query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Can you set desired temp? and wil it cycle off once temp is reached? | Yes you can set the desired temperature and let it go it'll keep the temperature as long as you need it to this thing is unbelievable I wish I would've gotten one along time ago and it does turn off on the temperature is right but it still cycles water. |
Can you set desired temp? and wil it cycle off once temp is reached? | Yes you select the desired temperature and once reached the machine does shut itself off. Once the temp rises to about 3 or 4degrees above desired temp it kicks back on to lower it again. |
Is this the orange gradient or the solid orange? | it is orange and kind of fades to lighter orange at the top but still mostly just solid orange black inside |
Does this tactical belt complement the Condor 241 Molle Battle Belt as the inner belt system? | The dimensions are correct remove the pistol mag pouches and you are good to go |
has anybody tried this for astrophotography/stair trails? Just curious how it works and if theres much coma, etc | I've tinkered with star trails using this lens and I did notice some coma (although it seemed better than my 11-16). That said, with ultrawide lens' general propensity for aberrations, I would expect it to be an issue with any of the lower cost options. However, even my Nikkor 16-35 (as good as it gets) exhibits a little if you are looking for it under the right circumstances, but for trails it is moot. Also, it will depend some on whether or not you get a "good" copy; lens characteristics can vary somewhat between copies, so when I can find a particular lens locally, I'll test a few copies and keep the best one. |
does it swivel to load game intyo the vehicle? | It does swivel right below the crank. It is two pieces (round) top slips over bottom. There is a pin that goes through both pieces to lock in place. I drive with it attached from time to time swung and pinned over the bed of the truck. |
does it swivel to load game intyo the vehicle? | Yes, the hitch swivels so that you can place whatever you have picked up into the bed of a pickup or UTV. It is great. |
I have a really small size head. Do someone think I can fit this cap? | The cap it self is small. It is one size fits all.my 11year old daughter use the red one. |
Viewing distance for the 4661F Is 10.5' far enough away for the 46" screen??? Or should I go smaller to the 42"? | After MUCH watching of this and other 46" and 52" LCDs, IMHO this is the perfect viewing distance for a 46". Others say a 52" is even fine at this distance, but I find that periodically I see things at 10 feet that I don't at 12, so I like 12' for a 52". YMMV |
Viewing distance for the 4661F Is 10.5' far enough away for the 46" screen??? Or should I go smaller to the 42"? | Many suggest that you take a tape measure to a store that sells the 4661 and check the experience yourself. My viewing distance is 7.5 feet and it seemed okay to me. |
Viewing distance for the 4661F Is 10.5' far enough away for the 46" screen??? Or should I go smaller to the 42"? | I have a 46 inch Samsung (4665) and find I am too close at 9 feet. I assume it would be OK at 10.5 feet. |
Is the bulb LED or sunlight? since it emits white light and I searched it out from the sunlight desk lamp category... | It's an LED bulb delivering crisp white light. Whether it qualifies as "sunlight" or full-spectrum is unknown to me, but I definitely recommend the lamp. Outstanding. |
Is the bulb LED or sunlight? since it emits white light and I searched it out from the sunlight desk lamp category... | I choose the red color. very cute. The light is gentle. It is perfect for the kids. I give 5 star for this LED |
Is the bulb LED or sunlight? since it emits white light and I searched it out from the sunlight desk lamp category... | It is a LED with a color temperature of 5000k and CRI if 80. How close that is to "sunlight" is subject to your own opionions, not to mention what kind of conditions you are measuring "sunlight" in (sunlight color temperatures vary with time of day, overcast or not, etc). Clearly no lightbulb gives off true sunlight, or anything all that close to it, despite marketing terms being used to describe bulbs that try to be closer than average. (Some of the differences are good, would you really want a lightbulb that gives you sunburn?) |
what is the weight of the table? what is the weight of the table and bag together? | The table alone is 35 pounds. The accessories sent with the table including the carrying case and straps are at least 12 more pounds. |
do you deliver to a condo and bring it in and set it up and remove box? | This item can be delivered inside and set up. If you will please search for this number on Amazon it will show you this chair with white glove delivery included. The number to search for is B009S2LCHQ |
what color is the case from this vendor? | I bought it in black for my Mother and I and brown for my Dad. I am going to look for another color for my daughter. I love this keyboard! She has her own Ipad but loves to use mine because of the keyboard. She does school work on it 6th Grader in a Advanced School. |
my itouchless lid broke. does anyone know where I can buy the lid for this can without having to buy the whole trashcan? my lid broke and it no longer will open or close. | 2 year warranty is for the stainless steel can body, not the lid unit. The lid unit has one year warranty. The warranty does not cover physical damage or normal wear out. |
my itouchless lid broke. does anyone know where I can buy the lid for this can without having to buy the whole trashcan? my lid broke and it no longer will open or close. | My lid broke as well and I haven't even had it a year yet! I contacted the company and they said they would replace it if I had the receipt. They said I would have to mail the non-working lid to them along with a money order for $9.95 and the receipt. I think it's pretty crappy that I have to pay to ship the lid back to them and pay for them to ship a new lid to me. I have emailed the company my thoughts on having to pay for shipping both ways so we'll see what they say. It sounds like lousy customer service to me. |
my itouchless lid broke. does anyone know where I can buy the lid for this can without having to buy the whole trashcan? my lid broke and it no longer will open or close. | The gear on ours broke also. I think something got wedged in it. It was making a grinding noise when trying to close, and I stupidly pushed the lid down. The whole gear fell in the trash. Maybe if the gear assembly were encased, it wouldn't have gotten clogged with debris? Anyway, I especially miss my automatic lid when I have a handful of gunk to throw away, and it gives me the willies knowing everybody touches the lid with goop on their hands. |
my itouchless lid broke. does anyone know where I can buy the lid for this can without having to buy the whole trashcan? my lid broke and it no longer will open or close. | I think sometimes wet gets in the open button and it sticks. After it dries, it may pop back up and reset. Mine has been stuck a few times and I finally concluded that when I carried the sink stopper over after dishwashing, it dripped on the eye and buttons. |
my itouchless lid broke. does anyone know where I can buy the lid for this can without having to buy the whole trashcan? my lid broke and it no longer will open or close. | There is an ebay seller right now that is giving a 2 year warranty. It's listed under "13 Gal. Touch less INFRARED SENSOR Trash Can- SHIP FREE" You can make a best offer to him and he has very good positive feedback.Sue |
my itouchless lid broke. does anyone know where I can buy the lid for this can without having to buy the whole trashcan? my lid broke and it no longer will open or close. | My itouchless lid broke also after about 18 months. The plastic gear broke off the top and the motor runs but does nothing. In searching so far, I have found this site - http://www.itouchless.com/share/cgi-bin/site.cgi?site_id=itouchless&page;_id=trashcanparts |
my itouchless lid broke. does anyone know where I can buy the lid for this can without having to buy the whole trashcan? my lid broke and it no longer will open or close. | I bought mine quite awhile ago so I do not remember if it comes with a warranty. |
my itouchless lid broke. does anyone know where I can buy the lid for this can without having to buy the whole trashcan? my lid broke and it no longer will open or close. | Thank you. my trash can lid broke in the same way yours did. the motor works but the thing broke that opens and closes it. thanks for your reply. I appreciate it. |
There are two plates. Should they be used for different food items? It didn't come with any instructions, so I'm not sure. | It depends on how fine you what things minced. I only have experience with potatoes, and the larger grate works great. |
There are two plates. Should they be used for different food items? It didn't come with any instructions, so I'm not sure. | The different plates just give you options. I usually use the one with the smaller holes for potatoes when I make gnocchi because I want a very fine, fluffy texture, but the other plate would work well for most applications (mashed potatoes, purées of other vegetables or soft foods.) The ricer is very well made. Good balance, easy to use and clean. Making baby food would be another good use. Experiment to see which plate works better for your texture preferences! |
There are two plates. Should they be used for different food items? It didn't come with any instructions, so I'm not sure. | I think the larger screen is for ricing, the smaller-hole insert for fine straining, as in baby foods. |
if it comes with the wiring connector? | Yes,it is. But I would recommend to ask your mechanic or a Best Buy guy what do you really need for your car. I had to rewire all speakers. Happy anyway. |
Does this work if the car seat is rear facing? | Yes, this is how I use mine. Remember it only covers the width of a regular seat, so if you are using an extended rear facing timeframe for your toddler, he or she may have long enough legs to be able to reach outside of the width of the mat. |
Does this work if the car seat is rear facing? | Yes, absolutely. The back of the mat protects my leather car seat-back from scuffs and dirt from my 1 year old granddaughter's shoes. Love the front pockets. Highly recommend. |
Does this work if the car seat is rear facing? | Yes, we now have two of these, one for each car and our car seat is still rear facing. |
Does this work if the car seat is rear facing? | An answer to a different questions says that it has a strap that wraps around the headrest, so it should stay up. I had the same question and the existing answers didn't really address the mat's ability to stay vertical without a seat pressed against it as it would FF. |
How Wide by how Long are these??? Thanks | Ummm, from the product description...."This package is for 1 seat and includes: 1 Backrest Pad 9"x18" 1 Bottom Pad 9"x15" Pads are approximately 1/32" thick ". |
Is there a chord or is it just battery powered? | It comes with a cord and plug adapters for use in every country in the world in addition to the batteries. |
Is there a chord or is it just battery powered? | hola si viene para funcionar con baterias y con corriente electrica de 110 volts por cierto lo recomiendo muy bien compramos dos y funcionan exelente |
does this contain salt? if so, how much? thank you. | It does contain salt but it is one of the lowest ranked ingredients and does not taste of salt. |
does the smoke stop filter fit the blue air 550E | I don't know. I have the 601. I think the 500/600 refers to the series, so I imagine it would. However, I would call Blueair to confirm. |
does the smoke stop filter fit the blue air 550E | I have a Blue Air AV 501 and use Smoke Stop Filters for 500/600 series. I do not know what that 550E looks like orwhat it takes, sorry. |
does the smoke stop filter fit the blue air 550E | I don't know, I have the 600 Blueair. I just use the regular filters for the 500/600 series. |
Is the 3ft HDMI 2-pack model (HDMI-3FT-2PACK) certified HDMI 1.4? | Dear Customer, Thank you for your question regarding our High Speed HDMI Cable with Ethernet. The cable is HDMI 1.4 compliant and backwards compatible. Please let us know if you have any further questions. Thanks,BlueRigger [email protected] |
Is the 3ft HDMI 2-pack model (HDMI-3FT-2PACK) certified HDMI 1.4? | It doesn't say anything about HDMI 1.4. It says it's the latest version and is ethernet capable. I use it with my smart tv with HD satellite and have been very satisfied. I also use it with another HDTV and HD BluRay player and am satisfied as well. |
Is the 3ft HDMI 2-pack model (HDMI-3FT-2PACK) certified HDMI 1.4? | Hdmi 1.4 is a connection/device spec not a cable spec. ANY high speed HDMI cable will support the 1.4 spec. |
How many quarts will this pan hold and is the central depth to the top edge 3" as stated? | 2 qts. maybe a bit more depending on the substance. yes the depth is 3 inches. |
How many quarts will this pan hold and is the central depth to the top edge 3" as stated? | This All-Clad 12 inch is 3" in central depth from the top edge as measured with my ruler. It holds 3 quarts of liquid up to 1 inch from the edge. Hope my answer is helpful. |
What are the measurements of these items? 12 x 17 or 11 x 17 or 10 x 16 or 12 x 14 ? What are the measurements? | In the product description, the baking sheet says it's 7 inches by 10 inches. The rack can sit inside it. It is a very nice set. |
Most of the "1 star" reviews claim that the phone does not "fit" the grip shell properly. Why would that be? | the open slot in the grip shell for charging the phone is not centered correctly. |
Most of the "1 star" reviews claim that the phone does not "fit" the grip shell properly. Why would that be? | The shell I purchased fits snugly and allows the phone to respond perfectly. I've had no problems. |
Most of the "1 star" reviews claim that the phone does not "fit" the grip shell properly. Why would that be? | the charging place does not fit. You have to pull the shell away from it to allow charging. also the camera lenz is off center |
Most of the "1 star" reviews claim that the phone does not "fit" the grip shell properly. Why would that be? | You have to first remove the original plastic backing on the phone then it fits perfectly. I didn't do this at first and I imagine most people didn't read the directions either :) |
What is the weight capacity?? Are people able to sit on it?? | I'm not sure what the weight capacity is, but two average sized people have sat on my bench, without a problem. |
What is the weight capacity?? Are people able to sit on it?? | We use it to sit on and haven't had any problem. I thought it said the weight limit was 200 lbs when we bought it, but I could be wrong. Regardless, my husband and FIL are both slightly over 200 and sit on this frequently. Hope that helps! |
What is the weight capacity?? Are people able to sit on it?? | Poorly built furniture, stay away and donor waste your money like I did. I tried to fix it to no avail. |
What is the weight capacity?? Are people able to sit on it?? | Absolutely. I use it everyday to put and take off my shoes. My adult son has used it as well - he weighs close to 200 pounds. |
What is the weight capacity?? Are people able to sit on it?? | I'm not sure the total weight capacity but i can sit on it w/o any problems. It is very sturdy |
has anyone used this successfully with an android phone? | MANUFACTURER ANSWER: Thanks for asking! Android versions 4.0 and later have driver built-in to builds from Google- although individual Android device manufacturers sometimes disable this support. Whether driver is left enabled is left up to each device maker. For example, we've found that all ASUS Android tablets (TF200, TF300, TF700, etc) tested to date have support for the driver, however none of the Samsung (Note, Note2, Tab, Tab2) devices we've tested had driver support. Advanced users running rooted devices or custom ROMS like Cyanogen mod aren't supported by Plugable, however may be able to obtain community support from sites like XDA developers. |
has anyone used this successfully with an android phone? | Sorry, no I did not buy it for a phone. I used it on a computer that did not have a port. |
has anyone used this successfully with an android phone? | MANUFACTURER ANSWER: Thanks for asking! Android versions 4.0 and later have driver built-in to builds from Google- although individual Android device manufacturers sometimes disable this support. Whether driver is left enabled is left up to each device maker. For example, we've found that all ASUS Android tablets (TF200, TF300, TF700, etc) tested to date have support for the driver, however none of the Samsung (Note, Note2, Tab, Tab2) devices we've tested had driver support. Advanced users running rooted devices or custom ROMS like Cyanogen mod aren't supported by Plugable, however may be able to obtain community support from sites like XDA developers. MANUFACTURER ANSWER: Thanks for asking! Android versions 4.0 and later have driver built-in to builds from Google- although individual Android device manufacturers sometimes disable this support. Whether driver is left enabled is left up to each device maker. For example, we've found that all ASUS Android tablets (TF200, TF300, TF700, etc) tested to date have support for the driver, however none of the Samsung (Note, Note2, Tab, Tab2) devices we've tested had driver support. Advanced users running rooted devices or custom ROMS like Cyanogen mod aren't supported by Plugable, however may be... » Read More MANUFACTURER ANSWER: Thanks for asking! Android versions 4.0 and later have driver built-in to builds from Google- although individual Android device manufacturers sometimes disable this support. Whether driver is left enabled is left up to each device maker. For example, we've found that all ASUS Android tablets (TF200, TF300, TF700, etc) tested to date have support for the driver, however none of the Samsung (Note, Note2, Tab, Tab2) devices we've tested had driver support. Advanced users running rooted devices or custom ROMS like Cyanogen mod aren't supported by Plugable, however may be able to obtain community support from sites like XDA developers. « Show Less |
Is the lid cat-proof? | I think so. Theirs a indention all around the top of the unit that the lid seats in. |
Is the lid cat-proof? | Well not 100% but I would say yes. There is only a small opening over the light for cats to possibly reach in, however unlikely that may be. Unless your cats lift the lid up and over or reach in at a weird angle it should be fine. |
Is the lid cat-proof? | Not for a clever and determined cat. It simply rests on the top of the aquarium with small plastic feet to keep it from sliding off. |
Is the lid cat-proof? | In general I would say yes..... but as there is an opening directly under the light that a "determined" cat could get his paw in and perhaps pry off the cover.... maybe not. |
Is the color of this item black? It looks almost gray in the picture, just wanted to confirm. | It's a dark black. It's not gray that you may be seeing. You won't be disappointed. |
Is the software mac-compatible? | I think so. I didn't installed them in Mac. But the disc came with it says so. Also, I successfully transferred the videos to my colleague's Mac. |
Is the software mac-compatible? | Yes, it works better on Windows, but is mac-compatible. If I use my mac, I usually upload directly from my memory card to the mac instead of using the camera software. Mac has much better image/video editing software already installed. |
Detecting household mold? | It should, most mold will fluorescent. However I don't think it will work all that well. I might be mistaken, but I believe that any mold on the interior side of drywall should be visible to the eye, and mold in the carpet fibers will mostly be removed by the vacuum cleaner. Its the mold inside of the wall cavity (very common because of poor vapor barriers and failed weather stripping) and under the carpet (in the reinforced webbing and padding) that you wont be able to see at all. You can check the drywall at the seams and edges, and you can leave the carpet un-vacuumed for a couple of weeks, if you have mold then that is the only way you should be able to detect it with UV light. Ammonia and other safer botanical chemicals can be used for the carpet, but the drywall will most certainly be ruined as the mold will be inside of the calcium sulfate substrate. This would definitely work for grout and tile, but the key is that UV light will only cause fluorescence in what the light can hit. |
what is the difference between the kaiman lady swim goggle and the kaimin swim goggle? | They are sized differently. The ladies version fit my eye sockets much better, while the mens version was ok, I got a much tighter seal using the women's fit. |
Would this scope be too large/bulky on a Ruger 10/22. Thanks | I can't tell you about the fit on the Ruger 10/22 because I don't own one, but if it helps just know that it barely works on my Swiss K31. That's with the scope mounted off center and to the right. As for how the scope "looks" on the gun, looks not too big and definitely not small. |
Would this scope be too large/bulky on a Ruger 10/22. Thanks | well I think yes and no. If you need high power scope for a .22 rifle go with it, it is not that heavy and bulky, but I for a plinking rifle I would chose something with less magnification or dedicated scope for .22 rifle. |
Would this scope be too large/bulky on a Ruger 10/22. Thanks | I mounted the 40 on a target rifle with a large stock and I works well and looks fine. I do believe a 32 would look better on a 10/22 which is somewhat smaller than my target rifle. |
Would this scope be too large/bulky on a Ruger 10/22. Thanks | no i do not i nave one on my 10/22, a 3x9x40, and it fits well and looks great, the 12 power is high for a 22, but will give you a great field of viewfor the finer shots you will like it |
Would this scope be too large/bulky on a Ruger 10/22. Thanks | I would say this scope is a bit of overkill for the 10/22, but you could mount it with the correct rings. The magnification on this scope would be good out to at least 400yds and I rarely shoot a 22 past 100yrds. I would suggest this same scope in a 3x9x40 and stick with the Nikon because they are the best for the money. |
Can it also be used as a normal leash too | There is no clip on the end to connect it to a collar. The slip loop goes around dog's neck instead. |
Can it also be used as a normal leash too | Yes it could be used as a normal leash. Just make sure to that it can not go over your dogs head. I would no recommend it to be used as a normal leash if a dog does not walk nicely as it will choke the dog when they pull. |
For a 4 or 6 foot ladder, How much exact height is it giving me off the floor - (I am sure I cant step on that top blue part :) ). | Hi, the top rung is five feet off the ground on my six foot Louisville Ladder :) |
For a 4 or 6 foot ladder, How much exact height is it giving me off the floor - (I am sure I cant step on that top blue part :) ). | we use it outside because it's quite tall- it will get you at least 5 ft off the ground - almost touches the ceiling inside - i recommend you look at it in the store- i think they have them at walmart- we bought it online for the free delivery and we didn't have a truck at that time and it wouldn't fit in our car |
Can these be used on a glass top electric stove? | Yes, I am using these on a glass top electric stove and it is working well. I like these cookware! |
Is this as warm as a good down jacket? | Not as warm but if you put on a sweater and undershirt it will keep you nicely. If you are outside alot in 20 degree weather you would need to put on an extra layer for sure. I bought a polar fleece hood that I wear with my coat and if I have that on I am just perfect with warmth. the hood is really just a wind, snow and rain blocker. My other down coat had a very warm hood and I did miss that warmth, but when I started wearing the fleece hood I know longer missed it and I could see more easily. |
Is this as warm as a good down jacket? | I find it to be plenty warm enough on it's own for work days (in the car before it warms up, walking to and from the car, etc). For outdoor activities I like to layer with a sweatshirt, fleece or sweater for added warm. The slim profile of the jacket vs the huge puffy down made my decision for me. I'm willing to sacrifice a bit of warmth for the reduced bulk. |
Is this as warm as a good down jacket? | I was very warm during 4 and 5 degrees temperatures in Paris. I think layers would be needed for freezing temperatures eg fleece coats sweaters etc. |
Is this as warm as a good down jacket? | I find it as warm as a medium fill down parka, but not quite as warm as a really high fill sub arctic rated down parka. It serves me well pn MOST winter days, all but the most frigid (below zero ) |
How high from the ground is the seat on this chair? | A little bit higher than a normal sand chair, it is a good buy compared to others. |
How high from the ground is the seat on this chair? | Obviously, depends on position of chair (4-5") from seat to sand, allowing you to lay out or sit up. Optimal for beaches as well as yard chairs. Love mine. |
How high from the ground is the seat on this chair? | I would say it was a comfortable height off the ground. I had no problem getting out of the chair. I returned it because of other isssues. |
How high from the ground is the seat on this chair? | 4 inches from sand. Not too high. Think it is a normal height. I don't like my chairs high at all.But to me it is very heavy. . This year I did buy a lighter chair from a store near me.I have some back issues and this chair is not for me. I love the chair, made well. And love the canopy. Best for a man to carry. |
Anyone use this for a shotgun? Looking for good (not overly big scope section, wide, etc.) soft bag for 28" Beretta A300 shotgun (50" total length) | Chris, I use this for a 91\30 mosin nagant without bayonet which is probably at least 30 inches if not more. I feel fairly confident that it could handle a 28 inch shotgun. I could fit my Remington 870 in it if it didn't already have a bag. Hope this helps. |
Does this include the brushed nickel pipe that comes out of the wall and the shower head threads onto? | It's been a while since I installed this but I don't believe it does. Any home supply store sells that pipe though.Kelly |
Mac OS 10.7.x compatable???? | Yes its 10.7 compatible, here's the link to the drivers. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=48&PFid=48&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true#RTL8188RU |
Is this waterproof? I'm guessing not due to USB need to use on the water. | I would say absolutely not. The USB port is open with no shielding. The battery compartment has a gasket but not sufficient for any type of submersion. This unit would not be waterproof- might even be stretch for water resistant. |
Is this waterproof? I'm guessing not due to USB need to use on the water. | just resistant...not waterproof...it uses a rubber o-ring around the battery compartment but that's about it...hope this helps |
Is this a pair (2 sleeves or 1) | My order came from a company called "Clever Training". It was pictured and described as a pair. I did NOT receive a pair. I received 1 sleeve. I would not order from "Clever Training" again. Amazon gave me a refund. Amazon deserves 5 stars. Clever Training deserves 1 star. |
Is this a pair (2 sleeves or 1) | The item that I purchased is a PAIR...although you can purchase single items. |
i want to connect electric plugged in charger to car battery and connect converter to car battery same time then plug coal stove into converter as a | What are you attempting to do? Does your coal burning stove have a blower you want to power? If so, charge your battery to full charge; remove it; hook your converter up to the battery and plug in your stove to the converter. When the "juice" is gone, charge up your battery again and start the process over. You could alternate with a second battery if you have access to one. What I don't understand, is how you will be powering the battery charger if you don't have electricity to power your stove blower (If I understand you correctly). I assume from your post, that English is your second language. If so, you need to re ask your question, as it was difficult to understand. And, please, do not attempt to do what you were asking about. You could end up killing or seriously injuring yourself. |
How many rings does this item have? | It has 3 rings. You can use paper and planner with more rings. I did and it works just great. |
how wide is the top opening of the bag? Will it fit the "Paragon stainless steel Popcorn scoop" sold on Amazon? | I can't give actual dimensions, but we have a large popcorn scoop and it works okay with it. Personally, I think these would work with about any sized scoop unless you had an extra large scoop. Look at the dimensions of the bag, that might help you. |
how wide is the top opening of the bag? Will it fit the "Paragon stainless steel Popcorn scoop" sold on Amazon? | Bag measures 3.5" across. We use the scoop that came with our popcorn machine (Great Northern Roosevelt 6010) so I don't know if the Paragon scoop will work or not. I actually prefer the 2 oz. popcorn bags...the 1 oz. bags are really small. |
Does the box interfere with sirius XM radio reception when it is close | I haven't had any problems with XM reception while using my Thule cargo box. |
Can I use an umbrella or other modifier instead of the softbox on these? | As far as my knowledge goes, not without custom mods made to attach them. However anything is possible with a little creativity and effort. |
I noticed some scratches on the tip when I opened it up, is there anything I can do to make the toy usable? Or will it need to be trashed? (unhappy) | Contact the seller. Use the recent orders to find out who you purchased it from |
Are there any lights in the brim or are they all under the brim? | It's been a while since I've used mine, but I think there are lights in both places. It's a great hat but since I've had it, I've found other lights that put out way more light. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.