data2/text/range/20001-25000/878943.txt

Ticket Name: Compiler/TDA2EVM5777: Linux/TDA2: libdrm test

Query Text:
Part Number: TDA2EVM5777 Tool/software: TI C/C++ Compiler Hi, i download the github.com/.../modeset-double-buffered.c modify modeset_draw function to remove frame copy and only call drmModeSetCrtc i use sdk( Processor SDK Linux Automotive 3.04.00.03) to cross compile measurement run time as below , about 16.8ms i found kernel drm_mode_setcrtc spend about 14ms How can i improve and reduce time ? Regards, Erwin. drivers/gpu/drm/drm_crtc.c [ 26.131660] lock,find 2 us [ 26.136438] mode vail 3 us [ 26.139154] connector 1 us [ 26.156455] set 14587 us => mutex lock [ 26.158998] free 3 us [ 26.161276] gpio 3 us,total: 14599 us [ 26.165037] lock,find 3 us [ 26.199348] lock,find 2 us [ 26.202064] mode vail 4 us [ 26.204864] connector 1 us [ 26.223116] set 15539 us => mutex lock [ 26.225681] free 3 us [ 26.227962] gpio 2 us,total: 15551 us modeset-double-buffered.c /*
 * modeset - DRM Double-Buffered Modesetting Example
 *
 * Written 2012 by David Herrmann <[email protected]>
 * Dedicated to the Public Domain.
 */

/*
 * DRM Double-Buffered Modesetting Howto
 * This example extends the modeset.c howto and introduces double-buffering.
 * When drawing a new frame into a framebuffer, we should always draw into an
 * unused buffer and not into the front buffer. If we draw into the front
 * buffer, we might have drawn half the frame when the display-controller starts
 * scanning out the next frame. Hence, we see flickering on the screen.
 * The technique to avoid this is called double-buffering. We have two
 * framebuffers, the front buffer which is currently used for scanout and a
 * back-buffer that is used for drawing operations. When a frame is done, we
 * simply swap both buffers.
 * Swapping does not mean copying data, instead, only the pointers to the
 * buffers are swapped.
 *
 * Please read modeset.c before reading this file as most of the functions stay
 * the same. Only the differences are highlighted here.
 * Also note that triple-buffering or any other number of buffers can be easily
 * implemented by following the scheme here. However, in this example we limit
 * the number of buffers to 2 so it is easier to follow.
 */

#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mman.h>
#include <time.h>
#include <unistd.h>
#include <xf86drm.h>
#include <xf86drmMode.h>

struct modeset_buf;
struct modeset_dev;
static int modeset_find_crtc(int fd, drmModeRes *res, drmModeConnector *conn,
			     struct modeset_dev *dev);
static int modeset_create_fb(int fd, struct modeset_buf *buf);
static void modeset_destroy_fb(int fd, struct modeset_buf *buf);
static int modeset_setup_dev(int fd, drmModeRes *res, drmModeConnector *conn,
			     struct modeset_dev *dev);
static int modeset_open(int *out, const char *node);
static int modeset_prepare(int fd);
static void modeset_draw(int fd);
static void modeset_cleanup(int fd);

/*
 * modeset_open() stays the same as before.
 */

static int fb_id_left=0;
static int fb_id_right=0;

static int modeset_open(int *out, const char *node)
{
	int fd, ret;
	uint64_t has_dumb;

	fd = open(node, O_RDWR | O_CLOEXEC);
	if (fd < 0) {
		ret = -errno;
		fprintf(stderr, "cannot open '%s': %m\n", node);
		return ret;
	}

	if (drmGetCap(fd, DRM_CAP_DUMB_BUFFER, &has_dumb) < 0 ||
	    !has_dumb) {
		fprintf(stderr, "drm device '%s' does not support dumb buffers\n",
			node);
		close(fd);
		return -EOPNOTSUPP;
	}

	*out = fd;
	return 0;
}

/*
 * Previously, we used the modeset_dev objects to hold buffer informations, too.
 * Technically, we could have split them but avoided this to make the
 * example simpler.
 * However, in this example we need 2 buffers. One back buffer and one front
 * buffer. So we introduce a new structure modeset_buf which contains everything
 * related to a single buffer. Each device now gets an array of two of these
 * buffers.
 * Each buffer consists of width, height, stride, size, handle, map and fb-id.
 * They have the same meaning as before.
 *
 * Each device also gets a new integer field: front_buf. This field contains the
 * index of the buffer that is currently used as front buffer / scanout buffer.
 * In our example it can be 0 or 1. We flip it by using XOR:
 *   dev->front_buf ^= dev->front_buf
 *
 * Everything else stays the same.
 */

struct modeset_buf {
	uint32_t width;
	uint32_t height;
	uint32_t stride;
	uint32_t size;
	uint32_t handle;
	uint8_t *map;
	uint32_t fb;
};

struct modeset_dev {
	struct modeset_dev *next;

	unsigned int front_buf;
	struct modeset_buf bufs[2];

	drmModeModeInfo mode;
	uint32_t conn;
	uint32_t crtc;
	drmModeCrtc *saved_crtc;
};

static struct modeset_dev *modeset_list = NULL;
static struct modeset_dev *modeset_hdmi = NULL;

/*
 * modeset_prepare() stays the same.
 */

static int modeset_prepare(int fd)
{
	drmModeRes *res;
	drmModeConnector *conn;
	unsigned int i;
	struct modeset_dev *dev;
	int ret;

	/* retrieve resources */
	res = drmModeGetResources(fd);
	if (!res) {
		fprintf(stderr, "cannot retrieve DRM resources (%d): %m\n",
			errno);
		return -errno;
	}

	/* iterate all connectors */
	for (i = 0; i < res->count_connectors; ++i) {
		/* get information for each connector */
		conn = drmModeGetConnector(fd, res->connectors[i]);
		if (!conn) {
			fprintf(stderr, "cannot retrieve DRM connector %u:%u (%d): %m\n",
				i, res->connectors[i], errno);
			continue;
		}

		/* create a device structure */
		dev = malloc(sizeof(*dev));
		memset(dev, 0, sizeof(*dev));
		dev->conn = conn->connector_id;

		/* call helper function to prepare this connector */
		ret = modeset_setup_dev(fd, res, conn, dev);
		if (ret) {
			if (ret != -ENOENT) {
				errno = -ret;
				fprintf(stderr, "cannot setup device for connector %u:%u (%d): %m\n",
					i, res->connectors[i], errno);
			}
			free(dev);
			drmModeFreeConnector(conn);
			continue;
		}

		/* free connector data and link device into global list */
		drmModeFreeConnector(conn);
		dev->next = modeset_list;
		modeset_list = dev;

		if(!modeset_hdmi){
			printf("debug set modeset_hdmi ..\n");
			modeset_hdmi = modeset_list;
		}
	}

	/* free resources again */
	drmModeFreeResources(res);
	return 0;
}

/*
 * modeset_setup_dev() sets up all resources for a single device. It mostly
 * stays the same, but one thing changes: We allocate two framebuffers instead
 * of one. That is, we call modeset_create_fb() twice.
 * We also copy the width/height information into both framebuffers so
 * modeset_create_fb() can use them without requiring a pointer to modeset_dev.
 */

static int modeset_setup_dev(int fd, drmModeRes *res, drmModeConnector *conn,
			     struct modeset_dev *dev)
{
	int ret;

	/* check if a monitor is connected */
	if (conn->connection != DRM_MODE_CONNECTED) {
		fprintf(stderr, "ignoring unused connector %u\n",
			conn->connector_id);
		return -ENOENT;
	}

	/* check if there is at least one valid mode */
	if (conn->count_modes == 0) {
		fprintf(stderr, "no valid mode for connector %u\n",
			conn->connector_id);
		return -EFAULT;
	}

	/* copy the mode information into our device structure and into both
	 * buffers */
	memcpy(&dev->mode, &conn->modes[0], sizeof(dev->mode));
	dev->bufs[0].width = conn->modes[0].hdisplay;
	dev->bufs[0].height = conn->modes[0].vdisplay;
	dev->bufs[1].width = conn->modes[0].hdisplay;
	dev->bufs[1].height = conn->modes[0].vdisplay;
	fprintf(stderr, "mode for connector %u is %ux%u\n",
		conn->connector_id, dev->bufs[0].width, dev->bufs[0].height);

	/* find a crtc for this connector */
	ret = modeset_find_crtc(fd, res, conn, dev);
	if (ret) {
		fprintf(stderr, "no valid crtc for connector %u\n",
			conn->connector_id);
		return ret;
	}

	/* create framebuffer #1 for this CRTC */
	ret = modeset_create_fb(fd, &dev->bufs[0]);
	//printf("\n call modeset_create_fb, bufs[0].fd:%x, ret:%d\n",dev->bufs[0].fb,ret);
	if (ret) {
		fprintf(stderr, "cannot create framebuffer for connector %u\n",
			conn->connector_id);
		return ret;
	}
	fb_id_left = dev->bufs[0].fb;
	printf("app set fb_id_left:%x\n",fb_id_left);

	/* create framebuffer #2 for this CRTC */
	ret = modeset_create_fb(fd, &dev->bufs[1]);
	//printf("\n call modeset_create_fb, bufs[1].fb:%x, ret:%d\n",dev->bufs[1].fb,ret);
	if (ret) {
		fprintf(stderr, "cannot create framebuffer for connector %u\n",
			conn->connector_id);
		modeset_destroy_fb(fd, &dev->bufs[0]);
		return ret;
	}
	fb_id_right = dev->bufs[1].fb;
	printf("app set fb_id_right:%x\n",fb_id_right);

	return 0;
}

/*
 * modeset_find_crtc() stays the same.
 */

static int modeset_find_crtc(int fd, drmModeRes *res, drmModeConnector *conn,
			     struct modeset_dev *dev)
{
	drmModeEncoder *enc;
	unsigned int i, j;
	int32_t crtc;
	struct modeset_dev *iter;

	/* first try the currently conected encoder+crtc */
	if (conn->encoder_id)
		enc = drmModeGetEncoder(fd, conn->encoder_id);
	else
		enc = NULL;

	if (enc) {
		if (enc->crtc_id) {
			crtc = enc->crtc_id;
			for (iter = modeset_list; iter; iter = iter->next) {
				if (iter->crtc == crtc) {
					crtc = -1;
					break;
				}
			}

			if (crtc >= 0) {
				drmModeFreeEncoder(enc);
				dev->crtc = crtc;
				return 0;
			}
		}

		drmModeFreeEncoder(enc);
	}

	/* If the connector is not currently bound to an encoder or if the
	 * encoder+crtc is already used by another connector (actually unlikely
	 * but lets be safe), iterate all other available encoders to find a
	 * matching CRTC. */
	for (i = 0; i < conn->count_encoders; ++i) {
		enc = drmModeGetEncoder(fd, conn->encoders[i]);
		if (!enc) {
			fprintf(stderr, "cannot retrieve encoder %u:%u (%d): %m\n",
				i, conn->encoders[i], errno);
			continue;
		}

		/* iterate all global CRTCs */
		for (j = 0; j < res->count_crtcs; ++j) {
			/* check whether this CRTC works with the encoder */
			if (!(enc->possible_crtcs & (1 << j)))
				continue;

			/* check that no other device already uses this CRTC */
			crtc = res->crtcs[j];
			for (iter = modeset_list; iter; iter = iter->next) {
				if (iter->crtc == crtc) {
					crtc = -1;
					break;
				}
			}

			/* we have found a CRTC, so save it and return */
			if (crtc >= 0) {
				drmModeFreeEncoder(enc);
				dev->crtc = crtc;
				return 0;
			}
		}

		drmModeFreeEncoder(enc);
	}

	fprintf(stderr, "cannot find suitable CRTC for connector %u\n",
		conn->connector_id);
	return -ENOENT;
}

/*
 * modeset_create_fb() is mostly the same as before. Buf instead of writing the
 * fields of a modeset_dev, we now require a buffer pointer passed as @buf.
 * Please note that buf->width and buf->height are initialized by
 * modeset_setup_dev() so we can use them here.
 */

static int modeset_create_fb(int fd, struct modeset_buf *buf)
{
	struct drm_mode_create_dumb creq;
	struct drm_mode_destroy_dumb dreq;
	struct drm_mode_map_dumb mreq;
	int ret;

	/* create dumb buffer */
	memset(&creq, 0, sizeof(creq));
	creq.width = buf->width;
	creq.height = buf->height;
	creq.bpp = 32;
	ret = drmIoctl(fd, DRM_IOCTL_MODE_CREATE_DUMB, &creq);
	if (ret < 0) {
		fprintf(stderr, "cannot create dumb buffer (%d): %m\n",
			errno);
		return -errno;
	}
	buf->stride = creq.pitch;
	buf->size = creq.size;
	buf->handle = creq.handle;

	/* create framebuffer object for the dumb-buffer */
	ret = drmModeAddFB(fd, buf->width, buf->height, 24, 32, buf->stride,
			   buf->handle, &buf->fb);
	if (ret) {
		fprintf(stderr, "cannot create framebuffer (%d): %m\n",
			errno);
		ret = -errno;
		goto err_destroy;
	}

	/* prepare buffer for memory mapping */
	memset(&mreq, 0, sizeof(mreq));
	mreq.handle = buf->handle;
	ret = drmIoctl(fd, DRM_IOCTL_MODE_MAP_DUMB, &mreq);
	if (ret) {
		fprintf(stderr, "cannot map dumb buffer (%d): %m\n",
			errno);
		ret = -errno;
		goto err_fb;
	}

	/* perform actual memory mapping */
	buf->map = mmap(0, buf->size, PROT_READ | PROT_WRITE, MAP_SHARED,
		        fd, mreq.offset);
	if (buf->map == MAP_FAILED) {
		fprintf(stderr, "cannot mmap dumb buffer (%d): %m\n",
			errno);
		ret = -errno;
		goto err_fb;
	}

	/* clear the framebuffer to 0 */
	memset(buf->map, 0, buf->size);

	return 0;

err_fb:
	drmModeRmFB(fd, buf->fb);
err_destroy:
	memset(&dreq, 0, sizeof(dreq));
	dreq.handle = buf->handle;
	drmIoctl(fd, DRM_IOCTL_MODE_DESTROY_DUMB, &dreq);
	return ret;
}

/*
 * modeset_destroy_fb() is a new function. It does exactly the reverse of
 * modeset_create_fb() and destroys a single framebuffer. The modeset.c example
 * used to do this directly in modeset_cleanup().
 * We simply unmap the buffer, remove the drm-FB and destroy the memory buffer.
 */

static void modeset_destroy_fb(int fd, struct modeset_buf *buf)
{
	struct drm_mode_destroy_dumb dreq;

	/* unmap buffer */
	munmap(buf->map, buf->size);

	/* delete framebuffer */
	drmModeRmFB(fd, buf->fb);

	/* delete dumb buffer */
	memset(&dreq, 0, sizeof(dreq));
	dreq.handle = buf->handle;
	drmIoctl(fd, DRM_IOCTL_MODE_DESTROY_DUMB, &dreq);
}

/*
 * main() also stays almost exactly the same as before. We only need to change
 * the way that we initially set the CRTCs. Instead of using the buffer
 * information from modeset_dev, we now use dev->bufs[iter->front_buf] to get
 * the current front-buffer and use this framebuffer for drmModeSetCrtc().
 */

int main(int argc, char **argv)
{
	int ret, fd;
	const char *card;
	struct modeset_dev *iter;
	struct modeset_buf *buf;

	/* check which DRM device to open */
	if (argc > 1)
		card = argv[1];
	else
		card = "/dev/dri/card0";

	fprintf(stderr, "using card '%s'\n", card);

	/* open the DRM device */
	ret = modeset_open(&fd, card);
	if (ret)
		goto out_return;

	/* prepare all connectors and CRTCs */
	ret = modeset_prepare(fd);
	if (ret)
		goto out_close;

	/* perform actual modesetting on each found connector+CRTC */
	for (iter = modeset_list; iter; iter = iter->next) {
		iter->saved_crtc = drmModeGetCrtc(fd, iter->crtc);
		buf = &iter->bufs[iter->front_buf];
		ret = drmModeSetCrtc(fd, iter->crtc, buf->fb, 0, 0,
				     &iter->conn, 1, &iter->mode);
		if (ret)
			fprintf(stderr, "cannot set CRTC for connector %u (%d): %m\n",
				iter->conn, errno);
	}

	/* draw some colors for 5seconds */
	modeset_draw(fd);

	/* cleanup everything */
	modeset_cleanup(fd);

	ret = 0;

out_close:
	close(fd);
out_return:
	if (ret) {
		errno = -ret;
		fprintf(stderr, "modeset failed with error %d: %m\n", errno);
	} else {
		fprintf(stderr, "exiting\n");
	}
	return ret;
}

/*
 * A short helper function to compute a changing color value. No need to
 * understand it.
 */

static uint8_t next_color(bool *up, uint8_t cur, unsigned int mod)
{
	uint8_t next;

	next = cur + (*up ? 1 : -1) * (rand() % mod);
	if ((*up && next < cur) || (!*up && next > cur)) {
		*up = !*up;
		next = cur;
	}

	return next;
}

/*
 * modeset_draw() is the place where things change. The render-logic is the same
 * and we still draw a solid-color on the whole screen. However, we now have two
 * buffers and need to flip between them.
 *
 * So before drawing into a framebuffer, we need to find the back-buffer.
 * Remember, dev->font_buf is the index of the front buffer, so
 * dev->front_buf ^ 1 is the index of the back buffer. We simply use
 * dev->bufs[dev->front_buf ^ 1] to get the back-buffer and draw into it.
 *
 * After we finished drawing, we need to flip the buffers. We do this with the
 * same call as we initially set the CRTC: drmModeSetCrtc(). However, we now
 * pass the back-buffer as new framebuffer as we want to flip them.
 * The only thing left to do is to change the dev->front_buf index to point to
 * the new back-buffer (which was previously the front buffer).
 * We then sleep for a short time period and start drawing again.
 *
 * If you run this example, you will notice that there is almost no flickering,
 * anymore. The buffers are now swapped as a whole so each new frame shows
 * always the whole new image. If you look carefully, you will notice that the
 * modeset.c example showed many screen corruptions during redraw-cycles.
 *
 * However, this example is still not perfect. Imagine the display-controller is
 * currently scanning out a new image and we call drmModeSetCrtc()
 * simultaneously. It will then have the same effect as if we used a single
 * buffer and we get some tearing. But, the chance that this happens is a lot
 * less likely as with a single-buffer. This is because there is a long period
 * between each frame called vertical-blank where the display-controller does
 * not perform a scanout. If we swap the buffers in this period, we have the
 * guarantee that there will be no tearing. See the modeset-vsync.c example if
 * you want to know how you can guarantee that the swap takes place at a
 * vertical-sync.
 */

static void modeset_draw(int fd)
{
	uint8_t r, g, b;
	bool r_up, g_up, b_up;
	unsigned int i, j, k, off;
	struct modeset_dev *iter;
	struct modeset_buf *buf,*buf_left,*buf_right;
	int ret;
	int id_left=1;
	struct timeval tvBegin;
	struct timeval tvNow;
	struct timeval tvTT;
	unsigned int nTimeTest = 0; /* usec */

	if( fb_id_left == (modeset_hdmi->bufs[0]).fb ){
		buf_left 	= &modeset_hdmi->bufs[0];
		buf_right 	= &modeset_hdmi->bufs[1];
	}else{
		buf_left 	= &modeset_hdmi->bufs[1];
		buf_right 	= &modeset_hdmi->bufs[0];
	}
	printf("fb_id_left : %x\n",fb_id_left);
	printf("bufs[0].fb : %x\n",modeset_hdmi->bufs[0].fb);
	printf("bufs[1].fb : %x\n",modeset_hdmi->bufs[1].fb);

	gettimeofday(&tvBegin,NULL);
	r = 0; g = 255; b = 0;
	for (j = 0; j < buf_left->height; ++j) {
		for (k = 0; k < buf_left->width; ++k) {
			off = buf_left->stride * j + k * 4;
			*(uint32_t*)&buf_left->map[off] =
			     (r << 16) | (g << 8) | b;
		}
	}
	gettimeofday(&tvNow,NULL);
		nTimeTest = (tvNow.tv_sec - tvBegin.tv_sec) * 1000000 +
			    (tvNow.tv_usec - tvBegin.tv_usec);
	printf("buf0 tvBegin(sec:%8u , usec:%8u)\n",tvBegin.tv_sec,tvBegin.tv_usec);
	printf("buf0 tvNow(sec:%8u , usec:%8u)\n",tvNow.tv_sec,tvNow.tv_usec);
	printf("buf0 diff %8u, height:%d,width:%d\n",nTimeTest,buf_right->height,buf_right->width);

	gettimeofday(&tvBegin,NULL);
	r = 255; g = 0; b = 0;
	for (j = 0; j < buf_right->height; ++j) {
		for (k = 0; k < buf_right->width; ++k) {
			off = buf_right->stride * j + k * 4;
			*(uint32_t*)&buf_right->map[off] =
			     (r << 16) | (g << 8) | b;
		}
	}
	gettimeofday(&tvNow,NULL);
		nTimeTest = (tvNow.tv_sec - tvBegin.tv_sec) * 1000000 +
			    (tvNow.tv_usec - tvBegin.tv_usec);
	printf("buf1 tvBegin(sec:%8u , usec:%8u)\n",tvBegin.tv_sec,tvBegin.tv_usec);
	printf("buf1 tvNow(sec:%8u , usec:%8u)\n",tvNow.tv_sec,tvNow.tv_usec);
	printf("buf1 diff %8u, height:%d,width:%d\n",nTimeTest,buf_right->height,buf_right->width);
#if 1
	id_left = 1;
	for(i=0; i<101; ++i){
		if(id_left){
//			r = 0; g = 255; b = 0;
			buf = buf_left;
			id_left = 0;
		}else{
//			r = 255; g = 0; b = 0;
			buf = buf_right;
			id_left = 1;
		}

/* test 1
 33ms, delay 10ms
		for (j = 0; j < buf->height; ++j) {
			for (k = 0; k < buf->width; ++k) {
				off = buf->stride * j + k * 4;
				*(uint32_t*)&buf->map[off] =
				     (r << 16) | (g << 8) | b;
			}
		}
*/
/* test 2
 * remove copy buf, 16.8ms, delay 10ms*/

/* test 3
 * remove copy buf, 16.8ms, delay 1ms*/

		//printf("drmModeSetCrtc fb_id:%x\n",buf->fb);
		gettimeofday(&tvBegin,NULL);
		ret = drmModeSetCrtc(fd, modeset_hdmi->crtc, buf->fb, 0, 0,
				     &modeset_hdmi->conn, 1, &modeset_hdmi->mode);
		gettimeofday(&tvNow,NULL);
		if(i >= 1){
			nTimeTest += (tvNow.tv_sec - tvBegin.tv_sec) * 1000000 + (tvNow.tv_usec - tvBegin.tv_usec);
		}

		if (ret){
			fprintf(stderr, "cannot flip CRTC for connector %u (%d): %m\n",
				modeset_hdmi->conn, errno);
		}
	}
	printf("crtc diff %8u\n",nTimeTest);
	return;
#endif

	srand(time(NULL));
	r = rand() % 0xff;
	g = rand() % 0xff;
	b = rand() % 0xff;
	r_up = g_up = b_up = true;

	for (i = 0; i < 50; ++i) {
		r = next_color(&r_up, r, 20);
		g = next_color(&g_up, g, 10);
		b = next_color(&b_up, b, 5);

		for (iter = modeset_list; iter; iter = iter->next) {
			buf = &iter->bufs[iter->front_buf ^ 1];
			for (j = 0; j < buf->height; ++j) {
				for (k = 0; k < buf->width; ++k) {
					off = buf->stride * j + k * 4;
					*(uint32_t*)&buf->map[off] =
						     (r << 16) | (g << 8) | b;
				}
			}

			ret = drmModeSetCrtc(fd, iter->crtc, buf->fb, 0, 0,
					     &iter->conn, 1, &iter->mode);
			if (ret)
				fprintf(stderr, "cannot flip CRTC for connector %u (%d): %m\n",
					iter->conn, errno);
			else
				iter->front_buf ^= 1;
		}

		usleep(100000);
	}
}

/*
 * modeset_cleanup() stays the same as before. But it now calls
 * modeset_destroy_fb() instead of accessing the framebuffers directly.
 */

static void modeset_cleanup(int fd)
{
	struct modeset_dev *iter;

	while (modeset_list) {
		/* remove from global list */
		iter = modeset_list;
		modeset_list = iter->next;

		/* restore saved CRTC configuration */
		drmModeSetCrtc(fd,
			       iter->saved_crtc->crtc_id,
			       iter->saved_crtc->buffer_id,
			       iter->saved_crtc->x,
			       iter->saved_crtc->y,
			       &iter->conn,
			       1,
			       &iter->saved_crtc->mode);
		drmModeFreeCrtc(iter->saved_crtc);

		/* destroy framebuffers */
		modeset_destroy_fb(fd, &iter->bufs[1]);
		modeset_destroy_fb(fd, &iter->bufs[0]);

		/* free allocated memory */
		free(iter);
	}
}

/*
 * This was a very short extension to the basic modesetting example that shows
 * how double-buffering is implemented. Double-buffering is the de-facto
 * standard in any graphics application so any other example will be based on
 * this. It is important to understand the ideas behind it as the code is pretty
 * easy and short compared to modeset.c.
 *
 * Double-buffering doesn't solve all problems. Vsync'ed page-flips solve most
 * of the problems that still occur, but has problems on it's own (see
 * modeset-vsync.c for a discussion).
 *
 * If you want more code, I can recommend reading the source-code of:
 *  - plymouth (which uses dumb-buffers like this example; very easy to understand)
 *  - kmscon (which uses libuterm to do this)
 *  - wayland (very sophisticated DRM renderer; hard to understand fully as it
 *             uses more complicated techniques like DRM planes)
 *  - xserver (very hard to understand as it is split across many files/projects)
 *
 * Any feedback is welcome. Feel free to use this code freely for your own
 * documentation or projects.
 *
 *  - Hosted on http://github.com/dvdhrm/docs
 *  - Written by David Herrmann <[email protected]>
 */
 drm_crtc.c

Responses:
drmModeSetCrtc is a blocking call and will wait for VSYNC. What is the FPS of your display?

i used TDA2EVM5777 board HDMI display it is 60FPS about 16.6ms Connectors: id encoder status name size (mm) modes encoders 32 31 connected HDMI-A-1 0x0 30 31 modes: name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot) 1024x768 60 1024 1048 1184 1344 768 772 777 806 flags: phsync, nvsync; type: preferred, driver