
]
|
physics/0008043 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Multiscale Analysis of RMS Envelope Dynamics | 3 pages, 1 figure, JAC2000.cls, presented at LINAC 2000, paper MOE14 | eConf C000821 (2000) MOE14 | null | null | physics.acc-ph math-ph math.MP nlin.CD physics.comp-ph | null | We present applications of variational -- wavelet approach to different forms
of nonlinear (rational) rms envelope equations. We have the representation for
beam bunch oscillations as a multiresolution (multiscales) expansion in the
base of compactly supported wavelet bases.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 11:13:19 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
]
|
physics/0008044 | Yoshihisa Iwashita | Y. Iwashita | DFQ--Double Frequency RFQ | Linac200 oral poster MOE20, PS file, MSWORD 5.1a | eConf C000821 (2000) MOE20 | null | null | physics.acc-ph | null | RFQ with a harmonic higher order quadrupole mode is studied. Assuming that we
superpose a higher order mode with twice the frequency of the fundamental mode,
a sawtooth waveform is approximated. In such a case, the bunching function is
enhanced while the transverse stability is modified. Second order longitudinal
harmonic component is also required to enable the effect.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 13:30:32 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Iwashita",
"Y.",
""
]
]
|
physics/0008045 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Multiresolution Representation for Orbital Dynamics in Multipolar Fields | 3 pages, 3 figures, JAC2000.cls, Proc. European Particle Accelerator
Conf., EPAC00, Vienna, 2000 | null | null | null | physics.acc-ph math-ph math.MP nlin.PS physics.comp-ph | null | We present the applications of variation -- wavelet analysis to
polynomial/rational approximations for orbital motion in transverse plane for a
single particle in a circular magnetic lattice in case when we take into
account multipolar expansion up to an arbitrary finite number and additional
kick terms. We reduce initial dynamical problem to the finite number (equal to
the number of n-poles) of standard algebraical problems. We have the solution
as a multiresolution (multiscales) expansion in the base of compactly supported
wavelet basis.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 15:39:10 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
]
|
physics/0008046 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Nonlinear Beam Dynamics and Effects of Wigglers | 3 pages, 3 figures, JAC2000.cls, Proc. European Particle Accelerator
Conf., EPAC00, Vienna, 2000 | null | null | null | physics.acc-ph math-ph math.MP nlin.AO physics.comp-ph | null | We present the applications of variational--wavelet approach for the
analytical/numerical treatment of the effects of insertion devices on beam
dynamics. We investigate the dynamical models which have polynomial
nonlinearities and variable coefficients. We construct the corresponding
wavelet representation for wigglers and undulator magnets.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 15:53:54 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
]
|
physics/0008047 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Spin-Orbital Motion: Symmetry and Dynamics | 3 pages, 4 figures, JAC2000.cls, Proc. European Particle Accelerator
Conf., EPAC00, Vienna, 2000 | null | null | null | physics.acc-ph math-ph math.MP nlin.PS physics.comp-ph | null | We present the applications of variational--wavelet approach to nonlinear
(rational) model for spin-orbital motion: orbital dynamics and Thomas-BMT
equations for classical spin vector. We represent the solution of this
dynamical system in framework of periodical wavelets via variational approach
and multiresolution.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 16:11:25 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
]
|
physics/0008048 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Local Analysis of Nonlinear RMS Envelope Dynamics | 3 pages, 4 figures, JAC2000.cls, Proc. European Particle Accelerator
Conf., EPAC00, Vienna, 2000 | null | null | null | physics.acc-ph math-ph math.MP nlin.AO physics.comp-ph | null | We present applications of variational -- wavelet approach to nonlinear
(rational) rms envelope dynamics. We have the solution as a multiresolution
(multiscales) expansion in the base of compactly supported wavelet basis.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 16:25:49 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
]
|
physics/0008049 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Multiscale Representations for Solutions of Vlasov-Maxwell Equations for
Intense Beam Propagation | 3 pages, 3 figures, JAC2000.cls, Proc. European Particle Accelerator
Conf., EPAC00, Vienna, 2000 | null | null | null | physics.acc-ph math-ph math.MP nlin.PS physics.comp-ph | null | We present the applications of variational--wavelet approach for computing
multiresolution/multiscale representation for solution of some approximations
of Vlasov-Maxwell equations.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 17:09:10 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
]
|
physics/0008050 | Michael Zeitlin | Antonina N. Fedorova, Michael G. Zeitlin | Quasiclassical Calculations in Beam Dynamics | 3 pages, 2 figures, JAC2000.cls, Proc. European Particle Accelerator
Conf., EPAC00, Vienna, 2000 | null | null | null | physics.acc-ph math-ph math.MP nlin.PS physics.comp-ph | null | We present some applications of general harmonic/wavelet analysis approach
(generalized coherent states, wavelet packets) to numerical/analytical
calculations in (nonlinear) quasiclassical/quantum beam dynamics problems.
(Naive) deformation quantization, multiresolution representations and Wigner
transform are the key points.
| [
{
"version": "v1",
"created": "Sun, 13 Aug 2000 17:18:40 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
]
|
physics/0008052 | Erk Jensen | G. Carron, E. Jensen, M. Luong, A. Millich, E. Rugo, I. Syratchev, L.
Thorndahl | Design of a 3 GHz Accelerator Structure for the CLIC Test Facility (CTF
3) Drive Beam | Contribution to Linac 2000 Conference, TUA16 (Poster) | eConf C000821 (2000) TUA16 | null | null | physics.acc-ph | null | For the CLIC two-beam scheme, a high-current, long-pulse drive beam is
required for RF power generation. Taking advantage of the 3 GHz klystrons
available at the LEP injector once LEP stops, a 180 MeV electron accelerator is
being constructed for a nominal beam current of 3.5 A and 1.5 microsecond pulse
length. The high current requires highly effective suppression of dipolar
wakes. Two concepts are investigated for the accelerating structure design: the
"Tapered Damped Structure" developed for the CLIC main beam, and the "Slotted
Iris - Constant Aperture" structure. Both use 4 SiC loads per cell for
effective higher-order mode damping. A full-size prototype of the TDS structure
has been built and tested successfully at full power. A first prototype of the
SICA structure is being built.
| [
{
"version": "v1",
"created": "Mon, 14 Aug 2000 11:36:51 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Carron",
"G.",
""
],
[
"Jensen",
"E.",
""
],
[
"Luong",
"M.",
""
],
[
"Millich",
"A.",
""
],
[
"Rugo",
"E.",
""
],
[
"Syratchev",
"I.",
""
],
[
"Thorndahl",
"L.",
""
]
]
|
physics/0008055 | Holger Zimmermann | H. Zimmermann | Funneling with the Two-Beam RFQ | 3 pages, 11 figures | eConf C000821 (2000) THB02 | null | IAP03082000 | physics.acc-ph | null | New high current accelerator facilities like proposed for HIDIF or ESS
require a beam with a high brilliance. These beams can not be produced by a
single pass rf-linac. The increase in brightness in such a driver linac is done
by several funneling stages at low energies, in which two identically bunched
ion beams are combined into a single beam with twice the frequency current and
brightness. Our Two-Beam-RFQ funneling experiment is a setup of two ion
sources, a two beam RFQ, a funnel deflector and beam diagnostic equipment to
demonstrate funneling of ion beams as a model for the first funneling stage of
a HIIF driver. The progress of the funneling experiment and results of
simulations will be presented.
| [
{
"version": "v1",
"created": "Mon, 14 Aug 2000 17:48:34 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Zimmermann",
"H.",
""
]
]
|
physics/0008057 | Arthur C. Paul | Arthur C. Paul | Reconstruction of Initial Beam Conditions at the Exit of the DARHT II
Accelerator | 3 pages, 3 figures, LINAC2000 paper TUB10 | eConf C000821 (2000) TUB10 | null | null | physics.acc-ph | null | We consider a technique to determine the initial beam conditions of the DARHT
II Accelerator by measuring the beam size under three different magnetic
transport settings. This may be time gated to resolve the parameters as a
function of time within the 2000 nsec pulse. This technique leads to three
equations in three unknowns with solution giving the accelerator exit beam
radius, tilt and emittance. We find that systematic errors cancel and so are
not a problem in unfolding the initial beam conditions. Random uncorrelated
shot to shot errors can be managed by one of three strategies: 1) make the
transport system optically de-magnifying; 2) average over many individual
shots; or 3) make the random uncorrelated shot to shot errors sufficiently
small. The high power of the DARHT II beam requires that the beam transport
system leading to a radius measuring apparatus be optically magnifying. This
means that the shot to shot random errors must either be made small (less than
about 1%) or that we average each of the three beam radius determinations over
many individual shots.
| [
{
"version": "v1",
"created": "Mon, 14 Aug 2000 18:44:07 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Paul",
"Arthur C.",
""
]
]
|
physics/0008058 | Denis V. Juriev | Denis V. Juriev | Quantum string field theory and psychophysics | null | null | null | null | physics.gen-ph | null | The quantum string field theoretic structure of interactive phenomena is
discussed
| [
{
"version": "v1",
"created": "Mon, 14 Aug 2000 20:47:37 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Juriev",
"Denis V.",
""
]
]
|
physics/0008059 | Glen Westenskow | G. A. Westenskow, L. R. Bertolini, P.T. Duffy, A. C. Paul | The Mechanical Design for the Darht-II Downstream Beam Transport Line | 3 pages, 4 figures, LINAC2000, TUB16 | eConf C000821 (2000) TUB16 | null | null | physics.acc-ph | null | This paper describes the mechanical design of the downstream beam transport
line for the second axis of the Dual Axis Radiographic Hydrodynamic Test (DARHT
II) Facility. The DARHT-II project is a collaboration between LANL, LBNL and
LLNL. DARHT II is a 20-MeV, 2000-Amperes, 2-msec linear induction accelerator
designed to generate short bursts of x-rays for the purpose of radiographing
dense objects. The down-stream beam transport line is approximately 20-meter
long region extending from the end of the accelerator to the bremsstrahlung
target. Within this proposed transport line there are 15 conventional solenoid,
quadrupole and dipole magnets; as well as several speciality magnets, which
transport and focus the beam to the target and to the beam dumps. There are two
high power beam dumps, which are designed to absorb 80-kJ per pulse during
accelerator start-up and operation. Aspects of the mechanical design of these
elements are presented.
| [
{
"version": "v1",
"created": "Mon, 14 Aug 2000 21:32:18 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Westenskow",
"G. A.",
""
],
[
"Bertolini",
"L. R.",
""
],
[
"Duffy",
"P. T.",
""
],
[
"Paul",
"A. C.",
""
]
]
|
physics/0008060 | Hyun-Kyung Chung | H.-K. Chung, K. Kirby, and J. F. Babb | Theoretical study of the absorption spectra of the sodium dimer | 19 pages, 8 figures, revtex, epsf | Physical Review A. Vol. 63 032516 (2001) | 10.1103/PhysRevA.63.032516 | null | physics.atom-ph physics.chem-ph | null | Absorption of radiation from the sodium dimer molecular states correlating to
Na(3s)-Na(3s) is investigated theoretically. Vibrational bound and continuum
transitions from the singlet X Sigma-g+ state to the first excited singlet A
Sigma-u+ and singlet B Pi-u states and from the triplet a Sigma-u+ state to the
first excited triplet b Sigma-g+ and triplet c Pi-g states are studied
quantum-mechanically. Theoretical and experimental data are used to
characterize the molecular properties taking advantage of knowledge recently
obtained from ab initio calculations, spectroscopy, and ultra-cold atom
collision studies. The quantum-mechanical calculations are carried out for
temperatures in the range from 500 to 3000 K and are compared with previous
calculations and measurements where available.
| [
{
"version": "v1",
"created": "Mon, 14 Aug 2000 23:29:32 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Chung",
"H. -K.",
""
],
[
"Kirby",
"K.",
""
],
[
"Babb",
"J. F.",
""
]
]
|
physics/0008066 | Dr. Ralf Eichhorn | R. Eichhorn and U. Ratzinger | Superconducting H-mode Structures for Medium Energy Beams | Linac 2000 Contribution. Poster THD10 | eConf C000821 (2000) THD10 | null | null | physics.acc-ph | null | Room temperature IH-type drift tube structures are used at different places
now for the acceleration of ions with mass over charge ratios up to 65 and
velocities between 0.016 c and 0.1 c. These structures have a high shunt
impedance and allow the acceleration of very intense beams at high accelerating
gradients. The overall power consumption of room temperature IH-mode structures
is comparable with superconducting (sc) structures up to 2 MeV/u. With the
KONUS [1] beam dynamics, the required transversal focusing elements, e.g.
quadrupole triplets can be placed outside of multicell cavities, which is
favourable for building sc H-mode cavities. The design principles and
consequences to the geometry compared to room temperature (rt) cavities will be
described. The results gained from numerical simulations show that a sc
multi-gap H21(0)-mode cavity (CH-type) can be an alternative to the sc
spoke-type or reentrant cavity structures up to beam energies around 150 MeV/u.
The main cavity parameters and possible fabrication options will be discussed.
[1] U. Ratzinger, Nucl. Intr. Meth., A 415 (1998) 229.
| [
{
"version": "v1",
"created": "Tue, 15 Aug 2000 11:24:17 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Eichhorn",
"R.",
""
],
[
"Ratzinger",
"U.",
""
]
]
|
physics/0008069 | Daniel E. Rees | D. Rees, W. Roybal, J. Bradley | Collector Failures on 350 MHz, 1.2 MW CW Klystrons at the Low Energy
Demonstration Accelerator (LEDA) | LINAC2000 conference paper THE12 | eConf C000821 (2000) THE12 | null | null | physics.acc-ph | null | We are currently operating the front end of the accelerator production of
tritium (APT) accelerator, a 7 MeV radio frequency quadrapole (RFQ) using
three, 1.2 MW CW klystrons. These klystrons are required and designed to
dissipate the full beam power in the collector. The klystrons have less than
1500 operational hours. One collector has failed and all collectors are
damaged. This paper will discuss the damage and the difficulties in diagnosing
the cause. The collector did not critically fail. Tube operation was still
possible and the klystron operated up to 70% of full beam power with excellent
vacuum. The indication that finally led us to the collector failure was
variable emission. This information will be discussed. A hydrophonic system was
implemented to diagnose collector heating. The collectors are designed to allow
for mixed-phase cooling and with the hydrophonic test equipment we are able to
observe: normal, single-phase cooling, mixed-phase cooling, and a hard boil.
These data will be presented. The worst case beam profile from a collector
heating standpoint is presented. The paper will also discuss the steps taken to
halt the collector damage on the remaining 350 MHz klystrons and design changes
that are being implemented to correct the problem.
| [
{
"version": "v1",
"created": "Tue, 15 Aug 2000 13:06:36 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Rees",
"D.",
""
],
[
"Roybal",
"W.",
""
],
[
"Bradley",
"J.",
""
]
]
|
physics/0008070 | Michael T. Lynch | Michael Lynch, William Reass, Daniel Rees, Amy Regan, Paul Tallerico | The Spallation Neutron Source (SNS) Linac RF System | 3 pages, submission THE01 for LINAC 2000 conference, Monterey, Aug.
21-25, 2000 | eConf C000821 (2000) THE01 | null | null | physics.acc-ph | null | The SNS linac accelerates an average beam current of 2 mA to an energy of 968
MeV. The linac is pulsed at 60 Hz with an H- beam pulse of 1 ms. The first 185
Mev of the linac uses normal conducting cavities, and the remaining length of
the linac uses superconducting cavities. The linac operates at 402.5 MHz up to
87 MeV and then changes to 805 MHz for the remainder. This paper gives an
overview of the Linac RF system. The overview includes a description and
configuration of the high power RF components, the HV converter/modulator, and
the RF controls. Issues and tradeoffs in the RF system will be discussed,
especially with regards to the use of pulsed superconducting cavities.
| [
{
"version": "v1",
"created": "Tue, 15 Aug 2000 13:49:05 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Lynch",
"Michael",
""
],
[
"Reass",
"William",
""
],
[
"Rees",
"Daniel",
""
],
[
"Regan",
"Amy",
""
],
[
"Tallerico",
"Paul",
""
]
]
|
physics/0008073 | Peter D. Smith | Peter D. Smith | CCT, a Code to Automate the Design of Coupled Cavities | Linac 2000, paper THB14, 3 pages, 3 figures | eConf C000821 (2000) THB14 | null | null | physics.acc-ph | null | The CCT (Coupled Cavity Tuning) code automates the RF calculations and sizing
of RF cavities for the CCL (Coupled Cavity Linac) structures of APT. It is
planned to extend the code to the CCDTL (Coupled Cavity Drift Tube Linac). The
CCT code controls the CCLFISH code, a member of the Poisson Superfish series of
codes [1]. CCLFISH performs RF calculations and tunes the geometry of
individual cavities, including an accelerating cavity (AC) and a coupling
cavity (CC). CCT also relates the AC and CC by means of equations that describe
the coupling slot between cavities. These equations account for the direct
coupling, the next nearest neighbor coupling between adjacent AC's, and the
frequency shifts in the AC and CC caused by the slot. Given design objectives
of a coupling coefficient k, the pi/2 mode frequency, and the net frequency of
the CC, the CCT code iterates to solve for the geometry of the AC and CC and
the separation distance between them (this controls the slot size), satisfying
the design objectives. The resulting geometry is used to automate CAD drawing
preparation. The code can also be used in "as-designed" mode to calculate the
frequencies and coupling of a specified configuration. An overview of the code
is presented.
| [
{
"version": "v1",
"created": "Tue, 15 Aug 2000 19:33:23 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Smith",
"Peter D.",
""
]
]
|
physics/0008074 | K. C. Dominic Chan | E. N. Schmierer, K. C. D. Chan, D. C. Gautier, J. G. Gioia, W. B.
Haynes, F. L. Krawczyk, M. A. Madrid, D. L. Schrage, J. A. Waynert, B. Rusnak | High-Power Testing of the APT Power Coupler | LINAC2000 THD16 | eConf C000821 (2000) THD16 | null | null | physics.acc-ph | null | For the baseline APT (Accelerator Production of Tritium) linac design, power
couplers are required to transmit 210-kW of CW RF power to the superconducting
cavities. These APT couplers operate at 700 MHz, have a coaxial design and an
adjustable coupling to the superconducting cavities. Since May 1999, we have
been testing couplers of this design on a room-temperature test stand. We
completed tests at transmitted-power and reflected-power conditions up to 1 MW.
We also tested the couplers with a portion of the outer conductor cooled by
liquid nitrogen. Under this latter condition, we studied the effects of
condensed gases on coupler performance. The results of these tests indicate
that the APT couplers are capable of delivering more than 500 kW to the
cavities. We are in the process of increasing the baseline coupler design
requirement to 420 kW of transmitted power to take advantage of this successful
development. In this paper, we describe the results of our high-power coupler
tests.
| [
{
"version": "v1",
"created": "Tue, 15 Aug 2000 23:06:26 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Schmierer",
"E. N.",
""
],
[
"Chan",
"K. C. D.",
""
],
[
"Gautier",
"D. C.",
""
],
[
"Gioia",
"J. G.",
""
],
[
"Haynes",
"W. B.",
""
],
[
"Krawczyk",
"F. L.",
""
],
[
"Madrid",
"M. A.",
""
],
[
"Schrage",
"D. L.",
""
],
[
"Waynert",
"J. A.",
""
],
[
"Rusnak",
"B.",
""
]
]
|
physics/0008078 | Ulrich Laier | M. Brunken, H. Genz, M. Gopych, H.-D. Graef, S. Khodyachykh, S.
Kostial, U. Laier, A. Lenhardt, H. Loos, J. Muehl, M. Platz, A. Richter, S.
Richter, B. Schweizer, A. Stascheck, O. Titze, S. Watzlawik (TU Darmstadt),
S. Doebert (CERN) | Latest Developments from the S-DALINAC* | 3 pages, 6 figures, LINAC2000, MOC04 | eConf C000821 (2000) MOc04 | null | null | physics.acc-ph | null | The S-DALINAC is a 130 MeV superconducting recirculating electron accelerator
serving several nuclear and radiation physics experiments as well as driving an
infrared free-electron laser. A system of normal conducting rf resonators for
noninvasive beam position and current measurement was established. For the
measurement of gamma-radiation inside the accelerator cave a system of Compton
diodes has been developed and tested. Detailed investigations of the transverse
phasespace were carried out with a tomographical reconstruction method of
optical transition radiation spots. The method can be applied also to
non-Gaussian phasespace distributions. The results are in good accordance with
simulations. To improve the quality factor of the superconducting 3 GHz
cavities, an external 2K testcryostat was commissioned. The influence of
electro-chemical polishing and magnetic shielding is currently under
investigation. A digital rf-feedback-system for the accelerator cavities is
being developed in order to improve the energy spread of the beam of the
S-DALINAC.
* Supported by the BMBF under contract no. 06 DA 820, the DFG under contract
no. Ri 242/12-1 and -2 and the DFG Graduiertenkolleg 'Physik und Technik von
Beschleunigern'
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 09:37:29 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Brunken",
"M.",
"",
"TU Darmstadt"
],
[
"Genz",
"H.",
"",
"TU Darmstadt"
],
[
"Gopych",
"M.",
"",
"TU Darmstadt"
],
[
"Graef",
"H. -D.",
"",
"TU Darmstadt"
],
[
"Khodyachykh",
"S.",
"",
"TU Darmstadt"
],
[
"Kostial",
"S.",
"",
"TU Darmstadt"
],
[
"Laier",
"U.",
"",
"TU Darmstadt"
],
[
"Lenhardt",
"A.",
"",
"TU Darmstadt"
],
[
"Loos",
"H.",
"",
"TU Darmstadt"
],
[
"Muehl",
"J.",
"",
"TU Darmstadt"
],
[
"Platz",
"M.",
"",
"TU Darmstadt"
],
[
"Richter",
"A.",
"",
"TU Darmstadt"
],
[
"Richter",
"S.",
"",
"TU Darmstadt"
],
[
"Schweizer",
"B.",
"",
"TU Darmstadt"
],
[
"Stascheck",
"A.",
"",
"TU Darmstadt"
],
[
"Titze",
"O.",
"",
"TU Darmstadt"
],
[
"Watzlawik",
"S.",
"",
"TU Darmstadt"
],
[
"Doebert",
"S.",
"",
"CERN"
]
]
|
physics/0008080 | Deepak Raparia | D. Raparia, A. G. Ruggiero | A Super-Conducting Linac Injector for the BNL-Ags | 3 pages | eConf C000821 (2000) TUD18 | null | null | physics.acc-ph | null | This paper reports on the feasibility study of a proton Super-Conducting
Linac (SCL) as a new injector to the Alternating Gradient Synchrotron (AGS) of
the Brookhaven National Laboratory (BNL). The Linac beam energy is in the range
of 1.5 to 2.4 GeV. The Beam intensity is adjusted to provide an average beam
power of 4 MW at the top energy of 24 GeV. The repetition rate of the SCL-AGS
facility is 5 beam pulses per second.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 10:35:39 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Raparia",
"D.",
""
],
[
"Ruggiero",
"A. G.",
""
]
]
|
physics/0008081 | Deepak Raparia | J. Alessi, D. Raparia, A. G. Ruggiero | A Super-Conducting Linac Driver for the HFBR | 3 pages | eConf C000821 (2000) TUD19 | null | null | physics.acc-ph | null | This paper reports on the feasibility study of a proton Super-Conducting
Linac (SCL) as a driver gor the High-Flux Breader Reactor (HFBR) at Brookhaven
National Laboratory (BNL). The Linac operates in Continuos Wave (CW) mode to
produce an average 10 MW of beam power. The Linac energy is 1.0 GeV. The
average proton beam intensity is 10 mA.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 10:56:51 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Alessi",
"J.",
""
],
[
"Raparia",
"D.",
""
],
[
"Ruggiero",
"A. G.",
""
]
]
|
physics/0008082 | null | S.I. Bityukov (IHEP, Protvino), N.V. Krasnikov (INR, Moscow), V.A.
Taperechkina (MSA IECS, Serpukhov) | On the Confidence Interval for the parameter of Poisson Distribution | 12 pages (1 LaTeX file), 3 eps files (figures), references to
Sections are corrected | null | null | null | physics.data-an | null | The possibility of construction of continuous analogue of Poisson
distribution with the search of bounds of confidence intervals for parameter of
Poisson distribution is discussed. Also, in the article is shown that the true
value of a parameter of Poisson distribution for the observed value $\hat x$
has Gamma distribution with the scale parameter, which is equal to one, and the
shape parameter, which is equal to $\hat x$. The results of numerical
construction of confidence intervals are presented.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 20:54:23 GMT"
},
{
"version": "v2",
"created": "Sun, 3 Sep 2000 15:59:49 GMT"
},
{
"version": "v3",
"created": "Tue, 12 Sep 2000 12:48:42 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Bityukov",
"S. I.",
"",
"IHEP, Protvino"
],
[
"Krasnikov",
"N. V.",
"",
"INR, Moscow"
],
[
"Taperechkina",
"V. A.",
"",
"MSA IECS, Serpukhov"
]
]
|
physics/0008084 | Hitoshi Hayano | H. Hayano (KEK, Tsukuba, Ibaraki, Japan) | Wire Scanners for Small Emittance Beam Measurement in Atf | Linac2000, MOC01 | eConf C000821 (2000) MOc01 | null | null | physics.acc-ph | null | The wire scanners are used for a measurement of the very small beam size and
the emittance in Accelerator Test Facility (ATF). They are installed in the
extraction beam line of ATF damping ring. The extracted beam emittance are
ex=1.3x10-9 m.rad, ey=1.7x10-11 m.rad with 2x109 electrons/bunch intensity and
1.3GeV energy. The wire scanners scan the beam by a tungsten wire with beam
repetition 0.78Hz. The scanning speed is, however, very slow(~500um/sec). Since
the extracted beam is quite stable by using the double kicker system, precision
of the size measurement is less than 2um for 50 - 150um horizontal beam size
and 0.3um for 8 - 16um vertical beam size. The detail of the system and the
performance are described.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 11:58:44 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Hayano",
"H.",
"",
"KEK, Tsukuba, Ibaraki, Japan"
]
]
|
physics/0008085 | Mosnier | Alban Mosnier | Energy Stability in a High Intensity Pulsed SC Proton Linac | Linac2000 paper ID No. THB10 reasons for reposting : Figures have
been changed | eConf C000821 (2000) THB10 | null | null | physics.acc-ph | null | Spallation source dedicated for neutron scattering experiments, as well as
multi-purpose facilities serving several applications call for pulsed mode
operation of a high intensity proton linac. There is general agreement on the
superconducting technology for the high-energy part, which offers some
advantages, like higher gradient capabilities or operational costs reduction,
as compared to room-temperatures accelerating structures. This mode of
operation however could spoil the energy stability of the proton beam and needs
thus to be carefully studied. First, transient beam-loading effects, arising
from the large beam phase slippage along a multi-cell cavity and associated
with the finite RF energy propagation, can induce significant energy modulation
with a too small cell-to-cell coupling or a too large number of cells. Second,
due to beam phase slippage effects along the linac, energy spread exhibits a
larger sensitivity to cavity fields fluctuations than relativistic particles. A
computer code, initially developed for electron beams has been extended to
proton beams. It solves the 6xN coupled differential equations, needed to
describe cavity fields and beam-cavity interactions of a high-energy linac
composed of N cavities. Simulation examples on a typical pulsed accelerator are
given with various error sources, like Lorentz forces or microphonics detuning,
beam injection energy offsets, intensity jitters ...
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 12:32:54 GMT"
},
{
"version": "v2",
"created": "Fri, 18 Aug 2000 08:42:36 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Mosnier",
"Alban",
""
]
]
|
physics/0008087 | Winfried Barth | W. Barth | Commissioning of the 1.4 Mev/u High Current Heavy Ion Linac at Gsi | Linac 2000, FR201, 5 pages, 8 figures | eConf C000821 (2000) FR201 | null | null | physics.acc-ph | null | The disassembly of the Unilac prestripper linac of the Wideroe type took
place at the beginning of 1999. An increase of more than two orders of
magnitude in particle number for the most heavy elements in the SIS had to be
gained. Since that time the new High Current Injector (HSI) consisting of
H-type RFQ and DTL-structures for dual beam operation was installed and
successfully commissioned. The High Charge Injector (HLI) supplied the main
linac during that time. Simultaneously conditioning and running in of the
rf-transmitters and rf-structures were done. The HSI commissioning strategy
included beam investigation after each transport and acceleration section,
using a versatile diagnostic test stand. Results of the extensive commissioning
measurements (e.g. transverse emittance, bunch width, beam transmission) behind
LEBT, RFQ, Super Lens, IH tank I and II and stripping section will be
discussed. An 40Ar1+ beam coming from a MUCIS ion source was used to fill the
linac up to the theoretical space charge limit. Routine operation started in
November 1999.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 15:55:02 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Barth",
"W.",
""
]
]
|
physics/0008088 | Winfried Barth | W. Barth, P. Forck | The New Gas Stripper and Charge State Separator of the Gsi High Current
Injector | Linac 2000, MOD13, 3 pages, 7 figures | eConf C000821 (2000) MOD13 | null | null | physics.acc-ph | null | The GSI Unilac was upgraded as a high current injector for the SIS in 1999.
Therefore, the stripping section [1] at 1.4 MeV/u, where a beam transport under
highest space charge conditions and multi beam operation had to be established,
was completely new designed. Results of the commissioning of the stripper
section will be presented. The beam transport to the new gas stripper, and the
charge state analysis under space charge conditions confirmed the calculations.
A 238U4+ beam - coming from a MEVVA ion source and accelerated by the new
injector linac- was stripped (with the expected stripping efficiency) to the
charge state 28+ and successfully separated by the new spectrometer (15 degree
and 30 degree kicker magnets). The transport and matching to the poststripper
accelerator under highest space charge conditions was investigated with a 15
emA 40Ar10+ beam. Especially space charge and charge state dependent emittance
growth effects in 6d-phase space will be discussed.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 16:06:56 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Barth",
"W.",
""
],
[
"Forck",
"P.",
""
]
]
|
physics/0008089 | William T. Roybal | W. T. Roybal, J. Bradley III, D. Rees, P. A. Torrez, D. K. Warner, J.
DeBaca | High-power Circulator Test Results at 350 MHz and 700 MHz | LINAC 2000 Conference Paper # THE06 | eConf C000821 (2000) THE06 | null | null | physics.acc-ph | null | The high-power RF systems for the Accelerator Production of Tritium (APT)
program require high-power circulators at 350 MHz and 700 MHz to protect 1 MW
Continuous Wave (CW) klystrons from reflected power. The 350 MHz circulator is
based on the CERN, ESRF, and APS designs and has performed very well. The 700
MHz circulator is a new design. Prototype 700 MHz circulators have been
high-power tested at Los Alamos National Laboratory (LANL). The first of these
circulators has satisfied performance requirements. The circulator
requirements, results from the testing, and lessons learned from this
development are presented and discussed.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 16:43:17 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Roybal",
"W. T.",
""
],
[
"Bradley",
"J.",
"III"
],
[
"Rees",
"D.",
""
],
[
"Torrez",
"P. A.",
""
],
[
"Warner",
"D. K.",
""
],
[
"DeBaca",
"J.",
""
]
]
|
physics/0008090 | Joseph F. Tooker | J.Kuzminski, K.C.D.Chan, R.Gentzlinger, and P. Maccioni | Industrial Fabrication of Medium-Beta SCRF Cavities for a High-Intensity
Proton Linac | THD06, XX International Linac Conference, 3 pages, RF cavity,
superconducting | eConf C000821 (2000) THD06 | null | null | physics.acc-ph | null | During 1999, four 700-MHz, medium-beta (b = 0.64), superconducting radio
frequency (SCRF) cavities for a high-intensity proton linac project at Los
Alamos National Laboratory (LANL) were manufactured by industry. The SCRF
cavities were designed by a LANL team in Los Alamos, New Mexico, USA, and
manufactured at a CERCA plant in Romans, France. The cavities were made of
4-mm-thick, solid niobium sheets with a residual resistivity ratio (RRR)
greater than 250. These niobium sheets were supplied by Wah Chang (USA),
Heraeus AG (Germany), and Tokyo Denkai (Japan). The SCRF cavities were shipped
to LANL for performance testing. This paper describes the experience gained
during the manufacturing process at CERCA.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 17:08:08 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Kuzminski",
"J.",
""
],
[
"Chan",
"K. C. D.",
""
],
[
"Gentzlinger",
"R.",
""
],
[
"Maccioni",
"P.",
""
]
]
|
physics/0008091 | Wolfgang F. O. Mueller | P. Huelsmann, W.F.O. Mueller, H. Klein | The Diffraction Model and its Applicability for Wakefield Calculations | Linac2000 conference paper ID No. MOE06 | eConf C000821 (2000) MOE06 | null | null | physics.acc-ph | null | The operation of a Free Electron Laser (FEL) in the ultraviolet or in the
X-ray regime requires the acceleration of electron bunches with an rms length
of 25 to 50 micro meters. The wakefields generated by these sub picosecond
bunches extend into the frequency range well beyond the threshold for Cooper
pair breakup (about 750 GHz) in superconducting niobium at 2 K. It is shown,
that the superconducting cavities can indeed be operated with 25 micro meter
bunches without suffering a breakdown of superconductivity (quench), however at
the price of a reduced quality factor and an increased heat transfer to the
superfluid helium bath. This was first shown by wakefield calculations based on
the diffraction model. In the meantime a more conventional method of computing
wake fields in the time domain by numerical methods was developed and used for
the wakefield calculations. Both methods lead to comparable results: the
operation of TESLA with 25 micro meter bunches is possible but leads to an
additional heat load due to the higher order modes (HOMs). Therefore HOM
dampers for these high frequencies are under construction. These dampers are
located in the beam pipes between the 9-cell cavities. So it is of interest, if
there are trapped modes in the cavity due to closed photon orbits. In this
paper we investigate the existence of trapped modes and the distribution of
heat load over the surface of the TESLA cavity by numerical photon tracking.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 17:30:12 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Huelsmann",
"P.",
""
],
[
"Mueller",
"W. F. O.",
""
],
[
"Klein",
"H.",
""
]
]
|
physics/0008093 | Stanley J. Pasky | R. Soliday, S. Pasky, M. Borland | Automated Operation of the APS LINAC using the Procedure Execution
Manager | LINAC 2000, TUC14 | eConf C000821 (2000) TUc14 | null | null | physics.acc-ph | null | The Advanced Photon Source (APS) linear accelerator has two thermionic
cathode rf guns and one photocathode rf gun. The thermionic guns are used
primarily for APS operations while the photocathode gun is used as a
free-electron laser (FEL) driver. With each gun requiring a different lattice
and timing configuration, the need to change quickly between guns puts great
demands on the accelerator operators. Using the Procedure Execution Manager
(PEM), a software environment for managing automated procedures, we have made
start-up and switch-over of the linac systems both easier and more reliable.
The PEM is a graphical user interface written in Tcl/Tk that permits the user
to invoke "machine procedures" and control their execution. It allows
construction of procedures in a hierarchical, parallel fashion, which makes for
efficient execution and development. In this paper, we discuss the features and
advantages of the PEM environment as well the specifics of our procedures for
the APS linac.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 18:26:12 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Soliday",
"R.",
""
],
[
"Pasky",
"S.",
""
],
[
"Borland",
"M.",
""
]
]
|
physics/0008094 | Edward Halerewicz Jr. | E. F. Halerewicz Jr | The quantum vacuum, fractal geometry, and the quest for a new theory of
gravity | 20 pages, LaTeX2e, LaTeX errors corrected | null | null | null | physics.gen-ph | null | In this letter recent developments are shown in experimental and theoretical
physics which brings into question the validity of General Relativity. This
letter emphasizes the construction of a fractal 3+\phi^3 spacetime, in
N-dimensions in order to formalize a physical and consistent theory of `quantum
gravity.' It is then shown that a `quantum gravity' effect could arise by means
of the Strong Equivalence Principle. Which is made possible through a pressure
of the form -kappa(R^{ca}_{b}-{1\over 2}g^{c sigma}_{ab}R^c)=kappa T^{c
sigma}_{ab}. Where it is seen that nuclear pressures can be added to rethe
gravitational field equations by means of twistor spaces.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 19:37:37 GMT"
},
{
"version": "v2",
"created": "Tue, 20 Mar 2001 07:49:15 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Halerewicz",
"E. F.",
"Jr"
]
]
|
physics/0008097 | Lawrence Rybarcyk | L. J. Rybarcyk, J. D. Schneider, H. V. Smith, L. M. Young and M. E.
Schulze | LEDA Beam Operations Milestone and Observed Beam Transmission
Characteristics | LINAC2000 TUD15, 3 pages, 4 figures, RFQ, LEDA, APT | eConf C000821 (2000) TUD15 | null | null | physics.acc-ph | null | Recently, the Low-Energy Demonstration Accelerator (LEDA) portion of the
Accelerator Production of Tritium (APT) project reached its 100-mA, 8-hr CW
beam operation milestone. LEDA consists of a 75-keV proton injector, 6.7-MeV,
350-MHz CW radio-frequency quadrupole (RFQ) with associated high-power and
low-level rf systems, a short high-energy beam transport (HEBT) and high-power
(670-kW CW) beam dump. During the commissioning phase it was discovered that
the RFQ field level must to be approximately 5-10% higher than design in order
to accelerate the full 100-mA beam with low losses. Measurements of a
low-duty-factor, 100-mA beam show the beam transmission is unexpectedly low for
RFQ field levels between ~90 and 105% of design. This paper will describe some
aspects of LEDA operations critical to achieving the above milestone.
Measurement and simulation results for reduced RFQ beam transmission near
design operating conditions are also presented.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 22:24:06 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Rybarcyk",
"L. J.",
""
],
[
"Schneider",
"J. D.",
""
],
[
"Smith",
"H. V.",
""
],
[
"Young",
"L. M.",
""
],
[
"Schulze",
"M. E.",
""
]
]
|
physics/0008098 | Paul Corredoura | P. Corredoura, C. Adolphsen | RF Control System for the NLC Linacs | 3 pages, presented at the 20th International Linac Conference,
Monterey California, August 21-25, 2000 | eConf C000821 (2000) TUc18 | null | SLAC Pub #8571 | physics.acc-ph physics.ins-det | null | The proposed Next Linear Collider contains a large number of linac RF systems
with new requirements for wideband klystron modulation and accurate RF vector
detection. The system will be capable of automatically phasing each klystron
and compensating for beam loading effects. Accelerator structure alignment is
determined by detection of the beam induced dipole modes with a receiver
similar to that used for measuring the accelerator RF and is incorporated into
the RF system topology. This paper describes the proposed system design, signal
processing techniques and includes preliminary test results.
| [
{
"version": "v1",
"created": "Wed, 16 Aug 2000 23:30:30 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Corredoura",
"P.",
""
],
[
"Adolphsen",
"C.",
""
]
]
|
physics/0008099 | Scott D. Nelson | Scott D. Nelson, Michael Vella | RF Cell Modeling and Experiments for Wakefield Minimization in DARHT-II | LINAC2000 TUB09 | eConf C000821 (2000) TUB09 | null | null | physics.acc-ph | null | Electron beams of linear induction accelerators experience deflective forces
caused by RF fields building up as a result of accelerating cavities of finite
size. These forces can significantly effect the beam when a long linac composed
of identical cells is assembled. Recent techniques in computational modeling,
simulation, and experiments for 20 MeV DARHT-II (Dual Axis Radiographic
Hydrodynamic Test) accelerator cells were found to reduce the wakefield
impedance of the cells from 800 ohms/meter to 350 ohms/meter and experimental
results confirm the results of the modeling efforts. Increased performance of
the cell was obtained through a parametric study of the accelerator structure,
materials, material tuning, and geometry. As a result of this effort, it was
found that thickness-tuned ferrite produced a 50% deduction in the wakefield
impedance in the low frequency band and was easily tunable based on the
material thickness. It was also found that shaped metal sections allow for
high-Q resonances to be de-tuned, thus decreasing the amplitude of the
resonance and increasing the cell s performance. For the geometries used for
this cell, a roughly 45 degree angle had the best performance in affecting the
wakefield modes.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 01:18:19 GMT"
},
{
"version": "v2",
"created": "Mon, 21 Aug 2000 18:07:28 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Nelson",
"Scott D.",
""
],
[
"Vella",
"Michael",
""
]
]
|
physics/0008100 | Viatcheslav M. Pavlov | VEPP-5 Team (Budker INP, Novosibirsk, Russia) | Test of accelerating structure for VEPP-5 preinjector | 3 pages, 5 figures, Linac2000, [3] S.N. Dolya, W.I.Furman, V.V.
Kobets, E.M. Lasiev, Yu.A. Metelkin, V.A. Shvets, A.P. Soumbaev, the VEPP-5
Team, "Linac LUE200. First testing results" (submitted to this conference) | eConf C000821 (2000) TUA21 | null | null | physics.acc-ph | null | Preinjector VEPP-5 electron linac consists of two linear accelerators on
energy 300 MeV and 510 MeV and includes 14 accelerating structures [1]. First
accelerating structures both linacs have increased average rate of acceleration
25-30 MeV/m, and other regular sections up to 17-20 MeV/m. This paper presents
the results of basic test of 3-meter long accelerating structure. Average rate
of acceleration of an electron beam 35 MeV/m was achieved. The electron beam
energy up to 105 MeV was obtained.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 06:08:40 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"5 Team",
"",
""
]
]
|
physics/0008102 | Richard Scrivens | C.E. Hill (1), A. Lombardi (1), R. Scrivens (1), M. Vretenar (1), A.
Feschenko (2), A. Liou (2) ((1) CERN, Geneva, Switzerland, (2)INR, Moscow,
Russia.) | Tests of the CERN Proton Linac Performance for LHC-Type Beams | LINAC 2000, TUC14, 3 pages, 5 figures | eConf C000821 (2000) TUD17 | null | null | physics.acc-ph | null | As the pre-injector of the LHC injector chain, the proton linac at CERN is
required to provide a high-intensity (180mA) beam to the Proton Synchrotron
Booster. The results of measurements at this intensity will be presented.
Furthermore, the linac is now equipped with bunch shape monitors from INR,
Moscow, which have allowed the comparison of the Alvarez tank RF settings with
simulations.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 09:26:20 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Hill",
"C. E.",
""
],
[
"Lombardi",
"A.",
""
],
[
"Scrivens",
"R.",
""
],
[
"Vretenar",
"M.",
""
],
[
"Feschenko",
"A.",
""
],
[
"Liou",
"A.",
""
]
]
|
physics/0008103 | Peter Forck | P. Forck, F. Heymach, T. Hoffmann, A. Peters, P. Strehl | Measurement of the six Dimensional Phase Space at the New GSI High
Current Linac | LINAC contribution, poster MOC09 | eConf C000821 (2000) MOc09 | null | null | physics.acc-ph | null | For the characterization of the 10 mA ion beam delivered by the new High
Current Linac at GSI, sophisticated, mainly non-intersepting diagnostic devices
were developed. Besides the general set-up of a versatile test bench, we
discuss in particular bunch shape and emittance measurements. A direct
time-of-flight technique with a diamond particle detector is used to observe
the micro-bunch distribution with a resolution of $\sim 25 $ ps equals
0.3$^{o}$ in phase. For the determination of the energy spread a coincidence
technique is applied, using secondary electrons emitted by the ion passing
through an aluminum foil 80 cm upstream of the diamond detector. The transverse
emittance is measured within one macro pulse with a pepper-pot system equipped
with a high performance CCD camera.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 09:29:38 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Forck",
"P.",
""
],
[
"Heymach",
"F.",
""
],
[
"Hoffmann",
"T.",
""
],
[
"Peters",
"A.",
""
],
[
"Strehl",
"P.",
""
]
]
|
physics/0008104 | Matthias Liepe | N. Baboi, M. Ferrario, M. Liepe, J. Sekutowicz | Superconducting Superstructure for the TESLA Collider: New Results | for LINAC 2000, 3 pages, 5 figures | eConf C000821 (2000) TUA15 | null | null | physics.acc-ph | null | A new cavity-chain layout has been proposed for the main linac of the TESLA
linear collider. This superstructure-layout is based upon four 7-cell
superconducting standing-wave cavities, coupled by short beam pipes. The main
advantages of the superstructure are an increase in the active accelerating
length in TESLA and a saving in rf components, especially power couplers, as
compared to the present 9-cell cavities. The proposed scheme allows to handle
the field-flatness tuning and the HOM damping at sub-unit level, in contrast to
standard multi-cell cavities. The superstructure-layout is extensively studied
at DESY since 1999. Computations have been performed for the rf properties of
the cavity-chain, the bunch-to-bunch energy spread and multibunch dynamics. A
copper model of the superstructure has been built in order to compare with the
simulations and for testing the field-profile tuning and the HOM damping
scheme. A "proof of principle" niobium prototype of the superstructure is now
under construction and will be tested with beam at the TESLA Test Facility in
2001. In this paper we present latest results of these investigations.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 11:43:46 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Baboi",
"N.",
""
],
[
"Ferrario",
"M.",
""
],
[
"Liepe",
"M.",
""
],
[
"Sekutowicz",
"J.",
""
]
]
|
physics/0008105 | Andreas Sauer | A. Sauer, H. Deitinghoff, H. Klein (Institut fuer Angewandte Physik
(IAP) Universitaet Frankfurt am Main) | Beam Dynamics Studies for a High Current Ion Injector | paper for LINAC 2000, id number THB06, beam dynamics simulations,
high current and high intensity beams, matching to RFQ and DTL, emittance
growth, IFMIF | eConf C000821 (2000) THB06 | null | null | physics.acc-ph | null | Recent ion source developments resulted in the generation of high brilliance,
high current beams of protons and light ions. After extraction and transport
the beams with large internal space charge forces have to be captured, bunched
and preaccelerated for the injection into the following driver part of a new
generation of high intensity beam facilities for neutron sources, energy
production, transmutation e.g. A combination of RFQ and DTL is considered to be
a good solution for such a high current ion injector. Some preliminary beam
dynamics layouts have been investigated by multiparticle simulations. Basic
parameters like frequency, ion energy and sparking have been varied for the
International Fusion Material Irradiation Facility (IFMIF) scenario as an
example. The main interest was directed to high transmission, low losses and
emittance conservation. The beam matching to the RFQ is shortly discussed as
well as the matching between RFQ and DTL.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 11:55:21 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Sauer",
"A.",
"",
"Institut fuer Angewandte Physik"
],
[
"Deitinghoff",
"H.",
"",
"Institut fuer Angewandte Physik"
],
[
"Klein",
"H.",
"",
"Institut fuer Angewandte Physik"
]
]
|
physics/0008106 | null | M. Pabst, K. Bongardt (Forschungszentrum Juelich GmbH, Germany), A.
Letchford (RAL, Didcot, U.K.) | High Current Beam Dynamics in an Ess SC Linac | LINAC2000 conference contribution, 3 pages, 4 figures | eConf C000821 (2000) THB03 | null | null | physics.acc-ph | null | Three alternative designs of the European Spallation Source (ESS) high energy
linac are described. The most promising ones are either a normalconducting (nc)
coupled cavity linac (CCL) up tofinal energy or a change at 407 MeV to only one
group of 6 cell superconducting (sc) elliptical cavities.
Fully 3d Monte Carlo simulations are presented for both options, optimized
for reduced halo formation at the linac end. For the error free matched case,
especially the halo formation in the longitudinal plane is more pronounced for
the hybrid solution with its superconducting cavities, caused by the
unavoidable phase slippage, but still quite well acceptable for loss free ring
injection. Simulations however for a 30% mismatched dense core, surrounded in
addition by 1.5% halo particles are showing few particles with very large
amplitudes even in real space. This case represents halo formation in front to
end simulations, caused by current fluctuations, filamented RFQ output
distribution and enhanced by accumulated field errors.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 13:18:54 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Pabst",
"M.",
"",
"Forschungszentrum Juelich GmbH, Germany"
],
[
"Bongardt",
"K.",
"",
"Forschungszentrum Juelich GmbH, Germany"
],
[
"Letchford",
"A.",
"",
"RAL, Didcot, U.K."
]
]
|
physics/0008107 | Joseph F. Tooker | G. Spalek, D.W. Christiansen, P.D.Smith, P.T. Greninger, and C.M.
Charman | Studies of Coupled Cavity Linac (CCL) Accelerating Structures with 3-D
Codes | THD18, XX INternational Linac Conference, 3 pages, APT, CCL, 3D | eConf C000821 (2000) THD18 | null | null | physics.acc-ph | null | The cw CCL being designed for the Accelerator Production of Tritium (APT)
project accelerates protons from 96MeV to 211MeV. It consists of 99 segments
each containing up to seven accelerating cavities. Segments are coupled by
intersegment coupling cavities and grouped into supermodules. The design method
needs to address not only basic cavity sizing for a given coupling and pi/2
mode frequency, but also the effects of high power densities on the cavity
frequency, mechanical stresses, and the structure's stop band during operation.
On the APT project, 3-D RF (Ansoft Corp.'s HFSS) and coupled RF/structural
(Ansys Inc.'s ANSYS) codes are being used to develop tools to address the above
issues and guide cooling channel design. The code's predictions are being
checked against available low power Aluminum models. Stop band behavior under
power will be checked once the tools are extended to CCDTL structures that have
been tested at high power. A summary of calculations made to date and agreement
with measured results will be presented.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 13:57:19 GMT"
},
{
"version": "v2",
"created": "Thu, 17 Aug 2000 23:46:55 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Spalek",
"G.",
""
],
[
"Christiansen",
"D. W.",
""
],
[
"Smith",
"P. D.",
""
],
[
"Greninger",
"P. T.",
""
],
[
"Charman",
"C. M.",
""
]
]
|
physics/0008109 | Anatoly Krasnykh | Anatoly Krasnykh | Analyses of klystron modulator approaches for NLC | 3 pages, 6 figures, THA15, to be submitted at XX International Linac
Conference, LINAC2000, Monterey, CA | eConf C000821 (2000) THA15 | null | SLAC-PUB-8564 | physics.acc-ph | null | Analyze of experimental results shows that the energy discharge efficiency of
the modern modulators is 0.92-0.93. The energy transfer efficiency can be
reached up to 0.7 for 1.5 usec pulse width and up to 0.8 for 3.0 usec
accordingly. The geometry and core material of the transformer is one element
of modulator, which limits the efficiency due to limitation if transmission
band of the pulse power. Ways of the rise of energy transfer efficiency had
been discussed. The use of features of coupled transmission lines lies in the
base of an idea how the energy transfer efficiency can be improved up to 0.85
in the frame of the conventional approach. In the second part of the paper the
transformerless modulator approaches are presented upon a modified Marx method
of voltage multiplication using on/off IGBT instead of on switches.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 15:10:44 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Krasnykh",
"Anatoly",
""
]
]
|
physics/0008110 | Winfried Barth | J. Glatz, J. Klabunde, U. Scheeler, D. Wilms | Operational Aspects of the High Current Upgrade at the Unilac | Linac 2000, MOD12, 3 pages, 5 figures | eConf C000821 (2000) MOD12 | null | null | physics.acc-ph | null | With the new GSI High Current Injector, the beam pulse intensity will be
increased by more than two orders of magnitude. The high beam power and the
short stopping range at particle energies below 12 MeV/u can destroy
accelerator components even during a single beam pulse. Therefore, the
operation of the whole accelerator facility has required major changes in
hardware, software and operating strategy. A sophisticated beam diagnostic
system is indispensable for a safe operation. Preferably non-destructive
devices were installed. Destructive elements, e.g. beam stoppers, slits,
apertures, were improved in order to withstand the high beam power. Automatic
damage prevention was realised by beam loss monitors comparing and evaluating
very fast beam current transformer signals. Additionally, the component status
will be controlled permanently. For foil stripping at 11.4 MeV/u, a magnetic
beam sweeping system was installed Thereby, the hit area will be increased
during one 100 micro sec pulse. During operation, manual variation of
parameters has to be reduced. Set-up and automatic beam adjustment procedures
have to exclude uncontrolled beam loss. The versatility of the UNILAC is
enhanced by the possible three-beam operation on a pulse-to-pulse basis. Since
November 1999 the upgraded UNILAC is serving the experiments.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 15:20:28 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Glatz",
"J.",
""
],
[
"Klabunde",
"J.",
""
],
[
"Scheeler",
"U.",
""
],
[
"Wilms",
"D.",
""
]
]
|
physics/0008111 | Dario Villani | Dario Villani and Andrei E. Ruckestein | Looking Forward to Pricing Options from Binomial Trees | 12 pages, 1 figure | null | null | null | physics.gen-ph cond-mat | null | We reconsider the valuation of barrier options by means of binomial trees
from a "forward looking" prospective rather than the more conventional
"backward induction" one used by standard approaches. This reformulation allows
us to write closed-form expressions for the value of European and American put
barrier-options on a non-dividend-paying stock.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 16:16:38 GMT"
},
{
"version": "v2",
"created": "Mon, 21 Aug 2000 18:36:39 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Villani",
"Dario",
""
],
[
"Ruckestein",
"Andrei E.",
""
]
]
|
physics/0008113 | Amy H. Regan | Amy Regan, Sung-il Kwon, Tony S. Rohlev, Yi-Ming Wang, Mark S. Prokop,
David W. Thomson | Design of the SNS Normal Conducting Linac RF Control System | TUC17 | eConf C000821 (2000) TUc17 | null | null | physics.acc-ph | null | The Spallation Neutron Source (SNS) is being designed for operation in 2004.
The SNS is a 1 GeV machine consisting of a combination normal-conducting and
super-conducting linac as well as a ring and target area. The linac front end
is a 402.5 MHz RFQ being developed by Lawrence Berkeley Lab. The DTL (at 402.5
MHz) and the CCL (at 805 MHz) stages are being developed by Los Alamos National
Laboratory. The expected output energy of the DTL is 87 MeV and that of the CCL
is 185 MeV. The RF control system under development for the linac is based on
the Low Energy Demonstration Accelerator (LEDA) control system with some new
features. This paper will discuss the new design approach and its benefits.
Block diagrams and circuit specifics will be addressed. The normal conducting
RF control system will be described in detail with references to the
super-conducting control system where appropriate.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 15:53:13 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Regan",
"Amy",
""
],
[
"Kwon",
"Sung-il",
""
],
[
"Rohlev",
"Tony S.",
""
],
[
"Wang",
"Yi-Ming",
""
],
[
"Prokop",
"Mark S.",
""
],
[
"Thomson",
"David W.",
""
]
]
|
physics/0008114 | Michael Borland | Michael Borland, John Lewellen, Steve Milton (ANL) | A Highly Flexible Bunch Compressor for the APS LEUTL FEL | LINAC2000 THC05 3 pages 1 figure | eConf C000821 (2000) THc05 | null | null | physics.acc-ph | null | The LEUTL FEL at the APS has achieved gain at 530 nm with peak beam current
\~100 A. In an effort to push to 120 nm and beyond, we have designed and are
commissioning a bunch compressor to increase the peak current to 600 A or more.
The bunch compressor uses a four-dipole chicane at an energy of 100 to 210 MeV.
To provide options for control of emittance growth due to coherent synchrotron
radiation (CSR), the chicane has variable R56. The central pair of dipoles is
movable, accommodating variable R56 with less concern about emittance dilution
from nonuniformity of the dipole field. The symmetry of the chicane is also
variable via longitudinal motion of the final dipole, which is predicted to
have an effect on emittance growth. Following the chicane, a three-screen
emittance measurement system should permit resolution of the difference in
emittance growth between various chicane configurations. A vertical bending
magnet analysis line is present to permit imaging of correlations between
transverse and energy coordinates. This paper reviews the features and expected
performance of the chicane. A companion paper discusses the physics design in
detail.
Work supported by the U.S. Department of Energy, Office of Basic Energy
Sciences, under Contract No. W-31-109-ENG-38.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 15:55:38 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Borland",
"Michael",
"",
"ANL"
],
[
"Lewellen",
"John",
"",
"ANL"
],
[
"Milton",
"Steve",
"",
"ANL"
]
]
|
physics/0008115 | Feschenko | A.V.Feschenko, V.A.Moiseev | Space Charge Effects in Bunch Shape Monitors | Report for the Linac2000 conf., MOC13, 3 pages, 8 figures | eConf C000821 (2000) MOc13 | null | null | physics.acc-ph | null | The operation and parameters of Bunch Shape Monitors using coherent
transformation of time structure of an analyzed beam into a spatial one of low
energy secondary electrons emitted from a wire target is influenced by the
characteristics of a beam under study. The electromagnetic field of a bunch
disturbs the trajectories of secondary electrons, thus resulting in a
degradation of phase resolution and in errors of phase reading. Another effect
is the perturbation of the target potential due to the current in the wire
induced by a bunch as well as due to current compensating emission of the
secondary electrons. The methods, the models and the results of simulations are
presented.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 16:02:46 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Feschenko",
"A. V.",
""
],
[
"Moiseev",
"V. A.",
""
]
]
|
physics/0008116 | Michael Borland | Nicholas Sereno, Michael Borland, Alex Lumpkin (ANL) | Use of Coherent Transition Radiation to Set Up the APS RF Thermionic Gun
to Produce High-Brightness Beams for SASE FEL Experiments | LINAC2000 MOB17 3 pages 8 figures | eConf C000821 (2000) MOB17 | null | null | physics.acc-ph | null | We describe use of the Advanced Photon Source (APS) rf thermionic gun, alpha
magnet beamline, and linac to produce a stable high-brightness beam in excess
of 100 amperes peak current with normalized emittance of 10 pi mm-mrad. To
obtain peak currents greater than 100 amperes, the rf gun system must be tuned
to produce a FWHM bunch length on the order of 350 fs. Bunch lengths this short
are measured using coherent transition radiation (CTR) produced when the rf gun
beam, accelerated to 40 MeV, strikes a metal foil. The CTR is detected using a
Golay detector attached to one arm of a Michelson interferometer. The alpha
magnet current and gun rf phase are adjusted so as to maximize the CTR signal
at the Golay detector, which corresponds to the minimum bunch length. The
interferometer is used to measure the autocorrelation of the CTR radiation. The
minimum phase approximation is used to derive the bunch profile from the
autocorrelation. The high-brightness beam is accelerated to 217 MeV and used to
produce SASE in five APS undulators installed in the Low- Energy Undulator Test
Line (LEUTL) experiment hall. Initial optical measurements showed a gain length
of 1.3 m at 530 nm. * Work supported by U. S. Department of Energy, Office of
Basic Energy Sciences, under Contract No. W-31-109-ENG-38.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 16:03:52 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Sereno",
"Nicholas",
"",
"ANL"
],
[
"Borland",
"Michael",
"",
"ANL"
],
[
"Lumpkin",
"Alex",
"",
"ANL"
]
]
|
physics/0008118 | Yu-Jiuan Chen | Yu-Jiuan Chen and Arthur C. Paul | Physics Design Considerations of Diagnostic X Beam Transport System | 3 pages, 0 figures, LINAC 2000, TBU20 | eConf C000821 (2000) TUB20 | null | null | physics.acc-ph | null | Diagnostic X (D-X) transport system would extract the beam from the
downstream transport line of the second- axis of the Dual Axis Radiographic
Hydrodynamic Test facility (DARHT-II) and transport this beam to the D-X firing
point via four branches of the beamline in order to provide four lines of sight
for x-ray radiography. The design goal is to generate four DARHT-II-like x-ray
pulses on each line of sight. In this paper, we discuss several potential beam
quality degradation processes in the passive magnet lattice beamline and
indicate how they constrain the D-X beamline design parameters, such as the
background pressure, the pipe size, and the pipe material
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 17:36:17 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Chen",
"Yu-Jiuan",
""
],
[
"Paul",
"Arthur C.",
""
]
]
|
physics/0008119 | Yu-Jiuan Chen | Yu-Jiuan Chen, Darwin D.-M. Ho, James F. Mccarrick, Arthur C. Paul,
Stephen Sampayan, Li-Fang Wang, John T. Weir | Physics Design of the ETA-II/Snowtron Double Pulse Target Experiment | 3 pages, 4 figures, LINAC 2000, TBU19 | eConf C000821 (2000) TUB19 | null | null | physics.acc-ph | null | We have modified the single pulse target experimental facility[ ] on the
Experimental Test Accelerator II (ETA-II) to perform the double pulse target
experiments to validate the DARHT-II[, ] multi-pulse target concept. The 1.15
MeV, 2 kA Snowtron injector will provide the first electron pulse. The 6 MeV, 2
kA ETA-II beam will be used as the probe beam. Our modeling indicates that the
ETA-II/Snowtron experiment is a reasonable scaling experiment.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 17:44:59 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Chen",
"Yu-Jiuan",
""
],
[
"Ho",
"Darwin D. -M.",
""
],
[
"Mccarrick",
"James F.",
""
],
[
"Paul",
"Arthur C.",
""
],
[
"Sampayan",
"Stephen",
""
],
[
"Wang",
"Li-Fang",
""
],
[
"Weir",
"John T.",
""
]
]
|
physics/0008120 | Michael G. Mazarakis | M. G. Mazarakis, R. B. Spielman, K. W. Struve, F. W. Long | A New Linear Inductive Voltage Adder Driver for the Saturn Accelerator | 3 pages, 4 figures. This paper is submitted for the 20th Linear
Accelerator Conference LINAC2000, Monterey, CA | eConf C000821 (2000) TUc05 | null | null | physics.acc-ph | null | Saturn is a dual-purpose accelerator. It can be operated as a large-area
flash x-ray source for simulation testing or as a Z-pinch driver especially for
K-line x-ray production. In the first mode, the accelerator is fitted with
three concentric-ring 2-MV electron diodes, while in the Z-pinch mode the
current of all the modules is combined via a post-hole convolute arrangement
and driven through a cylindrical array of very fine wires. We present here a
point design for a new Saturn class driver based on a number of linear
inductive voltage adders connected in parallel. A technology recently
implemented at the Institute of High Current Electronics in Tomsk (Russia) is
being utilized[1].
In the present design we eliminate Marx generators and pulse-forming
networks. Each inductive voltage adder cavity is directly fed by a number of
fast 100-kV small-size capacitors arranged in a circular array around each
accelerating gap. The number of capacitors connected in parallel to each cavity
defines the total maximum current. By selecting low inductance switches,
voltage pulses as short as 30-50-ns FWHM can be directly achieved.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 18:04:23 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Mazarakis",
"M. G.",
""
],
[
"Spielman",
"R. B.",
""
],
[
"Struve",
"K. W.",
""
],
[
"Long",
"F. W.",
""
]
]
|
physics/0008122 | Terry L. Smith | T.L. Smith, M.H. Cho, A.E. Grelick, G. Pile, A. Nassiri, N. Arnold | RF System Upgrades to the Advanced Photon Source Linear Accelerator in
Support of the Fel Operation | LC 2000 (3 pages, 6 figures) | eConf C000821 (2000) THc10 | null | null | physics.acc-ph | null | The S-band linear accelerator, which was built to be the source of particles
and the front end of the Advanced Photon Source injector, is now also being
used to support a low-energy undulator test line (LEUTL) and to drive a
free-electron laser (FEL). The more severe rf stability requirements of the FEL
have resulted in an effort to identify sources of phase and amplitude
instability and implement corresponding upgrades to the rf generation chain and
the measurement system. Test data and improvements implemented and planned are
described
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 18:46:56 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Smith",
"T. L.",
""
],
[
"Cho",
"M. H.",
""
],
[
"Grelick",
"A. E.",
""
],
[
"Pile",
"G.",
""
],
[
"Nassiri",
"A.",
""
],
[
"Arnold",
"N.",
""
]
]
|
physics/0008125 | William A. Reass | William A. Reass, James D. Doss, Robert F. Gribble, Michael T. Lynch,
and Paul J. Tallerico | Progress on the 140 KV, 10 Megawatt Peak, 1 Megawatt Average Polyphase
Quasi-Resonant Bridge, Boost Converter/Modulator for the Spallation Neutron
Source (SNS) Klystron Power System | THE11 | eConf C000821 (2000) THE11 | null | LAUR 00 3748 | physics.acc-ph | null | This paper describes electrical design and operational characteristics of a
zero-voltage-switching 20 kHz polyphase bridge, boost converter/modulator for
klystron pulse application. The DC-DC converter derives the buss voltages from
a standard 13.8 kV to 2300 Y substation cast-core transformer. Energy storage
and filtering is provided by self-clearing metallized hazy polypropylene
traction capacitors. Three "H-Bridge" IGBT switching networks are used to
generate the polyphase 20 kHz transformers primary drive waveforms. The 20 kHz
drive waveforms are chirped the appropriate duration to generate the desired
klystron pulse width. PWM (pulse width modulation) of the individual 20 kHz
pulses is utilized to provide regulated output waveforms with adaptive
feedforward and feedback techniques. The boost transformer design utilizes
amorphous nanocrystalline material that provides the required low core loss at
design flux levels and switching frequencies. Resonant shunt peaking is used on
the transformer secondary to boost output voltage and resonate transformer
leakage inductance. With the appropriate transformer leakage inductance and
peaking capacitance, zero-voltage-switching of the IGBT's is attained,
minimizing switching losses. A review of these design parameters and a
comparison of computer calculations, scale model, and first article results
will be performed.
| [
{
"version": "v1",
"created": "Thu, 17 Aug 2000 21:30:43 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Reass",
"William A.",
""
],
[
"Doss",
"James D.",
""
],
[
"Gribble",
"Robert F.",
""
],
[
"Lynch",
"Michael T.",
""
],
[
"Tallerico",
"Paul J.",
""
]
]
|
physics/0008128 | Daniel Schulte | D. Schulte | Simulation of an Intra-Pulse Interaction Point Feedback for Future
Linear Colliders | LINAC2000 Conference, Paper ID MOA02 | eConf C000821 (2000) MOA02 | null | CERN/PS 2000-051 (AE) | physics.acc-ph | null | In future normal-conducting linear colliders, the beams will be delivered in
short bursts with a length of the order of 100 ns. The pulses will be separated
by several ms. In order to maintain high luminosity, feedback is necessary on a
pulse-to-pulse basis. In addition, intra-pulse feedback that can correct beam
positions and angles within one pulse seem technically feasible. The likely
performances of different feedback options are simulated for the NLC (Next
Linear Collider) and CLIC (Compact Linear Collider).
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 07:18:06 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Schulte",
"D.",
""
]
]
|
physics/0008130 | Roberto Corsini | R. Corsini, A. Ferrari, J.P. Potier, L. Rinolfi, T. Risselada, P.
Royer (CERN, Switzerland) | A Low Charge Demonstration of Electron Pulse Compression for the CLIC RF
Power Source | 3 pages, 5 figures, submitted to the LINAC 2000 Conference | eConf C000821 (2000) MOA05 | null | null | physics.acc-ph | null | The CLIC (Compact Linear Collider) RF power source is based on a new scheme
of electron pulse compression and bunch frequency multiplication using
injection by transverse RF deflectors into an isochronous ring. In this paper,
we describe the modifications needed in the present LEP Pre-Injector (LPI)
complex at CERN in order to perform a low-charge test of the scheme. The design
of the injector (including the new thermionic gun), of the modified linac, of
the matched injection line, and of the isochronous ring lattice, are presented.
The results of preliminary isochronicity measurements made on the present
installation are also discussed.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 07:24:26 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Corsini",
"R.",
"",
"CERN, Switzerland"
],
[
"Ferrari",
"A.",
"",
"CERN, Switzerland"
],
[
"Potier",
"J. P.",
"",
"CERN, Switzerland"
],
[
"Rinolfi",
"L.",
"",
"CERN, Switzerland"
],
[
"Risselada",
"T.",
"",
"CERN, Switzerland"
],
[
"Royer",
"P.",
"",
"CERN, Switzerland"
]
]
|
physics/0008132 | Daniel Schulte | D. Schulte, I. Syratchev | Beam Loading Compensation in the Main Linac of CLIC | LINAC 2000, paper ID MOA04 | eConf C000821 (2000) MOA04 | null | CERN/PS 2000-050 (AE) | physics.acc-ph | null | Compensation of multi-bunch beam loading is of great importance in the main
linac of the Compact Linear Collider (CLIC). The bunch-to-bunch energy
variation has to stay below 1 part in 1000. In CLIC, the RF power is obtained
by decelerating a drive beam which is formed by merging a number of short bunch
trains. A promising scheme for tackling beam loading in the main linac is based
on varying the lengths of the bunch trains in the drive beam. The scheme and
its expected performance are presented.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 07:51:40 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Schulte",
"D.",
""
],
[
"Syratchev",
"I.",
""
]
]
|
physics/0008133 | Takayuki Imai | T. Imai (1), K. Nakai (1), H. Hayano (2), J. Urakawa (2), N. Terunuma
(2) ((1) Science University of Tokyo, (2) KEK, Ibaraki, Japan) | Double Kicker system in ATF | Linac 2000 proceeding MOA16 | eConf C000821 (2000) MOA16 | null | null | physics.acc-ph | null | A double kicker system which extracts the ultra-low emittance multi-bunch
beam stably from ATF damping ring was developed. The performance of the system
was studied comparing an orbit jitter with single kicker extraction in single
bunch mode. The position jitter reduction was estimated from the analysis of
the extraction orbits. The reduction was confirmed for the double kicker system
within a resolution of BPMs. More precise tuning of the system with a wire
scanner has been tried by changing a beta function at the second kicker to get
more reduction of kick angle jitter. The results of these studies are described
in detail.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 07:52:18 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Imai",
"T.",
"",
"Science University of Tokyo"
],
[
"Nakai",
"K.",
"",
"Science University of Tokyo"
],
[
"Hayano",
"H.",
"",
"KEK, Ibaraki, Japan"
],
[
"Urakawa",
"J.",
"",
"KEK, Ibaraki, Japan"
],
[
"Terunuma",
"N.",
"",
"KEK, Ibaraki, Japan"
]
]
|
physics/0008135 | Gerald Hutter | G. Hutter, W. Gutowski, W. Hartmann, G. Kube, M. Pilz, W. Vinzenz | The RF-System of the New Gsi High Current Linac Hsithe RF-System of the
New Gsi High Current Linac Hsi | Linac Contribution Poster THE05 | eConf C000821 (2000) THE05 | null | null | physics.acc-ph | null | The RF part of the new high current injector-linac HSI consists of five
cavities with the new operating frequency of 36 MHz instead of 27 MHz of the
removed Wideroe type injector. The calculated power requirements of the
cavities including beam load in three structures were between 110 kW for a
rebuncher and 1.75 MW pulse-power for the two IH-cavities. The beam load is up
to 150 kW for the RFQ and up to 750 kW for the two drift tube tanks. An
additional 36 MHz debuncher in the transfer line to the Synchrotron (SIS) will
need 120 kW pulse power. We decided to fulfil these demands with amplifiers of
only two power classes, namely three amplifiers with 2 MW and six amplifiers
with 200 kW pulse output power. The latter ones are also used as drivers for
the 2 MW stages. The 200 kW amplifiers were specified in detail by GSI and
ordered in the industry. The three 2 MW final amplifiers were designed,
constructed and built by GSI. The paper gives an overview of the complete RF
system and the operating performance of amplitude and phase control with beam
load. It further describes some specialities of the new 2 MW amplifiers like
the simplicity of the anode circuit, a very sophisticated socket for a cathode
driven amplifier with cathode on dc ground, the parasitic mode-suppression,
shielding and filtering of unallowable RF-radiation and operating experience
since October 1999.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 08:48:53 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Hutter",
"G.",
""
],
[
"Gutowski",
"W.",
""
],
[
"Hartmann",
"W.",
""
],
[
"Kube",
"G.",
""
],
[
"Pilz",
"M.",
""
],
[
"Vinzenz",
"W.",
""
]
]
|
physics/0008136 | Winfried Barth | W. Barth, P. Forck, J. Glatz, W. Gutowski, G. Hutter, J. Klabunde, R.
Schwedhelm, P. Strehl, W. Vinzenz, D. Wilms, U. Ratzinger | Commissioning of Ih-RFQ and Ih-DTL for the Gsi High Current Linac | Linac 2000, MOD11, 3 pages, 4 figures | eConf C000821 (2000) MOD11 | null | null | physics.acc-ph | null | The new 1.4 MeV/u front end HSI (HochStromInjektor) of the Unilac accelerates
ions with A/q ratios of up to 65 and with beam intensities in emA of up to 0.25
A/q. The maximum beam pulse power is up to 1300 kW. During the stepwise linac
commissioning from April to Septem-ber 1999 the beam behind of each cavity was
analysed within two weeks. A very stable Ar1+ beam out of a vol-ume plasma
source MUCIS was used mainly. The meas-ured norm. 80 % emittance areas around
0.45 pi mm mrad are close to the results from beam simulations. Up to 80 % of
the design intensity at the linac exit were achieved. In February 2000 an U4+
beam from the MEVVA source was accelerated for the first time.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 09:05:16 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Barth",
"W.",
""
],
[
"Forck",
"P.",
""
],
[
"Glatz",
"J.",
""
],
[
"Gutowski",
"W.",
""
],
[
"Hutter",
"G.",
""
],
[
"Klabunde",
"J.",
""
],
[
"Schwedhelm",
"R.",
""
],
[
"Strehl",
"P.",
""
],
[
"Vinzenz",
"W.",
""
],
[
"Wilms",
"D.",
""
],
[
"Ratzinger",
"U.",
""
]
]
|
physics/0008137 | Painchault | M Painchault, J Gaiffier, C Chauvin | Main steps for the fabrication of IPHI RFQ | 3 pages, 4 figures | eConf C000821 (2000) THD03 | null | null | physics.acc-ph | null | The RFQ of the project IPHI is a 8 meter long, high power, very precise
tolerances (0.01 mm on 1 meter long for example) device to accelerate protons.
This RFQ is similar to the RFQ of the LEDA project. So, we realize a thermal
and mechanical studies followed by different tests for machining and brazing
copper. We describe in this paper those different steps and the way we proceed
to supply the fabrication itself by an independent company.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 09:17:27 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Painchault",
"M",
""
],
[
"Gaiffier",
"J",
""
],
[
"Chauvin",
"C",
""
]
]
|
physics/0008139 | Arup Banerjee | Arup Banerjee and Manoj K. Harbola | Frequency dependent hyperpolarizabilities of atoms; calculations using
density-functional theory | 13 pages of text and 7 figures | null | null | null | physics.atom-ph | null | Using the orbitals generated by the van Leeuwen-Baerends potential, we
calculate frequency dependent response properties of noble gas atoms of He, Ne
and Ar and alkaline earth atoms Be and Mg, with particlar emphasis on their
nonlinear polarizabilities. For this we employ time-dependent Kohn-Sham
formalism with adiabatic local-density aproximation (ALDA) for exchange and
correlation. We show that results thus obtained for frequency dependent
polarizabilities of the inert gas atoms are highly acurate. On the other hand,
polarizabilities of the alkaline earths are not given with the same accuracy.
In light of this, we make an assessment of ALDA for obtaining linear and
nonlinear response properties by employing time-dependent density-functional
theory.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 10:11:17 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Banerjee",
"Arup",
""
],
[
"Harbola",
"Manoj K.",
""
]
]
|
physics/0008140 | Jang-Min Han | J.M. Han, et al | A 3.0mev Komac/KTF RFQ Linac | 6 figures inline of text, higher resolution or color version of all
figures seperately listed as jpg files. Linac 2000 Conference Paper ID No.
TUD01 | eConf C000821 (2000) TUD01 | null | null | physics.acc-ph | null | The Radio-Frequency Quadrupole (RFQ) linac that will accelerate a 20mA proton
beam from 50keV to 3MeV has been designed and is being fabricated as the first
phase, KOMAC Test Facility (KTF), of the Korea Multipurpose Accelerator Complex
(KOMAC) project at the Korea Atomic Energy Research Institute (KAERI). The
physical, engineering designs and fabrication status of the RFQ are described.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 10:56:33 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Han",
"J. M.",
""
]
]
|
physics/0008142 | Maurizio Vretenar | M. Vretenar (for the SPL Study Group) | A High-Intensity H- Linac at CERN Based on LEP-2 Cavities | Linac2000, paper TU206 | eConf C000821 (2000) TU206 | null | TU206 | physics.acc-ph | null | In view of a possible evolution of the CERN accelerator complex towards
higher proton intensities, a 2.2 GeV H- linac with 4 MW beam power has been
designed, for use in connection with an accumulator and compressor ring as
proton driver of a muon-based Neutrino Factory. The high-energy part of this
linac can use most of the RF equipment (superconducting cavities and klystrons)
from the LEP collider after its decommissioning at the end of 2000. Recent
results concerning low-beta superconducting cavities are presented, and the
main characteristics of the linac design are described. The complete
linac-based proton driver facility is outlined, and the impact on the linac
design of the requirements specific to a Neutrino Factory is underlined.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 11:50:04 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Vretenar",
"M.",
"",
"for the SPL Study Group"
]
]
|
physics/0008143 | Raphael Gobin | R. Gobin, P-Y. Beauvais, O. Delferriere, R. Ferdinand, F. Harrault,
J-M. Lagniel | An ECR hydrogen negative ion source at CEA/Saclay: preliminary results | 3 pages, 3 figures, LINAC 2000 MOD07 | eConf C000821 (2000) MOD07 | null | null | physics.acc-ph | null | The development of a high intensity negative ion source is part of a
considerably larger activity presently undergoing at CEA Saclay in the field of
high intensity linear accelerators. Preliminary studies toward the construction
of a 2.45 GHz ECR H- ion source have been performed for few months. This new
test bench takes advantage of our experience on the French high intensity
proton source SILHI. In the new source, the high-energy electrons created in
the ECR zone are trapped by a dipole magnetic filter. A rectangular 200 mm long
plasma chamber and an intermediate iron shield are used to minimize the
magnetic field in the extraction region. A second magnetic filter separates
electrons and negative ions in a 10 kV extraction system. To reduce the
electron/H- ratio, the plasma electrode is slightly polarized. The design
allows future evolutions such as cesium injection, higher energy extraction and
plasma diagnostics. The installation of the source is now in progress. The
first helium plasma has been produced for few weeks to verify the electron
separator behavior. The design, computations and the first results of the
source are presented.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 13:00:21 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Gobin",
"R.",
""
],
[
"Beauvais",
"P-Y.",
""
],
[
"Delferriere",
"O.",
""
],
[
"Ferdinand",
"R.",
""
],
[
"Harrault",
"F.",
""
],
[
"Lagniel",
"J-M.",
""
]
]
|
physics/0008144 | Robin Ferdinand | R. Duperrier, R. Ferdinand, P. Gros, J-M. Lagniel, N. Pichoff, D.
Uriot, CEA-Saclay, DSM-DAPNIA-SEA | Design of the Ess RFQs and Chopping Line | 3 pages, LINAC 2000, TUD03 | eConf C000821 (2000) TUD03 | null | null | physics.acc-ph | null | The chopping line is a critical part of the ESS linac in term of technical
realisation of the choppers and preservation of the beam qualities. A new
optimised design of the ESS RFQs and chopping lines is reported. The beam
dynamics has been optimised with H- beam currents up to 100-mA to have safety
margin with respect to the ESS goals. The first RFQ transmits almost 99.7% of
the beam up to 2 MeV. The line with two choppers allows a perfect chopping
between 2 bunches. The second RFQ accelerates the particles up to 5 MeV with a
transmission close to 100%.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 14:02:38 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Duperrier",
"R.",
""
],
[
"Ferdinand",
"R.",
""
],
[
"Gros",
"P.",
""
],
[
"Lagniel",
"J-M.",
""
],
[
"Pichoff",
"N.",
""
],
[
"Uriot",
"D.",
""
],
[
"CEA-Saclay",
"",
""
],
[
"DSM-DAPNIA-SEA",
"",
""
]
]
|
physics/0008145 | Robin Ferdinand | R. Ferdinand, P-Y. Beauvais, R. Duperrier, A. France, J. Gaiffier,
J-M. Lagniel, M. Painchault, F. Simoens, CEA-Saclay, DSM-DAPNIA-SEA, P.
Balleyguier, CEA-Bruyeres le Chatel, DAM | Status Report on the 5 Mev Iphi RFQ | 3 pages, LINAC 2000 | eConf C000821 (2000) TUD04 | null | null | physics.acc-ph | null | A 5-MeV RFQ designed for a proton current up to 100-mA CW is now under
construction as part of the High Intensity Proton Injector project (IPHI). Its
computed transmission is greater than 99 %. The main goals of the project are
to verify the accuracy of the design codes, to gain the know-how on
fabrication, tuning procedures and operations, to measure the output beam
characteristics in order to optimise the higher energy part of the linac, and
to reach a high availability with minimum beam trips. A cold model has been
built to develop the tuning procedure. The present status of the IPHI RFQ is
presented.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 14:13:16 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Ferdinand",
"R.",
""
],
[
"Beauvais",
"P-Y.",
""
],
[
"Duperrier",
"R.",
""
],
[
"France",
"A.",
""
],
[
"Gaiffier",
"J.",
""
],
[
"Lagniel",
"J-M.",
""
],
[
"Painchault",
"M.",
""
],
[
"Simoens",
"F.",
""
],
[
"CEA-Saclay",
"",
""
],
[
"DSM-DAPNIA-SEA",
"",
""
],
[
"Balleyguier",
"P.",
""
],
[
"Chatel",
"CEA-Bruyeres le",
""
],
[
"DAM",
"",
""
]
]
|
physics/0008147 | Carlo Rossi | G. D'Auria, C. Rossi, M. Danailov, M. Ferrario, N. Piovella, L.
Serafini | The FaBrE Project at Trieste | LINAC2000 poster MOB07, 3 pages, 4 figures | eConf C000821 (2000) MOB07 | null | null | physics.acc-ph | null | A program to design a high brilliance electron source suitable for a short
wavelength Linac-based FEL is presented. The goal of the project is to develop
a multi-cell integrated photoinjector capable of delivering 1 nC bunches with
emittance below 1 mm mrad. This will be the first step toward a possible
development of a IV generation light source test facility based on the existing
Trieste Linac. For this purpose a common program between Sincrotrone Trieste
and INFN-Milano has been undertaken. Here a brief description of the program
and the first results of the RF Gun electromagnetic structure with the beam
dynamics on the ELETTRA Linac are presented.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 14:40:02 GMT"
},
{
"version": "v2",
"created": "Tue, 22 Aug 2000 23:06:50 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"D'Auria",
"G.",
""
],
[
"Rossi",
"C.",
""
],
[
"Danailov",
"M.",
""
],
[
"Ferrario",
"M.",
""
],
[
"Piovella",
"N.",
""
],
[
"Serafini",
"L.",
""
]
]
|
physics/0008148 | Bernhard Schlitt | B. Schlitt, A. Bechtold, U. Ratzinger, A. Schempp | Design of the 7 MeV/u, 217 MHz Injector Linac for the Proposed Ion Beam
Facility for Cancer Therapy at the Clinic in Heidelberg | Contribution to the LINAC2000 Proceedings, Paper ID: MOD10 | eConf C000821 (2000) MOD10 | null | null | physics.acc-ph | null | A dedicated clinical synchrotron facility for cancer therapy using energetic
proton and ion beams (C, He and O) has been designed at GSI for the
Radiologische Universitaetsklinik at Heidelberg, Germany. The design of the
injector linac is presented. Suitable ion sources are discussed and results of
ion source test measurements are reported. The LEBT allows for switching
between two ion sources. A short RFQ accelerates the ions from 8 keV/u to 400
keV/u. It is followed by a very compact beam matching section and a 3.8 m long
IH-type drift tube linac for the acceleration to 7 MeV/u. Both rf structures
are designed for a resonance frequency of 216.816 MHz and for ion
mass-to-charge ratios up to A/q = 3 (12C4+, (H_3)+, 3He+, 16O6+).
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 14:48:07 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Schlitt",
"B.",
""
],
[
"Bechtold",
"A.",
""
],
[
"Ratzinger",
"U.",
""
],
[
"Schempp",
"A.",
""
]
]
|
physics/0008150 | C. Vermare | C. Vermare, D. C. Moir and G. J. Seitz | Optical Transition Radiation (OTR) Measurements of an Intense Pulsed
Electron Beam | 3 pages, 7 figures | eConf C000821 (2000) MOc16 | null | LA-UR-00-2064 | physics.acc-ph physics.ins-det | null | We present the first time resolved OTR angular distribution measurements of
an intense pulsed electron beam (1.7 kA, 60 ns). These initial experiments on
the first axis of the Dual Axis Radiographic Hydro-Testing (DARHT) facility and
subsequent analysis, demonstrate the possibility to extract, from the data, the
energy and the divergence angle of a 3.8 and 20 MeV electrons.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 15:25:07 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Vermare",
"C.",
""
],
[
"Moir",
"D. C.",
""
],
[
"Seitz",
"G. J.",
""
]
]
|
physics/0008151 | Jong-Seok Oh | J. S. Oh, J. S. Bak, M. H. Cho, W. Namkung (PAL, Korea) K. H. Chung
(SNU, Korea) T. Shintake, H. Matsumoto(KEK, Japan) | Development of a Smart Modulator and Efficiency Evaluation of 500-GeV
e+e- C-Band Linear Collider | 3 pages, 4 figures, Linac2000 paper ID No. THA12 file= THA12.pdf | eConf C000821 (2000) THA12 | null | null | physics.acc-ph | null | An e+e- linear collider at 500-GeV C.M. (center of mass) has been proposed as
a future accelerator. The C-band linear collider has more than a thousand
klystrons and matching modulators. The linear colliders require smart
modulators with high reliability, compact and simple configuration, and good
power efficiency. This study suggests solutions to problems expected in the
future linear colliders. A C-band smart modulator has been developed using a
constant-current inverter power supply. The smart modulator provides 350-kV
pulses of the pulse-to-pulse stability of 0.35%, the pulse-width of 4.35
microseconds, and the repetition rate of 50 Hz. We also investigated the power
efficiency for the C-band scheme. A pulse efficiency of 75% can be achieved by
an optimized pulse transformer and the RF phase modulation. With pulsed
klystrons of 60% power efficiency, it is possible to achieve the RF system
efficiency of 32% with the wall-plug power of 170 MW.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 15:33:14 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Oh",
"J. S.",
"",
"PAL, Korea"
],
[
"Bak",
"J. S.",
"",
"PAL, Korea"
],
[
"Cho",
"M. H.",
"",
"PAL, Korea"
],
[
"Namkung",
"W.",
"",
"PAL, Korea"
],
[
"Chung",
"K. H.",
"",
"SNU, Korea"
],
[
"Shintake",
"T.",
"",
"KEK, Japan"
],
[
"Matsumoto",
"H.",
"",
"KEK, Japan"
]
]
|
physics/0008153 | Lawrence I. Donley | L.I. Donley, V.F. Stipp, F. R. Brumwell, G. E. McMichael | Reliability History and Improvements to the ANL 50 MEV H- Accelerator | 3 pages, 1 figure | eConf C000821 (2000) TUD20 | null | TUD20 | physics.acc-ph | null | The H- Accelerator consists of a 750 keV Cockcroft Walton preaccelerator and
an Alvarez type 50 MeV linac. The accelerator has been in operation since 1961.
Since 1981, it has been used as the injector for the Intense Pulsed Neutron
Source (IPNS), a national user facility for neutron scattering. The linac
delivers about 3.5x1012 H- ions per pulse, 30 times per second (30 Hz), for
multi-turn injection to a 450 MeV Rapid Cycling Synchrotron (RCS). IPNS
presently operates about 4,000 hours per year, and operating when scheduled is
critical to meeting the needs of the user community. For many years the IPNS
injector/RCS has achieved an average reliability of 95%, helped in large part
by the preaccelerator/linac which has averaged nearly 99%. To maintain and
improve system reliability, records need to show what each subsystem
contributes to the total down time. The history of source and linac subsystem
reliability, and improvements that have been made to improve reliability, will
be described. Plans to maintain or enhance this reliability for at least
another ten years of operation, will also be discussed.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 16:00:10 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Donley",
"L. I.",
""
],
[
"Stipp",
"V. F.",
""
],
[
"Brumwell",
"F. R.",
""
],
[
"McMichael",
"G. E.",
""
]
]
|
physics/0008155 | Anatoly V. Titov | A.V.Titov, N.S.Mosyagin, A.B.Alekseyev, and R.J.Buenker | GRECP/MRD-CI calculations of the spin-orbit splitting in the ground
state of Tl and of the spectroscopic properties of TlH | 20 pages, latex, no figures, more comutational details are available
at at http://www.QChem.PNPI.SPb.Ru | null | null | null | physics.chem-ph | null | The generalized relativistic effective core potential (GRECP) approach is
employed in the framework of multireference single- and double-excitation
configuration interaction (MRD-CI) method to calculate the spin-orbit (SO)
splitting in the $^2P^o$ ground state of the Tl atom and spectroscopic
constants for the $0^+$ ground state of TlH. The 21-electron GRECP for Tl is
used and the outer core 5s and 5p pseudospinors are frozen with the help of the
level shift technique. The spin-orbit selection scheme with respect to
relativistic multireference states and the corresponding code are developed and
applied in the calculations. In this procedure both correlation and spin-orbit
interactions are taken into account. A [4,4,4,3,2] basis set is optimized for
the Tl atom and employed in the TlH calculations. Very good agreement is found
for the equilibrium distance, vibrational frequency, and dissociation energy of
the TlH ground state ($R_e=1.870 \AA, \omega_e=1420 cm^{-1}, D_e=2.049 eV$) as
compared with the experimental data ($R_e=1.868 \AA, \omega_e=1391 cm^{-1},
D_e=2.06 eV$).
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 17:47:07 GMT"
},
{
"version": "v2",
"created": "Thu, 26 Oct 2000 17:52:17 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Titov",
"A. V.",
""
],
[
"Mosyagin",
"N. S.",
""
],
[
"Alekseyev",
"A. B.",
""
],
[
"Buenker",
"R. J.",
""
]
]
|
physics/0008156 | Henry L. Rutkowski | HL Rutkowski, LL Reginato, WL Waldron, KP Chow, MC Vella, WM Fawley, R
Briggs, S Nelson, Z Wolf, and D Birx | The DARHT Phase 2 Linac | 3 pgs, 3 figs | eConf C000821 (2000) TUB08 | null | null | physics.acc-ph | null | The second phase accelerator for the Dual Axis Hydrodynamic Test facility
(DARHT) is designed to provide an electron beam pulse that is 2 microsec long,
2kA, and 20 MeV in particle energy. The injector provides 3.2 MeV so that the
linac need only provide 16.8 MeV. The linac is made with two types of induction
accelerator cells. The first block of 8 cells have a 14 in. beam pipe compared
to 10 in. in the remaining 80 cells. The other principal difference is that the
first 8 cells have reduced volt-sec in their induction cores as a result of a
larger diameter beam pipe. The cells are designed for very reliable high
voltage operation. The insulator is Mycalex. Results from prototype tests are
given including results from solenoid measurements. Each cell contains a
solenoid for beam transport and a set of x-y correction coils to reduce
corkscrew motion. Details of tests to determine RF mode impedances relevant to
BBU generation are given. Blocks of cells are separated by "intercells" some of
which contain transport solenoids. The intercells provide vacuum pumping
stations as well. Issues of alignment and installation are discussed.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 20:57:20 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Rutkowski",
"HL",
""
],
[
"Reginato",
"LL",
""
],
[
"Waldron",
"WL",
""
],
[
"Chow",
"KP",
""
],
[
"Vella",
"MC",
""
],
[
"Fawley",
"WM",
""
],
[
"Briggs",
"R",
""
],
[
"Nelson",
"S",
""
],
[
"Wolf",
"Z",
""
],
[
"Birx",
"D",
""
]
]
|
physics/0008158 | Dr. Lloyd M. Young | L. M. Young (1), L. J. Rybarcyk (1), J. D. Schneider (1), M. E.
Schulze (2), and H. V. Smith (1) ((1) Los Alamos National Laboratory,
(2)General Atomics) | High Power Operations of LEDA | 5 pages, 5 figures, submitted to the LINAC 2000 Conference, Paper
TU201 | eConf C000821 (2000) TU201 | null | LA-UR- 00-3650 | physics.acc-ph | null | The LEDA RFQ, a 350-MHz continuous wave (CW) radio-frequency quadrupole
(RFQ), successfully accelerated a 100-mA CW proton beam from 75 keV to 6.7 MeV.
We have accumulated 111 hr of beam on time with at least 90 mA of CW output
beam current. The 8-m-long RFQ accelerates a dc, 75-keV, ~106-mA H+ beam from
the LEDA injector with ~94% transmission. When operating the RFQ at the RF
power level for which it was designed, the peak electrical field on the vane
tips is 33 MV/m. However, to maintain the high transmission quoted above with
the CW beam, it was necessary to operate the RFQ with field levels ~10% higher
than design. The RFQ dissipates 1.5 MW of RF power when operating with this
field. Three klystrons provide the 2.2 MW of RF power required by the RFQ to
accelerate the 100-mA beam. The beam power is 670 kW. Some of the challenges
that were met in accelerating a 100-mA CW proton beam to 6.7 MeV, will be
discussed.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 18:34:07 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Young",
"L. M.",
""
],
[
"Rybarcyk",
"L. J.",
""
],
[
"Schneider",
"J. D.",
""
],
[
"Schulze",
"M. E.",
""
],
[
"Smith",
"H. V.",
""
]
]
|
physics/0008159 | Patrick L. Colestock | P. L. Colestock, T. Wangler, C. K. Allen, R. L. Sheffield, D.
Gilpatrick(the Diagnostics Group), M. Thuot(the Controls Group), the LEDA
Operations Team, M. Schulze and A. Harvey | The Beam Halo Experiment at the LEDA Facility | Submitted to Linac2000, Monterey, Aug. 21st-25th, 2000 | eConf C000821 (2000) THB07 | null | null | physics.acc-ph | null | Due to the potentially adverse effects of the generation of halo particles in
intense proton beams, it is imperative to have a clear understanding of the
mechanisms that can lead to halo formation for current and proposed high-
intensity linacs. To this end a theoretical model has been developed, which
indicates that protons under the combined influence of strong space charge
forces and periodic focussing in a linear transport channel can be kicked into
halo orbits. However, no experimental measurements of beam halo in proton beams
have yet been carried out. In this paper we report the progress of an effort to
carry out an experiment to measure beam-halo using the existing high- intensity
proton beam of the LEDA facility. A linear transport channel has been assembled
with the appropriate diagnostics for measuring the expected small beam
component in the beam halo as a function of beam parameters. The experiment is
based on the use of an array of high-dynamic-range wire and beam scrapers to
determine the halo and core profiles along the transport channel. Details of
the experimental design, the expected halo measurement properties will be
presented.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 18:33:47 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Colestock",
"P. L.",
"",
"the Diagnostics Group"
],
[
"Wangler",
"T.",
"",
"the Diagnostics Group"
],
[
"Allen",
"C. K.",
"",
"the Diagnostics Group"
],
[
"Sheffield",
"R. L.",
"",
"the Diagnostics Group"
],
[
"Gilpatrick",
"D.",
"",
"the Diagnostics Group"
],
[
"Thuot",
"M.",
"",
"the Controls Group"
],
[
"Team",
"the LEDA Operations",
""
],
[
"Schulze",
"M.",
""
],
[
"Harvey",
"A.",
""
]
]
|
physics/0008160 | Anatoly V. Titov | A.V.Titov and N.S.Mosyagin | Generalized Relativistic Effective Core Potential Method: Theory and
calculations | 22 pages, latex, no figures | null | null | null | physics.chem-ph physics.atom-ph physics.comp-ph | null | In calculations of heavy-atom molecules with the shape-consistent
Relativistic Effective Core Potential (RECP), only valence and some outer-core
shells are treated explicitly, the shapes of spinors are smoothed in the atomic
core regions and the small components of four-component spinors are excluded
from calculations. Therefore, the computational efforts can be dramatically
reduced.
However, in the framework of the standard nodeless radially local RECP
versions, any attempt to extend the space of explicitly treated electrons more
than some limit does not improve the accuracy of the calculations. The errors
caused by these (nodeless) RECPs can range up to 2000 $cm^{-1}$ and more for
the dissociation and transition energies even for lowest-lying excitations that
can be unsatisfactory for many applications. Moreover, the direct calculation
of such properties as electronic densities near heavy nuclei, hyperfine
structure, and matrix elements of other operators singular on heavy nuclei is
impossible as a result of the smoothing of the orbitals in the core regions.
In the present paper, ways to overcome these disadvantages of the RECP method
are discussed. The developments of the RECP method suggested by the authors are
studied in many precise calculations of atoms and of the TlH, HgH molecules.
The technique of nonvariational restoration of electronic structure in cores of
heavy atoms in molecules is applied to calculation of the P,T-odd
spin-rotational Hamiltonian parameters including the weak interaction terms
which break the symmetry over the space inversion (P) and time-reversal
invariance (T) in the PbF, HgF, BaF, and YbF molecules.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 18:58:17 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Titov",
"A. V.",
""
],
[
"Mosyagin",
"N. S.",
""
]
]
|
physics/0008161 | Sung-il Kwon | Sung-il Kwon (1), Yi-Ming Wang (1), Amy Regan (1), Tony Rohlev (1),
Mark Prokop (2), Dave Thomson (2) ((1) LANL, (2)Honeywell FM&T) | SNS Superconducting Cavity Modeling -Iterative Learning Control | For Linac2000, Paper ID TUC13, 3 pages, 3 figures, The summary of the
technical report, LANSCE-5-TN-00-014, Los Alamos Nation Lab., July, 2000 | eConf C000821 (2000) TUc13 | null | null | physics.acc-ph | null | The SNS SRF system is operated with a pulsed beam. For the SRF system to
track the repetitive reference trajectory, a feedback and a feedforward
controllers has been proposed. The feedback controller is to guarantee the
closed loop system stability and the feedforward controller is to improve the
tracking performance for the repetitive reference trajectory and to suppress
the repetitive disturbance. As the iteration number increases, the error
decreases.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 20:55:04 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Kwon",
"Sung-il",
"",
"LANL"
],
[
"Wang",
"Yi-Ming",
"",
"LANL"
],
[
"Regan",
"Amy",
"",
"LANL"
],
[
"Rohlev",
"Tony",
"",
"LANL"
],
[
"Prokop",
"Mark",
"",
"Honeywell FM&T"
],
[
"Thomson",
"Dave",
"",
"Honeywell FM&T"
]
]
|
physics/0008162 | Rami A. Kishek | R. A. Kishek, P. G. O'Shea, and M. Reiser | Energy Transfer Mechanisms and Equipartitioning in non-Equilibrium
Space- Charge-Dominated Beams | LINAC 2000 Conference Proceedings Paper ID: MOE19 3 pages, 3 figures | eConf C000821 (2000) MOE19 | null | null | physics.acc-ph physics.comp-ph | null | A process of energy transfer is demonstrated in non-equilibrium charged
particle beams with anisotropy and space charge. Equipartitioning of energy
between available degrees of freedom occurs in just a few betatron wavelengths,
without halo formation. Collective space charge modes similar to those observed
in recent experiments provide the underlying coupling mechanism. Since
laboratory beams are commonly far from equilibrium, the traditional K-V
stability analysis does not necessarily apply, implying that selection of an
operating point based on theory does not necessarily avoid equipartitioning.
Furthermore, the rate of equipartitioning is shown to depend on a single free
parameter related space charge content of the final (equipartitioned) beam, and
does not depend on how the kinetic energy is initially distributed between the
two planes.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 20:06:07 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Kishek",
"R. A.",
""
],
[
"O'Shea",
"P. G.",
""
],
[
"Reiser",
"M.",
""
]
]
|
physics/0008163 | Yi-Ming Wang | Y.M. Wang, S.I. Kwon, and A.H. Regan | Analysis and Synthesis of the SNS Superconducting RF Control System | LINAC2000, TUC16 | eConf C000821 (2000) TUc16 | null | null | physics.acc-ph physics.ins-det | null | The RF system for the SNS superconducting linac consists of a superconducting
cavity, a klystron, and a low-level RF (LLRF) control system. For a proton
linac like SNS, the field in each individual cavity needs to be controlled to
meet the overall system requirements. The purpose of the LLRF control system is
to maintain the RF cavity field to a desired magnitude and phase by controlling
the klystron driver signal. The Lorentz force detuning causes the shift of the
resonant frequency during the normal operation in the order of a few hundreds
hertz. In order to compensate the Lorentz force detuning effects, the cavity is
pre-tuned into the middle of the expected frequency shift caused by the Lorentz
force detuning. Meanwhile, to reduce the overshoot in the transient response, a
feed-forward algorithm, a linear parameter varying gain scheduling (LPV-GS)
controller, is proposed to get away a repetitive noised caused by the pulsed
operation as well as the Lorentz force detuning effects.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 20:55:26 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Wang",
"Y. M.",
""
],
[
"Kwon",
"S. I.",
""
],
[
"Regan",
"A. H.",
""
]
]
|
physics/0008164 | YounJoon Jung | Y. Jung, R. J. Silbey, and J. Cao | Electronic coherence in mixed-valence systems: Spectral analysis | 24 pages, 11 figures | J. Phys. Chem.A, vol.103, 9460-9468 (1999) | null | null | physics.chem-ph cond-mat.stat-mech | null | The electron transfer kinetics of mixed-valence systems is studied via
solving the eigen-structure of the two-state non-adiabatic diffusion operator
for a wide range of electronic coupling constants and energy bias constants.
The calculated spectral structure consists of three branches in the
eigen-diagram, a real branch corresponding to exponential or multi-exponential
decay and two symmetric branches corresponding to population oscillations
between donor and acceptor states. The observed electronic coherence is shown
as a result of underdamped Rabi oscillations in an overdamped solvent
environment. The time-evolution of electron population is calculated by
applying the propagator constructed from the eigen-solution to the
non-equilibrium initial preparation, and it agrees perfectly with the result of
a direct numerical propagation of the density matrix. The resulting population
dynamics confirms that increasing the energy bias destroys electronic
coherence.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 21:56:14 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Jung",
"Y.",
""
],
[
"Silbey",
"R. J.",
""
],
[
"Cao",
"J.",
""
]
]
|
physics/0008165 | Timothy L. Houck | G. Guethlein, T. Houck, J. McCarrick, and S. Sampayan (LLNL) | Faraday Cup Measurements of Ions Backstreaming into a Electron Beam
Impinging on a Plasma Plume* | TUB14 LINAC 2000 | eConf C000821 (2000) TUB14 | null | UCRL-JC-138397 | physics.acc-ph | null | The next generation of radiographic machines based on induction accelerators
is expected to generate multiple, small diameter x-ray spots of high intensity.
Experiments to study the interaction of the electron beam with plasmas
generated at the x-ray converter and at beamline septa are being performed at
the Lawrence Livermore National Laboratory (LLNL) using the 6-MeV, 2-kA
Experimental Test Accelerator (ETA) electron beam. The physics issues of
concern can be separated into two categories. The interaction of subsequent
beam pulses with the expanding plasma plume generated by earlier pulses
striking the x-ray converter or a septum, and the more subtle effect involving
the extraction of light ions from a plasma by the head of the beam pulse. These
light ions may be due to contaminants on the surface of the beam pipe or
converter, or, for subsequent pulses, in the material of the converter. The
space charge depression of the beam could accelerate the light ions to
velocities of several mm/ns. As the ions moved through the body of the incoming
pulse, the beam would be pinched resulting in a moving focus prior to the
converter and a time varying x-ray spot. Studies of the beam-generated plasma
at the x-ray converter have been previously reported. In this paper we describe
Faraday cup measurements performed to detect and quantify the flow of
backstreaming ions as the ETA beam pulse impinges on preformed plasma.
* This work was performed under the auspices of the U.S. Department of Energy
by University of California Lawrence Livermore National Laboratory under
contract No. W-7405-Eng-48.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 23:36:35 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Guethlein",
"G.",
"",
"LLNL"
],
[
"Houck",
"T.",
"",
"LLNL"
],
[
"McCarrick",
"J.",
"",
"LLNL"
],
[
"Sampayan",
"S.",
"",
"LLNL"
]
]
|
physics/0008166 | Christine M. Celata | C.M. Celata | Overview of the Heavy Ion Fusion Program | 5 pages, 2 figures | eConf C000821 (2000) WE202 | null | LBNL-46555 | physics.acc-ph | null | The world Heavy Ion Fusion (HIF) Program for inertial fusion energy is
looking toward the development and commissioning of several new experiments.
Recent and planned upgrades of the facilities at GSI, in Russia, and in Japan
greatly enhance the ability to study energy deposition in hot dense matter.
Worldwide target design developments have focused on non-ignition targets for
nearterm experiments and designs which, while lowering the energy required for
ignition, tighten accelerator requirements. The U.S program is transitioning
between scaled beam dynamics experiments and high current experiments with
power-plant-driver-scale beams. Current effort is aimed at preparation for the
next-step large facility, the Integrated Research Experiment (IRE)-- an
induction linac accelerating multiple beams to a few hundred MeV, then focusing
to deliver tens of kilojoules to a target. The goal is to study heavy ion
energy deposition, and to test all of the components and physics needed for an
engineering test of a power plant driver and target chamber. This paper will
include an overview of the Heavy Ion Fusion program abroad and a more in-depth
view of the progress and plans of the U.S. program.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 23:29:19 GMT"
},
{
"version": "v2",
"created": "Wed, 23 Aug 2000 21:56:13 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Celata",
"C. M.",
""
]
]
|
physics/0008167 | Karl Bane | K. L. F. Bane and Z. Li | Dipole Mode Detuning in the NLC Injector Linacs | 3 pages, 4 figures, 1 cls file | eConf C000821 (2000) TUA06 | null | SLAC-PUB-8545 | physics.acc-ph | null | The injector linacs of the JLC/NLC comprise the e+ booster, the e- drive
linac, the e+ booster, and the two prelinacs. These four systems together
transport the two types of beams from the 80 MeV point at the end of their
respective bunchers up to the storage rings, and then from the storage rings to
the 10 GeV point at the beginning of the bunch compressors. Nominally, the e+
booster structure will be L-band and the others S-band. In transport through
these linacs it is important that the emittances and particle losses stay
within specified tolerances. In particular, the effects of the dipole
wakefield-especially the long-range dipole wakefield-need to be carefully
considered. We present designs of the injector linac structures that employ
simple mode detuning, without damping, and that allow us to satisfy our
tolerance requirements, for both the nominal (2.8 ns) and alternate (1.4 ns)
bunch spacing options.
| [
{
"version": "v1",
"created": "Sat, 19 Aug 2000 02:32:58 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Bane",
"K. L. F.",
""
],
[
"Li",
"Z.",
""
]
]
|
physics/0008168 | Stanislav Vinogradov | A.I.Dzergatch and S.V.Vinogradov | Collective Acceleration of Ions by Means of Plasmoids in RF Wells of
Frequency-Modulated Laser Field | LINAC 2000 conference report. 3 pages, 4 figures | eConf C000821 (2000) THc14 | null | null | physics.acc-ph physics.comp-ph | null | The proposed linear accelerator ("scanator") consists of a terawatt table-top
laser and a set of passive elements - beam splitters, dispersion elements for
stretching of the laser pulse and chirping of the splitted beams, and
dispersion elements for angle scanning of crossed frequency-modulated laser
beams. Ions are trapped and accelerated in RF wells by the electron component
of plasmoids in the intersection zone of the scanning laser beams.
Computational studies give encouraging results. A proof-of-principle experiment
on the base of a table-top laser is outlined.
| [
{
"version": "v1",
"created": "Fri, 18 Aug 2000 23:52:25 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Dzergatch",
"A. I.",
""
],
[
"Vinogradov",
"S. V.",
""
]
]
|
physics/0008169 | Steve P. Virostek | S. Virostek, J. Staples | Analysis of Thermally Induced Frequency Shift for the Spallation Neutron
Source RFQ | 3 pages, Linac 200 Conference, Paper ID THD04 | eConf C000821 (2000) THD04 | null | null | physics.acc-ph | null | The Spallation Neutron Source (SNS) Front-End Systems Group at Lawrence
Berkeley National Lab (LBNL) is developing a Radio Frequency Quadrupole (RFQ)
to accelerate an H- beam from 65 keV to 2.5 MeV at the operating frequency of
402.5 MHz. The 4 section, 3.7 meter long RFQ is a 4 vane structure operating at
6% duty factor. The cavity walls are made from OFE Copper with a GlidCop outer
layer to add mechanical strength. A set of 12 cooling channels in the RFQ
cavity walls are fed and controlled separately from 4 channels embedded in the
vanes. An ANSYS finite-element model has been developed to calculate the
deformed shape of the cavity for given RF heat loads and cooling water
temperatures. By combining the FEA results with a SUPERFISH RF cavity
simulation, the relative shift in frequency for a given change in coolant
temperature or heat load can be predicted. The calculated cavity frequency
sensitivity is -33 kHz per 1 degC change in vane water temperature with
constant-temperature wall water. The system start-up transient was also studied
using the previously mentioned FEA model. By controlling the RF power ramp rate
and the independent wall and vane cooling circuit temperatures, the system
turn-on time can be minimized while limiting the frequency shift.
| [
{
"version": "v1",
"created": "Sat, 19 Aug 2000 00:24:03 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Virostek",
"S.",
""
],
[
"Staples",
"J.",
""
]
]
|
physics/0008171 | Ronald Akre | R. Akre, V. Bharadwaj, P. Emma, P. Krejcik | SLAC Linac RF Performance for LCLS | 3 pages, 2 figures - 4 bit maps, THC11 | eConf C000821 (2000) THc11 | null | SLAC-PUB-8574 | physics.acc-ph | null | The Linac Coherent Light Source (LCLS) project at SLAC uses a dense 15 GeV
electron beam passing through a long undulator to generate extremely bright
x-rays at 1.5 angstroms. The project requires electron bunches with a nominal
peak current of 3.5kA and bunch lengths of 0.020mm (70fs). The bunch
compression techniques used to achieve the high brightness impose challenging
tolerances on the accelerator RF phase and amplitude. The results of
measurements on the existing SLAC linac RF phase and amplitude stability are
summarised and improvements needed to meet the LCLS tolerances are discussed.
| [
{
"version": "v1",
"created": "Sat, 19 Aug 2000 01:19:06 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Akre",
"R.",
""
],
[
"Bharadwaj",
"V.",
""
],
[
"Emma",
"P.",
""
],
[
"Krejcik",
"P.",
""
]
]
|
physics/0008172 | Nobu Toge | N. Toge (KEK) | JLC Progress | MO204, submitted to XX'th International Linac Conference (LINAC
2000). 5 pages, 8 figures | eConf C000821 (2000) MO204 | null | null | physics.acc-ph | null | The JLC is a linear collider project pursued in Japan by researchers centered
around KEK. The R&D status for the JLC project is presented, with emphasis on
recent results from ATF concerning studies of production of ultra-low emittance
beams and from manufacturing research on X-band accelerator structures.
| [
{
"version": "v1",
"created": "Sat, 19 Aug 2000 02:16:46 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Toge",
"N.",
"",
"KEK"
]
]
|
physics/0008174 | Milorad Popovic | Milorad Popovic | 2GeV Superconducting Muon Linac | Linac2000 THC06 | eConf C000821 (2000) THc06 | null | null | physics.acc-ph | null | A muon collider as well as a neutrino factory requires a large number of
muons with a kinetic energy of 50GeV or more. Muon survival demands a high
gradient linac. The large transverse and longitudinal emittance of the muon
beam coming from a muon cooling system implies the need for a large acceptance,
acceleration system. These two requirements point clearly to a linac based on
superconducting technology. The design of a 2GeV Superconducting muon Linac
based on computer programs developed at LANL will be presented. The design is
based on the technology available today or components that will be avaible in
the very near future.
| [
{
"version": "v1",
"created": "Sat, 19 Aug 2000 03:01:03 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Popovic",
"Milorad",
""
]
]
|
physics/0008175 | Zenei Igarashi | Z.Igarashi, K.Nanmo, T.Takenaka and E.Takasaki | Beam Energy Stabilization of the Kek 40mev Proton Linac | 3pages, 8figures International Linac Conference(LINC2000) | eConf C000821 (2000) THB09 | null | THB09 | physics.acc-ph | null | The new method to stabilize the beam energy of the KEK 40MeV proton linac, is
developed now. In this method, the signal of the velocity monitor installed
upstream the debuncher in the 40MeV beam line, is processed and then fed to the
phase shifter of the debuncher rf system so as to cancel the fluctuation of the
beam energy. In this article, the beam tests to prove the validity of this
method and the system are described.
| [
{
"version": "v1",
"created": "Sat, 19 Aug 2000 03:52:42 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Igarashi",
"Z.",
""
],
[
"Nanmo",
"K.",
""
],
[
"Takenaka",
"T.",
""
],
[
"Takasaki",
"E.",
""
]
]
|
physics/0008176 | Milorad Popovic | M. Popovic, L. Allen, A. Moretti, E. McCrory, C.W. Schmidt and T.
Sullivan | High Current Proton Tests of the Fermilab Linac | Linac2000 TUD16 | eConf C000821 (2000) TUD16 | null | null | physics.acc-ph | null | The peak current limit for the Fermilab Linac was recently studied. The
purpose was to learn what components of the present Linac can be used for the
first stage of a proposed proton driver[1]. For this application the Linac must
provide a H- beam in excess of 5000 mA-msec per pulse. The original Fermilab
Linac was designed for protons with a peak current of 75 mA and a pulse length
of four Booster turns (~10 msec). The high energy replacement was designed for
a peak current of 35 mA and a beam pulse length of 50 msec. The present H-
source cannot deliver more than ~80 mA which produces 55 mA in the Linac. Using
a proton source allows the system to be tested to currents of ~100 mA and pulse
lengths long enough to observe the effects of long pulses. This test has shown
that the present Linac can accelerate beam having a peak current up to ~85 mA
with beam loss comparable to the present Linac operation (~45 mA). The results
of the test will be presented.
| [
{
"version": "v1",
"created": "Sat, 19 Aug 2000 03:36:11 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Popovic",
"M.",
""
],
[
"Allen",
"L.",
""
],
[
"Moretti",
"A.",
""
],
[
"McCrory",
"E.",
""
],
[
"Schmidt",
"C. W.",
""
],
[
"Sullivan",
"T.",
""
]
]
|
physics/0008177 | Valery A. Dolgashev | Valery A. Dolgashev, Sami G. Tantawi | 2D Simulation of High-Efficiency Cross-Field RF Power Sources | 3 pages, 1 figure, 1 cls file, submitted to LINAC2000 as THA06 | eConf C000821 (2000) THA06 | null | null | physics.acc-ph | null | An efficient method for frequency domain analysis of 2D cross-field devices
is presented. This work was done to analyze and design high efficiency
magnetrons. Arbitrary device-geometries are described by a piecewise planar
boundary. The method is based on an expansion of the electromagnetic fields
into a set of cavity eigenmodes. In order to obtain the self-consistent
solution, iterations are performed until the energy balance is reached. A
boundary integration method is used to take into account space charge effects.
The cavity eigenmodes are found by a method based on the scattering matrix
technique. The geometry is divided into regions. The boundary contour
mode-matching method is used to obtain the scattering matrices for each region.
Electromagnetic fields in each region are expanded into a series of plane
waves. Due to choice of plane wave expansion, all integration in the
mode-matching process is carried out analytically. The scattering matrices of
the regions are combined using a generalized scattering matrix technique to
obtain the scattering matrix for the full geometry, and then the eigenmode
resonance frequencies and the fields. Periodic boundary condition is used for
the field calculation and the particle tracking.
| [
{
"version": "v1",
"created": "Sun, 20 Aug 2000 21:09:52 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Dolgashev",
"Valery A.",
""
],
[
"Tantawi",
"Sami G.",
""
]
]
|
physics/0008179 | Kazuo Yoshino | K. Yoshino, E. Takasaki, F. Naito, T. Kato, Y. Yamazaki (KEK), K.
Tajiri, T. Kawasumi, Y. Imoto, Z. Kabeya (Mitsubishi Heavy Industries) | Development of a DTL Quadrupole Magnet with a New Electroformed Hollow
Coil for the Jaeri/Kek Joint Project | null | eConf C000821 (2000) TUD10 | null | TUD10 | physics.acc-ph | null | Quadrupole electromagnets have been developed with a hollow coil produced
using an improved periodic reverse electroforming. These will be installed in
each of the drift tubes of the DTL (324 MHz) as part of the JAERI/KEK Joint
Project at the high-intensity proton accelerator facility. Measurements of the
magnets' properties were found to be consistent with computer-calculated
estimated. The details of the design, the fabrication process, and the
measurement results for the quadrupole magnet are described.
| [
{
"version": "v1",
"created": "Sat, 19 Aug 2000 08:25:06 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Yoshino",
"K.",
"",
"KEK"
],
[
"Takasaki",
"E.",
"",
"KEK"
],
[
"Naito",
"F.",
"",
"KEK"
],
[
"Kato",
"T.",
"",
"KEK"
],
[
"Yamazaki",
"Y.",
"",
"KEK"
],
[
"Tajiri",
"K.",
"",
"Mitsubishi Heavy Industries"
],
[
"Kawasumi",
"T.",
"",
"Mitsubishi Heavy Industries"
],
[
"Imoto",
"Y.",
"",
"Mitsubishi Heavy Industries"
],
[
"Kabeya",
"Z.",
"",
"Mitsubishi Heavy Industries"
]
]
|
physics/0008181 | Andrei Kolomiets | A. Kolomiets, S. Yaramishev (ITEP, Moscow, Russia) | Study of Nonlinearities and Small Particle Losses in High Power Linac | LINAC2000, THB04 | eConf C000821 (2000) THB04 | null | null | physics.acc-ph | null | The conception of High Power Linac developed in Russian accelerator centres
is based on the use of independently phased SC resonators with quadrupole
lenses between them. The type and parameters of the resonators as well as
focusing structure are varied along the linac to optimise beam dynamics and the
characteristics of the linac. The beam evolution in the linac was studied by
simulation in 3D accelerating and focusing fields by computer code DYNAMION.
The simulation includes all nonlinearities of external fields and space
charge forces. Estimations of particle losses in the beam based on analysis of
the spectral properties of particle trajectories were carried out.
| [
{
"version": "v1",
"created": "Sat, 19 Aug 2000 17:06:00 GMT"
},
{
"version": "v2",
"created": "Tue, 22 Aug 2000 23:15:10 GMT"
}
]
| 2007-05-23T00:00:00 | [
[
"Kolomiets",
"A.",
"",
"ITEP, Moscow, Russia"
],
[
"Yaramishev",
"S.",
"",
"ITEP, Moscow, Russia"
]
]
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.