query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Would these look ok on a Tan (sand color)shirt? | Yes. I've used these on many different light colored shirts and these will work. |
Would these look ok on a Tan (sand color)shirt? | In all cases, the polymer style transfer paper will show the color of the shirt through and will make the colours in the image skew. If you use dark colours in the image this will be less. These transfer papers are best on white fabric. |
Would these look ok on a Tan (sand color)shirt? | This transfer paper will work on a tan shirt but will lose color ( Black will turn dark grey and colors will not be as bright) it will work best on a white shirt. Have A Great Day! Glen |
Would these look ok on a Tan (sand color)shirt? | Depends on the color ink. The darker, the better. Make sure you are using pigment ink and cut off excess. After that you will have a great product. |
is this electric 110 volts | Yes, but it needs to be on an outlet with at least a 15 amp breaker that has no other high drain appliance using the same breaker. |
Does anyone know where I can get the instructions? Mine are missing and I can't find the website for the manufacturer | I FOUND THE INSTRUCTIONS. I have them in printed form. My scanners are not working, however, I could mail to you. On the cover of the instructions are two websites: www.homesourceind.com and [email protected]. Best of luck! |
Does anyone know where I can get the instructions? Mine are missing and I can't find the website for the manufacturer | Need to get ahold of Home Source Industries. Received an order from them and parts are missing on Tall Oak Microwave Cabinet. |
Does anyone know where I can get the instructions? Mine are missing and I can't find the website for the manufacturer | You definitely need the instructions because it is not easy to build. I wish I had kept mine and I would scan to you. Can Amazon assist you with locating the manufacturer? |
Does anyone know where I can get the instructions? Mine are missing and I can't find the website for the manufacturer | did you ever get the instuctions because mine did not come with instuctions either and I need them. thanks |
How big is the cooking surface? | I am not in front of the grill, but I am sure the dimensions are in the specs. I would say it is about 1/2 the size of a full grill. |
How big is the cooking surface? | I donot know dimensions but certainly big enough for 4 steaks and ears of corn |
How big is the cooking surface? | Hmm, good question.. I don't have a ruler to measure it with and I am about 30 miles from it at the moment... however, it was big enough for a pot holding two lobsters, I have also cooked a rack of ribs on it, a mess of chops, etc... probably not big enough to do all the cooking for a party, but definitely enough to cook for 4-6 folks... my guess the cooking surface is probably 12" x 18" or so...there are also two different sizes to his grille and I think we bought the smaller one... |
Please describe the wood color, light/medium/dark? oak wood grain? Would it be OK in a room with oak bookcases? | Hi! I have bought 5 pieces in this color/stain and I love it! It's about medium with darker accents. I'm not sure if I would mix this exact style of stain with any other because it is unique. It is easy to assemble and great quality though. I hope this helps... |
Please describe the wood color, light/medium/dark? oak wood grain? Would it be OK in a room with oak bookcases? | I'd say it is a medium stain closer to cherry than oak, but I also think all wood goes together. |
Do I need to let the seeds dry out completely before restocking my feeder? | I did not. The seeds went quickly since it seems that my squirrel population has a mutation in the "spicy receptor" they don't seem to care. The product does not work for me, too bad |
Do I need to let the seeds dry out completely before restocking my feeder? | no my husband misses the sauce onto the seeds and places it directly into the feeders we have a large enough for population in our location that they go through it fairly quickly and we have to replace every couple of days anyway we love this product I hope that helps you |
Do I need to let the seeds dry out completely before restocking my feeder? | The product *is* an oily product. However, after mixing with my feed it flowed just as well as "dry" seed. Two caveats: DO make sure to wear disposable gloves and don't stick your face anywhere near the seed bucket while adding or mixing the product into the seed or while refilling your feeders. It takes a LONG time for your eyes to stop burning... trust me. Second, while this stuff is Chernobyl Hot squirrels are a hybrid of implacable, crafty, and stupid. MOST will sample it, spend the next half-hour trying to rub off their faces, and leave it alone. However, I have one or two that just don't give a damn how hot it is and eat it anyway. Thinking about Bhut Jolokia powder.... http://www.amazon.com/Bhut-Jolokia-Ghost-Powder-Very/dp/B004C9PTCE/ref=sr_1_1?ie=UTF8&qid=1394993459&sr=8-1&keywords=bhut+jolokia |
Would it work as well with a 2006 Jeep Liberty? | I was never able to successfully pair it to my jeep. I should have returned it but never did. |
How many lbs would you need to fill a 1 Cubic Foot Fiberglass Resin Tank properly. My use would be for spotless car washing/detailing. | Tough to say without measuring, but judging by the size of the bag I got I would guess around 6 bags. However that sounds like overkill for car washes. This is designed to be the last purification stage after reverse osmosis. It would be prohibitively expensive to use reverse osmosis water for car washes, as you waste 3 times as much water as the reverse osmosis water you make, and using this with regular water would trash this stuff in a heartbeat. I would suggest looking into a fine carbon block filter, such as 0.5 micron. Then you can install it inline on a waterline and maintain your water pressure. It takes like 24 hours to make 50 gallons of reverse osmosis water, not really suitable for car washes in my opinion. |
Is this filter electrostatically charged? | Nope, it's the same as the stock filter, and judging by how filthy our old one was, it does remove some crud from the air in the cabin. btw, nice youtube video on swapping out the filter, which is a bit awkward, but not difficult. |
Does this hook-up to those small portable benzomatic tanks? | yes it does and also comes with a bent wire loop to fasten the tank to your belt, I have my torch duct taped to a short pole and find it handy for burning out spiders on my patio rafters. Hope that helped you. |
Does this hook-up to those small portable benzomatic tanks? | Yes, that is what it is intended to use. This torch can use a mapp style gas or propane. Very good product. The only caution I have found is that if you dial back the gas flow it can overheat the tip/lighting mechanism. This torch is meant to be used in a "full" on heat setting only. |
Does this hook-up to those small portable benzomatic tanks? | Yes, absolutely. Then the tank can hang from your belt or pocket. I love this torch and since purchasing it all of my co-workers have bought them! |
Does this hook-up to those small portable benzomatic tanks? | Yes it does. You can even use the portable propane gas tanks for camping but remember the heat will not be the same as mapp gas. |
Does this hook-up to those small portable benzomatic tanks? | I use these torch heads with generic 14" MAPP gas and propane cylinders of the type you can buy at most hardware stores. I'm not familiar with benzomatic tanks but I would expect that the connections are standard. |
Can you use these in the office or will the open sound bother some? | I'm pretty sure it wont bother others, but it might be a little uncomfortable with the long cable at a work desk. |
Can you use these in the office or will the open sound bother some? | They don't bleed very much at all, which is kinda of a bad thing IMO. They don't really sound open to my ears. Semi-open possibly. You would be able to use them in an office setting pretty well, however these are not good headphones. I can't stress enough how poor the he-300's sound. These are not subjectively enjoyable, they just sound like a faulty design. The Sennheiser hd558 with foam mod walk circles around the he-300's. I suggest starting there. |
Can you use these in the office or will the open sound bother some? | Hi Thomyi, I wouldn't use it if I were you. It is an open back headphone so there will be a lot of sound leak and your colleagues might not be too comfortable with that. Try getting some iem or closed back headphones. |
Can you use these in the office or will the open sound bother some? | Although they don't leak as much as other open headphones, I would personally not use them in an office. |
Can you use these in the office or will the open sound bother some? | They are definitely open headphones and the sound definitely leaks. You will hear the birds chirping outside and your coworkers will hear everything you |
What is the horespower on this? Is it 8? | it is an 11 amp motor. no hp rating is shown on the outside. hp is misleading as there is constant and peak hp. compare the amp pull to other machines. this unit's suction is adequate. with the floor attachment in place, it lifts an area rug off the floor. i use the brushes with the floor attachment to make area rug cleaning easy. all-in-all this a very good, but not perfect, machine. read my review for more info. |
would this work with my panasonic lumix system? | Not this version, the Olympus has its own input plug, but search for Trigmaster Panasonic on Amazon and you will find a version for Lumix. |
would this work with my panasonic lumix system? | The wireless flash system will work with any camera so long as the remote (the one with the antenna) is on the camera hotshoe. Despite the label that this is meant for Olympus cameras, the wireless flash system does not do TTL metering of any kind. They label this as Olympus compatible because it comes with a cable that allows you to connect the camera via the cable to one of the flash triggers, and then use the remote as a wireless shutter trigger. So for a wireless flash system, it will work with any camera brand because it does not support any kind of TTL metering. It will work so long as the camera has a hotshoe. This will work as a wireless shutter trigger primarily for Olympus cameras because it comes with a cable for Olympus cameras. I guess it will also work as a wireless trigger for other cameras if you have the proper cable for those camera manufacturers. Source: Personal Use. I've been using this Olympus compatible set since June 2013. |
What type of bulb is used? Is it halogen or LED, or something else? | Halogen and LED are new inventions. :) It's a traditional incandescent from what I can tell. The bulb gets pretty toasty when it is on full blast. |
Can someone clarify: When the coffee has brewed, does it make beeps, how many of them, and how loud? (Hate those beeps!) | The beeps are not loud or annoying. I think that there are five beeps... after each brew cycle. HINT: I make ten cups each time I brew. Then, I have hot coffee on day one, warm coffee on day two and cool coffee on day 3. One clean-up; that's it!. I microwave to heat up on days 2 and 3. If you add cream after day one to the carafe, then refrigerate after adding the creamer. |
Can someone clarify: When the coffee has brewed, does it make beeps, how many of them, and how loud? (Hate those beeps!) | I think it does 3 beeps, but they are to low, most of the time I miss them. |
Can someone clarify: When the coffee has brewed, does it make beeps, how many of them, and how loud? (Hate those beeps!) | It makes four or five distinctive rapid (but not loud) beeps. Just loud enough to hear. Not loud at all. |
Can someone clarify: When the coffee has brewed, does it make beeps, how many of them, and how loud? (Hate those beeps!) | It beeps when the coffee is finished brewing. It is not very loud and it is quick, in my opinion. I find it very helpful knowing that the coffee is ready. |
Will this memory work with my ASUS MAXIMUS VII FORMULA motherboard? | i got this for my asrock z97 extreme9 mobo and its flawless, i love this ram if your willing to spend the moneh :D |
Will this memory work with my ASUS MAXIMUS VII FORMULA motherboard? | David, The best thing is to go to ASUS website and look at the motherboard specs. |
Will the DVD play mini disks from my camcorder? | No I don't think so. The DVD player is self loading so it is built to handle regular sized disks.I think if it pulled one to small inside it would become stuck. |
Do the dimensions listed include the ties? Or are the dimensions strictly relate to the main body of the apron? | I can't say positively but the ties weren't in the dimensions. At least I don't remember that they were. Since I bought them for my 6 or 7 grandchildren I had several sizes and the ties were just fine. Hope this helps. |
How does the 2.8x magnification work? I'm afraid that when this screen viewfinder is used, it will crop the lcd screen severly. is this right? | No, it works very well!! I have canon t3i so my LCD screen folds out. So I got the carryspeed attachment so I wouldn't have to glue the metal frame to my camera. But I love how this thing works! |
How does the 2.8x magnification work? I'm afraid that when this screen viewfinder is used, it will crop the lcd screen severly. is this right? | The image is simply magnified when viewed through the loupe. There's no settings to choose from. This helps when the light is too bright (think sunny days at the beach or in the snow, but really anytime there's too much light this helps tremendously) and when you quickly want to see whether the subject was captured in focus or not, because it's shown that much bigger. The eye cup also helps by darkening the area around the eye. I usually just hang it from my neck and use it a lot. It's a great product and this one works very well. I haven't glued the magnetic strip to the camera because I'd rather not do that and because I only use the loupe when I need it. The image is simply magnified when viewed through the loupe. There's no settings to choose from. This helps when the light is too bright (think sunny days at the beach or in the snow, but really anytime there's too much light this helps tremendously) and when you quickly want to see whether the subject was captured in focus or not, because it's shown that much bigger. The eye cup also helps by darkening the area around the eye. I usually just hang it from my neck and use it a lot. It's a great product and this one works very well. I haven't glued the magnetic strip to the camera because I'd... » Read More The image is simply magnified when viewed through the loupe. There's no settings to choose from. This helps when the light is too bright (think sunny days at the beach or in the snow, but really anytime there's too much light this helps tremendously) and when you quickly want to see whether the subject was captured in focus or not, because it's shown that much bigger. The eye cup also helps by darkening the area around the eye. I usually just hang it from my neck and use it a lot. It's a great product and this one works very well. I haven't glued the magnetic strip to the camera because I'd rather not do that and because I only use the loupe when I need it. « Show Less |
Silly question but how exactly is this installed, I keep reading this needs to be installed in the ground via digging a trench.. .Does one then put this INSIDE the narrow trench then put soil back over the sides? How does one stake it? I don't see... | Hi there! Yes, you simply dig a small trench, place the edging in the trench, then replace the dirt to desired height. Stakes are not needed for this product. Pieces are easily connected together if your area exceeds the length of each roll. I recommend rolling out the rolls when you receive them and placing something heavy on each end. Leave them for a day or so before installing. This makes installation MUCH easier, as you don't have to deal with the curl resistance! This product looks very nice and is far less flimsy than many of the others on the market. :) Happy gardening! |
What is the dimension of this sink? | Diameter 16 1/4 inch Height from counter is 5 3/4 inch Caution: Even though I contacted Kohler prior to purchase, they assured me that the drain that came with the unit is the correct one, the drain I received did not work with the overflow. I think I needed the "other" type of drain with overflow built-in. |
Could I use this on a 3 door Hyundai accent? | Dear Linsey, good day to you. To answer your question I don't see any problem. This roof rack system is great, I use it all the time simple to use. The bags are very sturdy and the best part is that they are portable. if you buy them and are not sure how to use them I'd be more than happy to lend my advice 😁[email protected] |
What does the description mean by "A piece BX1500LCD"? Why the "A Piece"? Is this the right one for BX1500LCD? | The replacement battery is actually a pair with a jumper, fits the case exactly. What APC backup are you replacing batteries in? |
What does the description mean by "A piece BX1500LCD"? Why the "A Piece"? Is this the right one for BX1500LCD? | It is a battery assembly for the BX1500LCD. It consist of two 6Volt sealed lead acid batteries connected in series with a jumper wire. The batteries are held together with some sort double sided tape. Pay attention when you remove the old batteries. I had a few beers and could not figure out how the replacement pack fit into the UPS until the next morning :-) |
Does anybody know the differences between the Whirlibird II and the Whirlibird III? Is there one you would recommend over the other? Thanks! | In comparing the descriptions of the two versions of the jacket at Columbia's website, the differences I'm finding are: Whirlibird iii Construction: Zip-in and 3-point Interchange System Drawcord adjustable hem Adjustable cuff tabs Modern classic fit Fabric: Shell lining 100% nylon embossed taffeta Inner jacket exterior 100% polyester Microtex Lite II taffeta Inner jacket lining 100% polyester Thermal Reflective Microtex Omni-Heat inner jacket insulation 50% polyester/50% recycled polyester, 80g OH --------- Whirlibird ii Construction: Zip-in Interchange System Fabric: OMNI-TECH SHELL DETAILS 100% nylon SHELL LINING 100% nylon taffeta INNER JACKET EXTERIOR 100% polyester INNER JACKET LINING 100% polyester Thermal Reflective Other differences in the version III: Available colors Available color patterns Columbia only offers the newer version on their website So, there are some differences but not a lot. Hope this helps. |
Are there any animal products used in this cream? | There are no animal products used in this cream. The ingredients in the cream are 100% plant based. |
How do you put the finger tabs on the child's hand? Which way do they go? I've looked for video's with no luck on this style. Any help please :) | put your middle finger through the hole.....the index finger goes on the narrow portion and the middle and third fingers rest on the fatter portion.......then put the tab on the string, holding it in place with the fingers...hope that helps :) |
does this work for the i pad 4? | As for the Bluetooth connect-ability, it will work; However, the stand function is not built to work with the iPad 4. |
does this work for the i pad 4? | Yes it will work through bluetooth or if you have a stereo/headphone minijack |
Does elastic go all the way around the fitted sheet? | I believe it does. Unfortunately the sheets were bought for our condo and I won't be back there until September. I checked with my husband and he was pretty sure they did. |
Does elastic go all the way around the fitted sheet? | Yup! But I have to warn you, it's not a super snug fit on the mattress. I actually like this b/c it makes changing the sheets easier but thought you should know. |
Will That sticky Gel, destroy my dash? If I try to pull it off in the future? | To be honest, I am not sure. Ever since we attached it to the dash, we have not tried to remove yet. This much I can say....the cushion that is directly holding the phone is not of good quality. We have had to replace it already. I hope this helps. |
I can't believe how difficult it is to identify what size filters go with this product. Someone please tell me. Model #'s please. | I buy the No.4 cone coffee filters - they are slightly too tall so I just fold them over (along the seam) at the bottom. Works like a charm. I do not buy the band name, generic are just fine. |
I reed a replacement handset for a CL84350. Will one of these handset's work | Don't know. I replaced the entire corded/cordless system because it was cheaper than replacing ALL of the batteries from the old system. |
does it come with a mattress pad? | Yes it seemed a bit thin but it worked out great and the baby slept great on it |
I bought this rack but I feel it's too heavy and overkill for transporting the bikes. Why did you pick this instead of class2 version? | Same reason as Stanley C.-so we could utilize it in ways other than just towing bikes. We've liked it a lot so far, it wasn't hard to install, and was much cheaper than going the route that so many others went (having it installed at a uhaul location). |
I bought this rack but I feel it's too heavy and overkill for transporting the bikes. Why did you pick this instead of class2 version? | We bought this specifically to haul a trailer. It just happens to work well with a bike rack even though that was not the intended use for our purchase. |
I bought this rack but I feel it's too heavy and overkill for transporting the bikes. Why did you pick this instead of class2 version? | It was for my in laws van. They are hauling 4 bikes, so just for safety I thought the heavier version for a little extra $ was a better fit. Plus they had mentioned putting a splitter in the received and hauling the bike time out of the top and a platform for coolers on the bottom. |
I bought this rack but I feel it's too heavy and overkill for transporting the bikes. Why did you pick this instead of class2 version? | Oh. Bigger is better in terms of feeling comfortable that you can load up a bike rack and have no worries. Used a Thule 5 bike rack and was glad I did. Nice and strong and still have the ability to install a tow ball to pull a trailer with ATVs. |
I bought this rack but I feel it's too heavy and overkill for transporting the bikes. Why did you pick this instead of class2 version? | I actually don't think it's that heavy. Quite frankly i just chose this because of the feedback and the price. I carry three bikes and it dies seems very stable. Was just a bit difficult for one person to install. So if you haven't installed it yet, i recommend just going to your local gas station and have them do it for $20. Sorry can't be of much help. |
I bought this rack but I feel it's too heavy and overkill for transporting the bikes. Why did you pick this instead of class2 version? | Its not that heavy. With hitches, it is always better to have more than you need. For the price delta, this is the better purchase. You never know when you might want to pull a U-haul or load up one of those basket carry attachments to haul gear outside of the van for camping or something. But if it isn't what you want, buy the cheaper one. |
I bought this rack but I feel it's too heavy and overkill for transporting the bikes. Why did you pick this instead of class2 version? | I completely agree it is major overkill and if I had it to do over I would have gotten a lighter duty hitch. |
I bought this rack but I feel it's too heavy and overkill for transporting the bikes. Why did you pick this instead of class2 version? | It has a 2 inch receiver. All my current tow balls, bike racks, and cooler platforms utilize 2 inch stock. I also use this hitch receiver as a recovery/towing/winching point. I wanted the strongest available bar assembly with the greatest weight rating. It may be over kill for a bike rack , but I now a have a very convenient way to tow my Van out of mud or snow with out crawling under the Van to look for an attachment point. |
Just received crockpot. The inside of the stoneware has a "bubble" on the bottom, is that okay? | NOBy the way, the crockpot is great . . . without bubbles, and cooks marvelously! |
Just received crockpot. The inside of the stoneware has a "bubble" on the bottom, is that okay? | Please call us at 1-800-323-9519. We are open Monday through Saturday, 8:00 AM through 8:00 PM Eastern. |
Just received crockpot. The inside of the stoneware has a "bubble" on the bottom, is that okay? | Mine had bubbles on the bottom also and I notified Amazon and they sent me a replacement and a pre-paid label to return the bad one. Second one is fine. |
does this fit 2002 bmw 325i??? | Depends where you you wanna use em for? And if the bulbs you taken out are 194 then yes they will fit |
Actually I would like the set that is in the picture. I fell in love with this. Is there anyway to get the pillows and the shams? | I did not get the pillows and shams so I do not know the answer to the question. Sorry |
Actually I would like the set that is in the picture. I fell in love with this. Is there anyway to get the pillows and the shams? | We didn't get the pillows and shams. I would imagine if you searched the Modern Heirloom Collection on the internet you could find what you are looking for. |
Are these the or hers that can be used to make designs with on top of the coffee or hot chocolate? | If I understand your question correctly, those designs are a result of the pouring technique and yes, they can be done with these pitchers. |
Are these the or hers that can be used to make designs with on top of the coffee or hot chocolate? | Yes this type if the ones used for making art. Here is a video that you can see https://www.youtube.com/watch?v=NItrlTwbvAU |
Are these the or hers that can be used to make designs with on top of the coffee or hot chocolate? | These are the stainless steel frothing pitchers to steam the milk that you put in your espresso. Make your design after you put the steamed milk and foam/froth in your cup. Don't put too much foam/froth on top of your espresso or you will not be able to make a design. Have fun with it and enjoy! |
Does it come with the tripod and insets in the picture? | Yes, all items int he picture are included, and all are made of stainless steel. |
Does it come with the tripod and insets in the picture? | Yes. Ours included them. We have not used them, however. With the delayed onset of spring in MN, our cooking emphasis has finally moved outside to our grills. We will use the Fissler occasionally in the summer, but much more so in the fall. |
Does this case work for a T-Mobile Prism ll 2 ? | no this case did not fit my phone at all, the model# for my phone is U8686, the serial # is P7U2891351633563, hope this helps you. |
Does File Center work on Windows 8 and 8.1.? | Yes it works with Windows 8 and 8.1. It's a great program. I use it to scan and organize my life in the cloud. |
Is it 18 1/4" Between the legs...so legs are on the outside of the dimensions or is it 18 1/4" to the outside of the legs | the legs are about 18-1/4" clear space between them, each leg is about 1" thick each, making it about 20-1/4 wide at outside |
Is it 18 1/4" Between the legs...so legs are on the outside of the dimensions or is it 18 1/4" to the outside of the legs | My table is 20 and a half inches wide an 15 and a half long and the legs are on the inside of the table. It's ok for a cup of coffee and a sandwich but sagged with my laptop computer at the cup holder. |
Is it 18 1/4" Between the legs...so legs are on the outside of the dimensions or is it 18 1/4" to the outside of the legs | I hope I can explain this so it makes sense to you. If you measure between the two legs, above extended legs, there's 18 1/4" between the two. If you measure between the legs that slip over the inserts, they're only 18". I hope that helps. |
Will the Surface Pro 3 with the keyboard fit in this case? | Surface Pro 3 dimensions (11,5" x 7,93" x 0,36"), will fit good to this case |
Can this be used in the mountains to run a CPAP machine at night | This has to be attached to a battery source (like a car battery). It would depend on how many watts is required to run the CPAP machine. I can't imagine it would be greater than this, but you would have to check what is the minimum wattage to run the machine. This is an 800Watt. There are 1000 Watt and 1200 Watt ones as well. |
Battery Charging Does the battery automatically charge when you plug it in to the computer via USB or do I have to buy the charger seperate. | automatically charges when you plug it into your computer, although if you feel the need to have more than 5hrs of recording time, a second battery and a travel charger would be recommended. a must get is the 16gb micro sdhc card tho. should hold about 6-7 hours of 720p video. |
Battery Charging Does the battery automatically charge when you plug it in to the computer via USB or do I have to buy the charger seperate. | how much do you think the battery lasts when shooting at 720 fps?Is an 8gb card enough to record with a fully charged battery?The thing is that I don´t want to spend the extra money if I don´t have to. |
Battery Charging Does the battery automatically charge when you plug it in to the computer via USB or do I have to buy the charger seperate. | I got the camera and plugged it into the wall using the charger and hours later have no charge at all on the device. did i do something wrong? Is the battery dead? It beeps 3 times and then nothing. |
Does it play from a USB 3 drive ? | It does have a USB port for playing media from a USB drive, but both units died before I got to try it. |
Could I get a list of ingredients? Thanks. | Organic Pumpkin seeds:Nutritional Profile per serving:Serving size 2 TBLS (15 gms)Calories 52, Total Fat 1.08g, Saturated fat .16gmg, Potassium, Carbohydrates 1.43g, Insoluble fiber 1.34g , Protein 10.6g, Sodium 1.49mg, Potassium 124mg, Zinc 2.34mg, Iron 3.01mg, Magnesium 164mg, Phosphorus 348mg |
Could I get a list of ingredients? Thanks. | Organic Pumpkin seeds: Nutritional Profile per serving: Serving size 2 TBLS (15 gms) Calories 52, Total Fat 1.08g, Saturated fat .16gmg, Potassium, Carbohydrates 1.43g, Insoluble fiber 1.34g , Protein 10.6g, Sodium 1.49mg, Potassium 124mg, Zinc 2.34mg, Iron 3.01mg, Magnesium 164mg, Phosphorus 348mg |
What is the distance that they will illuminate? Is there a flood and a spot light set on this light? | Outer two sections are flood. Inner section is spot. Gives a good throw of light to about 50 feet in front. Not good for distance lighting at all. |
What is the distance that they will illuminate? Is there a flood and a spot light set on this light? | I installed this on my Honda Foreman. I am very happy with this LED. It's really just a flood and it will illuminate a good 100 yards. For the price you can't beat beat it. |
What is the distance that they will illuminate? Is there a flood and a spot light set on this light? | The distance depends on ambient light. You get 150-200 feet. It's ok. I'd pass and get something else. I've had mine for about a year. It's ok, and good for the price, I wish it were a more focused beam and less flood. All led naturally provide flood aLight sound the beam |
What is the distance that they will illuminate? Is there a flood and a spot light set on this light? | I'm not great at judging distance but it illuminates really well for a quad at night. Just one setting for the light. Very happy with it! |
Made a mistake in my order, my camera is canon and bought Sigma EM-140 DG Macro Ring Flash for nikon, will exist a problem with this? | yes, this flash is not fully compatible with your camera.I recommend change you order. |
Made a mistake in my order, my camera is canon and bought Sigma EM-140 DG Macro Ring Flash for nikon, will exist a problem with this? | Yes you will have a problem. You need the correct model of flash. The connections to the cameras are different |
Does it have different adapters inside the package? I can't see other adapters on the pictures above. | I think it has a 2 piece type of clip. Some cars use both pieces while others use one. I just know it doesn't fit a 2012 jetta |
Does it have different adapters inside the package? I can't see other adapters on the pictures above. | No there were no additional adapters. On my 2012 Chevy Equinox which has a straight arm the wiper worked perfectly. If you're not sure check the Bosch Wiper web site to see if it will work on your vehicle. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.