module_content
stringlengths 18
1.05M
|
|---|
module axi_data_fifo_v2_1_axic_reg_srl_fifo #
(
parameter C_FAMILY = "none", // FPGA Family
parameter integer C_FIFO_WIDTH = 1, // Width of S_MESG/M_MESG.
parameter integer C_MAX_CTRL_FANOUT = 33, // Maximum number of mesg bits
// the control logic can be used
// on before the control logic
// needs to be replicated.
parameter integer C_FIFO_DEPTH_LOG = 2, // Depth of FIFO is 2**C_FIFO_DEPTH_LOG.
// The minimum size fifo generated is 4-deep.
parameter C_USE_FULL = 1 // Prevent overwrite by throttling S_READY.
)
(
input wire ACLK, // Clock
input wire ARESET, // Reset
input wire [C_FIFO_WIDTH-1:0] S_MESG, // Input data
input wire S_VALID, // Input data valid
output wire S_READY, // Input data ready
output wire [C_FIFO_WIDTH-1:0] M_MESG, // Output data
output wire M_VALID, // Output data valid
input wire M_READY // Output data ready
);
localparam P_FIFO_DEPTH_LOG = (C_FIFO_DEPTH_LOG>1) ? C_FIFO_DEPTH_LOG : 2;
localparam P_EMPTY = {P_FIFO_DEPTH_LOG{1'b1}};
localparam P_ALMOSTEMPTY = {P_FIFO_DEPTH_LOG{1'b0}};
localparam P_ALMOSTFULL_TEMP = {P_EMPTY, 1'b0};
localparam P_ALMOSTFULL = P_ALMOSTFULL_TEMP[0+:P_FIFO_DEPTH_LOG];
localparam P_NUM_REPS = (((C_FIFO_WIDTH+1)%C_MAX_CTRL_FANOUT) == 0) ?
(C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT :
((C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT)+1;
(* syn_keep = "1" *) reg [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr;
(* syn_keep = "1" *) wire [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr_i;
genvar i;
genvar j;
reg m_valid_i;
reg s_ready_i;
wire push; // FIFO push
wire pop; // FIFO pop
reg areset_d1; // Reset delay register
reg [C_FIFO_WIDTH-1:0] storage_data1;
wire [C_FIFO_WIDTH-1:0] storage_data2; // Intermediate SRL data
reg load_s1;
wire load_s1_from_s2;
reg [1:0] state;
localparam [1:0]
ZERO = 2'b10,
ONE = 2'b11,
TWO = 2'b01;
assign M_VALID = m_valid_i;
assign S_READY = C_USE_FULL ? s_ready_i : 1'b1;
assign push = (S_VALID & (C_USE_FULL ? s_ready_i : 1'b1) & (state == TWO)) | (~M_READY & S_VALID & (state == ONE));
assign pop = M_READY & (state == TWO);
assign M_MESG = storage_data1;
always @(posedge ACLK) begin
areset_d1 <= ARESET;
end
// Load storage1 with either slave side data or from storage2
always @(posedge ACLK)
begin
if (load_s1)
if (load_s1_from_s2)
storage_data1 <= storage_data2;
else
storage_data1 <= S_MESG;
end
// Loading s1
always @ *
begin
if ( ((state == ZERO) && (S_VALID == 1)) || // Load when empty on slave transaction
// Load when ONE if we both have read and write at the same time
((state == ONE) && (S_VALID == 1) && (M_READY == 1)) ||
// Load when TWO and we have a transaction on Master side
((state == TWO) && (M_READY == 1)))
load_s1 = 1'b1;
else
load_s1 = 1'b0;
end // always @ *
assign load_s1_from_s2 = (state == TWO);
// State Machine for handling output signals
always @(posedge ACLK)
begin
if (areset_d1) begin
state <= ZERO;
m_valid_i <= 1'b0;
end else begin
case (state)
// No transaction stored locally
ZERO: begin
if (S_VALID) begin
state <= ONE; // Got one so move to ONE
m_valid_i <= 1'b1;
end
end
// One transaction stored locally
ONE: begin
if (M_READY & ~S_VALID) begin
state <= ZERO; // Read out one so move to ZERO
m_valid_i <= 1'b0;
end else if (~M_READY & S_VALID) begin
state <= TWO; // Got another one so move to TWO
m_valid_i <= 1'b1;
end
end
// TWO transaction stored locally
TWO: begin
if ((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTEMPTY) && pop && ~push) begin
state <= ONE; // Read out one so move to ONE
m_valid_i <= 1'b1;
end
end
endcase // case (state)
end
end // always @ (posedge ACLK)
generate
//---------------------------------------------------------------------------
// Create count of number of elements in FIFOs
//---------------------------------------------------------------------------
for (i=0;i<P_NUM_REPS;i=i+1) begin : gen_rep
assign fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] =
push ? fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] + 1 :
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] - 1;
always @(posedge ACLK) begin
if (ARESET)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
{P_FIFO_DEPTH_LOG{1'b1}};
else if (push ^ pop)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i];
end
end
always @(posedge ACLK) begin
if (ARESET) begin
s_ready_i <= 1'b0;
end else if (areset_d1) begin
s_ready_i <= 1'b1;
end else if (C_USE_FULL &&
((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTFULL) && push && ~pop)) begin
s_ready_i <= 1'b0;
end else if (C_USE_FULL && pop) begin
s_ready_i <= 1'b1;
end
end
//---------------------------------------------------------------------------
// Instantiate SRLs
//---------------------------------------------------------------------------
for (i=0;i<(C_FIFO_WIDTH/C_MAX_CTRL_FANOUT)+((C_FIFO_WIDTH%C_MAX_CTRL_FANOUT)>0);i=i+1) begin : gen_srls
for (j=0;((j<C_MAX_CTRL_FANOUT)&&(i*C_MAX_CTRL_FANOUT+j<C_FIFO_WIDTH));j=j+1) begin : gen_rep
axi_data_fifo_v2_1_ndeep_srl #
(
.C_FAMILY (C_FAMILY),
.C_A_WIDTH (P_FIFO_DEPTH_LOG)
)
srl_nx1
(
.CLK (ACLK),
.A (fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:
P_FIFO_DEPTH_LOG*(i)]),
.CE (push),
.D (S_MESG[i*C_MAX_CTRL_FANOUT+j]),
.Q (storage_data2[i*C_MAX_CTRL_FANOUT+j])
);
end
end
endgenerate
endmodule
|
module axi_data_fifo_v2_1_axic_reg_srl_fifo #
(
parameter C_FAMILY = "none", // FPGA Family
parameter integer C_FIFO_WIDTH = 1, // Width of S_MESG/M_MESG.
parameter integer C_MAX_CTRL_FANOUT = 33, // Maximum number of mesg bits
// the control logic can be used
// on before the control logic
// needs to be replicated.
parameter integer C_FIFO_DEPTH_LOG = 2, // Depth of FIFO is 2**C_FIFO_DEPTH_LOG.
// The minimum size fifo generated is 4-deep.
parameter C_USE_FULL = 1 // Prevent overwrite by throttling S_READY.
)
(
input wire ACLK, // Clock
input wire ARESET, // Reset
input wire [C_FIFO_WIDTH-1:0] S_MESG, // Input data
input wire S_VALID, // Input data valid
output wire S_READY, // Input data ready
output wire [C_FIFO_WIDTH-1:0] M_MESG, // Output data
output wire M_VALID, // Output data valid
input wire M_READY // Output data ready
);
localparam P_FIFO_DEPTH_LOG = (C_FIFO_DEPTH_LOG>1) ? C_FIFO_DEPTH_LOG : 2;
localparam P_EMPTY = {P_FIFO_DEPTH_LOG{1'b1}};
localparam P_ALMOSTEMPTY = {P_FIFO_DEPTH_LOG{1'b0}};
localparam P_ALMOSTFULL_TEMP = {P_EMPTY, 1'b0};
localparam P_ALMOSTFULL = P_ALMOSTFULL_TEMP[0+:P_FIFO_DEPTH_LOG];
localparam P_NUM_REPS = (((C_FIFO_WIDTH+1)%C_MAX_CTRL_FANOUT) == 0) ?
(C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT :
((C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT)+1;
(* syn_keep = "1" *) reg [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr;
(* syn_keep = "1" *) wire [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr_i;
genvar i;
genvar j;
reg m_valid_i;
reg s_ready_i;
wire push; // FIFO push
wire pop; // FIFO pop
reg areset_d1; // Reset delay register
reg [C_FIFO_WIDTH-1:0] storage_data1;
wire [C_FIFO_WIDTH-1:0] storage_data2; // Intermediate SRL data
reg load_s1;
wire load_s1_from_s2;
reg [1:0] state;
localparam [1:0]
ZERO = 2'b10,
ONE = 2'b11,
TWO = 2'b01;
assign M_VALID = m_valid_i;
assign S_READY = C_USE_FULL ? s_ready_i : 1'b1;
assign push = (S_VALID & (C_USE_FULL ? s_ready_i : 1'b1) & (state == TWO)) | (~M_READY & S_VALID & (state == ONE));
assign pop = M_READY & (state == TWO);
assign M_MESG = storage_data1;
always @(posedge ACLK) begin
areset_d1 <= ARESET;
end
// Load storage1 with either slave side data or from storage2
always @(posedge ACLK)
begin
if (load_s1)
if (load_s1_from_s2)
storage_data1 <= storage_data2;
else
storage_data1 <= S_MESG;
end
// Loading s1
always @ *
begin
if ( ((state == ZERO) && (S_VALID == 1)) || // Load when empty on slave transaction
// Load when ONE if we both have read and write at the same time
((state == ONE) && (S_VALID == 1) && (M_READY == 1)) ||
// Load when TWO and we have a transaction on Master side
((state == TWO) && (M_READY == 1)))
load_s1 = 1'b1;
else
load_s1 = 1'b0;
end // always @ *
assign load_s1_from_s2 = (state == TWO);
// State Machine for handling output signals
always @(posedge ACLK)
begin
if (areset_d1) begin
state <= ZERO;
m_valid_i <= 1'b0;
end else begin
case (state)
// No transaction stored locally
ZERO: begin
if (S_VALID) begin
state <= ONE; // Got one so move to ONE
m_valid_i <= 1'b1;
end
end
// One transaction stored locally
ONE: begin
if (M_READY & ~S_VALID) begin
state <= ZERO; // Read out one so move to ZERO
m_valid_i <= 1'b0;
end else if (~M_READY & S_VALID) begin
state <= TWO; // Got another one so move to TWO
m_valid_i <= 1'b1;
end
end
// TWO transaction stored locally
TWO: begin
if ((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTEMPTY) && pop && ~push) begin
state <= ONE; // Read out one so move to ONE
m_valid_i <= 1'b1;
end
end
endcase // case (state)
end
end // always @ (posedge ACLK)
generate
//---------------------------------------------------------------------------
// Create count of number of elements in FIFOs
//---------------------------------------------------------------------------
for (i=0;i<P_NUM_REPS;i=i+1) begin : gen_rep
assign fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] =
push ? fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] + 1 :
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] - 1;
always @(posedge ACLK) begin
if (ARESET)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
{P_FIFO_DEPTH_LOG{1'b1}};
else if (push ^ pop)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i];
end
end
always @(posedge ACLK) begin
if (ARESET) begin
s_ready_i <= 1'b0;
end else if (areset_d1) begin
s_ready_i <= 1'b1;
end else if (C_USE_FULL &&
((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTFULL) && push && ~pop)) begin
s_ready_i <= 1'b0;
end else if (C_USE_FULL && pop) begin
s_ready_i <= 1'b1;
end
end
//---------------------------------------------------------------------------
// Instantiate SRLs
//---------------------------------------------------------------------------
for (i=0;i<(C_FIFO_WIDTH/C_MAX_CTRL_FANOUT)+((C_FIFO_WIDTH%C_MAX_CTRL_FANOUT)>0);i=i+1) begin : gen_srls
for (j=0;((j<C_MAX_CTRL_FANOUT)&&(i*C_MAX_CTRL_FANOUT+j<C_FIFO_WIDTH));j=j+1) begin : gen_rep
axi_data_fifo_v2_1_ndeep_srl #
(
.C_FAMILY (C_FAMILY),
.C_A_WIDTH (P_FIFO_DEPTH_LOG)
)
srl_nx1
(
.CLK (ACLK),
.A (fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:
P_FIFO_DEPTH_LOG*(i)]),
.CE (push),
.D (S_MESG[i*C_MAX_CTRL_FANOUT+j]),
.Q (storage_data2[i*C_MAX_CTRL_FANOUT+j])
);
end
end
endgenerate
endmodule
|
module axi_data_fifo_v2_1_axic_reg_srl_fifo #
(
parameter C_FAMILY = "none", // FPGA Family
parameter integer C_FIFO_WIDTH = 1, // Width of S_MESG/M_MESG.
parameter integer C_MAX_CTRL_FANOUT = 33, // Maximum number of mesg bits
// the control logic can be used
// on before the control logic
// needs to be replicated.
parameter integer C_FIFO_DEPTH_LOG = 2, // Depth of FIFO is 2**C_FIFO_DEPTH_LOG.
// The minimum size fifo generated is 4-deep.
parameter C_USE_FULL = 1 // Prevent overwrite by throttling S_READY.
)
(
input wire ACLK, // Clock
input wire ARESET, // Reset
input wire [C_FIFO_WIDTH-1:0] S_MESG, // Input data
input wire S_VALID, // Input data valid
output wire S_READY, // Input data ready
output wire [C_FIFO_WIDTH-1:0] M_MESG, // Output data
output wire M_VALID, // Output data valid
input wire M_READY // Output data ready
);
localparam P_FIFO_DEPTH_LOG = (C_FIFO_DEPTH_LOG>1) ? C_FIFO_DEPTH_LOG : 2;
localparam P_EMPTY = {P_FIFO_DEPTH_LOG{1'b1}};
localparam P_ALMOSTEMPTY = {P_FIFO_DEPTH_LOG{1'b0}};
localparam P_ALMOSTFULL_TEMP = {P_EMPTY, 1'b0};
localparam P_ALMOSTFULL = P_ALMOSTFULL_TEMP[0+:P_FIFO_DEPTH_LOG];
localparam P_NUM_REPS = (((C_FIFO_WIDTH+1)%C_MAX_CTRL_FANOUT) == 0) ?
(C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT :
((C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT)+1;
(* syn_keep = "1" *) reg [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr;
(* syn_keep = "1" *) wire [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr_i;
genvar i;
genvar j;
reg m_valid_i;
reg s_ready_i;
wire push; // FIFO push
wire pop; // FIFO pop
reg areset_d1; // Reset delay register
reg [C_FIFO_WIDTH-1:0] storage_data1;
wire [C_FIFO_WIDTH-1:0] storage_data2; // Intermediate SRL data
reg load_s1;
wire load_s1_from_s2;
reg [1:0] state;
localparam [1:0]
ZERO = 2'b10,
ONE = 2'b11,
TWO = 2'b01;
assign M_VALID = m_valid_i;
assign S_READY = C_USE_FULL ? s_ready_i : 1'b1;
assign push = (S_VALID & (C_USE_FULL ? s_ready_i : 1'b1) & (state == TWO)) | (~M_READY & S_VALID & (state == ONE));
assign pop = M_READY & (state == TWO);
assign M_MESG = storage_data1;
always @(posedge ACLK) begin
areset_d1 <= ARESET;
end
// Load storage1 with either slave side data or from storage2
always @(posedge ACLK)
begin
if (load_s1)
if (load_s1_from_s2)
storage_data1 <= storage_data2;
else
storage_data1 <= S_MESG;
end
// Loading s1
always @ *
begin
if ( ((state == ZERO) && (S_VALID == 1)) || // Load when empty on slave transaction
// Load when ONE if we both have read and write at the same time
((state == ONE) && (S_VALID == 1) && (M_READY == 1)) ||
// Load when TWO and we have a transaction on Master side
((state == TWO) && (M_READY == 1)))
load_s1 = 1'b1;
else
load_s1 = 1'b0;
end // always @ *
assign load_s1_from_s2 = (state == TWO);
// State Machine for handling output signals
always @(posedge ACLK)
begin
if (areset_d1) begin
state <= ZERO;
m_valid_i <= 1'b0;
end else begin
case (state)
// No transaction stored locally
ZERO: begin
if (S_VALID) begin
state <= ONE; // Got one so move to ONE
m_valid_i <= 1'b1;
end
end
// One transaction stored locally
ONE: begin
if (M_READY & ~S_VALID) begin
state <= ZERO; // Read out one so move to ZERO
m_valid_i <= 1'b0;
end else if (~M_READY & S_VALID) begin
state <= TWO; // Got another one so move to TWO
m_valid_i <= 1'b1;
end
end
// TWO transaction stored locally
TWO: begin
if ((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTEMPTY) && pop && ~push) begin
state <= ONE; // Read out one so move to ONE
m_valid_i <= 1'b1;
end
end
endcase // case (state)
end
end // always @ (posedge ACLK)
generate
//---------------------------------------------------------------------------
// Create count of number of elements in FIFOs
//---------------------------------------------------------------------------
for (i=0;i<P_NUM_REPS;i=i+1) begin : gen_rep
assign fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] =
push ? fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] + 1 :
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] - 1;
always @(posedge ACLK) begin
if (ARESET)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
{P_FIFO_DEPTH_LOG{1'b1}};
else if (push ^ pop)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i];
end
end
always @(posedge ACLK) begin
if (ARESET) begin
s_ready_i <= 1'b0;
end else if (areset_d1) begin
s_ready_i <= 1'b1;
end else if (C_USE_FULL &&
((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTFULL) && push && ~pop)) begin
s_ready_i <= 1'b0;
end else if (C_USE_FULL && pop) begin
s_ready_i <= 1'b1;
end
end
//---------------------------------------------------------------------------
// Instantiate SRLs
//---------------------------------------------------------------------------
for (i=0;i<(C_FIFO_WIDTH/C_MAX_CTRL_FANOUT)+((C_FIFO_WIDTH%C_MAX_CTRL_FANOUT)>0);i=i+1) begin : gen_srls
for (j=0;((j<C_MAX_CTRL_FANOUT)&&(i*C_MAX_CTRL_FANOUT+j<C_FIFO_WIDTH));j=j+1) begin : gen_rep
axi_data_fifo_v2_1_ndeep_srl #
(
.C_FAMILY (C_FAMILY),
.C_A_WIDTH (P_FIFO_DEPTH_LOG)
)
srl_nx1
(
.CLK (ACLK),
.A (fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:
P_FIFO_DEPTH_LOG*(i)]),
.CE (push),
.D (S_MESG[i*C_MAX_CTRL_FANOUT+j]),
.Q (storage_data2[i*C_MAX_CTRL_FANOUT+j])
);
end
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_sel_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire S,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 2;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] v_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign v_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign v_local = C_VALUE;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b0 ) ) |
( ( b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b1 ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_sel_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire S,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 2;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] v_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign v_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign v_local = C_VALUE;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b0 ) ) |
( ( b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b1 ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_sel_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire S,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 2;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] v_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign v_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign v_local = C_VALUE;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b0 ) ) |
( ( b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b1 ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_sel_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire S,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 2;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] v_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign v_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign v_local = C_VALUE;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b0 ) ) |
( ( b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b1 ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_sel_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire S,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 2;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] v_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign v_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign v_local = C_VALUE;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b0 ) ) |
( ( b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b1 ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_sel_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire S,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 2;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] v_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign v_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign v_local = C_VALUE;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b0 ) ) |
( ( b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b1 ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_sel_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire S,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 2;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] v_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign v_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign v_local = C_VALUE;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b0 ) ) |
( ( b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
v_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) & ( S == 1'b1 ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module axi_data_fifo_v2_1_axic_srl_fifo #
(
parameter C_FAMILY = "none", // FPGA Family
parameter integer C_FIFO_WIDTH = 1, // Width of S_MESG/M_MESG.
parameter integer C_MAX_CTRL_FANOUT = 33, // Maximum number of mesg bits
// the control logic can be used
// on before the control logic
// needs to be replicated.
parameter integer C_FIFO_DEPTH_LOG = 2, // Depth of FIFO is 2**C_FIFO_DEPTH_LOG.
// The minimum size fifo generated is 4-deep.
parameter C_USE_FULL = 1 // Prevent overwrite by throttling S_READY.
)
(
input wire ACLK, // Clock
input wire ARESET, // Reset
input wire [C_FIFO_WIDTH-1:0] S_MESG, // Input data
input wire S_VALID, // Input data valid
output wire S_READY, // Input data ready
output wire [C_FIFO_WIDTH-1:0] M_MESG, // Output data
output wire M_VALID, // Output data valid
input wire M_READY // Output data ready
);
localparam P_FIFO_DEPTH_LOG = (C_FIFO_DEPTH_LOG>1) ? C_FIFO_DEPTH_LOG : 2;
localparam P_EMPTY = {P_FIFO_DEPTH_LOG{1'b1}};
localparam P_ALMOSTEMPTY = {P_FIFO_DEPTH_LOG{1'b0}};
localparam P_ALMOSTFULL_TEMP = {P_EMPTY, 1'b0};
localparam P_ALMOSTFULL = P_ALMOSTFULL_TEMP[0+:P_FIFO_DEPTH_LOG];
localparam P_NUM_REPS = (((C_FIFO_WIDTH+1)%C_MAX_CTRL_FANOUT) == 0) ?
(C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT :
((C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT)+1;
(* syn_keep = "1" *) reg [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr;
(* syn_keep = "1" *) wire [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr_i;
genvar i;
genvar j;
reg M_VALID_i;
reg S_READY_i;
wire push; // FIFO push
wire pop; // FIFO pop
reg areset_d1; // Reset delay register
wire [C_FIFO_WIDTH-1:0] m_axi_mesg_i; // Intermediate SRL data
assign M_VALID = M_VALID_i;
assign S_READY = C_USE_FULL ? S_READY_i : 1'b1;
assign M_MESG = m_axi_mesg_i;
assign push = S_VALID & (C_USE_FULL ? S_READY_i : 1'b1);
assign pop = M_VALID_i & M_READY;
always @(posedge ACLK) begin
areset_d1 <= ARESET;
end
generate
//---------------------------------------------------------------------------
// Create count of number of elements in FIFOs
//---------------------------------------------------------------------------
for (i=0;i<P_NUM_REPS;i=i+1) begin : gen_rep
assign fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] =
push ? fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] + 1 :
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] - 1;
always @(posedge ACLK) begin
if (ARESET)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
{P_FIFO_DEPTH_LOG{1'b1}};
else if (push ^ pop)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i];
end
end
//---------------------------------------------------------------------------
// When FIFO is empty, reset master valid bit. When not empty set valid bit.
// When FIFO is full, reset slave ready bit. When not full set ready bit.
//---------------------------------------------------------------------------
always @(posedge ACLK) begin
if (ARESET) begin
M_VALID_i <= 1'b0;
end else if ((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTEMPTY) && pop && ~push) begin
M_VALID_i <= 1'b0;
end else if (push) begin
M_VALID_i <= 1'b1;
end
end
always @(posedge ACLK) begin
if (ARESET) begin
S_READY_i <= 1'b0;
end else if (areset_d1) begin
S_READY_i <= 1'b1;
end else if (C_USE_FULL &&
((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTFULL) && push && ~pop)) begin
S_READY_i <= 1'b0;
end else if (C_USE_FULL && pop) begin
S_READY_i <= 1'b1;
end
end
//---------------------------------------------------------------------------
// Instantiate SRLs
//---------------------------------------------------------------------------
for (i=0;i<(C_FIFO_WIDTH/C_MAX_CTRL_FANOUT)+((C_FIFO_WIDTH%C_MAX_CTRL_FANOUT)>0);i=i+1) begin : gen_srls
for (j=0;((j<C_MAX_CTRL_FANOUT)&&(i*C_MAX_CTRL_FANOUT+j<C_FIFO_WIDTH));j=j+1) begin : gen_rep
axi_data_fifo_v2_1_ndeep_srl #
(
.C_FAMILY (C_FAMILY),
.C_A_WIDTH (P_FIFO_DEPTH_LOG)
)
srl_nx1
(
.CLK (ACLK),
.A (fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:
P_FIFO_DEPTH_LOG*(i)]),
.CE (push),
.D (S_MESG[i*C_MAX_CTRL_FANOUT+j]),
.Q (m_axi_mesg_i[i*C_MAX_CTRL_FANOUT+j])
);
end
end
endgenerate
endmodule
|
module axi_data_fifo_v2_1_axic_srl_fifo #
(
parameter C_FAMILY = "none", // FPGA Family
parameter integer C_FIFO_WIDTH = 1, // Width of S_MESG/M_MESG.
parameter integer C_MAX_CTRL_FANOUT = 33, // Maximum number of mesg bits
// the control logic can be used
// on before the control logic
// needs to be replicated.
parameter integer C_FIFO_DEPTH_LOG = 2, // Depth of FIFO is 2**C_FIFO_DEPTH_LOG.
// The minimum size fifo generated is 4-deep.
parameter C_USE_FULL = 1 // Prevent overwrite by throttling S_READY.
)
(
input wire ACLK, // Clock
input wire ARESET, // Reset
input wire [C_FIFO_WIDTH-1:0] S_MESG, // Input data
input wire S_VALID, // Input data valid
output wire S_READY, // Input data ready
output wire [C_FIFO_WIDTH-1:0] M_MESG, // Output data
output wire M_VALID, // Output data valid
input wire M_READY // Output data ready
);
localparam P_FIFO_DEPTH_LOG = (C_FIFO_DEPTH_LOG>1) ? C_FIFO_DEPTH_LOG : 2;
localparam P_EMPTY = {P_FIFO_DEPTH_LOG{1'b1}};
localparam P_ALMOSTEMPTY = {P_FIFO_DEPTH_LOG{1'b0}};
localparam P_ALMOSTFULL_TEMP = {P_EMPTY, 1'b0};
localparam P_ALMOSTFULL = P_ALMOSTFULL_TEMP[0+:P_FIFO_DEPTH_LOG];
localparam P_NUM_REPS = (((C_FIFO_WIDTH+1)%C_MAX_CTRL_FANOUT) == 0) ?
(C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT :
((C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT)+1;
(* syn_keep = "1" *) reg [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr;
(* syn_keep = "1" *) wire [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr_i;
genvar i;
genvar j;
reg M_VALID_i;
reg S_READY_i;
wire push; // FIFO push
wire pop; // FIFO pop
reg areset_d1; // Reset delay register
wire [C_FIFO_WIDTH-1:0] m_axi_mesg_i; // Intermediate SRL data
assign M_VALID = M_VALID_i;
assign S_READY = C_USE_FULL ? S_READY_i : 1'b1;
assign M_MESG = m_axi_mesg_i;
assign push = S_VALID & (C_USE_FULL ? S_READY_i : 1'b1);
assign pop = M_VALID_i & M_READY;
always @(posedge ACLK) begin
areset_d1 <= ARESET;
end
generate
//---------------------------------------------------------------------------
// Create count of number of elements in FIFOs
//---------------------------------------------------------------------------
for (i=0;i<P_NUM_REPS;i=i+1) begin : gen_rep
assign fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] =
push ? fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] + 1 :
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] - 1;
always @(posedge ACLK) begin
if (ARESET)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
{P_FIFO_DEPTH_LOG{1'b1}};
else if (push ^ pop)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i];
end
end
//---------------------------------------------------------------------------
// When FIFO is empty, reset master valid bit. When not empty set valid bit.
// When FIFO is full, reset slave ready bit. When not full set ready bit.
//---------------------------------------------------------------------------
always @(posedge ACLK) begin
if (ARESET) begin
M_VALID_i <= 1'b0;
end else if ((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTEMPTY) && pop && ~push) begin
M_VALID_i <= 1'b0;
end else if (push) begin
M_VALID_i <= 1'b1;
end
end
always @(posedge ACLK) begin
if (ARESET) begin
S_READY_i <= 1'b0;
end else if (areset_d1) begin
S_READY_i <= 1'b1;
end else if (C_USE_FULL &&
((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTFULL) && push && ~pop)) begin
S_READY_i <= 1'b0;
end else if (C_USE_FULL && pop) begin
S_READY_i <= 1'b1;
end
end
//---------------------------------------------------------------------------
// Instantiate SRLs
//---------------------------------------------------------------------------
for (i=0;i<(C_FIFO_WIDTH/C_MAX_CTRL_FANOUT)+((C_FIFO_WIDTH%C_MAX_CTRL_FANOUT)>0);i=i+1) begin : gen_srls
for (j=0;((j<C_MAX_CTRL_FANOUT)&&(i*C_MAX_CTRL_FANOUT+j<C_FIFO_WIDTH));j=j+1) begin : gen_rep
axi_data_fifo_v2_1_ndeep_srl #
(
.C_FAMILY (C_FAMILY),
.C_A_WIDTH (P_FIFO_DEPTH_LOG)
)
srl_nx1
(
.CLK (ACLK),
.A (fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:
P_FIFO_DEPTH_LOG*(i)]),
.CE (push),
.D (S_MESG[i*C_MAX_CTRL_FANOUT+j]),
.Q (m_axi_mesg_i[i*C_MAX_CTRL_FANOUT+j])
);
end
end
endgenerate
endmodule
|
module axi_data_fifo_v2_1_axic_srl_fifo #
(
parameter C_FAMILY = "none", // FPGA Family
parameter integer C_FIFO_WIDTH = 1, // Width of S_MESG/M_MESG.
parameter integer C_MAX_CTRL_FANOUT = 33, // Maximum number of mesg bits
// the control logic can be used
// on before the control logic
// needs to be replicated.
parameter integer C_FIFO_DEPTH_LOG = 2, // Depth of FIFO is 2**C_FIFO_DEPTH_LOG.
// The minimum size fifo generated is 4-deep.
parameter C_USE_FULL = 1 // Prevent overwrite by throttling S_READY.
)
(
input wire ACLK, // Clock
input wire ARESET, // Reset
input wire [C_FIFO_WIDTH-1:0] S_MESG, // Input data
input wire S_VALID, // Input data valid
output wire S_READY, // Input data ready
output wire [C_FIFO_WIDTH-1:0] M_MESG, // Output data
output wire M_VALID, // Output data valid
input wire M_READY // Output data ready
);
localparam P_FIFO_DEPTH_LOG = (C_FIFO_DEPTH_LOG>1) ? C_FIFO_DEPTH_LOG : 2;
localparam P_EMPTY = {P_FIFO_DEPTH_LOG{1'b1}};
localparam P_ALMOSTEMPTY = {P_FIFO_DEPTH_LOG{1'b0}};
localparam P_ALMOSTFULL_TEMP = {P_EMPTY, 1'b0};
localparam P_ALMOSTFULL = P_ALMOSTFULL_TEMP[0+:P_FIFO_DEPTH_LOG];
localparam P_NUM_REPS = (((C_FIFO_WIDTH+1)%C_MAX_CTRL_FANOUT) == 0) ?
(C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT :
((C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT)+1;
(* syn_keep = "1" *) reg [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr;
(* syn_keep = "1" *) wire [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr_i;
genvar i;
genvar j;
reg M_VALID_i;
reg S_READY_i;
wire push; // FIFO push
wire pop; // FIFO pop
reg areset_d1; // Reset delay register
wire [C_FIFO_WIDTH-1:0] m_axi_mesg_i; // Intermediate SRL data
assign M_VALID = M_VALID_i;
assign S_READY = C_USE_FULL ? S_READY_i : 1'b1;
assign M_MESG = m_axi_mesg_i;
assign push = S_VALID & (C_USE_FULL ? S_READY_i : 1'b1);
assign pop = M_VALID_i & M_READY;
always @(posedge ACLK) begin
areset_d1 <= ARESET;
end
generate
//---------------------------------------------------------------------------
// Create count of number of elements in FIFOs
//---------------------------------------------------------------------------
for (i=0;i<P_NUM_REPS;i=i+1) begin : gen_rep
assign fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] =
push ? fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] + 1 :
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] - 1;
always @(posedge ACLK) begin
if (ARESET)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
{P_FIFO_DEPTH_LOG{1'b1}};
else if (push ^ pop)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i];
end
end
//---------------------------------------------------------------------------
// When FIFO is empty, reset master valid bit. When not empty set valid bit.
// When FIFO is full, reset slave ready bit. When not full set ready bit.
//---------------------------------------------------------------------------
always @(posedge ACLK) begin
if (ARESET) begin
M_VALID_i <= 1'b0;
end else if ((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTEMPTY) && pop && ~push) begin
M_VALID_i <= 1'b0;
end else if (push) begin
M_VALID_i <= 1'b1;
end
end
always @(posedge ACLK) begin
if (ARESET) begin
S_READY_i <= 1'b0;
end else if (areset_d1) begin
S_READY_i <= 1'b1;
end else if (C_USE_FULL &&
((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTFULL) && push && ~pop)) begin
S_READY_i <= 1'b0;
end else if (C_USE_FULL && pop) begin
S_READY_i <= 1'b1;
end
end
//---------------------------------------------------------------------------
// Instantiate SRLs
//---------------------------------------------------------------------------
for (i=0;i<(C_FIFO_WIDTH/C_MAX_CTRL_FANOUT)+((C_FIFO_WIDTH%C_MAX_CTRL_FANOUT)>0);i=i+1) begin : gen_srls
for (j=0;((j<C_MAX_CTRL_FANOUT)&&(i*C_MAX_CTRL_FANOUT+j<C_FIFO_WIDTH));j=j+1) begin : gen_rep
axi_data_fifo_v2_1_ndeep_srl #
(
.C_FAMILY (C_FAMILY),
.C_A_WIDTH (P_FIFO_DEPTH_LOG)
)
srl_nx1
(
.CLK (ACLK),
.A (fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:
P_FIFO_DEPTH_LOG*(i)]),
.CE (push),
.D (S_MESG[i*C_MAX_CTRL_FANOUT+j]),
.Q (m_axi_mesg_i[i*C_MAX_CTRL_FANOUT+j])
);
end
end
endgenerate
endmodule
|
module axi_data_fifo_v2_1_axic_srl_fifo #
(
parameter C_FAMILY = "none", // FPGA Family
parameter integer C_FIFO_WIDTH = 1, // Width of S_MESG/M_MESG.
parameter integer C_MAX_CTRL_FANOUT = 33, // Maximum number of mesg bits
// the control logic can be used
// on before the control logic
// needs to be replicated.
parameter integer C_FIFO_DEPTH_LOG = 2, // Depth of FIFO is 2**C_FIFO_DEPTH_LOG.
// The minimum size fifo generated is 4-deep.
parameter C_USE_FULL = 1 // Prevent overwrite by throttling S_READY.
)
(
input wire ACLK, // Clock
input wire ARESET, // Reset
input wire [C_FIFO_WIDTH-1:0] S_MESG, // Input data
input wire S_VALID, // Input data valid
output wire S_READY, // Input data ready
output wire [C_FIFO_WIDTH-1:0] M_MESG, // Output data
output wire M_VALID, // Output data valid
input wire M_READY // Output data ready
);
localparam P_FIFO_DEPTH_LOG = (C_FIFO_DEPTH_LOG>1) ? C_FIFO_DEPTH_LOG : 2;
localparam P_EMPTY = {P_FIFO_DEPTH_LOG{1'b1}};
localparam P_ALMOSTEMPTY = {P_FIFO_DEPTH_LOG{1'b0}};
localparam P_ALMOSTFULL_TEMP = {P_EMPTY, 1'b0};
localparam P_ALMOSTFULL = P_ALMOSTFULL_TEMP[0+:P_FIFO_DEPTH_LOG];
localparam P_NUM_REPS = (((C_FIFO_WIDTH+1)%C_MAX_CTRL_FANOUT) == 0) ?
(C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT :
((C_FIFO_WIDTH+1)/C_MAX_CTRL_FANOUT)+1;
(* syn_keep = "1" *) reg [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr;
(* syn_keep = "1" *) wire [P_NUM_REPS*P_FIFO_DEPTH_LOG-1:0] fifoaddr_i;
genvar i;
genvar j;
reg M_VALID_i;
reg S_READY_i;
wire push; // FIFO push
wire pop; // FIFO pop
reg areset_d1; // Reset delay register
wire [C_FIFO_WIDTH-1:0] m_axi_mesg_i; // Intermediate SRL data
assign M_VALID = M_VALID_i;
assign S_READY = C_USE_FULL ? S_READY_i : 1'b1;
assign M_MESG = m_axi_mesg_i;
assign push = S_VALID & (C_USE_FULL ? S_READY_i : 1'b1);
assign pop = M_VALID_i & M_READY;
always @(posedge ACLK) begin
areset_d1 <= ARESET;
end
generate
//---------------------------------------------------------------------------
// Create count of number of elements in FIFOs
//---------------------------------------------------------------------------
for (i=0;i<P_NUM_REPS;i=i+1) begin : gen_rep
assign fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] =
push ? fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] + 1 :
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] - 1;
always @(posedge ACLK) begin
if (ARESET)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
{P_FIFO_DEPTH_LOG{1'b1}};
else if (push ^ pop)
fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i] <=
fifoaddr_i[P_FIFO_DEPTH_LOG*(i+1)-1:P_FIFO_DEPTH_LOG*i];
end
end
//---------------------------------------------------------------------------
// When FIFO is empty, reset master valid bit. When not empty set valid bit.
// When FIFO is full, reset slave ready bit. When not full set ready bit.
//---------------------------------------------------------------------------
always @(posedge ACLK) begin
if (ARESET) begin
M_VALID_i <= 1'b0;
end else if ((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTEMPTY) && pop && ~push) begin
M_VALID_i <= 1'b0;
end else if (push) begin
M_VALID_i <= 1'b1;
end
end
always @(posedge ACLK) begin
if (ARESET) begin
S_READY_i <= 1'b0;
end else if (areset_d1) begin
S_READY_i <= 1'b1;
end else if (C_USE_FULL &&
((fifoaddr[P_FIFO_DEPTH_LOG*P_NUM_REPS-1:P_FIFO_DEPTH_LOG*(P_NUM_REPS-1)] ==
P_ALMOSTFULL) && push && ~pop)) begin
S_READY_i <= 1'b0;
end else if (C_USE_FULL && pop) begin
S_READY_i <= 1'b1;
end
end
//---------------------------------------------------------------------------
// Instantiate SRLs
//---------------------------------------------------------------------------
for (i=0;i<(C_FIFO_WIDTH/C_MAX_CTRL_FANOUT)+((C_FIFO_WIDTH%C_MAX_CTRL_FANOUT)>0);i=i+1) begin : gen_srls
for (j=0;((j<C_MAX_CTRL_FANOUT)&&(i*C_MAX_CTRL_FANOUT+j<C_FIFO_WIDTH));j=j+1) begin : gen_rep
axi_data_fifo_v2_1_ndeep_srl #
(
.C_FAMILY (C_FAMILY),
.C_A_WIDTH (P_FIFO_DEPTH_LOG)
)
srl_nx1
(
.CLK (ACLK),
.A (fifoaddr[P_FIFO_DEPTH_LOG*(i+1)-1:
P_FIFO_DEPTH_LOG*(i)]),
.CE (push),
.D (S_MESG[i*C_MAX_CTRL_FANOUT+j]),
.Q (m_axi_mesg_i[i*C_MAX_CTRL_FANOUT+j])
);
end
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_mask_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] M,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar lut_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 3;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] m_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign m_local = {M, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = C_VALUE;
assign m_local = M;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (lut_cnt = 0; lut_cnt < C_NUM_LUT ; lut_cnt = lut_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[lut_cnt] = ( ( a_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( b_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[lut_cnt+1]),
.CIN (carry_local[lut_cnt]),
.S (sel[lut_cnt])
);
end // end for lut_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_mask_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] M,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar lut_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 3;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] m_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign m_local = {M, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = C_VALUE;
assign m_local = M;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (lut_cnt = 0; lut_cnt < C_NUM_LUT ; lut_cnt = lut_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[lut_cnt] = ( ( a_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( b_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[lut_cnt+1]),
.CIN (carry_local[lut_cnt]),
.S (sel[lut_cnt])
);
end // end for lut_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_mask_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] M,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar lut_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 3;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] m_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign m_local = {M, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = C_VALUE;
assign m_local = M;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (lut_cnt = 0; lut_cnt < C_NUM_LUT ; lut_cnt = lut_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[lut_cnt] = ( ( a_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( b_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[lut_cnt+1]),
.CIN (carry_local[lut_cnt]),
.S (sel[lut_cnt])
);
end // end for lut_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 3;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 3;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 3;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 3;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 3;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 3;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_latch_and #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire I,
output wire O
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign O = CIN & ~I;
end else begin : USE_FPGA
wire I_n;
assign I_n = ~I;
AND2B1L and2b1l_inst
(
.O(O),
.DI(CIN),
.SRI(I_n)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_latch_and #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire I,
output wire O
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign O = CIN & ~I;
end else begin : USE_FPGA
wire I_n;
assign I_n = ~I;
AND2B1L and2b1l_inst
(
.O(O),
.DI(CIN),
.SRI(I_n)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_latch_and #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire I,
output wire O
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign O = CIN & ~I;
end else begin : USE_FPGA
wire I_n;
assign I_n = ~I;
AND2B1L and2b1l_inst
(
.O(O),
.DI(CIN),
.SRI(I_n)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_latch_and #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire I,
output wire O
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign O = CIN & ~I;
end else begin : USE_FPGA
wire I_n;
assign I_n = ~I;
AND2B1L and2b1l_inst
(
.O(O),
.DI(CIN),
.SRI(I_n)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_latch_and #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire I,
output wire O
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign O = CIN & ~I;
end else begin : USE_FPGA
wire I_n;
assign I_n = ~I;
AND2B1L and2b1l_inst
(
.O(O),
.DI(CIN),
.SRI(I_n)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_latch_and #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire I,
output wire O
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign O = CIN & ~I;
end else begin : USE_FPGA
wire I_n;
assign I_n = ~I;
AND2B1L and2b1l_inst
(
.O(O),
.DI(CIN),
.SRI(I_n)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_mux #
(
parameter C_FAMILY = "rtl",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_SEL_WIDTH = 4,
// Data width for comparator.
parameter integer C_DATA_WIDTH = 2
// Data width for comparator.
)
(
input wire [C_SEL_WIDTH-1:0] S,
input wire [(2**C_SEL_WIDTH)*C_DATA_WIDTH-1:0] A,
output wire [C_DATA_WIDTH-1:0] O
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" || C_SEL_WIDTH < 3 ) begin : USE_RTL
assign O = A[(S)*C_DATA_WIDTH +: C_DATA_WIDTH];
end else begin : USE_FPGA
wire [C_DATA_WIDTH-1:0] C;
wire [C_DATA_WIDTH-1:0] D;
// Lower half recursively.
generic_baseblocks_v2_1_mux #
(
.C_FAMILY (C_FAMILY),
.C_SEL_WIDTH (C_SEL_WIDTH-1),
.C_DATA_WIDTH (C_DATA_WIDTH)
) mux_c_inst
(
.S (S[C_SEL_WIDTH-2:0]),
.A (A[(2**(C_SEL_WIDTH-1))*C_DATA_WIDTH-1 : 0]),
.O (C)
);
// Upper half recursively.
generic_baseblocks_v2_1_mux #
(
.C_FAMILY (C_FAMILY),
.C_SEL_WIDTH (C_SEL_WIDTH-1),
.C_DATA_WIDTH (C_DATA_WIDTH)
) mux_d_inst
(
.S (S[C_SEL_WIDTH-2:0]),
.A (A[(2**C_SEL_WIDTH)*C_DATA_WIDTH-1 : (2**(C_SEL_WIDTH-1))*C_DATA_WIDTH]),
.O (D)
);
// Generate instantiated generic_baseblocks_v2_1_mux components as required.
for (bit_cnt = 0; bit_cnt < C_DATA_WIDTH ; bit_cnt = bit_cnt + 1) begin : NUM
if ( C_SEL_WIDTH == 4 ) begin : USE_F8
MUXF8 muxf8_inst
(
.I0 (C[bit_cnt]),
.I1 (D[bit_cnt]),
.S (S[C_SEL_WIDTH-1]),
.O (O[bit_cnt])
);
end else if ( C_SEL_WIDTH == 3 ) begin : USE_F7
MUXF7 muxf7_inst
(
.I0 (C[bit_cnt]),
.I1 (D[bit_cnt]),
.S (S[C_SEL_WIDTH-1]),
.O (O[bit_cnt])
);
end // C_SEL_WIDTH
end // end for bit_cnt
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_mux #
(
parameter C_FAMILY = "rtl",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_SEL_WIDTH = 4,
// Data width for comparator.
parameter integer C_DATA_WIDTH = 2
// Data width for comparator.
)
(
input wire [C_SEL_WIDTH-1:0] S,
input wire [(2**C_SEL_WIDTH)*C_DATA_WIDTH-1:0] A,
output wire [C_DATA_WIDTH-1:0] O
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" || C_SEL_WIDTH < 3 ) begin : USE_RTL
assign O = A[(S)*C_DATA_WIDTH +: C_DATA_WIDTH];
end else begin : USE_FPGA
wire [C_DATA_WIDTH-1:0] C;
wire [C_DATA_WIDTH-1:0] D;
// Lower half recursively.
generic_baseblocks_v2_1_mux #
(
.C_FAMILY (C_FAMILY),
.C_SEL_WIDTH (C_SEL_WIDTH-1),
.C_DATA_WIDTH (C_DATA_WIDTH)
) mux_c_inst
(
.S (S[C_SEL_WIDTH-2:0]),
.A (A[(2**(C_SEL_WIDTH-1))*C_DATA_WIDTH-1 : 0]),
.O (C)
);
// Upper half recursively.
generic_baseblocks_v2_1_mux #
(
.C_FAMILY (C_FAMILY),
.C_SEL_WIDTH (C_SEL_WIDTH-1),
.C_DATA_WIDTH (C_DATA_WIDTH)
) mux_d_inst
(
.S (S[C_SEL_WIDTH-2:0]),
.A (A[(2**C_SEL_WIDTH)*C_DATA_WIDTH-1 : (2**(C_SEL_WIDTH-1))*C_DATA_WIDTH]),
.O (D)
);
// Generate instantiated generic_baseblocks_v2_1_mux components as required.
for (bit_cnt = 0; bit_cnt < C_DATA_WIDTH ; bit_cnt = bit_cnt + 1) begin : NUM
if ( C_SEL_WIDTH == 4 ) begin : USE_F8
MUXF8 muxf8_inst
(
.I0 (C[bit_cnt]),
.I1 (D[bit_cnt]),
.S (S[C_SEL_WIDTH-1]),
.O (O[bit_cnt])
);
end else if ( C_SEL_WIDTH == 3 ) begin : USE_F7
MUXF7 muxf7_inst
(
.I0 (C[bit_cnt]),
.I1 (D[bit_cnt]),
.S (S[C_SEL_WIDTH-1]),
.O (O[bit_cnt])
);
end // C_SEL_WIDTH
end // end for bit_cnt
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 6;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = C_VALUE;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 6;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = C_VALUE;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 6;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = C_VALUE;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_static #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter C_VALUE = 4'b0,
// Static value to compare against.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar bit_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 6;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {C_VALUE, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = C_VALUE;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (bit_cnt = 0; bit_cnt < C_NUM_LUT ; bit_cnt = bit_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[bit_cnt] = ( a_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ==
b_local[bit_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[bit_cnt+1]),
.CIN (carry_local[bit_cnt]),
.S (sel[bit_cnt])
);
end // end for bit_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_nto1_mux #
(
parameter integer C_RATIO = 1, // Range: >=1
parameter integer C_SEL_WIDTH = 1, // Range: >=1; recommended: ceil_log2(C_RATIO)
parameter integer C_DATAOUT_WIDTH = 1, // Range: >=1
parameter integer C_ONEHOT = 0 // Values: 0 = binary-encoded (use SEL); 1 = one-hot (use SEL_ONEHOT)
)
(
input wire [C_RATIO-1:0] SEL_ONEHOT, // One-hot generic_baseblocks_v2_1_mux select (only used if C_ONEHOT=1)
input wire [C_SEL_WIDTH-1:0] SEL, // Binary-encoded generic_baseblocks_v2_1_mux select (only used if C_ONEHOT=0)
input wire [C_RATIO*C_DATAOUT_WIDTH-1:0] IN, // Data input array (num_selections x data_width)
output wire [C_DATAOUT_WIDTH-1:0] OUT // Data output vector
);
wire [C_DATAOUT_WIDTH*C_RATIO-1:0] carry;
genvar i;
generate
if (C_ONEHOT == 0) begin : gen_encoded
assign carry[C_DATAOUT_WIDTH-1:0] = {C_DATAOUT_WIDTH{(SEL==0)?1'b1:1'b0}} & IN[C_DATAOUT_WIDTH-1:0];
for (i=1;i<C_RATIO;i=i+1) begin : gen_carrychain_enc
assign carry[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH] =
carry[i*C_DATAOUT_WIDTH-1:(i-1)*C_DATAOUT_WIDTH] |
{C_DATAOUT_WIDTH{(SEL==i)?1'b1:1'b0}} & IN[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH];
end
end else begin : gen_onehot
assign carry[C_DATAOUT_WIDTH-1:0] = {C_DATAOUT_WIDTH{SEL_ONEHOT[0]}} & IN[C_DATAOUT_WIDTH-1:0];
for (i=1;i<C_RATIO;i=i+1) begin : gen_carrychain_hot
assign carry[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH] =
carry[i*C_DATAOUT_WIDTH-1:(i-1)*C_DATAOUT_WIDTH] |
{C_DATAOUT_WIDTH{SEL_ONEHOT[i]}} & IN[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH];
end
end
endgenerate
assign OUT = carry[C_DATAOUT_WIDTH*C_RATIO-1:
C_DATAOUT_WIDTH*(C_RATIO-1)];
endmodule
|
module generic_baseblocks_v2_1_nto1_mux #
(
parameter integer C_RATIO = 1, // Range: >=1
parameter integer C_SEL_WIDTH = 1, // Range: >=1; recommended: ceil_log2(C_RATIO)
parameter integer C_DATAOUT_WIDTH = 1, // Range: >=1
parameter integer C_ONEHOT = 0 // Values: 0 = binary-encoded (use SEL); 1 = one-hot (use SEL_ONEHOT)
)
(
input wire [C_RATIO-1:0] SEL_ONEHOT, // One-hot generic_baseblocks_v2_1_mux select (only used if C_ONEHOT=1)
input wire [C_SEL_WIDTH-1:0] SEL, // Binary-encoded generic_baseblocks_v2_1_mux select (only used if C_ONEHOT=0)
input wire [C_RATIO*C_DATAOUT_WIDTH-1:0] IN, // Data input array (num_selections x data_width)
output wire [C_DATAOUT_WIDTH-1:0] OUT // Data output vector
);
wire [C_DATAOUT_WIDTH*C_RATIO-1:0] carry;
genvar i;
generate
if (C_ONEHOT == 0) begin : gen_encoded
assign carry[C_DATAOUT_WIDTH-1:0] = {C_DATAOUT_WIDTH{(SEL==0)?1'b1:1'b0}} & IN[C_DATAOUT_WIDTH-1:0];
for (i=1;i<C_RATIO;i=i+1) begin : gen_carrychain_enc
assign carry[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH] =
carry[i*C_DATAOUT_WIDTH-1:(i-1)*C_DATAOUT_WIDTH] |
{C_DATAOUT_WIDTH{(SEL==i)?1'b1:1'b0}} & IN[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH];
end
end else begin : gen_onehot
assign carry[C_DATAOUT_WIDTH-1:0] = {C_DATAOUT_WIDTH{SEL_ONEHOT[0]}} & IN[C_DATAOUT_WIDTH-1:0];
for (i=1;i<C_RATIO;i=i+1) begin : gen_carrychain_hot
assign carry[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH] =
carry[i*C_DATAOUT_WIDTH-1:(i-1)*C_DATAOUT_WIDTH] |
{C_DATAOUT_WIDTH{SEL_ONEHOT[i]}} & IN[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH];
end
end
endgenerate
assign OUT = carry[C_DATAOUT_WIDTH*C_RATIO-1:
C_DATAOUT_WIDTH*(C_RATIO-1)];
endmodule
|
module generic_baseblocks_v2_1_nto1_mux #
(
parameter integer C_RATIO = 1, // Range: >=1
parameter integer C_SEL_WIDTH = 1, // Range: >=1; recommended: ceil_log2(C_RATIO)
parameter integer C_DATAOUT_WIDTH = 1, // Range: >=1
parameter integer C_ONEHOT = 0 // Values: 0 = binary-encoded (use SEL); 1 = one-hot (use SEL_ONEHOT)
)
(
input wire [C_RATIO-1:0] SEL_ONEHOT, // One-hot generic_baseblocks_v2_1_mux select (only used if C_ONEHOT=1)
input wire [C_SEL_WIDTH-1:0] SEL, // Binary-encoded generic_baseblocks_v2_1_mux select (only used if C_ONEHOT=0)
input wire [C_RATIO*C_DATAOUT_WIDTH-1:0] IN, // Data input array (num_selections x data_width)
output wire [C_DATAOUT_WIDTH-1:0] OUT // Data output vector
);
wire [C_DATAOUT_WIDTH*C_RATIO-1:0] carry;
genvar i;
generate
if (C_ONEHOT == 0) begin : gen_encoded
assign carry[C_DATAOUT_WIDTH-1:0] = {C_DATAOUT_WIDTH{(SEL==0)?1'b1:1'b0}} & IN[C_DATAOUT_WIDTH-1:0];
for (i=1;i<C_RATIO;i=i+1) begin : gen_carrychain_enc
assign carry[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH] =
carry[i*C_DATAOUT_WIDTH-1:(i-1)*C_DATAOUT_WIDTH] |
{C_DATAOUT_WIDTH{(SEL==i)?1'b1:1'b0}} & IN[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH];
end
end else begin : gen_onehot
assign carry[C_DATAOUT_WIDTH-1:0] = {C_DATAOUT_WIDTH{SEL_ONEHOT[0]}} & IN[C_DATAOUT_WIDTH-1:0];
for (i=1;i<C_RATIO;i=i+1) begin : gen_carrychain_hot
assign carry[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH] =
carry[i*C_DATAOUT_WIDTH-1:(i-1)*C_DATAOUT_WIDTH] |
{C_DATAOUT_WIDTH{SEL_ONEHOT[i]}} & IN[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH];
end
end
endgenerate
assign OUT = carry[C_DATAOUT_WIDTH*C_RATIO-1:
C_DATAOUT_WIDTH*(C_RATIO-1)];
endmodule
|
module generic_baseblocks_v2_1_nto1_mux #
(
parameter integer C_RATIO = 1, // Range: >=1
parameter integer C_SEL_WIDTH = 1, // Range: >=1; recommended: ceil_log2(C_RATIO)
parameter integer C_DATAOUT_WIDTH = 1, // Range: >=1
parameter integer C_ONEHOT = 0 // Values: 0 = binary-encoded (use SEL); 1 = one-hot (use SEL_ONEHOT)
)
(
input wire [C_RATIO-1:0] SEL_ONEHOT, // One-hot generic_baseblocks_v2_1_mux select (only used if C_ONEHOT=1)
input wire [C_SEL_WIDTH-1:0] SEL, // Binary-encoded generic_baseblocks_v2_1_mux select (only used if C_ONEHOT=0)
input wire [C_RATIO*C_DATAOUT_WIDTH-1:0] IN, // Data input array (num_selections x data_width)
output wire [C_DATAOUT_WIDTH-1:0] OUT // Data output vector
);
wire [C_DATAOUT_WIDTH*C_RATIO-1:0] carry;
genvar i;
generate
if (C_ONEHOT == 0) begin : gen_encoded
assign carry[C_DATAOUT_WIDTH-1:0] = {C_DATAOUT_WIDTH{(SEL==0)?1'b1:1'b0}} & IN[C_DATAOUT_WIDTH-1:0];
for (i=1;i<C_RATIO;i=i+1) begin : gen_carrychain_enc
assign carry[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH] =
carry[i*C_DATAOUT_WIDTH-1:(i-1)*C_DATAOUT_WIDTH] |
{C_DATAOUT_WIDTH{(SEL==i)?1'b1:1'b0}} & IN[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH];
end
end else begin : gen_onehot
assign carry[C_DATAOUT_WIDTH-1:0] = {C_DATAOUT_WIDTH{SEL_ONEHOT[0]}} & IN[C_DATAOUT_WIDTH-1:0];
for (i=1;i<C_RATIO;i=i+1) begin : gen_carrychain_hot
assign carry[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH] =
carry[i*C_DATAOUT_WIDTH-1:(i-1)*C_DATAOUT_WIDTH] |
{C_DATAOUT_WIDTH{SEL_ONEHOT[i]}} & IN[(i+1)*C_DATAOUT_WIDTH-1:i*C_DATAOUT_WIDTH];
end
end
endgenerate
assign OUT = carry[C_DATAOUT_WIDTH*C_RATIO-1:
C_DATAOUT_WIDTH*(C_RATIO-1)];
endmodule
|
module generic_baseblocks_v2_1_comparator_mask #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
input wire [C_DATA_WIDTH-1:0] M,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar lut_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 2;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] m_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign m_local = {M, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign m_local = M;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (lut_cnt = 0; lut_cnt < C_NUM_LUT ; lut_cnt = lut_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[lut_cnt] = ( ( a_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( b_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[lut_cnt+1]),
.CIN (carry_local[lut_cnt]),
.S (sel[lut_cnt])
);
end // end for lut_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_mask #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
input wire [C_DATA_WIDTH-1:0] M,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar lut_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 2;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] m_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign m_local = {M, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign m_local = M;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (lut_cnt = 0; lut_cnt < C_NUM_LUT ; lut_cnt = lut_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[lut_cnt] = ( ( a_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( b_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[lut_cnt+1]),
.CIN (carry_local[lut_cnt]),
.S (sel[lut_cnt])
);
end // end for lut_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_mask #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
input wire [C_DATA_WIDTH-1:0] M,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar lut_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 2;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] m_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign m_local = {M, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign m_local = M;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (lut_cnt = 0; lut_cnt < C_NUM_LUT ; lut_cnt = lut_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[lut_cnt] = ( ( a_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( b_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[lut_cnt+1]),
.CIN (carry_local[lut_cnt]),
.S (sel[lut_cnt])
);
end // end for lut_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_and #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire S,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign COUT = CIN & S;
end else begin : USE_FPGA
MUXCY and_inst
(
.O (COUT),
.CI (CIN),
.DI (1'b0),
.S (S)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_and #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire S,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign COUT = CIN & S;
end else begin : USE_FPGA
MUXCY and_inst
(
.O (COUT),
.CI (CIN),
.DI (1'b0),
.S (S)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_and #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire S,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign COUT = CIN & S;
end else begin : USE_FPGA
MUXCY and_inst
(
.O (COUT),
.CI (CIN),
.DI (1'b0),
.S (S)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_or #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire S,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign COUT = CIN | S;
end else begin : USE_FPGA
wire S_n;
assign S_n = ~S;
MUXCY and_inst
(
.O (COUT),
.CI (CIN),
.DI (1'b1),
.S (S_n)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_or #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire S,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign COUT = CIN | S;
end else begin : USE_FPGA
wire S_n;
assign S_n = ~S;
MUXCY and_inst
(
.O (COUT),
.CI (CIN),
.DI (1'b1),
.S (S_n)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_or #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire S,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign COUT = CIN | S;
end else begin : USE_FPGA
wire S_n;
assign S_n = ~S;
MUXCY and_inst
(
.O (COUT),
.CI (CIN),
.DI (1'b1),
.S (S_n)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_or #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire S,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign COUT = CIN | S;
end else begin : USE_FPGA
wire S_n;
assign S_n = ~S;
MUXCY and_inst
(
.O (COUT),
.CI (CIN),
.DI (1'b1),
.S (S_n)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry_latch_or #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire I,
output wire O
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign O = CIN | I;
end else begin : USE_FPGA
OR2L or2l_inst1
(
.O(O),
.DI(CIN),
.SRI(I)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire S,
input wire DI,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign COUT = (CIN & S) | (DI & ~S);
end else begin : USE_FPGA
MUXCY and_inst
(
.O (COUT),
.CI (CIN),
.DI (DI),
.S (S)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire S,
input wire DI,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign COUT = (CIN & S) | (DI & ~S);
end else begin : USE_FPGA
MUXCY and_inst
(
.O (COUT),
.CI (CIN),
.DI (DI),
.S (S)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire S,
input wire DI,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign COUT = (CIN & S) | (DI & ~S);
end else begin : USE_FPGA
MUXCY and_inst
(
.O (COUT),
.CI (CIN),
.DI (DI),
.S (S)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire S,
input wire DI,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign COUT = (CIN & S) | (DI & ~S);
end else begin : USE_FPGA
MUXCY and_inst
(
.O (COUT),
.CI (CIN),
.DI (DI),
.S (S)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_carry #
(
parameter C_FAMILY = "virtex6"
// FPGA Family. Current version: virtex6 or spartan6.
)
(
input wire CIN,
input wire S,
input wire DI,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Instantiate or use RTL code
/////////////////////////////////////////////////////////////////////////////
generate
if ( C_FAMILY == "rtl" ) begin : USE_RTL
assign COUT = (CIN & S) | (DI & ~S);
end else begin : USE_FPGA
MUXCY and_inst
(
.O (COUT),
.CI (CIN),
.DI (DI),
.S (S)
);
end
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_sel_mask #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire S,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
input wire [C_DATA_WIDTH-1:0] M,
input wire [C_DATA_WIDTH-1:0] V,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar lut_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 1;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] m_local;
wire [C_FIX_DATA_WIDTH-1:0] v_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign m_local = {M, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign v_local = {V, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign m_local = M;
assign v_local = V;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (lut_cnt = 0; lut_cnt < C_NUM_LUT ; lut_cnt = lut_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[lut_cnt] = ( ( ( a_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( v_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ) & ( S == 1'b0 ) ) |
( ( ( b_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( v_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ) & ( S == 1'b1 ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[lut_cnt+1]),
.CIN (carry_local[lut_cnt]),
.S (sel[lut_cnt])
);
end // end for lut_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_sel_mask #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire S,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
input wire [C_DATA_WIDTH-1:0] M,
input wire [C_DATA_WIDTH-1:0] V,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar lut_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 1;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] m_local;
wire [C_FIX_DATA_WIDTH-1:0] v_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign m_local = {M, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign v_local = {V, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign m_local = M;
assign v_local = V;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (lut_cnt = 0; lut_cnt < C_NUM_LUT ; lut_cnt = lut_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[lut_cnt] = ( ( ( a_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( v_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ) & ( S == 1'b0 ) ) |
( ( ( b_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( v_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ) & ( S == 1'b1 ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[lut_cnt+1]),
.CIN (carry_local[lut_cnt]),
.S (sel[lut_cnt])
);
end // end for lut_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_sel_mask #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire S,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
input wire [C_DATA_WIDTH-1:0] M,
input wire [C_DATA_WIDTH-1:0] V,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar lut_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 1;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] m_local;
wire [C_FIX_DATA_WIDTH-1:0] v_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign m_local = {M, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign v_local = {V, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign m_local = M;
assign v_local = V;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (lut_cnt = 0; lut_cnt < C_NUM_LUT ; lut_cnt = lut_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[lut_cnt] = ( ( ( a_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( v_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ) & ( S == 1'b0 ) ) |
( ( ( b_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( v_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ) & ( S == 1'b1 ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[lut_cnt+1]),
.CIN (carry_local[lut_cnt]),
.S (sel[lut_cnt])
);
end // end for lut_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_sel_mask #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire S,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
input wire [C_DATA_WIDTH-1:0] M,
input wire [C_DATA_WIDTH-1:0] V,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar lut_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 1;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] m_local;
wire [C_FIX_DATA_WIDTH-1:0] v_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign m_local = {M, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign v_local = {V, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign m_local = M;
assign v_local = V;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (lut_cnt = 0; lut_cnt < C_NUM_LUT ; lut_cnt = lut_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[lut_cnt] = ( ( ( a_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( v_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ) & ( S == 1'b0 ) ) |
( ( ( b_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( v_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ) & ( S == 1'b1 ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[lut_cnt+1]),
.CIN (carry_local[lut_cnt]),
.S (sel[lut_cnt])
);
end // end for lut_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module generic_baseblocks_v2_1_comparator_sel_mask #
(
parameter C_FAMILY = "virtex6",
// FPGA Family. Current version: virtex6 or spartan6.
parameter integer C_DATA_WIDTH = 4
// Data width for comparator.
)
(
input wire CIN,
input wire S,
input wire [C_DATA_WIDTH-1:0] A,
input wire [C_DATA_WIDTH-1:0] B,
input wire [C_DATA_WIDTH-1:0] M,
input wire [C_DATA_WIDTH-1:0] V,
output wire COUT
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
// Generate variable for bit vector.
genvar lut_cnt;
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Bits per LUT for this architecture.
localparam integer C_BITS_PER_LUT = 1;
// Constants for packing levels.
localparam integer C_NUM_LUT = ( C_DATA_WIDTH + C_BITS_PER_LUT - 1 ) / C_BITS_PER_LUT;
//
localparam integer C_FIX_DATA_WIDTH = ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) ? C_NUM_LUT * C_BITS_PER_LUT :
C_DATA_WIDTH;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
wire [C_FIX_DATA_WIDTH-1:0] a_local;
wire [C_FIX_DATA_WIDTH-1:0] b_local;
wire [C_FIX_DATA_WIDTH-1:0] m_local;
wire [C_FIX_DATA_WIDTH-1:0] v_local;
wire [C_NUM_LUT-1:0] sel;
wire [C_NUM_LUT:0] carry_local;
/////////////////////////////////////////////////////////////////////////////
//
/////////////////////////////////////////////////////////////////////////////
generate
// Assign input to local vectors.
assign carry_local[0] = CIN;
// Extend input data to fit.
if ( C_NUM_LUT * C_BITS_PER_LUT > C_DATA_WIDTH ) begin : USE_EXTENDED_DATA
assign a_local = {A, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign b_local = {B, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign m_local = {M, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
assign v_local = {V, {C_NUM_LUT * C_BITS_PER_LUT - C_DATA_WIDTH{1'b0}}};
end else begin : NO_EXTENDED_DATA
assign a_local = A;
assign b_local = B;
assign m_local = M;
assign v_local = V;
end
// Instantiate one generic_baseblocks_v2_1_carry and per level.
for (lut_cnt = 0; lut_cnt < C_NUM_LUT ; lut_cnt = lut_cnt + 1) begin : LUT_LEVEL
// Create the local select signal
assign sel[lut_cnt] = ( ( ( a_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( v_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ) & ( S == 1'b0 ) ) |
( ( ( b_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ==
( v_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] &
m_local[lut_cnt*C_BITS_PER_LUT +: C_BITS_PER_LUT] ) ) & ( S == 1'b1 ) );
// Instantiate each LUT level.
generic_baseblocks_v2_1_carry_and #
(
.C_FAMILY(C_FAMILY)
) compare_inst
(
.COUT (carry_local[lut_cnt+1]),
.CIN (carry_local[lut_cnt]),
.S (sel[lut_cnt])
);
end // end for lut_cnt
// Assign output from local vector.
assign COUT = carry_local[C_NUM_LUT];
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module pipeline_registers
(
input clk,
input reset_n,
input [BIT_WIDTH-1:0] pipe_in,
output reg [BIT_WIDTH-1:0] pipe_out
);
// WARNING!!! THESE PARAMETERS ARE INTENDED TO BE MODIFIED IN A TOP
// LEVEL MODULE. LOCAL CHANGES HERE WILL, MOST LIKELY, BE
// OVERWRITTEN!
parameter
BIT_WIDTH = 10,
NUMBER_OF_STAGES = 5;
// Main generate function for conditional hardware instantiation
generate
genvar i;
// Pass-through case for the odd event that no pipeline stages are
// specified.
if (NUMBER_OF_STAGES == 0) begin
always @ *
pipe_out = pipe_in;
end
// Single flop case for a single stage pipeline
else if (NUMBER_OF_STAGES == 1) begin
always @ (posedge clk or negedge reset_n)
pipe_out <= (!reset_n) ? 0 : pipe_in;
end
// Case for 2 or more pipeline stages
else begin
// Create the necessary regs
reg [BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:0] pipe_gen;
// Create logic for the initial and final pipeline registers
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
pipe_gen[BIT_WIDTH-1:0] <= 0;
pipe_out <= 0;
end
else begin
pipe_gen[BIT_WIDTH-1:0] <= pipe_in;
pipe_out <= pipe_gen[BIT_WIDTH*(NUMBER_OF_STAGES-1)-1:BIT_WIDTH*(NUMBER_OF_STAGES-2)];
end
end
// Create the intermediate pipeline registers if there are 3 or
// more pipeline stages
for (i = 1; i < NUMBER_OF_STAGES-1; i = i + 1) begin : pipeline
always @ (posedge clk or negedge reset_n)
pipe_gen[BIT_WIDTH*(i+1)-1:BIT_WIDTH*i] <= (!reset_n) ? 0 : pipe_gen[BIT_WIDTH*i-1:BIT_WIDTH*(i-1)];
end
end
endgenerate
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module t_div_pipelined();
reg clk, start, reset_n;
reg [7:0] dividend, divisor;
wire data_valid, div_by_zero;
wire [7:0] quotient, quotient_correct;
parameter
BITS = 8;
div_pipelined
#(
.BITS(BITS)
)
div_pipelined
(
.clk(clk),
.reset_n(reset_n),
.dividend(dividend),
.divisor(divisor),
.quotient(quotient),
.div_by_zero(div_by_zero),
// .quotient_correct(quotient_correct),
.start(start),
.data_valid(data_valid)
);
initial begin
#10 reset_n = 0;
#50 reset_n = 1;
#1
clk = 0;
dividend = -1;
divisor = 127;
#1000 $finish;
end
// always
// #20 dividend = dividend + 1;
always begin
#10 divisor = divisor - 1; start = 1;
#10 start = 0;
end
always
#5 clk = ~clk;
endmodule
|
module button_debounce
(
input clk, // clock
input reset_n, // asynchronous reset
input button, // bouncy button
output reg debounce // debounced 1-cycle signal
);
parameter
CLK_FREQUENCY = 66000000,
DEBOUNCE_HZ = 2;
// These parameters are specified such that you can choose any power
// of 2 frequency for a debouncer between 1 Hz and
// CLK_FREQUENCY. Note, that this will throw errors if you choose a
// non power of 2 frequency (i.e. count_value evaluates to some
// number / 3 which isn't interpreted as a logical right shift). I'm
// assuming this will not work for DEBOUNCE_HZ values less than 1,
// however, I'm uncertain of the value of a debouncer for fractional
// hertz button presses.
localparam
COUNT_VALUE = CLK_FREQUENCY / DEBOUNCE_HZ,
WAIT = 0,
FIRE = 1,
COUNT = 2;
reg [1:0] state, next_state;
reg [25:0] count;
always @ (posedge clk or negedge reset_n)
state <= (!reset_n) ? WAIT : next_state;
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
debounce <= 0;
count <= 0;
end
else begin
debounce <= 0;
count <= 0;
case (state)
WAIT: begin
end
FIRE: begin
debounce <= 1;
end
COUNT: begin
count <= count + 1;
end
endcase
end
end
always @ * begin
case (state)
WAIT: next_state = (button) ? FIRE : state;
FIRE: next_state = COUNT;
COUNT: next_state = (count > COUNT_VALUE - 1) ? WAIT : state;
default: next_state = WAIT;
endcase
end
endmodule
|
module button_debounce
(
input clk, // clock
input reset_n, // asynchronous reset
input button, // bouncy button
output reg debounce // debounced 1-cycle signal
);
parameter
CLK_FREQUENCY = 66000000,
DEBOUNCE_HZ = 2;
// These parameters are specified such that you can choose any power
// of 2 frequency for a debouncer between 1 Hz and
// CLK_FREQUENCY. Note, that this will throw errors if you choose a
// non power of 2 frequency (i.e. count_value evaluates to some
// number / 3 which isn't interpreted as a logical right shift). I'm
// assuming this will not work for DEBOUNCE_HZ values less than 1,
// however, I'm uncertain of the value of a debouncer for fractional
// hertz button presses.
localparam
COUNT_VALUE = CLK_FREQUENCY / DEBOUNCE_HZ,
WAIT = 0,
FIRE = 1,
COUNT = 2;
reg [1:0] state, next_state;
reg [25:0] count;
always @ (posedge clk or negedge reset_n)
state <= (!reset_n) ? WAIT : next_state;
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
debounce <= 0;
count <= 0;
end
else begin
debounce <= 0;
count <= 0;
case (state)
WAIT: begin
end
FIRE: begin
debounce <= 1;
end
COUNT: begin
count <= count + 1;
end
endcase
end
end
always @ * begin
case (state)
WAIT: next_state = (button) ? FIRE : state;
FIRE: next_state = COUNT;
COUNT: next_state = (count > COUNT_VALUE - 1) ? WAIT : state;
default: next_state = WAIT;
endcase
end
endmodule
|
module button_debounce
(
input clk, // clock
input reset_n, // asynchronous reset
input button, // bouncy button
output reg debounce // debounced 1-cycle signal
);
parameter
CLK_FREQUENCY = 66000000,
DEBOUNCE_HZ = 2;
// These parameters are specified such that you can choose any power
// of 2 frequency for a debouncer between 1 Hz and
// CLK_FREQUENCY. Note, that this will throw errors if you choose a
// non power of 2 frequency (i.e. count_value evaluates to some
// number / 3 which isn't interpreted as a logical right shift). I'm
// assuming this will not work for DEBOUNCE_HZ values less than 1,
// however, I'm uncertain of the value of a debouncer for fractional
// hertz button presses.
localparam
COUNT_VALUE = CLK_FREQUENCY / DEBOUNCE_HZ,
WAIT = 0,
FIRE = 1,
COUNT = 2;
reg [1:0] state, next_state;
reg [25:0] count;
always @ (posedge clk or negedge reset_n)
state <= (!reset_n) ? WAIT : next_state;
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
debounce <= 0;
count <= 0;
end
else begin
debounce <= 0;
count <= 0;
case (state)
WAIT: begin
end
FIRE: begin
debounce <= 1;
end
COUNT: begin
count <= count + 1;
end
endcase
end
end
always @ * begin
case (state)
WAIT: next_state = (button) ? FIRE : state;
FIRE: next_state = COUNT;
COUNT: next_state = (count > COUNT_VALUE - 1) ? WAIT : state;
default: next_state = WAIT;
endcase
end
endmodule
|
module button_debounce
(
input clk, // clock
input reset_n, // asynchronous reset
input button, // bouncy button
output reg debounce // debounced 1-cycle signal
);
parameter
CLK_FREQUENCY = 66000000,
DEBOUNCE_HZ = 2;
// These parameters are specified such that you can choose any power
// of 2 frequency for a debouncer between 1 Hz and
// CLK_FREQUENCY. Note, that this will throw errors if you choose a
// non power of 2 frequency (i.e. count_value evaluates to some
// number / 3 which isn't interpreted as a logical right shift). I'm
// assuming this will not work for DEBOUNCE_HZ values less than 1,
// however, I'm uncertain of the value of a debouncer for fractional
// hertz button presses.
localparam
COUNT_VALUE = CLK_FREQUENCY / DEBOUNCE_HZ,
WAIT = 0,
FIRE = 1,
COUNT = 2;
reg [1:0] state, next_state;
reg [25:0] count;
always @ (posedge clk or negedge reset_n)
state <= (!reset_n) ? WAIT : next_state;
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
debounce <= 0;
count <= 0;
end
else begin
debounce <= 0;
count <= 0;
case (state)
WAIT: begin
end
FIRE: begin
debounce <= 1;
end
COUNT: begin
count <= count + 1;
end
endcase
end
end
always @ * begin
case (state)
WAIT: next_state = (button) ? FIRE : state;
FIRE: next_state = COUNT;
COUNT: next_state = (count > COUNT_VALUE - 1) ? WAIT : state;
default: next_state = WAIT;
endcase
end
endmodule
|
module button_debounce
(
input clk, // clock
input reset_n, // asynchronous reset
input button, // bouncy button
output reg debounce // debounced 1-cycle signal
);
parameter
CLK_FREQUENCY = 66000000,
DEBOUNCE_HZ = 2;
// These parameters are specified such that you can choose any power
// of 2 frequency for a debouncer between 1 Hz and
// CLK_FREQUENCY. Note, that this will throw errors if you choose a
// non power of 2 frequency (i.e. count_value evaluates to some
// number / 3 which isn't interpreted as a logical right shift). I'm
// assuming this will not work for DEBOUNCE_HZ values less than 1,
// however, I'm uncertain of the value of a debouncer for fractional
// hertz button presses.
localparam
COUNT_VALUE = CLK_FREQUENCY / DEBOUNCE_HZ,
WAIT = 0,
FIRE = 1,
COUNT = 2;
reg [1:0] state, next_state;
reg [25:0] count;
always @ (posedge clk or negedge reset_n)
state <= (!reset_n) ? WAIT : next_state;
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
debounce <= 0;
count <= 0;
end
else begin
debounce <= 0;
count <= 0;
case (state)
WAIT: begin
end
FIRE: begin
debounce <= 1;
end
COUNT: begin
count <= count + 1;
end
endcase
end
end
always @ * begin
case (state)
WAIT: next_state = (button) ? FIRE : state;
FIRE: next_state = COUNT;
COUNT: next_state = (count > COUNT_VALUE - 1) ? WAIT : state;
default: next_state = WAIT;
endcase
end
endmodule
|
module button_debounce
(
input clk, // clock
input reset_n, // asynchronous reset
input button, // bouncy button
output reg debounce // debounced 1-cycle signal
);
parameter
CLK_FREQUENCY = 66000000,
DEBOUNCE_HZ = 2;
// These parameters are specified such that you can choose any power
// of 2 frequency for a debouncer between 1 Hz and
// CLK_FREQUENCY. Note, that this will throw errors if you choose a
// non power of 2 frequency (i.e. count_value evaluates to some
// number / 3 which isn't interpreted as a logical right shift). I'm
// assuming this will not work for DEBOUNCE_HZ values less than 1,
// however, I'm uncertain of the value of a debouncer for fractional
// hertz button presses.
localparam
COUNT_VALUE = CLK_FREQUENCY / DEBOUNCE_HZ,
WAIT = 0,
FIRE = 1,
COUNT = 2;
reg [1:0] state, next_state;
reg [25:0] count;
always @ (posedge clk or negedge reset_n)
state <= (!reset_n) ? WAIT : next_state;
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
debounce <= 0;
count <= 0;
end
else begin
debounce <= 0;
count <= 0;
case (state)
WAIT: begin
end
FIRE: begin
debounce <= 1;
end
COUNT: begin
count <= count + 1;
end
endcase
end
end
always @ * begin
case (state)
WAIT: next_state = (button) ? FIRE : state;
FIRE: next_state = COUNT;
COUNT: next_state = (count > COUNT_VALUE - 1) ? WAIT : state;
default: next_state = WAIT;
endcase
end
endmodule
|
module button_debounce
(
input clk, // clock
input reset_n, // asynchronous reset
input button, // bouncy button
output reg debounce // debounced 1-cycle signal
);
parameter
CLK_FREQUENCY = 66000000,
DEBOUNCE_HZ = 2;
// These parameters are specified such that you can choose any power
// of 2 frequency for a debouncer between 1 Hz and
// CLK_FREQUENCY. Note, that this will throw errors if you choose a
// non power of 2 frequency (i.e. count_value evaluates to some
// number / 3 which isn't interpreted as a logical right shift). I'm
// assuming this will not work for DEBOUNCE_HZ values less than 1,
// however, I'm uncertain of the value of a debouncer for fractional
// hertz button presses.
localparam
COUNT_VALUE = CLK_FREQUENCY / DEBOUNCE_HZ,
WAIT = 0,
FIRE = 1,
COUNT = 2;
reg [1:0] state, next_state;
reg [25:0] count;
always @ (posedge clk or negedge reset_n)
state <= (!reset_n) ? WAIT : next_state;
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
debounce <= 0;
count <= 0;
end
else begin
debounce <= 0;
count <= 0;
case (state)
WAIT: begin
end
FIRE: begin
debounce <= 1;
end
COUNT: begin
count <= count + 1;
end
endcase
end
end
always @ * begin
case (state)
WAIT: next_state = (button) ? FIRE : state;
FIRE: next_state = COUNT;
COUNT: next_state = (count > COUNT_VALUE - 1) ? WAIT : state;
default: next_state = WAIT;
endcase
end
endmodule
|
module that
// instantiates this one.
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
data_valid <= 0;
root <= 0;
end
else begin
data_valid <= start_gen[OUTPUT_BITS-1];
if (root_gen[OUTPUT_BITS*INPUT_BITS-1:OUTPUT_BITS*INPUT_BITS-INPUT_BITS] > root_gen[OUTPUT_BITS*INPUT_BITS-1:OUTPUT_BITS*INPUT_BITS-INPUT_BITS])
root <= root_gen[OUTPUT_BITS*INPUT_BITS-1:OUTPUT_BITS*INPUT_BITS-INPUT_BITS] + 1;
else
root <= root_gen[OUTPUT_BITS*INPUT_BITS-1:OUTPUT_BITS*INPUT_BITS-INPUT_BITS];
end
end
endmodule
|
module that
// instantiates this one.
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
data_valid <= 0;
root <= 0;
end
else begin
data_valid <= start_gen[OUTPUT_BITS-1];
if (root_gen[OUTPUT_BITS*INPUT_BITS-1:OUTPUT_BITS*INPUT_BITS-INPUT_BITS] > root_gen[OUTPUT_BITS*INPUT_BITS-1:OUTPUT_BITS*INPUT_BITS-INPUT_BITS])
root <= root_gen[OUTPUT_BITS*INPUT_BITS-1:OUTPUT_BITS*INPUT_BITS-INPUT_BITS] + 1;
else
root <= root_gen[OUTPUT_BITS*INPUT_BITS-1:OUTPUT_BITS*INPUT_BITS-INPUT_BITS];
end
end
endmodule
|
module that
// instantiates this one.
always @ (posedge clk or negedge reset_n) begin
if (!reset_n) begin
data_valid <= 0;
root <= 0;
end
else begin
data_valid <= start_gen[OUTPUT_BITS-1];
if (root_gen[OUTPUT_BITS*INPUT_BITS-1:OUTPUT_BITS*INPUT_BITS-INPUT_BITS] > root_gen[OUTPUT_BITS*INPUT_BITS-1:OUTPUT_BITS*INPUT_BITS-INPUT_BITS])
root <= root_gen[OUTPUT_BITS*INPUT_BITS-1:OUTPUT_BITS*INPUT_BITS-INPUT_BITS] + 1;
else
root <= root_gen[OUTPUT_BITS*INPUT_BITS-1:OUTPUT_BITS*INPUT_BITS-INPUT_BITS];
end
end
endmodule
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.