|
Part Number: TDA2 Other Parts Discussed in Thread: PMP, DRA742, DRA752 Tool/software: Linux this is my uenv.txt! fdtfile=dra7-evm-infoadas.dtb args_mmc=setenv bootargs 'console=ttyO0,115200n8 vram=16M root=/dev/nfs rw nfsroot=172.17.218.40:/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/os_tools/linux/targetfs rootwait ip=dhcp mem=1024M' follow is booting log ** First descriptor is NOT a primary desc on 1:1 ** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid GPT *** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid Backup GPT *** ERROR: cannot find partition: 'userdata' at arch/arm/cpu/armv7/omap-common/utils.c:195/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 239 bytes read in 2 ms (116.2 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3552176 bytes read in 113 ms (30 MiB/s) 106665 bytes read in 16 ms (6.4 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x3633b0 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffff0a8 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.84-00018-gd326d64-dirty (hancan@hancan-virtual-machine) (gcc version 5.4.1 20170404 (Linaro GCC 5.4-2017.05) ) #15 SMP PREEMPT Fri Jul 20 11:12:46 CST 2018 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB [ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 80 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 64 MiB [ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef62b000 s14912 r8192 d21952 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243264 [ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=/dev/nfs rw nfsroot=172.17.218.40:/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/os_tools/linux/targetfs rootwait ip=dhcp mem=1024M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 410844K/979968K available (6619K kernel code, 319K rwdata, 2388K rodata, 340K init, 290K bss, 364324K reserved, 204800K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d402c (9009 kB) [ 0.000000] .init : 0xc08d5000 - 0xc092a000 ( 340 kB) [ 0.000000] .data : 0xc092a000 - 0xc0979d60 ( 320 kB) [ 0.000000] .bss : 0xc097b000 - 0xc09c3800 ( 290 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000015] Switching to timer-based delay loop, resolution 162ns [ 0.000341] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000350] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000793] Console: colour dummy device 80x30 [ 0.000810] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000816] This ensures that you still see kernel messages. Please [ 0.000821] update your kernel commandline. [ 0.000836] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000849] pid_max: default: 32768 minimum: 301 [ 0.000947] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000957] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001500] Initializing cgroup subsys io [ 0.001517] Initializing cgroup subsys memory [ 0.001541] Initializing cgroup subsys devices [ 0.001553] Initializing cgroup subsys freezer [ 0.001564] Initializing cgroup subsys perf_event [ 0.001575] Initializing cgroup subsys pids [ 0.001602] CPU: Testing write buffer coherency: ok [ 0.001799] /cpus/cpu@0 missing clock-frequency property [ 0.001816] /cpus/cpu@1 missing clock-frequency property [ 0.001827] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001859] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.080089] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080158] Brought up 2 CPUs [ 0.080171] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.080177] CPU: All CPU(s) started in HYP mode. [ 0.080183] CPU: Virtualization extensions available. [ 0.080563] devtmpfs: initialized [ 0.109216] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.110211] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.313075] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.313095] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.317329] pinctrl core: initialized pinctrl subsystem [ 0.318175] NET: Registered protocol family 16 [ 0.319102] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.340228] cpuidle: using governor ladder [ 0.370255] cpuidle: using governor menu [ 0.378691] OMAP GPIO hardware version 0.1 [ 0.385080] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.401126] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.401140] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.410440] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.410450] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.410912] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.410922] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.411501] OMAP DMA hardware revision 0.0 [ 0.451285] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.452441] edma 43300000.edma: memcpy is disabled [ 0.457006] edma 43300000.edma: TI EDMA DMA engine driver [ 0.461338] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.461521] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.461684] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.461841] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.462129] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.462314] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.465298] palmas 0-0058: IRQ missing: skipping irq request [ 0.480763] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.553058] pcf857x 0-0020: probed [ 0.553616] pcf857x 0-0021: probed [ 0.553766] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.554151] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.554358] media: Linux media interface: v0.10 [ 0.554410] Linux video capture interface: v2.00 [ 0.554453] pps_core: LinuxPPS API ver. 1 registered [ 0.554460] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.554483] PTP clock support registered [ 0.554527] EDAC MC: Ver: 3.0.0 [ 0.555272] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.555571] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.555900] Advanced Linux Sound Architecture Driver Initialized. [ 0.556734] clocksource: Switched to clocksource arch_sys_counter [ 0.567166] NET: Registered protocol family 2 [ 0.567670] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.567733] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.567858] TCP: Hash tables configured (established 8192 bind 8192) [ 0.567905] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.567936] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.568147] NET: Registered protocol family 1 [ 0.568416] RPC: Registered named UNIX socket transport module. [ 0.568426] RPC: Registered udp transport module. [ 0.568433] RPC: Registered tcp transport module. [ 0.568439] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.569450] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.579255] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.579900] NFS: Registering the id_resolver key type [ 0.579925] Key type id_resolver registered [ 0.579934] Key type id_legacy registered [ 0.579987] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.581240] bounce: pool size: 64 pages [ 0.581387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.581403] io scheduler noop registered [ 0.581415] io scheduler deadline registered [ 0.581447] io scheduler cfq registered (default) [ 0.586314] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.589469] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 0.589482] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 0.589515] IO 0x20003000..0x20012fff -> 0x00000000 [ 0.589537] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 0.619541] dra7-pcie 51000000.pcie_rc: link is not up [ 0.619713] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 0.619726] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.619736] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.619746] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.620139] PCI: bus0: Fast back to back transfers disabled [ 0.620259] PCI: bus1: Fast back to back transfers enabled [ 0.620342] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.620357] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.620369] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.620585] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.679838] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.683189] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250 [ 1.702019] console [ttyS0] enabled [ 1.706400] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250 [ 1.716095] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250 [ 1.726142] [drm] Initialized drm 1.1.0 20060810 [ 1.732193] OMAP DSS rev 6.1 [ 1.735941] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.751618] loop: module loaded [ 1.755132] vmemexp device MAJOR num = 246 [ 1.759286] vmemexp class registered [ 1.762998] /dev/vmemexp device registered [ 1.767130] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 [ 1.772798] nand: No NAND device found [ 1.776569] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.786496] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) [ 1.791916] 7 ofpart partitions found on MTD device spi32766.0 [ 1.797795] Creating 7 MTD partitions on "spi32766.0": [ 1.802956] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.809063] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.815380] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.822324] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.829017] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.836386] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.842742] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.850513] libphy: Fixed MDIO Bus: probed [ 1.906763] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 1.912886] davinci_mdio 48485000.mdio: detected phy mask fffffff3 [ 1.923418] libphy: 48485000.mdio: probed [ 1.927491] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 1.935532] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown [ 1.944242] cpsw 48484000.ethernet: Detected MACID = 7c:38:66:a1:e2:a6 [ 1.950941] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 1.957945] cpsw 48484000.ethernet: cpsw: Detected MACID = 7c:38:66:a1:e2:a7 [ 1.966539] mousedev: PS/2 mouse device common for all mice [ 1.972756] i2c /dev entries driver [ 1.981533] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.987155] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 1.993540] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 2.000096] evm_3v3_sw: supplied by sysen1 [ 2.080509] mmc0: MAN_BKOPS_EN bit is not set [ 2.116767] mmc0: new HS200 MMC card at address 0001 [ 2.132203] mmcblk0: mmc0:0001 MMC08G 7.25 GiB [ 2.147258] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB [ 2.158518] ledtrig-cpu: registered to indicate activity on CPUs [ 2.164703] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB [ 2.173413] aic_dvdd: supplied by evm_3v3_sw [ 2.179371] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [ 2.186798] NET: Registered protocol family 10 [ 2.202069] sit: IPv6 over IPv4 tunneling driver [ 2.207278] NET: Registered protocol family 17 [ 2.211956] Key type dns_resolver registered [ 2.216365] omap_voltage_late_init: Voltage driver support not added [ 2.223258] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.229489] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.236184] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.242420] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.250619] Power Management for TI OMAP4+ devices. [ 2.255688] Registering SWP/SWPB emulation handler [ 2.262561] dmm 4e000000.dmm: initialized all PAT entries [ 2.269906] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.276549] [drm] No driver support for vblank timestamp query. [ 2.282855] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 2.299706] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.338073] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 2.357735] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.365616] hctosys: unable to open rtc device (rtc0) [ 2.379019] net eth0: initializing cpsw version 1.15 (0) [ 2.384368] net eth0: initialized cpsw ale version 1.4 [ 2.389551] net eth0: ALE Table size 1024 [ 2.400775] net eth0: phy found : id is : 0x20005c7a [ 2.411786] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.417687] net eth1: initializing cpsw version 1.15 (0) [ 2.429896] net eth1: phy found : id is : 0x20005c7a [ 2.439504] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2.616598] mmc2: host does not support reading read-only switch, assuming write-enable [ 2.631709] mmc2: new ultra high speed DDR50 SDHC card at address aaaa [ 2.638675] mmcblk1: mmc2:aaaa SS08G 7.40 GiB [ 2.648355] mmcblk1: p1 p2 [ 4.404334] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 4.416776] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4.436759] Sending DHCP requests ., OK [ 4.596765] IP-Config: Got DHCP answer from 172.17.192.1, my address is 172.17.218.87 [ 4.610392] IP-Config: Complete: [ 4.613640] device=eth0, hwaddr=7c:38:66:a1:e2:a6, ipaddr=172.17.218.87, mask=255.255.224.0, gw=172.17.192.1 [ 4.623987] host=172.17.218.87, domain=apac.arcsoft.corp, nis-domain=(none) [ 4.631455] bootserver=172.17.11.203, rootserver=172.17.218.40, rootpath= [ 4.638604] nameserver0=172.17.10.20, nameserver1=172.17.10.31 [ 4.645240] evm_1v8: disabling [ 4.648325] aic_dvdd: disabling [ 4.651481] vmmcwl_fixed: disabling [ 4.655202] ldousb: disabling [ 4.658718] ALSA device list: [ 4.661700] #0: DRA7xx-EVM i donot know what is the problem and how to Solve this problem! BESTWISHES! |