File size: 22,890 Bytes
5aefcf4 |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 |
Ticket Name: TDA2SA: tda2xx uboot can't load kernel image
Query Text:
Part Number: TDA2SA Hi, I am working on my custom board tda2xx and try booting from emmc. I refer to http://processors.wiki.ti.com/index.php?title=Processor_SDK_Linux_Automotive_Software_Developers_Guide#Using_eMMC_Boot and do all should be setting. After switch boot mode to emmc boot, I got the error message that can't get the kernel image: Booting from eMMC ... Wrong Image Format for bootm command ERROR: can't get kernel image! => There some problem I had found: 1. It can't boot uboot (no logs) often. I often reset power many times to get success boot uboot. 2. My custom board PMICs are not connected to SOC and it can't fix right now. 3. The bootpart have changed to 0:2 not 1:2 I had set in uboot. Is it right? Please help to boot from emmc. Thanks. Terry
Responses:
I use VSDK3.07. attach boot log 7206.uboot.txt U-Boot SPL 2016.05 (Oct 21 2019 - 21:04:35)
DRA752-GP ES2.0
Trying to boot from MMC2_2
reading single-stage-boot.dtb
spl_load_image_fat_os: error reading image single-stage-boot.dtb, err - -1
reading u-boot.img
reading u-boot.img
U-Boot 2016.05 (Oct 21 2019 - 21:04:35 +0800)
CPU : DRA752-GP ES2.0
Board: D3 TDA2x
I2C: ready
DRAM: i2c_read (addr phase): pads on bus probably not configured (status=0x10)
2 GiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
i2c_write: pads on bus probably not configured (status=0x10)
tps65903x: could not set LDO1 voltage.
i2c_write: pads on bus probably not configured (status=0x10)
tps65903x: could not set LDO1 voltage.
Card did not respond to voltage select!
** Bad device mmc 0 **
Using default environment
i2c_write: pads on bus probably not configured (status=0x10)
i2c_write: pads on bus probably not configured (status=0x10)
tps65903x: could not turn CLK32KGAUDIO on: err = 2
i2c_read (addr phase): pads on bus probably not configured (status=0x10)
Unable to read Board-ID
i2c_read (addr phase): pads on bus probably not configured (status=0x10)
i2c_read (addr phase): pads on bus probably not configured (status=0x10)
Unable to read Baseboard-ID
i2c_probe: pads on bus probably not configured (status=0x10)
Unable to read Expansion-ID
SCSI: 0 device not found
ERROR: scsi device not found
at drivers/block/disk-uclass.c:43/scsi_init()
Net: <ethaddr> not set. Validating first E-fuse MAC
i2c_read (addr phase): pads on bus probably not configured (status=0x10)
i2c_read (addr phase): pads on bus probably not configured (status=0x10)
Could not get PHY for cpsw: addr 2
cpsw
Hit any key to stop autoboot: 0
i2c_write: pads on bus probably not configured (status=0x10)
tps65903x: could not set LDO1 voltage.
Card did not respond to voltage select!
i2c_write: pads on bus probably not configured (status=0x10)
tps65903x: could not set LDO1 voltage.
Card did not respond to voltage select!
i2c_write: pads on bus probably not configured (status=0x10)
tps65903x: could not set LDO1 voltage.
Card did not respond to voltage select!
Tuning failed, dropping HS200 mode.
dropping DDR52 mode.
switch to partitions #0, OK
mmc1(part 0) is current device
Tuning failed, dropping HS200 mode.
dropping DDR52 mode.
mmc - MMC sub system
Usage:
mmc info - display info of the current MMC device
mmc read addr blk# cnt
mmc write addr blk# cnt
mmc erase blk# cnt
mmc rescan
mmc part - lists available partition on current mmc device
mmc dev [dev] [part] - show or set current mmc device [partition]
mmc list - lists available devices
mmc hwpartition [args...] - does hardware partitioning
arguments (sizes in 512-byte blocks):
[user [enh start cnt] [wrrel {on|off}]] - sets user data area attributes
[gp1|gp2|gp3|gp4 cnt [enh] [wrrel {on|off}]] - general purpose partition
[check|set|complete] - mode, complete set partitioning completed
WARNING: Partitioning is a write-once setting once it is set to complete.
Power cycling is required to initialize partitions after set to complete.
mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode
- Set the BOOT_BUS_WIDTH field of the specified device
mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>
- Change sizes of boot and RPMB partitions of specified device
mmc partconf dev boot_ack boot_partition partition_access
- Change the bits of the PARTITION_CONFIG field of the specified device
mmc rst-function dev value
- Change the RST_n_FUNCTION field of the specified device
WARNING: This is a write-once field and 0 / 1 / 2 are the only valid values.
mmc setdsr <value> - set DSR register value
mmc - MMC sub system
Usage:
mmc info - display info of the current MMC device
mmc read addr blk# cnt
mmc write addr blk# cnt
mmc erase blk# cnt
mmc rescan
mmc part - lists available partition on current mmc device
mmc dev [dev] [part] - show or set current mmc device [partition]
mmc list - lists available devices
mmc hwpartition [args...] - does hardware partitioning
arguments (sizes in 512-byte blocks):
[user [enh start cnt] [wrrel {on|off}]] - sets user data area attributes
[gp1|gp2|gp3|gp4 cnt [enh] [wrrel {on|off}]] - general purpose partition
[check|set|complete] - mode, complete set partitioning completed
WARNING: Partitioning is a write-once setting once it is set to complete.
Power cycling is required to initialize partitions after set to complete.
mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode
- Set the BOOT_BUS_WIDTH field of the specified device
mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>
- Change sizes of boot and RPMB partitions of specified device
mmc partconf dev boot_ack boot_partition partition_access
- Change the bits of the PARTITION_CONFIG field of the specified device
mmc rst-function dev value
- Change the RST_n_FUNCTION field of the specified device
WARNING: This is a write-once field and 0 / 1 / 2 are the only valid values.
mmc setdsr <value> - set DSR register value
Booting from eMMC ...
Wrong Image Format for bootm command
ERROR: can't get kernel image!
=> printenv
arch=arm
args_fit=setenv bootargs console=${console}
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
baseboard_name=unknown_baseboard
baseboard_rev=unknown
baudrate=115200
board=tda2x
board_findfdt=if test $board_name = tda2eco; then setenv fdtfile d3-tda2ex-fpd4ch.dtb; fi;if test $board_name = tda2eco_tda2x; then setenv fdtfile d3-tda2x-fpd4ch.dtb; fi;if test $baseboard_name = tda2xde_fpd8ch; then setenv fdtfile d3-tda2x-fpd8ch.dtb; fi;if test $fdtfile = undefined; then setenv fdtfile d3-tda2eco-som.dtb; fi;
board_name=unknown_board
board_rev=unknown
boot_fdt=try
boot_fit=0
boot_os=0
boot_part=9
bootargs=androidboot.serialno=0400e0174aba8802
bootcmd=if test ${dofastboot} -eq 1; then echo Boot fastboot requested, resetting dofastboot ...;setenv dofastboot 0; saveenv;echo Booting into fastboot ...; fastboot 0; fi;if test ${boot_fit} -eq 1; then run update_to_fit;fi;run findfdt; run envboot; run mmcboot;run emmc_android_boot;
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootfile=zImage
bootm_size=0x10000000
bootpart=0:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyO0,115200n8
cpu=armv7
dofastboot=0
emmc_android_boot=setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv mmcdev 1; setenv fdt_part 3; setenv boot_part 9; if test $reboot_image = recovery; then setenv boot_part 8; setenv reboot_image boot; saveenv; fi;setenv machid fe6; mmc dev $mmcdev; mmc rescan; part start mmc ${mmcdev} ${fdt_part} fdt_start; part size mmc ${mmcdev} ${fdt_part} fdt_size; part start mmc ${mmcdev} ${boot_part} boot_start; part size mmc ${mmcdev} ${boot_part} boot_size; mmc read ${fdtaddr} ${fdt_start} ${fdt_size}; mmc read ${loadaddr} ${boot_start} ${boot_size}; echo Booting from eMMC ...; bootm $loadaddr $loadaddr $fdtaddr;
envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadbootscript; then run bootscript;else if run loadbootenv; then echo Loaded env from ${bootenvfile};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;fi;fi;
eth1addr=90:9a:77:8d:af:a5
ethact=cpsw
ethaddr=90:9a:77:8d:af:a4
eval_bootargs=setenv bootargs androidboot.serialno=${serial#}
expansion_name=unknown_expansion
fdt_addr_r=0x88000000
fdt_part=3
fdtaddr=0x88000000
fdtfile=d3-tda2eco-som.dtb
findfdt=if test $board_name = omap5_uevm; then setenv fdtfile omap5-uevm.dtb; fi; if test $board_name = dra7xx; then setenv fdtfile dra7-evm.dtb; fi;if test $board_name = dra72x-revc; then setenv fdtfile dra72-evm-revc.dtb; fi;if test $board_name = dra72x; then setenv fdtfile dra72-evm.dtb; fi;if test $board_name = dra71x; then setenv fdtfile dra71-evm.dtb; fi;if test $board_name = dra76x; then setenv fdtfile dra76-evm.dtb; fi;if test $board_name = beagle_x15; then setenv fdtfile am57xx-beagle-x15.dtb; fi;if test $board_name = beagle_x15_revb1; then setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;if test $board_name = am57xx_evm; then setenv fdtfile am57xx-evm.dtb; fi;if test $board_name = am57xx_evm_reva3; then setenv fdtfile am57xx-evm-reva3.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = no; then setenv fdtfile am572x-idk.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = osd101t2045; then setenv fdtfile am572x-idk-lcd-osd.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = osd101t2587; then setenv fdtfile am572x-idk-lcd-osd101t2587.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = no; then setenv fdtfile am571x-idk.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = osd101t2045; then setenv fdtfile am571x-idk-lcd-osd.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = osd101t2587; then setenv fdtfile am571x-idk-lcd-osd101t2587.dtb; fi;if test $board_findfdt != undefined; then run board_findfdt; fi;if test $fdtfile = undefined; then echo WARNING: Could not determine device tree to use; fi;
finduuid=part uuid mmc ${bootpart} uuid
fit_bootfile=fitImage.itb
fit_loadaddr=0x88000000
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
kernel_addr_r=0x82000000
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
loadfit=run args_fit; bootm ${loadaddr}#${fdtfile};
loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
machid=fe6
mmcboot=if mmc dev ${mmcdev}; then setenv devtype mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadimage; then run loadfdt; echo Booting from mmc${mmcdev} ...; run args_mmc; bootz ${loadaddr} - ${fdtaddr}; fi; fi; fi;
mmcdev=1
mmcloados=run args_mmc; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
netargs=setenv bootargs console=${console} ${optargs} root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp
netboot=echo Booting from network ...; setenv autoload no; dhcp; run netloadimage; run netloadfdt; run netargs; bootz ${loadaddr} - ${fdtaddr}
netloadfdt=tftp ${fdtaddr} ${fdtfile}
netloadimage=tftp ${loadaddr} ${bootfile}
nfsopts=nolock
partitions=uuid_disk=${uuid_gpt_disk};name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rdaddr=0x88080000
reboot_image=boot
rootpath=/export/rootfs
scriptaddr=0x80000000
serial#=0400e0174aba8802
soc=omap5
static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off
stderr=serial
stdin=serial
stdout=serial
update_to_fit=setenv loadaddr ${fit_loadaddr}; setenv bootfile ${fit_bootfile}
usbtty=cdc_acm
vendor=d3
ver=U-Boot 2016.05 (Oct 21 2019 - 21:04:35 +0800)
vram=16M
Environment size: 6097/65532 bytes
=>
Hi, Before I answer the question. Have you got the Processor SDK Linux booting from the emmc device? Have you ported the u-boot for your custom board? Did you modify the boot command for the right device that is enumerated as emmc? I see lot of i2c errors, mmc errors, etc. You need to fix them first before going ahead. Regards, Nikhil D
Hi Nikhil D, Anser your question below: Have you got the Processor SDK Linux booting from the emmc device? NO. I use PROCESSOR-SDK-VISION 3.07 and it can boot linux from SD card on my custom board after some code modified. We want to boot from emmc so that would be a product. I refer to some threads : https://e2e.ti.com/support/processors/f/791/t/802605?tisearch=e2e-sitesearch&keymatch=tda2%2525252525252520linux%2525252525252520emmc https://e2e.ti.com/support/processors/f/791/t/795035?tisearch=e2e-sitesearch&keymatch=dra7-evm-infoadas.dtb but not success yet. Have you ported the u-boot for your custom board? NO. For SD card can boot the linux, I don't look into u-boot yet. Did you modify the boot command for the right device that is enumerated as emmc? I had modify boot command.I think it is right. Can you help to check it? uenv.txt: fdtfile=d3-tda2x-fpd8ch.dtb args_mmc=part uuid mmc 1:2 uuid; setenv bootargs "console=ttyO0,115200n8 vram=16M root=PARTUUID=${uuid} rw rootwait rootfs=/dev/mmcblk1p2 ip=none mem=512M cma=64M" mmc: => mmc list OMAP SD/MMC: 0 OMAP SD/MMC: 1 (eMMC) I see lot of i2c errors, mmc errors, etc. You need to fix them first before going ahead. Some i2c error is to read the id, some error is to control PMIC. I believe the PMIC may lead some problem because PMICs are not connected to SOC. If PMIC would be a issue, how to skip that? When use SD card boot mode, kernel will boot up and mount the emmc partition. It can read/write emmc. I will check i2c error message and fix it. Regards, Terry
Hi, Can you please ensure that the two partitions can be enumerated using the u-boot Then, stop at the u-boot prompt, change the environment variables and try to do a boot from emmc. Regards, Nikhil D
Hi Nikhil D, 1. How to ensure the two partitions can be enumerated ? When I use the "mmc part" command at uboot prompt, it shows: => mmc part Partition Map for MMC device 1 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 63 144522 00000000-01 0c Boot 2 144585 7405965 00000000-02 83 => Then I change to SD boot, and in linux use fdisk -l root@dra7xx-evm:~# fdisk -l Disk /dev/mmcblk0: 7867 MB, 7867465728 bytes 4 heads, 16 sectors/track, 240096 cylinders Units = cylinders of 64 * 512 = 32768 bytes Device Boot Start End Blocks Id System /dev/mmcblk0p1 * 33 8224 262144 c Win95 FAT32 (LBA) Partition 1 does not end on cylinder boundary /dev/mmcblk0p2 8225 240096 7419904 83 Linux Partition 2 does not end on cylinder boundary Disk /dev/mmcblk1: 3867 MB, 3867148288 bytes 255 heads, 63 sectors/track, 470 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/mmcblk1p1 * 1 9 72261 c Win95 FAT32 (LBA) /dev/mmcblk1p2 10 470 3702982+ 83 Linux Disk /dev/mmcblk1boot1: 2 MB, 2097152 bytes 4 heads, 16 sectors/track, 64 cylinders Units = cylinders of 64 * 512 = 32768 bytes Disk /dev/mmcblk1boot1 doesn't contain a valid partition table Disk /dev/mmcblk1boot0: 2 MB, 2097152 bytes 4 heads, 16 sectors/track, 64 cylinders Units = cylinders of 64 * 512 = 32768 bytes Disk /dev/mmcblk1boot0 doesn't contain a valid partition table root@dra7xx-evm:~# /dev/mmcblk1 is emmc. The number displyed in uboot and in linux are not the same. 2. I reset uboot env variables follow: => env default -a ## Resetting to default environment => setenv bootpart 1:2 => setenv mmcdev 1 => saveenv Saving Environment to FAT... i2c_write: pads on bus probably not configured (status=0x10) tps65903x: could not set LDO1 voltage. Card did not respond to voltage select! ** Bad device mmc 0 ** => It still fail to load kernel. Regards, Terry
Hi Terry, mmc list shows the different mmc devices. mmc dev N selects the device to be used. Nikhil D
Hi Nikhil D, mmc commands show below: => mmc list OMAP SD/MMC: 0 OMAP SD/MMC: 1 (eMMC) => mmc dev 1 Tuning failed, dropping HS200 mode. dropping DDR52 mode. switch to partitions #0, OK mmc1(part 0) is current device => mmc part Partition Map for MMC device 1 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 63 144522 00000000-01 0c Boot 2 144585 7405965 00000000-02 83 => Full boot log attached 4774.uboot.txt
U-Boot SPL 2016.05 (Oct 23 2019 - 18:08:17)
DRA752-GP ES2.0
Trying to boot from MMC2_2
reading single-stage-boot.dtb
spl_load_image_fat_os: error reading image single-stage-boot.dtb, err - -1
reading u-boot.img
reading u-boot.img
U-Boot 2016.05 (Oct 23 2019 - 18:08:17 +0800)
CPU : DRA752-GP ES2.0
Board: D3 TDA2x
I2C: ready
DRAM: i2c_read (addr phase): pads on bus probably not configured (status=0x10)
2 GiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
i2c_write: pads on bus probably not configured (status=0x10)
tps65903x: could not set LDO1 voltage.
i2c_write: pads on bus probably not configured (status=0x10)
tps65903x: could not set LDO1 voltage.
Card did not respond to voltage select!
** Bad device mmc 0 **
Using default environment
i2c_write: pads on bus probably not configured (status=0x10)
i2c_write: pads on bus probably not configured (status=0x10)
tps65903x: could not turn CLK32KGAUDIO on: err = 2
i2c_read (addr phase): pads on bus probably not configured (status=0x10)
Unable to read Board-ID
i2c_read (addr phase): pads on bus probably not configured (status=0x10)
i2c_read (addr phase): pads on bus probably not configured (status=0x10)
Unable to read Baseboard-ID
i2c_probe: pads on bus probably not configured (status=0x10)
Unable to read Expansion-ID
SCSI: 0 device not found
ERROR: scsi device not found
at drivers/block/disk-uclass.c:43/scsi_init()
Net: <ethaddr> not set. Validating first E-fuse MAC
i2c_read (addr phase): pads on bus probably not configured (status=0x10)
i2c_read (addr phase): pads on bus probably not configured (status=0x10)
Could not get PHY for cpsw: addr 2
cpsw
Hit any key to stop autoboot: 0
i2c_write: pads on bus probably not configured (status=0x10)
tps65903x: could not set LDO1 voltage.
Card did not respond to voltage select!
i2c_write: pads on bus probably not configured (status=0x10)
tps65903x: could not set LDO1 voltage.
Card did not respond to voltage select!
i2c_write: pads on bus probably not configured (status=0x10)
tps65903x: could not set LDO1 voltage.
Card did not respond to voltage select!
Tuning failed, dropping HS200 mode.
dropping DDR52 mode.
switch to partitions #0, OK
mmc1(part 0) is current device
Tuning failed, dropping HS200 mode.
dropping DDR52 mode.
mmc - MMC sub system
Usage:
mmc info - display info of the current MMC device
mmc read addr blk# cnt
mmc write addr blk# cnt
mmc erase blk# cnt
mmc rescan
mmc part - lists available partition on current mmc device
mmc dev [dev] [part] - show or set current mmc device [partition]
mmc list - lists available devices
mmc hwpartition [args...] - does hardware partitioning
arguments (sizes in 512-byte blocks):
[user [enh start cnt] [wrrel {on|off}]] - sets user data area attributes
[gp1|gp2|gp3|gp4 cnt [enh] [wrrel {on|off}]] - general purpose partition
[check|set|complete] - mode, complete set partitioning completed
WARNING: Partitioning is a write-once setting once it is set to complete.
Power cycling is required to initialize partitions after set to complete.
mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode
- Set the BOOT_BUS_WIDTH field of the specified device
mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>
- Change sizes of boot and RPMB partitions of specified device
mmc partconf dev boot_ack boot_partition partition_access
- Change the bits of the PARTITION_CONFIG field of the specified device
mmc rst-function dev value
- Change the RST_n_FUNCTION field of the specified device
WARNING: This is a write-once field and 0 / 1 / 2 are the only valid values.
mmc setdsr <value> - set DSR register value
mmc - MMC sub system
Usage:
mmc info - display info of the current MMC device
mmc read addr blk# cnt
mmc write addr blk# cnt
mmc erase blk# cnt
mmc rescan
mmc part - lists available partition on current mmc device
mmc dev [dev] [part] - show or set current mmc device [partition]
mmc list - lists available devices
mmc hwpartition [args...] - does hardware partitioning
arguments (sizes in 512-byte blocks):
[user [enh start cnt] [wrrel {on|off}]] - sets user data area attributes
[gp1|gp2|gp3|gp4 cnt [enh] [wrrel {on|off}]] - general purpose partition
[check|set|complete] - mode, complete set partitioning completed
WARNING: Partitioning is a write-once setting once it is set to complete.
Power cycling is required to initialize partitions after set to complete.
mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode
- Set the BOOT_BUS_WIDTH field of the specified device
mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>
- Change sizes of boot and RPMB partitions of specified device
mmc partconf dev boot_ack boot_partition partition_access
- Change the bits of the PARTITION_CONFIG field of the specified device
mmc rst-function dev value
- Change the RST_n_FUNCTION field of the specified device
WARNING: This is a write-once field and 0 / 1 / 2 are the only valid values.
mmc setdsr <value> - set DSR register value
Booting from eMMC ...
Wrong Image Format for bootm command
ERROR: can't get kernel image!
=> mmc list
OMAP SD/MMC: 0
OMAP SD/MMC: 1 (eMMC)
=> mmc dev 1
Tuning failed, dropping HS200 mode.
dropping DDR52 mode.
switch to partitions #0, OK
mmc1(part 0) is current device
=> mmc part
Partition Map for MMC device 1 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 63 144522 00000000-01 0c Boot
2 144585 7405965 00000000-02 83
=>
Hi Nikhil D, Can you advise where might be the cause? I don't resolve it yet. Thank you. Terry
One option I can suggest you is to debug the whole cmd execution all the way. Use printenv bootcmd It will display a list of commands that u-boot shell would run. Follow the links and understand what exactly is happening. You can manually run commands in the variables, e.g. run args_mmc At every step, check if the command did everything right. Focus especially on commands involving mmc This will help you root cause the issue to exact command failure. Regards, NIkhil D
|