query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
i want to know if this could be connected to a dvd player and used for outside entertainment, if I bought a screen? | Yes but I wouldn't recommend. It started messing up on me after a week and two to three weeks later it wouldn't work at all. I returned it and replaced with the VVME - V07. Only $12 more, way better picture quality ( very nice picture when I was just projecting on a wall in my bedroom) , haven't had a single issue with it, its also LED, and has more HDMI inputs. Only down side is its a bit larger-normal projector size. |
i want to know if this could be connected to a dvd player and used for outside entertainment, if I bought a screen? | Dunskis: the answer to your question is yes! This projector has an hdmi port and Pb/Cb connection. Most modern DVD players have both or either of these connections to match. You will want to purchase a separate audio system, though! The built in speaker in the projector is worthless, especially for outdoors. Keep in mind this project is not weather proof, though, so it will need to be stored inside. Good luck! -stefan |
During set up, the volume was loud. But since then, it won't play loudly at all. Any ideas? | Normally the volume is regulated through the device that is hooked up to the speaker as there is no volume control button on the speaker. I would suggest to check the volume from the device. |
During set up, the volume was loud. But since then, it won't play loudly at all. Any ideas? | during set up, how was the volume set in your computer/pad/phone? i control the volume in my setup, from my iPad. i believe that i too had that issue, and my son enlightened me. i may also have incorrectly set up the blue tooth. certainly glad my son is patient... because i have only been retired from being a computer programmer for over 30 years, would have hoped that i would have been able to set up a small speaker on my own! |
How easy is it to print on printable CD/DVDs with this printer? | To get from the paper tray to the printer heads and out of the printer, the medium to be printed has to make a hairpin turn of maybe 1-2 inches radius. Regular copier paper has no problem with that, but the occasional adhesive CD/DVD label just might come loose from its backing, really gumming up the works. This applies to adhesive labels generally. I couldn't in good conscience recommend using this model for such an application. |
How easy is it to print on printable CD/DVDs with this printer? | I had no problem. Found it rather easy. Just use the printable DVDs---not labels. |
How easy is it to print on printable CD/DVDs with this printer? | in the beginning i had changeless i had to upgrade the software and firmware then i was able to print directly to disc. now i just love it. |
How easy is it to print on printable CD/DVDs with this printer? | If you have printed photos on a printer, it is basically similar. I found it to be fairly simple. |
How easy is it to print on printable CD/DVDs with this printer? | The actual printing is fine, and the printer is very efficient on ink. We use the printer only for DVD printing. The great challenge is with the software that comes with it for the DVD printing. The software is not very easy to use, is extremely slow and is also not very efficient in operation. We use it to print on DVDs for our photography business and print up to 40-50 DVDs a month. Each time I want to change the DVD design I have to slowly reload images to a folder (but not too many at one time) and then slowly place them into a layout/design. There are no options to make pictures smaller, which is a big inconvenience for us, but you can make them larger which does help. The software runs out of memory to print sometimes too (but not computer memory, as I'm on a fast 10gb memory 3.4ghz processor) and will not allow it to print. A software restart is required then, which only sometimes solves the problem. Basically, software is terrible and very outdated, but the print quality itself is rather wonderful. Putting the DVD on the tray is rather easy too once you're used to it. We use 'off-brand' ink which works well, in case it helps. |
For the product to work, does it have to be plugged in to a power source? | No it functions fine without it BUT if your device requires allot of power like a passport hard drive you will be required to hook up power. Most devices like Flash drives, mice, keyboards, Ect don't |
For the product to work, does it have to be plugged in to a power source? | No. Works without the power in my windows 8 asus tablet. The best of this cable is connect USB devices while charging. My tablet has only one usb that is for connect and charging.The cable is also important when conecting devices that uses a lot of power. |
What is the shelf life of this product? | To be honest, I take 5 per day and no need to check it! (smile) Usually 2 years tho according to the bottles. |
What is the shelf life of this product? | Hi,The expiration date on most of the Garden of Life products is 2017 or 2018. Thanks |
What is the shelf life of this product? | I presume 3 to 6 months. It's living cells, so I keep mine in the fridge and take about 30 days to use it. The quicker you use it the better. |
Will it survive shipping to Iowa in the winter? | I have it in a unheated greenhouse in southern Mo. So far OK but I keep some in an aquarium inside in case |
Will it survive shipping to Iowa in the winter? | Yes I think so. I put mine in a tote with a pump just to circulate the water to feed my fish it lasted most of the summer. |
Will it survive shipping to Iowa in the winter? | Hello there! I am not a seller, I purchased this product a while ago from this supplier. I do not know what state this supplier is located at; however, my order arrived in perfect condition with 3 day shipping /delivery I believe. It is well packaged that has enough moister for plant to survive without water. |
Can you sharpen Japanese knives on it? | No the angle is wrong for Japanese knives. He should look for sharpeners that specify for Japanese knives.Good Luck! |
New to this, what's the bowl for? (I'm a woman) | To froth the soap/shave cream. But the plastic container the soap comes in works better |
New to this, what's the bowl for? (I'm a woman) | Every man has his own peculiarities, but the bowl is usually where you build a lather. The soap puck is typically kept in the bowl, and the brush, with a bit of water, whips lather in bowl. Some men like to "face lather" rather than bowl (or mug), especially with creams. There are some YouTube vids if you search for wet shaving, double edge, etc. Art of Manliness is also a good site.Nick is right, with this set you can just use the soap in its plastic tub, though future "refill" soaps might not have a tub (I just bought a Harris refill, for example). |
New to this, what's the bowl for? (I'm a woman) | I used to use this kind of product, 20 years ago, and would add olive oil to the soap each time. Made my legs so soft! Now I want to start using the mug and brush again and don't know where to start! |
New to this, what's the bowl for? (I'm a woman) | Miss Belle, I suggest that you go to a store and get a cheap large (3 cup) coffee mug for your soap. This bowl does not have a handle and it makes holding onto it difficult while shaving. I still have my bowl that came with this set, but I have a wash cloth at the bottom of it and it is what my wet blade and razor goes into to dry. |
New to this, what's the bowl for? (I'm a woman) | You place the soap in it with a little water and whip a lather with the brush. |
Hello, would you tell me if this can be put on the wall like a tv screen? Also, someone mentioned there is no HDMI, so it cannot be used as additional screen. Is this correct? | Correct, no HDMI. Also it doesn't make mention if this can be hung onto a wall. |
Hello, would you tell me if this can be put on the wall like a tv screen? Also, someone mentioned there is no HDMI, so it cannot be used as additional screen. Is this correct? | I don't see how u could mount it. Which would mean you couldn't use touch screen. No there is no DMI input |
What are the dimensions in inches?? | a12051500ux0237 Bag Size (Unfolded) 20.5 x 13.5 x 14cm / 8.1" x 5.3" x 5.5"(L*W*H)Mirror Size 5 x 5cm / 2" x 2" (L*W)Strap Size 11 x 2cm/4.3" x 0.8"(L*W) |
What are the dimensions in inches?? | I dont know but I have put 4 3oz bottles in it and it is almost full so I would say it doesnt hold much it is way too small |
What are the dimensions in inches?? | this is just an estimate I will say probably 6 or 7 inches high and maybe the same in length |
does this Tv convert RCA to HDMI signals | i have no idea what you mean. if you mean from some sort of video feed i`m sure it does. picture is outstanding & i am well pleased with the product |
does this Tv convert RCA to HDMI signals | Honestly, I don't know. BUT I wouldn't be surprised if it didn't. This TV is SUPER basic. Nothing special about it. |
does it have lactose in it | I am not certain. It does contain lactic acid. Go to www.vsl3.com for more info |
does it have lactose in it | The first ingredient is Lactic acid bacteria. According to the label it contains 112.5 billion live lactic acid bacteria per capsule. |
does it have lactose in it | It has 8 strains of live freeze dried lactic acid bacteria. These are: Streptococus thermophilus; bifidobaterium breve; bifidobacterium longum; bifidobacertium infantis; lactobacillus acidophilus; lactobacilulus plantarum, lactobacillus paracasei, and lactobacillus delbrueckii subsp. buaricus. VSL#3 products may contain trace amounts of lactose [0.1g per 100g] and dehydrated skim milk or milk protein (casein and beta-lacto globulin of less than 2mg/Kg). |
does it have lactose in it | It has live bacteria in it & it does list lactic acid bacteria. But be careful ordering it over the Internet. Make sure you are home for delivery since it does need to be refrigerated. My G.I stared me on it for my IBS. It has helped me out big time. |
does it have lactose in it | I don't know I looked on the label but it didn't have anything about lactose. Sorry! |
Does it work with a Samsung Galaxy Note 3? | I'm so sorry I can't answer you because I am using my Samsung with an Iphone and IpodBut I truly recommend this dock is awesome |
Does it work with a Samsung Galaxy Note 3? | Is the micro USB port on the bottom of the phone? If so, it should work fine to charge the phone. Music playback will work fine since it uses bluetooth. |
Does it work with a Samsung Galaxy Note 3? | I'm sure it will play music through the bluetooth and via the auxiliary line. It won't dock because the charging port on the bottom of the note 3 isn't the same as the note 2 or any other Samsung smartphone. |
Does it work with a Samsung Galaxy Note 3? | The charging port for Samsung phones is built in the unit but, because the unit curves I'm not sure if your phone would be too big to be back far enough to use it. The Note 3 has the same charging port as other Samsung phones. |
does it work with Windows 8? | Hi, Yes. It should work with Windows 8 OS using the software version 1.4.5.0 that was released last March 27, 2013. You may download it from this link: http://support.linksys.com/en-us/support/powerline/PLSK400 then select the Download tab and select Hardware version 1. Thanks, Linksys Support http://support.linksys.com |
does it work with Windows 8? | Hi, Yes. It should work with Windows 8 OS using the software version 1.4.5.0 that was released last March 27, 2013. You may download it from this link: http://support.linksys.com/en-us/support/powerline/PLSK400 then select the Download tab and select Hardware version 1.Thanks,Linksys Supporthttp://support.linksys.com |
does it work with Windows 8? | To the best of my knowledge, there should be no issues using this unit with Windows 8. |
Would this securely hold a 10 inch tablet? | Bag has ties on each bottom right and left, none on the top. Has velcro closers on top. Top has flap on top to hook onto top of walker. Depth is about 10 inches but velco tab mayprevent tablet covering the top tap. Is secure, also has 3 outside pockets for like phone or id or cards. |
Can you wash these clothes and if yes how often? | Really I don't know because I don't try wash but the company tell us instructions :1- Hand wash only in warm water. No Detergent2- Air dry only.And welcome :) |
Can you wash these clothes and if yes how often? | Something that is just important as cleaning these after extended use...is to avoid getting oils and dust from hands and the house--if you plan using these cloths on camera lenses. Otherwise, you're just moving dirt from your hands onto the lens and never getting it clean. |
how many times can this tank fill up a benjamin marauder .25 ??? | I dont know exactly but ive had my hatsan bt65 .25 for almost a year and im on same fill |
what color is the got the blues for red? | got the blues for red is a dark red, with bluish (not pink, orange, or brown) undertones -- i landed on this page randomly and saw your question and, since i am wearing 'blues for red' right now, wanted to describe/recommend... it is beautiful. no sparkles/no pearly-frosty situation, just a wine-dark red. |
Is this emitter required and/or work with Mitsubishi WD-73833? Also what type of glasses would work? | Works great with the Mitsubishi tv and we used the Xpand 3D Multibrand IR 3d Glasses single 1 pack (Discontinued by Manufacturer) |
Is this emitter required and/or work with Mitsubishi WD-73833? Also what type of glasses would work? | Its not required for the tv. The tv actually has its own internal 3D emitter. It takes special glasses that required batteries to run the glasses. My problem is that I want to sit further back from the tv and the internal emitter is not very strong so I lose the 3D signal to the wireless glasses that I use. I have had several types of glasses work. I bought this in hopes that a pair of infrared glasses that were Samsung brand would work. The tv has a plug in the back that works with these external emitters. Although I haven't ever had the correct glasses to work with this emitter the company that makes this emitter can tell you what type of glasses to purchase. Remember not all active shutter glasses are the same. Not all active shutter glasses are compatible. Also the glasses you get from the movie theatre will not work with tv. No the glasses do not need to be Mitsubishi brand. My apologies for not being able to fully answer your question. I did contact the company who made the emitter and the did tell me the type of glasses that work but I didn't buy any at the time and it has been a long time since so I don't remember but they were helpful in that way so I would strongly suggest you call them for specifics on which types to purchase. (P.s. The Samsung glasses I bought were infrared and they didn't work with this. The tv itself does not output an infrared signal) |
Is this emitter required and/or work with Mitsubishi WD-73833? Also what type of glasses would work? | It is not required. This thing is garbage.... it never worked or worked better than the built in 3d. Normally k n 3d tvs you can make any channel 3d. In this tvs case, you cannot. I would suggest passing on this device. |
Is this formula gluten free? | Says right on the box that it's Gluten Free - no sugar, yeast, wheat, dairy or artificial flavors/colors or preservatives. |
Is this formula gluten free? | http://www.vitacost.com/natures-way-alive-calcium-bone-formula-120-tabletsYes...it is gluten free. Attached are the ingredients. |
Is this formula gluten free? | Yes, the bottle states that it is GLUTEN FREE. It contains NO sugar, yeast, wheat, dairy products, artificial flavors/colors, or preservatives. Hope that helps. |
Does this work with 64 Bit? | It does not on my 64 bit Hackintosh. . .sends out a loud squealing noise. . . . but that may be a whole different animal. |
Does this work with 64 Bit? | Yes. I'm using it on Arch Linux 64 bit and Windows 7 64 bit, and it works fine with both. It supports the latest Nvidia drivers still, which is nice. |
does it have a light button? | No light button, but sure don't think it needs one. I am very happy with mine. |
Can I mount this camera on the ceiling? Thank you | I couldn't get mine to work, so I never mounted it, but I don't think you can ceiling mount with the one provided. |
Can I mount this camera on the ceiling? Thank you | Yes I used a block of would painted of course to mount it to overhang on my garage. When you figure out all of its functions like I did this camera is excellent. I installed 32 g SD card it captures all |
Can I mount this camera on the ceiling? Thank you | Yes it supports flipping and mirroring in setup. The mounting kit will handle it as well. |
Is there a replacement remote control for Sunny Health & Fitness Mini Crazy Fit Bio Shaker? | Do you mean does it come with two? No, sorry. For a replacement, you'd need to try to contact the maker. |
Is this wireless capable? | This has an Ethernet port which can be connected to a wireless adapter. The unit does not have built in WiFi. |
Is this wireless capable? | Regular Lan adaptor won't work. You have to buy one from Samsung, and it costs more that the blu Ray player. Like Sony stuff...it's propriatory! |
Does this come with a holster or do i need to buy it? | Comes with one. Not as sturdy as the tool. Made of polymer and prone to breaking. |
Does this come with a holster or do i need to buy it? | Yes it does. This is a great item and you will not be disappointed. Money very well spent. |
voltage? Hello I would like to know if the charger can be used with 220Voltage?? | I would say NO!!! Could damage charger and possable damage to yourself. Contact Black and Decker for help. |
Is the only way to mount this by making holes in the cars exterior? | Velcro will allow too much vibration, the camera will shake. 2 issues with that, the picture will be fuzzy and the camera components might have a shorter lifespan. |
Is the only way to mount this by making holes in the cars exterior? | I used the double sided tape that came with the unit. it's been two full years and I can yank hard on the bracket with no signs of give. Just clean the surface of the vehicle where you want to install it and press it on. I did have to drill a 1/2" hole to get the wire inside the trunk. I drilled hole near the license plate illumination lights which is not visible. I applied touchup paint to the hole so there was not any exposed metal and installed the wire with the included grommet. |
Is the only way to mount this by making holes in the cars exterior? | In my car i monut this camera in the back door. In the handlebar. Response very well and support the rain, the water and the dust. |
Is the only way to mount this by making holes in the cars exterior? | I used 3m High Bond double sided tape and it has been on for a long time. No problems. Make sure you use the HB tape. It is a little expensive, but has a lot of uses. A good investment for the house or the car. |
Is the only way to mount this by making holes in the cars exterior? | I have mine mounted under the bumper using 3M double sided tape. You will have to tie into the reverse power wire (Hot 12V when the car is in reverse) and you will have to run the video wire to the back of your stereo unit. There is usually a grommet or other access point where you can go from outside to inside the vehicle that looks like a round or oval black plug. Many times they can be found in the bottom door kick panel (step) under the plastic cover. |
Is the only way to mount this by making holes in the cars exterior? | It comes with double sided tape, but I don't think that will be a good long term solution I used that to test the location I wanted to go with. I have it mounted above the license plate on a truck bumper I used screws on some plastic trim that was above the license plate holder on the bumper. You could get a license plate frame and mount the camera to that to avoid any vehicle modification. You will have to run the wiring back into the interior of the vehicle but I was able to find and use and existing wiring pas through. |
How many watts it consume? | I'm not positive on the watts, but I know that when our power went out I could run the hair dryer on the generator, but I couldn't run the flat iron...it needed too much power, so it consumes a lot of energy, but it does heat up hotter than most, it goes up to 455 degrees.....hope this helps... |
Will this fit on a Ruger 223 rancher? | That depends on the type of stock you have. If you have the original wood stock then no it wont fit. But if you have the composite stock with a pickatinny rail on the under side then yes it would work. The attachment that comes with the bipod only works if you have a swivel stud on the forehand part of your rifle. Also keep in mind I have this on my AR and I have to use 20 round mags or smaller in order to use it due to the limited height of the legs. |
Will this fit on a Ruger 223 rancher? | It will....however, you will only be able to use 20 round mags....anything more and you will be lop-sided |
Will this fit on a Ruger 223 rancher? | only if you have a quadrail flat mount for it, this one is not a bolt on, but on a slide rail, |
Will this fit on a Ruger 223 rancher? | John...zoom in on the top of this Bipod...you will see that "dove tail" clamp...if you have that feature on your 223 rancher..or if you can change a part to include a male dove tail...then the bipod featured will work.. |
will this auger work in both directions and pull the mix both up and down by reversing the direction of the drill ? | yes it does, and works very well. just hold on to the drill tight if its thick |
will this auger work in both directions and pull the mix both up and down by reversing the direction of the drill ? | Yes, I reverse the drill to force the dry mix down. It speeds up the mixing. |
I've noticed a lot of people mention their dog not being able to lay down with very much room in a medium and their dogs seem to be quite small. My dog weigh almost 9lbs and I was going to order the medium but now I'm considering ordering the large... | When in doubt order the larger one. My dog was only a couple of pounds when I bought it. Now she is about 6 pounds and just about makes it. Make sure you can position it. I brace it in between the seats in front and I have a larger bed for my other dogs (I have 4 small ones) that braces it as well. It works well for me the way I have it. Hope this helps, Judy |
can this one fit t mobile note 3 (N900T ) | I am not sure. I have a Verizon note 3 that it fits fine. I wish I could be of more help. |
can this one fit t mobile note 3 (N900T ) | this is for a galaxy note 3, it should fit any galaxy note 3 phone, service company of cell phone provider doesn't matter as long as its same model. |
I want to re-upholstery an arm chair, which is used but not heavily used. Is the fabric strong enough for that purpose> | It is pretty strong. I think if it isn't too heavily used, this fabric would work. It doesn't look that great, but it's soft and comfortable. It will do the job, but whether it'll look good is a different story. |
What kind of mounting hardware is included? Could it be mounted on the bottom of a table with the outlets facing to the side (instead of down)? | Yes these are great power strips. It comes with two clips that screw in with one screw each. I bought the smaller one for one of our desks and used zip ties to secure it to one of the desk legs and it worked! I've mounted them at desk height on the wall too then you don't have to crawl under the desk ! Wonderful power strip! Even have use at home Hope this helps Magge C. |
What kind of mounting hardware is included? Could it be mounted on the bottom of a table with the outlets facing to the side (instead of down)? | Not with the brackets as included. You could first mount a board of the right size to the table and then put the mounting hardware on the board. You could even use two blocks of wood. Mount the brackets on the blocks, then mount them on the table. Something like that. |
What kind of mounting hardware is included? Could it be mounted on the bottom of a table with the outlets facing to the side (instead of down)? | There are two mounting plates that you screw onto the work area, then clip on to the bottom of the strip. If the outlets are at the 12 o'clock position, the mounting surface is at 6 o'clock; you can not mount it at the 3 or 9 o'clock positions. You'll have to fabricate some brackets if you want to mount it like you mentioned. Hope this helps. |
What kind of mounting hardware is included? Could it be mounted on the bottom of a table with the outlets facing to the side (instead of down)? | It did not come with mounting hardware to allow mounting it to a surface on its side. |
when the earring is in its holder it droops down. How can you make a straight shot into the earlobe if the earring isn't straight in its holder? | Play with the earring a little bit to make it straight. I would have to move it a few ways and it would work great. |
Sorry, first game I buy for PS4, is this the digital download or physical version of the game? | This is for the purchase of the physical disc. You can download the whole game from the PlayStation Network (PSN) as well for the same price. |
Can anyone tell me how well this computer handles gaming on high settings and does it give off good fps. Also would it handle sims 3 & 4 series games. and is the video card meant for gaming what's its classification? | I purchased this computer 4 months ago. I am a gamer and play old school Everquest and can run multiple characters at one time. No overheating issues and no lag |
Wii compatability This card works great in my Canon SD790IS camera. My PS3 also recognizes it. Vista recognized it after I upgraded to Service Pack 2 BUT my Wii does not recognize it.....any ideas? | I think the previous poster meant you can buy a regular SD card (with capacity 2GB or lower) for something like $5. |
Wii compatability This card works great in my Canon SD790IS camera. My PS3 also recognizes it. Vista recognized it after I upgraded to Service Pack 2 BUT my Wii does not recognize it.....any ideas? | For what it's worth, if you have the newest Wii firmware (easy to update if you have a wireless connection), it now supports SDHC cards up to 32GB. So this card would be supported. |
Wii compatability This card works great in my Canon SD790IS camera. My PS3 also recognizes it. Vista recognized it after I upgraded to Service Pack 2 BUT my Wii does not recognize it.....any ideas? | Thanks for your input. What do you mean by 'buy a regular one'? Can I get a SDHC reader that will work with wii, or do you mean get a different card? I really like the Transcend card but it's a pain not being able to use it with the wii. |
Wii compatability This card works great in my Canon SD790IS camera. My PS3 also recognizes it. Vista recognized it after I upgraded to Service Pack 2 BUT my Wii does not recognize it.....any ideas? | Hello, this card is a SDHC card. As stated in other posts, SDHC cards ARE NOT backwards capable. You PS3 and camera can take SDHC cards, the Wii can only take SD cards. Sorry for the bad news, but on the bright side, it costs like nothing to buy a regular one! |
Wii compatability This card works great in my Canon SD790IS camera. My PS3 also recognizes it. Vista recognized it after I upgraded to Service Pack 2 BUT my Wii does not recognize it.....any ideas? | mine still does not. odd. works fine with my ps3 but the wii (with 4.0) still does not |
Are these good to replace hall lights in a home? | I am almost positive that you could not go wrong with this light bulb. It has a MUCH MORE COMFORTABLE color than the regular CFL bulbs and never gets hot. I would maybe get a higher power/wattage/brightness if you have slightly higher ceilings or just a singular light fixture though (just like some folks have mentioned before). If anything buy a few of these bulbs, see if they work, and if the do STOCK UP and if they don't you'll still have a few wonderful light bulbs for smaller lamps around the house. :) Happy shopping! |
Are these good to replace hall lights in a home? | I put them in my hall and I like it. Originally I got them for my kitchen but they give a bright white rather than an amber warm color. |
Are these good to replace hall lights in a home? | Sure, assuming you are replacing 40ish watt incandescents. If you have really high ceilings and/or fixtures with higher wattage bulbs you might want more light than these throw. And, like the others said, the 'warm white' is whiter than it is warm (4000-5000k). |
Are these good to replace hall lights in a home? | I would say yes, they give a nice light, better than the rather yellow CFL versions. I would have said it was more like 50W rather than a 40W equivalent. A nice light |
Are these good to replace hall lights in a home? | I would though they give off about as much light as the 40w i replaced so you may need 2 |
Are these good to replace hall lights in a home? | If it is a single bulb fixture you may want to use the 9 or 12 watt version for a brighter hallway. Use the warm white not the cool white. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.