query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
how much weight can this kayak take? can this support a 200 pound man? | I think 200 lb is about the limit. I was ten under that when I purchased the kayak and had no problem, and it could have taken another ten pounds. You have to make sure not to over inflate if using an electrical pump. A manual pump won't give you that problem. |
how much weight can this kayak take? can this support a 200 pound man? | I run around 220-225 and it worked no problem for me. No loss of inflation and I was able to stay out on a small lake for about an hour and a half without any issues |
how much weight can this kayak take? can this support a 200 pound man? | Easily! But the kayak loses air after a while so it's not that great in the end. Inexpensive kayak = disposable kayak |
how much weight can this kayak take? can this support a 200 pound man? | The answer is NO. If you read the directions the MAXIMUM RIDER SIZE is 165 lbs, with an additional 55 lbs of cargo to reach the stated 220 lb limit stated online. |
What is the Brand for The tensioner ? NTN, Can you provide the parts which brand? or made in which country?? Thanks | I am not sure of brand; but I installed the Gates brand water pump/belt with tensioner and all worked out find. It's been 5 months and 15,000 miles later and I have experienced no issues. I would recommend it. good luck. |
What is the Brand for The tensioner ? NTN, Can you provide the parts which brand? or made in which country?? Thanks | no idea, fit right still working. almost all replacement auto parts are made overseas, I Think |
How large is this plant? | Here in Southern California I have seen this plant grow to be a tall shrub about 4 feet wide and 6 feet tall, but it depends on how you prune/shape it. The plant I purchased arrived as a small plant about 4 inches tall. It is now about 2 1/2 feet tall an filling out nicely. No blooms yet. |
How large is this plant? | It's a bush ...medium size nice leaves no flowers yet. I have propigated it into 3 more small plants. Saw this in South Africa |
How large is this plant? | Mine grew three feet and it got the flowers. I have it mostly inside by a sunny window. This spring, when the temperature outside got warmer- 50's and 60's - and it now has new leaves. I hope it will flower outside. I will get it inside again when the weather gets colder. |
How large is this plant? | The Yesterday Today & Tomorrow is a bush which can grow grow as high as eight feet tall. You can prune it to keep it only two to three feet high. It can also be grown inside in a pot in colder zones. |
How large is this plant? | I've seen them get 4-5 ft tall...small tree like. Not sure how long it takes them to get that big though. |
How large is this plant? | When I received the plant it was about 5" tall. I had planted it in the ground in late winter here in San Jose, Ca. We had a frost and it lost some leaves. Now that it's May it's about a foot tall and growing. Our neighbor that lived next door had a Yesterday Today and Tomorrow plant that grew to about 6 feet. I'm suspecting this plant will get about that tall. |
will these fit on the wahl 8081 detailer? | Not sure what model humber I have but they fit pretty snug on my wahl. Use em every two weeks when I give myself a haircut. I think the guards might be all standard sized. |
will these fit on the wahl 8081 detailer? | No it wont fit the detailer trimmer. It fits all wahl clippers.. they are awesome clipper guides very durable and easy to use. |
If I am hanging multiple racks side by side, alternating higher and lower, how much clearance between the racks do I need to leave? | I was limited for space on my 60" wall, so I hung four brackets 12" apart and like you're planning, alternated them between high and low. I own four 26" Specialized mountain bikes with standard length handlebars. To make them fit, I inverted (faced downwards) the lower bracketed bikes and kept the upper bracketed bikes facing upwards. The clearance between the handlebars is 1-2". The reason I hang it that way is so I can take any bike out without having it interfere with the others. Hope this helps. |
If I am hanging multiple racks side by side, alternating higher and lower, how much clearance between the racks do I need to leave? | It depends on the width of the handlebars. I actually mounted a piece of wood on the wall to span the distance of a few studs, as to not have the positioning of the studs dictate the spacing of the brackets. The you can mount the brackets whichever distance you want from each other, and not sacrifice support. |
If I am hanging multiple racks side by side, alternating higher and lower, how much clearance between the racks do I need to leave? | It really depends on the size of your bikes. We have two Gary Fischer mountain bikes and the racks are hung approx. 12-15 inches from each other. |
If I am hanging multiple racks side by side, alternating higher and lower, how much clearance between the racks do I need to leave? | Depends on your handlebar and pedal sizes. I lined up my bikes on the garage floor in the pattern I wanted to hang them until I got the optimal spacing. A few extra hands are handy to stand the bikes up straight to get a more accurate read. I also added a few inches to my measurement as a buffer. I did this for easier access in getting a bike up or down when you have a bike on each side. |
If I am hanging multiple racks side by side, alternating higher and lower, how much clearance between the racks do I need to leave? | I have 4 on my wall side to side, spaced about 9.5" apart from each other. At first i measured directly underneath my bike's bottom bracket to the outside of one of the pedals which was about 8 inches, so I knew it had to be 8" apart at least. But actually my studs dictate where the rack goes |
i am a 55 year old male 5'9" tall 170 pounds.what would be my correct size? i need to wear them at least 8 hours for work. | * Complete patella, lateral, and medial protection * Sold in pairs SIZE GUIDE: Measurement (diameter in inches) around center of knee Medium Measurement: 13.5 - 15.5 Large Measurement: Over 15. |
i am a 55 year old male 5'9" tall 170 pounds.what would be my correct size? i need to wear them at least 8 hours for work. | From the Mizuno website: These measurements should be taken 1" above the knee. small (11 & under) - under 13.5" medium (12-15 yrs) - 13.5"-15.5" large (16 & older) - Over 15.5" |
Where can I find a replacement lid | I can't help you on that question. The first one that I bought had a rubber lid. It still works fine. The 2nd one had a plastic lid and it cracked quickly. However, I must report that the cracked plastic lid still works well. |
What number is the "OPI Red?" | This picture is not the color of OIP Red. This looks like Hawaiin Orchid NLA06. OPI Red's item number is NLL72 which is a bright red color very similar to OPI Big Apple Red NLN25. |
Is the rod tip forgiving? Looking to utilize for leadcore - walleye fishing. Thanks | It's a great rod and works well for big fish, but beware, this ad is a lie, the mention of a pack of 2 does not mean two rods and two reels. They count the rod and reel as individual items. I had inquired before I placed the order and they said it was two sets and when it arrived it was a single set. I ended up returning it, but you have to tell the seller about the false representation or you'll have to pay almost $40 to return it. I bought a single set at Walmart for almost half the price and it's a great rod&reel combo, since the company sells Shakespeare sells it that way. |
The stylus works well except that this black smudge that keeps rubbing off onto the screen. Is it possible that the color of the nib is wearing off? | That's weird... hasn't happened to mine yet. I've had for about 2 months now, with semi-regular use. The nib is still working well. I think a 3-pack of nibs is avail on Amazon and inexpensive. |
The stylus works well except that this black smudge that keeps rubbing off onto the screen. Is it possible that the color of the nib is wearing off? | this item was RETURNED TO AMAZON "the black nib is defective" you should return your stylus ASAP |
The stylus works well except that this black smudge that keeps rubbing off onto the screen. Is it possible that the color of the nib is wearing off? | Have never had a 'smudge of black'. As far as I know, there is no black color in the tip that comes off. |
The stylus works well except that this black smudge that keeps rubbing off onto the screen. Is it possible that the color of the nib is wearing off? | Ester;I have never noticed any smudging, however, I use mine with a Kindle. I have used both Soft and Firm Tips. I think the Tips are solid black and are not colored. Maybe your tip is deteriorating and leaving a trail. I would try to clean the tip. New tips are available from Amazon for about 3 for $6. Hope this helps.john |
The stylus works well except that this black smudge that keeps rubbing off onto the screen. Is it possible that the color of the nib is wearing off? | I've never had that experience but I have felt the nib was a bit large. You can get replacement nibs that are fairly inexpensive and try a new nib. |
Is this drive compatible with a Firewire hub? I only have one Firewire input which I'm already using, so I'll need to use a hub. | I imagine so, but I cannot confirm. I have mine (the 2 TB model) daisy chained with two older 1TB WD My Studio drives, running into a thunderbolt port, and have had not problems. Comp < 2TB [firewire to thunderbolt] < 1TB [firewire 800] < 1TB [firewire 800]They are really pretty much a plug and play solution, set them up once, and forget em. I wish I would have ponied up the other fifty or so bucks and for the 3TB to run as time machine. Hope this helps. |
Is this drive compatible with a Firewire hub? I only have one Firewire input which I'm already using, so I'll need to use a hub. | I imagine so, but I cannot confirm. I have mine (the 2 TB model) daisy chained with two older 1TB WD My Studio drives, running into a thunderbolt port, and have had not problems. Comp < 2TB [firewire to thunderbolt] < 1TB [firewire 800] < 1TB [firewire 800] They are really pretty much a plug and play solution, set them up once, and forget em. I wish I would have ponied up the other fifty or so bucks and for the 3TB to run as time machine. Hope this helps. |
Is this drive compatible with a Firewire hub? I only have one Firewire input which I'm already using, so I'll need to use a hub. | Yes, this is a FireWire hard disk. I haven't used a FireWire hub, so I expect you can use one with it; BUT I don't know from experience. One problem I have is that although I "open" this hard disk, it keeps locking. That might be my fault. But just the fact that it keeps locking on its own makes me think that (1) something WD is doing is incorrect and/or (2) WD's lack of instructions are a problem. On the other hand.... |
Is this drive compatible with a Firewire hub? I only have one Firewire input which I'm already using, so I'll need to use a hub. | Hookup your firewire input on your computer and then go from the external (My Book) to your other firewire input. |
how many ounces does each hold? | Also, when the neighborhood kids and my nieces and nephews have eaten the ice candy, if I fill it more than 3 or 4 ounces, they don't finish all of it. And one of my nephews even told me I was filling them too full. I think an average popsicle that you buy in the stores is 3 to 4 ounces. Hope this helps. I love these bags. They are so much fun! |
how many ounces does each hold? | I cut my bags in 1/2 and get approx 2 3/4 oz. One has to allow for both bottom and top closure. If you are using the whole bag I would say you would get approx. 6oz. I filled my 1/2 bag with water and left space to seal to get the amount it holds. |
how many ounces does each hold? | I would say they hold about 6 fluid ounces. But that doesn't leave much room at the top to tie them. I would only use 4 to 5 ounces. They expand a lot when they freeze. |
Should women's rogaine be continued if you see more hair loss in the first month (6-8weeks) of its use? Has anybody experienced any increase in thinning and hair loss during the 1st month of its usage ? | I didn't notice new hair growing in until about half a year later. Now I've been using it for over a year and half and my hair is definitely fuller. I can now have long hair. I will say just keep on using it for a year and if there's no difference, it won't work for you. |
Would this stuff work for transfering vinyl stencils (to a hard, painted surface)? | I tried this for that. Hard to see to peek. Works great as transfer paper though. |
do the slide out drawers have any permanent dividers, or can all dividers be removed so you have one flat space? | they all have dividers along the long side - each tray is divided into at least three narrow long sections; those cannot be removed. you are also given numerous small dividers to make the narrow sections smaller; but you cannot have one flat open tray |
can this be used as SIP-T20 extension? | Sort of. You could setup a shared line appearance and they'd both ring at the same time. A lot of this depends on which VOIP system you're using, as this would be a feature of the system. |
One of the comments suggest that the brim tends to be rather floppy. Would you agree with this assertion? | I would describe the brim as 'flexible' rather than 'floppy'. One can shape the brim to some extent... i.e., tilted down in front and tilted up in back.The brim will not flop down around your ears. |
One of the comments suggest that the brim tends to be rather floppy. Would you agree with this assertion? | no, I don't find it floppy. I hike and ride my comfort bike in the wind with this hat. I have a small head (size 7), so perhaps its a smaller profile. Make sure you get the right size..... "One size fits all" hats are usually floppy. |
One of the comments suggest that the brim tends to be rather floppy. Would you agree with this assertion? | I don't find the brim to be floppy. The hat is packable, and isn't stiff, but it's not floppy. It's just right.... |
One of the comments suggest that the brim tends to be rather floppy. Would you agree with this assertion? | I found the hat to be great! Neither my husband nor I, thought the brim was at all floppy and we continue to happily wear our Tilley hat. |
Looking at applying this to our new cedar deck. Do we have to have concerns about it being slippery if it's wet? | If it is a smooth sanded cedar then yes you will have slippery issues. Stain would work better. |
Looking at applying this to our new cedar deck. Do we have to have concerns about it being slippery if it's wet? | Yes...it's high gloss and when wet could be slippery. look at a deck finish product non-slip in it's description. |
Looking at applying this to our new cedar deck. Do we have to have concerns about it being slippery if it's wet? | I do not think it would be anymore "slick" than a good spar varnish. It is a "film" finish so will tend to be "smooth." I have, in the past, added grit to some deck finishes to add a bit of traction to the surface. A good paint store can advise you on the products available and how much to add. Have to constantly stir the mixture and it has a bit of a cloudy look. I would try a sample of the deck wood and apply the Epifanes clear varnish and test after each coat for "slickness". ..best is to test on wood you have. It does soak in so multiple coats may be needed. I applied 4 on a outside work bench. It has stood up well in the intense Colorado sun. I do not think it would be anymore "slick" than a good spar varnish. It is a "film" finish so will tend to be "smooth." I have, in the past, added grit to some deck finishes to add a bit of traction to the surface. A good paint store can advise you on the products available and how much to add. Have to constantly stir the mixture and it has a bit of a cloudy look. I would try a sample of the deck wood and apply the Epifanes clear varnish and test after each coat for "slickness". ..best is to test on wood you have. It does soak in so multiple coats may... » Read More I do not think it would be anymore "slick" than a good spar varnish. It is a "film" finish so will tend to be "smooth." I have, in the past, added grit to some deck finishes to add a bit of traction to the surface. A good paint store can advise you on the products available and how much to add. Have to constantly stir the mixture and it has a bit of a cloudy look. I would try a sample of the deck wood and apply the Epifanes clear varnish and test after each coat for "slickness". ..best is to test on wood you have. It does soak in so multiple coats may be needed. I applied 4 on a outside work bench. It has stood up well in the intense Colorado sun. « Show Less |
Looking at applying this to our new cedar deck. Do we have to have concerns about it being slippery if it's wet? | I would not recommend this for a deck for a few reasons: 1. It is very soft, even when cured. It would handle the weather great, but would be destroyed by foot traffic very quickly. 2. It is a High Gloss (think glasslike) finish and I would think VERY slippery when wet. 3. It is very expensive, and you'd need multiple (8+) coats to build it up. I would check with the manufacturer to see if they have a different product suitable to your needs. |
Looking at applying this to our new cedar deck. Do we have to have concerns about it being slippery if it's wet? | I would not recommend this for a deck for a few reasons:1. It is very soft, even when cured. It would handle the weather great, but would be destroyed by foot traffic very quickly.2. It is a High Gloss (think glasslike) finish and I would think VERY slippery when wet.3. It is very expensive, and you'd need multiple (8+) coats to build it up.I would check with the manufacturer to see if they have a different product suitable to your needs. |
Are there any options / accessories for adding a sound bar? (besides using the VESA mounts on the back) | I couldn't find any references to such an accessory or option in the manual. |
Will this reduce spots when washing car? | Water will spot if not dried off due to whatever is on the surface of the metal. Having no chlorine on your paint is a huge plus to using filtered water. It will greatly reduce spotting because it removes impurities in the water before it hits the surface of the metal, but there may be residual detergents on the metal so drying is still recommended. |
Two monitors in same house? Can you use two of these monitors in the same house (different rooms), without any interference? | As long as you have them set on different channels they don't interfere with one another. |
Two monitors in same house? Can you use two of these monitors in the same house (different rooms), without any interference? | Can you add a second nursery unit and use with the same parent unit? Or do you have to have two separate unit sets? |
Two monitors in same house? Can you use two of these monitors in the same house (different rooms), without any interference? | I'm interested in the answer to this as well. Did you ever find out or end up buying more than one? |
What is the best or should I hook up a hot water or cold water supply? | I don't have the installation instructions with me right now but I'm pretty sure they want it hooked up to the COLD water supply. It sometimes adds water to cool off the water in the system before it auto-drains. Mine is hooked to the cold water and it works great. |
Could I allow it to warm for 24 hours, or does it have an automatic shut-off that is less than that? | I think you can keep it going for 24 hours--you set the number of hours you want when you start it up. I don't see why you couldn't do 24-- |
Could I allow it to warm for 24 hours, or does it have an automatic shut-off that is less than that? | I have not used this yogurt maker in awhile (I now use a yogourmet quart size), but I do believe there is a timer that goes off in less than 24 hours. The way I got around it was that I timed it for a few hours and then when it went off I reprogrammed it for the remainder of the 24 hour period, cuz usually I was around to program it for the remainder. I hope this helps and you are understanding my statement.Example: program time for 10 hours (at work), when I get home and alarm sounds, I reprogram for 14 more hours and then its done :-) |
it´s piece work to cavalier ls 2.2 | yes it does work it is about 1 & a half inches too long but it will fit perfect |
I lost the manuaĺ before reading it or usibg the product so i dunno what does what can someone possibly give me a crash course on wht is what plz?? | The pink pads are used for buffering, they go first without any liquid. The yellow pads are second they are paired with the repair fluid (2 small drops) & finally are the blue pads which are paired with the cleaning fluid (2 small drops) on the pad. Repeat the process if necessary. |
I lost the manuaĺ before reading it or usibg the product so i dunno what does what can someone possibly give me a crash course on wht is what plz?? | Put the red cleaner disc in first. When it is done, put the yellow disc (put one drop from the small bottle on the disc), finish with the blue disc (put one drop from the taller bottle on the blue disc). I only use it for about 30 minutes ( can do 3-4 DVD's in 30 minutes). The little brush is for cleaning the red disc after each DVD is cleaned. |
For 2006 civic hybrid, I want to install a gps in dash. So, how much size is possible to fit the dash kit? only 6.2"? or 7" also possible? | 7 inch fits fine are any thing else smaller just watch for the room in the back due to wire space steering wheel control box are any other add in space limeted but will fit. |
For 2006 civic hybrid, I want to install a gps in dash. So, how much size is possible to fit the dash kit? only 6.2"? or 7" also possible? | The opening will fit a double din stereo. I would check to see if the GPS unit is designed to fit into that size opening, or at least no bigger than that. I don't know without measuring and the car is with my son. |
For 2006 civic hybrid, I want to install a gps in dash. So, how much size is possible to fit the dash kit? only 6.2"? or 7" also possible? | This kit will fit a double-din deck. You should be able to fit both a 7" and a 6.2" screen in-dash gps, as long as they fit the single or double-din size standard, which it probably does. However, there is no way for me to give you a clear answer without knowing exactly which gps receiver you are looking at, though with either a 6.2 or 7 inch screen fixed screen, it's almost guaranteed to be double-din. Are you looking at the Pioneer's, Kenwood's or other major brands? You should be safe. However, if you list the exact model, I can tell you whether it will fit or not... |
Where can I find a lid to fit the 12" fry pan? | Ikea has various generic lids for pans. http://www.ikea.com/us/en/catalog/products/80112522/ (in case the link doesn't go through, go to ikea and search for STABIL lid. |
how to get a refund. mine melted in the dryer! | Thanks for your question! To process a return or replacement you can use our Online Returns Center: |
can this be used with two f30 T8 bulbs? | Kathleen Yes, it will work with two f30t8 bulbs.Also working individually each,if you break one works the other.I hope this answers your question.Sergio |
can this be used with two f30 T8 bulbs? | Kathleen, Thank you for your inquiry. As the previous customer has advised, yes, the RSW240T12120 will run 2 x F30T8 lamps at 120V. Full specs can be found at our Robertson Direct Website or in the pictures section on the RSW240T12120 Amazon product page where the full spec sheet appears. |
Is this drilled for a schrader or presta? | Mine were drilled for Presta, you can easily enlarge em for Shrader if necessary..... |
Is this drilled for a schrader or presta? | Schrader. ..awesome rims especially on sunny day lots of looks n compliments for 1/6 price of a brand name...highly recommend |
Does this need to be seasoned? | No, it has a ceramic coating and cleans up great with water and a scrub brush. |
Are these the ones made in Japan? | Yes. I've had Duracell rechargeables for years and never had a defective one. |
Are these the ones made in Japan? | I have discarded the packaging container, I don't know. However I get hearing aid batteries by Duracell made in Germany. They last quite a bit longer that ones purchased in stores. Why I don't know. Hope this helps. |
Are these the ones made in Japan? | I'm not sure. The pack I have right now was made in Japan. I have used Duracell rechargeable batteries for years. Tested them head to head with Energizers and Duracell won hands down in durability and # of recharges possible. The package I have right now is not your AAA it is a pre-charged AA rechargeable pack. |
do u have a video on it that I can see | Hello Dwight, No, I am sorry, but we do not have videos on our kits. You may want to check with Revell themselves. Thank you for your interest. Model Empire Inc. |
How will these stands work with a 1.5 inch speaker mount? | Like the other two said, it's a 1 3/8' pole so it may be a little loose in a 1 1/2'. It will work fine but if you want a snug fit you would need a adapter sleeve. Overall it will work just fine! |
How will these stands work with a 1.5 inch speaker mount? | Since these are 1.375'' inches wide, you should be okay. I should answer your question with a question: How will they not? |
I know this light comes with a flat top 18650 battery. Will it also work with a button top 18650? | it's not really an 18650 it is a proprietary battery yes it will work with regular 18650 s |
I know this light comes with a flat top 18650 battery. Will it also work with a button top 18650? | I don't know because I did not receive this light instead I received the PD 5 which I kept. Sorry. |
I know this light comes with a flat top 18650 battery. Will it also work with a button top 18650? | Don't know. But the great thing is it's rechargeable. For shtf scenarios ( or just camping) it's perfect. Especially with a solar powered recharger. Available everywhere for about 100 bucks. |
Can the mounts be mounted into tile | Absolutely. The screw holes will need to be pre-drilled. Mine is mounted in ceramic tile. I would suggest sealing the escutcheon plate with construction adhesive. |
Can the mounts be mounted into tile | Yes but be careful they are plastic. So be sure to pre-drill a hole for them if you can. I would also suggest some type of glue to hole in on as well. I know it's 30$ or something but I would have bought a more expensive one but there were no stores in my town that had them. |
Can the mounts be mounted into tile | If you're willing to put screws through your tile or if you have really strong glue, then sure. |
Can the mounts be mounted into tile | I can't see why not. Just ask your hardware store guy for screws to go through tile. The screws that are supplied with hoop rod are for drywall. |
Can the mounts be mounted into tile | I would say yes as long as you drill the tile carefully and hit a wall stud. I mounted on drywall. Some of my mounting holes missed the stud. I used molly's (sp) on those holes. If all the force is pulling on the tile and not a stud, it could pull the tile off. |
So, this is good for only Roku Ready Tv's? And, it does NOT require a special remote? | Yes, the tv has to be Roku ready and no special remote is required. Its super easy to use! |
So, this is good for only Roku Ready Tv's? And, it does NOT require a special remote? | The remote for a Roku Ready TV will have the necessary controls for this model so a special remote will not be required. If you are interested in playing games on the the Roku, you may want the 3400R model which comes with a motion sensing remote specifically for the games. I only use mine for streaming so the TV remote works just fine. |
So, this is good for only Roku Ready Tv's? And, it does NOT require a special remote? | It works in the MHL port on my LG 32LN530B. (Currently no LG TVs are certified as "Roku Ready") On YouTube there's a review of the Streaming Stick working on a Samsung TV (no Samsungs are certified by Roku either). Apparently Roku is being unnecessarily difficult with the certification. My advice is if you really want one and your TV has an MHL port, try it even if it's not on Roku's list. You can always return it if for some reason it doesn't work.It uses the navigation buttons on your MHL-equipped TV remote. No special remote is required. |
So, this is good for only Roku Ready Tv's? And, it does NOT require a special remote? | It requires a specific type of port on your tv. Not an hdmi port!. I have an insignia tv, the box recommended this streaming stick specifically. I use the tv remote with, works great- I love it! But if you are not sure if you tv has this port- I would go with the roku box. |
So, this is good for only Roku Ready Tv's? And, it does NOT require a special remote? | I'm wondering the same Laura. I don't see a huge market for a Roku ready TV. I'm not going to buy a TV every time a new "stick" of some kind comes out. I have the Roku 3 and a Chromecast. Guess I will stick with those. The issue I have with my Roku is that DirecTV does not have an agreement with them so I cannot view HBOGO. A huge thing for me and I wish I'd known before switching from Dish. The Chromecast does allow for me to watch HBOGO and it's portable. :) |
the bottle is 60 count so do they 2 bottles for the 120 count? | I am sorry but I really do not understand this question. It seems to me that if you need 120 capsules you would need to purchase two bottles at 60 count. It also depends on how many daily you take but I am not sure that I would exceed two and would assume that one daily is a normal dose, two for adrenal fatigue or exhaustion. |
the bottle is 60 count so do they 2 bottles for the 120 count? | The bottle I have is 120, they probably just used the wrong picture. My doctor was having me take two in the morning and two in the afternoon initially, moved me up to 9 a day for a while and I am back down to 4 (total). So I like the higher count bottles too!! |
Will this work on a door with a 1 1/2" backset? | I believe so - there were multiple pieces included to adapt the lock set to multiple dimensions. |
Will this work on a door with a 1 1/2" backset? | I used this on a standard screen/storm door and it worked fine, I don't remember the backset. But if you can find what a standard screen door has it should apply. |
Will this work on a door with a 1 1/2" backset? | Wish I could answer you Mike. Not a locksmith or remodeler. Many, many little parts to deal with, and I consider myself mechanically inclined.. My storm door had the original unit installed - but improperly installed. The dead bolt was jammed to the point where I could not lock the door. My thought was to simply buy the unit from Amazon and simply replace the dead bolt portion and everything would be fine. Not the case. The entire unit was improperly installed, not just the dead bolt portion. Most probably my the remodeler who hung the door. The hardest part for the locksmith was to keep adjusting the original mounting screw holes - with a specialty drill bit to expand the original holes in the door frame to get to the point he could shim it to make it operate correctly. Took him close to an hour to do this. Worth the money. And my storm door had a roll-down screen which made the decision to save the unit and make functional was a no-brainer. |
How do I connect a Schosche HPRF1 wireless headphone to this TV? | I dont think you can directly, at least I could not. Cant believe Samsung sells TVs with no audio output. I was able to connect my Sennheiser headphones up to the cable box audio output and accomplish the same thing. |
the Has Whatsaap installed, but when I went to get an error updating the date not to activate the Whatsaap try to uninstall and not allowed to do | Best thing to do with this junk is put it in the first trashcan you can find. That is what I did with this so called cell phone. If you keep it good luck getting anything good it. |
What are the outside dimensions? | From the floor to the top is 37 1/2 inches. From the back to the front is 17 inches. Across the front from left to right is 29 1/2 inches. Hope this helps. |
Does this work with iPhone 4S? | Most likely No. The docking mechanism is specific to the IPAD so unless the iphone 4s has the same type of port it won't work. |
Can you fit CD jewel cases into this case? Multi-disc jewel cases? | Regular cd jewel cases yes if you sit them in it vertically but you wont get that many in each row and it would considerably increase the total weight when full. Even when full with just discs in the plastic sleeves it does weight quite a bit for a light weight case. |
Can you fit CD jewel cases into this case? Multi-disc jewel cases? | It's not really designed for them. It has a hanging holder file system that locks when you close the lid. In order to maintain control of jewel cases you would have to keep it almost completely full |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.