query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
what are dimensions ??? i know 60 inch long but how wide an tall? | I don't recommend this product unless your grill isn't exposed to the sun. Mine faded the first year and now it looks purple so I took it off permanently for the summer. |
what are dimensions ??? i know 60 inch long but how wide an tall? | We are distribution not manufacture so the information the Vendor has provided is limited. This is the information we have available:Measurements: 60" L x 30" W x 45" H. |
what are dimensions ??? i know 60 inch long but how wide an tall? | I did not measure this puppy, but I have a four burner BBQ with side burner and it is way big enough. Almost to big.... |
Will this phone work with a straight talk sim card? | Yes, I'm using Walmart family mobile Sim card and it works. No problem at all |
Can you tell me if these are smaller than 8 mm long, or the "exact" dimensions these keys are? | I don't know but they were much smaller than they looked in the picture... :-/ |
How easy is the unit to clean? Does machine have calcium and dirt build-up after use? | So far, cleaning was a breeze. The inside surface is polished, as to prevent the calcium to stick to it. Had it for about 7 months now, and running a sponge across the surface was enough. |
How easy is the unit to clean? Does machine have calcium and dirt build-up after use? | There is no calcium or dirt build-up after use. The unit will detect low water level, when it has about 1" left, and the unit will shut itself off. Then I dump the remaining water and fill it with new. |
How easy is the unit to clean? Does machine have calcium and dirt build-up after use? | Cleanup could not be simpler. And I've yet to see ANY calcium deposits. The water sits in the bottom half (basin). To access, just lift off the top half, and gently place it aside. If the water has been sitting in the basin for a long time, just lift out the rotating wheel device in the basin, then take the basin to the kitchen sink and gently wash it with Dove detergent. Put the wheel back in the basin and fill the basin up to the line. Now, put the top half back on. Winia has designed this great machine so that the top half---which houses all the electricals---never comes in contact with water. Cleanup could not be simpler. And I've yet to see ANY calcium deposits. The water sits in the bottom half (basin). To access, just lift off the top half, and gently place it aside. If the water has been sitting in the basin for a long time, just lift out the rotating wheel device in the basin, then take the basin to the kitchen sink and gently wash it with Dove detergent. Put the wheel back in the basin and fill the basin up to the line. Now, put the top half back on. Winia has designed this great machine so that the top half---which houses all the electricals---never comes in contact with... » Read More Cleanup could not be simpler. And I've yet to see ANY calcium deposits. The water sits in the bottom half (basin). To access, just lift off the top half, and gently place it aside. If the water has been sitting in the basin for a long time, just lift out the rotating wheel device in the basin, then take the basin to the kitchen sink and gently wash it with Dove detergent. Put the wheel back in the basin and fill the basin up to the line. Now, put the top half back on. Winia has designed this great machine so that the top half---which houses all the electricals---never comes in contact with water. « Show Less |
How easy is the unit to clean? Does machine have calcium and dirt build-up after use? | I use 1cup of distill vinigar per galon, and soak it overnight once in a month or so. |
does it have a clip so it can be clipped onto clothing? | Yes, it is like a safety pin on the back..so be careful with the little ones the could get poked. |
What are the dimensions of this catcher? | Mine is about12 inches long, 5 inches wide, 3inches depth. Its a lot larger than I wanted. |
What are the dimensions of this catcher? | 13" X 5" X 3" or the hopper is 5"X3.5"X10" the mounting flange is an additional 3" high |
What are the dimensions of this catcher? | 5 3/8" wide (laft to Right as in picture above, 3 3/8" out from wall, catch can is 10" deep and the plate on the back with the hole to hang it is 3 3/4" tall from the catch can. |
What are the dimensions of this catcher? | It is the size of a box of kitchen matches - the large size box. Hope that helps. |
OK, I am first time RC Helicoptr owner, so I have a beginner's question. Now that I have it, do you screw down the helicopter blades before using? | No sir. The blades need to be just loose enough for them to straighten out when they rotate so that they automatically balance outward. If tightened, their is a good chance that they wouldn't be perfectly straight, causing and out of balance rotation. I haven't made any adjustments to mine, and it flies quite well. |
I'm looking for a blanket for people to sign. Would this fabric be suitable for fabric pens? | I'd say no, although I've never used a fabric pen. If they are like markers....my thought would be not to try it. The writing might smear. Too nice a blanket to get ruined. Maybe someone else, familiar with fabric pens, will advise you correctly. |
I'm looking for a blanket for people to sign. Would this fabric be suitable for fabric pens? | Thanks for your question. The best blanket to have signed is the Vellux Original Blanket. The ink won't set well on the fleece blanket. Vellux Original Full/Quteen Blanket, Wedgewood Blue |
I'm looking for a blanket for people to sign. Would this fabric be suitable for fabric pens? | Not at all!!! Look for something of plain weave or cotton like muslim. Good luck! |
I'm looking for a blanket for people to sign. Would this fabric be suitable for fabric pens? | Maybe if you used a sharpie? It is fleece...kind of like the inside of a sweatshirt... |
My Lens is stick on this, do you have any clue how to take it out?! | The Canon lens should have a rectangular metallic button to release the lens. |
Which hard case is the best for WD My Passport Slim? | I purchased the "Case Logic QHDC-101 Portable EVA Hard Drive Case - Black" with mine. Although I wouldn't call it a hard case, it's heavy duty fabric and it is quite stiff. Seems to do a great job of protecting the drive when transporting it, and would likely survive most falls. Definitely not crush-proof if that's a concern. It also has an interior pocket with room for two small USB cables, a flash drive, and a headphone adapter while still zipping up nicely. |
can i get a replacment on the 17mm eyepiece? the rubber came of it with not falt of mine | Dear, sir or madam, with proof of purchase Orion will honor our warranty. You will need to contact Orion. I'm not quite sure how much information Amazon will be ok with me listing. |
WILL this cover the rims and full wheels? | Covers about half way down the tires. It does cover the winch in front, gets just under the cab. |
WILL this cover the rims and full wheels? | Covers spare wheel and rims only. I really like this cover. BUT it pools water in the center during a down pour, so you'll need to prop center up with a poll or something. |
WILL this cover the rims and full wheels? | No, just over front bumper to back bumper , to the running boards on sides. Its a great cover. |
what size is the screw hole on the bottom? | Don't have tripod with me now. But according to manual (http://lib.store.yahoo.net/lib/yhst-39436527843437/PH157QManual.pdf), it's UNC 1/4". |
what size is the screw hole on the bottom? | I don`t know , it fits Velbon Sherpa 200 tripod also there is adapter for smaller size |
what size is the screw hole on the bottom? | Sorry, it is a 1/4 inch hole.I checked the Velbon Ultra Luxi tripod's pin that engages the head with my calipers and it is a 1/4 inch pin.The head does not have any other hole, so you will need to get an adaptor to allow you to use your tripod.These are fairly cheap, but a pain in the neck to use. Can you get a different tripod? |
what is the warranty? | I forget, but I think it's 3 years. Mine is working great, and I bought it in 2012. It packs plenty of power for the price. Good deal. Glad I bought it. |
what is the warranty? | I don't remember but my experiencia with others like this is that they seem to last forever |
is this good for noncolored normal hair? | I have non-colored normal hair and it's fine. It is very moisturizing and causes build-up after a while, so I'd recommend rotating it with another (clarifying or less moisturizing) shampoo |
is this good for noncolored normal hair? | Yes. If a shampoo works for colored hair, it's usually more delicate for normal hair. |
where are these made? | The mugs are actually made in India. It says so right on the box. Let me know if you have any other questions. FYI, they are very high quality for the price. |
I understand that this model doesn't it have focus peaking but does this monitor have a histogram, anamporphic framing, and other on screen tools? | No. It's mainly a monitor for viewing the image. It has freeze frame and you can cycle through the Red Green and Blue colors seperatly, but nothing major like peaking or histogram or vector scope. |
Is this the same as using super glue? | As a chemist, super glue and no fray are different chemically. I use no fray to stop a small hole from fraying and getting bigger on clothing or a seam from fraying more. Sometimes it appears slightly darker, but gets lighter as it drys. Test on a hidden area first like the directions say, and allow it to dry long enough. It does hold up for years, even with multiple washings. It easily washes off with soap and water if you get it on your hands, unlike the cyanoacrylate in super glue. |
Can I activate this with Cricket? | No, a SIM card is used for this phone. This phone works with GSM cellular technology (SIM card) and Cricket cell phones use the CDMA cellular technology (no SIM card). |
What does this unit come with? is all i need to install included (not counting the tools ofcoarse)? | You'll need the adapter to match your car's harness unless you want cut and hack your harness. You may have to mod mounts/bracket depending on your car. You will need the double din mounting kit including front plate cover. You do know this unit does not have a built in cd/did player right? |
What does this unit come with? is all i need to install included (not counting the tools ofcoarse)? | You will need to purchase the wiring harness for your car, an antenna adapter, and a dash kit. About 50$ total. Install was super easy and took about half an hour. Good luck. |
I dont get if it will work on ANY Intel chip system. or just "Pentium', which is one of the Intel chip sets. My new PC is a i5, the old one is either | If you were running a Pre-pentium chip you would be on windows 3.1, in other words unless you stole the computer from a museum, it's a pentium chip |
I dont get if it will work on ANY Intel chip system. or just "Pentium', which is one of the Intel chip sets. My new PC is a i5, the old one is either | I moved my files from windows xp to windows 7 without a problem. I don't think it matters what chip you have just OS. |
I dont get if it will work on ANY Intel chip system. or just "Pentium', which is one of the Intel chip sets. My new PC is a i5, the old one is either | I don't believe it matters as long as your old computer does not have a real old version of Windows. Good luck! |
I dont get if it will work on ANY Intel chip system. or just "Pentium', which is one of the Intel chip sets. My new PC is a i5, the old one is either | I bought it based on OS, not chip. I have no knowledge about chip to begin with so I would not have known the difference to impact a buy decision. We used it to transfer files from 6-year old XP Dell Inspiron workstation with an Intel core 2 quad using 32X processor to a now one-year old WIN 7 home edition Dell with Intl core i5 with 64X processor workstation. It does the transfer what you want to move once you figure out how to set it up. It was a bit frustrating to get started for this novice. For a one-time migration use that I bought it for, it was a good investment. |
Penny Wise and Pound Foolish? This model is on sale right now for 99 bucks which seems cheap, but is it really? | Why must everyone get a map update? I never do. Hell, one of my GPSs hasn't had a map update in ten years and it's not perfect... but with a little common sense I can use it to navigate anywhere I want. This one is recent enough that I think it's fine. For $99, it was an excellent deal. This is an awesome GPS. I don't think paying 50% more for maps and bluetooth is a bad idea, but not everyone needs either of those feature. |
How is the flow of oil controlled, to start & stop flow? | Just a slight little squeeze gives you a small drop of oil. So, it doesn't just spill out all over the place and make a mess. It is controllable. Then I store it up rather than keeping it on it's side when not in use. I use it for classical guitar tuners. |
Should I buy the warranty? 3 and 4 year ones are offered at time of purchase. | Too late for Anni, but if anyone else has this question . . . I have had this scanner for nearly longer than I can remember (at least more than 7 years of heavy use) with ABSOLUTELY NO failures/issues. |
Should I buy the warranty? 3 and 4 year ones are offered at time of purchase. | I didnt, have had no issues. The way technology advances I wouldnt want this device in 3 to 4 years anyways. |
is this product dual voltage to work in both the u.s. and europe? Will this product recharge in a wall outlet with just an adapter (not a converter) in Italy? | Yes, the AC adapter can be used on voltage from 100v to 250v. Thanks Thanks EnerMall |
this motherboard support an aMD 8320/8350?, and how much good the onboard graphics is? | it supports both amd fx 8320/8350. The onboard graphics is an ATI Radeon 3000 so its will be ok for some real light gaming but not the best by no means |
this motherboard support an aMD 8320/8350?, and how much good the onboard graphics is? | It will support any AM3+ CPU including the FX series with a BIOS update. I prefer never to use onboard video as for it uses physical RAM for it's video memory. I would recommend a small cheap AMD GPU to go with the board. |
this motherboard support an aMD 8320/8350?, and how much good the onboard graphics is? | Yes it will support the 8350, and the onboard graphics aren't bad but don't get very far game wise. You will need to set out a bit of the budget for a dedicated card to get some real performance. |
this motherboard support an aMD 8320/8350?, and how much good the onboard graphics is? | the onboard graphics card is not that bad. not too much of a gamer, however I have played Doon 3. I have sold many of these motherboards and have no problems are the graphics. |
this motherboard support an aMD 8320/8350?, and how much good the onboard graphics is? | Note that the on board graphics is not supported in Win8.1 or Win10. AMD says it was moved to a legacy product in October 2013 and no additional drivers are planned at this time. The Windows 10 basic driver does not support this graphics card very well. It only supports 1280X1024 maximum resolution. |
Has anyone been in an accident when their dog was restrained in this harness? What was the result? Was the dog unharmed? | If you are in a serious accident this will do little. It is more to keep your dog from being thrown about with a sudden stop or regular accident. If a serious accident is primary concern a hard crate or pod is the only way. But if objective is not allowing dog to be a distraction or thrown about this is good. |
Has anyone been in an accident when their dog was restrained in this harness? What was the result? Was the dog unharmed? | I have not, but my 70# dog was thrown to the floor without one. And that did it for me! |
Has anyone been in an accident when their dog was restrained in this harness? What was the result? Was the dog unharmed? | We hit an 850# Elk standing in the road. 75 braking down to 40-45 mph (best guess) - air bags deployed and lots of vehicle damage - Lizzy (45 lb lab mix) seemingly un-phased and uninjured awakened from her slumber with a WHAT THE HECK look on her face. Every accident is different, of course and LOTS of injury could happen to your pet - but in our case (forward deceleration) our pup was a-okay (as were we). |
Could I charge my itaste MVP with this? Has anyone tried? That would be my main use during hurricane season. | It looks like the MVP has a 2600 mah battery. As long as you have a USB charge cable with it, it should charge it to about 95% before depleting assuming the sunflower was at full charge. |
will you combine shipping for more than one package? | Yes, Amazon website will automatically combine the shipping based on the total weight. Thank You. |
will you combine shipping for more than one package? | Yes,Amazon website will automatically combine the shipping based on the total weight.Thank You. |
Will the spindle work with the winder? I am trying to understand the best way to get the fabric around the spindle right now. | You're going to be really happy! You can wind it by hand, but no need because you have the Simplicity Winder! I use the Winder to get my bias strips on to the spindle. When I wound it by hand the tension was uneven on the spindle but the Winder does a great job of getting the bias strips evenly wound on the spindle. Then you take that and put it on the bias tape maker. |
Is the vise compatible with the 3000 series rotary tool? | It's totally compatible since they don't need to interconnect. Think of this tool as a third hand to have your work piece steady and fixed. |
Is the vise compatible with the 3000 series rotary tool? | First, as any Dremel tool is functional, strong and perfectly meets the performance for which it was designed and, second, it is compatible with the 3000 series rotary tool. In my case I have used Dremel 2500-01 Rotary Tool Multi-Vise successfully in all those jobs where Dremel tool is indicated. I highly recommend without place to doubts. |
Is the vise compatible with the 3000 series rotary tool? | I am not sure about the 3000 series but it works just fine with my older model 285 Dremel. I believe the nose cap and thread are the same. |
Is the vise compatible with the 3000 series rotary tool? | First, as any Dremel tool is functional, strong and perfectly meets the performance for which it was designed and, second, it is compatible with the 3000 series rotary tool. In my case I have used successfully in all those jobs where Dremel tool is indicated. I highly recommend without place to doubts. |
Is the vise compatible with the 3000 series rotary tool? | Compatible in what way. It's not a heavy duty steel vise that will hold big heavy objects, but is is very strong and well made. It will hold your project easily and tilt or swivel most any angle. I am sure it would also hold most any Dremel tool, I just have not tried that. You can tighten it plenty tight enough, maybe not as tight as a steel vise, but just fine for most of your craft projects. I like it and felt it was well worth the money. |
Is the vise compatible with the 3000 series rotary tool? | While I have yet to use my vise to hold my rotary tool (it's great holding the workpiece), I did check the specs for the 3000 and it says the 3000 is compatible with all attachment except two, and those are not the vice. The 3000 nose cap comes off, and that and same size threads as other tools is all that is needed. |
does this phone have gorilla glass? | Yes. If you want mine, i will sell it to you. Doesn't work with the limited towers we have in the Caribbean island of vieques. Brand new with a clip on holster. Send reply to [email protected] |
How well will this product work in a 500 gallon Hot Tub? | I used it in a 25000 gal. pool. I worked great in my pool. I'm not real sure how it would work in a hot tub. In my hot tub I throw in a tablespoon of chlorine once a week and that seems to work well. I think they have a smaller model for just hot tubs. |
How well will this product work in a 500 gallon Hot Tub? | It will help tremendously. We use to have inground pool that was alot bigger and deeper then the pool we have now and this tablet holder worked amazingly still. We are actually getting a hot tub this year that fits 10 people and plan on using this as well for it. 0 |
How well will this product work in a 500 gallon Hot Tub? | I use one of these in my 500 gallon spa with one CL tablet. I gave a second one in my pool with mulpital tabs. This usit works well because it does not sink and is stable. |
How well will this product work in a 500 gallon Hot Tub? | I'd think it would work great. You can adjust the opening to let out a lot or a little. Ours covered our whole pool (12x24) very well. It just may take some experimenting to get the right setting. We were really pleased with ours. Good luck. |
How well will this product work in a 500 gallon Hot Tub? | It should work just fine. I use mine in a 1500 gal spa attached to our pool. However, the overall quality is low, not the quality of the previous one I purchased at a pool supply. But it is cheaper. |
Is the container displayed/sold to be used within the two days, or is there more in the container? | Olga I think I had the Vanilla Flavor, but as to your question, if memory serves, It should be enough to get you through the program only. |
Is the container displayed/sold to be used within the two days, or is there more in the container? | It's for the 2-day fast as indicated on container...if you do portion just as it states. I didn't lose anything but have read other reviews that it worked for them. |
Is the container displayed/sold to be used within the two days, or is there more in the container? | The contents are just enough for the two-day fast. Results not as good if you try to stretch it or share it. |
I'm looking at either the howler or the chinook mask. Is the howler like the chinook & the top will tilt back? I'm assuming the howler is made better? | The top does flip back and if you are ever looking for a different brand, if it says hinged,then it flips back. Also, I like a longer neck gaiter which this one doesn't have. It did do well in -20 below |
I'm looking at either the howler or the chinook mask. Is the howler like the chinook & the top will tilt back? I'm assuming the howler is made better? | yea the howler is better for coverage and comfort. I have both and I would rather go with the howler |
Read reviews about fluff coming out from underside-have you had this issue? If yes, how long have you had the cover and times it was washed? | The Cribwrap we purchased is cotton/polyester, and it's not been washed yet. Since we bought the crib & wrap for our grandson who is here occasionally, it doesn't get much wear!Love the light blue color with chocolate brown dots! Very cute! |
Read reviews about fluff coming out from underside-have you had this issue? If yes, how long have you had the cover and times it was washed? | We've used this in my daughters crib now for almost a year and haven't had an issue. But if it ever happened to me, I'd contact the manufacture. Most of the time, that seems to do the trick when it comes to that kind of stuff. Hope that helps. |
Read reviews about fluff coming out from underside-have you had this issue? If yes, how long have you had the cover and times it was washed? | Hi. These are great. No fluff has ever come out (washed weekly for over a year) I used these until last week when I transferred my son to a toddler bed. Great purchase |
Read reviews about fluff coming out from underside-have you had this issue? If yes, how long have you had the cover and times it was washed? | I have had the cover for several months but have not washed it so I cant say if the fluff comes out. I will say that this is the softest rail cover I found and it stays in place. |
Do the legs by any chance fold in so it stores flat? | They do fold but not flat, just a little gap, fit nicely in my taller, narrow cabinet, I stack them on the longer side, alternating the "legs" so they take up less room, so flat side to side of cabinet, legs of two racks together, then flat to flat. They then take up less room. |
Do the legs by any chance fold in so it stores flat? | Yes, each level can fold flat and then stack on top of each other, or store separately. Sometimes I even use them flat if I just need one level. They're great! |
Do the legs by any chance fold in so it stores flat? | They do fold in...not perfectly flat because they have a bend in the legs. But once folded in they are only about an 1in tall. And stacked together(with the legs folded) they are only about 2-1/2" tall over-all. Hope this helps. |
Do the legs by any chance fold in so it stores flat? | Yes, they do fold in which makes it very nice to store in the cabinet. I actually leave mine folded and separated when using...just makes it easier to place cookies on. |
I've tried several discs that come with adhesive on them. But the adhesive fails to stick in the Florida Sun and the discs become loose . | I had the same problem getting it to stay stuck, but I think it is the soft dash more than the sun. I have a smaller one stuck to the metal portion and it's been there for a year with no problems. |
I've tried several discs that come with adhesive on them. But the adhesive fails to stick in the Florida Sun and the discs become loose . | I used this on the dash of a 2008 Equinox which is somewhat pebbled. Works fine with a dash camera & mount here in Alberta. |
I've tried several discs that come with adhesive on them. But the adhesive fails to stick in the Florida Sun and the discs become loose . | I think it depends on the weight of the thing that you are sticking it to. I got this for a cell phone holder and it did not hold up in the So Cal weather. I ended up using the windshield |
I've tried several discs that come with adhesive on them. But the adhesive fails to stick in the Florida Sun and the discs become loose . | The product from this seller is defective and will not stick no matter what you do. I live in MN, so heat is not the culprit. Just a poor product. I had one directly from my GPS manufacturer and it worked fine. |
I've tried several discs that come with adhesive on them. But the adhesive fails to stick in the Florida Sun and the discs become loose . | This seemed to stick well. My girlfriend traded the vehicle it was in after about 4 months, so can't comment beyond that. |
I've tried several discs that come with adhesive on them. But the adhesive fails to stick in the Florida Sun and the discs become loose . | Two suggestions: First and foremost, when first installing the disc, make sure it's on a flat section of your dashboard and pile books on it for the first few days whenever the vehicle is not in use. This will allow the adhesive to "cure" before you attach your GPS bracket or the bracket for some other device. Secondly, try to use those aluminum foil windshield shades whenever possible and throw a wash cloth over the GPS to shade the adhesive disc whenever you're not driving the vehicle. We do this in NC where the sun is also hot and it's been working.Paul Baragona Raleigh, NC USA Two suggestions: First and foremost, when first installing the disc, make sure it's on a flat section of your dashboard and pile books on it for the first few days whenever the vehicle is not in use. This will allow the adhesive to "cure" before you attach your GPS bracket or the bracket for some other device. Secondly, try to use those aluminum foil windshield shades whenever possible and throw a wash cloth over the GPS to shade the adhesive disc whenever you're not driving the vehicle. We do this in NC where the sun is also hot and it's been working.Paul Baragona... » Read More Two suggestions: First and foremost, when first installing the disc, make sure it's on a flat section of your dashboard and pile books on it for the first few days whenever the vehicle is not in use. This will allow the adhesive to "cure" before you attach your GPS bracket or the bracket for some other device. Secondly, try to use those aluminum foil windshield shades whenever possible and throw a wash cloth over the GPS to shade the adhesive disc whenever you're not driving the vehicle. We do this in NC where the sun is also hot and it's been working.Paul Baragona Raleigh, NC USA « Show Less |
What is the weight requirement for this product? | I honestly was told by my daughter's pediatrician that a child over 40lbs can begin to sit on a booster seat. Hope this helped. |
How is this one different from the higher-priced item they sell that looks identical? | I'm afraid I don't know the answer to that James, but I would guess that the price is the only real difference. |
How is this one different from the higher-priced item they sell that looks identical? | Well I have to say that I don't understand this either. I noted that higher-priced one, and it DOES look identical. I think the higher-priced one has the wrong photo. The one I got looks just like this photo shown. |
How is this one different from the higher-priced item they sell that looks identical? | The higher priced one has a wood slat top... It is in the description. Although, the wrong one is pictured. I thin k they are identical, otherwise. We just put together the non wood version and it is a great value for the low end potting bench. |
Does it leave a weird film on things in the room it is placed in? I've had this problem with humidifiers | Not that I have noticed. It does get a film on the inside if the humidifier but a cleaning once every couple weeks takes care of that. |
Does it leave a weird film on things in the room it is placed in? I've had this problem with humidifiers | Morgan - It was defective and didn't hold water. We returned itand bought another brand. |
Does it leave a weird film on things in the room it is placed in? I've had this problem with humidifiers | Yes but I think it has more to do with your water source than the humidifier. It did more when I used tap than with distilled. |
where is the clock and time, mine does not have that | once you set it up, it prints out on the paper, as long as you have the date/time button on. |
So what if your rings are high or low? how does bore sighter line up to scope? | If you have a radical set-up, say an AR15 with a scope on rings on top of the carry handle, it won't work. There is an add-on kit for this unit that will compensate for that sort of thing, also for larger than normal bore diameters. |
So what if your rings are high or low? how does bore sighter line up to scope? | it works best on stander mounts it gets you on the paper you will need to fine adjust. Or try a laser chamber sight I have used both. Good luck |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.