query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
my puppy is 8lb. will it work? | No.... I sent the product back as it poorly made. I could not get the collar open to insert battery. I partially destroyed it with tools and could still not get it open. |
my puppy is 8lb. will it work? | Yes it will but you may want to pay a little more for better quality. Ours worked great until it was time to change the batteries, then the whole unit fell apart -both pieces. |
my puppy is 8lb. will it work? | Our dog was about 15lbs and we had to put it as tight as it would get, so I think it might be to big. |
Will this mobo support an i3 2130 cpu | I checked the "CPU support List" on the Gigabyte site, and yes it will support the i3 2130 |
Will this mobo support an i3 2130 cpu | Yes it is supported.You can find the list of supported CPUs here http://www.gigabyte.us/support-downloads/cpu-support-popup.aspx?pid=4192 |
How much weight this product? | I got them formy daughter as a gift, she likes using glass over plastic and she loves them, they are not that heavy and stack really well. They don't seem heavy even when stacked for easy storage. |
The only things I need:- 'Are spares readily available? What is the temperature range and has it a range of flat/chisel tips'? I don't see these?. | Spares readily available. Hakko is large company been in business 50+ years. Temp range is 120° to 900°. Gazillion tips available. Search "hakko t18 tip" on amazon. Look at hakko website for complete list. |
The only things I need:- 'Are spares readily available? What is the temperature range and has it a range of flat/chisel tips'? I don't see these?. | Spares readily available. Hakko is large company been in business 50+ years. Temp range is 120 to 900. Gazillion tips available. Search "hakko t18 tip" on amazon. Look at hakko website for complete list. |
The only things I need:- 'Are spares readily available? What is the temperature range and has it a range of flat/chisel tips'? I don't see these?. | There are tons of high quality tips available, check the Hakko web site here: http://www.hakko.com/english/products/hakko_fx888d_tips.html#productNav As for temp range this unit is variable and will answer all your needs. The only units better cost hundreds more. I love my unit which I use for guitar mods from light heat wire solders to high heat soldering to the back of potentiometers. No worries and plenty of options with the Hakko fx-888. |
Will this fit a Men's Sierra 2? | Since the Sierra 2 has a 26" frame the rear folding rack should fit. It will attach to the rear wheel bolt and the adjustment for the seat height |
Will this fit a Men's Sierra 2? | I would think it will, it has a lot of adjustments to fit most bikes. It's a really nice rack, would definitely recommend it. |
Will this fit a Men's Sierra 2? | Not sure, but I would think so. Most bike parts are universal fit. It fit a Giant with some difficulty, and fit a Schwinn perfectly. |
Will this fit a Men's Sierra 2? | I am not familiar with the geometry of the Sierra 2, but this rack has so many adjustments, I would imagine it will fit practically any bike. |
How do you know which size you would need? | I just googled it but couldn't find much information so I went with the average size and it worked. |
How do you know which size you would need? | Go to Medela website for more info. Honestly I have 3sizes and use them all. My son is 8months old and I've used it every day since he was a week old |
How do you know which size you would need? | My lactation consultant told me that almost everyone is 24mm. I tried going down a size and it was incredibly uncomfortable. Its always worth asking your lactation consultant if you're unsure. |
How do you know which size you would need? | It's hard to determine size without an actual shield. I would recommend buying the standard (24mm), and then checking it against this guide (that is what I did), and then see if you need to return it for a different size. http://www.medela.com/IW/en/breastfeeding/good-to-know/right-size-of-breastshield.html |
Is the jar plastic or glass? | A very high quality plastic. We have had ours for over a year and have no scratches or dulling. If you clean it right after use, per the instructions you have hardly any scrubbing to do. Just a warm water rinse and dry. |
Is the jar plastic or glass? | The container is a type of plastic. I will say this is the best blender I have ever had and I love it |
Is this also a fax machine | Yes, it can send and receive faxes, tho I only use it to send. I'm on my second MP830, the first one worked perfectly for 6 yrs, until a rubber band popped into the feed mechanism, unbeknownst. |
Is this also a fax machine | It has fax capability (send/receive) though I wouldn't call it a "fax machine." Dedicated fax machines typically have a lot more fax-specific features you won't find on any multi-function machine. If you want to occasionally send or receive a fax, this will do just fine. |
Is this also a fax machine | Yes it's got a phone jack and works for sending or receiving faxes. I do think it wouldn't fax a double sided document (it only faxed it single sided skipping every other page) which really frustrated me at one point since it will scan double sided documents. |
Is this also a fax machine | Yes, it is also a fax. I have never used the fax feature so I can't speak to it's utility as a fax, but the machine is a printer/scanner/copier/fax. It has always worked very well and I have no complaints except that it has a voracious appetite for ink. |
Is this also a fax machine | It is also a fax machine. Bad product. Difficult to use Dont buy it. It gulps ink. Expensive ink you can only get from canon. |
Do this product has "+tax" at the end of price? | Unfortunately this listing does not include a real Monarch part No. so it is a guess what you will receive. I sell these labelers and my default model I sell is the 1131-01 (Monarch part no. 113101) The 1131-01 does have a "+tx" option in the last print band. The Monarch 1131-01, 1131-02, 1131-03 and the 1131-09 all have the +tx in the last print band but all have different band configurations. I sell the 1131-01 because customers find it to be the most useful print band configuration for general pricing situations. I recommend you search for a listing for the Monarch 1131-01 which displays a picture of the print band configuration so you know exactly what you are getting. Unfortunately this listing does not include a real Monarch part No. so it is a guess what you will receive. I sell these labelers and my default model I sell is the 1131-01 (Monarch part no. 113101) The 1131-01 does have a "+tx" option in the last print band. The Monarch 1131-01, 1131-02, 1131-03 and the 1131-09 all have the +tx in the last print band but all have different band configurations. I sell the 1131-01 because customers find it to be the most useful print band configuration for general pricing situations. I recommend you search for a listing for the Monarch 1131-01... » Read More Unfortunately this listing does not include a real Monarch part No. so it is a guess what you will receive. I sell these labelers and my default model I sell is the 1131-01 (Monarch part no. 113101) The 1131-01 does have a "+tx" option in the last print band. The Monarch 1131-01, 1131-02, 1131-03 and the 1131-09 all have the +tx in the last print band but all have different band configurations. I sell the 1131-01 because customers find it to be the most useful print band configuration for general pricing situations. I recommend you search for a listing for the Monarch 1131-01 which displays a picture of the print band configuration so you know exactly what you are getting. « Show Less |
This phone is unlocked friend | The Sprint Evo is a wonderful phone. If you are having some problems please call Sprint! They can help you with any problems with the phone. |
Is the item large size? last time by mistake i bought the same item in small size and have to return it. Can you please confirm? | Hi, I bought this item. Make sure that the model is listed as CTH 661. If it is, the total size of the tablet is 9"x13.5". The drawing area is about 5.5" x 9". Big enough for my digital painting needs, and I have 2 monitors side-by-side. I hope this helps. Cheers! |
Is the item large size? last time by mistake i bought the same item in small size and have to return it. Can you please confirm? | My apologies that this took so long, if you're still interested in know, this item has a drawing surface roughly 8.5 by 11 inches in size (about the size of computer paper). and then it has an outside edge. It is not a small tablet by any means. |
Is the item large size? last time by mistake i bought the same item in small size and have to return it. Can you please confirm? | I would suggest to check the dimensions listed to see for yourself if it meets your needs. This particular tablet is a middle of the road "medium size" if you ask me. I can lay a sheet of copy paper over the entire surface and the drawing surface is, indeed, somewhat smaller. But a lot can still be done with it. I'd call it a good tablet at a fair price. I'd buy it again if the need should arise. |
Will this fit Singer 8780 Curvy sewing machine? | I looked at your machine online, and it appears that it would fit based on the type of shank you have and the feet available for it. If it doesn't, Amazon is very good about returning an item that doesn't work. |
Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying... » Read More Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. « Show Less | Thanks - I'll try it (may be worth upgrading to their pro version if it really works). |
Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying... » Read More Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. « Show Less | I've been wondering the same thing. When i try to import videos from the camera to windows movie maker it says they are in the wrong format. |
Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying... » Read More Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. « Show Less | JVC MOD files open perfectly in Nero Vision. Renaming them to MPG for me caused them not to play correctly in WMP (and no sound), and they would not open in Quicktime Pro. Bad choice by JVC. |
Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying... » Read More Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. « Show Less | I have a JVC mg555, and I just changed a vid file ext to .mpg.WMM imports it, but is not reading the video part only audio. Weird. I am still working on it. |
Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying... » Read More Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. « Show Less | There is a free program called Prism Video conversion. Put the MOD file into it and out comes a MPG to play with.Here is the link to their site.http://www.nchsoftware.com/prism/index.html |
Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying... » Read More Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. « Show Less | I just read that the .MOD extension of the JVC can be changed to .MPG for recognition by Windows Media Player and should work with other software since it is a standard format. (You can do this by copying the file onto your PC, right clicking and renaming. With this extension you should be able to burn to a DVD. I am interested in purchasing this camcorder but will NOT do so if I have to purchase extra software. If someone tries this, please let me know if you are successful. JVC appears to receive much better reviews than Sony other than the burning issues. The article I read can be found at http://www.usatoday.com/tech/products/2006-12-06-camcorder-hard-drives_x.htm. I just read that the .MOD extension of the JVC can be changed to .MPG for recognition by Windows Media Player and should work with other software since it is a standard format. (You can do this by copying the file onto your PC, right clicking and renaming. With this extension you should be able to burn to a DVD. I am interested in purchasing this camcorder but will NOT do so if I have to purchase extra software. If someone tries this, please let me know if you are successful. JVC appears to receive much better reviews than Sony other than the burning issues. The article I read can be found... » Read More I just read that the .MOD extension of the JVC can be changed to .MPG for recognition by Windows Media Player and should work with other software since it is a standard format. (You can do this by copying the file onto your PC, right clicking and renaming. With this extension you should be able to burn to a DVD. I am interested in purchasing this camcorder but will NOT do so if I have to purchase extra software. If someone tries this, please let me know if you are successful. JVC appears to receive much better reviews than Sony other than the burning issues. The article I read can be found at http://www.usatoday.com/tech/products/2006-12-06-camcorder-hard-drives_x.htm. « Show Less |
Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying... » Read More Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. « Show Less | I use Windows Movie Maker exclusively with my camera, and have had NO issues whatsoever with importing the files, or editing of the files using this software. It may not show up in the folder as a "media" file, but if you check all files, then you are able to import the raw video and edit away. Took me maybe 15 minutes to edit my first video with this camera and software. |
entry level portable gps: Seems like MIO's ability to set multi waypoints is a distinguishing characteristic that others don't have.. and that's how most of us travel locally, right? | I'm surprised no one has given you a suggestion. On the off chance you are still looking, I'll add a comment or two. Obviously, any of the units you have listed "could" do the job very well (I've heard good and bad things about each of them). Multiple routing (which my unit doesn't have) would be very nice to have if it's implemented properly. I originally wanted the Magellan because I liked its features better than the others (especially the AAA feature), but didn't want to take a chance (their customer support is terrible). And any unit that allows you to exclude/avoid a road is a good one to get. The Nuvi 200 really is a basic unit and has no Text-to-Speech (which I prefer even though some names are butchered). The 200 also comes with only the lower 48 states (adding Canada can get very expensive), so I would suggest the 250 or 260 (the 260 has TTS). The newer 260W (wide-screen) is probably priced too high right now. As far as ease of use, they all work similarly, but Garmins are probably the easiest and most logical (with Magellan a close second). TomTom will give you many more customizable options, plus has Mapshare (a really great idea). No matter what you decide to get, I'm sure you will be pleased. Just remember that they all have various quirks (even the big, expensive models). |
Can this phone be used internationally, in Europe and Africa and is it tethered capable? | The best way to check is to find out the band-width in those continents you mentioned. Since this phone is Quadband, so I would assume it should work anyplace. At least, it works in both Asia and America. |
Why is this Shea butter color yellow not Ivory?Is there any differences between yellow and ivory colored Shea butter? | The yellow is at its purest and natural state. Where as the white has be altered which means its not at its purest or natural state. |
Is the mop pad reusable? | The swiffer is reusable. The swiffer wifes must be discarded after each use. |
Is the mop pad reusable? | There is a rubber mop head that the mop sheets attach to. The mop sheets are single use but the mop head doesn't need to be replaced (maybe it would with heavy use). However, you don't "mop" without the disposable part. |
Would this work as a piano light? | Not sure what to say. My initial reaction would be that's it's too high. I don't see it working with an upright. If you're talking about a keyboard or a grand then perhaps. Take into account the size of the base. I would think it would be too bright. It's an excellent light. I use them constantly. But I don't think I would buy it to use with a piano. Sorry I can't be more definite. Does Softech have a website that could offer more info? |
Should I seal this if I get it? TIA! | I would! I've had mine for about a year and it gets wet every day. It is starting to show mildew. If yours will be getting wet every day, sealing it would be a good idea. It's a good product but I didn't think bamboo would mildew for some reason. |
Should I seal this if I get it? TIA! | I didn't seal it and it's holding up just fine! No visible wear and tear. :) |
Should I seal this if I get it? TIA! | You can it probably wouldn't hurt. I didn't and it is holding up just fine. |
i want to use this to extend a dazzle's usb cord to my pc,would this work? plz reply | I believe it should, but I'm not too sure what a dazzle usb cord is. I use this to extend my xbox 360 controller pc dongle to the couch (about 5 feet away) and it works well. I can play pc games on my big screen television. |
How do you fold the handle straight to use it? | There's no button or release for folding the dryer. Your left hand grabs the side where the air comes out, and your right hand grabs the handle. Then, you just push the two sides toward each other. There's a fairly solid click in doing so. |
How do you fold the handle straight to use it? | Between the main head of the hairdryer and the handle with the cord, it folds and opens with a click. When folded, the handle rests on the underside of the main head (blower part) of the hairdryer. Very easy. |
is there a trick to getting the bulb out when it needs replacing? | no trick really, you just have to be brave! with the lamp unplugged , pull straight out on the bulb, keeping it flat against the lamp shade there is not much clearance and I am always afraid the glass will shatter, but it never has. good luck! |
is there a trick to getting the bulb out when it needs replacing? | Be sure to unplug lamp and let bulb cool down. I use one of those garden gloves with little plastic dots to get a better grip on bulb:-) The directions read like this. "Grasp the tube firmly, angle it very slightly down, then pull it from socket." Mostly it is a matter of a firm grip. |
is there a trick to getting the bulb out when it needs replacing? | Actually haven't had a problem with that. My bulb tends to fall out when you close it up, so I open it carefully |
is there a trick to getting the bulb out when it needs replacing? | I remember just being very careful by holding the two bulbs securely and then pulling straight out (the pair of tubes are attached if I remember correctly.) I still have my old one, but I replaced it with the new model and haven't tried the old one again. It works fine though. It's a great light. I am very pleased with both of them. Good luck to you. You can do it!!! It's a great desk light -- BOTH of them are. |
is there a trick to getting the bulb out when it needs replacing? | Umm, not really! You have to gently pull it out, then gently push it back in! If I could put my hand on my replacement build with instructions, I would tell you for sure! Now I've got to look for it! lol Make sure you unplug it first for safety! Hope this helps! Good luck! |
is there a trick to getting the bulb out when it needs replacing? | Umm, not really! You have to gently pull it out, then gently push it back in!If I could put my hand on my replacement build with instructions, I would tell you for sure! Now I've got to look for it! lolMake sure you unplug it first for safety!Hope this helps!Good luck! |
is there a trick to getting the bulb out when it needs replacing? | Not that I know of. I simply just pulled it out, but after it had cooled down. |
Is there much of a difference from this card to the GTX 650 Ti Boost 1gb superclocked? | Are you trying to compare this EVGA with the MSI power edition??? If this is OK then choose MSI with eyes closed, it's better. If I'm wrong, I can't help you jejeje maybe this page can help you, but I think it will no answer your question. http://www.videocardbenchmark.net/high_end_gpus.html |
the threads are on the inside of my faucet when I stick my finger up in it. will it work on my faucet? is a screen on other end? | Yes threads on the faucet would need to be on the inside. Diameter of threads is around 3/4 of an inch. So if your faucet has a real small thread it won't fit. I bought this product a couple months ago it's pretty cool. Great for kids but it also works like a night light when you turn the water on its pretty bright |
the threads are on the inside of my faucet when I stick my finger up in it. will it work on my faucet? is a screen on other end? | Making sure you realize, I am NOT the seller of this item. But faucet add-ons are all similar. Un-screw the old piece. Should only be half inch to inch max in height. There will be threads on the inside of the faucet (where the water comes out). There will be threads on the outside of the attachment. Simply screw it in once the original faucet piece is off. |
the threads are on the inside of my faucet when I stick my finger up in it. will it work on my faucet? is a screen on other end? | yes. You have to remove the other tiny one- it's super small- and then it screws in. And yes- there is a screen on the end where the water comes out. :D I have the one that came as one single piece- I see there are a couple of 'versions'. |
the threads are on the inside of my faucet when I stick my finger up in it. will it work on my faucet? is a screen on other end? | yes it has its own screen, but it is on the end that threads into ur faucet. This product comes with a rubber washer, so if the threads do not match perfectly, it should still work if you tighten it enough for the rubber washer to make contact. |
the threads are on the inside of my faucet when I stick my finger up in it. will it work on my faucet? is a screen on other end? | It is designed for a faucet like yours with inside threads. However it only fits one size. Most American faucet sprays come with thread adapters to accommodate different size threads. I was lucky, it fit both of my faucets. If you get it and it fits your faucet, make sure you use some pipe dope on the threads and tighten securely to prevent small drips. It works as advertized and my grandchildren think that they are "neat". |
the threads are on the inside of my faucet when I stick my finger up in it. will it work on my faucet? is a screen on other end? | Yes it should work with yours then. Yes it has a screen close to the top where it screws into the faucet. |
Description mentions Tilt locking head, however it dies not say if the head is detachable, can you please let me know? | I have never detached the tilt locking head and I will be afraid that I will not be able to put it back together. It happened prior to this new mixture. So, I suggest that you get the hand mixture. Thank you. |
Description mentions Tilt locking head, however it dies not say if the head is detachable, can you please let me know? | http://www.sunbeam.com/kitchen-appliances/mixers/stand-mixers/002591-000-000.html#start=16&sz;=12 |
Description mentions Tilt locking head, however it dies not say if the head is detachable, can you please let me know? | Yes, Gustavo, the head is detachable. Sorry for the delay in responding to you. |
Is the random setting truly random? | not really. Every time you turn the frame on, the random setting follows the same order which is different from the normal order but it always stays the same. |
Is the random setting truly random? | It appears random to me. We put in a bunch of "special events and holiday" photos and they will show a kindergarten graduation followed by Santa Claus and then a child's play. |
how long do the batteries last at a decent high volume? | Not sure. I used it on/off for 4 hours. It last longer than my cell phone battery used as the music source. |
Where are these made? | Can not tell ya, I can't find out the information about "where they are made" on Vortex website. They are in south central Wisconsin. Call them and ask (800) 426-0048 I have used there products for a long time and they are one of the best; especially with their absolute no-hassle warranty policy--it breaks they fix it or replace it. |
Where are these made? | China I believe. I can tell you that I was happy happy with the mount and would buy it again. Some people think it's over priced. |
Where are these made? | It depends on the item. Vortex makes some things in Japan, China, and Philippines. All the designing, engineering and quality control are done in Wisconsin. They are a small company and they will answer the phone and answer questions too (800-426-0048). I bought a scope and a ring mount from them. The scope was made in Japan and the ring mount was made in China. I've not had to tighten the mount a single time after 7 months and about 400 rounds through my AR. |
Where are these made? | They are made in China but like other reviewers advise they are good quality, good value for money and wont break the bank! sure there are better options out there but hey that's with pretty much everything else in life, if your on the fence pull the trigger you would no be disappointed unless your a tear one operator! :) |
Where are these made? | Sad but true China, states it right on the box. If it were USA, you would pay 50% more. The quality is good. This is my second unit. Good luck. |
Where are these made? | Can not tell ya, I can't find out the information about "where they are made" on Vortex website. They are in south central Wisconsin. Call them and ask (800) 426-0048I have used there products for a long time and they are one of the best; especially with their absolute no-hassle warranty policy--it breaks they fix it or replace it. |
Hi, how is the mattress supported - are there slats, and if yes, how many? THANK you all! | There are two solid boards that run the full length and width of the mattress - it is as if it sits on a raised platform, above the drawers. |
Hi, how is the mattress supported - are there slats, and if yes, how many? THANK you all! | The mattress is supported by flat boards. I think they call them bunk boards. these boards are attached to the frame with wood screws and for the most part keeps movement on the bed quiet. There are still some movement noises, but attaching the boards does quiet it a lot. |
Hi, how is the mattress supported - are there slats, and if yes, how many? THANK you all! | Trying to remember. But I do believe there is a compressed board that is in sections but does completely cover the mattress base. The drawers are cheaply made and didn't last though :-( |
does the Greenway filtration system fit on a Clover dispenser? | I don't own the Clover dispenser, so I am not sure. From my opinion, the would be fine, the dispenser top loader should be standard. I am using the Aquverse dispense I bought at Costco. Having using Greenway filtration for 2 years now. I am very happy with it. |
does the Greenway filtration system fit on a Clover dispenser? | I don't know if it will or not I use it with a Greenway Water Dispenser Filtration System and the water is out of this world. |
does the Greenway filtration system fit on a Clover dispenser? | If a 5 gallon jug fits it, if its open. Not sure about cabinet type, but it's the size of a five gallon jug Check (the height mine is 15" TALL). I love mine. |
Why does this cost more than the Browning BR-1030-UHF 3-5/8 NMO mag mount? Is there a difference between them? | There doesn't appear to be much difference besides the finish, I would by the cheaper of the two. I have used these bases for VHF-low, VHF and UHF Ham Radio with no complaints! |
Platform - XP - what about Vista: Just bought new computer with Vista...will this program work with it? | I have VISTA and downloaded the trial version from Microsoft and it works fine. |
is it easy to clean? how long does it take to clean (in minutes)? | Some people on here are saying clean up is a 2 minute rinse and that is simply not true, unless they don't care about cleanliness. If you actually want to scrub your filter to be free of food particles (my definition of clean), it's going to take 5 minutes minimum, and that includes cleaning the auger, the restrictor, and the screen, as well as any food that was pushed out the wrong end up against the base of the motor. |
is it easy to clean? how long does it take to clean (in minutes)? | About 2 to 3 minutes..Really very easy to take apart and put back together.Great machine.. |
is it easy to clean? how long does it take to clean (in minutes)? | I use it EVERY day. It takes me under 3-4 min to disassemble, rinse and reassemble for next use. Easy. No trouble. Love this machine. |
is it easy to clean? how long does it take to clean (in minutes)? | Clean up is simple, easy and takes less than five minutes. Just pop off the attachments, rinse, place in soap and water, drain and they are ready for the next juicing. |
is it easy to clean? how long does it take to clean (in minutes)? | Cleaning is really kind of a pain with most juicers. I tend to make a lot and freeze some in individual servings because the clean up is kind of a pain. |
is it easy to clean? how long does it take to clean (in minutes)? | very easy to clean just soak in cold soapy water, rinse with cold water clean the screen with a dishcloth. |
is it easy to clean? how long does it take to clean (in minutes)? | It doesn't take long. I would say 2 minutes. Parts come off very easily and just wash them under lukewarm water. Brush the screen/filter for 15 seconds. We use this machine almost everyday. |
is it easy to clean? how long does it take to clean (in minutes)? | It is very easy to clean and disassemble and assemble back. It takes about 3-4 minutes to disassemble and clean. I would totally recommend buying this juicer. |
is it easy to clean? how long does it take to clean (in minutes)? | I would not recommend this for any green juices. I had a Green Power Twin Gear Juicer that was lost in our move and it was much better. It is ok for fruit juicing only - even with the Greens attatchment it is not as good as the Green Power. |
i didnt get a user manual. is there a user manual online? | You can use any android Manual because all it talks about is basic stuff nothing indept. |
Will it worth with mighty mite 1342053770 | Honestly, I don't know. My vacuum model was called "the Boss" and it fit perfectly. It is a better hose than the original that came with my vacuum. The Mighty Mite looks like my Boss. If your vacuum uses the MM bags, it should fit. |
Will these fit over the regular floor mats? Or do you have to remove the regular floor mats to install these? | I put them over the regular floor mats with no problem. The front mats are a little tight to clip in, but they stay in place. I bought these for my wife's G35 and she loves them...even though they have the G37 emblem on them. Do not attempt to clean these with a pressure washer. Since they scuffed up fairly easy from black heeled shoes, i thought using a pressure washer with a 40 degree head would clean them quickly. It did, and unless you are extremely careful, the water pressure will leave cut marks. Use a brush and a little elbow grease instead. They clean nicely. |
Will these fit over the regular floor mats? Or do you have to remove the regular floor mats to install these? | The front ones can fit over the regular floor mats but they are so thick that you can't really have them clip in. The back ones obviously aren't a problem. The color also isnt as off as others have said. These mats are currently saving my cars lighy interior! |
Will these fit over the regular floor mats? Or do you have to remove the regular floor mats to install these? | You would remove the original rug type mats. These are more wet, sloppy weather mats. Very heavy duty/thick mats that use the same snap holes as the original. The rubber mats have a slight satin texture that is somewhat difficult to clean dirt off. I changed out the mats during the rainy season or when I take the car to the shop for work so the nice rug mats don't get trashed. |
Will these fit over the regular floor mats? Or do you have to remove the regular floor mats to install these? | The manuf. SUGGESTS that they NOT be placed over the regular "carpet" mats. But I have them installed right over the regular mats and they fit. It's a hair "tight" to get the floor posts through all of the holes -- but you can do it with a minimum of effort. I think it's safe enough. I really LIKE these rubber mats.Good luck! |
sizing - how is it done | Palm width(7-8) SIZE M Palm width(8-9) SIZE L Palm width(9-10) SIZE XL Palm width(10-11) SIZE XXL HOPE IT IS HELPFUL |
sizing - how is it done | Before my purchase of these gloves I read the reviews, particularly the review that mentioned the size issue. With that in mind, I ordered XL instead of L and they fit perfectly! What you must keep in mind is that these gloves ARE made in CHINA, so you never know what you will receive. I must say that the retailer gets the product out to you as though he were in the states. Take the chance, you will not regret it. Hope this helps. Johnny D |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.