data2/text/range/15001-20000/746549.txt

Ticket Name: Linux/TDA2: eve framcopy usecases add

Query Text:
Part Number: TDA2 Tool/software: Linux i am using SDK_VISION_03_04_00_00 . i am thy to add a usecases in sample_app\src\hlos\usecases chains_nullSrc_eveDisplay.txt is UseCase: chains_null_eveSrcDisplay NullSource (A15) -> Alg_FrameCopy (EVE1) ->Display cfg.mk is ALG_framecopy=yes NEED_PROC_IPU1_0=yes NEED_PROC_A15_0=yes NEED_PROC_EVE1=yes but when i run the usecases it failed ,i donot know what is the problem! follow is the log HOST] [HOST ] Sample Application Usecases, [HOST] [HOST ] --------------------------- [HOST] [HOST ] 1: Null Source -> Display (Supports only 1920x1080 HDMI display) [HOST] [HOST ] 2: Null Source_eve -> Display (Supports only 1920x1080 HDMI display) [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] 2 [HOST] [HOST ] 688.765357 s: #### ENTERING SAMPLE_APP:NULL SOURCE_eve -> DISPLAY USE CASE #### ASSERT (system_ipc_msgq.c|System_ipcMsgQTskMain|218) [HOST] [HOST ] 689.779296 s: IPC_OUT_0 : Create in progress !!! [HOST] [HOST ] 689.779357 s: IPC_OUT_0 : Create Done !!! [HOST] [HOST ] 689.780424 s: IPC_IN_0 : Create in progress !!! [HOST] [HOST ] 689.780455 s: IPC_IN_0 : Create Done !!! [HOST] [HOST ] 689.780485 s: SYSTEM: IPC: [HOST] Notify send failed (Socket operation on non-socket, 88) !!! [HOST] [EVE1 ] 689.779723 s: IPC_IN_0 : Create in progress !!! in PROCESSOR_SDK_VISION_03_04_00_00/ti_components/os_tools/linux/targetfs/lib/firmware$ have dra7-dsp1-fw.lzop dra7-dsp2-fw.xe66.rsc dra7-ipu2-fw.xem4.rsc dra7-dsp1-fw.xe66 dra7-ipu2-fw.lzop goodix_9271_cfg.bin dra7-dsp1-fw.xe66.rsc dra7-ipu2-fw.xem4 tigon dra7-dsp2-fw.lzop dra7-ipu2-fw.xem4.ipumm-fw vpdma-1b8.bin dra7-dsp2-fw.xe66 dra7-ipu2-fw.xem4.map but no files for arp32.

Responses:
Hi, Please take a reference of the below usecase vision_sdk\apps\src\hlos\adas\src\usecases\vip_single_cam_framecopyEve_sgx_display You can replace the capture link with your NullSource link if the input file is in raw format. If the input file is in encoded format then please add a decoder link after NullSource. Regards, Anuj

Hi Anuj: yes i can refer to vision_sdk\apps\src\hlos\adas\src\usecases\vip_single_cam_framecopyEve_sgx_display. But sample_app\src\hlos\usecases \nullSrc_display is more simple i think just replace DSP1 to EVE1 NullSource (A15) -> Alg_FrameCopy (DSP1) ->Display NullSource (A15) -> Alg_FrameCopy (EVE1) ->Display Can this be done in theory? 7115.chains_nullSrcDisplay.c /*
Copyright (c) [2012 - 2017] Texas Instruments Incorporated

All rights reserved not granted herein.

Limited License.

 Texas Instruments Incorporated grants a world-wide, royalty-free, non-exclusive
 license under copyrights and patents it now or hereafter owns or controls to
 make,  have made, use, import, offer to sell and sell ("Utilize") this software
 subject to the terms herein.  With respect to the foregoing patent license,
 such license is granted  solely to the extent that any such patent is necessary
 to Utilize the software alone.  The patent license shall not apply to any
 combinations which include this software, other than combinations with devices
 manufactured by or for TI ("TI Devices").  No hardware patent is licensed
 hereunder.

 Redistributions must preserve existing copyright notices and reproduce this
 license (including the above copyright notice and the disclaimer and
 (if applicable) source code license limitations below) in the documentation
 and/or other materials provided with the distribution

 Redistribution and use in binary form, without modification, are permitted
 provided that the following conditions are met:

 * No reverse engineering, decompilation, or disassembly of this software
   is permitted with respect to any software provided in binary form.

 * Any redistribution and use are licensed by TI for use only with TI Devices.

 * Nothing shall obligate TI to provide you with source code for the software
   licensed and provided to you in object code.

 If software source code is provided to you, modification and redistribution of
 the source code are permitted provided that the following conditions are met:

 * Any redistribution and use of the source code, including any resulting
   derivative works, are licensed by TI for use only with TI Devices.

 * Any redistribution and use of any object code compiled from the source code
   and any resulting derivative works, are licensed by TI for use only with TI
   Devices.

 Neither the name of Texas Instruments Incorporated nor the names of its
 suppliers may be used to endorse or promote products derived from this software
 without specific prior written permission.

 DISCLAIMER.

 THIS SOFTWARE IS PROVIDED BY TI AND TI�S LICENSORS "AS IS" AND ANY EXPRESS OR
 IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 IN NO EVENT SHALL TI AND TI�S LICENSORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

/*******************************************************************************
 *  INCLUDE FILES
 *******************************************************************************
 */
#include "chains_nullSrcDisplay_priv.h"
#include <src/hlos/chains_common/chains.h>
#include <links_fw/src/hlos/osa/include/osa_mem.h>
#include <src/common/TI_logo_640_224_sp.h>

/*******************************************************************************
 *  DEFINES
 *******************************************************************************
 */
#define NULLSRC_TIME_INTERVAL           (33)
#define NULLSRC_NUM_OUTBUF              (4)
#define NULLSRC_OUT_WIDTH                (768)       // (1280)
#define NULLSRC_OUT_HEIGHT                (576)       //  (720)
//#define TILOGO_WIDTH                    (640)
//#define TILOGO_HEIGHT                   (224)
#define TILOGO_WIDTH                    (768)
#define TILOGO_HEIGHT                   (576)
/*******************************************************************************
 *  GLOBALS
 *******************************************************************************
 */
chains_nullSrcDisplayObj gUcObj;
Chains_DisplayType gDisplayType;
UInt32 gDisplayWidth;
UInt32 gDisplayHeight;

static char useCaseRunTimeMenu[] = {
"\n "
"\n ===================="
"\n Chains Run-time Menu"
"\n ===================="
"\n "
"\n 0: Stop Chain"
"\n "
"\n p: Print Performance Statistics "
"\n "
"\n Enter Choice: "
"\n "
};

/**
 *******************************************************************************
 *
 * \brief   Null source Null use case Set Application paremeters
 *`
 *          This functions executes the create, start functions
 *
 *          Further in a while loop displays run time menu and waits
 *          for user inputs to print the statistics or to end the demo.
 *
 *          Once the user inputs end of demo stop and delete
 *          functions are executed.
 *
 * \param   chainsCfg       [IN]   Chains_Ctrl
 *
 *******************************************************************************
*/
Void chains_nullSrcDisplay_SetAppPrms(chains_nullSrcDisplayObj *pObj, Void *appObj)
{
    System_LinkChInfo *pChInfo;
    NullSrcLink_CreateParams *pNullSrcPrm = &pObj->NullSourcePrm;

    ChainsCommon_GetDisplayWidthHeight(
                gDisplayType,
                &gDisplayWidth,
                &gDisplayHeight);

    NullSrcLink_CreateParams_Init(pNullSrcPrm);

    pNullSrcPrm->timerPeriodMilliSecs = NULLSRC_TIME_INTERVAL;
    pNullSrcPrm->outQueInfo.numCh = 1;
    pNullSrcPrm->channelParams[0].numBuffers = NULLSRC_NUM_OUTBUF;

    pChInfo = &pNullSrcPrm->outQueInfo.chInfo[0];

    pChInfo->flags = System_Link_Ch_Info_Set_Flag_Data_Format(pChInfo->flags,
                                            SYSTEM_DF_YUV420SP_UV);
    pChInfo->flags = System_Link_Ch_Info_Set_Flag_Scan_Format(pChInfo->flags,
                                            SYSTEM_SF_PROGRESSIVE);
    pChInfo->flags = System_Link_Ch_Info_Set_Flag_Buf_Type(pChInfo->flags,
                                            SYSTEM_BUFFER_TYPE_VIDEO_FRAME);
    pChInfo->width = NULLSRC_OUT_WIDTH;
    pChInfo->height = NULLSRC_OUT_HEIGHT;
    pChInfo->startX = 0;
    pChInfo->startY = 0;
    pChInfo->pitch[0] = SystemUtils_align(pChInfo->width, 32);
    pChInfo->pitch[1] = SystemUtils_align(pChInfo->width, 32);
// Vps_printf(" ALGORITHM_LINK_DSP_ALG_FRAMECOPY  wordWidth: DMA: height CH (TCC) = %d (%d)\n", 300,300);
    /* Alg FrameCopy parameters */
    pObj->Alg_FrameCopyPrm.baseClassCreate.algId = ALGORITHM_LINK_DSP_ALG_FRAMECOPY;
    pObj->Alg_FrameCopyPrm.maxWidth           = NULLSRC_OUT_WIDTH;
    pObj->Alg_FrameCopyPrm.maxHeight          = NULLSRC_OUT_HEIGHT;
    pObj->Alg_FrameCopyPrm.numOutputFrames    = 3;

    /* Display parameters */
    pObj->DisplayPrm.rtParams.tarWidth = gDisplayWidth;
    pObj->DisplayPrm.rtParams.tarHeight = gDisplayHeight;
    pObj->DisplayPrm.rtParams.posX = 0U;
    pObj->DisplayPrm.rtParams.posY = 0U;
    pObj->DisplayPrm.displayId = DISPLAY_LINK_INST_DSS_VID1;

    ChainsCommon_StartDisplayCtrl(
                gDisplayType,
                gDisplayWidth,
                gDisplayHeight);
}

/**
 *******************************************************************************
 *
 * \brief   Fill the source buffers with known pattern
 *`
 *          This functions executes the create, start functions
 *
 *          Further in a while loop displays run time menu and waits
 *          for user inputs to print the statistics or to end the demo.
 *
 *          Once the user inputs end of demo stop and delete
 *          functions are executed.
 *
 * \param   chainsCfg       [IN]   Chains_Ctrl
 *
 *******************************************************************************
*/
static Void fillSrcBuf(chains_nullSrcDisplayObj *pObj)
{
    Int32 status;
    UInt32 ht, bufCnt, logoStartX, logoStartY, offset;
    UInt8 *srcAddr, *dstAddr;
    NullSrcLink_GetBufInfoParams getBufInfoPrm;
    System_Buffer *pBuffer;
    System_VideoFrameBuffer *pVideoFrame;

    /**
     *  Get the Null source buffer info
     */
    getBufInfoPrm.chId = 0U;
    status = System_linkControl(
                    pObj->NullSourceLinkID,
                    NULL_SRC_LINK_CMD_GET_BUF_INFO,
                    &getBufInfoPrm,
                    sizeof(NullSrcLink_GetBufInfoParams),
                    TRUE);
    UTILS_assert (SYSTEM_LINK_STATUS_SOK == status);

    for (bufCnt = 0;bufCnt < getBufInfoPrm.numBuf;bufCnt ++)
    {
        pBuffer = &getBufInfoPrm.buffer[bufCnt];
        pVideoFrame = pBuffer->payload;

        memset(
            pVideoFrame->bufAddr[0],
            0xFF,
            (NULLSRC_OUT_WIDTH * NULLSRC_OUT_HEIGHT));

        memset(
            pVideoFrame->bufAddr[1],
            0x80,
            (NULLSRC_OUT_WIDTH * NULLSRC_OUT_HEIGHT/2));

        /* copy TI logo */
        logoStartX = (NULLSRC_OUT_WIDTH - TILOGO_WIDTH)/2;
        logoStartY = (NULLSRC_OUT_HEIGHT - TILOGO_HEIGHT)/2;
        offset = (logoStartY * NULLSRC_OUT_WIDTH) + logoStartX;
        dstAddr = (UInt8*)((UInt32)pVideoFrame->bufAddr[0] + offset);
        srcAddr = tiLogo_640_224;
        for(ht = 0;ht < TILOGO_HEIGHT;ht++)
        {
            memcpy(dstAddr, srcAddr, TILOGO_WIDTH);
            dstAddr += NULLSRC_OUT_WIDTH;
            srcAddr += TILOGO_WIDTH;
        }

        offset = ((logoStartY/2) * NULLSRC_OUT_WIDTH) + logoStartX;
        dstAddr = (UInt8*)((UInt32)pVideoFrame->bufAddr[1] + offset);
        srcAddr = (UInt8*)((UInt32)tiLogo_640_224 + \
                                            (TILOGO_WIDTH * TILOGO_HEIGHT));
        for(ht = 0;ht < TILOGO_HEIGHT/2;ht++)
        {
            memcpy(dstAddr, srcAddr, TILOGO_WIDTH);
            dstAddr += NULLSRC_OUT_WIDTH;
            srcAddr += TILOGO_WIDTH;
        }
/////////////////////////////////////////////////////////////////////////////////arcsoft
	FILE *fptxt = fopen("./input_img/mykeys.txt", "rb");
	if (fptxt == NULL)
	{
		printf("fopen failed \n");
		return -1;
	}
	UInt8 Ciphertext[2048] = { 0 };
	fread(Ciphertext, 1, 2048, fptxt);
	fclose(fptxt);
        dstAddr = (UInt8*)((UInt32)pVideoFrame->bufAddr[1] + offset);
        memcpy(dstAddr, Ciphertext, 2048);
        //int i=0;
        //for (i = 0; i < 128; i++)
	 //{
          //   Vps_printf(" id = %d,Ciphertext=%d\n",i,dstAddr[i]);
        // }
////////////////////////////////////////////////////////////////////////////////////
        OSA_memCacheWb(
                (UInt32)pVideoFrame->bufAddr[0],
                ((UInt32)pVideoFrame->bufAddr[0] + \
                            (NULLSRC_OUT_WIDTH * NULLSRC_OUT_HEIGHT)));
        OSA_memCacheWb(
                (UInt32)pVideoFrame->bufAddr[1],
                ((UInt32)pVideoFrame->bufAddr[1] + \
                            (NULLSRC_OUT_WIDTH * (NULLSRC_OUT_HEIGHT/2))));
    }
}

/**
 *******************************************************************************
 *
 * \brief   Null source Null use case
 *`
 *          This functions executes the create, start functions
 *
 *          Further in a while loop displays run time menu and waits
 *          for user inputs to print the statistics or to end the demo.
 *
 *          Once the user inputs end of demo stop and delete
 *          functions are executed.
 *
 * \param   chainsCfg       [IN]   Chains_Ctrl
 *
 *******************************************************************************
*/
Void Chains_nullSrc_display()
{
    char ch;
    UInt32 done = FALSE;

    gDisplayType = CHAINS_DISPLAY_TYPE_HDMI_1080P;

    Vps_printf(" #### ENTERING SAMPLE_APP:NULL SOURCE -> DISPLAY USE CASE ####");

    chains_nullSrcDisplay_Create(&gUcObj,NULL);

    /* Fill the source buffers */
    fillSrcBuf(&gUcObj);
    ChainsCommon_statCollectorReset();
    ChainsCommon_memPrintHeapStatus();

    chains_nullSrcDisplay_Start(&gUcObj);

    ChainsCommon_prfLoadCalcEnable(TRUE, FALSE, FALSE);


    done = FALSE;
    while(!done)
    {
        Vps_printf(useCaseRunTimeMenu);
        ch = Chains_readChar();

        switch(ch)
        {
            case '0':
                done = TRUE;
                break;
            case 'p':
                chains_nullSrcDisplay_printStatistics(&gUcObj);
                ChainsCommon_PrintStatistics();
                break;
            default:
                Vps_printf("\nUnsupported option '%c'. Please try again\n",
                            ch);
                break;
        }
    }

    chains_nullSrcDisplay_Stop(&gUcObj);
    chains_nullSrcDisplay_Delete(&gUcObj);

    ChainsCommon_StopDisplayCtrl();
    ChainsCommon_prfLoadCalcEnable(FALSE, FALSE, FALSE);

    Vps_printf(" #### EXITING SAMPLE_APP:NULL SOURCE -> DISPLAY USE CASE ####");
}

can i move usecases\vip_single_cam_framecopyEve_sgx_display. usecase to sample_app\src\hlos\usecases and run it?

Hi, Only copying the folder wont work. You need to call that usecase and also you need to enable that usecase from uc_cfg.mk Regards, Anuj