query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Do the screen sides of the trailer fold down | No , they don't but that helps the pet to not jump out. Back and front flap fold up. |
Do the screen sides of the trailer fold down | No they don't. But Maddie and I both love her Booyah ;-). She is 80 pounds and there is no where we cannot go - I am surprised at how easy it is to push her. We walk the trails in the woods, and she rolls right over tree roots, even small logs ;-). The big wheels, spring shocks and the hand break are great features. |
How stretch is the fabric? don't want it loose because I want it for swim laps but neither too tight it'll be uncomfortable I'm short but wear 38B bra | I wore it under my we suite since it is sleeveless. It helped keep my arms warm and it held its shape so far. I've used it three times and it was put in the dryer twice. |
How stretch is the fabric? don't want it loose because I want it for swim laps but neither too tight it'll be uncomfortable I'm short but wear 38B bra | I'm told by my wife the material does stretch. She is smaller bra size, but told me that you should be good to go. |
How stretch is the fabric? don't want it loose because I want it for swim laps but neither too tight it'll be uncomfortable I'm short but wear 38B bra | In my opinon they run a little small. Get a mens or the next size up in a womens size. |
How stretch is the fabric? don't want it loose because I want it for swim laps but neither too tight it'll be uncomfortable I'm short but wear 38B bra | I wear a 36D bra and bought a size large. It was tight but not uncomfortable. The fabric is not loose at all. It's bathing suit material. |
I am not able to span (raid 0) two 4tb hdds with this unit. is it impossible? what am i doing wrong? | Install your drives top down. You may have to format them. See pages 16 thru 29 for the various flavors of windows. Power on the device. press the RAID button, on the back of the box for three seconds until the led flashes. Press it again, select the raid mode you want (the first light of the series on the front of the box ) press THE CONFIRM BUTTTON ON THE REAR PANEL OF THE BOX until the box powers down. Power the device on again and the raid mode is setup. (Read the instructions page 6 and refer to page 1 "OVERVIEW" for the front panel light/button descriptions. If this doesn't work let me know. I have for 4ea 1tb drives configured as raid 10 (Mirrored pairs). But only one drive letter on my computer. Install your drives top down. You may have to format them. See pages 16 thru 29 for the various flavors of windows. Power on the device. press the RAID button, on the back of the box for three seconds until the led flashes. Press it again, select the raid mode you want (the first light of the series on the front of the box ) press THE CONFIRM BUTTTON ON THE REAR PANEL OF THE BOX until the box powers down. Power the device on again and the raid mode is setup. (Read the instructions page 6 and refer to page 1 "OVERVIEW" for the front panel light/button descriptions. If this doesn't... » Read More Install your drives top down. You may have to format them. See pages 16 thru 29 for the various flavors of windows. Power on the device. press the RAID button, on the back of the box for three seconds until the led flashes. Press it again, select the raid mode you want (the first light of the series on the front of the box ) press THE CONFIRM BUTTTON ON THE REAR PANEL OF THE BOX until the box powers down. Power the device on again and the raid mode is setup. (Read the instructions page 6 and refer to page 1 "OVERVIEW" for the front panel light/button descriptions. If this doesn't work let me know. I have for 4ea 1tb drives configured as raid 10 (Mirrored pairs). But only one drive letter on my computer. « Show Less |
I am not able to span (raid 0) two 4tb hdds with this unit. is it impossible? what am i doing wrong? | Should not be a problem. upon powering up, push the raid button to your desired array, then hold the button in the back until it re-boots. |
I am not able to span (raid 0) two 4tb hdds with this unit. is it impossible? what am i doing wrong? | Make sure that you are confirming your choice of RAID setup with the RAID button located on the back of the unit. From the user manual:First install the HDD from up to down in the enclosure. Power on device. Press RAID button for 3 seconds until LED flashes. Press it again, select the RAID mode you want to use and press the RAID Mode Confirmation Button on the rear panel until the device shuts down. Power the device on again. RAID mode setup is now complete. |
How much do i need for a 1/2 acrer yard? | I'd say anywhere from 4-8 pounds. keep in mind though, it doesn't need to be sown very densely. However, if you want a lot of green the first season, you determine the thickness of the seed to be dispersed. Also something else to consider is that any left-overs can be used in subsequent sowing seasons to re-seed, to either replace lost sod, or to thicken it all over. So you can never really have too much on hand. It keeps for years in moisture proof containers, so you'll have no spoilage from year to year either. Hope this helps to get you started. |
How much do i need for a 1/2 acrer yard? | I would not buy it as I could not get it to grow, tried it 3 different years and could not even get a blade to come up!!! |
How much do i need for a 1/2 acrer yard? | William, I'll have to be honest with you. I was totally disappointed with Canada Green Grass. I seeded my 1/2 acre with 36 pounds and got nothing!! Go to your local truf store and ask about seeds for your area. |
How much do i need for a 1/2 acrer yard? | Don't know but this product DIDN'T work for me. I followed the instructions and still have the same dirt lawn before i tried this product. |
Is this product compatible with my Samsung ATIV Book 9 Plus | I don't know about the ATIV Book Pro but I know it works with the 500 and the 700. |
Can it receive analog signals? | As far as I know there are no analog signals at least in the United States from what I understand, so I do not know if it ell receive analog |
Can it receive analog signals? | What is analog? Lol Welcome to digital era. All TV broadcast is digital. You need s good antenna like this and a post 2000 era TV or an after market TV tuner |
Can it receive analog signals? | I think it will get both analog and digital, however we only have digital signals here so I can't be certain. |
Can it receive analog signals? | I suppose it could. However, there are no analog TV signals broadcast within the frequency range the antenna is designed for (UHF). A better choice would be an antenna designed for VHF. |
what temperature is this light? Is it for vegetative or fruit/flowering state? I am looking for 6500k | Light is 6400k. I used it for black pearl peppers and it was fabulous! Hope this is what you were asking. Don |
what temperature is this light? Is it for vegetative or fruit/flowering state? I am looking for 6500k | I never checked. I have it for herb plants and they are very happy. It is on the warmer side |
what temperature is this light? Is it for vegetative or fruit/flowering state? I am looking for 6500k | For 6500K i just purchased From Triangle Bulbs and im really happy with them Triangle Bulbs T30045-10-VA (10 pack) - F14T5/865 14-Watt Straight T5 Fluorescent Tube Light Bulb, Daylight, 10 Pack |
what temperature is this light? Is it for vegetative or fruit/flowering state? I am looking for 6500k | My unit came with an Agrobrite 6400 K color temp T5 lamp. You can put in what ever you want. T5 bulbs are available in a variety of color temperatures. |
what temperature is this light? Is it for vegetative or fruit/flowering state? I am looking for 6500k | 2000k lower blue spectrum... if you are looking for the warm bulbs (red spectrum), I believe you have to look for 3000k (lumens I think you are looking for). They cost more than the regular ones this comes with. Just no matter what, always make sure proper wattage. Not worth risking fire. |
what temperature is this light? Is it for vegetative or fruit/flowering state? I am looking for 6500k | I don't know about that...I don't think it would work, I use mine for air plants & they are thriving. |
Is this item made in the USA or China or otherwise? | Engraved on the back of the tool is 'China'. This is a very nice quality tool. |
Is this item made in the USA or China or otherwise? | not sure but it started rusting with in weeks of getting it in my tool box along with other tools i've had for many years. I took it out and none of my other tools have any rust on them. |
Does this pad add any bulk to the sides of the mattress when it is on with a sheet? | Not really - its quite thin and fits well, I've never had any issues getting a sheet over it (I don't even notice its on there) - I think its well worth the money, its very high quality |
Does this pad add any bulk to the sides of the mattress when it is on with a sheet? | The pad fits snuggly and doesn't add bulk. The sides of the pad are thinner fabric than the waterproof top. We have no trouble putting sheets on. It's a great pad, washes well and is durable. We did a lot of research and we're glad we decided to buy this one. |
Does this pad add any bulk to the sides of the mattress when it is on with a sheet? | No extra bulk on the sides than a fitted sheet. The top is a little thicker but doesn't prevent normal crib sheets from fitting. |
Would these look too cheap on a wedding invitation? | I do not think they look cheap, I have used them also and for the reception at a wedding, weddings are very expensive and these were used at my daughters wedding and they looked very good. |
I'm trying to find a sim that works with this. I see the Straight Talk sim at their website. Will that work. | http://socialcompare.com/en/comparison/sim-card-format-and-size-comparisonyou just need a "Mini-SIM" Size and it works with any GSM networks |
I'm trying to find a sim that works with this. I see the Straight Talk sim at their website. Will that work. | http://socialcompare.com/en/comparison/sim-card-format-and-size-comparison you just need a "Mini-SIM" Size and it works with any GSM networks |
What are the actual height and width? | I am not sure of the size but they covered my blackberry bushes and they cover an area of about six feet long and six feet high. I really like them and plan to order more for my fruit trees. |
Can anyone recommend a good wall-mount for these speakers? They are not going to be able to sit on something in my new place. | They recommend brackets by SanuD or OmniMount. Two threaded holes in back and one on the bottom. Good luck! |
Can anyone recommend a good wall-mount for these speakers? They are not going to be able to sit on something in my new place. | I have the larger 8" version of the. I simply used the "u" shaped bracket that the manufacturer offers and attached with anchors that are appropriate for the wall you are hanging them on. I hung mine on brick in a horizontal position (speakers side by side instead of one above the other). |
Does this bow com with real horse hair or a synthetic hair? | It is real hair. It is a medium quality bow. We have been pleased by the value for the price. |
Does this bow com with real horse hair or a synthetic hair? | The description and the details and features section states that it is genuine unbleached horse hair. |
We have a 2012 Jeep Patriot and I'm wondering if the angle of this seat will work for rear facing? | We have it rear facing in a 4-door wrangler. Its not terribly comfortable sitting in the seat in front but for short rides its not a problem. |
We have a 2012 Jeep Patriot and I'm wondering if the angle of this seat will work for rear facing? | YES, we did it with our Patriot Latitude and I have a friend whose baby is RF in a 2010 Patriot. It is a tight fit, but I can get a super tight latch in any position in the back seat, including three across (as long as you use two radians the third seat can be a bit bigger) and either FF or RF. The front seat will not be able to go all the way back, but as long as you are not super tall it will be fine. I am 5'8" and had no problems. LOVE my radians. |
How do you put the black piece back on | I didn't even try looks like the piece is broken after that I ended up giving this case to someone else and she just glued it together after putting her phone in |
Compatible with I3 Inter processor? | Sorry I cannot help you. My son is my computer wizard and told me what to purchase. |
Compatible with I3 Inter processor? | Hi Mirna: The best place to find processor compatibility is on the Intel website. Enter the motherboard model : DH87RL in the search. Go to the link for: Intel Desktop Board DH87RL. You will see a link for Compatible processors in the "More Information" box. Follow this link to look up compatible I3 processors This will show you without a doubt which I3 to order. Hope this helps as I always verify processors and memory modules are compatible with the Intel motherboard. Enjoy the weekend! Jack |
Compatible with I3 Inter processor? | Hi Mirna:The best place to find processor compatibility is on the Intel website.Enter the motherboard model : DH87RL in the search. Go to the link for:Intel® Desktop Board DH87RL. You will see a link for Compatible processors in the "More Information" box.Follow this link to look up compatible I3 processorsThis will show you without a doubt which I3 to order.Hope this helps as I always verify processors and memory modules are compatible with the Intel motherboard.Enjoy the weekend!Jack |
Has anyone tried to machine wash their vest? Label indicates dry clean only. | Haven't put mine in the wash yet, but it looks to be sturdy construction. I'm going to give it a shot on gentle cycle and see what happens. Sorry I couldn't be of more help. |
what does this taste like? | It's pretty tasteless, actually. But the texture is like flour, so keep that in mind. |
what does this taste like? | Absolutely no taste. I just dump the scoop straight onto my tongue and then rinse it down with some water. |
Does the canopy stay in place when you lower the car seat carry handle? | I never tried so I'm not sure if it would stay or if the cover would slide off of one end once the handle was lowered, but being attached to the handle is what keeps the cover off the baby's face so I'm not sure you'd want the handle lowered. |
Dumb question but does international version come with charger adapter for US plugs? This is a dumb question, but if I buy an international version of the Note, will the charger have the kind of plug that they use in Europe (220V) and if so, do most sellers include an adapter to US voltage (110V)? Dumb question but does international version come with charger adapter for US plugs? This is a dumb question, but if I buy an international version of the Note, will the charger have the kind of... » Read More Dumb question but does international version come with charger adapter for US plugs? This is a dumb question, but if I buy an international version of the Note, will the charger have the kind of plug that they use in Europe (220V) and if so, do most sellers include an adapter to US voltage (110V)? « Show Less | i live in germany (temp) and was wondering can i buy this, use it germany and then use it in the states when i go back next year? |
Dumb question but does international version come with charger adapter for US plugs? This is a dumb question, but if I buy an international version of the Note, will the charger have the kind of plug that they use in Europe (220V) and if so, do most sellers include an adapter to US voltage (110V)? Dumb question but does international version come with charger adapter for US plugs? This is a dumb question, but if I buy an international version of the Note, will the charger have the kind of... » Read More Dumb question but does international version come with charger adapter for US plugs? This is a dumb question, but if I buy an international version of the Note, will the charger have the kind of plug that they use in Europe (220V) and if so, do most sellers include an adapter to US voltage (110V)? « Show Less | I'm wondering the same thing, but in reverse. Since this is sold through Amazon US, will it be ready for 110 volts or 220? Someone told me that they should be set to "autovoltage" and that way I could just buy the adapter I need for the plug, but that isn't specified here.Thanks |
Dumb question but does international version come with charger adapter for US plugs? This is a dumb question, but if I buy an international version of the Note, will the charger have the kind of plug that they use in Europe (220V) and if so, do most sellers include an adapter to US voltage (110V)? Dumb question but does international version come with charger adapter for US plugs? This is a dumb question, but if I buy an international version of the Note, will the charger have the kind of... » Read More Dumb question but does international version come with charger adapter for US plugs? This is a dumb question, but if I buy an international version of the Note, will the charger have the kind of plug that they use in Europe (220V) and if so, do most sellers include an adapter to US voltage (110V)? « Show Less | Hi! No, not a dumb question. I just ordered my international Note a little over a week ago. There was a US adapter included in the Samsung G-Note factory-sealed box. It's worked fine and I've charged the battery, no problems at all. Hope this helps. |
i recieved item but i don't see how you can hang it on the inside of a tank. It did not come with anything to hang in with. Is that item separate? | This goes on the outside of the tank... you hook it on the back you will like the filter it works aresome and is very quiet |
i recieved item but i don't see how you can hang it on the inside of a tank. It did not come with anything to hang in with. Is that item separate? | It hangs on the back of the tank on the rim. The only part that is inside the tank is the uptake tube w/ motor. The large "square" part is outside the tank.There is a leveling "dial" on the bottom of the box, so that the filter is straight up-and-down with the tank. These are wonderful filters that do the job and run very quiet! |
What is the rise on these pants? They look low on the model. | These pants are great. They sit at the waist and they have an elastic waist band. They run a little long. I'm 5'3" and had to hem them an inch. I'm also 63yrs. old so I understand about low rise pants and don't wear them myself. Hope this helped! Zumba on!!! |
What is the rise on these pants? They look low on the model. | If this makes sense, they are fine when you are upright, but they reveal to much when you do any bending or exercising. |
What is the rise on these pants? They look low on the model. | I think the rise is pretty average. At least, it they fit me that way. I do have a somewhat higher rise than average, though. |
What is the rise on these pants? They look low on the model. | I think they fit the waist ok not exceptionally low. Make sure you buy a size smaller though. I found they run big. |
Is the bumper flat black or glossy? | Flat black maybe with a light gloss. We put 2 more coats of paint on it to make sure it lasts! Our truck is 15 years old and was to the point where even the frame had rusted through in a couple of places. We cleared the rust and painted and it's good for another 15! |
Why is this called a "convertible" laptop? | Hello David, The Envy X2 is called a convertible laptop because it can be used as either a tablet, or a laptop. The screen portion can be completely disconnected from the keyboard portion, and you then use it as you would any touch enabled tablet. You are able to disconnect the screen from the keyboard at any time, as the processor, memory, and hard drive are all in the screen portion. |
CMM1200 Charger: Any idea where I can get a new charger? | I solved the problem!!! Apparently the charger can be plugged into the mower upside down. Try flipping the plug and plugging it in again. Here is the explanation on the Black and Decker website: http://support.blackanddecker.com/app/answers/detail/a_id/5182/~/plugging-in-cmm1200-charger |
Does this flat iron have floating plates? | Like removeable plates? No, it doesn't. But the "comb" is in a channel and can be removed to be cleaned or not used. |
how do I measure ? from the bar it is 24" or do I include the ends too? | The rod itself is 24" long. However, once you slide it into each end that supports the rod, it will measure about 23 1/4". They are never exactly 24" when mounted. |
What would a size 8 be? Medium? | Hi I purchased a medium for my daughter she is 11 but very small so she where's about 8-9 pants and 10 shirt. The jacket is a little large but I wanted it that way as the sleeves are banded so you can pull them in. As I want her to get a bit of wear out of it. I would say the jacket would be more a 10 fitting. If your child is an 8 are they big or small? Do you want growing room? I love the jacket it was just what I wanted, I purchased the Large for my son and he wears a 12 pant and 12-14 shirt the jacket also has just enough growing room. I hope I have helped you with your sizing😊 |
When ordering the 6000grit how many belts do you get? Is it $9.99 for just one? or do you get more? | You get (6) belts and I usually get 2 boxes, they hold up pretty good, and will really finish your knife like a razor ! |
When ordering the 6000grit how many belts do you get? Is it $9.99 for just one? or do you get more? | It states in the Product DescriptionStyle: FineIncludes 6, 6000 Fine Grit Belts. For knife honing. This is a good kit, as the 6000 grit belt does give the finest hone, but it wears out sooner than the rougher ones. 6 belts will last a while. |
my samsung trac fone is an older one with the small usb will this one work? | This plug (the part that plugs into the phone) is almost 1/2". I think the smaller plugs are about 1/4 ". Measure and see. |
my samsung trac fone is an older one with the small usb will this one work? | This plug (the part that plugs into the phone) is almost 1/2". I think the smaller plugs are about 1/4 ".Measure and see. |
It looks like it has 4 RCA inputs (two red, two white), right? Do you connect each channel of a stereo source to two input RCA's? | You can connect your stereo to two RCA's (1 red and 1 white). You would still have one set up RCA's to connect to another device. You could have 3 devices hooked up to this amp. One on the mini jack and 2 on the RCA inputs. |
any hints on how to get the easel in place? I am having a very difficult time getting the easel fit inside the holes even though I am putting in the long end first. It doesn't seem wide enough to push in the short end. Help any hints on how to get the easel in place? I am having a very difficult time getting the easel fit inside the holes even though I am putting in the long end first. It doesn't seem wide... » Read More any hints on how to get the easel in place? I am having a very difficult time getting the easel fit inside the holes even though I am putting in the long end first. It doesn't seem wide enough to push in the short end. Help « Show Less | I completely agree! I'm having the same problem. The desk seems to be somewhat concave so I thought that might be a problem (faulty/defective). It does seem impossible. My husband is procrastinating on putting the easel on so I'll see what I can do. |
any hints on how to get the easel in place? I am having a very difficult time getting the easel fit inside the holes even though I am putting in the long end first. It doesn't seem wide enough to push in the short end. Help any hints on how to get the easel in place? I am having a very difficult time getting the easel fit inside the holes even though I am putting in the long end first. It doesn't seem wide... » Read More any hints on how to get the easel in place? I am having a very difficult time getting the easel fit inside the holes even though I am putting in the long end first. It doesn't seem wide enough to push in the short end. Help « Show Less | I think I remember my husband having to push it really hard but it was last year so I don't really remember, sorry |
Do you override the automatic settings when you hit the manual on/off button? | Unit will remain on until you push manual off again at which time it will go back to the automatic setting no matter what time of day. There is a slight delay when you use the manual button. |
Do you override the automatic settings when you hit the manual on/off button? | Yes, but the settings remain until you switch back to auto. they are not erased. |
Do you override the automatic settings when you hit the manual on/off button? | Yes, you do but for that one time only. The following day the program will activate as normal again. The switch is either in Auto or Random. |
How do I know when the carbinator is almost empty? I'd hate to run out on a holiday weekend. | It is pretty easy to tell when the cylinder is running out. When the cylinder is new, the bottle pressurizes very quickly. Once it gets low, it takes much longer to pressurize the bottle. We usually get 5-6 months out of one cylinder when we are using about one bottle per day. We bought a spare cylinder to have on hand in case we ran out, but it's so easy to tell when the cylinder is getting low on its charge that we've never needed it as an emergency backup, but it is nice to have it ready to go. Our Staple exchanges the cylinders for $14.99, so it's been easy and convenient (and cheap!) to have a Sodastream. It is pretty easy to tell when the cylinder is running out. When the cylinder is new, the bottle pressurizes very quickly. Once it gets low, it takes much longer to pressurize the bottle. We usually get 5-6 months out of one cylinder when we are using about one bottle per day. We bought a spare cylinder to have on hand in case we ran out, but it's so easy to tell when the cylinder is getting low on its charge that we've never needed it as an emergency backup, but it is nice to have it ready to go. Our Staple exchanges the cylinders for $14.99, so it's been easy and convenient (and cheap!)... » Read More It is pretty easy to tell when the cylinder is running out. When the cylinder is new, the bottle pressurizes very quickly. Once it gets low, it takes much longer to pressurize the bottle. We usually get 5-6 months out of one cylinder when we are using about one bottle per day. We bought a spare cylinder to have on hand in case we ran out, but it's so easy to tell when the cylinder is getting low on its charge that we've never needed it as an emergency backup, but it is nice to have it ready to go. Our Staple exchanges the cylinders for $14.99, so it's been easy and convenient (and cheap!) to have a Sodastream. « Show Less |
How do I know when the carbinator is almost empty? I'd hate to run out on a holiday weekend. | You can tell by how many bursts it takes to carbonate the water to where the unit "buzzes" - by the last litre or 2, you can tell how much weaker the air flow is. I drink a lot of fizzy water, so I keep a spare around all the time, too. |
How do I know when the carbinator is almost empty? I'd hate to run out on a holiday weekend. | With this unit there si no Way to know it. One way is count the litters expensed or buy the one that has that feature |
How do I know when the carbinator is almost empty? I'd hate to run out on a holiday weekend. | You can kind of tell that a canister is running low on CO2 as it doesn't "whistle" as much. Since we drink carbonated water an awful lot, I bought an extra canister so that I always have a full one on hand should one run out. |
How do I know when the carbinator is almost empty? I'd hate to run out on a holiday weekend. | There really is no way to tell. I would suggest buying an extra carbonator so you always have an extra full one on hand. |
What number recycle code are these? | Sorry the only thing that I could find on the bottom of the tea set is as follows: Dantoy-9500 Hobro-Denmark, C E , (then totally by its self the number) 3 . However thethe 3 does not have the recycle symbol around it. Hope this helps! |
What number recycle code are these? | Dantoy toys are marked CE to show consumers that they meet certain safety, health and environmental requirements. These requirements are common to all members of the EU. The CE mark is the manufacturer's declaration that the toy meets statutory requirements, and the mark is common to all members of the European Economic Area. They can be recycled. The materials used in their production can be shredded and reused several times. Dantoy manufactures in Denmark. Bisphenol A is not used in their toys. Their toys are mainly made from polyethylene (PE) and polypropylene (PP). Their toys are free from phthalates (plasticisers)and PVC. Their toys are also free from fragrances. Their toys are dishwasher safe, and it is safe for your child to eat and drink from their kitchen. Only food-approved raw materials are used for their kitchenware. No substances used in dantoy's toys exceed the Candidate List limit of 0.1% (w/w). In Dantoy's production, their raw materials were examined for the presence of hazardous substances. The Candidate List is a list of chemical Substances of Very High Concern (SVHCs). The substances in this list include those that are carcinogenic, genotoxic or fertility impairing. Other chemical substances on the Candidate List include those that are persistent and accumulate in living tissue. Chemical substances which are considered just as problematic as those mentioned above, such as hormone disruptive substances, may also be included in the Candidate List. These toys meet EN71, which is a European standard that applies to children's toys as any article or material which is fully or partially designed or intended for use in play up to the age of 14. All dantoy toys have passed this test. |
Wish there was a picture what is a cig tube ? | A cig tube is a paper tube that has no tobacco in it. (An injector type of machine is used to insert tobacco into it.) The tubes can come filtered ,non-filtered.king and 100mm or even menthol flavor into which you inject via an injector machine, your choice of tobacco. |
Wish there was a picture what is a cig tube ? | It is like a cigarette without the tobacco. So you buy cig tube and tobacco separately and use a device to put the tobacco in the tube and then you have a cigarette. |
Wish there was a picture what is a cig tube ? | cigarette tube - that is what the tobacco goes in with the filter - where the flavor is in menthol - the paper |
Has anybody used these tires on a 2wd Slash? | Do you plan on just putting them on the back? they have another tire setup that is more of the same size as stock tires but same tread as the badlands. I have 2 Slash's and would recommend the smaller size then the badlands. And they work great too... but the badlands will work. |
Has anybody used these tires on a 2wd Slash? | Yes... and if you have the stock engine while oversized they work great for traction. If you have upgraded your motor it is nothing but wheelies... but these tires do work. May rub on the body, but after lots of use the body gets messed up anyhow |
Has anybody used these tires on a 2wd Slash? | Yes they will fit. Just two things to you need to know. First make sure you get the part #117312 or #117313 they are the tall ones, right at 5". The difference in the part # is the offset on the wheel, #117312 has a 1/2" offset and the #117313 has no offset. Also my friend just a couple of days ago put a set of the tall ones on the rear of his Slash 2x4 with on offset and the tires worked great. I'm not sure though how they will fit on the front. I also run the Bad Lands on my Stamped 4x4 and I have to say there the best that I have ever run. Hope this helps. |
Is the spout a soft spout? My three toddlers all tend to bite down on the spouts and have bitten through all the soft spouts we have tried. | It's a soft spout, but the way it is constructed it is actually quite difficult for someone to bite through the silicone and enlarge the opening. The 2 slits where the water comes out are protected by a lip that extends over them. To give you an idea, my daughter goes through other brands of silicone spouts in a couple weeks, tops, by biting on the spout and enlarging the holes. I only have one Pura Kiki spout that we've used every night for a few months now and it shows no signs of tearing yet. |
Is this fabric waterproff | The fabric is advetised as being waterproof and breathable, but It's more like water resistant. The fabric on the roof starts to break down from the UV rays of the sun in about a year and seems to have a life of about 2 years. I'm on my third cover, but that is the price that you have to pay when you want to take care of your investment. Happy camping.... |
What is the serving size? Is 700mg in one capsule or 2? | The bottle says that each capsule is 750 mg; there are 120 capsules per bottle. And it recommends to take two capsules 30 minutes before each meal; so I follow that protocol. |
What is the serving size? Is 700mg in one capsule or 2? | Im sorry but I dont recall. But this is a supplement that you have to take more than once a day and with alot of water if you want to control your appetite |
Is the Zoo Med ReptiCare Deluxe Rock Heater any good? I mean, specifically, can you rely on it's thermostat not to burn your pet? | I bought the rock heater without the thermostat and found it way too hot. I returned it the next day and ordered the rock heater with a thermostat instead. The temperature adjustment is worth the few extra dollars. I have mine on a low setting. You will notice it takes a while to warm up as the rock material is quite thick. |
Is the Zoo Med ReptiCare Deluxe Rock Heater any good? I mean, specifically, can you rely on it's thermostat not to burn your pet? | yes, ive had mine for about a year now and the temperature control works great, just make sure you give it time to warm all the way up and test it before you put it in. |
Is the Zoo Med ReptiCare Deluxe Rock Heater any good? I mean, specifically, can you rely on it's thermostat not to burn your pet? | We've had ours for about a year. The thermostat has proven reliable. We set it on a mid-range setting and our leopard geckos love it. If it is too hot, they won't sit on it. Never put the heat lamp above the rock; it will overheat the rock and harm your lizards. In the winter we keep it up a bit because our house is cool. Just check it with your hand. The instructions are thorough in their explanation. Yes, we've been very happy with the rock! |
i am 5'8, 155 lbs, 38C, 40 in hips, 36 waist, I am very confused should I get 38 or 40? Any opinions? | the one I bought my daughter seemed to run a little small/tight..after a couple of washes.. Maybe go with the 40. |
Are they all metallic? Or when you put them on do some of them look less metallic? | They aren't all metallic. Only the ones that look metallic in the photos I would say. I have the big set that has the bright colors in it - so I love the peach/pink, peacock blue, ..there are a lot of greens that I gave away but if you like green you'll be set. The dark purple is amazing too. AA few have glitter pieces in them. Don't loose the sharpener, they are hard to sharpen even with it and without it you're lost hahah. Hope that helps. |
Are they all metallic? Or when you put them on do some of them look less metallic? | They are NOT all metallic which is great for softening/blending the 'too shimmery' look. Make sure to keep them in a cool dry place. I bought mine during summer and many of them partly melted and broke because of the heat sitting in the mailbox. |
Are they all metallic? Or when you put them on do some of them look less metallic? | They are matte and shimmer. Depends on color. Good primer they don't crease. |
Are they all metallic? Or when you put them on do some of them look less metallic? | Honestly, it really depends on the undertone of your skin. There are some metallic colors in this pack but they show up differently on everyone. On me some are bolder than others. I have medium - deep skin with a gold undertone. The green, gold and silverfish colors all seem to look whiteish/silvery on me. |
Are they all metallic? Or when you put them on do some of them look less metallic? | some of them are a little more subtle than metallic, some are metallic and some are glittery as well. You can't tell until you look closely at the crayon part and see bits of glitter in them. SO you have a good mix. |
How can you use it if there are no buttons and you lose the remote? | There is a button located beneath the screen above the pedestal. To increase volume you slide it right and left. For further options you press and a menu is available to turn off tv you must press and choose the button indicated for power. |
How can you use it if there are no buttons and you lose the remote? | You can use the cable remote and i guess you can always buy the universal remote to make it work,There is a button under the tv/monitor that shuts it off and does a couple of other things, hope this helps |
Subsets and Splits
No saved queries yet
Save your SQL queries to embed, download, and access them later. Queries will appear here once saved.