app.py

from __future__ import annotations
import os
import gc
import base64
import io
import time
import shutil
import numpy as np
import torch
import cv2
import ezdxf
from ezdxf.addons.text2path import make_paths_from_str
from ezdxf import path
from ezdxf.addons import text2path
from ezdxf.enums import TextEntityAlignment
from ezdxf.fonts.fonts import FontFace, get_font_face
import gradio as gr
from PIL import Image, ImageEnhance
from pathlib import Path
from typing import List, Union
from ultralytics import YOLOWorld, YOLO
from ultralytics.engine.results import Results
from ultralytics.utils.plotting import save_one_box
from transformers import AutoModelForImageSegmentation
from torchvision import transforms
from scalingtestupdated import calculate_scaling_factor
from shapely.geometry import Polygon, Point, MultiPolygon
from scipy.interpolate import splprep, splev
from scipy.ndimage import gaussian_filter1d
from u2net import U2NETP

# ---------------------
# Create a cache folder for models
# ---------------------
CACHE_DIR = os.path.join(os.path.dirname(__file__), ".cache")
os.makedirs(CACHE_DIR, exist_ok=True)

# ---------------------
# Custom Exceptions
# ---------------------
class DrawerNotDetectedError(Exception):
    """Raised when the drawer cannot be detected in the image"""
    pass

class ReferenceBoxNotDetectedError(Exception):
    """Raised when the Reference coin cannot be detected in the image"""
    pass

class BoundaryOverlapError(Exception):
    """Raised when the optional boundary dimensions are too small and overlap with the inner contours."""
    pass

class TextOverlapError(Exception):
    """Raised when the text overlaps with the inner contours (with a margin of 0.75)."""
    pass

# ---------------------
# Global Model Initialization with caching and print statements
# ---------------------
print("Loading YOLOWorld model...")
start_time = time.time()
yolo_model_path = os.path.join(CACHE_DIR, "yolov8x-worldv2.pt")
if not os.path.exists(yolo_model_path):
    print("Caching YOLOWorld model to", yolo_model_path)
    shutil.copy("yolov8x-worldv2.pt", yolo_model_path)
drawer_detector_global = YOLOWorld(yolo_model_path)
drawer_detector_global.set_classes(["box"])
print("YOLOWorld model loaded in {:.2f} seconds".format(time.time() - start_time))

print("Loading YOLO reference model...")
start_time = time.time()
reference_model_path = os.path.join(CACHE_DIR, "coin_det.pt")
if not os.path.exists(reference_model_path):
    print("Caching YOLO reference model to", reference_model_path)
    shutil.copy("coin_det.pt", reference_model_path)
reference_detector_global = YOLO(reference_model_path)
print("YOLO reference model loaded in {:.2f} seconds".format(time.time() - start_time))

print("Loading U²-Net model for reference background removal (U2NETP)...")
start_time = time.time()
u2net_model_path = os.path.join(CACHE_DIR, "u2netp.pth")
if not os.path.exists(u2net_model_path):
    print("Caching U²-Net model to", u2net_model_path)
    shutil.copy("u2netp.pth", u2net_model_path)
u2net_global = U2NETP(3, 1)
u2net_global.load_state_dict(torch.load(u2net_model_path, map_location="cpu"))
device = "cpu"
u2net_global.to(device)
u2net_global.eval()
print("U²-Net model loaded in {:.2f} seconds".format(time.time() - start_time))

print("Loading BiRefNet model...")
start_time = time.time()
birefnet_global = AutoModelForImageSegmentation.from_pretrained(
    "zhengpeng7/BiRefNet", trust_remote_code=True, cache_dir=CACHE_DIR
)
torch.set_float32_matmul_precision("high")
birefnet_global.to(device)
birefnet_global.eval()
print("BiRefNet model loaded in {:.2f} seconds".format(time.time() - start_time))

# Define transform for BiRefNet
transform_image_global = transforms.Compose([
    transforms.Resize((1024, 1024)),
    transforms.ToTensor(),
    transforms.Normalize([0.485, 0.456, 0.406], [0.229, 0.224, 0.225]),
])

# ---------------------
# Model Reload Function (if needed)
# ---------------------
def unload_and_reload_models():
    global drawer_detector_global, reference_detector_global, birefnet_global, u2net_global
    print("Reloading models...")
    start_time = time.time()
    del drawer_detector_global, reference_detector_global, birefnet_global, u2net_global
    gc.collect()
    if torch.cuda.is_available():
        torch.cuda.empty_cache()
    gc.collect()
    new_drawer_detector = YOLOWorld(os.path.join(CACHE_DIR, "yolov8x-worldv2.pt"))
    new_drawer_detector.set_classes(["box"])
    new_reference_detector = YOLO(os.path.join(CACHE_DIR, "coin_det.pt"))
    new_birefnet = AutoModelForImageSegmentation.from_pretrained(
        "zhengpeng7/BiRefNet", trust_remote_code=True, cache_dir=CACHE_DIR
    )
    new_birefnet.to(device)
    new_birefnet.eval()
    new_u2net = U2NETP(3, 1)
    new_u2net.load_state_dict(torch.load(os.path.join(CACHE_DIR, "u2netp.pth"), map_location="cpu"))
    new_u2net.to(device)
    new_u2net.eval()
    drawer_detector_global = new_drawer_detector
    reference_detector_global = new_reference_detector
    birefnet_global = new_birefnet
    u2net_global = new_u2net
    print("Models reloaded in {:.2f} seconds".format(time.time() - start_time))

# ---------------------
# Helper Function: resize_img (defined once)
# ---------------------
def resize_img(img: np.ndarray, resize_dim):
    return np.array(Image.fromarray(img).resize(resize_dim))

# ---------------------
# Other Helper Functions for Detection & Processing
# ---------------------
def yolo_detect(image: Union[str, Path, int, Image.Image, list, tuple, np.ndarray, torch.Tensor]) -> np.ndarray:
    t = time.time()
    results: List[Results] = drawer_detector_global.predict(image)
    if not results or len(results) == 0 or len(results[0].boxes) == 0:
        raise DrawerNotDetectedError("Drawer not detected in the image.")
    print("Drawer detection completed in {:.2f} seconds".format(time.time() - t))
    return save_one_box(results[0].cpu().boxes.xyxy, im=results[0].orig_img, save=False)

def detect_reference_square(img: np.ndarray):
    t = time.time()
    res = reference_detector_global.predict(img, conf=0.3)
    if not res or len(res) == 0 or len(res[0].boxes) == 0:
        raise ReferenceBoxNotDetectedError("Reference Coin not detected in the image.")
    print("Reference detection completed in {:.2f} seconds".format(time.time() - t))
    return (
        save_one_box(res[0].cpu().boxes.xyxy, res[0].orig_img, save=False),
        res[0].cpu().boxes.xyxy[0]
    )

# Use U2NETP for reference background removal.
def remove_bg_u2netp(image: np.ndarray) -> np.ndarray:
    t = time.time()
    image_pil = Image.fromarray(image)
    transform_u2netp = transforms.Compose([
        transforms.Resize((320, 320)),
        transforms.ToTensor(),
        transforms.Normalize([0.485, 0.456, 0.406], [0.229, 0.224, 0.225]),
    ])
    input_tensor = transform_u2netp(image_pil).unsqueeze(0).to("cpu")
    with torch.no_grad():
        outputs = u2net_global(input_tensor)
    pred = outputs[0]
    pred = (pred - pred.min()) / (pred.max() - pred.min() + 1e-8)
    pred_np = pred.squeeze().cpu().numpy()
    pred_np = cv2.resize(pred_np, (image_pil.width, image_pil.height))
    pred_np = (pred_np * 255).astype(np.uint8)
    print("U2NETP background removal completed in {:.2f} seconds".format(time.time() - t))
    return pred_np

# Use BiRefNet for main object background removal.
def remove_bg(image: np.ndarray) -> np.ndarray:
    t = time.time()
    image_pil = Image.fromarray(image)
    input_images = transform_image_global(image_pil).unsqueeze(0).to("cpu")
    with torch.no_grad():
        preds = birefnet_global(input_images)[-1].sigmoid().cpu()
    pred = preds[0].squeeze()
    pred_pil = transforms.ToPILImage()(pred)
    scale_ratio = 1024 / max(image_pil.size)
    scaled_size = (int(image_pil.size[0] * scale_ratio), int(image_pil.size[1] * scale_ratio))
    result = np.array(pred_pil.resize(scaled_size))
    print("BiRefNet background removal completed in {:.2f} seconds".format(time.time() - t))
    return result

def make_square(img: np.ndarray):
    height, width = img.shape[:2]
    max_dim = max(height, width)
    pad_height = (max_dim - height) // 2
    pad_width = (max_dim - width) // 2
    pad_height_extra = max_dim - height - 2 * pad_height
    pad_width_extra = max_dim - width - 2 * pad_width
    if len(img.shape) == 3:
        padded = np.pad(img, ((pad_height, pad_height + pad_height_extra),
                              (pad_width, pad_width + pad_width_extra),
                              (0, 0)), mode="edge")
    else:
        padded = np.pad(img, ((pad_height, pad_height + pad_height_extra),
                              (pad_width, pad_width + pad_width_extra)), mode="edge")
    return padded

def shrink_bbox(image: np.ndarray, shrink_factor: float):
    height, width = image.shape[:2]
    center_x, center_y = width // 2, height // 2
    new_width = int(width * shrink_factor)
    new_height = int(height * shrink_factor)
    x1 = max(center_x - new_width // 2, 0)
    y1 = max(center_y - new_height // 2, 0)
    x2 = min(center_x + new_width // 2, width)
    y2 = min(center_y + new_height // 2, height)
    return image[y1:y2, x1:x2]

def exclude_scaling_box(image: np.ndarray, bbox: np.ndarray, orig_size: tuple, processed_size: tuple, expansion_factor: float = 1.2) -> np.ndarray:
    x_min, y_min, x_max, y_max = map(int, bbox)
    scale_x = processed_size[1] / orig_size[1]
    scale_y = processed_size[0] / orig_size[0]
    x_min = int(x_min * scale_x)
    x_max = int(x_max * scale_x)
    y_min = int(y_min * scale_y)
    y_max = int(y_max * scale_y)
    box_width = x_max - x_min
    box_height = y_max - y_min
    expanded_x_min = max(0, int(x_min - (expansion_factor - 1) * box_width / 2))
    expanded_x_max = min(image.shape[1], int(x_max + (expansion_factor - 1) * box_width / 2))
    expanded_y_min = max(0, int(y_min - (expansion_factor - 1) * box_height / 2))
    expanded_y_max = min(image.shape[0], int(y_max + (expansion_factor - 1) * box_height / 2))
    image[expanded_y_min:expanded_y_max, expanded_x_min:expanded_x_max] = 0
    return image

def resample_contour(contour):
    num_points = 1000
    smoothing_factor = 5
    spline_degree = 3
    if len(contour) < spline_degree + 1:
        raise ValueError(f"Contour must have at least {spline_degree + 1} points, but has {len(contour)} points.")
    contour = contour[:, 0, :]
    tck, _ = splprep([contour[:, 0], contour[:, 1]], s=smoothing_factor)
    u = np.linspace(0, 1, num_points)
    resampled_points = splev(u, tck)
    smoothed_x = gaussian_filter1d(resampled_points[0], sigma=1)
    smoothed_y = gaussian_filter1d(resampled_points[1], sigma=1)
    return np.array([smoothed_x, smoothed_y]).T

# ---------------------
# Add the missing extract_outlines function
# ---------------------
def extract_outlines(binary_image: np.ndarray) -> (np.ndarray, list):
    contours, _ = cv2.findContours(binary_image, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_NONE)
    outline_image = np.zeros_like(binary_image)
    cv2.drawContours(outline_image, contours, -1, (255), thickness=2)
    return cv2.bitwise_not(outline_image), contours

# ---------------------
# Functions for Finger Cut Clearance
# ---------------------
def union_tool_and_circle(tool_polygon: Polygon, center_inch, circle_diameter=1.0):
    radius = circle_diameter / 2.0
    circle_poly = Point(center_inch).buffer(radius, resolution=64)
    union_poly = tool_polygon.union(circle_poly)
    return union_poly

def build_tool_polygon(points_inch):
    return Polygon(points_inch)

def polygon_to_exterior_coords(poly: Polygon):
    if poly.geom_type == "MultiPolygon":
        biggest = max(poly.geoms, key=lambda g: g.area)
        poly = biggest
    if not poly.exterior:
        return []
    return list(poly.exterior.coords)

# def place_finger_cut_adjusted(
#     tool_polygon,
#     points_inch,
#     existing_centers,
#     all_polygons,
#     circle_diameter=1,  # Finger cut circle diameter in inches.
#     min_gap=0.25,         # Minimum clearance (in inches) between the finger cut and adjacent contours.
#     max_attempts=50       # Maximum candidate attempts.
# ):
#     """
#     Attempts to place a finger-cut circle along the tool polygon's contour, biased toward one side
#     (the boundary side) by shifting the candidate center away from the polygon centroid.
#     The candidate circle is merged with the tool polygon via union_tool_and_circle().
#     Debug information is printed to help trace candidate evaluation.

#     :param tool_polygon: Shapely Polygon representing the tool contour.
#     :param points_inch: List of (x, y) points (in inches) along the contour.
#     :param existing_centers: List of already accepted finger cut centers.
#     :param all_polygons: List of all polygons (for overlap checking).
#     :param circle_diameter: Diameter of the finger cut (in inches).
#     :param min_gap: Clearance (in inches) required between the finger cut and any adjacent contour.
#     :param max_attempts: Maximum number of candidate attempts.
#     :return: (updated_polygon, candidate_center) if successful; otherwise, (None, None).
#     """
#     import random
#     from shapely.geometry import Point
#     import numpy as np

#     needed_center_distance = circle_diameter + min_gap
#     radius = circle_diameter / 2.0
#     attempts = 0

#     # Parameter: how far to push the candidate center outward.
#     # Here we set it to half the circle radius, but you can adjust this as needed.
#     outward_offset = radius * 0.1

#     # Compute the centroid of the tool polygon once.
#     polygon_centroid = tool_polygon.centroid

#     # Create a safe version of the polygon via an inward buffer.
#     safe_tool_polygon = tool_polygon.buffer(-min_gap)
#     if safe_tool_polygon.is_empty:
#         safe_tool_polygon = tool_polygon

#     # Shuffle the contour indices for randomness.
#     indices = list(range(len(points_inch)))
#     random.shuffle(indices)

#     for i in indices:
#         if attempts >= max_attempts:
#             break

#         # Base candidate point from the resampled contour:
#         base_x, base_y = points_inch[i]

#         # Try a grid of offsets from this candidate base point.
#         for dx in np.linspace(-0.3, 0.3, 15):
#             for dy in np.linspace(-0.3, 0.3, 15):
#                 # Compute an initial candidate point.
#                 candidate_unshifted = (base_x + dx, base_y + dy)
                
#                 # Compute the outward direction based on the vector from the centroid to candidate.
#                 vec_x = candidate_unshifted[0] - polygon_centroid.x
#                 vec_y = candidate_unshifted[1] - polygon_centroid.y
#                 norm = np.hypot(vec_x, vec_y)
#                 if norm == 0:
#                     continue  # Skip degenerate case.
#                 # Normalize the outward vector.
#                 unit_vec = (vec_x / norm, vec_y / norm)
#                 # Push the candidate center further out so it lies along the boundary.
#                 candidate_center = (candidate_unshifted[0] + unit_vec[0] * outward_offset,
#                                     candidate_unshifted[1] + unit_vec[1] * outward_offset)

#                 # Check that candidate center is not too close to previously accepted centers.
#                 if any(np.hypot(candidate_center[0] - ex, candidate_center[1] - ey) < needed_center_distance 
#                        for ex, ey in existing_centers):
#                     continue

#                 # Create the candidate circle.
#                 candidate_circle = Point(candidate_center).buffer(radius, resolution=64)
                
#                 # Check if the candidate circle is mostly on the boundary:
#                 area_ratio = candidate_circle.intersection(tool_polygon).area / candidate_circle.area
#                 # Debug: Show candidate center and its area ratio.
#                 #print(f"Candidate center: {candidate_center}, area_ratio: {area_ratio:.2f}")
#                 # Accept if at least 70% of the circle's area lies within the tool polygon.
#                 if area_ratio < 0.6:  
#                     continue

#                 # Merge candidate circle with tool polygon using the existing union function.
#                 candidate_union = union_tool_and_circle(tool_polygon, candidate_center, circle_diameter)

#                 # Overlap check: ensure this candidate does not intrude on any other object.
#                 overlap = False
#                 for other_poly in all_polygons:
#                     if other_poly.equals(tool_polygon):
#                         continue
#                     if candidate_union.intersects(other_poly) or candidate_circle.buffer(min_gap).intersects(other_poly):
#                         overlap = True
#                         #print(f"Candidate at {candidate_center} rejected due to overlap.")
#                         break
#                 if overlap:
#                     continue

#                 # Candidate accepted.
#                 print(f"Accepted candidate center: {candidate_center} with area_ratio: {area_ratio:.2f}")
#                 existing_centers.append(candidate_center)
#                 return candidate_union, candidate_center

#         attempts += 1

#     print("Warning: Could not place a finger cut circle meeting all spacing requirements.")
#     return None, None


# def place_finger_cut_adjusted(
#     tool_polygon,
#     points_inch,
#     existing_centers,
#     all_polygons,
#     circle_diameter=1.0,  # Finger cut circle diameter in inches.
#     min_gap=0.25,         # Minimum clearance (in inches) between the finger cut and adjacent contours.
#     max_attempts=50       # Maximum candidate attempts.
# ):
#     """
#     Attempts to place a finger-cut circle along the tool polygon's contour, biased toward one side
#     (the boundary side) by shifting the candidate center away from the polygon centroid.
#     Simplified version that maintains core functionality while using a more streamlined approach.
    
#     :param tool_polygon: Shapely Polygon representing the tool contour.
#     :param points_inch: List of (x, y) points (in inches) along the contour.
#     :param existing_centers: List of already accepted finger cut centers.
#     :param all_polygons: List of all polygons (for overlap checking).
#     :param circle_diameter: Diameter of the finger cut (in inches).
#     :param min_gap: Clearance (in inches) required between the finger cut and any adjacent contour.
#     :param max_attempts: Maximum number of candidate attempts.
#     :return: (updated_polygon, candidate_center) if successful; otherwise, (None, None).
#     """
#     import random
#     import numpy as np
#     from shapely.geometry import Point
    
#     needed_center_distance = circle_diameter + min_gap
#     radius = circle_diameter / 2.0
    
#     # Compute the centroid of the tool polygon once.
#     polygon_centroid = tool_polygon.centroid
    
#     # Parameter: how far to push the candidate center outward.
#     outward_offset = radius * 0.5
    
#     # Try random points along the contour
#     indices = list(range(len(points_inch)))
#     random.shuffle(indices)
    
#     for idx in indices[:max_attempts]:
#         # Get base point from contour
#         base_x, base_y = points_inch[idx]
        
#         # Calculate the outward vector from centroid to point
#         vec_x = base_x - polygon_centroid.x
#         vec_y = base_y - polygon_centroid.y
#         norm = np.hypot(vec_x, vec_y)
        
#         if norm == 0:
#             continue  # Skip if point is at centroid
            
#         # Normalize and calculate shifted candidate center
#         unit_vec = (vec_x / norm, vec_y / norm)
#         candidate_center = (base_x + unit_vec[0] * outward_offset,
#                            base_y + unit_vec[1] * outward_offset)
        
#         # Check distance from existing centers
#         too_close = False
#         for (ex_x, ex_y) in existing_centers:
#             if np.hypot(candidate_center[0] - ex_x, candidate_center[1] - ex_y) < needed_center_distance:
#                 too_close = True
#                 break
                
#         if too_close:
#             continue
            
#         # Create the candidate circle
#         candidate_circle = Point(candidate_center).buffer(radius, resolution=64)
        
#         # Check if circle is mostly on the boundary (at least 60% inside)
#         area_ratio = candidate_circle.intersection(tool_polygon).area / candidate_circle.area
#         if area_ratio < 0.6:
#             continue
            
#         # Merge candidate with tool polygon
#         union_poly = union_tool_and_circle(tool_polygon, candidate_center, circle_diameter)
        
#         # Check for overlaps with other polygons
#         overlap = False
#         for other_poly in all_polygons:
#             if other_poly.equals(tool_polygon):
#                 continue
#             if union_poly.intersects(other_poly) or candidate_circle.buffer(min_gap).intersects(other_poly):
#                 overlap = True
#                 break
                
#         if overlap:
#             continue
            
#         # Candidate accepted
#         print(f"Accepted candidate center: {candidate_center} with area_ratio: {area_ratio:.2f}")
#         existing_centers.append(candidate_center)
#         return union_poly, candidate_center
    
#     print("Warning: Could not place a finger cut circle meeting all spacing requirements.")
#     return None, None


# def place_finger_cut_adjusted(tool_polygon, points_inch, existing_centers, all_polygons, circle_diameter=1.0, min_gap=0.25, max_attempts=100):
#     import random
#     needed_center_distance = circle_diameter + min_gap
#     radius = circle_diameter / 2.0
#     for _ in range(max_attempts):
#         idx = random.randint(0, len(points_inch) - 1)
#         cx, cy = points_inch[idx]
#         too_close = False
#         for (ex_x, ex_y) in existing_centers:
#             if np.hypot(cx - ex_x, cy - ex_y) < needed_center_distance:
#                 too_close = True
#                 break
#         if too_close:
#             continue
#         circle_poly = Point((cx, cy)).buffer(radius, resolution=64)
#         union_poly = tool_polygon.union(circle_poly)
#         overlap_with_others = False
#         too_close_to_others = False
#         for poly in all_polygons:
#             if union_poly.intersects(poly):
#                 overlap_with_others = True
#                 break
#             if circle_poly.buffer(min_gap).intersects(poly):
#                 too_close_to_others = True
#                 break
#         if overlap_with_others or too_close_to_others:
#             continue
#         existing_centers.append((cx, cy))
#         return union_poly, (cx, cy)
#     print("Warning: Could not place a finger cut circle meeting all spacing requirements.")
#     return None, None

# def place_finger_cut_adjusted(tool_polygon, points_inch, existing_centers, all_polygons, 2nd best
#                               circle_diameter=1.0, min_gap=0.25, max_attempts=30):
#     import random
#     from shapely.geometry import Point

#     # Analyze bounding box
#     bounds = tool_polygon.bounds  # (minx, miny, maxx, maxy)
#     width = bounds[2] - bounds[0]
#     height = bounds[3] - bounds[1]
#     min_dim = min(width, height)

#     # Adjust circle diameter based on tool size
#     scale_factor = min(1.0, min_dim / 2.0)  # Adjust this factor to control size sensitivity
#     adjusted_diameter = circle_diameter * scale_factor
#     radius = adjusted_diameter / 2.0
#     needed_center_distance = adjusted_diameter + min_gap

#     for _ in range(max_attempts):
#         idx = random.randint(0, len(points_inch) - 1)
#         cx, cy = points_inch[idx]

#         # Check distance from existing centers
#         if any(np.hypot(cx - ex_x, cy - ex_y) < needed_center_distance for ex_x, ex_y in existing_centers):
#             continue

#         circle_poly = Point((cx, cy)).buffer(radius, resolution=64)
#         union_poly = tool_polygon.union(circle_poly)

#         overlap_with_others = any(union_poly.intersects(poly) for poly in all_polygons)
#         too_close_to_others = any(circle_poly.buffer(min_gap).intersects(poly) for poly in all_polygons)

#         if overlap_with_others or too_close_to_others:
#             continue

#         existing_centers.append((cx, cy))
#         return union_poly, (cx, cy)

#     print("Warning: Could not place a finger cut circle meeting all spacing requirements.")
#     return None, None


def place_finger_cut_adjusted(tool_polygon, points_inch, existing_centers, all_polygons, circle_diameter=1.0, min_gap=0.25, max_attempts=30): #1st best
    needed_center_distance = circle_diameter + min_gap
    radius = circle_diameter / 2.0
    import random
    for _ in range(max_attempts):
        idx = random.randint(0, len(points_inch) - 1)
        cx, cy = points_inch[idx]

        # Check if this point is too close to an existing center
        too_close = any(np.hypot(cx - ex_x, cy - ex_y) < needed_center_distance for ex_x, ex_y in existing_centers)
        if too_close:
            continue

        # Create the finger cut circle and try adding it to the tool
        circle_poly = Point((cx, cy)).buffer(radius, resolution=64)
        union_poly = tool_polygon.union(circle_poly)

        # Check for overlap and spacing with other tools
        overlap_with_others = False
        too_close_to_others = False

        for poly in all_polygons:
            if poly.equals(tool_polygon):
                continue  # Skip comparing the tool to itself

            if union_poly.intersects(poly):
                overlap_with_others = True
                break

            if circle_poly.buffer(min_gap).intersects(poly):
                too_close_to_others = True
                break

        if overlap_with_others or too_close_to_others:
            continue

        existing_centers.append((cx, cy))
        return union_poly, (cx, cy)

    print("Warning: Could not place a finger cut circle meeting all spacing requirements.")
    return None, None


# def place_finger_cut_adjusted(tool_polygon, points_inch, existing_centers, all_polygons,
#                               circle_diameter=1.0, min_gap=0.25, max_attempts=30):
#     fallback_diameters = [circle_diameter, 0.75, 0.5, 0.4]  # Try these in order

#     for fallback_d in fallback_diameters:
#         radius = fallback_d / 2.0
#         needed_center_distance = fallback_d + min_gap

#         for _ in range(max_attempts):
#             idx = random.randint(0, len(points_inch) - 1)
#             cx, cy = points_inch[idx]

#             # Check distance from existing centers
#             too_close = any(np.hypot(cx - ex_x, cy - ex_y) < needed_center_distance
#                             for ex_x, ex_y in existing_centers)
#             if too_close:
#                 continue

#             # Create and check the finger cut circle
#             circle_poly = Point((cx, cy)).buffer(radius, resolution=64)
#             union_poly = tool_polygon.union(circle_poly)

#             if not union_poly.is_valid:
#                 continue  # Skip invalid geometry

#             # Check against all other polygons strictly
#             overlap = False
#             for poly in all_polygons:
#                 if poly.equals(tool_polygon):
#                     continue

#                 # Shrink slightly to avoid even edge contact
#                 if union_poly.intersects(poly.buffer(-1e-3)):
#                     overlap = True
#                     break
#                 if circle_poly.buffer(min_gap).intersects(poly):
#                     overlap = True
#                     break

#             if overlap:
#                 continue

#             # Final sanity check
#             for poly in all_polygons:
#                 if poly.equals(tool_polygon):
#                     continue
#                 if union_poly.intersects(poly):
#                     print("Overlap slipped through. Rejecting.")
#                     overlap = True
#                     break

#             if overlap:
#                 continue

#             existing_centers.append((cx, cy))
#             return union_poly, (cx, cy)

#     # If we get here, all attempts failed — still try placing smallest fallback
#     print("Warning: Could not place cleanly. Forcing smallest fallback.")
#     smallest_radius = fallback_diameters[-1] / 2.0
#     for _ in range(100):
#         idx = random.randint(0, len(points_inch) - 1)
#         cx, cy = points_inch[idx]
#         circle_poly = Point((cx, cy)).buffer(smallest_radius, resolution=64)
#         union_poly = tool_polygon.union(circle_poly)
#         if union_poly.is_valid:
#             existing_centers.append((cx, cy))
#             return union_poly, (cx, cy)

#     # Absolute fallback — return original tool without finger cut
#     print("Failed to place even smallest fallback. No cutout added.")
#     return tool_polygon, None


# def place_finger_cut_adjusted(tool_polygon, points_inch, existing_centers, all_polygons, circle_diameter=1.0, min_gap=0.25, max_attempts=30):
#     import random
#     import numpy as np
#     from shapely.geometry import Point, Polygon

#     needed_center_distance = circle_diameter + min_gap
#     radius = circle_diameter / 2.0
#     for _ in range(max_attempts):
#         idx = random.randint(0, len(points_inch) - 1)
#         cx, cy = points_inch[idx]
#         # Check against existing centers
#         too_close = any(np.hypot(cx - ex_x, cy - ex_y) < needed_center_distance for (ex_x, ex_y) in existing_centers)
#         if too_close:
#             continue
#         circle_poly = Point((cx, cy)).buffer(radius, resolution=64)
#         # Ensure circle intersects the tool to form a valid cut
#         if not circle_poly.intersects(tool_polygon):
#             continue
#         # Check proximity to other polygons
#         if any(circle_poly.buffer(min_gap).intersects(poly) for poly in all_polygons):
#             continue
#         # Subtract circle from tool and check for overlaps
#         difference_poly = tool_polygon.difference(circle_poly)
#         if any(difference_poly.intersects(poly) for poly in all_polygons):
#             continue
#         existing_centers.append((cx, cy))
#         return difference_poly, (cx, cy)
#     print("Warning: Could not place a finger cut circle meeting all spacing requirements.")
#     return None, None


# ---------------------
# DXF Spline and Boundary Functions
# ---------------------
def save_dxf_spline(inflated_contours, scaling_factor, height, finger_clearance=False):
    degree = 3
    closed = True
    doc = ezdxf.new(units=0)
    doc.units = ezdxf.units.IN
    doc.header["$INSUNITS"] = ezdxf.units.IN
    msp = doc.modelspace()
    finger_cut_centers = []
    final_polygons_inch = []
    for contour in inflated_contours:
        try:
            resampled_contour = resample_contour(contour)
            points_inch = [(x * scaling_factor, (height - y) * scaling_factor) for x, y in resampled_contour]
            if len(points_inch) < 3:
                continue
            if np.linalg.norm(np.array(points_inch[0]) - np.array(points_inch[-1])) > 1e-2:
                points_inch.append(points_inch[0])
            tool_polygon = build_tool_polygon(points_inch)
            if finger_clearance:
                union_poly, center = place_finger_cut_adjusted(tool_polygon, points_inch, finger_cut_centers, final_polygons_inch, circle_diameter=1.0, min_gap=0.25, max_attempts=100)
                if union_poly is not None:
                    tool_polygon = union_poly
            exterior_coords = polygon_to_exterior_coords(tool_polygon)
            if len(exterior_coords) < 3:
                continue
            msp.add_spline(exterior_coords, degree=degree, dxfattribs={"layer": "TOOLS"})
            final_polygons_inch.append(tool_polygon)
        except ValueError as e:
            print(f"Skipping contour: {e}")
    return doc, final_polygons_inch

def add_rectangular_boundary(doc, polygons_inch, boundary_length, boundary_width, offset_unit, annotation_text="", image_height_in=None, image_width_in=None):
    msp = doc.modelspace()
    # Convert from mm if necessary
    if offset_unit.lower() == "mm":
        if boundary_length < 50:
            boundary_length = boundary_length * 25.4
        if boundary_width < 50:
            boundary_width = boundary_width * 25.4
        boundary_length_in = boundary_length / 25.4
        boundary_width_in = boundary_width / 25.4
    else:
        boundary_length_in = boundary_length
        boundary_width_in = boundary_width

    # Compute bounding box of inner contours
    min_x = float("inf")
    min_y = float("inf")
    max_x = -float("inf")
    max_y = -float("inf")
    for poly in polygons_inch:
        b = poly.bounds
        min_x = min(min_x, b[0])
        min_y = min(min_y, b[1])
        max_x = max(max_x, b[2])
        max_y = max(max_y, b[3])
    if min_x == float("inf"):
        print("No tool polygons found, skipping boundary.")
        return None

    # Compute inner bounding box dimensions
    inner_width = max_x - min_x
    inner_length = max_y - min_y

    # Set clearance margins
    clearance_side = 0.25  # left/right clearance
    clearance_tb = 0.25    # top/bottom clearance
    if annotation_text.strip():
        clearance_tb = 0.75

    # Calculate center of inner contours
    center_x = (min_x + max_x) / 2
    center_y = (min_y + max_y) / 2

    # Draw rectangle centered at (center_x, center_y)
    left = center_x - boundary_width_in / 2
    right = center_x + boundary_width_in / 2
    bottom = center_y - boundary_length_in / 2
    top = center_y + boundary_length_in / 2

    rect_coords = [(left, bottom), (right, bottom), (right, top), (left, top), (left, bottom)]
    from shapely.geometry import Polygon as ShapelyPolygon
    boundary_polygon = ShapelyPolygon(rect_coords)
    msp.add_lwpolyline(rect_coords, close=True, dxfattribs={"layer": "BOUNDARY"})
    
    text_top = boundary_polygon.bounds[1] + 1
    too_small = boundary_width_in < inner_width + 2 * clearance_side or boundary_length_in < inner_length + 2 * clearance_tb
    if too_small:
        raise BoundaryOverlapError("Error: The specified boundary dimensions are too small and overlap with the inner contours. Please provide larger values.")
    if annotation_text.strip() and text_top > min_y - 0.75:
        raise TextOverlapError("Error: The text is too close to the inner contours. Please increase boundary length.")
    return boundary_polygon

def draw_polygons_inch(polygons_inch, image_rgb, scaling_factor, image_height, color=(0,0,255), thickness=2):
    for poly in polygons_inch:
        if poly.geom_type == "MultiPolygon":
            for subpoly in poly.geoms:
                draw_single_polygon(subpoly, image_rgb, scaling_factor, image_height, color, thickness)
        else:
            draw_single_polygon(poly, image_rgb, scaling_factor, image_height, color, thickness)

def draw_single_polygon(poly, image_rgb, scaling_factor, image_height, color=(0,0,255), thickness=2):
    ext = list(poly.exterior.coords)
    if len(ext) < 3:
        return
    pts_px = []
    for (x_in, y_in) in ext:
        px = int(x_in / scaling_factor)
        py = int(image_height - (y_in / scaling_factor))
        pts_px.append([px, py])
    pts_px = np.array(pts_px, dtype=np.int32)
    cv2.polylines(image_rgb, [pts_px], isClosed=True, color=color, thickness=thickness, lineType=cv2.LINE_AA)

# ---------------------
# Main Predict Function with Finger Cut Clearance, Boundary Box, Annotation and Sharpness Enhancement
# ---------------------
def predict(
    image: Union[str, bytes, np.ndarray],
    offset_value: float,
    offset_unit: str,         # "mm" or "inches"
    finger_clearance: str,    # "Yes" or "No"
    add_boundary: str,        # "Yes" or "No"
    boundary_length: float,
    boundary_width: float,
    annotation_text: str
):
    overall_start = time.time()
    # Convert image to NumPy array if needed
    if isinstance(image, str):
        if os.path.exists(image):
            image = np.array(Image.open(image).convert("RGB"))
        else:
            try:
                image = np.array(Image.open(io.BytesIO(base64.b64decode(image))).convert("RGB"))
            except Exception:
                raise ValueError("Invalid base64 image data")

    # Apply brightness and sharpness enhancement
    if isinstance(image, np.ndarray):
        pil_image = Image.fromarray(image)
        enhanced_image = ImageEnhance.Sharpness(pil_image).enhance(1.5)
        image = np.array(enhanced_image)

    # ---------------------
    # 1) Detect the drawer with YOLOWorld (or use original image if not detected)
    # ---------------------
    drawer_detected = True
    try:
        t = time.time()
        drawer_img = yolo_detect(image)
        print("Drawer detection completed in {:.2f} seconds".format(time.time() - t))
    except DrawerNotDetectedError as e:
        print(f"Drawer not detected: {e}, using original image.")
        drawer_detected = False
        drawer_img = cv2.cvtColor(image, cv2.COLOR_RGB2BGR)

    # Process the image (either cropped drawer or original)
    t = time.time()
    if drawer_detected:
        # For detected drawers: shrink and square
        shrunked_img = make_square(shrink_bbox(drawer_img, 0.90))
    else:
        # For non-drawer images: keep original dimensions
        shrunked_img = drawer_img  # Already in BGR format from above
    del drawer_img
    gc.collect()
    print("Image processing completed in {:.2f} seconds".format(time.time() - t))

    # ---------------------
    # 2) Detect the reference box with YOLO (now works on either cropped or original image)
    # ---------------------
    try:
        t = time.time()
        reference_obj_img, scaling_box_coords = detect_reference_square(shrunked_img)
        print("Reference coin detection completed in {:.2f} seconds".format(time.time() - t))
    except ReferenceBoxNotDetectedError as e:
        return None, None, None, None, f"Error: {str(e)}"

    # ---------------------
    # 3) Remove background of the reference box to compute scaling factor
    # ---------------------
    t = time.time()
    reference_obj_img = make_square(reference_obj_img)
    reference_square_mask = remove_bg_u2netp(reference_obj_img)
    reference_square_mask= resize_img(reference_square_mask,(reference_obj_img.shape[1],reference_obj_img.shape[0]))
    print("Reference image processing completed in {:.2f} seconds".format(time.time() - t))

    t = time.time()
    try:
        cv2.imwrite("mask.jpg", cv2.cvtColor(reference_obj_img, cv2.COLOR_RGB2GRAY))
        scaling_factor = calculate_scaling_factor(
            target_image=reference_square_mask,
            reference_obj_size_mm=0.955,
            feature_detector="ORB",
        )
    except ZeroDivisionError:
        scaling_factor = None
        print("Error calculating scaling factor: Division by zero")
    except Exception as e:
        scaling_factor = None
        print(f"Error calculating scaling factor: {e}")

    if scaling_factor is None or scaling_factor == 0:
        scaling_factor = 0.7
        print("Using default scaling factor of 0.7 due to calculation error")
    gc.collect()
    print("Scaling factor determined: {}".format(scaling_factor))

    # ---------------------
    # 4) Optional boundary dimension checks (now without size limits)
    # ---------------------
    if add_boundary.lower() == "yes":
        if offset_unit.lower() == "mm":
            if boundary_length < 50:
                boundary_length = boundary_length * 25.4
            if boundary_width < 50:
                boundary_width = boundary_width * 25.4
            boundary_length_in = boundary_length / 25.4
            boundary_width_in = boundary_width / 25.4
        else:
            boundary_length_in = boundary_length
            boundary_width_in = boundary_width
            
    # ---------------------
    # 5) Remove background from the shrunked drawer image (main objects)
    # ---------------------
    if offset_unit.lower() == "mm":
        if offset_value < 1:
            offset_value = offset_value * 25.4
        offset_inches = offset_value / 25.4
    else:
        offset_inches = offset_value

    t = time.time()
    orig_size = shrunked_img.shape[:2]
    objects_mask = remove_bg(shrunked_img)
    processed_size = objects_mask.shape[:2]

    objects_mask = exclude_scaling_box(objects_mask, scaling_box_coords, orig_size, processed_size, expansion_factor=1.2)
    objects_mask = resize_img(objects_mask, (shrunked_img.shape[1], shrunked_img.shape[0]))
    del scaling_box_coords
    gc.collect()
    print("Object masking completed in {:.2f} seconds".format(time.time() - t))

    # Dilate mask by offset_pixels
    t = time.time()
    offset_pixels = (offset_inches / scaling_factor) * 2 + 1 if scaling_factor != 0 else 1
    dilated_mask = cv2.dilate(objects_mask, np.ones((int(offset_pixels), int(offset_pixels)), np.uint8))
    del objects_mask
    gc.collect()
    print("Mask dilation completed in {:.2f} seconds".format(time.time() - t))

    Image.fromarray(dilated_mask).save("./outputs/scaled_mask_new.jpg")

    # ---------------------
    # 6) Extract outlines from the mask and convert them to DXF splines
    # ---------------------
    t = time.time()
    outlines, contours = extract_outlines(dilated_mask)
    print("Outline extraction completed in {:.2f} seconds".format(time.time() - t))

    output_img = shrunked_img.copy()
    del shrunked_img
    gc.collect()

    t = time.time()
    use_finger_clearance = True if finger_clearance.lower() == "yes" else False
    doc, final_polygons_inch = save_dxf_spline(
        contours, scaling_factor, processed_size[0], finger_clearance=use_finger_clearance
    )
    del contours
    gc.collect()
    print("DXF generation completed in {:.2f} seconds".format(time.time() - t))

    # ---------------------
    # Compute bounding box of inner tool contours BEFORE adding optional boundary
    # ---------------------
    inner_min_x = float("inf")
    inner_min_y = float("inf")
    inner_max_x = -float("inf")
    inner_max_y = -float("inf")
    for poly in final_polygons_inch:
        b = poly.bounds
        inner_min_x = min(inner_min_x, b[0])
        inner_min_y = min(inner_min_y, b[1])
        inner_max_x = max(inner_max_x, b[2])
        inner_max_y = max(inner_max_y, b[3])

    # ---------------------
    # 7) Add optional rectangular boundary
    # ---------------------
    boundary_polygon = None
    if add_boundary.lower() == "yes":
        boundary_polygon = add_rectangular_boundary(
            doc,
            final_polygons_inch,
            boundary_length,
            boundary_width,
            offset_unit,
            annotation_text,
            image_height_in=output_img.shape[0] * scaling_factor,
            image_width_in=output_img.shape[1] * scaling_factor
        )
        if boundary_polygon is not None:
            final_polygons_inch.append(boundary_polygon)

    # ---------------------
    # 8) Add annotation text (if provided) in the DXF
    # ---------------------
    msp = doc.modelspace()
    
    if annotation_text.strip():
        text_x = ((inner_min_x + inner_max_x) / 2.0) - (int(len(annotation_text.strip()) / 2.0))
        text_height_dxf = 0.75  
        text_y_dxf = boundary_polygon.bounds[1] + 0.25
        font = get_font_face("Arial")
        paths = text2path.make_paths_from_str(
            annotation_text.strip().upper(),
            font=font,  # Use default font
            size=text_height_dxf,
            align=TextEntityAlignment.LEFT
        )
        
        # Create a translation matrix
        translation = ezdxf.math.Matrix44.translate(text_x, text_y_dxf, 0)
        # Apply the translation to each path
        translated_paths = [p.transform(translation) for p in paths]
    
        # Render the paths as splines and polylines
        path.render_splines_and_polylines(
            msp, 
            translated_paths, 
            dxfattribs={"layer": "ANNOTATION", "color": 7}
        )

    # Save the DXF
    dxf_filepath = os.path.join("./outputs", "out.dxf")
    doc.saveas(dxf_filepath)

    # ---------------------
    # 9) For the preview images, draw the polygons and place text similarly
    # ---------------------
    draw_polygons_inch(final_polygons_inch, output_img, scaling_factor, processed_size[0], color=(0, 0, 255), thickness=2)
    new_outlines = np.ones_like(output_img) * 255
    draw_polygons_inch(final_polygons_inch, new_outlines, scaling_factor, processed_size[0], color=(0, 0, 255), thickness=2)

    if annotation_text.strip():
        text_height_cv = 0.75
        text_x_img = int(((inner_min_x + inner_max_x) / 2.0) / scaling_factor)
        text_y_in = boundary_polygon.bounds[1] + 0.25
        text_y_img = int(processed_size[0] - (text_y_in / scaling_factor))
        org = (text_x_img - int(len(annotation_text.strip()) * 6), text_y_img)

        # Method 2: Use two different thicknesses
        # Draw thicker outline
        temp_img = np.zeros_like(output_img)

        cv2.putText(
            temp_img,
            annotation_text.strip().upper(),
            org,
            cv2.FONT_HERSHEY_SIMPLEX,
            2,
            (0, 0, 255),  # Red color
            4,  # Thicker outline
            cv2.LINE_AA
        )

        cv2.putText(
            temp_img,
            annotation_text.strip().upper(),
            org,
            cv2.FONT_HERSHEY_SIMPLEX,
            2,
            (0, 0, 0),  # Black to create hole
            2,  # Thinner inner part
            cv2.LINE_AA
        )

        outline_mask = cv2.cvtColor(temp_img, cv2.COLOR_BGR2GRAY)
        _, outline_mask = cv2.threshold(outline_mask, 1, 255, cv2.THRESH_BINARY)

        output_img[outline_mask > 0] = temp_img[outline_mask > 0]
                
        cv2.putText(
            new_outlines,
            annotation_text.strip().upper(),
            org,
            cv2.FONT_HERSHEY_SIMPLEX,
            2,
            (0, 0, 255),  # Red color
            4,  # Thicker outline
            cv2.LINE_AA
        )
        
        cv2.putText(
            new_outlines,
            annotation_text.strip().upper(),
            org,
            cv2.FONT_HERSHEY_SIMPLEX,
            2,
            (255, 255, 255),  # Inner text in white
            2,  # Thinner inner part
            cv2.LINE_AA
        )

    outlines_color = cv2.cvtColor(new_outlines, cv2.COLOR_BGR2RGB)
    print("Total prediction time: {:.2f} seconds".format(time.time() - overall_start))

    return (
        cv2.cvtColor(output_img, cv2.COLOR_BGR2RGB),
        outlines_color,
        dxf_filepath,
        dilated_mask,
        str(scaling_factor)
    )

# ---------------------
# Gradio Interface
# ---------------------
if __name__ == "__main__":
    os.makedirs("./outputs", exist_ok=True)
    def gradio_predict(img, offset, offset_unit, finger_clearance, add_boundary, boundary_length, boundary_width, annotation_text):
        try:
            return predict(img, offset, offset_unit, finger_clearance, add_boundary, boundary_length, boundary_width, annotation_text)
        except Exception as e:
            return None, None, None, None, f"Error: {str(e)}"
    iface = gr.Interface(
        fn=gradio_predict,
        inputs=[
            gr.Image(label="Input Image"),
            gr.Number(label="Offset value for Mask", value=0.075),
            gr.Dropdown(label="Offset Unit", choices=["mm", "inches"], value="inches"),
            gr.Dropdown(label="Add Finger Clearance?", choices=["Yes", "No"], value="No"),
            gr.Dropdown(label="Add Rectangular Boundary?", choices=["Yes", "No"], value="No"),
            gr.Number(label="Boundary Length", value=300.0, precision=2),
            gr.Number(label="Boundary Width", value=200.0, precision=2),
            gr.Textbox(label="Annotation (max 20 chars)", max_length=20, placeholder="Type up to 20 characters")
        ],
        outputs=[
            gr.Image(label="Output Image"),
            gr.Image(label="Outlines of Objects"),
            gr.File(label="DXF file"),
            gr.Image(label="Mask"),
            gr.Textbox(label="Scaling Factor (inches/pixel)")
        ],
        examples=[
            ["./Test20.jpg", 0.075, "inches", "No", "No", 300.0, 200.0, "MyTool"],
            ["./Test21.jpg", 0.075, "inches", "Yes", "Yes", 300.0, 200.0, "Tool2"]
        ]
    )
    iface.launch(share=True)