query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
is this product 24 inches tall? | My cat is 13.5 lbs and he enjoys laying on the top section. Mine is sturdy, I bought another one after liking the first one. |
is this product 24 inches tall? | Yes, that is about right. It is fairly small all over. If you have a large cat it probably won't work. The actual beds are not very comfy. I had to put extra padding on top. Even with doing that my cats do not like it and rarely use it. It is a cute product but not worth the price. |
is this product 24 inches tall? | it is - it seems smaller though, in person if that makes sense. I have had it for a few months now, and my cats (14 lbs & 10 lbs) rarely go on it which is too bad, but they do seem to enjoy scratching the columns! |
is this product 24 inches tall? | Actually, I measured it AGAIN and with rigid calculations, I found this product to be EXACTLY 23 INCHES TALL. |
what are the dimensions of these sleeves, in inches? | These will fit a magic the gathering, pokemon, yu gi oh size card comfortably. Which are all approximately the size of a bicycle poker playing card. |
what are the dimensions of these sleeves, in inches? | Unsure of exact dimensions but they fit a Magic the Gathering card or a baseball card perfectly - so anything larger wouldn't fit and anything smaller would slide around inside. |
what are the dimensions of these sleeves, in inches? | 2 5/8" x 3 1/2". Perfect height to fit a standard playing card, but a just a tiny bit too wide. |
Is assembly difficult? | Not difficult. I'm 76, have a bad back and have difficulty getting up and down. As mentioned, the more tedious process is getting the box unpacked and organized. I have a small utility table that I was able to use for most of the construction so that I didn't have to get up and down off the floor. I took a lot of breaks, but was able to finish the assembly in less than a day. Total work time was probably 3-4 hours. This is a great grille and worth the time it takes to put it together.The delivery guy came late at night and was kind enough to put the box on my back patio. The box was very large and weighed over 200 lbs, so I would have had a difficult time with it otherwise. Not difficult. I'm 76, have a bad back and have difficulty getting up and down. As mentioned, the more tedious process is getting the box unpacked and organized. I have a small utility table that I was able to use for most of the construction so that I didn't have to get up and down off the floor. I took a lot of breaks, but was able to finish the assembly in less than a day. Total work time was probably 3-4 hours. This is a great grille and worth the time it takes to put it together.The delivery guy came late at night and was kind enough to put the box on my back patio.... » Read More Not difficult. I'm 76, have a bad back and have difficulty getting up and down. As mentioned, the more tedious process is getting the box unpacked and organized. I have a small utility table that I was able to use for most of the construction so that I didn't have to get up and down off the floor. I took a lot of breaks, but was able to finish the assembly in less than a day. Total work time was probably 3-4 hours. This is a great grille and worth the time it takes to put it together.The delivery guy came late at night and was kind enough to put the box on my back patio. The box was very large and weighed over 200 lbs, so I would have had a difficult time with it otherwise. « Show Less |
Is assembly difficult? | Actually getting everything unpacked is more difficult than assembly. The instructions are quite good and clear. It helps to have a socket wrench with an Allen bit just to speed things up. It took me a bit over an hour working by myself. |
Is assembly difficult? | Much easier than I thought. The illustrations made it clear. It'll take as much time to unpack and lay everything out as it will putting it together. |
Is assembly difficult? | I found the instruction manual very easy to follow. There are a lot of parts and some you may need a partner to lift. However, the instructions are well written. I'm usually the type of guy who always puts something on backwards and doesn't realize until almost the end. Didn't happen here. You don't know me but trust me that speaks for something! |
Is assembly difficult? | Not so much "difficult" as it is timely. It took my husband and my father a little over two hours to get it assembled. |
Is assembly difficult? | The popular answer seems to be 'not for me' - (it really is a pretty simple item) I always assemble whatever I buy. I know the nuts are tight, things don't leak etc...You understand the way it works and that helps down the road. Take your time - have enough space and lay out everything. Have a good set of tools (not many) and enjoy it. Then reward yourself with a great steak tonight |
Is assembly difficult? | No. Even I am not a craftsman, it took me a little more then an hour. There is also a vry nice video on YouTube explaining how to assemble this great grill. |
Is assembly difficult? | For me it was not. It did take me over a hour but I enjoyed it and the parts went together very well. By putting it together I understood why I paid so much for it. I was impressed with the quality of the parts. |
Sauna Shirt: Is there a womens version? | The Kutting Weight clothing is unisex and the measurements are the same for both women and men. You measure your chest in inches and compare your measurements to the size chart in the image area. |
How long does it take for this battery to be delivered?.. Is it fast or does it take long? | It ships the same business day if the order is processed and released to us by Amazon by 3 pm ET. Delivery timeframe depends on the shipping method that you choose and where you are located. It will show you an ETA at the checkout. |
How long does it take for this battery to be delivered?.. Is it fast or does it take long? | If you order from liquid pc it will take 2-3 business days if the order is placed by or before 1pm est. |
How long does it take for this battery to be delivered?.. Is it fast or does it take long? | I can drop it in the mail tonight, and it can be to you by end of week most likely! |
How long does it take for this battery to be delivered?.. Is it fast or does it take long? | We offer same day shipping as long as the order is processed before 3:30 pm PST. |
Is this coffee pot white or black with stainless ? The pic shows white and the description says black. I need the black. Your help is appreciated | This comes in either white OR black. If the description says Black..then that's the color you'll get. |
Is this coffee pot white or black with stainless ? The pic shows white and the description says black. I need the black. Your help is appreciated | The coffee pot/decanter/carafe is clear glass. Our current machine is stainless with black trim. Our previous 15 year old model was entirely black plastic. Be sure you specify you want black only. |
I'm confused as the directions say to hammer the spikes 2 inches below the ground service. Is there a plastic tool that comes in the bag to help you? | No, we just set it apprrx. 4" away from roots and drove it into the ground. |
I'm confused as the directions say to hammer the spikes 2 inches below the ground service. Is there a plastic tool that comes in the bag to help you? | There should be a plastic cap that fits on the end that's squared off. Put it on the spike and gently tap it with your hammer. |
Will it fit a 2 peice 9ft rod | Yes it will fit Two 9ft rods as Lind as the Rods are not one solid piece. I keep one 9.5 two piece in there and one four piece as well |
is it 4.12lb or 7.1lb? | I purchased this computer for someone in our office. It had problems with the screen and didn't function properly, so we returned it (it was purchased in February '13 and returned it within days). Sorry to say, I have no idea what the weight was. |
On the Cub Cadet website, the part number is 0918-04125B - is this a fit or does the "B" on the end make a difference? | the part fit perfect,but had to change all three spindles, as the new one was a bit shorter than my original ones. changed all three for an even cut. |
On the Cub Cadet website, the part number is 0918-04125B - is this a fit or does the "B" on the end make a difference? | Nope... not a problem... you are replacing the whole thing, so there is nothing to mismatch.. |
would these be good for outside work in the ice,water..etc maybe to wear over socks to keep your feet dry & warm? | Yes, I am a Dairy Farm Inspector. I wear them for the exact reason, to keep my feet dry in the winter, from snow, ice and water. I cannot wear them in the summer, they get way to hot. |
Hi, could you tell me please if the head of the tuning wrench is fixe? | Is it fixed? Bit of a typo on your question I think you missed the "d". If that is what you meant it does unscrew at the base of the sphere, however I have tuned 3 pianos from a 1923 baby grand Brambach to a 1963 Cable upright and it has work great on all of them. It's got a star shaped slot that is quasi-universal. It does telescope as well however if THATS what you meant. Hope I didn't sound too pretentious and I could help. The kit overall is great quality. The best for the money that I could find. If you are just starting out the only other thing you may want is a couple more wedge mutes (although they aren't really all that necessary). And a good book. "Piano Servicing, Tuning, and Rebuilding" by Arthur A. Reblitz is a fantastic resource with just about everything you need to know, then some. There are also great practice exercises for the beginning tuner. |
Hi, could you tell me please if the head of the tuning wrench is fixe? | Yes. The head is fixed at slightly greater than 90-degrees to the handle. There is no universal joint or pivot pin. I had plenty of clearance on the upright that I tuned. |
Hi, could you tell me please if the head of the tuning wrench is fixe? | I don't understand your word "FIXE". Nevertheless, the head is exactly the same as the much more expensive ones (>$100) which I used before. The head is tightened into the handle by screwing motions. |
Hi, could you tell me please if the head of the tuning wrench is fixe? | I used this kit to tune my piano and had no problems with the head of the wrench. This kit was well worth the money I spent on it. |
How wide can the Y arms reach? E.g., If I make a T shape, how far apart will a pair of the male ends reach when stretched out? | Don't know why someone said only use with 2 to 3 panels at the most -- these adapters are obviously meant to connect 4 panels into a single output cable. What really counts with a solar panel is the maximum amps of current it will put out -- rating a panel in watts is just a convenient marketing term, since most people think they know what "watts" are because we've all changed a light bulb. But "watts" is simply what you get when you multiply a panel's maximum volts by its maximum amps. The seller of these adapter cables specified their amp carrying capacity in another answer and said: The adapter has four input cables and a single, thicker combined output cable with its copper conductor diameter measuring 3.42 mm (equivalent to a gauge 10 AWG), rated to carry 40 amps by the very conservative NEC - National Electrical Code, which is used for all residential building codes in the United States. Assuming the seller measured the diameter of the copper conductor correctly, then the limiting factor is the 40 amps of combined current the output cable can handle. So you could connect 4 panels to this adapter, each with a maximum output of 10 amps, and safely have a total combined current of 40 amps running through the output cable. Someday we may have consumer solar panels which output more than 10 amps, but the most you will see any panel put out right now is 3 to 8 amps. This 4-into-1 adapter cable was designed to do a specific job and seems perfectly capable of doing it. Of course, you would have to be sure that whatever cable or device you plugged the output cable into was also able to handle the maximum combined amps that your 4 connected panels would be producing. |
For those of you who have had this bed for a year or more, how is it holding up? How often do you have to tighten the bolts? | We definitely have to tighten the bolts regularly, but it still seems sturdy despite this fact. |
For those of you who have had this bed for a year or more, how is it holding up? How often do you have to tighten the bolts? | I tighten the bolts on this bed atleast once a month! My son is 50lbs and only uses the bed to sleep in at night. It is not used as a jungle gym nor trampoline, like most beds kids do. |
For those of you who have had this bed for a year or more, how is it holding up? How often do you have to tighten the bolts? | We have had ours since December and it's holding up great; haven't tightened the bolts yet! |
Dont know if this has been answered already: Does the Samsung Note 4 fit ? It is slightly larger than the Note 3. Thanks. | I have an LG g3 and it fits but there is not a ton of room left. That is a very good question. It would be very close |
Dont know if this has been answered already: Does the Samsung Note 4 fit ? It is slightly larger than the Note 3. Thanks. | I had an s4 with an otterbox and it was snug. I now have a s5 which is a little bigger and without an otterbox there is enough room. Since u have the note u might have to go up a size on the holder |
can it post pictures to facebook? | This camera does not have built in wifi so you have to first transfer the pictures to another device (computer, iphone, iPad) to be able to send it to Facebook. I'm told (but haven't checked) that the newer model, the SX280 HS, does have built in wifi. I don't know whether that would direct posting to Facebook but would hope that this is a function. You might want to check the Canon site if you're thinking of the 280 for that purpose. |
can it post pictures to facebook? | There may be other ways to do it, but this is how I post to fb. Download pictures to my computer. Go on to fb select download/create album. You have to know where you saved the pictures, fb will give you prompt to browse and you go to where you saved the pictures. You then select the pictures you want and "open" them, they will upload to fb. |
can it post pictures to facebook? | Mary-I am one of those old timers who does not use facebook. So, I do not have an answer. |
What is the best way to get an older (5) dog to use the potty tray? She is used to only going outdoors. | I trained my now 10 year old dog to do this at about 7 years old. It sounds gross but when he peed outside I soaked some of his pee on a paper towel and swabbed it in the ugodog. Then when I knew it was about time for him to pee, I would take him to the ugodog and say, "go pee pee" which is what I used to say to him outside when he would pee. And then I would give him treats when he would pee on the ugodog. He's been really great about it ever since. |
What is the best way to get an older (5) dog to use the potty tray? She is used to only going outdoors. | I am not sure actually! My dog was 10/11 when he started using it and only uses his UGDOG now unless I take him out. Maybe help her out by placing her on the UGODOG so she can get used to it. You can maybe even buy one of those sprays that attract her urintating on the area it's placed. Hope this helps. |
What is the best way to get an older (5) dog to use the potty tray? She is used to only going outdoors. | Mine is 14, and I used treats as an incentive. I'd keep placing him on the potty and say to go potty then treat him, and even though he's not crazy about it; he uses it, which is wonderful for me. I love it, he's likes it when I am not mad at him which makes the process easier. He did make a few mistakes but no one is perfect. Mine will go out if outside and use his indoor potty inside. |
Does it have a auto switch to shut off if water level gets low? | I don't know about an automatic switch but it has an actual water gauge view very visible and easy to read on the front |
Does it have a auto switch to shut off if water level gets low? | I really can't answer this, we have had it for 8 months now, and have never let the water level stay empty or too low. Sorry. |
Will this work with a dimmable switich? | I would think so as long as you have dimmable bulbs. But I really like mine, they replaced the nasty apartment ones & a great price! |
Does it spin on its own or only if you wind it? How long does it last once it's wound? Can you take off the brown plush covering on the arms? | You have to wind it. It lasts about 45 seconds. You can remove the brown covering. |
Does it spin on its own or only if you wind it? How long does it last once it's wound? Can you take off the brown plush covering on the arms? | You do have to wind it. Once you wind it, it lasts 2-3 minutes. You can take the covering off of the arms. |
Does it spin on its own or only if you wind it? How long does it last once it's wound? Can you take off the brown plush covering on the arms? | Only if you wind it , you can take off the brown covering and the circles , it plays one song for probably a minute and half to 2 min |
Does it spin on its own or only if you wind it? How long does it last once it's wound? Can you take off the brown plush covering on the arms? | It does not spin on its own, when I wind it up it automatically spins but I think its because I'm winding it up. I dont know how long once it winds up the music last, since my boys aren't here yet, I just did a quick wind up, it is pretty loud. The brown plush covering on the arms is removable in face when it came I had to put on the brown plush on each arm. Also the dangling design is interchangeable, and you can replace the sticker on the winder or pout one over it. All in all I couldn't complain for the price, and honestly the mobiles only get used until they stand up and then they tend to pull it down, lol. I hope this helps! It does not spin on its own, when I wind it up it automatically spins but I think its because I'm winding it up. I dont know how long once it winds up the music last, since my boys aren't here yet, I just did a quick wind up, it is pretty loud. The brown plush covering on the arms is removable in face when it came I had to put on the brown plush on each arm. Also the dangling design is interchangeable, and you can replace the sticker on the winder or pout one over it. All in all I couldn't complain for the price, and honestly the mobiles only get used until they stand up and then they tend... » Read More It does not spin on its own, when I wind it up it automatically spins but I think its because I'm winding it up. I dont know how long once it winds up the music last, since my boys aren't here yet, I just did a quick wind up, it is pretty loud. The brown plush covering on the arms is removable in face when it came I had to put on the brown plush on each arm. Also the dangling design is interchangeable, and you can replace the sticker on the winder or pout one over it. All in all I couldn't complain for the price, and honestly the mobiles only get used until they stand up and then they tend to pull it down, lol. I hope this helps! « Show Less |
Does it spin on its own or only if you wind it? How long does it last once it's wound? Can you take off the brown plush covering on the arms? | Only if u wind it, and I wanna say it goes for about 2 mins, and yes, u can remove the brown corduroy covers. :) |
Does it spin on its own or only if you wind it? How long does it last once it's wound? Can you take off the brown plush covering on the arms? | 1. It doesn't spin on its own.2. I haven't timed it but it's not too long.3. Yes you can take it off, or just don't put it on. The mobile requires some assembly. |
Will this work for my RCA rt151 stereo?? | Sorry, I'm not sure. It worked for my Mom's RCA TV, but she lives 2 states away & I never looked at the instruction manual to see how it would work with any other devices. |
Are there any available replacements for the ear tips? I've managed to misplace one and looking to buy a compatible ear tip or an oem set. | The ear tips are standard tips for this kind of ear piece. If you have a old set of ear pieces and they are the cushion type, they should just simple push on. Hope this helps. |
Does a double-size sheet fit on this? | I'm not sure what a double size sheet is. However, all of our fitted queen size sheets work on it. They have between 13 and 16 in drop at the corners and fit fine. I was once told that if you buy a thread count of 400 or greater, they usually have deep corners. I usually ask the clerk to open the package for examination. |
Does a double-size sheet fit on this? | I would go with a queen size just so it can fit all around since the bed us an inflatable |
Keep getting no toner left message in lbp6030w. what to do? | Open the printer cover and pull out the toner. Shake it a few times and put it back. Try to print and see the message is clear. |
Keep getting no toner left message in lbp6030w. what to do? | You can also simply rock the toner gently at a 40 degree angle, pat it gently on top, and replace in the machine. Please do not shake your toner too hard, might cause toner to spill. Make sure the unit is sealed properly. And like suggested above, try another unit. |
Keep getting no toner left message in lbp6030w. what to do? | We purchased 3 125 cartridges for the price of one at Staples. They all work great with no issues. |
Keep getting no toner left message in lbp6030w. what to do? | You could try to take out the toner and shake it smoothly and then re-install again. |
Keep getting no toner left message in lbp6030w. what to do? | The cartridge I got works great. Is yours seated properly? Remove it, shake it and put it back in. |
Keep getting no toner left message in lbp6030w. what to do? | Obvious causes: The cartridge is empty. The cartridge is not seated properly. The cartridge is faulty. I'd try a different or new cartridge. (The one I got worked great... but it is possible you got a bad one.) |
What is the diameter of (a) the bottom, and (b) the top rim? | Not sure. But even though these did work alright I would suggest gettin the ones with the lids! The rims weren't as sharp as these ones plus when making an abundance of Jell-O shots its really easy to just throwem in a bag and go! Plus they're better quality then these. When I received these some of them were cracked. |
What is the diameter of (a) the bottom, and (b) the top rim? | The bottom is about the size of a quarter and the top rim is the size of a 50 cent piece. |
what color is the got the blues for red? | got the blues for red is a dark red, with bluish (not pink, orange, or brown) undertones -- i landed on this page randomly and saw your question and, since i am wearing 'blues for red' right now, wanted to describe/recommend... it is beautiful. no sparkles/no pearly-frosty situation, just a wine-dark red. |
Where does the grease from meat go? Does it have a removable grease tray?? | I do not have a Masterbuilt Electric grill - I do have a Charbroil Electric Grill and it does have a removable grease tray |
Where does the grease from meat go? Does it have a removable grease tray?? | There is a "grease collection drawer" that slides in and out behind the grill |
Can a headboard and footboard be attached easily to this bed? | It is not designed for a headboard. But it is solid wood, not a composite . . . so I make a few changes and added a headboard. I bought a 12" piece of hardwood, stained it to match (even though you really can't see the added board). I cut it to length and then I screwed it to the existing "headboard", letting it drop down below the present board. Then I bolted my headboard thru both pieces. So far so good. The price is so right and the wood so attractive, I am glad I took a couple of hours to add the piece and put my headboard on it. I hope this is clear enough to help you. |
Can a headboard and footboard be attached easily to this bed? | I did attach an antique headboard. I just screwed it in after it was put together. |
Can a headboard and footboard be attached easily to this bed? | Well... if you wanted to drill holes and screw them together, sure. There isn't any sort of built-in brackets or anything. |
This Case is made of Aluminium,does the inside of it scratch the iphone body ? or there are other materials that separate between them ? | Nope, there's soft touch plastic on the inside, no marks are left on the phone. |
This Case is made of Aluminium,does the inside of it scratch the iphone body ? or there are other materials that separate between them ? | It's like a plastic rubber inside, so no, it does not scratch the phone. :) Hope this helped. |
This Case is made of Aluminium,does the inside of it scratch the iphone body ? or there are other materials that separate between them ? | Yes, all aluminium. I'm not sure this case scratches the body cause i didn't uncover it yet... and the back of this case (as you can see in the picture), there are 3 parts of it ; The top, middle, bottom parts. The top and bottom parts are a little bit soft surface and the middle is prickly. Anyway all of the parts are easy to be scratched i think. After 1 month using it, i've got several scratches... |
This Case is made of Aluminium,does the inside of it scratch the iphone body ? or there are other materials that separate between them ? | It's made of soft rubbery plastic. So no scratching. There is an aluminum piece just on back that isn't glued properly, so the ends stick out. |
does this memorex 52x 700 mb 120 mm record 120 minutes of music? I see 80 min on the label. | Dear P. Brenna, 120mm is the outer diameter of the actual disk. So no, this does not have anything to do with the actual recording time. 80 minutes of recording a playable CD is what you will get. Hope that helps. Bob |
does this memorex 52x 700 mb 120 mm record 120 minutes of music? I see 80 min on the label. | The quick answer is, No. Actually if you are recording a full CD's worth of music, the actual length will be slightly less, say 78 minutes, with gaps between the tracks and space used to finalize the disc. Also, I think that the specification of 120 mm that you mentioned refers to the diameter of the CD disc, which is 120 mm. I hope this answer helps you out. |
does this memorex 52x 700 mb 120 mm record 120 minutes of music? I see 80 min on the label. | The label is right....you can record up to 80 minutes total of music on these CD-Rs |
does this memorex 52x 700 mb 120 mm record 120 minutes of music? I see 80 min on the label. | It just holds 80 minutes....I have been unable to find an extended length lightscribe CD but would love it if I could! Best, MIckey |
does this memorex 52x 700 mb 120 mm record 120 minutes of music? I see 80 min on the label. | Dear P. Brenna, 120mm is the outer diameter of the actual disk. So no, this does not have anything to do with the actual recording time. 80 minutes of recording a playable CD is what you will get. Hope that helps.Bob |
does this memorex 52x 700 mb 120 mm record 120 minutes of music? I see 80 min on the label. | No, It only records 80 min of wav file music. But if you record as a data cd you can get several files on the disc. You can only play the music in a computer or mp3 player. |
does this memorex 52x 700 mb 120 mm record 120 minutes of music? I see 80 min on the label. | the memorex 52x700 mb 120 mm there very clean and sound good. Aghop Kessissian |
Mountain Lion: Will Adobe Photoshop Lightroom 4 run on Mac OS X 10.8? | Yes. http://blogs.adobe.com/photoshopdotcom/2012/10/windows-8-and-photoshop.html |
is it breathable and what is the temp. range for this blanket? | I live in the Pacific Northwest... not too cold, but LOTS of rain. It is made out of water repellent canvas (not rubber)and quilted material underneath, so unlike the former respondent... I'd say, "Yes, it IS breathable", or it'd be WAY to warm to wear in our mild winters. I like this coat, and bought a second one so the first one can dry out on rainy days. |
is it breathable and what is the temp. range for this blanket? | not really breathable because their waterproof. I take them off when it gets in the 20's so they don't get too warm. these are easy to put on and stay on really good. kept the horses warm and dry and we've been down to -15, had freezing rain and lots of snow. I'm very glad I got em. hope this helps. Michelle |
does it have reverse | No. No reverse. I agree with everyone else about this. It is heavy. It has to be pushed a bit to unlock it. It won't work for the choke. I doubt I will have this in 5 years. I will make sure I buy a different type. |
does it have reverse | No power reverse. If you have to reverse you need to unlock the drive system by releasing the self-propulsion handle just before the end of the area you are cutting, & then finish it by pushing forward manually for the last few inches. It will unlock & easily pull back at that point. I've never seen a self-propelled walk behind mower with power reverse. Must be a safety issue thing. |
does it have reverse | No. You should know that jn order to pull it backwards you must release the self-propulsion handle, push the mower it forward just a bit to free the front wheels from the drive mechanism. If you don't, the front drive wheels will drag without turning. I agree with Scott. I am looking to get rid of the thing. |
does it have reverse | No reverse.You have to release the forward drive lever and then push slightly forward to disengage the drive system, then pull back manually. That works ok but the machine is fairly heavy for a lot of backing. |
Is it easy to uninstall, if you live in a rental? | I agree with Tim. They're great product. Four small screws and they're out. However, I recommend you just press the switch on the latch part to avoid having to use the magnet (you will see a green sticker). That disengages the latch so it opens and closes freely. |
Is it easy to uninstall, if you live in a rental? | They install with 4 small screws so it is fairly easy to uninstall. There will be holes where they were though so I would check with your landlord before you start drilling into the cabinets. |
Is it easy to uninstall, if you live in a rental? | Yes it is easy to uninstall however you have to use a drill to drill through the cabinets or drawer so you would have to fill that in afterwards. The other word of warning is that it does not work on some cabinet types. If you have 2 doors that open outward, they need to have the middle bar behind them. If nothing is between you'll have to have space above the cabinet to mount the backside. Our first house cabinets did not let us use these. |
Is it easy to uninstall, if you live in a rental? | Yes, it's literally 4 screws and there out. It's a great product, my daughter is 23 months old and about 24 pounds and hangs on my cabinet doors and these things don't budge.Solid product. |
Are these men or women sizes? | Giro lists them as mens' gloves on their homepage. Anyway, Giro has very accurate sizing guides with inch/centimeter specifications for both genders. So, you should be able to figure out whether any of the mens' sizes will fit your hands (I hope the links are not deleted by Amazon...): http://www.giro.com/giro/fitguide/gloves/men_glove_fitguide.pdf http://www.giro.com/giro/fitguide/gloves/women_glove_fitguide.pdf Their guides were very accurate in my experience. Btw: I really like these gloves. Good quality. The pads are positioned properly and will prevent numb hands. |
Are these men or women sizes? | Giro lists them as mens' gloves on their homepage. Anyway, Giro has very accurate sizing guides with inch/centimeter specifications for both genders. So, you should be able to figure out whether any of the mens' sizes will fit your hands (I hope the links are not deleted by Amazon...): http://www.giro.com/giro/fitguide/gloves/men_glove_fitguide.pdfhttp://www.giro.com/giro/fitguide/gloves/women_glove_fitguide.pdfTheir guides were very accurate in my experience.Btw: I really like these gloves. Good quality. The pads are positioned properly and will prevent numb hands. Giro lists them as mens' gloves on their homepage. Anyway, Giro has very accurate sizing guides with inch/centimeter specifications for both genders. So, you should be able to figure out whether any of the mens' sizes will fit your hands (I hope the links are not deleted by Amazon...): http://www.giro.com/giro/fitguide/gloves/men_glove_fitguide.pdfhttp://www.giro.com/giro/fitguide/gloves/women_glove_fitguide.pdfTheir guides were very accurate in my experience.Btw: I really like these gloves. Good quality. The pads are positioned properly and will prevent... » Read More Giro lists them as mens' gloves on their homepage. Anyway, Giro has very accurate sizing guides with inch/centimeter specifications for both genders. So, you should be able to figure out whether any of the mens' sizes will fit your hands (I hope the links are not deleted by Amazon...): http://www.giro.com/giro/fitguide/gloves/men_glove_fitguide.pdfhttp://www.giro.com/giro/fitguide/gloves/women_glove_fitguide.pdfTheir guides were very accurate in my experience.Btw: I really like these gloves. Good quality. The pads are positioned properly and will prevent numb hands. « Show Less |
Are these men or women sizes? | I believe these are men's sizes, very good product, saved me from serious hand injury when I clipped a protruding branch with my handlebars. If you are a medium, try a men's small, should fit ok. |
how many cm is the dress length? I want to see if there is any chance of this fitting my 7 year old. | Sorry, I don't have access to the dress now but I don't think it will fit a 7 year old. It barely fits my niece. She is 5 and has a small build and is short for her age. |
how many cm is the dress length? I want to see if there is any chance of this fitting my 7 year old. | All I know is it fits the average kid my granddaughter is 9 and it fits her and she is small for her age |
how many cm is the dress length? I want to see if there is any chance of this fitting my 7 year old. | If the dresses are less than a size 6, I fear they will be too small - can you check size? |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.