query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Does this charger come with a cigarette lighter adapter so that I can charge my car battery through my cars cigarette lighter inside the car? | They DO make a plug with a cigar lighter that DOES plug into the Tender plug. They sell it at motorcycle stores and possibly on Amazon as well. I know this because I have one and use it to power my GPS on my motorcycle. |
Does this charger come with a cigarette lighter adapter so that I can charge my car battery through my cars cigarette lighter inside the car? | No it dose not. You can buy one, at one point they made one item like that. If you chose to so that make sure that the cigarette lighter is clean and not burnt up on the in side. I have seen car wiering melt from that point and cause an electric fire. The Battery Tender seals some great accessory for ther charger look on ther website. Other wise the charger is great and not had one dead battery yet... |
Does this charger come with a cigarette lighter adapter so that I can charge my car battery through my cars cigarette lighter inside the car? | Mine did not. A 12v power end available at a parts store could be wired to the output side to accomplishcharging the car battery. Make sure you have the polarity correct. |
Does this charger come with a cigarette lighter adapter so that I can charge my car battery through my cars cigarette lighter inside the car? | Mine did not. A 12v power end available at a parts store could be wired to the output side to accomplish charging the car battery. Make sure you have the polarity correct. |
Does this charger come with a cigarette lighter adapter so that I can charge my car battery through my cars cigarette lighter inside the car? | It does not come with a cigarette lighter adapter. For charging car batteries I'd recommend using the adapter with clamps, what you would find on most battery chargers. The semi-permanently mounted adapters with terminal ends are great for motorcycles, but the terminals are far too small to use on car batteries.Some cars only have the cigarette lighter active when the ignition switch is in the accessory mode. This would make it difficult to use on many cars. |
Does this charger come with a cigarette lighter adapter so that I can charge my car battery through my cars cigarette lighter inside the car? | I cannot remember for sure but I do not think so. The output wire has a standard two prong connector that plugs directly into the battery on my Harley and also into the normal aligator clip that (supplied) that I connect to my battery. I am very happy with the tender but in my vehicles which are several years old, the lighter adapter is not hot unless the ignition is on which would run the battery down faster than the tender could add any charge. It really isn't a battery charger. The charging output is very low so the battery has to be charged before you can "tend" it. |
What are the 16 spices included? | Marjoram, basil, celery salt, crusted mint, parsley, chives, sea salt, bay leaves, coriander, fennel, herbes de provence, rosemay, pizza season, italian season, oregano, season salt. |
My Windows 8 laptop recognizes this card reader immediately...but when I insert a micro-SD card, the card is not recognized. Maybe I have a bad card? | G. Powers,That is possible. Have you tried any other cards? I have not had any issues at all with this reader. If not try connecting the device directly to the computer, good luck my friend. |
My Windows 8 laptop recognizes this card reader immediately...but when I insert a micro-SD card, the card is not recognized. Maybe I have a bad card? | Sometimes sd cards need to be formatted. If this is not the case in your situation, then look up trouble shooting for the card reader. All else fails you can obviously try another card or contact customer service for the manufacturer, they should be able to walk you through trouble shooting and correcting the problem. |
My Windows 8 laptop recognizes this card reader immediately...but when I insert a micro-SD card, the card is not recognized. Maybe I have a bad card? | IF you wish to see if your card is defective, try going to a store such as target and inserting it in to one of their photo machines. If the card is all right, the card will be recognised, |
My Windows 8 laptop recognizes this card reader immediately...but when I insert a micro-SD card, the card is not recognized. Maybe I have a bad card? | I haven't had any trouble so far with it,most likely try a different micro-sd card or reformat it hope I was a Lil helpfull |
I have tops that are cracking can tops be bought ? | One of my lids arrived cracked. I contacted the company I purchased them from and they sent me a lid. |
Does this need to be removed to put onto the dock or keyboard? | Yes, the cover needs to be removed prior to charging it on the docking station, or using it on the docking station with the keyboard. You can also use the propped case/cover with the keyboard up close to it. |
Useless without HDMI TV: Some publishers have "promised" not to enforce this- but who wants to spend this kind of money on a time bomb? | Actually, the DRM you referred to exists in both Blu-Ray and HD-DVD machines, but as of this posting ALL movie studios have said they would rather not enforce downrezzing than have a large yellow sticker on the cover of their movies stipilating that the disc will indeed downconvert, which they would be forced to do if they chose to exercise that option. Furthermore, the first generation players will be grandfathered, meaning even if a Blu-Ray or HD-DVD disc contains software to require downrezzing for analog out, it will not do so on those players. This little point has been made and debunked thoroughly over and over. Even when players do come out that require HDMI connections for full HD content will downres to 525p, which looks considerably better than the 480p that high-end DVD players can do. Worst case scenario, Blu-Ray does everything and more that your DVD player will do. Best case scenario, it does a hell of a lot more. |
will it work on windows 7 64 bit and can it work pci ex x 16 ? | yes.. i picked this card up for my grandson win 7 64 bit pci ex x 16.. just make sure you get the DDR5 card if you are going to play games like battlefield 3 or 4 |
will it work on windows 7 64 bit and can it work pci ex x 16 ? | yes and yes... that is how I am running it and it is a decent performer, for what it is. |
Will this fit on a Britax Boulevard? | It is very versatile. But am not sure it stay securely attached to a car seat like that. Really no good place to attach it. Sorry |
How wide is the belt? | I believer mine is 1.5". It fits slacks and jeans without a problem. As i recall there were options regarding belt size. Hope that helps. |
How wide is the belt? | First one I ordered thru Amazon was 1.5 inches. I realized upon recieving it that it was too skinny so I contacted the company who gave me an ra# to return it to them for a wider one which is 1.75 inches. It cost me shipping but it was worth it. 1.5 is like a dress belt and simply won't hold a proper rig. |
I bought the fan but didnt get the remote, do I need to buy a seperate thing for the fan or just the remote for it to work ? | When I bought the fan, I had a remote. The original remote got stepped on. So I had to buy another. They guy who put my fan up was able to get the new remote to work with fan. |
I bought the fan but didnt get the remote, do I need to buy a seperate thing for the fan or just the remote for it to work ? | I purchased the fan which came with a remote. I purchased an additional remote so I could have one it at each of the locations I would need it. Just make sure you are purchasing the correct remote for your fan. |
HI. Can you tell me what variety of blue rock cress this is? It's really important as I'm landscaping a large area and want to know what color | I am sorry, but I haven't planted them yet and do not know any more about them than what it says on Amazon. Good Luck. |
HI. Can you tell me what variety of blue rock cress this is? It's really important as I'm landscaping a large area and want to know what color | First time I've bought and only have the description to go by. Plan to plant this spring. |
Will this head fit a Shurflo 2088-433-244? 12 volt systrem | Yes, I think it fits all 2088 pumps, the voltage doesn't matter (pressure switch works on any voltage) |
Is this worked for 2002 Nissan Altima? | As long as you get the right bulb size they well. Double check what size bulb your lights take. This kit is a plug & play meaning all you have to do is plug them in. Make sure you find a spot to mount the ballast |
Is this worked for 2002 Nissan Altima? | I've seen Altimas with them. You just have to pick the correct bulb size and then find somewhere to mount the ballasts. On my 2011 Mazda I had to put a cold air intake because it didn't fit with the stock intake. For reference the ballasts are about the size of a trifold wallet and as slim as 1 or 2 phones on top of each other. |
Does the charger change color if the battery is finished charging? | Yes. It changes from red to green. I used the light tonight on a 2 hour mountain bike ride and it performed flawlessly. |
Does the charger change color if the battery is finished charging? | Yes. It goes from amber to green. (amber when charging, green when finished) |
How many applications does this kit contain? | There's 3 syringes of gel in one pack..each have about 6 applications per syringe |
how do I determine the correct size | I'm a Large in all button shirts that I ever tried, and a medium in this one. I ordered a large because I had the same shirt that I in Israel (probably European stock), and I was too big to wear. My advice is to size down. |
how do I determine the correct size | I got my husband 2xt nice room to move an quick to dry he's 6'3" an broad thru shoulders length of sleeve really no issue because of the tabs on sleeves it become elbow length with those I think very true to size |
how do I determine the correct size | The one I purchased ran true to size. Remember, they are a "relaxed fit" for activities, not a snug dress shirt. |
how do I determine the correct size | Most of the reviews said they ran a size large, so I ordered one size smaller than usual and it fit good! |
Will it fit Nikon D5100? | Yes, very nicely. Usually I have the 35mm attached, but even with an 18-55mm it'll fit (snug). If you have a strap attached to the camera body, there are no cut-outs for it in the case. With a 35mm attached, you can fold the strap and zip it up in the case with the camera, but only just. |
Will it fit Nikon D5100? | I can't say if it will fit the Nikon D5100. I use it with a Canon SX50HS which is 4.75 in wide 3.75 in high and 4.5 in long. In the case there is about another inch of space available so a 5.5 in long camera would probably fit. |
Will it fit Nikon D5100? | I think that it probably would with the standard 18-55mm lens. I bought it for my Panasonic Lumox FZ200 Bridge camera and it just barely fits with it's long lens in there. Of course, you can't really carry much else in this case except maybe some cleaning wipes and extra memory. I do like the pull-out rain cover and it suits to just pack your camera around on day trips and such. |
Will it fit the iPad mini or do you have something else that will | I have iPad 2 and my daughter loves it. The only issue with it, the charging port does not quite fit. |
I just ordered a 2.2 lb. bottle of the Dezcal Descaler. Came of no instructions. Can anyone give me some ideas on how to use this on a Cuisinart Single Cup Coffeemaker with an 80 oz. water tank? | Please visit the manufacturer's website (http://www.urnexathome.com/product/Dezcal/13165.aspx) for instructions on how to use. The site recommends 1 oz of Dezcal for each quart (32 oz) of water used. This product is non-toxic and safe to use on home coffee makers and single-cup brewers. However, if you're concerned (as was I) about getting all of the solution out of the coffee maker, the FAQ's explain how to verify using baking soda. |
I just ordered a 2.2 lb. bottle of the Dezcal Descaler. Came of no instructions. Can anyone give me some ideas on how to use this on a Cuisinart Single Cup Coffeemaker with an 80 oz. water tank? | The bottle I received came with instructions to use 7 oz. with a gallon of water. The simplest process is to divide each by 4: 1.75 oz. of Dezcal Descaler powder to a quart of water. Use in your coffee maker. Run 2-3 times with clean water after using the descaler. Hope that helps. |
I just ordered a 2.2 lb. bottle of the Dezcal Descaler. Came of no instructions. Can anyone give me some ideas on how to use this on a Cuisinart Single Cup Coffeemaker with an 80 oz. water tank? | Take 36 oz. of warm water, mix 4 level tablespoons of Dezcal powder to the water. Stir until the powder is completely dissolved. Pour this water into your machine tank and "brew" four 12 oz. cups of water through the machine, then rinse out your water tank. Add clean water to the tank and flush "brew" four 12 oz. cups. The recipe for using Dezcal is about 1 oz. powder (2 Tablespoons) to 16 oz. of water to make a descaling solution. This is a professional product designed for pro espresso machines, etc. However, if you follow the directions I gave you, it is the equivalent of Urnex's consumer line of descaler. (It is the same ingredient) Take 36 oz. of warm water, mix 4 level tablespoons of Dezcal powder to the water. Stir until the powder is completely dissolved. Pour this water into your machine tank and "brew" four 12 oz. cups of water through the machine, then rinse out your water tank. Add clean water to the tank and flush "brew" four 12 oz. cups. The recipe for using Dezcal is about 1 oz. powder (2 Tablespoons) to 16 oz. of water to make a descaling solution. This is a professional product designed for pro espresso machines, etc. However, if you follow the directions I gave you, it is the... » Read More Take 36 oz. of warm water, mix 4 level tablespoons of Dezcal powder to the water. Stir until the powder is completely dissolved. Pour this water into your machine tank and "brew" four 12 oz. cups of water through the machine, then rinse out your water tank. Add clean water to the tank and flush "brew" four 12 oz. cups. The recipe for using Dezcal is about 1 oz. powder (2 Tablespoons) to 16 oz. of water to make a descaling solution. This is a professional product designed for pro espresso machines, etc. However, if you follow the directions I gave you, it is the equivalent of Urnex's consumer line of descaler. (It is the same ingredient) « Show Less |
I just ordered a 2.2 lb. bottle of the Dezcal Descaler. Came of no instructions. Can anyone give me some ideas on how to use this on a Cuisinart Single Cup Coffeemaker with an 80 oz. water tank? | Take 36 oz. of warm water, mix 4 level tablespoons of Dezcal powder to the water. Stir until the powder is completely dissolved. Pour this water into your machine tank and "brew" four 12 oz. cups of water through the machine, then rinse out your water tank. Add clean water to the tank and flush "brew" four 12 oz. cups. The recipe for using Dezcal is about 1 oz. powder (2 Tablespoons) to 16 oz. of water to make a descaling solution. This is a professional product designed for pro espresso machines, etc. However, if you follow the directions I gave you, it is the equivalent of Urnex's consumer line of descaler. (It is the same ingredient) |
I just ordered a 2.2 lb. bottle of the Dezcal Descaler. Came of no instructions. Can anyone give me some ideas on how to use this on a Cuisinart Single Cup Coffeemaker with an 80 oz. water tank? | Read the side of the product. I received and was able to use it following the instructions on the side of the product. |
I just ordered a 2.2 lb. bottle of the Dezcal Descaler. Came of no instructions. Can anyone give me some ideas on how to use this on a Cuisinart Single Cup Coffeemaker with an 80 oz. water tank? | Don't use it!! Seriously, it is for professional equipment only - I ruined my lovely new DeLonghi coffee maker with this stuff .... Return it for Urnex tabz instead or just use white vinegar and water! Hope this helps ;) |
I just ordered a 2.2 lb. bottle of the Dezcal Descaler. Came of no instructions. Can anyone give me some ideas on how to use this on a Cuisinart Single Cup Coffeemaker with an 80 oz. water tank? | If you google the make and model number of your coffee maker and the word cleaning, you will find your answer including most likely youtube videos to demonstrate. The cleaner is fantastic, just not familiar with your machine. Mix it with water according to the label and use it instead of vinegar in the cleaning instructions. |
Is it induction ready? | The T-Fal website for Canada says this set is "safe to use on all heat sources, excluding induction." So I wouldn't use this on an induction oven. |
Since it adjusts, my 15 year old is going to lower it and dunk (hang on the rim). How hard do you play on it and how has it held up? | I would not recommend hanging on this hoop. Dunking Ok. Hanging will probably do some damage. |
Since it adjusts, my 15 year old is going to lower it and dunk (hang on the rim). How hard do you play on it and how has it held up? | It seems pretty solid, but we mostly just throw baskets, we haven't had anyone hang on the rim. |
Since it adjusts, my 15 year old is going to lower it and dunk (hang on the rim). How hard do you play on it and how has it held up? | The goal is top notch! This is the best basketball goal I have ever had. I am a 34 yr old male that grew up playing basketball. This goal seems to be able to pass the hang test( my boys are constantly dunking and hanging on the rim) However, I strongly suggest that you should have them avoid it on any goal. Especially from the front of the rim. If your boy is going to hang and show out (have fun) teach him to dunk from the side and try to hang closer to the back of the rim close to the backboard. He will have fun with this goal and be the envy of the neighborhood boys for sure!! |
Since it adjusts, my 15 year old is going to lower it and dunk (hang on the rim). How hard do you play on it and how has it held up? | We have an 18 year old and a 12 year old who use the hoop consistently. The 18 year old has friends that play too, but none of them dunk on it. We were afraid it would break. It has held up very well without anyone dunking on it. |
Will it fit up to 3 years or 5? | We LOVED this high chair and tried to use it as a "youth chair" at the table but that did not work for us. We found it got too small about age 2 1/2. Our child is in the 99 percentile ht and wt . By 35 lbs and 35 inches tall it would not fit any more. |
Will it fit up to 3 years or 5? | Hi, my son is 3 years and a half and he still fits comfortable there. This was originally his chair and is now his sisters, what I'm trying to say here is that it is also a very good quality product. |
Will it fit up to 3 years or 5? | I would think so. The weight limit says it will hold up to 50lbs. Ive put my child in itaitagain recently and she's 2 years old and 28lbs right now. |
What size are these gaiters? | They are one size fits most. Unless you are very, very far on either end of the size scale they should fit any adult no problem. |
What size are these gaiters? | I'm 61 230 And these fit perfectly with extra room. for my r2r hike of the Grand Canyon last month A+ product |
What size are these gaiters? | I didn't see any size but I took a chance and my calves are large and they fit great |
The hood on my 2013 Wrangler Unlimited shakes a lot around 75-80 (depending on head wind). Will this help? | Not likely as it actually screws to the hood. It would create a bit of down-force which could help but realistically, if your hood shakes you may need to get some improved tie down clamps. The rubber on yours could be stretched out. |
The hood on my 2013 Wrangler Unlimited shakes a lot around 75-80 (depending on head wind). Will this help? | It does a little, great for deflecting bugs from windshield. Replace the hood's rubber tie downs with metal ones from Rugged Ridge, takes care of hood shake at highway speeds. Very easy to replace. |
The hood on my 2013 Wrangler Unlimited shakes a lot around 75-80 (depending on head wind). Will this help? | No. You need to get the non-move latch. The deflector will help with stone pits on you windscreen |
The hood on my 2013 Wrangler Unlimited shakes a lot around 75-80 (depending on head wind). Will this help? | The highway speed hood shaking is due to the stock rubber latches being stretchy, the hotter the weather the easier they allow hood bounce. As mentioned, the best fix is a set of metal off roading latch replacements, they come in chrome/black, can be installed yourself if you are willing to watch some videos of how to do it, and completely eliminate shaking from wind/passing 19 wheelers. This piece is made to keep your hood looking nice by protecting the leading edge and deflecting stuff over. |
The hood on my 2013 Wrangler Unlimited shakes a lot around 75-80 (depending on head wind). Will this help? | No this won't help at all. You will need new hood latches, maybe metal ones. |
The hood on my 2013 Wrangler Unlimited shakes a lot around 75-80 (depending on head wind). Will this help? | It may deflect some of the wind, most certainly bugs & rocks. I would check all the bolts on the hood hinges to insure they are tight. |
Will these work with a Sony Bravia Television. | It works GREAT with ours. Set up in 5 minutes and now hard of hearing hubby has stopped saying "What did they say?" entirely. This is a FABULOUS product in every way. HIGHLY recommend! |
Will these work with a Sony Bravia Television. | It should work with the Sony Bravia according to everything I have read. Works great with my Samsung Smart TV! |
Is this can water tight ? | it has a rubber seal along the ridge of the top of the ammo can that should create a water tight seal when the lid is closed and locked in place - that being said these are not machined perfectly and hence I doubt they will be completely water tight |
Is this can water tight ? | I haven't put it under water but is seems to be air tight and will keep humidity out. |
Is this can water tight ? | I have four of them and they are pretty darn tight. Don't know if you left them fully submerged for an extended period of time they wouldn't leak but brand new I'm sure it could take a dunk or two with any problem. |
Is this can water tight ? | Yes! If purchased brand new, these ammo cans have a rubber seal around the inside of the lid making them water/air tight. However, if purchased in used condition, the seal may have been damaged or show the effects of wear and tear. In this case, the seal may be difficult to purchase for a replacement. |
This work with windows | No reason why it wouldn't. You can format it for the file system of your choice from within your OS. |
This work with windows | I use it with both Windows 7 64-bit and Windows 8 machines with no problem. |
does this fit bmw 650i | Don't even think of buying these LED's, they're the worst. No lumination at all. |
Autofocus work properly with Nikon D5300 camera? | Not sure about the 5300. but, I can say that it works fine on my NIKON D 90. |
Will this work for an iPad mini? | I'm not sure due to not having an iPad mini but I don't think it would because the corners that hold it in are not adjustable. So I'm sure it could hold it if u just lean it on it but it won't be secure. Hope this helps. |
When the tripod is folded for transport, what is the length and estimated width? | Approximate Length 1'-1.5' (feet) approximate Diameter (width) 4"-6" (inches) |
what are the dimensions of this cabinet | The dimensions are misleading in the description. Add about 4 inches to the width because the description lists the size of "box" part of the cabinet. The top is about two inches wider on each side of the cabinet |
I have a door that locks from the outside. During business hours, I need to keep it propped open so employees can enter as needed, but I don't want the door opened all the way, just enough to prevent it from closing and locking. I need a stopper that... | I use both of my wedge-its on my garage doors, which lock and open outward. The main reason I use the wedge-it is to keep the door open all-the-way, so that I can enter the garage without having to use my hands to open the door, and to keep it opened during gusts of wind that would otherwise slam my door shut. So, if you don't want the door opened all the way, the wedge-it is not for you! I would place a piece of wood inside the door frame near the hinges large enough to keep the door from closing all the way. Sounds simple, but it works. (I used a block of wood 4x1x.5 inches, and stood it up inside the door frame with the long side standing up.) Hope this works for you. And thanks for giving me the opportunity to use my noodle to figure stuff out! Don't you just love doing that? |
Will it fit with a case? I have a Speck candyshell | Yes, it actually has a little bit of leeway without a case. It's all made of neoprene and is really easy to make it fit. |
Can you tell me the EXACT dimensions? I need it to fit in a table frame that has an opening that is 47 1/2 inches wide by 83 1/2"long. | I wouldn't consider this mat at all: it is folded wrong way and get very wrinkled |
Does this contain Magnesium Stearate,or Silicon Dioxide? | I don't know the content of it, but I do know this pill is very effective to cure gout on my foot. As soon as I sense a gout is coming out, I just took three pills, and it calmed down the infection, then next day it felt normal. |
Does the handset have a speaker phone? | Yes. The speakerphone works very well. Be prepared for listeners to hear EVERYTHING going on in the background when they are on speaker phone. |
what additional parts are required to mount this to my 2002 Arctic Cat 500 4X4? | There is a plate that mounts to the bottom of your quad and then the plow base/push tube fastens to that with two pins. It might be called a base plate as I recall, I think. |
what additional parts are required to mount this to my 2002 Arctic Cat 500 4X4? | You will need the WARN 84354 ProVantage ATV Plow Mount Kit. However, the WARN 78100 ProVantage Plow Base/Push Tube Assembly will be WAAAAAAY to long since the mount is installed on the front end of your ATV. You will need the short version, WARN 92100 ProVantage Plow Base/Push Tube Assembly. Hope this helps. |
what additional parts are required to mount this to my 2002 Arctic Cat 500 4X4? | You will need a center mount kit specific to your machine. It appears a Warn 63294 is what you will need. (from the Warn website) |
what additional parts are required to mount this to my 2002 Arctic Cat 500 4X4? | You need a push tube mount. It's the mounting bracket that is specifically made for your make and model atv and stays permently mounted to your atv. |
Is the bottom flat for use on a glass cooktop? | It is flat, not sure if it works on glass, I'm not very familiar with those type of stoves |
Hi All,..what's the minimum of BTU needed for wok frying? Ty | It depends on what you are cooking and the size of the wok. I can use a 12.5k btu burner for a 12 inch wok but it is not optimal by any means, but it cooks. I agree that 35K would be reasonable for a 14" or bigger. This burner will strip the seasoning from a wok and make it glow when turned to high. If your wok is thin, burning will occur on high despite your efforts to prevent it. |
Hi All,..what's the minimum of BTU needed for wok frying? Ty | Probably around 40k or so to actually flip the food and get proper wok hei. This stove had more than enough power. |
I have 5 wired motion sensors a total of 19 wired sensors originally brinks security. 2 wired keypads. What other expansion cards to buy? | There is no need to buy another card as long as you have available zone. If not you have to buy an expansion card. You may need to know if you have enough power to support those 5 sensors. |
I have 5 wired motion sensors a total of 19 wired sensors originally brinks security. 2 wired keypads. What other expansion cards to buy? | Ademco Honeywell 4208U 8 Zone Universal Expander. You may check this out at amazon |
I have 5 wired motion sensors a total of 19 wired sensors originally brinks security. 2 wired keypads. What other expansion cards to buy? | The visita 21ip supports 1 fire zone and 7 hw zones without zone doubling. You can double zones 2-8 to allow you to support 1 fire zone and 14 Hw zones but they all need to be normal closed. Normally open zones cannot be doubled. In your case you have 3 options. 1) buy a 4219 or 4229 zone expansion modules. Both support 8 additional zones.2) combine zones to get within the limit of the base system |
I have 5 wired motion sensors a total of 19 wired sensors originally brinks security. 2 wired keypads. What other expansion cards to buy? | You can install a 4219. It connects to the panel in the keypad 4 wire bus & adds 8 additional wired zones to the panel. Add a second one fora total of 24 wired zones . |
In the description it says 20oz capacity. Just ordered them and these now say 16? Which are they because i use the 20? | I just poured 2 cups of water in them to be sure, and they are 16 oz. plenty big though. Love them. |
In the description it says 20oz capacity. Just ordered them and these now say 16? Which are they because i use the 20? | the correct capacity is 16 oz. i also was confused, but i measured it with a measuring cup, which is accurate, it comes out to 16 oz. |
In the description it says 20oz capacity. Just ordered them and these now say 16? Which are they because i use the 20? | I don't know what kind of measuring cup everyone else is using, but I just went and dug mine out, filled the cup to the rim and poured it into a 4 cup measuring cup and they are exactly 20 oz. I love them...plus, the double for cold beers or whatever other cold drink you like. Comes with recipe! |
i wana know the voltage of the charger base? 110V or 220V? | The plug cord is for 110v, However the base can be connected to 110V or 220V. |
can you help me, i need to kown that this product is halal ? | It does contain pork and beef. I called them and they said anything that contain Chondroitin Sulfate means it has pork and beef. |
How is the Dyson on hardwood floors? I'm under the impression there is not a way to manually turn off the rotating brush of the Dyson? | There is a seperate button to turn the brushbar on/off. It is by the power button. This model has two motors one for the suction and one for the brushbar. On earlier models there was only one motor to control both. It works great on bare floors! |
do they have micr ink for brother HL-2270dw | Not sure what your question is? This printer does not use ink, it uses toner. |
do they have micr ink for brother HL-2270dw | I've not found any MICR toner refill that *says* it will work in a TN450 (the type used in the hl-2270dw)... The only solution I've found is the rather expensive MICR toner cartridge Amazon lists here: Brother MICR Toner TN450 / TN-450 HL-2130 HL-2132 HL-2220 HL-2230 HL-2240 HL-2240D HL-2242 HL-2242D HL-2250DN HL-2270 HL-2270DW HL-2275DW HL-2280DW IntelliFax 2840 IntelliFax 2940 MFC-7240 MFC-7360N MFC-7365DN MFC-7460DN MFC-7860DW 2.6K MICR Toner Cartridge for Printing Checks. Prints 7,200 Checks. by MICR Toner Mart |
Are these stackable? | I think you could manage to stack two of them together. However, they are not made to be stacked. Hope this helps! |
It says imported - is this product made in China? | Hi if I am not misdated it's made in USA but our warehouse close now to double check thanks |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.