query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
I want to spray paint a picket fence with stain. Will this help reduce overspray and result in less waste? | I think with some work and practice it would save paint. Did enire house and worked great! |
I want to spray paint a picket fence with stain. Will this help reduce overspray and result in less waste? | I bought this sprayer, and it short-circuited on me in quite literally 30 minutes. I wouldn't buy it. |
I want to spray paint a picket fence with stain. Will this help reduce overspray and result in less waste? | Yes, with practice you could spray stain on a picket fence with little waste. But once you start you should plan on doing the whole job. The cleanup after using stain is horrible. |
I want to spray paint a picket fence with stain. Will this help reduce overspray and result in less waste? | I don't know what you are comparing it to, but there are several things that can effect overspray. Wind, distance from the object you are painting, angle of spray, etc. that being said, I found the Wagner to have a reasonably focused spray pattern. I would spray on a calm day and practice on some cardboard with your distance and speed of spray to get it just right. |
I want to spray paint a picket fence with stain. Will this help reduce overspray and result in less waste? | I have not sprayed stain but did use satin latex on our well house/feed shed. I was amazed that I only had a small amount of over-spray on my glasses and watch. It washed right off with DAWN. The hat I was wearing didn't seem to have any paint on it. I would really recommend using latex because the cleanup is about 45 minutes at the sink using warm water. I don't think I want to cleanup oil based paint. |
how long does it run on one charge | Dan is pretty much correct in the time it takes to charge with the stock USB charger. But for the RUN time, it depends on how aggressively/conservatively it's flown. I tend to get between 5 and 8 minutes of flight time before the LEDs blink to warn of low battery voltage and the impending LVC. If you upgrade the transmitter to a spare X4 (version 2) transmitter (see my answer to the 2.4GHz interference and novice flying question), you'll have the ability to switch the LEDs off (and on again) to extend flight time even more (at the expense of being able to maintain orientation in all but the brightest of flight environments, since this vehicle is so small). |
how long does it run on one charge | Dan is pretty much correct in the time it takes to charge with the stock USB charger. But for the RUN time, it depends on how aggressively/conservatively it's flown. I tend to get between 5 and 8 minutes of flight time before the LEDs blink to warn of low battery voltage and the impending LVC. If you upgrade the transmitter to a spare X4 (version 2) transmitter (see my answer to the 2.4GHz interference and novice flying question), you'll have the ability to switch the LEDs off (and on again) to extend flight time even more (at the expense of being able to maintain orientation in all but the brightest of flight environments, since this vehicle is so small). Dan is pretty much correct in the time it takes to charge with the stock USB charger. But for the RUN time, it depends on how aggressively/conservatively it's flown. I tend to get between 5 and 8 minutes of flight time before the LEDs blink to warn of low battery voltage and the impending LVC. If you upgrade the transmitter to a spare X4 (version 2) transmitter (see my answer to the 2.4GHz interference and novice flying question), you'll have the ability to switch the LEDs off (and on again) to extend flight time even more (at the expense of being able to maintain orientation in all but the... » Read More Dan is pretty much correct in the time it takes to charge with the stock USB charger. But for the RUN time, it depends on how aggressively/conservatively it's flown. I tend to get between 5 and 8 minutes of flight time before the LEDs blink to warn of low battery voltage and the impending LVC. If you upgrade the transmitter to a spare X4 (version 2) transmitter (see my answer to the 2.4GHz interference and novice flying question), you'll have the ability to switch the LEDs off (and on again) to extend flight time even more (at the expense of being able to maintain orientation in all but the brightest of flight environments, since this vehicle is so small). « Show Less |
how long does it run on one charge | red light will go out on charger around 20-30min, mines out in 30min but I installed a larger battery. |
how long does it run on one charge | In an amendment to my previous answer, I bought a few of these for family and friends as Xmas gifts. They all report run times of about 3-4 minutes with the LEDs on (they only have stock transmitters). Using a Hubsan X4 transmitter to turn the LEDs off, I get the run times of up to 8 minutes if I fly conservatively (rare) and more normally get about 5 - 6 minutes of MY normal flying (plenty of zipping around and flips if in stunt mode with the X4 transmitter). |
How long do these last? I want to order several boxes to take with me while living abroad. | I ordered 2 boxes of 42 when I caught them on sale. I take one a day and that's it. Depending on how long you will be gone, 42 will last you a month and a half almost. Depending on the severity of your attacks. I would suggest taking at least 180 with you. That would cover 6 months. I hope this helps. |
How long do these last? I want to order several boxes to take with me while living abroad. | It all depends on your condition, and how often your doctor recommends. I have to take 2 a day, so a box of 42 lasts 20 days. So it all depends how long you will be gone, do the math. Hope this helped you. |
How long do these last? I want to order several boxes to take with me while living abroad. | Depends on how much your dosage is. A daily dosage of 20mg is gonna last you about 6 weeks thereabouts. |
How long do these last? I want to order several boxes to take with me while living abroad. | The medication day has a cumulative effect, personally if I take them for a while I can miss the occasional day. However, if I miss more than 2-3 days in a row, the heartburn will come back. I would assume this is probably consistent with more people. |
does your system has every things in the pictures ? | No it did not. It only had one controller and the console box. No games or cords were in the box. I thought they might come in another shipment, but they never did. |
My granddaughter wears shoe size 11 or 12. What size should I buy? What does J12 mean? | Buy a size or two ahead...if the skates are too roomy at first, stuff a sock in each toe. Children grow too fast. These skates are great quality, pretty and safely made |
What are the dimensions of this flask? I'd like to put it in my tactical vest pouch. | It says it holds a pint of liquid. I say it holds a slight bit more. Sturdy. Excellent. The best flask I ever owned. |
What are the dimensions of this flask? I'd like to put it in my tactical vest pouch. | 6 & 1/2" high; 3 & 7/8" wide; 1 & 1/2" thick. Design is curved to resemble hip flask. Fits nicely in hunting shirt pocket, or in rain jacket pocket beside main zipper. Should work well in tactical vest pocket. Flask can be easily painted to suit operator. If freezing water in flask, leave room for expansion, or flask will split. |
Will it read or write a DVD-RAM disc? | It can read standard DVD and CD disks. Not sure if a DVD-RAM is a special format. |
hi. will this screen fit my compaq presario cq57-489wm? | It shoud work if it's a cq57 model. The ending numbers are just different configurations of that model. |
hi. will this screen fit my compaq presario cq57-489wm? | The model number matches and should work. I would only purchase it if you have a return option just in case. |
will this fit in my totota tundra? | i don't know because i gave it as a gift to my brother in law who i haven't for some time |
Trying to replace d/c door. Have wooden tunnel built through wall to outside deck. Would this flap be tight enough to keep out drafts? | No, it is absolutely not "airtight" and should not be used for external usage. |
Trying to replace d/c door. Have wooden tunnel built through wall to outside deck. Would this flap be tight enough to keep out drafts? | It should be fairly decent at keeping out a draft. The flap has a tight fit and catches on a magnet on the bottom. I can't speak on this 100% because our door only separates between our back entryway and kitchen. |
Trying to replace d/c door. Have wooden tunnel built through wall to outside deck. Would this flap be tight enough to keep out drafts? | When the lock door is on it would. But just the flap would probably not keep out drafts. My cat always opens the door with his right paw and that side of the flap does not close tight anymore. |
Trying to replace d/c door. Have wooden tunnel built through wall to outside deck. Would this flap be tight enough to keep out drafts? | it is pretty good at keeping out drafts for as long as the magnet stays strong.... which has been about a year or so for me. I have three cats that are constantly in and out so that could contribute to the life span of the door. I like it and for the price it is darn good but the endurance is reflective of the cost. |
does the case get dirty so easily | Yes it does. I have stopped using the case already. It looks like gray lace now instead of white lace. I dont recommend buying it. |
does the case get dirty so easily | No I haven't had a problem with it getting dirty and I've already had it for a month. |
does this charhing dock fit the xperia z model number c6606? | ...I bought this charger for your phone Sony Xperia Z C6603. So I can not say whether it is suitable charger to your phone .. It is necessary to ask the seller Amazon. They give good advice....My phone charger is working very well. |
two of the tips have fallen off. Does anyone know what size tips are used 12, or 12 mm or something else? | I'm not sure about the originals, but I bought 13MM ones that fit better than the ones that came with the stick. All my original tips fell off in a week or two after I bought these too. |
My AR15 has a fold down "ghost" ring sight at back end of the rail. Does the fold down sight have to be removed to use this scope/ring set? | I believe so, but would have to see a pic of your setup as I'm not familiar with the ghost ring you speak of. Sorry I could not be of more help. Nonetheless, I returned my scope as it was poor quality ang got a UTG red dot sight instead. |
My AR15 has a fold down "ghost" ring sight at back end of the rail. Does the fold down sight have to be removed to use this scope/ring set? | in most cases, as long as the sight rings are at least 1/4" high, the rear folding sight will fit under the scope. I have a different scope but the same rear folding sight and it's no problem. |
My AR15 has a fold down "ghost" ring sight at back end of the rail. Does the fold down sight have to be removed to use this scope/ring set? | I had to remove mine. I'm sure you can rig it to work, but I didn't want to mess with it. They got in the way for me. |
Hi i was wondering is there like a button to push it open | No if it had a button it would not be legal. You have to open it part way by placing pressure on the back end of the blade and then a tortion bar takes over and opens it the rest of the way. |
Can this be ran 2.5 in 3 out? Reversed basically? For 5.7 Tundra using stock piping. | No , due to the fact that it is single in 3 inch dual out 2.5 , the picture that is shown with this model number is not correct, also u may want to consider something besides borla mufflers if u are looking for a more aggressive sound the borla muffler sounds very stock at start up and even at higher RPMS u have more cab noise then u actually have outside noise , I just recently installed the borla exhaust on my 08 gmc sierra Z71 with a 5.3 , Gibson headers, k&n; 57 series cold air intake, Jegs after market throttle body, and jegs MAP sensor, and a superchip flash paq programmer. It's still a very quiet muffler No , due to the fact that it is single in 3 inch dual out 2.5 , the picture that is shown with this model number is not correct, also u may want to consider something besides borla mufflers if u are looking for a more aggressive sound the borla muffler sounds very stock at start up and even at higher RPMS u have more cab noise then u actually have outside noise , I just recently installed the borla exhaust on my 08 gmc sierra Z71 with a 5.3 , Gibson headers, k&n; 57 series cold air intake, Jegs after market throttle body, and jegs MAP sensor, and a superchip flash paq programmer. It's still... » Read More No , due to the fact that it is single in 3 inch dual out 2.5 , the picture that is shown with this model number is not correct, also u may want to consider something besides borla mufflers if u are looking for a more aggressive sound the borla muffler sounds very stock at start up and even at higher RPMS u have more cab noise then u actually have outside noise , I just recently installed the borla exhaust on my 08 gmc sierra Z71 with a 5.3 , Gibson headers, k&n; 57 series cold air intake, Jegs after market throttle body, and jegs MAP sensor, and a superchip flash paq programmer. It's still a very quiet muffler « Show Less |
Can this be ran 2.5 in 3 out? Reversed basically? For 5.7 Tundra using stock piping. | Sure, any competent exhaust shop can make the 3" to 2-1/2 reducer for the inlet and adapters for the tail pipes |
Can this be ran 2.5 in 3 out? Reversed basically? For 5.7 Tundra using stock piping. | I think all straight through design mufflers can be installed reverse. Call Borla directly or a local muffler shop to verify. |
The factory states this lift is rated at 300 pounds why is it listed at 450 on Amazon?? | This link shows the max weight as 450http://www.themojack.com/products/mower-lifts/ez-max.html |
The factory states this lift is rated at 300 pounds why is it listed at 450 on Amazon?? | See this link to Mojack EZ Max which says 450 lbs: http://www.themojack.com/products/mower-lifts/ez-max.html |
The factory states this lift is rated at 300 pounds why is it listed at 450 on Amazon?? | Hi. the manual for this MoJack EZ MAX model 45001 states not to exceed 450 lbs front end weight. so the 450 lbs listed is correct by what the manual says. |
Audio Jack problem? Tried all my headphones, and they used to work on it but now it doesn't recognize them being plugged in. What can I do? | try use mono or stereo headset ... if both didn't works mean ur audio jack has issue ... good luck |
Will this work with a Dell Venue 8 and iPad mini? | Hello, I use this for 3 different Desk tops one is a Dell the other two are made by my son. I also use it for my Dell Laptop and 2 Kindle fire HDs. I love it we use to drop signal with my old router we have no issues with this and also have increased speeds. |
Will this work with a Dell Venue 8 and iPad mini? | I have an iPad Mini and it works fine with this router; I don't know why there would be issues with the Dell Venue. I also have desktop, laptops, iphones and a Kindle connected to this router with no issues |
what is the serial number?my husband is a tech freak and he wants ti male sure it is not fake please for the black one | D2-912_BK Is the model number. The serial number is D201312BK900433. I wouldn't get this tablet, tho. It doesn't work right. The lock screen freezes up, the software is lagged, and the net doesn't always hold. Go for something else that is better. |
Does this model (Technivorm Thermo Moccamaster CDGT with Thermal Carafe) come with the gold filter? | Mine did come with both the gold filter and a box of paper filters. I purchased it from "Willoughby's," however. I don't know what amazon & other outlets will include. |
Does this model (Technivorm Thermo Moccamaster CDGT with Thermal Carafe) come with the gold filter? | The package i purchased came with the coffee maker, gold filter, cleaning solution and some coffee as well. The seller should list out exactly what you are getting - if it does not include a gold filter, don't assume it comes with one. |
Does this model (Technivorm Thermo Moccamaster CDGT with Thermal Carafe) come with the gold filter? | Yes, mine was shipped from an American distributor who included an independently-branded gold filter. Techni-vorm does not recommend using a gold filter - although they don't explain why. Personally, the paper ones work for me. I don't care for any coffee "grit" in my cup of coffee - although I know plenty of people who prefer using the gold filter. Hope this info helps. |
Does this model (Technivorm Thermo Moccamaster CDGT with Thermal Carafe) come with the gold filter? | Yes it does, but I have never used it. Still loving my coffee maker, by the way. |
Does this model (Technivorm Thermo Moccamaster CDGT with Thermal Carafe) come with the gold filter? | all depends who you buy it from i guess .the most important item it should have is the manual and warranty . technivorm does not send out extras . and then the unit's warranty is in question . which is 5 years . too much money to have any problems . is why i sent back and did get a full refund . roastmasters has a good deal on them . the pricing is about the same no matter where you buy it . but some sellers give more extras when buy from them . filters , cleaning solution , and coffee . plus free shipping , and sometimes no sells tax . worth it to shop around for the best deal. |
How many covers are needed if you want to do laundry every other day? | depends on how much your baby poos. Poo tends to get on the side gussets though not always, whereas pee is ussually okay unless it's a really heavy pee and it's wet the leg holes. For a baby that poos about three to four times a day, I would suggest around 6 minimum. It's glorious having clean covers to use, so depending on your budget up to ten would be great especially if you're washing every other day though not necessary. Hope this helps! |
How many covers are needed if you want to do laundry every other day? | I have 8 covers and one backup if needed. We usually use one cover all day (wiping it clean after each diaper change) but will use a different one if there's a blow-out that gets on the cover! If your prefolds are secured tight enough then most of it will be contained :-) |
How many covers are needed if you want to do laundry every other day? | 5 is more than enough most of the time especially once they're in size 2s & messing less often. |
How many covers are needed if you want to do laundry every other day? | We have four covers and do laundry every other day. This is probably a bare minimum though. Our covers get reused until a messy leak or laundry day. |
How many covers are needed if you want to do laundry every other day? | Generally, I can get by using one or two covers per day --alternating each change so they air out completely. I have 4 covers, but 6 would be ideal and allow for backup if any covers get poo on them and need to be washed. In a pinch, I just let my 18 month old go without a cover (as long as a bm is not in his near future).These covers are just a single layer of fabric, and don't absorb much odor to begin with. |
How many covers are needed if you want to do laundry every other day? | Not many. The wrap can be wiped clean and used repetitively with fresh inserts. If feces are involved, then I'd launder it. Just depends on how many bowel movements your child has per day. |
How many covers are needed if you want to do laundry every other day? | If you are only using covers and prefolds or fitteds I would say between 7 to 10 depending on your little ones age. My daughter is 6 months and in a day we only use covers and fitteds or prefolds I use about 5, drying in between and a few back ups in case of blow outs. I hope that helps. |
How many covers are needed if you want to do laundry every other day? | Bare minimum of 5, but newborn poo is explosive, runny, and frequent, so it is very possible that you could need more. If the elastic or gussets get wet, or if poop gets into the seams, they need to be washed, otherwise they can be wiped and reused. |
The blade i have has CE2 cerrmicedge 1.5mm but doesn't have the AG on it. will this one still work. | It may not wory on the andis clipper there is one other blade that will interchange you can call pet smart they will know |
what hot brush do you recommend for short fine hair that does not burn scalp? | I like this one too. It curls fabulously well. My hair usually curls and then straightens before I ever get to work, but with this one, it gets soooo hot that the curl holds...and you don't need very long hair to go around the barrel. HOwever....it is so hot you will need to set the temp down a little and not use it on hi, AND, like was said before, you CANNOT put it down on your scalp or touch it with your fingers, bc it is soooo hot. |
what hot brush do you recommend for short fine hair that does not burn scalp? | If you can find Conair Instant Heat Hot Brush 1" or smaller I would recommend it. I have the one that's 1 1/4" as Ihave long fine hair (shorter on the top) and I love it...have been using it for years....Good Luck |
what hot brush do you recommend for short fine hair that does not burn scalp? | Depending how short your hair is I really like this one, just don't let it set on your scalp. It really works good on fine straight hair because it get really hot and sets the curl in your hair, that is why I like it so well. This curling iron has different settings from cool to hot. I use the really hot for me because my hair is so hard to curl. Myself I really like this curling iron. I have purchased this one for about 3 times and I will keep getting this one as long as it is available. |
what hot brush do you recommend for short fine hair that does not burn scalp? | This is the only curling iron that actually grabs the hair and curls it. The brushes are heated thus you get a very nice curl. the only thing is you don't want the brushes to get too close to the scalp but after using it for a bit you will learn how to use it. Why not just try it? It's not too expensive. I hated it at first and now I have two of them because it curls my limp thin hair best. |
what hot brush do you recommend for short fine hair that does not burn scalp? | Dorothy I recommend small rollers that grip your fine hair or the smallest barrell hot brush you can find. Hope this helps. |
Can I use the RCA outputs to drive ear buds (with a Y-cable adapter to 3.5mm plug)? | No because there is no power sent through the RCA cables, just signal. You could however possibly use the RCA output on the 2+'s (must be the 2+'s as the normal A2's don't have RCA output) to connect to a headphone amp, then onto your headphones. That output is variable so your volume at the headphone would be affected by the volume on the speaker, hence the speakers would also be on when you're listening to headphones. Not an ideal situation, just wanted to put out the possibility for the connection. I don't find anything in the specs about a 3.5mm "Output" which would be a very nice feature that I'm suprised they haven't added it. |
Do you have this same product but in bright white? | Yes, we have 50W cool white flood light. please refer to : http://www.amazon.com/gp/product/B00DY595CW |
Will a DC 1414T charger charge this battery? | Absolutely yes. That is the exact charger I have been using. Works great, charges fast and full. No problems. |
Will a DC 1414T charger charge this battery? | you run a business and you're asking me whether or not 1414T what charges battery. I need to run your business |
is bottom bracket included?? | I thought it was a weird question until I looked up "Bb68 73" and found this...Shimano XT SM-BB70 Hollowtech II Bottom BracketLooking at the pictures on the left...Now that's weird. |
the size of air condtioner dont know if it will fit no sizes on alot of these units how can 1 tell??/ | The best way to find the dimensions would be to go to the manufacturer's homepage and search for the exact model number of the air conditioner. 3rd party websites, like Amazon, at times provide the incorrect dimensions. |
How tall are these socks? Could they be worn over shin guards for soccer? | My son is 5'2" and they come to the middle of his shin. The large ones, so I don't think so. |
Is the 25x37 25inches wide and 37inches long, or is it 37inches wide and 25 inches long? | The self-warming pads are rectangular. The length is going to be 37 inches and the width would be 25. I have the 20"x25" and the 14"x22" sizes. I'm not sure it really makes a difference as they can be rotated to fit in the space you're looking at. My cat absolutely loves them and they fit in his two-room house perfectly. |
Is the 25x37 25inches wide and 37inches long, or is it 37inches wide and 25 inches long? | No worries we bought one and our Kitty loves it! The humor was spread around Cape Cod. Hope you don't mind but we are all engineers of different varieties. We got a great laugh at the dimension question. Hope your Holidays went well and you kitty enjoys the new pad! Come see us on Cape Cod |
Is the 25x37 25inches wide and 37inches long, or is it 37inches wide and 25 inches long? | string theory in theoretical physics tells us there may be as many as 14 dimensions that we can comprehend. My guess is its 25" x 37" no matter how you bend it or rotate it. Good Luck. |
Is the 25x37 25inches wide and 37inches long, or is it 37inches wide and 25 inches long? | I stand mine up on its side. So mine is 37 inches long, half an inch wide, and 25 inches thick.My pet spaghetti loves it. |
Is the 25x37 25inches wide and 37inches long, or is it 37inches wide and 25 inches long? | it depends..if you put it right side up or down... if it's accidentally put upside down and you rotate it to the left then it's 25 inches long and 37 inches wide... but if you put it right side up and make sure you don't rotate it then it's 25 inches wide and 37 inches long.. but you can put it upside down and rotate twice to the left and it will still be 25 inches wide and 37 inches long... anyways... good luck! |
Is it the wall-plug charger you mention not included in the box? I once bought NTT Docomo Arrow X F-10D with wireless charger included. | The charger doesn't come with the mobile phone. Did you buy NTT Docomo Arrow X F-10D from me? Thanks |
are these shoes slip resistant | yes they are but not in all wet surfaces, like painted concrete floor. otherwise great and comfortable to work for long hours standing. |
How do you filter the water if it does not require a filter?? I want water that is purified after you take from your sink? | I use the water from the kitchen sink but run it in a BRITA PITCHER TO PURIFY AND TASTE. You can add a faucet Brita or PUR TO FILTER FROM THE SINK.I USE 3 GALLON JUGS. YOU may want to look at filtered water jugs from GREENWAY ETC. they filter and then hold a gallon or 2 and u place them in the fridge or on the counter |
How do you filter the water if it does not require a filter?? I want water that is purified after you take from your sink? | This machine uses a large, 5 gallon bottle of purified drinking water. Based on your question, I think that you are looking for something different. |
How do you filter the water if it does not require a filter?? I want water that is purified after you take from your sink? | We get our water bottles from Lowe's. (Primo) It's already filtered. I haven't heard of many people using a system like this for transporting tap water, but if you did that you'd obviously have to install a tap water filtration system at your sink, or purchase a dispenser that includes filtration (usually not the bottle fed variety.) |
How many years will the bulb last based on 12 hours use per day? | It's hard to predict the future, of course, but LEDs are expected to outlast incandescents and fluorescents, so they should last many years, even at 12 hrs per day. Certainly long enough that the technology and prices may be significantly different by then. |
How many years will the bulb last based on 12 hours use per day? | Claims from new and improved technologies often lead us to disappointment. The CFL bulb was supposed to last a long time greater then the incandescent bulb , in my experiences with CFL's so far,they arent lasting any longer then my incandescents. As far as these new LED's I guess time will tell. So far so good with the Eagles ive purchased so far . I suppose it will come down to the amount of vibrations it can handle . These bulbs are too new to prove a shelf life as of yet . |
Can you export content to a computer's hard-drive via the USB port for those TV shows you wish to save and edit the commercials out on a computer? If not, then the Brite-View BV-980H DVR is not much use to me. The reason I'm asking is because they're... | According to product instruction: "It is possible to expand the available storage using an external hard drive. The hard disk must either be formatted with NTFS or FAT 16/32. Connect the hard drive through the USB port, and the DVR will automatically recognize it. To set the DVR to record onto the external hard drive , access the menu. Under REC tab, select REC device and choose USB....." Seems to me you can do what you seek. |
what are the ingredients? | contains all natural washing soda, sodium silicate and coconut oil based detergents. for more information go to www.charliesoap.com |
what are the ingredients? | Ingredients are not stated on the container. Customer Service # is 800-854-3541 Email is charliesoap.comI'ts good stuff. It helps with my smelly washer. |
what are the ingredients? | I don't know. I think that the best place to ask would be the company. I haven't looked on the bucket to see, but I'm pretty sure they are all about being non-toxic. (Obviously, you still wouldn't eat the stuff.) Good luck! |
what are the ingredients? | contains all natural washing soda, sodium silicate and coconut oil based detergents.for more information go to www.charliesoap.com |
Are the legs metal or wood? And if wood what kind? | Wood. Hard wood. Typically the hard woods that they use in Asia. I think the entire is very good quality. The legs fit perfectly to my bedframe. Never had that happen before without drilling more holes. Bolts and washers are included. |
Are the legs metal or wood? And if wood what kind? | Legs are wood. Don't know what kind of wood, but it's stained very dark brown. Seems to be very hard and good quality. |
Are the legs metal or wood? And if wood what kind? | Wood - not sure kind. It doesn't lie tight next to the bed frame so it wobbles if the bed moves at all. Really don't like that. |
Are the legs metal or wood? And if wood what kind? | They are wood of some engineered variety. Very hard so in turn they are very sturdy |
can I attach this to an Oregon pacific table saw? | I'm sure you can if your saw is capable of accepting some of the more common guides on the market. That said, the Vega Pro is not a very good product. |
can I attach this to an Oregon pacific table saw? | Like other responders I am not familiar with that particular table saw. What I can tell you is that the Vega fence is generic in its design and construction and therefore I believe it to be adaptable to many contractor and cabinet saws with normal table size (not bench top saws). I've found that most woodworkers are innovative so......, if you don't mind drilling some holes or supplementing hardware it is a great choice for an aftermarket fence. You tube is a good place to get a look at the fence and installation, and then compare to what you have in hand. |
can I attach this to an Oregon pacific table saw? | Sorry Robert, I can not speak to that. There is a youtube video that shows how to install the fence, and it makes reference to distance between hole on the saw. |
can I attach this to an Oregon pacific table saw? | Robert, I have never come across an Oregon Pacific table saw before. But, if I saw a picture of the front and back edge of the table on the saw I could tell you if the Vega Fence would fit. |
are these just the bottom cushion or do they include the back part also? | Top & bottom in school set, BUT they are exactly the same. There is no difference between them in shape. |
are these just the bottom cushion or do they include the back part also? | These are two identical cushions that work just fine as either bottom or back. We bought 4'sets,for our metal patio chairs and wife just loves them. The cushions were out in the AZ sun all winter and did not fade. We tried to take them in during rain storms, but when we forgot the material,shed the water like a duck. |
Will this work with my M&P 9mm 4.25? | THere is no Image with the question but since I have bought what I think your asking about the Laser light from streamlight... I have a M&P .45 with a 4" barrell and it works just fine...so good luck and hope you like yours!!! |
Do I have to buy an update version every year? | Do I have to buy an update version every year? how much will it be and when I down this do I have to buy anything else. |
quiet cheap oscilating fan: Can anyone recommend a fairly quiet, under 50$, oscillating fan? | Windmere was good for me, but I can't find it now. Honeywell Stand Fans are very loud. |
Does this need to be combined with a beard shampoo to be fully effective? | I didn't combine it with beard shampoo just regular hair shampoo. I found it to be fairly worthless. After a few weeks, my beard got more course and began itching. I've since switched back to regular shampoo and conditioner and find that it works great. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.