query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
can i add pepperoni to the italian mix | Yes you can! Ad one level TS of freeze dried granules to the bread mix during the Bread Machine mixing process. But, it depends upon your taste comfort and/or flavor. The first loaf may be an experiment as to your liking because you're baking the Italian Mix. If you use fresh pepperoni BITS in lieu of freeze dried cut it down to one-half teaspoon because of the oil still within the fresh pepperoni. Oil does permeate the mix. Again; it may be an experiment on the first loaf either way. Make sure the pepperoni bits are fine ground - fresh or freeze dried. |
How can I get the correct size | You can google how to measure for compression stockings or go to a medical supple store and they will measure you. |
How can I get the correct size | Go to Absolutemedical.com. It will give you directions and pictures on how to measure correctly for ankle measurement, calf measurement, and calf length. It also explains the compression difference you will need to know in ordering the correct size. |
How can I get the correct size | There are small boxes to the left of the large photo. One of the boxes has a size chart....you need to measure certain areas of our legs |
Will the batteries leak if it falls over on the ES1224 truck Pac thanks | I own three of these units. They are the best jump packs on the market right now. The batteries are sealed so they won't leak if tipped over. |
When turning the radio off with a usb drive in does it stay where it shut off at or does it start at the beginning? | Good question, sad to say, the drive starts from the beginning once you turn it off, then it restarts from the first song, so whenever I do that I am constantly having to hit the "next" button over and over to get to where I last was....Same with using a SATA card. Other than that little glitch I really like the unit as a whole. For the price? I think it's ok.Hope this answers you coherently. |
For those of use who don't know about filtration, someone please explain how to use this and other filter media. Where to place it and now to use it. | It's supposed to be the first stage in a canister filter. If you have one you'll notice that there something that looks like a black sponge/foam. It's supposed to either be used with it or in place of it. It does provide a growing environment for bacteria, but it's not as good as I would have liked. |
Can you take pictures while filming? | I believe that MAP is correct. However, the movie is actually a progression of individual pictures called frames. There are two solutions that will allow you to access the individual frames. One is to use a movie editing program to isolate and copy the frame. The other is to use a movie player program that allows you to step through the frames. Find the frame you want and use the key combination (command+shift+4 on a MAC) to take a snapshot of the frame. The movie that you take with your camera is an MPEG file so any such program will be able to handle the format. Remember, even if the movie is taken in 1080 pixels the quality will not be that of a still shot taken with your camera. I believe that MAP is correct. However, the movie is actually a progression of individual pictures called frames. There are two solutions that will allow you to access the individual frames. One is to use a movie editing program to isolate and copy the frame. The other is to use a movie player program that allows you to step through the frames. Find the frame you want and use the key combination (command+shift+4 on a MAC) to take a snapshot of the frame. The movie that you take with your camera is an MPEG file so any such program will be able to handle the format. Remember, even if the... » Read More I believe that MAP is correct. However, the movie is actually a progression of individual pictures called frames. There are two solutions that will allow you to access the individual frames. One is to use a movie editing program to isolate and copy the frame. The other is to use a movie player program that allows you to step through the frames. Find the frame you want and use the key combination (command+shift+4 on a MAC) to take a snapshot of the frame. The movie that you take with your camera is an MPEG file so any such program will be able to handle the format. Remember, even if the movie is taken in 1080 pixels the quality will not be that of a still shot taken with your camera. « Show Less |
Can you take pictures while filming? | Yes, if you press the shutter button while capturing video, it will save frames from the video at whatever resolution you are shooting the video at. |
I have a Mopar soft top I had just put on my 97 wrangler, The windsheild frame seal was missing, would this be sufficient ? | I don't think this will give you the proper seal you are looking for. Also, this works with tops that have a small piece that fits into a channel, I don't think the mopar top comes with a piece like this. Although it could be placed on the bottom side, I think that would make you top too tight and probably unable to fit the rear channels |
I have a Mopar soft top I had just put on my 97 wrangler, The windsheild frame seal was missing, would this be sufficient ? | honestly not sure...Mopar should be able to tell you the right fit for their design, if not ask on Jeepforum.com |
I have a 5 year old girls, will this fit her? | Hi - I would not buy it for someone that young...I'd be afraid they could choke on it. I've had it fall out of my mouth a couple of times, and it fits very loosely inside. I'm not a big fan of it, but have continued to try it to get used to the fit. My recommendation would be the one's you custom mold to your bite. They are about $70 on amazon but $300+ from your dentist. I liked mine a lot, but my dog ate it (2nd one), so I decided to try this. Good luck. |
I have a 5 year old girls, will this fit her? | Probably not. It has three adjustment positions. I use it in mid position and I am an average adult male, 5" 10" at 180 lbs. I suggest you send your search engine to find "dental guard for children". HTH. This works very well for me. |
I have a 5 year old girls, will this fit her? | I don't know how big a 5 year old's mouth is. I would try the slim model. The bite wings are about 2 inches apart. |
I have VM pay as you go plan. Will this work with it | I bought this for my son who has Virgin Mobile, it is a VM phone and took only a few seconds to complete the swap online. |
I have VM pay as you go plan. Will this work with it | Yes, unlike mspinkie I had some trouble with the online swap, but I called and was able to switch in a few minutes |
I have VM pay as you go plan. Will this work with it | i recommended that you call virgin mobile phone 888 322 1122 and they will help you in any question you have |
I have VM pay as you go plan. Will this work with it | This is not a PayLo phone. Sorry. There is only one plan you can use with this phone and that's the Beyond Talk plan. |
It is compatible for iphone 5, or who needs for the iphone 5 | This cable does not support the iphone5. The connector for the Iphone5 is different. http://img.gawkerassets.com/img/184dddyc0qvoajpg/original.jpgThis Pioneer cable is for the iphone 4/4s and most ipods. |
It is compatible for iphone 5, or who needs for the iphone 5 | The iphone 5 has a small adapter called a "Lightning" adapter. This cord is for a 30 pin adapter for iphones 4 and older. However, there are converter adapters costing anywhere from $3 (non apple) to $37 (apple) - just search amazon for: 30 pin to lightning. |
It is compatible for iphone 5, or who needs for the iphone 5 | it works with any ipod or iphone it's the head unit that this cable is compatible with so no worries |
It is compatible for iphone 5, or who needs for the iphone 5 | you will need the lightning to 30 pin adapter for this to work http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter or you can buy the new cable CD-IU201S |
Will this work as a replacement to oEm for 09 yaris? | You can take a look at http://www.crutchfield.com/p_105CSV628/JVC-CS-V628.html?showAll=N&search=jvc_csv628&skipvs=T And see if it feets your car. (Link "Does it fits my car?") |
Will this fit 31x10.5x15 tires? | You will need a 31" cover. If you wish you can call us at 303-447-0902 7am to 5pm MST and we can help get the best fit. |
I have a Honda 1100 & a class A pusher will this product work | I would not trust it to do it. Its thin, flimsy and I wish I could send it back. Fine for cargo, boxes, fire wood light bikes, but that's all I would use it for |
What is with the fluctuating price? Why the volatile price? | It seems strange to me too, every time I look at this chair it is a different price. I found plans to build one with a more solid frame, that you can use a regular car seat from a junk yard, for $80 in parts if you have a welder. I may try that before buying this chair with its high markup in price. |
For those who have this do these last a long time with daily use? Also instructions say use highest heat setting, will it hurt metal? (electric/gas) | Been using it every day here. This isn't a cheap aluminum perk. It's very durable.We use highest heat till it just starts to perk, then drop down to low, just to the point of not perking. Don't want scorched coffee. |
For those who have this do these last a long time with daily use? Also instructions say use highest heat setting, will it hurt metal? (electric/gas) | mine has lasted for over a year maybe two. I use it on electric stove top. I read people have used it outdoors while camping. it's made very sturdy and I'm sure will last a long time with normal everyday use. |
For those who have this do these last a long time with daily use? Also instructions say use highest heat setting, will it hurt metal? (electric/gas) | Been using it every day here. This isn't a cheap aluminum perk. It's very durable. We use highest heat till it just starts to perk, then drop down to low, just to the point of not perking. Don't want scorched coffee. |
Will this HD sight fit the XDS series?? | I got them for my 3.8 inch XDM 40 compact and they fit. Gunsmith said they were very tough to install. Trijicon says these sights fit both XD series and XDM series. My favorite night sights so far. |
Will this HD sight fit the XDS series?? | Yes they fit ,but remember Xd sights are pressed in TIGHT!!! It took using a dremel grinder to remove my old front sight... but with patience and a lot care these work great !!!!!! |
Will this HD sight fit the XDS series?? | I don't think so - you should really check the Trijicon website to confirm... |
I this compatible with the Pentax K-50? | Yes all the K-mount lenses will fit your camera even the ones that aren't auto focus. I had a K-30 before my new K-3 and I loved it. The 18-135 is a great every day lens because of its zoom range, I always have mine with me. |
I this compatible with the Pentax K-50? | It should be. Pentax is known for being compatible across multiple modules. |
I this compatible with the Pentax K-50? | I believe this lens will work with all K series cameras. It works great on my K-3 |
does it work on bmw top | I am sure it will. I used this product to change the color of my dashboard and door panels. Just follow the directions. Pre-cleaning of the area is key. |
does this part fit the 2015 CX-9 touring? | Yes, 0000-8L-N01 , Side Rail fits 2015 CX9 and the Crossbar part# is 0000-8L-N02B. thanks, Quirk Mazda Parts Dept. |
does this part fit the 2015 CX-9 touring? | Yes, 0000-8L-N01 , Side Rail fits 2015 CX9 and the Crossbar part# is 0000-8L-N02B.thanks,Quirk Mazda Parts Dept. |
I'm wanting to install this on a thin metal screen door on a sun room, not a standard door. Will this door work? | Yes, it will work because that is exactly what I did. The screws in my kit were plastic screws and you cut them to length after you install the door. The hard part is cutting the hole in the sheet metal of the storm door. I used an oscillating multi-tool with a metal-cutting blade to cut the hole. |
I'm wanting to install this on a thin metal screen door on a sun room, not a standard door. Will this door work? | Probably not without some modification. The door has inner walls that are the standard thickness of a wooden door. And the screws are also long wood screws. At the very least, you'd have to trim the inner walls down and get some different screws... probably even go with nuts/bolts and drill straight through and bolt both sides of the frame directly together. |
What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the responses so far. What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the... » Read More What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the responses so far. « Show Less | La calidad con audífonos es muy buena. Sin audífonos no es la mejor puso es los parlantes tiene atrás y eso disminuye la calidad del audio. |
What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the responses so far. What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the... » Read More What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the responses so far. « Show Less | To my surprise, the sound quality is much better than my Xperia S phone. In particular the bass is thumpingly powerful. I'm using my Sony XBA 4 earphones, and the sound from the Xperia S Tablet is more powerful than both my Xperia S and Sony Walkman MP4 player, although my MP4 player beats it in fidelity. As long as you go with good headphones you won't be disappointed with the sound of this device. |
What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the responses so far. What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the... » Read More What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the responses so far. « Show Less | I think the quality is great, but just like it has been said, it does depend on the quality of your headphone. I also use a small speaker and it sounds really good. |
What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the responses so far. What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the... » Read More What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the responses so far. « Show Less | I think the sound is really good, it is enhanced by software but you can enjoy it. Obviusly it has not so much power, it is just a tablet, but the quality is good. |
What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the responses so far. What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the... » Read More What is the sound quality using headphones or earbuds? Is it Walkman quality? Update: Sorry, I should have specified that I would be using high quality headphones or earbuds. Thanks for the responses so far. « Show Less | The output is great (my opinion), however that will depend on the quality of the headphones as well. During the time I was using the latest OEM blackberry headphones that went to my blackberry torch 9850. We all know how good of a quality blackberry speakers are. Hope this helps. |
Does this adapter have audio-passthrough? | Yes, as this adapter doesn't have any way to alter the signal, what comes in is going out, it's a straight wire adapter. |
Will this fit a 2002 G500? If not, please cancel my order... | According to the Mann Hummel catalogue (https://www.mann-hummel.com) filter part number C3698/3-2 is suitable for a 2002 Mercedes G500. |
Will this fit a 2002 G500? If not, please cancel my order... | I'm sorry but I don't know if it will fit your car. Your best bet is to call a MB dealer |
My daughter is 14 and has very mild acne, should I purchase the Acne kit or just the Regular cleanser and toner? I don't want her skin raw. | It won't make her skin raw but will tingle. I have sensitive skin with mild acne and I used to use only the wash & toner. Have added the therapeutic lotion and it does help. But like I said it does tingle. |
My daughter is 14 and has very mild acne, should I purchase the Acne kit or just the Regular cleanser and toner? I don't want her skin raw. | It will definitely make it raw. Especially mild acne. I ended up returning this, my skin got so dry, red and flakey. I used it got almost 30 days. I wanted to give it a fair shot cause I've read such great things but my skin hurt! I just switched to "yes to tomatoes" and so far so good. |
My daughter is 14 and has very mild acne, should I purchase the Acne kit or just the Regular cleanser and toner? I don't want her skin raw. | You could consult with your dermatologist. But i believe the trick is using the who kit religiously. |
My daughter is 14 and has very mild acne, should I purchase the Acne kit or just the Regular cleanser and toner? I don't want her skin raw. | For me you have to get the kit. But I don't know how her skin will react when she used the product because Everybody has different skin type . |
My daughter is 14 and has very mild acne, should I purchase the Acne kit or just the Regular cleanser and toner? I don't want her skin raw. | I'm not sure, but it really works well with acne. I only use it once a day (nighttime). In the morning I use a good cleanser and just put on moisturizer. During the winter (Texas so not harsh cold) my face is much dryer, but I have oily skin and the CLENZIderm really controls that. I would just suggest if you purchase it that she try it once a day and if it's too harsh then skip every other day maybe. I have used this product for years and it's not too harsh for me. I guess it really depends on how sensitive her young skin is. Sorry I can't be more helpful |
What are the dimensions on each size basket? ALSO do the large and small fit inside the hanging shelves? | Rough estimate because I'm currently nursing my child to sleep. Small: 12x5x5 Large: 12x12x12 Small fit in hanging basket, large do not. |
Can I transfer files to this device from my ipad 4 and use it like any other flash drive on my PC ? | No. Not exactly like any other flash drive although it is easier to drag files from the Mac/PC to this iflashdrive than to drag them from the ipad4 to the flash drive. Only certain files open up in the local storage of the Ipad4 to be saved on the flash drive. And not all files on the PC/MAC that are dragged onto the iflashdrive will open up on the ipad4. That will depend on whether there are similar apps on your ipad and even then the files may look different than they do on the PC/Mac laptop. |
Can I transfer files to this device from my ipad 4 and use it like any other flash drive on my PC ? | yes. works very well. lightning connection side (or the 30 pin adapter) allows connection to ipod or ipad and put files on the memory stick. then take the stick to the pc and connect to the usb to have full access to those same files. works both ways. excellent device. |
How many inches high are the feet...can it be used without the feet? | The feet are about 2 inches high. I guess you don't have to put the feet on, but we did. |
How many inches high are the feet...can it be used without the feet? | You can use it without the feet. They are screw in. The feet are about 2 and 3/8 inches, 3 inches with the padded stop. |
How many inches high are the feet...can it be used without the feet? | It can be used without he feet. It sits about 2.5 feet high with the feet and I would say the feet only add about 4 of those inches. |
How many inches high are the feet...can it be used without the feet? | Short of going to actually measure them, I would give them a good 3"-4" in height. When the ottoman is shipped, the feet are not attached, so you could leave them off if you wish...and the ottoman would then sit completely flat on the floor. |
I´m planning to buy a pair for my Suzuki Vstrom 650 motorcycle. It is possible to buy one SPOT and one FLOOD? Also it comes with the switch? | They come in pairs so I'm not sure on that one. Yes it comes with a switch, but mine are on my jeep so I have everything running to a switch pannel. They're bright as all get out though. Love them. |
Can you use two monitors at once with this computer? | It does not come with dual monitor capability. You will need to add a low profile DMS59 video card and then can connect two monitors using VGA or DVI splitter cable. |
How do you clean the bucket? Is it heavy? | The empty bucket is only 5.8 lbs You can easily hose it out and let it air dry upside down so the water can drain. |
These are very pretty. Can you tell me how many ounces they hold? | They hold 11 ounces, filled to the top. We also carry larger bone china mugs. If you put "Joanbet's ChinaFind" into the Amazon search window, all of our fine bone china beaker offerings will come up. Thank you for your interest and be well. |
Can these covers be used while the cord stump is still healing? By folding down the top or something? | I am also not totally sure. We also used disposables for the first week. We had not yet discovered these. These have a pretty low rise though. They have a much lower rise than our one size pocket diapers did. I would guess that they would work fine for an average size newborn. |
Can these covers be used while the cord stump is still healing? By folding down the top or something? | It doesn't snap down like some newborn covers but it does have a pretty low rise. If you need it a little lower, you can tuck the top down between the baby and prefold/insert, I haven't had any leakage doing this. |
Can these covers be used while the cord stump is still healing? By folding down the top or something? | I'm not totally sure because we used disposables for the first week or two. However, in general, they fit below the belly button. I've heard it described as "bikini cut" when you use with trifolds. |
I have a samsung HT-F6500 system.will this fit those speakers | I have an Onkyo HT-S5600 system. I use these for all 4 surround speakers. I had to work with the stands a little to get them to stand up. Although the surround speakers on the Onkyo are 4.5"x9"x3.5" and I have the stands sitting on carpet. I'm sure they would stand much easier on hard wood floor. These stands will definitely fit the Samsung speakers. They will probably stand up a little better too since the Samsung speakers are a little smaller. |
I have a samsung HT-F6500 system.will this fit those speakers | I can't say as I am not familiar with that system. I use the stands for sony speakers; 3X3X6. I bought the stands because they fit within my wall unit. They are sturdy stands. |
I have a samsung HT-F6500 system.will this fit those speakers | If the speakers have a female threaded insert on them then they should work. If the speakers are meant for bookshelf only then they will not have any means to be fastened in the housing. |
Being newer to sewing, but wanting to increase my supplies, What do you think is better? This set or the set with 32 that is also here on Amazon. | If you are new at this craft, you should go with the 15 piece set. Be prepared to look on amazon to find the videos on how to use these feet. They don't come with instructions |
Does this unit (Model: XO1-CTC) support the XO Reverse Osmosis Upgrade? | Hello Michele, I would be glad to answer your question. The X01-CTC does support the reverse osmosis upgrade (RO). Thank You, BottleLess Direct Customer Care |
What TYPE of wood are they constructed with, pine? Description just says constructed of the wood in cherry finish. | Pine but they are weak, I ordered 4 and when I got them two of the chairs were broken. |
What TYPE of wood are they constructed with, pine? Description just says constructed of the wood in cherry finish. | Yes I am guessing pine as they are not very heavy to move and some of the finish has scratched and it is lighter wood underneath. Make sure to keep a set of allen wrenches available as the screws loosen under heavy use. We have had them for almost three years and have held up well. We typically keep the two armed chairs and four armless chairs at the table at all times and keep two other armless chairs in a hallway to pull in as needed. |
What TYPE of wood are they constructed with, pine? Description just says constructed of the wood in cherry finish. | I'm not sure what the wood is. It's very weak wood. I won't order them again. I ordered 6 thinking they would last my husband and I the rest of our lives, we are senior citizens. Our cleaning lady was moving one and it fell apart. I would love to have 2 more but won't get them because of the cheap wood and workmanship. They didn't come with the little circles that cover the heads of the screws either. Some screws are way too long and go through the outer side. Very poorly made. |
What TYPE of wood are they constructed with, pine? Description just says constructed of the wood in cherry finish. | Pine. When mine arrived all 8 were broken. After a 2 month fight I finally got money back. Buyer beware. You get what you pay for. Very cheap. |
does it have to be diluted? | Nope- it even comes with a sprinkle cap so you just sprinkle it on the weeds |
does it have to be diluted? | No it doesn't need diluted, it's ready to use but I wasn't impressed. I put it on my driveway a month ago and I've already got regrowth. |
is this a real fender guitar? | Squire is owned by Fender and operates as their bargain brand. The headstock says "Squire by Fender". The back of the headstock says " Designed and Backed by Fender". That being said, it's an Indonesian guitar. The hardware is not what you'd find on an American or even Mexican Fender. The tuners are not standard Fender tuners. The bridge is not a standard Fender bridge. The pickups are not standard Fender pickups. This is why is retails for $99 and not $1200. On the other hand, the workmanship is better than you'd expect for the price. The neck is nice. The inlay work is topnotch. The finish is clean and even. Out of the box, it took me a couple of hours to set it up for my 9 year old. There are parts we plan to replace as he progresses in lessons - the heads are the first thing to go. My bottom line is that for the price, this thing is better than expected. Expect to put a little money in it down the road. There are lots of forum posts out there that detail how people work on these, just do a little research. |
Does it come with all of the nozzles, or do I have to purchase those separately? | It comes with everything and works great fro everything I have tried from grass to apples. |
My husband has trouble moving, when we go out with his scooter and he has a diarrheal accident, will this hold until he can get changed? | My family member did not like them because the leg holes were so very large she was afraid the pants would not contain any bowel emissions. The Tranquility premier brand perform very well. |
are this graphics card can be use in a H-Joshua-H61-uATX whith an intel core i5 3470? | Your motherboard has one pciE 16 (gen 2.0) slot so that's ok. The titan is 27.4 cm long, your motherboard is 24.4 x 24.4 so the titan is bigger than your motherboard so guess it depends on the case if it will fit, the titan can use up to 250W, can your power supply provide the additional power the titan needs. Given your original question, good luck. |
can you tell me the dimensions of the case? I read that the TDKA33 would fit into this case. | I left the camera with the case with my parents in HI. Sorry I'm unable to answer your question. You might try checking the dementions of the Fuji x-10 and your item. I use the case for my x-10. |
What kind of tools do you need to assemble? | simple hand tools flat and Phillips screw drivers as well as rubber hammer and adjustable wrench |
What kind of tools do you need to assemble? | simple hand toolsflat and Phillips screw drivers as well as rubber hammer and adjustable wrench |
What kind of tools do you need to assemble? | We also found it easier to assemble with our own ratchet with a long attachment for the deeper holes. It comes with a plastic part for this aspect of assembly (you turn the plastic ratchet attachment with a screw driver), but using a real ratchet worked better for us. |
Where is this item made? I just bought the Channellock 6 in 1 screw driver and had I known it was made in China I wouldn't have bought it. | To the best of my recollection, this is made in Canada. This is actually a license of the megapro 13 in 1 ratcheting screwdriver. Megapro makes 2 variations on that design which take single ended bits. Channellock also licenses the KTC (Kyoto Machine Tool) DBR14/DBR16 that is made in Taiwan for their 18 in 1 screwdriver. I love the Megapro/Channellock 13 in 1 design and own several of both so that I keep them around where I need them. The Ratcheting Mechanism is Top Notch. I use the color coding to keep track of different types of bits. Basically, I can have 2 screwdrivers and drive 24 different screw heads. To the best of my recollection, this is made in Canada. This is actually a license of the megapro 13 in 1 ratcheting screwdriver. Megapro makes 2 variations on that design which take single ended bits. Channellock also licenses the KTC (Kyoto Machine Tool) DBR14/DBR16 that is made in Taiwan for their 18 in 1 screwdriver. I love the Megapro/Channellock 13 in 1 design and own several of both so that I keep them around where I need them. The Ratcheting Mechanism is Top Notch. I use the color coding to keep track of different types of bits. Basically, I can have 2 screwdrivers and drive 24... » Read More To the best of my recollection, this is made in Canada. This is actually a license of the megapro 13 in 1 ratcheting screwdriver. Megapro makes 2 variations on that design which take single ended bits. Channellock also licenses the KTC (Kyoto Machine Tool) DBR14/DBR16 that is made in Taiwan for their 18 in 1 screwdriver. I love the Megapro/Channellock 13 in 1 design and own several of both so that I keep them around where I need them. The Ratcheting Mechanism is Top Notch. I use the color coding to keep track of different types of bits. Basically, I can have 2 screwdrivers and drive 24 different screw heads. « Show Less |
Where is this item made? I just bought the Channellock 6 in 1 screw driver and had I known it was made in China I wouldn't have bought it. | The screwdriver is made in Canada & the bits are made in Tiawan. The Magapro 13 in 1 has the better bits. It's made in the same places. |
Where is this item made? I just bought the Channellock 6 in 1 screw driver and had I known it was made in China I wouldn't have bought it. | To the best of my recollection, this is made in Canada. This is actually a license of the megapro 13 in 1 ratcheting screwdriver. Megapro makes 2 variations on that design which take single ended bits. Channellock also licenses the KTC (Kyoto Machine Tool) DBR14/DBR16 that is made in Taiwan for their 18 in 1 screwdriver. I love the Megapro/Channellock 13 in 1 design and own several of both so that I keep them around where I need them. The Ratcheting Mechanism is Top Notch. I use the color coding to keep track of different types of bits. Basically, I can have 2 screwdrivers and drive 24 different screw heads. |
Where is this item made? I just bought the Channellock 6 in 1 screw driver and had I known it was made in China I wouldn't have bought it. | Made in Canada. It's stamped on the red part of the handle. I'm holding it in my hand and use it daily. I hope this helps.Thanks for your American Patronage. |
We got these a month ago. The stakes holding down the back of each goal fell off (the stitching did not hold) What's your warranty policy? | Hi Melissa. This is definitely not normal and covered under warranty so give us a call. |
Can this lens take pictures in lower light than the 18-140mm? | The f/ stop range is the same, so no, the low light performance should be identical. |
Can this lens take pictures in lower light than the 18-140mm? | It wouldn't be either better or worse. That would depend mainly on your apature settings. The 18-140mm allows a weirder zoom range. Your best bet is to find This for cheaper:Nikon 16-85mm f/3.5-5.6G AF-S DX ED VR Nikkor Wide-Angle Telephoto Zoom Lens for Nikon DSLR Cameras |
Can this lens take pictures in lower light than the 18-140mm? | It wouldn't be either better or worse. That would depend mainly on your apature settings. The 18-140mm allows a weirder zoom range. Your best bet is to find This for cheaper: Nikon 16-85mm f/3.5-5.6G AF-S DX ED VR Nikkor Wide-Angle Telephoto Zoom Lens for Nikon DSLR Cameras |
Can this lens take pictures in lower light than the 18-140mm? | if you want a "faster" lens that takes pictures in lower light, you need something like the 35mm f1.8 to achieve this. When the f-stop is opened wider ( for example 1.8 is wider than 3.5), you will allow more light in, allowing you to take pictures at a faster shutter speed depending on what your ISO is set at. |
does this smell like kenneth cole black | no it is very different. I get allot of compliments from CC Reaction. Black is too overpowering to me |
does this smell like kenneth cole black | No it does not, it is lighter and a lot more refreshing/summer like. It is really nice and not that strong. To me, Black is woodsy and this is fruity (grapefruit). |
Will this replacement steel braided probe work on the original Polder Digital Cooking Thermometer/Timer? | Yes, I believe so. This is why I purchased this for myself. But, just to be sure, check to see that this replacement plug - and the original one you own (and want to replace) match. |
Will this replacement steel braided probe work on the original Polder Digital Cooking Thermometer/Timer? | It will work, but the steel braided probe is too sensitive for outdoor grilling. It will not last. My opinion. |
Will this replacement steel braided probe work on the original Polder Digital Cooking Thermometer/Timer? | It will work, but the steel braided probe is too sensitive for outdoor grilling. It will not last.My opinion. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.