query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
can I purchase an insulated carrier and does it have a good seal on the lid? It needs to travel long distances. | The lid just sits on top. No real seal to it. I would go for the insulated carrier if you are going very far. |
can I purchase an insulated carrier and does it have a good seal on the lid? It needs to travel long distances. | It doesn't have good seal on the lid when you are cooking. If you have liquid inside the pot, it will come out while traveling. I used it to cook bone soup for my dogs and water is flying all over my counter and even inside the stainless tub. I bought it because it's cheap. |
Will this protect me from a shotgun sound? I plan to use earplugs and this for extra protection. | This will help reduce the sound further especially if you plan to use it in conjunction with earplugs. I use custom molded earplugs plus these muffs. It reduces the amount of sound significantly. I used to only wear the plugs but now I use both. Protect your hearing with these (and plugs)....you'll appreciate it in the long run. |
how easy is it to assemble the trainer? | it is as easy as simply positioning the bike, turning a couple cranks, adjusting the tension wheel for the size of bike wheel and then getting on and riding the bike. I am a 67 year old grandmother who set it up in about seven minutes! |
how easy is it to assemble the trainer? | Very. It's just a matter of adjusting the large screws to make sure the rear wheel is secured into position. The "switch" that you use to adjust the level of resistance is attached to a long cable so that you can attach it to your handlebars. Just make sure the cable is out of the way while you're peddling. We usually wrap the cable around the frame once or twice and that works just fine. |
how easy is it to assemble the trainer? | It comes with instructions that are easy to follow. I didn't have any trouble with the assembly. |
how easy is it to assemble the trainer? | The instruction sheet is poorly written; the description of parts changes now and then; there is no explanation about how to keep the cord (not long enough) away so it doesn't potentially interact with wheel or pedals; there is no final picture of installed with bike; one part must be assembled (tools included); the actual product is not as pictured on the description; it would be difficult for a woman to have the wrist strength to tighten the tension screw or the frame adjustments to hold the bike. Must be a very capable 67 year old grandmother who did it in 7 minutes. |
how easy is it to assemble the trainer? | There are 4 screws that screw permanently into the plastic of the, I don't know what it's called, the spinney wheel thing. That was it, it was assembled otherwise.Wrangling your bike into the big giant screws that hold it in place is easy once you've done it before. |
what voltage does it use? | I can't find mine right now so not 100% sure, but I used it in the US with no problem. |
what voltage does it use? | It is 100v 800w but we use it with 120v and it works fine. It says to only use in japan but I know from experience (lived in japan for 4 years, recently returned to america) many japanese appliances work just fine in america. The only thing you have to be careful of is they seem to cook to fast, i don't know if that is due to the higher voltage or if it is just the takoyaki pan but we just turn it off every now and then so it isn't quite as hot. |
what voltage does it use? | I dont know the voltage but I had no problems using it in any socket in my kitchen (Baltimore, MD) |
Is this compatible with Linear Multi-code 3089 remotes? | Yes, all Linear Multicodes with 10-dip switches are compatible. They just look different because of size preference, sun-visor type, handheld type or keychain. You just need to have either the code or a unit that is currently working, open the cover and match the toggle switches. (on/off in up or down position.) Takes about 2 minutes to set up. The 3060 works best for me because it's small and cheap. |
What is the assembled height? | The top of the bar that the folders hang on is 9 and 3/8 inches high, the assembly screws make the highest point an even 9 1/2 inches. |
I'm seeing mixed reviews on the finish. Can anyone confirm if this product is a shiny chrome, as described, or if it is more a brushed, flat metal? | I think it's more of a flat metal. Mine is not too shiny around the edge just the mounted part. I recommend this mirror! It's easy to tilt too. |
Will this store fishing hot spots ? | hi there yes it can, you can store up to 3000 waypoints and label them. thanks from Maple Leaf GPS |
Will this store fishing hot spots ? | I haven't had time to use my Mark4 yet on the water. I got this unit for my kayak. But you can store 3000 way points on it. Mark your fishing hot spots with a icon they give you to choose from. I've only use this unit in the simulation mode for now, very easy to use. |
Hello I have an optoma hd26 projector 3D full and wanted to know if these glasses are for use with the projector or if there are others. Thank you | Sorry for the delayed response but I just set up my projector a few days ago. Yes these glasses are great! |
Hello I have an optoma hd26 projector 3D full and wanted to know if these glasses are for use with the projector or if there are others. Thank you | Yes, it should work because it's DLP technology. Works great with SBS 3D movies. I actually think the depth is great. Alternatively, you can look up EStar America ESG601 DLP Link 3D Glasses. It looks and works exactly the same, except it doesn't have the Optoma logo on the glasses, of course. The Estar is cheaper by $13. |
Hello I have an optoma hd26 projector 3D full and wanted to know if these glasses are for use with the projector or if there are others. Thank you | depth is not like theaters, but is good for effects. The images don't come at you with clarity. But for the money, work ok ! |
I jus scored an Alienware R4, wondering if this would be feasible to buy. I also want to compliment it with an i7 extreme cpu. My first barebone build so I want to get this rig right. Think I might get a backup power supply just in case. Plan on pushing this Aurora R4 to its limits playin Aion. I jus scored an Alienware R4, wondering if this would be feasible to buy. I also want to compliment it with an i7 extreme cpu. My first barebone build so I want to get this rig right. Think I... » Read More I jus scored an Alienware R4, wondering if this would be feasible to buy. I also want to compliment it with an i7 extreme cpu. My first barebone build so I want to get this rig right. Think I might get a backup power supply just in case. Plan on pushing this Aurora R4 to its limits playin Aion. « Show Less | I don't understand, did buy an overpriced Alienware and now want to gut it and put different parts in it? Or did you just get an Alienware case? |
I jus scored an Alienware R4, wondering if this would be feasible to buy. I also want to compliment it with an i7 extreme cpu. My first barebone build so I want to get this rig right. Think I might get a backup power supply just in case. Plan on pushing this Aurora R4 to its limits playin Aion. I jus scored an Alienware R4, wondering if this would be feasible to buy. I also want to compliment it with an i7 extreme cpu. My first barebone build so I want to get this rig right. Think I... » Read More I jus scored an Alienware R4, wondering if this would be feasible to buy. I also want to compliment it with an i7 extreme cpu. My first barebone build so I want to get this rig right. Think I might get a backup power supply just in case. Plan on pushing this Aurora R4 to its limits playin Aion. « Show Less | I don't know what type of video card you got with the system. The answer is probably. You'd swap out the existing card or use the open slots on the mother board. You should verify you have the correct slot for the card. Second, I have an i7. It's freaking great!!! But you need fast memory to go along with it. If your system doesn't come with good gaming memory, then upgrade that along with your i7. It will cost about 40 bux to get kick ass memory, Google gaming memory for options. |
does this include all the colors ( LARGE BLACK, BLACK, yellow, magenta,cyan) | Yes it includes all the colors, large black, black, yellow, magenta and cyan |
Trying to figure how difference between this M57 vs the M53 ? Any ideas? Going to use it in a sump pit. Thanks | Yes the bottom plate is cast verses poly (plastic), great pump, I love it. No one can beat the price. |
Trying to figure how difference between this M57 vs the M53 ? Any ideas? Going to use it in a sump pit. Thanks | I don't know the difference. If one model is newer than the other, go with the newer model. Zoeller pumps are high quality. I have never had trouble with any Zoeller pump. |
Trying to figure how difference between this M57 vs the M53 ? Any ideas? Going to use it in a sump pit. Thanks | I don't think there is any size difference, so if one will fit your sump pit, the other should fit also. |
Trying to figure how difference between this M57 vs the M53 ? Any ideas? Going to use it in a sump pit. Thanks | M57 appears to have a larger capacity, is heavier (more metal parts I believe). I switched from the M53 to the M57 with no problem in the sump pit in my basement. I figured the bigger capacity might make it last longer. Both are very quiet and efficient. |
Trying to figure how difference between this M57 vs the M53 ? Any ideas? Going to use it in a sump pit. Thanks | I believe the only difference is in the construction. The M57 is a little more heavy-duty. As far as I remember, the entire 50 series moves the same volume of water. I think the model you choose is based more on the application. If the pump is going to be in harsher environment, you'd probably be better off with the M57. |
will these fit the 'DW 713' also | Yes. According to Dewalt site it is designed to work with DEWALT DW703, DW706, DW708, DW713, DW715, DW716, DW717, DW718, and DWS780 miter saws. |
what is the difference between the dc65 and dc65 animal? | The color and the animal comes with two additional attachments: a Dyson Tangle Free Turbine and a Dyson Soft Dusting Brush.Dyson Tangle Free TurbineDyson Soft Dusting Brush |
what is the difference between the dc65 and dc65 animal? | This has already been answered. With the more expensive one there are a couple more attachments. |
what is the difference between the dc65 and dc65 animal? | The color and the animal comes with two additional attachments: a Dyson Tangle Free Turbine and a Dyson Soft Dusting Brush. http://www.amazon.com/Dyson-Tangle-Free-Tool-Turbine/dp/B008SH85J0 http://www.amazon.com/Dyson-49-Soft-Dusting-Brush/dp/B000ANHPIW |
How often do you need to change the water? | I usually clean ir about once every week and a half. I usually just rinse out the bottle and then refill as needed, maybe once a week. |
How often do you need to change the water? | I change it once a month. I have 3 cats and 1 dog. Fill up the tank every other day. |
How often do you need to change the water? | If you mean totally clean it out, I would say it depends on your water. I clean my every month and rinse my filter once a week. (At least I TRY to clean the filter once a week.) |
How is the drum? Looking for a baby drum that lights up and makes ONE drum noise per hit. Thank you. | I was disappointed in the drum. It says the color showing but not a drum noise. |
How is the drum? Looking for a baby drum that lights up and makes ONE drum noise per hit. Thank you. | The drum noise isn't very loud but it is not a single noise either. I don't think it is obnoxious though. My 19 month old son prefers the toy set at the music setting and when you hit the drum it plays a cute song and you here the drum as a background for it. The lights flash when the drum is hit. I hope that helps. |
Is this too good to be true? | Yes and no. For some reason not all of my magenta cartridges will work. Other ones so far are working |
Is this too good to be true? | I was extremely happy with these. Really good price and they were compatable |
I understand the dashboard mount sits nicely in place. I got that. But, how is the Tom Tom mounted/fastened to the beanbag mount? | You need to use the suction cup mount which came with your TomTom GPS and attach to the round disk in the middle. |
I understand the dashboard mount sits nicely in place. I got that. But, how is the Tom Tom mounted/fastened to the beanbag mount? | I mount my TomTom to the dashboard mount using the Windshield Suction Mount that came with my TomTom. |
I understand the dashboard mount sits nicely in place. I got that. But, how is the Tom Tom mounted/fastened to the beanbag mount? | Dash mount has impermeable surface which "suction cup mount" adheres to. This allows easy movement from mount to windshield and vehicle to vehicle. TomTom GPS units typically come with plastic disks which can be glued to surface of dash for a more permanent mounting location. Because you are still using the factory "suction cup mount", you can easily move from vehicle to vehicle. Note: On newer vehicles, the windshield mount location makes viewing and operating the GPS more difficult. An on-dash location improves usability of unit. |
my opening appears to be 29.9 inches do you think this will fit | Yes, it will fit. My opening was 30" and there was enough room on both sides. Great range hood and I highly recommend. |
can these lights be put on a dimmer switch, for ambience ? | Hi... Right out of the box these lights have a nice ambiance. They're only 11watts so they're not so bright and make a perfect light for an outside sitting area. I've got a fifty foot cord of these going across two awnings of my camper. I'm thinking of getting another set up for my backyard as well. They've been great and haven't lost a single bulb in two camping seasons so far. As far as using them with a dimmer switch I would say yes since they're normal incandescent bulbs. |
can these lights be put on a dimmer switch, for ambience ? | I believe that all filament based bulbs (not LED or CFL) can be put on a dimmer. So yes, you should be able to put these on a dimmer. However, they are not very bright to begin with, so not sure you'll need to dim them. |
is ram memory upgradable? | Yes it is! There's 4GB on the motherboard, and 4GB or 1 SODIMM that's upgradeable, so you can get up to 12GB (4GB + 1x8GB) 1600MHz MAX. Hope this helps, thanks! -XOTIC PC |
Why does it say there are 6 ingredients, but lists 29 ingridients on the package. They lie to you on the package, what else are they lieing about? | I recently switched to this brand for my American bulldog. He has a LOT less gas and no longer sheds. On his old food he would shed so bad I would sweep it up in piles. I will definitely keep buying it. |
Why does it say there are 6 ingredients, but lists 29 ingridients on the package. They lie to you on the package, what else are they lieing about? | There are only 6 main ingredients, the other items are all vitamins and minerals supplements to aid in the healthy balance of your dog. True it should say 6 plus vitamins and minerals to be technical, but it is not lying in the sense there are only 6 main items in the food vs. some other brands. Even higher end natural dog foods, like Natural Balance and Blue Buffalo, have added supplements along with their short list of main ingredients. |
Why does it say there are 6 ingredients, but lists 29 ingridients on the package. They lie to you on the package, what else are they lieing about? | My pit has allergies. No eggs, chicken,turkey, peanuts etc. You are right, 6 ingredients, bs. I gave this dry food to a neighbor. His dog has no allergies. I stay with Natural Balance, duck & taters, & venison & sweet taters. No problems with her eating. |
Why does it say there are 6 ingredients, but lists 29 ingridients on the package. They lie to you on the package, what else are they lieing about? | also remember only 20% protein. Most high quality dog foods are 28% or higher protein content. |
Has anyone had a problem with the batteries not charging? not sure if its a vacuum problem or a battery problem | So far we have had no problems with the replacement batteries. We use the vacuum several days a week, so they are being charged quite often. |
Has anyone had a problem with the batteries not charging? not sure if its a vacuum problem or a battery problem | Is this a new vacuum or are these replacement. If new vacuum make sure the charging switch is not turned off. I believe it is by the dust compartment. If they are replacement batteries and are new either they are not connected right or defective |
Has anyone had a problem with the batteries not charging? not sure if its a vacuum problem or a battery problem | If you just replaced the batteries with new ones. Go into the neato menu. Select "support" then Select "new Batteries" and put it on the charger. This option lets the Neato know to recalibrate how to read the power level of the batteries and charge. see if that helps. Otherwise, try plugging the charger directly into the port on the back of Neato and see if they charge that way to rule out that there is not something wrong with charging base itself. |
Has anyone had a problem with the batteries not charging? not sure if its a vacuum problem or a battery problem | They don't stay charged for more then 1/2 hour on a full charge, but they do charge |
Do these require a carrier sheet, or do they feed directly into the printer? | They feed directly into the printer. I've never had a problem with them - super easy to use. |
What volume is each ink bottle, 8 onuces? | They are 4 oz jars. The kit is a great way to get enough to do small projects. If you get more into printing. I suggest buying a bigger white and black. I use the small ones as tints and for small things. I do a lot of bigger pieces. But these are great for mixing small amounts |
are these like the normal tennis balls? I am a beginner and want some regular inexpensive tennis balls to practice with. Don't need name brands. | Yes - normal tennis balls that we got for our dogs. Great balls for tennis though. |
are these like the normal tennis balls? I am a beginner and want some regular inexpensive tennis balls to practice with. Don't need name brands. | The felt is much cheaper than normal balls and wears out quickly. If you dont hit hard you should be OK. |
are these like the normal tennis balls? I am a beginner and want some regular inexpensive tennis balls to practice with. Don't need name brands. | That's exactly what they are! I buy them for my dogs just because they are nuts about tennis balls, but yes, just normal tennis balls. Other people answered their tennis suitability better than I could though. |
how long is this leash? | way to short~~I'm use to the 18ft. retractable ones.I'm sticking with them. |
Does this light have a 3 prong electrical plug or 8 prong? | I don't remember what the connector looked like, but it was a direct plug in replacement for the factory Bosch headlights on my 2000. |
can the roadster 2 transmit so i can play it from my cell phone through my car radio | Yes, you can play music from your phone over your car radio. It has worked very well for me. |
can the roadster 2 transmit so i can play it from my cell phone through my car radio | Yes, you are able to transmit phone calls, Pandora, and other music libraries, etc all through your car radio. |
can the roadster 2 transmit so i can play it from my cell phone through my car radio | Yes it took me a little bit to figure out how, but then simple. It doesn't sound as good and crisp like the wire we can use from phone to AUX though. So I do not use it for music. |
can the roadster 2 transmit so i can play it from my cell phone through my car radio | Yes it can. It tells you what channel to tune to. However it's not great reception. Usually staticky. |
will this hammer fit my Springfield 1911? | It should fit any mil spec model provided you use a beaver tail grip safety as well. |
will this hammer fit my Springfield 1911? | Yea it will fit. Do you have a beaver tail on your Springfield? If you don't you will need to get one. The Springfield 1911 a1 government issue didn't come with a beaver tail that's why I'm asking. If you have a newer model with a beaver tail you will be fine. |
will this hammer fit my Springfield 1911? | I have a Remington 1911 government model and it fit perfectly. No gunsmithimg and it actually feels smoother than the stock hammer! |
will this hammer fit my Springfield 1911? | you'll need a beavertail grip safety to use this spur hammer. I dropped this thing in and, unexpectedly, it improved the smoothness of my trigger pull greatly. |
will this hammer fit my Springfield 1911? | zombie skin, I don't know for sure if it will fit your springfield 1911 but I don't see why not, the hammer dropped right in to my tisas 1911 made in Turkey. no problems and operates just fine. you will need a beaver tail for the hammer to go all the way back |
will this hammer fit my Springfield 1911? | It fit my Remington R1 1911 with the help of a gunsmith, I believe it required some modification. My 1911 is a government model not commander, so if your 1911 is of government model dimensions you can most likely use it, though with or without the aid of a gunsmith is hard to say. |
is there a carry strap or any type of handle to carry this | No strap. But it's possible to link your arm through the two metal arms, when it's in a folded position. |
is there a carry strap or any type of handle to carry this | There is a handle at the top of each arm that makes it a snap to carry. It is so light....I love it! |
is there a carry strap or any type of handle to carry this | There is not. It's so light that you really don't need one but that's not a bad idea and if you're handy you could rig one pretty easily. I'm really pleased with how light the chair is. |
is there a carry strap or any type of handle to carry this | There isn't a carry strap. The chair folds and is very light weight. You can carry it with one hand. I don't feel inconvenienced by it. |
is there a carry strap or any type of handle to carry this | No there is no strap.I am tall so I put my arm through the back and carry that way.Might not be great for a petite person.It is a nice, durable, attractive, well made and comfy chair though |
is there a carry strap or any type of handle to carry this | No, there's no strap or handle. It's easy enough to put your arm through the opening under the armrests. (The seat bars move up and there's plenty of room.) You can also rig a carrying strap if you really want. |
will it hold 750 mil. bottles | Wayne, Yes, we dry wine bottles in it. Works very well. Even, 1.5 liter bottles. You just can't fit as many at a time. Greg |
will it hold 750 mil. bottles | It will hold the bigger bottles but you have to skip a hole between bottles. There is a version of this designed for the bigger bottles. |
Please can you give me a list all devices included with the purchase of the tablet? | Is this device working 100%,is this device screen have any fractures or scratching |
Please can you give me a list all devices included with the purchase of the tablet? | The Surface Pro comes with its charger and the pen and nothing else. The keyboard and all other accessories are a separate buy. Hope this helps! |
Please can you give me a list all devices included with the purchase of the tablet? | Sure! It includes:- Microsoft Surface Pro 2- Pen- Windows 8.1 Pro (installed on the device)- 48W AC Power Supply |
Please can you give me a list all devices included with the purchase of the tablet? | Just the tablet, the pen, and the charger. If you want a cover or keyboard, they are separate. |
I want to use it for gaming. Does the converter effect response time, or case any lag more than 1ms? | I use this for my component only hdpvr. The response time is fine on 360 :) |
On an iPod, can you use headphones and a powered monitor at the same time. I'm a drummer and have an audition and need to hear the track through headphones while the auditioners hear the music through the powered monitor. Will this work? On an iPod, can you use headphones and a powered monitor at the same time. I'm a drummer and have an audition and need to hear the track through headphones while the auditioners hear the... » Read More On an iPod, can you use headphones and a powered monitor at the same time. I'm a drummer and have an audition and need to hear the track through headphones while the auditioners hear the music through the powered monitor. Will this work? « Show Less | It works splitting my laptop audio with my headphones and powered amplifier with my audio equipment. The volume control on the splitter works well for the headphones. |
On an iPod, can you use headphones and a powered monitor at the same time. I'm a drummer and have an audition and need to hear the track through headphones while the auditioners hear the music through the powered monitor. Will this work? On an iPod, can you use headphones and a powered monitor at the same time. I'm a drummer and have an audition and need to hear the track through headphones while the auditioners hear the... » Read More On an iPod, can you use headphones and a powered monitor at the same time. I'm a drummer and have an audition and need to hear the track through headphones while the auditioners hear the music through the powered monitor. Will this work? « Show Less | Yes you can as all the splitter does is split the output into two separate stereo outputs, so if you connect head phones to one and the input of your monitor to the other it will work flawlessly. I run a similar system here one output to headphones and the other to a Creative powered subwoofer speaker system and I have not had any problems. |
On an iPod, can you use headphones and a powered monitor at the same time. I'm a drummer and have an audition and need to hear the track through headphones while the auditioners hear the music through the powered monitor. Will this work? On an iPod, can you use headphones and a powered monitor at the same time. I'm a drummer and have an audition and need to hear the track through headphones while the auditioners hear the... » Read More On an iPod, can you use headphones and a powered monitor at the same time. I'm a drummer and have an audition and need to hear the track through headphones while the auditioners hear the music through the powered monitor. Will this work? « Show Less | Yes! Obviously you'll need to dial back the output on the one that goes to the powered monitor. RCA->1/8inch stereo cable should do the trick. |
On an iPod, can you use headphones and a powered monitor at the same time. I'm a drummer and have an audition and need to hear the track through headphones while the auditioners hear the music through the powered monitor. Will this work? On an iPod, can you use headphones and a powered monitor at the same time. I'm a drummer and have an audition and need to hear the track through headphones while the auditioners hear the... » Read More On an iPod, can you use headphones and a powered monitor at the same time. I'm a drummer and have an audition and need to hear the track through headphones while the auditioners hear the music through the powered monitor. Will this work? « Show Less | I doubt it. You have a single input with the same input split into two outputs. |
can you please tell me all of the dimensions? | Unit is 13 1/2 inches tall but when you flip up the water fill lid that increases overall height to approx 17 1/8 inches at tallest point. Unit is widest at the back approx 8 1/2 at widest point. Unit is approx 11 inches deep at base front to back. Filter/ coffee holder swings out to the right and uses Melitta # 4 cone filter or you can use mesh filter that comes with it. With basket out total width increases to about 14 inches. |
Can you use a hand held shower head with this filter? I would like to continue using my own shower head but am not sure if a hand held would attach ri | Yes you can..mine is hooked up to a hand held shower head..we got an adapter from home depot |
Can you use a hand held shower head with this filter? I would like to continue using my own shower head but am not sure if a hand held would attach ri | I can't see why you couldn't. One part of the filter attaches to the shower pipe coming out of the wall. Then you would attach the end of the hand held shower head to the front part of the water filter. |
Can you use a hand held shower head with this filter? I would like to continue using my own shower head but am not sure if a hand held would attach ri | I just looked at my set up. I have the pictured shower head and we also have a hand held. I don't see anyway this would connect to my hand held shower head. There may be some that would ave a regular screw on feature like where this filter connects to the pipe from the wall but it would not work on mine as it is not set up to make that attachment. |
Home depot says this model has 60,000 btu's. Is it 38,000 or 60,000? | Weber's website says it's 38,000. I'd trust that source more than HD. See: http://weber.com/grills/series/genesis/genesis-e-330 |
Home depot says this model has 60,000 btu's. Is it 38,000 or 60,000? | The 3 main burners supply 38,000 btu. The additional sear burner supplies 10,000 btu. The side burner for a sauce pot or pan supplies 12,000 btu. So in total it is 60,000 btu but neither Amazon nor the Weber company web site list it collectively. |
Home depot says this model has 60,000 btu's. Is it 38,000 or 60,000? | my answer would be --"refer to Weber's specs, and go with that, after all they, (weber) did design and build the grill. I an super happy with my new grill(weber). |
Home depot says this model has 60,000 btu's. Is it 38,000 or 60,000? | The 3 after the E designates it's in the 30K family so 38,000... 60K is a massive grill and are named E-6XX |
Home depot says this model has 60,000 btu's. Is it 38,000 or 60,000? | We purchased our online from amazon with free shipping and I believe it is 60k. |
What length--in inches--is the medium ball launcher mentioned in the description? | Diameter of Ball is 2 1/2 inches as it states in desc. My Kyjen Launcher is approx. 26 1/2 inches in length and not made with this Amazon ball purchase so I can't answer your launcher question. |
How many are there in 1.5 pounds? | A lot. Between 200-300. And they were very delicious! Not like a lot of the tasteless gummies |
How many are there in 1.5 pounds? | I counted them and there were 174 gummies in my 1.5 pound bag. the crocs/alligators were almost 2" long and about ½" wide. |
How many are there in 1.5 pounds? | it was a while back and I used them in gift bags...so I know at least 30...but not much more. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.