query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
...Follow-up: Why can't I just use a spliiter I have and hook it up backwards as a combiner? | There is nothing stopping you from trying that but my guess is that it will not work. I did that (used a splitter backwards) some years ago and, after discovering that it was worse than just twisting wires together, gave up on the idea until I found the Channel Plus Splitter/Combiner. Unlike a "Y" in a hose or pipe, electronics is not necessarily bidirectional unless designed to be that way; hence most are called simply "splitters" and few are called "combiners" or "splitter/combiner." |
How does this compare to the Lasko heat Exchanger 6601? | I don't know how that product works but my Honeywell works extremely well and is energy efficient I would use any other heater because this Honeywell does everything I need a portable heater to do and it does well in large rooms to! |
I just went to install it and discovered the handle is incredibly stiff. It has little if any range of motion. Is this normal? | Our complaint is how loud it is when the water runs through it . It sounds like I'm needs a screen in it.did anyone notice this? |
I just went to install it and discovered the handle is incredibly stiff. It has little if any range of motion. Is this normal? | I didn't have that issue. It does work differently than an American faucet (if I recall correctly, it's in a second home) I think rather than front to back movement you work it sidewise (I think) |
I just went to install it and discovered the handle is incredibly stiff. It has little if any range of motion. Is this normal? | no I thnk that is not normal. Mine has no problem swiveling, even tho i rarely do turn it |
My tart pan arrived with little sticky pads between the removable bottom and the frame. Am I supposed to take those off or leave them on?? | Take them off because you don't want a leaky pan. Actually, mine didn't come packed this way.......but remove. Happy baking! |
My tart pan arrived with little sticky pads between the removable bottom and the frame. Am I supposed to take those off or leave them on?? | Mine did as well, remove them, they are just for packing purposes. The bottom of the pan is removable for serving/presentation purposes. |
I have an eflite 3s with ec3 connector. Does this charger have the correct adapter? | The charger comes with a balance connector circuit board (external) that will take your 3S balance cable. The charger also comes with a set of jumper cables that connect to your car battery as well as another set with stripped ends that you can easily solder a EC3 connector. You need to connect the balance connector to the circuit board and the EC3 to the stripped cable. I ended up purchasing a more advanced balanced parallel charging board circuit board from HobbyKing for $6 and that allowed me connect my EC3 batteries directly to the X1. Here is the link for the part - http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=24475 The charger comes with a balance connector circuit board (external) that will take your 3S balance cable. The charger also comes with a set of jumper cables that connect to your car battery as well as another set with stripped ends that you can easily solder a EC3 connector. You need to connect the balance connector to the circuit board and the EC3 to the stripped cable. I ended up purchasing a more advanced balanced parallel charging board circuit board from HobbyKing for $6 and that allowed me connect my EC3 batteries directly to the X1. Here is the link for the part -... » Read More The charger comes with a balance connector circuit board (external) that will take your 3S balance cable. The charger also comes with a set of jumper cables that connect to your car battery as well as another set with stripped ends that you can easily solder a EC3 connector. You need to connect the balance connector to the circuit board and the EC3 to the stripped cable. I ended up purchasing a more advanced balanced parallel charging board circuit board from HobbyKing for $6 and that allowed me connect my EC3 batteries directly to the X1. Here is the link for the part - http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=24475 « Show Less |
I have an eflite 3s with ec3 connector. Does this charger have the correct adapter? | You will probably have to make an adapter. It comes with Deans connectors and another empty set for your own connectors. |
I have an eflite 3s with ec3 connector. Does this charger have the correct adapter? | No it does not come with that connector. You would have to buy or make your own. |
Are Nano brick base plates compatible with Duplo blocks? | i am not posstive but i would say no. they are very small. maybe 2"-3". as i recall duplo are larger than lego. nano 8 pin are only about an inch long or so. |
Do you automatically adjust shipping costs if purchasing 2 sets? Or do we need to contact you in advance before purchasing? | Yes, shipping should be adjusted by Amazon. However, if it is not then please feel free to call us anytime at 1-866-960-6636 |
what is the max number of panels that this controler can handle I have 3 sets, 2 stand alone and 1 set of 3 | I have an additional thought to your answer Kurt. While it may be true that the unit auto switches from 12 to 24 volts for two batteries. If more than two batteries are involved (in 24volt configuration) Additional batteries would have to be by two and in parallell. If you start with one battery (12 volts), just keep adding in parallel. Personally I would just assume hook up one battery at a time ...charge it up fast...then hook up the next one. |
what is the max number of panels that this controler can handle I have 3 sets, 2 stand alone and 1 set of 3 | Depends on the wattage. This unit is good for 20amps. It auto switches from 12 to 24 volts so the wattage capacity will change. Remember the E=IXR rule. Voltage=Amp X Watts. Wattage divided by the voltage will give you amperage. 12volt system,,,,, 20a X 12v=240watts of solar panel ,,,,,,,,,,,24volt system,,,,20a X24V=480Watts of solar. |
Are there rubber caps I can order for the back wheel bolts? I believe it came with some, but I didn't think to keep them. | Not sure about those caps. I don't recall having any in my kit. End cap nuts like like are tough to cover but I might try a L or a HD if Kazam doesn't have anything. 😉 |
Are there rubber caps I can order for the back wheel bolts? I believe it came with some, but I didn't think to keep them. | I don't remember having caps that were meant to be kept on the bike. There were large caps that were only a part of the packaging. |
Are there rubber caps I can order for the back wheel bolts? I believe it came with some, but I didn't think to keep them. | Not sure about those caps. I don't recall having any in my kit. End cap nuts like like are tough to cover but I might try a L or a HD if Kazam doesn't have anything. � |
Would this bed be ok for my 2 Yorkies? 1 is. 2.5 lbs and the other is 5 lbs â~ºï¸â~ºï¸â~ºï¸ | Yes my 83 lb doberman fit nicely in it, with just her legs hanging over the edge - she was a very leggy dog |
Will a 12 pack of beer fit in one bag? | Yes, the old school 4x3 12'er will fit. the new style that has 2 rows of six will not. |
Will a 12 pack of beer fit in one bag? | A twelve-pack of beer probably would fit in one bag, but would unbalance the entire rig, and the bike. Unfortunately, you may have to buy your twelve-packs in pairs, one for each bag; however the total weight may exceed the rig's capacity. Have you considered a trailer for your bike for your future sparkling malt beverage purchases? |
Will a 12 pack of beer fit in one bag? | I once put 2 5 liter boxes of wine in the center bag and 1 in the side bag. They sell little 15 x 15 inch cargo nets that can be atttached in various positions to let you haul much more gear and sells for 3-4 bucks. |
Will a 12 pack of beer fit in one bag? | it depends on if your bag will include ice in it....they got great insulation used it on my run to bikefest on the island...lol enjoy |
do I need to have a filter system with it or is my pump enough | Yes, you need a filter system (either sand or the paper cartridge type)...the pump pushes the water through the filter. I have the saltwater with the sand pump...I LOVE IT... |
How many ounces of coffee does it make per time? | sorry, returned this one. the espresso tasted too watery to me. Didn't use it for coffee, just espresso shots. |
How many ounces of coffee does it make per time? | it will make a full shot at a time. It's quick to reheat for the second cup. Makes good coffee, makes one latte quick. the second latte is pretty fast too. |
How many ounces of coffee does it make per time? | There is a single and a double sized cup. The single holds the amount of coffee necessary to make one shot of espresso. Obviously, the double makes two. Oz. wise - that depends on if you like a higher or lower concentration of coffee when you make espresso. |
How many ounces of coffee does it make per time? | It is a little hard to tell. It doesn't have a cutoff switch so it can run until it runs out of water in the tank. Practically, I fill the coffee holder and make about 8 OZ. of good strong coffee or 2/3 of a mug. |
How many ounces of coffee does it make per time? | I make two cappuccino cups per coffee replacement in the gizmo. This ensures a frothy rich coffee taste. This is my second unit, one at each home, and they both work perfectly. |
How many ounces of coffee does it make per time? | We eventually had to just get a credit with the shipper because our unit didn't work out of the box. |
will this item fit my 08 sequoia...it's an sr5 that doesn't have nav or backup cam...also, does this come with backup camera? | If it has a double din radio then it should fit. It's camera compatable but doesn't come with one. |
will this item fit my 08 sequoia...it's an sr5 that doesn't have nav or backup cam...also, does this come with backup camera? | This fits double din radio spaces. back up camera sold separately. I really enjoy the options this unit has. This would be my first choice in Navigation Stereos. I tried Alpine and it did not have half of the options this one does and at a cheaper price. |
Excuse me, but what is this device? Can someone give quick explanation? Thanks, Alexander | This device is an upconverter, which will take radio signals in AM broadcast through upper HF bands, and output them shifted up by 125MHz. This is a useful thing for those using RTL based software defined receivers, since they don't cover the medium wave and shortwave HF bands. |
is the air hockey goal under the edge of the table, a little open spot where it slides inside? like the coin machines have? | Yes. It goes into the table just like a coin operated machine. We love the table! |
is the air hockey goal under the edge of the table, a little open spot where it slides inside? like the coin machines have? | Yes there is a little slot that is open on the very end. It slides in and then falls into the hole where you stick your hand in to get it. |
is the air hockey goal under the edge of the table, a little open spot where it slides inside? like the coin machines have? | Yes, there is a little slot under the edge of the table where the puck goes. It then drops down into a little compartment on the side where you can grab it. |
is the air hockey goal under the edge of the table, a little open spot where it slides inside? like the coin machines have? | The position of the pocket for the air hockey goal is the same as a full size table would have only the goal is an appropriate size for the this smaller table. |
does this fit smaller pots? | yes..it sort of squishes into any size pot..very very convenient! super stable and easy to use.. |
does this fit smaller pots? | The pot has to be large enough that you can fold the handles over on the inside and still have the lid fit securely, otherwise the steam will escape. I would not use it in anything smaller than 2 quarts for that reason. |
does this fit smaller pots? | It is very pliable and can be squeezed into smaller pots. I use it to steam a small lunch portion of dumplings to good advantage. They don't stick! |
what is the flying time? | Flyingtime is ZERO this piece of junk never left the ground, never turned a blade. Do NOT PURCHASE THIS ITEM |
what is the flying time? | I would say it is 10 minutes or so. My son loved it. He really thought the missiles were cool! |
I understand that the speakers are underneath. Can anyone tell me how does the speaker sound when the laptop is on a level surface, like on a table? | The speakers sound just fine on a table. But on a mattress or a pillow or something like that, the sound will be muffled, not to talk about the damage the heat from the fan does. Use a plain hard level surface and you'll be fine. |
I understand that the speakers are underneath. Can anyone tell me how does the speaker sound when the laptop is on a level surface, like on a table? | That's not true on mine atleast. I think mine are on the top in front of the screen behind the keyboard and they are loud. When playing video games my friends ask me to turn it down and the sound quality is excellent, though by the sound I would say no bass or built in woofer. If you want the full spectrum sound like someone else said you may want speakers, but for everyday use it's fine. I have noticed no difference in tabletop versus lap, etc. |
I understand that the speakers are underneath. Can anyone tell me how does the speaker sound when the laptop is on a level surface, like on a table? | The speakers sound like crap seriously. Louder on a flat surface but crappy. |
how to change the font size on the asus x102b | go to setting, then click on PC and Devices, than display and go to the bottom |
Will this kit work on a banister that is round on both top and the bottom (obviously being thinner at the top) ? Thanks in advance | No, you need an additional part that squares off the roundness of the banister. |
I have a Marlin 1894 Cowboy lever action with 24" barrel. What is the length of the longest memory flex cleaning rod or can they be joined. | My kit has three memory flex cleaning rods/ cables. They measure tip to tip: 34", 30 1/2", 8 1/8". Additionally, each cable is different in diameter, with the 8 1/8" being the heaviest guage and the 34" being the smallest guage. |
I have a Marlin 1894 Cowboy lever action with 24" barrel. What is the length of the longest memory flex cleaning rod or can they be joined. | Hi, The Otis tactical cleaning kit comes with 3 lengths rods, 8 inch, 30 inch and 34 inch. The 34 inch is for small calibers and the other 2 are for everything else. |
I have a Marlin 1894 Cowboy lever action with 24" barrel. What is the length of the longest memory flex cleaning rod or can they be joined. | It should work for you. This kit has no problem cleaning a 24" M1 rifle barrel or a 30" Mossberg shotgun barrel. No piecing together of the flex cables is necessary. |
I have a Marlin 1894 Cowboy lever action with 24" barrel. What is the length of the longest memory flex cleaning rod or can they be joined. | The two longest cables measure 30.5" and 34" respectively. Note the longest cable, for smaller calibers, has a slotted patch holder permanently attached. An adapter to attach the rods does not come with the kit. For your Marlin, the shorter of the two cables should work and it is the appropriate diameter for your rifle and appropriate size patch holders and brushes can be screwed on. |
These are marvelous. But I worry about the durability of the cables which run from iPad to amplifier and amplifier to earbuds. Anybody had problem? | No problem with mine. These cables are thin but that only means they are made of strong material, not just any old wire. |
These are marvelous. But I worry about the durability of the cables which run from iPad to amplifier and amplifier to earbuds. Anybody had problem? | No problem. Heavy enough rubber coated wire to last a very long time. Great device |
These are marvelous. But I worry about the durability of the cables which run from iPad to amplifier and amplifier to earbuds. Anybody had problem? | No issues with the cables so far--but it's only been a month. I do notice ear pressure from the earbuds given the design of the buds. |
These are marvelous. But I worry about the durability of the cables which run from iPad to amplifier and amplifier to earbuds. Anybody had problem? | No problem. Heavy enough rubber coated wire to last a very long time.Great device |
These are marvelous. But I worry about the durability of the cables which run from iPad to amplifier and amplifier to earbuds. Anybody had problem? | I have had mine just over a year now and the cord finally pulled apart at the mic, going to try and find out that Bose has for a warranty on this. Bose is usually pretty good, we shall seeUpdate Bose is awesome, still under warranty and they are going to replace them!Update 2 - Bose website gave me wrong information, its only a year warranty but I can get a replacement for a discount which comes to a total of 145 bucks. |
Will these gloves protect my fingers when I get down to the end of things I'm grating? | Sorry, I bought these for wood carving. My daughter, who is a chef recommended them to me. She cuts and uses these for all kinds of preparation. |
Will these gloves protect my fingers when I get down to the end of things I'm grating? | Yes, the only thing that they're not great protection for is pointed objects poking straight on. But they are great protection from graters and slicing type cuts. |
Can anyone recommend any other workout DVDs with similar energy and music to these? I love this program but would like to start mixing it up! | These videos are amazing! They kick your butt! But there's a Video missing that you have to buy separate |
Can anyone recommend any other workout DVDs with similar energy and music to these? I love this program but would like to start mixing it up! | Insanity to me is the best. You'll see the best results. I didn't like combat because it wasn't as "insane". |
Can anyone recommend any other workout DVDs with similar energy and music to these? I love this program but would like to start mixing it up! | I'm not sure this is what you're looking for because it doesn't have the same format of music and goofy jokes but as far as great workouts Focus T25 is awesome. I've never seen a workout have such great, body altering results...and in 25 minutes no less! It will however kick your butt. There is background music that matches the intensity of the workout but it's not music you know and can sing along to. |
Can one customize the rear dial (default shutter fine control) to affect ISO instead? Is that what changes ISO after pressing the Fn button? | You have to press the FN button (or whichever button you've set to control ISO). Then the rear wheel will control ISO and shutter half-press will lock it in. |
Can one customize the rear dial (default shutter fine control) to affect ISO instead? Is that what changes ISO after pressing the Fn button? | The FN button, function button, will change several functions but under sensitivity would control ISO |
will it work on a bushmaster ar15? | it should fit without a problem it fit my aftermarket SKS Tri Rail perfect and works on my AK |
will it work on a bushmaster ar15? | Hey brother. I'm not too sure if it will withstand the recoil of the .223/5.56. I have an MP 15-22. I returned this optic and bought the TRS 25 red dot with the UTG medium riser. It cowitnesses perfectly with the Magpul BUIS. This a great combo that's effective and very cost effective too. Spend a little extra cash if you can. Don't look to this Leapers sight. |
will it work on a bushmaster ar15? | This will fit your firearm if it has a Picatinny rail, also known as a MIL-STD-1913 rail, STANAG 2324 rail, or tactical rail, which is a bracket used on some firearms in order to provide a standardized mounting platform for accessories and attachments, similar to the Weaver rail mount. The rail comprises a series of ridges with a T-shaped cross-section interspersed with flat "spacing slots." Accessories are mounted either by sliding them on from one end or the other; by means of a Weaver mount which is clamped to the rail with bolts, thumbscrews or levers; or onto the slots between the raised sections. This will fit your firearm if it has a Picatinny rail, also known as a MIL-STD-1913 rail, STANAG 2324 rail, or tactical rail, which is a bracket used on some firearms in order to provide a standardized mounting platform for accessories and attachments, similar to the Weaver rail mount. The rail comprises a series of ridges with a T-shaped cross-section interspersed with flat "spacing slots." Accessories are mounted either by sliding them on from one end or the other; by means of a Weaver mount which is clamped to the rail with bolts, thumbscrews or levers; or onto the slots... » Read More This will fit your firearm if it has a Picatinny rail, also known as a MIL-STD-1913 rail, STANAG 2324 rail, or tactical rail, which is a bracket used on some firearms in order to provide a standardized mounting platform for accessories and attachments, similar to the Weaver rail mount. The rail comprises a series of ridges with a T-shaped cross-section interspersed with flat "spacing slots." Accessories are mounted either by sliding them on from one end or the other; by means of a Weaver mount which is clamped to the rail with bolts, thumbscrews or levers; or onto the slots between the raised sections. « Show Less |
will it work on a bushmaster ar15? | I purchased this about 6 months ago and it's operated perfectly! For my LMT AR-15 defender 2000 |
will it work on a bushmaster ar15? | Yup. Just make sure u get a mount raiser. The dot needs about a half inch to an inch raiser so u arent double sighting. |
What size hole is needed in the counter for this faucet? | Hi dear,I did not measure it but I was told by my plumber that all vessel sink faucets are standard & the hole on the vanity top should be fine (because originally I had diff. faucet installed witch I didn't like & this one was the replacement). This is a very nice faucet it is tall & the neck reaches the middle of my 18' vessel sink. I bought 5 of these for my bathrooms. Sorry for not having the exact measurement. |
What size hole is needed in the counter for this faucet? | My vanity had a two inch hole the could have been smaller for the faucet base. Might have to be that big to get the water line connectors down through it though. Looks great, works GREAT. |
is this made in china? | Yes, it is made in China. It seems to be well made and I've had no quality issues with it so far. |
is this made in china? | Hello,It says made in china in the machine so I assume yes it is made there. |
is this made in china? | I read that the units are manufactured in the same plants as Esab, Thermal Arc. The machines are very good quality and Longevity has been around for almost 10 years. I frequent their welding forum at www.freeweldingforum.com and there is always helpful advice on welding on there. Check it out. |
How long the battery will be used? | It lasted at least 25 night rides with none of them longer than 3 miles... hope that helped |
Can you turn off the auto hold feature so it constanty changes? | It changes until it senses the weight has stabilized. There are very few buttons so I highly doubt that can be done. If you are looking for a scale to measure things as you add to it, like a kitchen scale, I would not get this for that. |
Recommendation on type/speed for RAM to go along with the CPU to really get the most bang out of it? | best performance gains for the price for performance have been seen a DDR3 1600 or 1833. Of course you can always go up i have 1866 in my system same cpu. |
Recommendation on type/speed for RAM to go along with the CPU to really get the most bang out of it? | 1866 Mhz RAM at the minimum, but 2133mhz and 2400mhz give the best results if you're using the onboard graphics. Most 1866 kits are easily overclocked to 2400mhz as well, if you wish to save a few bucks. If using a discreet GPU however, RAM speed matters little. In terms of what brand to get, it doesn't really matter, though brands like Corsair's Dominator Series, G.Skill's various lines, Kingston, among others are well-known quality brands. |
Recommendation on type/speed for RAM to go along with the CPU to really get the most bang out of it? | AMD has siad that these APU's run best with dual bank memory. That means the DIMM modules have physical memory chips on both sides. If you go with Radeon memory, make sure the part number ends in "U2K". All "U1K" DIMMs are single bank. Also, several independent testers, me included, have found 2133 with a latency of 10 to be the perfect performance setting. |
Recommendation on type/speed for RAM to go along with the CPU to really get the most bang out of it? | Preferably 1600 to 2400mhz will do, your definitely going to want to overclock this APU to squeeze out it's performance. I do not recommend going over 4.1 on the overclock though. But even 1600 mhz ram can be sped up a bit to get some extra performance out of the thing. |
Before you 'bunk' them or unstack them, do they seem to be even? Like could I push them together and make it like a King? | They can definitely be pushed together, but I have no clue whether or not it would fit a king sized mattress. Do two Twin beds combine to form a King bed? |
What is the difference between this and a convection oven? | I dont know. Maybe it works on the principal as of the convection oven. Sorry not a very good answer |
Subwoofer for IM600? Does anyone know where the Altec Lansing subwoofer (SB2001) for the IM 600 can be found? | Did you ever find an alternative to the BB2001? Funny, I just bought the im600 today, and it still had the slip in it for the BB2001. I would like to buy a subwoofer for it though, so let me know :) That goes for anybody reading this, too! |
How durable is the line itself? Does it sag much if you hang a hand towel? | The line is made up of a nylon material and seems to be very durable. The unit is identical to what you would find in a hotel/motel bathroom to hang your wet items on. You shouldn't have any issues hanging a hand towel on it. We are actually using the item at our Community Center with an Allen wrench attached to it for locking/unlocking the crash bars on the exit doors. The retraction of the line itself works great since it does not snap back instantly. The retraction is slow and steady. |
How durable is the line itself? Does it sag much if you hang a hand towel? | The line is very durable. We have hangers on it all the time -- very little sagging. |
How durable is the line itself? Does it sag much if you hang a hand towel? | I have found it to be reliably durable, though I'm not using it as a clothes line. I use it to hold up my car's charging cable in my garage. |
How wide is the webbing and the buckle? | The webbing is 1 1/2 inches wide. The buckle is 2 inches high and 2 inches wide, including the little tab on the side. When you're wearing the belt with the free end threaded through the buckle, the buckle/belt stick out 3/4 inch from the waistline of the pants, mainly because the webbing is fairly stiff by casual belt standards. This is a high quality product, and I am very happy with it. |
How wide is the webbing and the buckle? | belt 1.5 inches buckle slightly larger--like a lot--if you travel you do not have to take it off--looks cool with almost any slacks or jeans |
does it work with ipod 4th generation | I don't know for sure. I have an iPod nano. I think if the input for docking is on the bottom, it should work. It comes with 3-4 adapters to hold the iPod. I loooove this. The sound is amazing and I love all of the features, including a dimmer/off option for the display. |
Is this the best battery choice for the Lenovo G560? | This battery can work with G560, but may I know the part number of your original battery for double checking? Please feel free to contact us via [email protected], we will always be here to assist you. |
Is this the best battery choice for the Lenovo G560? | I found it to be the best choice. Improved performance and great warranty/service for good price. Can be a snug fit, but no problems in months of use. |
Is this the best battery choice for the Lenovo G560? | i have g560, z560 , battery somehow not a match, i returned, this happened in 2013 |
Is this the best battery choice for the Lenovo G560? | Quality product, oem feel and performance, 18 month warranty. A heck of a value! |
will this fit a 1975 BMW R90S?? | We bought this for our Harley Road King and it looks like it's larger than the batteries recommended for the 75 BMW. |
will this fit a 1975 BMW R90S?? | -400 Cold Cranking Amps @ 0 Degree F(10 Hr Rate-Ah) 26ETX30L Dimensions: Length: 6.63" x Width: 5.19" x Height: 6.88"Weight: 21.7 lbsAbove are the batteries size and CCA.......Your bike came with a wet cell battery but guys are using various AGM batteries in the older bikes the dimensions should help you bee 100% sure it will fit |
will this fit a 1975 BMW R90S?? | Based off of the information you have provided, we show that the ETX-30L is one of the correct aftermarket replacement batteries. |
Anyone know if this one or the 001-0116-170 covers fit the Squier Vintage SS Modified Jaguar Bass? | No, it will only fit a Squire Jazz bass with a bit of tweeking. You should look to find one that fits the Jaguar bass and tweek that to fit your Squire.You have to remember: The Squire guitars are not always the same size as the Fenders, there has to be something different between them. |
Anyone know if this one or the 001-0116-170 covers fit the Squier Vintage SS Modified Jaguar Bass? | It will overlap yar pickguard. but just a lil bit.. I wouldn't recommend putting this on a jaguar bass.. |
Can I use the ethernet connection from my laptop instead of using a dedicated hub or modem to connect to the first power line device? | In a word, NO. It has to be connected to a router that assigns internal IP addresses. That would be either your cable/DSL 'modem' or to something like an Apple Airport that has an ethernet jack. |
I don't understand what means the SOY HYDRA COMPLEX INFUSED CERAMIC PLATES, if anyone knows, can you explain me that please? | When the hair is in contact with the plates of the flat iron the soy infusion applied to them is suppose to protect the hair from heat damage |
can i print from my android phone and kindle tablet? | I've used the device to print from iPhone, Galaxy S3 and Xoom tablet; however, I'm uncertain about Kindle. |
i need too know if you can put a ddr 3 i want the truth plz my friend has this and he can put a ddr3 in this computer why are you not telling me the | You cannot add DDR3 memory on a motherboard which supports DDR2 memory. DDR3 memory won't fit on DDR2 socket/slot which this model has. Please check specs below from official HP website: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c00798873-36%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&sp4ts.oid=3232028&ac.admitted=1386605803142.876444892.492883150 |
Subsets and Splits
No saved queries yet
Save your SQL queries to embed, download, and access them later. Queries will appear here once saved.