query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Any input on fat loss results with this? Stats appreciated. | Yes, weight loss can result with this product when used in combination with L-tryosine and caffeine. I took 3 capsules with 1 of each of the others just prior to a brisk 4 mile walk. I lost about 10 - 15 pounds during the summer when I was able to exercise every day. Diet will also play a big part in your weight loss. I would finish my morning routine with a whey protein, banana, blueberry smoothie. Keeping the weight off during the winter is still an issue for me as I exercise less and do not use the "cocktail". You'll need to find the dosage appropriate for your body as it can cause the jitters. Hope this helps. Yes, weight loss can result with this product when used in combination with L-tryosine and caffeine. I took 3 capsules with 1 of each of the others just prior to a brisk 4 mile walk. I lost about 10 - 15 pounds during the summer when I was able to exercise every day. Diet will also play a big part in your weight loss. I would finish my morning routine with a whey protein, banana, blueberry smoothie. Keeping the weight off during the winter is still an issue for me as I exercise less and do not use the "cocktail". You'll need to find the dosage appropriate for your body as it can... » Read More Yes, weight loss can result with this product when used in combination with L-tryosine and caffeine. I took 3 capsules with 1 of each of the others just prior to a brisk 4 mile walk. I lost about 10 - 15 pounds during the summer when I was able to exercise every day. Diet will also play a big part in your weight loss. I would finish my morning routine with a whey protein, banana, blueberry smoothie. Keeping the weight off during the winter is still an issue for me as I exercise less and do not use the "cocktail". You'll need to find the dosage appropriate for your body as it can cause the jitters. Hope this helps. « Show Less |
How do you change heads? | Never tried to change because it's motor was so weak I couldn't even rest it on my foot without pressure & it would stop spinning. |
I have a narrow foot. Will this product fit in my shoes? | I have a narrow foot as well and the insole fits in all of my shoes, even boots with a rather pointed toe. Good luck I hope it works out for you. |
I have a narrow foot. Will this product fit in my shoes? | I really don't know I think is easier calling customer service. When I decided to buy this I had no one to answer my questions, so I just went for it. They worked for me great. I think they are somehow standard size. |
can i buy a piece of progray 71x135 | Hello and thank you for your interest in Carl's Place! We can accommodate custom sizes and would be more than happy to provide a quote if you give us a call at 608.352.0002. |
does the music tray tilt toward you & fold up against the post/rod? | Yes, the tray rotates from vertical to horizontal. It stops only when it hits the support post. Hope that helps! |
does the music tray tilt toward you & fold up against the post/rod? | It can; or you can totally remove it. It seems to have a very steady gripping knob. you can also slide the music tray off for carrying. |
does the music tray tilt toward you & fold up against the post/rod? | the music does tily towards you. it doesn't fold but it can be pushed against the post. the rod comes apart in the middle and the feet fold up. hope all of this helps :) |
Is there a conversion kit to allow this mini crib to be used as a toddler bed? | Yes. You can order the rails on Amazon to make into twin bed. I love these cribs. My twins are 15 months and still fit nicely in them. |
Is there a conversion kit to allow this mini crib to be used as a toddler bed? | Toddler bed with the 3/4 rail conversion attachment? No. Toddler bed i.e. twin bed with head and foot board? Yes. This mini crib goes from a crib with four adjustable heights, to a twin sized big girl or boy bed. There are no conversion sets for the 3/4 rail length that would go on one of the two longer sides. Only the full sized crib goes from crib to toddler bed to full size big girl or boy bed with head and foot board. It is still a great bed. My large almost 2 year old daughter still fits, barley, but won't be able to use this until she has graduated to a bed. |
can the rubber foot pads be removed & what is the measurement of the base if so? thank you in advance. | The base is 20" square and the pole measures 18" high from the ground. Not sure if foot pads are removable or not. |
Will this work on a 1994 Acura Legend for the door and rear panel speakers? If so are they required for both front and back? | I am not positive that these will fit the 94 Acura legend, The best part about this is there is no splicing of wires. It literally took mefour minutes to wire my rear deck aftermarket speakers on my 2010 accord |
Will these work to dampen sound from noisy neighbors??? | Doubtful I used 6 packs of them in an office to dampen noise in 1 cubicle and they did very little on ambient noise. |
Will these work to dampen sound from noisy neighbors??? | I don't belive so. We used them to make a confrence room have less echo. They worked for that, but are just foam. |
Other colors besides red available? | Yes... White, orange, green, and black.... These are the colors I have seen.. There could be more |
is the whole pot, including cover, made in USA? | I bought the 12 quart stock pot; and to my knowledge it is made in the USA. |
is the whole pot, including cover, made in USA? | Afraid not. There is a detailed explanation at the All Clad website (link below), but short version is, they make the pots in US but do outsource simpler stuff like the lids:http://www.all-clad.com/Pages/Customer%20Service/faqs.aspxThat said, I have no issues with the quality. |
is the whole pot, including cover, made in USA? | Afraid not. There is a detailed explanation at the All Clad website (link below), but short version is, they make the pots in US but do outsource simpler stuff like the lids: http://www.all-clad.com/Pages/Customer%20Service/faqs.aspx That said, I have no issues with the quality. |
What's the black edition mean from just a regular in this kind of processor?? | That it is unlocked so you can easy overclock it (make it have a higher speed than what is advertised) |
What's the black edition mean from just a regular in this kind of processor?? | Black editions of a CPU are meant for the people who will overclock, they are much easier to overclock when compared to th normal ones, they usually don't come with a fan though. So if you don't want to overclock go with this CPU, but if you know you will overclock then get a black edition one, and pick up an aftermarket heatsink and fan. |
Will it fit on an aeodyne exercise bike? | Hello, sorry for the late reply. I am not familiar with exerciser bikes, however, some customer have order this same seat for theirs from us in the past. I'm thinking that as long as it has the seat post as a regular bike, there should be a way to properly mount it. Thank you. |
Will it fit on an aeodyne exercise bike? | Sorry for late & lame answer. I put it on an adult Schwin tricycle. I'm not clear how an aeodyne frame is built. It would fit on most two wheeled bikes. The rider of the bicycle uses the backrest when the bike is stopped, not as he is riding. He finds it very comfortable for an 88 year old boy. |
Raymond Rasch ll - I have 2 of these cards & the Pentax K5s every other time I use the camera - it says the card is not formatted?? Lost many pics!! | Make sure you have the latest firmware for your camera and check to make sure it can handle a 64gb card. |
Raymond Rasch ll - I have 2 of these cards & the Pentax K5s every other time I use the camera - it says the card is not formatted?? Lost many pics!! | that's scary, I use it for pictures, so far so good. I'm sure you got a lemon unfortunately... |
Will the IR blaster functionality of the phone be available for use with the Diztronic Matte Back Black Flexible TPU Case on? | yes, we made a cutout for the power button so the IR blaster feature will still work |
i cant figure out how to disassemble it so I can put my numbers in. do i remove the 4 corner double stick tape?. help please | I was never able to get it open. So I returned it and bought an Emerson item instead. That was a lot easier to put together and seems to work ok. |
i cant figure out how to disassemble it so I can put my numbers in. do i remove the 4 corner double stick tape?. help please | The stickers are for attaching the unit to your house exterior if you dont plan to screw it down. You have to apply a moderate force to the backing plate in order to separate the front plate from the back plate. |
Does the OBi202 work with Magic Jack? | As I understand, Magic Jack and Obi202 are two kinds of VOIP telephone service boxes. If you have one you don't need the other. I bought the Magic Jack but returned it un-opened when a friend recommended the OBi. I'm glad I did. |
Does the OBi202 work with Magic Jack? | I think the Obi202 would take the place of a Magic Jack. The Obi202 connects directly to your internet modem and you connect your phone(s) to the Obi202. |
Does the OBi202 work with Magic Jack? | My OBi202 with Google voice replaced my Magic jack it works so much better. |
What are the computer's specs? | amd e1 1500 dual core.6gb memory,500gb hard drive,dvd/cd reader/writer, can use dual layer dvd's ;amd radeon hd 7310 graphics; gigabit ethernet; six usb ports 2 front 4 back; hdmi and vga ports for video; digitial media reader; win 8(64 bit os) relaese 8.0,bios..p11-b2;pre installedsoftware os,norton internet security(gateway edition), nero back-it-up. 4 in wide, 10.5 in high, 15 in long. not a gateway fan but i was suprised at this system. got it for my wife and play with win 8. very happy with this |
Your listing say the made from Hemp/Organic cotton, but other sites as well as prana's site says they are mostly nylon, which fabric are these? | They are most likely a bit of both. Nylon helps them wick moisture. They are outdoorsy and quite comfortable. Hope this helps. |
Is it safe???? Has anyone else heard or read anything like this? | I'll repeat my review of this product here: Lo-Salt is hardly a panacea and anyone considering it should consult with their physician FIRST to determine if this product is suitable. Lo-Salt, in fact, could make matters much worse for people on a salt restricted diet! Now here is what the Cleveland Clinic says about this type of product (Mayo and Cleveland are generally considered the top two health organizations in the USA): "Salt substitutes are NOT a healthful option for EVERYONE. Many salt substitutes contain potassium chloride in place of sodium chloride. Potassium consumed in excess may be harmful for some people ... a salt substitute containing potassium chloride is an acceptable alternative in moderation, if you do NOT HAVE kidney problems and have checked with your physician to be sure it will not interact with any of your medications" Additional research found statements like this: "salt substitutes are low-sodium alternatives designed to taste similar. They usually contain mostly potassium chloride, whose toxicity is approximately equal to that of table salt in a healthy person ....However, various diseases and medications may decrease the body's excretion of potassium, thereby increasing the risk of potentially FATAL hyperkalemia. People with kidney failure, heart failure or diabetes should NOT use salt substitutes without medical advice. A manufacturer, Lo Salt, has issued an advisory statement" Note the reference to kidney problems, diabetes and heart failure - the three groups of people most likely to be in need of reducing their salt intake. The likelihood that it will interact with typical blood pressure medications is also fairly high. The remarks about this product interacting with medications should NOT be ignored. I don't recommend this product nor would I advise against using it. It clearly takes a physician or other health care professional to decide whether this is a suitable alternative to regular table salt on an individual basis. |
does it have constant incline, or is it zero incline | I don't think you can get it flat like a treadmill - there are manual dials on both sides that you adjust to a min up to a max incline (like shocks on a car). I have mine at min right now and there is still an incline that I would guess is similar to walking up stairs.... |
does it have constant incline, or is it zero incline | The TC's treadles go up down with your steps, so yes it is a constant incline. It is very low impact. I am 63 have always had shin splints. I just got done, no pain. TC is major investment but worth it. My wife also uses it. |
can you plug these into your iphone 4s? | You can but they have to powered by USB. I plug mine into an iPhone charger for power while I play from my iPad |
How do these compare to Superfeet Black for flat feet? | I don't know, I have only had custom orthotics that were really expensive, and then I tried the Powerstep Pinacle inserts and have been very happy with them. This way I could buy multiple pairs and put them in the shoes that I wear frequently without having to keep changing them from shoe to shoe. I find them just as good as the custom ones. |
Is the diameter at the top of the cavity the same as the bottom diameter? | Yes it is, it is not like the Tovolo molds that have a slight angle and then are beveled at the bottom, these are perfect cubes. |
will work in Venezuela? what comes in the box with the phone? | Si trabaja en venezuela para las 3 operadoras! El mio vino con cargador y manos libres! Excelente tlf ya tengo un año con el y esta igualito! Si quieres deja tu pin si tienes |
will work in Venezuela? what comes in the box with the phone? | Yes, using movistar it works 3G, comes the charger (USB cable) and the manual, It's a very good phone i've had 2 of them. |
will work in Venezuela? what comes in the box with the phone? | As long as you can use the micro sim card from your service provider and the bandwidth matches. Check the technical data from your provider before purchasing. |
will work in Venezuela? what comes in the box with the phone? | Mine contained the charger, USB cable, headphones, and manual together with phone. I don't recall having a screen protector, though. I purchased the screen protector, micro SD card, and protective casing separately. |
will work in Venezuela? what comes in the box with the phone? | Yes, my phone works perfectly, 4G, this came with headphones, charger, cable, screen protector and manual |
will work in Venezuela? what comes in the box with the phone? | Works with any operator in Venezuela. Comes charger, a headset, a screen saver and manuals.Trabaja en venezuela con cualquier operadora. Viene el cargador, unos auriculares, un protector de pantalla y sus manuales. |
Do you have 7-00, I did not see in the listing where you indicate which color you are interested in? | Are you interested in Igora 7-00 ? Your picture shows a different product . If it is Igora permanent color in a red box, the answer is yes we can get it for you. |
How difficult is it to move this machine from room to room and how difficult is it to switch from bike to elliptical mode? | We have moved ours from garage to spare bedroom and back several times. The wheels on the front end may not be too useful depending on the surface. Placing furniture moving pads under the "legs" may make moving easier (sliding) especially if on a continuously carpeted floor. Changing the foot pads from recumbent to elliptical is easy although they may be stiff, as noted by others. The control center must also be repositioned but that only involves loosing or tightening one T-handled bolt. |
How difficult is it to move this machine from room to room and how difficult is it to switch from bike to elliptical mode? | It is very easy to switch between elliptical and bike mode. I never have an issue with that. Personally, I would not move the machine around to much, however if you must then it is not to difficult to do. |
How difficult is it to move this machine from room to room and how difficult is it to switch from bike to elliptical mode? | It is pretty heavy, I cannot move it but my husband can. I am recovering from open heart surgery, so I haveen't been using it as an elliptical mode. It is a good sturdy machine. |
How difficult is it to move this machine from room to room and how difficult is it to switch from bike to elliptical mode? | It would be quite hard to move it from room to room....it is quite large and you no doubt would have to take some of it apart. It is not difficult at all to switch from bike to elliptical mode however. |
We have an elderly cat and need to cover the WHOLE bed. If I bought the California King size, would it cover a full size bed, over the bedding? | Ir should be okay if the covers aren't too thick...it will probably be pretty tight. |
We have an elderly cat and need to cover the WHOLE bed. If I bought the California King size, would it cover a full size bed, over the bedding? | I would guess that it would because they are oversized to begin with. If not, the return policy is great. Good Luck! |
will this part fit the cpb-300 cuisinart blender? and, is it easy to install? | I have cb-1400pc model. Fitted mine just fine. Not sure about your model. And Yes it is easy to install. |
will this part fit the cpb-300 cuisinart blender? and, is it easy to install? | This part may not fit the cpb-300 since it is not one of the models listed under the product description ... but I cannot say for sure.My blender was one of the ones listed ... and having read the review I learned that the part LOOSENS WHEN TURNED CLOCKWISE AND TIGHTENS WHEN TURNED COUNTER-CLOCKWISE and having watched the YouTube video ("How to replace a cuisinart blender coupling SPB7-20TXN") it was not difficult to replace this part on my particular blender.I did a search looking for a clutch that listed your cpb-300 as a compatible blender but had no luck in finding one ... sorry. This part may not fit the cpb-300 since it is not one of the models listed under the product description ... but I cannot say for sure.My blender was one of the ones listed ... and having read the review I learned that the part LOOSENS WHEN TURNED CLOCKWISE AND TIGHTENS WHEN TURNED COUNTER-CLOCKWISE and having watched the YouTube video ("How to replace a cuisinart blender coupling SPB7-20TXN") it was not difficult to replace this part on my particular blender.I did a search looking for a clutch that listed your cpb-300 as a compatible blender but had no... » Read More This part may not fit the cpb-300 since it is not one of the models listed under the product description ... but I cannot say for sure.My blender was one of the ones listed ... and having read the review I learned that the part LOOSENS WHEN TURNED CLOCKWISE AND TIGHTENS WHEN TURNED COUNTER-CLOCKWISE and having watched the YouTube video ("How to replace a cuisinart blender coupling SPB7-20TXN") it was not difficult to replace this part on my particular blender.I did a search looking for a clutch that listed your cpb-300 as a compatible blender but had no luck in finding one ... sorry. « Show Less |
Can I use this to measure 50 AMP post at a campground for amps, volts and polarity? | the meter will measure only a point in time and at that measurement everything may be fine. Problem is an hour later the voltage may have degraded due to all the other campers loading down the system. You could leave the meter connected continuously but then you would have to be looking at it all the time for a voltage drop - some so fast you may miss. You could purchase a line voltage monitor with an adjustable trip point / alarm. So if the normal voltage is 120 volts and your alarm trip point is say 110 then you would get an auidable alarm so you could shut down any devices that could be damaged by low voltage. This type of monitor would be a better investment than the meter since it monitors the line voltage 24X7. Something like this would be a better idea in my opinion - Technology Research AECM20020 Digital Monitor - I did a quick amazon search on Line voltage Monitor Alarm |
Can I use this to measure 50 AMP post at a campground for amps, volts and polarity? | To measure current that high you would need a clamp ammeter or I would recommend the fluke i200 clamp that works with this meter. Remember that if it's AC then there is no polarity. I am assuming that your campground is supplying 120 or 220VAC |
Has anyone had any trouble with these Sun 1000 watt inverters tripping the GFCI outlet in the house circuit when you connect it? | Yes, I sent it back. Their equipment is not in conformance with any code. The inside parts are not up to any market or security specifications. I was chocked about the lack of security. It's a fire hazard ! I have 9x 150 W solar panels. Even at full performance of the solar panels ( Theoretical 1350 W) I never reached a power output of more than 450 Watt!!! I sent it back and got refunded after they offered me to send individuals parts, worth $4.50 and to soother it myself. I repeat my claim several times before I got reimbursed ! |
Is this window slider compatible with other portable a/c units? I wondered if this piece is interchangeable with other two vent units because they look very similar but I didn't see size specifications.Lastly, how to the round holes come out of the plastic? This sounds like a weird question but the two holes for venting are obvious in the picture but yet I just wondered if the "rounds" are just pushed out to make the hole for the tubing. Is this window slider compatible with other portable a/c units? I wondered if this piece is interchangeable with other two vent units because they look very similar but I didn't see size... » Read More Is this window slider compatible with other portable a/c units? I wondered if this piece is interchangeable with other two vent units because they look very similar but I didn't see size specifications.Lastly, how to the round holes come out of the plastic? This sounds like a weird question but the two holes for venting are obvious in the picture but yet I just wondered if the "rounds" are just pushed out to make the hole for the tubing. « Show Less | This window kit can only be used for Whynter A/C models ARC-14S and ARC-14SH. |
Is this window slider compatible with other portable a/c units? I wondered if this piece is interchangeable with other two vent units because they look very similar but I didn't see size specifications.Lastly, how to the round holes come out of the plastic? This sounds like a weird question but the two holes for venting are obvious in the picture but yet I just wondered if the "rounds" are just pushed out to make the hole for the tubing. Is this window slider compatible with other portable a/c units? I wondered if this piece is interchangeable with other two vent units because they look very similar but I didn't see size... » Read More Is this window slider compatible with other portable a/c units? I wondered if this piece is interchangeable with other two vent units because they look very similar but I didn't see size specifications.Lastly, how to the round holes come out of the plastic? This sounds like a weird question but the two holes for venting are obvious in the picture but yet I just wondered if the "rounds" are just pushed out to make the hole for the tubing. « Show Less | I do not know if the window slider is compatible with other units as we purchased specifically for the Whynter AC unit. The round holes are plastic and built in. When the AC unit is not hooked up to the window slider there are plastic covers that cover the openings (holes). The tubing goes directly into openings (holes) when the AC unit is in use. Hope this helps! |
Is this window slider compatible with other portable a/c units? I wondered if this piece is interchangeable with other two vent units because they look very similar but I didn't see size specifications.Lastly, how to the round holes come out of the plastic? This sounds like a weird question but the two holes for venting are obvious in the picture but yet I just wondered if the "rounds" are just pushed out to make the hole for the tubing. Is this window slider compatible with other portable a/c units? I wondered if this piece is interchangeable with other two vent units because they look very similar but I didn't see size... » Read More Is this window slider compatible with other portable a/c units? I wondered if this piece is interchangeable with other two vent units because they look very similar but I didn't see size specifications.Lastly, how to the round holes come out of the plastic? This sounds like a weird question but the two holes for venting are obvious in the picture but yet I just wondered if the "rounds" are just pushed out to make the hole for the tubing. « Show Less | its a 5" hole cut into the panel which would work for any 5" duct. I used an adapter from home depot to use a 6" duct. |
Whats it made out of? | It is made of white interlocking metal. It comes with netted lights that can bedraped over the arch for the added sparkle. |
hi. this product avh-x4500bt is new its closed and what acesories come | It comes with a remote, usb cable, microphone for bluetooth phone, wiring and mounting hardware. This is an awesome unit! |
hi. this product avh-x4500bt is new its closed and what acesories come | Not sure what you mean by "its closed" but as far as accessories go. It comes with a remote, USB cable, Bluetooth microphone, wiring and mounting hardware. Great head unit for the price. |
hi. this product avh-x4500bt is new its closed and what acesories come | Bluetooth microphone and usb cord for ipod/iphone, remote, wire hookup, screws. Its awesome. You gotta experience it. It does everything. Customize your audio,extra bass boost, different eqs and audio filters. Dvd are crystal clear. Dimmer for sunlight reflection. Countless other features. I love it. |
Does the remote work through glass windows to activate shock? | Yes, but the feeder needs to be recharged (plugged in) about 2x a week, from my experience. The remote works for me from about 30 feet. |
Surge Protectors What is the decent response time for surge protectors so the electronics does not get fried. Is "APC 11 Outlet 3400J Surge Protector" can protect 42in hd tv, 5.1 sounds system, ps3 and an 8000 btu AC? Surge Protectors What is the decent response time for surge protectors so the electronics does not get fried. Is "APC 11 Outlet 3400J Surge Protector" can protect 42in hd tv, 5.1 sounds... » Read More Surge Protectors What is the decent response time for surge protectors so the electronics does not get fried. Is "APC 11 Outlet 3400J Surge Protector" can protect 42in hd tv, 5.1 sounds system, ps3 and an 8000 btu AC? « Show Less | "A nano second response time should kick in fast enough for most spikes" For more information take a look at this page scroll down for response timehttp://en.wikipedia.org/wiki/Surge_protector |
Surge Protectors What is the decent response time for surge protectors so the electronics does not get fried. Is "APC 11 Outlet 3400J Surge Protector" can protect 42in hd tv, 5.1 sounds system, ps3 and an 8000 btu AC? Surge Protectors What is the decent response time for surge protectors so the electronics does not get fried. Is "APC 11 Outlet 3400J Surge Protector" can protect 42in hd tv, 5.1 sounds... » Read More Surge Protectors What is the decent response time for surge protectors so the electronics does not get fried. Is "APC 11 Outlet 3400J Surge Protector" can protect 42in hd tv, 5.1 sounds system, ps3 and an 8000 btu AC? « Show Less | This surge protector is only rated for 15 amps, so I think you will overload it with the devices you listed. I think you'd be better off with a separate device for your TV, sound, and PS3, and let your AC be attached to a different circuit. I'd recommend a power conditioner for sensitive electronics. Surge protectors will work, and the response time should be adequate, but it all depends on how far away the surge originates as to it's intensity. Read more: http://en.wikipedia.org/wiki/Surge_protector and http://en.wikipedia.org/wiki/Power_conditioner |
Will this fit a SeaRay 175 boat (17.5 ft) | Yes, it should fit...the beam of a 175 SeaRay is 7' (84")...the windshield or the gelcoat right underneath and outside of windshield would be a good place to mount. At 78", the width of the bimini would be a perfect fit and offer more shade then the oem bimini. |
Will this fit a SeaRay 175 boat (17.5 ft) | Anna, the important thing to consider is the width and the height of the top. Once the width fits the size of your boat measure the height from the floor and add the height of the top and this will give you an idea how high it will be on the boat. Regards, Aurelio. |
Will this work on my k-30 and k-50? amazon says no! Thank you!! | The Pentax DA 16-45 lens will work on any Pentax digital DSLR camera. I have used Pentax for many years, and any K mount lens will work on any Pentax DSLR camera. Check Pentax Forum or the official Pentax site. I have the Pentax K-5 and K-5iis DSLR cameras and my DA 16-45 works great on both. I used to have a K-30 DSR, and the DA 16-45 worked really well. |
Will this work on my k-30 and k-50? amazon says no! Thank you!! | Hi, thanks question. This lens can work for Pentax K-30, K-50. Thanks in advance. |
Will this work on my k-30 and k-50? amazon says no! Thank you!! | Absolutely! It will work with any Pentax K-Mount. It is unfortunate that Amazon has not corrected the misinformation. I am currently using on the K-01 with spectacular results. |
Will this work on my k-30 and k-50? amazon says no! Thank you!! | yes it will //// amazon doesn't know what they're talking about - by the way I recommend you use this with the K-3 // a great combination !! |
Is the wax warmer portable? | it can be but you have to be extremely careful, i took mine to my new place and had it safe in my car the wax was completely hard and yet still managed to get all over the place i had to get a new wax heater. so just put it somewhere safe if you have to travel with it. |
Is the wax warmer portable? | Technically it could be portable, although after several uses, and extreme care to keep the container clear of wax, it still gets sticky and messy. Would I be carrying it around with me? probably not. Now if you say is it portable from one room to another, then yes absolutely, and if you're talking about taking places with you once in a while, sure... but I do not recommend habitual portability ( unless again you're just asking about it from one room to another). |
is it fit with avalon limited 2012 ? | What would you want to use them for? The would be good for front daytime running lights for sure. Would take about 5 sets to get a good look though they can be mounted pretty close together and can be hooked up all to one power wire and will work great |
Can it reduce engine noise? | I don't believe so, Rick. Mainly for cleaning injectors, valves, and stabilizing fuel. I know a lot of people who like the Lucas Oil Treatment, though, for engine noise and protection. I just very recently switched to it, myself, since Slick 50 sold out and changed their formula. Too recent to know the results, yet. Kevin |
Can it reduce engine noise? | It appears to in my Cummings powered motor home. I notice no difference in my gas vehicles as far as noise. But it should since it lubes parts. Either way I use it, great stuff, in all my vehicles. |
Can it reduce engine noise? | Yes, that is one reason I use it. Place I bought the car recommended it. Long story short bought two gallons from Amazon, 7,000 miles ago. Running smoother since.... |
Can you replace the blade on this unit? | Yes, you can replace the blade in this saw. The Bahco blade is held in to the handle with a large Philips screw on the locking button side, and a locking nut in a captive slot on the reverse side. I haven't seen the exact blade used in the Laplander saw listed separately for sale here in the US, but it's a common replacement overseas, especially in Europe. NOTE: The 396HP blade is for the 396HP 7-1/2" saw, the 396JT blade is for the 396JT Japanese Tooth style saw. Both of these blades are NOT the original blade for the 396-LAP 8" Laplander saw. Links below: 396-JT: http://www.amazon.com/dp/B0001IX7OM/ http://www.amazon.com/dp/B0034076OQ/ 396-HP: http://www.amazon.com/dp/B000288XPY/ http://www.amazon.com/dp/B0001IX7N8/ 396-LAP: http://www.amazon.com/dp/B0001IX7OW/ |
is this a folding knife | No it's about the same size as a Buck 112 but fixed blade. Very nice knife for everyday use. |
is this a folding knife | No this is a fixed blade.If you're looking for a folding knife similar in blade shape look into the Buck Vantage knives. |
What size should I buy? I have a 30" inseam, waist: 27" and hips: 37". Thanks for help. | According to the size chart, try a size 28 (US 6). I find the sizing accurate. |
I have a Pyle PCA2 stereo amp (2x40W) hooked up to my computer. Which would be the right speakers for this amp? Was using ONKYO 70 watt that just quit | We are using the Pyle PCB4BK Book Shelf speakers with the amp as part of a portable system to provide sound when we project lyrics. While not concert hall sound they provide clear and low distortion amplification that fills a 15 x 40 ft room when connected to a laptop. |
does it come with strap pins? I saw them on the picture of the black model, but not the blue one | Mine did, on the bottom. There should not be one on the other end as far as I am concerned, allows you to put it where you want. |
does it come with strap pins? I saw them on the picture of the black model, but not the blue one | one at the bottom. so A pin not plural...but it has a terrific, sound keeps its tune and is crazy easy to play; for the money you can't beat it. Some professional muscian friends of mine tried it and could ot beleive it was so cheap. Great tone! And the little equalizer does some awsome stuff for such a small device. Get this- you won't regret it. |
does it come with strap pins? I saw them on the picture of the black model, but not the blue one | Indeed the guitars do come with only 1 strap peg on the bottom of the guitar so you will have to install one on the top of the guitar body |
can someone tell me how you get this to play through one artist on to another?? i just got mine and i really like it but it stops after each album | I have the same problem. Overall I am not impressed. Ill keep it though for a back up. Buy a product called Genius, they are awesome. |
can someone tell me how you get this to play through one artist on to another?? i just got mine and i really like it but it stops after each album | With the little that I have played with it (I got it for my wife, so she uses it more), there is probably not a way to do so directly on the device itself. That said, you could probably create playlists (or smart playlists) to get the effect you want. It is a crappy workaround and probably requires initial setting up to have it on hand, but that would work. |
can someone tell me how you get this to play through one artist on to another?? i just got mine and i really like it but it stops after each album | I use an I-POD to send MP-3's to the Boombox. I wet the I-POD to shuffle and have not had a problem. Never tried playing an album at a time. Good Luck. |
Does this ukulele come with Aquila strings? Thank you! | Yes, with high G which I changed to a low G. Just an FYI, I also purchased a Kala KA-TE Mahogany Tenor Electric at the same time for my daughter. While the High Tide uke is really nice looking and also plays very well, the Kala I think sounds better. In fact I have also purchased an Oscar Schmidt and Lanikai ukes and the Kala is (in my opinion) the best sounding of all of them. More info than you wanted but thought I would share my thoughts. |
Does this ukulele come with Aquila strings? Thank you! | Yes, that is what is strung on it...but there is no "spare" set if that is what you are asking. |
Does this ukulele come with Aquila strings? Thank you! | Sorry, I answered the question about the wrong uke. I purchased this one as a gift for someone else. I did play it first before gifting it and I am pretty sure that it was Aquila strings as well. Everything else I said still holds true. |
Is this clear plastic or white? Can you see through it? | It's clear. But fyi it does NOT fit a king mattress. It is a thick plastic though. I ended up using it to cover furniture when I moved. |
How the hell did this item go from 44.99 to 54.99 in less than a week and a half?? | I'm also disappointed, now it's up to 69.99! It use to a bargain compared to Anker. Not sure about that anymore... It must be demand like everything else. Did you find an alternative? |
How the hell did this item go from 44.99 to 54.99 in less than a week and a half?? | I have not (for a lower price) but at least with Anker, one has their 18 no hassle warranty. (I was unable to find the stated warranty for this product in its description). |
How the hell did this item go from 44.99 to 54.99 in less than a week and a half?? | The company can change the price of the item whenever they want. They probably looked at their competitors, and similiar 14W chargers, and adjusted. That's the world of capitalism, daddy-o. |
is this case water proof and sand proof and shatter proof | Just purchased the case, I have No idea if it really is water proof or shatter proof. |
is this case water proof and sand proof and shatter proof | The case is not waterproof, but it is sand and dustproof. It does offer very good shatter proof protection, but I feel the screen could still crack if dropped or hit just right. My six year old boys are using them and they have worked well. |
The description says "For ages 3 and up." Does that mean 3 years and up or 3 months and up? | I bought it for a 6 month old. She very soon learned to crawl off it. I imagine it would be most fun at a slightly older age when it would begin to have meaning for the child. |
The description says "For ages 3 and up." Does that mean 3 years and up or 3 months and up? | I don't know what the manufacture meant by ages 3 and up but our family have used the mat on the floor of the playroom for our newborns. As the children grow, they play on the mat as a soft cushion on the hardwood floors. |
Subsets and Splits
No saved queries yet
Save your SQL queries to embed, download, and access them later. Queries will appear here once saved.