text
stringlengths 3
1.04M
|
|---|
#!/usr/bin/env python
# encoding: utf-8
"""
Bibliographic database backed by a bibtex file.
"""
import bibtexparser
from .. import texutils
from .base import BasePub
from .adsdb import ADSBibDB
class BibTexDB(object):
"""Bibliographic Database derived from a bibtex file."""
def __init__(self, path, ads_cache=None):
super(BibTexDB, self).__init__()
self._filepath = path
with open(path) as bibtex_file:
bibtex_str = bibtex_file.read()
self._db = bibtexparser.loads(bibtex_str)
self._ads_cache = ads_cache
def __getitem__(self, bibkey):
return BibTexPub(self._db.entries_dict[bibkey],
ads_cache=self._ads_cache)
class BibTexPub(BasePub):
"""A publication backed by bibtex."""
def __init__(self, pub_dict, ads_cache=None):
super(BibTexPub, self).__init__()
self._data = pub_dict
# FIXME does it make sense to embed a connection to ADSBibDB in
# each bibtex publication instance???
self._ads_db = ADSBibDB(cache=ads_cache)
self._ads_pub = None
self._encoder = texutils.TexEncoder()
def __getitem__(self, key):
return self._data[key]
def _get_ads_pub(self):
"""Get the representation for the publication via ADS."""
if self._ads_pub is None:
print "Getting ADSPub for", self.bibcode
self._ads_pub = self._ads_db[self.bibcode]
return self._ads_pub
@property
def authors(self):
"""Parsed list of authors; each author is a ``(Last, First)`` tuple."""
return texutils.parse_bibtex_authors(self._data['author'])
@property
def title(self):
"""Title (unicode)"""
return self._encoder.decode_latex(self._data['title'])
@property
def abstract(self):
"""Abstract text (unicode)."""
return self._encoder.decode_latex(self._data['abstract'])
@property
def bibcode(self):
"""The ADS bibcode for this publication."""
# Look for a bibcode in the records
# TODO throw exception if not found
# TODO make a resolver to check that it is a valid bibcode
if 'adsurl' in self._data:
bibcode = self._data['adsurl'].split('/')[-1]
bibcode = bibcode.replace("%26", "&")
return bibcode
@property
def references(self):
"""Records of papers referenced by this publication."""
ads_pub = self._get_ads_pub()
return ads_pub.references
@property
def reference_bibcodes(self):
ads_pub = self._get_ads_pub()
return ads_pub.reference_bibcodes
@property
def citations(self):
"""Records of papers referenced by this publication."""
ads_pub = self._get_ads_pub()
return ads_pub.citations
@property
def citation_bibcodes(self):
ads_pub = self._get_ads_pub()
return ads_pub.citation_bibcodes
@property
def doi(self):
"""DOI for paper."""
if 'doi' in self._data:
return self._data['doi']
else:
# FIXME should I throw an exception instead?
return None
@property
def arxiv_id(self):
"""Arxiv identifier for article."""
print self._data.keys()
if 'eprint' in self._data:
eprint = self._data['eprint']
eprint = eprint.strip('arXiv:')
return eprint
|
Rails.application.routes.draw do
root 'welcome#index'
resources :users
resources :cidades
resources :estados
# The priority is based upon order of creation: first created -> highest priority.
# See how all your routes lay out with "rake routes".
# You can have the root of your site routed with "root"
# root 'welcome#index'
# Example of regular route:
# get 'products/:id' => 'catalog#view'
# Example of named route that can be invoked with purchase_url(id: product.id)
# get 'products/:id/purchase' => 'catalog#purchase', as: :purchase
# Example resource route (maps HTTP verbs to controller actions automatically):
# resources :products
# Example resource route with options:
# resources :products do
# member do
# get 'short'
# post 'toggle'
# end
#
# collection do
# get 'sold'
# end
# end
# Example resource route with sub-resources:
# resources :products do
# resources :comments, :sales
# resource :seller
# end
# Example resource route with more complex sub-resources:
# resources :products do
# resources :comments
# resources :sales do
# get 'recent', on: :collection
# end
# end
# Example resource route with concerns:
# concern :toggleable do
# post 'toggle'
# end
# resources :posts, concerns: :toggleable
# resources :photos, concerns: :toggleable
# Example resource route within a namespace:
# namespace :admin do
# # Directs /admin/products/* to Admin::ProductsController
# # (app/controllers/admin/products_controller.rb)
# resources :products
# end
end
|
Science demands precision, and part of mastering a subject involves learning the exact differences between words that mean more or less the same thing. An entomologist, for example, knows the difference between a grub and a maggot, whereas for the rest, they are simply worms. However, to a software engineer, these words mean something completely different. At times, the only difference between two words is that one is more common in Britain and the other is more common in the United States: a lift and an elevator, for instance, or a queue and a line.
English has a very large vocabulary. However, to write well, it is not enough to know many words; rather, it is more important to know them well so that you use the right word. A useful volume for this is The Merriam-Webster Pocket Dictionary of Synonyms. English dictionaries meant for learners also have a feature that brings out the exact differences between groups of synonyms. Longman Dictionary of Contemporary English is a good example. Two other sources are The Dictionary of Confusable Words by Laurence Urdang and Room’s Dictionary of Distinguishables. Several websites are devoted to explaining such differences; wiseGEEK and DifferenceBetween.net are good examples. |
-- adding a key requirement for gameobject "Cage Door" (entry: 143979) at Kurzen's Compound by closing it
UPDATE `gameobject` SET `state`=1 WHERE `guid`=10673;
|
We have loads available daily in denton, North Carolina for you to haul or bid on. ComFreight.com is the Future of Load Boards. The Load Matching and Freight Bidding App designed to make your life easier. Start posting your truck space or available trucking capacity to get alerts for loads that are posted within range of your empty truck. Thousands of loads are available everyday in denton, North Carolina and you can bid or call on all your loads online. Try It Free Today! |
package lexek.wschat.proxy;
import com.google.common.cache.CacheBuilder;
import com.google.common.cache.CacheLoader;
import com.google.common.cache.LoadingCache;
import lexek.wschat.chat.e.InternalErrorException;
import lexek.wschat.chat.msg.EmoticonProvider;
import lexek.wschat.db.dao.ProxyEmoticonDao;
import lexek.wschat.db.model.ProxyEmoticon;
import org.jvnet.hk2.annotations.Service;
import javax.inject.Inject;
import java.util.List;
import java.util.concurrent.ExecutionException;
@Service
public class ProxyEmoticonProviderFactory {
private final LoadingCache<String, List<ProxyEmoticon>> cache;
@Inject
public ProxyEmoticonProviderFactory(ProxyEmoticonDao proxyEmoticonDao) {
cache = CacheBuilder.newBuilder().build(new CacheLoader<String, List<ProxyEmoticon>>() {
@Override
public List<ProxyEmoticon> load(String key) throws Exception {
List<ProxyEmoticon> emoticons = proxyEmoticonDao.getEmoticons(key);
if (emoticons != null) {
emoticons.forEach(ProxyEmoticon::initPattern);
return emoticons;
}
throw new IllegalArgumentException();
}
});
}
public EmoticonProvider<ProxyEmoticon> getProvider(String providerName) {
return () -> {
try {
return cache.get(providerName);
} catch (ExecutionException e) {
throw new InternalErrorException(e);
}
};
}
public void flush(String providerName) {
cache.invalidate(providerName);
}
}
|
$43 per ton in 2022; increasing to $69 per ton in 2050, 3 based on IWG SCC at 3%.
CPUC initiated Proceeding No. 17M-0694E in October 2017 to implement its rules regarding Electric Resource Planning and incorporate its findings of Decision No. C17-0316, including changes to Rules CCR 723-3, 3604(k) and 3611(g). |
XP-Pro on the workstations. Neware 5.1 SP3 on the server (No eDirectory).
What is the best client to use(less overhead)?
Seems that 4.83 SP1 has been our best bet so far. |
*ACE Inhibitors - High blood pressure levels medication are also known as ACE inhibitors are prescribed under the names of Zestril and Altace. My life was full, with three children plus a grandchild, my family and friends, my work. I cut that back to 300 mg for the couple of weeks, and then cut that down to 150 mg. It blocks the absorption of serotonin and norepinephrine, which can be chemicals that affect mood and concentration, through the brain. Here are simply four cases collected from this small-time medical practitioner inside of five or six months.
From my former experiences with Zoloft, I also realize that I am going to get somewhat manic, especially as I accommodate the Effexor. For now, all we will need to go on is anecdotal evidence that inside treatment of ADHD, neurotransmitters are secure and often very effective. Major depression and antidepressant treatment: Impact on pregnancy and neonatal outcomes. The problem was the drug taught me to be sleepy, and helped me feel just as if I could not do anything whatsoever. If you are told that this drugs you wish to buy comes in branded form only then understand how the person want to sell you expensive branded medicine.
So for 25 days, I was either dizzy or stood a severe headache. All other reported undesirable effects occurred at visits a rate lower than 0. They wish to chase targets and they may be taught never to give up. If I leave the house and forget to carry along some water, I get a lttle bit panicky until I can obtain a bottle, because even 5 minutes without something to wet my whistle can seem to be like an eternity. The sexual disorder is most common negative effects one can have.
Effexor blocks the re-uptake of serotonin and norepinephrine in your brain. She is prescribed a minimal dose, that is quickly increased over the two month period. To learn more about this topic, please visit Britannia Acupuncture Clinic. , 2009), but has a rating of L4 ('possibly hazardous'), and really should be combined with extreme caution in breastfeeding women. I used the extended release version for the long time, but after I had gastric bypass surgery, I was advised to switch towards the non-extended release version because gastric bypass patients do not absorb extended release drugs correctly.
I didn't feel sad, but neither did I feel happy about anything, I felt numb and didn't care about anything. Few precaution need to be taken before taking Effexor XR medicine to prevent any side-effect. I also felt more tired than normal and thought we would call and discuss the negative effects with my doctor. Some people attempt to live your life free of "drugs" thinking how the only bad prescription medication is "street drugs". My mom, for the other hand, took it for 2 years and only recently stopped using the drug. |
using System.Reflection;
using System.Runtime.CompilerServices;
using System.Runtime.InteropServices;
// General Information about an assembly is controlled through the following
// set of attributes. Change these attribute values to modify the information
// associated with an assembly.
[assembly: AssemblyTitle("TheaThePhotographer")]
[assembly: AssemblyDescription("")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("")]
[assembly: AssemblyProduct("TheaThePhotographer")]
[assembly: AssemblyCopyright("Copyright © 2017")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]
// Setting ComVisible to false makes the types in this assembly not visible
// to COM components. If you need to access a type in this assembly from
// COM, set the ComVisible attribute to true on that type.
[assembly: ComVisible(false)]
// The following GUID is for the ID of the typelib if this project is exposed to COM
[assembly: Guid("f43082c7-2ec5-407a-83ea-4c24942fd8c9")]
// Version information for an assembly consists of the following four values:
//
// Major Version
// Minor Version
// Build Number
// Revision
//
// You can specify all the values or you can default the Build and Revision Numbers
// by using the '*' as shown below:
// [assembly: AssemblyVersion("1.0.*")]
[assembly: AssemblyVersion("1.0.0.0")]
[assembly: AssemblyFileVersion("1.0.0.0")]
|
First opened in Vancouver, BC, Canada in 1997, Enerex created a distinctive class of Nutritional Supplements offering the highest level of efficacy without compromising any step in the creation process of our products. With a deep business philosophy and practices, Enerex is also concerned for the environment. Its Environmental Initiatives Project is an ongoing way in order for them to recognize opportunities in reducing the environmental impact running their business. Behind Enerex is a commitment to set the gold standard in the world of nutritional supplements, because you're worth it.
Ever since Enerex opened its doors in 1997, it has been successful in designing a product line of nutraceuticals to meet the growing demand for effective health treatments without harmful side effects. Today, Enerex is now a multi-million dollar company with the same mission to deliver safe products in secured packaging and minimize any negative impact on both product and our future generations.
No Enerex products found for these filters. |
I'm a writer who has been following Bitcoin since 2011. I've worked all over the Bitcoin media space -- from being editor-in-chief at Inside Bitcoins to contributing to Bitcoin Magazine on a regular basis. My work has also been featured in Business Insider, VICE Motherboard, and many other financial and tech media outlets. I'm mostly interested in the use of Bitcoin for transactions that would be censored by the traditional financial system (think darknet markets and ransomware) in addition to the use of bitcoin as an unseizable, digital store of value. Altcoins, appcoins, and ICOs don't make much sense to me. Find my daily Bitcoin newsletter, YouTube show, and podcast at kyletorpey.com. Disclosure: I hold some bitcoin. |
3 Series I Drive Manual is good choice for you that looking for nice reading experience. We hope you glad to visit our website. Please read our description and our privacy and policy page.
Finally I get this ebook, thanks for all these 3 Series I Drive Manual can get now! |
import * as React from 'react';
import RcImage from 'rc-image';
import RotateLeftOutlined from '@ant-design/icons/RotateLeftOutlined';
import RotateRightOutlined from '@ant-design/icons/RotateRightOutlined';
import ZoomInOutlined from '@ant-design/icons/ZoomInOutlined';
import ZoomOutOutlined from '@ant-design/icons/ZoomOutOutlined';
import CloseOutlined from '@ant-design/icons/CloseOutlined';
import LeftOutlined from '@ant-design/icons/LeftOutlined';
import RightOutlined from '@ant-design/icons/RightOutlined';
import { GroupConsumerProps } from 'rc-image/lib/PreviewGroup';
import { ConfigContext } from '../config-provider';
import { getTransitionName } from '../_util/motion';
export const icons = {
rotateLeft: <RotateLeftOutlined />,
rotateRight: <RotateRightOutlined />,
zoomIn: <ZoomInOutlined />,
zoomOut: <ZoomOutOutlined />,
close: <CloseOutlined />,
left: <LeftOutlined />,
right: <RightOutlined />,
};
const InternalPreviewGroup: React.FC<GroupConsumerProps> = ({
previewPrefixCls: customizePrefixCls,
preview,
...props
}) => {
const { getPrefixCls } = React.useContext(ConfigContext);
const prefixCls = getPrefixCls('image-preview', customizePrefixCls);
const rootPrefixCls = getPrefixCls();
const mergedPreview = React.useMemo(() => {
if (preview === false) {
return preview;
}
const _preview = typeof preview === 'object' ? preview : {};
return {
..._preview,
transitionName: getTransitionName(rootPrefixCls, 'zoom', _preview.transitionName),
maskTransitionName: getTransitionName(rootPrefixCls, 'fade', _preview.maskTransitionName),
};
}, [preview]);
return (
<RcImage.PreviewGroup
preview={mergedPreview}
previewPrefixCls={prefixCls}
icons={icons}
{...props}
/>
);
};
export default InternalPreviewGroup;
|
Kester's bobwhite trailing soybean was bred specifically for wildlife. This plant produces climbing vines that can crawl up corn, sorghum, sunflowers, and other nearby plants. Deer are attracted to the foliage, while birds are attracted to the beans and insects. Plant bobwhite trailing soybeans near other plants or vegetation for it to climb. |
/*
* Tanaguru - Automated webpage assessment
* Copyright (C) 2008-2015 Tanaguru.org
*
* This file is part of Tanaguru.
*
* Tanaguru is free software: you can redistribute it and/or modify
* it under the terms of the GNU Affero General Public License as
* published by the Free Software Foundation, either version 3 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Affero General Public License for more details.
*
* You should have received a copy of the GNU Affero General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Contact us by mail: tanaguru AT tanaguru DOT org
*/
package org.tanaguru.webapp.validator;
//import org.tanaguru.command.UserSignUpCommand;
import java.util.regex.Pattern;
import org.apache.commons.validator.routines.UrlValidator;
import org.tanaguru.webapp.command.CreateUserCommand;
import org.tanaguru.webapp.command.UserSignUpCommand;
import org.tanaguru.webapp.entity.service.user.UserDataService;
import org.tanaguru.webapp.util.TgolPasswordChecker;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.validation.Errors;
import org.springframework.validation.Validator;
/**
*
* @author jkowalczyk
*/
public class CreateUserFormValidator implements Validator {
private static final String GENERAL_ERROR_MSG_KEY = "generalErrorMsg";
private static final String SITE_URL_KEY = "siteUrl";
private static final String EMAIL_KEY = "email";
private static final String PASSWORD_KEY = "password";
private static final String MANDATORY_FIELD_MSG_BUNDLE_KEY =
"sign-up.mandatoryField";
private static final String EXISTING_ACCOUNT_WITH_EMAIL_KEY =
"sign-up.existingAccountWithEmail";
private static final String PASSWORD_NOT_IDENTICAL_KEY =
"sign-up.passwordNotIdentical";
private static final String MISSING_URL_KEY =
"sign-up.missingUrl";
private static final String MISSING_EMAIL_KEY =
"sign-up.missingEmail";
private static final String MISSING_PASSWORD_KEY =
"sign-up.missingPassword";
private static final String INVALID_EMAIL_KEY =
"sign-up.invalidEmail";
private static final String INVALID_URL_KEY =
"sign-up.invalidUrl";
private static final String INVALID_PASSWORD_KEY =
"sign-up.invalidPassword";
// from http://www.regular-expressions.info/email.html
private static final String EMAIL_CHECKER_REGEXP =
"[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*@(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9])?";
private final Pattern emailCheckerPattern = Pattern.compile(EMAIL_CHECKER_REGEXP);
private UserDataService userDataService;
public UserDataService getContractDataService() {
return userDataService;
}
private boolean checkSiteUrl = true;
public void setCheckSiteUrl(boolean checkSiteUrl) {
this.checkSiteUrl = checkSiteUrl;
}
@Autowired
public void setUserDataService(UserDataService userDataService) {
this.userDataService = userDataService;
}
@Override
public void validate(Object target, Errors errors) {
boolean hasMandatoryElementWrong = false;
CreateUserCommand userSubscriptionCommand = (CreateUserCommand)target;
if (!checkSiteUrl(userSubscriptionCommand, errors)) {
hasMandatoryElementWrong = true;
}
if (!checkEmail(userSubscriptionCommand, errors)) {
hasMandatoryElementWrong = true;
}
if (!checkPassword(userSubscriptionCommand, errors)) {
hasMandatoryElementWrong = true;
}
// if (userSubscriptionCommand.getPhoneNumber() != null &&
// !phoneCheckerPattern.matcher(userSubscriptionCommand.getPhoneNumber()).matches()) {
// hasMandatoryElementWrong = true;
// errors.rejectValue(PHONE_NUMBER_KEY, INVALID_PHONE_KEY);
// }
if(hasMandatoryElementWrong) { // if no URL is filled-in
errors.rejectValue(GENERAL_ERROR_MSG_KEY,
MANDATORY_FIELD_MSG_BUNDLE_KEY);
}
}
public void validateUpdate(Object target, Errors errors, String currentUserEmail) {
CreateUserCommand userSubscriptionCommand = (CreateUserCommand)target;
if (!currentUserEmail.equalsIgnoreCase(userSubscriptionCommand.getEmail())) {
checkEmail(userSubscriptionCommand, errors);
}
}
/**
*
* @param userSubscriptionCommand
* @param errors
* @return
*/
private boolean checkSiteUrl(CreateUserCommand userSubscriptionCommand, Errors errors) {
if (!checkSiteUrl) {
return true;
}
if (userSubscriptionCommand.getSiteUrl() == null ||
userSubscriptionCommand.getSiteUrl().trim().isEmpty()) {
errors.rejectValue(SITE_URL_KEY, MISSING_URL_KEY);
return false;
} else {
String url = userSubscriptionCommand.getSiteUrl().trim();
String[] schemes = {"http","https"};
UrlValidator urlValidator = new UrlValidator (schemes, UrlValidator.ALLOW_2_SLASHES);
if (!urlValidator.isValid(url)) {
errors.rejectValue(SITE_URL_KEY, INVALID_URL_KEY);
return false;
}
}
return true;
}
/**
*
* @param userSubscriptionCommand
* @param errors
* @return
*/
private boolean checkEmail(
CreateUserCommand userSubscriptionCommand,
Errors errors) {
if (userSubscriptionCommand.getEmail() == null ||
userSubscriptionCommand.getEmail().trim().isEmpty()) {
errors.rejectValue(EMAIL_KEY, MISSING_EMAIL_KEY);
return false;
} else {
String email = userSubscriptionCommand.getEmail();
if (userDataService.getUserFromEmail(userSubscriptionCommand.getEmail()) != null) {
errors.rejectValue(EMAIL_KEY, EXISTING_ACCOUNT_WITH_EMAIL_KEY);
return false;
} else if (!emailCheckerPattern.matcher(email).matches()) {
errors.rejectValue(EMAIL_KEY, INVALID_EMAIL_KEY);
return false;
}
}
return true;
}
/**
*
* @param userSubscriptionCommand
* @param errors
* @return
*/
private boolean checkPassword(
CreateUserCommand userSubscriptionCommand,
Errors errors) {
String password = userSubscriptionCommand.getPassword();
if (password == null ||
password.trim().isEmpty()) {
errors.rejectValue(PASSWORD_KEY, MISSING_PASSWORD_KEY);
return false;
} else if (!password.equals(userSubscriptionCommand.getConfirmPassword())) {
errors.rejectValue(PASSWORD_KEY, PASSWORD_NOT_IDENTICAL_KEY);
return false;
} else if (!TgolPasswordChecker.getInstance().checkPasswordValidity(password)) {
errors.rejectValue(PASSWORD_KEY, INVALID_PASSWORD_KEY);
return false;
}
return true;
}
@Override
public boolean supports(Class clazz) {
return UserSignUpCommand.class.isAssignableFrom(clazz);
}
} |
The Double Cross saddle pad is made from New Zealand wool and is built for style, performance and function. Available over sized configurations of 34" Length x 36" Width. With a removable insert Contour 3/4" closed cell foam. Black leather wears with standard Team Equine side wear patches. Color Sage/Espresso/Laurel Green/Fawn. |
The Boys & Girls Clubs of Syracuse provides youth & teens with life changing programs, fun, enriching experiences and supportive relationships with peers and caring adults.
Donate now to provide a place of safety after school for youth in Syracuse. You’ll create a welcoming environment for kids to learn and grow — with activities and mentors to help them become responsible members of our community.
To make a monetary donation, please select the amount you wish to donate, add any additional instructions or comments, then click DONATE NOW! Your transaction will be processed securely through PayPal. |
'use strict';
/**
* Tiny class to simplify dealing with subscription set
*
* @constructor
* @private
*/
function SubscriptionSet () {
this.set = {
subscribe: {},
psubscribe: {}
};
}
SubscriptionSet.prototype.add = function (set, channel) {
this.set[mapSet(set)][channel] = true;
};
SubscriptionSet.prototype.del = function (set, channel) {
delete this.set[mapSet(set)][channel];
};
SubscriptionSet.prototype.channels = function (set) {
return Object.keys(this.set[mapSet(set)]);
};
SubscriptionSet.prototype.isEmpty = function () {
return this.channels('subscribe').length === 0 && this.channels('psubscribe').length === 0;
};
function mapSet(set) {
if (set === 'unsubscribe') {
return 'subscribe';
}
if (set === 'punsubscribe') {
return 'psubscribe';
}
return set;
}
module.exports = SubscriptionSet;
|
Gangtok: Sikkim Government has signed an MoU with Intamin Transportation Limited, Switzerland for the Gangtok Monorail project. The feasibility study will start after a month.
The phase-I of the project from Ranipool – Gangtok is likely to be completed by 2018 subject to submission of documents.
Minister for UD & HD N.K. Subba, Parliamentary Secretary Pintso Chopel Lepcha & officers of the Department & the official delegation of Intamin Transportation Limited, Switzerland called on Sikkim Chief Minister Pawan Chamling at his official residence at Mintokgang on Wednesday & discussed the details of the Project. |
"use strict";
import * as fs from "fs";
import * as path from "path";
import * as url from "url";
import * as tl from "vsts-task-lib/task";
import * as tr from "vsts-task-lib/toolrunner";
import AuthenticationToken from "docker-common/registryauthenticationprovider/registryauthenticationtoken"
import * as utils from "./utilities";
import * as os from "os";
import kubectlutility = require("utility-common/kubectlutility");
export default class ClusterConnection {
private kubectlPath: string;
private kubeconfigFile: string;
private userDir: string;
constructor() {
this.kubectlPath = tl.which("kubectl", false);
this.userDir = utils.getNewUserDirPath();
}
private async initialize(): Promise<void> {
return this.getKubectl().then((kubectlpath)=> {
this.kubectlPath = kubectlpath;
});
}
public createCommand(): tr.ToolRunner {
var command = tl.tool(this.kubectlPath);
if(this.kubeconfigFile)
{
command.arg("--kubeconfig");
command.arg(this.kubeconfigFile);
}
return command;
}
// open kubernetes connection
public async open(kubernetesEndpoint?: string){
return this.initialize().then(() => {
var authorizationType = tl.getEndpointDataParameter(kubernetesEndpoint, 'authorizationType', true);
var kubeconfig = null;
if (!authorizationType || authorizationType === "Kubeconfig")
{
if (kubernetesEndpoint) {
kubeconfig = kubectlutility.getKubeconfigForCluster(kubernetesEndpoint);
}
}
else if (authorizationType === "ServiceAccount")
{
kubeconfig = kubectlutility.createKubeconfig(kubernetesEndpoint);
}
this.kubeconfigFile = path.join(this.userDir, "config");
fs.writeFileSync(this.kubeconfigFile, kubeconfig);
});
}
// close kubernetes connection
public close(): void {
// all configuration are in agent temp directory. Hence automatically deleted.
}
//excute kubernetes command
public execCommand(command: tr.ToolRunner, options?: tr.IExecOptions) {
var errlines = [];
command.on("errline", line => {
errlines.push(line);
});
return command.exec(options).fail(error => {
errlines.forEach(line => tl.error(line));
throw error;
});
}
private getExecutableExtention(): string {
if(os.type().match(/^Win/)){
return ".exe";
}
return "";
}
private async getKubectl() : Promise<string> {
let versionOrLocation = tl.getInput("versionOrLocation");
if( versionOrLocation === "location") {
let pathToKubectl = tl.getPathInput("specifyLocation", true, true);
fs.chmodSync(pathToKubectl, "777");
return pathToKubectl;
}
else if(versionOrLocation === "version") {
var defaultVersionSpec = "1.7.0";
var kubectlPath = path.join(this.userDir, "kubectl") + this.getExecutableExtention();
let versionSpec = tl.getInput("versionSpec");
let checkLatest: boolean = tl.getBoolInput('checkLatest', false);
if (versionSpec != defaultVersionSpec || checkLatest)
{
tl.debug(tl.loc("DownloadingClient"));
return utils.getKubectlVersion(versionSpec, checkLatest).then((version) => {
return utils.downloadKubectl(version, kubectlPath);
});
}
// Reached here => default version
// Now to handle back-compat, return the version installed on the machine
if(this.kubectlPath && fs.existsSync(this.kubectlPath))
{
return this.kubectlPath;
}
// Download the default version
tl.debug(tl.loc("DownloadingClient"));
return utils.getKubectlVersion(versionSpec, checkLatest).then((version) => {
return utils.downloadKubectl(version, kubectlPath);
});
}
}
} |
#!/bin/bash
source config1.sh
echo "$GREETING, $NAME!"
|
Joseph Bellino, a teacher at Montgomery Blair High School, has been named by the U.S. State Department and USA Today to receive a Millennium International Volunteer Award.
He is one of 32 winners from around the nation, a list that includes former President Jimmy Carter and Mrs. Rosalynn Carter. An estimated 500-700 guests attended a March 1 awards gala at the National Building Museum to honor the winners, who have given their time and talent to promote global understanding and international education.
Bellino has been a teacher of English for Speakers of Other Languages (ESOL) at Blair since 1974 and is currently chair of the ESOL Department. He has volunteered large amounts of time on initiatives that support the school's international students and their families. Fourteen years ago he helped start Silver International, an international student newspaper, to encourage students to use their English reading and writing skills and to help students of all cultures learn about each other. Articles can be viewed at www.mbhs.edu/clubs/silverint/.
Bellino also has spent weekends and summer hours developing computer programs that allow the school to send attendance and grade report letters in Spanish, Vietnamese and simplified English. In addition, he has been an active volunteer and leader in a local community center that serves many of the school's immigrant families and also has encouraged high school students to become involved in educational and service activities.
The award is not the first Bellino has received. In November 1998, he was named Teacher of the Year by the Maryland PTA for his outstanding service to ESOL students, parents and the community. Two weeks prior to that, he received the 1998 Educator of the Year Award from the Silver Spring Chamber of Commerce, given annually to an individual who has had a significant impact on his or her students.
The U.S. State Department's Bureau of Educational and Cultural Affairs partnered with USA Today to sponsor the Millennium International Volunteer Awards Program. It is one of a number of special millennium programs sponsored by the State Department this year and is designated as an official program of the White House Millennium Council.
As part of the award, a $5,000 donation will be made to a nonprofit organization of each winner's choice. Bellino has designated Silver International and the Carroll Avenue and Quebec Terrace Community Center as his recipients. |
#include "OSDriver.hpp"
extern pcbQueue readyQueue;
extern FIFO waitingQueue, terminatedQueue , newQueue;
extern Ram MEM;
extern Disk DISK;
extern std::vector<PCB> process_list;
long int clock_Tick;
bool programEnd;
#if (defined DEBUG || defined _DEBUG)
#endif
OSDriver::OSDriver() :
cpu_cycle(DEFAULT_CPU_CYCLE_TIME),
current_cycle(0),
ldr(),
Dispatch(),
ltSched(),
CpuPool()
{ }
OSDriver::~OSDriver() { }
void RunClock()
{
while (programEnd == false)
{
std::this_thread::sleep_for(std::chrono::microseconds(1));//increments 1 mirco sec
clock_Tick++;
}
}
void printOutPut(PCB * pcb)
{
std::fstream myfile;
myfile.open("example.txt", std::ios::out | std::ios::app);
myfile << "Process completed :" << pcb->get_pid() << "\r\n";
myfile.close();
}
void run_cpu(cpu * CPU, PCB * pcb, int * current_cycle)
{
Hardware::LockHardware(pcb->get_resource_status()); //locks resource
//set cpu cache id to running process
CPU->cache.current_pid = pcb->get_pid();
pcb->set_wait_end_clock();
while (pcb->get_status() != status::TERMINATED &&
pcb->get_status() != status::WAITING)
{
instruct_t instruct = CPU->fetch(pcb);
if (pcb->get_status() == WAITING)
{
Dispatcher::switchOut(CPU, pcb);
ShortTermScheduler::RunningToWait(pcb);
break;
}
// The fetched instruction is 0, meaning it's accessed some zeroed out
// data. This shouldn't happen.
if (instruct == 0) {
auto note = pcb->get_frame(pcb->get_program_counter() / (PAGE_SIZE));
std::cout << "Instruction at "
<< note << " is 0\n"
<< "Process page is "
<< pcb->get_frame(pcb->get_program_counter() / (PAGE_SIZE))
<< "\nProgram Counter is "
<< pcb->get_program_counter()
<< '\n';
return;
}
if (pcb->get_status() == RUNNING)
{ // Decodes and Executes Instruction
CPU->decode_and_execute(instruct, pcb);
}
if (pcb->get_status() == WAITING)
{
Dispatcher::switchOut(CPU, pcb);
ShortTermScheduler::RunningToWait(pcb);
break;
}
// Increment Program counter
pcb->increment_PC();
//increument cpu cycle
CPU->current_cycle++;
//osdriver cycle increument
current_cycle++;
}//while loop
// Calculating Max Frames
int vPages = 0;
for (unsigned int i = 0; i < pcb->get_page_table_length(); i++)
{
if (pcb->is_valid_page(i))
vPages++;
}
if (vPages > pcb->get_max_frames())
{
pcb->set_max_frames(vPages);
}
// If process is terminated. Throw it into the Terminated Queue
if (pcb->get_status() == TERMINATED)//if process not in waiting
{ // Since the Processes 'Should' be completed, it will be thrown into the TerminatedQueue
pcb->set_end_clock();
terminatedQueue.setLock();
terminatedQueue.addProcess(pcb);
printOutPut(pcb);
terminatedQueue.freeLock();
std::cout << "terminated :" << pcb->get_pid() << "\n";
printf("dump pcb start\n");
LongTerm::DumpProcess(pcb);
printf("dump pcb end\n");
}
Hardware::FreeHardware(pcb->get_resource_status());//free resource for other processes
CPU->freeLock();//free cpu lock when thread is completed
}
bool CheckRunLock(cpu * CPU)
{
bool there = false;
readyQueue.setLock();
if (CPU != nullptr && readyQueue.size() > 0)
{
there = true;
}
readyQueue.freeLock();
return there;
}
bool waitingQsize()
{
bool there = false;
waitingQueue.setLock();
if (waitingQueue.size() > 0)
{
there = true;
}
waitingQueue.freeLock();
return there;
}
bool TerminateQsize(int totalJobs)
{
bool there = false;
terminatedQueue.setLock();
if (terminatedQueue.size() < totalJobs )
{
there = true;
}
terminatedQueue.freeLock();
return there;
}
void OSDriver::run(std::string fileName) {
// Load to Disk
PCB * pcb;
programEnd = false;
std::thread RUN(RunClock);
if (RUN.joinable() == true)
{
RUN.detach();
}
ldr.readFromFile(fileName);
// Does an initial load from Disk to RAM and ReadyQueue
// loads only 4 pages per process
debug_printf("Running Long term Scheduler%s", "\n");
totalJobs = LongTerm::initialLoad();
#if (defined DEBUG || defined _DEBUG)
debug_printf("Beginning MEMORY%s","\n");
MEM.dump_data("Begin_RAM");
DISK.dump_data("Begin_DISK");
#endif
debug_printf("Finished with LongTerm Schdeduler%s","\n");
// Runs as long as the ReadyQueue is populated as long as there are
// processes to be ran
cpu* CPU = CpuPool.FreeCPU();
while(TerminateQsize(totalJobs))
{
try {
if (CheckRunLock(CPU))
{
debug_printf("CPU is not null and ready queue is > 0%s","\n");
if (CPU->getLock() == FREE)//check if cpu is still free
{
debug_printf("CPU is not Locked.%s","\n");
run_shortts(CPU);// Context Switches for the next process
if (CPU->getLock() == LOCK)//make sure cpu is locked with a process first
{
std::thread RUN(run_cpu, CPU, CPU->getProcess(), ¤t_cycle);
if (RUN.joinable() == true)
{
debug_printf("Creating new thread%s","\n");
RUN.detach();
}
}
}
}
else {
debug_printf("CPU is null or ready queue is not > 0%s","\n");
}
}
catch (const char* e) {
// malfunctions print out
printf("%s\n",e);
}
if (waitingQsize())//check if its greater than 0
{
debug_printf("Waiting Queue has things%s", "\n");
waitingQueue.setLock();
pcb = waitingQueue.getProcess();
waitingQueue.freeLock();
if (pcb->get_waitformmu() == true)
{
if (pcb->get_lastRequestedPage() < 256)
{ //get requested frame
if(ltSched.loadPage(pcb, pcb->get_lastRequestedPage()))
{
//if frame is aquired than set the wait for mmu event to false
pcb->set_page_fault_end_clock();
pcb->set_waitformmu(false);
}
else
{
if (ltSched.FrameSize() == 0)
{
//free up frames if there are no more frames left for
//processes in ready queue
waitingQueue.setLock();
LongTerm::DumpFrame(pcb);
debug_printf("Dumping Frame%s", "\n");
waitingQueue.freeLock();
}
}
}
}
}
// run short time scheduler to move processes
// from wait queue to ready or vice versa
run_sortsch();
CPU = CpuPool.FreeCPU(); //find free cpu to schedule next item in ready queue
//debug_printf("This is doing stuff still%s", "\n");
}
programEnd = true; //stop cpu clock;
#if (defined DEBUG || defined _DEBUG)
MEM.dump_data("End_RAM"); //memory dump
DISK.dump_data("End_DISK");
#endif
long int wtime;
long int ttime;
for (unsigned int i = 0; i < process_list.size(); i++)
{
wtime = process_list[i].get_wait_time_clock(); // Wait Time
ttime = process_list[i].get_exec_time_clock(); // Total Time
std::cout << "\n\nProcess id: " << process_list[i].get_pid()
<< "\nIO count: " << process_list[i].get_io_count()
<< "\nMaxFrames: " << process_list[i].get_max_frames()
<< "\nMaxRam:" << (process_list[i].get_max_frames() * PAGE_SIZE)
<< "\nPercentCache:" << ((float)(process_list[i].get_cache_hit()) / (float)(process_list[i].get_cache_hit() + process_list[i].get_cache_miss()) * 100)
<< "\ncpu0 count:" << process_list[i].get_cpu0_count()
<< "\ncpu1 count: " << process_list[i].get_cpu1_count()
<< "\ncpu2 count: " << process_list[i].get_cpu2_count()
<< "\ncpu3 count: " << process_list[i].get_cpu3_count()
<< "\nPageFault count: " << process_list[i].get_page_fault_count()
<< "\nFaultServiceTime: " << process_list[i].get_page_fault_time_clock()
<< "\nWait Time : " << wtime
<< "\nRun Time : " << (ttime - wtime) << std::endl;
}
}
void OSDriver::run_sortsch() {
// Populate RAM and ReadyQueue
// Checks to see if any process in the Ready Queue should be moved to
// Waiting Queue, then moves it
StSched.ReadyToWait();
// Checks to see if any process in the Waiting Queue should be moved to
// Ready Queue, then moves it
StSched.WaitToReady();
}
bool checkReadyQsize()
{
bool there;
readyQueue.setLock();
if (!readyQueue.empty())
{
there = true;
}
else
{
there = false;
}
readyQueue.freeLock();
return there;
}
void OSDriver::run_shortts(cpu * CPU) {
// Dispatches the current Processes. Context Switches In AND Out
if (checkReadyQsize())
{
Dispatch.dispatch(CPU, CPU->getProcess());
if (current_cycle >= cpu_cycle)
current_cycle = 0;
}
}
void OSDriver::ClearCPU(unsigned int CpuID, unsigned int p_id)
{
//clear cpu registers if same cpu doesn't take over process it was running
//previously
CPU_Pool::clearCpu(CpuID, p_id);
}
|
The Elkhorn Grill offers delicious dining prepared fresh daily on-site by our executive chef and culinary team, featuring an extensive menu of continental and regional specialties, a full bar, delectable desserts and appetizers, and a warm, welcoming ambience, with two large-screen TVs for watching the game with family and friends.
The same high-quality fare can be enjoyed during private events held at the club.
For more information, please call (972) 390-8888. |
A proud South Carolina Native and Surfside Beach Resident/ Home Owner with over two decades of Experience as a SC Licensed REALTOR® and Broker Associate, Jennifer "JENN" Cribb is your best choice when Buying and/or Selling Real Estate along our Coast. Jenn makes a lasting connection with all of her clients and dedicates herself to their unique needs. "Every Client deserves and receives the Best Service, Fiduciary protection as well as Guidance through the sometimes confusing world of Real Estate… this enables them to make clear-minded, solid decisions. There is something very special in helping my clients purchase their very First Home, that unique beach Cottage Getaway and of course, the Well-Deserved Retirement Nest … that said, when Buying or Selling Real Estate, every Client should be treated with the utmost respect and care”, says Jenn Cribb. Serving the entire South Strand including Surfside Beach, Garden City Beach, Murrells Inlet, Litchfield Beaches, Pawleys Island & Georgetown. |
Q. When is the Sarah Gillespie Museum open?
The Sarah Gillespie Museum is generally open Monday through Friday from 1pm to 4pm except during university holidays. Summer viewing by appointment only.
For more information about the museum, call 601-318-6561. |
PT. PUTRINDO EMPAT LESTARI is a full service Spa Management companyoffering consulting, development and operating services for Spas in Southeast Asia, Australia and China. In addition to supplying products and managing the spa facilities of other companies. PT. Putrindo Empat Lestari also owns and operates several spa of its own. PT. PEL, otherwise known as Jamu Traditional Spa, is a progressive company with an evolving holistic vision towards overall wellness. Drawing inspiration from ancient Indonesian healing and beauty practices, Jamu Traditional Spa is recognized for its use of natural products that are prepared to time-tested recipes.
Adhering to the principle that a healthy mind and body is the foundation on which to enjoy life’s beauty, Jamu Spa has created a collection of treatments designed to nourish and revitalize.
JAMU Traditional Spa in Sanur located at Tandjung Sari Hotel is set within a beautiful facility with the Balinese Village and Beach Bungalow with theme of the resort.
Massage, Lulur Scrub, Yoghurt Treatment, Fragrant Bath, Body Lotion Rub. The beautifying and fragrant Lulur Treatment Originates in the royal palaces of Central Java, Indonesian, where it is still used to enhance the beauty of the bridge before her wedding. Recommended for youthful and oily skin.
Massage, Boreh Mask, Spice Bath. Boreh is a traditional remedy that has been handed down from generation to generation, and each village in Bali has its own special recipe. Benefit: Warms & penetrates aching muscles, helps combat colds & flu. 03.
Massage, Mangir Scrub, Fragrant Bath, Body Lotion Rub. Our Mangir is made is accordance to a traditional recipe from rice, various spices, freshly grated coconut and flowers. This treatment is both deeply cleansing and hydrating, and leaves the skin soft and glowing.
Massage, Coffee Mocha Scrub, Coconut Milk Bath, Body Lation Rub. A rub down with Vanilla Bean Body Lotion is the perfect end to this deliciously aromatic indulgence. Gentlemen will especially enjoy this brisk body scrub.
Massage, Warm Tea Leaf & Chrysanthenum Scrub, Green Tea Bath, Body Lotion Rub. Our treatment starts when our warm Tea Leaf and Chrysanthenum scrub is massaged onto the body to exfoliate and smooth the skin. Then steaming towel and hot stone are placed onto the body to allow the scrub nutrients to be absorbed. Finish off with a fragrant green tea bath and a gentle Cananga body lotion rub.
Kemiri Massage, Sirih Bath, Body Lotion Rub. This ancient beauty treatment originated in the mountain villages of Indonesia and was used as a natural body soap to cleanse the skin.
Stomach Massage, Selendang Body Bind, Fragrant Bath, Body Lotion Rub. This body wrap treatment is a 40 day ritual for Indonesian women after giving birth. It is believed to help flush out bacteria which gathers in the body after child-birth and re-stores the body. Helps the lymphatic system function, reawakens the body´s organs cleanses and heals.
These refreshing Jamu Treatment are based on the centuries-old beauty ritual of In-donesian, and are designed to cleanse, balance, relax and heal. Each treatment is 1,5 hour.
After a 50-minures massage using crushed Kemiri Nuts, a fresh preparation of Papaya, Kemiri Mild and Mint leaf lotion is smoothed all over the body and wrapped with banana leaves to aid in the absorption of nutrients. Afterwards, relax in a warm floral bath.
The treatment begins with a 50-minute Kemiri massage scrub and is followed with the application of a Beauty Mask made from a combination of pure white clay freshly cut Roses, Tuber Rose, Jasmine and Frangipani. Fresh honey yoghurt is then applied to nour-ish and hydrate the skin before indulging in a fragrant flower bath.
This calming treatment begins with a cool, floral bath to reduce skin inflammation. The skin is then drenched with a special lotion prepared from fresh Aloe Vera Gel and sooth-ing Lavender Essential Oil.
01. Papaya, Kemiri, Mint Body Wrap ( 1,5 Hours ) Packages Price USD 85.00 After a 50-minures massage using crushed Kemiri Nuts, a fresh preparation of Papaya, Kemiri Mild and Mint leaf lotion is smoothed all over the body and wrapped with banana leaves to aid in the absorption of nutrients. Afterwards, relax in a warm floral bath. |
Doctors will find it easier to tell whether a patient has Alzheimer's disease or another kind of dementia with a new method of using MRI scans, researchers from Perelman School of Medicine and Frontotemporal Degeneration Center at the University of Pennsylvania explained in the journal Neurology.
The scientists say they could fairly accurately identify Alzheimer's disease and frontotemporal lobar degeneration without having to carry out invasive tests, such as a lumbar puncture, which involves sticking a needle into the spine. At the moment, diagnosing dementia is a struggle for doctors, which often results in delayed treatment. Invasive tests can help, but patients find them unpleasant.
Although their underlying disease processes are quite different, FTLD (frontotemporal lobar degeneration) and Alzheimer's disease can frequently share the same symptoms, making it hard for experts to make an accurate diagnosis.
Patients with Alzheimer's or FTLD both experience confusion and forgetfulness - their diseases/conditions can affect their emotions, behavior and personalities.
Duke University researchers recently found that by combining the results of three tests, doctors could more accurately diagnose Alzheimer's disease. The tests included MRI, fluorine 18 fluorodeoxyglucose positron emission tomography (FDG-PET), and cerebrospinal fluid analysis (lumbar puncture).
Finnish researchers developed a software tool that could reduce the average time to reach a diagnosis of Alzheimer's from 20 months to 10 months.
"Diagnosis can be challenging. If the clinical symptoms and routine brain MR are equal, an expensive positron emission tomography (PET) scan might be needed. Or, a lumbar puncture, which involves inserting a needle into the spine, would be needed to help make the diagnosis.
Analysis of the cerebrospinal fluid gives us reliable diagnostic information, but this is not something patients look forward to and is also expensive. Using this new MRI method is less expensive and definitely less invasive."
McMillan and team carried out a study involving 185 participants. They had all been diagnosed with a neurodegenerative disease which indicated either FTLD or Alzheimer's. They underwent a high resolution MRI scan as well as a lumbar puncture. Diagnosis was confirmed in 32 of the participants either by autopsy or by determining that they had a genetic mutation linked with either FTLD or Alzheimer's.
The team wanted to determine whether they could dispense with the lumbar puncture altogether and predict brain protein levels by using just MRI brain scans.
The MRI scans were used to predict the ratio of two biomarkers of FTLD or Alzheimer's - the proteins tau and beta-amyloid - in the lumbar punctures (cerebrospinal fluid).
They found that by studying the structural brain patterns - the density of gray matter - on the MRI scans, their predictions were 75% accurate when confirming diagnosis with people who had pathology-confirmed diagnoses and those with biomarker levels retrieved from lumbar punctures - this shows that the new MRI use is as accurate as lumbar puncture methods.
"Developing a new method for diagnosis is important because potential treatments target the underlying abnormal proteins, so we need to know which disease to treat. This could be used as a screening method and any borderline cases could follow up with the lumbar puncture or PET scan.
This method would also be helpful in clinical trials where it may be important to monitor these biomarkers repeatedly over time to determine whether a treatment was working, and it would be much less invasive than repeated lumbar punctures."
A study published this month found that globally, deaths from Alzheimer's and other dementia have risen more than three-fold over the last three decades.
"Can MRI screen for CSF biomarkers in neurodegenerative disease?"
Nordqvist, Christian. "Is It Alzheimer's Or Another Dementia? MRI Scan Can Tell." Medical News Today. MediLexicon, Intl., 28 Dec. 2012. Web. |
Realtek High Definition Audio is a MEDIA device. This driver was developed by Realtek. The hardware id of this driver is HDAUDIO/FUNC_01&VEN_10EC&DEV_0892&SUBSYS_146210B2.
This driver received an average rating of 3.8 stars out of 42629 votes. |
/*
* Copyright 2013 Google Inc. All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.google.errorprone.refaster;
import static com.google.common.base.Preconditions.checkArgument;
import com.google.auto.value.AutoValue;
import com.google.common.collect.ImmutableList;
import com.google.common.collect.Iterables;
import com.sun.source.tree.ClassTree;
import com.sun.source.tree.MethodTree;
import com.sun.source.tree.ModifiersTree;
import com.sun.source.tree.Tree;
import com.sun.source.tree.TreeVisitor;
import com.sun.source.tree.TypeParameterTree;
import com.sun.tools.javac.tree.JCTree;
import com.sun.tools.javac.tree.JCTree.JCClassDecl;
import com.sun.tools.javac.util.List;
import java.util.Iterator;
import javax.annotation.Nullable;
import javax.lang.model.element.Name;
/**
* {@code UTree} representation of a {@code ClassTree} for anonymous inner class matching.
*
* @author [email protected] (Louis Wasserman)
*/
@AutoValue
abstract class UClassDecl extends UStatement implements ClassTree {
public static UClassDecl create(UMethodDecl... members) {
return create(ImmutableList.copyOf(members));
}
public static UClassDecl create(Iterable<UMethodDecl> members) {
checkArgument(Iterables.size(members) <= 1,
"UClassDecl does not currently support multi-method anonymous classes");
return new AutoValue_UClassDecl(ImmutableList.copyOf(members));
}
@Override
@Nullable
public Unifier visitClass(ClassTree node, @Nullable Unifier unifier) {
// We want to skip e.g. autogenerated init members, so we do this by hand...
Iterator<UMethodDecl> membersItr = getMembers().iterator();
for (Tree targetMember : node.getMembers()) {
if (targetMember instanceof MethodTree) {
MethodTree targetMethodDecl = (MethodTree) targetMember;
if (targetMethodDecl.getReturnType() != null) {
unifier = membersItr.hasNext()
? membersItr.next().unify(targetMethodDecl, unifier)
: null;
}
}
}
return membersItr.hasNext() ? null : unifier;
}
@Override
public JCClassDecl inline(Inliner inliner) throws CouldNotResolveImportException {
return inliner.maker().AnonymousClassDef(
inliner.maker().Modifiers(0L),
List.convert(JCTree.class, inliner.inlineList(getMembers())));
}
@Override
public <R, D> R accept(TreeVisitor<R, D> visitor, D data) {
return visitor.visitClass(this, data);
}
@Override
public Kind getKind() {
return Kind.CLASS;
}
@Override
public UTree<?> getExtendsClause() {
return null;
}
@Override
public ImmutableList<UTree<?>> getImplementsClause() {
return ImmutableList.of();
}
@Override
public abstract ImmutableList<UMethodDecl> getMembers();
@Override
public ModifiersTree getModifiers() {
return null;
}
@Override
public Name getSimpleName() {
return null;
}
@Override
public ImmutableList<TypeParameterTree> getTypeParameters() {
return ImmutableList.of();
}
}
|
// Copyright 2018 Google LLC
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package com.google.api.ads.adwords.jaxws.v201809.cm;
import javax.xml.bind.annotation.XmlAccessType;
import javax.xml.bind.annotation.XmlAccessorType;
import javax.xml.bind.annotation.XmlRootElement;
import javax.xml.bind.annotation.XmlType;
/**
*
* Returns a list of CampaignSharedSets based on the given selector.
* @param selector the selector specifying the query
* @return a list of CampaignSharedSet entities that meet the criterion specified
* by the selector
* @throws ApiException
*
*
* <p>Java class for get element declaration.
*
* <p>The following schema fragment specifies the expected content contained within this class.
*
* <pre>
* <element name="get">
* <complexType>
* <complexContent>
* <restriction base="{http://www.w3.org/2001/XMLSchema}anyType">
* <sequence>
* <element name="selector" type="{https://adwords.google.com/api/adwords/cm/v201809}Selector" minOccurs="0"/>
* </sequence>
* </restriction>
* </complexContent>
* </complexType>
* </element>
* </pre>
*
*
*/
@XmlAccessorType(XmlAccessType.FIELD)
@XmlType(name = "", propOrder = {
"selector"
})
@XmlRootElement(name = "get")
public class CampaignSharedSetServiceInterfaceget {
protected Selector selector;
/**
* Gets the value of the selector property.
*
* @return
* possible object is
* {@link Selector }
*
*/
public Selector getSelector() {
return selector;
}
/**
* Sets the value of the selector property.
*
* @param value
* allowed object is
* {@link Selector }
*
*/
public void setSelector(Selector value) {
this.selector = value;
}
}
|
/*
* DocuSign REST API
*
* The DocuSign REST API provides you with a powerful, convenient, and simple Web services API for interacting with DocuSign.
*
* OpenAPI spec version: v2.1
* Contact: [email protected]
* Generated by: https://github.com/swagger-api/swagger-codegen.git
*/
using System;
using System.Linq;
using System.IO;
using System.Text;
using System.Text.RegularExpressions;
using System.Collections;
using System.Collections.Generic;
using System.Collections.ObjectModel;
using System.Runtime.Serialization;
using Newtonsoft.Json;
using Newtonsoft.Json.Converters;
using System.ComponentModel.DataAnnotations;
using SwaggerDateConverter = DocuSign.eSign.Client.SwaggerDateConverter;
namespace DocuSign.eSign.Model
{
/// <summary>
/// BulkProcessingListSummaries
/// </summary>
[DataContract]
public partial class BulkProcessingListSummaries : IEquatable<BulkProcessingListSummaries>, IValidatableObject
{
public BulkProcessingListSummaries()
{
// Empty Constructor
}
/// <summary>
/// Initializes a new instance of the <see cref="BulkProcessingListSummaries" /> class.
/// </summary>
/// <param name="BulkListSummaries">BulkListSummaries.</param>
public BulkProcessingListSummaries(List<BulkProcessingListSummary> BulkListSummaries = default(List<BulkProcessingListSummary>))
{
this.BulkListSummaries = BulkListSummaries;
}
/// <summary>
/// Gets or Sets BulkListSummaries
/// </summary>
[DataMember(Name="bulkListSummaries", EmitDefaultValue=false)]
public List<BulkProcessingListSummary> BulkListSummaries { get; set; }
/// <summary>
/// Returns the string presentation of the object
/// </summary>
/// <returns>String presentation of the object</returns>
public override string ToString()
{
var sb = new StringBuilder();
sb.Append("class BulkProcessingListSummaries {\n");
sb.Append(" BulkListSummaries: ").Append(BulkListSummaries).Append("\n");
sb.Append("}\n");
return sb.ToString();
}
/// <summary>
/// Returns the JSON string presentation of the object
/// </summary>
/// <returns>JSON string presentation of the object</returns>
public string ToJson()
{
return JsonConvert.SerializeObject(this, Formatting.Indented);
}
/// <summary>
/// Returns true if objects are equal
/// </summary>
/// <param name="obj">Object to be compared</param>
/// <returns>Boolean</returns>
public override bool Equals(object obj)
{
// credit: http://stackoverflow.com/a/10454552/677735
return this.Equals(obj as BulkProcessingListSummaries);
}
/// <summary>
/// Returns true if BulkProcessingListSummaries instances are equal
/// </summary>
/// <param name="other">Instance of BulkProcessingListSummaries to be compared</param>
/// <returns>Boolean</returns>
public bool Equals(BulkProcessingListSummaries other)
{
// credit: http://stackoverflow.com/a/10454552/677735
if (other == null)
return false;
return
(
this.BulkListSummaries == other.BulkListSummaries ||
this.BulkListSummaries != null &&
this.BulkListSummaries.SequenceEqual(other.BulkListSummaries)
);
}
/// <summary>
/// Gets the hash code
/// </summary>
/// <returns>Hash code</returns>
public override int GetHashCode()
{
// credit: http://stackoverflow.com/a/263416/677735
unchecked // Overflow is fine, just wrap
{
int hash = 41;
// Suitable nullity checks etc, of course :)
if (this.BulkListSummaries != null)
hash = hash * 59 + this.BulkListSummaries.GetHashCode();
return hash;
}
}
public IEnumerable<ValidationResult> Validate(ValidationContext validationContext)
{
yield break;
}
}
}
|
In the VLF-range signals from transmitters and jammers can be received.
The following table contains the most important signals in the range under 24 kHz. One should not expect to receive all stations at the same time. Some of the specified stationa are only few minutes per week active. Since these stations nearly all for the transmission of news to submerged submarines of naval forces, no transmission plans are available. Also a decoding of the signals might not succeed. One can enjoy however frequently about the signals on the spectrograms.
This page was last edited on 19 August 2017, at 18:37. |
I'm happy because it's my birthday in 2 days and I'm celebrating with my friends tonight.
I like this question. I would go to Italy and buy myself a mansion with olive fields. I hope $10,000 is enough for that.
I've been reading The Help by Kathryn Stockett. I quite like it so far, I like the way it's written.
Usually it does, but this year there has been very little snow. Last year, we had snowdrift's that were as tall as a grown man.
TPBM will be visited by Santa tonight?
Yes, I have. I've got about five chapters posted, but I haven't had time to post again in some time.
TPBM is spending Christmas with family?
Topic: Current status, mood, etc.
Re: Current status, mood, etc. |
<html>
<head>
<title>RunUO Documentation - Class Overview - Body</title>
</head>
<body bgcolor="white" style="font-family: Courier New" text="#000000" link="#000000" vlink="#000000" alink="#808080">
<h4><a href="../namespaces/Server.html">Back to Server</a></h4>
<h2>Body</h2>
(<font color="blue">ctor</font>) Body( <font color="blue">int</font> bodyID )<br>
<font color="blue">int</font> BodyID( <font color="blue">get</font>; )<br>
<font color="blue">bool</font> IsAnimal( <font color="blue">get</font>; )<br>
<font color="blue">bool</font> IsEmpty( <font color="blue">get</font>; )<br>
<font color="blue">bool</font> IsEquipment( <font color="blue">get</font>; )<br>
<font color="blue">bool</font> IsFemale( <font color="blue">get</font>; )<br>
<font color="blue">bool</font> IsGhost( <font color="blue">get</font>; )<br>
<font color="blue">bool</font> IsHuman( <font color="blue">get</font>; )<br>
<font color="blue">bool</font> IsMale( <font color="blue">get</font>; )<br>
<font color="blue">bool</font> IsMonster( <font color="blue">get</font>; )<br>
<font color="blue">bool</font> IsSea( <font color="blue">get</font>; )<br>
<!-- DBG-0 --><a href="BodyType.html">BodyType</a> Type( <font color="blue">get</font>; )<br>
<font color="blue">virtual</font> <font color="blue">bool</font> Equals( <font color="blue">object</font> o )<br>
<font color="blue">virtual</font> <font color="blue">int</font> GetHashCode()<br>
<font color="blue">virtual</font> <font color="blue">string</font> ToString()<br>
</body>
</html>
|
Up in Biceps and triceps About Come up with My Customizable Report?
They typically take advantage of zero cost dissertations in order to appreciate the significant data format. They should invariably be aware essays and expression reports get their unique exclusive formats and various kinds of content. Should certainly you need to obtain an essay online, our selection of skilled authorities is prepared to supply enable. Make an effort to remember, the achievements of this papers is determined by the efficiency of speaking with your personal unique essay writer. There have been not any good freelance writers in and around. Right after it’s tremendously treasured to ascertain specialist-levels composing, it will also steer individuals to foolishly definitely feel their authoring won’t be sufficiently good to choose a prospering plan. Then again complex it is actually to compose an article, our experts can cope at any difficulty. You don’t know regardless if the writer is just pretending as being really good. Lies You’ve Been Explained to About Jot down My Unique Document As a substitute, you would want to utilize a good enterprise, like ours. Every person simply want to experience protected when simply using a service or simply a goods. Be prepared to get results really hard or change to our companies designed to assist you when you involve it quite possibly the most. That is why, you may possibly not neglect their high-quality. Moreover, an individual will seldom look for a assistance that can produce a innovative test in 1 hour, but our professionals masterpaper can. While you pay for an essay, you can be assured with regards to the caliber of our specialist expert services.
Our crafting small business is considered the most favored in British isles. If you ever will have to achieve your editor, you generally have the choice to email him a one on one sales message within our shopper hospitable solution board. You can rest assured that the tailor made forms that many of us publish are plagiarism-completely free When utilizing an agency for tailor-made journal making, you need to be certain to utilize one which will probably be several your little bit of perform will likely be properly and utterly free of plagiarism. A little more about what you would get at our individualized essay system Getting an outstanding cardstock is a must, but we could supply you with much more! In spite of this very hard the pieces of paper you’ll be required to write is, with the help of our group, we’ll supply you specifically what you will like. So, you may be confident your school assignment help support might be sent by the use of a professional. Posting a research pieces of paper can be an a little overwhelming chore. The dblp Computer system Technology Bibliography is actually a online barometer of vital personal pc scientific disciplines periodicals. The Not So Good Hidden secret of Generate My Custom made Newspaper Whether it respect school newspapers, in some cases it could stop easy to accomplish all due dates and stay with significant school criteria. When using the absolutely free revision opportunity presented for all the people, you can get your document improved and considerably improved at absolutely no sale price. Every now and then, even a wide range of assignments had been offered out mutually, and also you simply are unable to find the illumination during the good with the tunnel.
Caused by this, as a result of our authors accomplishing our clients’ instructions, every one of them provides a standing up. Virtually every guarantee our faculty cardstock available on the market internet site makes indicates automatically which our office staff continue which keeps the make certain and complete your order during the maximal degree underneath any disorders. What you must do is always to complete the investment develop, complete a check, plus a few moments, you’re getting your confidential essay helper. But Have You Thought About Produce My Custom Document? Students also utilize totally free thesis ideas for lots of facets. Some students may use a free of charge school assignment for any implies to learn more about the suitable formatting. All students make an effort to obtain an fully free of charge study pieces of paper that they may use as his or her unique mission draft or illustration of best suited sort and trendy. An additional topic is basically that you might vice versa choose the issue that’s extremely hackneyed and won’t impress a professor. For instance, an entirely free of charge reserve insider report will supply an indicator of newsletter statement design. In case you demand a extensive analysis together with valued studies, we are going to be thrilled to give it you, and you’re visiting recognize that pretty much everything will most likely be played over the strongest magnitude. |
<?php
/**
* CodeIgniter
*
* An open source application development framework for PHP 5.2.4 or newer
*
* This content is released under the MIT License (MIT)
*
* Copyright (c) 2014, British Columbia Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* @package CodeIgniter
* @author EllisLab Dev Team
* @copyright Copyright (c) 2008 - 2014, EllisLab, Inc. (http://ellislab.com/)
* @copyright Copyright (c) 2014, British Columbia Institute of Technology (http://bcit.ca/)
* @license http://opensource.org/licenses/MIT MIT License
* @link http://codeigniter.com
* @since Version 1.0.0
* @filesource
*/
defined('BASEPATH') OR exit('No direct script access allowed');
$lang['cal_su'] = 'Pz';
$lang['cal_mo'] = 'Pt';
$lang['cal_tu'] = 'Sa';
$lang['cal_we'] = 'Ça';
$lang['cal_th'] = 'Pe';
$lang['cal_fr'] = 'Cu';
$lang['cal_sa'] = 'Ct';
$lang['cal_sun'] = 'Paz';
$lang['cal_mon'] = 'Pzt';
$lang['cal_tue'] = 'Sal';
$lang['cal_wed'] = 'Çar';
$lang['cal_thu'] = 'Per';
$lang['cal_fri'] = 'Cum';
$lang['cal_sat'] = 'Cts';
$lang['cal_sunday'] = 'Pazar';
$lang['cal_monday'] = 'Pazartesi';
$lang['cal_tuesday'] = 'Salı';
$lang['cal_wednesday'] = 'Çarşamba';
$lang['cal_thursday'] = 'Perşembe';
$lang['cal_friday'] = 'Cuma';
$lang['cal_saturday'] = 'Cumartesi';
$lang['cal_jan'] = 'Oca';
$lang['cal_feb'] = 'Şub';
$lang['cal_mar'] = 'Mar';
$lang['cal_apr'] = 'Nis';
$lang['cal_may'] = 'May';
$lang['cal_jun'] = 'Haz';
$lang['cal_jul'] = 'Tem';
$lang['cal_aug'] = 'Ağu';
$lang['cal_sep'] = 'Eyl';
$lang['cal_oct'] = 'Eki';
$lang['cal_nov'] = 'Kas';
$lang['cal_dec'] = 'Ara';
$lang['cal_january'] = 'Ocak';
$lang['cal_february'] = 'Şubat';
$lang['cal_march'] = 'Mart';
$lang['cal_april'] = 'Nisan';
$lang['cal_mayl'] = 'Mayıs';
$lang['cal_june'] = 'Haziran';
$lang['cal_july'] = 'Temmuz';
$lang['cal_august'] = 'Ağustos';
$lang['cal_september'] = 'Eylül';
$lang['cal_october'] = 'Ekim';
$lang['cal_november'] = 'Kasım';
$lang['cal_december'] = 'Aralık';
/* End of file calendar_lang.php */
/* Location: ./application/language/turkish/calendar_lang.php */ |
Info on geek jewelry for couples.
After you get the ideal settings for your handmade jewelry you will find you can easily adjust them for different pieces. The expense of these jewelry mainly is contingent regarding the stones along with metal used by this use. By grouping your current jewelry collection, you will allow you to seeing exactly how much jewelry you have got and commence to notice similarities relating to the pieces which you possess.
Search phrases for this specific billet are generally jewelry articles, geek jewelry for couples, beauty, creativeness. |
It’s really the perfect location! Centrally located on Buffalo Speedway between West Alabama and Richmond Avenue in Houston’s most prominent neighborhood and business centers.
Experience the upgraded amenities and designer interiors of upscale apartment living at the Park at River Oaks. Located in vibrant Houston, Texas, residents are only steps away from top shopping, dining and entertainment venues including the River Oaks Shopping Center and downtown's lively theater district. Apartments are offered in multiple one, two, and three-bedroom floorplans, and designer upgrades like bay windows, patio French doors, and separate shows and tubs add a sense of style and comfort. This cat-friendly neighborhood also features gated access which is manned 24 hours a day for an added sense of security.
Within the community, residents have a variety of leisure options available in the privacy of their neighborhood. The centrally located courtyard features two dazzling swimming pools, one for relaxing and another for swimming laps. These hot spots are surrounded by a large sunning area, equipped with three separate grilling areas. A state-of-the-art fitness center featuring big-screen televisions is open 24/7, so residents can work around their busy schedules. Take a tour of the Park at River Oaks today and experience the best of luxury living in Houston. |
Flowers are universal language by themselves and flower delivery is akin to speaking to the ricipient. Whether it is moment of happiness, triumph, commemoration or whether it is moment of expressing love or gratitude. The right arragement of flowers can convey your sentiments much better than a milion words ever will.
Vietnam Flower Network is the largest Vietnam flower delivery network. Flower delivery service across the Vietnam with over 10 successful year of expertise in online market. Using our online florist service to send your message of love, congratulations or sympathy is very simple.
Quick flower delivery and great customer service: We can send flowers to recipient within 2 hours after ordering in Hanoi, Ho Chi Minh, Hai Phong, Nha Trang…. We offer free shipping, sam-day delivery for all order send fresh flower to major city. Our local Vietnam Florist delivers premium quality flowers and flower arrangement all across Vietnam without shipping fee.
Send flowers online for all occasions and holiday. Whether you need a happy women’day bouquet, a rose anabled “I love you” or a basket of birthday flowers. At Vietnam Flower Network, you’ll find exactly what you are looking for to cover every occasion: Happy new year, women’s day, Valentine’s day, mother day, thanksgiving or congratulations…. |
The Italian Alpine Flower Essence Collection is available here and contains three of the most powerful new flower essences that people are calling for in these intense times.
The flowers from the Italian Alps are very special, and carry important patterns for healing and growth. These essences were made from the fresh clean springs of the Italian Alps, and three of the lovely flowers growing in the meadows and high elevations.
While each of the three flowers (Bavarian Saxifrage, Fleur de Soleil, and Bavarian Gentian) each have a special message and pattern to help us successfully traverse challenging times now and ahead, there is yet another new formula made for this collection ~ which contains the essences of all three.
Read on to learn how and why we decided to combine these flowers for a very special combination formula ~ the fourth and final Italian Alpine Flower Essence for 2008. |
Today this beauty get’s married in the Payson LDS temple and I am so excited to photograph their wedding! Melissa and I went on a little hike to a lake up Payson Canyon. It was such a cute little lake and there were seriously TONS of fishers. It was so fun to chat with the those fishing and to find out if they caught any. Of course everyone couldn’t get over how beautiful Melissa looks. She is absolutely stunning and Jesse is a lucky guy to be sealed to her for time and all eternity. One cool thing about their wedding is that they will be married in the Payson Temple. The Payson Temple just opened on Sunday, so this is a big weekend for the temple! In fact, they have about 6 weddings an hour there. It will seriously be so busy full of beautiful brides. ALL the photographers in the area are dying to photograph this temple and I feel so blessed to be able to capture a wedding this weekend! It’s a beautiful temple with a beautiful location. Melissa and I took a few pictures at the temple already, but it will be fun today to take some of her and Jesse, as a married couple. They truly are a perfect couple and compliment one another so well! I am so excited for them. |
Lime and may chang, two refreshing and uplifting ingredients, are paired in a candle that promotes awareness and sharpness. Known to be an anti-bacterial, beeswax actually purifies the air when burned. Colored with eco-friendly dyes, it’s free of synthetics.
This aromatherapy candle continues the ancient practice of using natural plant essences to promote health and wellbeing. High-quality, organic essential oils are carefully blended with filtered beeswax, and no fragrance is added. Originally intended to be lit as part of a sacred ceremony, beeswax votive candles burn clean and smokeless. Made in Seattle from premium beeswax sourced from local Northwest beekeepers, this dripless candle has a long, slow burn. Each two-ounce votive candle measures 1½” x 2” and has a burn time of more than 15 hours. |
The finance core should be completed by the end of the junior year.
The course subjects listed below are recommended as suitable for many finance majors. The most suitable choices are dependent on each student’s particular background, aptitudes, and career goals. Additional recommendations are available on request from the finance area departmental adviser. |
We’d like to present just a few that have particularly nice design online. Some of these are print magazines that also publish on the Web, while some are online-only. Alert: this is by no means a ranking of the best literary magazines! Nor are we evaluating the literary style of these publications. We just want to share a sampling of those with great-looking web sites. Still, sound off in the comments, litnerds, and let us know which is your favorite, and which ones we forgot.
There have been three print issues of Minneapolis-born Paper Darts, which also publishes fiction, nonfiction, and original art online. The design is full of drawings and illustrated text, but it is not messy or cluttered. We love the hip, strange, female Frankenstein/octopus thing that shows up on the left side of every page (the litmag says it has “a beer in one tentacle and a book in another”) and we love the colors—charcoal, teal, mustard—that bring the site to life. |
// Copyright 2020 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#ifndef COMPONENTS_PAYMENTS_CONTENT_SECURE_PAYMENT_CONFIRMATION_CONTROLLER_H_
#define COMPONENTS_PAYMENTS_CONTENT_SECURE_PAYMENT_CONFIRMATION_CONTROLLER_H_
#include "base/memory/weak_ptr.h"
#include "components/payments/content/initialization_task.h"
#include "components/payments/content/payment_request_dialog.h"
#include "components/payments/content/secure_payment_confirmation_model.h"
#include "components/payments/content/secure_payment_confirmation_view.h"
namespace payments {
class PaymentRequest;
// Controls the user interface in the secure payment confirmation flow.
class SecurePaymentConfirmationController
: public PaymentRequestDialog,
public InitializationTask::Observer {
public:
explicit SecurePaymentConfirmationController(
base::WeakPtr<PaymentRequest> request);
~SecurePaymentConfirmationController() override;
SecurePaymentConfirmationController(
const SecurePaymentConfirmationController& other) = delete;
SecurePaymentConfirmationController& operator=(
const SecurePaymentConfirmationController& other) = delete;
// PaymentRequestDialog:
void ShowDialog() override;
void RetryDialog() override;
void CloseDialog() override;
void ShowErrorMessage() override;
void ShowProcessingSpinner() override;
bool IsInteractive() const override;
void ShowCvcUnmaskPrompt(
const autofill::CreditCard& credit_card,
base::WeakPtr<autofill::payments::FullCardRequest::ResultDelegate>
result_delegate,
content::WebContents* web_contents) override;
void ShowPaymentHandlerScreen(
const GURL& url,
PaymentHandlerOpenWindowCallback callback) override;
void ConfirmPaymentForTesting() override;
// InitializationTask::Observer:
void OnInitialized(InitializationTask* initialization_task) override;
// Callbacks for user interaction.
void OnDismiss();
void OnCancel();
void OnConfirm();
base::WeakPtr<SecurePaymentConfirmationController> GetWeakPtr();
private:
void SetupModelAndShowDialogIfApplicable();
base::WeakPtr<PaymentRequest> request_;
SecurePaymentConfirmationModel model_;
// On desktop, the SecurePaymentConfirmationView object is memory managed by
// the views:: machinery. It is deleted when the window is closed and
// views::DialogDelegateView::DeleteDelegate() is called by its corresponding
// views::Widget.
base::WeakPtr<SecurePaymentConfirmationView> view_;
int number_of_initialization_tasks_ = 0;
base::WeakPtrFactory<SecurePaymentConfirmationController> weak_ptr_factory_{
this};
};
} // namespace payments
#endif // COMPONENTS_PAYMENTS_CONTENT_SECURE_PAYMENT_CONFIRMATION_CONTROLLER_H_
|
/* YUI 3.9.0pr1 (build 202) Copyright 2013 Yahoo! Inc. http://yuilibrary.com/license/ */
YUI.add('datatype-date-math', function (Y, NAME) {
/**
* Date Math submodule.
*
* @module datatype-date
* @submodule datatype-date-math
* @for Date
*/
var LANG = Y.Lang;
Y.mix(Y.namespace("Date"), {
/**
* Checks whether a native JavaScript Date contains a valid value.
* @for Date
* @method isValidDate
* @param oDate {Date} Date in the month for which the number of days is desired.
* @return {Boolean} True if the date argument contains a valid value.
*/
isValidDate : function (oDate) {
if(LANG.isDate(oDate) && (isFinite(oDate)) && (oDate != "Invalid Date") && !isNaN(oDate) && (oDate != null)) {
return true;
}
else {
return false;
}
},
/**
* Checks whether two dates correspond to the same date and time.
* @for Date
* @method areEqual
* @param aDate {Date} The first date to compare.
* @param bDate {Date} The second date to compare.
* @return {Boolean} True if the two dates correspond to the same
* date and time.
*/
areEqual : function (aDate, bDate) {
return (this.isValidDate(aDate) && this.isValidDate(bDate) && (aDate.getTime() == bDate.getTime()));
},
/**
* Checks whether the first date comes later than the second.
* @for Date
* @method isGreater
* @param aDate {Date} The first date to compare.
* @param bDate {Date} The second date to compare.
* @return {Boolean} True if the first date is later than the second.
*/
isGreater : function (aDate, bDate) {
return (this.isValidDate(aDate) && this.isValidDate(bDate) && (aDate.getTime() > bDate.getTime()));
},
/**
* Checks whether the first date comes later than or is the same as
* the second.
* @for Date
* @method isGreaterOrEqual
* @param aDate {Date} The first date to compare.
* @param bDate {Date} The second date to compare.
* @return {Boolean} True if the first date is later than or
* the same as the second.
*/
isGreaterOrEqual : function (aDate, bDate) {
return (this.isValidDate(aDate) && this.isValidDate(bDate) && (aDate.getTime() >= bDate.getTime()));
},
/**
* Checks whether the date is between two other given dates.
* @for Date
* @method isInRange
* @param aDate {Date} The date to check
* @param bDate {Date} Lower bound of the range.
* @param cDate {Date} Higher bound of the range.
* @return {Boolean} True if the date is between the two other given dates.
*/
isInRange : function (aDate, bDate, cDate) {
return (this.isGreaterOrEqual(aDate, bDate) && this.isGreaterOrEqual(cDate, aDate));
},
/**
* Adds a specified number of days to the given date.
* @for Date
* @method addDays
* @param oDate {Date} The date to add days to.
* @param numDays {Number} The number of days to add (can be negative)
* @return {Date} A new Date with the specified number of days
* added to the original date.
*/
addDays : function (oDate, numDays) {
return new Date(oDate.getTime() + 86400000*numDays);
},
/**
* Adds a specified number of months to the given date.
* @for Date
* @method addMonths
* @param oDate {Date} The date to add months to.
* @param numMonths {Number} The number of months to add (can be negative)
* @return {Date} A new Date with the specified number of months
* added to the original date.
*/
addMonths : function (oDate, numMonths) {
var newYear = oDate.getFullYear();
var newMonth = oDate.getMonth() + numMonths;
newYear = Math.floor(newYear + newMonth / 12);
newMonth = (newMonth % 12 + 12) % 12;
var newDate = new Date (oDate.getTime());
newDate.setFullYear(newYear);
newDate.setMonth(newMonth);
return newDate;
},
/**
* Adds a specified number of years to the given date.
* @for Date
* @method addYears
* @param oDate {Date} The date to add years to.
* @param numYears {Number} The number of years to add (can be negative)
* @return {Date} A new Date with the specified number of years
* added to the original date.
*/
addYears : function (oDate, numYears) {
var newYear = oDate.getFullYear() + numYears;
var newDate = new Date(oDate.getTime());
newDate.setFullYear(newYear);
return newDate;
},
/**
* Lists all dates in a given month.
* @for Date
* @method listOfDatesInMonth
* @param oDate {Date} The date corresponding to the month for
* which a list of dates is required.
* @return {Array} An `Array` of `Date`s from a given month.
*/
listOfDatesInMonth : function (oDate) {
if (!this.isValidDate(oDate)) {
return [];
}
var daysInMonth = this.daysInMonth(oDate),
year = oDate.getFullYear(),
month = oDate.getMonth(),
output = [];
for (var day = 1; day <= daysInMonth; day++) {
output.push(new Date(year, month, day, 12, 0, 0));
}
return output;
},
/**
* Takes a native JavaScript Date and returns the number of days
* in the month that the given date belongs to.
* @for Date
* @method daysInMonth
* @param oDate {Date} Date in the month for which the number
* of days is desired.
* @return {Number} A number (either 28, 29, 30 or 31) of days
* in the given month.
*/
daysInMonth : function (oDate) {
if (!this.isValidDate(oDate)) {
return 0;
}
var mon = oDate.getMonth();
var lengths = [31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31];
if (mon != 1) {
return lengths[mon];
}
else {
var year = oDate.getFullYear();
if (year%400 === 0) {
return 29;
}
else if (year%100 === 0) {
return 28;
}
else if (year%4 === 0) {
return 29;
}
else {
return 28;
}
}
}
});
Y.namespace("DataType");
Y.DataType.Date = Y.Date;
}, '3.9.0pr1', {"requires": ["yui-base"]});
|
Print the free multiplication exponents algebra 1 worksheet printable optimized for printing. Algebra 1 exponents worksheets for all download and share free on bonlacfoods com. Dividing exponents with a larger or equal exponent in the dividend all positive. Endearing pre algebra worksheets negative exponents for worksheet and multiplication mytourvn. Algebra 1 unit 7 exponent rules worksheet 2 simplify each math each. |
// RUN: %check %s -fshow-inlined -finline-functions
// inline
int f(int x)
{
return x + 1;
}
int h(int);
// don't inline
int g(int x)
{
int t = x;
for(int i = 0; i < 10; i++)
t += h(i);
t++;
return t * x;
}
int main()
{
printf("%d\n", f(5)); // CHECK: note: function inlined
printf("%d\n", g(5)); // CHECK: !/function inlined/
}
|
using System;
using System.Collections;
using System.Collections.Generic;
using System.ComponentModel;
using System.Configuration.Install;
using System.Diagnostics;
using System.IO;
using System.Linq;
using System.Runtime.InteropServices;
using System.ServiceProcess;
using System.Threading.Tasks;
namespace ServiceConnect.Monitor.Installer
{
[RunInstaller(true)]
public partial class Installer : System.Configuration.Install.Installer
{
public Installer()
{
InitializeComponent();
}
public override void Install(IDictionary mySavedState)
{
InitializeComponent();
Trace.WriteLine("ServiceConnect.Monitor: Entering Install.");
// Update config
var config = File.ReadAllText(Path.GetDirectoryName(Context.Parameters["assemblypath"]) + @"\ServiceConnect.Monitor.exe.config");
config = config.Replace("localhost", Environment.MachineName);
File.WriteAllText(Path.GetDirectoryName(Context.Parameters["assemblypath"]) + @"\ServiceConnect.Monitor.exe.config", config);
try
{
var process = new Process
{
StartInfo = new ProcessStartInfo("cmd.exe", "/c sc delete ServiceConnect.Monitor")
{
CreateNoWindow = true
}
};
process.Start();
process.WaitForExit();
process = new Process
{
StartInfo = new ProcessStartInfo("cmd.exe", string.Format("/c sc create ServiceConnect.Monitor binpath= \"{0}\" start= auto", Path.GetDirectoryName(Context.Parameters["assemblypath"]) + @"\ServiceConnect.Monitor.exe"))
{
CreateNoWindow = true
}
};
process.Start();
process.WaitForExit();
process = new Process
{
StartInfo = new ProcessStartInfo("cmd.exe", "/c net start ServiceConnect.Monitor")
{
CreateNoWindow = true
}
};
process.Start();
process.WaitForExit();
}
catch (Exception ex)
{
Trace.WriteLine("Error creating windows service", ex.StackTrace);
}
Process.Start(string.Format("http://{0}:{1}", Environment.MachineName, 8100));
}
}
}
|
namespace SampleHistoryTesting
{
using System;
using System.IO;
using System.Linq;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Media;
using System.Collections.Generic;
using Ecng.Xaml;
using Ecng.Common;
using Ecng.Collections;
using Ookii.Dialogs.Wpf;
using StockSharp.Algo;
using StockSharp.Algo.Candles;
using StockSharp.Algo.Commissions;
using StockSharp.Algo.Storages;
using StockSharp.Algo.Testing;
using StockSharp.Algo.Indicators;
using StockSharp.BusinessEntities;
using StockSharp.Logging;
using StockSharp.Messages;
using StockSharp.Xaml.Charting;
using StockSharp.Localization;
public partial class MainWindow
{
// emulation settings
private sealed class EmulationInfo
{
public bool UseTicks { get; set; }
public bool UseMarketDepth { get; set; }
public TimeSpan? UseCandleTimeFrame { get; set; }
public Color CurveColor { get; set; }
public string StrategyName { get; set; }
public bool UseOrderLog { get; set; }
}
private readonly List<HistoryEmulationConnector> _connectors = new List<HistoryEmulationConnector>();
private readonly BufferedChart _bufferedChart;
private DateTime _startEmulationTime;
private ChartCandleElement _candlesElem;
private ChartTradeElement _tradesElem;
private ChartIndicatorElement _shortElem;
private SimpleMovingAverage _shortMa;
private ChartIndicatorElement _longElem;
private SimpleMovingAverage _longMa;
private ChartArea _area;
public MainWindow()
{
InitializeComponent();
_bufferedChart = new BufferedChart(Chart);
HistoryPath.Text = @"..\..\..\HistoryData\".ToFullPath();
From.Value = new DateTime(2012, 10, 1);
To.Value = new DateTime(2012, 10, 25);
}
private void FindPathClick(object sender, RoutedEventArgs e)
{
var dlg = new VistaFolderBrowserDialog();
if (!HistoryPath.Text.IsEmpty())
dlg.SelectedPath = HistoryPath.Text;
if (dlg.ShowDialog(this) == true)
{
HistoryPath.Text = dlg.SelectedPath;
}
}
private void StartBtnClick(object sender, RoutedEventArgs e)
{
InitChart();
if (HistoryPath.Text.IsEmpty() || !Directory.Exists(HistoryPath.Text))
{
MessageBox.Show(this, LocalizedStrings.Str3014);
return;
}
if (_connectors.Any(t => t.State != EmulationStates.Stopped))
{
MessageBox.Show(this, LocalizedStrings.Str3015);
return;
}
var secIdParts = SecId.Text.Split('@');
if (secIdParts.Length != 2)
{
MessageBox.Show(this, LocalizedStrings.Str3016);
return;
}
var timeFrame = TimeSpan.FromMinutes(5);
// create backtesting modes
var settings = new[]
{
Tuple.Create(
TicksCheckBox,
TicksTestingProcess,
TicksParameterGrid,
// ticks
new EmulationInfo {UseTicks = true, CurveColor = Colors.DarkGreen, StrategyName = LocalizedStrings.Str3017}),
Tuple.Create(
TicksAndDepthsCheckBox,
TicksAndDepthsTestingProcess,
TicksAndDepthsParameterGrid,
// ticks + order book
new EmulationInfo {UseTicks = true, UseMarketDepth = true, CurveColor = Colors.Red, StrategyName = LocalizedStrings.Str3018}),
Tuple.Create(
CandlesCheckBox,
CandlesTestingProcess,
CandlesParameterGrid,
// candles
new EmulationInfo {UseCandleTimeFrame = timeFrame, CurveColor = Colors.DarkBlue, StrategyName = LocalizedStrings.Str3019}),
Tuple.Create(
CandlesAndDepthsCheckBox,
CandlesAndDepthsTestingProcess,
CandlesAndDepthsParameterGrid,
// candles + orderbook
new EmulationInfo {UseMarketDepth = true, UseCandleTimeFrame = timeFrame, CurveColor = Colors.Cyan, StrategyName = LocalizedStrings.Str3020}),
Tuple.Create(
OrderLogCheckBox,
OrderLogTestingProcess,
OrderLogParameterGrid,
// order log
new EmulationInfo {UseOrderLog = true, CurveColor = Colors.CornflowerBlue, StrategyName = LocalizedStrings.Str3021})
};
// storage to historical data
var storageRegistry = new StorageRegistry
{
// set historical path
DefaultDrive = new LocalMarketDataDrive(HistoryPath.Text)
};
var startTime = (DateTime)From.Value;
var stopTime = (DateTime)To.Value;
// ОЛ необходимо загружать с 18.45 пред дня, чтобы стаканы строились правильно
if (OrderLogCheckBox.IsChecked == true)
startTime = startTime.Subtract(TimeSpan.FromDays(1)).AddHours(18).AddMinutes(45).AddTicks(1);
// ProgressBar refresh step
var progressStep = ((stopTime - startTime).Ticks / 100).To<TimeSpan>();
// set ProgressBar bounds
TicksTestingProcess.Maximum = TicksAndDepthsTestingProcess.Maximum = CandlesTestingProcess.Maximum = 100;
TicksTestingProcess.Value = TicksAndDepthsTestingProcess.Value = CandlesTestingProcess.Value = 0;
var logManager = new LogManager();
var fileLogListener = new FileLogListener("sample.log");
logManager.Listeners.Add(fileLogListener);
//logManager.Listeners.Add(new DebugLogListener()); // for track logs in output window in Vusial Studio (poor performance).
var generateDepths = GenDepthsCheckBox.IsChecked == true;
var maxDepth = MaxDepth.Text.To<int>();
var maxVolume = MaxVolume.Text.To<int>();
var secCode = secIdParts[0];
var board = ExchangeBoard.GetOrCreateBoard(secIdParts[1]);
foreach (var set in settings)
{
if (set.Item1.IsChecked == false)
continue;
var progressBar = set.Item2;
var statistic = set.Item3;
var emulationInfo = set.Item4;
// create test security
var security = new Security
{
Id = SecId.Text, // sec id has the same name as folder with historical data
Code = secCode,
Board = board,
};
var level1Info = new Level1ChangeMessage
{
SecurityId = security.ToSecurityId(),
ServerTime = startTime,
}
.TryAdd(Level1Fields.PriceStep, 10m)
.TryAdd(Level1Fields.StepPrice, 6m)
.TryAdd(Level1Fields.MinPrice, 10m)
.TryAdd(Level1Fields.MaxPrice, 1000000m)
.TryAdd(Level1Fields.MarginBuy, 10000m)
.TryAdd(Level1Fields.MarginSell, 10000m);
// test portfolio
var portfolio = new Portfolio
{
Name = "test account",
BeginValue = 1000000,
};
// create backtesting connector
var connector = new HistoryEmulationConnector(
new[] { security },
new[] { portfolio })
{
StorageRegistry = storageRegistry,
MarketEmulator =
{
Settings =
{
// set time frame is backtesting on candles
UseCandlesTimeFrame = emulationInfo.UseCandleTimeFrame,
// match order if historical price touched our limit order price.
// It is terned off, and price should go through limit order price level
// (more "severe" test mode)
MatchOnTouch = false,
}
},
//UseExternalCandleSource = true,
CreateDepthFromOrdersLog = emulationInfo.UseOrderLog,
CreateTradesFromOrdersLog = emulationInfo.UseOrderLog,
// set history range
StartDate = startTime,
StopDate = stopTime,
// set market time freq as time frame
MarketTimeChangedInterval = timeFrame,
};
((ILogSource)connector).LogLevel = DebugLogCheckBox.IsChecked == true ? LogLevels.Debug : LogLevels.Info;
logManager.Sources.Add(connector);
var candleManager = new CandleManager(connector);
var series = new CandleSeries(typeof(TimeFrameCandle), security, timeFrame);
_shortMa = new SimpleMovingAverage { Length = 10 };
_shortElem = new ChartIndicatorElement
{
Color = Colors.Coral,
ShowAxisMarker = false,
FullTitle = _shortMa.ToString()
};
_bufferedChart.AddElement(_area, _shortElem);
_longMa = new SimpleMovingAverage { Length = 80 };
_longElem = new ChartIndicatorElement
{
ShowAxisMarker = false,
FullTitle = _longMa.ToString()
};
_bufferedChart.AddElement(_area, _longElem);
// create strategy based on 80 5-min и 10 5-min
var strategy = new SmaStrategy(_bufferedChart, _candlesElem, _tradesElem, _shortMa, _shortElem, _longMa, _longElem, series)
{
Volume = 1,
Portfolio = portfolio,
Security = security,
Connector = connector,
LogLevel = DebugLogCheckBox.IsChecked == true ? LogLevels.Debug : LogLevels.Info,
// by default interval is 1 min,
// it is excessively for time range with several months
UnrealizedPnLInterval = ((stopTime - startTime).Ticks / 1000).To<TimeSpan>()
};
logManager.Sources.Add(strategy);
connector.NewSecurities += securities =>
{
if (securities.All(s => s != security))
return;
// fill level1 values
connector.SendInMessage(level1Info);
if (emulationInfo.UseMarketDepth)
{
connector.RegisterMarketDepth(security);
if (
// if order book will be generated
generateDepths ||
// of backtesting will be on candles
emulationInfo.UseCandleTimeFrame != TimeSpan.Zero
)
{
// if no have order book historical data, but strategy is required,
// use generator based on last prices
connector.RegisterMarketDepth(new TrendMarketDepthGenerator(connector.GetSecurityId(security))
{
Interval = TimeSpan.FromSeconds(1), // order book freq refresh is 1 sec
MaxAsksDepth = maxDepth,
MaxBidsDepth = maxDepth,
UseTradeVolume = true,
MaxVolume = maxVolume,
MinSpreadStepCount = 2, // min spread generation is 2 pips
MaxSpreadStepCount = 5, // max spread generation size (prevent extremely size)
MaxPriceStepCount = 3 // pips size,
});
}
}
if (emulationInfo.UseOrderLog)
{
connector.RegisterOrderLog(security);
}
if (emulationInfo.UseTicks)
{
connector.RegisterTrades(security);
}
// start strategy before emulation started
strategy.Start();
candleManager.Start(series);
// start historical data loading when connection established successfully and all data subscribed
connector.Start();
};
// fill parameters panel
statistic.Parameters.Clear();
statistic.Parameters.AddRange(strategy.StatisticManager.Parameters);
var pnlCurve = Curve.CreateCurve("P&L " + emulationInfo.StrategyName, emulationInfo.CurveColor, EquityCurveChartStyles.Area);
var unrealizedPnLCurve = Curve.CreateCurve(LocalizedStrings.PnLUnreal + emulationInfo.StrategyName, Colors.Black);
var commissionCurve = Curve.CreateCurve(LocalizedStrings.Str159 + " " + emulationInfo.StrategyName, Colors.Red, EquityCurveChartStyles.DashedLine);
var posItems = PositionCurve.CreateCurve(emulationInfo.StrategyName, emulationInfo.CurveColor);
strategy.PnLChanged += () =>
{
var pnl = new EquityData
{
Time = strategy.CurrentTime,
Value = strategy.PnL - strategy.Commission ?? 0
};
var unrealizedPnL = new EquityData
{
Time = strategy.CurrentTime,
Value = strategy.PnLManager.UnrealizedPnL
};
var commission = new EquityData
{
Time = strategy.CurrentTime,
Value = strategy.Commission ?? 0
};
pnlCurve.Add(pnl);
unrealizedPnLCurve.Add(unrealizedPnL);
commissionCurve.Add(commission);
};
strategy.PositionChanged += () => posItems.Add(new EquityData { Time = strategy.CurrentTime, Value = strategy.Position });
var nextTime = startTime + progressStep;
// handle historical time for update ProgressBar
connector.MarketTimeChanged += d =>
{
if (connector.CurrentTime < nextTime && connector.CurrentTime < stopTime)
return;
var steps = (connector.CurrentTime - startTime).Ticks / progressStep.Ticks + 1;
nextTime = startTime + (steps * progressStep.Ticks).To<TimeSpan>();
this.GuiAsync(() => progressBar.Value = steps);
};
connector.StateChanged += () =>
{
if (connector.State == EmulationStates.Stopped)
{
candleManager.Stop(series);
strategy.Stop();
logManager.Dispose();
_connectors.Clear();
SetIsEnabled(false);
this.GuiAsync(() =>
{
if (connector.IsFinished)
{
progressBar.Value = progressBar.Maximum;
MessageBox.Show(this, LocalizedStrings.Str3024.Put(DateTime.Now - _startEmulationTime));
}
else
MessageBox.Show(this, LocalizedStrings.cancelled);
});
}
else if (connector.State == EmulationStates.Started)
{
SetIsEnabled(true);
}
};
if (ShowDepth.IsChecked == true)
{
MarketDepth.UpdateFormat(security);
connector.NewMessage += (message, dir) =>
{
var quoteMsg = message as QuoteChangeMessage;
if (quoteMsg != null)
MarketDepth.UpdateDepth(quoteMsg);
};
}
_connectors.Add(connector);
progressBar.Value = 0;
}
_startEmulationTime = DateTime.Now;
// start emulation
foreach (var connector in _connectors)
{
// raise NewSecurities and NewPortfolio for full fill strategy properties
connector.Connect();
// 1 cent commission for trade
connector.SendInMessage(new CommissionRuleMessage
{
Rule = new CommissionPerTradeRule { Value = 0.01m }
});
}
TabControl.Items.Cast<TabItem>().First(i => i.Visibility == Visibility.Visible).IsSelected = true;
}
private void CheckBoxClick(object sender, RoutedEventArgs e)
{
var isEnabled = TicksCheckBox.IsChecked == true ||
TicksAndDepthsCheckBox.IsChecked == true ||
CandlesCheckBox.IsChecked == true ||
CandlesAndDepthsCheckBox.IsChecked == true ||
OrderLogCheckBox.IsChecked == true;
StartBtn.IsEnabled = isEnabled;
TabControl.Visibility = isEnabled ? Visibility.Visible : Visibility.Collapsed;
}
private void StopBtnClick(object sender, RoutedEventArgs e)
{
foreach (var connector in _connectors)
{
connector.Disconnect();
}
}
private void InitChart()
{
_bufferedChart.ClearAreas();
Curve.Clear();
PositionCurve.Clear();
_area = new ChartArea();
_bufferedChart.AddArea(_area);
_candlesElem = new ChartCandleElement { ShowAxisMarker = false };
_bufferedChart.AddElement(_area, _candlesElem);
_tradesElem = new ChartTradeElement { FullTitle = "Сделки" };
_bufferedChart.AddElement(_area, _tradesElem);
}
private void SetIsEnabled(bool started)
{
this.GuiAsync(() =>
{
StopBtn.IsEnabled = started;
StartBtn.IsEnabled = !started;
TicksCheckBox.IsEnabled = TicksAndDepthsCheckBox.IsEnabled = CandlesCheckBox.IsEnabled
= CandlesAndDepthsCheckBox.IsEnabled = OrderLogCheckBox.IsEnabled = !started;
_bufferedChart.IsAutoRange = started;
});
}
}
} |
Many sole traders and partnerships can operate in an environment where there is less need to comply with the authorities that regulate the UK’s corporate structure. However, where there is significant market fluctuation, business partners can become sensitive to potential financial exposure and as a result, there is often a dynamic shift in corporate re-structure from sole trader/partnership into companies.
At Saracens we have experience in dealing with such transitions having successfully assisted all our clients in complying with the legal formalities involved in incorporating a company. Given our level of experience, we have a strong understanding of our client’s commercial goals and can advise on how to best structure your business venture to enhance any competitive edge in the market place and meet your business objectives.
Saracens has worked for a number of clients in nurturing their business start-ups, generating a myriad of commercial solutions based on individual needs. This ranges from ensuring your business is fully licensed, compliant with the UK’s product standards and that your business’ intellectual property portfolio is protected from improper exploitation.
In addition to the above, we are able to advise you on how to set up a limited liability partnership, create a joint venture and incorporate a company limited by guarantees for charitable purposes.
Request a call back to discuss matters. |
Business security options for all your wants and needs.
1. 24/7 Monitoring. This is just something we do. Your business needs to be watched, even when you’re not there. Leave the overnight shift to us with our 24/7 monitoring protection.
2. Intrusion detection and protection. Commercial burglaries tend to occur at night after business hours. With our secure detection, you and the authorities will be notified in the case of intrusion.
3. Fire detection. A fire in a business puts many things at risk: yourself, your employees and your merchandise. With monitored smoke detectors, you can have peace of mind. If a fire occurred, you, your employees and merchandise will be protected.
4. Video surveillance. The most effective way officials catch burglars is through video surveillance. J&J offers a range of state-of-the-art equipment to ensure that another set of eyes is always looking out for your business.
5. Opening and closing supervision. We know you can’t always be at your business, but it’s nice to know that you can always know when the alarm has been armed or disarmed.
6. Wireless monitoring. No need to worry about your land line being disconnected, making your security more vulnerable. With J&J’s wireless monitoring, we provide reliable, uninterrupted service, so you’ll never have to worry about it.
Whether you’re a CEO of many businesses or a small business owner, J&J Security has the security options you want and need to protect your second home. Our business is protecting your business the best way possible. Let us help you today. Call us at 877-532-SAFE (7233) or visit our website for more information.
Newer PostRecent house fires spur reminder for fire safety.
Older PostAdditional security measures means greater security. |
jsonp({"cep":"08762090","logradouro":"Rua Nova Zel\u00e2ndia","bairro":"Jardim Santos Dumont I","cidade":"Mogi das Cruzes","uf":"SP","estado":"S\u00e3o Paulo"});
|
using System.Reflection;
using System.Runtime.CompilerServices;
// Information about this assembly is defined by the following attributes.
// Change them to the values specific to your project.
[assembly: AssemblyTitle("7_2")]
[assembly: AssemblyDescription("")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("")]
[assembly: AssemblyProduct("")]
[assembly: AssemblyCopyright("arthur")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]
// The assembly version has the format "{Major}.{Minor}.{Build}.{Revision}".
// The form "{Major}.{Minor}.*" will automatically update the build and revision,
// and "{Major}.{Minor}.{Build}.*" will update just the revision.
[assembly: AssemblyVersion("1.0.*")]
// The following attributes are used to specify the signing key for the assembly,
// if desired. See the Mono documentation for more information about signing.
//[assembly: AssemblyDelaySign(false)]
//[assembly: AssemblyKeyFile("")]
|
#!/bin/sh
#
# Copyright (C) 2010, 2012 Internet Systems Consortium, Inc. ("ISC")
#
# Permission to use, copy, modify, and/or distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
# AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.
# $Id: zone-edit.sh.in,v 1.2 2010/12/21 23:47:08 tbox Exp $
dir=/tmp/zone-edit.$$
mkdir ${dir} || exit 1
trap "/bin/rm -rf ${dir}" 0
prefix=/usr/local/named
exec_prefix=${prefix}
bindir=${exec_prefix}/bin
sbindir=${exec_prefix}/sbin
dig=${bindir}/dig
checkzone=${sbindir}/named-checkzone
nsupdate=${bindir}/nsupdate
case $# in
0) echo "Usage: zone-edit <zone> [dig options] [ -- nsupdate options ]"; exit 0 ;;
esac
# What kind of echo are we using?
try=`echo -n ""`
if test "X$try" = "X-n "
then
echo_arg=""
bsc="\\c"
else
echo_arg="-n"
bsc=""
fi
zone="${1}"
shift
digopts=
while test $# -ne 0
do
case "${1}" in
--)
shift
break
;;
*)
digopts="$digopts $1"
shift
;;
esac
done
${dig} axfr "$zone" $digopts |
awk '$4 == "RRSIG" || $4 == "NSEC" || $4 == "NSEC3" || $4 == "NSEC3PARAM" { next; } { print; }' > ${dir}/old
if test -s ${dir}/old
then
${checkzone} -q -D "$zone" ${dir}/old > ${dir}/ooo
fi
if test -s ${dir}/ooo
then
cp ${dir}/ooo ${dir}/new
while :
do
if ${VISUAL:-${EDITOR:-/bin/ed}} ${dir}/new
then
if ${checkzone} -q -D "$zone" ${dir}/new > ${dir}/nnn
then
sort ${dir}/ooo > ${dir}/s1
sort ${dir}/nnn > ${dir}/s2
comm -23 ${dir}/s1 ${dir}/s2 |
sed 's/^/update delete /' > ${dir}/ccc
comm -13 ${dir}/s1 ${dir}/s2 |
sed 's/^/update add /' >> ${dir}/ccc
if test -s ${dir}/ccc
then
cat ${dir}/ccc | more
while :
do
echo ${echo_arg} "Update (u), Abort (a), Redo (r), Modify (m), Display (d) : $bsc"
read ans
case "$ans" in
u)
(
echo zone "$zone"
cat ${dir}/ccc
echo send
) | ${nsupdate} "$@"
break 2
;;
a)
break 2
;;
d)
cat ${dir}/ccc | more
;;
r)
cp ${dir}/ooo ${dir}/new
break
;;
m)
break
;;
esac
done
else
while :
do
echo ${echo_arg} "Abort (a), Redo (r), Modify (m) : $bsc"
read ans
case "$ans" in
a)
break 2
;;
r)
cp ${dir}/ooo ${dir}/new
break
;;
m)
break
;;
esac
done
fi
else
while :
do
echo ${echo_arg} "Abort (a), Redo (r), Modify (m) : $bsc"
read ans
case "$ans" in
a)
break 2
;;
r)
cp ${dir}/ooo ${dir}/new
break
;;
m)
break
;;
esac
done
fi
fi
done
fi
|
[System.Serializable]
public struct LevelData
{
[System.Serializable]
public struct Collectable
{
public float x;
public float y;
public float z;
public override string ToString ()
{
return string.Format ("[Collectable: x={0}, y={1}, z={2}]", x, y, z);
}
}
public string music;
public float width;
public float height;
public float length;
public float duration;
public Collectable[] collectables;
public override string ToString ()
{
switch (collectables.Length) {
case 0:
return string.Format ("[LevelData: music={0}, width={1}, height={2}, length={3}, duration={4}, collectables=]", music, width, height, length, duration);
case 1:
return string.Format ("[LevelData: music={0}, width={1}, height={2}, length={3}, duration={4}, collectables={5}]", music, width, height, length, duration, collectables [0]);
default:
return string.Format ("[LevelData: music={0}, width={1}, height={2}, length={3}, duration={4}, collectables={5}, ...]", music, width, height, length, duration, collectables [0]);
}
}
}
|
--
-- assignProcessType.sql: Assign processType, processSubtype and category to a tree.
--
-- Copyright (C) 2011
-- ASTRON (Netherlands Foundation for Research in Astronomy)
-- P.O.Box 2, 7990 AA Dwingeloo, The Netherlands, [email protected]
--
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2 of the License, or
-- (at your option) any later version.
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
--
-- $Id:$
--
--
-- assignProcessType (auth, treeID, processType, processSubtype, strategy)
--
-- Assign the given values to the tree, make sure that the combination is unique for defaultTemplates.
--
-- Authorisation: none
--
-- Tables: otdbtree write
-- otdbuser read
--
-- Types: none
--
CREATE OR REPLACE FUNCTION assignProcessType(INT4, INT4, VARCHAR(20), VARCHAR(50), VARCHAR(30))
RETURNS BOOLEAN AS $$
-- $Id: addComponentToVT_func.sql 19935 2012-01-25 09:06:14Z mol $
DECLARE
TTtemplate CONSTANT INT2 := 20;
vFunction CONSTANT INT2 := 1;
vTreeType OTDBtree.treetype%TYPE;
vName OTDBtree.name%TYPE;
vIsAuth BOOLEAN;
vDummy OTDBtree.treeID%TYPE;
vNodeID INTEGER;
vRecord RECORD;
aAuthToken ALIAS FOR $1;
aTreeID ALIAS FOR $2;
aProcessType ALIAS FOR $3;
aProcessSubtype ALIAS FOR $4;
aStrategy ALIAS FOR $5;
BEGIN
-- check authorisation(authToken, tree, func, parameter)
vIsAuth := FALSE;
SELECT isAuthorized(aAuthToken, aTreeID, vFunction, 0)
INTO vIsAuth;
IF NOT vIsAuth THEN
RAISE EXCEPTION 'Not authorized to assign the processType to tree %', aTreeID;
END IF;
-- get treetype
SELECT treetype, name
INTO vTreeType, vName
FROM OTDBtree
WHERE treeID = aTreeID;
IF NOT FOUND THEN
RAISE EXCEPTION 'Tree % does not exist', aTreeID;
END IF;
-- not applicable for PIC trees.
IF vTreeType != TTtemplate THEN
RAISE EXCEPTION 'Process(sub)Types can only be assigned to (default) templates.';
END IF;
-- check for double defaulttemplate entries
IF vName IS NOT NULL AND aProcessType != '' THEN
SELECT treeID
INTO vDummy
FROM OTDBtree
WHERE processType = aProcessType
AND processSubtype = aProcessSubtype
AND strategy = aStrategy
AND name IS NOT NULL;
IF FOUND AND vDummy != aTreeID THEN
RAISE EXCEPTION 'There is already a defaultTemplate with the values %, %, %',
aProcessType, aProcessSubtype, aStrategy;
END IF;
END IF;
-- check if combination is allowed
-- SELECT *
-- INTO vRecord
-- FROM processTypes
-- WHERE processType = aProcessType
-- AND processSubtype = aProcessSubtype
-- AND strategy = aStrategy;
-- IF NOT FOUND THEN
-- RAISE EXCEPTION 'The combination of %, %, % for processType, processSubtype and strategy is not allowed',
-- aProcessType, aProcessSubtype, aStrategy;
-- END IF;
-- finally update the metadata info
UPDATE OTDBtree
SET processType = aProcessType,
processSubtype = aProcessSubtype,
strategy = aStrategy
WHERE treeID = aTreeID;
RETURN TRUE;
END;
$$ LANGUAGE plpgsql;
--
-- INTERNAL FUNCTION
-- Copy the processTypes from one tree to another.
--
-- Authorisation: none
--
-- Tables: otdbtree write
--
-- Types: none
--
CREATE OR REPLACE FUNCTION copyProcessType(INT4, INT4)
RETURNS BOOLEAN AS $$
-- $Id: addComponentToVT_func.sql 19935 2012-01-25 09:06:14Z mol $
DECLARE
vProcessType OTDBtree.processType%TYPE;
vProcessSubtype OTDBtree.processSubtype%TYPE;
vStrategy OTDBtree.strategy%TYPE;
vResult BOOLEAN;
aOrgTreeID ALIAS FOR $1;
aDestTreeID ALIAS FOR $2;
BEGIN
-- get treetype
SELECT processType, processSubtype, strategy
INTO vProcessType, vProcessSubtype, vStrategy
FROM OTDBtree
WHERE treeID = aOrgTreeID;
IF NOT FOUND THEN
RAISE EXCEPTION 'Tree % does not exist', aTreeID;
END IF;
-- update the metadata info
UPDATE OTDBtree
SET processType = vProcessType,
processSubtype = vProcessSubtype,
strategy = vStrategy
WHERE treeID = aDestTreeID;
RETURN TRUE;
END;
$$ LANGUAGE plpgsql;
--
-- INTERNAL FUNCTION
--
-- exportProcessType(treeID, prefixLen)
--
-- Return the processType values as a linefeed separated key-value list
--
-- Authorisation: none
--
-- Tables: otdbtree read
--
-- Types: none
--
CREATE OR REPLACE FUNCTION exportProcessType(INT4, INT4)
RETURNS TEXT AS $$
-- $Id: addComponentToVT_func.sql 19935 2012-01-25 09:06:14Z mol $
DECLARE
vResult TEXT := '';
vPrefix TEXT;
vProcessType OTDBtree.processType%TYPE;
vProcessSubtype OTDBtree.processSubtype%TYPE;
vStrategy OTDBtree.strategy%TYPE;
aTreeID ALIAS FOR $1;
aPrefixLen ALIAS FOR $2;
BEGIN
-- get processInfo
SELECT processType, processSubtype, strategy
INTO vProcessType, vProcessSubtype, vStrategy
FROM OTDBtree
WHERE treeID = aTreeID;
IF NOT FOUND THEN
RAISE EXCEPTION 'Tree % does not exist', aTreeID;
END IF;
SELECT substr(name, aPrefixLen)
INTO vPrefix
FROM getVHitemList(aTreeID, '%.Observation');
vResult := vResult || vPrefix || '.processType=' || vProcessType || chr(10);
vResult := vResult || vPrefix || '.processSubtype=' || vProcessSubtype || chr(10);
vResult := vResult || vPrefix || '.strategy=' || vStrategy || chr(10);
RETURN vResult;
END;
$$ LANGUAGE plpgsql;
|
<?php
if ( ! isset( $content_width ) ) {
$content_width = 700;
}
if ( ! function_exists( ( 'ct_founder_theme_setup' ) ) ) {
function ct_founder_theme_setup() {
add_theme_support( 'post-thumbnails' );
add_theme_support( 'automatic-feed-links' );
add_theme_support( 'title-tag' );
add_theme_support( 'html5', array(
'search-form',
'comment-form',
'comment-list',
'gallery',
'caption'
) );
add_theme_support( 'infinite-scroll', array(
'container' => 'loop-container',
'footer' => 'overflow-container',
'render' => 'ct_founder_infinite_scroll_render'
) );
require_once( trailingslashit( get_template_directory() ) . 'theme-options.php' );
foreach ( glob( trailingslashit( get_template_directory() ) . 'inc/*' ) as $filename ) {
include $filename;
}
load_theme_textdomain( 'founder', get_template_directory() . '/languages' );
register_nav_menus( array(
'primary' => __( 'Primary', 'founder' )
) );
}
}
add_action( 'after_setup_theme', 'ct_founder_theme_setup', 10 );
function ct_founder_register_widget_areas() {
register_sidebar( array(
'name' => __( 'Primary Sidebar', 'founder' ),
'id' => 'primary',
'description' => __( 'Widgets in this area will be shown in the sidebar.', 'founder' ),
'before_widget' => '<section id="%1$s" class="widget %2$s">',
'after_widget' => '</section>',
'before_title' => '<h2 class="widget-title">',
'after_title' => '</h2>'
) );
}
add_action( 'widgets_init', 'ct_founder_register_widget_areas' );
if ( ! function_exists( ( 'ct_founder_customize_comments' ) ) ) {
function ct_founder_customize_comments( $comment, $args, $depth ) {
$GLOBALS['comment'] = $comment;
global $post;
?>
<li <?php comment_class(); ?> id="li-comment-<?php comment_ID(); ?>">
<article id="comment-<?php comment_ID(); ?>" class="comment">
<div class="comment-author">
<?php
echo get_avatar( get_comment_author_email(), 36, '', get_comment_author() );
?>
<span class="author-name"><?php comment_author_link(); ?></span>
</div>
<div class="comment-content">
<?php if ( $comment->comment_approved == '0' ) : ?>
<em><?php _e( 'Your comment is awaiting moderation.', 'founder' ) ?></em>
<br/>
<?php endif; ?>
<?php comment_text(); ?>
</div>
<div class="comment-footer">
<span class="comment-date"><?php comment_date(); ?></span>
<?php comment_reply_link( array_merge( $args, array(
'reply_text' => __( 'Reply', 'founder' ),
'depth' => $depth,
'max_depth' => $args['max_depth']
) ) ); ?>
<?php edit_comment_link( __( 'Edit', 'founder' ) ); ?>
</div>
</article>
<?php
}
}
if ( ! function_exists( 'ct_founder_update_fields' ) ) {
function ct_founder_update_fields( $fields ) {
$commenter = wp_get_current_commenter();
$req = get_option( 'require_name_email' );
$label = $req ? '*' : ' ' . __( '(optional)', 'founder' );
$aria_req = $req ? "aria-required='true'" : '';
$fields['author'] =
'<p class="comment-form-author">
<label for="author">' . __( "Name", "founder" ) . $label . '</label>
<input id="author" name="author" type="text" value="' . esc_attr( $commenter['comment_author'] ) .
'" size="30" ' . $aria_req . ' />
</p>';
$fields['email'] =
'<p class="comment-form-email">
<label for="email">' . __( "Email", "founder" ) . $label . '</label>
<input id="email" name="email" type="email" value="' . esc_attr( $commenter['comment_author_email'] ) .
'" size="30" ' . $aria_req . ' />
</p>';
$fields['url'] =
'<p class="comment-form-url">
<label for="url">' . __( "Website", "founder" ) . '</label>
<input id="url" name="url" type="url" value="' . esc_attr( $commenter['comment_author_url'] ) .
'" size="30" />
</p>';
return $fields;
}
}
add_filter( 'comment_form_default_fields', 'ct_founder_update_fields' );
if ( ! function_exists( 'ct_founder_update_comment_field' ) ) {
function ct_founder_update_comment_field( $comment_field ) {
$comment_field =
'<p class="comment-form-comment">
<label for="comment">' . __( "Comment", "founder" ) . '</label>
<textarea required id="comment" name="comment" cols="45" rows="8" aria-required="true"></textarea>
</p>';
return $comment_field;
}
}
add_filter( 'comment_form_field_comment', 'ct_founder_update_comment_field' );
if ( ! function_exists( 'ct_founder_remove_comments_notes_after' ) ) {
function ct_founder_remove_comments_notes_after( $defaults ) {
$defaults['comment_notes_after'] = '';
return $defaults;
}
}
add_action( 'comment_form_defaults', 'ct_founder_remove_comments_notes_after' );
if ( ! function_exists( 'ct_founder_excerpt' ) ) {
function ct_founder_excerpt() {
global $post;
$ismore = strpos( $post->post_content, '<!--more-->' );
$show_full_post = get_theme_mod( 'full_post' );
$read_more_text = get_theme_mod( 'read_more_text' );
if ( ( $show_full_post == 'yes' ) && ! is_search() ) {
if ( $ismore ) {
// Has to be written this way because i18n text CANNOT be stored in a variable
if ( ! empty( $read_more_text ) ) {
the_content( wp_kses_post( $read_more_text ) . " <span class='screen-reader-text'>" . get_the_title() . "</span>" );
} else {
the_content( __( 'Continue reading', 'founder' ) . " <span class='screen-reader-text'>" . get_the_title() . "</span>" );
}
} else {
the_content();
}
} elseif ( $ismore ) {
if ( ! empty( $read_more_text ) ) {
the_content( wp_kses_post( $read_more_text ) . " <span class='screen-reader-text'>" . get_the_title() . "</span>" );
} else {
the_content( __( 'Continue reading', 'founder' ) . " <span class='screen-reader-text'>" . get_the_title() . "</span>" );
}
} else {
the_excerpt();
}
}
}
if ( ! function_exists( 'ct_founder_excerpt_read_more_link' ) ) {
function ct_founder_excerpt_read_more_link( $output ) {
global $post;
$read_more_text = get_theme_mod( 'read_more_text' );
if ( ! empty( $read_more_text ) ) {
return $output . "<p><a class='more-link' href='" . esc_url( get_permalink() ) . "'>" . wp_kses_post( $read_more_text ) . " <span class='screen-reader-text'>" . get_the_title() . "</span></a></p>";
} else {
return $output . "<p><a class='more-link' href='" . esc_url( get_permalink() ) . "'>" . __( 'Continue reading', 'founder' ) . " <span class='screen-reader-text'>" . get_the_title() . "</span></a></p>";
}
}
}
add_filter( 'the_excerpt', 'ct_founder_excerpt_read_more_link' );
if ( ! function_exists( 'ct_founder_custom_excerpt_length' ) ) {
function ct_founder_custom_excerpt_length( $length ) {
$new_excerpt_length = get_theme_mod( 'excerpt_length' );
if ( ! empty( $new_excerpt_length ) && $new_excerpt_length != 25 ) {
return $new_excerpt_length;
} elseif ( $new_excerpt_length === 0 ) {
return 0;
} else {
return 25;
}
}
}
add_filter( 'excerpt_length', 'ct_founder_custom_excerpt_length', 99 );
if ( ! function_exists( 'ct_founder_new_excerpt_more' ) ) {
function ct_founder_new_excerpt_more( $more ) {
$new_excerpt_length = get_theme_mod( 'excerpt_length' );
$excerpt_more = ( $new_excerpt_length === 0 ) ? '' : '…';
return $excerpt_more;
}
}
add_filter( 'excerpt_more', 'ct_founder_new_excerpt_more' );
if ( ! function_exists( 'ct_founder_remove_more_link_scroll' ) ) {
function ct_founder_remove_more_link_scroll( $link ) {
$link = preg_replace( '|#more-[0-9]+|', '', $link );
return $link;
}
}
add_filter( 'the_content_more_link', 'ct_founder_remove_more_link_scroll' );
if ( ! function_exists( 'ct_founder_featured_image' ) ) {
function ct_founder_featured_image() {
global $post;
$featured_image = '';
if ( has_post_thumbnail( $post->ID ) ) {
if ( is_singular() ) {
$featured_image = '<div class="featured-image">' . get_the_post_thumbnail( $post->ID, 'full' ) . '</div>';
} else {
$featured_image = '<div class="featured-image"><a href="' . esc_url( get_permalink() ) . '">' . get_the_title() . get_the_post_thumbnail( $post->ID, 'full' ) . '</a></div>';
}
}
$featured_image = apply_filters( 'ct_founder_featured_image', $featured_image );
if ( $featured_image ) {
echo $featured_image;
}
}
}
if ( ! function_exists( 'ct_founder_social_array' ) ) {
function ct_founder_social_array() {
$social_sites = array(
'twitter' => 'founder_twitter_profile',
'facebook' => 'founder_facebook_profile',
'google-plus' => 'founder_googleplus_profile',
'pinterest' => 'founder_pinterest_profile',
'linkedin' => 'founder_linkedin_profile',
'youtube' => 'founder_youtube_profile',
'vimeo' => 'founder_vimeo_profile',
'tumblr' => 'founder_tumblr_profile',
'instagram' => 'founder_instagram_profile',
'flickr' => 'founder_flickr_profile',
'dribbble' => 'founder_dribbble_profile',
'rss' => 'founder_rss_profile',
'reddit' => 'founder_reddit_profile',
'soundcloud' => 'founder_soundcloud_profile',
'spotify' => 'founder_spotify_profile',
'vine' => 'founder_vine_profile',
'yahoo' => 'founder_yahoo_profile',
'behance' => 'founder_behance_profile',
'codepen' => 'founder_codepen_profile',
'delicious' => 'founder_delicious_profile',
'stumbleupon' => 'founder_stumbleupon_profile',
'deviantart' => 'founder_deviantart_profile',
'digg' => 'founder_digg_profile',
'github' => 'founder_github_profile',
'hacker-news' => 'founder_hacker-news_profile',
'steam' => 'founder_steam_profile',
'vk' => 'founder_vk_profile',
'weibo' => 'founder_weibo_profile',
'tencent-weibo' => 'founder_tencent_weibo_profile',
'500px' => 'founder_500px_profile',
'foursquare' => 'founder_foursquare_profile',
'slack' => 'founder_slack_profile',
'slideshare' => 'founder_slideshare_profile',
'qq' => 'founder_qq_profile',
'whatsapp' => 'founder_whatsapp_profile',
'skype' => 'founder_skype_profile',
'wechat' => 'founder_wechat_profile',
'xing' => 'founder_xing_profile',
'paypal' => 'founder_paypal_profile',
'email' => 'founder_email_profile',
'email-form' => 'founder_email_form_profile'
);
return apply_filters( 'ct_founder_filter_social_sites', $social_sites );
}
}
if ( ! function_exists( 'ct_founder_social_icons_output' ) ) {
function ct_founder_social_icons_output() {
$social_sites = ct_founder_social_array();
$square_icons = array(
'linkedin',
'twitter',
'vimeo',
'youtube',
'pinterest',
'rss',
'reddit',
'tumblr',
'steam',
'xing',
'github',
'google-plus',
'behance',
'facebook'
);
// store the site name and url
foreach ( $social_sites as $social_site => $profile ) {
if ( strlen( get_theme_mod( $social_site ) ) > 0 ) {
$active_sites[ $social_site ] = $social_site;
}
}
if ( ! empty( $active_sites ) ) {
echo "<ul class='social-media-icons'>";
foreach ( $active_sites as $key => $active_site ) {
// get the square or plain class
if ( in_array( $active_site, $square_icons ) ) {
$class = 'fa fa-' . $active_site . '-square';
} else {
$class = 'fa fa-' . $active_site;
}
if ( $active_site == 'email-form' ) {
$class = 'fa fa-envelope-o';
}
if ( $active_site == 'email' ) { ?>
<li>
<a class="email" target="_blank"
href="mailto:<?php echo antispambot( is_email( get_theme_mod( $key ) ) ); ?>">
<i class="fa fa-envelope" title="<?php esc_attr_e( 'email', 'founder' ); ?>"></i>
<span class="screen-reader-text"><?php esc_attr_e( 'email', 'founder' ); ?></span>
</a>
</li>
<?php } elseif ( $active_site == 'skype' ) { ?>
<li>
<a class="<?php echo esc_attr( $active_site ); ?>" target="_blank"
href="<?php echo esc_url( get_theme_mod( $key ), array( 'http', 'https', 'skype' ) ); ?>">
<i class="<?php echo esc_attr( $class ); ?>" title="<?php echo esc_attr( $active_site ); ?>"></i>
<span class="screen-reader-text"><?php echo esc_attr( $active_site ); ?></span>
</a>
</li>
<?php } else { ?>
<li>
<a class="<?php echo esc_attr( $active_site ); ?>" target="_blank"
href="<?php echo esc_url( get_theme_mod( $key ) ); ?>">
<i class="<?php echo esc_attr( $class ); ?>" title="<?php echo esc_attr( $active_site ); ?>"></i>
<span class="screen-reader-text"><?php echo esc_attr( $active_site ); ?></span>
</a>
</li>
<?php
}
}
echo "</ul>";
}
}
}
/*
* WP will apply the ".menu-primary-items" class & id to the containing <div> instead of <ul>
* making styling difficult and confusing. Using this wrapper to add a unique class to make styling easier.
*/
function ct_founder_wp_page_menu() {
wp_page_menu( array(
"menu_class" => "menu-unset",
"depth" => - 1
)
);
}
if ( ! function_exists( '_wp_render_title_tag' ) ) :
function ct_founder_add_title_tag() {
?>
<title><?php wp_title( ' | ' ); ?></title>
<?php
}
add_action( 'wp_head', 'ct_founder_add_title_tag' );
endif;
function ct_founder_nav_dropdown_buttons( $item_output, $item, $depth, $args ) {
if ( $args->theme_location == 'primary' ) {
if ( in_array( 'menu-item-has-children', $item->classes ) || in_array( 'page_item_has_children', $item->classes ) ) {
$item_output = str_replace( $args->link_after . '</a>', $args->link_after . '</a><button class="toggle-dropdown" aria-expanded="false" name="toggle-dropdown"><span class="screen-reader-text">' . __( "open menu", "founder" ) . '</span></button>', $item_output );
}
}
return $item_output;
}
add_filter( 'walker_nav_menu_start_el', 'ct_founder_nav_dropdown_buttons', 10, 4 );
function ct_founder_sticky_post_marker() {
// sticky_post_status only included in content-archive, so it will only show on the blog
if ( is_sticky() && ! is_archive() ) {
echo '<div class="sticky-status"><span>' . __( "Featured Post", "founder" ) . '</span></div>';
}
}
add_action( 'sticky_post_status', 'ct_founder_sticky_post_marker' );
function ct_founder_reset_customizer_options() {
if ( empty( $_POST['founder_reset_customizer'] ) || 'founder_reset_customizer_settings' !== $_POST['founder_reset_customizer'] ) {
return;
}
if ( ! wp_verify_nonce( $_POST['founder_reset_customizer_nonce'], 'founder_reset_customizer_nonce' ) ) {
return;
}
if ( ! current_user_can( 'edit_theme_options' ) ) {
return;
}
$mods_array = array(
'logo_upload',
'search_bar',
'full_post',
'excerpt_length',
'read_more_text',
'comments_display',
'custom_css'
);
$social_sites = ct_founder_social_array();
// add social site settings to mods array
foreach ( $social_sites as $social_site => $value ) {
$mods_array[] = $social_site;
}
$mods_array = apply_filters( 'ct_founder_mods_to_remove', $mods_array );
foreach ( $mods_array as $theme_mod ) {
remove_theme_mod( $theme_mod );
}
$redirect = admin_url( 'themes.php?page=founder-options' );
$redirect = add_query_arg( 'founder_status', 'deleted', $redirect );
// safely redirect
wp_safe_redirect( $redirect );
exit;
}
add_action( 'admin_init', 'ct_founder_reset_customizer_options' );
function ct_founder_delete_settings_notice() {
if ( isset( $_GET['founder_status'] ) ) {
?>
<div class="updated">
<p><?php _e( 'Customizer settings deleted', 'founder' ); ?>.</p>
</div>
<?php
}
}
add_action( 'admin_notices', 'ct_founder_delete_settings_notice' );
function ct_founder_body_class( $classes ) {
global $post;
$full_post = get_theme_mod( 'full_post' );
if ( $full_post == 'yes' ) {
$classes[] = 'full-post';
}
// add all historic singular classes
if ( is_singular() ) {
$classes[] = 'singular';
if ( is_singular( 'page' ) ) {
$classes[] = 'singular-page';
$classes[] = 'singular-page-' . $post->ID;
} elseif ( is_singular( 'post' ) ) {
$classes[] = 'singular-post';
$classes[] = 'singular-post-' . $post->ID;
} elseif ( is_singular( 'attachment' ) ) {
$classes[] = 'singular-attachment';
$classes[] = 'singular-attachment-' . $post->ID;
}
}
return $classes;
}
add_filter( 'body_class', 'ct_founder_body_class' );
function ct_founder_post_class( $classes ) {
$classes[] = 'entry';
return $classes;
}
add_filter( 'post_class', 'ct_founder_post_class' );
function ct_founder_custom_css_output() {
$custom_css = get_theme_mod( 'custom_css' );
if ( $custom_css ) {
$custom_css = ct_founder_sanitize_css( $custom_css );
wp_add_inline_style( 'ct-founder-style', $custom_css );
wp_add_inline_style( 'ct-founder-style-rtl', $custom_css );
}
}
add_action( 'wp_enqueue_scripts', 'ct_founder_custom_css_output', 20 );
function ct_founder_add_meta_elements() {
$meta_elements = '';
$meta_elements .= sprintf( '<meta charset="%s" />' . "\n", get_bloginfo( 'charset' ) );
$meta_elements .= '<meta name="viewport" content="width=device-width, initial-scale=1" />' . "\n";
$theme = wp_get_theme( get_template() );
$template = sprintf( '<meta name="template" content="%s %s" />' . "\n", esc_attr( $theme->get( 'Name' ) ), esc_attr( $theme->get( 'Version' ) ) );
$meta_elements .= $template;
echo $meta_elements;
}
add_action( 'wp_head', 'ct_founder_add_meta_elements', 1 );
// Move the WordPress generator to a better priority.
remove_action( 'wp_head', 'wp_generator' );
add_action( 'wp_head', 'wp_generator', 1 );
function ct_founder_infinite_scroll_render() {
while ( have_posts() ) {
the_post();
get_template_part( 'content', 'archive' );
}
}
if ( ! function_exists( 'ct_founder_get_content_template' ) ) {
function ct_founder_get_content_template() {
/* Blog */
if ( is_home() ) {
get_template_part( 'content', 'archive' );
} /* Post */
elseif ( is_singular( 'post' ) ) {
get_template_part( 'content' );
} /* Page */
elseif ( is_page() ) {
get_template_part( 'content', 'page' );
} /* Attachment */
elseif ( is_attachment() ) {
get_template_part( 'content', 'attachment' );
} /* Archive */
elseif ( is_archive() ) {
get_template_part( 'content', 'archive' );
} /* Custom Post Type */
else {
get_template_part( 'content' );
}
}
}
// allow skype URIs to be used
function ct_founder_allow_skype_protocol( $protocols ){
$protocols[] = 'skype';
return $protocols;
}
add_filter( 'kses_allowed_protocols' , 'ct_founder_allow_skype_protocol' ); |
Hospital Impact is now FierceHospitals and we want to know: What will it take to make your organization the best-run organization on the planet?
Once again hospital CEOs ranked finances as their top concerns, according to the latest ACHE survey.
Technological advances and a push for better accessibility are changing the hospital’s role as the center of gravity for patient care.
Highmark Health's Allegheny Health Network will invest $1 billion to build new facilities and to renovate existing hospitals.
NYC Health + Hospitals announced it will sue the state over $380 million in disproportionate share hospital payments. |
Before undertaking the rear suspension rebuild and assembly, we wanted to get the differential rebuilt and in place. This is critical because the suspension’s Roto-flex couplings and half shafts mount to this differential.
Based on a common English Ford unit, the front half of the differential is nothing fancy. What makes this differential special is not the ring and pinion gears and bearings, but the bespoke Lotus cast rear housing and differential mounting bushings used on the Elan.
The early Elan was offered with a 3.9:1 final drive. In an effort to improve the car at highway speeds, the later cars were offered with 3.7:1 final drive gears. Since we had a late parts car and had already updated our engine to the later car’s slightly higher horsepower figure, we felt safe in using the later and lower (numerically) final drive, which would make our car run lower rpm at higher speed.
Of course, in a rather long list of things that would have been good to know before we started on this project, the flange that connects to the driveshaft on the later differential has a different, wider bolt pattern than that of the early differentials.
Thankfully, we were able to get the driveshaft back out of our still bare chassis, and make the correction. We just had to use the flange off of a later driveshaft we had in our parts stash.
As for the rebuild, the Ford gears are robust and were in good shape, so we cleaned, painted, added new lubricant, and installed new bearings and gaskets into the differential housing.
Did you install the stiffening bracket that spans the upper mounting ears on the aluminum casting? Lotus added these to later Elans. If not, it may be worth considering. I'm following this restoration with great interest as I am restoring a 1972 Elan that has been sitting since 1987.
I did not add those stiffening bracket. We are trying to restore this as close to original as possible. I did stiffen the engine mounts, as they were torn.
You may want to talk to Ray @ R.D. That differential bracket was a running change Lotus made, I think with the Sprint. It is a pain, even with the body off.
I have been talking to Ray at least once a week, about every step in the restoration. He has been a great resource and a great guy. |
Has anyone ever used this digital barometer?
I just discovered it and bought one. It's a little over $100 and offers a surprising resolution of 0.004 inHg. There are some problems however. It runs on a 9V battery and turns out to be sensitive to battery voltage. It is also very sensitive to temperature. The last thing: it does not come with absolute calibration -- the user must determine an appropriate offset for their unit.
So far, this doesn't sound too good. But, on the plus side, it comes with a temperature sensor that can be used to "fix" the temperature problem in software. I've hooked this barometer up to a well-regulated 9 volt power source instead of the battery and with temperature correction it appears to be surprisingly accurate. The readings are lining up quite well with the MADIS analysis provided through CWOP -- right now a 3-day analysis is showing an average error of 0.01 inHg and a standard deviation of 0.006 inHg. Not bad for such a cheap little unit!
An interesting device. A challenge maybe but I don't need the baro.
I recommend using a Mercury 9 volt battery as a voltage reference in a linear regulated power supply. An op-amp uses the 9v battery only as a reference but does not drain the battery. The battery lasts almost its shelf life. An alternate may be to use a precision IC voltage source instead of a zener reference in the power supply.
I'm using a 12VDC wall wart from CUI Inc. as the main power source. It's only about $7 from DigiKey and uses very little power from the 120V lines. The 9V regulation is provided by an LM431 shunt regulator which has a TC of 50ppm/degC. Everything is such low power that there is not much waste in using a shunt regulator -- it only needs 5mA or so to run. This is coupled with a 9V battery for backup when the power goes out -- there might be a slight bump in pressure readings in this case but the unit should run for a very long time on the battery backup.
I'll post some design files for ExpressPCB and a DigiKey parts list on the WSDL web site at some point. I believe I can fit six copies of the power supply on one of their "MiniBoard" templates. For something like $51 you get 3 MiniBoards which equates to 18 power supplies. |
require 'test_helper'
class EmailAddressTest < ActiveSupport::TestCase
test 'should use correct default address' do
Tenant.current_domain = Tenant.first.domain
assert_equal '[email protected]', EmailAddress.default_email
EmailAddress.delete_all
assert_equal '[email protected]', EmailAddress.default_email
end
end
|
# Dataset feed updated element
**Purpose**: The dataset feed must provide information about the date, time and timezone at which the feed was last updated in the [updated element](#updatedelement).
**Prerequisites**
**Test method**
* check if the [updated element](#updatedelement) provides a [valid date](#validdate).
* the date must not be in the future or before the year 2012
**Reference(s)**:
* [TG DL](http://inspire.ec.europa.eu/id/ats/download-service/3.1/atom-pre-defined/README#ref_TG_DL), Requirement 24
**Test type**: Automated
**Notes**
Not really practical to check if it is actually the correct date of last updating especially as ATOM spec allows this to be for "significant" updates.
## Contextual XPath references
The namespace prefixes used as described in [README.md](http://inspire.ec.europa.eu/id/ats/download-service/3.1/atom-pre-defined/README#namespaces).
Abbreviation | XPath expression
---------------------------------------------------------- | -------------------------------------------------------------------------
updated element <a name="updatedelement"></a> | /atom:feed/atom:updated
valid date <a name="validdate"></a> | year-from-dateTime(xs:dateTime(/atom:feed/atom:updated))
|
/*
* jStorybook: すべての小説家・作者のためのオープンソース・ソフトウェア
* Copyright (C) 2008 - 2012 Martin Mustun
* (このソースの製作者) KMY
*
* このプログラムはフリーソフトです。
* あなたは、自由に修正し、再配布することが出来ます。
* あなたの権利は、the Free Software Foundationによって発表されたGPL ver.2以降によって保護されています。
*
* このプログラムは、小説・ストーリーの制作がよりよくなるようにという願いを込めて再配布されています。
* あなたがこのプログラムを再配布するときは、GPLライセンスに同意しなければいけません。
* <http://www.gnu.org/licenses/>.
*/
package jstorybook.viewtool.messenger.pane.chart;
import java.util.ArrayList;
import java.util.Calendar;
import java.util.List;
import javafx.beans.property.StringProperty;
import jstorybook.viewtool.messenger.Message;
/**
* シーン一括編集で、シーンの箱を作るメッセージ
*
* @author KMY
*/
public class SceneNovelBoxCreateMessage extends Message {
private final StringProperty sceneName;
private final StringProperty sceneText;
private final Calendar startTime;
private final Calendar endTime;
private final List<PersonDrawMessage> personDrawMessageList = new ArrayList<>();
private final List<PlaceDrawMessage> placeDrawMessageList = new ArrayList<>();
private final List<KeywordDrawMessage> keywordDrawMessageList = new ArrayList<>();
public SceneNovelBoxCreateMessage (StringProperty sceneName, StringProperty sceneText, Calendar startTime, Calendar endTime) {
this.sceneName = sceneName;
this.sceneText = sceneText;
this.startTime = startTime;
this.endTime = endTime;
}
public List<PersonDrawMessage> getPersonList () {
return this.personDrawMessageList;
}
public List<PlaceDrawMessage> getPlaceList () {
return this.placeDrawMessageList;
}
public List<KeywordDrawMessage> getKeywordList () {
return this.keywordDrawMessageList;
}
public Calendar getStartTime () {
return this.startTime;
}
public Calendar getEndTime () {
return this.endTime;
}
public StringProperty sceneNameProperty () {
return this.sceneName;
}
public StringProperty sceneTextProperty () {
return this.sceneText;
}
}
|
/*
* (C) 2007-2010 Alibaba Group Holding Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* manager for route table pull from configserver impl
*
* Version: $Id$
*
* Authors:
* ruohai <[email protected]>
* - initial release
*
*/
#include <algorithm>
#include "table_manager.hpp"
#include "log.hpp"
#include "scoped_wrlock.hpp"
namespace {
const int MISECONDS_ASSURANCE_TIME = 30;
}
namespace tair {
using namespace std;
table_manager::table_manager()
{
server_table = NULL;
table_version = 0u;
copy_count = 0u;
bucket_count = 0u;
pthread_rwlock_init(&m_mutex, 0);
}
table_manager::~table_manager()
{
if (server_table != NULL) {
delete [] server_table;
server_table = NULL;
}
pthread_rwlock_destroy(&m_mutex);
}
bool table_manager::is_master(int bucket_number, int server_flag)
{
tair::common::CScopedRwLock __scoped_lock(&m_mutex,false);
assert (server_table != NULL);
int index = bucket_number;
if (server_flag == TAIR_SERVERFLAG_PROXY || server_flag == TAIR_SERVERFLAG_RSYNC_PROXY)
index += get_hash_table_size();
return server_table[index] == local_server_ip::ip;
}
void table_manager::do_update_table(uint64_t *new_table, size_t size, uint32_t table_version, uint32_t copy_count, uint32_t bucket_count)
{
this->copy_count = copy_count;
this->bucket_count = bucket_count;
assert((size % get_hash_table_size()) == 0);
#ifdef TAIR_DEBUG
log_debug("list a new table size = %d ", size);
for (size_t i = 0; i < size; ++i) {
log_debug("serverTable[%d] = %s", i, tbsys::CNetUtil::addrToString(new_table[i]).c_str() );
}
#endif
uint64_t *temp_table = new uint64_t[size];
memcpy(temp_table, new_table, size * sizeof(uint64_t));
tair::common::CScopedRwLock __scoped_lock(&m_mutex,true);
uint64_t *old_table = server_table;
server_table = temp_table;
if (old_table != NULL) {
usleep(MISECONDS_ASSURANCE_TIME);
delete [] old_table;
}
// clear the containers
padding_buckets.clear();
release_buckets.clear();
migrates.clear();
available_server_ids.clear();
vector<int> temp_holding_buckets;
for (size_t i=0; i<get_hash_table_size(); i++) {
available_server_ids.insert(new_table[i]);
if (new_table[i] == local_server_ip::ip) {
log_debug("take bucket: %d", (i%this->bucket_count));
temp_holding_buckets.push_back(i % this->bucket_count);
if (i < this->bucket_count && size > get_hash_table_size()) {
calculate_migrates(new_table, i);
}
}
}
#ifdef TAIR_DEBUG
log_debug("caculate migrate ok size = %d", migrates.size());
bucket_server_map_it it = migrates.begin();
for (; it != migrates.end() ; ++it) {
for(vector<uint64_t>::iterator it2 = it->second.begin(); it2 != it->second.end(); it2++) {
log_debug("bucket id:%d will migrate to server id %s ", it->first,tbsys::CNetUtil::addrToString(*it2).c_str());
}
}
#endif
if (size > get_hash_table_size()) {
// have migrate table
for (size_t i=get_hash_table_size(); i<2*get_hash_table_size(); i++) {
available_server_ids.insert(new_table[i]);
if (new_table[i] == local_server_ip::ip)
padding_buckets.push_back(i % this->bucket_count);
}
}
calculate_release_bucket(temp_holding_buckets);
holding_buckets = temp_holding_buckets;
this->table_version = table_version;
#ifdef TAIR_DEBUG
for (size_t i=0; i<holding_buckets.size(); i++) {
log_debug("holding bucket: %d", holding_buckets[i]);
}
#endif
}
vector<uint64_t> table_manager::get_slaves(int bucket_number, bool is_migrating)
{
tair::common::CScopedRwLock __scoped_lock(&m_mutex,false);
assert (server_table != NULL);
vector<uint64_t> slaves;
int end = get_hash_table_size();
int index = bucket_number + this->bucket_count;
if (is_migrating) {
index += get_hash_table_size();
end += get_hash_table_size();
}
// make sure I am the master
if (server_table[index - this->bucket_count] != local_server_ip::ip) {
log_info("I am not master, have no slave.");
return slaves;
}
do {
uint64_t sid = server_table[index];
if (sid != 0) {
log_debug("add slave: %s", tbsys::CNetUtil::addrToString(sid).c_str());
slaves.push_back(sid);
}
index += this->bucket_count;
} while (index < end);
return slaves;
}
uint64_t table_manager::get_migrate_target(int bucket_number)
{
tair::common::CScopedRwLock __scoped_lock(&m_mutex,false);
assert (server_table != NULL);
return server_table[bucket_number + get_hash_table_size()];
}
void table_manager::calculate_release_bucket(vector<int> &new_holding_bucket)
{
// sort the vectors
sort(new_holding_bucket.begin(), new_holding_bucket.end());
sort(holding_buckets.begin(), holding_buckets.end());
set_difference(holding_buckets.begin(), holding_buckets.end(),
new_holding_bucket.begin(), new_holding_bucket.end(),
inserter(release_buckets, release_buckets.end()));
}
void table_manager::calculate_migrates(uint64_t *table, int index)
{
uint64_t* psource_table = table;
uint64_t* pdest_table = table + get_hash_table_size();
for (size_t i = 0; i < this->copy_count; ++i) {
bool need_migrate = true;
uint64_t dest_dataserver = pdest_table[index + this->bucket_count * i];
for (size_t j =0; j < this->copy_count; ++j)
{
if (dest_dataserver == psource_table[index + this->bucket_count * j]) {
need_migrate = false;
break;
}
}
if (need_migrate) {
log_debug("add migrate item: bucket[%d] => %s", index, tbsys::CNetUtil::addrToString(dest_dataserver).c_str());
migrates[index].push_back(dest_dataserver);
}
}
bucket_server_map_it it = migrates.find(index);
if (it == migrates.end())
{
if (psource_table[index] != pdest_table[index])
{
//this will add a empty vector to migrates,
//some times only need to change master for a bucket
migrates[index];
}
}
}
void table_manager::init_migrate_done_set(boost::dynamic_bitset<> &migrate_done_set, const vector<uint64_t> ¤t_state_table)
{
tair::common::CScopedRwLock __scoped_lock(&m_mutex,false);
int bucket_number = 0;
for (size_t i=0; i< current_state_table.size(); i+= this->copy_count) {
bucket_number = (int)current_state_table[i++]; // skip the bucket_number
bool has_migrated = false;
for (size_t j=0; j < this->copy_count; ++j) {
if (current_state_table[i+j] != server_table[bucket_number + j * this->bucket_count]) {
has_migrated = true;
break;
}
}
if (has_migrated) {
migrate_done_set.set(bucket_number, true);
log_debug("bucket[%d] has migrated");
}
}
}
/**
const uint64_t* table_manager::get_server_table() const
{
assert (server_table != NULL);
return server_table;
}
**/
vector<int> table_manager::get_holding_buckets() const
{
return holding_buckets;
}
vector<int> table_manager::get_padding_buckets() const
{
return padding_buckets;
}
vector<int> table_manager::get_release_buckets() const
{
return release_buckets;
}
bucket_server_map table_manager::get_migrates() const
{
return migrates;
}
set<uint64_t> table_manager::get_available_server_ids() const
{
return available_server_ids;
}
void table_manager::clear_available_server()
{
available_server_ids.clear();
}
void table_manager::set_table_for_localmode()
{
copy_count = 1u;
bucket_count = 1u;
}
uint32_t table_manager::get_version() const
{
return table_version;
}
uint32_t table_manager::get_copy_count() const
{
return copy_count;
}
uint32_t table_manager::get_bucket_count() const
{
return bucket_count;
}
uint32_t table_manager::get_hash_table_size() const
{
return bucket_count * copy_count;
}
}
|
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
package org.apache.skywalking.apm.plugin.spring.mvc.v4.define;
import org.apache.skywalking.apm.agent.core.plugin.interceptor.enhance.ClassInstanceMethodsEnhancePluginDefine;
public abstract class AbstractSpring4Instrumentation extends ClassInstanceMethodsEnhancePluginDefine {
public static final String WITHNESS_CLASSES = "org.springframework.web.servlet.tags.ArgumentTag";
@Override
protected final String[] witnessClasses() {
return new String[] {WITHNESS_CLASSES};
}
}
|
Romantic hotels in Cape Town, South Africa. Beach hotels in Cape Town.
The Villa is placed in a quiet residential quarter with a lovely ‘village’ feel within a short stroll of the centre of Cape Town and a large number of its best restaurants. Dating back to the late 1800’s the new building has been refurbished and decorated in a sophisticated contemporary style which has been dubbed “African Zen”.
Tintswalo Atlantic, a 5-star luxury lodge nestled on the shore of the Atlantic Ocean between Hout Bay and Cape Town, mirrors the majesty of the Atlantic Ocean in every uniquely designed suite and finish. Located on Chapman’s Peak Drive, which forms part of the Table Mountain National Park – one of South Africa’s eight World Heritage Sites.
Old and new meet in perfect harmony at The Three Boutique Hotel, with the conversion of this beautiful National Monument building into a stylish and affordable 15-bedroom boutique hotel in the heart of Cape Town. The Three is modern and sophisticated Cape Town hotel accommodation with an historic heart in a trendy part of Cape Town.
Alta Bay, previously a 5-star boutique hotel has recently (Oct 2011) been converted into a 4-star guest house with 3 large luxury units. Surrounded by a lush native garden, Alta Bay combines understated luxury and urban chic with a laid-back and retreat atmosphere. This Tuscan house is built on separate levels with a great sense of space and light throughout.
Experience contemporary chic and historic graciousness at the Cape Heritage Hotel. Situated in Cape Town’s fashionable Heritage Square, this intimate boutique hotel offers direct access to the city’s vibrant street life, business precinct, shopping and fine dining. The hotel’s historic roots run deep into the 18th century.
Casually chic, The Glen, Cape Town blends the best elements of personalised hospitality. Fitted to international standards, this beautifully styled hotel has been awarded a four star hotel rating by the SA Tourism Grading Council.
Now The Last Word has found new space beyond boutique. Our Intimate Hotels take relaxation to new heights. They offer a remarkable air of warm, cosy personal care. No crowds. No queues. Just peace… and time… and space.
Camps Bay Retreat 5 Star Boutique Hotel is a sanctuary for the soul, set on four acres of lush green nature reserve. With a mountain meditation pool, thickets of trees, waterfalls and streams, it is a peaceful paradise, where meditative moments are waiting to be had. Views stretch across the ever-changing Atlantic Ocean and along the peaks of the Twelve Apostles Mountain Range, from the Deck House and The Villa.
Compass House is a stunning boutique hotel in the heart of Bantry Bay, Cape Town. We would love to welcome you to Compass House, where you can enjoy all Cape Town has to offer… or just relax by our pool.Get out of bed in your own time and start the day with a continental breakfast on the terrace.
Set in the vibrant heart of Cape Town, this luxury hotel and spa offers easy access to all that’s happening in this dynamic city.Enjoying a superb location at the foot of Table Mountain, and just a short stroll from downtown, Belmond Mount Nelson Hotel offers the perfect combination of leafy tranquility and contemporary buzz. |
// --------------------------------------------------------------------------------------------------------------------
// <copyright file="IRenderHost.cs" company="Helix Toolkit">
// Copyright (c) 2014 Helix Toolkit contributors
// </copyright>
// <summary>
// This technique is used for the entire render pass
// by all Element3D if not specified otherwise in
// the elements itself
// </summary>
// --------------------------------------------------------------------------------------------------------------------
namespace HelixToolkit.Wpf.SharpDX
{
using System;
using global::SharpDX;
using global::SharpDX.Direct3D11;
using HelixToolkit.Wpf.SharpDX.Utilities;
public interface IRenderHost
{
/// <summary>
/// Fired whenever an exception occurred on this object.
/// </summary>
event EventHandler<RelayExceptionEventArgs> ExceptionOccurred;
Device Device { get; }
Color4 ClearColor { get; }
bool IsShadowMapEnabled { get; }
//bool IsDeferredEnabled { get; }
bool IsMSAAEnabled { get; }
IRenderer Renderable { get; set; }
/// <summary>
/// Invalidates the current render and requests an update.
/// </summary>
void InvalidateRender();
void SetDefaultRenderTargets();
void SetDefaultColorTargets(DepthStencilView dsv);
IEffectsManager EffectsManager { get; set; }
IRenderTechniquesManager RenderTechniquesManager { get; set; }
/// <summary>
/// This technique is used for the entire render pass
/// by all Element3D if not specified otherwise in
/// the elements itself
/// </summary>
RenderTechnique RenderTechnique { get; }
double ActualHeight { get; }
double ActualWidth { get; }
}
}
|
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8">
<title>18 --> 19</title>
<link href="./../../assets/style.css" rel="stylesheet">
</head>
<body>
<h2>You have to be fast</h2>
<a href="./4bc1921a41a157561691997555f5f7f4972f73797cb0d5e997023d58f8589a14.html">Teleport</a>
<hr>
<a href="./../../about.md">About</a> (Spoilers! )
<script src="./../../assets/md5.js"></script>
<script>
window.currentLevel = 7;
</script>
<script src="./../../assets/script.js"></script>
</body>
</html> |
Managing software projects is difficult under the best circumstances. Organizations can improve chances of success by applying known industry smart practices for software project management.
The system development life cycle (SDLC) is a common methodology for systems development in many organizations. This methodology features distinctive phases, each of which records the progress of the systems analysis and design project. The potential for abuse, inefficiencies, and the potential to deliver application systems, which do not meet the needs of the end-user, warrants the involvement of IT and user management as well as the audit function in most all software development efforts.
This course will examine the basic elements of the SDLC process, and how the process of designing new systems has (and continues to) evolve. Attendees will also discuss strategic system design methodologies, and how the auditor can be an effective change agent within this process.
The course focuses on providing assurance that the practices for the acquisition, development, testing and implementation of information systems meet the organizations strategies and objectives.
Interpret the requirements for PDLC application development from a base of confidence and understanding.
Confidently advise management on specific controls necessary for successful application development.
Find managing application development projects easier.
Discuss with both end users and management, how successful systems are developed and maintained.
Lay the foundation for successful application development projects, which includes planning the project, estimating the work, and tracking progress.
Discuss the Capability Maturity Model (CMM) as a model of management practices for improving the quality of software.
Recognize that one of the goals of the PDLC approach is total quality assurance through process-related improvements throughout an entire organization. |
/*
* Copyright 2010-2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License").
* You may not use this file except in compliance with the License.
* A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
#pragma once
#include <aws/mediaconvert/MediaConvert_EXPORTS.h>
#include <aws/core/utils/memory/stl/AWSString.h>
namespace Aws
{
namespace MediaConvert
{
namespace Model
{
enum class CmafWriteDASHManifest
{
NOT_SET,
DISABLED,
ENABLED
};
namespace CmafWriteDASHManifestMapper
{
AWS_MEDIACONVERT_API CmafWriteDASHManifest GetCmafWriteDASHManifestForName(const Aws::String& name);
AWS_MEDIACONVERT_API Aws::String GetNameForCmafWriteDASHManifest(CmafWriteDASHManifest value);
} // namespace CmafWriteDASHManifestMapper
} // namespace Model
} // namespace MediaConvert
} // namespace Aws
|
My sweet girl, Emily, turned 8 today.
It seems like yesterday that she was placed in my arms...after a delivery that was exciting to say the least.
Our girl is a one-of-a-kind, sweet, smart, awesome, kind, independent, inventive, creative, caring kid. We got one of the best kids in the world....well...THREE of the best kids in the world.
Happy Birthday to you, Emily.
We love you with all of our hearts and are so glad that you are our daughter. |
Film scanners are scanners which are specialized in digitizing film material (positive or negative). While a flat bed scanner illuminates the applied image from below with a light source (reflective originals) a film scanner illuminates an image like a slide projector.
Film scanners have very high scan resolutions because a large image should be generated out of a tiny positive or negative. Most film scanners offered here are designed for 35mm and APS films. However, there are also devices for medium format films and large format films.
We only offer high-quality film scanners for people who emphasise high image quality. Absolute low-cost scanners mostly have strong shortcomings with image quality wherefore we do not offer them. After all we want you to achieve satisfying output with your new film scanner.
You can find detailed information and reviews on all film scanners and everything concerning scanning on our film scanner website.
The company Braun Photo Technik is situated in Eutingen/Germany and established a good reputation during the last 50 years in the field of slide projectors. Since 2003 Braun also offers their own film scanners.
Canon phased out their only film scanner and only offers flat bed scanners with integrated transparency unit now.
Epson operates in the field of flat bed scanners since many years and offers high quality flat bed scanners in all price categories.
Hasselblad stands for high end photography products. The Flextight scanners are professional film scanners based on the virtual drum technology. Hasselblad film scanners are suited for professional, top-quality digitising of medium and large formats.
Microtek offers flatbed scanners with or without transparency unit.
Nikon only offers high-end film scanners. The lowest priced model is even more expensive than the top-of-the-line models of many other manufacturers. All Nikon film scanners can be highly recommended, because they all produce an extremely high image quality.
The company Plustek from Norderstedt offers film scanners in the lower to middle price range.
The German company Reflecta located in the city of Rottenburg covers a wide field of application with their film scanners. No other manufacturer offers such a wide product range as Reflecta. All high-class film scanners by Reflecta have in common that they show their excellence only in combination with the scan software Silverfast; that's why we offer these devices in a cheap bundle with Silverfast. |
The Interior Department says it is replacing an Obama-era regulation aimed at restricting harmful methane emissions from oil and gas production on federal lands. A rule being published in the Federal Register this week will replace the 2016 rule with requirements similar to those that were in force before the Obama administration changed the regulation.
WASHINGTON – The Interior Department is replacing an Obama-era regulation aimed at restricting harmful methane emissions from oil and gas production on federal lands.
A rule being published in the Federal Register this week will replace the 2016 rule with requirements similar to those in force before the Obama administration changed the regulation.
Interior had previously announced it was delaying the Obama-era rule until January 2019, arguing that it was overly burdensome to industry. Officials said then that the delay would give the federal Bureau of Land Management time to review the earlier rule while avoiding tens of millions of dollars in compliance costs to industry.
The new rule announced Monday marks at least the fourth time the Trump administration has moved to delay, set aside or replace the Obama-era rule, which was finalized in late 2016.
The new rule comes after a federal judge rejected a bid by the Trump administration to roll back the rule last fall. The Republican-controlled Senate upheld the Obama rule last May in a vote that surprised and angered many conservatives and delighted environmentalists.
U.S. Magistrate Judge Elizabeth Laporte of the U.S. District Court for the Northern District of California said in October that Interior had failed to give a “reasoned explanation” for changing the Obama-era rule and had not offered details on why an earlier analysis by the Obama administration was faulty.
Laporte’s order reinstated the 2016 rule, but BLM later delayed the rule until 2019.
The rule announced Monday is intended to be a permanent replacement for the Obama rule. The public has 60 days to comment, with a final rule expected later this year.
House Natural Resources Committee Chairman Rob Bishop hailed the latest proposal on how to handle methane emissions on federal lands.
“The previous administration scorned domestic energy development and crafted the prior rule to deliberately stifle” energy production, said Bishop, R-Utah.
The new rule will “promote investment in federal and tribal lands so that economies in the West can grow,” he said.
Fred Krupp, president of the Environmental Defense Fund, said the Obama-era rule required oil and gas companies to “take common-sense and cost-effective measures to reduce preventable leaks and venting of methane” at drilling sites.
The new proposal by Interior Secretary Ryan Zinke “would only serve to reward the least responsible actors in industry at a time when other companies are moving forward to tackle methane waste,” Krupp said, citing a voluntary program by large energy companies to reduce methane emissions at drilling sites nationwide.
A program backed by the American Petroleum Institute, the top lobbying group for the oil and gas industry, is intended to encourage drillers to find and fix leaks and take other steps to reduce the escape of natural gas into the atmosphere during drilling operations. |
--
-- Copyright 2005-2014 The Kuali Foundation
--
-- Licensed under the Educational Community License, Version 2.0 (the "License");
-- you may not use this file except in compliance with the License.
-- You may obtain a copy of the License at
--
-- http://www.opensource.org/licenses/ecl2.php
--
-- Unless required by applicable law or agreed to in writing, software
-- distributed under the License is distributed on an "AS IS" BASIS,
-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-- See the License for the specific language governing permissions and
-- limitations under the License.
--
-- insert Recall permission for initiators
INSERT INTO KRIM_PERM_T (PERM_ID, OBJ_ID, VER_NBR, PERM_TMPL_ID, NMSPC_CD, NM) values ((select PERM_ID from (select (max(cast(PERM_ID as decimal)) + 1) as PERM_ID from KRIM_PERM_T where PERM_ID is not NULL and PERM_ID REGEXP '^[1-9][0-9]*$' and cast(PERM_ID as decimal) < 10000) as tmptable), uuid(), 1, (select PERM_TMPL_ID from KRIM_PERM_TMPL_T where NMSPC_CD = 'KR-WKFLW' and NM = 'Recall Document'), 'KR-WKFLW', 'Recall Document')
;
-- define document type wildcard for permission
INSERT INTO KRIM_PERM_ATTR_DATA_T (ATTR_DATA_ID, OBJ_ID, VER_NBR, PERM_ID, KIM_TYP_ID, KIM_ATTR_DEFN_ID, ATTR_VAL) values ((select ATTR_DATA_ID from (select (max(cast(ATTR_DATA_ID as decimal)) + 1) as ATTR_DATA_ID from KRIM_PERM_ATTR_DATA_T where ATTR_DATA_ID is not NULL and ATTR_DATA_ID REGEXP '^[1-9][0-9]*$' and cast(ATTR_DATA_ID as decimal) < 10000) as tmptable), uuid(), 1, (select PERM_ID from KRIM_PERM_T where NMSPC_CD = 'KR-WKFLW' and NM='Recall Document'), (select KIM_TYP_ID from KRIM_PERM_TMPL_T where NMSPC_CD = 'KR-WKFLW' and NM = 'Recall Document'), (select KIM_ATTR_DEFN_ID from KRIM_ATTR_DEFN_T where NMSPC_CD = 'KR-WKFLW' and NM = 'documentTypeName'), '*')
;
-- associate Recall permission with initiator derived role
INSERT INTO KRIM_ROLE_PERM_T (ROLE_PERM_ID, OBJ_ID, VER_NBR, ROLE_ID, PERM_ID, ACTV_IND) values ((select ROLE_PERM_ID from (select (max(cast(ROLE_PERM_ID as decimal)) + 1) as ROLE_PERM_ID from KRIM_ROLE_PERM_T where ROLE_PERM_ID is not NULL and ROLE_PERM_ID REGEXP '^[1-9][0-9]*$' and cast(ROLE_PERM_ID as decimal) < 10000) as tmptable), uuid(), 1, (select ROLE_ID from KRIM_ROLE_T where ROLE_NM = 'Initiator' and NMSPC_CD = 'KR-WKFLW'), (select PERM_ID from KRIM_PERM_T where NMSPC_CD = 'KR-WKFLW' and NM='Recall Document'), 'Y')
;
|
// Copyright 2019 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#ifndef CHROME_BROWSER_UI_ANDROID_AUTOFILL_CARD_EXPIRATION_DATE_FIX_FLOW_VIEW_ANDROID_H_
#define CHROME_BROWSER_UI_ANDROID_AUTOFILL_CARD_EXPIRATION_DATE_FIX_FLOW_VIEW_ANDROID_H_
#include <jni.h>
#include "base/android/jni_string.h"
#include "base/android/scoped_java_ref.h"
#include "base/macros.h"
#include "components/autofill/core/browser/ui/payments/card_expiration_date_fix_flow_view.h"
namespace content {
class WebContents;
}
namespace autofill {
class CardExpirationDateFixFlowController;
class CardExpirationDateFixFlowViewAndroid
: public CardExpirationDateFixFlowView {
public:
CardExpirationDateFixFlowViewAndroid(
CardExpirationDateFixFlowController* controller,
content::WebContents* web_contents);
CardExpirationDateFixFlowViewAndroid(
const CardExpirationDateFixFlowViewAndroid&) = delete;
CardExpirationDateFixFlowViewAndroid& operator=(
const CardExpirationDateFixFlowViewAndroid&) = delete;
void OnUserAccept(JNIEnv* env,
const base::android::JavaParamRef<jobject>& obj,
const base::android::JavaParamRef<jstring>& month,
const base::android::JavaParamRef<jstring>& year);
void OnUserDismiss(JNIEnv* env,
const base::android::JavaParamRef<jobject>& obj);
void PromptDismissed(JNIEnv* env,
const base::android::JavaParamRef<jobject>& obj);
// CardExpirationDateFixFlowView implementation.
void Show() override;
void ControllerGone() override;
private:
~CardExpirationDateFixFlowViewAndroid() override;
// The corresponding java object.
base::android::ScopedJavaGlobalRef<jobject> java_object_;
CardExpirationDateFixFlowController* controller_;
content::WebContents* web_contents_;
};
} // namespace autofill
#endif // CHROME_BROWSER_UI_ANDROID_AUTOFILL_CARD_EXPIRATION_DATE_FIX_FLOW_VIEW_ANDROID_H_
|
/*
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
package org.apache.flex.compiler.internal.tree.as;
import static com.google.common.base.Predicates.and;
import static com.google.common.collect.Collections2.filter;
import java.io.IOException;
import java.io.Reader;
import java.io.StringReader;
import java.util.ArrayList;
import java.util.Collection;
import java.util.Collections;
import java.util.EnumSet;
import java.util.List;
import java.util.concurrent.locks.ReentrantLock;
import org.apache.flex.compiler.common.ASImportTarget;
import org.apache.flex.compiler.common.IImportTarget;
import org.apache.flex.compiler.constants.IASLanguageConstants;
import org.apache.flex.compiler.constants.INamespaceConstants;
import org.apache.flex.compiler.definitions.IDefinition;
import org.apache.flex.compiler.definitions.IFunctionDefinition.FunctionClassification;
import org.apache.flex.compiler.definitions.IParameterDefinition;
import org.apache.flex.compiler.definitions.references.IReference;
import org.apache.flex.compiler.definitions.references.ReferenceFactory;
import org.apache.flex.compiler.internal.definitions.FunctionDefinition;
import org.apache.flex.compiler.internal.definitions.NamespaceDefinition;
import org.apache.flex.compiler.internal.definitions.ParameterDefinition;
import org.apache.flex.compiler.internal.definitions.VariableDefinition;
import org.apache.flex.compiler.internal.parsing.as.ASParser;
import org.apache.flex.compiler.internal.parsing.as.ASToken;
import org.apache.flex.compiler.internal.parsing.as.ASTokenTypes;
import org.apache.flex.compiler.internal.parsing.as.ConfigProcessor;
import org.apache.flex.compiler.internal.scopes.ASFileScope;
import org.apache.flex.compiler.internal.scopes.ASScope;
import org.apache.flex.compiler.internal.scopes.ClosureScope;
import org.apache.flex.compiler.internal.scopes.FunctionScope;
import org.apache.flex.compiler.internal.semantics.PostProcessStep;
import org.apache.flex.compiler.internal.tree.as.parts.FunctionContentsPart;
import org.apache.flex.compiler.internal.tree.as.parts.IFunctionContentsPart;
import org.apache.flex.compiler.parsing.IASToken;
import org.apache.flex.compiler.problems.CanNotInsertSemicolonProblem;
import org.apache.flex.compiler.problems.ICompilerProblem;
import org.apache.flex.compiler.problems.InternalCompilerProblem2;
import org.apache.flex.compiler.scopes.IASScope;
import org.apache.flex.compiler.tree.ASTNodeID;
import org.apache.flex.compiler.tree.as.IASNode;
import org.apache.flex.compiler.tree.as.ICommonClassNode;
import org.apache.flex.compiler.tree.as.IContainerNode;
import org.apache.flex.compiler.tree.as.IDefinitionNode;
import org.apache.flex.compiler.tree.as.IExpressionNode;
import org.apache.flex.compiler.tree.as.IFunctionNode;
import org.apache.flex.compiler.tree.as.INamespaceDecorationNode;
import org.apache.flex.compiler.tree.as.IParameterNode;
import org.apache.flex.compiler.tree.as.IScopedNode;
import org.apache.flex.compiler.tree.as.ITypeNode;
import org.apache.flex.compiler.tree.as.IVariableNode;
import org.apache.flex.compiler.workspaces.IWorkspace;
import com.google.common.base.Predicate;
/**
* ActionScript parse tree node representing a function definition
*/
public class FunctionNode extends BaseTypedDefinitionNode implements IFunctionNode
{
/**
* Constructor.
* <p>
* Creates a {@code FunctionNode} from the "new" keyword token and the
* function name node.
*
* @param functionKeyword function keyword
* @param nameNode node containing the name of this function
*/
public FunctionNode(IASToken functionKeyword, IdentifierNode nameNode)
{
init(nameNode);
if (functionKeyword != null)
contentsPart.setKeywordNode(new KeywordNode(functionKeyword));
}
/**
* Constructor.
* <p>
* Creates a new FunctionNode with a custom part for this functions
* contents.
*
* @param node the name of the node
* @param part the {@link IFunctionContentsPart}
*/
public FunctionNode(IdentifierNode node, IFunctionContentsPart part)
{
super.init(node);
contentsPart = part;
}
/**
* Contents of the function, including args, etc
*/
protected IFunctionContentsPart contentsPart;
/**
* Does this method need a Definition added for "arguments". This will be
* set to true during scope building if we encounter an IdentifierNode that
* refers to "arguments".
*/
boolean needsArguments = false;
/**
* The configuration processor used to re-parse the function body.
*/
private ConfigProcessor configProcessor = null;
/**
* The open curly token of the function body.
*/
private ASToken openT = null;
/**
* True if the function body is a deferred node.
*/
private boolean isBodyDeferred = false;
/**
* Lock used when parsing the function body
*/
private ReentrantLock deferredBodyParsingLock = new ReentrantLock();
/**
* A count of the number of calls to parse the function body. The body
* won't actually be thrown away until the count reaches zero again.
*/
private int deferredBodyParsingReferenceCount = 0;
/**
* Cached function body text. If it's empty, the function body has to be
* reloaded from the file using a seek-able reader, which might be slow for
* large file.
*/
private String functionBodyText;
/**
* Save the problems until later if we were parsed from somewhere we don't have a problems collection
*/
private Collection<ICompilerProblem> parseProblems;
//
// NodeBase overrides
//
@Override
public ASTNodeID getNodeID()
{
return ASTNodeID.FunctionID;
}
@Override
public int getSpanningStart()
{
return getNodeStartForTooling();
}
@Override
protected void setChildren(boolean fillInOffsets)
{
addDecorationChildren(fillInOffsets);
addChildInOrder(contentsPart.getFunctionKeywordNode(), fillInOffsets);
addChildInOrder(nameNode, fillInOffsets);
addChildInOrder(contentsPart.getParametersNode(), fillInOffsets);
addChildInOrder(typeNode, fillInOffsets);
addChildInOrder(contentsPart.getContents(), fillInOffsets);
}
@Override
public void normalize(boolean fillInOffsets)
{
super.normalize(fillInOffsets);
contentsPart.optimize();
}
@Override
protected void analyze(EnumSet<PostProcessStep> set, ASScope scope, Collection<ICompilerProblem> problems)
{
if (set.contains(PostProcessStep.POPULATE_SCOPE))
{
final IFunctionNode parentFunctionNode = (IFunctionNode)getAncestorOfType(IFunctionNode.class);
if (parentFunctionNode != null)
parentFunctionNode.rememberLocalFunction(this);
FunctionDefinition definition = buildDefinition();
setDefinition(definition);
// if the parent is an anonymous function, then don't add the function definition to the scope
// we have already added the anonymous function to the scope and this function definition does not
// belong to the scope
if (this.getParent() instanceof FunctionObjectNode)
{
String funcName = definition.getBaseName();
if (funcName.length() == 0)
scope.setAsContainingScopeOfAnonymousFunction(definition);
else
{
// If the parent is an "anonymous" function with a name, then
// the name will have to be visibly within the function body, so it can
// call itself recursively. So make a special closure scope
// Add a closure scope below the containing scope
ASScope closureScope = new ClosureScope(scope);
scope = closureScope; // now build the function scope below this..
scope.addDefinition(definition); // This sets the containing scope of the def
}
}
else
scope.addDefinition(definition); // This sets the containing scope of the def
ScopedBlockNode contents = contentsPart.getContents();
if (contents != null)
{
ASScope localScope = new FunctionScope(scope, contents);
definition.setContainedScope(localScope);
scope = localScope;
}
}
if (set.contains(PostProcessStep.RECONNECT_DEFINITIONS))
{
reconnectDef(scope);
final FunctionDefinition functionDef = this.getDefinition();
if (functionDef != null)
{
scope = functionDef.getContainedScope();
ScopedBlockNode contents = contentsPart.getContents();
// scope can be null for generated binding wrappers of
// getters and setters
if (contents != null && scope != null)
{
contents.reconnectScope(scope);
}
}
}
// Recurse on the function parameters.
ContainerNode parameters = contentsPart.getParametersNode();
if (parameters != null)
{
parameters.analyze(set, scope, problems);
if (set.contains(PostProcessStep.POPULATE_SCOPE))
{
// Set the parameters.
IParameterNode[] argumentNodes = getParameterNodes();
int n = argumentNodes.length;
ParameterDefinition[] arguments = new ParameterDefinition[n];
for (int i = 0; i < n; i++)
{
if (argumentNodes[i] instanceof ParameterNode)
arguments[i] = (ParameterDefinition)((ParameterNode)argumentNodes[i]).getDefinition();
}
((FunctionDefinition)this.definition).setParameters(arguments);
}
}
// Recurse on the function block.
BlockNode contents = contentsPart.getContents();
if (contents != null)
contents.analyze(set, scope, problems);
if (set.contains(PostProcessStep.POPULATE_SCOPE))
tryAddDefaultArgument();
}
/*
* For debugging only.
* Builds a string such as <code>"doSomething(int, String):void"</code>
* from the signature of the function being defined.
*/
@Override
protected boolean buildInnerString(StringBuilder sb)
{
sb.append(getName());
sb.append('(');
IVariableNode[] args = getParameterNodes();
for (int i = 0; i < args.length; i++)
{
IVariableNode arg = args[i];
sb.append(arg.getVariableType());
if (i < args.length - 1)
sb.append(", ");
}
sb.append(')');
if (getReturnType().length() > 0)
sb.append(":" + getReturnType());
return true;
}
//
// TreeNode overrides
//
@Override
protected int getInitialChildCount()
{
return 4;
}
//
// BaseDefinitionNode overrides overrides
//
@Override
protected void init(ExpressionNodeBase idNode)
{
super.init(idNode);
contentsPart = createContentsPart();
}
@Override
public INamespaceDecorationNode getNamespaceNode()
{
INamespaceDecorationNode namespaceNode = super.getNamespaceNode();
if (isConstructor())
{
if (namespaceNode != null && namespaceNode.getName().equals(INamespaceConstants.public_))
return namespaceNode;
NamespaceIdentifierNode pub = new NamespaceIdentifierNode(INamespaceConstants.public_);
pub.span(-1, -1, -1, -1);
pub.setDecorationTarget(this);
return pub;
}
return namespaceNode;
}
@Override
public String getNamespace()
{
INamespaceDecorationNode ns = getNamespaceNode();
if (ns != null)
{
String nameString = ns.getName();
// If public, just return it.
if (nameString.equals(INamespaceConstants.public_))
return nameString;
// Otherwise, check to see if we are a constructor.
if (isConstructor())
return INamespaceConstants.public_;
// Just return the value.
return nameString;
}
// If we are null, make sure to check if we are a constructor.
if (isConstructor())
return INamespaceConstants.public_;
return null;
}
@Override
public boolean hasNamespace(String namespace)
{
if (isConstructor())
return namespace.compareTo(INamespaceConstants.public_) == 0;
return super.hasNamespace(namespace);
}
@Override
public FunctionDefinition getDefinition()
{
return (FunctionDefinition)super.getDefinition();
}
@Override
protected void setDefinition(IDefinition def)
{
assert def instanceof FunctionDefinition;
super.setDefinition(def);
}
//
// IFunctionNode implementations
//
@Override
public boolean isImplicit()
{
if (getParent() != null)
{
if (getParent().getParent() instanceof ClassNode)
{
ClassNode containingClass = (ClassNode)getParent().getParent();
if (containingClass.getDefaultConstructorNode() == this)
return true;
}
else if (getParent().getParent() instanceof InterfaceNode)
{
InterfaceNode containingInterface = (InterfaceNode)getParent().getParent();
if (containingInterface.getCastFunctionNode() == this)
return true;
}
}
return false;
}
@Override
public String getQualifiedName()
{
String qualifiedName = null;
if (isPackageLevelFunction())
{
IImportTarget importTarget = ASImportTarget.buildImportFromPackageName(getWorkspace(), getPackageName());
qualifiedName = importTarget.getQualifiedName(getName());
}
if (qualifiedName == null)
qualifiedName = getName();
return qualifiedName;
}
@Override
public String getShortName()
{
return getName();
}
@Override
public final ScopedBlockNode getScopedNode()
{
return contentsPart.getContents();
}
@Override
public FunctionClassification getFunctionClassification()
{
IScopedNode scopedNode = getScopeNode();
IASNode node = scopedNode;
if (node instanceof ICommonClassNode || node.getParent() instanceof ICommonClassNode)
return FunctionClassification.CLASS_MEMBER;
if (node.getParent() instanceof InterfaceNode)
return FunctionClassification.INTERFACE_MEMBER;
if (node.getParent() instanceof PackageNode)
return FunctionClassification.PACKAGE_MEMBER;
if (node instanceof FileNode)// this is an include
return FunctionClassification.FILE_MEMBER;
return FunctionClassification.LOCAL;
}
@Override
public boolean isGetter()
{
return this instanceof GetterNode;
}
@Override
public boolean isSetter()
{
return this instanceof SetterNode;
}
@Override
public boolean isConstructor()
{
String name = getName();
String returnType = getReturnType();
// Allow constructors that have a (bogus) return type
if (!returnType.equals("") &&
!returnType.equals(name) &&
!isAnyType() &&
!isVoidType())
{
return false;
}
if (getParent() != null &&
getParent().getParent() != null &&
(getParent().getParent() instanceof ClassNode ||
getParent().getParent() instanceof InterfaceNode))
{
if (name.equals(((IDefinitionNode) getParent().getParent()).getShortName()))
return true;
}
return false;
}
@Override
public boolean isCastFunction()
{
String name = getName();
String returnType = getReturnType();
if (!returnType.equals("") && !returnType.equals(name))
return false;
if (getParent() != null &&
getParent().getParent() != null &&
getParent().getParent() instanceof ITypeNode)
{
if (name.equals(((ITypeNode)getParent().getParent()).getShortName()))
return true;
}
return false;
}
@Override
public ContainerNode getParametersContainerNode()
{
return contentsPart.getParametersNode();
}
@Override
public IParameterNode[] getParameterNodes()
{
IParameterNode[] variables = {};
ContainerNode arguments = contentsPart.getParametersNode();
if (arguments != null)
{
int argumentscount = arguments.getChildCount();
variables = new IParameterNode[argumentscount];
for (int i = 0; i < argumentscount; i++)
{
IASNode argument = arguments.getChild(i);
if (argument instanceof IParameterNode)
variables[i] = (IParameterNode)argument;
}
}
return variables;
}
@Override
public IExpressionNode getReturnTypeNode()
{
return getTypeNode();
}
@Override
public String getReturnType()
{
return getTypeName();
}
@Override
public boolean hasBody()
{
ScopedBlockNode sbn = getScopedNode();
return sbn.getChildCount() > 0 ||
sbn.getContainerType() != IContainerNode.ContainerType.SYNTHESIZED;
}
//
// Other methods
//
protected IFunctionContentsPart createContentsPart()
{
return new FunctionContentsPart();
}
private void tryAddDefaultArgument()
{
FunctionDefinition def = getDefinition();
ASScope funcScope = def.getContainedScope();
if (needsArguments && funcScope.getLocalDefinitionSetByName(IASLanguageConstants.arguments) == null)
{
// Add the arguments Array to the function scope
// only do this if there is not already a local property, or parameter that is named arguments
// and something in the function body references arguments - this should avoid creating the
// definition when it's not needed.
VariableDefinition argumentsDef = new VariableDefinition(IASLanguageConstants.arguments);
argumentsDef.setNamespaceReference(NamespaceDefinition.getDefaultNamespaceDefinition(funcScope));
argumentsDef.setTypeReference(ReferenceFactory.builtinReference(IASLanguageConstants.BuiltinType.ARRAY));
argumentsDef.setImplicit();
funcScope.addDefinition(argumentsDef);
}
}
private void setConstructorIfNeeded(FunctionDefinition funcDef)
{
if (isConstructor())
{
IASNode parentParent = getParent().getParent();
if( parentParent instanceof ClassNode)
{
ClassNode classNode = (ClassNode)parentParent;
if (classNode.getConstructorNode() == null)
{
if (nameNode instanceof IdentifierNode)
{
((IdentifierNode)nameNode).setReferenceValue(classNode.getDefinition());
classNode.constructorNode = this;
}
}
}
funcDef.setNamespaceReference(NamespaceDefinition.getCodeModelImplicitDefinitionNamespace());
}
}
FunctionDefinition buildDefinition()
{
String definitionName = getName();
// System.out.println("buildDefinition: " + definitionName);
FunctionDefinition definition = createFunctionDefinition(definitionName);
definition.setNode(this);
fillInNamespaceAndModifiers(definition);
fillInMetadata(definition);
// Set the return type. If a type annotation doesn't appear in the source,
// the return type in the definition will be "".
IReference returnType = typeNode != null ? typeNode.computeTypeReference() : null;
definition.setReturnTypeReference(returnType);
definition.setTypeReference(ReferenceFactory.builtinReference(IASLanguageConstants.BuiltinType.FUNCTION));
setConstructorIfNeeded(definition);
return definition;
}
/**
* Method to create the correct Definition class - needed so we can create
* different Definition types for getters, setters, and plain old functions
*
* @return A Definition object to represent this function
*/
protected FunctionDefinition createFunctionDefinition(String name)
{
return new FunctionDefinition(name);
}
/**
* Get the function keyword
*
* @return node containing the function keyword
*/
public KeywordNode getFunctionKeywordNode()
{
return contentsPart.getFunctionKeywordNode();
}
/**
* Determine whether this is a package-level function (i.e. a function
* defined in a package, as opposed to a class or some other scope)
*
* @return true if this is a package-level function
*/
public boolean isPackageLevelFunction()
{
// regular package-level function
IASNode parent = getParent();
IASNode parent2 = parent.getParent();
if (parent instanceof BlockNode && parent2 instanceof PackageNode)
return true;
// constructor
if (parent2 != null)
{
IASNode parent3 = parent2.getParent();
if (isConstructor() &&
parent2 instanceof ClassNode &&
parent3 instanceof BlockNode &&
parent3.getParent() instanceof PackageNode)
{
return true;
}
}
return false;
}
/**
* Get the real namespace node, or null if there isn't one. Used by
* semantics. This differs from getNamespaceNode above, as it will not
* construct an implicit public namespace if one is missing
*/
public INamespaceDecorationNode getActualNamespaceNode()
{
return super.getNamespaceNode();
}
/**
* Is this a constructor of the specified class (assumes that this function
* definition is actually located in the body of the specified class)
*/
public boolean isConstructorOf(ClassNode classNode)
{
return this.equals(classNode.getConstructorNode());
}
/**
* Get any saved parsing problems from lazily parsing the function body.
* This list will be nulled out after this method is called,
* so we don't start leaking parser problems.
*
* @return Collection of problems encountered while parsing the function
* or an empty list if there were none.
*
*/
public Collection<ICompilerProblem> getParsingProblems()
{
if (parseProblems != null)
{
Collection<ICompilerProblem> problems = parseProblems;
parseProblems = null;
return problems;
}
return Collections.emptyList();
}
/**
* Build AST for the function body from the buffered function body text.
* <p>
* Make sure {@link PostProcessStep#POPULATE_SCOPE} has been applied to the
* containing {@code FileNode} This method always populate scopes of the
* rebuilt function node. If the scopes for the containing nodes weren't
* initialized, the rebuilt scopes can attach itself to it's parent.
*/
public final void parseFunctionBody(final Collection<ICompilerProblem> problems)
{
if (!isBodyDeferred)
return;
deferredBodyParsingLock.lock();
try
{
deferredBodyParsingReferenceCount++;
assert problems != null : "Problems collection can't be null";
final ScopedBlockNode contents = contentsPart.getContents();
assert contents != null : "Function body node can't be null: function " + getName();
// Only re-parse if the function body text is not empty, and the
// function body node doesn't have any children.
if (contents.getChildCount() > 0)
return;
assert deferredBodyParsingReferenceCount == 1;
assert openT != null : "Expected '{' token.";
final String sourcePath = getSourcePath();
assert sourcePath != null && !sourcePath.isEmpty() : "Souce path not set.";
final FileNode fileNode = (FileNode)getAncestorOfType(FileNode.class);
assert fileNode != null : "FileNode not found: function " + getName();
final IWorkspace workspace = fileNode.getWorkspace();
ASFileScope fileScope = fileNode.getFileScope();
fileScope.addParsedFunctionBodies(this);
try
{
// select function body source
final Reader sourceReader;
if (functionBodyText != null)
{
// from cached body text
sourceReader = new StringReader(functionBodyText);
}
else
{
// from file using offset
sourceReader = workspace.getFileSpecification(sourcePath).createReader();
sourceReader.skip(openT.getLocalEnd());
}
assert !anyNonParametersInScope(contents);
// rebuild function body AST
// The incoming "problems" collection might be under modifications from
// other code generation threads. In order to filter problems after parsing,
// a local problem collection is created and added to the main problem
// collection later.
final List<ICompilerProblem> functionLocalProblems = new ArrayList<ICompilerProblem>();
ASParser.parseFunctionBody(
contents,
sourceReader,
sourcePath,
openT,
functionLocalProblems,
workspace,
fileNode,
configProcessor);
filterObsoleteProblems(fileNode, functionLocalProblems);
problems.addAll(functionLocalProblems);
// dispose cached function body info
functionBodyText = null;
// We should release "openT" as well. However, incremental compilation
// needs this to redo code-generation.
// openT = null;
// connect function and its body scope
final EnumSet<PostProcessStep> postProcess = EnumSet.of(
PostProcessStep.CALCULATE_OFFSETS,
PostProcessStep.POPULATE_SCOPE,
PostProcessStep.RECONNECT_DEFINITIONS);
problems.addAll(contents.runPostProcess(postProcess, contents.getASScope()));
// add implicit "arguments" argument to the local scope
tryAddDefaultArgument();
}
catch (IOException e)
{
problems.add(new InternalCompilerProblem2(this.getSourcePath(), e, "function body parser"));
}
}
finally
{
deferredBodyParsingLock.unlock();
}
}
/**
* {@link BaseASParser} is stateful. The state is essential in compiler
* problem creation. However, when re-parsing a deferred function body, the
* parser state can't be fully restored. As a result, some compiler problems
* can be obsolete. This function removes those unwanted problems.
*
* @param fileNode AST root node.
* @param problems compiler problems found in the deferred function body.
*/
private void filterObsoleteProblems(FileNode fileNode, Collection<ICompilerProblem> localProblems)
{
final int functionStartLine = this.getLine();
final Collection<ICompilerProblem> problems = fileNode.getProblems();
final Collection<ICompilerProblem> filteredLocalProblems = filter(
localProblems,
and(problemAtLine(functionStartLine), problemOfType(CanNotInsertSemicolonProblem.class)));
// If the function signature has syntax error, the first "unterminated statement" problem
// from function body is then obsolete.
if (!filteredLocalProblems.isEmpty())
{
final Collection<ICompilerProblem> functionSignatureProblems =
filter(problems, problemAtLine(functionStartLine));
if (!functionSignatureProblems.isEmpty())
{
localProblems.removeAll(filteredLocalProblems);
}
}
}
/**
* IFilter {@link ICompilerProblem} collections by line number.
*/
private static Predicate<ICompilerProblem> problemAtLine(final int line)
{
return new Predicate<ICompilerProblem>()
{
@Override
public boolean apply(ICompilerProblem problem)
{
return problem.getLine() == line;
}
};
}
/**
* IFilter {@link ICompilerProblem} collections by class.
*/
private static Predicate<ICompilerProblem> problemOfType(final Class<? extends ICompilerProblem> problemClass)
{
return new Predicate<ICompilerProblem>()
{
@Override
public boolean apply(ICompilerProblem problem)
{
return problemClass.isInstance(problem);
}
};
}
private static boolean anyNonParametersInScope(ScopedBlockNode contents)
{
IASScope sc = contents.getScope();
Collection<IDefinition> ldfs = sc.getAllLocalDefinitions();
for (IDefinition def : ldfs)
{
if (!(def instanceof IParameterDefinition))
return true;
}
return false;
}
/**
* Delete all children nodes in a function body.
*/
public final void discardFunctionBody()
{
if (!isBodyDeferred || containsLocalFunctions())
return;
deferredBodyParsingLock.lock();
try
{
deferredBodyParsingReferenceCount--;
// only discard the body once there are 0 reference to it
if (deferredBodyParsingReferenceCount > 0)
return;
final ScopedBlockNode contents = getScopedNode();
if (contents.getChildCount() > 0)
{
final FileNode fileNode = (FileNode)getAncestorOfType(FileNode.class);
ASFileScope fileScope = fileNode.getFileScope();
fileScope.removeParsedFunctionBodies(this);
contents.removeAllChildren();
// Now we need to remove all the definitions in this function scope, except
// we keep the parameters. This is because the initial "skeleton parse" goes as
// far as the parameters.
// So when we throw away the body, we still need to keep the parameter definitions
IASScope functionScope = contents.getScope();
Collection<IDefinition> localDefs = functionScope.getAllLocalDefinitions();
for (IDefinition def : localDefs)
{
if (! (def instanceof IParameterDefinition))
{
ASScope asScope = (ASScope)functionScope;
asScope.removeDefinition(def);
}
}
}
assert (contents.getScope() == null) || (!anyNonParametersInScope(contents));
}
finally
{
deferredBodyParsingLock.unlock();
}
}
public final boolean hasBeenParsed()
{
if (!isBodyDeferred)
return true;
deferredBodyParsingLock.lock();
try
{
return deferredBodyParsingReferenceCount > 0;
}
finally
{
deferredBodyParsingLock.unlock();
}
}
/**
* Store the function body text on the function node so that the AST nodes
* can be rebuilt later.
*/
public final void setFunctionBodyInfo(ASToken openT, ASToken lastTokenInBody,
ConfigProcessor configProcessor,
StringBuilder bodyCache)
{
assert openT != null : "Open curly token can't be null";
assert openT.getType() == ASTokenTypes.TOKEN_BLOCK_OPEN : "Expected '{' token.";
assert lastTokenInBody != null : "Last token in function body can't be null.";
assert configProcessor != null : "Project config variables can't be null.";
this.openT = openT.clone();
this.configProcessor = configProcessor;
this.isBodyDeferred = true;
if (bodyCache == null)
this.functionBodyText = null;
else
this.functionBodyText = bodyCache.toString();
}
private ArrayList<IFunctionNode> localFunctions;
@Override
public List<IFunctionNode> getLocalFunctions()
{
return localFunctions;
}
@Override
public boolean containsLocalFunctions()
{
return localFunctions != null;
}
@Override
public void rememberLocalFunction(IFunctionNode value)
{
if (localFunctions == null)
localFunctions = new ArrayList<IFunctionNode>();
localFunctions.add(value);
}
private boolean emitLocalFunctions;
@Override
public boolean getEmittingLocalFunctions()
{
return emitLocalFunctions;
}
@Override
public void setEmittingLocalFunctions(boolean emit)
{
emitLocalFunctions = emit;
}
}
|
/*
* Ascent MMORPG Server
* Copyright (C) 2005-2008 Ascent Team <http://www.ascentemu.com/>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Affero General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Affero General Public License for more details.
*
* You should have received a copy of the GNU Affero General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "StdAfx.h"
//////////////////////////////////////////////////////////////
/// This function handles CMSG_NAME_QUERY:
//////////////////////////////////////////////////////////////
void WorldSession::HandleNameQueryOpcode( WorldPacket & recv_data )
{
CHECK_PACKET_SIZE(recv_data, 8);
uint64 guid;
recv_data >> guid;
PlayerInfo *pn = objmgr.GetPlayerInfo( (uint32)guid );
if(!pn)
return;
sLog.outDebug( "Received CMSG_NAME_QUERY for: %s", pn->name );
WorldPacket data(SMSG_NAME_QUERY_RESPONSE, strlen(pn->name) + 35);
data << pn->guid << uint32(0); //highguid
data << pn->name;
data << uint8(0); // this probably is "different realm" or something flag.
data << pn->race << pn->gender << pn->cl;
data << uint8(0); // 2.4.0, why do i get the feeling blizz is adding custom classes or custom titles? (same thing in who list)
SendPacket( &data );
}
//////////////////////////////////////////////////////////////
/// This function handles CMSG_QUERY_TIME:
//////////////////////////////////////////////////////////////
void WorldSession::HandleQueryTimeOpcode( WorldPacket & recv_data )
{
uint32 t = (uint32)UNIXTIME;
#ifdef USING_BIG_ENDIAN
swap32(&t);
#endif
OutPacket(SMSG_QUERY_TIME_RESPONSE, 4, &t);
}
//////////////////////////////////////////////////////////////
/// This function handles CMSG_CREATURE_QUERY:
//////////////////////////////////////////////////////////////
void WorldSession::HandleCreatureQueryOpcode( WorldPacket & recv_data )
{
CHECK_PACKET_SIZE(recv_data, 12);
WorldPacket data(SMSG_CREATURE_QUERY_RESPONSE, 150);
uint32 entry;
uint64 guid;
CreatureInfo *ci;
recv_data >> entry;
recv_data >> guid;
if(entry == 300000)
{
data << (uint32)entry;
data << "WayPoint";
data << uint8(0) << uint8(0) << uint8(0);
data << "Level is WayPoint ID";
for(uint32 i = 0; i < 8;i++)
{
data << uint32(0);
}
data << uint8(0);
}
else
{
ci = CreatureNameStorage.LookupEntry(entry);
if(ci == NULL)
return;
LocalizedCreatureName * lcn = (language>0) ? sLocalizationMgr.GetLocalizedCreatureName(entry, language) : NULL;
if(lcn == NULL)
{
sLog.outDetail("WORLD: CMSG_CREATURE_QUERY '%s'", ci->Name);
data << (uint32)entry;
data << ci->Name;
data << uint8(0) << uint8(0) << uint8(0);
data << ci->SubName;
}
else
{
sLog.outDetail("WORLD: CMSG_CREATURE_QUERY '%s' (localized to %s)", ci->Name, lcn->Name);
data << (uint32)entry;
data << lcn->Name;
data << uint8(0) << uint8(0) << uint8(0);
data << lcn->SubName;
}
data << ci->info_str; //!!! this is a string in 2.3.0 Example: stormwind guard has : "Direction"
data << ci->Flags1;
data << ci->Type;
data << ci->Family;
data << ci->Rank;
data << ci->Unknown1;
data << ci->SpellDataID;
data << ci->Male_DisplayID;
data << ci->Female_DisplayID;
data << ci->unkint1;
data << ci->unkint2;
data << ci->unkfloat1;
data << ci->unkfloat2;
data << ci->Leader;
}
SendPacket( &data );
}
//////////////////////////////////////////////////////////////
/// This function handles CMSG_GAMEOBJECT_QUERY:
//////////////////////////////////////////////////////////////
void WorldSession::HandleGameObjectQueryOpcode( WorldPacket & recv_data )
{
CHECK_PACKET_SIZE(recv_data, 12);
WorldPacket data(SMSG_GAMEOBJECT_QUERY_RESPONSE, 300);
uint32 entryID;
uint64 guid;
GameObjectInfo *goinfo;
recv_data >> entryID;
recv_data >> guid;
sLog.outDetail("WORLD: CMSG_GAMEOBJECT_QUERY '%u'", entryID);
goinfo = GameObjectNameStorage.LookupEntry(entryID);
if(goinfo == NULL)
return;
LocalizedGameObjectName * lgn = (language>0) ? sLocalizationMgr.GetLocalizedGameObjectName(entryID, language) : NULL;
data << entryID;
data << goinfo->Type;
data << goinfo->DisplayID;
if(lgn)
data << lgn->Name;
else
data << goinfo->Name;
data << uint8(0) << uint8(0) << uint8(0) << uint8(0) << uint8(0) << uint8(0); // new string in 1.12
data << goinfo->SpellFocus;
data << goinfo->sound1;
data << goinfo->sound2;
data << goinfo->sound3;
data << goinfo->sound4;
data << goinfo->sound5;
data << goinfo->sound6;
data << goinfo->sound7;
data << goinfo->sound8;
data << goinfo->sound9;
data << goinfo->Unknown1;
data << goinfo->Unknown2;
data << goinfo->Unknown3;
data << goinfo->Unknown4;
data << goinfo->Unknown5;
data << goinfo->Unknown6;
data << goinfo->Unknown7;
data << goinfo->Unknown8;
data << goinfo->Unknown9;
data << goinfo->Unknown10;
data << goinfo->Unknown11;
data << goinfo->Unknown12;
data << goinfo->Unknown13;
data << goinfo->Unknown14;
SendPacket( &data );
}
//////////////////////////////////////////////////////////////
/// This function handles MSG_CORPSE_QUERY:
//////////////////////////////////////////////////////////////
void WorldSession::HandleCorpseQueryOpcode(WorldPacket &recv_data)
{
sLog.outDetail("WORLD: Received MSG_CORPSE_QUERY");
Corpse *pCorpse;
WorldPacket data(MSG_CORPSE_QUERY, 21);
MapInfo *pMapinfo;
pCorpse = objmgr.GetCorpseByOwner(GetPlayer()->GetLowGUID());
if(pCorpse)
{
pMapinfo = WorldMapInfoStorage.LookupEntry(pCorpse->GetMapId());
if(pMapinfo)
{
if(pMapinfo->type == INSTANCE_NULL || pMapinfo->type == INSTANCE_PVP)
{
data << uint8(0x01); //show ?
data << pCorpse->GetMapId(); // mapid (that tombstones shown on)
data << pCorpse->GetPositionX();
data << pCorpse->GetPositionY();
data << pCorpse->GetPositionZ();
data << pCorpse->GetMapId(); //instance mapid (needs to be same as mapid to be able to recover corpse)
SendPacket(&data);
}
else
{
data << uint8(0x01); //show ?
data << pMapinfo->repopmapid; // mapid (that tombstones shown on)
data << pMapinfo->repopx;
data << pMapinfo->repopy;
data << pMapinfo->repopz;
data << pCorpse->GetMapId(); //instance mapid (needs to be same as mapid to be able to recover corpse)
SendPacket(&data);
}
}
else
{
data.Initialize(MSG_CORPSE_QUERY);
data << uint8(0x01); //show ?
data << pCorpse->GetMapId(); // mapid (that tombstones shown on)
data << pCorpse->GetPositionX();
data << pCorpse->GetPositionY();
data << pCorpse->GetPositionZ();
data << pCorpse->GetMapId(); //instance mapid (needs to be same as mapid to be able to recover corpse)
SendPacket(&data);
}
}
}
void WorldSession::HandlePageTextQueryOpcode( WorldPacket & recv_data )
{
CHECK_PACKET_SIZE(recv_data, 4);
uint32 pageid = 0;
recv_data >> pageid;
ItemPage * page = ItemPageStorage.LookupEntry(pageid);
if(!page)
return;
LocalizedItemPage * lpi = (language>0) ? sLocalizationMgr.GetLocalizedItemPage(pageid,language):NULL;
WorldPacket data(SMSG_PAGE_TEXT_QUERY_RESPONSE, 1000);
data << pageid;
if(lpi)
data << lpi->Text;
else
data << page->text;
data << page->next_page;
SendPacket(&data);
}
//////////////////////////////////////////////////////////////
/// This function handles CMSG_ITEM_NAME_QUERY:
//////////////////////////////////////////////////////////////
void WorldSession::HandleItemNameQueryOpcode( WorldPacket & recv_data )
{
CHECK_PACKET_SIZE(recv_data, 4);
WorldPacket reply(SMSG_ITEM_NAME_QUERY_RESPONSE, 100);
uint32 itemid;
recv_data >> itemid;
reply << itemid;
ItemPrototype *proto=ItemPrototypeStorage.LookupEntry(itemid);
if(!proto)
reply << "Unknown Item";
else
{
LocalizedItem * li = (language>0) ? sLocalizationMgr.GetLocalizedItem(itemid, language) : NULL;
if(li)
reply << li->Name;
else
reply << proto->Name1;
}
SendPacket(&reply);
}
void WorldSession::HandleInrangeQuestgiverQuery(WorldPacket & recv_data)
{
CHECK_INWORLD_RETURN;
WorldPacket data(SMSG_INRANGE_QUESTGIVER_STATUS_QUERY_RESPONSE, 1000);
Object::InRangeSet::iterator itr;
Creature * pCreature;
uint32 count = 0;
data << count;
// 32 count
// <foreach count>
// 64 guid
// 8 status
for( itr = _player->m_objectsInRange.begin(); itr != _player->m_objectsInRange.end(); ++itr )
{
pCreature = static_cast<Creature*>(*itr);
if( pCreature->GetTypeId() != TYPEID_UNIT )
continue;
if( pCreature->isQuestGiver() )
{
data << pCreature->GetGUID();
data << uint8(sQuestMgr.CalcStatus( pCreature, _player ));
++count;
}
}
*(uint32*)(data.contents()) = count;
SendPacket(&data);
}
|
A man accused of ramming his truck into a car carrying two FBI agents pleaded guilty in federal court Wednesday, the Las Vegas Review Journal reports.
Yatnier Gonzalez, 32, pleaded guilty to one count of assault on a federal officer.
He will be sentenced on March 12.
The two agents are members of the Las Vegas Criminal Apprehension Team, which searches for fugitives. They were not injured but the car was damaged.
The incident happened on June 2 when the agents tried to block in Gonzalez’s car at a gas station in Las Vegas. Gonzalez was a home invasion suspect at the time.
Posted: 10/30/14 at 9:17 AM under News Story. |
In collaboration with pop-up team Xiao Bao Biscuit, the newly opened restaurant Two Boroughs Larder on Coming Street is hosting a 3 course meal celebrating the season for only $20 this Tuesday, October 18th.
In the style of dim sum, tapas, and family suppers, Xiao Bao & Two Boroughs Larder are putting together a 3 course dinner consisting of small plates with your choice of two items for each course. You'll have your choice of two options for each course with drinks and dessert extra. Sharing is encouraged for all to enjoy a variety of dishes that highlight the season and celebrate the coming of Fall. |
Dumonde Tech is the first and only lubricant company in the bicycle industry to specifically design a lubricant for Pawl style freehubs which require a lightweight lubricant. PRO X Freehub Oilusing our MRCC Micro Resistant Complex Compounds and is an improved new technology of our original freehub oil. PRO X Freehub Oilperforms better in an even wider temperature range. “Pour Point” is lower than -40F / -40C degrees, is extremely low friction, providing superior protection. No sticking pawls due to age or temperatures.
Our MRCC Micro Resistant Complex Compoundshave been in development for over 10 years by Dumonde Tech Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our Motorsports lubricants, MRCC, is incorporated into our revolutionary PRO X bicycle lubricants. Everyone who has tested or raced using PRO X, report that its performance is significantly better then any other lube they have ever used.
PRO X Freehub Oil is Used, Sold, Endorsed and highly Recommended by: Industry 9 “Torch” hubs, Project321 and Kappius Components.
Used, Endorsed and Recommended: Pacenti Cycle Design, Profile Racing, Crank Brothers, Ritchey Design, Loaded and e*thirteen. |
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<title>TurboJPEG: tjregion Struct Reference</title>
<link href="tabs.css" rel="stylesheet" type="text/css"/>
<link href="search/search.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="search/search.js"></script>
<link href="doxygen.css" rel="stylesheet" type="text/css"/>
</head>
<body onload='searchBox.OnSelectItem(0);'>
<!-- Generated by Doxygen 1.7.4 -->
<script type="text/javascript"><!--
var searchBox = new SearchBox("searchBox", "search",false,'Search');
--></script>
<div id="top">
<div id="titlearea">
<table cellspacing="0" cellpadding="0">
<tbody>
<tr style="height: 56px;">
<td style="padding-left: 0.5em;">
<div id="projectname">TurboJPEG <span id="projectnumber">1.2</span></div>
</td>
</tr>
</tbody>
</table>
</div>
<div id="navrow1" class="tabs">
<ul class="tablist">
<li><a href="index.html"><span>Main Page</span></a></li>
<li><a href="modules.html"><span>Modules</span></a></li>
<li class="current"><a href="annotated.html"><span>Data Structures</span></a></li>
<li id="searchli">
<div id="MSearchBox" class="MSearchBoxInactive">
<span class="left">
<img id="MSearchSelect" src="search/mag_sel.png"
onmouseover="return searchBox.OnSearchSelectShow()"
onmouseout="return searchBox.OnSearchSelectHide()"
alt=""/>
<input type="text" id="MSearchField" value="Search" accesskey="S"
onfocus="searchBox.OnSearchFieldFocus(true)"
onblur="searchBox.OnSearchFieldFocus(false)"
onkeyup="searchBox.OnSearchFieldChange(event)"/>
</span><span class="right">
<a id="MSearchClose" href="javascript:searchBox.CloseResultsWindow()"><img id="MSearchCloseImg" border="0" src="search/close.png" alt=""/></a>
</span>
</div>
</li>
</ul>
</div>
<div id="navrow2" class="tabs2">
<ul class="tablist">
<li><a href="annotated.html"><span>Data Structures</span></a></li>
<li><a href="classes.html"><span>Data Structure Index</span></a></li>
<li><a href="functions.html"><span>Data Fields</span></a></li>
</ul>
</div>
</div>
<div class="header">
<div class="summary">
<a href="#pub-attribs">Data Fields</a> </div>
<div class="headertitle">
<div class="title">tjregion Struct Reference<div class="ingroups"><a class="el" href="group___turbo_j_p_e_g.html">TurboJPEG</a></div></div> </div>
</div>
<div class="contents">
<!-- doxytag: class="tjregion" -->
<p>Cropping region.
<a href="structtjregion.html#details">More...</a></p>
<p><code>#include <turbojpeg.h></code></p>
<table class="memberdecls">
<tr><td colspan="2"><h2><a name="pub-attribs"></a>
Data Fields</h2></td></tr>
<tr><td class="memItemLeft" align="right" valign="top">int </td><td class="memItemRight" valign="bottom"><a class="el" href="structtjregion.html#a4b6a37a93997091b26a75831fa291ad9">x</a></td></tr>
<tr><td class="mdescLeft"> </td><td class="mdescRight">The left boundary of the cropping region. <a href="#a4b6a37a93997091b26a75831fa291ad9"></a><br/></td></tr>
<tr><td class="memItemLeft" align="right" valign="top">int </td><td class="memItemRight" valign="bottom"><a class="el" href="structtjregion.html#a7b3e0c24cfe87acc80e334cafdcf22c2">y</a></td></tr>
<tr><td class="mdescLeft"> </td><td class="mdescRight">The upper boundary of the cropping region. <a href="#a7b3e0c24cfe87acc80e334cafdcf22c2"></a><br/></td></tr>
<tr><td class="memItemLeft" align="right" valign="top">int </td><td class="memItemRight" valign="bottom"><a class="el" href="structtjregion.html#ab6eb73ceef584fc23c8c8097926dce42">w</a></td></tr>
<tr><td class="mdescLeft"> </td><td class="mdescRight">The width of the cropping region. <a href="#ab6eb73ceef584fc23c8c8097926dce42"></a><br/></td></tr>
<tr><td class="memItemLeft" align="right" valign="top">int </td><td class="memItemRight" valign="bottom"><a class="el" href="structtjregion.html#aecefc45a26f4d8b60dd4d825c1710115">h</a></td></tr>
<tr><td class="mdescLeft"> </td><td class="mdescRight">The height of the cropping region. <a href="#aecefc45a26f4d8b60dd4d825c1710115"></a><br/></td></tr>
</table>
<hr/><a name="details" id="details"></a><h2>Detailed Description</h2>
<div class="textblock"><p>Cropping region. </p>
</div><hr/><h2>Field Documentation</h2>
<a class="anchor" id="aecefc45a26f4d8b60dd4d825c1710115"></a><!-- doxytag: member="tjregion::h" ref="aecefc45a26f4d8b60dd4d825c1710115" args="" -->
<div class="memitem">
<div class="memproto">
<table class="memname">
<tr>
<td class="memname">int <a class="el" href="structtjregion.html#aecefc45a26f4d8b60dd4d825c1710115">tjregion::h</a></td>
</tr>
</table>
</div>
<div class="memdoc">
<p>The height of the cropping region. </p>
<p>Setting this to 0 is the equivalent of setting it to the height of the source JPEG image - y. </p>
</div>
</div>
<a class="anchor" id="ab6eb73ceef584fc23c8c8097926dce42"></a><!-- doxytag: member="tjregion::w" ref="ab6eb73ceef584fc23c8c8097926dce42" args="" -->
<div class="memitem">
<div class="memproto">
<table class="memname">
<tr>
<td class="memname">int <a class="el" href="structtjregion.html#ab6eb73ceef584fc23c8c8097926dce42">tjregion::w</a></td>
</tr>
</table>
</div>
<div class="memdoc">
<p>The width of the cropping region. </p>
<p>Setting this to 0 is the equivalent of setting it to the width of the source JPEG image - x. </p>
</div>
</div>
<a class="anchor" id="a4b6a37a93997091b26a75831fa291ad9"></a><!-- doxytag: member="tjregion::x" ref="a4b6a37a93997091b26a75831fa291ad9" args="" -->
<div class="memitem">
<div class="memproto">
<table class="memname">
<tr>
<td class="memname">int <a class="el" href="structtjregion.html#a4b6a37a93997091b26a75831fa291ad9">tjregion::x</a></td>
</tr>
</table>
</div>
<div class="memdoc">
<p>The left boundary of the cropping region. </p>
<p>This must be evenly divisible by the MCU block width (see <a class="el" href="group___turbo_j_p_e_g.html#ga9e61e7cd47a15a173283ba94e781308c" title="MCU block width (in pixels) for a given level of chrominance subsampling.">tjMCUWidth</a>.) </p>
</div>
</div>
<a class="anchor" id="a7b3e0c24cfe87acc80e334cafdcf22c2"></a><!-- doxytag: member="tjregion::y" ref="a7b3e0c24cfe87acc80e334cafdcf22c2" args="" -->
<div class="memitem">
<div class="memproto">
<table class="memname">
<tr>
<td class="memname">int <a class="el" href="structtjregion.html#a7b3e0c24cfe87acc80e334cafdcf22c2">tjregion::y</a></td>
</tr>
</table>
</div>
<div class="memdoc">
<p>The upper boundary of the cropping region. </p>
<p>This must be evenly divisible by the MCU block height (see <a class="el" href="group___turbo_j_p_e_g.html#gabd247bb9fecb393eca57366feb8327bf" title="MCU block height (in pixels) for a given level of chrominance subsampling.">tjMCUHeight</a>.) </p>
</div>
</div>
<hr/>The documentation for this struct was generated from the following file:<ul>
<li>turbojpeg.h</li>
</ul>
</div>
<!-- window showing the filter options -->
<div id="MSearchSelectWindow"
onmouseover="return searchBox.OnSearchSelectShow()"
onmouseout="return searchBox.OnSearchSelectHide()"
onkeydown="return searchBox.OnSearchSelectKey(event)">
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark"> </span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark"> </span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark"> </span>Variables</a></div>
<!-- iframe showing the search results (closed by default) -->
<div id="MSearchResultsWindow">
<iframe src="javascript:void(0)" frameborder="0"
name="MSearchResults" id="MSearchResults">
</iframe>
</div>
<hr class="footer"/><address class="footer"><small>Generated on Sun Dec 18 2011 20:09:47 for TurboJPEG by 
<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/></a> 1.7.4 </small></address>
</body>
</html>
|
The number of farmers choosing to complete their Single Application Forms through Rural Payments Wales Online has more than doubled compared with last year, according to the Welsh Government.
It said that since February more than 2,500 of the online submissions had been made, and over 60% of farmers or their agents have registers. This has led it to forecast that online applications will far outnumber those made on paper this year.
Rebecca Evans, the deputy minister for farming and food, emphasised that next year only the online channel will be available, but that the forms should be easier to complete in future.
"This year's SAFs will take longer to complete compared to previous years because this is the first year of the new Basic Payment Scheme," she said. "While there is a lot of additional information required from farmers under the new regulations, developing the Single Application Form online has meant we have been able to incorporate lots of smart features that help to reduce the time it takes to complete and prevent some of the common mistakes that can be made.
"Although the European Commission is thought likely to provide member states the option to extend the deadline for SAF submission from 15 May to 15 June, I will not take up this option as it will delay the start of part payments to all claimants."
Northern Ireland's criminal history disclosure service has been moved fully online as part of the Executive's Digital First initiative. It is now hosted on the indirect web platform.
Justice Minister David Ford said: "The key benefits include the quicker return of many certificates, online validation to help with form completion and a case tracking facility for individuals and employers to obtain updates on the progress of an application. It should also help organisations that require the checks to reduce their administration costs.
"The new service will also enable AccessNI, during 2016, to offer portable certificates that applicants can take to different jobs, thus reducing the need for a certificate to be obtained for every new position.
"In taking this step, AccessNI will be the first disclosure service in the UK to provide the full range of services online.
US based 3M Library Systems has made its 3M Cloud Library Digital Lending System available to libraries in the UK.
Under the system, borrowers obtain a PIN to log in to the service and can check out e-books and audio books to PCs, smartphones and tablets through the 3M Cloud Library app, and dedicated e-readers such as Nook, Sony and Kobo. They can browse libraries' digital collections with 3M's Discovery Stations, and librarians can curate their collections from a catalogue of several hundred thousand e-books and audio books.
The system is already available to more than 1,000 libraries in the US and Canada.
Not-for-profit cloud services provider Eduserve has begun to support Amazon Web Service (AWS) as part of its Assured Hyrbrid Cloud Service. The latter provides an integrated platform for hosting public sector data with a blend of security controls covering Official and Official Sensitive data.
The service brings together Eduserv's secure cloud hosting, currently Pan Government Accredited to IL3, and the AWS Cloud, with Eduserv's Cloud Connector enabling applications to securely share information across security domains. The company said the service is designed for organisations that need the flexibility and economies of scale offered by AWS, but need to keep some data in a UK sovereign cloud service.
Ed Zedlewski, managing director of managed cloud services at Eduserv said: "One of the major barriers to adoption of cloud computing is the handling of Official Sensitive data. Our hybrid cloud, coupled with AWS, provides a secure, accredited cloud environment for sensitive information.
"AWS is continuously innovating and adding new features and services. We are working with AWS to help make this rich environment of services more accessible to the public sector to help them accelerate the delivery of online services.
Suffolk County Council has reportedly obtained significant time savings through the use of the Learning Management System from WebBased.
Its Workforce Development team has used the system to manage the organisation's continuous professional development (CPD) events, and has reduced the administration time from an average of four hours to 15 minutes for each, largely through the use of an online booking system. The council stages approximately 3,000 CPD events per year, which amounts to 11,250 hours saved.
Fiona Denny, Suffolk's head of workforce development, said: "It has also supported our multi-agency working, with increasing numbers of partners using the system to advertise their programmes and opening them out to other professional groups."
Skyhigh Networks, a cloud security and enablement company, and Skyscape Cloud Services, which exclusively provides the UK public sector, have announced a partnership to deliver cloud security services via the G-Cloud.
The former will host its services on the latter's assured platform to provide security and compliance capabilities for UK public sector organisations and non-UK-hosted cloud services such as Salesforce, Box, Office 365, Jive, ServiceNow, Jive and Dropbox. The service can encrypt and/or tokenise data in motion with the government body holding the encryption keys, ensuring that no data leaves the UK. In addition, the service can deliver data loss prevention, cloud activity monitoring and anomaly detection.
Skyhigh said this will enable public authorities to use hundreds of cloud services while providing the necessary data protection. |
每日新歌： 张磊刘惜君唱响独孤皇后 Learn to play fingerstyle solos for ukulele download.
Welcome to Stefan Grossman' s Guitar Workshop Audio CDs , the Vestapol series of historic , Vestapol Videos, Books, offering the best in instructional guitar DVDs concert DVDs. We offer a wide variety of DVD flatpicking guitar styles , CD audio guitar lessons focusing on various aspects of fingerstyle arch the world' s most comprehensive index of full- text books.
This book ( and the companion Favorite Fingerstyle Solos for Ukulele) are much better than the Eric Cutshall Chord Melody Solos book. The arrangements start out at a beginner level ( though more difficult than most of the songs in the Cutshall book) and progress nicely to fairly advanced ones.
If you want to take your ukulele playing to the next level, you need to start using your fingers! The sample songs and patterns found in this book with online audio access will get you started both playing solos and accompaniment fingerstyle. |
The following information explains the City of Fountain Valley's (City) policy regarding any information you may supply to us when visiting our site that are part of the City's official web site and any information that may be provided to the public by the City's official site.The official City of Fountain Valley website is intended for City of Fountain Valley business only. It is intended to provide information about the operation of the City, to clarify the function of City departments and services and provide guidance to members of the public who desire/require city services. Information (words, photos and graphics) on the website is intended in every respect to be one-way and informational in nature. The website is not intended to directly or indirectly create a public forum or invite discourse.
Contains information of general interest to the public and reflecting a City of Fountain Valley departmental, divisional, or program initiative, range of service, or responsibility OR contains directional information of interest to the public, such as maps, directories of goods and services, etc.; OR provides public notice of a specific event which is open to the public and has received City sponsorship as authorized by Fountain Valley City Manager direction or his delegates. Fulfills the City of Fountain Valley publishing protocols.
Avoids the posting of ad hoc content and hyperlink additions. All such content must be subject to citywide website standards as outlined in his policy.
On certain occasions, the public has opportunities to share personal information online with the City in order to facilitate better correspondence and service. This information includes but is not limited to e-mail addresses, responses to surveys, registering for services and new services to be created. The City will not disclose this information to any third party, unless required to do so under federal or state law, including, but not limited to the California Public Records Act.
The City’s goal in collecting personal information online is to provide you, with the most personalized and effective service possible. By understanding your needs and preferences, the City will be in a better position to provide you with improved service. The City will maintain the confidentiality of information it receives online to the same extent it is legally able to do so with respect to information obtained through other means. Using e-mail addresses provided at registration or otherwise, users are giving the City permission to periodically send out e-mail newsletters and promotional email to our users about web site updates, and product and service information offered by the City. Users may indicate that they do not wish to receive e-mail information from the City. Upon request, the City will remove users (and their information) from the City database or permit them to elect not to receive any further e-mail newsletters or contact. Communications made through e-mail and messaging systems shall in no way be deemed to constitute legal notice to the City or any of its agencies, officers, employees, agents or representatives, with respect to any existing or potential claim or cause of action against the City or any of its agencies, officers, employees, agents, or representatives, where notice to the City is required by any federal, state or local laws, rules or regulations.
One of the City services online is to provide educational information about Fountain Valley; therefore, children are not restricted from visiting the City site. The City urges children only to give the City any information after getting permission from their parents or guardians. In some cases, there are age limits for certain contests and give-a-ways.
That the functions contained in the materials will be uninterrupted or error-free.That defects will be promptly corrected.That this site or the server that makes it available is free of viruses or other harmful components.
That the City is responsible for the content or the privacy policies of websites to which it may provide links.
The City's web servers are maintained to provide public access to City information via the Internet. The City's web services and the content of its web servers and databases are updated on a continual basis. While the City attempts to keep its web information accurate and timely, the City neither warrants nor makes representations or endorsements as to the quality, content, accuracy or completeness of the information, text, graphics, hyperlinks, and other items contained on this server or any other server. Web materials have been compiled from a variety of sources, and are subject to change without notice from the City as a result of updates and corrections. Further, some materials on the City's website and related links may be protected by copyright law, therefore, if you have any questions regarding whether you may: a) modify and/or re-use text, images or other web content from a City server, b) distribute the City's web content, and/or c) "mirror" the City's information on a non-City server, please contact the City's Public Information Officer.
The City uses reasonable precautions to keep the personal information disclosed to the City secure.The City web site employs industry-standard methods to monitor network traffic to identify unauthorized attempts to upload or change information or otherwise cause damage.
Entities and organizations wishing to establish external links on the City's official website must seek prior approval. The City of Fountain Valley reserves the right to 1) deny an external link application as to any business or organization when it is determined, following review of a complete application, that the entity or organization for which application is made does not meet the criteria set forth in this policy; 2) deny an external link application as to any business or organization which fails to provide all required information, or fails to provide truthful information; 3) remove any external link if the nature of the business or organization to which the link relates no longer complies with the City's external link policy; or 4) to revise this policy without prior notice when to do so is deemed to be in the best interests of the City. Any external entity or organization that receives approval from the City of Fountain shall sign a statement agreeing to indemnify, defend with counsel reasonably acceptable to the City, and hold the City of Fountain Valley harmless from any and all claims or liability that may arise from the use of the City’s website or that is in any way connected to the City us of the City’s website.
The City of Fountain Valley logo is the property of the City of Fountain Valley. Any use of the materials stored on the City's website is prohibited without the written permission of the City of Fountain Valley. The City of Fountain Valley retains all intellectual property rights including copyrights on all text, graphic images and other content. This means that the following acts or activities are prohibited without prior, written permission from the City of Fountain Valley: 1) modifying and/or re-using text, images or other web content from a City server; 2) distributing the City's web content; or 3) "mirroring" the City's information on a non-City server.
The City of Fountain Valley shall not be held liable for any improper or incorrect use of the materials or information contained on this website and assumes no responsibility for any user's use of them. In no event shall the City of Fountain Valley be liable for any damages, whether direct, indirect, incidental, special, exemplary or consequential (including, but not limited to, business interruption or loss of use, data, or profits) regardless of cause, and on any theory of liability, whether in contract, statute, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this website or the materials and information contained on this website, even if advised of the possibility of such damage. This disclaimer of liability applies to any damages or injury, including but not limited to those caused by any failure of performance, error, omission, interruption, deletion, defect, delay, computer virus, communication line failure, theft, or destruction of data, whether for breach of contract, tortuous behavior, statutory liability negligence, or under any other cause of action. Users are encouraged to consult with appropriate and accredited professional advisors for advice concerning specific matters before making any decision, and the City of Fountain Valley disclaims any responsibility for positions taken by individuals or corporations in their individual cases or for any misunderstanding and losses, directly or indirectly, on the part of any user.
The materials in this website are provided "as is" and without warranties of any kind express or implied. To the fullest extent permissible under applicable law, the City of Fountain Valley disclaims all warranties, expressed or implied, including but not limited to, implied warranties of merchantability, fitness for a particular purpose and title to any of the materials provided on this website. The City of Fountain Valley does not represent or warrant that the functions contained in the materials will be uninterrupted or error-free, that defects will be corrected, or that this website or the server that makes it are free of viruses or other harmful components. The City of Fountain Valley does not warrant or make any representations regarding the use or the results of the use of the materials in this website, or through links to other websites, in terms of their correctness, accuracy, reliability or otherwise. The user (and not the City of Fountain Valley) assumes the entire cost of all necessary servicing, repair, or correction. Changes are made periodically to many city documents, including municipal codes, charter sections, regulations, guidelines, and schedules, and these changes may or may not be reflected in the materials or information present on the City of Fountain Valley's website. Additionally, because the website is frequently under development, materials and information may be deleted, modified or moved to a different part of the website by the city without advance notice.
If you do not agree to all of these terms, please log off of this website immediately. |
One Week Driving Course specialises in providing Intensive Driving Courses with or without a Theory Test included, to clients throughout most of the UK, via a network of driving instructors.
Driving Lessons St Albans, Driving Instructors St Albans.
Here is a small list of some of our driving courses:- 6 hour & 12 hour re-test courses in St Albans, 18 hour crash courses in St Albans, 24 hour intensive driving courses in St Albans, 30 hour driving courses in St Albans, 36 hour one week pass courses in St Albans , 42 hour intensive lesson courses in St Albans, 48 hour pass your test courses in St Albans and our popular guaranteed pass driving course in St Albans. |
The Harlem Wildcat Cross Country team hosted their own Invitational this past Friday as the area teams completed their regular season schedule.
Next up for the Wildcats and the Hays/Lodge Pole Thunderbirds is a trip to Missoula where they will compete in the Montana Class C and Class B Girls and Boys State Cross County Meet.
The State championships are being held at the University of Montana Golf Course this Saturday, October 20. |
/****************************************************************************
**
** Copyright (C) 2012 Nokia Corporation and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/
**
** This file is part of the QtTest module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** GNU Lesser General Public License Usage
** This file may be used under the terms of the GNU Lesser General Public
** License version 2.1 as published by the Free Software Foundation and
** appearing in the file LICENSE.LGPL included in the packaging of this
** file. Please review the following information to ensure the GNU Lesser
** General Public License version 2.1 requirements will be met:
** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights. These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU General
** Public License version 3.0 as published by the Free Software Foundation
** and appearing in the file LICENSE.GPL included in the packaging of this
** file. Please review the following information to ensure the GNU General
** Public License version 3.0 requirements will be met:
** http://www.gnu.org/copyleft/gpl.html.
**
** Other Usage
** Alternatively, this file may be used in accordance with the terms and
** conditions contained in a signed written agreement between you and Nokia.
**
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/
#ifndef QTESTCASE_H
#define QTESTCASE_H
#include <QtTest/qtest_global.h>
#include <QtCore/qnamespace.h>
#include <QtCore/qmetatype.h>
QT_BEGIN_HEADER
QT_BEGIN_NAMESPACE
QT_MODULE(Test)
#define QVERIFY(statement) \
do {\
if (!QTest::qVerify((statement), #statement, "", __FILE__, __LINE__))\
return;\
} while (0)
#define QFAIL(message) \
do {\
QTest::qFail(message, __FILE__, __LINE__);\
return;\
} while (0)
#define QVERIFY2(statement, description) \
do {\
if (statement) {\
if (!QTest::qVerify(true, #statement, (description), __FILE__, __LINE__))\
return;\
} else {\
if (!QTest::qVerify(false, #statement, (description), __FILE__, __LINE__))\
return;\
}\
} while (0)
#define QCOMPARE(actual, expected) \
do {\
if (!QTest::qCompare(actual, expected, #actual, #expected, __FILE__, __LINE__))\
return;\
} while (0)
#define QSKIP(statement, mode) \
do {\
QTest::qSkip(statement, QTest::mode, __FILE__, __LINE__);\
return;\
} while (0)
#define QEXPECT_FAIL(dataIndex, comment, mode)\
do {\
if (!QTest::qExpectFail(dataIndex, comment, QTest::mode, __FILE__, __LINE__))\
return;\
} while (0)
#define QFETCH(type, name)\
type name = *static_cast<type *>(QTest::qData(#name, ::qMetaTypeId<type >()))
#define QFETCH_GLOBAL(type, name)\
type name = *static_cast<type *>(QTest::qGlobalData(#name, ::qMetaTypeId<type >()))
#define DEPENDS_ON(funcName)
#define QTEST(actual, testElement)\
do {\
if (!QTest::qTest(actual, testElement, #actual, #testElement, __FILE__, __LINE__))\
return;\
} while (0)
#define QWARN(msg)\
QTest::qWarn(msg)
class QObject;
class QTestData;
#define QTEST_COMPARE_DECL(KLASS)\
template<> Q_TESTLIB_EXPORT char *toString<KLASS >(const KLASS &);
namespace QTest
{
template <typename T>
inline char *toString(const T &)
{
return 0;
}
Q_TESTLIB_EXPORT char *toHexRepresentation(const char *ba, int length);
Q_TESTLIB_EXPORT char *toString(const char *);
Q_TESTLIB_EXPORT char *toString(const void *);
Q_TESTLIB_EXPORT int qExec(QObject *testObject, int argc = 0, char **argv = 0);
Q_TESTLIB_EXPORT int qExec(QObject *testObject, const QStringList &arguments);
Q_TESTLIB_EXPORT bool qVerify(bool statement, const char *statementStr, const char *description,
const char *file, int line);
Q_TESTLIB_EXPORT void qFail(const char *statementStr, const char *file, int line);
Q_TESTLIB_EXPORT void qSkip(const char *message, SkipMode mode, const char *file, int line);
Q_TESTLIB_EXPORT bool qExpectFail(const char *dataIndex, const char *comment, TestFailMode mode,
const char *file, int line);
Q_TESTLIB_EXPORT void qWarn(const char *message);
Q_TESTLIB_EXPORT void ignoreMessage(QtMsgType type, const char *message);
Q_TESTLIB_EXPORT void *qData(const char *tagName, int typeId);
Q_TESTLIB_EXPORT void *qGlobalData(const char *tagName, int typeId);
Q_TESTLIB_EXPORT void *qElementData(const char *elementName, int metaTypeId);
Q_TESTLIB_EXPORT QObject *testObject();
Q_TESTLIB_EXPORT const char *currentTestFunction();
Q_TESTLIB_EXPORT const char *currentDataTag();
Q_TESTLIB_EXPORT bool currentTestFailed();
Q_TESTLIB_EXPORT Qt::Key asciiToKey(char ascii);
Q_TESTLIB_EXPORT char keyToAscii(Qt::Key key);
Q_TESTLIB_EXPORT bool compare_helper(bool success, const char *msg, const char *file,
int line);
Q_TESTLIB_EXPORT bool compare_helper(bool success, const char *msg, char *val1, char *val2,
const char *expected, const char *actual,
const char *file, int line);
Q_TESTLIB_EXPORT void qSleep(int ms);
Q_TESTLIB_EXPORT void addColumnInternal(int id, const char *name);
template <typename T>
inline void addColumn(const char *name, T * = 0)
{
addColumnInternal(qMetaTypeId<T>(), name);
}
Q_TESTLIB_EXPORT QTestData &newRow(const char *dataTag);
template <typename T>
inline bool qCompare(T const &t1, T const &t2, const char *actual, const char *expected,
const char *file, int line)
{
return (t1 == t2)
? compare_helper(true, "COMPARE()", file, line)
: compare_helper(false, "Compared values are not the same",
toString<T>(t1), toString<T>(t2), actual, expected, file, line);
}
template <>
Q_TESTLIB_EXPORT bool qCompare<float>(float const &t1, float const &t2,
const char *actual, const char *expected, const char *file, int line);
template <>
Q_TESTLIB_EXPORT bool qCompare<double>(double const &t1, double const &t2,
const char *actual, const char *expected, const char *file, int line);
inline bool compare_ptr_helper(const void *t1, const void *t2, const char *actual,
const char *expected, const char *file, int line)
{
return (t1 == t2)
? compare_helper(true, "COMPARE()", file, line)
: compare_helper(false, "Compared pointers are not the same",
toString(t1), toString(t2), actual, expected, file, line);
}
Q_TESTLIB_EXPORT bool compare_string_helper(const char *t1, const char *t2, const char *actual,
const char *expected, const char *file, int line);
#ifndef qdoc
QTEST_COMPARE_DECL(short)
QTEST_COMPARE_DECL(ushort)
QTEST_COMPARE_DECL(int)
QTEST_COMPARE_DECL(uint)
QTEST_COMPARE_DECL(long)
QTEST_COMPARE_DECL(ulong)
QTEST_COMPARE_DECL(qint64)
QTEST_COMPARE_DECL(quint64)
QTEST_COMPARE_DECL(float)
QTEST_COMPARE_DECL(double)
QTEST_COMPARE_DECL(char)
QTEST_COMPARE_DECL(bool)
#endif
#ifndef QTEST_NO_SPECIALIZATIONS
template <typename T1, typename T2>
bool qCompare(T1 const &, T2 const &, const char *, const char *, const char *, int);
#if defined(QT_COORD_TYPE) && (defined(QT_ARCH_ARM) || defined(QT_NO_FPU) || defined(QT_ARCH_WINDOWSCE))
template <>
inline bool qCompare<qreal, float>(qreal const &t1, float const &t2, const char *actual,
const char *expected, const char *file, int line)
{
return qCompare<qreal>(t1, qreal(t2), actual, expected, file, line);
}
template <>
inline bool qCompare<float, qreal>(float const &t1, qreal const &t2, const char *actual,
const char *expected, const char *file, int line)
{
return qCompare<qreal>(qreal(t1), t2, actual, expected, file, line);
}
#elif defined(QT_COORD_TYPE) || defined(QT_ARCH_ARM) || defined(QT_NO_FPU) || defined(QT_ARCH_WINDOWSCE) || defined(QT_ARCH_SYMBIAN)
template <>
inline bool qCompare<qreal, double>(qreal const &t1, double const &t2, const char *actual,
const char *expected, const char *file, int line)
{
return qCompare<float>(float(t1), float(t2), actual, expected, file, line);
}
template <>
inline bool qCompare<double, qreal>(double const &t1, qreal const &t2, const char *actual,
const char *expected, const char *file, int line)
{
return qCompare<float>(float(t1), float(t2), actual, expected, file, line);
}
#endif
template <typename T>
inline bool qCompare(const T *t1, const T *t2, const char *actual, const char *expected,
const char *file, int line)
{
return compare_ptr_helper(t1, t2, actual, expected, file, line);
}
template <typename T>
inline bool qCompare(T *t1, T *t2, const char *actual, const char *expected,
const char *file, int line)
{
return compare_ptr_helper(t1, t2, actual, expected, file, line);
}
template <typename T1, typename T2>
inline bool qCompare(const T1 *t1, const T2 *t2, const char *actual, const char *expected,
const char *file, int line)
{
return compare_ptr_helper(t1, static_cast<const T1 *>(t2), actual, expected, file, line);
}
template <typename T1, typename T2>
inline bool qCompare(T1 *t1, T2 *t2, const char *actual, const char *expected,
const char *file, int line)
{
return compare_ptr_helper(const_cast<const T1 *>(t1),
static_cast<const T1 *>(const_cast<const T2 *>(t2)), actual, expected, file, line);
}
template<>
inline bool qCompare<char>(const char *t1, const char *t2, const char *actual,
const char *expected, const char *file, int line)
{
return compare_string_helper(t1, t2, actual, expected, file, line);
}
template<>
inline bool qCompare<char>(char *t1, char *t2, const char *actual, const char *expected,
const char *file, int line)
{
return compare_string_helper(t1, t2, actual, expected, file, line);
}
#else /* QTEST_NO_SPECIALIZATIONS */
// In Symbian we have QTEST_NO_SPECIALIZATIONS defined, but still float related specialization
// should be used. If QTEST_NO_SPECIALIZATIONS is enabled we get ambiguous overload errors.
#if defined(QT_ARCH_SYMBIAN)
template <typename T1, typename T2>
bool qCompare(T1 const &, T2 const &, const char *, const char *, const char *, int);
template <>
inline bool qCompare<qreal, double>(qreal const &t1, double const &t2, const char *actual,
const char *expected, const char *file, int line)
{
return qCompare<float>(float(t1), float(t2), actual, expected, file, line);
}
template <>
inline bool qCompare<double, qreal>(double const &t1, qreal const &t2, const char *actual,
const char *expected, const char *file, int line)
{
return qCompare<float>(float(t1), float(t2), actual, expected, file, line);
}
#endif
inline bool qCompare(const char *t1, const char *t2, const char *actual,
const char *expected, const char *file, int line)
{
return compare_string_helper(t1, t2, actual, expected, file, line);
}
inline bool qCompare(char *t1, char *t2, const char *actual, const char *expected,
const char *file, int line)
{
return compare_string_helper(t1, t2, actual, expected, file, line);
}
#endif
/* The next two specializations are for MSVC that shows problems with implicit
conversions
*/
#ifndef QTEST_NO_SPECIALIZATIONS
template<>
#endif
inline bool qCompare(char *t1, const char *t2, const char *actual,
const char *expected, const char *file, int line)
{
return compare_string_helper(t1, t2, actual, expected, file, line);
}
#ifndef QTEST_NO_SPECIALIZATIONS
template<>
#endif
inline bool qCompare(const char *t1, char *t2, const char *actual,
const char *expected, const char *file, int line)
{
return compare_string_helper(t1, t2, actual, expected, file, line);
}
// NokiaX86 and RVCT do not like implicitly comparing bool with int
#ifndef QTEST_NO_SPECIALIZATIONS
template <>
#endif
inline bool qCompare(bool const &t1, int const &t2,
const char *actual, const char *expected, const char *file, int line)
{
return qCompare<int>(int(t1), t2, actual, expected, file, line);
}
template <class T>
inline bool qTest(const T& actual, const char *elementName, const char *actualStr,
const char *expected, const char *file, int line)
{
return qCompare(actual, *static_cast<const T *>(QTest::qElementData(elementName,
qMetaTypeId<T>())), actualStr, expected, file, line);
}
}
#undef QTEST_COMPARE_DECL
QT_END_NAMESPACE
QT_END_HEADER
#endif
|
Final part of three posts about the lovely lot of hair and head adornments around at the moment for kids. So pretty!!
no link for this one, sorry, although I do know its from etsy. anyone? |
"""Support for Peewee ORM (https://github.com/coleifer/peewee)."""
from __future__ import annotations
import typing as t
import marshmallow as ma
import muffin
import peewee as pw
from apispec.ext.marshmallow import MarshmallowPlugin
from marshmallow_peewee import ForeignKey, ModelSchema
from muffin.typing import JSONType
from peewee_aio import Manager, Model
from muffin_rest.errors import APIError
from muffin_rest.handler import RESTBase, RESTOptions
from muffin_rest.peewee.filters import PWFilters
from muffin_rest.peewee.openapi import PeeweeOpenAPIMixin
from muffin_rest.peewee.sorting import PWSorting
# XXX: Patch apispec.MarshmallowPlugin to support ForeignKeyField
MarshmallowPlugin.Converter.field_mapping[ForeignKey] = ("integer", None)
class PWRESTOptions(RESTOptions):
"""Support Peewee."""
model: t.Type[pw.Model]
model_pk: t.Optional[pw.Field] = None
manager: Manager
# Base filters class
filters_cls: t.Type[PWFilters] = PWFilters
# Base sorting class
sorting_cls: t.Type[PWSorting] = PWSorting
Schema: t.Type[ModelSchema]
# Schema auto generation params
schema_base: t.Type[ModelSchema] = ModelSchema
# Recursive delete
delete_recursive = False
base_property: str = "model"
def setup(self, cls):
"""Prepare meta options."""
self.name = self.name or self.model._meta.table_name.lower()
self.model_pk = self.model_pk or self.model._meta.primary_key
manager = getattr(self, "manager", getattr(self.model, "_manager", None))
if manager is None:
raise RuntimeError("Peewee-AIO ORM Manager is not available")
self.manager = manager
super().setup(cls)
def setup_schema_meta(self, _):
"""Prepare a schema."""
return type(
"Meta",
(object,),
dict(
{"unknown": self.schema_unknown, "model": self.model},
**self.schema_meta,
),
)
class PWRESTBase(RESTBase):
"""Support Peeweee."""
collection: pw.Query
resource: pw.Model
meta: PWRESTOptions
meta_class: t.Type[PWRESTOptions] = PWRESTOptions
async def prepare_collection(self, _: muffin.Request) -> pw.Query:
"""Initialize Peeewee QuerySet for a binded to the resource model."""
return self.meta.model.select()
async def prepare_resource(self, request: muffin.Request) -> t.Optional[pw.Model]:
"""Load a resource."""
pk = request["path_params"].get(self.meta.name_id)
if not pk:
return None
meta = self.meta
resource = await meta.manager.fetchone(
self.collection.where(meta.model_pk == pk)
)
if resource is None:
raise APIError.NOT_FOUND("Resource not found")
return resource
async def paginate(
self, _: muffin.Request, *, limit: int = 0, offset: int = 0
) -> t.Tuple[pw.Query, int]:
"""Paginate the collection."""
cqs: pw.Select = self.collection.order_by() # type: ignore
if cqs._group_by:
cqs._returning = cqs._group_by
count = await self.meta.manager.count(cqs)
return self.collection.offset(offset).limit(limit), count # type: ignore
async def get(self, request, *, resource=None) -> JSONType:
"""Get resource or collection of resources."""
if resource is not None and resource != "":
return await self.dump(request, resource, many=False)
resources = await self.meta.manager.fetchall(self.collection)
return await self.dump(request, resources, many=True)
async def save(self, _: muffin.Request, resource: pw.Model) -> pw.Model:
"""Save the given resource."""
meta = self.meta
if issubclass(meta.model, Model):
await resource.save()
else:
await meta.manager.save(resource)
return resource
async def remove(self, request: muffin.Request, *, resource: pw.Model = None):
"""Remove the given resource."""
meta = self.meta
if resource:
resources = [resource]
else:
data = await request.data()
if not data:
return
model_pk = t.cast(pw.Field, meta.model_pk)
resources = await meta.manager.fetchall(
self.collection.where(model_pk << data)
)
if not resources:
raise APIError.NOT_FOUND()
delete_instance = meta.manager.delete_instance
if issubclass(meta.model, Model):
delete_instance = lambda m: m.delete_instance(recursive=meta.delete_recursive) # type: ignore # noqa
for res in resources:
await delete_instance(res)
delete = remove # noqa
async def get_schema(
self, request: muffin.Request, resource=None, **_
) -> ma.Schema:
"""Initialize marshmallow schema for serialization/deserialization."""
return self.meta.Schema(
instance=resource,
only=request.url.query.get("schema_only"),
exclude=request.url.query.get("schema_exclude", ()),
)
class PWRESTHandler(PWRESTBase, PeeweeOpenAPIMixin): # type: ignore
"""Support peewee."""
pass
|
Based in Los Angeles and Paris, the main objective of SOMEWHERE IN ART is to promote and sell the French Savoir-Faire in Art and Design. Founded by Stephane Salin in 2015, SOMEWHERE IN ART provides an online gallery for artists to showcase and sell their work, and to help collectors discover innovative projects. The company represents over 40 French artists. The fine arts collection includes painting, photography, sculpture and design. |
// Copyrighttape Technologies LLC.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
extern crate rustc_serialize;
extern crate tempdir;
use std::env;
use std::fs::File;
use std::io::Read;
use std::io::Write;
use std::path::Path;
use std::process::Command;
use std::sync::Arc;
use std::time::UNIX_EPOCH;
use self::rustc_serialize::hex::FromHex;
use self::tempdir::TempDir;
use crate::libexecutor::block::{BlockBody, ClosedBlock, OpenBlock};
use crate::libexecutor::command;
use crate::libexecutor::executor::Executor;
use crate::types::header::OpenHeader;
use crate::types::transaction::SignedTransaction;
use cita_crypto::PrivKey;
use cita_types::traits::LowerHex;
use cita_types::{Address, U256};
use cita_vm::{state::MemoryDB, state::State};
use crossbeam_channel::{Receiver, Sender};
use libproto::blockchain;
use util::AsMillis;
const SCRIPTS_DIR: &str = "../../scripts";
pub fn get_temp_state() -> State<MemoryDB> {
let db = Arc::new(MemoryDB::new(false));
State::new(db).unwrap()
}
pub fn solc(name: &str, source: &str) -> (Vec<u8>, Vec<u8>) {
// input and output of solc command
let output_dir = TempDir::new("solc_output").unwrap().into_path();
let contract_file = output_dir.join("contract.sol");
let deploy_code_file = output_dir.join([name, ".bin"].join(""));
let runtime_code_file = output_dir.join([name, ".bin-runtime"].join(""));
// prepare contract file
let mut file = File::create(contract_file.clone()).unwrap();
let mut content = String::new();
file.write_all(source.as_ref()).expect("failed to write");
// execute solc command
Command::new("solc")
.arg(contract_file.clone())
.arg("--bin")
.arg("--bin-runtime")
.arg("-o")
.arg(output_dir)
.output()
.expect("failed to execute solc");
// read deploy code
File::open(deploy_code_file)
.expect("failed to open deploy code file!")
.read_to_string(&mut content)
.expect("failed to read binary");
let deploy_code = content.as_str().from_hex().unwrap();
// read runtime code
let mut content = String::new();
File::open(runtime_code_file)
.expect("failed to open deploy code file!")
.read_to_string(&mut content)
.expect("failed to read binary");
let runtime_code = content.from_hex().unwrap();
(deploy_code, runtime_code)
}
pub fn init_executor() -> Executor {
let (_fsm_req_sender, fsm_req_receiver) = crossbeam_channel::unbounded();
let (fsm_resp_sender, _fsm_resp_receiver) = crossbeam_channel::unbounded();
let (_command_req_sender, command_req_receiver) = crossbeam_channel::bounded(0);
let (command_resp_sender, _command_resp_receiver) = crossbeam_channel::bounded(0);
init_executor2(
fsm_req_receiver,
fsm_resp_sender,
command_req_receiver,
command_resp_sender,
)
}
pub fn init_executor2(
fsm_req_receiver: Receiver<OpenBlock>,
fsm_resp_sender: Sender<ClosedBlock>,
command_req_receiver: Receiver<command::Command>,
command_resp_sender: Sender<command::CommandResp>,
) -> Executor {
// FIXME temp dir should be removed automatically, but at present it is not
let tempdir = TempDir::new("init_executor").unwrap().into_path();
let genesis_path = Path::new(SCRIPTS_DIR).join("config_tool/genesis/genesis.json");
let mut data_path = tempdir.clone();
data_path.push("data");
env::set_var("DATA_PATH", data_path);
let executor = Executor::init(
genesis_path.to_str().unwrap(),
tempdir.to_str().unwrap().to_string(),
fsm_req_receiver,
fsm_resp_sender,
command_req_receiver,
command_resp_sender,
false,
);
executor
}
pub fn create_block(
executor: &Executor,
to: Address,
data: &Vec<u8>,
nonce: (u32, u32),
privkey: &PrivKey,
) -> OpenBlock {
let mut block = OpenBlock::default();
block.set_parent_hash(executor.get_current_hash());
block.set_timestamp(AsMillis::as_millis(&UNIX_EPOCH.elapsed().unwrap()));
block.set_number(executor.get_current_height() + 1);
// header.proof= ?;
let mut body = BlockBody::default();
let mut txs = Vec::new();
for i in nonce.0..nonce.1 {
let mut tx = blockchain::Transaction::new();
if to == Address::from(0) {
tx.set_to(String::from(""));
} else {
tx.set_to(to.lower_hex());
}
tx.set_nonce(U256::from(i).lower_hex());
tx.set_data(data.clone());
tx.set_valid_until_block(100);
tx.set_quota(1844674);
let stx = tx.sign(*privkey);
let new_tx = SignedTransaction::create(&stx).unwrap();
txs.push(new_tx);
}
body.set_transactions(txs);
block.set_body(body);
block
}
pub fn generate_contract() -> Vec<u8> {
let source = r#"
pragma solidity ^0.4.8;
contract ConstructSol {
uint a;
event LogCreate(address contractAddr);
event A(uint);
function ConstructSol(){
LogCreate(this);
}
function set(uint _a) {
a = _a;
A(a);
}
function get() returns (uint) {
return a;
}
}
"#;
let (data, _) = solc("ConstructSol", source);
data
}
pub fn generate_block_header() -> OpenHeader {
OpenHeader::default()
}
pub fn generate_block_body() -> BlockBody {
let mut stx = SignedTransaction::default();
stx.data = vec![1; 200];
let transactions = vec![stx; 200];
BlockBody { transactions }
}
pub fn generate_default_block() -> OpenBlock {
let block_body = generate_block_body();
let block_header = generate_block_header();
OpenBlock {
body: block_body,
header: block_header,
}
}
|
<?php
/*
* You may not change or alter any portion of this comment or credits
* of supporting developers from this source code or any supporting source code
* which is considered copyrighted (c) material of the original comment or credit authors.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*/
/**
* @copyright The XOOPS Project http://sourceforge.net/projects/xoops/
* @license GNU GPL 2 or later (http://www.gnu.org/licenses/gpl-2.0.html)
* @package
* @since
* @author XOOPS Development Team
* @version $Id $
*/
require_once dirname(dirname(dirname(dirname(__FILE__)))) . '/include/cp_header.php';
include_once dirname(__FILE__) . '/admin_header.php';
include_once dirname(dirname(__FILE__)) . '/include/directorychecker.php';
xoops_cp_header();
$indexAdmin = new ModuleAdmin();
//-----------------------
/*
* jobs
* validate
* published
* total jobs
* Categories
* resumes
* validate
* published
* total jobs
* Categories
* payment type
* job type
*
* Companies
*
* */
$summary = jobs_summary();
$indexAdmin->addInfoBox(_AM_JOBS_SUMMARY);
//$indexAdmin->addInfoBoxLine(_AM_JOBS_SUMMARY, "------ JOBS -----------------", 'Red');
$indexAdmin->addInfoBoxLine(_AM_JOBS_SUMMARY, sprintf(_AM_JOBS_WAITVA_JOB,$summary['waitJobValidation']), 'Green');
$indexAdmin->addInfoBoxLine(_AM_JOBS_SUMMARY, sprintf(_AM_JOBS_PUBLISHED, $summary['jobPublished']), 'Red');
$indexAdmin->addInfoBoxLine(_AM_JOBS_SUMMARY, sprintf(_AM_JOBS_CATETOT, $summary['jobCategoryCount']), 'Green');
//$indexAdmin->addInfoBoxLine(_AM_JOBS_SUMMARY, "</br> "."------ RESUMES -----------------", 'Red');
$indexAdmin->addInfoBoxLine(_AM_JOBS_SUMMARY, "</br> ".sprintf(_AM_JOBS_WAITVA_RESUME,$summary['waitResumeValidation']), 'Green');
//$indexAdmin->addInfoBoxLine(_AM_JOBS_SUMMARY, "<b>"._AM_JOBS_VIEWSCAP ."</b> ". sprintf(_AM_JOBS_VIEWS, $summary['views']), 'Green');
$indexAdmin->addInfoBoxLine(_AM_JOBS_SUMMARY, sprintf(_AM_JOBS_RESUME_PUBLISHED, $summary['resumePublished']), 'Green');
$indexAdmin->addInfoBoxLine(_AM_JOBS_SUMMARY, sprintf(_AM_JOBS_RESUME_CAT_TOTAL, $summary['resumeCategoryCount']), 'Green');
//$indexAdmin->addInfoBoxLine(_AM_JOBS_SUMMARY, "</br> "."------ COMPANIES -----------------", 'Red');
//$indexAdmin->addInfoBoxLine(_AM_JOBS_SUMMARY, "</br> "."<b>"._AM_JOBS_COMPANY_TOTCAP ."</b> ". sprintf(_AM_JOBS_WAITVA_RESUME,$summary['waitResumeValidation']), 'Green');
$indexAdmin->addInfoBoxLine(_AM_JOBS_SUMMARY, "</br> ".sprintf(_AM_JOBS_COMPANY_TOT, $summary['companies']), 'Green');
$photodir = XOOPS_ROOT_PATH . "/modules/" . $xoopsModule->getVar('dirname') . "/photo";
$photothumbdir = XOOPS_ROOT_PATH . "/modules/" . $xoopsModule->getVar('dirname') . "/photo/thumbs";
$photohighdir = XOOPS_ROOT_PATH . "/modules/" . $xoopsModule->getVar('dirname') . "/photo/midsize";
$cachedir = XOOPS_ROOT_PATH . "/modules/" . $xoopsModule->getVar('dirname') . "/resumes";
$tmpdir = XOOPS_ROOT_PATH . "/modules/" . $xoopsModule->getVar('dirname') . "/rphoto";
//------ check directories ---------------
$indexAdmin->addConfigBoxLine('');
$redirectFile = $_SERVER['PHP_SELF'];
$languageConstants = array(_AM_JOBS_AVAILABLE,_AM_JOBS_NOTAVAILABLE, _AM_JOBS_CREATETHEDIR, _AM_JOBS_NOTWRITABLE, _AM_JOBS_SETMPERM, _AM_JOBS_DIRCREATED,_AM_JOBS_DIRNOTCREATED,_AM_JOBS_PERMSET,_AM_JOBS_PERMNOTSET);
$path = $photodir ;
$indexAdmin->addConfigBoxLine(DirectoryChecker::getDirectoryStatus($path,0777,$languageConstants,$redirectFile));
$path = $photothumbdir;
$indexAdmin->addConfigBoxLine(DirectoryChecker::getDirectoryStatus($path,0777,$languageConstants,$redirectFile));
$path = $photohighdir;
$indexAdmin->addConfigBoxLine(DirectoryChecker::getDirectoryStatus($path,0777,$languageConstants,$redirectFile));
$path = $cachedir;
$indexAdmin->addConfigBoxLine(DirectoryChecker::getDirectoryStatus($path,0777,$languageConstants,$redirectFile));
$path = $tmpdir;
$indexAdmin->addConfigBoxLine(DirectoryChecker::getDirectoryStatus($path,0777,$languageConstants,$redirectFile));
//---------------------------
echo $indexAdmin->addNavigation('index.php');
echo $indexAdmin->renderIndex();
jobs_filechecks();
include 'admin_footer.php';
|
The work Airs suisses : avec accompagnement de piano ou guitarre | Schweizerlieder mit begleitung des piano oder guitarre. No. 18 represents a distinct intellectual or artistic creation found in Brigham Young University. This resource is a combination of several types including: Work, Language Material, Notated Music, Music. |
Gabe Newell has a vision for Steam, and he can’t shake it.
Steam has already changed the way PC gamers look at games, almost completely eradicating physical media from the western PC games market. Of course, we still have draconian data transfer caps in India, so we haven’t yet been able to fully realise the benefits of Steam. But where it is viable, it rules unmatched. Now Valve is looking to capture the console market, with it’s ‘Steam Box’ offerings that can be plugged into TVs, much like your regular consoles.
But how will that change the platform itself? Valve’s head honcho, Gabe Newell, has some ideas. During a recent talk given at the University of Texas, he outlined Steam’s direction in the coming years.
There’s so much content coming at us that we just don’t have enough time to turn the crank on the production process of getting something up on Steam. […] we’re creating artificial shelf space scarcity. […] So Steam should stop being a curated process and start becoming a networking API.
Which is an interesting position to take, as much of Steam’s popularity comes from it’s reputation as the be-all and end-all of PC gaming. As it stands, if your game makes it on Steam, you’ve made it. You’ve reached the pinnacle of PC gaming, and can call yourself an ‘indie developer’ without looking like an idiot. And reputation is very, very important to brand value. As much as I love the Play Store’s open nature, it does lead to a lot of low-quality, dud applications; even the odd malware gets in. Steam can’t afford that. How will this work? Only time – and Gabe – can tell.
Another piece of Steam is the store. The store is… I don’t know about you, but I think the store is really boring. It’s like this super middle-ground marketing thing. Like, oh, here’s a list of features in our game.The stores instead should become user-generated content.
Other companies can take advantage of this as well, but if a user can create his own store — essentially add an editorial perspective and content on top of the purchase process… then we’ve created a mechanism where everybody, in the same way we’ve seen a huge upsurge of user-generated content with hats, we think that there’s a lot of aggregate value that can be created by allowing people to create stores.
He wants to create a marketplace where you can put up the details for games. Right now, you open up Steam, you go to a game’s page, where the features are listed by the publisher, and decide if you want to buy it. With Gabe’s idea, you can create your own store. You can create your own feature lists for games, upload your screenshots, take your own videos. Obviously no one’s going to care if you’re a nobody, but for famous reviewers like Yahtzee and TotalBiscuit? I’d trust their word over the publishers’ any day.
Of course, I can’t see the publishers being too happy with this. It can’t be completely open, or it would face the wrath of Metacritic’s user reviewers, who mindlessly rate any game they hate a 1⁄10. But Valve, and Steam, have incredible influence in the gaming industry right now. And if anyone could do it, it’s them.
Greenlight has been controversial, to say the least. The feature sounds good enough – users upload their games, people vote for them, maximum votes gets in on the Steam pie. But there was a tiny little problem that Valve certainly should have foreseen – fake and troll games. Half finished, unpolished games being voted for, through money or influence. Games which don’t, and are never intended to exist, being on Steam. Valve’s knee-jerk reaction was to increase the entry fee to $100, and it somewhat worked. But there was still crapware like Towns on the Steam store, which can’t be acceptable.
Therefore, Gabe wants to do away with Greenlight. And somehow, make an even more open platform.
It’s probably bad for the Steam community, in the long run, not to move to a different way of thinking about that. In other words, we should stop being a dictator and move towards much more participatory, peer-based methods of sanctioning player behavior.
I personally have no idea how this could work. Greenlight is somewhat of a mess as it stands, and people being able to upload any games without sanction just seems too open to exploitation. But again, if anyone knows what they’re doing, it’s Valve.
These are certainly not features you can expect tomorrow, but a general idea of the direction Valve is taking Steam in. It may seem a little far fetched, but try going back to 1999 and explaining the concept of an online-only gaming store. Change will come, and I’d rather Valve herald it in than anyone else. |
The Spidi Thunderbird Leather Motorcycle Gloves are part of the latest Spidi collection.
The Thunderbird by Spidi is a short motorcycle glove, tailored with fine goat (palm) and deer (back) skins and featuring a classic design that fits perfectly with vintage bikes and cafe racers. This combination of leathers is instrumental in providing ultimate comfort and perfect grip.
View all Spidi Motorcycle Gloves. View all Cruiser Motorcycle Gloves. |
X220 - Wifi switches itself off after about a minute?!?!
Hi all, have a strange problem laptop works perfectly ok, but when i need to connect to wi-fi i switch it on and connect no problems but literelly after a minute the wi-fi switches itself off and the green wi-fi light goes out and i have to do fn+f5 to switch it back on?? is it faulty?? tried system update (and installed all, which i noticed there was a network card update)...any other tricks?
Re: X220 - Wifi switches itself off after about a minute?!?!
Try uninstalling the software, rebooting, then reinstalling. Is your BIOS up to date? |
Description: We offer freshwater pearl jewelry - pearl necklace, pearl earrings, pearl bracelet, pearl pendant, pearl ring, pearl jewelry set.
Description: Welcome to wholesale pearl jewelry center - www.onepearls.com offer freshwater pearl, akoya pearl, cultured pearl, coral jewelry, turquoise jewelry, shell pearl, wish pearl.
Description: We are a pearl jewelry wholesale online store from China. Specialize in wish pearl, akoya pearl, freshwater pearl, shell pearl, sterling silver jewelry.
We offer freshwater pearl jewelry - pearl necklace, pearl earrings, pearl bracelet, pearl pendant, pearl ring, pearl jewelry set.
Wholesale pearl jewelry - Lpearls.com offer good pearl necklaces, pearl bracelets, pearl earrings, pearl pendants, pearl rings and wedding jewelry.
Online wholesale wish pearl from necpearl.com - mainly provide wish pearl, pearl oyster, oyster gift, akoya pearl oyster, freshwater wish pearl, pearl in oyser, pearl in shell, pearl in can.
We supply you high quality freshwater pearl jewelry wholesale with fancy design pearl necklace, pearl bracelet, pearl earrings, pearl pendant, pearl ring and wish pearl. Also wholesale coral jewelry, turquoise jewelry, shell jewelry, shell pearl and so on.
LG pearl jewelry wholesale online store is professional in pearl jewelry products such as freshwater pearl, pearl necklace, pearl earrings. Enjoy your shopping!
Welcome to our Good Pearl Jewelry online wholesale pearl jewelry store, a pearl jewelry supplier which is specialized in export high quality and finest craft freshwater pearl jewelry, cultured pearl jewelry, akoya pearl, shell jewelry, shell pearl, coral jewelry, turquoise jewelry.
China sterling silver jewelry wholesale store specialized in wholesale sterling silver jewelry includingsilver pearl jewelry, jewelry fittings, sterling silver necklace, jewelry clasps, silver pearl necklace, sterling silver earrings and sterling silver bracelet.
Our fpearls company is a well-known pearl jewelry wholesaler from China, we specialize in various kinds of jewelries, including necklace, bracelet, earrings, ring, pendant, brooch and set.
We directly wholesale high quality pearl jewelry of pearl necklace , earrings, pearl bracelet, pendants and rings made of freshwater pearl , akoya pearls, shell, shell pearls, coral, turquoise, abd other gemstones.
Vpearls company is one of world class jewelry company which has a lot of jewelries with newest style and highest quality. And we are proud to supply you with the most fashionable pearl necklace, pearl bracelet, pearl earrings, pearl pendant, pearl ring, pearl brooches and pearl sets.
wholesale-pearl-jewelry.com is a wholesale pearl jewelry online store in China, we offer the freshwater pearl necklace, freshwater pearl earrings, pearl bracelet, pendant and rings.
We are the leader in inflatable products dedicated to providing you with good quality inflatables, and sell good price. |