query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
what is the micron level for this filter? | 25 -- I tried a 15 and an 11 and the water flow was very restricted. the 25 works well and keeps water clear and clean |
what is the micron level for this filter? | The GE filter has a 25 micron level. Also it reduces chlorine taste and odor. |
What government issues this and to whom? Growing up next to a large Army Post, spending a lot of time at surplus stores, hanging out with old timers, 16 years in the Army and Army National Guard myself, I've never seen one of these. What government issues this and to whom? Growing up next to a large Army Post, spending a lot of time at surplus stores, hanging out with old timers, 16 years in the Army and Army National Guard... » Read More What government issues this and to whom? Growing up next to a large Army Post, spending a lot of time at surplus stores, hanging out with old timers, 16 years in the Army and Army National Guard myself, I've never seen one of these. « Show Less | I have never seen one of these while on active duty n the Army. Even when bayonets were issued, never received a sharpening stone, what is the nomenclature and national stock number? |
Where are these made? I"m looking for spoons NOT made in China. | These are made in China, and they're awful. Double whammy. I'm pretty sure Nuk spoons are made in Germany. . . Better than China. |
On one of the pictures it only shows Celsius for Temperature. Is that all it shows or does it also show Fahrenheit would seem so | It does show Fahrenheit as well. Just a side note; this is hands down the best deep fryer that I have purchased for the money. I have had several throughout the years and this is the best! The only issue I had was you have to put the timer on to keep the fryer running, its not a problem but needs to be done. |
On one of the pictures it only shows Celsius for Temperature. Is that all it shows or does it also show Fahrenheit would seem so | My knob 'only' shows Fahrenheit (if that helps) I usually keep my temp at round 340 (which gives a nice golden crisp to everything) |
Does this computer have a backlit keyboard? | Oh yeah. Any color you want. I just bought a second Dominator for my wife from Computer Upgrade King, really love this computer. Nice feel to the keys, too. Keyboard by SteelSeries. |
Does this computer have a backlit keyboard? | Yes it does and you can change the color but the rainbow look is actually pretty cool |
Does this computer have a backlit keyboard? | Yes it does. The keyboard can be lit up using various colors and has various patterns such as solid (Key board is always same color), wave (keyboard lights up from left to right), Breathing (keyboard flashes on and off), dual color (keyboard changes between 2 colors every 3 seconds), etc. |
can these batteries be used in solar lights? | I would only use these if the solar light was made specifically for NiMH batteries. Other types of batteries will have different charging profiles/protection circuits and may not work or may even be dangerous if used in the wrong application. |
can these batteries be used in solar lights? | they are not designed for solar. Amazon sells solar batteries, by moonray, for around same price. |
Can the display color be changed to red? | Yes you can change to any color. I have mine set on orange to match my instruments. It is a awesome unit. |
Is this item BPA free? | It doesn't matter. BPA at the levels incorporated into most plastics, does not present a risk to humans or animals. The risks of BPA are tremendously over-exaggerated. Give it a rest. |
Does the cable go inside the handle bar or outside? I want to put on my recumbent trike. | Not inside, but right alongside it. If you want you can wrap the handlebar tape over the top of it or carefully cut the end off of your grips and route it under those too. This is very tricky and you might have difficulty doing that. Or you can have it move away from the bar rather quickly which works well with drop bars. You can do a google image search for "bar end shifters" and see a bunch of pictures of how people have them set up. If you want to move these shifters to the handlebars there is a mount sold by Velo Orange that will allow them to be turned into "thumbie" type shifters seen on mountain bikes but they are $58 http://store.velo-orange.com/index.php/vo-thumb-shifter-mounts-22-2-23-8.html It would be cheaper to find some 8-speed MTB trigger shifters but the issue there is that often the indexing of the front trigger shifting would be MTB indexing and not road indexing. It depends on what you have on your 'bent. Personally I would probably go with the VO mounts myself. These bar-ends are such a good deal for HIGH quality shifters that even having to pay more for the mounts you still get a deal IMHO. Quality bar-ends used to run $140+ a few years back. |
i'm redoing my daughter's bedroom and i want to surprise her with a canopy. this looks really amazing but she has a full sized bed. will it be too long | Good Afternoon. This canopy will work fine with a full size bed. I hope this is helpful. Please let me know if I can be of further assistance. Sincerely, Sarah-HearthSong Customer Service |
i'm redoing my daughter's bedroom and i want to surprise her with a canopy. this looks really amazing but she has a full sized bed. will it be too long | My daughter got this for Christmas. She has a full size bed. It is the perfect size. |
i'm redoing my daughter's bedroom and i want to surprise her with a canopy. this looks really amazing but she has a full sized bed. will it be too long | My granddaughter has a full size bed and loves. It is more a matter of the height of the ceiling than size of the bed to make it work. |
I have a Makita 4" disc grinder. Is that considered a fixed-speed high speed grinder? | I think it is not a high speed the appropiate thing for this diamond polishing pad |
I have a Makita 4" disc grinder. Is that considered a fixed-speed high speed grinder? | if it only has one speed, on/off, it is considered a fixed-speed. but it's not always high speed. |
I have a Makita 4" disc grinder. Is that considered a fixed-speed high speed grinder? | You would realy have to look atthe grinder model you have, does it have a switch for different speeds? Does the model label state the RPMs if it is fixed? If so is the speed(RPM's) higher than the ratings of the polishing disks? |
I have a Makita 4" disc grinder. Is that considered a fixed-speed high speed grinder? | It sounds like you have a standard "grinder" that typically uses metal or concrete grinding or cut off wheels. If you are considering using your grinder for the concrete polishing pads consider that these polishing pads will work dry BUT they will burn out quickly and it will be difficult to get an even smooth appearance. In my experience they aren't best used dry but with a wet polisher. I only use the pads with a wet polisher - mine is a makita and it works great. I recently did 3 countertops - one was about 2x11 and the others were much smaller. The pads worked very well. With projects the size of mine you will need multiple pads per grit. Hope this helps. |
I have a Makita 4" disc grinder. Is that considered a fixed-speed high speed grinder? | It sounds like you have a standard "grinder" that typically uses metal or concrete grinding or cut off wheels. If you are considering using your grinder for the concrete polishing pads consider that these polishing pads will work dry BUT they will burn out quickly and it will be difficult to get an even smooth appearance. In my experience they aren't best used dry but with a wet polisher. I only use the pads with a wet polisher - mine is a makita and it works great. I recently did 3 countertops - one was about 2x11 and the others were much smaller. The pads worked very well. With projects the size of mine you will need multiple pads per grit. Hope this helps. It sounds like you have a standard "grinder" that typically uses metal or concrete grinding or cut off wheels. If you are considering using your grinder for the concrete polishing pads consider that these polishing pads will work dry BUT they will burn out quickly and it will be difficult to get an even smooth appearance. In my experience they aren't best used dry but with a wet polisher. I only use the pads with a wet polisher - mine is a makita and it works great. I recently did 3 countertops - one was about 2x11 and the others were much smaller. The pads worked very well. With... » Read More It sounds like you have a standard "grinder" that typically uses metal or concrete grinding or cut off wheels. If you are considering using your grinder for the concrete polishing pads consider that these polishing pads will work dry BUT they will burn out quickly and it will be difficult to get an even smooth appearance. In my experience they aren't best used dry but with a wet polisher. I only use the pads with a wet polisher - mine is a makita and it works great. I recently did 3 countertops - one was about 2x11 and the others were much smaller. The pads worked very well. With projects the size of mine you will need multiple pads per grit. Hope this helps. « Show Less |
I have a Makita 4" disc grinder. Is that considered a fixed-speed high speed grinder? | You can use a fan speed controller to reduce the speed of an angle grinder. They cost about $25 |
Hi, I will be in new York next week. I will stay there for five days. Do you have any fast deliver.? If you dont have i can pickup this in a shop plac | Hello,this is King Dental,we would like to answer ur question.Our fastest deliver is Fedex,but it should take 7 days at least to confirm u receive it.Thanks!If u have any other concerns,free to let us know!Thanks again! |
Hi, I will be in new York next week. I will stay there for five days. Do you have any fast deliver.? If you dont have i can pickup this in a shop plac | Dear Rosel, this is Oubo Dental, I would like to tell you that our fast delivery is FedEX or DHL, it will take 2-7 days to get to New York. If you would like to buy one you can order it in advance. Hope it helps. |
Hi, I will be in new York next week. I will stay there for five days. Do you have any fast deliver.? If you dont have i can pickup this in a shop plac | Dear Rosel, thanks for your questions. If you order the item and send us message that you want the item eagerly. And we will send the item for you with DHL or FedEx, it will take 2-7 days to you. Hope it helps. |
My husband wears size 12 shoes, should I buy XL? | I wear a woman's size 10 shoe and the large are big on me, but for a men's 12 I would suggest the XL. |
My husband wears size 12 shoes, should I buy XL? | I wear a 10 and fit perfectly into a medium, so I'd suggest Large, not X Large. |
I've been building my system for several years; Have a Technics 100w per ch, pr Yamaha 3-ways, teac dual casette, will these spekers fit well with the | I have a similar system to yours although all my components are mostly Sony. My primary speakers are Athena 125 watts per speaker, each containing a woofer, subwoofer & tweeter. I have had these Cerwin Vega VE5M speakers for about six months now, and am very pleased with the quality & sound. Although they sound great alone, I use them in conjunction with my Athenas & the increase in sound range is incredible. Although I'd highly recommend the Cerwins alone, with systems like ours, they are designed to increase the sound range, and they do the job! your system will sound twice as good if you add these to your existing speakers (although you might find they out-class your Yamahas!) -Good listening-Will I have a similar system to yours although all my components are mostly Sony. My primary speakers are Athena 125 watts per speaker, each containing a woofer, subwoofer & tweeter. I have had these Cerwin Vega VE5M speakers for about six months now, and am very pleased with the quality & sound. Although they sound great alone, I use them in conjunction with my Athenas & the increase in sound range is incredible. Although I'd highly recommend the Cerwins alone, with systems like ours, they are designed to increase the sound range, and they do the job! your system will sound twice as good if you... » Read More I have a similar system to yours although all my components are mostly Sony. My primary speakers are Athena 125 watts per speaker, each containing a woofer, subwoofer & tweeter. I have had these Cerwin Vega VE5M speakers for about six months now, and am very pleased with the quality & sound. Although they sound great alone, I use them in conjunction with my Athenas & the increase in sound range is incredible. Although I'd highly recommend the Cerwins alone, with systems like ours, they are designed to increase the sound range, and they do the job! your system will sound twice as good if you add these to your existing speakers (although you might find they out-class your Yamahas!) -Good listening-Will « Show Less |
Can this 48v POE injector be used for 24v POE Access Points? | This may be what you need: http://www.amazon.com/WS-GPOE-B-12-24v120w-gigabit-Ethernet-Injector-supply/dp/B00EQDMWIK/ref=sr_1_2?s=electronics&ie=UTF8&qid=1420652252&sr=1-2&keywords=WS-GPOE-12-24v |
Can this 48v POE injector be used for 24v POE Access Points? | No - please see our gigabit injectors with 24 volt power supplies. WS-GPOE-12-24v120w |
Can this 48v POE injector be used for 24v POE Access Points? | This may be what you need:WS-GPOE-B-12-24v120w gigabit POE 12 Port Power over Ethernet Injector with 24 volt 120 watt supply |
Can this 48v POE injector be used for 24v POE Access Points? | Sorry, I do not know! Contact seller for sure. I am running several 48v IP phones and 48v APs successfully. |
Is it stable enough at max height for landscape photography? | Good question. Yes, if there is no wind (or perhaps light wind). If the wind is more than light, expect some shaking. |
Is it stable enough at max height for landscape photography? | Not very stable. It's very light. But it has a hook where you can hang something heavy to stabilize the tripod. |
I need a black or dark color. Is this a dark blue? | hey now, The one I got was white. I don't believe they even offer blue. I'm not even aware whether they offer black...sorry can't help. |
So if I have tiled bathroom walls, this isn't happening, right? | You can drill through tiles. Be sure to get a TILE bit and then use electrical tape to mark an X where you want to drill. Use a power drill and SLOWLY drill through the center of the tape to drill the hole. Ensuring you only press hard enough for the bit to bite and let the bit do the work. Drilling tiles is SLOW steady work, you can't rush it. |
So if I have tiled bathroom walls, this isn't happening, right? | I wouldn't try it. There are four screws that hold the shelf onto the wall securely. You would have to drill through the tile which is not advisable. I guess you could ask a handyman. |
So if I have tiled bathroom walls, this isn't happening, right? | It would work. But you would need the right drill to pre drill through your tile without cracking it. |
What size for comforters for a twin and a queen bed? | The large bag is very large, don't have measurements because I used them all. I put King size comforters in mine, others I put multiple items in. Make sure to gently stretch open the zipper capacity as it seemed tighter; but as I worked with it some it opened up even more. My entire linen closet is full of these now. Easier to find & I know they will stay fresh. |
What size for comforters for a twin and a queen bed? | Large. I complained that the product leaks and was a waste of money. The company gave me my money back to remove the negative feedback. |
What is the hotshoe on top of the transmitter for, I was hopping it would allow ttl passthrough for the flash mounted on it. any one able to us it ? | I have never used it. According to a review I read, it doesn't support ttl pass-thru for canon, only for nikon and sony. |
What is the hotshoe on top of the transmitter for, I was hopping it would allow ttl passthrough for the flash mounted on it. any one able to us it ? | I can't figure out why they didn't make it active, but unfortunately it isn't. Aside from being made with thin plastic, that is really the only thing I have against them. |
What is the hotshoe on top of the transmitter for, I was hopping it would allow ttl passthrough for the flash mounted on it. any one able to us it ? | No it will not work. As per Pixelkings info the hotshoe on the transmitter is for a future transmitter accessory (such as a ratio attachment) and will not trigger a flash when mounted to it.See here under hotshoe:http://www.f64.ro/downloads/Manuale/Pixel/PIXE%20King_PSM3V10.pdf |
will i be able to run a 4 gauge wire kit and monster speaker wires? | Yes, 4 gauge will work. I sell these amps and install them, nice amp. your speaker wire should be no less than 12 gauge... |
There are multiple inputs now, my ipod uses the 30 pin (about 1 inch long connector) does this one fit that?? | Yes it does. The 30 pin fits perfectly. I use my 1st generation iPod on it. Also, the iPhone 4 works on it too. |
What is its capacity/volume in ml? | Hi,Taken from their website (you'll have to convert!) http://www.bentgo.com/dp/B00B7N848ENote: Bentgo is NOT leak proof. It does seal very well, but to be safe when packing dressing, fruit, and other liquids, be sure to keep the Bentgo upright during transport.Top Container Size: 6.8" x 4.3" x 1.7" (2 sections with divider, each section 3.4" x 4.3" x 1.7")Bottom Container Size: 7" x 4.5" x 2.5" |
What is its capacity/volume in ml? | According to their description, the bottom tier is 79 cubic inches (7 x 4.5 x 2.5"), the top tier is 50 (6.8 x 4.3 x 1.7"). That converts to 1295 cc & 819 cc. That's HUGE. Even just the smaller one would be a substantial meal if properly packed. If you're using less dense food (instead of traditional bento arrangement) you might want to use the larger one, or even both of them. |
How do you open the top to clean? | Brenda, press the 2 buttons on either side of the top (like when you're ready to make coffee) and once the top is tilted at a 45 degree angle, you'll notice that the hinge of the top can be detached from the pot - just by pulling forward slightly should help it come loose. Hope this helps! |
How do you open the top to clean? | I believe that the top has only air passing thru to the tube which delivers the drink, therefore no need to clean. Hope this helps. Great unit for dispenseing hot or cold liquids. Just as noted you can tilt the lid back to remove it and rinses. |
How do you open the top to clean? | The top does come off at the hinge as someone else said, angle the lid and pull forward, should come off. I find it somewhat difficult to replace but "wiggle" the top a bit and the hinge will reattach. I rinse my pot daily and fill it with hot water while the coffee is brewing, this heats the pot and cleans it at the same time. I do clean my pot regularly (once a month) with a drip coffee maker cleaner. (such as Dip-It) Just soak with the tube in the pot and then pump it out. Rinse well with clear water and it takes all the residue out of the pot. Hope this helps. |
proper 7.1 speaker placement? Is there a chart or a link that describes the layout options for 7.1 speakers that anyone can recommend? | Hello. There are guides all over the Internet, but I would recommend going to Dolby's website. There is an interactive Home Theater Speaker Guide that will allow you to select speaker quantity, distance from the television and sitting area, and will give you angles for each speaker. The 7.1 Speakers does have four rear speakers. The two back speakers are generally set up at the edges of the sitting area, angled inwards toward the center of sitting area. The two rear speakers are set up on the sides of the sitting area and angled in slightly towards the center of the viewing area. Hope this helps. Scott |
Does this model come with it's first filter, or do I have to purchase seperately? | Yes it does. It uses two types of filter, one which is meant to be permanent, and one which is meant to be replaced periodically. It comes ready to go with both. In the past I simply vacuumed the replaceable filter between replacing it and that seemed to work pretty well also. |
Does this model come with it's first filter, or do I have to purchase seperately? | Yes, includes first filter. I am real happy with the unit overall. Good Value -- just plug it in and turn it on. also if you register unit on site, it will send you email reminder of when to replace the filter. |
How does this feel in the hand? Cheap? Sturdy? | it felt a bit cheap when it isn't loaded with weights, but then again i like heavy mice. The plastic i feel should be less glossy and more of a matte finish. The heat from a persons hand tends to make it feel sticky over time and I'm constantly readjusting so there's a bit more glide between mouse movements. The material on top of the mouse would be a better replacement to the plastic right palm side. The mouse wheel feels a bit odd and stiff to scroll, but i believe it'll go away once it's more broken in. The mouse is pretty nice and is wide enough that my hand can comfortably hold it. I still need some further time with it though to see how it is in the long run of gaming. Still it is a pretty nice mouse though for the price. |
How does this feel in the hand? Cheap? Sturdy? | It's quite light without the weights, feels quite sturdy. The cable is braided, strong and quite long if you like leaning back.Not cheap at all imo, The main body is matte finish, the rubber side keeps your hand fixed instead of slipping to the table. Might need to get used to not clicking the side buttons by mistake tbh if you've got a small hand |
How does this feel in the hand? Cheap? Sturdy? | It feels somewhere in the middle. I loaded mine with most of the weights and it feels a lot better. My problem is that the shape and feel of it in my hand is wrong, its shaped more for the left hand than the right. It's sort of awkward. |
Optical: Does this cable have an optical output? | This does not come with an optical output. You have to purchase the fiber optic cable made specifically for the X Box 360 which comes with the needed adapter in order for this cable to output Dolby Digital 5.1 sound. |
What vehicles does the belt fit,; I have a chevy trailblazer | I am pretty sure it will fit any vehicle. I have a BMW X3 and My husband has a Ford Edge and it fits both. |
What vehicles does the belt fit,; I have a chevy trailblazer | The seat belt plugs into the safety belt connection. Some vehicles do vary. Ours is a 2000 Buick Regal. But it should fit most safety belt connections. Hope this helps! |
What vehicles does the belt fit,; I have a chevy trailblazer | I'm not sure, I just know it didn't fit my older chevy malibu but fits my sister's new ford suv. |
What vehicles does the belt fit,; I have a chevy trailblazer | I have a Jeep Cherokee and my husband has a Chevy Trailblazer. It fits both vehicles. |
What vehicles does the belt fit,; I have a chevy trailblazer | It fits all cars or trucks. It is universal. It works great on my 2 dogs & the "play" in the belt can be adjusted to shorten or lengthen it. |
What vehicles does the belt fit,; I have a chevy trailblazer | It seems to be a universal buckle. I have a Lincoln MKZ, GMC Sierra and a Jeep Wrangler and it fits all of them. |
What vehicles does the belt fit,; I have a chevy trailblazer | It fits all cars or trucks. It is universal.It works great on my 2 dogs & the "play" in the belt can be adjusted to shorten or lengthen it. |
What vehicles does the belt fit,; I have a chevy trailblazer | I believe it will fit all cars...It hooks right into your car seat belt and the other end hooks onto the collar of the dog. Look at the photo and maybe you can see what I am talking about. |
will these fit honda 2006 civic ex coupe | It should fit the 8th generation of honda civic cars. I have a 08 LX, works fine. |
will these fit honda 2006 civic ex coupe | Nope. You need a different set for the coupe. Check the kyb website for the part number before ordering |
Will these fit an 81 Yamaha 650 Maxim? | they should, they are universal fit and each side is three pieces so they are infinitely adjustable, just be sure to use thread locker when you put them on |
Will these fit an 81 Yamaha 650 Maxim? | I believ they will because you can move the bolt holes a bit, however I would spend a bit more and get direct fit, the vibrations while riding make the bolts on the bottom of the bracket loose and that's never good |
Will these fit an 81 Yamaha 650 Maxim? | I have no idea what they fit as I couldn't figure out how they worked so I just through them away! Would no recommend this product! |
Am trying to replace a dead vcr/dvd player with this unit. Do I absolutely need a cable box? My old vcr connects directly from cable. | Cannot answer the question without a lot more information. Is your "cable" coming from a cable company that you are paying for? Then I suggest asking them. If your "cable" is coming from your own antenna and you are just getting free over-the-air TV then you need a vcr/dvd with a "digital" tuner. Assuming that your dead vcr/dvd player just died recently and you were able to watch TV and record on the VCR with no problems then the best thing to do is to replace it with one that works the same way. DVD/VCR combos generally come 3 ways: 1- with an "analog" tuner; 2- with a "digital tuner"; 3- with no tuner. Find out what kind of tuner your old VCR/DVD had and replace it with one that has the same kind of tuner and it should work with the same connections. If you don't know what kind of tuner it had search the Internet with the model number and it will likely show up. If it is more than 4-5 years old it probably had an "analog" tuner. Be aware that no one is currently manufacturing VCR/DVD combos with tuners. Whatever is out there new will have no tuner which will not work for you if you only have a cable and no cable box or separate tuner. If you find a vcr/dvd with a tuner it will be used, refurbished or NOS (new old stock). They are hard to find and usually expensive when you do plus many of the used or refurbished ones usually don't work right if they work at all. I went through half a dozen before I found a good one. |
Can anyone upload a photo of this keyboard while it is NOT illuminated? It's hard to get a good look at it with only the one photo. MUCH APPRECIATED!! | I had the same question. Found this video on YouTube: http://www.youtube.com/watch?v=PKPIWgZP1HQ |
Can you bridge the two output channels? I was interested in using this to play music through my home center channel. | No, there is no way in this amplifier to bridge the channels. If your center channel is 8 ohms, then I would recommend the Dayton APA-150. |
Can you bridge the two output channels? I was interested in using this to play music through my home center channel. | Hi. I don't know for sure, but my understanding is that you cannot bridge this amp. Cheers |
Can you bridge the two output channels? I was interested in using this to play music through my home center channel. | I'm not sure. There is no internal switching for this, but, in principle, you could do it externally. Very little information comes with the unit, and I've never seen a circuit diagram. Although you would probably be OK, I have noticed that the output protection circuit is very touchy. For some reason it refuses to let the output relays close when the line voltage is greater than 127V. (I bought a voltage regulator.) So, I guess I would be wary of doing anything unusual with the output. |
Is this for a twin mattress or full? | Thank you for your interest in our product. This item you are inquiry for is Full Size Bed as the tittle stated. Thank you and have a wonderful day! --FurnitureMaxx |
Is this for a twin mattress or full? | We ordered the full size but I believe it comes in twin size as well. (the one in the picture looks like twin-size to me) |
Anybody ever use this for trimming a little dog? Why would it not work on animals? | I actually used this Wahl 79520-500, hair cutting PELUCHE that's the name of my pet, what I do is that bathing the hair, dry then I cut hair, I do it to prevent dust which may wasting's take a razor's edge. (The end result is amazing). |
Anybody ever use this for trimming a little dog? Why would it not work on animals? | The reason another answer said you couldn't use it on animals is simply because of the noise. I think most pets would be terrified by the snap of the switch and the loud buzz. Peluche is a brave pet, with confidence that his owner won't harm him. |
Anybody ever use this for trimming a little dog? Why would it not work on animals? | No idea since I have no experience with cutting animal hair or how those types of shears are constructed. But I would imagine that it would work in the same principle where the longer and thicker the hair is the longer it would take to cut and how quickly it would dull the blade. |
Does it work for surface? | It should work just fine. I use it with my Toshiba encore 2 Windows 8.1. It works great. |
Does it work for surface? | Yes, it does. I just removed the cover of my Surface, went to "Devices and Printers," turned the Anker on, pressed the "connect" button on the Anker, then chose "Add a Device" on my Surface Tablet. The Surface prompted me for a number to type in (on the Anker) to link up to the Anker Keyboard. I have typed this message using the Anker on the Surface. Hope this helps you. |
Will this drive work as a cache drive in the MSI z97 Gaming 7 motherboard? | It will. There is also included software to use it as a cache. However, I would suggest getting a faster drive. This specific one is very small and therefore makes speed concessions as a trade-off for size. |
Will this drive work as a cache drive in the MSI z97 Gaming 7 motherboard? | I believe that this drive will work on that motherboard it is a m.2 ngff ssd and it looks like that motherboard will accept m.2 ssds |
How easy is this to use? Does it come with software for organizing music? A manual? Giving as gift to MP3 player newbie any opinions welcomed. | No manual, fairly easy to use. Not compatible with iTunes. I do not recom this for anyone above the age of 9 or 10. Cheaply made product. |
will the sheets fit a pillow top full matress? | Not at all. It barely fit a regular comfortable mattress. Its looks good though once its all put together. It didn't come with the bed skirt like I thought either. |
will the sheets fit a pillow top full matress? | I don't think so - we use them on regular size mattresses. They don't seem extra deep for a pillow top. Good luck! |
mine is just making a clicking noise when I press power button? :-( | Have you charged it ? We had to charge it for like an hour then it worked but if not that doesnt work ask for an excahange |
Does anyone know if it is air travel compliant...can I take it on a plane? | Not sure, call your airline. I'm sure you could check it, they would box it for you. My sister keeps one at her winter home and one in Florida. |
Does anyone know if it is air travel compliant...can I take it on a plane? | Call the airline and ask them....not all airlines have the same guidelines. |
Does anyone know if it is air travel compliant...can I take it on a plane? | I have always put it through as baggage, there is no charge for medical equipment, and I use their wheelchairs as a means of getting on and off the plane and claim it at baggage claim, which usually it is kept in a separate place so I ask for it. I have never had a problem. It is the greatest rolling walker , I own 2 actually. The wheels like on a car get a little bald after a while. I do recommend the Hugo, The Elite if you can afford it, is your best bet,when the wheels get worn, then buy the stripped Hugo and put the accessories from the Elite on it, smart way to go. I highly recommend it, it is so great, I found it so helpful for getting around my oxygen,when it was needed, placed it in the Elite pouch. Also the seat is comfortable and a lot of space under the seat. Happy Landings!!. |
Has anyone tried to use it for hot tea? Has anyone tried to use it for hot tea? | I actually purchased it so that I could use it for hot tea. I was using double-walled glass tea bottles and kept breaking them. I drink mostly loose leaf tea and found a strainer that fits in the top of the 22oz Go Glass -- it was from one of my old smaller stainless tea bottles. You can use a teaball or use teabags. HOW I MAKE HOT TEA: I temper the Go Glass with hot tap water then add my loose leaf tea, put the strainer in and add the near boiling water from my hot water dispenser. Works great! It is a little hot to the touch, but with the silicone cover it can be handled. As with any glass, the key is to use hot tap water to temper it. Don't ever just take it out of the cold car and add boiling water. It will shatter like any glass would. Even the tea bottles need to be tempered. I once added boiling water to one that sat in the cold car all night and the inside wall shattered. Although I just purchased this 22 oz Go Glass bottle a couple days ago, I can already tell I am going to love it. It is more durable, easier to hold on to, and looks cool. Hope this helps. |
What is the length of this cord? | 5 feet, fully extended. I just used it while traveling for a week, it worked flawlessly. |
what do you guys mix it with? i cant stomach it with any juice i tried :| | I buy this one sometimes because it's cheap. But I agree with you, there's no covering up the gross taste! I just mix it with juice & take it like a shot. Have you considered trying their tablets instead? It might help. Also, it's a bit of a splurge, but I think Navitas Naturals wheat grass tastes a LOT better & you can get the morning wake up with much less. |
what do you guys mix it with? i cant stomach it with any juice i tried :| | Strawberries, bananas, and protein powder cover the taste right up for me.. |
what do you guys mix it with? i cant stomach it with any juice i tried :| | I add a half scoop to my fruit/veggie/green smoothies in the morning and afternoon. I can't even taste it. |
what do you guys mix it with? i cant stomach it with any juice i tried :| | Update: I tried mixing it with coconut water & it tasted SO much better! I used Amy & Brian's Coconut Juice- a bit sweet but with no added sugar. It covered up the wheat grass really nicely |
what do you guys mix it with? i cant stomach it with any juice i tried :| | you can put it in a blender and mix with strawberries or any fruit that you like with ice and make a smoothie ,i drink it with just water room temp but the benefits outweigh the taste it has done miracles for my digestion.if you try to drink it plain with just water not cold and make sure its the first drink of the day |
what do you guys mix it with? i cant stomach it with any juice i tried :| | Try mixing it in a smoothie that has strong flavors. Berries usually have the best cover-up like blueberries and strawberries. If you're looking to completely mask the taste I have not come across a mix that covers it. |
Subsets and Splits
No saved queries yet
Save your SQL queries to embed, download, and access them later. Queries will appear here once saved.