query
stringlengths
20
2.05k
answer
stringlengths
75
2.05k
When I use on my new 01781 canner the pressure reads 14 PSI. Is it safe to assume the guage is off by 1 psi?
I just wrote that mine was off by a pound. the instructs say to have it calibrated by local cornell cooperative but don't think they still do it (can always check in your area). If you are going for 15 pounds and it reads 14 but the regulator is jiggling, I'd assume it's fine.
When I use on my new 01781 canner the pressure reads 14 PSI. Is it safe to assume the guage is off by 1 psi?
PH, I assume that you are at an elevation wher 15 pounds is needed so to answer your question, it is yes. That is why experts advise having their pressure gauge tested every year or so. Using the weight, there is no need to be concerned if the gauge is off a bit. Although 1 psi would not be critical, the rules have always been strictly black and white with no gray area between.
When I use on my new 01781 canner the pressure reads 14 PSI. Is it safe to assume the guage is off by 1 psi?
We would like to assist you. Please contact our Customer Service Department M-F 8-4:15 CT by phone (1-800-877-0441) or e-mail ([email protected]).
When I use on my new 01781 canner the pressure reads 14 PSI. Is it safe to assume the guage is off by 1 psi?
It may be. You should follow the manufacturer instructions an have the valve checked at your local county extension office. Also I noticed the pressure valve picture shown is the model 50332 which does not come up as a replacement valve for this model. Although the same weight you should use the recommended valve for your cooker which in this case is the 09978.
Are these made in England?
Hi Esther,Yes, I looked at the bottom of mine and they are made in England. You will love the small bowls.Best regards, Katherine
Are these made in England?
Hi Esther, Yes, I looked at the bottom of mine and they are made in England. You will love the small bowls. Best regards, Katherine
The photo shows angle loc-rings but the description just says, "Millett Aluminum Rings." Are the rings being sold angle-lock rings?
no they are not.... probably have to go to millet to get them.www.millettsights.com/rings-bases/angle-loc-steel-rings jp
The photo shows angle loc-rings but the description just says, "Millett Aluminum Rings." Are the rings being sold angle-lock rings?
The Medium rings I received look just like the black ones pictured. I am not sure what the 'angle lock' feature refers to.
The photo shows angle loc-rings but the description just says, "Millett Aluminum Rings." Are the rings being sold angle-lock rings?
no they are not.... probably have to go to millet to get them. www.millettsights.com/rings-bases/angle-loc-steel-rings jp
Will this work on a sony alpha 230 camera if I were to use a canon lens?
It's for Canon FD mounts, The new ones are EF I believe. The FD lenses were discontinued in the early 90's. You also have to shoot in manual mode as autofocus will not work.
Will this work on a sony alpha 230 camera if I were to use a canon lens?
This will allow the use of a Canon FD manual focus lens on a Sony Alpha. It is NOT for the new style Canon AF lenses for the digital Canon. Also, in the menu of the Sony, the camera has to be set to fire without lens attached. This is in the custom menu listed as Release w/o lens and it must be set to enable. Make sure that you can find this option in the menu before you purchase the adapter. Not all of the Sony's have this ability and the entry level models may not. Put the mode dial on P,A,S, or M to check out the full menu.
Will this work on a sony alpha 230 camera if I were to use a canon lens?
It's for Canon FD mounts, The new ones are EF I believe. The FD lenses were discontinued in the early 90's.You also have to shoot in manual mode as autofocus will not work.
Is it a ratchet suspension ?
This particular hard hat came with an adjustable suspension but not the ratcheting kind.
Is it a ratchet suspension ?
No, I purchased three hats, they are adjustable but not the ratchet type. The ratchet linnets can be purchased separately for about $15.00.
Can I still use an on camera speedlight while triggering 2 off camera speedlights with these triggers?
Yes, you can, but you will need three Yongnuo triggers, one for the camera and one for each one of the 2 off speedligths
Can I get multiple locks keyed alike ?
For the locks to be Keyed Alike (KA) you would need the 140KA: http://www.amazon.com/gp/product/B002IV546O
I've seen a number of these corkscrews, knock offs, coming from China. Where is this one made?
I bought one new and it says "Made in China" on the back of the package, but I'm not complaining. The quality is good, the corkscrew is solidly made and the wood is great quality. I wouldn't consider this a "knock-off". It's just fine.
I've seen a number of these corkscrews, knock offs, coming from China. Where is this one made?
To be honest I can't tell. Looked all over it, not a wod scribbled that I could see. Probably is a knock off. But... I bought one for my wife for work, she loves it and two other girls liked it so much and wanted one too. So three girls are happy with it, knock off or not. At $10 or $11 bucks if say it's worth it.
Does this remote work on a sharp portable air conditioner?
Yes, turn on air conditioner and use the code for Sharp. it is three of them. Try them one at at time as the directions states. If that doesn't work, press the setup button until the red light stays on, then press 8. Next keep pressing the power button until the air conditioner shuts off. Once that happens press the number 1 to install the code.
Does this cleaner come with the refillable spray bottle?
No Debbie, it doesn't, but the spray bottles are so easy to purchase that the value of the cleaner more than makes up for it!!!! this cleaner takes the place of so many over the counter cleaners that it is surely the only one you will ever need...
Does this cleaner come with the refillable spray bottle?
Debbie, the product does not come with a spray bottle. You have to provide your own but that is very easy to do. I have the official Advantage bottle and I have a bottle that I got at Orchard Supply. They are equal!
Will this reduce the appearance of dark spots? Just finished a bottle of WattsBeauty Retinol Max 2.5%, which helped. Looking for stronger, is this it?
If you are looking for something strong I would recorecommend Dr.Song Glycolic acid peel. Its super strong and you will need to fallow the directions carefully. They have a special on it right now.
Will this reduce the appearance of dark spots? Just finished a bottle of WattsBeauty Retinol Max 2.5%, which helped. Looking for stronger, is this it?
If you are looking for something strong I would recorecommend Dr.Song Glycolic acid peel. Its super strong and you will need to fallow the directions carefully. They have a special on it right now.& yes it really helps remove stubborn dark spots.
Will this work in PS3's or PS4's? I don't want it to "Sleep" at all..
John- I can't answer your question. I do not have experience with playstation.
Will this work in PS3's or PS4's? I don't want it to "Sleep" at all..
Not sure what you mean by "Sleep" but I installed this drive in my PS3 a few months ago (my second time upgrading the HDD) and have had no problems.
Will this work in PS3's or PS4's? I don't want it to "Sleep" at all..
It should work. . . The sleep function is a property of the PlayStation, not the hard drive firmware.
Will this work in PS3's or PS4's? I don't want it to "Sleep" at all..
This is a great reliable drive to use in a ps3. I can't imagine it wouldn't work in a PS4 since it's a standard 2.5" drive. I use it to store all of my movies and watch them on the ps3. As far as loading times with games, I don't think it's any faster than the drive that came in my ps3. I highly recommend the drive. Just don't expect any speed increases with it.
Will this work in PS3's or PS4's? I don't want it to "Sleep" at all..
It works with a PS3. I put it into a the new slim version with no issues. I don't know how the PS4 is going to handle the HDD situation.. As far as it going to "sleep", I think that's an issue dealt in settings.
is there a metal support in the middle or do i need to buy another support? thanks!
No metal support in the middle, but I don't think that you need to buy one. The weight of the bed should really be resting on the legs of the bed frame that the headboard is attached to....not resting on the legs of the head board.
is there a metal support in the middle or do i need to buy another support? thanks!
There is no center support but we found IF you install properly and have the frame end supports firmly ON the floor it is quite sturdy.
Does anyone know if the kibble size is the same as the c&p organix adult?
I believe that the Puppy (I think that's what you mean by kibble) formula is just a little bit smaller, but still the adorable same heart shape.
You should also DDR2? I need a DDR and DDR2, 1GB DDR and 2GB: DDR2
Not quite certain understand your question - just be certain you order the correct memory. My HP is an older model and maxes out at 2gb - I gig in each memory slot and I checked the specs to get the correct type and clock speed. As far as operation and my satisfaction, the boards were exactly what I needed and make the computer operate quite a bit faster with NO problems. Hope this helps - - -
You should also DDR2? I need a DDR and DDR2, 1GB DDR and 2GB: DDR2
You can not use both DDR & DDR2 Memory on the same mother board. Depending on how many memory slots the board has. 2 slots can be upgraded to 1GB in each slot, 4 slots you can leave 2 empty. If your board does have slots for DDR & DDR2, I would use DDR2 because of the speed. You have to remember that the memory slots are just a bit different. The slot is in a different spot. Always get memory in pairs, unless you only have 1 slot. When in doubt you can always go online to the manufacturer of your computer or the one that made the mother board. They should be able to answer any and all questions. Hope this helps. You can not use both DDR & DDR2 Memory on the same mother board. Depending on how many memory slots the board has. 2 slots can be upgraded to 1GB in each slot, 4 slots you can leave 2 empty. If your board does have slots for DDR & DDR2, I would use DDR2 because of the speed. You have to remember that the memory slots are just a bit different. The slot is in a different spot. Always get memory in pairs, unless you only have 1 slot. When in doubt you can always go online to the manufacturer of your computer or the one that made the mother board. They should be able to answer any and all... » Read More You can not use both DDR & DDR2 Memory on the same mother board. Depending on how many memory slots the board has. 2 slots can be upgraded to 1GB in each slot, 4 slots you can leave 2 empty. If your board does have slots for DDR & DDR2, I would use DDR2 because of the speed. You have to remember that the memory slots are just a bit different. The slot is in a different spot. Always get memory in pairs, unless you only have 1 slot. When in doubt you can always go online to the manufacturer of your computer or the one that made the mother board. They should be able to answer any and all questions. Hope this helps. « Show Less
You should also DDR2? I need a DDR and DDR2, 1GB DDR and 2GB: DDR2
Depends on the machine. Google the laptop model specifications to find out your specific maximum requirements and number of card slots. Normally, you cannot use DDR and DDR2 interchangeably.
You should also DDR2? I need a DDR and DDR2, 1GB DDR and 2GB: DDR2
You will need the specifications of the computer that you looking for using google to know if your motherboard can use both type of memories but you can't use DDR and DDR2 at the same time. Or use DDR only or DDR2 only but don't mix them because the computer can't work properly.
if I'm a small female (like a size 2 or 4) is this going to fit me....do you think? None of these brands are ever shown on any women. thanks
I just went and tried it on-I'm 5'8 but the same size and it fits me. (It's easily adjustable with the velcro straps, stretchy yet firm). Not sure how broad your shoulders are, but I'd say it could work for you based on the info you provided.
if I'm a small female (like a size 2 or 4) is this going to fit me....do you think? None of these brands are ever shown on any women. thanks
It was purchased for my 15 yr old daughter who is a size 2-4 and fits perfectly. She loves how well it ices and the surface area it covers in icing. Hope this helps!
if I'm a small female (like a size 2 or 4) is this going to fit me....do you think? None of these brands are ever shown on any women. thanks
I think so. The velcro will adjust to as small as you need. Each ice pack is 5 x 10.5 inches.
When paired w/ibox, can I use this for the following 2 settings:(1) Shower only and (2) *both* shower & body-jet in ON position?
Yes, there's actually 3 settings: shower only, shower and handheld (both ON), and handheld only.
When paired w/ibox, can I use this for the following 2 settings:(1) Shower only and (2) *both* shower & body-jet in ON position?
this is a diverter. you can connect two setting like, one is shower one is spout.
When paired w/ibox, can I use this for the following 2 settings:(1) Shower only and (2) *both* shower & body-jet in ON position?
I'm not clear by what you are referring to in regards to the ibox and this valve,But this valve does not work if you want it to have both streams on. The diverter valve is just that, diverts water from one position to another therefore one is on while the other is off. You need a different set up for both to comeOn and that usually requires a separate control valve and diverter
When paired w/ibox, can I use this for the following 2 settings:(1) Shower only and (2) *both* shower & body-jet in ON position?
actually it has 3 position one for each shower and sprayer or you can use both at the same time, i hope this will help you �
When paired w/ibox, can I use this for the following 2 settings:(1) Shower only and (2) *both* shower & body-jet in ON position?
I believe you cannot... this specific model works with two settings alone. Shower only or jet only.
what does this have for output jacks for external speakers as some of the reviews "sound" isn't favorable
small headphone/earplug connector found on all portable audio players. The audio out volume is controlled by TV.I haven't tried unpowered speakers or headphones, however, I use a cheap amplified soundbar which has a similar input connector and never had to crank the volume higher that 5 (out of 30).
what does this have for output jacks for external speakers as some of the reviews "sound" isn't favorable
dosent have any just a headphone jack I cant get my dvd out theres no button look for a better tv
what does this have for output jacks for external speakers as some of the reviews "sound" isn't favorable
small headphone/earplug connector found on all portable audio players. The audio out volume is controlled by TV. I haven't tried unpowered speakers or headphones, however, I use a cheap amplified soundbar which has a similar input connector and never had to crank the volume higher that 5 (out of 30).
what does this have for output jacks for external speakers as some of the reviews "sound" isn't favorable
you can use computer speakers. But you need a power source for the speakers and will have to turn them on and off as with a computer.
what does this have for output jacks for external speakers as some of the reviews "sound" isn't favorable
I don't recall. TV lasted roughly 4 months and then died. Wouldn't suggest.
what does this have for output jacks for external speakers as some of the reviews "sound" isn't favorable
Other than an earphone jack, no. There is a audio menu you can change to sound a little.
Does the phone have 1 lines, or 2 lines (I need to be able to plug a fax in and leave it plugged in, so need a 2 line phone) Thanks.
CS6649-2 is a one line phone system. Unless you require a dedicated phone line for fax only, you do not necessarily need 2 different lines to integrate a phone and fax device.
Does the phone have 1 lines, or 2 lines (I need to be able to plug a fax in and leave it plugged in, so need a 2 line phone) Thanks.
Our phone only has one line. Perhaps there is a different model with two or more, but I am not aware of it.
Does this fit under a 2000 Accord bumper? Two holes that connect to the splash shield appear bigger in diameter than the ones that fit elsewhere.
I'd say you need the 91503-SZ5-003 clips as well. I needed both for a Honda Odyssey splash shield.
Does this fit under a 2000 Accord bumper? Two holes that connect to the splash shield appear bigger in diameter than the ones that fit elsewhere.
as far as the 2000 accord im not sure. I know 2002-2008 civics use these. I would think so. You could give it a shot. you might want to check honda forums. There are so many that you would no doubt find your answer in any of them. Good luck!
I have this u-lock locked with my bike and I can't get it out. Do you think this saw can also cut through metal?
No it is meant to cut wood. I would try a hacksaw with a metal cutting blade.
I have this u-lock locked with my bike and I can't get it out. Do you think this saw can also cut through metal?
No. This saw is designed for wood. If you want to cut through metal you should consider buying a hacksaw designed for cutting through metal.
I have this u-lock locked with my bike and I can't get it out. Do you think this saw can also cut through metal?
This saw will not cut metal. The steel its teeth are made from is not hard enough for cutting metal.
Do all Li-Ion batteries suck rocks? ONE year life on batteries for a $300 drill?
Lithium batteries should not be drained completely. Once done, it can't recover its capacity.
Does it come with a usb charger as in the picture or a wall outlet charger as in some reviews?
My light came with a wall charger that can charge two batteries. One battery was included. I found more batteries locally but you need to check the physical length of the batteries because some were too short to make proper contact inside the light and would not work. Therefore be careful purchasing batteries online. The company had the correct batteries available.
Does it come with a usb charger as in the picture or a wall outlet charger as in some reviews?
My device came with an external miniUSB charging adapter. One must remove the battery and place in the charger.
Will this fit the Nikon D5100 with the following lens: NIKKOR DX AF-S 18-55mm F3.5-5.6G
I don't know ! The Lens Hood I have on my DX AF-S 18-55 mm F3.5-5.6G is an Nikon HB-45 . Works GREAT!I CAN,T say that for all Nikon Lens Hoods ! DonC
Will this fit the Nikon D5100 with the following lens: NIKKOR DX AF-S 18-55mm F3.5-5.6G
Yes it will fit the lens that you mentioned but you have to be careful because it will not lock in place and can be knocked off quite easily.
Will this fit the Nikon D5100 with the following lens: NIKKOR DX AF-S 18-55mm F3.5-5.6G
It is designed for the 55 - 200 DX Nikor that uses a different mounting system for the hood.
Will this fit the Nikon D5100 with the following lens: NIKKOR DX AF-S 18-55mm F3.5-5.6G
I don't know ! The Lens Hood I have on my DX AF-S 18-55 mm F3.5-5.6G is an Nikon HB-45 . Works GREAT! I CAN,T say that for all Nikon Lens Hoods ! DonC
Are these for outdoor use
I would say no. I have the chair in my daughter's room for use with her vanity. It is not that sturdy of a chair and I wouldn't buy them for outside. Great looking chair.
Are these for outdoor use
I suppose one could use them outdoors, although I imagine that the chair would be prone to scratches. Personally, unless the area is a fully covered porch, I wouldn't use this chair outside. Hope that helps!
Are these for outdoor use
I have this chair. Love it! My quick answer would be "yes" but I guess if you want to be sure they don't get weathered at all, don't leave them out in the rain, etc. However, I did leave then out for several weeks, in a very hot pop-up greenhouse, where I let water from the garden hose hit them, and they probably cooked a little! They were directly on soil, too. They cleaned up pretty well with Novus cleaner number 1 (there's 1, 2, 3). I wouldn't say they stayed perfect -- something somehow left some pale cloudy splash marks here and there, and though the Novus does work, they are stubborn.I now have the chair inside again, since I don't sit out in the greenhouse with the mosquitoes very often. I have this chair. Love it! My quick answer would be "yes" but I guess if you want to be sure they don't get weathered at all, don't leave them out in the rain, etc. However, I did leave then out for several weeks, in a very hot pop-up greenhouse, where I let water from the garden hose hit them, and they probably cooked a little! They were directly on soil, too. They cleaned up pretty well with Novus cleaner number 1 (there's 1, 2, 3). I wouldn't say they stayed perfect -- something somehow left some pale cloudy splash marks here and there, and though the Novus does... » Read More I have this chair. Love it! My quick answer would be "yes" but I guess if you want to be sure they don't get weathered at all, don't leave them out in the rain, etc. However, I did leave then out for several weeks, in a very hot pop-up greenhouse, where I let water from the garden hose hit them, and they probably cooked a little! They were directly on soil, too. They cleaned up pretty well with Novus cleaner number 1 (there's 1, 2, 3). I wouldn't say they stayed perfect -- something somehow left some pale cloudy splash marks here and there, and though the Novus does work, they are stubborn.I now have the chair inside again, since I don't sit out in the greenhouse with the mosquitoes very often. « Show Less
The room I'm considering for this item is 225 sq feet. Is this room too small for the 9000?
I'm not sure about the room size. What I am sure about is the fact that the system develops wiring problems after a while. If I was you I would check out Consumer Reports magazine for a better alternative.
The room I'm considering for this item is 225 sq feet. Is this room too small for the 9000?
that does sound small, but if you don't have a lot in the room then you will get a full sound. however i recommend geting the sonos - i had too many remote issues with this. (maybe it was just me). i know its more (especially with the bass) but it is a lot better.
How do i get the fire place to light up and make the crackling sound? Also the timer on stove how do i make it work?
Push the timer down to activate it. Haven't yet figured out the fireplace yet. Seems to be broken as everything else works fine.
How do i get the fire place to light up and make the crackling sound? Also the timer on stove how do i make it work?
I could not figure that out either-- but my 8 year-old Granddaughter had no trouble finding it! I think the button is on the side of the fireplace-- not sure about the stove. Children usually know where everything is! Good luck!!
How do i get the fire place to light up and make the crackling sound? Also the timer on stove how do i make it work?
If the batteries are in, then it is just broken. That is how ours came too....the stove button worked. The fireplace should make a sound by holding down the same button the raises the TV.
Will this work with the PS Vita 2000?
yes it should...the ps vita 2000 vs the 1000 has very little differences...the front and back of the console are pretty much the same thing except the 2000 is thinner and slimmer and it has an lcd screen instead of the oled. just like how apple always comes out with new models for the ipad but the exterior pretty much looks the same as the previous model
does it have a microphone input?
Yes, there are two inputs. However I would NOT recommend buying this! The microphones stopped working w/in two months of buying it, but we could still play CD's. After about 6 months, the cd player also stopped working. Don't waste your money!
If I remove the cap will I be able to mulch and pick up leaves into my grass catcher?
With the cap removed, it will not mulch. Cap needs to be on in order to keep the clippings in the deck so they can be repeatedly cut (mulched) by the blades. The blades also work normally without the cap, so yes, they will blow the clippings into your grass catcher.
If I remove the cap will I be able to mulch and pick up leaves into my grass catcher?
There is no reason that you shouldn't be able to do that if you have the mulching blades on the mower.
If I remove the cap will I be able to mulch and pick up leaves into my grass catcher?
I agree with the previous answers. The regular blades have different bends along their length which may affect the aerodynamic lofting of the cut grass. But I doubt that the differences would be significant. Try it. Ripley: I say we take off and nuke the entire site from orbit. It's the only way to be sure.
If I remove the cap will I be able to mulch and pick up leaves into my grass catcher?
The side discharge cap is easily removable without any tools needed. There is nothing in the kit that changes anything so if your bag mounts to the side discharge now, there will not be any changes. The mulching blades may decrease the air flow slightly, but not enough to prevent the grass from blowing into the bag. In my unprofessional opinion, you should be just fine.
Would it fit in the (NEWEST VERSION) Apple MacBook Air MD761LL/A 13.3-Inch Laptop?
No, this would not fit the MacBook Air. I would recommend this leather case for the MacBook Pro 13 or 15 inch.
Would it fit in the (NEWEST VERSION) Apple MacBook Air MD761LL/A 13.3-Inch Laptop?
I think the air is to thin so the case will be to big. It is perfect for Mac book pro 13 inch
what do you do with the top part when taking a picture ? does it hang ? or do you need to hold it in your hand or put it somewhere ?
The case comes in 2 parts. The lower part is kind of permanent, unless you intentionally remove it completely. When it come to the upper part there are 2 scenarios:1- The two clippers on the sides can be opened and the top part is held by the bottom clip. Hence, the upper part is hanging. (Quick shooting)2- or it can be completely removed by unclipping the 3 clippers. Hence, it can be kept away from the camera and you will be left with the bottom part attached, half a case sort of speak.
what do you do with the top part when taking a picture ? does it hang ? or do you need to hold it in your hand or put it somewhere ?
Either works... You can remove it completely and hold it separately or you can leave it snapped and it hangs below the camera while taking your shot. Occasionally I leave it off if I'm just holding the camera by the strap (sometimes a little more convenient without it completely). Otherwise if I'm going to throw the camera in my purse and don't want it to bang around I will leave it on and just open the top when I'm ready to use.
what do you do with the top part when taking a picture ? does it hang ? or do you need to hold it in your hand or put it somewhere ?
When using the camera I usually snap it off and put in my backpack then replace it when just carrying the camera.
Can it be used with an iPad Air and Surface?
Shawn, I use mine with my iPad and my NOOK. I'm not sure what an iPad Air is, mine is a first generation iPad. My NOOK is a NOOK color.
Can it be used with an iPad Air and Surface?
I have an iPad mini and it works fine, but anything thicker might not stay on the little leather strip.
Can it be used with an iPad Air and Surface?
It works great with both the iPad Air AND the Surface. I went from an iPad Air to a Surface Pro 3 and my pillow did too, effortlessly! Just FYI, with the lower part of the pillow in the extended position, it supports the Surface Pro's write cover perfectly -- so far the ONLY lap support I've found that works for this!
Can it be used with an iPad Air and Surface?
I don't have iPad air just iPad 4, works great! Couldn't live without it!!! Love it!!!
Will this have a noticeable improvement in sound quality over the onboard VIA VT2021 codec? (specifically in regard to music)
not really, this card is really basic in my opinion, just does what it's supposed to do, but it doesn't really pack a lot of features. It has effects where it makes your sound into settings like "large hall, recording studio, small room" but that's really about it. Don't expect too much out of something that's costing you about 30 dollars. It will not have much difference from a stock onboard audio.
Do these fit Thule Aero 400 Feet? These models pre-date the 400xt Feet.
Im not sure but you can do what I did, I call thules and asked customer service all questions I had and It really helped me out big times.they will ask for year and make of vehicle and they will give you the right part number to perfectly fit your vehicle. Hope this helps !! It did for me. Thules customer service number is 1 (800) 238-2388.
Can you use the shoulder sling pad on the knee?
As long as you can fit it on the knee or lay it on there, I don't see why not. We have the universal one and we use it for everything.
Can you use the shoulder sling pad on the knee?
I don't know what the shoulder sling pad is, but the universal pad works really great on the knee.
Can you use the shoulder sling pad on the knee?
Yes. In fact that is what I used it for because it is bigger than the knee pad and provides more complete coverage.
WHen will the price go back to normal? It's about $15 too high right now, not buying until it goes back to regular price of $46.99
We sell ours for $25.21 plus shipping!! We currently have the Banana flavor in stock . We also have a wide variety of other supplements. - NuJentek
WHen will the price go back to normal? It's about $15 too high right now, not buying until it goes back to regular price of $46.99
Hi, we sell the 6 pound for $33.99, and the 12 pound for $59.99 in our Amazon store. The 6 pound is what is pictured here.
WHen will the price go back to normal? It's about $15 too high right now, not buying until it goes back to regular price of $46.99
You could sign up for paribus.co, they get you money back once prices drop on anything you buy.
Wondering about adding it to kitty litter to control odor problems??? Thanks
oh no, my dear, that would NOT be a good idea....first of all it would be so very messy and second I doubt that it would help with that particular problem...you best stick to the products that are made specifically for the kitty box....
Wondering about adding it to kitty litter to control odor problems??? Thanks
I'm not sure if it would control odor problems, but it is pure black and a very fine powder. I have several cats myself and feel they would track it on the floor when they left the box! We use it for our teeth and if you're not careful, the powder gets everywhere.
Wondering about adding it to kitty litter to control odor problems??? Thanks
There are activated charcoal products available for litter box odor control, just run a search.
Wondering about adding it to kitty litter to control odor problems??? Thanks
I would not add to kitty box because this is food grade charcoal and the kitty may want to lick this. Use baking soda as this stabilizes oder
Wondering about adding it to kitty litter to control odor problems??? Thanks
I added activated charcoal crystals (another product), and even that had so much fine powder and dust that it stained one of my cat's white paws dark gray.
Wondering about adding it to kitty litter to control odor problems??? Thanks
oh no, my dear, that would NOT be a good idea....first of all it would be so very messy and second I doubt that it would help with thatparticular problem...you best stick to the products that are made specifically for the kitty box....