id
stringlengths 4
12
| title
stringlengths 8
250
| type
stringclasses 2
values | version
stringclasses 612
values | working_group
stringclasses 30
values | url
stringlengths 65
81
| scope
stringlengths 0
65.7k
|
|---|---|---|---|---|---|---|
37.481 | E1 layer 1 | TS | 18.0.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.481/37481-i00.zip | The present document specifies the standards allowed to implement layer 1 on the E1 interface.
The specification of transmission delay requirements and O&M requirements are not in the scope of the present document.
In the following, 'layer 1' and 'physical layer' are assumed to be synonymous. |
37.482 | E1 signalling transport | TS | 18.1.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.482/37482-i10.zip | The present document specifies the standards for Signalling Transport to be used across the E1 interface. The E1 interface provides means for the interconnection of gNB-CU-CP and gNB-CU-UP within the NG-RAN architecture (TS 38.401 [2]), or for the interconnection of ng-eNB-CU-CP and ng-eNB-CU-UP within the NG-RAN architecture (TS 38.401 [2]), or for the interconnection of eNB-CP and eNB-UP within the E-UTRAN architecture (TS 36.401 [13]). |
37.483 | E1 Application Protocol (E1AP) | TS | 18.5.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.483/37483-i50.zip | The present document specifies the 5G radio network layer signalling protocol for the E1 interface. The E1 interface provides means for interconnecting a gNB-CU-CP and a gNB-CU-UP of a gNB within an NG-RAN, or for interconnecting a gNB-CU-CP and a gNB-CU-UP of an en-gNB within an E-UTRAN, or for interconnecting an eNB-CP and an eNB-UP of an eNB within an E-UTRAN, or for interconnecting an ng-eNB-CU-CP and an ng-eNB-CU-UP of an ng-eNB within an NG-RAN. The E1 Application Protocol (E1AP) supports the functions of E1 interface by signalling procedures defined in the present document. E1AP is developed in accordance to the general principles stated in TS 38.401 [2] and TS 37.480 [3]. |
37.571-1 | User Equipment (UE) conformance specification for UE positioning; Part 1: Conformance test specification | TS | 18.2.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.571-1/37571-1-i20.zip | The present document specifies the procedures for the conformance test of the measurement requirements for FDD or TDD mode of UTRA and FDD or TDD mode of E-UTRA, NB-IOT and NR for the User Equipment (UE) that supports one or more of the defined positioning methods. These positioning methods are:
- for UTRA: Assisted Global Positioning System (A-GPS), Assisted Global Navigation Satellite Systems (A-GNSS),
- for E-UTRA: Assisted Global Navigation Satellite System (A-GNSS), Observed Time Difference of Arrival (OTDOA), Enhanced Cell ID (ECID), Metropolitan Beacon System (MBS), Wireless Local Area Network (WLAN), Bluetooth Low Energy (BLE),
- for NB-IOT: Observed Time Difference of Arrival (OTDOA), [others FFS], and
- for NR: Assisted Global Navigation Satellite System (A-GNSS), Observed Time Difference of Arrival (OTDOA), Enhanced Cell ID (ECID), Metropolitan Beacon System (MBS), Wireless Local Area Network (WLAN), Bluetooth Low Energy (BLE).
Tests are only applicable to those mobiles that are intended to support the appropriate functionality. To indicate the circumstances in which tests apply, this is noted in the “Test applicability " part of the test.
The Implementation Conformance Statement (ICS) pro-forma could be found in the 3rd part of the present document. |
37.571-2 | User Equipment (UE) conformance specification for UE positioning; Part 2: Protocol conformance | TS | 18.2.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.571-2/37571-2-i20.zip | The present document specifies the protocol conformance testing for UTRAN, E-UTRAN and NR User Equipment (UE) supporting UE positioning.
This is the second part of a multi-part test specification. The following information can be found in this part:
- the overall protocol conformance test structure;
- the protocol conformance test configurations;
- the conformance requirement and reference to the core specifications;
- the test purposes; and
- a brief description of the test procedure, the specific test requirements and short message exchange table.
The Implementation Conformance Statement (ICS) pro-forma could be found in the 3rd part of the present document.
The present document is valid for UE supporting UE positioning implemented according to 3GPP releases starting from Release 99 up to the Release indicated on the cover page of the present document. |
37.571-3 | User Equipment (UE) conformance specification for UE positioning; Part 3: Implementation Conformance Statement (ICS) | TS | 18.2.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.571-3/37571-3-i20.zip | The present document provides the Implementation Conformance Statement (ICS) proforma for UTRAN, E-UTRAN and NR User Equipment (UE) supporting UE positioning, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-1 [7] and ISO/IEC 9646-7 [8].
The present document also specifies a recommended applicability statement for the test cases included in 3GPP TS 37.571-1 [5] and 3GPP TS 37.571-2 [6]. These applicability statements are based on the features implemented in the UE.
Special conformance testing functions can be found in 3GPP TS 34.109 [10] for UTRA, 3GPP TS 36.509 [2] for E-UTRA and 3GPP TS 38.509 [14] for NR. The common test environments are included in 3GPP TS 34.108 [9] for UTRA, in 3GPP TS 36.508 [3] for E-UTRA and in 3GPP TS 38.508-1 [15] for NR.
The present document is valid for UE supporting UE positioning implemented according to 3GPP releases starting from Release 99 up to the Release indicated on the cover page of the present document. |
37.571-4 | User Equipment (UE) conformance specification for UE positioning; Part 4: Test suites | TS | 18.1.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.571-4/37571-4-i10.zip | The present document specifies the protocol and signalling conformance testing in TTCN for the UE:
- A-GPS at the UTRA Uu interface;
- LTE positioning at the LTE-Uu interface;
- A-GNSS at the UTRA Uu interface.
- NR positioning at the NR-Uu interface.
The following TTCN test specification and design considerations can be found in the present document:
- Test system architecture;
- Test models and ASP definitions;
- Test methods and usage of communication ports definitions;
- Test configurations;
- Design principles and assumptions;
- TTCN styles and conventions;
- Partial PIXIT proforma;
- Test suites in TTCN-2 and TTCN-3;
- The Test Suites designed and implemented in the present document are based on the test specifications in prose in 3GPP TS 37.571‑2 [3];
- The applicability of the individual test cases is specified in the test ICS proforma specification in 3GPP TS 37.571‑3 [4]. |
37.571-5 | User Equipment (UE) conformance specification for UE positioning; Part 5: Test scenarios and assistance data | TS | 18.0.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.571-5/37571-5-i00.zip | The present document specifies the test scenarios and assistance data required for the conformance and minimum performance tests for FDD or TDD mode of UTRA, E-UTRA and NR for the User Equipment (UE) that supports one or more of the defined positioning methods. For UTRA these are Assisted Global Positioning System (A-GPS) and Assisted Global Navigation Satellite System (A-GNSS). For E-UTRA these are A-GNSS, Observed Time Difference of Arrival (OTDOA), Enhanced Cell ID (ECID), Wireless Local Area Network (WLAN), Metropolitan Beacon Systems (MBS), Bluetooth, NR Enhanced Cell-ID (NR-ECID), Multiple-Round Trip Time (Multi-RTT), Downlink Angle-of-Departure (DL-AoD) and Downlink Time Difference Of Arrival (DL-TDOA). For NR these are A-GNSS, Observed Time Difference of Arrival (LTE) (OTDOA (LTE)), Enhanced Cell ID (LTE) (ECID (LTE)), Wireless Local Area Network (WLAN), Metropolitan Beacon Systems (MBS) and Bluetooth.
The present document also specifies the GNSS scenario files for the test scenarios defined in TS 36.508 for V2X and aerial testing. |
37.579-5 | Mission Critical (MC) services; Part 5: Abstract test suite (ATS) | TS | 18.2.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.579-5/37579-5-i20.zip | The present document specifies the protocol and signalling conformance testing in TTCN-3 for the Mission Critical services defined by 3GPP.
The following TTCN test specification and design considerations can be found in the present document:
- the test system architecture;
- the overall test suite structure;
- the test models and ASP definitions;
- the test methods and usage of communication ports definitions;
- the test configurations;
- the design principles and assumptions;
- TTCN styles and conventions;
- the partial Implementation eXtra Information for Testing (IXIT) proforma;
- the test suites.
The Abstract Test Suites designed in the document are based on the test cases specified in 3GPP TS 37.579-2 [3], TS 37.579-6 [59] and TS 37.579-7 [60].
The applicability of the individual test cases is specified in the test ICS proforma specification in 3GPP TS 37.579-4 [5]). Where appropriate the Abstract Test Suites belonging to the present specification may refer to other Abstract Test Suites e.g. 3GPP TS 36.523-3 [27] and TS 38.523-3 [72] for test requirements related to the 3GPP bearers which carry the Mission Critical services data.
The present document is valid for TTCN development for Mission Critical services clients' conformance tests according to 3GPP Releases starting from Release 14 up to the Release indicated on the cover page of the present document. |
37.718-00-00 | Rel-18 SUL Band combinations for SA NR Supplementary uplink (SUL), NSA NR SUL, NSA NR SUL with UL sharing from the UE perspective (ULSUP) | TR | 18.0.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.718-00-00/37718-00-00-i00.zip | The present document is a technical report for SA NR Supplementary uplink (SUL), NSA NR SUL and NSA NR SUL with UL sharing from the UE perspective (ULSUP) under Rel-18 time frame. The purpose is to gather the relevant background information and studies in order to address NR SUL for the Rel-18 bands/band combinations in Table 1-1 to Table 1-4.
Table 1-1: Release 18 SUL bands
Band number
UL
DL
Duplex mode
Table 1-2: Release 18 SA SUL band combinations
SA SUL band combination
REL independent from
CA_n1_SUL_n78-n81
Rel-15
CA_n3_SUL_n41-n80
Rel-15
CA_n41_SUL_n79-n98
Rel-15
CA_n79_SUL_n41-n98
Rel-15
CA_n41_SUL_n79-n95
Rel-15
CA_n79_SUL_n41-n95
Rel-15
CA_n8_SUL_n78-n81
Rel-15
SUL_n1-n81
Rel-15
SUL_n3-n84
Rel-15
SUL_n1-n89
Rel-15
SUL_n1-n80
Rel-15
SUL_n78-n89
Rel-15
CA_n78_SUL_n1-n81
Rel-15
CA_n78_SUL_n3-n84
Rel-15
CA_n78_SUL_n1-n89
Rel-15
CA_n78_SUL_n1-n80
Rel-15
SUL_n5-n84
Rel-15
SUL_n8-n84
Rel-15
CA_n5_n78-n84
Rel-15
CA_n78_n5-n84
Rel-15
CA_n1_n78-n89
Rel-15
CA_n3_n78-n84
Rel-15
CA_n8_n78-n84
Rel-15
CA_n78_n8-n84
Rel-15
Table 1-3: Release 18 NSA SUL band combinations
NSA SUL band combination
REL independent from
Table 1-4: Release 18 NSA SUL with ULSUP band combinations
NSA SUL with ULSUP band combination
REL independent from
This TR contains a general part and specific band combination part. The actual requirements are added to the corresponding technical specifications. |
37.718-11-11 | Rel-18 Dual Connectivity (DC) of 1 band LTE (1DL/1UL) and 1 NR band (1DL/1UL) | TR | 18.1.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.718-11-11/37718-11-11-i10.zip | The present document is a technical report for Dual Connectivity (DC) of 1 LTE band (1DL/1UL) and 1 NR band (1DL/1UL) under Rel-18 time frame.
The purpose is to gather the relevant background information and studies in order to address Dual Connectivity (DC) of 1 LTE band (1DL/1UL) and 1 NR band (1DL/1UL) for the Rel-18 band combinations in Table 1-1, 1-2, 1-3 and 1-4, including EN-DC and NE-DC combinations. The actual requirements are added to the corresponding technical specifications.
Table 1-1: Release 18 EN-DC of 1 LTE band (1DL/1UL) and 1 NR band (1DL/1UL) within FR1
DC combination
Uplink EN-DC configuration
DC_3(n)AA
DC_3(n)AA1
DC_8B_n78A
DC_8A_n78A
DC_8B_n78A
DC_3C_n28A
DC_3C_n28A
DC_1A_n26A
DC_1A_n26A
DC_3A_n26A
DC_3A_n26A
DC_3C_n26A
DC_3A_n26A
DC_3C_n26A
DC_7A_n26A
DC_7A_n26A
DC_7C_n26A
DC_7A_n26A
DC_7C_n26A
DC_28A_n20A
DC_28A_n20A
DC_1A_n1A
DC_1A_n1A1
DC_28A_n38A
DC_28A_n38A
DC_8A_n38A
DC_8A_n38A
DC_5A_n25A
DC_5A_n25A
DC_5A_n41A
DC_5A_n41A
DC_71A_n25A
DC_71A_n25A
DC_7A_n12A
DC_7A_n12A
DC_71A_n7A
DC_71A_n7A
DC_1A_n105A
DC_1A_n105A
DC_3A_n105A
DC_3A_n105A
DC_7A_n105A
DC_7A_n105A
DC_71A_n12A
DC_71A_n12A1
DC_5A_n28A
DC_5A_n28A
DC_14A_n41A
DC_14A_n41A
DC_40A_n3A
DC_40A_n3A
DC_40A_n7A
DC_40A_n7A
DC_20A_n40A
DC_20A_n40A
DC_8B_n1A
DC_8B_n1A
DC_41A_n79C
DC_41A_n79C
DC_28A_n105A
DC_28A_n105A1
NOTE 1: Only single switched UL is supported
Table 1-2: Release 18 EN-DC of 1 LTE band (1DL/1UL) and 1 NR band (1DL/1UL) including FR2
DC combination
Uplink EN-DC configuration
Table 1-3: Release 18 NE-DC of 1 LTE band (1DL/1UL) and 1 NR band (1DL/1UL) within FR1
DC combination
Uplink NE-DC configuration
DC_n40A_42A
DC_n40A_42C
DC_n40A_42D
DC_n40A_42A
Table 1-4: Release 18 NE-DC of 1 LTE band (1DL/1UL) and 1 NR band (1DL/1UL) including FR2
DC combination
Uplink NE-DC configuration |
37.718-11-21 | Rel-18 DC of x bands (x=1,2,3,4) LTE inter-band CA (xDL/1UL) and 2 bands NR inter-band CA (2DL/1UL) | TR | 18.0.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.718-11-21/37718-11-21-i00.zip | The present document is a technical report for Rel-18 DC of x bands (x=1,2,3,4) LTE inter-band CA (xDL/1UL) and 2 bands NR inter-band CA (2DL/1UL) under Rel-18 time frame. The purpose is to gather the relevant background information and studies to address DC band combinations of inter-band CA for LTE xDL/1UL (x=1,2,3,4) and inter-band CA for NR 2DL/1UL in Rel-18 as shown in Table 1-1.
Table 1-1: Release 18 Dual Connectivity band combination of LTE xDL/1UL (x=1,2,3,4) + inter-band NR 2DL/1UL
Combination
LTE X Bands (x=1,2,3,4) Combinations
NR 2 Bands Combinations
LTE 1 Band
Band x
CA_nY-nZ
LTE 2 Bands
CA_w-x
CA_nY-nZ
LTE 3 Band
CA_v-w-x
CA_nY-nZ
LTE 4 Bands
CA_u-v-w-x
CA_nY-nZ
This TR contains a general part and band-specific combination part. The actual requirements are added to the corresponding technical specifications. |
37.718-21-11 | Dual Connectivity of 2 bands LTE inter-band CA and 1 NR band | TR | 18.0.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.718-21-11/37718-21-11-i00.zip | The present document is a technical report for Dual Connectivity of 2 bands LTE inter-band CA (2DL/1UL) and 1 NR band (1DL/1UL) under Rel-18 time frame. The purpose is to gather the relevant background information and studies in order to address Dual connectivity (DC) band combinations of 3 different bands DL with 2 different bands UL (2 different LTE bands and 1 NR band) for the Rel-18 band combinations. The actual requirements are added to the corresponding technical specification. |
37.829 | High-power UE operation for fixed-wireless/vehicle-mounted use cases in LTE bands and NR bands for Rel-18 | TR | 18.0.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.829/37829-i00.zip | The present document is a technical report for release 17 and release 18 basket WI High-power UE operation for fixed-wireless/vehicle-mounted use cases in LTE bands and NR bands, based on WID in [9]. |
37.877 | Rel-18 downlink interruption for NR and EN-DC band combinations at dynamic Tx switching | TR | 18.0.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.877/37877-i00.zip | The present document is a technical report for WI “Rel-18 downlink interruption for NR and EN-DC band combinations at dynamic Tx Switching in Uplink” under Rel-18 time frame. The purpose is to gather the relevant background information and studies in order to address the band combinations requested for mandating no DL interruption to conduct dynamic Tx switching in uplink listed in Table 1-1.
Table 1-1: Band combinations requested for mandating no DL interruption
Configuration
Uplink configuration
CA_n1-n5-n78
CA_n1-n78, CA_n5-n78
CA_n3-n5-n78
CA_n3-n78, CA_n5-n78 |
37.878 | Rel-18 Band combinations for con-current operation of NR/LTE Uu bands/band combinations and one NR/LTE V2X PC5 band | TR | 18.0.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.878/37878-i00.zip | The present document is the Technical Report on TR on band combinations for con-current operation of NR/LTE Uu bands/band combinations and one NR/LTE V2X band in Release 18.
The purpose of the present document is to study the extension of the band combinations for V2X service to grow the NR V2X ecosystem. Operators propose new band combinations for con-current operation of NR/LTE Uu bands/band combinations and one NR/LTE V2X band. Whether to specify con-current operation of LTE/NR CA/DC band combinations and V2X band depends on requests in Rel-18. Specifically, the self-desensitization problem of con-current operation band combinations will be analysed including harmonics, IMD problem, etc.. Also the candidate solutions will be studied to solve the self-desensitization problem.
Table 1-1: Release 18 NR V2X band combinations
V2X Band combination
REL independent from
V2X_n3-n47
Rel-16
V2X_n34-n47
Rel-16
V2X_n3_47
Rel-16
V2X_n34_47
Rel-16
V2X_34_n47
Rel-16
Note: All band combinations in table 1-1 that are release independent from Rel-16 are optional |
37.890 | Feasibility Study on 6 GHz for LTE and NR in Licensed and Unlicensed Operations | TR | 0.23.0 | RP | https://www.3gpp.org/ftp/Specs/archive/37_series/37.890/37890-0n0.zip | |
37.900 | Radio Frequency (RF) requirements for Multicarrier and Multiple Radio Access Technology (Multi-RAT) Base Station (BS) | TR | 18.0.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.900/37900-i00.zip | The present document is the technical report for the work item on Multi-Standard Radio (MSR), which was approved at TSG RAN#41. The objective of the WI is to first identify relevant scenarios and then write an RF requirements specification that is applicable to Multi-Standard Radio (MSR) Base Station with multiple carriers and/or multiple 3GPP Radio Access Technologies (RAT). |
37.902 | Measurements of User Equipment (UE) radio performances for LTE/UMTS terminals; Total Radiated Power (TRP) and Total Radiated Sensitivity (TRS) test methodology | TR | 18.1.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.902/37902-i10.zip | The present document is a Technical Report of the Study Item for OTA TRP and TRS requirement of LTE terminals, which was approved at TSG RAN #55 [2]. The report provides the measurement procedure of Over The Air TRP and TRS requirements for LTE terminals. It will make a simple extension to the UE OTA TRP and TRS test methods TS34.114[3] for LTE UE with multiple receive antennas, without considering all of the aspects associated with spatial channels. The work should utilise the existing environments in TR25.914[4]. The results of the UE OTA test method with Head and Hand Phantoms study item can be considered later on once finalized. The report also provides some future extensions and work items after LTE TRP and TRS methods mature. |
37.910 | Study on self evaluation towards IMT-2020 submission | TR | 18.0.0 | RP | https://www.3gpp.org/ftp/Specs/archive/37_series/37.910/37910-i00.zip | This report presents the self evaluation results of 3GPP 5G SRIT and 5G NR RIT. |
37.911 | Study on self-evaluation towards the IMT-2020 submission of the 3GPP Satellite Radio Interface Technology | TR | 18.1.0 | RP | https://www.3gpp.org/ftp/Specs/archive/37_series/37.911/37911-i10.zip | The present document reports on the self-evaluation results for meeting the requirements defined by ITU in Report ITU-R M.2514 [2]. |
37.941 | Radio Frequency (RF) conformance testing background for radiated Base Station (BS) requirements | TR | 18.3.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.941/37941-i30.zip | The present document is the Technical Report for the Work Item on Over The Air (OTA) Base Station (BS) testing.
This Technical Report covers background information of OTA testing methods, measurement uncertainty and test tolerance values derivation for the radiated conformance testing requirements. This Technical Report covers radiated conformance testing requirements for the following BS types:
- Hybrid AAS BS as specified in AAS BS radiated testing specification TS 37.145-2 [4] for the following radio technologies:
- Hybrid AAS BS in single RAT UTRA operation, TDD
- Hybrid AAS BS in single RAT UTRA operation, FDD
- Hybrid AAS BS in single RAT E-UTRA operation
- Hybrid AAS BS in MSR operation implementing any of the above RATs, including NR operation.
- OTA AAS BS as specified in AAS BS radiated testing specification TS 37.145-2 [4] for the following radio technologies:
- OTA AAS BS in single RAT UTRA operation, FDD
- OTA AAS BS in single RAT E-UTRA operation
- OTA AAS BS in MSR operation implementing any of the above RATs, and/or NR.
- BS type 1-H in single RAT NR operation in FR1, as specified in NR BS radiated testing specification TS 38.141-2 [6],
- BS type 1-O in single RAT NR operation in FR1, as specified in NR BS radiated testing specification TS 38.141-2 [6],
- BS type 2-O in single RAT NR operation in FR2, as specified in NR BS radiated testing specification TS 38.141-2 [6].
Generic term "BS" is used to refer to any of these BS types, unless otherwise stated.
This 3GPP external Technical Report consolidates the OTA measurement related information originating from multiple AAS BS and NR BS internal technical reports. This information is needed to supplement the BS radiated testing specifications as a single, 3GPP external technical report, such that the information can be referred to from external specifications and bodies.
The NR BS specification refers to two frequency ranges, FR1 and FR2. The AAS BS specification is only applicable for operating bands within FR1. Thus, sections in this report referring to FR2 should be considered as applicable to NR only. |
37.976 | Measurement of radiated performance for Multiple Input Multiple Output (MIMO) and multi-antenna reception for High Speed Packet Access (HSPA) and LTE terminals | TR | 18.0.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.976/37976-i00.zip | The present document is the technical report for the study item on MIMO OTA, which was approved at TSG RAN#43 [2]. The scope of the SI is to define a 3GPP methodology for measuring the radiated performance of multiple antenna reception and MIMO receivers in the UE. The test methodology should be relevant for HSPA and LTE technologies, with particular focus on handheld devices and devices embedded in laptop computers. |
37.977 | Universal Terrestrial Radio Access (UTRA) and Evolved Universal Terrestrial Radio Access (E-UTRA); Verification of radiated multi-antenna reception performance of User Equipment (UE) | TR | 18.0.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.977/37977-i00.zip | The present document is the technical report for the work item on MIMO OTA, which was approved at TSG RAN#55 [13]. The scope of the WI is to define a 3GPP methodology or set of comparable methodologies for measuring the radiated performance of multiple antenna reception and MIMO receivers in the UE. The test methodology should be relevant for HSPA and LTE technologies, with particular focus on handheld devices and devices embedded in laptop computers.
RAN WG4 has been working on the study item "Measurement of radiated performance for MIMO and multi-antenna reception for HSPA and LTE terminals" with the objective to define a test methodology for measuring the radiated performance of MIMO and multi-antenna UE reception in UMTS and LTE.
RAN4 has done sufficient work to be confident that the definition of a meaningful test methodology is feasible; however RAN4 does not have sufficient evidence yet to conclude on a single test methodology that would fulfil all requirements for standardisation, and the standardisation of multiple test methodologies may be one eventual outcome, with a view to avoid differences in the decision of what is a "good" or "bad" device from the radiated receiver performance perspective. |
37.985 | Overall description of Radio Access Network (RAN) aspects for Vehicle-to-everything (V2X) based on LTE and NR | TR | 18.0.0 | R1 | https://www.3gpp.org/ftp/Specs/archive/37_series/37.985/37985-i00.zip | The present document provides an overall description of the features introduced by 3GPP to LTE and NR in support of V2X services, starting from Rel-14. The purpose of this TR is to give an overview across the RAN specifications of how the features have been designed, and how they operate together. This document addresses LTE V2X and NR V2X via both sidelink, i.e. the PC5 interfaces, and via the cellular uplink/downlink, i.e. the Uu interfaces. It covers V2V, V2I/N, and V2P, as well as the eNB/gNB, UE, and RSU nodes. The intention is to provide descriptions at approximately the Stage 2 level of detail, and thus references are provided to RAN specifications for the reader to obtain precise details.
The document is a 'living' document, i.e. it is permanently updated and presented to TSG-RAN meetings. |
38.101-1 | NR; User Equipment (UE) radio transmission and reception; Part 1: Range 1 Standalone | TS | 18.10.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.101-1/38101-1-ia0.zip | |
38.101-2 | NR; User Equipment (UE) radio transmission and reception; Part 2: Range 2 Standalone | TS | 18.10.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.101-2/38101-2-ia0.zip | |
38.101-3 | NR; User Equipment (UE) radio transmission and reception; Part 3: Range 1 and Range 2 Interworking operation with other radios | TS | 18.10.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.101-3/38101-3-ia0.zip | |
38.101-4 | NR; User Equipment (UE) radio transmission and reception; Part 4: Performance requirements | TS | 18.8.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.101-4/38101-4-i80.zip | The present document establishes the minimum performance requirements for NR User Equipment (UE). |
38.108 | NR; Satellite Access Node radio transmission and reception | TS | 18.7.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.108/38108-i70.zip | |
38.104 | NR; Base Station (BS) radio transmission and reception | TS | 18.10.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.104/38104-ia0.zip | |
38.106 | NR repeater radio transmission and reception | TS | 18.9.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.106/38106-i90.zip | |
38.101-5 | NR; User Equipment (UE) radio transmission and reception; Part 5: Satellite access Radio Frequency (RF) and performance requirements | TS | 18.10.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.101-5/38101-5-ia0.zip | |
38.113 | NR; Base Station (BS) ElectroMagnetic Compatibility (EMC) | TS | 18.5.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.113/38113-i50.zip | The present document covers the assessment of NR and NR with NB-IoT in-band operation Base Station (BS) and ancillary equipment in respect of Electromagnetic Compatibility (EMC).
The present document specifies the applicable requirements, procedures, test conditions, performance assessment and performance criteria for NR and NR with NB-IoT in-band operation base stations and associated ancillary equipment in the following categories:
- BS equipped with antenna connectors or TAB connectors which are possible to be terminated during EMC testing, meeting the BS type 1-C and BS type 1-H RF requirements of TS 38.104 [2], with conformance demonstrated by compliance to TS 38.141-1 [3].
- BS not equipped with antenna connectors nor TAB connectors, i.e. with antenna elements radiating during the EMC testing, meeting the BS type 1-O and BS type 2-O RF requirements of TS 38.104 [2], with conformance demonstrated by compliance to TS 38.141-2 [4].
Technical requirements related to the antenna and TAB connectors are not included in the present document. These are found in the relevant NR BS product standards TS 38.104 [2], 3GPP TS 38.141-1[3], and 3GPP TS 38.141-2 [4].
The environment classification used in the present document refers to the residential, commercial and light industrial environment classification used in IEC 61000‑6-1 [7], IEC 61000-6-3 [8] and IEC 61000-6-8 [33].
The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus at residential, commercial and light industrial environments. The levels, however, do not cover extreme cases which may occur in any location but with low probability of occurrence. |
38.114 | NR; Repeaters ElectroMagnetic Compatibility (EMC) | TS | 18.4.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.114/38114-i40.zip | The present document covers the assessment of NR repeater, network-controlled repeater and ancillary equipment in respect of Electromagnetic Compatibility (EMC). For network-controlled repeater (NCR), requirements for NCR-Fwd and NCR-MT apply.
The present document specifies the applicable requirements, procedures, test conditions, performance assessment and performance criteria for NR repeater, NCR and associated ancillary equipment in the following categories:
- NR repeater equipped with antenna connectors which are possible to be terminated during EMC testing, meeting the repeater type 1-C RF requirements of TS 38.106 [2], with conformance demonstrated by compliance to TS 38.115-1 [3].
- NR repeater not equipped with antenna connectors, i.e. with antenna elements radiating during the EMC testing, meeting the repeater type 2-O RF requirements of TS 38.106 [2], with conformance demonstrated by compliance to TS 38.115-2 [4].
- NCR equipped with antenna connectors or TAB connectors which are possible to terminated during EMC testing, meeting the NCR-Fwd/MT type 1-C and type 1-H RF requirements of TS 38.106 [2], with conformance demonstrated by compliance to TS38.115-1[3].
- NCR not equipped with antenna connectors, i.e. with antenna elements radiating during the EMC testing, meeting the NCR-Fwd/MT type 2-O RF requirements of TS 38.106 [2], with conformance demonstrated by compliance to TS38.115-2[4].
The environment classification used in the present document refers to the residential, commercial and light industrial environment classification used in IEC 61000‑6-1 [6], IEC 61000-6-3 [7] and IEC 61000-6-8 [24].
The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus at residential, commercial and light industrial environments. The levels, however, do not cover extreme cases which may occur in any location but with low probability of occurrence. |
38.115-1 | NR; Repeater conformance testing - Part 1: Conducted conformance testing | TS | 18.9.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.115-1/38115-1-i90.zip | |
38.115-2 | NR; Repeater conformance testing - Part 2: Radiated conformance testing | TS | 18.5.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.115-2/38115-2-i50.zip | The present document specifies the Radio Frequency (RF) test methods and conformance requirements for RF Repeater type 2-O and network controlled repeater (NCR) type 1-H and 2-O. These have been derived from, and are consistent with the radiated requirements for Repeater type 2-O and network controlled repeater (NCR) type 1-H and 2-O in Repeater specification defined in TS 38.106 [2].
RF Repeater type 1-C and NCR type 1-C only have conducted requirements so they does not require compliance to this specification.
NCR type 1- H has both conducted and radiated requirements so it requires compliance to this specification and TS 38.115-1 [23].
RF Repeater type 2-O and NCR type 2-O have only radiated requirements so they require compliance to this specification only. |
38.124 | NR; Electromagnetic compatibility (EMC) requirements for mobile terminals and ancillary equipment | TS | 18.1.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.124/38124-i10.zip | The present document establishes the essential EMC requirements for "3rd generation" digital cellular mobile terminal equipment and ancillary accessories in combination with a 3GPP NR user equipment (UE).
The equipment conforming to the requirements laid out in the present document and used in its intended electromagnetic environment in accordance with the manufacturer's instructions
- shall not generate electromagnetic disturbances at a level which may interfere with the intended operation of other equipment;
- has an adequate level of intrinsic immunity to electromagnetic disturbances to operate as intended;
The present document specifies the applicable EMC tests, methods of measurement, frequency ranges, applicable limits and minimum performance criteria for all types of NR UE(s) and their accessories. NR base station equipment operating within network infrastructure is outside the scope of the present document. However, the present document does cover mobile and portable equipment that is intended to be operated in a fixed location while connected to the AC mains. NR base station equipment operating within network infrastructure is covered by the technical specification TS 38.113 [2].
Requirements for the radiated emission from the enclosure port of integral antenna equipment and ancillaries are included in the present document. Technical specifications for conducted emissions from the antenna connector are found in the 3GPP specifications for the radio interface of NR UE, e.g. TS 38.101-1 [3], for the effective use of the radio spectrum.
Requirements for the radiated emissions from the enclosure port and ancillaries cover the following case:
- UE equipment supporting operations in a frequency range for which antenna connectors are available (i.e. for operations in FR1 as defined in e.g. TS 38.101-1 [3] for the radio interface).
The immunity requirements are selected to ensure an adequate level of compatibility for apparatus in residential, commercial, light industrial and vehicular environments. The levels however, do not cover extreme cases, which may occur in any location but with low probability of occurrence.
Compliance of radio equipment to the requirements of the present document does not signify compliance to any requirement related to the use of the equipment (i.e. licensing requirements).
Compliance to the requirements of the present document does not signify compliance to any safety requirement. However, any temporary or permanent unsafe condition caused by EMC is considered as non-compliance. |
38.133 | NR; Requirements for support of radio resource management | TS | 18.10.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.133/38133-ia0.zip | |
38.141-1 | NR; Base Station (BS) conformance testing Part 1: Conducted conformance testing | TS | 18.10.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.141-1/38141-1-ia0.zip | |
38.141-2 | NR; Base Station (BS) conformance testing Part 2: Radiated conformance testing | TS | 18.10.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.141-2/38141-2-ia0.zip | |
38.151 | NR; User Equipment (UE) Multiple Input Multiple Output (MIMO) Over-the-Air (OTA) performance requirements | TS | 18.4.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.151/38151-i40.zip | The present document establishes the Multiple Input Multiple Output (MIMO) Over-the-Air (OTA) performance requirements for NR UEs operating on frequency Range 1 and frequency rang 2, for NR standalone (SA) and NR non-standalone (NSA) operation mode. The corresponding test methodologies are also presented in the Annex of this Technical Specification. |
38.161 | NR; User Equipment (UE) TRP (Total Radiated Power) and TRS (Total Radiated Sensitivity) requirements; Range 1 Standalone and Range 1 Interworking operation with other radios | TS | 18.3.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.161/38161-i30.zip | |
38.171 | NR; Requirements for support of Assisted Global Navigation Satellite System (A-GNSS) | TS | 18.0.1 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.171/38171-i01.zip | |
38.174 | NR; Integrated Access and Backhaul (IAB) radio transmission and reception | TS | 18.8.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.174/38174-i80.zip | |
38.175 | NR; Integrated Access and Backhaul (IAB) Electromagnetic Compatibility (EMC) | TS | 18.1.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.175/38175-i10.zip | The present document covers the assessment for NR Integrated access and backhaul (IAB) node and associated ancillary equipment in respect of Electromagnetic Compatibility (EMC).
The present document specifies the applicable test conditions, performance assessment and performance criteria for NR Integrated access and backhaul (IAB) node and associated ancillary equipment.
Technical requirements related to the antenna and TAB connectors are not included in the present document. These are found in the relevant product standards [2, 24, 25].
The environment classification used in the present document refers to the residential, commercial and light industrial environment classification used in IEC 61000-6-1 [4], IEC 61000-6-3 [5] and IEC 61000-6-8 [26].
The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus at residential, commercial and light industrial environments. The levels, however, do not cover extreme cases which may occur in any location but with low probability of occurrence. |
38.176-1 | NR; Integrated Access and Backhaul (IAB) conformance testing; Part 1: Conducted conformance testing | TS | 18.8.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.176-1/38176-1-i80.zip | |
38.176-2 | NR; Integrated Access and Backhaul (IAB) conformance testing; Part 2: Radiated conformance testing | TS | 18.8.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.176-2/38176-2-i80.zip | |
38.181 | NR; Satellite Access Node conformance testing | TS | 18.6.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.181/38181-i60.zip | |
38.201 | NR; Physical layer; General description | TS | 18.0.0 | R1 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.201/38201-i00.zip | |
38.202 | NR; Services provided by the physical layer | TS | 18.4.0 | R1 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.202/38202-i40.zip | The present document is a technical specification of the services provided by the physical layer of 5G-NR to upper layers. |
38.211 | NR; Physical channels and modulation | TS | 18.7.0 | R1 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.211/38211-i70.zip | |
38.212 | NR; Multiplexing and channel coding | TS | 18.7.0 | R1 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.212/38212-i70.zip | |
38.213 | NR; Physical layer procedures for control | TS | 18.7.0 | R1 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.213/38213-i70.zip | |
38.214 | NR; Physical layer procedures for data | TS | 18.7.0 | R1 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.214/38214-i70.zip | |
38.215 | NR; Physical layer measurements | TS | 18.4.0 | R1 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.215/38215-i40.zip | |
38.300 | NR; NR and NG-RAN Overall description; Stage-2 | TS | 18.6.0 | R2 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.300/38300-i60.zip | The present document provides an overview and overall description of the NG-RAN and focuses on the radio interface protocol architecture of NR connected to 5GC (E-UTRA connected to 5GC is covered in the 36 series). Details of the radio interface protocols are specified in companion specifications of the 38 series. |
38.304 | NR; User Equipment (UE) procedures in Idle mode and in RRC Inactive state | TS | 18.4.0 | R2 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.304/38304-i40.zip | The present document specifies the Access Stratum (AS) part of the UE procedures in RRC_IDLE state (also called Idle mode) and RRC_INACTIVE state. The non-access stratum (NAS) part of Idle mode procedures and processes is specified in TS 23.122 [9].
The present document specifies the model for the functional division between the NAS and AS in a UE.
The present document applies to all UEs that support at least NR Radio Access, including multi-RAT UEs as described in 3GPP specifications, in the following cases:
- When the UE is camped on a NR cell;
- When the UE is searching for a cell to camp on;
NOTE: When the UE is camped on or searching for a cell to camp on belonging to other RATs, the UE behaviour is described in the specifications of the other RATs. |
38.305 | NG Radio Access Network (NG-RAN); Stage 2 functional specification of User Equipment (UE) positioning in NG-RAN | TS | 18.6.0 | R2 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.305/38305-i60.zip | The present document specifies the stage 2 of the UE Positioning function of NG-RAN which provides the mechanisms to support or assist the calculation of the geographical position of a UE. UE position knowledge can be used, for example, in support of Radio Resource Management functions, as well as location-based services for operators, subscribers, and third-party service providers. The purpose of this stage 2 specification is to define the NG-RAN UE Positioning architecture, functional entities and operations to support positioning methods. This description is confined to the NG-RAN Access Stratum. It does not define or describe how the results of the UE position calculation can be utilised in the Core Network (e.g., LCS) or in NG-RAN (e.g., RRM).
UE Positioning may be considered as a network-provided enabling technology consisting of standardised service capabilities that enable the provision of location applications. The application(s) may be service provider specific. The description of the numerous and varied possible location applications which are enabled by this technology is outside the scope of the present document. However, clarifying examples of how the functionality being described may be used to provide specific location services may be included.
This stage 2 specification covers the NG-RAN positioning methods, state descriptions, and message flows to support UE Positioning.
This stage 2 specification also covers ranging and sidelink positioning in in-coverage and out-of-coverage of NG-RAN using NR PC5 interface. |
38.306 | NR; User Equipment (UE) radio access capabilities | TS | 18.6.0 | R2 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.306/38306-i60.zip | The present document defines the NR UE Radio Access Capability Parameters. |
38.307 | NR; Requirements on User Equipments (UEs) supporting a release-independent frequency band | TS | 18.4.0 | R4 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.307/38307-i40.zip | |
38.314 | NR; Layer 2 measurements | TS | 18.0.0 | R2 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.314/38314-i00.zip | The present document contains the description and definition of the measurements performed by network or the UE that are transferred over the standardised interfaces in order to support NR radio link operations, radio resource management (RRM), network operations and maintenance (OAM), minimization of drive tests (MDT) and self-organising networks (SON).
Only the differences relative to TS 28.552 v16.2.0 [2] are specified in this specification. |
38.321 | NR; Medium Access Control (MAC) protocol specification | TS | 18.6.0 | R2 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.321/38321-i60.zip | The present document specifies the NR MAC protocol. |
38.322 | NR; Radio Link Control (RLC) protocol specification | TS | 18.2.0 | R2 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.322/38322-i20.zip | The present document specifies the NR Radio Link Control (RLC) protocol for the UE – NR radio interface. |
38.323 | NR; Packet Data Convergence Protocol (PDCP) specification | TS | 18.5.0 | R2 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.323/38323-i50.zip | The present document provides the description of the Packet Data Convergence Protocol (PDCP). |
38.331 | NR; Radio Resource Control (RRC); Protocol specification | TS | 18.6.0 | R2 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.331/38331-i60.zip | The present document specifies the Radio Resource Control protocol for the radio interface between UE and NG-RAN.
The scope of the present document also includes:
- the radio related information transported in a transparent container between source gNB and target gNB upon inter gNB handover;
- the radio related information transported in a transparent container between a source or target gNB and another system upon inter RAT handover.
- the radio related information transported in a transparent container between a source eNB and target gNB during E-UTRA-NR Dual Connectivity.
The RRC protocol is also used to configure the radio interface between an IAB-node and its parent node [2], and the radio interface between an NCR-node and gNB [2]. |
38.340 | NR; Backhaul Adaptation Protocol (BAP) specification | TS | 18.2.0 | R2 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.340/38340-i20.zip | The present document provides description of the Backhaul Adaptation Protocol (BAP). |
38.351 | NR; Sidelink Relay Adaptation Protocol (SRAP) Specification | TS | 18.4.0 | R2 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.351/38351-i40.zip | The present document provides description of the Sidelink Relay Adaptation Protocol (SRAP). |
38.355 | NR; Sidelink Positioning Protocol (SLPP); Protocol Specification | TS | 18.6.0 | R2 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.355/38355-i60.zip | The present document specifies the Sidelink Positioning Protocol (SLPP) for the interface between UEs and between UE and LMF. |
38.401 | NG-RAN; Architecture description | TS | 18.6.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.401/38401-i60.zip | The present document describes the overall architecture of the NG-RAN, including interfaces NG, Xn and F1 interfaces and their interaction with the radio interface. |
38.410 | NG-RAN; NG general aspects and principles | TS | 18.3.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.410/38410-i30.zip | The present document is an introduction to the 3GPP TS 38.41x series of technical specifications that define the NG interface for the interconnection of an NG-RAN node to the 5GC (5G Core Network). |
38.411 | NG-RAN; NG layer 1 | TS | 18.0.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.411/38411-i00.zip | The present document specifies the standards allowed to implement layer 1 on the NG interface.
The specification of transmission delay requirements and O&M requirements are not in the scope of the present document.
In the following, 'layer 1' and 'physical layer' are assumed to be synonymous. |
38.412 | NG-RAN; NG signalling transport | TS | 18.1.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.412/38412-i10.zip | The present document specifies the standards for signalling transport to be used across NG interface. NG interface is a logical interface between the NG-RAN and the 5GC. The present document describes how the NGAP signalling messages are transported over NG. |
38.413 | NG-RAN; NG Application Protocol (NGAP) | TS | 18.6.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.413/38413-i60.zip | The present document specifies the radio network layer signalling protocol for the NG interface. The NG Application Protocol (NGAP) supports the functions of the NG interface by signalling procedures defined in this document. NGAP is developed in accordance to the general principles stated in TS 38.401 [2] and TS 38.410 [3]. |
38.414 | NG-RAN; NG data transport | TS | 18.0.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.414/38414-i00.zip | The present document specifies the standards for user data transport protocols and related signalling protocols to establish user plane transport bearers over the NG interface. |
38.415 | NG-RAN; PDU session user plane protocol | TS | 18.2.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.415/38415-i20.zip | The present document specifies the PDU Session user plane protocol being used over the NG-U, Xn-U and N9 interfaces. Applicability to other interfaces is not precluded.
The present document also specifies the PDU Set Information user plane protocol being used over the NG-U, Xn-U, F1-U and N9 interfaces. Applicability to other interfaces is not precluded. |
38.420 | NG-RAN; Xn general aspects and principles | TS | 18.1.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.420/38420-i10.zip | The present document is an introduction to the TSG RAN TS 38.42x series of Technical Specifications that define the Xn interface. It is an interface for the interconnection of two NG-RAN nodes within the NG-RAN architecture (TS 38.401 [2]). |
38.421 | NG-RAN; Xn layer 1 | TS | 18.0.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.421/38421-i00.zip | The present document specifies the standards allowed to implement layer 1 on the Xn interface.
The specification of transmission delay requirements and O&M requirements are not in the scope of the present document.
In the following, 'layer 1' and 'physical layer' are assumed to be synonymous. |
38.422 | NG-RAN; Xn signalling transport | TS | 18.1.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.422/38422-i10.zip | The present document specifies the standards for signalling transport to be used across Xn interface. The Xn interface provides means for interconnecting two NG-RAN nodes. The Xn interface is a logical interface between two nodes of the NG-RAN. The present document describes how the XnAP signalling messages are transported over Xn. |
38.423 | NG-RAN; Xn Application Protocol (XnAP) | TS | 18.6.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.423/38423-i60.zip | The present document specifies the radio network layer signalling procedures of the control plane between NG-RAN nodes in NG-RAN. XnAP supports the functions of the Xn interface by signalling procedures defined in this document. XnAP is developed in accordance to the general principles stated in TS 38.401 [2] and TS 38.420 [3]. |
38.424 | NG-RAN; Xn data transport | TS | 18.0.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.424/38424-i00.zip | The present document specifies the standards for user data transport protocols and related signalling protocols to establish user plane transport bearers over the Xn interface. |
38.425 | NG-RAN; NR user plane protocol | TS | 18.1.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.425/38425-i10.zip | The present document specifies the NR user plane protocol functions used within NG-RAN and, for EN-DC and LTE UP-CP split within E-UTRAN. NR user plane protocol functions may reside in nodes terminating either the X2-U (for EN-DC) or the Xn-U or the F1-U interface. User plane protocol functions support both E-UTRA PDCP and NR PDCP. |
38.455 | NG-RAN; NR Positioning Protocol A (NRPPa) | TS | 18.6.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.455/38455-i60.zip | The present document specifies the control plane radio network layer signalling procedures between a NG-RAN node and the LMF. NRPPa supports the concerned functions by signalling procedures defined in this document. |
38.460 | NG-RAN; E1 general aspects and principles | TS | 18.0.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.460/38460-i00.zip | See TS 37.480 [8]. |
38.461 | NG-RAN; E1 layer 1 | TS | 18.0.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.461/38461-i00.zip | See TS 37.481 [2]. |
38.462 | NG-RAN; E1 signalling transport | TS | 18.0.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.462/38462-i00.zip | See TS 37.482 [13]. |
38.463 | NG-RAN; E1 Application Protocol (E1AP) | TS | 18.0.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.463/38463-i00.zip | See TS 37.483 [40]. |
38.470 | NG-RAN; F1 general aspects and principles | TS | 18.5.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.470/38470-i50.zip | The present document is an introduction to the 3GPP TS 38.47x series of technical specifications that define the F1 interface. The F1 interface provides means for interconnecting a gNB-CU and a gNB-DU of a gNB within an NG-RAN, or for interconnecting a gNB-CU and a gNB-DU of an en-gNB within an E-UTRAN. |
38.471 | NG-RAN; F1 layer 1 | TS | 18.0.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.471/38471-i00.zip | The present document specifies the standards allowed to implement Layer 1 on the F1 interface. The F1 interface provides means for interconnecting a gNB-CU and a gNB-DU of a gNB within an NG-RAN, or for interconnecting a gNB-CU and a gNB-DU of an en-gNB within an E-UTRAN.
The specification of transmission delay requirements and O&M requirements are not in the scope of the present document.
In the following 'Layer 1' and ‘Physical Layer’ are assumed to be synonymous. |
38.472 | NG-RAN; F1 signalling transport | TS | 18.1.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.472/38472-i10.zip | The present document specifies the standards for Signalling Transport to be used across the F1 interface. The F1 interface provides means for interconnecting a gNB-CU and a gNB-DU of a gNB within an NG-RAN, or for interconnecting a gNB-CU and a gNB-DU of an en-gNB within an E-UTRAN. The present document describes how the F1AP signalling messages are transported over F1. |
38.473 | NG-RAN; F1 Application Protocol (F1AP) | TS | 18.6.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.473/38473-i60.zip | The present document specifies the 5G radio network layer signalling protocol for the F1 interface. The F1 interface provides means for interconnecting a gNB-CU and a gNB-DU of a gNB within an NG-RAN, or for interconnecting a gNB-CU and a gNB-DU of an en-gNB within an E-UTRAN. The F1 Application Protocol (F1AP) supports the functions of F1 interface by signalling procedures defined in the present document. F1AP is developed in accordance to the general principles stated in TS 38.401 [4] and TS 38.470 [2]. |
38.474 | NG-RAN; F1 data transport | TS | 18.0.0 | R3 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.474/38474-i00.zip | The present document specifies the standards for user data transport protocols and related signalling protocols to establish user plane transport bearers over the F1 interface. The F1 interface provides means for interconnecting a gNB-CU and a gNB-DU of a gNB within an NG-RAN, or for interconnection a gNB-CU and a gNB-DU of an en-gNB within an E-UTRAN. |
38.508-1 | 5GS; User Equipment (UE) conformance specification; Part 1: Common test environment | TS | 18.7.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.508-1/38508-1-i70.zip | |
38.508-2 | 5GS; User Equipment (UE) conformance specification; Part 2: Common Implementation Conformance Statement (ICS) proforma | TS | 18.7.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.508-2/38508-2-i70.zip | The present document provides the Implementation Conformance Statement (ICS) proforma for 5G New Radio (NR) User Equipment (UE), in compliance with the relevant requirements.
Special conformance testing functions can be found in 3GPP TS 38.509 [12] and 3GPP TS 36.509 [14] and the common test environments are included in 3GPP TS 38.508-1 [11] and 3GPP TS 36.508 [13].
The present document is valid for UE implemented according to 3GPP Releases starting from Release 15 up to the Release indicated on the cover page of the present document. |
38.509 | 5GS; Special conformance testing functions for User Equipment (UE) | TS | 18.0.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.509/38509-i00.zip | The present document defines for User Equipment (UE) those special functions and their activation/deactivation methods that are required in the UE for conformance testing purposes when the UE is connected to the 5G System (5GS) via its radio interface(s).
The document also describes the operation of these special functions when the 5GS capable UEs are connected via a non-5GS system e.g. E-UTRA FDD or TDD system.
Depending on the 5GS system's architecture some relevant for the UE for conformance testing special functions may be defined in TS 36.509 [6]. |
38.521-1 | NR; User Equipment (UE) conformance specification; Radio transmission and reception; Part 1: Range 1 standalone | TS | 18.7.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.521-1/38521-1-i70.zip | |
38.521-2 | NR; User Equipment (UE) conformance specification; Radio transmission and reception; Part 2: Range 2 standalone | TS | 18.7.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.521-2/38521-2-i70.zip | The present document specifies the measurement procedures for the conformance test of the user equipment (UE) that contain RF characteristics for frequency Range 2 as part of the 5G-NR.
The requirements are listed in different clauses only if the corresponding parameters deviate. More generally, tests are only applicable to those mobiles that are intended to support the appropriate functionality. To indicate the circumstances in which tests apply, this is noted in the "definition and applicability" part of the test.
For example only Release 15 and later UE declared to support 5G-NR shall be tested for this functionality. In the event that for some tests different conditions apply for different releases, this is indicated within the text of the test itself. |
38.521-3 | NR; User Equipment (UE) conformance specification; Radio transmission and reception; Part 3: Range 1 and Range 2 Interworking operation with other radios | TS | 18.7.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.521-3/38521-3-i70.zip | The present document specifies the measurement procedures for the conformance test of the user equipment (UE) that contain RF characteristics for carrier aggregation between Range 1 and Range 2 and additional requirements for EN-DC, NE-DC and NGEN-DC.
The requirements are listed in different clauses only if the corresponding parameters deviate. More generally, tests are only applicable to those mobiles that are intended to support the appropriate functionality. To indicate the circumstances in which tests apply, this is noted in the "definition and applicability" part of the test.
For example only Release 15 and later UE declared to support 5G-NR shall be tested for this functionality. In the event that for some tests different conditions apply for different releases, this is indicated within the text of the test itself. |
38.521-4 | NR; User Equipment (UE) conformance specification; Radio transmission and reception; Part 4: Performance | TS | 18.7.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.521-4/38521-4-i70.zip | The present document specifies the measurement procedures for the conformance test of the user equipment (UE) that contain performance requirements as part of 5G-NR.
The requirements are listed in different clauses only if the corresponding parameters deviate. More generally, tests are only applicable to those mobiles that are intended to support the appropriate functionality. To indicate the circumstances in which tests apply, this is noted in the "definition and applicability" part of the test.
For example only Release 15 and later UE declared to support 5G-NR shall be tested for this functionality. In the event that for some tests different conditions apply for different releases, this is indicated within the text of the test itself. |
38.521-5 | NR; User Equipment (UE) conformance specification; Radio transmission and reception; Part 5: Satellite access Radio Frequency (RF) and performance | TS | 18.6.0 | R5 | https://www.3gpp.org/ftp/Specs/archive/38_series/38.521-5/38521-5-i60.zip | The present document specifies the measurement procedures for the conformance test of the NR User Equipment (UE) supporting satellite access operation that contains RF and Performance requirements. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.