query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Are gaskets included? | Yes gaskets are included I bought pump also and it had all gaskets and housing bolts |
When is worked with 2 cameras, two of them record video, or one record video and the other snapshot? | I did not buy the 2 cameras to just work with the 1 device but I am pretty sure when I was setting it up that it showed you the ability to have the 2 screens (1 main and 1 mini) for both video. We got a little $30 camera that worked amazingly well. (was going to have the same set up in 2 locations and have not gotten around to it yet) |
When is worked with 2 cameras, two of them record video, or one record video and the other snapshot? | With two cameras, two of them will record video. Consequently, it the setting is on snapshot, then it will take snap shot pictures. |
Can this holder handle the bigger fat rolls of towels? | I use the large rolls and it works great. I am very happy with this purchase. |
Can this holder handle the bigger fat rolls of towels? | We use the medium large rolls in this holder and it does fine. Once husband came home with a large roll and it scraped the under side of the cabinet, but was workable, until the roll became smaller. Hope this helps. |
how many days for shipping. | It varies depending on what address we ship to and which shipping method you select. You should see the shipping time frames when you checkout and place your order. |
Can insulation be place over this unit? | Yes. This fan is rated for direct contact with insulation. Being a fluorescent bulb, it does not generate very much heat... |
Can insulation be place over this unit? | We recently installed this unit and the installation guide says" loose fill or batt insulation can be placed directly over the fan housing in the attic" |
Can insulation be place over this unit? | According to their website, Panasonic states you can place loose fill or batt insulation directly over the unit to prevent heat from escaping. I would confirm that with your installer, however, or contact customer support at Panasonic. These are great units and I'm about to buy more of them. |
does anybody know, why some goose down comforters reccomended for dry cleaning only and some are allowed to wash/dry? | Actually, I would not recommend the washer at all. I think it would ruin the down inside. We often grab the bottom of the comforter and "whip it" to get the down redistributed back to the top of it. I would dry clean it only. |
does anybody know, why some goose down comforters reccomended for dry cleaning only and some are allowed to wash/dry? | Dry clean only, I've never stuck mine in a washer but I can imagine the mess it would be if I did it! The down would probably shift and and the cover might shrink. I always "refresh" mine by putting it in the dryer with a dryer sheet and set the temp to perm. press for about 20-30 minutes. |
What is the width of these chairs from it's two widest points? | arms are 20" across, top of seatback to front of chairseat 20" deep, seat 15" square, feet of legs are 18" apart - side to side and front to back. |
Would this tank make a suitable koi quarantine tank? | I belive it would . Depending on there size . Some reviews said there's leaked mine I'm not sure I'm using 4 as planters . Also I'm not sure about since it's galvanised steel if this would affect the fish ? |
Would this tank make a suitable koi quarantine tank? | Not sure, would investigate fresh water interaction with galvanized metal and the affect on the fish. |
Would this tank make a suitable koi quarantine tank? | I would think so, Dana, as long as it were located out of direct sun; I'd worry about the water temperature in that case. Otherwise, it should work fine for your purpose. |
Would this tank make a suitable koi quarantine tank? | It would hold water, that's for sure.My husband and I removed all the stickers, primed, painted, and placed ours in raised stilt-like cradles .... they look nice as raised planters and would LOOK nice as Koi tanks too .... but as the other respondent wrote, I would investigate before purchasing. |
Would this tank make a suitable koi quarantine tank? | Yes, this would work as a Koi tank. Plenty of people use these galvanized tanks as outdoor ponds, including me, with much success. I currently have turtles, gold fish, and a Koi thriving in mine. The issues lie with rust and aluminum oxidation which neither should occur on a galvanized steel tank. Hope this helps. |
Would this tank make a suitable koi quarantine tank? | Sorry, i know nothing about what would be appropriate for koi. It comes to my knee, not sure how deep it would need to be? It came in good shape and i'm using it as a planter. |
Would this tank make a suitable koi quarantine tank? | I don't see why not. Certainly depends on what it is you require. I use for tortoise habitat and it works well for that. Obviously different than your potential use. |
Does the deflector fold (for storage)? | yes the deflector folds in half to become 24 x 14 inches to store in trunk. |
Does the deflector fold (for storage)? | Yes it folds pretty easily and comes with a storage bag When not in use. Great price and product |
Does the deflector fold (for storage)? | Yes it does. I remember receiving the product in a folded format. Unfortuneately I cannot get it back to that position. I have discarded the instructions because I am a male that feels they are unnecessary in life. You see where that has got me. |
Does the deflector fold (for storage)? | It breaks down by folding. First in half and then to quarters and fits neatly into a excellent storage bag that has no problems fitting into the trunk. I caompare mine to the dealer there is no difference except the price. It makes a world of difference in how the wind effects you and a passanger. I love mine. |
Does the deflector fold (for storage)? | Yes it folds, and is shipped in folded format. I have been pleased with my deflector. Be sure to Read the instructions to feel comfortable installing, opening and closing the deflector. |
what are the pocket dimensions of the product ? inside height at opening and inside height at closed end? | It doesnt really matter because they stretch pretty good.. so it if you think ur rifle might be to big it will be just a perfect tight fit. |
what are the pocket dimensions of the product ? inside height at opening and inside height at closed end? | I can't get to the item at the moment, I can tell you that it's EXTREMELY elastic. Mine looked like it was too small for my shotgun, but I was able to get it in place without too much trouble, and it stays very securely. |
How do I chose the stain color I want? | You can't choose on this listing - you get whatever they happen to have. To get the stain color of your choice type into the Amazon search bar: Ash B00G8JRAM8, for Black Walnut B00G8JRANW, for Cherry B00G8JRANM, and for Oak B00G8JRAN2 |
Has anyone purchased a bottle with the black spray nozzle that doesn't reach the very corners to get all of the perfume to the last drop? | They changed the bottle design and formula away from the original and it is not near as good as the orginal to our regret and sadness |
how long is the cord ? | about 5 feet (short) like the others said. It's great if your computer is a Desktop (slimline) or Laptop. |
Can you use a stylus with this protector? I forget which brand it was where the manufacturer recommended against it. | Works perfectly with my Friendly Swede Stylus. Great screen protector and a great price. |
Can you use a stylus with this protector? I forget which brand it was where the manufacturer recommended against it. | Definitely can use a stylus. No scratches on the protector when using the stylus too. |
so am I better off ordering the small size reusable inserts for the one size CB? | I ordered both, at night we had to use the big size and smaller size to get thru the night and as they grow your going to need the bigger size. Hope it helps |
so am I better off ordering the small size reusable inserts for the one size CB? | From day 1 I mixed up the inserts and they all work the same. After a few hours just like a disposable, u had better change the diaper. The large size will serve u better for future use. |
so am I better off ordering the small size reusable inserts for the one size CB? | I got CB Tutti Frutti medium size and they came with inserts. I bought extra m-size inserts so I can use two inserts for a nap time. Now I have to many unused inserts. But good thing about CB diapers they are a very good quality. They look like new after more than a year of use. I am planing to reuse those with my second child. |
so am I better off ordering the small size reusable inserts for the one size CB? | We use CB one size and I ordered extra med/lrg inserts. They are good as doublers for night. I actually use them w our Bumgenious 4.0s as doublers. CBs tend to leak at the legs when doubling for night. I do use the osMed inserts along w a osSm insert for normal use now that my son is 24lbs. That is working great for us w minimal leaks. CB is a good diaper but Bumgeniuos 4.0 is a fabulous all around diaper day and night. |
Does it fit Holmes Model 1840? | It does. In the product description, it shows the following. Wick filter fits Holmes HM1800, 1840, 1845, 1850, 1851, 1855, 1865, 1888, 1889, 1895, 1975, 2059, 2060W, 2090, 3000, 3850 Note: 3800,3850 needs 3 fltrs, 4000 needs 2 filters (HWF-65); Sunbeam SCM1895, 1896, SCM1866 (SF206); White-Westinghouse WWHM1840 2090ZE (WWH650); GE 106609, 106663, 106763; Bionaire BCM-1845, 1855 |
Where can u get them warranty at | I warrantied Mine through my local Matco tool truck but they weren't happy about it so good luck. |
Where can u get them warranty at | I work as a tech and Matco will take them in and warranty them for me.If that's not something you have access to is imagine contacting the seller in which you purchased them from and send it in and wait. |
Where can u get them warranty at | I know that the 3 major auto tool makers like Matco, Snap-on and Mac Tools will warranty for you because they're also a big distributor for Mountain tools. As Matthew Mines said, you can get them warrantied by your local tool truck guy, but they ain't going to be happy about because they don't get anything out of especially so if you didn't buy it from that guy directly. |
Where can u get them warranty at | I work as a tech and Matco will take them in and warranty them for me. If that's not something you have access to is imagine contacting the seller in which you purchased them from and send it in and wait. |
Where can u get them warranty at | The warranty is lifetime it is from were you purchase ( Amazom) it. Them have a very good service and response is almost immediately. They are awesome. |
What is diameter of the venting hose? Is it 17.2" deep? Can it be vented out a wall? | Here is the web site for the air conditioner.http://www.edgestar.com/Koldfront-Ultracool-8000-BTU-Portable-Air-Conditioner-PAC801W/PAC801W,default,pd.html |
What is diameter of the venting hose? Is it 17.2" deep? Can it be vented out a wall? | Here is the web site for the air conditioner. http://www.edgestar.com/Koldfront-Ultracool-8000-BTU-Portable-Air-Conditioner-PAC801W/PAC801W,default,pd.html |
What is diameter of the venting hose? Is it 17.2" deep? Can it be vented out a wall? | I'm not sure what to tell you but far as I know it is equipped for a regular size window. |
how high is when you finish?, i have a gundam 1/144 and is around 20 cm tall, this one says 1/35 is much bigger or almost the same? | I would say its around 5 inches whan you finish. Its a little bit taller than the average Robot Damashii figure. But this model does not hold as well as the past Code Geass model kits, although it has a lot of accesories. |
how high is when you finish?, i have a gundam 1/144 and is around 20 cm tall, this one says 1/35 is much bigger or almost the same? | It was about the same when I built it. But then again, the size of the Alexander in the show is also smaller than most mechas I believe. |
Is there a difference between the Melt Roller and the OPTP Pro roller? | I dont know about the OPTP brand but I have gone to MELT classes with certified MELT instructors. They explain that you can use another brand roller if you like but the MELT roller is especially made for their exercises with just the right amount of resistance and comfort. I would recommend the MELT roller- it is very well made with good materials (smooth, not breaking down, no plastic-y odor) and comfortable to work with. Good luck! |
Is there a difference between the Melt Roller and the OPTP Pro roller? | No not really. I purchased the complete MELT Method because it was more convenient for me. They are the same size and made of the same material. |
Is there a difference between the Melt Roller and the OPTP Pro roller? | Yes, there is a difference between the melt roller and the optp pro roller. the melt is a little smaller and feels firmer. They both do the same job and i like them both. |
Is there a difference between the Melt Roller and the OPTP Pro roller? | The opts is only foam it will not provide you with the support of the melt roller. Buy the balls and roller from melt method. Amazon charged me $100 for the balls only. |
I'm on my second bottle, and this time around the tablets have a strong smell/taste- kind of like rubbing alcohol or something. Is this normal? | The tablets in my second bottle did not have a smooth coating - hard to sweallow - chalky taste.I contacted Swanson and they recommended I contact NOW FOODS. |
I'm on my second bottle, and this time around the tablets have a strong smell/taste- kind of like rubbing alcohol or something. Is this normal? | I had the same problem on a bottle I ordered back in May 2014. They didn't have the right coating and tasted so bitter/sour that I choked on one. I still have the bottle because it was too late to return them but I might try calling the manufacturer for a replacement. I just stopped taking them. |
I'm on my second bottle, and this time around the tablets have a strong smell/taste- kind of like rubbing alcohol or something. Is this normal? | No... No strong odor of any kind should be evident. Check seal date and storage conditions and do not take pills if they show signs of discoloration, dampness or tampering. |
I'm on my second bottle, and this time around the tablets have a strong smell/taste- kind of like rubbing alcohol or something. Is this normal? | I also just received my second bottle. They don't have any strong smell or taste, they are just like the first bottle. I think I would ask for a replacement if the smell/taste is that noticeably different, that doesn't sound right. The lot number on my bottle is 1708335 1236 and use by date is 03/2019. Hope that helps! |
Can this be assembled without the keyboard tray? Thanks! | I received an email with a follow up question, asking if the desk would look weird without the tray, as if something were missing, but I don't see it on the page anywhere. The answer is no, the desk will not look weird without the keyboard tray. There are two metal rails (used by the slide out tray) that hang down from the underside of the desk but you can skip the installation of those if you are not going to use the keyboard tray. |
Can this be assembled without the keyboard tray? Thanks! | I guess it should be OK to remove the tray under the table. It doesn't seem to play any important role of stabilizing the table. Assume the purpose of removing tray is to gain more knee space (+ 3 inches). With tray installed, you will have 26 inches knee space under the table. If that's not your purpose, I would say leave the tray in. |
Can this be assembled without the keyboard tray? Thanks! | Yes, there's no need to install the keyboard tray if you don't want to as it doesn't provide any structural support. |
is there a maximum number of handsets that can be paired with the base? | I dont know. Best to go to the Panasonic web-site and check there. Also they keep changing models, so check for the correct model. |
is there a maximum number of handsets that can be paired with the base? | I use 4 handset and it work well. According manual the base can be paired 6 handset. |
How many pint jars can be used at a time | I have never canned anything, so I don't know. If you take 50% of 10 quarts (20 pints) you have 10 pints, and allowing extra room for the jars would suggest 6 to 8 pints. That should leave adequate empty space for the pressure to build and the canning process to be successful. Perhaps someone else could give a better answer. |
Hello I purchased these and as much as the kids like them I am afraid to use them again. I run a daycare and they stained and left a glue residue on my highchair trays. I tried everything even goo be gone and it wont come off. Any ideas?? Hello I purchased these and as much as the kids like them I am afraid to use them again. I run a daycare and they stained and left a glue residue on my highchair trays. I tried everything even goo... » Read More Hello I purchased these and as much as the kids like them I am afraid to use them again. I run a daycare and they stained and left a glue residue on my highchair trays. I tried everything even goo be gone and it wont come off. Any ideas?? « Show Less | Olive oil or a non-stick cooking spray should remove the glue residue on plastic furniture. |
Hello I purchased these and as much as the kids like them I am afraid to use them again. I run a daycare and they stained and left a glue residue on my highchair trays. I tried everything even goo be gone and it wont come off. Any ideas?? Hello I purchased these and as much as the kids like them I am afraid to use them again. I run a daycare and they stained and left a glue residue on my highchair trays. I tried everything even goo... » Read More Hello I purchased these and as much as the kids like them I am afraid to use them again. I run a daycare and they stained and left a glue residue on my highchair trays. I tried everything even goo be gone and it wont come off. Any ideas?? « Show Less | Hmm maybe contact the company. I have had mine for some time now and they are still good and don't stick to anything. They might have shipped some that weren't good. Try to contact them because it says they don't stick or stain in which mine haven't yet and I've had ours for a while now. See if there is anyway u can contact the foam company and let them know your concern. Hope it helps! |
Hello I purchased these and as much as the kids like them I am afraid to use them again. I run a daycare and they stained and left a glue residue on my highchair trays. I tried everything even goo be gone and it wont come off. Any ideas?? Hello I purchased these and as much as the kids like them I am afraid to use them again. I run a daycare and they stained and left a glue residue on my highchair trays. I tried everything even goo... » Read More Hello I purchased these and as much as the kids like them I am afraid to use them again. I run a daycare and they stained and left a glue residue on my highchair trays. I tried everything even goo be gone and it wont come off. Any ideas?? « Show Less | Mine didnt stained anything. I don't remember having any trouble with residue either. I stopped using it because I couldn't keep it out of babys reach. She liked to eat it. Contact company and ask? |
i recently bought a heating pad and it has a switch that you have to hold i am looking for one that automaticlly turns off by itself | Model number 155 has an automatic 20 minute timer. Check out ASIN B000ZHJS0G. |
Does it fit on 2012 Camry SE? Thannks | It fits on my 2010 Camry LE perfectly. Use the check fit engine Upper Left section of page on amazon to see if it works with your car. It will ask you for the year, model, engine type and trim of vehicle before answering if it fits. |
What is the minimum kibble size for this feeder? The cat mate c3000 is hard to find and they are asking $150 for them. This is $100 cheaper. | I use it to feed my small breed(poodle size) food is 1/4". Will work with any size smaller and up to 1/2" size. A little complicated to set up. My dogs learns how to get food out with ther paws. I modified with a longer tube and fixed the problem |
The manual says not to use in temps. below 40deg. Anyone using it below 40 degrees? If so, how is it? | We live in WA state where the temps vary. So far, with all types of temp, we haven't had any problems. |
The manual says not to use in temps. below 40deg. Anyone using it below 40 degrees? If so, how is it? | It has gotten into the 20's in mid Georgia this winter. The tub has never had any issues. Do make sure you clear any water from on top of the cover, especially in colder weather as this will leech the heat extremely quickly. |
The manual says not to use in temps. below 40deg. Anyone using it below 40 degrees? If so, how is it? | I use it below 40 with no problems. It generally only heats up to 102 when it's really cold. It cools pretty quickly if you use the jets. It's pretty awesome in general. |
The manual says not to use in temps. below 40deg. Anyone using it below 40 degrees? If so, how is it? | I returned mine because it wasn't keeping 102 temp even at above 40 degrees ambient temp. I returned it for a refund but got stuck paying the shipping cost back which was very expensive. |
The manual says not to use in temps. below 40deg. Anyone using it below 40 degrees? If so, how is it? | No, I use mine in the mountains of Panama. It only gets to 40 degrees a couple of times a year. Hopefully someone will have experience with colder temps that last for longer periods of time. |
is it really led or not | It's an LED but the seller refuses to send me the inverter which was supposed to come with it. |
is it really led or not | No, these are not LED light strips, they are cold cathodes. If you've never seen one before, it's kind of like a small fluorescent light tube. |
is it really led or not | It is not an LED. It uses a gas discharge principle like a Neon sign. The tube gets slightly warm. |
Can this spread dry Peat Moss? | I've never tried spreading any kind of peat moss, so I can't honestly answer the question. However, my opinion is that the dry peat moss would probably bunch up in the spreader and not drop. |
Can this spread dry Peat Moss? | If it's granular enough yes, otherwise you may need to enlarge the drop holes a little. |
Would a medium one fit on a Honda VFR Interceptor 2003? | When I ordered this item I had to choose from the drop down menu - Year - Make - Model which tells you the size for your bike. I have a Honda Rebel which is 250 and it just fits. Pick the exact bike from the info. required and it should fit, I don't know the cc of your bike |
will this work on trac phone want to transfer my account on to this phone . has to be 3g cdma only and verizon . anyone know or no a phone that will | Yes...but with experience with this phone...I would suggest u look into a newer model.this 1st Gen galaxy had a phantom button press that I believed to be factory issue.unless u root n install custom rom...u may be able to correct issue some.i personally enjoyed this model as my first android product...it'll open the doorway to modern smartphones and their capabilities if u let it. |
Size of hole on the base plate? Is the hole right thru the plate? What is the white stick? | Base plate is 5/8 inch threaded hole completely through it and the white "stick" is actually a sleeve to cover excess threads on the buffer if there were any. |
Size of hole on the base plate? Is the hole right thru the plate? What is the white stick? | The white stick is to center on your buffer. 1/2 inch hole goes all the way through. |
Size of hole on the base plate? Is the hole right thru the plate? What is the white stick? | The hole goes all the way through you can use the white tube to center the buffer.Once centered the product is great to use. |
Size of hole on the base plate? Is the hole right thru the plate? What is the white stick? | Yes the hole goes all the way through and it's about 3/4" wide. The white tube goes in the hole in the pad to center it on the buffer |
Can I make this in a regular coffee pot? | That would be like putting instant coffee grounds in the coffee pot. ..you could, but why? I just mix a tablespoon or so in hot milk/almond milk or water. Eazy peezy! |
Can I make this in a regular coffee pot? | No, Dandy Blend is like an instant coffee. You just mix it with hot water. No brewing necessary! |
Is this made in the USA or China ? | I think this tough high quality piece of art is made in china, but I'm not shure. |
does it have memory card | I believe it has minimal built in memory - about 16mb. You can write to the card, or to the built in memory for a few pics only. |
does it have memory card | Have not owned this camera for some time...Do not recall if it has a memory card.. |
does it have memory card | The camera did not come with an SD memory cad when I owned it. You can buy one at any electronic store. I often used a 16 GB class 4 SD card. |
Is it water resistant? | Sorry I'm not sure I returned it before testing it out outside in the elements. It's a beautiful jacket though! |
Is this the 2", 3", or 6" arm length? | The below link states the overall lenght to be 6.75, each ball/diamond mount extends .75 inches from the arm and the suction mount is 1.75 leaving the arm to be 3.75 inches, which is what mine measures. Hope this helps.http://www.rammount.com/SearchResults/tabid/38/searchBy/description/criteria/082065077045066045049054054085032/Default.aspx |
Is this the 2", 3", or 6" arm length? | The below link states the overall lenght to be 6.75, each ball/diamond mount extends .75 inches from the arm and the suction mount is 1.75 leaving the arm to be 3.75 inches, which is what mine measures. Hope this helps. http://www.rammount.com/SearchResults/tabid/38/searchBy/description/criteria/082065077045066045049054054085032/Default.aspx |
i have a vortex sparc 2 will it line up with a absolute cowitness hight? | Stay away from this magnifier. It will only last a few months and it'll fall apart on you. Made in China. Save your money and get something of better quality. With optics, you get what you pay for |
Do all 12 outlets on this rosewill power surge block rhsp-13007, provide power surge protection? do it have a resettable circuit breaker? | i think they are all surge protected yes and yes there is a resettable circuit breaker |
is the fabric thick? I'm using it for my pet guinea pigs bedding | It was used for a double thickness throw for my granddaughter. It keeps her warm and is very soft. |
So when the description is a "one pack" is that one, singular orb for $15.99? That seems very pricey for one solar light. | No...there are three lights in a "one-pack"...go figure. We have had ours for a little over a year...they no longer work. I'm hoping my husband can fix them. I bought two "one-packs" and have 6 in my back yard. |
So when the description is a "one pack" is that one, singular orb for $15.99? That seems very pricey for one solar light. | I just received my order today for the 1-pack for $13.27; I received one globe not three. |
Is more long the 20"??? | since our hair extensions are basically handmade, the length of each set may vary a little bit with the range of 21.5" to 22.5". Customers may trim off a little bit ends when they wear them, so we safely list the length as 20" to 22". |
I want to know if it works with Dell Inspiron N5010-about 3.5 years old? | I have the same Lap Top. It works fine in mine. It is a little harder to push in than the original battery but fit good. You have to get use to the ridge on the bottom. It is not flat like the one you have now. Works better on a table but you will notice it in you lap. Mine works fine. Would buy again for the cost factor. |
I want to know if it works with Dell Inspiron N5010-about 3.5 years old? | Yes it does. The only differanxe is that the battery when installed is a little higher in the back so when you place it on a flat service it's on a angle which I found actually better posture wise for typing. Excellent battery life. Make sure you turn off your computer completely before installing the new one. I hope this helps. |
I want to know if it works with Dell Inspiron N5010-about 3.5 years old? | Better than original. Higher capacity, nicely shaped to tilt keyboard at slight angle. Fits perfectly. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.