query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Does anyone know how to mount this underneath a pedal train PT Pro board? I just got another one of this power supply, and I don't have space for it. | May not be the most popular answer but on my homemade pedal board I just used velcro to attach the power supply to the bottom. Also if there are screws on the bottom check out this method: http://xmidi.com/bicycle-chain-links-as-velcro-alternative-for-guitar-pedal-board/ I have used this to attach pedals to my board and it is rock steady. |
What kind of Zinc is used? | I tried calling the number on the bottle (800-276-2878), but they were unavailable in a staff meeting, then closed when I tried again. The recording says they are available 7-4pm Pacific time. The bottle says only zinc 5 mg. |
What kind of Zinc is used? | Sorry but I did'nt know there were different kinds of zinc. The bottle does'nt say what kind. I had to stop using it bcause it made me constipated ( the calcium) and sometimes I felt nausea taking it. Good luck. |
What kind of Zinc is used? | Back of container only says Zinc Sulfate and in each tablet there is 5mg (33%) of zinc. For future info you can usually click on the picture of the container and enlarge the picture to better see the label and this includes the back with the ingredients and supplement facts. I love this capability as it helps me make an educated purchase decision. I will research zinc because I did not know that there were different kinds. |
Capacity Question: How many gallons? How many gallons of propane does this tank hold? | The previous answer is wrong. A gallon of propane weighs 4.2 pounds. This tank holds 11 pounds of propane, which is approximately 2.6 gallons. Standard 20 pound tanks hold 4.8 gallons. |
how many applications(boxes) are in this for $81.00 | One box is sufficient for one application. The color also comes with a large tube (about 5"-6" long) of conditioner, an applicator bottle in which you mix another solution from a very small container. I like Natural Match because there is no ammonia smell. |
how old is this model | It's the original one that can only he updated to OS 5.1.1 and that's it. It's good for music and will only work with some apps but it's actually better to purchase ipad2 I regret buying the ipad1 |
how old is this model | It's an old unit. I bought it for my kid. He wasn't looking for retina displays or upgrades. Just games. |
is there sugar in this | Yes, there is sugar in each variety. If you click on the link for this oatmeal, you can pull up an image with a detailed breakdown of the oatmeal's contents. |
How good is VG-1 at least in reference to the Cold Steel Master Hunter? I have an older model in SK5 that has performed really well. Not familiar with VG-1 yet hear it's a less expensive form of VG-10. | VG-1 (V Gold 1) isn't the same steel as VG-10 (V Gold 10). With a hardness of 58-61, VG-1 holds a good edge. It's a strong premium steel that won't disappoint. You'll get years of good performance out of the CS Master Hunter and at a good price point. Compare to the Fallkniven F1 in 3G laminate steel. |
does this work with the garmin edge 1000? | Not absolutely certain but it works with all other Edge units so unless Garmin has changed the mount design you should be fine. |
does this work with the garmin edge 1000? | Probably, assuming Garmin standardizes on their mount attachment hardware configuration which seems highly likely to me. But I don't know for sure. |
does this work with the garmin edge 1000? | This works with all of the quarter-turn Edge models: 200, 500, 510, 800, 810, 1000. Due to the fact that this holds the computer above the level of the handlebars, yes it will accommodate the longer Edge 1000 body. |
does this work with the garmin edge 1000? | From what I've read as long the device has the garmin twist and lock feature it should work. |
is it adjustable for different head sizes? | Yes it is. It's like a one size fits all cap. You pull it open as wide as you need and it tightens up as necessary. |
How does Amazon ship this? Is it refrigerated when it comes (packed in dry ice?) or room temp? | Unfortunately, Swanson Health Products does not ship any products in cooled environments or dry ice. If a product requires refrigeration, it is stored as such in our warehouse. We have found that delivery the time frame is not long enough to damage the quality or potency. -Swanson Health Products |
How does Amazon ship this? Is it refrigerated when it comes (packed in dry ice?) or room temp? | Here is what Barlean's says, taken from their website: Do you ship the oil refrigerated? Does the transit time affect the oils?Either high heat (over 300 degrees F) or sustained heat over a very long period of time can degrade Omega-3 oils. The relatively short transit times and variable seasonal temperatures encountered during transit have been found to be insignificant when tested extensively. Even shipments arriving in summer heat waves can be assured as being potent and undamaged. |
How does Amazon ship this? Is it refrigerated when it comes (packed in dry ice?) or room temp? | In speaking directly with the manufacturer they indicate when shipping it does not need to be on ice, but recommend refrigerating it upon arrival for continued freshness. |
I already have a Delta showerhead with hose and mount. Are hoses and mounts universal? Or do I need to buy a Kohler hose and mount? | This is only the hand held head. No hose comes with it. Your existing hose should fit. |
I already have a Delta showerhead with hose and mount. Are hoses and mounts universal? Or do I need to buy a Kohler hose and mount? | I'm not 100% certain, but I believe you'll need to buy the Kohler hose and mount. Even if the hose would connect with the shower head, I'm pretty sure it would not fit properly in the holder. But, you will very much like the Kohler mount. It had a trigger release to make it easy to adjust the height and, once in place, it is solid. My wife and I bought the Kohler head beause of he mount, not the other way around. However, the head is very nicely designed. |
I already have a Delta showerhead with hose and mount. Are hoses and mounts universal? Or do I need to buy a Kohler hose and mount? | It works with a regular hose, but you might need a Kohler mount. Now, I'm using a standard delta mount, but the handle is quite heavy and sometimes it falls out. |
Is this a base unit which plugs into a wall outlet or is this an "accessory" add-on phone? | base unit must sit on the counter or table. Don't know if there is an accessory or not. |
Would this fit an adult and a child? Adult is 145 lbs, child is 85 lbs. I know the weight capacity will be ok, but would we be comfortable? | I am 6 feet tall and weight 300+ and it fits me just fine and is very comfortable. It is about 30 inches wide so it might be a little narrow for two people. |
Would this fit an adult and a child? Adult is 145 lbs, child is 85 lbs. I know the weight capacity will be ok, but would we be comfortable? | I slept in this tent cot for a month it was just enough space for me I'm around 140 lbs. It would be very tight maybe ok for a night if you don't mind snuggling in close. |
Would this fit an adult and a child? Adult is 145 lbs, child is 85 lbs. I know the weight capacity will be ok, but would we be comfortable? | Yes, indeed, it can hold a total of 400 lbs. It's a wonderful invention! I would not hesitate to make its purchase. In fact, we plan to buy more of them. |
Would this fit an adult and a child? Adult is 145 lbs, child is 85 lbs. I know the weight capacity will be ok, but would we be comfortable? | Without seeing the both of you it would be difficult to say. I can say this , I am 6' 3" at 250 pounds . I fit very nicely with my boots at the end of the cot, two sleeping bags ,One under one over and my motorcycle jacket as a pillow. Hope this helps. |
Would this fit an adult and a child? Adult is 145 lbs, child is 85 lbs. I know the weight capacity will be ok, but would we be comfortable? | Tight squeeze for sure. Maybe if you slept at either end. Might want to explore other options. |
Does it get rid of tobacco smoke? | Nothing can rid your house or furniture of tobacco smoke except ceasing the behavior. I don't smoke so don't know if this purifier helps. I can say from living in a mobile home, it pulls a whole lot out of the air! I couldn't live without this machine. |
Does it get rid of tobacco smoke? | I use it in an closed in office where there is no smoking but I believe it would. Everyone says the air just smells cleaner in my area. |
does this case come with a stand so u can watch movies | The built in stand allows for 2 viewing angles, one at about 45 deg & one about 15 deg |
does this case come with a stand so u can watch movies | it does have a built in stand attached to the cover can be used at angle to watch movies andplaced other way to read books. |
does this case come with a stand so u can watch movies | Yes it comes with a hard cover than turns into a stand to watch your tablet |
Does anyone else have a problem with the rubber around the bottom of this phone case losing it's shape ? | Apparently any oils/lotions interact with the silicone and cause it to lose its shape after a bit. |
Does anyone else have a problem with the rubber around the bottom of this phone case losing it's shape ? | yes! mine has also stretched around the entire frame. did not know they would replace, I will be calling to check on that! |
Does anyone else have a problem with the rubber around the bottom of this phone case losing it's shape ? | I have had mine now for about 3 or 4 months and I have not had any kind problems like your asking about. |
Does anyone else have a problem with the rubber around the bottom of this phone case losing it's shape ? | No problem with rubber seal. I live in a very windy and sandy place and every couple months I have to take it apart to clean behind outside lens. I once broke the belt clip getting out of the car and the service getting it replaced was something out of the 70's. Very friendly fast and free. I would buy another one any time. |
Does anyone else have a problem with the rubber around the bottom of this phone case losing it's shape ? | I've had mine for a little over a year and the bottom is loose. My husband's is also. Not a huge deal, but I would buy something else if I knew it would not do that. |
Does anyone else have a problem with the rubber around the bottom of this phone case losing it's shape ? | Yes. Absolutely! It's good for one slight boil in hot water. It works pretty good for a brief moment, then definitely needs replacing. |
Does anyone else have a problem with the rubber around the bottom of this phone case losing it's shape ? | Yes!!!!! It is a terrible problem. I'm on my third replacement and this last one, otterbox themselves said the rubber material was a better compound but that has proved false. The rubber lasts 6 months. And I am in no way rough with the case. My suggestion, get on the phone with otterbox and let them know the issue. Tomorrow I will be calling for my fourth replacement. Also, there is an issue with the external protective screen losing its adhesive power along the edges. I don't get it but its been an issue. Since this is my fourth replacement, they should be replacing it with the better, more expensive, rugged case. I had them notate it onto my account. I will say, otterbox has 5 STAR customer service. Yes!!!!! It is a terrible problem. I'm on my third replacement and this last one, otterbox themselves said the rubber material was a better compound but that has proved false. The rubber lasts 6 months. And I am in no way rough with the case. My suggestion, get on the phone with otterbox and let them know the issue. Tomorrow I will be calling for my fourth replacement. Also, there is an issue with the external protective screen losing its adhesive power along the edges. I don't get it but its been an issue. Since this is my fourth replacement, they should be replacing it with the better,... » Read More Yes!!!!! It is a terrible problem. I'm on my third replacement and this last one, otterbox themselves said the rubber material was a better compound but that has proved false. The rubber lasts 6 months. And I am in no way rough with the case. My suggestion, get on the phone with otterbox and let them know the issue. Tomorrow I will be calling for my fourth replacement. Also, there is an issue with the external protective screen losing its adhesive power along the edges. I don't get it but its been an issue. Since this is my fourth replacement, they should be replacing it with the better, more expensive, rugged case. I had them notate it onto my account. I will say, otterbox has 5 STAR customer service. « Show Less |
will this fit a 2000 ford explorer sport? i know they usually sell the 4 door kits to the 2 door owners. | I purchased this kit and later found out while looking on the Daystar website for instructions that this kit does not fit my 2001 Explorer Sport 4x2. I haven't started the project yet but will post when I complete it. Waited too long and now can't even return them. Sure hope they fit because if not lots of money wasted. |
Can we make crushed ice (snow ice) from ice cubes? | You could but I wouldn't expect the machine to last very long doing that kind of work. If you want snow like ice I would find a machine specific to that task and you will need to pay more money for a high-end machine. |
Can we make crushed ice (snow ice) from ice cubes? | You can crush the ice, but it will not be the same consistency as snow cone ice. We do not recommend using your BCCG08-RM1-000 to make snow cones. |
will the software work on Windows 8? | It installed fine on my Windows 8.1 laptop. The lessons CD works fine, but bear in mind, for actually hooking the keyboard up to your computer, it's designed for use with MIDI software. |
will the software work on Windows 8? | Hi Ruth, i honestly do not know. i used a program named cakewalk, (Sonar) and this allowed me to record the keyboard, guitar and vocals through an interface named m audio. it was fairly simple to setup and use, but the equipment, all together, was pricey. |
do you have a problem with the plastic tracks? would you get a metal gearbox/tracks? | My Tank never would work, tried to fix it never got it to work. Its in my closet in it box.Peter, |
do you have a problem with the plastic tracks? would you get a metal gearbox/tracks? | Thus far, I have have no problems with the plasic gearbox or tracks; however, I would caution that I have only run the tank indoors and for a short trial period. While I have not experienced any malfunctions or concerns with the plasitic tracks and gearbox thus far, my personal opinion is that a metal gearbox/tracks would be in an operators best interest, because it decreases the possibility of future malfunctions and operates more smoothly. I hope this helps. |
do you have a problem with the plastic tracks? would you get a metal gearbox/tracks? | Sorry to hear others are having problems also. Metal tracks would be an option. Otherwise a complete refund would be in order as this was not an inexpensive tank. Thank you. |
How much exposed jack shaft must be available? | I only hah 3" on my shaft wich was just right .My brother had 4" on his shaft and that was fine the shaft can go inside the unit about 2 " so you don't have to cut the shaft. You just don't wat to mount the unit to close to the door track my unit is about 1" from the track |
How much exposed jack shaft must be available? | Do you have the instructions cause it says in the instructions ? I will try to find mine if you don't have them |
How much exposed jack shaft must be available? | I think and will double check but I want to say there was about 3" from the bearing surface that I slid the unit on to. This was a VERY easy install, once I hung the unit and squared it up every thing just fell into place. The instructions are online and a great vidieo on youtube. |
How much exposed jack shaft must be available? | Do a google search of "Liftmaster 8500 manual" and look at page 3 for all the pre-installation requirements. I found this link: http://www.liftmaster.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A4565.pdfOn that page it gives this answer: The torsion bar must extend at least 1-5 inches (2.5-12 cm) past the bearing plate. This may vary depending on your installation requirements. |
How much exposed jack shaft must be available? | depends on how close you can put the motor. About 2-3" should be enough.One word of advice, as a die hard DIY guy, I would suggest you let a professional installer do the installation. This is a tricky one to adjust and tune properly. I'm glad I didn't install it myself. |
How much exposed jack shaft must be available? | Do a google search of "Liftmaster 8500 manual" and look at page 3 for all the pre-installation requirements. I found this link: http://www.liftmaster.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A4565.pdf On that page it gives this answer: The torsion bar must extend at least 1-5 inches (2.5-12 cm) past the bearing plate. This may vary depending on your installation requirements. |
Is the DLC on a separate disk or download via codes? | They're preloaded. No codes needed, just play the game and any DLC will already be present in the game. What a concept, pay the price for a game and get everything without worrying about paying to play for more of the game. |
Is the DLC on a separate disk or download via codes? | Each game has a separate disc with the DLC. Before you play the game, just put the disc in your Xbox and it will install all the DLC. It only takes a few minutes for each one. |
How can I get a copy of the manual for the separator and butter maker? Also for spare parts in the future? | Contact the sellerOr email me at [email protected] and I will send you file of the one that came with mine. Spare parts may be a issue. |
How can I get a copy of the manual for the separator and butter maker? Also for spare parts in the future? | Contact the seller Or email me at [email protected] and I will send you file of the one that came with mine. Spare parts may be a issue. |
Does this fit the iphone 5? One of the reviews says it does not. | It does, although its obviously "made" for the 4/4s. I don't use it, because (humble brag) it doesn't fit my bicep well. My wife uses it regularly. |
Does this fit the iphone 5? One of the reviews says it does not. | Yes! Fits perfectly. I sweat a TON and I haven't had any problems with mine either. I got the impression from a lot of the reviews that this would be an issue, but it isn't. I would buy this again. |
Does this fit the iphone 5? One of the reviews says it does not. | Yes it fit the phone just fine. My gf uses it every day and has not had a problem. fits just the phone, no case on phone. |
Will this bowl work with the 550 professional model? | For use with 6 Quart Bowl Lift Mixers (Models: KP2671X, KP26M1X, KB26G1X, KP26M8X). |
Will this bowl work with the 550 professional model? | not sure, it was a challenge to get the correct size, kitchen aide has a pamphlet that uses the model number for the correct part (bowl, beater, etc.) I would suggest using that. |
Will this bowl work with the 550 professional model? | This bowl is made for the 6qt models. if you wanna make sure please do contact the manufacturer |
Will this bowl work with the 550 professional model? | Yes, I have the 550 model with the 5.5 quart bowl and this 6 quart bowl works perfectly. All the attachments work as well. The clearance of the attachments is the same as in the 5.5 quart bowl. |
does it have a usb port? | If you mean a port for attaching a mouse or charging another device, then, no, it doesn't. It only has a connector port for charging the battery. |
is this a pair on just one please tell me if i have to buy two@ 141.01 $$ | It is a single, universal strut; you will need to buy one for each strut you plan to replace. |
is this a pair on just one please tell me if i have to buy two@ 141.01 $$ | The price is for one, you need to buy two if you're replacing both front struts, replacing both is the only correct way to do the job.Our new struts perform perfectly so far.Paul |
Can this item be used to convert coaxial cable line in to HDMI out to TV | This item takes the component signals that come out of your cable box or DVD player and formats them for HDMI. The signal on your coax is is a combination of everything and can't be directly converted to an HDMI signal. It needs to go through the cable box to isolate the signals for the particular channel that you want to watch. Hope that helps. |
Can this item be used to convert coaxial cable line in to HDMI out to TV | If you are referring to a coaxial cable from your cable tv provider, then no, it doesn't. I initially purchased this unit because I accidentally broke the cable tuner on my LCD when removing it from the wall. I thought I could use this product as a workaround, but couldn't because it doesn't accept the cable tv coaxial cable line. It doesn't fit. Had to return it. If you are trying to achieve what I think you may be trying to achieve, then you need an external tuner or demodulator. Type in "All in 1 CATV coax to hdmi converter" and you are going to see the exact same product on the top three listings on the search results page. The prices will range from $136 to $218. If you are referring to a coaxial cable from your cable tv provider, then no, it doesn't. I initially purchased this unit because I accidentally broke the cable tuner on my LCD when removing it from the wall. I thought I could use this product as a workaround, but couldn't because it doesn't accept the cable tv coaxial cable line. It doesn't fit. Had to return it. If you are trying to achieve what I think you may be trying to achieve, then you need an external tuner or demodulator. Type in "All in 1 CATV coax to hdmi converter" and you are going to see the exact same product on... » Read More If you are referring to a coaxial cable from your cable tv provider, then no, it doesn't. I initially purchased this unit because I accidentally broke the cable tuner on my LCD when removing it from the wall. I thought I could use this product as a workaround, but couldn't because it doesn't accept the cable tv coaxial cable line. It doesn't fit. Had to return it. If you are trying to achieve what I think you may be trying to achieve, then you need an external tuner or demodulator. Type in "All in 1 CATV coax to hdmi converter" and you are going to see the exact same product on the top three listings on the search results page. The prices will range from $136 to $218. « Show Less |
Can this item be used to convert coaxial cable line in to HDMI out to TV | No. The only inputs are the three component inputs, and your choice of spdif inputs (optical or "coax" sound). You'd need some sort of tuner to convert the signal from the coax cable, like a set-top box. There are other devices around that do that, but this isn't one of them. I have a Yamaha stereo receiver with hdmi inputs and one hdmi output. This little device lets me connect an old Panasonic DVR with a component output to the Yamaha, and then just switch devices on the TV with the Yamaha remote (media pc, blu-ray player, DVR). |
Can this item be used to convert coaxial cable line in to HDMI out to TV | If you are referring to a coaxial cable from your cable tv provider, then no, it doesn't. I initially purchased this unit because I accidentally broke the cable tuner on my LCD when removing it from the wall. I thought I could use this product as a workaround, but couldn't because it doesn't accept the cable tv coaxial cable line. It doesn't fit. Had to return it. If you are trying to achieve what I think you may be trying to achieve, then you need an external tuner or demodulator. Type in "All in 1 CATV coax to hdmi converter" and you are going to see the exact same product on the top three listings on the search results page. The prices will range from $136 to $218. |
Is this hup works for windows too? | I'm using the 4-port hub with a Windows 7 Pro laptop as I write this, so I would assume yes. |
Is this hup works for windows too? | Yes. Hub functionality is not related to operating systems, only to hardware. |
Is this hup works for windows too? | I know it talks only about Mac, but it totally works fine in Windows (all versions as far as I can tell) and on PC's as well as Mac computers. All my windows computers recognized it immediately. And the USB 3.0 IS backward compatible to USB 2.0 and earlier. Hope this helps. |
Is this hup works for windows too? | USB stands for Universal Serial Bus. Yes, it works across all platforms that support USB |
Compatible with 720S-4 ? | I own a 740 but the same base and Renew solutions seem to work for all series 7 shavers. |
Is the cover washable? Can you get different color for the cover? | It has a zipper to remove it but I'm unsure about washing it. I didn't see anything on the tag. You could probably ask the manufacturer. |
Is the cover washable? Can you get different color for the cover? | The cover isn't washable, it's permanently attached as is. I've been told that a regular fitted sheet will cover the bed (I used it for a cross country trip so I didn't use a sheet). As far as different colors, the chair is available in other colors with different sellers. |
Is the cover washable? Can you get different color for the cover? | No, I wouldn't try it. There is a zipper on the larger cushion by the pillow, but it wouldn't be easy to take it out or put it back in. The other two portions do not have zippers anyway. As far as colors, they also have it in black. Good Luck. |
Is the cover washable? Can you get different color for the cover? | I don't think I'd take the foam out to wash the cover even though it does have zippers. I think it came in a couple of different colors like black, pink and blue. |
I do different size loads, do i use a pod for all loads or more then one for a large load??? Thank you, John | You are supposed to use 2 for a large load. For me, they didn't dissolve very well, and I followed the instructions, and the laundry didn't smell clean. Maybe it would work for you better than it did for me. |
I do different size loads, do i use a pod for all loads or more then one for a large load??? Thank you, John | I have 2 auto mechanics in my family which leads to some really nasty clothes. However, I have never used more than one pod at a time. Actually, you should use the water temperature dial, turned to hot, for really dirty clothes regardless of size. |
I do different size loads, do i use a pod for all loads or more then one for a large load??? Thank you, John | I use 1 pod for all sizes,there is no way to break it in 2 for smaller loads and 1 pod works great on xlarge loads.I have never had an issue with getting my clothes clean,thet work great. |
I do different size loads, do i use a pod for all loads or more then one for a large load??? Thank you, John | All you really need is one for every load .but for a little extra you can put in two on the extra large loads .... |
I do different size loads, do i use a pod for all loads or more then one for a large load??? Thank you, John | I also have an extra large sized washer that will accomodate a very large load. Depending on what I'm washing, for example a load of dirty jeans and sweats,then I use an extra pod. However if a big load is lightly soiled, I still use only one and it cleans the clothing quiet well. Hope this helps. |
I do different size loads, do i use a pod for all loads or more then one for a large load??? Thank you, John | The instructions suggest you use two for large loads, One for small to normal sized loads. |
Why so many bad reviews? Want one cheap but a good one. | Don't buy this one then.....trying to find the phone number of the company is like trying to find a needle in a haystack.....bought mine 7 months ago...used it maybe once a month and it crapped out....now I'm trying to get it returned |
What is the space between the shelves? | Hello Celeste! The space between the shelves in middle measure about 9.5" in height. Please feel free to reach out to our Customer Service Department if you have any further questions, Monday-Friday 8am-4:30pm (CST) at (888) 944-8667 or email us at [email protected]. Have a great day! |
Is this product different than My Bouncer Little Castle Bounce 72" L x 72" W x 72" H Ball Pit Popper w/ Phthalate Free Puncture Resist Nylon Material Is the ball pit separate from the bouncer? Is this product different than My Bouncer Little Castle Bounce 72" L x 72" W x 72" H Ball Pit Popper w/ Phthalate Free Puncture... » Read More Is this product different than My Bouncer Little Castle Bounce 72" L x 72" W x 72" H Ball Pit Popper w/ Phthalate Free Puncture Resist Nylon Material Is the ball pit separate from the bouncer? « Show Less | I think the one you are viewing is slightly larger than the one I purchased. Also YES the ball pit is separate from the bouncer. |
what size are the fittings on the end? | There are no fittings on ends. the hose is designed to fit over barbed ends on disconnect valve on pump. you cut hose in half or to fit the length you need |
what is the hardness of the wheels. | Pretty hard I guess. My son is 8 and uses this religiously. He loves it and it's extremely durable. I am not a skate boarder so I don't know much else about other than what I see and he tells me. Great quality and durability. |
what is the hardness of the wheels. | It doesn't specify on the wheel. From my own experience, it is in the 79-82a range@momma2-3. If you loosen the trucks, it will turn a lot smoother. The level of tightness the trucks are tightened is very good for beginners |
Will this work for l9 p796? it says in the product but not product description and just want to make sure | well it didn't work for me. i bought it, put it in my phone, i charged it, it said it was full, disconnected my phone from the battery charger, it didn't last 5 minutes, when my phone started saying low battery. so no. it's not good for me. 😔god bless you |
Will this work for l9 p796? it says in the product but not product description and just want to make sure | I have the same phone and this is the same battery I order back in February, and it works fine. |
Will this work for l9 p796? it says in the product but not product description and just want to make sure | well it didn't work for me. i bought it, put it in my phone, i charged it, it said it was full, disconnected my phone from the battery charger, it didn't last 5 minutes, when my phone started saying low battery. so no. it's not good for me. �god bless you |
Are these a super tight seal? I.e. liquid products like dressings for salads (to place in a lunchbox) would not leak? | I use mine for holding a day's worth of supplements, but I just tried putting water in it and shaking it upside down & sideways, and it didn't leak or spill at all. So yes, it appears that one could put liquids in it. However, that being said, I don't know if it is BPA free & even meant for food substances, but we figured that it's at least ok for for our supplements. |
Are these a super tight seal? I.e. liquid products like dressings for salads (to place in a lunchbox) would not leak? | I really love them but have only used them for paper clips and other stuff. (buttons, etc.) |
Are these a super tight seal? I.e. liquid products like dressings for salads (to place in a lunchbox) would not leak? | I have only used for medication and they seemed to have a tight seal, but I tried to wash on the top shelf of the dishwasher and they warped. If you do purchase you need to hand wash. |
Are these a super tight seal? I.e. liquid products like dressings for salads (to place in a lunchbox) would not leak? | Well I got them for same reason as you and found out they aren't safe for food. So no. Don't buy for salad dressing. |
Are these a super tight seal? I.e. liquid products like dressings for salads (to place in a lunchbox) would not leak? | I have not had any issues with leaks. My wife hasn't had any issues neither and she uses hers for medicine, make up, lotion and other liquids. She also keeps some in her purse and they have never spilled. She carries large purses so these containers really get bounced around. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.