query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
can you use wood floor cleaner | Yes.....but a good trick is equal amounts of vinegar, water, and alcohol.......works great and the alcohol prevents streaking. |
can you use wood floor cleaner | yes, three of my bed rooms are hard wood floor, mint5200 cleans well . Jasper |
can you use wood floor cleaner | I do, although only a few drops per fill of the tank. I rinse the cloth out before I start to make it damp and rinse it afterwards to clean the cloth |
Does this come with a gel pack that can be frozen and placed in the collar or do you need to place the complete collar into the freezer? | You put the whole thing in the freezer, and if you want it cold, you must disregard the instructions and put it in the freezer NOT in a plastic bag. It works nicely, but doesn't get hugely cold, even that way. Done this way, it IS comfortable and comforting, however. |
Does this come with a gel pack that can be frozen and placed in the collar or do you need to place the complete collar into the freezer? | the entire collar goes in the freezer. it stays soft though and the more you use it the more flesible it becomes. |
I must be doing it wrong because everytime i do this, i get a lot of it into my nasal area and get the kind of feeling that you get when you have cold and your sinus is blocked. I get headache and the small bit of solution constantly get to my throat as if i am eating my own nose..... I squeezed the bottle very very gently and the solution does come out of the other nose, it is just that until the first drop comes out of the other nose, it seems to go to my nasal area (empty space behind the cheek). I didn't blow my nose. what am i doing wrong? I must be doing it wrong because everytime i do this, i get a lot of it into my nasal area and get the kind of feeling that you get when you have cold and your sinus is blocked. I get headache and... » Read More I must be doing it wrong because everytime i do this, i get a lot of it into my nasal area and get the kind of feeling that you get when you have cold and your sinus is blocked. I get headache and the small bit of solution constantly get to my throat as if i am eating my own nose..... I squeezed the bottle very very gently and the solution does come out of the other nose, it is just that until the first drop comes out of the other nose, it seems to go to my nasal area (empty space behind the cheek). I didn't blow my nose. what am i doing wrong? « Show Less | Are you holding your head at the angle shown? I have only had it go into my throat or up high into my sinuses when I squirt too hard or tilt my head to much. |
I must be doing it wrong because everytime i do this, i get a lot of it into my nasal area and get the kind of feeling that you get when you have cold and your sinus is blocked. I get headache and the small bit of solution constantly get to my throat as if i am eating my own nose..... I squeezed the bottle very very gently and the solution does come out of the other nose, it is just that until the first drop comes out of the other nose, it seems to go to my nasal area (empty space behind the cheek). I didn't blow my nose. what am i doing wrong? I must be doing it wrong because everytime i do this, i get a lot of it into my nasal area and get the kind of feeling that you get when you have cold and your sinus is blocked. I get headache and... » Read More I must be doing it wrong because everytime i do this, i get a lot of it into my nasal area and get the kind of feeling that you get when you have cold and your sinus is blocked. I get headache and the small bit of solution constantly get to my throat as if i am eating my own nose..... I squeezed the bottle very very gently and the solution does come out of the other nose, it is just that until the first drop comes out of the other nose, it seems to go to my nasal area (empty space behind the cheek). I didn't blow my nose. what am i doing wrong? « Show Less | Search YouTube videos for "NeilMed Sinus Rinse". There are plenty of helpful tutorials there. |
I must be doing it wrong because everytime i do this, i get a lot of it into my nasal area and get the kind of feeling that you get when you have cold and your sinus is blocked. I get headache and the small bit of solution constantly get to my throat as if i am eating my own nose..... I squeezed the bottle very very gently and the solution does come out of the other nose, it is just that until the first drop comes out of the other nose, it seems to go to my nasal area (empty space behind the cheek). I didn't blow my nose. what am i doing wrong? I must be doing it wrong because everytime i do this, i get a lot of it into my nasal area and get the kind of feeling that you get when you have cold and your sinus is blocked. I get headache and... » Read More I must be doing it wrong because everytime i do this, i get a lot of it into my nasal area and get the kind of feeling that you get when you have cold and your sinus is blocked. I get headache and the small bit of solution constantly get to my throat as if i am eating my own nose..... I squeezed the bottle very very gently and the solution does come out of the other nose, it is just that until the first drop comes out of the other nose, it seems to go to my nasal area (empty space behind the cheek). I didn't blow my nose. what am i doing wrong? « Show Less | If you have any questions about why your nasal area is not clearing, I suggest you see a Ear, Nose, Throat specialist! --- My experience was that for over two years my regular doctor and another doctor told me I just had a lot of drainage and swollen tissue! --- Finally, after seeing a Ear, Nose, Throat doctor, I was told that I may have nasal polyps? --- It turned out that I had a couple of polyps, however, I also had a tumor! --- Luckily, the tumor was non-malignant! --- At the surgery over a half cup of tumor, calcification, and some bone was removed! --- I now can breath wonderfully easy! --- I go in for regular checks because polyps and tumors may come back. I use the rinse 1 - 2 times daily. If you have any questions about why your nasal area is not clearing, I suggest you see a Ear, Nose, Throat specialist! --- My experience was that for over two years my regular doctor and another doctor told me I just had a lot of drainage and swollen tissue! --- Finally, after seeing a Ear, Nose, Throat doctor, I was told that I may have nasal polyps? --- It turned out that I had a couple of polyps, however, I also had a tumor! --- Luckily, the tumor was non-malignant! --- At the surgery over a half cup of tumor, calcification, and some bone was removed! --- I now can breath wonderfully... » Read More If you have any questions about why your nasal area is not clearing, I suggest you see a Ear, Nose, Throat specialist! --- My experience was that for over two years my regular doctor and another doctor told me I just had a lot of drainage and swollen tissue! --- Finally, after seeing a Ear, Nose, Throat doctor, I was told that I may have nasal polyps? --- It turned out that I had a couple of polyps, however, I also had a tumor! --- Luckily, the tumor was non-malignant! --- At the surgery over a half cup of tumor, calcification, and some bone was removed! --- I now can breath wonderfully easy! --- I go in for regular checks because polyps and tumors may come back. I use the rinse 1 - 2 times daily. « Show Less |
Will this control TV#1 for Dish DVR722 over UHF? Do I need any other parts? | That's a question for the manufacturer and/or product seller. I no longer have the unit. |
Will this control TV#1 for Dish DVR722 over UHF? Do I need any other parts? | this is the exact UHF remote that comes with the DVR722 and you won't need anything else |
Will this control TV#1 for Dish DVR722 over UHF? Do I need any other parts? | I am afraid not. This unit is only good for the second set. The #1 unit needs to be IR and line of sight. If you will notice at the bottom of the unit is a number 2, which indicates which TV it is set to. |
Will this control TV#1 for Dish DVR722 over UHF? Do I need any other parts? | You absolutely can control your DVR722 on TV1 over UHF using just this remote (6.4) and no other parts. That is exactly what I am doing. The reason some folks may think it doesn't work is because you first have to enable UHF for TV1 on the DVR itself; it is disabled by default. |
what is the smell? I have floral & perfume allergies. | This product is suppose to be safe for the environment which i love but it does have a pretty perfumy smell. It doesn't stay in your hair alot when you wash it out but it does have a scent. |
what is the smell? I have floral & perfume allergies. | It has a smell it is light, but you can defiantly smell it in your hair after a wash. |
what is the smell? I have floral & perfume allergies. | It does not smell like flowers or has any perfume smell, I can't really describe the smell of it maybe because it's never bothered me. I can tell you what it doesn't smell like: flower, soap, chemicals or perfume. |
what is the smell? I have floral & perfume allergies. | There is no floral or strong smell to this shampoo. This shampoo keeps my color bright and shiney between colorings! |
What does it weigh ? i.e. Is it good for beach vacations where all the umbrellas are taken ? | Product DetailsProduct Dimensions: 14.7 x 6.6 x 6.6 inches ; 5 poundsShipping Weight: 6 pounds (View shipping rates and policies) |
What does it weigh ? i.e. Is it good for beach vacations where all the umbrellas are taken ? | Its super light and sturdy too. Tried it this weekend in pensacola beach. Looked very smart n took 8 mins to setup. Excellent shade. |
What does it weigh ? i.e. Is it good for beach vacations where all the umbrellas are taken ? | This product is very light. If easily goes over your shoulder. Its prefect for the beach. I nought mine to take my three month old to the beach. It was exactly What I needed. |
I have this scrubber, its base shaft (black part in the picture) that connect red part to shaft is broken. Is it possible to buy that part from some? | I had terrible luck with that same problem. No replacement available. Amazon refunded my purchase 100% |
can i use to make selzer water | I wouldn't due to these are compact air tubes. Possibilty of an "explosion" I would guess. Not a major one, but wouldn't take the chance. |
can i use to make selzer water | How can the CO2 inside be any different than any other CO2. I'm looking to do the same thing, only thing needed to know is are these standard 8oz size. |
Got my 1660SWBLK for a month. I just noticed that it makes a "click" sound when closing it. Not sure if it has been like that from day 1. Normal? | Same here from day 1. Took it apart and found that the 'torsion bar', actually a small piece of bent steel wire, was cut too short and is popping of the retaining hole in the blade. Careful re-assembly did not fix this, the wire is too short and will always pop out on this particular knife. I sent it back to Amazon for a refund.These liner lock Leeks are a fraction of the quality of the original frame lock leeks. Spend a few dollars more and get a 1660 or 1660CKT. You'll see a night and day difference. |
Got my 1660SWBLK for a month. I just noticed that it makes a "click" sound when closing it. Not sure if it has been like that from day 1. Normal? | Mine does that, too-- it's probably the ball detent engaging to hold the blade in the locked position. |
What is the minimum size of the stand when closed and not in use? | closed= 48cm or 18.9inches I have 5 of them. Light, compact and superb quality |
What is the minimum size of the stand when closed and not in use? | 19 inches, three of them fit perfect in my Lowepro Pro Roller x200 Camera Bag, sorry for double posting |
What is the minimum size of the stand when closed and not in use? | Hello Kenny: when the stand is completely closed you're looking @ about 2ft, total. The stands are super lite, portable,& durable. They are great for speed lights ,scrims, reflectors,& and I suggest you NOT to use speed lights and the soft boxes outside together! one gust of wind and speed light to the repair shop. Not cheap to have repaired. Happened to me! Very good stands. |
Help please: Can I use an HDMI cable to connect to cable box? | If your cable box has HDMI output,then it should be no problem.......otherwise you can use the component outputs on the cable box. |
will these work for 2013 model year? | Ready Lift Store says 2003-2014: http://www.readyliftstore.com/2003_2013_Ford_Expedition_3_Inch_Lift_Kit_p/rl69-2070.htm |
Does this run small? And, does it shrink? I'm 4'10" and 90 lbs. If I order the Size 1, will I be OK? My last size 1 (different manufacturer) shrunk to a children's size | It seems to run big, because I ordered the 0 for my 4 year thinking it was going to be just right but I had to take it in by 4 folds. Oddly enough the waistline is just right but everything else is too big. Hope this helps. |
Does this run small? And, does it shrink? I'm 4'10" and 90 lbs. If I order the Size 1, will I be OK? My last size 1 (different manufacturer) shrunk to a children's size | This kind runs tall and skinny, but I am a much larger girl. It did not shrink as bad as the heavy ones do. I would still never put it in the dryer, just hang dry. |
Does this run small? And, does it shrink? I'm 4'10" and 90 lbs. If I order the Size 1, will I be OK? My last size 1 (different manufacturer) shrunk to a children's size | I can attest that the ProForce sizing chart was 100% accurate. This was my original review: 5.0 out of 5 stars Careful of the sizing, April 1, 2013 By Donna Anderson - See all my reviews Verified Purchase(What's this?) This review is from: ProForce 5oz. Ultra Lightweight Student Uniform (Misc.) Even though sizing is supposed to be standard, I've had trouble finding a size for my son. Seems the 00 size I want is huge from some places. The size 00 from ProForce that I ordered fit perfect for my son..and matched the ProForce sizing chart EXACTLY. I had ordered a size 00 through the studio we go to and it was huge! Not sure why there was such a large difference in size. Anyways, just wanted to comment that the ProForce size chart was completely accurate and the gi fit awesome. |
What size should I order if I have a large bust? | I also have large breast 5'2 and weight 180lb. not sure which one to perchance. please help |
What size should I order if I have a large bust? | I am a 38DD, 5'3, and hippie....the medium fit me perfectly with room for weightloss to come. The size chart was pretty accurate. Hope that helps. |
how will herbs do in this planter | I think as long as they were in the right sun they'd do great. I love how mine worked out last year and look forward to re-planting soon (in Florida). |
Is there a smell when using these markers? | I didn't notice any smell, but I also have sinus problems.. Hope this helps! |
Can I use the 7 feet Cable w/ a Bluetooth® Portable Speaker that has a 3.5mm audio jack? I need a good Auxilary cable to connect my MP3 player that lacks Bluetooth, Would the 7 feet cable work? | As long as your portable speaker has an auxilary in connection (I'm pretty sure it does), you should be able to connect your MP3 player to it. |
Can I use the 7 feet Cable w/ a Bluetooth® Portable Speaker that has a 3.5mm audio jack? I need a good Auxilary cable to connect my MP3 player that lacks Bluetooth, Would the 7 feet cable work? | The cable will work with any device that uses a 3.5mm input. I am not familiar with the specific device, but as long as there is a 3.5mm input it should work fine |
PS3 Blu-Ray - is this a good choice? I'm upgrading my HT for Blu-ray and will stick with my PS3 slim as the BR player.Is this a great receiver to get for this setup? | ended up getting the 608 instead, and VERY happy with it. the sound is simply incredible when paired with Mirage speakers. |
Can you pour 192 degree water into it to brew tea without damage? | I don`t know. But I never mix too hoot liquids into plastic material. Anyone. It`s not advisable by the risk of extract organic components out of it, even very small quantities, but that are normally carcinogeneous. The use of plastic cups are dangerous enough. |
Can you pour 192 degree water into it to brew tea without damage? | I have a Breville tea maker that I use to brew my tea (various settings let me go up to 212 for black tea), BUT after brewing I immediately pour the hot tea into the pitcher to cool and haven't had a problem doing so. (I love the pitcher because it holds almost 2 full brews from the Breville so I'm set for all day drinking.) |
Can you pour 192 degree water into it to brew tea without damage? | You may be able to as the plastic seems durable, however I don't believe this item is the best choice for continually putting hot water in. |
Can you pour 192 degree water into it to brew tea without damage? | Sorry, I use it for lemonade and kool aid. I checked the papers that came with it and I didn't see anything except that it was only top-rack dishwasher safe, so I would assume it isn't heat proof. |
Can you pour 192 degree water into it to brew tea without damage? | I only use this for cold brew tea and coffee. For anything hot, I would be more comfortable using glass or ceramic container/carafe, unless the manufacturer would attest to its safety up to certain temperature. |
will it fit on a canon 510 cmaera | Hello Judy, I know nothing about your camera but in this case camera is irrelevant. What you will need to know is 1. What size your lens that the filter will mount to is-in this case 58mm? Does your lens allow the filter to even screw on or have a way to attach itself. Cheers. |
How long is the sheath | Hi Billie,Cevered "sheated part" is 7", total length 12 1/2". Mine worked out great!!! |
How long is the sheath | Sorry, this was a gift. I thought the measurements were included? It fit a 6 inch knife in my case. |
Do I use this product in addition to fertilizer and compost? | I use it when transplanting, applying the mycorrhizae granules directly onto the exposed roots. I do use compost, but do not use nitrogen fertilizer at that time. My understanding is that extra nitrogen tends to inhibit the nitrogen fixing function of the mycorrhizae. Once the plant is established with its own population of mycorrhizae inhabiting the roots I suppose that one could supplement with fertilizer as needed. |
it only fires along with my internal falsh T3i and when i put my hands over my internal flash. the external flash doesn't expose, why? | Not sure if you found your answer, but you'll need this to fire the strobe instead of using the pop-up flash on your camera body: Cowboystudio 4-Channel Radio Remote Trigger with 2 Receivers for Studio Strobe.It triggers the strobe to flash when you depress the shutter button. |
it only fires along with my internal falsh T3i and when i put my hands over my internal flash. the external flash doesn't expose, why? | Because it needs to see the light from the internal flash to trigger it. You can set your internal for fill or lower the setting. Ideally get a remote trigger like pocket wizards to trigger the strobe |
it only fires along with my internal falsh T3i and when i put my hands over my internal flash. the external flash doesn't expose, why? | I'm not absolutely sure what is meant by this question but is sounds like he/she is using a Canon Rebel T3i with the studio flash. If the "internal falsh" (sic) is the built-in camera flash (it probably is) and if he/she means that the strobe fires when the built-in camera flash fires, then I presume he/she is using the light sensor slave on the Mettle. (I could be wrong, but this is what I think is meant). So, when the on camera flash is covered, the light sensor slave is not triggered. Does the T3i have a synch cord port? If so, use that. If not, don't cover the built-in flash. |
it only fires along with my internal falsh T3i and when i put my hands over my internal flash. the external flash doesn't expose, why? | I'm not absolutely sure what is meant by this question but is sounds like he/she is using a Canon Rebel T3i with the studio flash. If the "internal falsh" (sic) is the built-in camera flash (it probably is) and if he/she means that the strobe fires when the built-in camera flash fires, then I presume he/she is using the light sensor slave on the Mettle. (I could be wrong, but this is what I think is meant). So, when the on camera flash is covered, the light sensor slave is not triggered. Does the T3i have a synch cord port? If so, use that. If not, don't cover the built-in flash. I'm not absolutely sure what is meant by this question but is sounds like he/she is using a Canon Rebel T3i with the studio flash. If the "internal falsh" (sic) is the built-in camera flash (it probably is) and if he/she means that the strobe fires when the built-in camera flash fires, then I presume he/she is using the light sensor slave on the Mettle. (I could be wrong, but this is what I think is meant). So, when the on camera flash is covered, the light sensor slave is not triggered. Does the T3i have a synch cord port? If so, use that. If not, don't cover the built-in flash. |
Does the collar lay flat when not fully zipped? | Yes, pretty much. I don't find it annoying at all. I fact, it's one of my favorite jackets. |
Does the collar lay flat when not fully zipped? | There is no collar. It comes with the hood attached. It will lay down much like a hoodie. |
Does this control work with LED bulbs/lamps? I assume yes. | Yes, this will work with anything you can plug into it. It's just a simple on/off switch from the remote though. |
Does this control work with LED bulbs/lamps? I assume yes. | Yes if it lamp is designed to run on standard house current (usually 115-120V). |
Does this control work with LED bulbs/lamps? I assume yes. | You assume correctly. It controls the outlet. You plug your lamp into the control unit that's plugged into the outlet. You turn on your lamp or whatever electrical devise you've plugged in, then you use the control to turn the outlet on or off. |
I pan to cut this in 3 feet strips to install them on shelf's, how can I connect them to light up together and what all accessories do I need? | they make led connectors. You can by then on Amazon. This particular roll is an indoor led strip with a casing over the top. Technically they're not really waterproof. If you using them inside I would take the casing off and look for the areas that you can clip with scissors.but yes they make a clip that slides over that you can add wire too |
I pan to cut this in 3 feet strips to install them on shelf's, how can I connect them to light up together and what all accessories do I need? | If you can solder, you can solder two strand wire to the solder pads on each side of the segment cut line-- or you can buy the specially designed connectors. |
I have GT60 2OC 022US, is this charger works on it ? | It's working perfectly well and it has on/off light indicators. Highly recommended as an original charger spare/replacement. |
This is the new model, which brings 6-axis? comes in its original packaging? the transmitter is the one with the 2 modes, just like the picture? | I think the answer to both your questions is YES. It flyers better then the original V959. I have both old model and new. |
This is the new model, which brings 6-axis? comes in its original packaging? the transmitter is the one with the 2 modes, just like the picture? | Hi; I did order one of these from a California seller and was sent the older version (V959) I had to send it back for a refund since it was not what I ordered. The V222 looks exactly the same as the V959 except that the V222 has LED lights that run along the arms to the props. it also has 6 gyro stabilization versus 4 on the V959. The control board (mother board) is a different color too. I believe the V959 is blue and the V222 is green. As far as the transmitter I received I couldn't comment since I sent it back. I did end up ordering from another company out of China. It did come with the dual mode transmitter. Hi; I did order one of these from a California seller and was sent the older version (V959) I had to send it back for a refund since it was not what I ordered. The V222 looks exactly the same as the V959 except that the V222 has LED lights that run along the arms to the props. it also has 6 gyro stabilization versus 4 on the V959. The control board (mother board) is a different color too. I believe the V959 is blue and the V222 is green. As far as the transmitter I received I couldn't comment since I sent it back. I did end up ordering from another company out of China. It did... » Read More Hi; I did order one of these from a California seller and was sent the older version (V959) I had to send it back for a refund since it was not what I ordered. The V222 looks exactly the same as the V959 except that the V222 has LED lights that run along the arms to the props. it also has 6 gyro stabilization versus 4 on the V959. The control board (mother board) is a different color too. I believe the V959 is blue and the V222 is green. As far as the transmitter I received I couldn't comment since I sent it back. I did end up ordering from another company out of China. It did come with the dual mode transmitter. « Show Less |
does it come with a sim card | Yes but I didn't get a 8gb got a 4 but it wasn't a problem to me as my s3 have a 8gb prior so swapped it out |
do this runs with a gsm sim-card? | You would have to check with the manufacturing spec's to know the answer. You can check online for your specific information. |
do this runs with a gsm sim-card? | No it does not it runs on a CDMA which is the same coverage type as Verizon. |
Hello... This Cell Phone It's The Special Edition ? | It's the 4G,I recommend you do not buy it, I buy mine and is a Refurbished Cell |
is this the new beast | I have the same question in mind because if you click on this link that shows the "New Formula" blue label, it brings you to the page showing the old green label. This is if your buying from the seller named "whatSUPP". I just placed an order for one yesterday so we'll see what comes in the mail. I'll keep you posted. I don't mind if either one comes because the old formula was good anyway. |
is this the new beast | Yes, they changed there formula and also changed the packaging but it's not more different then the old beast creature. |
is this the new beast | Follow up: just got my order in the mail. I received the old beast formula. Green label. |
is this the new beast | yeah they added some stuffand ill tell you I really like itnot to say I didnt love the originalbut the new one is really greatI definitely recommend giving it a try if you liked the green label you will love this oneoh and it tastes great like the original too |
Are the shelves removable? What are the shelves made of? | I am not home for some time right but I do know I am very pleased with my cabinet. |
Are the shelves removable? What are the shelves made of? | The shelves are wood also. I know you can remove some of the shelves so you can fit tall or short shot glasses. I'm not sure if they all come out, but I had no problem moving them around to accommodate a lot of shot glasses. The cabinets are very well made and not very hard to install. I hung the small one alone and it took 2 people to hang the larger one. I definitely recommend them!! |
Are the shelves removable? What are the shelves made of? | Yes & it looks like same wood as rest of cabinet but I don't know for sure. I love my cabinets! I have 6 of them for my Grandmother's salt & pepper shaker collection. First time I ever been able to show them. |
All of my keyboard have letters that disappear. I want permanent letters, is this the one? | Although my keyboard has had limited use, I have had no problem with letters disappearing. On one occasion I dropped the keyboard and it struck a hard object. The "8" key was knocked off but nothing broke. I was able to snap it back on but with difficulty because the catches that hold the key in place are sturdy. |
All of my keyboard have letters that disappear. I want permanent letters, is this the one? | I suppose by "disappear" you mean that eventually the letters wear off with use (?). I think that might depend on extent of use, intensity, and other variables involving your keyboarding practices (like long fingernails). I can tell you that the letters feel slightly raised, which might make them more durable, visually. |
All of my keyboard have letters that disappear. I want permanent letters, is this the one? | I'm not sure. I have not had this keyboard long enough to say either way. The manufacturer does boast of, "durable keys with laser printing and UV coating." After two months of use, it looks the same. I use it daily at work. |
All of my keyboard have letters that disappear. I want permanent letters, is this the one? | The keys are laser etched. This means they will wear significantly slower than keys that are only printed on, but they will not last practically forever like the old IBM keyboards that actually had a separate black piece of plastic inside the keys instead of only a top layer applied. Consider the cost of the product, you will have to pay significantly more to get that type of keyboard because they're considered a niche product and also tend to have mechanical switches in them that further raises the cost.To make any keyboard's key markings last as long as possible, only use it with clean hands, clean dirt off before it builds up much, and above all keep your fingernails trimmed short. The keys are laser etched. This means they will wear significantly slower than keys that are only printed on, but they will not last practically forever like the old IBM keyboards that actually had a separate black piece of plastic inside the keys instead of only a top layer applied. Consider the cost of the product, you will have to pay significantly more to get that type of keyboard because they're considered a niche product and also tend to have mechanical switches in them that further raises the cost.To make any keyboard's key markings last as long as possible, only use it... » Read More The keys are laser etched. This means they will wear significantly slower than keys that are only printed on, but they will not last practically forever like the old IBM keyboards that actually had a separate black piece of plastic inside the keys instead of only a top layer applied. Consider the cost of the product, you will have to pay significantly more to get that type of keyboard because they're considered a niche product and also tend to have mechanical switches in them that further raises the cost.To make any keyboard's key markings last as long as possible, only use it with clean hands, clean dirt off before it builds up much, and above all keep your fingernails trimmed short. « Show Less |
All of my keyboard have letters that disappear. I want permanent letters, is this the one? | I had that same problem with all my previous keyboards! But the letters on this one look the same as they did when I received the keyboard. I use this keyboard every day - very amateur writer - for quite a few hours a day and they're still "all here". They haven't started to disappear bit by bit like the letters on my previous keyboards did. So, this keyboard seems to be solution so far... |
All of my keyboard have letters that disappear. I want permanent letters, is this the one? | The keys are laser etched. This means they will wear significantly slower than keys that are only printed on, but they will not last practically forever like the old IBM keyboards that actually had a separate black piece of plastic inside the keys instead of only a top layer applied. Consider the cost of the product, you will have to pay significantly more to get that type of keyboard because they're considered a niche product and also tend to have mechanical switches in them that further raises the cost. To make any keyboard's key markings last as long as possible, only use it with clean hands, clean dirt off before it builds up much, and above all keep your fingernails trimmed short. |
All of my keyboard have letters that disappear. I want permanent letters, is this the one? | I have not had it long enough to say, over time, but so far it is good. I have had others that the letters disappeared within a month, on the often used letters, so comparing tothose I would say it is better. I really love the way it is so easy to use. Comfortable typing. I do a lot of typing online and have enjoyed this keyboard more than others. And for the price, I think it can't be beat. |
What is the percentage of nitrogen in this product? Is it displayed on the label? | all it says is 85% blood meal, 85% crude protein and not more than 2% crude fiber.I use it to keep deer away from my plants. |
What is the percentage of nitrogen in this product? Is it displayed on the label? | Hello Erik, Unfortunately, I do not remember since I bought it about a year ago. I may not have a label anymore. But I remember hat I liked the product, it was according to specs, and I will definitely buy again from this seller. |
What is the percentage of nitrogen in this product? Is it displayed on the label? | No! Colleen Springer's comment is correct. I wonder - Just what is the remaining 15% of the product? |
Screw on rubber tip , I need the screw on rubber tip, I have muscular Dystrophy and use mine to navigate asaphalt & concrete walkways and the rubber tip has worn thru till the Small metal tip is thru the rubber,and have come close to loosing balance... | Same request for a somewhat different reason (best of luck, Johnny). Can anyone out there help with this info? |
Can I use this is a bath? | Yes for sure it will be very relaxing its hard to say how much to use, or how big your tub is, I would start with 5 drops and work my way to the strength I want maybe 15 drops? Enjoy! |
Can I use this is a bath? | I added some to Epsom salt and a few drops of vanilla(same brand)I used about 5 drops of the lavender; was a very relaxing and amazing smelling bath!! |
Hi I have a 2011 Ford Ranger are these seat cover a good fit for my truck | as long as you do not have side impact airbags these will be an okay fit on your vehicle. |
There does not seem to be any way to set the date/time on the camera. The instructions do not match the menus on the camera. Can you help? | You need to navigate the menu system to find the date/time setting:1.Turn on camera2. Press the "menu" button3. Press "OK" on "Settings" screen4. Press to the right ("Time" button) 8 times to get to "MORE" press "OK"5. Press to the right ("Time" button) twice to get to date/time then press "OK" |
There does not seem to be any way to set the date/time on the camera. The instructions do not match the menus on the camera. Can you help? | Setting the date/time is done by first going in to the menu and then selecting MORE to bring up the lesser used menu items like date/time. |
There does not seem to be any way to set the date/time on the camera. The instructions do not match the menus on the camera. Can you help? | It appears this has already been answered for you. I would be glad to help if you are still having trouble. |
I really do need to know how to turn this thing on. I've turned it, pressed it. Are they all just broken? | one side is softer than the other. You have to push it pretty hard, but the first click is solid light, second click is flashing. |
I really do need to know how to turn this thing on. I've turned it, pressed it. Are they all just broken? | It turns on if you press the red part in the center. If you manage to get it on, then you will find out that there is also a flashing mode. |
I really do need to know how to turn this thing on. I've turned it, pressed it. Are they all just broken? | YOu just press it and it goes solid, press it again and it blinks and then press it again to turn off. I have one that works right all the time and the other I have to fiddle with the battery to get it to work. |
I really do need to know how to turn this thing on. I've turned it, pressed it. Are they all just broken? | In answer to your question: You have to make sure that you are on the right side of the red cover where the embossed circle is, then press in the center. When first new, it can be a challenge, but the switch does get easier when you get the hang of it. The switch is right under the red cover. You can remove this cover by lifting the red plastic and you will see the battery along with the switch. Hope this helps. |
I really do need to know how to turn this thing on. I've turned it, pressed it. Are they all just broken? | Just press it hard. Once, it will come on. Twice, it will blink. Mine works great. |
What would you recommend to record a rear view video? I need to record what is behind me. | This camera could be easily mounted in the rear window, and the included power cord is certainly long enough unless your vehicle is really long. |
What would you recommend to record a rear view video? I need to record what is behind me. | Use 2 of these units. One mounted on the front windshield and one on the back. You may need an extra long power cord for the rear. |
What would you recommend to record a rear view video? I need to record what is behind me. | sorry, unable to answer this question. do not really know.what do you think about dashboard camera you have now? we ordered one of these, bur seller send wrong item to us. |
will this fit a 2009 razor? | I don't know, we have a 2012 Polaris Ranger, if the dimensions for the two bikes are the same then I would think it would fit the razor |
Sanyo VPC-PD2BK or Panasonic TA-1? | I have both: Sanyo and the Panasonic. Both are excellent, but the Sanyo has stereo microphone, flash, can take picture while doing a video and is better built. The quality of the videos and pictures is very good on both, but the Sanyo has an edge. The Panasonic will refuse to charge after a while, and unless you have a wall charger for your battery, well, you are out of luck. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.