data2/text/range/20001-25000/699738.txt

Ticket Name: Linux/TDA2: change log output uart 1 to uart3

Query Text:
Part Number: TDA2 Other Parts Discussed in Thread: DRA742, PCF8575, PMP, DRA752 Tool/software: Linux in u-boot modified board/ti/dra7xx/mux_data.h and u-boot/arch/arm/dts/dra7-evm-common.dtsi 1 in file board/ti/dra7xx/mux_data.h change /*{UART2_CTSN, (M3 | PIN_INPUT_PULLUP)}, /*uart2_ctsn.mmc4_dat2*/ /*{UART2_RTSN, (M3 | PIN_INPUT_PULLUP)}, /*uart2_rtsn.mmc4_dat3*/ to {UART2_CTSN, (M2 | PIN_INPUT_PULLUP| SLEWCONTROL) {UART2_RTSN, (M1 | PIN_INPUT_PULLUP| SLEWCONTROL) 2 u-boot/arch/arm/dts/dra7-evm-common.dtsi:14: change stdout-path = &uart1; to stdout-path = &uart3; uart3 already has log output but kernel stopped In addtition£¬I modified /kernel/omap/arch/arm/boot/dts dra72-evm-common.dtsi stdout-path = &uart1; { aliases { display0 = &hdmi0; sound0 = &sound0; sound1 = &hdmi; }; chosen { stdout-path = &uart3; }; Block some code in dra72-evm.dts about MMC4's part. what is the reason of the question? I found that board-support/linux/arch/arm/configs/ti_sdk_dra7x_release_defconfig changed CONFIG_DEBUG_OMAP2UART1=y 1modfied to 3. make linux£¬CONFIG_DEBUG_OMAP2UART3=y can auto reback CONFIG_DEBUG_OMAP2UART1=y How to fixed it? in u-boot modified board/ti/dra7xx/mux_data.h and u-boot/arch/arm/dts/dra7-evm-common.dtsi£¬ 1¡¢file board/ti/dra7xx/mux_data.h change /*{UART2_CTSN, (M3 | PIN_INPUT_PULLUP)}, /*uart2_ctsn.mmc4_dat2*/ /*{UART2_RTSN, (M3 | PIN_INPUT_PULLUP)}, /*uart2_rtsn.mmc4_dat3*/ to {UART2_CTSN, (M2 | PIN_INPUT_PULLUP| SLEWCONTROL) {UART2_RTSN, (M1 | PIN_INPUT_PULLUP| SLEWCONTROL) 2¡¢u-boot/arch/arm/dts/dra7-evm-common.dtsi:14: change stdout-path = &uart1; to stdout-path = &uart3; uart3 already has log output £¬but £¬kernel stopped £º In addtition£¬I modified /kernel/omap/arch/arm/boot/dts dra72-evm-common.dtsi£º stdout-path = &uart1; { aliases { display0 = &hdmi0; sound0 = &sound0; sound1 = &hdmi; }; chosen { stdout-path = &uart3; }; Block some code £¨dra72-evm.dts£© about MMC4's part£º what is the reason of the question£¿ I found that board-support/linux/arch/arm/configs/ti_sdk_dra7x_release_defconfig changed CONFIG_DEBUG_OMAP2UART1=y 1modfied to 3. make linux£¬CONFIG_DEBUG_OMAP2UART3=y can auto reback CONFIG_DEBUG_OMAP2UART1=y£¡£¡ How to fixed it£¿

Responses:
Part Number: TDA2 Tool/software: Linux Linux ： how to change kernel log output port? how to change the .config uart1 to uart3 ?

Hi Widic, I merged your threads into one. Can you clarify what exactly is your problem - if I understand correctly you have successfully enabled uart3 logs for both u-boot and kernel, but the kernel stops for some other reason (mmc)? Can you also attach full boot log? Regards, Yordan

Hi,Yordan, We has the same problem for TDA2x, and I can offer you the full boot log as follows: U-Boot SPL 2016.05-00009-gac1d50feef-dirty (Jun 14 2018 - 16:56:55) DRA752-GP ES1.1 no pinctrl for ddr_1_8v Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Trying to boot from MMC1 reading dra7-ipu2-fw.lzop spl_load_file_fat: error reading file dra7-ipu2-fw.lzop, err - -1 spl: error reading image dra7-ipu2-fw.lzop, err - -1 Error loading remotecore IPU2!,Continuing with boot ... reading dra7-dsp1-fw.lzop spl_load_file_fat: error reading file dra7-dsp1-fw.lzop, err - -1 spl: error reading image dra7-dsp1-fw.lzop, err - -1 Error loading remotecore DSP1!,Continuing with boot ... reading dra7-dsp2-fw.lzop spl_load_file_fat: error reading file dra7-dsp2-fw.lzop, err - -1 spl: error reading image dra7-dsp2-fw.lzop, err - -1 Error loading remotecore DSP2!,Continuing with boot ... reading dra7-ipu1-fw.lzop spl_load_file_fat: error reading file dra7-ipu1-fw.lzop, err - -1 spl: error reading image dra7-ipu1-fw.lzop, err - -1 Error loading remotecore IPU1!,Continuing with boot ... Card did not respond to voltage select! *** Warning - MMC init failed, using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05-00009-gac1d50feef-dirty (Jun 14 2018 - 16:56:55 +0800) CPU : DRA752-GP ES1.1 Model: TI DRA742 Board: DRA74x EVM REV G.0 DRAM: 1.5 GiB MMC: i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 mmc@4809c000: fail to find hs-rev11 mode FDT_ERR_NOTFOUND mmc@4809c000: fail to find sdr25-rev11 mode FDT_ERR_NOTFOUND mmc@4809c000: fail to find sdr12-rev11 mode FDT_ERR_NOTFOUND mmc@480b4000: fail to find hs-rev11 mode FDT_ERR_NOTFOUND OMAP SD/MMC: 0, OMAP SD/MMC: 1 Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Card did not respond to voltage select! ERROR: invalid mmc device at arch/arm/cpu/armv7/omap-common/utils.c:193/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 switch to partitions #0, OK mmc0 is current device i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 165 bytes read in 2 ms (80.1 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 switch to partitions #0, OK mmc0 is current device i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 SD/MMC found on device 0 3553888 bytes read in 174 ms (19.5 MiB/s) 106677 bytes read in 22 ms (4.6 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x363a60 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffff0b4 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.84-00105-gc66ba60e1092-dirty (root@G2) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #7 SMP PREEMPT Mon Jun 11 14:56:09 HKT 2018 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB [ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 80 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 64 MiB [ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES1.1 [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef62b000 s14912 r8192 d21952 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243264 [ 0.000000] Kernel command line: console=ttyS2,115200n8 vram=16M root=PARTUUID=80a878a6-02 rw rootwait ip=none mem=1024M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 410844K/979968K available (6623K kernel code, 319K rwdata, 2388K rodata, 336K init, 290K bss, 364324K reserved, 204800K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d502c (9013 kB) [ 0.000000] .init : 0xc08d6000 - 0xc092a000 ( 336 kB) [ 0.000000] .data : 0xc092a000 - 0xc0979f60 ( 320 kB) [ 0.000000] .bss : 0xc097b000 - 0xc09c3800 ( 290 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000015] Switching to timer-based delay loop, resolution 162ns [ 0.000332] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000339] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000793] Console: colour dummy device 80x30 [ 0.000815] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000828] pid_max: default: 32768 minimum: 301 [ 0.000927] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000938] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001481] Initializing cgroup subsys io [ 0.001498] Initializing cgroup subsys memory [ 0.001523] Initializing cgroup subsys devices [ 0.001536] Initializing cgroup subsys freezer [ 0.001547] Initializing cgroup subsys perf_event [ 0.001559] Initializing cgroup subsys pids [ 0.001585] CPU: Testing write buffer coherency: ok [ 0.001783] /cpus/cpu@0 missing clock-frequency property [ 0.001799] /cpus/cpu@1 missing clock-frequency property [ 0.001809] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001841] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.080060] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080128] Brought up 2 CPUs [ 0.080141] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.080148] CPU: All CPU(s) started in HYP mode. [ 0.080153] CPU: Virtualization extensions available. [ 0.080527] devtmpfs: initialized [ 0.109176] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.110167] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.313881] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.313902] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.318183] pinctrl core: initialized pinctrl subsystem [ 0.319039] NET: Registered protocol family 16 [ 0.319964] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.350231] cpuidle: using governor ladder [ 0.380257] cpuidle: using governor menu [ 0.388781] OMAP GPIO hardware version 0.1 [ 0.395297] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.411675] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.411688] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.421023] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.421033] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.421496] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.421506] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.422084] OMAP DMA hardware revision 0.0 [ 0.461535] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.462687] edma 43300000.edma: memcpy is disabled [ 0.467356] edma 43300000.edma: TI EDMA DMA engine driver [ 0.471729] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.471905] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.472065] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.472222] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.472511] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.472694] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.475728] palmas 0-0058: IRQ missing: skipping irq request [ 0.491153] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.563494] pcf857x 0-0020: probed [ 0.563740] pcf857x: probe of 0-0021 failed with error -121 [ 0.563898] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.564287] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.564492] media: Linux media interface: v0.10 [ 0.564547] Linux video capture interface: v2.00 [ 0.564587] pps_core: LinuxPPS API ver. 1 registered [ 0.564595] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.564621] PTP clock support registered [ 0.564669] EDAC MC: Ver: 3.0.0 [ 0.565421] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.565713] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.566045] Advanced Linux Sound Architecture Driver Initialized. [ 0.566881] clocksource: Switched to clocksource arch_sys_counter [ 0.577518] NET: Registered protocol family 2 [ 0.578010] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.578075] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.578200] TCP: Hash tables configured (established 8192 bind 8192) [ 0.578248] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.578279] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.578490] NET: Registered protocol family 1 [ 0.578753] RPC: Registered named UNIX socket transport module. [ 0.578762] RPC: Registered udp transport module. [ 0.578769] RPC: Registered tcp transport module. [ 0.578776] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.579769] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.589784] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.590425] NFS: Registering the id_resolver key type [ 0.590461] Key type id_resolver registered [ 0.590469] Key type id_legacy registered [ 0.590523] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.591797] bounce: pool size: 64 pages [ 0.591948] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.591962] io scheduler noop registered [ 0.591974] io scheduler deadline registered [ 0.592007] io scheduler cfq registered (default) [ 0.596948] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.600101] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 0.600113] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 0.600146] IO 0x20003000..0x20012fff -> 0x00000000 [ 0.600168] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 0.630322] dra7-pcie 51000000.pcie_rc: link is not up [ 0.630497] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 0.630510] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.630520] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.630529] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.630932] PCI: bus0: Fast back to back transfers disabled [ 0.631048] PCI: bus1: Fast back to back transfers enabled [ 0.631131] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.631145] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.631158] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.631385] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.691683] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.695070] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250 [ 0.695935] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250 [ 0.696768] console [ttyS2] disabled [ 0.696815] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250 [ 1.712309] console [ttyS2] enabled [ 1.717021] [drm] Initialized drm 1.1.0 20060810 [ 1.723048] OMAP DSS rev 6.1 [ 1.726798] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.742468] loop: module loaded [ 1.745979] vmemexp device MAJOR num = 246 [ 1.750134] vmemexp class registered [ 1.753847] /dev/vmemexp device registered [ 1.757981] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 [ 1.763662] nand: No NAND device found [ 1.767450] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.777372] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) [ 1.782768] 7 ofpart partitions found on MTD device spi32766.0 [ 1.788649] Creating 7 MTD partitions on "spi32766.0": [ 1.793812] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.799939] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.806267] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.813219] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.819921] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.827315] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.833663] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.841456] libphy: Fixed MDIO Bus: probed [ 1.896916] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 1.903040] davinci_mdio 48485000.mdio: detected phy mask fffffff3 [ 1.913382] libphy: 48485000.mdio: probed [ 1.917456] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 1.925497] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown [ 1.934216] cpsw 48484000.ethernet: Detected MACID = 20:c3:8f:4a:59:14 [ 1.940918] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 1.947912] cpsw 48484000.ethernet: cpsw: Detected MACID = 20:c3:8f:4a:59:15 [ 1.956520] mousedev: PS/2 mouse device common for all mice [ 1.962732] i2c /dev entries driver [ 1.971529] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.977182] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 1.983567] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 1.990126] evm_3v3_sw: supplied by sysen1 The kernel has stopped at red place when running! I'm looking forward for your replay！ Regards， Yuting

Hi Yuting, I have pinged mmc experts. Regards, Yordan

Hi Yuting, UART is not the issue as you are able to see both u-boot and kernel logs on console. What board is this? your own board or TI EVM? Which SDK and release are you using? According to the u-boot log this is a different part number. dra72-evm-common.dtsi file is not the right one, you have to look at dra7-evm.dts and dra7-evm-common.dtsi file for this board. U-Boot SPL 2016.05-00009-gac1d50feef-dirty (Jun 14 2018 - 16:56:55) DRA752-GP ES1.1 Regards, Vishal

Hi Vishal, 1.This board is TI TDA2X EVM ,and CPU is DRA752. 2.We are using PROCESSOR_SDK_VISION_03_03_00_00 at linux. In order to change log output uart 1 to uart3, we changed the u-boot and kernel which caused this problem. And log output is normal using uart1, but uart3 has caugth the problem above. Then I will tell you what I have done. First, we modified the u-boot：menuconfig：uart3 used for console , and modified files of board/ti/dra7xx/mux_data.h and u-boot/arch/arm/dts/dra7-evm-common.dtsi， 1、board/ti/dra7xx/mux_data.h modified {UART2_CTSN, (M3 | PIN_INPUT_PULLUP)}, /*uart2_ctsn.mmc4_dat2*/ {UART2_RTSN, (M3 | PIN_INPUT_PULLUP)}, /*uart2_rtsn.mmc4_dat3*/ as {UART2_CTSN, (M2 | PIN_INPUT_PULLUP| SLEWCONTROL) {UART2_RTSN, (M1 | PIN_INPUT_PULLUP| SLEWCONTROL) 2、u-boot/arch/arm/dts/dra7-evm-common.dtsi: modified stdout-path = &uart1; as stdout-path = &uart3; Then we modified the kernel： menuconfig：uart3 used for console ，and modified the files of /arch/arm/configs/ti_sdk_dra7x_release_defconfig， dra7-evm-common.dtsi and dra7-evm.dts. 1、ti_sdk_dra7x_release_defconfig modified CONFIG_DEBUG_OMAP2UART1=y as CONFIG_DEBUG_OMAP2UART3=y 2、dra7-evm-common.dtsi modified stdout-path = &uart1; as stdout-path = &uart3; 3、dra7-evm.dts modified 0x3f8 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE3) /*uart2_ctsn.mmc4_dat2 */ 0x3fC (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */ as 0x3f8 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE2) 0x3fc (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) Finally，we modified the uenv.txt args_mmc=part uuid mmc 0:2 uuid; setenv bootargs "console=ttyO0,115200n8 elevator=noop root=PARTUUID=${uuid} rw rootwait earlyprintk fixrtc omapdrm.num_crtc=2 consoleblank=0 cma=128M@0xB0000000 rootfstype=ext4 snd.slots_reserved=1,1" modified console=ttyO0 as console=ttyS2 After that，the problem is showing out.

Hi, If this is a TI EVM why are you changing the console from UART1 to UART3? Also, since you are changing pinmux of mmc4 to be used as uart3 pins, try disabling mmc4 from dra7-evm.dts Change status of mmc4 to disabled and test. &mmc4 { status = "okay"; &mmc4 { status = "disabled"; Regards, Vishal

Hi,Vishal, we want to use UART1 as another function,so we have done some changes for the TI EVM. And I have tried disabling mmc4 from dra7-evm.dts, also, Change status of mmc4 to disabled .But the problem is the same. Regards, Yuting

Hi Yuting, -1- Do the below changes to Kernel and share the logs, -- Enable CONFIG_MMC_DEBUG option in Kernel config -- Append "loglevel=9" to args_mmc of uenv.txt -2- Check the H/W modifications and make sure you have not done any unwanted changes to board other than UART. Regards, Vishal

Hi Yuting, We haven't heard back from you, I'm assuming you were able to resolve your issue. If not, just post a reply below (or create a new thread if the thread has locked due to time-out). Regards, Yordan