query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Does this mount come in 2 pieces, a wall mount and TV mount so they can be slipped together for easy lite weight install | It comes as one piece. With two people its fairly easy. I lifted the tv mount in place and my wife marked the holes. Then we pre drilled the holes. Put the top bolts first then bottom, tighten all bolts and hang TV on it. Hope this helps |
Does this mount come in 2 pieces, a wall mount and TV mount so they can be slipped together for easy lite weight install | This wall mount system is 2-pieces. The graphic illustration shows only the wall mount portion. Inside this mount system is a kit for the tv mount portion. It basically consists of 2 individual t.v. mounts, for even support of tv, and a hardware kit that contains different size hardware to accomadate several tv manufacturers mounting hole size. The two individual tv mounts also contain a feature to change the angle of the tv after mounting the tv to the wall mount. This feature is for different tv height mounting (higher tv = greater adjustment of this). After attaching the tv mounts to the tv, you simply lift the tv w/mounts and attach to wall mount. |
What are the dimensions of the case (both open and closed)? | Open is 8.5" x 6.375", Closed is 3.25" x 6.375". Keep in mind that it is a soft case and you could "scrunch" it up when closing to make it a little narrower if needed. |
What are the dimensions of the case (both open and closed)? | closed 16 cm wide x8.5 cmx 2 cm thickopen 16 cm wide x 22 cm total fold out open dimension |
How well does it work? | I used it to reupholster 6 dinning room chair seats and it jammed several times and did not completely sink the staple 50% of the time. I ended up using my old mechanical stapler with much better results. Might do well on soft pine, this was wood composite. |
How well does it work? | It is strong enough for most tasks, designed pretty well for use, but after a week the staples got caught underneath the sliding part that is supposed to move them forward and nothing we tried would fix that.So, while it doesn't jam, it also does not work. Wrote Arrow,got no response, but called the phone # in the instructions and was requested too send it back for repair or replacement by the person in charge.Have not done that yet, but think there's hope,after all. CV |
How well does it work? | Do not buy a refurbished on, get a new one, got mine and it did not work, sent it back!!!!! |
How well does it work? | it works very well strong stapler. the lazor a gimmick do !i used it to re-deck my pontoon boat . fasten foam and vinyl to the new helm I also built . i was very happy with it. mine was a brand new unit and have used it for other projects no problems. |
How well does it work? | It works fine for light duty work. If you are stapling into a hard material you have to hold it down firmly or the staple won't sink in all the way. |
How well does it work? | I used it for reupholstering a chair, using medium weight upholstery fabric. There were no jams and it was powerful enough to staple 3 layers of fabric. Would probably not do well on heavy weight fabric, except for a single layer, but was great for the job I wanted it for. |
Does it come with Pre-programmed RR Freqs? | Ranges yes, for specific to your area, you are better off programming them for filtering purposes. |
do I have to get an air compressor to operate this gun | Yes, you can buy a small inexpensive one for 50-60 $$ and that will do the job for just about any small air tool. |
do I have to get an air compressor to operate this gun | Umm, seriously? Hello? Air powered tools require compressed air. Duh If you have another source of compressed air other than an air compressor, go for it. |
do I have to get an air compressor to operate this gun | Yes. I can't use mine because I don't have one. Its still in the box it came in because I didn't realize that's what pneumatic meant. |
Is it big enough to hold a regular sized hammer? | Not really. You might could squeeze one in there but it would be nearly impossible to get it out again without removing everything else first. |
There are 2 very different photos. Is this one with sleeves though the arches as shown in one? | I don't know I didn't buy the one with the sleeves bought the one with the straps for the four arch frame. |
Can you give me a copy of directions for use? | Pour 1/2 tsp of water into each section of the egg poacher.Break one egg into each section of the poacher.Center the yolk and pour 1/2 tsp of water over each egg.Lightly pierce the white and yolk of the egg several times.Cover with lid and cook on MEDIUM-MED/HIGH for apprx 30 seconds per egg. (4 eggs = 2 minutesMonitor cooking every 15-30 seconds.Stop microwave when the eggs are slightly softer than desired ,and let stand for 30 seconds before opening the lid.Egg will continue cooking. |
Can you give me a copy of directions for use? | I no longer have the directions, but what I do that works is put 1/2 teaspoon of water in each well, add the eggs, add another 1/2 teaspoon of water on top of each egg, puncture the yokes a couple of times with a fork, then microwave for 30 seconds per egg. Adjust time according your your oven's power. |
Can you give me a copy of directions for use? | Hi Jane,I just put 1/2 tablespoon of water (and a small dab of margarine ) in each of the 4 cups.Then I break the eggs and put one of them in each of the 4 cups.Then I put the lid on it and microwave it (on high power) for 90 seconds.Then I remove the eggs from their cups and eat them!Delicious! :-) |
Can you give me a copy of directions for use? | Pour 1/2 tsp of water into each section of the egg poacher. Break one egg into each section of the poacher. Center the yolk and pour 1/2 tsp of water over each egg. Lightly pierce the white and yolk of the egg several times. Cover with lid and cook on MEDIUM-MED/HIGH for apprx 30 seconds per egg. (4 eggs = 2 minutes Monitor cooking every 15-30 seconds. Stop microwave when the eggs are slightly softer than desired ,and let stand for 30 seconds before opening the lid.Egg will continue cooking. |
Does this have the redesigned mesh cover that allows air through and preventing the cover from blowing off? | I don't know what the cover was like prior to my 3/25/2014 purchase. The one I received works perfectly with my 45 gallon rectangular wheeled tote. I've only used it four times as I purchased it at the beginning of spring, 2014 and vacuumed leaves from areas I just couldn't get to with my rake last fall. The cover never blew off. The seams are sewn so that they form a rectangular shape and then flares out into a circle. The two ridges (holds the tote top in place) on my tote makes it easy to place the cover on top, tighten the cover below the bottom ridge with the provided cord. I don't use anything else to hold the mesh cover in place. It's well made, the mesh allows dust and air through while adhering to the tote. Fall is here. No doubt I'll have plenty to write over the next eight weeks or so. Stay tuned for my update. |
Does this have the redesigned mesh cover that allows air through and preventing the cover from blowing off? | I don't know about a redesign, but I've used this item to to fill a 50 gallon barrel about two thirds full of leaves and it never blew off. There is a rope to fit around the barrel below the lip and a draw string type of clamp to cinch it snug to the barrel. Hope this helps. |
I have a 17 year old washing machine. The trunnion is rusted solid to the shaft. Will this product penetrate severely rusted parts? | Metal Rescure has to be able to penetrate whatever metal it's going to clean. Furthermore, the metal has to be submerged into Metal Rescue liquid. Although the directions call for 24 hours of submersion, 48 hours is necessary. Also, it does not cure metal that has been corroded. Your shaft sounds iffy to me. Hope this helps, Fred |
I have a 17 year old washing machine. The trunnion is rusted solid to the shaft. Will this product penetrate severely rusted parts? | I don't think so. I used it on a gas tank on my motorcycle and it only took off the surface rust but not the think stuff. I soaked it for two days but no luck. Hope this helps you. |
Is this compatible with a Droid Incredible 4G LTE smart phone? | Just to add to John Tyler's answer, the sound quality of this bluetooth headphone is fantastic! |
aspire one 8.9 in Extended Warranty Does it pay to buy an extended warranty and if so, for how long and with who? | Usually not worth it. Many credit cards will double your warranty at no cost. |
To switch to the iPhone, does the iPhone have to be connected directly to the Pyle PRT35I using a wire, or can you use the iPhone remotely? | The I phone have have to be connected, keep in mind that does not work with I phone 5 |
sorry but i don't understand the difference in the selection program loop: what it means "off" or "2 minutes" or "5 minutes"?? | Hello! If you are talking about the 'loop recording' setting, from the menu, I can help you. The options I have when choosing 'loop recording' are off, 1 minute, 2 minutes and 3 minutes. I do not have 5 minutes displayed there. If you choose off, the camera will record a video file until the memory from the micro sd card will be filled, then stop. For the other 3 options, it will record video files of 1, 2, or 3 minutes duration and when the memory is full it automatically erases the oldest video file on the memory card, so you don't have to erase anything manually in order to be able to record more, once the memory is full. I hope this was helpful. Hori. Hello! If you are talking about the 'loop recording' setting, from the menu, I can help you. The options I have when choosing 'loop recording' are off, 1 minute, 2 minutes and 3 minutes. I do not have 5 minutes displayed there. If you choose off, the camera will record a video file until the memory from the micro sd card will be filled, then stop. For the other 3 options, it will record video files of 1, 2, or 3 minutes duration and when the memory is full it automatically erases the oldest video file on the memory card, so you don't have to erase anything manually in order to be able to... » Read More Hello! If you are talking about the 'loop recording' setting, from the menu, I can help you. The options I have when choosing 'loop recording' are off, 1 minute, 2 minutes and 3 minutes. I do not have 5 minutes displayed there. If you choose off, the camera will record a video file until the memory from the micro sd card will be filled, then stop. For the other 3 options, it will record video files of 1, 2, or 3 minutes duration and when the memory is full it automatically erases the oldest video file on the memory card, so you don't have to erase anything manually in order to be able to record more, once the memory is full. I hope this was helpful. Hori. « Show Less |
sorry but i don't understand the difference in the selection program loop: what it means "off" or "2 minutes" or "5 minutes"?? | with looping...If you select "off".. the camera will record until all the memory is used on your card, at which point the camera will just shut off. if you select 2 minutes... the camera will record continuously for 2 minutes at which point it will make a file at the end of 2 minutes. then the camera will make a new file for another 2 minutes and just repeat the process until all the memory is used on your card. once it is all used the camera will take the oldest file and just record over it. This is the same process if you select 5 minutes. Its best to have it record on a loop for 2 or 5 minutes, I use 5 minutes. That way the camera will always record as along as it is turned on. I hope that helps. with looping...If you select "off".. the camera will record until all the memory is used on your card, at which point the camera will just shut off. if you select 2 minutes... the camera will record continuously for 2 minutes at which point it will make a file at the end of 2 minutes. then the camera will make a new file for another 2 minutes and just repeat the process until all the memory is used on your card. once it is all used the camera will take the oldest file and just record over it. This is the same process if you select 5 minutes. Its best... » Read More with looping...If you select "off".. the camera will record until all the memory is used on your card, at which point the camera will just shut off. if you select 2 minutes... the camera will record continuously for 2 minutes at which point it will make a file at the end of 2 minutes. then the camera will make a new file for another 2 minutes and just repeat the process until all the memory is used on your card. once it is all used the camera will take the oldest file and just record over it. This is the same process if you select 5 minutes. Its best to have it record on a loop for 2 or 5 minutes, I use 5 minutes. That way the camera will always record as along as it is turned on. I hope that helps. « Show Less |
sorry but i don't understand the difference in the selection program loop: what it means "off" or "2 minutes" or "5 minutes"?? | I don't remember already all options.. the main idea of recording with loops is to keep files rotating. The oldest file in case there will be no more space to write new one should be deleted.. Files should be orginized somehow and have appropriate chosen lenght of time.. "2 minutes" setting means that their max time will be 2 minutes each.. Shorter lenght - smaller each file size. I don't know what does it mean "off".. CAn only guess that you will write the only file (memory card size is the limitation), without rewriting (looping) old information. |
sorry but i don't understand the difference in the selection program loop: what it means "off" or "2 minutes" or "5 minutes"?? | It's the setting for the length of the video files. It's generally accepted a shorter length like 2 mins is preferred because this ensures with higher probability that a video file will be saved to memory in the event the camera loses functionality as the result of an accident. |
sorry but i don't understand the difference in the selection program loop: what it means "off" or "2 minutes" or "5 minutes"?? | Every 2min or every 5min the video breaks into another file. No real difference. |
Will this background fit a tank that is 36" L x 13" W x 24" H? | No, I don't think so unless you can get very creative. This background is only 18" high |
Will this background fit a tank that is 36" L x 13" W x 24" H? | I don't think so. It would fit the 36 length but not the 18 inch height. But I do there are different sizes available on amazon. |
Does it pour nicely, without being messy? I have trouble with another Bormiolo that doesn't pour nicely. | Not great, the lit is also too tight and hard to remove and put on. The container for ice is too small, ended not using it. |
Does it pour nicely, without being messy? I have trouble with another Bormiolo that doesn't pour nicely. | Yes, you have to be very careful in pouring I have had it work just fine and other times (when I am in a hurry) it can get messy. Sorry! |
Does it pour nicely, without being messy? I have trouble with another Bormiolo that doesn't pour nicely. | Make sure the lid is snapped on tightly and it is fine. I used it once without the lid and it left a mess. |
Do the magnets affect GPS running apps on phones? | I used my running for 2 hours this past Saturday and it didn't affect my GPS app at all. I love this thing!!! |
Do the magnets affect GPS running apps on phones? | I have used Map My Run a few times and I haven't noticed any problem. But I haven't been paying that close of attention. |
How is the lampshade attached: spindle sort or the drum sort? | There is a harp that clips around the bulb, and an upwardly protruding screw on top of the harp. There is then a brass spindle that screws down onto the harp-screw. The spindle needs tightening fairly often, in order to avoid a swiveling lampshade. If this is not clear, ask me again. : ) |
How is the lampshade attached: spindle sort or the drum sort? | Actually I don't know what you mean! But----the lampshade is attached by squeezing in the 2 spindle type things and setting them in the slots and sliding a little cover down over them. Hope this helps! |
How is the lampshade attached: spindle sort or the drum sort? | I am sorry but I really don't understand the question. The shade is a typical lamp shade that you put on the harp and then fasten it with a screw on cap. Hope this is what you are looing for. |
Where can I order the cushion from? | Don't know where you can get the cushion, but I suppose it would be very easy to make one out of outdoor rated canvas or sunbrella material. I use it without cushion and find it very comfortable and attractive that way in my garden. |
Where can I order the cushion from? | You can get any cushion, with any shape, and size at http://arizonacustomcushions.com i totally recommend it |
Where can I order the cushion from? | No cushions are available. Make a template of the seat using cardboard and take it to an upholsterer. At least you can choose your own fabric. |
What if the tire broken? | The tires a perfectly good to me they r 700x25 they feel like plastic at first but after a few rides they look feel and ride normal |
is it worldwide shipping | We are set up for global shipping, however, have had some technical issues lately we are solving. |
how deep are the pockets on the fitted sheet? | The pockets are real deep. but the fitted sheet is not wide enough for my queen size mattress. |
how deep are the pockets on the fitted sheet? | There is a good amount of room. I have a pillow top King and don't have issues with it coming off. I'd consider it standard depth. |
how deep are the pockets on the fitted sheet? | They do not fit on a bed with 15" corners by at least 3". Too, the size that I needed, and purchased, (Cal King) was dimensionally too small and could not be stretched to fit. Given the poor quality of the fabric that I experienced they wound up tearing at the seam so I've given all sets to charity with hopes that they can find a use for them. FYI, I've since purchased Veratex sheets and they are great; yes, they're more expensive but I could have saved money if I'd have bought them in the first place. |
how deep are the pockets on the fitted sheet? | They measure 13". I would NEVER buy these sheets again. In addition to the pillow case edges fraying prematurely, now the binding on the fitted sheet is tattered (and the fit on them was never even tight). These sheets are not that old, were not inexpensive and are ready for the rag bag. |
I bought this and the readings show higher than my other monitor. Has anyone else experienced inaccurate readings? | Agreed. Brought to my Doctor's office and consistently were anywhere from 5 to 20 points higher. |
I bought this and the readings show higher than my other monitor. Has anyone else experienced inaccurate readings? | My diastolic pressure was consistently 5 or more mmHg higher. I'm just going to get used to it. Systolic numbers were the same. This is compared to a cuff by Withings, which may be inaccurate instead. I don't know. |
I bought this and the readings show higher than my other monitor. Has anyone else experienced inaccurate readings? | I have been getting high readings, quite a bit more than at my doctor's office.This has really irritated me since I bought it! I noticed the cuff is a medium adult, with an arm circumference up to 16 1/2 inches. What we need is a large cuff for most adults, I take BP readings on my patients and usually use a large cuff. My arm is not very fat and it measures 16 3/4 inches, so this is too small for me and especially my 6'2" husband! I have looked to see if there is another cuff I can buy to replace the medium one and have not found one on Amazon. |
I bought this and the readings show higher than my other monitor. Has anyone else experienced inaccurate readings? | NO........... My average BP readings (130/80) were within two points of my doctor's readings (132/81). Make sure you have sat a while before you take your reading. Also make sure your legs aren't crossed when taking BP. |
I bought this and the readings show higher than my other monitor. Has anyone else experienced inaccurate readings? | YES -- mine reads CONSISTENTLY 15 to 20 points higher than at my doctor's office or on my old monitor. I hate it and am returning it!!! |
I bought this and the readings show higher than my other monitor. Has anyone else experienced inaccurate readings? | No, our BP readings with this monitor are very accurate and the same as the doctor's monitor. Excellent machine! |
I bought this and the readings show higher than my other monitor. Has anyone else experienced inaccurate readings? | The readings on mine are pretty right on. You should bring it to your doctors office on your next visit and compare it to their reading right at that time. |
Does this work with the dremel 290? | Yes. It's made for the 290 dremel. It replaces the bit the 290 comes with it better bit. |
I have the original model, will these fit? | I don't know about the original one. I've had my rotadent about 2 years and have gotten the replacement short brushes twice and had no problem . As you see I really love them. Hope you do to. |
I have the original model, will these fit? | The one that I have does not fit the older models. I was kind of upset when I found this out being they cost so much money. The shape of the end of the handle is a little different. One is round and the other has kind of a triangle shape. Unless of course you don't have the same kind as I have. Mine is a Rotadent Plus Zila. I'm not really crazy about it, but then I don't think there are too many things made as dependable as they were a few years ago. |
I have the original model, will these fit? | Hi, Horsehappy, I know for sure that the tips I got from them will only fit the new model. I know the old brushes still exist; not everyone has the new model. I don't know where you are, but my dentist in Studio City CA has a bunch of the brush tips for the old Rotadent. Also, if you can , why don't you ask the company I bought the new brushes from if they have a supply of the one for the old model. P.S. I don't know what I'd do without my Rotadent. I've been using them for a lot of years. My dentist office phone number is 818 763-1444. Good luck. |
are they 2 ply or 3 ply? | Well, it's not like you can peel apart the layers, there's only one but it's good and thick and sturdy. I'm going to guess its 3 ply. |
Do you sell the bottle tops/caps individually? I already have a Podium Big Chill 26oz bottle, but I am looking to replace just the cap. | http://shop.camelbak.com/accessory-types-bottle-replacement-parts-/l/322 There you will find the replacement part you are looking for. It may be better to buy just a new bottle. |
Do you sell the bottle tops/caps individually? I already have a Podium Big Chill 26oz bottle, but I am looking to replace just the cap. | Not certain whether Amazon does, but you can at Camelbak http://shop.camelbak.com/accessories/replacements/bottle/l/322 |
Do you sell the bottle tops/caps individually? I already have a Podium Big Chill 26oz bottle, but I am looking to replace just the cap. | http://shop.camelbak.com/accessory-types-bottle-replacement-parts-/l/322There you will find the replacement part you are looking for. It may be better to buy just a new bottle. |
Do you sell the bottle tops/caps individually? I already have a Podium Big Chill 26oz bottle, but I am looking to replace just the cap. | I haven't found them on Amazon. They are available through the official camelbak site for $6 each. |
I have a water treatment tank about 4 foot high with a smallish opening (~ 5 inches) at the top. Can I use this pump to drain it? Eg, can you add an extension tube to the input so as to reach the bottom of the tank? Or do I need the 24x72 size? What does that mean? - Is the pump unit 72" long ? - thanks - I have a water treatment tank about 4 foot high with a smallish opening (~ 5 inches) at the top. Can I use this pump to drain it? Eg, can you add an extension tube to the input so as to reach the... » Read More I have a water treatment tank about 4 foot high with a smallish opening (~ 5 inches) at the top. Can I use this pump to drain it? Eg, can you add an extension tube to the input so as to reach the bottom of the tank? Or do I need the 24x72 size? What does that mean? - Is the pump unit 72" long ? - thanks - « Show Less | Eg. 36x72 means pump length is 36 inchs and hose length is 72 inches. I don't believe you can extend the pump mainly because it would be hard to creat the vacuum seal. They do sell pumps longer than 48 in so you could reach the bottom but the fourth would be thicker too so make sure it could fit inside a 5in opening before you buy. |
I have a water treatment tank about 4 foot high with a smallish opening (~ 5 inches) at the top. Can I use this pump to drain it? Eg, can you add an extension tube to the input so as to reach the bottom of the tank? Or do I need the 24x72 size? What does that mean? - Is the pump unit 72" long ? - thanks - I have a water treatment tank about 4 foot high with a smallish opening (~ 5 inches) at the top. Can I use this pump to drain it? Eg, can you add an extension tube to the input so as to reach the... » Read More I have a water treatment tank about 4 foot high with a smallish opening (~ 5 inches) at the top. Can I use this pump to drain it? Eg, can you add an extension tube to the input so as to reach the bottom of the tank? Or do I need the 24x72 size? What does that mean? - Is the pump unit 72" long ? - thanks - « Show Less | Yes it is 72", so you would be able to drain most of it. I suggest you tie a small weight at the end of the hose to keep it from flopping around and to keep the hose opening from rising off the bottom as you pump. With that you should be able to pump the liquid leaving a fraction of an inch in the tank. |
I have a water treatment tank about 4 foot high with a smallish opening (~ 5 inches) at the top. Can I use this pump to drain it? Eg, can you add an extension tube to the input so as to reach the bottom of the tank? Or do I need the 24x72 size? What does that mean? - Is the pump unit 72" long ? - thanks - I have a water treatment tank about 4 foot high with a smallish opening (~ 5 inches) at the top. Can I use this pump to drain it? Eg, can you add an extension tube to the input so as to reach the... » Read More I have a water treatment tank about 4 foot high with a smallish opening (~ 5 inches) at the top. Can I use this pump to drain it? Eg, can you add an extension tube to the input so as to reach the bottom of the tank? Or do I need the 24x72 size? What does that mean? - Is the pump unit 72" long ? - thanks - « Show Less | Unless i have been using it wrong, the hose is where the water is expelled not entered. I tried to pump thru the hose and it wouldn't suck any water up thru the hose. I could be wrong make sure to verify 1st answer. |
How to Eliminate 'Access Denied' when copying files? What happened? | This is an issue probably related to "ownership" of the directories / files: See this link: http://www.techspot.com/vb/topic8914.html for help. Hopefully, this will solve your problem. Also, referenced in that posted link is one from Microsoft describing how to take ownership of directories and files in XP: http://support.microsoft.com/default.aspx?scid=kb;en-us;308421&Product=winxp (You may have to copy and paste the links into your browser). |
I am disabled and only have partial use of my dominant hand, do you think I would be able to handle this? | It is difficult to say without a better understanding of your condition. The iron is not heavy, and my 10-year old daughter was able to assemble the kit. Placing the components on the board required bending small wires and installing them through holes in the board. Soldering requires a steady hand for a few seconds at a time. There are some tools available that may help hold some items in place if you run into trouble. |
Will it also fit iPad 1st generation? | Sorry not sure. I got it for my 4th Generation. However, it is very very flexible meaning the 4 corners that hold the ipad in place look like they could hold any generation ipad. I don't think you'll have a problem. |
Does it work on kindle fires? | It can charge anything with a micro USB port. Don't know what type port the Kindle Fire port has.There is an option when you click on the item for Ipod charger as well. If you turn off your item it will charge. If you leave it on it won't die but won't charge. I use it when I am not in my car or near an electrical outlet. I can continue to play a game, FB, text, etc. Maybe you could find a micro USB converter to a Kindle port? |
What comes in the package? Just the filter? Or does it have any sort of protective case or holder? | Was in a clear plastic case, I think; been a while since I first opened it, it's now protecting one lens |
Is this down rod compatible with Hunter fan 54094? | We didn't check the model number on our fan before ordering, we took a risk, but it worked. I wish I could tell you more, but the fan is in a vaulted ceiling and we got rid of the paperwork for it long ago. I would speak directly with Hunter on this one. |
Is this down rod compatible with Hunter fan 54094? | I have 5 Hunter fans in my house that I assembled and installed myself. Only one of them did I use a down rod that was not supplied with the original kit. It was a Hunter accessory rod (3 foot length) and it was the same diameter and threading as the short rod they provided. As long as you purchase a Hunter down rod I would think you'd be all right. If you're still not convinced, call the factory direct and ask for their guidance. |
Is this down rod compatible with Hunter fan 54094? | The down rod should be compatible with all ceiling fans. If u go to Lowes or home Depot they sell only one type of down rod it is the length of the rod that you can get in different sizes |
does it work with a mac? | This item is a camera only. You'll need a dvr to hook the camera up to. At least that is my understanding. The plugs on the camera aren't the same kind of plugs that are on any mac I have seen. This camera is 700 tvl, so to take full advantage of the higher resolution, you'll have to spend at least $300 on an Hi Def DVR. I bought a DVR that is not HD, and I can't make out license plates from the cars passing 25 ft in front of my house. |
does it work with a mac? | In order to use this camera you need a DVR. The surveillance software that comes with the DVR usually works with PC or MAC always depends in the type of DVR you have. |
does it work with a mac? | This item is a camera only. You'll need a dvr to hook the camera up to.At least that is my understanding. The plugs on the camera aren't thesame kind of plugs that are on any mac I have seen. This camera is 700 tvl,so to take full advantage of the higher resolution, you'll have to spend at least$300 on an Hi Def DVR. I bought a DVR that is not HD, and I can't make out licenseplates from the cars passing 25 ft in front of my house. |
How is this shower curtain holding up? How does it wash? Any mould problems? | Mine is holding up fine. No mold issues, but I do have a bathroom fan. I wash it regularly, but the first time it did shrink an inch or two in length. It is a nice heavy weight and I would buy it again for the elegance it provides. |
How is this shower curtain holding up? How does it wash? Any mould problems? | I have loved it... I must admit that it is in a guest bath that does not receive a lot of use. I always choose Peacock Alley linens if given the option. Their linens are soooo wonderful. Worth every penny even though they tend to be a little pricyl |
How is this shower curtain holding up? How does it wash? Any mould problems? | I am in love with mine! I get so many compliments! l I haven't wash it and it v No problems with mold. We have two kittens and it was snagged once but it pulled right out. I like it so well we have just bought a winter home and I am planning on buying a second one and even planning to buy matching bedding for our guest room and bath. You won't be sorry buying this! |
How is this shower curtain holding up? How does it wash? Any mould problems? | I have had mine for a year and it holds up beautifully. Very high quality material. Haven't had to wash it yet and no mould . |
exact dimensions edge to edge. Edge of bowl to edge of bowl. Depth. | I do not have the dimensions. Go to Kraus website and look for a template drawing of the model you are considering. There is a template included with every sink which is typically used by the counter mfg to cut the correct side hole and allow for proper mounting. |
How long does it take to dry? | Depends.On What You Make With It And.How Big...Big Projects Takes At Least 24 Hours Small.About 30 Mins To An.hour |
my waist size is 32, which size suits me? | I have a 33/34. I recommend getting a Large. I bought a medium and it's way too tight. |
my waist size is 32, which size suits me? | I would recommend a small. It will provide you a good tight fit without a lot if excess belt getting in your way. |
my waist size is 32, which size suits me? | I'm 32 as well n I bought medium. If u want a very tight fit, go small. Medium can give u very good lock down, but with a lot of extra belt. If you don't plan on getting any wider in the waist, small is the size for you |
my waist size is 32, which size suits me? | I am a 33"/34" and went large and it is very comfortable. I bought a grizzly medium from bb.com and was too tight |
Fujitsu ScanSnap S1300 or S1500 vs Canon Scantini I'm having a hard time deciding which to buy. I no longer have Adobe Pro and don't want to buy it. If I want to go paperless and keep folders of 100-200 household subjects, do I need anything besides included software (either Canon or Fujitsu) if I have Microsoft Office? Fujitsu ScanSnap S1300 or S1500 vs Canon Scantini I'm having a hard time deciding which to buy. I no longer have Adobe Pro and don't want to buy it. If I want to go paperless and keep... » Read More Fujitsu ScanSnap S1300 or S1500 vs Canon Scantini I'm having a hard time deciding which to buy. I no longer have Adobe Pro and don't want to buy it. If I want to go paperless and keep folders of 100-200 household subjects, do I need anything besides included software (either Canon or Fujitsu) if I have Microsoft Office? « Show Less | I was having the same debate, limiting my choices to the Fujitsu 1100, 1300, and 1500 because Amazon's sales rankings are often if not usually more reliable than any single review or opinion. But then I saw a review in MacWorld (the most authoritative Mac magazine) that ranked the Canon Scantini Formula P-150 above both the Fujitsu 1100 and 1500. Unfortunately, they haven't gotten to reviewing the Fuj. 1300 as yet. But given Canon's stellar reputation and performance in printing and multifunctionals, I'm now leaning toward the Canon Fromula P150. It's $259, which can't be a whole lot more than the Fuj. 1300. Here's MacWorld's review: [[http://www.macworld.com/article/1159739/canonp150.html]] I was having the same debate, limiting my choices to the Fujitsu 1100, 1300, and 1500 because Amazon's sales rankings are often if not usually more reliable than any single review or opinion. But then I saw a review in MacWorld (the most authoritative Mac magazine) that ranked the Canon Scantini Formula P-150 above both the Fujitsu 1100 and 1500. Unfortunately, they haven't gotten to reviewing the Fuj. 1300 as yet. But given Canon's stellar reputation and performance in printing and multifunctionals, I'm now leaning toward the Canon Fromula P150. It's $259, which can't be a whole lot more... » Read More I was having the same debate, limiting my choices to the Fujitsu 1100, 1300, and 1500 because Amazon's sales rankings are often if not usually more reliable than any single review or opinion. But then I saw a review in MacWorld (the most authoritative Mac magazine) that ranked the Canon Scantini Formula P-150 above both the Fujitsu 1100 and 1500. Unfortunately, they haven't gotten to reviewing the Fuj. 1300 as yet. But given Canon's stellar reputation and performance in printing and multifunctionals, I'm now leaning toward the Canon Fromula P150. It's $259, which can't be a whole lot more than the Fuj. 1300. Here's MacWorld's review: [[http://www.macworld.com/article/1159739/canonp150.html]] « Show Less |
Fujitsu ScanSnap S1300 or S1500 vs Canon Scantini I'm having a hard time deciding which to buy. I no longer have Adobe Pro and don't want to buy it. If I want to go paperless and keep folders of 100-200 household subjects, do I need anything besides included software (either Canon or Fujitsu) if I have Microsoft Office? Fujitsu ScanSnap S1300 or S1500 vs Canon Scantini I'm having a hard time deciding which to buy. I no longer have Adobe Pro and don't want to buy it. If I want to go paperless and keep... » Read More Fujitsu ScanSnap S1300 or S1500 vs Canon Scantini I'm having a hard time deciding which to buy. I no longer have Adobe Pro and don't want to buy it. If I want to go paperless and keep folders of 100-200 household subjects, do I need anything besides included software (either Canon or Fujitsu) if I have Microsoft Office? « Show Less | I need an ADF scanner that will be used mainly for business cards scanning. Which one do you recommend? Thanks! |
Fujitsu ScanSnap S1300 or S1500 vs Canon Scantini I'm having a hard time deciding which to buy. I no longer have Adobe Pro and don't want to buy it. If I want to go paperless and keep folders of 100-200 household subjects, do I need anything besides included software (either Canon or Fujitsu) if I have Microsoft Office? Fujitsu ScanSnap S1300 or S1500 vs Canon Scantini I'm having a hard time deciding which to buy. I no longer have Adobe Pro and don't want to buy it. If I want to go paperless and keep... » Read More Fujitsu ScanSnap S1300 or S1500 vs Canon Scantini I'm having a hard time deciding which to buy. I no longer have Adobe Pro and don't want to buy it. If I want to go paperless and keep folders of 100-200 household subjects, do I need anything besides included software (either Canon or Fujitsu) if I have Microsoft Office? « Show Less | Well after reading on the canon for the last hour my only question has to do with OCR; no real reviews on how well the Canon performs in this area. There is one fairly major drawback to the Canon from what I can tell: no export to MS Word. Again I haven't tried the thing, but I've read the manual, and there is no mention of the capability. To me this isn't a big deal, I'm more worried about archiving than reformatting. The big plus of course is the apparent scan rate of 15 ppm. With that, I think I'm sold. I have the 215 ready for checkout. |
is there warranty on the phones | Please do NOT order this phone from this Company you will only run ito problems. Get the phone from your carrier like Verizion usually you have 30 days or maybe 2wks and then you can get insurance for about 5 to 6$ and then your deductable would only be 99 $ to replace instead of full retail. That is the best advice I can offer. Good Luck-Mary V |
is there warranty on the phones | 2 years. http://www.samsung.com/uk/support/warranty/warrantyInformation.do. Buying unlocked requires a lot of extra work to get the phone running. I used straight talk. Lot of messin around, but it's also savin me a lot now to. |
I am replacing a TrendNet TEW680MB media bridge and was wondering if this would do the trick. I am running 75/35 internet and mainly used this to hook up my receiver that is downstairs to the wireless where the router is upstairs......will this work?? | It should - that is what it is designed to do. I have a media server and a TV attached to mine. I can stream Internet content over wireless to the TV, and stream music to other devices on my wifi. Make sure you update the firmware http://support.dlink.com.au/Default.asp as my connection was very unreliable till I did. Still has some reliability issues, and I would try something else next time (although the problem could be the Motorola device it bridges to). |
Is this the same print as the quilt you advertise? | Yes. The pattern Greenland Home Antique is a non-quilted item. It is beautiful front and back. There is a bedspread, pillow shams, and two small decorative pillows as well in Greenland Home Antique. The bedspread comes in full, queen, as well as king size. If you have any other questions, please feel free to ask. |
Are these dishes a "white white" or more bone or cream in color? | I would use the word as off white and near to cream. But not very creamy in colour. |
Does this garcinia cambogia extract product come with a money-back guarantee? | Hi Lanette, thanks for your answer and support :) Hello Randolph. Yes, our garcinia cambogia is backed up with a 30 day no questions asked return policy. We understand that the human body is complex and no supplement works equally well for all people. We simply ask that you take the supplement as indicated and give yourself a chance to really experience what the garcinia cambogia can do for you.Be sure to: Take on an empty stomach 30-60 minutes prior to each of 3 meals a day with a glass of water, and use this for one month. Take one pill before each meal for "satiety" (reduced appetite) and two pills before each meal for enhanced weight loss. Hi Lanette, thanks for your answer and support :) Hello Randolph. Yes, our garcinia cambogia is backed up with a 30 day no questions asked return policy. We understand that the human body is complex and no supplement works equally well for all people. We simply ask that you take the supplement as indicated and give yourself a chance to really experience what the garcinia cambogia can do for you.Be sure to: Take on an empty stomach 30-60 minutes prior to each of 3 meals a day with a glass of water, and use this for one month. Take one pill before each meal for... » Read More Hi Lanette, thanks for your answer and support :) Hello Randolph. Yes, our garcinia cambogia is backed up with a 30 day no questions asked return policy. We understand that the human body is complex and no supplement works equally well for all people. We simply ask that you take the supplement as indicated and give yourself a chance to really experience what the garcinia cambogia can do for you.Be sure to: Take on an empty stomach 30-60 minutes prior to each of 3 meals a day with a glass of water, and use this for one month. Take one pill before each meal for "satiety" (reduced appetite) and two pills before each meal for enhanced weight loss. « Show Less |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.