Filename
stringlengths
22
64
Paragraph
stringlengths
8
5.57k
Processed_What_triggers_a_radio_AGN?_The_intriguing_case_of_.txt
where Lmech is the jet mechanical power, which is related to the 1.4 GHz radio continuum (Cavagnolo et al. 2010), and Lrad is the radiative power as estimated from the [OIII] oxygen lumi- nosity (Heckman et al. 2004). The Eddington luminosity is de- fined as LEdd = 1.3 × 1038MBH/M⊙ erg s−1(Best & Heckman, 2012). In the case of PKS B1718–649, knowing that F[O III] = 5.0 × 10−14 erg s−1 cm−2(Filippenko, 1985) and MBH = 4.1 × 108 M⊙(Willett et al., 2010), we determine Lrad = 8×1043 erg s−1 and Lmech = 1×1044 erg s−1. Hence, λ ≈ 0.003, even though the mea- surement is affected by the scatter in the relation between the 1.4 GHz radio power and the mechanical luminosity. The value of λ we measured is in the range of values measured for the LERG population in the work by Best & Heckman (2012). This clas- sification of the source would be consistent with the idea that a merger or an interaction event did not trigger this radio source. We can investigate whether the radio nuclear activity PKS B1718–649 could be sustained by the infall of the H I clouds we detected in absorption. Given the uncertainty on the origin of the clouds, we can use different approaches. The most common analytical solution of a radiatively inefficient ac- cretion is the Bondi mechanism (Bondi, 1952). Even though it makes general, unrealistic assumptions on the conditions of the accreting gas, this solution allows us to roughly estimate an upper limit to the accretion rate into the AGN, simply from the radio properties of the source. Following the empirical rela- tion between the radio jet power and the Bondi power log Pj = (1.10±0.11)×log PB−1.91±0.20, measured by Balmaverde et al. (2008), we can estimate the mass accretion rate (PB = ˙MBondic2). In the case of PKS B1718–649, the radio jets are undetected in the VLBI observations (Tingay et al. 2002). The 3σ noise level of the observations sets an upper limit on the flux density to 20 mJy. Hence, the radio jet power is Pj . 2.3×1043 erg s−1 and the Bondi power is PB . 1.2 × 1045 erg s−1. Therefore we set an up- per limit to the accretion rate of PKS B1718–649 to . 0.02 M⊙ yr−1.
Processed_What_triggers_a_radio_AGN?_The_intriguing_case_of_.txt
If the clouds we detect in PKS B1718–649 were close to the radio source and involved in its accretion, the H I could have much higher temperatures than Tspin = 100 K, (see for example the case of PKS 1549–79, Holt et al. 2006). Assuming, Tspin ∼ 1000 K the column density of the absorption features would be ∼ 7 × 1020 cm−2 (similarly, the minimum mass of the inferred cloud would be: MH I & 105 M⊙). This agrees with the column density of the nuclear source measured from the X-ray spectrum: NH I ∼ 8 × 1020 cm−2 (Siemiginowska, private communication), thus the close proximity of the H I clouds to the radio source may not be excluded.
Processed_What_triggers_a_radio_AGN?_The_intriguing_case_of_.txt
We have presented new neutral hydrogen ATCA observations of the nearby young radio source PKS B1718–649. We detected a large H I disk, (MH I = 1.1 × 1010 M⊙) with radius R ∼ 29 kpc. The disk is warped in the inner regions and overall regularly ro- tating. In emission, we do not detect significant deviations from the regular rotation. There are no streams or radial motions in the disk which are currently bringing the cold gas close to the radio activity. At the edges of the disk, we detect slight asymme- tries, traces of a past merger or interaction event. This may have contributed in forming the settled disk, but is not related to the triggering of the radio activity. From the dynamical time of the H I disk, we dated the interaction event to more than 1×109 years ago. Since the radio source is very young (102 years), there is a significant time delay between the episode that formed the disk and the beginning of the radio activity. Even though the past in- teraction provided the galaxy of a massive reservoir of cold gas, the triggering of the radio activity must be attributed to another phenomenon, which let some amount of cold gas loose angu- lar momentum and fall into the SMBH, without perturbing the overall regular rotation of the disk.
Processed_What_triggers_a_radio_AGN?_The_intriguing_case_of_.txt
Allen, S. W., Dunn, R. J. H., Fabian, A. C., Taylor, G. B., & Reynolds, C. S.
Processed_What_triggers_a_radio_AGN?_The_intriguing_case_of_.txt
Kauffmann, G. & Heckman, T. M. 2009, MNRAS, 397, 135 Keel, W. C. & Windhorst, R. A. 1991, ApJ, 383, 135 Kormendy, J. & Kennicutt, Jr., R. C. 2004, ARA&A, 42, 603 Kunert-Bajraszewska, M., Labiano, A., Siemiginowska, A., & Guainazzi, M.
Processed_What_triggers_a_radio_AGN?_The_intriguing_case_of_.txt
In absorption, we detect two separate lines. Their kinetic properties, compared to the ones of the H I seen in emis- sion, suggest they may trace distinct clouds not reg- ularly rotating within the disk. The sensitivity and resolu- tion of the data does not allow us to determine their posi- tion, and different interpretations on their nature are possi- ble. The link between these clouds and the radio activity can- not be excluded. Different detailed studies of accretion mech- anisms (Gaspari et al. 2012, 2013; Hillel & Soker 2013) pre- dict that accretion into the black hole can occur through chaotic collisions of small clouds of cold gas. There are also other radio sources where several clouds of cold gas, similar to the ones of PKS B1718–649, are detected, as, for exam- ple, NGC 315 (Morganti et al. 2009) and 3C 236 (Struve et al. 2010). Galaxies B2 0258+35 (Shulevski et al. 2012) and Centaurus A (Struve et al. 2010), like PKS B1718–649, show a time delay between the formation of the H I disk and the trig- gering of the radio activity, and they may also have a complex H I structure below the overall regularly rotating disk. All these radio sources present an on-going radiatively inefficient mode of accretion. The neutral hydrogen in the form of small cold clouds, as the ones detected in PKS B1718–649, may play a crucial role in the triggering and fueling of this kind of radio sources.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
c(cid:13) Copyright owned by the author(s) under the terms of the Creative Commons Attribution-NonCommercial-ShareAlike Licence.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
In recent years, the I=1 two-pion system has attracted a lot of attention in lattice QCD. The increase in computational power has finally allowed to generate fully dynamical QCD gauge con- figurations at quark masses low enough for the rho resonance to be observed, promising a better understanding of complex hadron processes from first principles. Recent studies [1, 2, 3, 4] all use the de facto standard method, which is to apply Lüscher’s formula [5] or its extension to moving frames [6], in order to relate the finite-size energy spectrum to the infinite volume phase shifts. The main difficulty faced by this method is that one can only extract the phase shifts at a few energies on the lattice, making it difficult to reconstruct the continuous energy range and thus the physical parameters of the system, especially around the resonance.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
An alternative method has been recently introduced for the study of the nucleon-nucleon sys- tem [7] then successfully extended, in particular, to various baryon-baryon systems [8]. The method relies on the fact that the phase shifts can be obtained from the asymptotic behaviour of the Bethe- Salpeter (BS) wave functions. An effective energy-independent, non-local potential can then be introduced to account for the energy dependence of the BS wave functions, and as a result, the energy dependence of the phase shifts.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
This paper reports on our first attempt to apply this potential method to the I=1 two-pion system. The meson masses considered here do not allow for the rho meson to decay, the goal being to test the viability of the method in this channel before applying it to the study of the resonance.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
an eigenstate of QCD with the required quantum numbers. The BS wave function presents with an asymptotic behaviour [9] which allows to extract the scattering phase shift at the energy of the eigenstate, in exactly the same way as the wave function in quantum mechanics.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
From the approximate potential, we can obtain approximate BS wave functions at all energies below the inelastic threshold and extract phase shifts from them. The accuracy of the results thus depend on the convergence of the derivative expansion.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
The pion-pion I=1 channel contains both pion-pion scattering states and the rho meson. In the pion mass region we investigate (mp = 1.05 and 0.68 GeV), we expect the ground state to be the rho meson, the first excited state to be the pion-pion scattering state with the lowest non-zero momentum allowed on the lattice, and other eigenstates to have energies large enough to only consider the first two (N = 2).
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
x (cid:2) with a polarization taken parallel to that of the relative momentum of the pions, a = e3.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
Figure 2: Computation method for some contractions. Springs link pairs of points which are pro- jected one on the other by summing over stochastic noises. Open circles are explicit summations. Straight (resp. broken) arrows are direct (sequential) propagators.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
Fig. 2a shows an example. The propagators are contracted explicitely at the sink (upper part in the diagram) and implicitely at the source (lower part) by noise projection. In Fig. 1 appear rectangle- and triangle-like diagrams. They can be computed in the same way as the previous ex- ample using sequential propagators, cf. Fig. 2b. However, while the momentum can be introduced freely at the explicit summation (empty circle), sequential propagators have definite intermediate momenta. This means that for the wave functions, which requires all possible sink momenta q, we need to compute as many sequential propagators. To remedy this, we introduce for the wave functions another stochastic noise at the sink, cf. Fig. 2c, which allows to choose the two momenta at the sink independently of the computation of the propagators.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
The preliminary results presented here were computed using the N f = 2 + 1 full QCD gauge configurations of ILDG/JLDG generated by the CP-PACS and JLQCD Collaborations [10] on a 56 lattice with a RG improved gauge action at b = 2.05 and a O(a) improved Wilson quark 283 action with cSW = 1.628. The lattice spacing is a = 0.0685 fm which makes for a lowest non-zero momentum of p = 2p /L = 0.65 GeV. We compare our results on two sets of configurations with light quark hopping parameters k ud = 0.1347 and k ud = 0.1356, keeping k s = 0.1351 fixed.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
The configurations with k ud = 0.1347 have meson masses mp = 1.05 GeV and mr = 1.37 GeV. Those with k ud = 0.1356 have masses mp = 0.68 GeV and mr = 1.10 GeV. In both cases, mp + (2p /L)2, is significantly the lowest energy of two free pions in the center of mass frame, 2 larger than that of the rho meson at rest.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
The quark propagators are computed with temporal Dirichlet boundary condition. We use U (1) stochastic noises, 6 at the source and 20 at the sink. Wave functions are projected in the T −1 representation of the cubic group. Statistical errors are computed using the jackknife technique although 2-dimensional plots are shown without error bars for clarity.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
We have seen that the wave functions (2.2) on the eigenstates are obtained as combinations (p) and r , them- (3.3) of the wave functions computed with the interpolating source operators pp selves computed as sum of Wick contractions ("diagrams"). The combinations are obtained by diagonalization of the correlation matrix.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
pair propagating in the rectangle and triangle diagrams from t to t0 can be thought as forming a rho meson, which could explain why the two diagrams’ wave functions are similar and short-ranged.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
by saturation at large enough time separation. Taking pp dominant contribution as time separation increases is from the rectangle diagram.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
The first excited state’s wave function is shown Fig. 4 (right). We see that the dominant contribution is this time coming from the parallel diagram. The wave functions is obtained with a linear combination of the two source operators, which has for effect the cancellation of the peaked short-range contribution between the rectangle and triangle diagrams. However, while the signal from the ground state wave function is cancelled, the statistical noise remains and grows as eD E(t t0) with D E the energy difference between the two lowest eigenstates.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
An approximate potential is obtained by inverting the Schrödinger equation (2.3) with the BS wave functions computed on the lattice as input. The wave functions in Fig. 4 unfortunately do not allow such a computation. The ground state wave function (left) is sharply peaked around the origin, leading to huge discretization errors when taking finite-difference Laplacian operator. The first excited state wave function (right) is extremely noisy due to large energy separation between the two lowest eigenstates and the noise is further enhanced by taking the Laplacian.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
Using the fact that the main contribution to the first excited state wave function is from the parallel diagram and that the other diagrams should only contribute to the short-range part of the potential, we show in Fig. 5 the effective central potential computed using only the parallel dia- grams, on both sets of hopping parameters. We see that a simple Yukawa fit is in good agreement to the data even at surprisingly short range. The masses in the Yukawa fit are 1.53(9) GeV and 0.94(17) GeV, with corresponding rho masses of 1.37 GeV and 1.10 GeV, respectively.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
encountered difficulties in this particular setup. First, the ground state being the rho meson, the wave function is very short-ranged and the computation of the potential leads to large discretization errors. Then, while the first excited state is a scattering state and likely to be well described by a potential, it is difficult to extract due to the large energy difference.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
However, approaching the problem from a different perspective, the present results shed a new light on the qualitative understanding of the system. Furthermore, the above problems may be solved in the region where the rho meson is a resonance and not the ground state, since the scat- tering state will be simply extracted by saturation and the short-ranged component should become less important. In this case, the potential method could lead to competitive quantitative results. Further study at smaller pion masses will confirm or invalidate this expectation.
Processed_Pion-pion_interaction_in_the_I=1_channel.txt
Numerical computations in this work were carried out on SR16000 at YITP in Kyoto Uni- versity. We are also grateful for the authors and maintainers of CPS++ [11], of which a modified version is used for measurement done in this work.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
by the motion of the galaxy (Burns 1981; Eilek et al. 1984; O’Donoghue et al. 1990).
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
understanding the WAT structures (Eilek et al. 1984; Burns et al. 1994; Roettiger et al.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
sensitivity can study clusters to a much farther extent and can detect fainter X-ray signals.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
so that 1 arcsec corresponds to 0.96 kpc at z=0.0498, the redshift of the cluster.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
A journal of the XMM-Newton and Chandra observations of A3395 is given in Table 1.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
again using the selection criteria of PATTERN ≤ 12 (PATTERN ≤ 4) and FLAG = 0.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
removed. Finally 77 sources for MOS1, 67 for MOS2, and 44 sources for PN were detected.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
removal of point sources and after applying the smoothing function is shown in Figure 2.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
region by about ∼ 16.5(cid:48)(cid:48) which is equivalent to ∼ 16 kpc at the redshift of the cluster.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
A3395 was observed by A.D. Reid and R.W. Hunstead with ATCA on 1995 January 09.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
and relatively faint subclump of diffuse emission visible towards the west of the SW region.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
NE and W regions. None of the three regions in A3395 cluster show a circular symmetry.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
and A3391 (Tittley & Henriksen 2001), it appears to be a part of the supercluster network.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
region, show a flattening of the slope in all four detectors at a semi-major axis of ∼ 400(cid:48)(cid:48).
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
of the filament shows a significant hump above the background at the centre (Figure 6(e)).
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
whole cluster was divided into 139 boxes for XMM-Newton and only 42 boxes for Chandra.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
Chandra did not cover the outer parts of the cluster significantly due to smaller FOV.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
in the W component, the region joining the NE and SW parts and the filament regions.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
MHz (Reid 2000). The HT galaxy is located at the periphery of the W region of A3395.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
to, while that for the SW subcluster is slightly higher than, those from Donnelly et al.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
galaxies in this hump belong to either the SW or the W parts or to none of the subclusters.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
a hotter tail and a colder plume were formed in two different phases of ram-pressure stripping.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
Clusters hosting a WAT with bent lobes are known to be the sites of ongoing mergers.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
observation is missing flux and has not been used in the spectrum plot in Fig. 16.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
a Fx(0) = X-ray flux at the centre, β = −1/3(slope-0.5) and rc = core radius.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
et al. 1990). Results for all other regions are from Donnelly et al. (2001) alone.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
are shown using solid lines and the positions of discontinuities are shown with dotted lines.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
spectral analysis are given in §4.3, and the best fit parameters are shown here as insets.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
units shown in the bars alongside. Details of the spectral fittings are provided in §4.5.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
cm2 shown in the bars alongside. Details of the spectral fittings are provided in §4.5.
Processed_Intracluster_medium_of_the_merging_cluster_Abell_3.txt
cm−3 shown in the bars alongside. Details of the spectral fittings are provided in §4.5.
Processed_Southern_class_I_methanol_masers_at_36_and_44_GHz.txt
ABSTRACT The Australia Telescope Compact Array (ATCA) has been used for high angular resolu- tion imaging of 71 southern class I methanol maser sources quasi-simultaneously at 36 and 44 GHz. The data reveal a high level of morphological and kinematical complexity, and allow us to demonstrate associations, at arcsecond precision, of the class I maser emission with out- flows, expanding HII regions, dark clouds, shocks traced by the 4.5-µm emission and 8.0-µm filaments. More than 700 maser component features were found at each of the two methanol transitions, but with only 23 per cent recognisable at both transitions; the morphology of class I emission is much better revealed by our survey of both transitions, compared with either one alone. We found that the number of masers falls exponentially with the projected linear distance from the associated class II 6.7-GHz methanol maser. This distribution has a scale of 263±15 mpc, irrespective of the transition. The class I masers associated with OH masers were found to have a tendency to be more spread out, both spatially and in the veloc- ity domain. This is consistent with the expectation that such sources are more evolved. Apart from a small number of high-velocity components (which are largely blue-shifted and pre- dominantly seen at 36 GHz), the velocity distribution was found to be Gaussian, peaking near the systemic velocity of the region, which had been estimated as the middle of the velocity interval of the associated class II methanol maser at 6.7 GHz. The mean indicated a small, but significant blue shift asymmetry of −0.57 km s−1 (uncertainties are 0.06 and 0.07 km s−1 for the 36- and 44-GHz masers, respectively) with respect to the 6.7-GHz masers. The standard deviation of the velocity distribution was found to be 3.65±0.05 and 3.32±0.07 km s−1 for the 36- and 44-GHz masers, respectively. We also suggest a refined rest frequency value of 36169.238±0.011 MHz for the 4−1−30 E methanol transition.
Processed_Southern_class_I_methanol_masers_at_36_and_44_GHz.txt
class II masers which are pumped by infrared radiation (see also Sobolev & Deguchi 1994; Voronkov et al. 2006).
Processed_Southern_class_I_methanol_masers_at_36_and_44_GHz.txt
To date, a few hundred class I methanol maser sources are known, but the majority still have only single dish data (for more details, see the review by Voronkov et al. 2012). The major pub- lished interferometric surveys are those by Kurtz et al. (2004) and Cyganowski et al. (2009), which together provided maps for 56 mostly northern class I methanol masers at 44 GHz. Seven addi- tional 44-GHz masers were imaged by Kogan & Slysh (1998), but phase referencing was not used in their experiment making the ab- solute positions uncertain. The reported interferometric observa- tions of the 36-GHz methanol transition are scarce and limited to single source papers only (Sjouwerman et al. 2010; Voronkov et al. 2010a; Fish et al. 2011; Yusef-Zadeh et al. 2013). At the frequen- cies of these molecular transitions the beam size of a 20-m class single dish is comparable to the typical angular spread of the class I maser emission (e.g., Kurtz et al. 2004; Voronkov et al. 2006). Therefore, interferometric observations, which allow us to measure accurate positions (and also to correct for the beam atten- uation to the first order), are required even for meaningful detection statistics. A search for associations with other phenomena that are commonly observed in the crowded environment of high-mass star forming regions is another important application of interferometric observations.
Processed_Southern_class_I_methanol_masers_at_36_and_44_GHz.txt
The majority of the class I masers are believed to trace in- terface regions of outflows, although direct observational evidence of this has only been obtained at high angular resolution for a limited number of sources (e.g., Kurtz et al. 2004; Voronkov et al. 2006; Cyganowski et al. 2012). Also based on interferometric data, alternative scenarios have been demonstrated to occur in some sources, in particular the class I masers have been shown to arise due to cloud-cloud collisions (Sjouwerman et al. 2010) and due to interaction of expanding HII regions with the ambient molecular gas (Voronkov et al. 2010b; Cyganowski et al. 2012). The common feature of all these scenarios is the presence of shocked gas. Weak shocks are known to greatly enhance the methanol abundance by facilitating methanol release from dust grain mantles into the gas phase through heating (e.g., Hartquist et al. 1995; Gibb & Davis 1998; Garay et al. 2002a). At the same time, the shocks compress and heat up the gas, which is usually considered to be a favourable condition for the pumping of the class I methanol masers due to an increased rate of collisions between methanol and hydrogen molecules. Therefore, as discussed by Voronkov et al. (2010b), the class I masers should be treated as merely shock tracers, where shocks could be caused by a range of phenomena. It is worth noting that Yusef-Zadeh et al. (2013) suggested an alternative methanol production mechanism due to cosmic rays and molecular gas in- teractions. This mechanism is most likely specific to the inner few hundred pc of the Galaxy (known as the central molecular zone).
Processed_Southern_class_I_methanol_masers_at_36_and_44_GHz.txt
sion band in the Spitzer images. These features are also known as extended green objects (EGOs; Cyganowski et al. 2009) or ‘green fuzzies’ (Chambers et al. 2009) because of the colour usually used to represent the 4.5-µm emission in three-colour IRAC images. The excess of emission in this band is generally attributed to in- creased contribution from the emission of molecular hydrogen and carbon monoxide excited in shocks (e.g., Chambers et al. 2009; Cyganowski et al. 2009; De Buizer & Vacca 2010). Other notewor- thy structures often present in IRAC images include the 8.0-µm filaments and bubbles (e.g., Churchwell et al. 2006). This IRAC band contains emission features of polycyclic aromatic hydrocar- bons (PAHs), which often trace photodissociation regions (PDRs) around HII regions, although near hot stars the emission in this band may be dominated by thermal dust emission with little or no contribution from PAHs (e.g., Watson et al. 1998).
Processed_Southern_class_I_methanol_masers_at_36_and_44_GHz.txt
In this paper, we present an interferometric survey at both 36 and 44 GHz of 71 southern class I masers, and attempt to interpret the observed morphologies. These are the strongest and the most common class I maser transitions, which belong to two different transition series (see Voronkov et al. 2012). We also present a ba- sic statistical analysis of observed maser properties. Note that this is the largest interferometric survey of common class I methanol masers available to date, and the first of this kind in the south- ern hemisphere. In addition, this is the first observation at 36 GHz for the majority of our targets and the first high angular resolution study of a large number of 36-GHz masers.
Processed_Southern_class_I_methanol_masers_at_36_and_44_GHz.txt
Observations were made with the Australia Telescope Compact Ar- ray (ATCA) 2007 May 20-25 (project code C1642) using the hy- brid H214C array configuration. The most distant CA06 antenna (located about 4.5 km to the west of the other five antennas) was not used in this experiment. The remaning baselines had lengths ranging from 82 to 247 m corresponding to the synthesised beam sizes of about 7 and 6 arcsec at 36 and 44 GHz, respectively. The targets were drawn from Slysh et al. (1994), Val’tts et al. (2000) and Ellingsen (2005) and included essentially all sites of class I maser emission reported in the literature at the time of observa- 35◦, 71 unique targets in tions and located south of declination total. The exception was a well-known maser in NGC 6334I(N) al- ready imaged by Kogan & Slysh (1998) and later studied in detail by Brogan et al. (2009). It is worth noting, that since the time of our observations, a large number of new class I methanol masers have been found in this declination range in various single dish surveys (Chen et al. 2011; Voronkov et al. 2012; Chen et al. 2013).
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
We present and compare new types of algorithms for lattice QCD with staggered fermions in the limit of infinite gauge coupling. These algorithms are formulated on a discrete spatial lattice but with con- tinuous Euclidean time. They make use of the exact Hamiltonian, with the inverse temperature beta as the only input parameter. This formulation turns out to be analogous to that of a quantum spin system. The sign problem is completely absent, at zero and non-zero baryon density. We compare the performance of a continuous-time worm algorithm and of a Stochastic Series Expansion algorithm (SSE), which operates on equivalence classes of time-ordered interactions. Finally, we apply the SSE algorithm to a first exploratory study of two-flavor strong coupling lattice QCD, which is manageable in the Hamiltonian formulation because the sign problem can be controlled.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
c(cid:13) Copyright owned by the author(s) under the terms of the Creative Commons Attribution-NonCommercial-ShareAlike Licence.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
Lattice QCD with staggered fermions in the strong coupling limit (SC-LQCD) is a useful effective model of QCD, as it shares important features of QCD such as confinement and spontaneous chiral symmetry breaking and its restoration at a transition temperature Tc. One can study the nuclear potential as well as the phase diagram at non-zero baryon chemical potential µB [1]. These topics can not be properly addressed with conventional, determinant-based lattice QCD using HMC algorithms, due to the notorious sign problem: all methods available today are limited to µB/T (cid:46) 1 [2]. In contrast, SC- LQCD can be reformulated as a monomer-dimer system [3]. There, the sign problem can be made mild due to a resummation of baryonic and mesonic degrees of freedom [4]. Due to algorithmic developments over the last decade, in particular due to the application of the Worm algorithm to the monomer-dimer partition function [5], SC-LQCD - which has been studied via mean field theory [6] and with Metropolis algorithms [3, 4] since the 1980s - has experienced a revival, as simulations at finite baryon density could be performed with modest computational demands. Moreover, the chiral limit can be studied very economically - simulations are faster than with a finite quark mass. However, limitations remain. In particular, only the 1-flavor (4 tastes) theory has been considered so far in the dimer-formulation. The physically more interesting case of 2 flavors could not be addressed yet due to a severe sign problem in the mesonic sector [7]. Here, we propose a Hamiltonian formulation of strong coupling lattice QCD based on the Euclidean continuous time limit, where further simplifications occur. In particular, we show that this formulation is a generalization of Hamiltonians for spin systems. It can in principle be extended to arbitrary Nf. In this paper, we illustrate the formalism and give first Monte Carlo results obtained via Stochastic Series Expansion for Nf = 2 and U(2) gauge group.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
which is constant on static lines. The “spin” Sz simply counts the number of time-like meson hoppings, and is in no way related to the spin of the quarks. Spatial dimers can then be oriented consistently, such that for each spatial dimer between a pair of neighboring sites (cid:104)(cid:126)x,(cid:126)y(cid:105), one unit of spin ∆Sz = ±1 is transferred from site (cid:126)x to site (cid:126)y. Hence the total spin Sz ≡ Sz(t) = ∑(cid:126)x∈V Sz((cid:126)x,t) is globally conserved.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
Figure 1: Left: Typical 2-dimensional configurations in discrete (top) and continuous time (bottom) at the same temperature, where multiple dimers are absent and baryons (red) become static. L- and T-vertices have different weights. Meson lines can be oriented in a consistent way. Right: Mapping of static mesons (time-like chains) to a “spin”.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
and (2) the operator loop update, visiting a set of bonds in succession, starting from an input leg and de- termining the output leg with heatbath probability ∝ (cid:10)χ(x)χ(y)| ˆHaibi|χ (cid:48)(x)χ (cid:48)(y)(cid:11) . In Fig. 2 we compare different observables obtained from SSE and/or CT-Worm. We want to stress that a new observable, the i )2(cid:11), is also sensitive to the chiral transition. It measures the fluctuations spin susceptibility χS = β V in the number of time-like mesons, and is thus analogous (but not equal) to the specific heat.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
Figure 2: Observables in 1-flavor U(3): (top row) energy density and susceptibility measured with CT- worm and SSE agree; (bottom left) spin susceptibility measured with SSE; (bottom right) chiral suscep- tibility measured with CT-Worm.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
In the strong coupling limit, only one of the four tastes of staggered fermions remains light, since taste splitting is maximal. It was argued in [1] that the nuclear interaction in 1-flavor SC-LQCD is due to entropic forces: the presence of static baryons modifies the pion bath, with the modulation proportional to the ρ-propagator. However, with 1 flavor pion exchange cannot not occur, because mesons do not couple to baryons. Pion exchange can only be studied by going to Nf > 1. But no 2-flavor formulation of staggered SC-QCD suitable for finite-density Monte Carlo exists, as already the mesonic sector has a severe sign problem [7]. After reviewing the problems with the conventional dimer representation of SC-QCD, we derive a sign-problem-free Hamiltonian formulation in continuous Euclidean time.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
Figure 3: Left: definition of unflavored, flavored, and mixed dimers. Right: 2x2 sample configurations with positive and negative weight.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
Figure 4: Classification of all static lines for U(2) based on “spin” quantum number and particle content. Each static line consists of two arrows, dashed arrows denoting spin, curly arrows denoting flavor- neutral mesons content, and solid arrows denoting charged mesons.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
complication, for Nc = 2 we restrict to U(2). For Nc = 3 this restriction is not necessary.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
The absorption J+ πi operators can be represented as 19 × 19 lower left/upper right triangular matrices, where the entries are again given by vertex weights: v ˆπi = 1√ if states with S = 0 2 and |Q| = 1 are connected to the vertex, vπi = 1 otherwise. This Hamiltonian can be used in the SSE algorithm to obtain results on the chiral phase transition. Our preliminary Nf = 2 results are compared to mean field predictions in Tab. 1.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
Table 1: Comparison of the critical temperature aTc between mean field results and Monte Carlo results [in brackets] for U(Nc) gauge groups. The new results are in column Nf = 2. The MC value for Nf = 2, U(3) has not been measured yet.
Processed_New_algorithms_and_new_results_for_strong_coupling.txt
We have given a new, Hamiltonian formulation of strong coupling lattice QCD with staggered fermions in the chiral limit. It is based on the insight that strong coupling lattice QCD in the continuous time limit is analogous to a spin system. A new observable, the spin susceptibility, turns out to be sensitive to the chiral transition. Also, the Hamiltonian description allows to apply quantum Monte Carlo methods. In [8] we have studied 1-flavor thermodynamics via the continuous time Worm algorithm. Here, we make the first step towards 2-flavor simulations, by making use of Stochastic Series Expansion, a diagrammatic Monte Carlo technique which we generalize to the Hamiltonian in question. SSE has the advantage that more complicated Hamiltonians can be studied with ease. The drawback of SSE, in contrast to the continuous time Worm, is that we do not know of a way to obtain the two-point function for free. For the computation of the specific heat, the performance of both algorithms is quite similar. We have provided first results on the U(2) transition with two flavors. The extension to SU(3) with finite baryon chemical potential is more involved: the number of static lines increases to 44 in the mesonic sector.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
Abstract Ten years ago we presented a modified version of Okun’s law for the biggest developed economies and reported its excellent predictive power. In this study, we revisit the original models using the estimates of real GDP per capita and unemployment rate between 2010 and 2019. The initial results show that the change in unemployment rate can be accurately predicted by variations in the rate of real economic growth. There is a discrete version of the model which is represented by a piecewise linear dependence of the annual increment in unemployment rate on the annual rate of change in real GDP per capita. The lengths of the country-dependent time segments are defined by breaks in the GDP measurement units associated with definitional revisions to the nominal GDP and GDP deflator (dGDP). The difference between the CPI and dGDP indices since the beginning of measurements reveals the years of such breaks. Statistically, the link between the studied variables in the revised models is characterized by the coefficient of determination in the range from R2=0.866 (Australia) to R2=0.977 (France). The residual errors can be likely associated with the measurement errors, e.g. the estimates of real GDP per capita from various sources differ by tens of percent. The obtained results confirm the original finding on the absence of structural unemployment in the studied developed countries.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
The COVID-19 pandemic is an extremely active exogenous non-economic force affecting the quasi-stationary evolution of developed economies. In the beginning of 2021, one of extensively discussed topics is related to the dramatic fall in the unemployment rate forced by lockdowns and closure of all except vital businesses. In the United States, the rate unemployment jumped to 12.9% in the second quarter of 2020 and dropped to 8.9% in the third quarter. In the fourth quarter, the Bureau of Labor Statistics (BLS) reported further fall in the rate of unemployment due to quick economic recovery. This pattern is quite different from the unemployment persistence observed during the 2008-2009 financial crises.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
The observed large-amplitude changes in unemployment and real economic growth provide the best opportunity to assess the performance of multiple economic theories and to test the hypothesis of tangible structural changes in the labour market. Do we really observe major changes in the overall economic organization when significant parts of it become unnecessary as in the COVID-19 pandemic? This and many other theoretical assumptions and experimental facts have to be validated by successful economic models in order to pass consistency and quantitative accuracy tests. In this paper, the modified Okun's law is tested against the new data with the 2020 data playing the principal role for the USA.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
One of important features in the modified Okun’s law is the introduction of discontinuities in the linear relationship in order to accommodate the artificial changes in the definitions of real GDP and unemployment. Real shifts in the relationship between unemployment and real economic growth are not excluded, however. Such a structural, i.e. inherently economic, break should be detached from the revisions to GDP and unemployment definitions. It is demonstrated that the definitional revisions introduced by economic agencies like the Bureau of Economic Analysis (BEA) and the BLS just change the units of measurements like one changes the speed measurement units from km/h to mph when crossing the Canada-US border, with the physical speed retained.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
The modified Okun’s law is estimated for the biggest developed countries: the United States, France, Germany, the United Kingdom, France, Australia, Canada, and Spain. The revised results have high statistical significance and suggest the absence of structural unemployment in the studied developed countries.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
According to the gap version of Okun’s law, there exists a negative relation between the output gap, (Yp-Y)/Yp, where Yp is potential output at full employment and Y is actual output, and the deviation of actual unemployment rate, u, from its natural rate, un. It is important to highlight that Okun's law implies constant potential output and natural rate of unemployment. The modified model is dynamic and the same rate of unemployment may be the result of various trajectories in the real GDP evolution. The initial conditions may also be defining when major non-economic events significantly change population pyramid and economic structure. For example, the economic transition from socialism to capitalism in East European and Former Soviet Union countries followed various paths with different levels of real GDP per capita and rates of unemployment in the beginning of capitalistic development. The reunification of Germany is another example. Therefore, our model proposes a dynamic approach to the interpretation of the link between unemployment and real economic growth.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
The real GDP or output depends not only on economic performance but also on the change in population as an extensive component, which is not necessary dependent on other macroeconomic variables. For example, the USA population was growing by 1% and more per year between 1960 and 2010 due to immigration and high birth rate. Since 2010, this growth rate is systematically below 1% per year. The population growth in developed European countries was close to zero or even negative in the 20th century. In Japan, the total population dropped by 1.6 million between 2008 and 2018.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
law implies b<0. The intuition behind Okun’s law is very simple. Everybody may feel that the rate unemployment is likely to rise when real economic growth is very low or negative. An economy needs fewer employees to produce the same or smaller real GDP also because of the labor productivity growth.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
where ut is the rate of unemployment at time t. The intercept c≡0, as is clear for t=t0. This form of the modified Okun's law explicitly links the current rate of unemployment with the initial rate, u0. In the absence of economic growth, i.e. Gt/G0 =1, the rate of unemployment has to increase if a >0 and to decrease for a <0. It is also important that for a<0 the rate of real GDP per capita growth has to be ln[Gt/G0] > -a(t-t0)/b, where b<0. This condition means that economic growth not necessarily results in a decreasing rate of unemployment. For a weak economic growth, unemployment may grow.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
The continuous form (2) is easily transformed in a discrete one, and the integral is replaced by a cumulative sum of the annual estimates of dlnG with the appropriate initial conditions. By definition, the cumulative sum of the observed annual du’s is a discrete time series of the unemployment rates, ut. Statistically, the use of levels, i.e. u and G, instead of their differentials is superior due to potential suppression of the uncorrelated measurement errors.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
The model is obtained by statistical estimation of the break years and linear regression coefficients, which provide the lowermost RMS model residual for the entire studied period. There is also a possibility to introduce dummy variables when necessary. In some time series steps and spikes are not excluded. We did not use this option so far in the model.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
resources. There exits an effective measure to increase the long-term rate of real economic growth - migration. The USA has been using this remedy for decades. In the 21st century, many developed countries in Europe also understood the importance of population growth. Correspondingly, migration to the EU from the countries with low GDP per capita is one of the most effective economic drivers now. A similar process is observed in Russia - millions of migrants from the FSU countries play an important role in economic development. At the same time, there are closed economies with decreasing population. These countries demonstrate poorer economic performance.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
An artificial break around 1979 was found. It divides the whole 60-year-long interval into two practically equal segments. The agreement between the predicted and measured rates of unemployment was excellent with a standard model error of 0.55%. The average rate of unemployment for the same period was 5.75%, with the mean absolute annual increment of 1.1%. This is an accurate model of unemployment with R2=0.89. Hence, our model explained 89% of the variability in the rate of unemployment between 1951 and 2010.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
We noticed (Kitov, 2011) that the break year (1979) corresponds to the point in time when the estimates of CPI and GDP deflator started to diverge. Figure 1 displays three price indices: CPI (BLS), PCE, and GDP deflator (BEA) in the USA between 1929 and 2019. The CPI curve starts to deviate from the PCE and dGDP ones around 1979 expressing the introduction of new components in the GDP definition. The goods and products included in the CPI are a part of the GDP, and thus, the GDP deflator suffers the artificial break relative to the CPI, which is considered as a benchmark.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
The difference between the CPI and dGDP in Figure 2 illustrates the revision to the GDP definition. Between 1979 and 2010, this difference can be accurately described by a linear function of time. In other words, the dGDP is measured in slightly different units since 1979, which are just proportional to the units used in the previous period. Figure 3 presents two original and two corrected CPI and dGDP curves. When multiplied by a factor of 1.22, the dGDP curve is almost fully converted into the CPI curve, as supposed by the linear link between the CPI and dGDP. The period after 2010, demonstrates the start of a new deviation between the CPI and corrected dGDP curves. This deviation is also seen in Figure 2, where the segment after 2010 has a different slope compared to the previous segment. A new multiplication factor is likely needed after 2010 to match the CPI and dGDP.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
between 1929 and 1979. The shelf observed in the difference curve in Figure 2 has the same sense - the CPI and dGDP are almost identical. It is also worth noting that the estimates of the same economic variables are different for the US agencies and the OECD. This might be related to the definitions developed and applied in different sources, but for an accurate quantitative analysis based on statistical principles this facts manifests lower data quality and reliability in all sources.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
Figure 1. The CPI, dGDP, and PCE indices in the USA between 1929 and 2019. The CPI curve starts to diverge around 1979.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
Figure 2. The difference between the CPI and dGDP illustrates the revision to the GDP definition.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
One can also extend the dGDP definition used between 1979 and 2010 into the past using the same linear link: dGDP=0.8*CPI. This corrected segment of the dGDP is shown in Figure 3. Obviously, since the dGDP is by 20% lower than the CPI, the total growth in real GDP per capita since 1929 is larger than that reported by the BEA. Therefore, the corrected dGDP can be used for a more accurate estimate of the real GDP per capita in the past. We present this extended analysis of the dGDP behavior in the USA in order to justify the breaks in the modified Okun's law and to assess the BLS, BEA, and OECD data quality as a crucial component of the statistical analysis.
Processed_The_link_between_unemployment_and_real_economic_gr.txt
Our initial model for the USA worked well and its performance can be further validated and improved by new data. Almost ten years passed since 2010, and now we have two opportunities to check the model: new readings for the previous years since 2010 and the extremely deep fall in the real GDP per capita accompanied by an unprecedented growth in the rate of unemployment in the USA, both induced by the COVID-19 pandemic. The latter is a dynamic effect of an external force.