instruction
stringclasses 1
value | input
stringlengths 306
235k
| output
stringclasses 3
values | __index_level_0__
int64 165k
175k
|
|---|---|---|---|
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static struct sk_buff *xfrm_state_netlink(struct sk_buff *in_skb,
struct xfrm_state *x, u32 seq)
{
struct xfrm_dump_info info;
struct sk_buff *skb;
skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
if (!skb)
return ERR_PTR(-ENOMEM);
info.in_skb = in_skb;
info.out_skb = skb;
info.nlmsg_seq = seq;
info.nlmsg_flags = 0;
if (dump_one_state(x, 0, &info)) {
kfree_skb(skb);
return NULL;
}
return skb;
}
Vulnerability Type: DoS +Priv
CWE ID:
Summary: The xfrm_state_netlink function in net/xfrm/xfrm_user.c in the Linux kernel before 3.5.7 does not properly handle error conditions in dump_one_state function calls, which allows local users to gain privileges or cause a denial of service (NULL pointer dereference and system crash) by leveraging the CAP_NET_ADMIN capability.
Commit Message: xfrm_user: return error pointer instead of NULL
When dump_one_state() returns an error, e.g. because of a too small
buffer to dump the whole xfrm state, xfrm_state_netlink() returns NULL
instead of an error pointer. But its callers expect an error pointer
and therefore continue to operate on a NULL skbuff.
This could lead to a privilege escalation (execution of user code in
kernel context) if the attacker has CAP_NET_ADMIN and is able to map
address 0.
Signed-off-by: Mathias Krause <[email protected]>
Acked-by: Steffen Klassert <[email protected]>
Signed-off-by: David S. Miller <[email protected]> | Medium | 166,112 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen, unsigned int flags)
{
struct ipv6_pinfo *np = inet6_sk(sk);
int len;
int val;
if (ip6_mroute_opt(optname))
return ip6_mroute_getsockopt(sk, optname, optval, optlen);
if (get_user(len, optlen))
return -EFAULT;
switch (optname) {
case IPV6_ADDRFORM:
if (sk->sk_protocol != IPPROTO_UDP &&
sk->sk_protocol != IPPROTO_UDPLITE &&
sk->sk_protocol != IPPROTO_TCP)
return -ENOPROTOOPT;
if (sk->sk_state != TCP_ESTABLISHED)
return -ENOTCONN;
val = sk->sk_family;
break;
case MCAST_MSFILTER:
{
struct group_filter gsf;
int err;
if (len < GROUP_FILTER_SIZE(0))
return -EINVAL;
if (copy_from_user(&gsf, optval, GROUP_FILTER_SIZE(0)))
return -EFAULT;
if (gsf.gf_group.ss_family != AF_INET6)
return -EADDRNOTAVAIL;
lock_sock(sk);
err = ip6_mc_msfget(sk, &gsf,
(struct group_filter __user *)optval, optlen);
release_sock(sk);
return err;
}
case IPV6_2292PKTOPTIONS:
{
struct msghdr msg;
struct sk_buff *skb;
if (sk->sk_type != SOCK_STREAM)
return -ENOPROTOOPT;
msg.msg_control = optval;
msg.msg_controllen = len;
msg.msg_flags = flags;
lock_sock(sk);
skb = np->pktoptions;
if (skb)
ip6_datagram_recv_ctl(sk, &msg, skb);
release_sock(sk);
if (!skb) {
if (np->rxopt.bits.rxinfo) {
struct in6_pktinfo src_info;
src_info.ipi6_ifindex = np->mcast_oif ? np->mcast_oif :
np->sticky_pktinfo.ipi6_ifindex;
src_info.ipi6_addr = np->mcast_oif ? sk->sk_v6_daddr : np->sticky_pktinfo.ipi6_addr;
put_cmsg(&msg, SOL_IPV6, IPV6_PKTINFO, sizeof(src_info), &src_info);
}
if (np->rxopt.bits.rxhlim) {
int hlim = np->mcast_hops;
put_cmsg(&msg, SOL_IPV6, IPV6_HOPLIMIT, sizeof(hlim), &hlim);
}
if (np->rxopt.bits.rxtclass) {
int tclass = (int)ip6_tclass(np->rcv_flowinfo);
put_cmsg(&msg, SOL_IPV6, IPV6_TCLASS, sizeof(tclass), &tclass);
}
if (np->rxopt.bits.rxoinfo) {
struct in6_pktinfo src_info;
src_info.ipi6_ifindex = np->mcast_oif ? np->mcast_oif :
np->sticky_pktinfo.ipi6_ifindex;
src_info.ipi6_addr = np->mcast_oif ? sk->sk_v6_daddr :
np->sticky_pktinfo.ipi6_addr;
put_cmsg(&msg, SOL_IPV6, IPV6_2292PKTINFO, sizeof(src_info), &src_info);
}
if (np->rxopt.bits.rxohlim) {
int hlim = np->mcast_hops;
put_cmsg(&msg, SOL_IPV6, IPV6_2292HOPLIMIT, sizeof(hlim), &hlim);
}
if (np->rxopt.bits.rxflow) {
__be32 flowinfo = np->rcv_flowinfo;
put_cmsg(&msg, SOL_IPV6, IPV6_FLOWINFO, sizeof(flowinfo), &flowinfo);
}
}
len -= msg.msg_controllen;
return put_user(len, optlen);
}
case IPV6_MTU:
{
struct dst_entry *dst;
val = 0;
rcu_read_lock();
dst = __sk_dst_get(sk);
if (dst)
val = dst_mtu(dst);
rcu_read_unlock();
if (!val)
return -ENOTCONN;
break;
}
case IPV6_V6ONLY:
val = sk->sk_ipv6only;
break;
case IPV6_RECVPKTINFO:
val = np->rxopt.bits.rxinfo;
break;
case IPV6_2292PKTINFO:
val = np->rxopt.bits.rxoinfo;
break;
case IPV6_RECVHOPLIMIT:
val = np->rxopt.bits.rxhlim;
break;
case IPV6_2292HOPLIMIT:
val = np->rxopt.bits.rxohlim;
break;
case IPV6_RECVRTHDR:
val = np->rxopt.bits.srcrt;
break;
case IPV6_2292RTHDR:
val = np->rxopt.bits.osrcrt;
break;
case IPV6_HOPOPTS:
case IPV6_RTHDRDSTOPTS:
case IPV6_RTHDR:
case IPV6_DSTOPTS:
{
lock_sock(sk);
len = ipv6_getsockopt_sticky(sk, np->opt,
optname, optval, len);
release_sock(sk);
/* check if ipv6_getsockopt_sticky() returns err code */
if (len < 0)
return len;
return put_user(len, optlen);
}
case IPV6_RECVHOPOPTS:
val = np->rxopt.bits.hopopts;
break;
case IPV6_2292HOPOPTS:
val = np->rxopt.bits.ohopopts;
break;
case IPV6_RECVDSTOPTS:
val = np->rxopt.bits.dstopts;
break;
case IPV6_2292DSTOPTS:
val = np->rxopt.bits.odstopts;
break;
case IPV6_TCLASS:
val = np->tclass;
break;
case IPV6_RECVTCLASS:
val = np->rxopt.bits.rxtclass;
break;
case IPV6_FLOWINFO:
val = np->rxopt.bits.rxflow;
break;
case IPV6_RECVPATHMTU:
val = np->rxopt.bits.rxpmtu;
break;
case IPV6_PATHMTU:
{
struct dst_entry *dst;
struct ip6_mtuinfo mtuinfo;
if (len < sizeof(mtuinfo))
return -EINVAL;
len = sizeof(mtuinfo);
memset(&mtuinfo, 0, sizeof(mtuinfo));
rcu_read_lock();
dst = __sk_dst_get(sk);
if (dst)
mtuinfo.ip6m_mtu = dst_mtu(dst);
rcu_read_unlock();
if (!mtuinfo.ip6m_mtu)
return -ENOTCONN;
if (put_user(len, optlen))
return -EFAULT;
if (copy_to_user(optval, &mtuinfo, len))
return -EFAULT;
return 0;
}
case IPV6_TRANSPARENT:
val = inet_sk(sk)->transparent;
break;
case IPV6_RECVORIGDSTADDR:
val = np->rxopt.bits.rxorigdstaddr;
break;
case IPV6_UNICAST_HOPS:
case IPV6_MULTICAST_HOPS:
{
struct dst_entry *dst;
if (optname == IPV6_UNICAST_HOPS)
val = np->hop_limit;
else
val = np->mcast_hops;
if (val < 0) {
rcu_read_lock();
dst = __sk_dst_get(sk);
if (dst)
val = ip6_dst_hoplimit(dst);
rcu_read_unlock();
}
if (val < 0)
val = sock_net(sk)->ipv6.devconf_all->hop_limit;
break;
}
case IPV6_MULTICAST_LOOP:
val = np->mc_loop;
break;
case IPV6_MULTICAST_IF:
val = np->mcast_oif;
break;
case IPV6_UNICAST_IF:
val = (__force int)htonl((__u32) np->ucast_oif);
break;
case IPV6_MTU_DISCOVER:
val = np->pmtudisc;
break;
case IPV6_RECVERR:
val = np->recverr;
break;
case IPV6_FLOWINFO_SEND:
val = np->sndflow;
break;
case IPV6_FLOWLABEL_MGR:
{
struct in6_flowlabel_req freq;
int flags;
if (len < sizeof(freq))
return -EINVAL;
if (copy_from_user(&freq, optval, sizeof(freq)))
return -EFAULT;
if (freq.flr_action != IPV6_FL_A_GET)
return -EINVAL;
len = sizeof(freq);
flags = freq.flr_flags;
memset(&freq, 0, sizeof(freq));
val = ipv6_flowlabel_opt_get(sk, &freq, flags);
if (val < 0)
return val;
if (put_user(len, optlen))
return -EFAULT;
if (copy_to_user(optval, &freq, len))
return -EFAULT;
return 0;
}
case IPV6_ADDR_PREFERENCES:
val = 0;
if (np->srcprefs & IPV6_PREFER_SRC_TMP)
val |= IPV6_PREFER_SRC_TMP;
else if (np->srcprefs & IPV6_PREFER_SRC_PUBLIC)
val |= IPV6_PREFER_SRC_PUBLIC;
else {
/* XXX: should we return system default? */
val |= IPV6_PREFER_SRC_PUBTMP_DEFAULT;
}
if (np->srcprefs & IPV6_PREFER_SRC_COA)
val |= IPV6_PREFER_SRC_COA;
else
val |= IPV6_PREFER_SRC_HOME;
break;
case IPV6_MINHOPCOUNT:
val = np->min_hopcount;
break;
case IPV6_DONTFRAG:
val = np->dontfrag;
break;
case IPV6_AUTOFLOWLABEL:
val = np->autoflowlabel;
break;
default:
return -ENOPROTOOPT;
}
len = min_t(unsigned int, sizeof(int), len);
if (put_user(len, optlen))
return -EFAULT;
if (copy_to_user(optval, &val, len))
return -EFAULT;
return 0;
}
Vulnerability Type: DoS +Priv
CWE ID: CWE-416
Summary: The IPv6 stack in the Linux kernel before 4.3.3 mishandles options data, which allows local users to gain privileges or cause a denial of service (use-after-free and system crash) via a crafted sendmsg system call.
Commit Message: ipv6: add complete rcu protection around np->opt
This patch addresses multiple problems :
UDP/RAW sendmsg() need to get a stable struct ipv6_txoptions
while socket is not locked : Other threads can change np->opt
concurrently. Dmitry posted a syzkaller
(http://github.com/google/syzkaller) program desmonstrating
use-after-free.
Starting with TCP/DCCP lockless listeners, tcp_v6_syn_recv_sock()
and dccp_v6_request_recv_sock() also need to use RCU protection
to dereference np->opt once (before calling ipv6_dup_options())
This patch adds full RCU protection to np->opt
Reported-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]> | High | 167,335 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: image_transform_default_ini(PNG_CONST image_transform *this,
transform_display *that)
{
this->next->ini(this->next, that);
}
Vulnerability Type: +Priv
CWE ID:
Summary: Unspecified vulnerability in libpng before 1.6.20, as used in Android 4.x before 4.4.4, 5.0.x before 5.0.2, 5.1.x before 5.1.1, and 6.x before 2016-07-01, allows attackers to gain privileges via a crafted application, as demonstrated by obtaining Signature or SignatureOrSystem access, aka internal bug 23265085.
Commit Message: DO NOT MERGE Update libpng to 1.6.20
BUG:23265085
Change-Id: I85199805636d771f3597b691b63bc0bf46084833
(cherry picked from commit bbe98b40cda082024b669fa508931042eed18f82)
| High | 173,621 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void JBIG2Stream::readSegments() {
Guint segNum, segFlags, segType, page, segLength;
Guint refFlags, nRefSegs;
Guint *refSegs;
Goffset segDataPos;
int c1, c2, c3;
Guint i;
while (readULong(&segNum)) {
if (!readUByte(&segFlags)) {
goto eofError1;
}
segType = segFlags & 0x3f;
if (!readUByte(&refFlags)) {
goto eofError1;
}
nRefSegs = refFlags >> 5;
if (nRefSegs == 7) {
if ((c1 = curStr->getChar()) == EOF ||
(c2 = curStr->getChar()) == EOF ||
(c3 = curStr->getChar()) == EOF) {
goto eofError1;
}
refFlags = (refFlags << 24) | (c1 << 16) | (c2 << 8) | c3;
nRefSegs = refFlags & 0x1fffffff;
for (i = 0; i < (nRefSegs + 9) >> 3; ++i) {
if ((c1 = curStr->getChar()) == EOF) {
goto eofError1;
}
}
}
refSegs = (Guint *)gmallocn(nRefSegs, sizeof(Guint));
if (segNum <= 256) {
for (i = 0; i < nRefSegs; ++i) {
if (!readUByte(&refSegs[i])) {
goto eofError2;
}
}
} else if (segNum <= 65536) {
for (i = 0; i < nRefSegs; ++i) {
if (!readUWord(&refSegs[i])) {
goto eofError2;
}
}
} else {
for (i = 0; i < nRefSegs; ++i) {
if (!readULong(&refSegs[i])) {
goto eofError2;
}
}
}
if (segFlags & 0x40) {
if (!readULong(&page)) {
goto eofError2;
}
} else {
if (!readUByte(&page)) {
goto eofError2;
}
}
if (!readULong(&segLength)) {
goto eofError2;
}
segDataPos = curStr->getPos();
if (!pageBitmap && ((segType >= 4 && segType <= 7) ||
(segType >= 20 && segType <= 43))) {
error(errSyntaxError, curStr->getPos(), "First JBIG2 segment associated with a page must be a page information segment");
goto syntaxError;
}
switch (segType) {
case 0:
if (!readSymbolDictSeg(segNum, segLength, refSegs, nRefSegs)) {
goto syntaxError;
}
break;
case 4:
readTextRegionSeg(segNum, gFalse, gFalse, segLength, refSegs, nRefSegs);
break;
case 6:
readTextRegionSeg(segNum, gTrue, gFalse, segLength, refSegs, nRefSegs);
break;
case 7:
readTextRegionSeg(segNum, gTrue, gTrue, segLength, refSegs, nRefSegs);
break;
case 16:
readPatternDictSeg(segNum, segLength);
break;
case 20:
readHalftoneRegionSeg(segNum, gFalse, gFalse, segLength,
refSegs, nRefSegs);
break;
case 22:
readHalftoneRegionSeg(segNum, gTrue, gFalse, segLength,
refSegs, nRefSegs);
break;
case 23:
readHalftoneRegionSeg(segNum, gTrue, gTrue, segLength,
refSegs, nRefSegs);
break;
case 36:
readGenericRegionSeg(segNum, gFalse, gFalse, segLength);
break;
case 38:
readGenericRegionSeg(segNum, gTrue, gFalse, segLength);
break;
case 39:
readGenericRegionSeg(segNum, gTrue, gTrue, segLength);
break;
case 40:
readGenericRefinementRegionSeg(segNum, gFalse, gFalse, segLength,
refSegs, nRefSegs);
break;
case 42:
readGenericRefinementRegionSeg(segNum, gTrue, gFalse, segLength,
refSegs, nRefSegs);
break;
case 43:
readGenericRefinementRegionSeg(segNum, gTrue, gTrue, segLength,
refSegs, nRefSegs);
break;
case 48:
readPageInfoSeg(segLength);
break;
case 50:
readEndOfStripeSeg(segLength);
break;
case 52:
readProfilesSeg(segLength);
break;
case 53:
readCodeTableSeg(segNum, segLength);
break;
case 62:
readExtensionSeg(segLength);
break;
default:
error(errSyntaxError, curStr->getPos(), "Unknown segment type in JBIG2 stream");
for (i = 0; i < segLength; ++i) {
if ((c1 = curStr->getChar()) == EOF) {
goto eofError2;
}
}
break;
}
if (segLength != 0xffffffff) {
Goffset segExtraBytes = segDataPos + segLength - curStr->getPos();
if (segExtraBytes > 0) {
error(errSyntaxError, curStr->getPos(), "{0:d} extraneous byte{1:s} after segment",
segExtraBytes, (segExtraBytes > 1) ? "s" : "");
int trash;
for (Goffset i = segExtraBytes; i > 0; i--) {
readByte(&trash);
}
} else if (segExtraBytes < 0) {
error(errSyntaxError, curStr->getPos(), "Previous segment handler read too many bytes");
}
}
gfree(refSegs);
}
return;
syntaxError:
gfree(refSegs);
return;
eofError2:
gfree(refSegs);
eofError1:
error(errSyntaxError, curStr->getPos(), "Unexpected EOF in JBIG2 stream");
}
Vulnerability Type: DoS Overflow
CWE ID: CWE-119
Summary: The JBIG2Stream::readSegments method in JBIG2Stream.cc in Poppler before 0.24.5 does not use the correct specifier within a format string, which allows context-dependent attackers to cause a denial of service (segmentation fault and application crash) via a crafted PDF file.
Commit Message: | Medium | 165,299 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static void get_frame_stats(vpx_codec_ctx_t *ctx,
const vpx_image_t *img,
vpx_codec_pts_t pts,
unsigned int duration,
vpx_enc_frame_flags_t flags,
unsigned int deadline,
vpx_fixed_buf_t *stats) {
vpx_codec_iter_t iter = NULL;
const vpx_codec_cx_pkt_t *pkt = NULL;
const vpx_codec_err_t res = vpx_codec_encode(ctx, img, pts, duration, flags,
deadline);
if (res != VPX_CODEC_OK)
die_codec(ctx, "Failed to get frame stats.");
while ((pkt = vpx_codec_get_cx_data(ctx, &iter)) != NULL) {
if (pkt->kind == VPX_CODEC_STATS_PKT) {
const uint8_t *const pkt_buf = pkt->data.twopass_stats.buf;
const size_t pkt_size = pkt->data.twopass_stats.sz;
stats->buf = realloc(stats->buf, stats->sz + pkt_size);
memcpy((uint8_t *)stats->buf + stats->sz, pkt_buf, pkt_size);
stats->sz += pkt_size;
}
}
}
Vulnerability Type: DoS Exec Code Overflow Mem. Corr.
CWE ID: CWE-119
Summary: libvpx in mediaserver in Android 4.x before 4.4.4, 5.x before 5.1.1 LMY49H, and 6.0 before 2016-03-01 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted media file, related to libwebm/mkvparser.cpp and other files, aka internal bug 23452792.
Commit Message: Merge Conflict Fix CL to lmp-mr1-release for ag/849478
DO NOT MERGE - libvpx: Pull from upstream
Current HEAD: 7105df53d7dc13d5e575bc8df714ec8d1da36b06
BUG=23452792
Change-Id: Ic78176fc369e0bacc71d423e0e2e6075d004aaec
| High | 174,492 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void ExtensionWebContentsObserver::RenderViewCreated(
content::RenderViewHost* render_view_host) {
const Extension* extension = GetExtension(render_view_host);
if (!extension)
return;
content::RenderProcessHost* process = render_view_host->GetProcess();
if (type == Manifest::TYPE_EXTENSION ||
type == Manifest::TYPE_LEGACY_PACKAGED_APP ||
(type == Manifest::TYPE_PLATFORM_APP &&
extension->location() == Manifest::COMPONENT)) {
content::ChildProcessSecurityPolicy::GetInstance()->GrantScheme(
process->GetID(), content::kChromeUIScheme);
}
if (type == Manifest::TYPE_EXTENSION ||
type == Manifest::TYPE_LEGACY_PACKAGED_APP) {
ExtensionPrefs* prefs = ExtensionPrefs::Get(browser_context_);
if (prefs->AllowFileAccess(extension->id())) {
content::ChildProcessSecurityPolicy::GetInstance()->GrantScheme(
process->GetID(), url::kFileScheme);
}
}
render_view_host->Send(new ExtensionMsg_ActivateExtension(extension->id()));
}
Vulnerability Type: Bypass
CWE ID: CWE-264
Summary: PDFium, as used in Google Chrome before 47.0.2526.73, does not properly restrict use of chrome: URLs, which allows remote attackers to bypass intended scheme restrictions via a crafted PDF document, as demonstrated by a document with a link to a chrome://settings URL.
Commit Message: This patch implements a mechanism for more granular link URL permissions (filtering on scheme/host). This fixes the bug that allowed PDFs to have working links to any "chrome://" URLs.
BUG=528505,226927
Review URL: https://codereview.chromium.org/1362433002
Cr-Commit-Position: refs/heads/master@{#351705} | Medium | 171,776 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: my_object_recursive1 (MyObject *obj, GArray *array, guint32 *len_ret, GError **error)
{
*len_ret = array->len;
return TRUE;
}
Vulnerability Type: DoS Bypass
CWE ID: CWE-264
Summary: DBus-GLib 0.73 disregards the access flag of exported GObject properties, which allows local users to bypass intended access restrictions and possibly cause a denial of service by modifying properties, as demonstrated by properties of the (1) DeviceKit-Power, (2) NetworkManager, and (3) ModemManager services.
Commit Message: | Low | 165,117 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: WORD32 ih264d_video_decode(iv_obj_t *dec_hdl, void *pv_api_ip, void *pv_api_op)
{
/* ! */
dec_struct_t * ps_dec = (dec_struct_t *)(dec_hdl->pv_codec_handle);
WORD32 i4_err_status = 0;
UWORD8 *pu1_buf = NULL;
WORD32 buflen;
UWORD32 u4_max_ofst, u4_length_of_start_code = 0;
UWORD32 bytes_consumed = 0;
UWORD32 cur_slice_is_nonref = 0;
UWORD32 u4_next_is_aud;
UWORD32 u4_first_start_code_found = 0;
WORD32 ret = 0,api_ret_value = IV_SUCCESS;
WORD32 header_data_left = 0,frame_data_left = 0;
UWORD8 *pu1_bitstrm_buf;
ivd_video_decode_ip_t *ps_dec_ip;
ivd_video_decode_op_t *ps_dec_op;
ithread_set_name((void*)"Parse_thread");
ps_dec_ip = (ivd_video_decode_ip_t *)pv_api_ip;
ps_dec_op = (ivd_video_decode_op_t *)pv_api_op;
{
UWORD32 u4_size;
u4_size = ps_dec_op->u4_size;
memset(ps_dec_op, 0, sizeof(ivd_video_decode_op_t));
ps_dec_op->u4_size = u4_size;
}
ps_dec->pv_dec_out = ps_dec_op;
if(ps_dec->init_done != 1)
{
return IV_FAIL;
}
/*Data memory barries instruction,so that bitstream write by the application is complete*/
DATA_SYNC();
if(0 == ps_dec->u1_flushfrm)
{
if(ps_dec_ip->pv_stream_buffer == NULL)
{
ps_dec_op->u4_error_code |= 1 << IVD_UNSUPPORTEDPARAM;
ps_dec_op->u4_error_code |= IVD_DEC_FRM_BS_BUF_NULL;
return IV_FAIL;
}
if(ps_dec_ip->u4_num_Bytes <= 0)
{
ps_dec_op->u4_error_code |= 1 << IVD_UNSUPPORTEDPARAM;
ps_dec_op->u4_error_code |= IVD_DEC_NUMBYTES_INV;
return IV_FAIL;
}
}
ps_dec->u1_pic_decode_done = 0;
ps_dec_op->u4_num_bytes_consumed = 0;
ps_dec->ps_out_buffer = NULL;
if(ps_dec_ip->u4_size
>= offsetof(ivd_video_decode_ip_t, s_out_buffer))
ps_dec->ps_out_buffer = &ps_dec_ip->s_out_buffer;
ps_dec->u4_fmt_conv_cur_row = 0;
ps_dec->u4_output_present = 0;
ps_dec->s_disp_op.u4_error_code = 1;
ps_dec->u4_fmt_conv_num_rows = FMT_CONV_NUM_ROWS;
if(0 == ps_dec->u4_share_disp_buf
&& ps_dec->i4_decode_header == 0)
{
UWORD32 i;
if((ps_dec->ps_out_buffer->u4_num_bufs == 0) ||
(ps_dec->ps_out_buffer->u4_num_bufs > IVD_VIDDEC_MAX_IO_BUFFERS))
{
ps_dec_op->u4_error_code |= 1 << IVD_UNSUPPORTEDPARAM;
ps_dec_op->u4_error_code |= IVD_DISP_FRM_ZERO_OP_BUFS;
return IV_FAIL;
}
for(i = 0; i < ps_dec->ps_out_buffer->u4_num_bufs; i++)
{
if(ps_dec->ps_out_buffer->pu1_bufs[i] == NULL)
{
ps_dec_op->u4_error_code |= 1 << IVD_UNSUPPORTEDPARAM;
ps_dec_op->u4_error_code |= IVD_DISP_FRM_OP_BUF_NULL;
return IV_FAIL;
}
if(ps_dec->ps_out_buffer->u4_min_out_buf_size[i] == 0)
{
ps_dec_op->u4_error_code |= 1 << IVD_UNSUPPORTEDPARAM;
ps_dec_op->u4_error_code |=
IVD_DISP_FRM_ZERO_OP_BUF_SIZE;
return IV_FAIL;
}
}
}
if(ps_dec->u4_total_frames_decoded >= NUM_FRAMES_LIMIT)
{
ps_dec_op->u4_error_code = ERROR_FRAME_LIMIT_OVER;
return IV_FAIL;
}
/* ! */
ps_dec->u4_ts = ps_dec_ip->u4_ts;
ps_dec_op->u4_error_code = 0;
ps_dec_op->e_pic_type = -1;
ps_dec_op->u4_output_present = 0;
ps_dec_op->u4_frame_decoded_flag = 0;
ps_dec->i4_frametype = -1;
ps_dec->i4_content_type = -1;
ps_dec->u4_slice_start_code_found = 0;
/* In case the deocder is not in flush mode(in shared mode),
then decoder has to pick up a buffer to write current frame.
Check if a frame is available in such cases */
if(ps_dec->u1_init_dec_flag == 1 && ps_dec->u4_share_disp_buf == 1
&& ps_dec->u1_flushfrm == 0)
{
UWORD32 i;
WORD32 disp_avail = 0, free_id;
/* Check if at least one buffer is available with the codec */
/* If not then return to application with error */
for(i = 0; i < ps_dec->u1_pic_bufs; i++)
{
if(0 == ps_dec->u4_disp_buf_mapping[i]
|| 1 == ps_dec->u4_disp_buf_to_be_freed[i])
{
disp_avail = 1;
break;
}
}
if(0 == disp_avail)
{
/* If something is queued for display wait for that buffer to be returned */
ps_dec_op->u4_error_code = IVD_DEC_REF_BUF_NULL;
ps_dec_op->u4_error_code |= (1 << IVD_UNSUPPORTEDPARAM);
return (IV_FAIL);
}
while(1)
{
pic_buffer_t *ps_pic_buf;
ps_pic_buf = (pic_buffer_t *)ih264_buf_mgr_get_next_free(
(buf_mgr_t *)ps_dec->pv_pic_buf_mgr, &free_id);
if(ps_pic_buf == NULL)
{
UWORD32 i, display_queued = 0;
/* check if any buffer was given for display which is not returned yet */
for(i = 0; i < (MAX_DISP_BUFS_NEW); i++)
{
if(0 != ps_dec->u4_disp_buf_mapping[i])
{
display_queued = 1;
break;
}
}
/* If some buffer is queued for display, then codec has to singal an error and wait
for that buffer to be returned.
If nothing is queued for display then codec has ownership of all display buffers
and it can reuse any of the existing buffers and continue decoding */
if(1 == display_queued)
{
/* If something is queued for display wait for that buffer to be returned */
ps_dec_op->u4_error_code = IVD_DEC_REF_BUF_NULL;
ps_dec_op->u4_error_code |= (1
<< IVD_UNSUPPORTEDPARAM);
return (IV_FAIL);
}
}
else
{
/* If the buffer is with display, then mark it as in use and then look for a buffer again */
if(1 == ps_dec->u4_disp_buf_mapping[free_id])
{
ih264_buf_mgr_set_status(
(buf_mgr_t *)ps_dec->pv_pic_buf_mgr,
free_id,
BUF_MGR_IO);
}
else
{
/**
* Found a free buffer for present call. Release it now.
* Will be again obtained later.
*/
ih264_buf_mgr_release((buf_mgr_t *)ps_dec->pv_pic_buf_mgr,
free_id,
BUF_MGR_IO);
break;
}
}
}
}
if(ps_dec->u1_flushfrm)
{
if(ps_dec->u1_init_dec_flag == 0)
{
/*Come out of flush mode and return*/
ps_dec->u1_flushfrm = 0;
return (IV_FAIL);
}
ih264d_get_next_display_field(ps_dec, ps_dec->ps_out_buffer,
&(ps_dec->s_disp_op));
if(0 == ps_dec->s_disp_op.u4_error_code)
{
/* check output buffer size given by the application */
if(check_app_out_buf_size(ps_dec) != IV_SUCCESS)
{
ps_dec_op->u4_error_code= IVD_DISP_FRM_ZERO_OP_BUF_SIZE;
return (IV_FAIL);
}
ps_dec->u4_fmt_conv_cur_row = 0;
ps_dec->u4_fmt_conv_num_rows = ps_dec->s_disp_frame_info.u4_y_ht;
ih264d_format_convert(ps_dec, &(ps_dec->s_disp_op),
ps_dec->u4_fmt_conv_cur_row,
ps_dec->u4_fmt_conv_num_rows);
ps_dec->u4_fmt_conv_cur_row += ps_dec->u4_fmt_conv_num_rows;
ps_dec->u4_output_present = 1;
}
ih264d_release_display_field(ps_dec, &(ps_dec->s_disp_op));
ps_dec_op->u4_pic_wd = (UWORD32)ps_dec->u2_disp_width;
ps_dec_op->u4_pic_ht = (UWORD32)ps_dec->u2_disp_height;
ps_dec_op->u4_new_seq = 0;
ps_dec_op->u4_output_present = ps_dec->u4_output_present;
ps_dec_op->u4_progressive_frame_flag =
ps_dec->s_disp_op.u4_progressive_frame_flag;
ps_dec_op->e_output_format =
ps_dec->s_disp_op.e_output_format;
ps_dec_op->s_disp_frm_buf = ps_dec->s_disp_op.s_disp_frm_buf;
ps_dec_op->e4_fld_type = ps_dec->s_disp_op.e4_fld_type;
ps_dec_op->u4_ts = ps_dec->s_disp_op.u4_ts;
ps_dec_op->u4_disp_buf_id = ps_dec->s_disp_op.u4_disp_buf_id;
/*In the case of flush ,since no frame is decoded set pic type as invalid*/
ps_dec_op->u4_is_ref_flag = -1;
ps_dec_op->e_pic_type = IV_NA_FRAME;
ps_dec_op->u4_frame_decoded_flag = 0;
if(0 == ps_dec->s_disp_op.u4_error_code)
{
return (IV_SUCCESS);
}
else
return (IV_FAIL);
}
if(ps_dec->u1_res_changed == 1)
{
/*if resolution has changed and all buffers have been flushed, reset decoder*/
ih264d_init_decoder(ps_dec);
}
ps_dec->u4_prev_nal_skipped = 0;
ps_dec->u2_cur_mb_addr = 0;
ps_dec->u2_total_mbs_coded = 0;
ps_dec->u2_cur_slice_num = 0;
ps_dec->cur_dec_mb_num = 0;
ps_dec->cur_recon_mb_num = 0;
ps_dec->u4_first_slice_in_pic = 1;
ps_dec->u1_slice_header_done = 0;
ps_dec->u1_dangling_field = 0;
ps_dec->u4_dec_thread_created = 0;
ps_dec->u4_bs_deblk_thread_created = 0;
ps_dec->u4_cur_bs_mb_num = 0;
ps_dec->u4_start_recon_deblk = 0;
ps_dec->u4_sps_cnt_in_process = 0;
DEBUG_THREADS_PRINTF(" Starting process call\n");
ps_dec->u4_pic_buf_got = 0;
do
{
WORD32 buf_size;
pu1_buf = (UWORD8*)ps_dec_ip->pv_stream_buffer
+ ps_dec_op->u4_num_bytes_consumed;
u4_max_ofst = ps_dec_ip->u4_num_Bytes
- ps_dec_op->u4_num_bytes_consumed;
/* If dynamic bitstream buffer is not allocated and
* header decode is done, then allocate dynamic bitstream buffer
*/
if((NULL == ps_dec->pu1_bits_buf_dynamic) &&
(ps_dec->i4_header_decoded & 1))
{
WORD32 size;
void *pv_buf;
void *pv_mem_ctxt = ps_dec->pv_mem_ctxt;
size = MAX(256000, ps_dec->u2_pic_wd * ps_dec->u2_pic_ht * 3 / 2);
pv_buf = ps_dec->pf_aligned_alloc(pv_mem_ctxt, 128, size);
RETURN_IF((NULL == pv_buf), IV_FAIL);
ps_dec->pu1_bits_buf_dynamic = pv_buf;
ps_dec->u4_dynamic_bits_buf_size = size;
}
if(ps_dec->pu1_bits_buf_dynamic)
{
pu1_bitstrm_buf = ps_dec->pu1_bits_buf_dynamic;
buf_size = ps_dec->u4_dynamic_bits_buf_size;
}
else
{
pu1_bitstrm_buf = ps_dec->pu1_bits_buf_static;
buf_size = ps_dec->u4_static_bits_buf_size;
}
u4_next_is_aud = 0;
buflen = ih264d_find_start_code(pu1_buf, 0, u4_max_ofst,
&u4_length_of_start_code,
&u4_next_is_aud);
if(buflen == -1)
buflen = 0;
/* Ignore bytes beyond the allocated size of intermediate buffer */
/* Since 8 bytes are read ahead, ensure 8 bytes are free at the
end of the buffer, which will be memset to 0 after emulation prevention */
buflen = MIN(buflen, buf_size - 8);
bytes_consumed = buflen + u4_length_of_start_code;
ps_dec_op->u4_num_bytes_consumed += bytes_consumed;
{
UWORD8 u1_firstbyte, u1_nal_ref_idc;
if(ps_dec->i4_app_skip_mode == IVD_SKIP_B)
{
u1_firstbyte = *(pu1_buf + u4_length_of_start_code);
u1_nal_ref_idc = (UWORD8)(NAL_REF_IDC(u1_firstbyte));
if(u1_nal_ref_idc == 0)
{
/*skip non reference frames*/
cur_slice_is_nonref = 1;
continue;
}
else
{
if(1 == cur_slice_is_nonref)
{
/*We have encountered a referenced frame,return to app*/
ps_dec_op->u4_num_bytes_consumed -=
bytes_consumed;
ps_dec_op->e_pic_type = IV_B_FRAME;
ps_dec_op->u4_error_code =
IVD_DEC_FRM_SKIPPED;
ps_dec_op->u4_error_code |= (1
<< IVD_UNSUPPORTEDPARAM);
ps_dec_op->u4_frame_decoded_flag = 0;
ps_dec_op->u4_size =
sizeof(ivd_video_decode_op_t);
/*signal the decode thread*/
ih264d_signal_decode_thread(ps_dec);
/* close deblock thread if it is not closed yet*/
if(ps_dec->u4_num_cores == 3)
{
ih264d_signal_bs_deblk_thread(ps_dec);
}
return (IV_FAIL);
}
}
}
}
if(buflen)
{
memcpy(pu1_bitstrm_buf, pu1_buf + u4_length_of_start_code,
buflen);
/* Decoder may read extra 8 bytes near end of the frame */
if((buflen + 8) < buf_size)
{
memset(pu1_bitstrm_buf + buflen, 0, 8);
}
u4_first_start_code_found = 1;
}
else
{
/*start code not found*/
if(u4_first_start_code_found == 0)
{
/*no start codes found in current process call*/
ps_dec->i4_error_code = ERROR_START_CODE_NOT_FOUND;
ps_dec_op->u4_error_code |= 1 << IVD_INSUFFICIENTDATA;
if(ps_dec->u4_pic_buf_got == 0)
{
ih264d_fill_output_struct_from_context(ps_dec,
ps_dec_op);
ps_dec_op->u4_error_code = ps_dec->i4_error_code;
ps_dec_op->u4_frame_decoded_flag = 0;
return (IV_FAIL);
}
else
{
ps_dec->u1_pic_decode_done = 1;
continue;
}
}
else
{
/* a start code has already been found earlier in the same process call*/
frame_data_left = 0;
header_data_left = 0;
continue;
}
}
ps_dec->u4_return_to_app = 0;
ret = ih264d_parse_nal_unit(dec_hdl, ps_dec_op,
pu1_bitstrm_buf, buflen);
if(ret != OK)
{
UWORD32 error = ih264d_map_error(ret);
ps_dec_op->u4_error_code = error | ret;
api_ret_value = IV_FAIL;
if((ret == IVD_RES_CHANGED)
|| (ret == IVD_MEM_ALLOC_FAILED)
|| (ret == ERROR_UNAVAIL_PICBUF_T)
|| (ret == ERROR_UNAVAIL_MVBUF_T)
|| (ret == ERROR_INV_SPS_PPS_T)
|| (ret == IVD_DISP_FRM_ZERO_OP_BUF_SIZE))
{
ps_dec->u4_slice_start_code_found = 0;
break;
}
if((ret == ERROR_INCOMPLETE_FRAME) || (ret == ERROR_DANGLING_FIELD_IN_PIC))
{
ps_dec_op->u4_num_bytes_consumed -= bytes_consumed;
api_ret_value = IV_FAIL;
break;
}
if(ret == ERROR_IN_LAST_SLICE_OF_PIC)
{
api_ret_value = IV_FAIL;
break;
}
}
if(ps_dec->u4_return_to_app)
{
/*We have encountered a referenced frame,return to app*/
ps_dec_op->u4_num_bytes_consumed -= bytes_consumed;
ps_dec_op->u4_error_code = IVD_DEC_FRM_SKIPPED;
ps_dec_op->u4_error_code |= (1 << IVD_UNSUPPORTEDPARAM);
ps_dec_op->u4_frame_decoded_flag = 0;
ps_dec_op->u4_size = sizeof(ivd_video_decode_op_t);
/*signal the decode thread*/
ih264d_signal_decode_thread(ps_dec);
/* close deblock thread if it is not closed yet*/
if(ps_dec->u4_num_cores == 3)
{
ih264d_signal_bs_deblk_thread(ps_dec);
}
return (IV_FAIL);
}
header_data_left = ((ps_dec->i4_decode_header == 1)
&& (ps_dec->i4_header_decoded != 3)
&& (ps_dec_op->u4_num_bytes_consumed
< ps_dec_ip->u4_num_Bytes));
frame_data_left = (((ps_dec->i4_decode_header == 0)
&& ((ps_dec->u1_pic_decode_done == 0)
|| (u4_next_is_aud == 1)))
&& (ps_dec_op->u4_num_bytes_consumed
< ps_dec_ip->u4_num_Bytes));
}
while(( header_data_left == 1)||(frame_data_left == 1));
if((ps_dec->u4_pic_buf_got == 1)
&& (ret != IVD_MEM_ALLOC_FAILED)
&& ps_dec->u2_total_mbs_coded < ps_dec->u2_frm_ht_in_mbs * ps_dec->u2_frm_wd_in_mbs)
{
WORD32 num_mb_skipped;
WORD32 prev_slice_err;
pocstruct_t temp_poc;
WORD32 ret1;
WORD32 ht_in_mbs;
ht_in_mbs = ps_dec->u2_pic_ht >> (4 + ps_dec->ps_cur_slice->u1_field_pic_flag);
num_mb_skipped = (ht_in_mbs * ps_dec->u2_frm_wd_in_mbs)
- ps_dec->u2_total_mbs_coded;
if(ps_dec->u4_first_slice_in_pic && (ps_dec->u4_pic_buf_got == 0))
prev_slice_err = 1;
else
prev_slice_err = 2;
if(ps_dec->u4_first_slice_in_pic && (ps_dec->u2_total_mbs_coded == 0))
prev_slice_err = 1;
ret1 = ih264d_mark_err_slice_skip(ps_dec, num_mb_skipped, ps_dec->u1_nal_unit_type == IDR_SLICE_NAL, ps_dec->ps_cur_slice->u2_frame_num,
&temp_poc, prev_slice_err);
if((ret1 == ERROR_UNAVAIL_PICBUF_T) || (ret1 == ERROR_UNAVAIL_MVBUF_T) ||
(ret1 == ERROR_INV_SPS_PPS_T))
{
ret = ret1;
}
}
if((ret == IVD_RES_CHANGED)
|| (ret == IVD_MEM_ALLOC_FAILED)
|| (ret == ERROR_UNAVAIL_PICBUF_T)
|| (ret == ERROR_UNAVAIL_MVBUF_T)
|| (ret == ERROR_INV_SPS_PPS_T))
{
/* signal the decode thread */
ih264d_signal_decode_thread(ps_dec);
/* close deblock thread if it is not closed yet */
if(ps_dec->u4_num_cores == 3)
{
ih264d_signal_bs_deblk_thread(ps_dec);
}
/* dont consume bitstream for change in resolution case */
if(ret == IVD_RES_CHANGED)
{
ps_dec_op->u4_num_bytes_consumed -= bytes_consumed;
}
return IV_FAIL;
}
if(ps_dec->u1_separate_parse)
{
/* If Format conversion is not complete,
complete it here */
if(ps_dec->u4_num_cores == 2)
{
/*do deblocking of all mbs*/
if((ps_dec->u4_nmb_deblk == 0) &&(ps_dec->u4_start_recon_deblk == 1) && (ps_dec->ps_cur_sps->u1_mb_aff_flag == 0))
{
UWORD32 u4_num_mbs,u4_max_addr;
tfr_ctxt_t s_tfr_ctxt;
tfr_ctxt_t *ps_tfr_cxt = &s_tfr_ctxt;
pad_mgr_t *ps_pad_mgr = &ps_dec->s_pad_mgr;
/*BS is done for all mbs while parsing*/
u4_max_addr = (ps_dec->u2_frm_wd_in_mbs * ps_dec->u2_frm_ht_in_mbs) - 1;
ps_dec->u4_cur_bs_mb_num = u4_max_addr + 1;
ih264d_init_deblk_tfr_ctxt(ps_dec, ps_pad_mgr, ps_tfr_cxt,
ps_dec->u2_frm_wd_in_mbs, 0);
u4_num_mbs = u4_max_addr
- ps_dec->u4_cur_deblk_mb_num + 1;
DEBUG_PERF_PRINTF("mbs left for deblocking= %d \n",u4_num_mbs);
if(u4_num_mbs != 0)
ih264d_check_mb_map_deblk(ps_dec, u4_num_mbs,
ps_tfr_cxt,1);
ps_dec->u4_start_recon_deblk = 0;
}
}
/*signal the decode thread*/
ih264d_signal_decode_thread(ps_dec);
/* close deblock thread if it is not closed yet*/
if(ps_dec->u4_num_cores == 3)
{
ih264d_signal_bs_deblk_thread(ps_dec);
}
}
DATA_SYNC();
if((ps_dec_op->u4_error_code & 0xff)
!= ERROR_DYNAMIC_RESOLUTION_NOT_SUPPORTED)
{
ps_dec_op->u4_pic_wd = (UWORD32)ps_dec->u2_disp_width;
ps_dec_op->u4_pic_ht = (UWORD32)ps_dec->u2_disp_height;
}
if(ps_dec->i4_header_decoded != 3)
{
ps_dec_op->u4_error_code |= (1 << IVD_INSUFFICIENTDATA);
}
if(ps_dec->i4_decode_header == 1 && ps_dec->i4_header_decoded != 3)
{
ps_dec_op->u4_error_code |= (1 << IVD_INSUFFICIENTDATA);
}
if(ps_dec->u4_prev_nal_skipped)
{
/*We have encountered a referenced frame,return to app*/
ps_dec_op->u4_error_code = IVD_DEC_FRM_SKIPPED;
ps_dec_op->u4_error_code |= (1 << IVD_UNSUPPORTEDPARAM);
ps_dec_op->u4_frame_decoded_flag = 0;
ps_dec_op->u4_size = sizeof(ivd_video_decode_op_t);
/* close deblock thread if it is not closed yet*/
if(ps_dec->u4_num_cores == 3)
{
ih264d_signal_bs_deblk_thread(ps_dec);
}
return (IV_FAIL);
}
if((ps_dec->u4_pic_buf_got == 1)
&& (ERROR_DANGLING_FIELD_IN_PIC != i4_err_status))
{
/*
* For field pictures, set the bottom and top picture decoded u4_flag correctly.
*/
if(ps_dec->ps_cur_slice->u1_field_pic_flag)
{
if(1 == ps_dec->ps_cur_slice->u1_bottom_field_flag)
{
ps_dec->u1_top_bottom_decoded |= BOT_FIELD_ONLY;
}
else
{
ps_dec->u1_top_bottom_decoded |= TOP_FIELD_ONLY;
}
}
else
{
ps_dec->u1_top_bottom_decoded = TOP_FIELD_ONLY | BOT_FIELD_ONLY;
}
/* if new frame in not found (if we are still getting slices from previous frame)
* ih264d_deblock_display is not called. Such frames will not be added to reference /display
*/
if ((ps_dec->ps_dec_err_status->u1_err_flag & REJECT_CUR_PIC) == 0)
{
/* Calling Function to deblock Picture and Display */
ret = ih264d_deblock_display(ps_dec);
}
/*set to complete ,as we dont support partial frame decode*/
if(ps_dec->i4_header_decoded == 3)
{
ps_dec->u2_total_mbs_coded = ps_dec->ps_cur_sps->u2_max_mb_addr + 1;
}
/*Update the i4_frametype at the end of picture*/
if(ps_dec->ps_cur_slice->u1_nal_unit_type == IDR_SLICE_NAL)
{
ps_dec->i4_frametype = IV_IDR_FRAME;
}
else if(ps_dec->i4_pic_type == B_SLICE)
{
ps_dec->i4_frametype = IV_B_FRAME;
}
else if(ps_dec->i4_pic_type == P_SLICE)
{
ps_dec->i4_frametype = IV_P_FRAME;
}
else if(ps_dec->i4_pic_type == I_SLICE)
{
ps_dec->i4_frametype = IV_I_FRAME;
}
else
{
H264_DEC_DEBUG_PRINT("Shouldn't come here\n");
}
ps_dec->i4_content_type = ps_dec->ps_cur_slice->u1_field_pic_flag;
ps_dec->u4_total_frames_decoded = ps_dec->u4_total_frames_decoded + 2;
ps_dec->u4_total_frames_decoded = ps_dec->u4_total_frames_decoded
- ps_dec->ps_cur_slice->u1_field_pic_flag;
}
/* close deblock thread if it is not closed yet*/
if(ps_dec->u4_num_cores == 3)
{
ih264d_signal_bs_deblk_thread(ps_dec);
}
{
/* In case the decoder is configured to run in low delay mode,
* then get display buffer and then format convert.
* Note in this mode, format conversion does not run paralelly in a thread and adds to the codec cycles
*/
if((IVD_DECODE_FRAME_OUT == ps_dec->e_frm_out_mode)
&& ps_dec->u1_init_dec_flag)
{
ih264d_get_next_display_field(ps_dec, ps_dec->ps_out_buffer,
&(ps_dec->s_disp_op));
if(0 == ps_dec->s_disp_op.u4_error_code)
{
ps_dec->u4_fmt_conv_cur_row = 0;
ps_dec->u4_output_present = 1;
}
}
ih264d_fill_output_struct_from_context(ps_dec, ps_dec_op);
/* If Format conversion is not complete,
complete it here */
if(ps_dec->u4_output_present &&
(ps_dec->u4_fmt_conv_cur_row < ps_dec->s_disp_frame_info.u4_y_ht))
{
ps_dec->u4_fmt_conv_num_rows = ps_dec->s_disp_frame_info.u4_y_ht
- ps_dec->u4_fmt_conv_cur_row;
ih264d_format_convert(ps_dec, &(ps_dec->s_disp_op),
ps_dec->u4_fmt_conv_cur_row,
ps_dec->u4_fmt_conv_num_rows);
ps_dec->u4_fmt_conv_cur_row += ps_dec->u4_fmt_conv_num_rows;
}
ih264d_release_display_field(ps_dec, &(ps_dec->s_disp_op));
}
if(ps_dec->i4_decode_header == 1 && (ps_dec->i4_header_decoded & 1) == 1)
{
ps_dec_op->u4_progressive_frame_flag = 1;
if((NULL != ps_dec->ps_cur_sps) && (1 == (ps_dec->ps_cur_sps->u1_is_valid)))
{
if((0 == ps_dec->ps_sps->u1_frame_mbs_only_flag)
&& (0 == ps_dec->ps_sps->u1_mb_aff_flag))
ps_dec_op->u4_progressive_frame_flag = 0;
}
}
if((TOP_FIELD_ONLY | BOT_FIELD_ONLY) == ps_dec->u1_top_bottom_decoded)
{
ps_dec->u1_top_bottom_decoded = 0;
}
/*--------------------------------------------------------------------*/
/* Do End of Pic processing. */
/* Should be called only if frame was decoded in previous process call*/
/*--------------------------------------------------------------------*/
if(ps_dec->u4_pic_buf_got == 1)
{
if(1 == ps_dec->u1_last_pic_not_decoded)
{
ret = ih264d_end_of_pic_dispbuf_mgr(ps_dec);
if(ret != OK)
return ret;
ret = ih264d_end_of_pic(ps_dec);
if(ret != OK)
return ret;
}
else
{
ret = ih264d_end_of_pic(ps_dec);
if(ret != OK)
return ret;
}
}
/*Data memory barrier instruction,so that yuv write by the library is complete*/
DATA_SYNC();
H264_DEC_DEBUG_PRINT("The num bytes consumed: %d\n",
ps_dec_op->u4_num_bytes_consumed);
return api_ret_value;
}
Vulnerability Type: +Info
CWE ID: CWE-200
Summary: An information disclosure vulnerability in the Android media framework (libavc). Product: Android. Versions: 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-63122634.
Commit Message: Decoder: Increased allocation and added checks in sei parsing.
This prevents heap overflow while parsing sei_message.
Bug: 63122634
Test: ran PoC on unpatched/patched
Change-Id: I61c1ff4ac053a060be8c24da4671db985cac628c
(cherry picked from commit f2b70d353768af8d4ead7f32497be05f197925ef)
| High | 174,106 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void server_process_native_message(
Server *s,
const void *buffer, size_t buffer_size,
struct ucred *ucred,
struct timeval *tv,
const char *label, size_t label_len) {
struct iovec *iovec = NULL;
unsigned n = 0, m = 0, j, tn = (unsigned) -1;
const char *p;
size_t remaining;
int priority = LOG_INFO;
char *identifier = NULL, *message = NULL;
assert(s);
assert(buffer || buffer_size == 0);
p = buffer;
remaining = buffer_size;
while (remaining > 0) {
const char *e, *q;
e = memchr(p, '\n', remaining);
if (!e) {
/* Trailing noise, let's ignore it, and flush what we collected */
log_debug("Received message with trailing noise, ignoring.");
break;
}
if (e == p) {
/* Entry separator */
server_dispatch_message(s, iovec, n, m, ucred, tv, label, label_len, NULL, priority);
n = 0;
priority = LOG_INFO;
p++;
remaining--;
continue;
}
if (*p == '.' || *p == '#') {
/* Ignore control commands for now, and
* comments too. */
remaining -= (e - p) + 1;
p = e + 1;
continue;
}
/* A property follows */
if (n+N_IOVEC_META_FIELDS >= m) {
struct iovec *c;
unsigned u;
u = MAX((n+N_IOVEC_META_FIELDS+1) * 2U, 4U);
c = realloc(iovec, u * sizeof(struct iovec));
if (!c) {
log_oom();
break;
}
iovec = c;
m = u;
}
q = memchr(p, '=', e - p);
if (q) {
if (valid_user_field(p, q - p)) {
size_t l;
l = e - p;
/* If the field name starts with an
* underscore, skip the variable,
* since that indidates a trusted
* field */
iovec[n].iov_base = (char*) p;
iovec[n].iov_len = l;
n++;
/* We need to determine the priority
* of this entry for the rate limiting
* logic */
if (l == 10 &&
memcmp(p, "PRIORITY=", 9) == 0 &&
p[9] >= '0' && p[9] <= '9')
priority = (priority & LOG_FACMASK) | (p[9] - '0');
else if (l == 17 &&
memcmp(p, "SYSLOG_FACILITY=", 16) == 0 &&
p[16] >= '0' && p[16] <= '9')
priority = (priority & LOG_PRIMASK) | ((p[16] - '0') << 3);
else if (l == 18 &&
memcmp(p, "SYSLOG_FACILITY=", 16) == 0 &&
p[16] >= '0' && p[16] <= '9' &&
p[17] >= '0' && p[17] <= '9')
priority = (priority & LOG_PRIMASK) | (((p[16] - '0')*10 + (p[17] - '0')) << 3);
else if (l >= 19 &&
memcmp(p, "SYSLOG_IDENTIFIER=", 18) == 0) {
char *t;
t = strndup(p + 18, l - 18);
if (t) {
free(identifier);
identifier = t;
}
} else if (l >= 8 &&
memcmp(p, "MESSAGE=", 8) == 0) {
char *t;
t = strndup(p + 8, l - 8);
if (t) {
free(message);
message = t;
}
}
}
remaining -= (e - p) + 1;
p = e + 1;
continue;
} else {
le64_t l_le;
uint64_t l;
char *k;
if (remaining < e - p + 1 + sizeof(uint64_t) + 1) {
log_debug("Failed to parse message, ignoring.");
break;
}
memcpy(&l_le, e + 1, sizeof(uint64_t));
memcpy(&l_le, e + 1, sizeof(uint64_t));
l = le64toh(l_le);
if (remaining < e - p + 1 + sizeof(uint64_t) + l + 1 ||
e[1+sizeof(uint64_t)+l] != '\n') {
log_debug("Failed to parse message, ignoring.");
break;
}
memcpy(k, p, e - p);
k[e - p] = '=';
memcpy(k + (e - p) + 1, e + 1 + sizeof(uint64_t), l);
if (valid_user_field(p, e - p)) {
iovec[n].iov_base = k;
iovec[n].iov_len = (e - p) + 1 + l;
n++;
} else
free(k);
remaining -= (e - p) + 1 + sizeof(uint64_t) + l + 1;
p = e + 1 + sizeof(uint64_t) + l + 1;
}
}
if (n <= 0)
goto finish;
tn = n++;
IOVEC_SET_STRING(iovec[tn], "_TRANSPORT=journal");
if (message) {
if (s->forward_to_syslog)
server_forward_syslog(s, priority, identifier, message, ucred, tv);
if (s->forward_to_kmsg)
server_forward_kmsg(s, priority, identifier, message, ucred);
if (s->forward_to_console)
server_forward_console(s, priority, identifier, message, ucred);
}
server_dispatch_message(s, iovec, n, m, ucred, tv, label, label_len, NULL, priority);
finish:
for (j = 0; j < n; j++) {
if (j == tn)
continue;
if (iovec[j].iov_base < buffer ||
(const uint8_t*) iovec[j].iov_base >= (const uint8_t*) buffer + buffer_size)
free(iovec[j].iov_base);
}
free(iovec);
free(identifier);
free(message);
}
Vulnerability Type: DoS Exec Code Overflow
CWE ID: CWE-189
Summary: Integer overflow in the valid_user_field function in journal/journald-native.c in systemd allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a large journal data field, which triggers a heap-based buffer overflow.
Commit Message: | High | 164,658 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: sp<IMemoryHeap> BpMemory::getMemory(ssize_t* offset, size_t* size) const
{
if (mHeap == 0) {
Parcel data, reply;
data.writeInterfaceToken(IMemory::getInterfaceDescriptor());
if (remote()->transact(GET_MEMORY, data, &reply) == NO_ERROR) {
sp<IBinder> heap = reply.readStrongBinder();
ssize_t o = reply.readInt32();
size_t s = reply.readInt32();
if (heap != 0) {
mHeap = interface_cast<IMemoryHeap>(heap);
if (mHeap != 0) {
mOffset = o;
mSize = s;
}
}
}
}
if (offset) *offset = mOffset;
if (size) *size = mSize;
return mHeap;
}
Vulnerability Type: +Priv
CWE ID: CWE-264
Summary: libs/binder/IMemory.cpp in the IMemory Native Interface in Android 4.x before 4.4.4, 5.0.x before 5.0.2, 5.1.x before 5.1.1, and 6.x before 2016-04-01 does not properly consider the heap size, which allows attackers to gain privileges via a crafted application, as demonstrated by obtaining Signature or SignatureOrSystem access, aka internal bug 26877992.
Commit Message: Sanity check IMemory access versus underlying mmap
Bug 26877992
Change-Id: Ibbf4b1061e4675e4e96bc944a865b53eaf6984fe
| High | 173,906 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static NOINLINE char *xmalloc_optname_optval(uint8_t *option, const struct dhcp_optflag *optflag, const char *opt_name)
{
unsigned upper_length;
int len, type, optlen;
char *dest, *ret;
/* option points to OPT_DATA, need to go back to get OPT_LEN */
len = option[-OPT_DATA + OPT_LEN];
type = optflag->flags & OPTION_TYPE_MASK;
optlen = dhcp_option_lengths[type];
upper_length = len_of_option_as_string[type]
* ((unsigned)(len + optlen - 1) / (unsigned)optlen);
dest = ret = xmalloc(upper_length + strlen(opt_name) + 2);
dest += sprintf(ret, "%s=", opt_name);
while (len >= optlen) {
switch (type) {
case OPTION_IP:
case OPTION_IP_PAIR:
dest += sprint_nip(dest, "", option);
if (type == OPTION_IP)
break;
dest += sprint_nip(dest, "/", option + 4);
break;
case OPTION_U8:
dest += sprintf(dest, "%u", *option);
break;
case OPTION_U16: {
uint16_t val_u16;
move_from_unaligned16(val_u16, option);
dest += sprintf(dest, "%u", ntohs(val_u16));
break;
}
case OPTION_S32:
case OPTION_U32: {
uint32_t val_u32;
move_from_unaligned32(val_u32, option);
dest += sprintf(dest, type == OPTION_U32 ? "%lu" : "%ld", (unsigned long) ntohl(val_u32));
break;
}
/* Note: options which use 'return' instead of 'break'
* (for example, OPTION_STRING) skip the code which handles
* the case of list of options.
*/
case OPTION_STRING:
case OPTION_STRING_HOST:
memcpy(dest, option, len);
dest[len] = '\0';
if (type == OPTION_STRING_HOST && !good_hostname(dest))
safe_strncpy(dest, "bad", len);
return ret;
case OPTION_STATIC_ROUTES: {
/* Option binary format:
* mask [one byte, 0..32]
* ip [big endian, 0..4 bytes depending on mask]
* router [big endian, 4 bytes]
* may be repeated
*
* We convert it to a string "IP/MASK ROUTER IP2/MASK2 ROUTER2"
*/
const char *pfx = "";
while (len >= 1 + 4) { /* mask + 0-byte ip + router */
uint32_t nip;
uint8_t *p;
unsigned mask;
int bytes;
mask = *option++;
if (mask > 32)
break;
len--;
nip = 0;
p = (void*) &nip;
bytes = (mask + 7) / 8; /* 0 -> 0, 1..8 -> 1, 9..16 -> 2 etc */
while (--bytes >= 0) {
*p++ = *option++;
len--;
}
if (len < 4)
break;
/* print ip/mask */
dest += sprint_nip(dest, pfx, (void*) &nip);
pfx = " ";
dest += sprintf(dest, "/%u ", mask);
/* print router */
dest += sprint_nip(dest, "", option);
option += 4;
len -= 4;
}
return ret;
}
case OPTION_6RD:
/* Option binary format (see RFC 5969):
* 0 1 2 3
* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | OPTION_6RD | option-length | IPv4MaskLen | 6rdPrefixLen |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | 6rdPrefix |
* ... (16 octets) ...
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* ... 6rdBRIPv4Address(es) ...
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* We convert it to a string
* "IPv4MaskLen 6rdPrefixLen 6rdPrefix 6rdBRIPv4Address..."
*
* Sanity check: ensure that our length is at least 22 bytes, that
* IPv4MaskLen <= 32,
* 6rdPrefixLen <= 128,
* 6rdPrefixLen + (32 - IPv4MaskLen) <= 128
* (2nd condition need no check - it follows from 1st and 3rd).
* Else, return envvar with empty value ("optname=")
*/
if (len >= (1 + 1 + 16 + 4)
&& option[0] <= 32
&& (option[1] + 32 - option[0]) <= 128
) {
/* IPv4MaskLen */
dest += sprintf(dest, "%u ", *option++);
/* 6rdPrefixLen */
dest += sprintf(dest, "%u ", *option++);
/* 6rdPrefix */
dest += sprint_nip6(dest, /* "", */ option);
option += 16;
len -= 1 + 1 + 16 + 4;
/* "+ 4" above corresponds to the length of IPv4 addr
* we consume in the loop below */
while (1) {
/* 6rdBRIPv4Address(es) */
dest += sprint_nip(dest, " ", option);
option += 4;
len -= 4; /* do we have yet another 4+ bytes? */
if (len < 0)
break; /* no */
}
}
return ret;
#if ENABLE_FEATURE_UDHCP_RFC3397
case OPTION_DNS_STRING:
/* unpack option into dest; use ret for prefix (i.e., "optname=") */
dest = dname_dec(option, len, ret);
if (dest) {
free(ret);
return dest;
}
/* error. return "optname=" string */
return ret;
case OPTION_SIP_SERVERS:
/* Option binary format:
* type: byte
* type=0: domain names, dns-compressed
* type=1: IP addrs
*/
option++;
len--;
if (option[-1] == 0) {
dest = dname_dec(option, len, ret);
if (dest) {
free(ret);
return dest;
}
} else
if (option[-1] == 1) {
const char *pfx = "";
while (1) {
len -= 4;
if (len < 0)
break;
dest += sprint_nip(dest, pfx, option);
pfx = " ";
option += 4;
}
}
return ret;
#endif
} /* switch */
/* If we are here, try to format any remaining data
* in the option as another, similarly-formatted option
*/
option += optlen;
len -= optlen;
if (len < optlen /* || !(optflag->flags & OPTION_LIST) */)
break;
*dest++ = ' ';
*dest = '\0';
} /* while */
return ret;
}
Vulnerability Type: Overflow
CWE ID: CWE-119
Summary: Heap-based buffer overflow in the DHCP client (udhcpc) in BusyBox before 1.25.0 allows remote attackers to have unspecified impact via vectors involving OPTION_6RD parsing.
Commit Message: | High | 165,349 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: PHP_FUNCTION(imagecrop)
{
zval *IM;
gdImagePtr im;
gdImagePtr im_crop;
gdRect rect;
zval *z_rect;
zval **tmp;
if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "ra", &IM, &z_rect) == FAILURE) {
return;
}
ZEND_FETCH_RESOURCE(im, gdImagePtr, &IM, -1, "Image", le_gd);
if (zend_hash_find(HASH_OF(z_rect), "x", sizeof("x"), (void **)&tmp) != FAILURE) {
rect.x = Z_LVAL_PP(tmp);
} else {
php_error_docref(NULL TSRMLS_CC, E_WARNING, "Missing x position");
RETURN_FALSE;
}
if (zend_hash_find(HASH_OF(z_rect), "y", sizeof("x"), (void **)&tmp) != FAILURE) {
rect.y = Z_LVAL_PP(tmp);
} else {
php_error_docref(NULL TSRMLS_CC, E_WARNING, "Missing y position");
RETURN_FALSE;
}
if (zend_hash_find(HASH_OF(z_rect), "width", sizeof("width"), (void **)&tmp) != FAILURE) {
rect.width = Z_LVAL_PP(tmp);
} else {
php_error_docref(NULL TSRMLS_CC, E_WARNING, "Missing width");
RETURN_FALSE;
}
if (zend_hash_find(HASH_OF(z_rect), "height", sizeof("height"), (void **)&tmp) != FAILURE) {
rect.height = Z_LVAL_PP(tmp);
} else {
php_error_docref(NULL TSRMLS_CC, E_WARNING, "Missing height");
RETURN_FALSE;
}
im_crop = gdImageCrop(im, &rect);
if (im_crop == NULL) {
RETURN_FALSE;
} else {
ZEND_REGISTER_RESOURCE(return_value, im_crop, le_gd);
}
}
Vulnerability Type: +Info
CWE ID: CWE-189
Summary: ext/gd/gd.c in PHP 5.5.x before 5.5.9 does not check data types, which might allow remote attackers to obtain sensitive information by using a (1) string or (2) array data type in place of a numeric data type, as demonstrated by an imagecrop function call with a string for the x dimension value, a different vulnerability than CVE-2013-7226.
Commit Message: Fixed bug #66356 (Heap Overflow Vulnerability in imagecrop())
And also fixed the bug: arguments are altered after some calls | Medium | 166,427 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void fdct8x8_ref(const int16_t *in, int16_t *out, int stride, int tx_type) {
vp9_fdct8x8_c(in, out, stride);
}
Vulnerability Type: DoS Exec Code Overflow Mem. Corr.
CWE ID: CWE-119
Summary: libvpx in mediaserver in Android 4.x before 4.4.4, 5.x before 5.1.1 LMY49H, and 6.0 before 2016-03-01 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted media file, related to libwebm/mkvparser.cpp and other files, aka internal bug 23452792.
Commit Message: Merge Conflict Fix CL to lmp-mr1-release for ag/849478
DO NOT MERGE - libvpx: Pull from upstream
Current HEAD: 7105df53d7dc13d5e575bc8df714ec8d1da36b06
BUG=23452792
Change-Id: Ic78176fc369e0bacc71d423e0e2e6075d004aaec
| High | 174,564 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static MagickBooleanType WriteGROUP4Image(const ImageInfo *image_info,
Image *image)
{
char
filename[MaxTextExtent];
FILE
*file;
Image
*huffman_image;
ImageInfo
*write_info;
int
unique_file;
MagickBooleanType
status;
register ssize_t
i;
ssize_t
count;
TIFF
*tiff;
toff_t
*byte_count,
strip_size;
unsigned char
*buffer;
/*
Write image as CCITT Group4 TIFF image to a temporary file.
*/
assert(image_info != (const ImageInfo *) NULL);
assert(image_info->signature == MagickSignature);
assert(image != (Image *) NULL);
assert(image->signature == MagickSignature);
if (image->debug != MagickFalse)
(void) LogMagickEvent(TraceEvent,GetMagickModule(),"%s",image->filename);
status=OpenBlob(image_info,image,WriteBinaryBlobMode,&image->exception);
if (status == MagickFalse)
return(status);
huffman_image=CloneImage(image,0,0,MagickTrue,&image->exception);
if (huffman_image == (Image *) NULL)
{
(void) CloseBlob(image);
return(MagickFalse);
}
huffman_image->endian=MSBEndian;
file=(FILE *) NULL;
unique_file=AcquireUniqueFileResource(filename);
if (unique_file != -1)
file=fdopen(unique_file,"wb");
if ((unique_file == -1) || (file == (FILE *) NULL))
{
ThrowFileException(&image->exception,FileOpenError,
"UnableToCreateTemporaryFile",filename);
return(MagickFalse);
}
(void) FormatLocaleString(huffman_image->filename,MaxTextExtent,"tiff:%s",
filename);
(void) SetImageType(huffman_image,BilevelType);
write_info=CloneImageInfo((ImageInfo *) NULL);
SetImageInfoFile(write_info,file);
(void) SetImageType(image,BilevelType);
(void) SetImageDepth(image,1);
write_info->compression=Group4Compression;
write_info->type=BilevelType;
(void) SetImageOption(write_info,"quantum:polarity","min-is-white");
status=WriteTIFFImage(write_info,huffman_image);
(void) fflush(file);
write_info=DestroyImageInfo(write_info);
if (status == MagickFalse)
{
InheritException(&image->exception,&huffman_image->exception);
huffman_image=DestroyImage(huffman_image);
(void) fclose(file);
(void) RelinquishUniqueFileResource(filename);
return(MagickFalse);
}
tiff=TIFFOpen(filename,"rb");
if (tiff == (TIFF *) NULL)
{
huffman_image=DestroyImage(huffman_image);
(void) fclose(file);
(void) RelinquishUniqueFileResource(filename);
ThrowFileException(&image->exception,FileOpenError,"UnableToOpenFile",
image_info->filename);
return(MagickFalse);
}
/*
Allocate raw strip buffer.
*/
if (TIFFGetField(tiff,TIFFTAG_STRIPBYTECOUNTS,&byte_count) != 1)
{
TIFFClose(tiff);
huffman_image=DestroyImage(huffman_image);
(void) fclose(file);
(void) RelinquishUniqueFileResource(filename);
return(MagickFalse);
}
strip_size=byte_count[0];
for (i=1; i < (ssize_t) TIFFNumberOfStrips(tiff); i++)
if (byte_count[i] > strip_size)
strip_size=byte_count[i];
buffer=(unsigned char *) AcquireQuantumMemory((size_t) strip_size,
sizeof(*buffer));
if (buffer == (unsigned char *) NULL)
{
TIFFClose(tiff);
huffman_image=DestroyImage(huffman_image);
(void) fclose(file);
(void) RelinquishUniqueFileResource(filename);
ThrowBinaryException(ResourceLimitError,"MemoryAllocationFailed",
image_info->filename);
}
/*
Compress runlength encoded to 2D Huffman pixels.
*/
for (i=0; i < (ssize_t) TIFFNumberOfStrips(tiff); i++)
{
count=(ssize_t) TIFFReadRawStrip(tiff,(uint32) i,buffer,strip_size);
if (WriteBlob(image,(size_t) count,buffer) != count)
status=MagickFalse;
}
buffer=(unsigned char *) RelinquishMagickMemory(buffer);
TIFFClose(tiff);
huffman_image=DestroyImage(huffman_image);
(void) fclose(file);
(void) RelinquishUniqueFileResource(filename);
(void) CloseBlob(image);
return(status);
}
Vulnerability Type: DoS Overflow
CWE ID: CWE-119
Summary: Buffer overflow in the WriteGROUP4Image function in coders/tiff.c in ImageMagick before 6.9.5-8 allows remote attackers to cause a denial of service (application crash) or have other unspecified impact via a crafted file.
Commit Message: Prevent buffer overflow in SIXEL, PDB, MAP, and CALS coders (bug report from Donghai Zhu) | Medium | 168,636 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static int simulate_rdhwr(struct pt_regs *regs, unsigned int opcode)
{
struct thread_info *ti = task_thread_info(current);
if ((opcode & OPCODE) == SPEC3 && (opcode & FUNC) == RDHWR) {
int rd = (opcode & RD) >> 11;
int rt = (opcode & RT) >> 16;
perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS,
1, 0, regs, 0);
switch (rd) {
case 0: /* CPU number */
regs->regs[rt] = smp_processor_id();
return 0;
case 1: /* SYNCI length */
regs->regs[rt] = min(current_cpu_data.dcache.linesz,
current_cpu_data.icache.linesz);
return 0;
case 2: /* Read count register */
regs->regs[rt] = read_c0_count();
return 0;
case 3: /* Count register resolution */
switch (current_cpu_data.cputype) {
case CPU_20KC:
case CPU_25KF:
regs->regs[rt] = 1;
break;
default:
regs->regs[rt] = 2;
}
return 0;
case 29:
regs->regs[rt] = ti->tp_value;
return 0;
default:
return -1;
}
}
/* Not ours. */
return -1;
}
Vulnerability Type: DoS Overflow
CWE ID: CWE-399
Summary: The Performance Events subsystem in the Linux kernel before 3.1 does not properly handle event overflows associated with PERF_COUNT_SW_CPU_CLOCK events, which allows local users to cause a denial of service (system hang) via a crafted application.
Commit Message: perf: Remove the nmi parameter from the swevent and overflow interface
The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.
For the various event classes:
- hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
the PMI-tail (ARM etc.)
- tracepoint: nmi=0; since tracepoint could be from NMI context.
- software: nmi=[0,1]; some, like the schedule thing cannot
perform wakeups, and hence need 0.
As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).
The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.
Signed-off-by: Peter Zijlstra <[email protected]>
Cc: Michael Cree <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Deng-Cheng Zhu <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Eric B Munson <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Paul Mundt <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jason Wessel <[email protected]>
Cc: Don Zickus <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Ingo Molnar <[email protected]> | Medium | 165,782 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu)
{
u32 data, tpr;
int max_irr, max_isr;
struct kvm_lapic *apic = vcpu->arch.apic;
void *vapic;
apic_sync_pv_eoi_to_guest(vcpu, apic);
if (!test_bit(KVM_APIC_CHECK_VAPIC, &vcpu->arch.apic_attention))
return;
tpr = kvm_apic_get_reg(apic, APIC_TASKPRI) & 0xff;
max_irr = apic_find_highest_irr(apic);
if (max_irr < 0)
max_irr = 0;
max_isr = apic_find_highest_isr(apic);
if (max_isr < 0)
max_isr = 0;
data = (tpr & 0xff) | ((max_isr & 0xf0) << 8) | (max_irr << 24);
vapic = kmap_atomic(vcpu->arch.apic->vapic_page);
*(u32 *)(vapic + offset_in_page(vcpu->arch.apic->vapic_addr)) = data;
kunmap_atomic(vapic);
}
Vulnerability Type: DoS +Priv
CWE ID: CWE-20
Summary: The KVM subsystem in the Linux kernel through 3.12.5 allows local users to gain privileges or cause a denial of service (system crash) via a VAPIC synchronization operation involving a page-end address.
Commit Message: KVM: x86: Convert vapic synchronization to _cached functions (CVE-2013-6368)
In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the
potential to corrupt kernel memory if userspace provides an address that
is at the end of a page. This patches concerts those functions to use
kvm_write_guest_cached and kvm_read_guest_cached. It also checks the
vapic_address specified by userspace during ioctl processing and returns
an error to userspace if the address is not a valid GPA.
This is generally not guest triggerable, because the required write is
done by firmware that runs before the guest. Also, it only affects AMD
processors and oldish Intel that do not have the FlexPriority feature
(unless you disable FlexPriority, of course; then newer processors are
also affected).
Fixes: b93463aa59d6 ('KVM: Accelerated apic support')
Reported-by: Andrew Honig <[email protected]>
Cc: [email protected]
Signed-off-by: Andrew Honig <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]> | Medium | 165,946 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void SaveCardBubbleControllerImpl::ShowBubbleForUpload(
const CreditCard& card,
std::unique_ptr<base::DictionaryValue> legal_message,
bool should_cvc_be_requested,
const base::Closure& save_card_callback) {
is_uploading_ = true;
is_reshow_ = false;
should_cvc_be_requested_ = should_cvc_be_requested;
AutofillMetrics::LogSaveCardPromptMetric(
AutofillMetrics::SAVE_CARD_PROMPT_SHOW_REQUESTED, is_uploading_,
is_reshow_,
pref_service_->GetInteger(
prefs::kAutofillAcceptSaveCreditCardPromptState));
if (!LegalMessageLine::Parse(*legal_message, &legal_message_lines_)) {
AutofillMetrics::LogSaveCardPromptMetric(
AutofillMetrics::SAVE_CARD_PROMPT_END_INVALID_LEGAL_MESSAGE,
is_uploading_, is_reshow_,
pref_service_->GetInteger(
prefs::kAutofillAcceptSaveCreditCardPromptState));
return;
}
card_ = card;
save_card_callback_ = save_card_callback;
ShowBubble();
}
Vulnerability Type:
CWE ID: CWE-416
Summary: A use after free in credit card autofill in Google Chrome prior to 59.0.3071.86 for Linux and Windows allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page.
Commit Message: [autofill] Avoid duplicate instances of the SaveCardBubble.
autofill::SaveCardBubbleControllerImpl::ShowBubble() expects
(via DCHECK) to only be called when the save card bubble is
not already visible. This constraint is violated if the user
clicks multiple times on a submit button.
If the underlying page goes away, the last SaveCardBubbleView
created by the controller will be automatically cleaned up,
but any others are left visible on the screen... holding a
refence to a possibly-deleted controller.
This CL early exits the ShowBubbleFor*** and ReshowBubble logic
if the bubble is already visible.
BUG=708819
Review-Url: https://codereview.chromium.org/2862933002
Cr-Commit-Position: refs/heads/master@{#469768} | Medium | 172,386 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static void php_wddx_process_data(void *user_data, const XML_Char *s, int len)
{
st_entry *ent;
wddx_stack *stack = (wddx_stack *)user_data;
TSRMLS_FETCH();
if (!wddx_stack_is_empty(stack) && !stack->done) {
wddx_stack_top(stack, (void**)&ent);
switch (ent->type) {
case ST_STRING:
if (Z_STRLEN_P(ent->data) == 0) {
STR_FREE(Z_STRVAL_P(ent->data));
Z_STRVAL_P(ent->data) = estrndup(s, len);
Z_STRLEN_P(ent->data) = len;
} else {
Z_STRVAL_P(ent->data) = erealloc(Z_STRVAL_P(ent->data), Z_STRLEN_P(ent->data) + len + 1);
memcpy(Z_STRVAL_P(ent->data) + Z_STRLEN_P(ent->data), s, len);
Z_STRLEN_P(ent->data) += len;
Z_STRVAL_P(ent->data)[Z_STRLEN_P(ent->data)] = '\0';
}
break;
case ST_BINARY:
if (Z_STRLEN_P(ent->data) == 0) {
STR_FREE(Z_STRVAL_P(ent->data));
Z_STRVAL_P(ent->data) = estrndup(s, len + 1);
} else {
Z_STRVAL_P(ent->data) = erealloc(Z_STRVAL_P(ent->data), Z_STRLEN_P(ent->data) + len + 1);
memcpy(Z_STRVAL_P(ent->data) + Z_STRLEN_P(ent->data), s, len);
}
Z_STRLEN_P(ent->data) += len;
Z_STRVAL_P(ent->data)[Z_STRLEN_P(ent->data)] = '\0';
break;
case ST_NUMBER:
Z_TYPE_P(ent->data) = IS_STRING;
Z_STRLEN_P(ent->data) = len;
Z_STRVAL_P(ent->data) = estrndup(s, len);
convert_scalar_to_number(ent->data TSRMLS_CC);
break;
case ST_BOOLEAN:
if (!strcmp(s, "true")) {
Z_LVAL_P(ent->data) = 1;
} else if (!strcmp(s, "false")) {
Z_LVAL_P(ent->data) = 0;
} else {
zval_ptr_dtor(&ent->data);
if (ent->varname) {
efree(ent->varname);
}
ent->data = NULL;
}
break;
case ST_DATETIME: {
char *tmp;
tmp = emalloc(len + 1);
memcpy(tmp, s, len);
tmp[len] = '\0';
Z_LVAL_P(ent->data) = php_parse_date(tmp, NULL);
/* date out of range < 1969 or > 2038 */
if (Z_LVAL_P(ent->data) == -1) {
Z_TYPE_P(ent->data) = IS_STRING;
Z_STRLEN_P(ent->data) = len;
Z_STRVAL_P(ent->data) = estrndup(s, len);
}
efree(tmp);
}
break;
default:
break;
}
}
}
Vulnerability Type: DoS Exec Code
CWE ID: CWE-415
Summary: Double free vulnerability in the php_wddx_process_data function in wddx.c in the WDDX extension in PHP before 5.5.37, 5.6.x before 5.6.23, and 7.x before 7.0.8 allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via crafted XML data that is mishandled in a wddx_deserialize call.
Commit Message: Fix bug #72340: Double Free Courruption in wddx_deserialize | High | 167,024 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void color_sycc_to_rgb(opj_image_t *img)
{
if(img->numcomps < 3)
{
img->color_space = OPJ_CLRSPC_GRAY;
return;
}
if((img->comps[0].dx == 1)
&& (img->comps[1].dx == 2)
&& (img->comps[2].dx == 2)
&& (img->comps[0].dy == 1)
&& (img->comps[1].dy == 2)
&& (img->comps[2].dy == 2))/* horizontal and vertical sub-sample */
{
sycc420_to_rgb(img);
}
else
if((img->comps[0].dx == 1)
&& (img->comps[1].dx == 2)
&& (img->comps[2].dx == 2)
&& (img->comps[0].dy == 1)
&& (img->comps[1].dy == 1)
&& (img->comps[2].dy == 1))/* horizontal sub-sample only */
{
sycc422_to_rgb(img);
}
else
if((img->comps[0].dx == 1)
&& (img->comps[1].dx == 1)
&& (img->comps[2].dx == 1)
&& (img->comps[0].dy == 1)
&& (img->comps[1].dy == 1)
&& (img->comps[2].dy == 1))/* no sub-sample */
{
sycc444_to_rgb(img);
}
else
{
fprintf(stderr,"%s:%d:color_sycc_to_rgb\n\tCAN NOT CONVERT\n", __FILE__,__LINE__);
return;
}
img->color_space = OPJ_CLRSPC_SRGB;
}/* color_sycc_to_rgb() */
Vulnerability Type: DoS
CWE ID: CWE-125
Summary: The sycc422_t_rgb function in common/color.c in OpenJPEG before 2.1.1 allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted jpeg2000 file.
Commit Message: Fix Out-Of-Bounds Read in sycc42x_to_rgb function (#745)
42x Images with an odd x0/y0 lead to subsampled component starting at the
2nd column/line.
That is offset = comp->dx * comp->x0 - image->x0 = 1
Fix #726 | Medium | 168,838 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: nfs4_state_set_mode_locked(struct nfs4_state *state, mode_t mode)
{
if (state->state == mode)
return;
/* NB! List reordering - see the reclaim code for why. */
if ((mode & FMODE_WRITE) != (state->state & FMODE_WRITE)) {
if (mode & FMODE_WRITE)
list_move(&state->open_states, &state->owner->so_states);
else
list_move_tail(&state->open_states, &state->owner->so_states);
}
state->state = mode;
}
Vulnerability Type: DoS
CWE ID:
Summary: The encode_share_access function in fs/nfs/nfs4xdr.c in the Linux kernel before 2.6.29 allows local users to cause a denial of service (BUG and system crash) by using the mknod system call with a pathname on an NFSv4 filesystem.
Commit Message: NFSv4: Convert the open and close ops to use fmode
Signed-off-by: Trond Myklebust <[email protected]> | Medium | 165,712 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: __u32 secure_tcpv6_sequence_number(__be32 *saddr, __be32 *daddr,
__be16 sport, __be16 dport)
{
__u32 seq;
__u32 hash[12];
struct keydata *keyptr = get_keyptr();
/* The procedure is the same as for IPv4, but addresses are longer.
* Thus we must use twothirdsMD4Transform.
*/
memcpy(hash, saddr, 16);
hash[4] = ((__force u16)sport << 16) + (__force u16)dport;
memcpy(&hash[5], keyptr->secret, sizeof(__u32) * 7);
seq = twothirdsMD4Transform((const __u32 *)daddr, hash) & HASH_MASK;
seq += keyptr->count;
seq += ktime_to_ns(ktime_get_real());
return seq;
}
Vulnerability Type: DoS
CWE ID:
Summary: The (1) IPv4 and (2) IPv6 implementations in the Linux kernel before 3.1 use a modified MD4 algorithm to generate sequence numbers and Fragment Identification values, which makes it easier for remote attackers to cause a denial of service (disrupted networking) or hijack network sessions by predicting these values and sending crafted packets.
Commit Message: net: Compute protocol sequence numbers and fragment IDs using MD5.
Computers have become a lot faster since we compromised on the
partial MD4 hash which we use currently for performance reasons.
MD5 is a much safer choice, and is inline with both RFC1948 and
other ISS generators (OpenBSD, Solaris, etc.)
Furthermore, only having 24-bits of the sequence number be truly
unpredictable is a very serious limitation. So the periodic
regeneration and 8-bit counter have been removed. We compute and
use a full 32-bit sequence number.
For ipv6, DCCP was found to use a 32-bit truncated initial sequence
number (it needs 43-bits) and that is fixed here as well.
Reported-by: Dan Kaminsky <[email protected]>
Tested-by: Willy Tarreau <[email protected]>
Signed-off-by: David S. Miller <[email protected]> | Medium | 165,769 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt)
{
struct svcxprt_rdma *listen_rdma;
struct svcxprt_rdma *newxprt = NULL;
struct rdma_conn_param conn_param;
struct rpcrdma_connect_private pmsg;
struct ib_qp_init_attr qp_attr;
struct ib_device *dev;
struct sockaddr *sap;
unsigned int i;
int ret = 0;
listen_rdma = container_of(xprt, struct svcxprt_rdma, sc_xprt);
clear_bit(XPT_CONN, &xprt->xpt_flags);
/* Get the next entry off the accept list */
spin_lock_bh(&listen_rdma->sc_lock);
if (!list_empty(&listen_rdma->sc_accept_q)) {
newxprt = list_entry(listen_rdma->sc_accept_q.next,
struct svcxprt_rdma, sc_accept_q);
list_del_init(&newxprt->sc_accept_q);
}
if (!list_empty(&listen_rdma->sc_accept_q))
set_bit(XPT_CONN, &listen_rdma->sc_xprt.xpt_flags);
spin_unlock_bh(&listen_rdma->sc_lock);
if (!newxprt)
return NULL;
dprintk("svcrdma: newxprt from accept queue = %p, cm_id=%p\n",
newxprt, newxprt->sc_cm_id);
dev = newxprt->sc_cm_id->device;
/* Qualify the transport resource defaults with the
* capabilities of this particular device */
newxprt->sc_max_sge = min((size_t)dev->attrs.max_sge,
(size_t)RPCSVC_MAXPAGES);
newxprt->sc_max_sge_rd = min_t(size_t, dev->attrs.max_sge_rd,
RPCSVC_MAXPAGES);
newxprt->sc_max_req_size = svcrdma_max_req_size;
newxprt->sc_max_requests = min_t(u32, dev->attrs.max_qp_wr,
svcrdma_max_requests);
newxprt->sc_fc_credits = cpu_to_be32(newxprt->sc_max_requests);
newxprt->sc_max_bc_requests = min_t(u32, dev->attrs.max_qp_wr,
svcrdma_max_bc_requests);
newxprt->sc_rq_depth = newxprt->sc_max_requests +
newxprt->sc_max_bc_requests;
newxprt->sc_sq_depth = RPCRDMA_SQ_DEPTH_MULT * newxprt->sc_rq_depth;
atomic_set(&newxprt->sc_sq_avail, newxprt->sc_sq_depth);
if (!svc_rdma_prealloc_ctxts(newxprt))
goto errout;
if (!svc_rdma_prealloc_maps(newxprt))
goto errout;
/*
* Limit ORD based on client limit, local device limit, and
* configured svcrdma limit.
*/
newxprt->sc_ord = min_t(size_t, dev->attrs.max_qp_rd_atom, newxprt->sc_ord);
newxprt->sc_ord = min_t(size_t, svcrdma_ord, newxprt->sc_ord);
newxprt->sc_pd = ib_alloc_pd(dev, 0);
if (IS_ERR(newxprt->sc_pd)) {
dprintk("svcrdma: error creating PD for connect request\n");
goto errout;
}
newxprt->sc_sq_cq = ib_alloc_cq(dev, newxprt, newxprt->sc_sq_depth,
0, IB_POLL_WORKQUEUE);
if (IS_ERR(newxprt->sc_sq_cq)) {
dprintk("svcrdma: error creating SQ CQ for connect request\n");
goto errout;
}
newxprt->sc_rq_cq = ib_alloc_cq(dev, newxprt, newxprt->sc_rq_depth,
0, IB_POLL_WORKQUEUE);
if (IS_ERR(newxprt->sc_rq_cq)) {
dprintk("svcrdma: error creating RQ CQ for connect request\n");
goto errout;
}
memset(&qp_attr, 0, sizeof qp_attr);
qp_attr.event_handler = qp_event_handler;
qp_attr.qp_context = &newxprt->sc_xprt;
qp_attr.cap.max_send_wr = newxprt->sc_sq_depth;
qp_attr.cap.max_recv_wr = newxprt->sc_rq_depth;
qp_attr.cap.max_send_sge = newxprt->sc_max_sge;
qp_attr.cap.max_recv_sge = newxprt->sc_max_sge;
qp_attr.sq_sig_type = IB_SIGNAL_REQ_WR;
qp_attr.qp_type = IB_QPT_RC;
qp_attr.send_cq = newxprt->sc_sq_cq;
qp_attr.recv_cq = newxprt->sc_rq_cq;
dprintk("svcrdma: newxprt->sc_cm_id=%p, newxprt->sc_pd=%p\n",
newxprt->sc_cm_id, newxprt->sc_pd);
dprintk(" cap.max_send_wr = %d, cap.max_recv_wr = %d\n",
qp_attr.cap.max_send_wr, qp_attr.cap.max_recv_wr);
dprintk(" cap.max_send_sge = %d, cap.max_recv_sge = %d\n",
qp_attr.cap.max_send_sge, qp_attr.cap.max_recv_sge);
ret = rdma_create_qp(newxprt->sc_cm_id, newxprt->sc_pd, &qp_attr);
if (ret) {
dprintk("svcrdma: failed to create QP, ret=%d\n", ret);
goto errout;
}
newxprt->sc_qp = newxprt->sc_cm_id->qp;
/*
* Use the most secure set of MR resources based on the
* transport type and available memory management features in
* the device. Here's the table implemented below:
*
* Fast Global DMA Remote WR
* Reg LKEY MR Access
* Sup'd Sup'd Needed Needed
*
* IWARP N N Y Y
* N Y Y Y
* Y N Y N
* Y Y N -
*
* IB N N Y N
* N Y N -
* Y N Y N
* Y Y N -
*
* NB: iWARP requires remote write access for the data sink
* of an RDMA_READ. IB does not.
*/
newxprt->sc_reader = rdma_read_chunk_lcl;
if (dev->attrs.device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS) {
newxprt->sc_frmr_pg_list_len =
dev->attrs.max_fast_reg_page_list_len;
newxprt->sc_dev_caps |= SVCRDMA_DEVCAP_FAST_REG;
newxprt->sc_reader = rdma_read_chunk_frmr;
} else
newxprt->sc_snd_w_inv = false;
/*
* Determine if a DMA MR is required and if so, what privs are required
*/
if (!rdma_protocol_iwarp(dev, newxprt->sc_cm_id->port_num) &&
!rdma_ib_or_roce(dev, newxprt->sc_cm_id->port_num))
goto errout;
if (rdma_protocol_iwarp(dev, newxprt->sc_cm_id->port_num))
newxprt->sc_dev_caps |= SVCRDMA_DEVCAP_READ_W_INV;
/* Post receive buffers */
for (i = 0; i < newxprt->sc_max_requests; i++) {
ret = svc_rdma_post_recv(newxprt, GFP_KERNEL);
if (ret) {
dprintk("svcrdma: failure posting receive buffers\n");
goto errout;
}
}
/* Swap out the handler */
newxprt->sc_cm_id->event_handler = rdma_cma_handler;
/* Construct RDMA-CM private message */
pmsg.cp_magic = rpcrdma_cmp_magic;
pmsg.cp_version = RPCRDMA_CMP_VERSION;
pmsg.cp_flags = 0;
pmsg.cp_send_size = pmsg.cp_recv_size =
rpcrdma_encode_buffer_size(newxprt->sc_max_req_size);
/* Accept Connection */
set_bit(RDMAXPRT_CONN_PENDING, &newxprt->sc_flags);
memset(&conn_param, 0, sizeof conn_param);
conn_param.responder_resources = 0;
conn_param.initiator_depth = newxprt->sc_ord;
conn_param.private_data = &pmsg;
conn_param.private_data_len = sizeof(pmsg);
ret = rdma_accept(newxprt->sc_cm_id, &conn_param);
if (ret) {
dprintk("svcrdma: failed to accept new connection, ret=%d\n",
ret);
goto errout;
}
dprintk("svcrdma: new connection %p accepted:\n", newxprt);
sap = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.src_addr;
dprintk(" local address : %pIS:%u\n", sap, rpc_get_port(sap));
sap = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.dst_addr;
dprintk(" remote address : %pIS:%u\n", sap, rpc_get_port(sap));
dprintk(" max_sge : %d\n", newxprt->sc_max_sge);
dprintk(" max_sge_rd : %d\n", newxprt->sc_max_sge_rd);
dprintk(" sq_depth : %d\n", newxprt->sc_sq_depth);
dprintk(" max_requests : %d\n", newxprt->sc_max_requests);
dprintk(" ord : %d\n", newxprt->sc_ord);
return &newxprt->sc_xprt;
errout:
dprintk("svcrdma: failure accepting new connection rc=%d.\n", ret);
/* Take a reference in case the DTO handler runs */
svc_xprt_get(&newxprt->sc_xprt);
if (newxprt->sc_qp && !IS_ERR(newxprt->sc_qp))
ib_destroy_qp(newxprt->sc_qp);
rdma_destroy_id(newxprt->sc_cm_id);
/* This call to put will destroy the transport */
svc_xprt_put(&newxprt->sc_xprt);
return NULL;
}
Vulnerability Type: DoS
CWE ID: CWE-404
Summary: The NFSv4 implementation in the Linux kernel through 4.11.1 allows local users to cause a denial of service (resource consumption) by leveraging improper channel callback shutdown when unmounting an NFSv4 filesystem, aka a *module reference and kernel daemon* leak.
Commit Message: Merge tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Another RDMA update from Chuck Lever, and a bunch of miscellaneous
bugfixes"
* tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd: Fix up the "supattr_exclcreat" attributes
nfsd: encoders mustn't use unitialized values in error cases
nfsd: fix undefined behavior in nfsd4_layout_verify
lockd: fix lockd shutdown race
NFSv4: Fix callback server shutdown
SUNRPC: Refactor svc_set_num_threads()
NFSv4.x/callback: Create the callback service through svc_create_pooled
lockd: remove redundant check on block
svcrdma: Clean out old XDR encoders
svcrdma: Remove the req_map cache
svcrdma: Remove unused RDMA Write completion handler
svcrdma: Reduce size of sge array in struct svc_rdma_op_ctxt
svcrdma: Clean up RPC-over-RDMA backchannel reply processing
svcrdma: Report Write/Reply chunk overruns
svcrdma: Clean up RDMA_ERROR path
svcrdma: Use rdma_rw API in RPC reply path
svcrdma: Introduce local rdma_rw API helpers
svcrdma: Clean up svc_rdma_get_inv_rkey()
svcrdma: Add helper to save pages under I/O
svcrdma: Eliminate RPCRDMA_SQ_DEPTH_MULT
... | Medium | 168,179 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static int rsa_builtin_keygen(RSA *rsa, int bits, BIGNUM *e_value,
BN_GENCB *cb)
{
BIGNUM *r0 = NULL, *r1 = NULL, *r2 = NULL, *r3 = NULL, *tmp;
int bitsp, bitsq, ok = -1, n = 0;
BN_CTX *ctx = NULL;
unsigned long error = 0;
/*
* When generating ridiculously small keys, we can get stuck
* continually regenerating the same prime values.
*/
if (bits < 16) {
ok = 0; /* we set our own err */
RSAerr(RSA_F_RSA_BUILTIN_KEYGEN, RSA_R_KEY_SIZE_TOO_SMALL);
goto err;
}
ctx = BN_CTX_new();
if (ctx == NULL)
goto err;
BN_CTX_start(ctx);
r0 = BN_CTX_get(ctx);
r1 = BN_CTX_get(ctx);
r2 = BN_CTX_get(ctx);
r3 = BN_CTX_get(ctx);
if (r3 == NULL)
goto err;
bitsp = (bits + 1) / 2;
bitsq = bits - bitsp;
/* We need the RSA components non-NULL */
if (!rsa->n && ((rsa->n = BN_new()) == NULL))
goto err;
if (!rsa->d && ((rsa->d = BN_secure_new()) == NULL))
goto err;
if (!rsa->e && ((rsa->e = BN_new()) == NULL))
goto err;
if (!rsa->p && ((rsa->p = BN_secure_new()) == NULL))
goto err;
if (!rsa->q && ((rsa->q = BN_secure_new()) == NULL))
goto err;
if (!rsa->dmp1 && ((rsa->dmp1 = BN_secure_new()) == NULL))
goto err;
if (!rsa->dmq1 && ((rsa->dmq1 = BN_secure_new()) == NULL))
goto err;
if (!rsa->iqmp && ((rsa->iqmp = BN_secure_new()) == NULL))
goto err;
if (BN_copy(rsa->e, e_value) == NULL)
goto err;
BN_set_flags(r2, BN_FLG_CONSTTIME);
/* generate p and q */
for (;;) {
if (!BN_sub(r2, rsa->p, BN_value_one()))
goto err;
ERR_set_mark();
if (BN_mod_inverse(r1, r2, rsa->e, ctx) != NULL) {
/* GCD == 1 since inverse exists */
break;
}
error = ERR_peek_last_error();
if (ERR_GET_LIB(error) == ERR_LIB_BN
&& ERR_GET_REASON(error) == BN_R_NO_INVERSE) {
/* GCD != 1 */
ERR_pop_to_mark();
} else {
goto err;
}
if (!BN_GENCB_call(cb, 2, n++))
goto err;
}
if (!BN_GENCB_call(cb, 3, 0))
goto err;
for (;;) {
do {
if (!BN_generate_prime_ex(rsa->q, bitsq, 0, NULL, NULL, cb))
goto err;
} while (BN_cmp(rsa->p, rsa->q) == 0);
if (!BN_sub(r2, rsa->q, BN_value_one()))
goto err;
ERR_set_mark();
if (BN_mod_inverse(r1, r2, rsa->e, ctx) != NULL) {
/* GCD == 1 since inverse exists */
break;
}
error = ERR_peek_last_error();
if (ERR_GET_LIB(error) == ERR_LIB_BN
&& ERR_GET_REASON(error) == BN_R_NO_INVERSE) {
/* GCD != 1 */
ERR_pop_to_mark();
} else {
goto err;
}
if (!BN_GENCB_call(cb, 2, n++))
goto err;
}
if (!BN_GENCB_call(cb, 3, 1))
goto err;
if (BN_cmp(rsa->p, rsa->q) < 0) {
tmp = rsa->p;
rsa->p = rsa->q;
rsa->q = tmp;
}
/* calculate n */
if (!BN_mul(rsa->n, rsa->p, rsa->q, ctx))
goto err;
/* calculate d */
if (!BN_sub(r1, rsa->p, BN_value_one()))
goto err; /* p-1 */
if (!BN_sub(r2, rsa->q, BN_value_one()))
goto err; /* q-1 */
if (!BN_mul(r0, r1, r2, ctx))
goto err; /* (p-1)(q-1) */
{
BIGNUM *pr0 = BN_new();
if (pr0 == NULL)
goto err;
BN_with_flags(pr0, r0, BN_FLG_CONSTTIME);
if (!BN_mod_inverse(rsa->d, rsa->e, pr0, ctx)) {
BN_free(pr0);
goto err; /* d */
}
/* We MUST free pr0 before any further use of r0 */
BN_free(pr0);
}
{
BIGNUM *d = BN_new();
if (d == NULL)
goto err;
BN_with_flags(d, rsa->d, BN_FLG_CONSTTIME);
if ( /* calculate d mod (p-1) */
!BN_mod(rsa->dmp1, d, r1, ctx)
/* calculate d mod (q-1) */
|| !BN_mod(rsa->dmq1, d, r2, ctx)) {
BN_free(d);
goto err;
}
/* We MUST free d before any further use of rsa->d */
BN_free(d);
}
{
BIGNUM *p = BN_new();
if (p == NULL)
goto err;
BN_with_flags(p, rsa->p, BN_FLG_CONSTTIME);
/* calculate inverse of q mod p */
if (!BN_mod_inverse(rsa->iqmp, rsa->q, p, ctx)) {
BN_free(p);
goto err;
}
/* We MUST free p before any further use of rsa->p */
BN_free(p);
}
ok = 1;
err:
if (ok == -1) {
RSAerr(RSA_F_RSA_BUILTIN_KEYGEN, ERR_LIB_BN);
ok = 0;
}
if (ctx != NULL)
BN_CTX_end(ctx);
BN_CTX_free(ctx);
return ok;
}
Vulnerability Type:
CWE ID: CWE-327
Summary: The OpenSSL RSA Key generation algorithm has been shown to be vulnerable to a cache timing side channel attack. An attacker with sufficient access to mount cache timing attacks during the RSA key generation process could recover the private key. Fixed in OpenSSL 1.1.0i-dev (Affected 1.1.0-1.1.0h). Fixed in OpenSSL 1.0.2p-dev (Affected 1.0.2b-1.0.2o).
Commit Message: | Medium | 165,327 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void PasswordAutofillManager::OnShowPasswordSuggestions(
int key,
base::i18n::TextDirection text_direction,
const base::string16& typed_username,
int options,
const gfx::RectF& bounds) {
std::vector<autofill::Suggestion> suggestions;
LoginToPasswordInfoMap::const_iterator fill_data_it =
login_to_password_info_.find(key);
if (fill_data_it == login_to_password_info_.end()) {
NOTREACHED();
return;
}
GetSuggestions(fill_data_it->second, typed_username, &suggestions,
(options & autofill::SHOW_ALL) != 0,
(options & autofill::IS_PASSWORD_FIELD) != 0);
form_data_key_ = key;
if (suggestions.empty()) {
autofill_client_->HideAutofillPopup();
return;
}
if (options & autofill::IS_PASSWORD_FIELD) {
autofill::Suggestion password_field_suggestions(l10n_util::GetStringUTF16(
IDS_AUTOFILL_PASSWORD_FIELD_SUGGESTIONS_TITLE));
password_field_suggestions.frontend_id = autofill::POPUP_ITEM_ID_TITLE;
suggestions.insert(suggestions.begin(), password_field_suggestions);
}
GURL origin = (fill_data_it->second).origin;
bool is_context_secure = autofill_client_->IsContextSecure() &&
(!origin.is_valid() || !origin.SchemeIs("http"));
if (!is_context_secure && security_state::IsHttpWarningInFormEnabled()) {
std::string icon_str;
if (origin.is_valid() && origin.SchemeIs("http")) {
icon_str = "httpWarning";
} else {
icon_str = "httpsInvalid";
}
autofill::Suggestion http_warning_suggestion(
l10n_util::GetStringUTF8(IDS_AUTOFILL_LOGIN_HTTP_WARNING_MESSAGE),
l10n_util::GetStringUTF8(IDS_AUTOFILL_HTTP_WARNING_LEARN_MORE),
icon_str, autofill::POPUP_ITEM_ID_HTTP_NOT_SECURE_WARNING_MESSAGE);
#if !defined(OS_ANDROID)
suggestions.insert(suggestions.begin(), autofill::Suggestion());
suggestions.front().frontend_id = autofill::POPUP_ITEM_ID_SEPARATOR;
#endif
suggestions.insert(suggestions.begin(), http_warning_suggestion);
if (!did_show_form_not_secure_warning_) {
did_show_form_not_secure_warning_ = true;
metrics_util::LogShowedFormNotSecureWarningOnCurrentNavigation();
}
}
if (ShouldShowManualFallbackForPreLollipop(
autofill_client_->GetSyncService())) {
if (base::FeatureList::IsEnabled(
password_manager::features::kEnableManualFallbacksFilling) &&
(options & autofill::IS_PASSWORD_FIELD) && password_client_ &&
password_client_->IsFillingFallbackEnabledForCurrentPage()) {
AddSimpleSuggestionWithSeparatorOnTop(
IDS_AUTOFILL_SHOW_ALL_SAVED_FALLBACK,
autofill::POPUP_ITEM_ID_ALL_SAVED_PASSWORDS_ENTRY, &suggestions);
show_all_saved_passwords_shown_context_ =
metrics_util::SHOW_ALL_SAVED_PASSWORDS_CONTEXT_PASSWORD;
metrics_util::LogContextOfShowAllSavedPasswordsShown(
show_all_saved_passwords_shown_context_);
}
if (base::FeatureList::IsEnabled(
password_manager::features::kEnableManualFallbacksGeneration) &&
password_manager_util::GetPasswordSyncState(
autofill_client_->GetSyncService()) == SYNCING_NORMAL_ENCRYPTION) {
AddSimpleSuggestionWithSeparatorOnTop(
IDS_AUTOFILL_GENERATE_PASSWORD_FALLBACK,
autofill::POPUP_ITEM_ID_GENERATE_PASSWORD_ENTRY, &suggestions);
}
}
autofill_client_->ShowAutofillPopup(bounds,
text_direction,
suggestions,
weak_ptr_factory_.GetWeakPtr());
}
Vulnerability Type: Bypass
CWE ID: CWE-264
Summary: The provisional-load commit implementation in WebKit/Source/bindings/core/v8/WindowProxy.cpp in Google Chrome before 47.0.2526.73 allows remote attackers to bypass the Same Origin Policy by leveraging a delay in window proxy clearing.
Commit Message: Fixing names of password_manager kEnableManualFallbacksFilling feature.
Fixing names of password_manager kEnableManualFallbacksFilling feature
as per the naming convention.
Bug: 785953
Change-Id: I4a4baa1649fe9f02c3783a5e4c40bc75e717cc03
Reviewed-on: https://chromium-review.googlesource.com/900566
Reviewed-by: Vaclav Brozek <[email protected]>
Commit-Queue: NIKHIL SAHNI <[email protected]>
Cr-Commit-Position: refs/heads/master@{#534923} | High | 171,747 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void Chapters::Atom::Init()
{
m_string_uid = NULL;
m_uid = 0;
m_start_timecode = -1;
m_stop_timecode = -1;
m_displays = NULL;
m_displays_size = 0;
m_displays_count = 0;
}
Vulnerability Type: DoS Exec Code Overflow Mem. Corr.
CWE ID: CWE-119
Summary: libvpx in mediaserver in Android 4.x before 4.4.4, 5.x before 5.1.1 LMY49H, and 6.0 before 2016-03-01 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted media file, related to libwebm/mkvparser.cpp and other files, aka internal bug 23452792.
Commit Message: libwebm: Pull from upstream
Rolling mkvparser from upstream. Primarily for fixing a bug on parsing
failures with certain Opus WebM files.
Upstream commit hash of this pull: 574045edd4ecbeb802ee3f1d214b5510269852ae
The diff is so huge because there were some style clean ups upstream.
But it was ensured that there were no breaking changes when the style
clean ups was done upstream.
Change-Id: Ib6e907175484b4b0ae1b55ab39522ea3188ad039 | High | 174,387 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: PepperMediaDeviceManager* PepperMediaDeviceManager::GetForRenderFrame(
RenderFrame* render_frame) {
PepperMediaDeviceManager* handler =
PepperMediaDeviceManager::Get(render_frame);
if (!handler)
handler = new PepperMediaDeviceManager(render_frame);
return handler;
}
Vulnerability Type: DoS
CWE ID: CWE-399
Summary: Use-after-free vulnerability in the Pepper plugins in Google Chrome before 39.0.2171.65 allows remote attackers to cause a denial of service or possibly have unspecified other impact via crafted Flash content that triggers an attempted PepperMediaDeviceManager access outside of the object's lifetime.
Commit Message: Pepper: Access PepperMediaDeviceManager through a WeakPtr
Its lifetime is scoped to the RenderFrame, and it might go away before the
hosts that refer to it.
BUG=423030
Review URL: https://codereview.chromium.org/653243003
Cr-Commit-Position: refs/heads/master@{#299897} | High | 171,608 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: bool IDNSpoofChecker::SafeToDisplayAsUnicode(base::StringPiece16 label,
bool is_tld_ascii) {
UErrorCode status = U_ZERO_ERROR;
int32_t result =
uspoof_check(checker_, label.data(),
base::checked_cast<int32_t>(label.size()), nullptr, &status);
if (U_FAILURE(status) || (result & USPOOF_ALL_CHECKS))
return false;
icu::UnicodeString label_string(FALSE, label.data(),
base::checked_cast<int32_t>(label.size()));
if (deviation_characters_.containsSome(label_string))
return false;
result &= USPOOF_RESTRICTION_LEVEL_MASK;
if (result == USPOOF_ASCII)
return true;
if (result == USPOOF_SINGLE_SCRIPT_RESTRICTIVE &&
kana_letters_exceptions_.containsNone(label_string) &&
combining_diacritics_exceptions_.containsNone(label_string)) {
return !is_tld_ascii || !IsMadeOfLatinAlikeCyrillic(label_string);
}
if (non_ascii_latin_letters_.containsSome(label_string) &&
!lgc_letters_n_ascii_.containsAll(label_string))
return false;
if (!tls_index.initialized())
tls_index.Initialize(&OnThreadTermination);
icu::RegexMatcher* dangerous_pattern =
reinterpret_cast<icu::RegexMatcher*>(tls_index.Get());
if (!dangerous_pattern) {
dangerous_pattern = new icu::RegexMatcher(
icu::UnicodeString(
R"([^\p{scx=kana}\p{scx=hira}\p{scx=hani}])"
R"([\u30ce\u30f3\u30bd\u30be])"
R"([^\p{scx=kana}\p{scx=hira}\p{scx=hani}]|)"
R"([^\p{scx=kana}\p{scx=hira}]\u30fc|^\u30fc|)"
R"([^\p{scx=kana}][\u30fd\u30fe]|^[\u30fd\u30fe]|)"
R"(^[\p{scx=kana}]+[\u3078-\u307a][\p{scx=kana}]+$|)"
R"(^[\p{scx=hira}]+[\u30d8-\u30da][\p{scx=hira}]+$|)"
R"([a-z]\u30fb|\u30fb[a-z]|)"
R"([^\p{scx=latn}\p{scx=grek}\p{scx=cyrl}][\u0300-\u0339]|)"
R"([ijl\u0131]\u0307)",
-1, US_INV),
0, status);
tls_index.Set(dangerous_pattern);
}
dangerous_pattern->reset(label_string);
return !dangerous_pattern->find();
}
Vulnerability Type:
CWE ID: CWE-20
Summary: Incorrect security UI in Omnibox in Google Chrome prior to 64.0.3282.119 allowed a remote attacker to spoof the contents of the Omnibox (URL bar) via a crafted HTML page.
Commit Message: Block dotless-i / j + a combining mark
U+0131 (doltess i) and U+0237 (dotless j) are blocked from being
followed by a combining mark in U+0300 block.
Bug: 774842
Test: See the bug
Change-Id: I92aac0e97233184864d060fd0f137a90b042c679
Reviewed-on: https://chromium-review.googlesource.com/767888
Commit-Queue: Jungshik Shin <[email protected]>
Reviewed-by: Peter Kasting <[email protected]>
Cr-Commit-Position: refs/heads/master@{#517605} | Medium | 172,692 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void AppControllerImpl::GetArcAndroidId(
mojom::AppController::GetArcAndroidIdCallback callback) {
arc::GetAndroidId(base::BindOnce(
[](mojom::AppController::GetArcAndroidIdCallback callback, bool success,
int64_t android_id) {
std::move(callback).Run(success, base::NumberToString(android_id));
},
std::move(callback)));
}
Vulnerability Type:
CWE ID: CWE-416
Summary: A heap use after free in PDFium in Google Chrome prior to 54.0.2840.59 for Windows, Mac, and Linux; 54.0.2840.85 for Android allows a remote attacker to potentially exploit heap corruption via crafted PDF files.
Commit Message: Refactor the AppController implementation into a KeyedService.
This is necessary to guarantee that the AppController will not outlive
the AppServiceProxy, which could happen before during Profile destruction.
Bug: 945427
Change-Id: I9e2089799e38d5a70a4a9aa66df5319113e7809e
Reviewed-on: https://chromium-review.googlesource.com/c/chromium/src/+/1542336
Reviewed-by: Michael Giuffrida <[email protected]>
Commit-Queue: Lucas Tenório <[email protected]>
Cr-Commit-Position: refs/heads/master@{#645122} | Medium | 172,083 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void SharedWorkerDevToolsAgentHost::AttachSession(DevToolsSession* session) {
session->AddHandler(std::make_unique<protocol::InspectorHandler>());
session->AddHandler(std::make_unique<protocol::NetworkHandler>(GetId()));
session->AddHandler(std::make_unique<protocol::SchemaHandler>());
session->SetRenderer(worker_host_ ? worker_host_->process_id() : -1, nullptr);
if (state_ == WORKER_READY)
session->AttachToAgent(EnsureAgent());
}
Vulnerability Type: Exec Code
CWE ID: CWE-20
Summary: Allowing the chrome.debugger API to attach to Web UI pages in DevTools in Google Chrome prior to 67.0.3396.62 allowed an attacker who convinced a user to install a malicious extension to execute arbitrary code via a crafted Chrome Extension.
Commit Message: [DevTools] Do not allow chrome.debugger to attach to web ui pages
If the page navigates to web ui, we force detach the debugger extension.
[email protected]
Bug: 798222
Change-Id: Idb46c2f59e839388397a8dfa6ce2e2a897698df3
Reviewed-on: https://chromium-review.googlesource.com/935961
Commit-Queue: Dmitry Gozman <[email protected]>
Reviewed-by: Devlin <[email protected]>
Reviewed-by: Pavel Feldman <[email protected]>
Reviewed-by: Nasko Oskov <[email protected]>
Cr-Commit-Position: refs/heads/master@{#540916} | High | 173,252 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: int snd_card_new(struct device *parent, int idx, const char *xid,
struct module *module, int extra_size,
struct snd_card **card_ret)
{
struct snd_card *card;
int err;
if (snd_BUG_ON(!card_ret))
return -EINVAL;
*card_ret = NULL;
if (extra_size < 0)
extra_size = 0;
card = kzalloc(sizeof(*card) + extra_size, GFP_KERNEL);
if (!card)
return -ENOMEM;
if (extra_size > 0)
card->private_data = (char *)card + sizeof(struct snd_card);
if (xid)
strlcpy(card->id, xid, sizeof(card->id));
err = 0;
mutex_lock(&snd_card_mutex);
if (idx < 0) /* first check the matching module-name slot */
idx = get_slot_from_bitmask(idx, module_slot_match, module);
if (idx < 0) /* if not matched, assign an empty slot */
idx = get_slot_from_bitmask(idx, check_empty_slot, module);
if (idx < 0)
err = -ENODEV;
else if (idx < snd_ecards_limit) {
if (test_bit(idx, snd_cards_lock))
err = -EBUSY; /* invalid */
} else if (idx >= SNDRV_CARDS)
err = -ENODEV;
if (err < 0) {
mutex_unlock(&snd_card_mutex);
dev_err(parent, "cannot find the slot for index %d (range 0-%i), error: %d\n",
idx, snd_ecards_limit - 1, err);
kfree(card);
return err;
}
set_bit(idx, snd_cards_lock); /* lock it */
if (idx >= snd_ecards_limit)
snd_ecards_limit = idx + 1; /* increase the limit */
mutex_unlock(&snd_card_mutex);
card->dev = parent;
card->number = idx;
card->module = module;
INIT_LIST_HEAD(&card->devices);
init_rwsem(&card->controls_rwsem);
rwlock_init(&card->ctl_files_rwlock);
INIT_LIST_HEAD(&card->controls);
INIT_LIST_HEAD(&card->ctl_files);
spin_lock_init(&card->files_lock);
INIT_LIST_HEAD(&card->files_list);
#ifdef CONFIG_PM
mutex_init(&card->power_lock);
init_waitqueue_head(&card->power_sleep);
#endif
device_initialize(&card->card_dev);
card->card_dev.parent = parent;
card->card_dev.class = sound_class;
card->card_dev.release = release_card_device;
card->card_dev.groups = card_dev_attr_groups;
err = kobject_set_name(&card->card_dev.kobj, "card%d", idx);
if (err < 0)
goto __error;
/* the control interface cannot be accessed from the user space until */
/* snd_cards_bitmask and snd_cards are set with snd_card_register */
err = snd_ctl_create(card);
if (err < 0) {
dev_err(parent, "unable to register control minors\n");
goto __error;
}
err = snd_info_card_create(card);
if (err < 0) {
dev_err(parent, "unable to create card info\n");
goto __error_ctl;
}
*card_ret = card;
return 0;
__error_ctl:
snd_device_free_all(card);
__error:
put_device(&card->card_dev);
return err;
}
Vulnerability Type: +Info
CWE ID: CWE-362
Summary: Race condition in the tlv handler functionality in the snd_ctl_elem_user_tlv function in sound/core/control.c in the ALSA control implementation in the Linux kernel before 3.15.2 allows local users to obtain sensitive information from kernel memory by leveraging /dev/snd/controlCX access.
Commit Message: ALSA: control: Protect user controls against concurrent access
The user-control put and get handlers as well as the tlv do not protect against
concurrent access from multiple threads. Since the state of the control is not
updated atomically it is possible that either two write operations or a write
and a read operation race against each other. Both can lead to arbitrary memory
disclosure. This patch introduces a new lock that protects user-controls from
concurrent access. Since applications typically access controls sequentially
than in parallel a single lock per card should be fine.
Signed-off-by: Lars-Peter Clausen <[email protected]>
Acked-by: Jaroslav Kysela <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]> | Medium | 166,300 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void hugetlb_put_quota(struct address_space *mapping, long delta)
{
struct hugetlbfs_sb_info *sbinfo = HUGETLBFS_SB(mapping->host->i_sb);
if (sbinfo->free_blocks > -1) {
spin_lock(&sbinfo->stat_lock);
sbinfo->free_blocks += delta;
spin_unlock(&sbinfo->stat_lock);
}
}
Vulnerability Type: DoS +Priv
CWE ID: CWE-399
Summary: Use-after-free vulnerability in the Linux kernel before 3.3.6, when huge pages are enabled, allows local users to cause a denial of service (system crash) or possibly gain privileges by interacting with a hugetlbfs filesystem, as demonstrated by a umount operation that triggers improper handling of quota data.
Commit Message: hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <[email protected]>
Signed-off-by: David Gibson <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Hillf Danton <[email protected]>
Cc: Paul Mackerras <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]> | Medium | 165,604 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: const Chapters::Edition* Chapters::GetEdition(int idx) const
{
if (idx < 0)
return NULL;
if (idx >= m_editions_count)
return NULL;
return m_editions + idx;
}
Vulnerability Type: DoS Exec Code Overflow Mem. Corr.
CWE ID: CWE-119
Summary: libvpx in mediaserver in Android 4.x before 4.4.4, 5.x before 5.1.1 LMY49H, and 6.0 before 2016-03-01 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted media file, related to libwebm/mkvparser.cpp and other files, aka internal bug 23452792.
Commit Message: libwebm: Pull from upstream
Rolling mkvparser from upstream. Primarily for fixing a bug on parsing
failures with certain Opus WebM files.
Upstream commit hash of this pull: 574045edd4ecbeb802ee3f1d214b5510269852ae
The diff is so huge because there were some style clean ups upstream.
But it was ensured that there were no breaking changes when the style
clean ups was done upstream.
Change-Id: Ib6e907175484b4b0ae1b55ab39522ea3188ad039 | High | 174,310 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: bool VaapiVideoDecodeAccelerator::VaapiH264Accelerator::SubmitDecode(
const scoped_refptr<H264Picture>& pic) {
VLOGF(4) << "Decoding POC " << pic->pic_order_cnt;
scoped_refptr<VaapiDecodeSurface> dec_surface =
H264PictureToVaapiDecodeSurface(pic);
return vaapi_dec_->DecodeSurface(dec_surface);
}
Vulnerability Type:
CWE ID: CWE-362
Summary: A race in the handling of SharedArrayBuffers in WebAssembly in Google Chrome prior to 65.0.3325.146 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.
Commit Message: vaapi vda: Delete owned objects on worker thread in Cleanup()
This CL adds a SEQUENCE_CHECKER to Vaapi*Accelerator classes, and
posts the destruction of those objects to the appropriate thread on
Cleanup().
Also makes {H264,VP8,VP9}Picture RefCountedThreadSafe, see miu@
comment in
https://chromium-review.googlesource.com/c/chromium/src/+/794091#message-a64bed985cfaf8a19499a517bb110a7ce581dc0f
TEST=play back VP9/VP8/H264 w/ simplechrome on soraka, Release build
unstripped, let video play for a few seconds then navigate back; no
crashes. Unittests as before:
video_decode_accelerator_unittest --test_video_data=test-25fps.vp9:320:240:250:250:35:150:12
video_decode_accelerator_unittest --test_video_data=test-25fps.vp8:320:240:250:250:35:150:11
video_decode_accelerator_unittest --test_video_data=test-25fps.h264:320:240:250:258:35:150:1
Bug: 789160
Cq-Include-Trybots: master.tryserver.chromium.android:android_optional_gpu_tests_rel;master.tryserver.chromium.linux:linux_optional_gpu_tests_rel;master.tryserver.chromium.mac:mac_optional_gpu_tests_rel;master.tryserver.chromium.win:win_optional_gpu_tests_rel
Change-Id: I7d96aaf89c92bf46f00c8b8b36798e057a842ed2
Reviewed-on: https://chromium-review.googlesource.com/794091
Reviewed-by: Pawel Osciak <[email protected]>
Commit-Queue: Miguel Casas <[email protected]>
Cr-Commit-Position: refs/heads/master@{#523372} | Medium | 172,808 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: Response StorageHandler::UntrackCacheStorageForOrigin(
const std::string& origin) {
if (!process_)
return Response::InternalError();
GURL origin_url(origin);
if (!origin_url.is_valid())
return Response::InvalidParams(origin + " is not a valid URL");
BrowserThread::PostTask(
BrowserThread::IO, FROM_HERE,
base::BindOnce(&CacheStorageObserver::UntrackOriginOnIOThread,
base::Unretained(GetCacheStorageObserver()),
url::Origin::Create(origin_url)));
return Response::OK();
}
Vulnerability Type: Exec Code
CWE ID: CWE-20
Summary: An object lifetime issue in the developer tools network handler in Google Chrome prior to 66.0.3359.117 allowed a local attacker to execute arbitrary code via a crafted HTML page.
Commit Message: DevTools: speculative fix for crash in NetworkHandler::Disable
This keeps BrowserContext* and StoragePartition* instead of
RenderProcessHost* in an attemp to resolve UAF of RenderProcessHost
upon closure of DevTools front-end.
Bug: 801117, 783067, 780694
Change-Id: I6c2cca60cc0c29f0949d189cf918769059f80c1b
Reviewed-on: https://chromium-review.googlesource.com/876657
Commit-Queue: Andrey Kosyakov <[email protected]>
Reviewed-by: Dmitry Gozman <[email protected]>
Cr-Commit-Position: refs/heads/master@{#531157} | Medium | 172,778 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: pipe_read(struct kiocb *iocb, const struct iovec *_iov,
unsigned long nr_segs, loff_t pos)
{
struct file *filp = iocb->ki_filp;
struct pipe_inode_info *pipe = filp->private_data;
int do_wakeup;
ssize_t ret;
struct iovec *iov = (struct iovec *)_iov;
size_t total_len;
total_len = iov_length(iov, nr_segs);
/* Null read succeeds. */
if (unlikely(total_len == 0))
return 0;
do_wakeup = 0;
ret = 0;
__pipe_lock(pipe);
for (;;) {
int bufs = pipe->nrbufs;
if (bufs) {
int curbuf = pipe->curbuf;
struct pipe_buffer *buf = pipe->bufs + curbuf;
const struct pipe_buf_operations *ops = buf->ops;
void *addr;
size_t chars = buf->len;
int error, atomic;
if (chars > total_len)
chars = total_len;
error = ops->confirm(pipe, buf);
if (error) {
if (!ret)
ret = error;
break;
}
atomic = !iov_fault_in_pages_write(iov, chars);
redo:
if (atomic)
addr = kmap_atomic(buf->page);
else
addr = kmap(buf->page);
error = pipe_iov_copy_to_user(iov, addr + buf->offset, chars, atomic);
if (atomic)
kunmap_atomic(addr);
else
kunmap(buf->page);
if (unlikely(error)) {
/*
* Just retry with the slow path if we failed.
*/
if (atomic) {
atomic = 0;
goto redo;
}
if (!ret)
ret = error;
break;
}
ret += chars;
buf->offset += chars;
buf->len -= chars;
/* Was it a packet buffer? Clean up and exit */
if (buf->flags & PIPE_BUF_FLAG_PACKET) {
total_len = chars;
buf->len = 0;
}
if (!buf->len) {
buf->ops = NULL;
ops->release(pipe, buf);
curbuf = (curbuf + 1) & (pipe->buffers - 1);
pipe->curbuf = curbuf;
pipe->nrbufs = --bufs;
do_wakeup = 1;
}
total_len -= chars;
if (!total_len)
break; /* common path: read succeeded */
}
if (bufs) /* More to do? */
continue;
if (!pipe->writers)
break;
if (!pipe->waiting_writers) {
/* syscall merging: Usually we must not sleep
* if O_NONBLOCK is set, or if we got some data.
* But if a writer sleeps in kernel space, then
* we can wait for that data without violating POSIX.
*/
if (ret)
break;
if (filp->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
break;
}
}
if (signal_pending(current)) {
if (!ret)
ret = -ERESTARTSYS;
break;
}
if (do_wakeup) {
wake_up_interruptible_sync_poll(&pipe->wait, POLLOUT | POLLWRNORM);
kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
}
pipe_wait(pipe);
}
__pipe_unlock(pipe);
/* Signal writers asynchronously that there is more room. */
if (do_wakeup) {
wake_up_interruptible_sync_poll(&pipe->wait, POLLOUT | POLLWRNORM);
kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
}
if (ret > 0)
file_accessed(filp);
return ret;
}
Vulnerability Type: DoS +Priv
CWE ID: CWE-17
Summary: The (1) pipe_read and (2) pipe_write implementations in fs/pipe.c in the Linux kernel before 3.16 do not properly consider the side effects of failed __copy_to_user_inatomic and __copy_from_user_inatomic calls, which allows local users to cause a denial of service (system crash) or possibly gain privileges via a crafted application, aka an *I/O vector array overrun.*
Commit Message: switch pipe_read() to copy_page_to_iter()
Signed-off-by: Al Viro <[email protected]> | High | 169,929 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void StoreExistingGroupExistingCache() {
MakeCacheAndGroup(kManifestUrl, 1, 1, true);
EXPECT_EQ(kDefaultEntrySize, storage()->usage_map_[kOrigin]);
base::Time now = base::Time::Now();
cache_->AddEntry(kEntryUrl, AppCacheEntry(AppCacheEntry::MASTER, 1, 100));
cache_->set_update_time(now);
PushNextTask(base::BindOnce(
&AppCacheStorageImplTest::Verify_StoreExistingGroupExistingCache,
base::Unretained(this), now));
EXPECT_EQ(cache_.get(), group_->newest_complete_cache());
storage()->StoreGroupAndNewestCache(group_.get(), cache_.get(), delegate());
EXPECT_FALSE(delegate()->stored_group_success_);
}
Vulnerability Type: +Info
CWE ID: CWE-200
Summary: Resource size information leakage in Blink in Google Chrome prior to 75.0.3770.80 allowed a remote attacker to leak cross-origin data via a crafted HTML page.
Commit Message: Reland "AppCache: Add padding to cross-origin responses."
This is a reland of 85b389caa7d725cdd31f59e9a2b79ff54804b7b7
Initialized CacheRecord::padding_size to 0.
Original change's description:
> AppCache: Add padding to cross-origin responses.
>
> Bug: 918293
> Change-Id: I4f16640f06feac009d6bbbb624951da6d2669f6c
> Reviewed-on: https://chromium-review.googlesource.com/c/chromium/src/+/1488059
> Commit-Queue: Staphany Park <[email protected]>
> Reviewed-by: Victor Costan <[email protected]>
> Reviewed-by: Marijn Kruisselbrink <[email protected]>
> Cr-Commit-Position: refs/heads/master@{#644624}
Bug: 918293
Change-Id: Ie1d3f99c7e8a854d33255a4d66243da2ce16441c
Reviewed-on: https://chromium-review.googlesource.com/c/chromium/src/+/1539906
Reviewed-by: Victor Costan <[email protected]>
Commit-Queue: Staphany Park <[email protected]>
Cr-Commit-Position: refs/heads/master@{#644719} | Medium | 172,990 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: long do_shmat(int shmid, char __user *shmaddr, int shmflg, ulong *raddr,
unsigned long shmlba)
{
struct shmid_kernel *shp;
unsigned long addr;
unsigned long size;
struct file * file;
int err;
unsigned long flags;
unsigned long prot;
int acc_mode;
struct ipc_namespace *ns;
struct shm_file_data *sfd;
struct path path;
fmode_t f_mode;
unsigned long populate = 0;
err = -EINVAL;
if (shmid < 0)
goto out;
else if ((addr = (ulong)shmaddr)) {
if (addr & (shmlba - 1)) {
if (shmflg & SHM_RND)
addr &= ~(shmlba - 1); /* round down */
else
#ifndef __ARCH_FORCE_SHMLBA
if (addr & ~PAGE_MASK)
#endif
goto out;
}
flags = MAP_SHARED | MAP_FIXED;
} else {
if ((shmflg & SHM_REMAP))
goto out;
flags = MAP_SHARED;
}
if (shmflg & SHM_RDONLY) {
prot = PROT_READ;
acc_mode = S_IRUGO;
f_mode = FMODE_READ;
} else {
prot = PROT_READ | PROT_WRITE;
acc_mode = S_IRUGO | S_IWUGO;
f_mode = FMODE_READ | FMODE_WRITE;
}
if (shmflg & SHM_EXEC) {
prot |= PROT_EXEC;
acc_mode |= S_IXUGO;
}
/*
* We cannot rely on the fs check since SYSV IPC does have an
* additional creator id...
*/
ns = current->nsproxy->ipc_ns;
rcu_read_lock();
shp = shm_obtain_object_check(ns, shmid);
if (IS_ERR(shp)) {
err = PTR_ERR(shp);
goto out_unlock;
}
err = -EACCES;
if (ipcperms(ns, &shp->shm_perm, acc_mode))
goto out_unlock;
err = security_shm_shmat(shp, shmaddr, shmflg);
if (err)
goto out_unlock;
ipc_lock_object(&shp->shm_perm);
path = shp->shm_file->f_path;
path_get(&path);
shp->shm_nattch++;
size = i_size_read(path.dentry->d_inode);
ipc_unlock_object(&shp->shm_perm);
rcu_read_unlock();
err = -ENOMEM;
sfd = kzalloc(sizeof(*sfd), GFP_KERNEL);
if (!sfd) {
path_put(&path);
goto out_nattch;
}
file = alloc_file(&path, f_mode,
is_file_hugepages(shp->shm_file) ?
&shm_file_operations_huge :
&shm_file_operations);
err = PTR_ERR(file);
if (IS_ERR(file)) {
kfree(sfd);
path_put(&path);
goto out_nattch;
}
file->private_data = sfd;
file->f_mapping = shp->shm_file->f_mapping;
sfd->id = shp->shm_perm.id;
sfd->ns = get_ipc_ns(ns);
sfd->file = shp->shm_file;
sfd->vm_ops = NULL;
err = security_mmap_file(file, prot, flags);
if (err)
goto out_fput;
down_write(¤t->mm->mmap_sem);
if (addr && !(shmflg & SHM_REMAP)) {
err = -EINVAL;
if (find_vma_intersection(current->mm, addr, addr + size))
goto invalid;
/*
* If shm segment goes below stack, make sure there is some
* space left for the stack to grow (at least 4 pages).
*/
if (addr < current->mm->start_stack &&
addr > current->mm->start_stack - size - PAGE_SIZE * 5)
goto invalid;
}
addr = do_mmap_pgoff(file, addr, size, prot, flags, 0, &populate);
*raddr = addr;
err = 0;
if (IS_ERR_VALUE(addr))
err = (long)addr;
invalid:
up_write(¤t->mm->mmap_sem);
if (populate)
mm_populate(addr, populate);
out_fput:
fput(file);
out_nattch:
down_write(&shm_ids(ns).rwsem);
shp = shm_lock(ns, shmid);
BUG_ON(IS_ERR(shp));
shp->shm_nattch--;
if (shm_may_destroy(ns, shp))
shm_destroy(ns, shp);
else
shm_unlock(shp);
up_write(&shm_ids(ns).rwsem);
return err;
out_unlock:
rcu_read_unlock();
out:
return err;
}
Vulnerability Type: DoS
CWE ID: CWE-362
Summary: Multiple race conditions in ipc/shm.c in the Linux kernel before 3.12.2 allow local users to cause a denial of service (use-after-free and system crash) or possibly have unspecified other impact via a crafted application that uses shmctl IPC_RMID operations in conjunction with other shm system calls.
Commit Message: ipc,shm: fix shm_file deletion races
When IPC_RMID races with other shm operations there's potential for
use-after-free of the shm object's associated file (shm_file).
Here's the race before this patch:
TASK 1 TASK 2
------ ------
shm_rmid()
ipc_lock_object()
shmctl()
shp = shm_obtain_object_check()
shm_destroy()
shum_unlock()
fput(shp->shm_file)
ipc_lock_object()
shmem_lock(shp->shm_file)
<OOPS>
The oops is caused because shm_destroy() calls fput() after dropping the
ipc_lock. fput() clears the file's f_inode, f_path.dentry, and
f_path.mnt, which causes various NULL pointer references in task 2. I
reliably see the oops in task 2 if with shmlock, shmu
This patch fixes the races by:
1) set shm_file=NULL in shm_destroy() while holding ipc_object_lock().
2) modify at risk operations to check shm_file while holding
ipc_object_lock().
Example workloads, which each trigger oops...
Workload 1:
while true; do
id=$(shmget 1 4096)
shm_rmid $id &
shmlock $id &
wait
done
The oops stack shows accessing NULL f_inode due to racing fput:
_raw_spin_lock
shmem_lock
SyS_shmctl
Workload 2:
while true; do
id=$(shmget 1 4096)
shmat $id 4096 &
shm_rmid $id &
wait
done
The oops stack is similar to workload 1 due to NULL f_inode:
touch_atime
shmem_mmap
shm_mmap
mmap_region
do_mmap_pgoff
do_shmat
SyS_shmat
Workload 3:
while true; do
id=$(shmget 1 4096)
shmlock $id
shm_rmid $id &
shmunlock $id &
wait
done
The oops stack shows second fput tripping on an NULL f_inode. The
first fput() completed via from shm_destroy(), but a racing thread did
a get_file() and queued this fput():
locks_remove_flock
__fput
____fput
task_work_run
do_notify_resume
int_signal
Fixes: c2c737a0461e ("ipc,shm: shorten critical region for shmat")
Fixes: 2caacaa82a51 ("ipc,shm: shorten critical region for shmctl")
Signed-off-by: Greg Thelen <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Manfred Spraul <[email protected]>
Cc: <[email protected]> # 3.10.17+ 3.11.6+
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]> | Medium | 165,911 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: auth_select_file(struct sc_card *card, const struct sc_path *in_path,
struct sc_file **file_out)
{
struct sc_path path;
struct sc_file *tmp_file = NULL;
size_t offs, ii;
int rv;
LOG_FUNC_CALLED(card->ctx);
assert(card != NULL && in_path != NULL);
memcpy(&path, in_path, sizeof(struct sc_path));
sc_log(card->ctx, "in_path; type=%d, path=%s, out %p",
in_path->type, sc_print_path(in_path), file_out);
sc_log(card->ctx, "current path; type=%d, path=%s",
auth_current_df->path.type, sc_print_path(&auth_current_df->path));
if (auth_current_ef)
sc_log(card->ctx, "current file; type=%d, path=%s",
auth_current_ef->path.type, sc_print_path(&auth_current_ef->path));
if (path.type == SC_PATH_TYPE_PARENT || path.type == SC_PATH_TYPE_FILE_ID) {
sc_file_free(auth_current_ef);
auth_current_ef = NULL;
rv = iso_ops->select_file(card, &path, &tmp_file);
LOG_TEST_RET(card->ctx, rv, "select file failed");
if (!tmp_file)
return SC_ERROR_OBJECT_NOT_FOUND;
if (path.type == SC_PATH_TYPE_PARENT) {
memcpy(&tmp_file->path, &auth_current_df->path, sizeof(struct sc_path));
if (tmp_file->path.len > 2)
tmp_file->path.len -= 2;
sc_file_free(auth_current_df);
sc_file_dup(&auth_current_df, tmp_file);
}
else {
if (tmp_file->type == SC_FILE_TYPE_DF) {
sc_concatenate_path(&tmp_file->path, &auth_current_df->path, &path);
sc_file_free(auth_current_df);
sc_file_dup(&auth_current_df, tmp_file);
}
else {
sc_file_free(auth_current_ef);
sc_file_dup(&auth_current_ef, tmp_file);
sc_concatenate_path(&auth_current_ef->path, &auth_current_df->path, &path);
}
}
if (file_out)
sc_file_dup(file_out, tmp_file);
sc_file_free(tmp_file);
}
else if (path.type == SC_PATH_TYPE_DF_NAME) {
rv = iso_ops->select_file(card, &path, NULL);
if (rv) {
sc_file_free(auth_current_ef);
auth_current_ef = NULL;
}
LOG_TEST_RET(card->ctx, rv, "select file failed");
}
else {
for (offs = 0; offs < path.len && offs < auth_current_df->path.len; offs += 2)
if (path.value[offs] != auth_current_df->path.value[offs] ||
path.value[offs + 1] != auth_current_df->path.value[offs + 1])
break;
sc_log(card->ctx, "offs %"SC_FORMAT_LEN_SIZE_T"u", offs);
if (offs && offs < auth_current_df->path.len) {
size_t deep = auth_current_df->path.len - offs;
sc_log(card->ctx, "deep %"SC_FORMAT_LEN_SIZE_T"u",
deep);
for (ii=0; ii<deep; ii+=2) {
struct sc_path tmp_path;
memcpy(&tmp_path, &auth_current_df->path, sizeof(struct sc_path));
tmp_path.type = SC_PATH_TYPE_PARENT;
rv = auth_select_file (card, &tmp_path, file_out);
LOG_TEST_RET(card->ctx, rv, "select file failed");
}
}
if (path.len - offs > 0) {
struct sc_path tmp_path;
memset(&tmp_path, 0, sizeof(struct sc_path));
tmp_path.type = SC_PATH_TYPE_FILE_ID;
tmp_path.len = 2;
for (ii=0; ii < path.len - offs; ii+=2) {
memcpy(tmp_path.value, path.value + offs + ii, 2);
rv = auth_select_file(card, &tmp_path, file_out);
LOG_TEST_RET(card->ctx, rv, "select file failed");
}
}
else if (path.len - offs == 0 && file_out) {
if (sc_compare_path(&path, &auth_current_df->path))
sc_file_dup(file_out, auth_current_df);
else if (auth_current_ef)
sc_file_dup(file_out, auth_current_ef);
else
LOG_TEST_RET(card->ctx, SC_ERROR_INTERNAL, "No current EF");
}
}
LOG_FUNC_RETURN(card->ctx, 0);
}
Vulnerability Type:
CWE ID: CWE-125
Summary: Various out of bounds reads when handling responses in OpenSC before 0.19.0-rc1 could be used by attackers able to supply crafted smartcards to potentially crash the opensc library using programs.
Commit Message: fixed out of bounds reads
Thanks to Eric Sesterhenn from X41 D-SEC GmbH
for reporting and suggesting security fixes. | Low | 169,059 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb,
netdev_features_t features)
{
struct sk_buff *segs = ERR_PTR(-EINVAL);
unsigned int mss;
unsigned int unfrag_ip6hlen, unfrag_len;
struct frag_hdr *fptr;
u8 *packet_start, *prevhdr;
u8 nexthdr;
u8 frag_hdr_sz = sizeof(struct frag_hdr);
int offset;
__wsum csum;
int tnl_hlen;
mss = skb_shinfo(skb)->gso_size;
if (unlikely(skb->len <= mss))
goto out;
if (skb_gso_ok(skb, features | NETIF_F_GSO_ROBUST)) {
/* Packet is from an untrusted source, reset gso_segs. */
int type = skb_shinfo(skb)->gso_type;
if (unlikely(type & ~(SKB_GSO_UDP |
SKB_GSO_DODGY |
SKB_GSO_UDP_TUNNEL |
SKB_GSO_GRE |
SKB_GSO_IPIP |
SKB_GSO_SIT |
SKB_GSO_MPLS) ||
!(type & (SKB_GSO_UDP))))
goto out;
skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(skb->len, mss);
segs = NULL;
goto out;
}
if (skb->encapsulation && skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL)
segs = skb_udp_tunnel_segment(skb, features);
else {
/* Do software UFO. Complete and fill in the UDP checksum as HW cannot
* do checksum of UDP packets sent as multiple IP fragments.
*/
offset = skb_checksum_start_offset(skb);
csum = skb_checksum(skb, offset, skb->len - offset, 0);
offset += skb->csum_offset;
*(__sum16 *)(skb->data + offset) = csum_fold(csum);
skb->ip_summed = CHECKSUM_NONE;
/* Check if there is enough headroom to insert fragment header. */
tnl_hlen = skb_tnl_header_len(skb);
if (skb_headroom(skb) < (tnl_hlen + frag_hdr_sz)) {
if (gso_pskb_expand_head(skb, tnl_hlen + frag_hdr_sz))
goto out;
}
/* Find the unfragmentable header and shift it left by frag_hdr_sz
* bytes to insert fragment header.
*/
unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
nexthdr = *prevhdr;
*prevhdr = NEXTHDR_FRAGMENT;
unfrag_len = (skb_network_header(skb) - skb_mac_header(skb)) +
unfrag_ip6hlen + tnl_hlen;
packet_start = (u8 *) skb->head + SKB_GSO_CB(skb)->mac_offset;
memmove(packet_start-frag_hdr_sz, packet_start, unfrag_len);
SKB_GSO_CB(skb)->mac_offset -= frag_hdr_sz;
skb->mac_header -= frag_hdr_sz;
skb->network_header -= frag_hdr_sz;
fptr = (struct frag_hdr *)(skb_network_header(skb) + unfrag_ip6hlen);
fptr->nexthdr = nexthdr;
fptr->reserved = 0;
ipv6_select_ident(fptr, (struct rt6_info *)skb_dst(skb));
/* Fragment the skb. ipv6 header and the remaining fields of the
* fragment header are updated in ipv6_gso_segment()
*/
segs = skb_segment(skb, features);
}
out:
return segs;
}
Vulnerability Type: DoS
CWE ID: CWE-189
Summary: The udp6_ufo_fragment function in net/ipv6/udp_offload.c in the Linux kernel through 3.12, when UDP Fragmentation Offload (UFO) is enabled, does not properly perform a certain size comparison before inserting a fragment header, which allows remote attackers to cause a denial of service (panic) via a large IPv6 UDP packet, as demonstrated by use of the Token Bucket Filter (TBF) queueing discipline.
Commit Message: ipv6: fix headroom calculation in udp6_ufo_fragment
Commit 1e2bd517c108816220f262d7954b697af03b5f9c ("udp6: Fix udp
fragmentation for tunnel traffic.") changed the calculation if
there is enough space to include a fragment header in the skb from a
skb->mac_header dervived one to skb_headroom. Because we already peeled
off the skb to transport_header this is wrong. Change this back to check
if we have enough room before the mac_header.
This fixes a panic Saran Neti reported. He used the tbf scheduler which
skb_gso_segments the skb. The offsets get negative and we panic in memcpy
because the skb was erroneously not expanded at the head.
Reported-by: Saran Neti <[email protected]>
Cc: Pravin B Shelar <[email protected]>
Signed-off-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]> | High | 165,960 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: bool CSSStyleSheet::CanAccessRules() const {
if (enable_rule_access_for_inspector_)
return true;
if (is_inline_stylesheet_)
return true;
KURL base_url = contents_->BaseURL();
if (base_url.IsEmpty())
return true;
Document* document = OwnerDocument();
if (!document)
return true;
if (document->GetSecurityOrigin()->CanReadContent(base_url))
return true;
if (allow_rule_access_from_origin_ &&
document->GetSecurityOrigin()->CanAccess(
allow_rule_access_from_origin_.get())) {
return true;
}
return false;
}
Vulnerability Type: +Info
CWE ID: CWE-200
Summary: Insufficient origin checks for CSS content in Blink in Google Chrome prior to 68.0.3440.75 allowed a remote attacker to leak cross-origin data via a crafted HTML page.
Commit Message: Disallow access to opaque CSS responses.
Bug: 848786
Change-Id: Ie53fbf644afdd76d7c65649a05c939c63d89b4ec
Reviewed-on: https://chromium-review.googlesource.com/1088335
Reviewed-by: Kouhei Ueno <[email protected]>
Commit-Queue: Matt Falkenhagen <[email protected]>
Cr-Commit-Position: refs/heads/master@{#565537} | Medium | 173,153 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
unsigned int vlen, unsigned int flags,
struct compat_timespec __user *timeout)
{
int datagrams;
struct timespec ktspec;
if (flags & MSG_CMSG_COMPAT)
return -EINVAL;
if (COMPAT_USE_64BIT_TIME)
return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
flags | MSG_CMSG_COMPAT,
(struct timespec *) timeout);
if (timeout == NULL)
return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
flags | MSG_CMSG_COMPAT, NULL);
if (get_compat_timespec(&ktspec, timeout))
return -EFAULT;
datagrams = __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
flags | MSG_CMSG_COMPAT, &ktspec);
if (datagrams > 0 && put_compat_timespec(&ktspec, timeout))
datagrams = -EFAULT;
return datagrams;
}
Vulnerability Type: +Priv
CWE ID: CWE-20
Summary: The compat_sys_recvmmsg function in net/compat.c in the Linux kernel before 3.13.2, when CONFIG_X86_X32 is enabled, allows local users to gain privileges via a recvmmsg system call with a crafted timeout pointer parameter.
Commit Message: x86, x32: Correct invalid use of user timespec in the kernel
The x32 case for the recvmsg() timout handling is broken:
asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
unsigned int vlen, unsigned int flags,
struct compat_timespec __user *timeout)
{
int datagrams;
struct timespec ktspec;
if (flags & MSG_CMSG_COMPAT)
return -EINVAL;
if (COMPAT_USE_64BIT_TIME)
return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
flags | MSG_CMSG_COMPAT,
(struct timespec *) timeout);
...
The timeout pointer parameter is provided by userland (hence the __user
annotation) but for x32 syscalls it's simply cast to a kernel pointer
and is passed to __sys_recvmmsg which will eventually directly
dereference it for both reading and writing. Other callers to
__sys_recvmmsg properly copy from userland to the kernel first.
The bug was introduced by commit ee4fa23c4bfc ("compat: Use
COMPAT_USE_64BIT_TIME in net/compat.c") and should affect all kernels
since 3.4 (and perhaps vendor kernels if they backported x32 support
along with this code).
Note that CONFIG_X86_X32_ABI gets enabled at build time and only if
CONFIG_X86_X32 is enabled and ld can build x32 executables.
Other uses of COMPAT_USE_64BIT_TIME seem fine.
This addresses CVE-2014-0038.
Signed-off-by: PaX Team <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Cc: <[email protected]> # v3.4+
Signed-off-by: Linus Torvalds <[email protected]> | Medium | 166,467 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void BaseRenderingContext2D::Reset() {
ValidateStateStack();
UnwindStateStack();
state_stack_.resize(1);
state_stack_.front() = CanvasRenderingContext2DState::Create();
path_.Clear();
if (PaintCanvas* c = ExistingDrawingCanvas()) {
DCHECK_EQ(c->getSaveCount(), 2);
c->restore();
c->save();
DCHECK(c->getTotalMatrix().isIdentity());
#if DCHECK_IS_ON()
SkIRect clip_bounds;
DCHECK(c->getDeviceClipBounds(&clip_bounds));
DCHECK(clip_bounds == c->imageInfo().bounds());
#endif
}
ValidateStateStack();
}
Vulnerability Type: +Info
CWE ID: CWE-200
Summary: Displacement map filters being applied to cross-origin images in Blink SVG rendering in Google Chrome prior to 65.0.3325.146 allowed a remote attacker to leak cross-origin data via a crafted HTML page.
Commit Message: [PE] Distinguish between tainting due to canvas content and filter.
A filter on a canvas can itself lead to origin tainting, for reasons
other than that the canvas contents are tainted. This CL changes
to distinguish these two causes, so that we recompute filters
on content-tainting change.
Bug: 778506
Change-Id: I3cec8ef3b2772f2af78cdd4b290520113092cca6
Reviewed-on: https://chromium-review.googlesource.com/811767
Reviewed-by: Fredrik Söderquist <[email protected]>
Commit-Queue: Chris Harrelson <[email protected]>
Cr-Commit-Position: refs/heads/master@{#522274} | Medium | 172,906 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static Image *ReadPIXImage(const ImageInfo *image_info,ExceptionInfo *exception)
{
Image
*image;
IndexPacket
index;
MagickBooleanType
status;
Quantum
blue,
green,
red;
register IndexPacket
*indexes;
register ssize_t
x;
register PixelPacket
*q;
size_t
bits_per_pixel,
height,
length,
width;
ssize_t
y;
/*
Open image file.
*/
assert(image_info != (const ImageInfo *) NULL);
assert(image_info->signature == MagickSignature);
if (image_info->debug != MagickFalse)
(void) LogMagickEvent(TraceEvent,GetMagickModule(),"%s",
image_info->filename);
assert(exception != (ExceptionInfo *) NULL);
assert(exception->signature == MagickSignature);
image=AcquireImage(image_info);
status=OpenBlob(image_info,image,ReadBinaryBlobMode,exception);
if (status == MagickFalse)
{
image=DestroyImageList(image);
return((Image *) NULL);
}
/*
Read PIX image.
*/
width=ReadBlobMSBShort(image);
height=ReadBlobMSBShort(image);
(void) ReadBlobMSBShort(image); /* x-offset */
(void) ReadBlobMSBShort(image); /* y-offset */
bits_per_pixel=ReadBlobMSBShort(image);
if ((width == 0UL) || (height == 0UL) || ((bits_per_pixel != 8) &&
(bits_per_pixel != 24)))
ThrowReaderException(CorruptImageError,"ImproperImageHeader");
do
{
/*
Initialize image structure.
*/
image->columns=width;
image->rows=height;
if (bits_per_pixel == 8)
if (AcquireImageColormap(image,256) == MagickFalse)
ThrowReaderException(ResourceLimitError,"MemoryAllocationFailed");
if ((image_info->ping != MagickFalse) && (image_info->number_scenes != 0))
if (image->scene >= (image_info->scene+image_info->number_scenes-1))
break;
/*
Convert PIX raster image to pixel packets.
*/
red=(Quantum) 0;
green=(Quantum) 0;
blue=(Quantum) 0;
index=(IndexPacket) 0;
length=0;
for (y=0; y < (ssize_t) image->rows; y++)
{
q=QueueAuthenticPixels(image,0,y,image->columns,1,exception);
if (q == (PixelPacket *) NULL)
break;
indexes=GetAuthenticIndexQueue(image);
for (x=0; x < (ssize_t) image->columns; x++)
{
if (length == 0)
{
length=(size_t) ReadBlobByte(image);
if (bits_per_pixel == 8)
index=ScaleCharToQuantum((unsigned char) ReadBlobByte(image));
else
{
blue=ScaleCharToQuantum((unsigned char) ReadBlobByte(image));
green=ScaleCharToQuantum((unsigned char) ReadBlobByte(image));
red=ScaleCharToQuantum((unsigned char) ReadBlobByte(image));
}
}
if (image->storage_class == PseudoClass)
SetPixelIndex(indexes+x,index);
SetPixelBlue(q,blue);
SetPixelGreen(q,green);
SetPixelRed(q,red);
length--;
q++;
}
if (SyncAuthenticPixels(image,exception) == MagickFalse)
break;
if (image->previous == (Image *) NULL)
{
status=SetImageProgress(image,LoadImageTag,(MagickOffsetType) y,
image->rows);
if (status == MagickFalse)
break;
}
}
if (image->storage_class == PseudoClass)
(void) SyncImage(image);
if (EOFBlob(image) != MagickFalse)
{
ThrowFileException(exception,CorruptImageError,"UnexpectedEndOfFile",
image->filename);
break;
}
/*
Proceed to next image.
*/
if (image_info->number_scenes != 0)
if (image->scene >= (image_info->scene+image_info->number_scenes-1))
break;
width=ReadBlobMSBLong(image);
height=ReadBlobMSBLong(image);
(void) ReadBlobMSBShort(image);
(void) ReadBlobMSBShort(image);
bits_per_pixel=ReadBlobMSBShort(image);
status=(width != 0UL) && (height == 0UL) && ((bits_per_pixel == 8) ||
(bits_per_pixel == 24)) ? MagickTrue : MagickFalse;
if (status != MagickFalse)
{
/*
Allocate next image structure.
*/
AcquireNextImage(image_info,image);
if (GetNextImageInList(image) == (Image *) NULL)
{
image=DestroyImageList(image);
return((Image *) NULL);
}
image=SyncNextImageInList(image);
status=SetImageProgress(image,LoadImagesTag,TellBlob(image),
GetBlobSize(image));
if (status == MagickFalse)
break;
}
} while (status != MagickFalse);
(void) CloseBlob(image);
return(GetFirstImageInList(image));
}
Vulnerability Type: DoS Overflow
CWE ID: CWE-119
Summary: Buffer overflow in the ReadVIFFImage function in coders/viff.c in ImageMagick before 6.9.4-5 allows remote attackers to cause a denial of service (application crash) via a crafted file.
Commit Message: | Medium | 168,594 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static int ext4_fill_flex_info(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_group_desc *gdp = NULL;
ext4_group_t flex_group_count;
ext4_group_t flex_group;
int groups_per_flex = 0;
size_t size;
int i;
sbi->s_log_groups_per_flex = sbi->s_es->s_log_groups_per_flex;
groups_per_flex = 1 << sbi->s_log_groups_per_flex;
if (groups_per_flex < 2) {
sbi->s_log_groups_per_flex = 0;
return 1;
}
/* We allocate both existing and potentially added groups */
flex_group_count = ((sbi->s_groups_count + groups_per_flex - 1) +
((le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) + 1) <<
EXT4_DESC_PER_BLOCK_BITS(sb))) / groups_per_flex;
size = flex_group_count * sizeof(struct flex_groups);
sbi->s_flex_groups = ext4_kvzalloc(size, GFP_KERNEL);
if (sbi->s_flex_groups == NULL) {
ext4_msg(sb, KERN_ERR, "not enough memory for %u flex groups",
flex_group_count);
goto failed;
}
for (i = 0; i < sbi->s_groups_count; i++) {
gdp = ext4_get_group_desc(sb, i, NULL);
flex_group = ext4_flex_group(sbi, i);
atomic_add(ext4_free_inodes_count(sb, gdp),
&sbi->s_flex_groups[flex_group].free_inodes);
atomic_add(ext4_free_group_clusters(sb, gdp),
&sbi->s_flex_groups[flex_group].free_clusters);
atomic_add(ext4_used_dirs_count(sb, gdp),
&sbi->s_flex_groups[flex_group].used_dirs);
}
return 1;
failed:
return 0;
}
Vulnerability Type: DoS
CWE ID: CWE-189
Summary: The ext4_fill_flex_info function in fs/ext4/super.c in the Linux kernel before 3.2.2, on the x86 platform and unspecified other platforms, allows user-assisted remote attackers to trigger inconsistent filesystem-groups data and possibly cause a denial of service via a malformed ext4 filesystem containing a super block with a large FLEX_BG group size (aka s_log_groups_per_flex value). NOTE: this vulnerability exists because of an incomplete fix for CVE-2009-4307.
Commit Message: ext4: fix undefined behavior in ext4_fill_flex_info()
Commit 503358ae01b70ce6909d19dd01287093f6b6271c ("ext4: avoid divide by
zero when trying to mount a corrupted file system") fixes CVE-2009-4307
by performing a sanity check on s_log_groups_per_flex, since it can be
set to a bogus value by an attacker.
sbi->s_log_groups_per_flex = sbi->s_es->s_log_groups_per_flex;
groups_per_flex = 1 << sbi->s_log_groups_per_flex;
if (groups_per_flex < 2) { ... }
This patch fixes two potential issues in the previous commit.
1) The sanity check might only work on architectures like PowerPC.
On x86, 5 bits are used for the shifting amount. That means, given a
large s_log_groups_per_flex value like 36, groups_per_flex = 1 << 36
is essentially 1 << 4 = 16, rather than 0. This will bypass the check,
leaving s_log_groups_per_flex and groups_per_flex inconsistent.
2) The sanity check relies on undefined behavior, i.e., oversized shift.
A standard-confirming C compiler could rewrite the check in unexpected
ways. Consider the following equivalent form, assuming groups_per_flex
is unsigned for simplicity.
groups_per_flex = 1 << sbi->s_log_groups_per_flex;
if (groups_per_flex == 0 || groups_per_flex == 1) {
We compile the code snippet using Clang 3.0 and GCC 4.6. Clang will
completely optimize away the check groups_per_flex == 0, leaving the
patched code as vulnerable as the original. GCC keeps the check, but
there is no guarantee that future versions will do the same.
Signed-off-by: Xi Wang <[email protected]>
Signed-off-by: "Theodore Ts'o" <[email protected]>
Cc: [email protected] | High | 165,619 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: static int proc_sys_readdir(struct file *file, struct dir_context *ctx)
{
struct ctl_table_header *head = grab_header(file_inode(file));
struct ctl_table_header *h = NULL;
struct ctl_table *entry;
struct ctl_dir *ctl_dir;
unsigned long pos;
if (IS_ERR(head))
return PTR_ERR(head);
ctl_dir = container_of(head, struct ctl_dir, header);
if (!dir_emit_dots(file, ctx))
return 0;
pos = 2;
for (first_entry(ctl_dir, &h, &entry); h; next_entry(&h, &entry)) {
if (!scan(h, entry, &pos, file, ctx)) {
sysctl_head_finish(h);
break;
}
}
sysctl_head_finish(head);
return 0;
}
Vulnerability Type: DoS
CWE ID: CWE-20
Summary: The cgroup offline implementation in the Linux kernel through 4.8.11 mishandles certain drain operations, which allows local users to cause a denial of service (system hang) by leveraging access to a container environment for executing a crafted application, as demonstrated by trinity.
Commit Message: sysctl: Drop reference added by grab_header in proc_sys_readdir
Fixes CVE-2016-9191, proc_sys_readdir doesn't drop reference
added by grab_header when return from !dir_emit_dots path.
It can cause any path called unregister_sysctl_table will
wait forever.
The calltrace of CVE-2016-9191:
[ 5535.960522] Call Trace:
[ 5535.963265] [<ffffffff817cdaaf>] schedule+0x3f/0xa0
[ 5535.968817] [<ffffffff817d33fb>] schedule_timeout+0x3db/0x6f0
[ 5535.975346] [<ffffffff817cf055>] ? wait_for_completion+0x45/0x130
[ 5535.982256] [<ffffffff817cf0d3>] wait_for_completion+0xc3/0x130
[ 5535.988972] [<ffffffff810d1fd0>] ? wake_up_q+0x80/0x80
[ 5535.994804] [<ffffffff8130de64>] drop_sysctl_table+0xc4/0xe0
[ 5536.001227] [<ffffffff8130de17>] drop_sysctl_table+0x77/0xe0
[ 5536.007648] [<ffffffff8130decd>] unregister_sysctl_table+0x4d/0xa0
[ 5536.014654] [<ffffffff8130deff>] unregister_sysctl_table+0x7f/0xa0
[ 5536.021657] [<ffffffff810f57f5>] unregister_sched_domain_sysctl+0x15/0x40
[ 5536.029344] [<ffffffff810d7704>] partition_sched_domains+0x44/0x450
[ 5536.036447] [<ffffffff817d0761>] ? __mutex_unlock_slowpath+0x111/0x1f0
[ 5536.043844] [<ffffffff81167684>] rebuild_sched_domains_locked+0x64/0xb0
[ 5536.051336] [<ffffffff8116789d>] update_flag+0x11d/0x210
[ 5536.057373] [<ffffffff817cf61f>] ? mutex_lock_nested+0x2df/0x450
[ 5536.064186] [<ffffffff81167acb>] ? cpuset_css_offline+0x1b/0x60
[ 5536.070899] [<ffffffff810fce3d>] ? trace_hardirqs_on+0xd/0x10
[ 5536.077420] [<ffffffff817cf61f>] ? mutex_lock_nested+0x2df/0x450
[ 5536.084234] [<ffffffff8115a9f5>] ? css_killed_work_fn+0x25/0x220
[ 5536.091049] [<ffffffff81167ae5>] cpuset_css_offline+0x35/0x60
[ 5536.097571] [<ffffffff8115aa2c>] css_killed_work_fn+0x5c/0x220
[ 5536.104207] [<ffffffff810bc83f>] process_one_work+0x1df/0x710
[ 5536.110736] [<ffffffff810bc7c0>] ? process_one_work+0x160/0x710
[ 5536.117461] [<ffffffff810bce9b>] worker_thread+0x12b/0x4a0
[ 5536.123697] [<ffffffff810bcd70>] ? process_one_work+0x710/0x710
[ 5536.130426] [<ffffffff810c3f7e>] kthread+0xfe/0x120
[ 5536.135991] [<ffffffff817d4baf>] ret_from_fork+0x1f/0x40
[ 5536.142041] [<ffffffff810c3e80>] ? kthread_create_on_node+0x230/0x230
One cgroup maintainer mentioned that "cgroup is trying to offline
a cpuset css, which takes place under cgroup_mutex. The offlining
ends up trying to drain active usages of a sysctl table which apprently
is not happening."
The real reason is that proc_sys_readdir doesn't drop reference added
by grab_header when return from !dir_emit_dots path. So this cpuset
offline path will wait here forever.
See here for details: http://www.openwall.com/lists/oss-security/2016/11/04/13
Fixes: f0c3b5093add ("[readdir] convert procfs")
Cc: [email protected]
Reported-by: CAI Qian <[email protected]>
Tested-by: Yang Shukui <[email protected]>
Signed-off-by: Zhou Chengming <[email protected]>
Acked-by: Al Viro <[email protected]>
Signed-off-by: Eric W. Biederman <[email protected]> | Medium | 166,895 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: void CleanUp(DownloadId id) {
MockDownloadFile* file = download_file_factory_->GetExistingFile(id);
ASSERT_TRUE(file != NULL);
EXPECT_CALL(*file, Cancel());
download_file_manager_->CancelDownload(id);
EXPECT_TRUE(NULL == download_file_manager_->GetDownloadFile(id));
}
Vulnerability Type: DoS Overflow
CWE ID: CWE-119
Summary: The PDF functionality in Google Chrome before 22.0.1229.79 allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors that trigger out-of-bounds write operations.
Commit Message: Refactors to simplify rename pathway in DownloadFileManager.
This is https://chromiumcodereview.appspot.com/10668004 / r144817 (reverted
due to CrOS failure) with the completion logic moved to after the
auto-opening. The tests that test the auto-opening (for web store install)
were waiting for download completion to check install, and hence were
failing when completion was moved earlier.
Doing this right would probably require another state (OPENED).
BUG=123998
BUG-134930
[email protected]
Review URL: https://chromiumcodereview.appspot.com/10701040
git-svn-id: svn://svn.chromium.org/chrome/trunk/src@145157 0039d316-1c4b-4281-b951-d872f2087c98 | Medium | 170,879 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: parse_toshiba_packet(FILE_T fh, struct wtap_pkthdr *phdr, Buffer *buf,
int *err, gchar **err_info)
{
union wtap_pseudo_header *pseudo_header = &phdr->pseudo_header;
char line[TOSHIBA_LINE_LENGTH];
int num_items_scanned;
int pkt_len, pktnum, hr, min, sec, csec;
char channel[10], direction[10];
int i, hex_lines;
guint8 *pd;
/* Our file pointer should be on the line containing the
* summary information for a packet. Read in that line and
* extract the useful information
*/
if (file_gets(line, TOSHIBA_LINE_LENGTH, fh) == NULL) {
*err = file_error(fh, err_info);
if (*err == 0) {
*err = WTAP_ERR_SHORT_READ;
}
return FALSE;
}
/* Find text in line after "[No.". Limit the length of the
* two strings since we have fixed buffers for channel[] and
* direction[] */
num_items_scanned = sscanf(line, "%9d] %2d:%2d:%2d.%9d %9s %9s",
&pktnum, &hr, &min, &sec, &csec, channel, direction);
if (num_items_scanned != 7) {
*err = WTAP_ERR_BAD_FILE;
*err_info = g_strdup("toshiba: record header isn't valid");
return FALSE;
}
/* Scan lines until we find the OFFSET line. In a "telnet" trace,
* this will be the next line. But if you save your telnet session
* to a file from within a Windows-based telnet client, it may
* put in line breaks at 80 columns (or however big your "telnet" box
* is). CRT (a Windows telnet app from VanDyke) does this.
* Here we assume that 80 columns will be the minimum size, and that
* the OFFSET line is not broken in the middle. It's the previous
* line that is normally long and can thus be broken at column 80.
*/
do {
if (file_gets(line, TOSHIBA_LINE_LENGTH, fh) == NULL) {
*err = file_error(fh, err_info);
if (*err == 0) {
*err = WTAP_ERR_SHORT_READ;
}
return FALSE;
}
/* Check for "OFFSET 0001-0203" at beginning of line */
line[16] = '\0';
} while (strcmp(line, "OFFSET 0001-0203") != 0);
num_items_scanned = sscanf(line+64, "LEN=%9d", &pkt_len);
if (num_items_scanned != 1) {
*err = WTAP_ERR_BAD_FILE;
*err_info = g_strdup("toshiba: OFFSET line doesn't have valid LEN item");
return FALSE;
}
phdr->rec_type = REC_TYPE_PACKET;
phdr->presence_flags = WTAP_HAS_TS|WTAP_HAS_CAP_LEN;
phdr->ts.secs = hr * 3600 + min * 60 + sec;
phdr->ts.nsecs = csec * 10000000;
phdr->caplen = pkt_len;
phdr->len = pkt_len;
switch (channel[0]) {
case 'B':
phdr->pkt_encap = WTAP_ENCAP_ISDN;
pseudo_header->isdn.uton = (direction[0] == 'T');
pseudo_header->isdn.channel = (guint8)
strtol(&channel[1], NULL, 10);
break;
case 'D':
phdr->pkt_encap = WTAP_ENCAP_ISDN;
pseudo_header->isdn.uton = (direction[0] == 'T');
pseudo_header->isdn.channel = 0;
break;
default:
phdr->pkt_encap = WTAP_ENCAP_ETHERNET;
/* XXX - is there an FCS in the frame? */
pseudo_header->eth.fcs_len = -1;
break;
}
/* Make sure we have enough room for the packet */
ws_buffer_assure_space(buf, TOSHIBA_MAX_PACKET_LEN);
pd = ws_buffer_start_ptr(buf);
/* Calculate the number of hex dump lines, each
* containing 16 bytes of data */
hex_lines = pkt_len / 16 + ((pkt_len % 16) ? 1 : 0);
for (i = 0; i < hex_lines; i++) {
if (file_gets(line, TOSHIBA_LINE_LENGTH, fh) == NULL) {
*err = file_error(fh, err_info);
if (*err == 0) {
*err = WTAP_ERR_SHORT_READ;
}
return FALSE;
}
if (!parse_single_hex_dump_line(line, pd, i * 16)) {
*err = WTAP_ERR_BAD_FILE;
*err_info = g_strdup("toshiba: hex dump not valid");
return FALSE;
}
}
return TRUE;
}
Vulnerability Type: DoS
CWE ID: CWE-20
Summary: wiretap/toshiba.c in the Toshiba file parser in Wireshark 1.12.x before 1.12.12 and 2.x before 2.0.4 mishandles sscanf unsigned-integer processing, which allows remote attackers to cause a denial of service (application crash) via a crafted file.
Commit Message: Fix packet length handling.
Treat the packet length as unsigned - it shouldn't be negative in the
file. If it is, that'll probably cause the sscanf to fail, so we'll
report the file as bad.
Check it against WTAP_MAX_PACKET_SIZE to make sure we don't try to
allocate a huge amount of memory, just as we do in other file readers.
Use the now-validated packet size as the length in
ws_buffer_assure_space(), so we are certain to have enough space, and
don't allocate too much space.
Bug: 12394
Change-Id: Ifa023ce70f7a2697bf151009b035a6e6cf8d5d90
Reviewed-on: https://code.wireshark.org/review/15169
Reviewed-by: Guy Harris <[email protected]> | Medium | 169,967 |
Analyze the following vulnerable code snippet, vulnerability type with description, the commit message and the CWE ID. Determine the severity score category of this vulnerability. Output 'High' or 'Medium' or 'Low' only. Remember, I want response in 'High' or 'Medium' or 'Low', No explanation. | Code: Cues::Cues(
Segment* pSegment,
long long start_,
long long size_,
long long element_start,
long long element_size) :
m_pSegment(pSegment),
m_start(start_),
m_size(size_),
m_element_start(element_start),
m_element_size(element_size),
m_cue_points(NULL),
m_count(0),
m_preload_count(0),
m_pos(start_)
{
}
Vulnerability Type: DoS Exec Code Overflow Mem. Corr.
CWE ID: CWE-119
Summary: libvpx in mediaserver in Android 4.x before 4.4.4, 5.x before 5.1.1 LMY49H, and 6.0 before 2016-03-01 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted media file, related to libwebm/mkvparser.cpp and other files, aka internal bug 23452792.
Commit Message: libwebm: Pull from upstream
Rolling mkvparser from upstream. Primarily for fixing a bug on parsing
failures with certain Opus WebM files.
Upstream commit hash of this pull: 574045edd4ecbeb802ee3f1d214b5510269852ae
The diff is so huge because there were some style clean ups upstream.
But it was ensured that there were no breaking changes when the style
clean ups was done upstream.
Change-Id: Ib6e907175484b4b0ae1b55ab39522ea3188ad039 | High | 174,262 |
End of preview. Expand
in Dataset Viewer.
README.md exists but content is empty.
- Downloads last month
- 23