query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Is there a draw cord at the waist | yes it is for the battery holster. The day I receive it, the heat worked on all levels in the jacket with 10.8 and 12V batteries. I put the jacket in the closet and I used the holster to power up my phone for couple times. After that, the holster did not power up the jacket again, even with other batteries. |
Is there anything gender specfic about this product? | No, it is pretty much a generic looking watch.....but, I do not recommend it! It only works about every 5 times you touch it and I am sending back for a refund! I bought just for the Heart Rate feature and I am very dissapointed. |
Is there anything gender specfic about this product? | I am not exactly sure what you are getting at; but the monitor can be set for male or female users (see http://www.timex.com/watches/timex-health-touch-heart-rate-t5k470f5). |
It arrived but it doesn't nwork. I followed the directions and nothing happens when I spray. | This product was one of the best "misters" I have ever used. It still works perfectly. You have to pump it every time you use it - and pump it alot at first. |
It arrived but it doesn't nwork. I followed the directions and nothing happens when I spray. | Only fill the jar halfway with oil. You need air in there also to compress. I pump mine about 6 to 8 times and it sprays oil for about 15 seconds which is enough to lightly cover a 10 inch frying pan. When using on the outside grill, I have to pump and spray about three cycles to cover the whole grill. I use a light grade vegetable oil. I would guess some of the thicker olive oils would be too much for this sprayer. |
It arrived but it doesn't nwork. I followed the directions and nothing happens when I spray. | Did you use just oil or have oil & spices? I've been using mine for months with no problem. I have to pump it pretty much every time I use it. Sorry yours doesn't work. I'd send it back. |
It arrived but it doesn't nwork. I followed the directions and nothing happens when I spray. | You have to pump it until it get hard to pump. Make sure that you do not have the oil going up the tube. Have it on a flat surface and pump it until it get hard and make sure that you do not over fill it either or it will not pump. There is a line that tells you how much oil to put in. Hope this helps you. |
is this threaded at both ends? | Yes it is threaded on both ends. Remember though you will have to tighten up a set screw after you thread each end. Sometimes the end that is attached to the ceiling is secured by a pin w/ a cotter pin to secure it. |
Does this paint puff up | It did not puff up. It stayed the thickness that I squirted onto the material. |
How many chicken wings will fit in the basket to fry together? | I love this fryer. We put about 6-8 wings at a time, closer to 10 if the wings are small. Last week we even made the best potato chips in the machine. We shaved a potato and fried them. Best potato chip I ever had. |
How many chicken wings will fit in the basket to fry together? | The amount of chicken wings that would fit in the BDF500XL Smart Fryer is entirely dependant upon the size of the wings themselves and how they are being cooked. We recommend no more then 6 to 8 at one time. |
How many chicken wings will fit in the basket to fry together? | The amount of chicken wings that would fit in the BDF500XL Smart Fryer™ is entirely dependant upon the size of the wings themselves and how they are being cooked. We recommend no more then 6 to 8 at one time. |
does it include charger as well? | it will charge any apple product. It comes with an adapter for iPads, but I phones and I pods can be seated and charged while the unit plays. The Unit itself has a AC adapter and must be plugged in to be powered. |
does it include charger as well? | It is Bluetooth, you can charge your phone while listening - however it does need to be plugged into an outlet - it is not battery operated |
Does this work on 2007 Mercedes Benz E-350? | If your connection is in the glove compartment, not the armrest, this should work. |
Up to what speed can you get with the Free 1GB per month of High Speed Internet? | The 1.5 was always amazingly optimistic for me. I have a tower so close I could hit it with a slingshot and the specs say best reception available. From http://testmy.net Download :: 4.6 Mbps 573 kB/s up arrow Upload :: 1.4 Mbps 175kb/s at 430 am when there is probably no other demand. When I was paying for 3x it would get approx 1.5. |
Up to what speed can you get with the Free 1GB per month of High Speed Internet? | According PhoneNews.com (search for FreedomPop), up to 1.5M bits/sec. I think if you pay the extra $4/month for "Speed Boost" you might be able to get faster speeds for the same service level. Also, note that signal strength can have an impact. Since I have the fastest service and am lucky to get maximum signal strength, I can't provide any real world numbers. |
Can you tell me the ESN number?\ | YOU must buy the phone tem send me message Via Amazon and I will supply you with MEID ( ESN ) |
Is this $4.55 for one ball? | We have it priced at $1.49 with the Hobby MarketPlace. Click on the 28 new from $.99 button to direct you to our item. |
Where can I get a replacement platform for this machine? The plastic base has cracked and crumbled. | I returned this machine as soon as I got it!! It was not a full body vibration. Only felt on bottom of feet. |
does this smelting pot allow or have a hole in bottom to poor directly into a bullet mold or do you have to scoop and poor the lead into a mold? | If you look at the picture, the black knob on the side opens and closes a hole on the bottom of the pot. With this model you do not have to pour the lead by hand. |
does this smelting pot allow or have a hole in bottom to poor directly into a bullet mold or do you have to scoop and poor the lead into a mold? | This particular model has a spout located at the bottom to pour directly into your molds. No need for a ladle to get the lead into the molds. |
does this smelting pot allow or have a hole in bottom to poor directly into a bullet mold or do you have to scoop and poor the lead into a mold? | This melting pot has a drop spout at the bottom of the pot which allows for dispensing a molten lead directly into the cavity mold. It is important to allow this melting pot to heat up thoroughly so as to free the spout of any cold lead that may obstruct it from pouring properly. Heat up time is usually about 15 to 20 min. (with a full load of lead). |
How well does the bather dry? Is that fabric on the outside? | It drys really well, it's cloth type material with what I would assume is a spong on the inner side. Gets really heavy when wet but features a removable hook for hanging to dry or when placing in a washer to clean. |
How well does the bather dry? Is that fabric on the outside? | I used it every night, would squeeze out at the end of bathtime and hang to dry on the tub handle with the included hanger. By the following night's bathtime it was almost completely dry and I live in a humid climate. Yes the whole cover is a meshy fabric. |
How well does the bather dry? Is that fabric on the outside? | After a while the fabric starts to smell and does become moldy. Fabric is on the outside. |
How well does the bather dry? Is that fabric on the outside? | Honestly it's not a bad buy @ all. Considering how fast ur child will grow. My boy loved it & has already out grown it. It machine washer safe so clean it once a week to prevent a smell or mold. |
How well does the bather dry? Is that fabric on the outside? | In the beginning I loved it. But after a while I didn't feel it was very clean. |
How well does the bather dry? Is that fabric on the outside? | It's vinyl ... Kinda ugly compared to picture to, we love Amazon but sent this back and got a Karabue folding tub instead $ 50 but worth it;) |
How well does the bather dry? Is that fabric on the outside? | Yes, it's a fabric on the outside. To help it dry, I squeezed it out as much as possible and hung it by the hook that it comes with. It's heavy when wet and needs to be hung up to dry properly. When I propped it up inside the tub, it didn't dry as well and got stale smelling. I just soaped it up and washed it and it was fine after that. |
Would this be appropropriate for a 9-year-old? | I bought this for my 1 year old about 6 months ago. The bar seems to be the right height for her to hang on to and bounce. She will be 2 in a few months. I think I would invest in something different for a 9 year old unless they have trouble with coordination and balance. |
Would this be appropropriate for a 9-year-old? | Possibly. My daughter is 5 and its perfect for her. I believe it may be a little small for a 9 year old. |
Would this be appropropriate for a 9-year-old? | Yes. My nine year old grandson enjoys it. It says it has a 100 pound limit, but I think it would work beyond that. Giving a nine year old several years of use. It is 4 foot in diameter, which seems quite big in a small room. They would not be able to do much other than jumping. It isn't big enough to do much else. Great for using up kid energy. |
Would this be appropropriate for a 9-year-old? | It's too small for a 9 year old. It can handle the weight though, my husband and I have each jumped on it while playing with our 3 year old daughter. |
Would this be appropropriate for a 9-year-old? | I have used a trampoline this size for my kids ranging 10 - 5 years-old for years. I'm not sure if the bar will be well placed for a child that old, but the size works just fine for my eldest. |
Would this be appropropriate for a 9-year-old? | My first grade girl can still use it but it is getting on the small side for her. I'd say more the 2-6 crowd as well. |
Does remote work both light and fan / separately | Hi Mayra,Thanks for the question. Yes, the remote works for both light and fan separately, but from the same remote. We hope this helps. Mayra, if you have any other questions, or would like to place an order, please reach out to one of our awesome experts. Not only do they know everything, they're also literally sitting right next to their phones right now :)Hansen Wholesale1-800-201-1193 |
Does remote work both light and fan / separately | Hello Mayra,Thank you for your message and interest in the Minka Aire F1000-ORB Dyno Ceiling Fan. The full function remote controls both the fan speeds (3-speeds), on/off as well as independent control for the light kit.Thank you. |
Does remote work both light and fan / separately | yes--it's very easy to operate--the remote works both the fan and the light--two separate buttons. |
Does remote work both light and fan / separately | Hello! The remote does indeed control the light and fan separately. If there is anything else we can help with, please let us know! Lighting and Locks 1-800-334-5804 |
Does it have VESA Holes on the back of it so it can be mounted to a wall? | My son who purchased this monitor checked it for me and says yes, there are holes on the back so that it can be mounted to a wall. Hope this helps :) |
Does it have VESA Holes on the back of it so it can be mounted to a wall? | There are 4 holes that I have an monitor arm (swingaway) attached. I wanted to use this arm for easy movement etc. |
Does it have VESA Holes on the back of it so it can be mounted to a wall? | Yes, there are four holes on the back that could be used to attach it to a mount |
Are they made in Germany or china? | I don't recall if the Continental tubes I had problems with were made in Germany or China. I switched to Michelin Airstop Butyl tubes, avail on Amazon, and have had excellent results. The Michelin tubes have a 52mm valve but that is more than long enough for most applications. |
My car is 4 doors. How many modules does the unit come with? | One control module with two remotes. I installed it in a van with four locking doors. The kit does not include the lock actuators just in case that is what you meant. |
My car is 4 doors. How many modules does the unit come with? | If you are asking about power lock actuators the unit doesn't come with any. This unit simply pulses a command to your current system to lock/unlock the doors, regardless of how many doors you have. If you do not have power locks you need to buy actuators separately and have them installed before you install this keyless entry system. power door lock actuators are about $4 each, but wiring and mounting them can be a pain. |
My car is 4 doors. How many modules does the unit come with? | This does not come with motors, only the triggers to switch the locks. If you car was not fitted with them, they must be fitted also before this can be used. |
could this be used with two external microphones on 1 camcorder? | It's designed to send the signal OUT the 2 female jacks not IN. That being said, it may work, and the volume sliders could control levels if the mics. I don't have small mics to test it. |
Would I have to feed each sheet manually? | The scanner is very portable, and this prevents it from havinga sheet feeder. So yes, you do. Even at that, I found it much fasterthan using a printer/scanner and turning the sheets over, which makesa rather hard to use file. |
Would I have to feed each sheet manually? | The scanner is very portable, and this prevents it from having a sheet feeder. So yes, you do. Even at that, I found it much faster than using a printer/scanner and turning the sheets over, which makes a rather hard to use file. |
is 13 the same size as 13A? New to hearing aids.. and p13? is that also the same size as 13A? | I've not heard of 13A or P13. I would ask where I purchased my hearing aids, about those type batteries. I do know that 312 are smaller than 13. Sorry I can't be more help. |
is 13 the same size as 13A? New to hearing aids.. and p13? is that also the same size as 13A? | According to the doctor who fitted my mother's hearing aids, any hearing aid battery with the no. 13--regardless of additional letters--will fit devices that use 13s. I think the only thing you need to be careful about is if you use rechargeable batteries. The doctor did say something about the designation on those, but my mother went with disposable, so I'm not sure. |
is 13 the same size as 13A? New to hearing aids.. and p13? is that also the same size as 13A? | Battery size 13 is the standard hearing aid battery and thus readily available. (I like the way these Duracells are packaged.) I've never heard of 13A. If the customer's audiologist told him/her to use 13A, he/she should ask the audiologist what this means and if standard size 13 batteries would work. |
is 13 the same size as 13A? New to hearing aids.. and p13? is that also the same size as 13A? | I have the same question... my hearing aide purchase package came with batteries labeled 13A. Now I am finally out of them two years later, and can only find 13's. They have to be the same. The original packages say "Premium Zinc Air 1.4v" on them. (generic, with my Audiologist office name). I think I am OK with 13's... Actually, I do remember my audiologist saying anything with a 13 will work. My original 13A's have orange packaging by the way.Fascinates me how many people type an answer having absolutely no information to add. Do you get a bonus for just saying something? I have the same question... my hearing aide purchase package came with batteries labeled 13A. Now I am finally out of them two years later, and can only find 13's. They have to be the same. The original packages say "Premium Zinc Air 1.4v" on them. (generic, with my Audiologist office name). I think I am OK with 13's... Actually, I do remember my audiologist saying anything with a 13 will work. My original 13A's have orange packaging by the way.Fascinates me how many people type an answer having absolutely no information to add. Do you get a bonus for just saying... » Read More I have the same question... my hearing aide purchase package came with batteries labeled 13A. Now I am finally out of them two years later, and can only find 13's. They have to be the same. The original packages say "Premium Zinc Air 1.4v" on them. (generic, with my Audiologist office name). I think I am OK with 13's... Actually, I do remember my audiologist saying anything with a 13 will work. My original 13A's have orange packaging by the way.Fascinates me how many people type an answer having absolutely no information to add. Do you get a bonus for just saying something? « Show Less |
is 13 the same size as 13A? New to hearing aids.. and p13? is that also the same size as 13A? | The first package of size 13 batteries I opened were short lived. Subsequent packages have given good service. Perhaps the first packet had been on the shelf longer. My hearing Aides specify #13. I don't know about the 13A. |
is 13 the same size as 13A? New to hearing aids.. and p13? is that also the same size as 13A? | If I can remember correctly, there are 4 types of sizes, and each are color coded for easy identification. If your hearing aids require a size 13, and you select that size, it is a correct selection. No matter if there is an alphabet letter before or after the number. When you go purchase batteries, notice the other sizes and the color coded. I believe the colors are blue, orange, yellow, and brown. I hope this information has helped. |
is 13 the same size as 13A? New to hearing aids.. and p13? is that also the same size as 13A? | I ordered these for my Dad so I'm not sure at all. I do know it replaced several of the old sizes but I just cant offer anything other than that, sorry. |
When you get your blade to the sharpness that it is time to use the Ultra Fine triangle stone about how many stroke on average do it take to finish? | Depends on the blade. Knife steels vary in their hardness and have differing requirements. Usually, I don't count. It takes me about 5-10 minutes on the fine and ultra fine stones to get my blades super sharp. YMMV. |
When you get your blade to the sharpness that it is time to use the Ultra Fine triangle stone about how many stroke on average do it take to finish? | It all depends on the blade's material. Overall, not many passes per side are required. |
When you get your blade to the sharpness that it is time to use the Ultra Fine triangle stone about how many stroke on average do it take to finish? | I agree with the last comment. Generally if you have a good edge from using the fine white rods, then about 20 strokes on each side using the Ultra Fine white rods should work. I would also consider stropping after as well though some thing the Ultra Fine is equivalent to stropping. |
When you get your blade to the sharpness that it is time to use the Ultra Fine triangle stone about how many stroke on average do it take to finish? | That will vary a great deal depending on the hardness of the blade. I am one of those always looking for that last little bit of sharpness, so I've spent up to 5 minutes with the ultrafine stones. But the results seem to be about as good as they can get after two minutes or so. I don't count strokes, sorry. |
will an ipad 3 with zagg keyboard case fit in this product? | Yes it should fit. I have the IPad with retina display and I also have a keyboard that goes with it and they both fit in the case. |
will an ipad 3 with zagg keyboard case fit in this product? | I have a lenovo thinkpad that is 11.1x8.3 inches and about 1 inch deep. It fits fine inside this case, which is very cute. Measure your device and if the dimensions are similar, you shouldn't have problems- it's pretty stretchy also, but I wouldn't want to put something with bigger dimensions inside. HTH |
will an ipad 3 with zagg keyboard case fit in this product? | Sorry, I don't know if the zagg keyboard case would fit because I don't know the dimensions. You might want to ask the seller that question. |
how dos it work wiith the Ford Snyc system? | My understanding is that the Ford Sync interfaces with your choice of cell phones. If you purchase the correct version of the Wilson Signal Booster for your particular cell phone provider it should work great and provide much better phone and internet signal strength while traveling in marginal cell coverage areas. I regularly see 1 bar go to 5 bars after plugging the amp in and placing my Samsung 4 on ATT into the cradle. |
how dos it work wiith the Ford Snyc system? | This will work in any car or you can wire it in and talk at the bar. You could use it on a boat out for a float, and even a landlocked sailor can use it in his tiny house travel trailer. |
how dos it work wiith the Ford Snyc system? | I took it to the Ford dealership mechanic and they said it was "a piece of junk" |
what age is this for | The game says ages 1-6. We enjoy playing with our grandson who is 11 yrs and some of the questions are very challenging for us adult as well as him. |
what age is this for | This is set up to have different levels of difficulty, from about 1st through 8th grade, so a mix of ages can play. Some adults will find the answers too easy, and since there are not that many cards both adults and kids will simply learn all the answers after a few games. |
what age is this for | It has questions for grades 1-6. I bought this for my preschool niece and she loved it! |
what age is this for | With selective picking of questions my 4 year old can play along with my 6 and 8 year old. |
what age is this for | The grades are from 1-6, so ages 6-12, with varying degrees of difficulty in all of the grade level questions. My 9 and 13 year old daughters have a blast with this game. I sometimes ask a question and don't give the choices to make easier questions slightly more challenging and then we can utilize all of the questions. |
what age is this for | I would say about 5/6 and up. We play it with our daughter and have a blast! |
Does this case protect phone when it is dropped? | The case somewhat protects the phone but ky daughter got aggravated with it after a few days and took it off because the light of the case acted "crazy." It would blink constantly or when it wanted to instead if jut blinking when it was supposed to (ex. It was only supposed to blink when a message came through or a call and it would strobe almost constantly. She wasn happy with it and in my opinion not worth $4 I pd for it. |
Does this case protect phone when it is dropped? | It protects the back but not the front cause it's nothin that comes with it to cover the front |
Will it come off during swimming? | No not unless your rubbing it with a towel I have no eye brows at all I mine has stayed on as long as 2 days with some touch up |
Will it come off during swimming? | I guess that all depends on if you are putting it over existing brows or filling in where there are no brows. I have no ebrows on the ends and I could wash it off with just a wet washcloth. NOt even any soap. But I noticed where I had brows it was a little better. I would not reccommend this product to anyone. |
Will it come off during swimming? | It will not come off during swimming unless oil or oily cream is applied to your face. Or, if it is rubbed or itched. You can touch it and pat dry. I swim a lot and it stays well. |
Will it come off during swimming? | When I run I sweat a lot, and as long as I'm not wiping off my face, it stays on. However, when I shower, it definitely becomes super faint. So I think if you just swim but dab your face lightly when you dry it off you should be fine |
Can you use more than one at different locations at the same time? | Yes, you can buy 1 or 100 and set them up to extend the range of your network as far as you want. |
Anyone know of more comfortable replacement earpads? | Unfortunately, the earpads on that model cannot be removed. I ended up replacing it with a AD900X, which does have replaceable earpads. |
Does this version work with windows 8.1, and will it transfer over projects I used with printmaster 18.1? | You can probably find your answers on the broderbund website. Version 6 is listed as windows 8 compatible, so probably 8.1. Also this statement was on their site, "Please note: Only PrintMaster versions 2011, 2012, 5.0 and 6.0 can be imported into PrintMaster v6 Platinum. Any other version of Printmaster will not load and import into this new program." |
Can you use this on a kitchen gas stove? What material is it made of? | I would say yes. It is made of a thick metal that will withstand heat. I use it on my camp chef stove and also under my dutch oven when camping. Dis-purses the heat so nothing burns. I will be ordering another soon. |
Can you use this on a kitchen gas stove? What material is it made of? | Its made of carbon steel. I used it on the camp chef for cooking roasts when I wanted low heat evenly distributed - worked great. Cant say how it works for a kitchen gas stove - sorry. |
Can you use this on a kitchen gas stove? What material is it made of? | it is made out of metal, so, it gets really hot. I use it on my outdoor range. works great at dispersing heat more evenly.i see no problem with using ir inside, just have to let it cool way down before trying to move it. |
Can you use this on a kitchen gas stove? What material is it made of? | It is made of heavy gauge steal. I'm not sure if it would work on a kitchen gas stove. This item sits directly on the burner. It is meant to diffuse the flame so that the flame is spread out and not so concentrated on one point. It works on our camp stove because the burner is larger than the usual 2"-4" kitchen stove burner. |
Can you use this on a kitchen gas stove? What material is it made of? | It's made of cast iron. It might trap too much heat against the surface of your stove. |
is it compatible to iphone 3 | It will work fine with a iphone 3. They also send you cradles so it will work with a variety of other apple applications. |
Does Bio-Oil tighten loose [body] skin? | I did not experience any skin tightening, but I wasn't really looking for such a change either. I think I would have noticed that though, so I would say no, not really. |
If I only want counts of 100 can I set it up to stop at 100? thank you | Yes, you can set up to amount you wish. U can set up batches of 100 should be easiest for total count. This machine doest'n give a total of amount. |
Is one of its spacers expressly made to go at the bottom of the stack? Is at least one spacer chamfered to mate with the top of this item's clamp? | I do not think so. They are all flat. I had to have at least one extra also. |
My HP3015 has USB and 1284 ports. If I use the USB port for one computer, can I use this 1284-to-USB cable to connect to the 2nd computer? | http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00064723&sp4ts.oid=378048 Answer, dixit HP, is NO, see above HP info. This info comes from above HP web server HP LaserJet 3015, 3020, 3030, and 3380 AiO Series Products - Port Communication The HP LaserJet 3015, the HP LaserJet 3020 and 3030, and the HP LaserJet 3380 all-in-one products include both an IEEE-12848B parallel port and a USB port. The HP LaserJet all-in-one products can be connected with either the IEEE-1284B port or the USB port. NOTE: Do not connect both the parallel port and the USB port to the same computer. Do not connect two computers directly to the same HP LaserJet all-in-one product. Use an HP Jetdirect print server to connect more than one computer to one HP LaserJet all-in-one product. |
Is this for 1 insert or for a pair? | It is one insert that comes in multiple layers so you can adjust to the height that fits you. |
Is this for 1 insert or for a pair? | I had it mailed directly to my Mom and didn't see what's in the package. However, Mom just needed one lift, so I assume it's one lift per package. Sorry I can't be more precise. |
Is this for 1 insert or for a pair? | One full insert per heel. Do not peel layers away. If you find the entire lift too high, then peel carefully. |
What are the dimensions of this canner? | This canner is 11.5 inches across the base. Inside height is 9", not including the lid. The National Center for Home Canning (University of Georgia) states the canner bottom should not exceed the diameter of the burner by more than 2"; they offer an excellent book "So Easy to Preserve" with tested recipes and methods for safe home canning. Jar capacity depends on the size of jars (1/2 pint, pint and quarts). I've used this canner to process jams and pickles - the only complaint I have is when processing quarts the lid allows boiling hot water to "spit" out around the lid. Last night I had to constantly monitor and soak up hot water that landed on the kitchen floor and range top. Since I have a glass top range I inspected the canner thoroughly upon arrival, feeling the bottom for any imperfections - I felt a tiny "burr" which I managed to rub out using fine emery cloth. |
What are the dimensions of this canner? | The base diameter is 11.5 inches. The exterior height is about 9.5 inches with my tape as the steel base is recessed a bit. The "best for the buck" induction cooktop I found and purchased in 2014 is the WHIRLPOOL model marketed through IKEA. Its' largest "burner" with "booster" power is 9.5" in diameter. When I contacted IKEA, they said that there is is a loss of efficiency (my words) with a pot overlapping more than 1.5 inches of diameter. With my 2 inch overlap a quart of water in the canner boils in 1.5 minutes for 1/3 the energy of conventional electric burners at 5280 feet above sea level. Love both products. The base diameter is 11.5 inches. The exterior height is about 9.5 inches with my tape as the steel base is recessed a bit. The "best for the buck" induction cooktop I found and purchased in 2014 is the WHIRLPOOL model marketed through IKEA. Its' largest "burner" with "booster" power is 9.5" in diameter. When I contacted IKEA, they said that there is is a loss of efficiency (my words) with a pot overlapping more than 1.5 inches of diameter. With my 2 inch overlap a quart of water in the canner boils in 1.5 minutes for 1/3 the energy of conventional... » Read More The base diameter is 11.5 inches. The exterior height is about 9.5 inches with my tape as the steel base is recessed a bit. The "best for the buck" induction cooktop I found and purchased in 2014 is the WHIRLPOOL model marketed through IKEA. Its' largest "burner" with "booster" power is 9.5" in diameter. When I contacted IKEA, they said that there is is a loss of efficiency (my words) with a pot overlapping more than 1.5 inches of diameter. With my 2 inch overlap a quart of water in the canner boils in 1.5 minutes for 1/3 the energy of conventional electric burners at 5280 feet above sea level. Love both products. « Show Less |
What are the dimensions of this canner? | These are approximate dimensions: Circumference 40" at center, height 9 3/4" w/out lid add another 1 1/2" for lid which includes the knob, width is 17 1/2" end of handle to end of handle, 13" not including handles, inside diameter 12 1/2". Again, these are approximate measurements. |
How many come all together? | Hi Angela, it is one apple and one button...a pair only. I have requested the silver one and it is very nice. Hope this helps. If you need more information please let me know.Thanks! |
I don't see if it comes with or without saucer. If not, is there any to match this cups? | http://myhome.bormioliroccocasa.com/en/products/easy-bar/easy-bar-cup-espresso-10-cl.html They sell these saucers... I don't know if this comes with it? I just bought it for my father and trying to find the saucers myself. They have them on their website, but I cannot find anywhere to buy them. Please let me know if you find out where I can buy them. Thank you |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.