| Ticket Name: Linux/TDA2: Cannot boot by SD card with linux kernel | |
| Query Text: | |
| Part Number: TDA2 Other Parts Discussed in Thread: DRA742, PMP Tool/software: Linux hi all, I want to boot TDA2 EVM with SD card, and got some problem, following is log: U-Boot SPL 2016.05-00002-g68a4cab-dirty (Apr 18 2018 - 03:14:38) DRA752-GP ES2.0 find_mmc_device(): MMC Device 1 not found *** Warning - No MMC card found, using default environment Trying to boot from MMC1 find_mmc_device(): MMC Device 1 not found *** Warning - No MMC card found, using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05-00002-g68a4cab-dirty (Apr 18 2018 - 03:14:38 +0800) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x EVM REV DRAM: 1.5 GiB MMC: OMAP SD/MMC: 0 find_mmc_device(): MMC Device 1 not found *** Warning - No MMC card found, using default environment Warning: fastboot.board_rev: unknown board revision find_mmc_device(): MMC Device 1 not found ERROR: invalid mmc device at arch/arm/cpu/armv7/omap-common/utils.c:189/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Could not get PHY for ethernet@48484000: addr 2 Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear find_mmc_device(): MMC Device 1 not found no mmc device at slot 1 omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear find_mmc_device(): MMC Device 1 not found ** Bad device mmc 1 ** find_mmc_device(): MMC Device 1 not found ** Bad device mmc 1 ** find_mmc_device(): MMC Device 1 not found ** Bad device mmc 1 ** find_mmc_device(): MMC Device 1 not found ** Bad device mmc 1 ** mmc - MMC sub system Usage: mmc info - display info of the current MMC device mmc read addr blk# cnt mmc write addr blk# cnt mmc erase blk# cnt mmc rescan mmc part - lists available partition on current mmc device mmc dev [dev] [part] - show or set current mmc device [partition] mmc list - lists available devices mmc hwpartition [args...] - does hardware partitioning arguments (sizes in 512-byte blocks): [user [enh start cnt] [wrrel {on|off}]] - sets user data area attributes [gp1|gp2|gp3|gp4 cnt [enh] [wrrel {on|off}]] - general purpose partition [check|set|complete] - mode, complete set partitioning completed WARNING: Partitioning is a write-once setting once it is set to complete. Power cycling is required to initialize partitions after set to complete. mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode - Set the BOOT_BUS_WIDTH field of the specified device mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB> - Change sizes of boot and RPMB partitions of specified device mmc partconf dev boot_ack boot_partition partition_access - Change the bits of the PARTITION_CONFIG field of the specified device mmc rst-function dev value - Change the RST_n_FUNCTION field of the specified device WARNING: This is a write-once field and 0 / 1 / 2 are the only valid values. mmc setdsr <value> - set DSR register value mmc - MMC sub system Usage: mmc info - display info of the current MMC device mmc read addr blk# cnt mmc write addr blk# cnt mmc erase blk# cnt mmc rescan mmc part - lists available partition on current mmc device mmc dev [dev] [part] - show or set current mmc device [partition] mmc list - lists available devices mmc hwpartition [args...] - does hardware partitioning arguments (sizes in 512-byte blocks): [user [enh start cnt] [wrrel {on|off}]] - sets user data area attributes [gp1|gp2|gp3|gp4 cnt [enh] [wrrel {on|off}]] - general purpose partition [check|set|complete] - mode, complete set partitioning completed WARNING: Partitioning is a write-once setting once it is set to complete. Power cycling is required to initialize partitions after set to complete. mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode - Set the BOOT_BUS_WIDTH field of the specified device mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB> - Change sizes of boot and RPMB partitions of specified device mmc partconf dev boot_ack boot_partition partition_access - Change the bits of the PARTITION_CONFIG field of the specified device mmc rst-function dev value - Change the RST_n_FUNCTION field of the specified device WARNING: This is a write-once field and 0 / 1 / 2 are the only valid values. mmc setdsr <value> - set DSR register value Booting from eMMC ... Wrong Image Format for bootm command ERROR: can't get kernel image! and my environment is ubuntu14.04 64bit, vision SDK v3.0.0. how can i fix this problem? Thanks. | |
| Responses: | |
| Hello , Is your SD card created without errors , Can you verify the boot pin settings and the re create the SD card and ensure no error. Refer linux user guide to create SD card Regards Chetan.M | |
| Hi, Chetan, when i create the SD card, there are no errors appear boot pin setting is chencked, it is the same as user guide re create the SD card, this problem still exists thanks. | |
| Hi , The error read Wrong Image Format for bootm command ERROR: can't get kernel image! *** Warning - No MMC card found, using default environment Warning: fastboot.board_rev: unknown board revision find_mmc_device(): MMC Device 1 not found ERROR: invalid mmc device which revision of board are you using . Can you give a try with different revision evm Regards Chetan.M | |
| Hi , Any updates on the thread Regards Chetan.M | |