query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Does it work with Galaxy S5? | Yes it will work on any touchscreen phone but will only do what your finger can do. You will not be able to use the S Pen features or functions like air command, action memo, or pen window. |
What are the dimensions of the G-7 bulb? | The bulb is approximately 2 1/4" from tip of bulb to bottom of base and 7/8" across widest part of bulb (about the same dimensions as any standard nightlight bulb) |
What are the dimensions of the G-7 bulb? | They are just like a night light bulb I think. But I use night lights that have their own led bulbs built in. What are you trying to use it for? |
What are the dimensions of the G-7 bulb? | I don't have it on me right now, but I would say the bulb portion is about 4 cm long, like a large night light bulb. It is candelabra base, but is not as bright nor as long as a flame tip candelabra chandelier bulb. |
so in order to use this device do I need to charge it on the computer first, or can I just stand in the sunlight and will it work? | Hi there - yes to both. If you plug it into a computer it will charge a little faster than if you place it in sunlight. You'll need to give it at least 12 hours of constant charge at first... |
can a coleman stove be used on this table | It is not recommended that this table be used with a stove, you may want to consider our TA-8105, it has an aluminum top for the camp stove to sit on and would do much better then the TA-8106. |
can a coleman stove be used on this table | Yes. However that's not what I use mine for. I'm a Tupperware dealer and I use it for displays and demonstrations. |
If I order from homebrewstuff will I receive a KEGCO brand kit or a cheaper knockoff version? | All I can say is buyer beware. My regulator was bad when it arrived. I ended up buying me regulator locally |
I want to print avery labels for ebay packages. Will this printer handle thick paper like that? I need to replace my HP LaserJet 4100 with usb connect | We do use this printer for labels- they are not Avery, but very similar and it works fine |
I want to print avery labels for ebay packages. Will this printer handle thick paper like that? I need to replace my HP LaserJet 4100 with usb connect | Should work OK with standard weight sheet feed label stock made for use with laser printers. We routinely print on Staples & Avery brand address label sheets in our P2035 lasers with good results. |
I want to print avery labels for ebay packages. Will this printer handle thick paper like that? I need to replace my HP LaserJet 4100 with usb connect | Buy the HP P2055 or P2055dn if you want option for larger cartridge plus includes duplexer, also slightly faster & adds a display. The P2035 is a solid but basic workhorse, P2055 is even better for not much more money. We use both P2035 and P2055dn for small law offices, users quite happy. |
What is the warranty on this item? | My guess is that the warrantee is probably 1 year. However, it would also depend on how it is used. If it is subject to rough usage as in being plugged in and removed frequently the ware and tare would be excessive. I leave mine plugged in to my TomTom and the car all the time except when I am doing an update. Life time is the service not the device. |
i need the system files for this 2136T-LM unit! i accidentally formatted my unit & need all the files to reboot my gps to normal. customer service was no help since i think this is a discontinued unit. can someone copy their files, then email them to... | That's more tech savvy that I am capable of. Sorry. And, I have to say, it sounds a little far out there as a request. I think you would have to return it to the company for repairs. |
what does the axle nut need to get torqued down to? | Check with the vehicle specs. I believe mine was 175 ft lbs for 2003 Chevy Avalanche. |
what does the axle nut need to get torqued down to? | Something like 174 lb/ft but do confirm in the supplied booklet like MrMan said. |
what does the axle nut need to get torqued down to? | The hub came with a booklet listing torque values for 100's of vehicles. I just looked it up but don't remember what value it was. it will be in the book. |
The pressure switch will not fit on the end of the flash light -- i bought these from you together. Is there anything that I am missing? | Write a very bad review. They know by now what fits. They will take care of it and ask you to delete the comments. |
The pressure switch will not fit on the end of the flash light -- i bought these from you together. Is there anything that I am missing? | I had the same problem. You MUST order as a matched set from the same vendor with the promise that they are the same size and other "sex." Otherwise, you need to learn, as I did, to order the same size, in my case that was 'C8' and they fit perfectly. I ended up with some extra flashlights and switches but FINALLY understood and got ONE matched set. Email the vendor and let them know that they will get a bad rating unless they rectify the problem, they must know whatlight ans switch you have and if the sexes are right. If they do NOT help, write a VERY bad review and they WILL respond quickly. Hope this helps... I had the same problem. You MUST order as a matched set from the same vendor with the promise that they are the same size and other "sex." Otherwise, you need to learn, as I did, to order the same size, in my case that was 'C8' and they fit perfectly. I ended up with some extra flashlights and switches but FINALLY understood and got ONE matched set. Email the vendor and let them know that they will get a bad rating unless they rectify the problem, they must know whatlight ans switch you have and if the sexes are right. If they do NOT help, write a VERY bad review and they WILL... » Read More I had the same problem. You MUST order as a matched set from the same vendor with the promise that they are the same size and other "sex." Otherwise, you need to learn, as I did, to order the same size, in my case that was 'C8' and they fit perfectly. I ended up with some extra flashlights and switches but FINALLY understood and got ONE matched set. Email the vendor and let them know that they will get a bad rating unless they rectify the problem, they must know whatlight ans switch you have and if the sexes are right. If they do NOT help, write a VERY bad review and they WILL respond quickly. Hope this helps... « Show Less |
The pressure switch will not fit on the end of the flash light -- i bought these from you together. Is there anything that I am missing? | I had purchased a UltraFire C8 CREE flashlight and remote pressure switch (the one your talking about) and it fit with no problem. What type of light did you purchase? |
Will this add 4 ports in addition to my existing 6 ports on the motherboard? I wanting to run up to a total of 10 SATA 6Gb/s drives. Thanks. | Yes, that is my understanding. I have used other add-on cards for the same purpose in the past and they have done just what you want to do. However, I was not able to use this particular card because it required a different type of slot on the motherboard that what I have, so I was not able to use or test this one. I could not even return it because by the time I to use it it was beyond the return date. Sorry I could not help more but it should do what you want.Carl |
Does this case leave the charging port at the bottom open, and will the phone still charge in a Samsung desk charging cradle with the case in place? | Phil, the case does leave charging port open, I don't have any experience with the desk cradle so can't say yes or no about that |
Does this case leave the charging port at the bottom open, and will the phone still charge in a Samsung desk charging cradle with the case in place? | It does leave you access to the charging port at the bottom of the phone, but as far as placing the phone on a charging cradle it may not function because of the added protection around the case. |
Does this case leave the charging port at the bottom open, and will the phone still charge in a Samsung desk charging cradle with the case in place? | The charging port is open, I don't know about the dock, don't use one. Fits in my Samsung car dock. |
Does this case leave the charging port at the bottom open, and will the phone still charge in a Samsung desk charging cradle with the case in place? | The port is open but it's extremely narrow. Only a very low profile USB charger cable will fit. I don't have a charging dock so I have no idea if it will work on a dock with the case on. |
Does this case leave the charging port at the bottom open, and will the phone still charge in a Samsung desk charging cradle with the case in place? | The charging port remains open, I can't speak about true cradle I've wondered about that too. |
Could i plug it into my Nikon d3200 ? ZOOM H2 | I have used this mic. with a mini disc recorder and it worked wonderfully! If your camera has the capability of stereo recording this mic. can be good depending on what type of videos / audio you want to record. It is an excellent mic. for unplugged music events, recitals and concerts. One thing you should not place this mic. close to you but at least 10 feet away from what you want to record. |
Is this natural or propane gas? | This is a natural gas unit. They do make units specific to propane as well, but this model is strictly natural gas. |
applications of this phone are in Spanish? | no when i got that it was in korea languegg so i return it bc no ways to chang in english |
Will these mats will fit a 2007 Dodge Ram 1500 Crew Cab (Laramie trim)? | Yes, these floor mats should fit directly into your truck, like a glove, based upon my experience with my 2002 Dodge Ram 1500 SLT Quad Cab where they fit almost perfect except only one very small area on the driver's mat not hugging the transmission wall. Note, the third generation ( 2002-2008 ) of Dodge Ram 1500 trucks essentially made most body and other engine parts identical for the years 2002-2008 with very few exceptions (E.G. headlights, engine size, etc...). Also, there are many "purists" who say that the QUAD Cab on the third generation is not a true "crew" cab, based upon dimensions, however Dodge did not make the "MegaCab" (Read: "True" Crew Cab) for the Ram 1500 available as an option until the fourth generation (years 2009 and on). Sorry to be so technical but there are distinctions. |
Will these mats will fit a 2007 Dodge Ram 1500 Crew Cab (Laramie trim)? | Yes, but only if you buy the ones that will fit crew cab.the fronts fit very well, as well as the backs do. |
Will these mats will fit a 2007 Dodge Ram 1500 Crew Cab (Laramie trim)? | Justin,No These are for the Quad Cab. I can not fi d the crew cab version at this time. I will get back to you Monday morning.Thank you! |
Do these work with sony new release A6000? | I believe it uses the same battery as the alpha 7's so I would assume it does. |
Do these work with sony new release A6000? | Yes, they do! I was very pleased that all the batteries I bought for the NEX-3, NEX-3N were able to be used in the a6000 - wasabi and Sony's. Now, I have a total of 6 batteries as a backup!!!! |
Do these work with sony new release A6000? | Bought it months ago and it works just fine on the A6000. Using firmware version 1.1 if that helps. |
Do these work with sony new release A6000? | Yes they do! Tested with mine. While I can't attest to the exact battery life of these compared to the Sony branded batteries, they will discharge faster. |
Do these work with sony new release A6000? | I tried using in my A6000 and it works for a little then the camera says this battery is not supported and shuts off. Maybe I have newer firmware than the other commenters. |
Do these work with sony new release A6000? | Yes I just bought the Soy A6000 2 weeks ago and have been using on A6000 with no problems so far. |
is it compatible with windows 8 | It works well with the Windows 7 on my Laptop. I have not had any problems moving our wireless stuff from one version to another version previously. So unless Windows 8 is different in that way, I doubt that there would be a problem. |
Does this product also work with vinyl? | I think it would. I used it on sleeve of a varsity jacket. Worked very well. |
Does this product also work with vinyl? | Probably not as well. I had cracks where my feet rested on a vinyl coach which elevates my feet and the cracks keep coming back. I have treated it twice. but, it is easy to use. |
What are the dimensions of this item? | 4 1/2 inches long, little bit bigger around than a No. 2 pencil. Very comfortable to work with. |
What are the dimensions of this item? | Dear Jewel: I apologize for not answering as quickly as I had hoped. The dimensions of this item is 4 1/2 " lengthwise. VERY lightwight, AND as I had said before, VERY easy to lose if you are not careful. There is a clip at the top which makes it look like pens, but they can hook up to a pocket, or pocket protector, etc. I would not hang it on a belt, it would drop very easily. It has a rubber tip that you use on your device like the Kindle, Android, etc. If you press too hard on your device, the rubber tip might not glide as smooth as you would like to. Abuse on the rubber tip will cause it to lose its touch so to speak and you will find yourself looking for another one. I hope this helps. Dear Jewel: I apologize for not answering as quickly as I had hoped. The dimensions of this item is 4 1/2 " lengthwise. VERY lightwight, AND as I had said before, VERY easy to lose if you are not careful. There is a clip at the top which makes it look like pens, but they can hook up to a pocket, or pocket protector, etc. I would not hang it on a belt, it would drop very easily. It has a rubber tip that you use on your device like the Kindle, Android, etc. If you press too hard on your device, the rubber tip might not glide as smooth as you would like to. Abuse on the rubber tip will... » Read More Dear Jewel: I apologize for not answering as quickly as I had hoped. The dimensions of this item is 4 1/2 " lengthwise. VERY lightwight, AND as I had said before, VERY easy to lose if you are not careful. There is a clip at the top which makes it look like pens, but they can hook up to a pocket, or pocket protector, etc. I would not hang it on a belt, it would drop very easily. It has a rubber tip that you use on your device like the Kindle, Android, etc. If you press too hard on your device, the rubber tip might not glide as smooth as you would like to. Abuse on the rubber tip will cause it to lose its touch so to speak and you will find yourself looking for another one. I hope this helps. « Show Less |
What are the dimensions of this item? | They are not quite as long as my iPhone and they clip perfectly in my purse pocket where I keep my iPhone. Pretty colors and the price can't be beat. |
What are the dimensions of this item? | It's the size of a ball point pen. I would not recommend getting these-the rubber tip is hollow and does not work on the IPad . |
Does this bottle "sweat"? I'm looking for something that my son can keep on his desk that will keep his water cold but won't leave a ring on his desk. | Our son takes his funtainer bottle filled with water to school and keeps it on his desk to drink throughout the day. These bottles are amazing- I wash the bottles and while they are still wet I place them in the freeze the night before and in the morning we fill it with water and/or milk for his lunch box. It keeps his water/milk cold for about 6- 8 hours. Milk/water does stay very cold. It does sweat a little, so his teacher usually places a paper towel under it. We have used these funtainer bottles for 3 years and are very pleased with the results. Hope this helps:) |
Does this bottle "sweat"? I'm looking for something that my son can keep on his desk that will keep his water cold but won't leave a ring on his desk. | It does sweat a little if there is really cold liquid inside...not as badly as others but not totally dry. |
Does this bottle "sweat"? I'm looking for something that my son can keep on his desk that will keep his water cold but won't leave a ring on his desk. | I must say, I own quite a few of these bottles because they are so great! They keep your water cold and because they are double insulated, they do not sweat! My only complaint is, they are getting harder to find. If you are lucky enough to get one and love it, stock up! Hope this helps! |
Does this bottle "sweat"? I'm looking for something that my son can keep on his desk that will keep his water cold but won't leave a ring on his desk. | No, it does't sweat. You can safely set them any where. We have about 15 of these bottles in the family, and we all love them!! Add a few ice cubes and it will stay cold all day. Can't say enough....nice things about these bottles. |
Does this bottle "sweat"? I'm looking for something that my son can keep on his desk that will keep his water cold but won't leave a ring on his desk. | My son has used it all summer. I don't recall ever seeing any condensation on the outside. Works great. |
Does this bottle "sweat"? I'm looking for something that my son can keep on his desk that will keep his water cold but won't leave a ring on his desk. | This bottle does not sweat. It is great. We have a number of them and they keep the drink cold the entire day. |
Does this bottle "sweat"? I'm looking for something that my son can keep on his desk that will keep his water cold but won't leave a ring on his desk. | Nope, no sweat that I've seen. My son and I both use them, and we think they're pretty great. :-) |
How much weight does this add to the rifle? | That catcher weighs a little over 1/4 pound. 60 pieces of 223 brass weighs 1 pound. It is so nice not having to hunt and pick up brass. |
How much weight does this add to the rifle? | Not much weight at all until it is full of cases. I empty mine after a thirty round mag. More to keep the brass from bouncing out than to keep the weight down. I'm really happy with mine. |
How much weight does this add to the rifle? | Insignificant weight on the performance of the rifle. Don't even know it is there. |
How large is the box these come in? I'm shipping to a pouch address with size restrictions. | We order a 12 pack of restaurant size bags of the no salt blue corn chips. The box is big. I don't have the dimensions but think of a supermarket size cardboard box that they would ship toilet paper in or something of that nature. If you carried it its the only thing you can carry. Its not heavy but its that big that it takes both arms to hold. |
When I shoot in the sports mode, the monitor goes black. Is that supposed to happen? I only get 7 shots in a sequence. Is there a way to get more? | The Sports setting is a sub-setting of Scene mode, in which the camera makes most decisions for you and leaves you with limited ability to change the settings. With Sports, the P520 sets itself for continuous shooting in a burst of 7 shots. If you want to have more than 7 shots in a sequence, you would have to use a different shooting mode, such as Program, and then select continuous shooting from the Shooting menu, choosing the L option for up to 30 shots at high quality but lower speed, or one of the super-high-speed options for 60 shots at a very fast speed, but much lower quality. The monitor goes black because there is not enough time to keep refreshing it with the live view during the continuous shooting. |
When I shoot in the sports mode, the monitor goes black. Is that supposed to happen? I only get 7 shots in a sequence. Is there a way to get more? | Hi Lucy. I'm sorry, I haven't tried sports mode, yet. Anyway, I'd recommend you to check the Memory Card class. You should a good one, faster.... Class 10. |
Does anyone know how to make the color vibrant? This ink does not seem to be good quality. Nothing I print comes out the correct color. | I've been making mugs, license plates, and plaques with absolutely no problem for several months using this ink. Are you sure you are using the right time, pressure, and temperature? Using too much of any of those will significantly impact the resulting color. |
Does anyone know how to make the color vibrant? This ink does not seem to be good quality. Nothing I print comes out the correct color. | good bright colors come out when sublimas nothing but a good quality paper and set your printer to print in full color on glossy paper ultra premium. |
Can the soap dish be removed at install? I want the handheld to be able to be lower for elderly person, or younger (shorter) person. | I cannot remember well from when the plumbers installed it, but I think the unit was pre-assembled, but it can be moved down the pole almost to the valve (room must be left for the valve to turn). The hand-held shower socket also moves up and down the pole; the lowest would be about 3ft 6ins to 4 ft above the bath floor.. |
Can the soap dish be removed at install? I want the handheld to be able to be lower for elderly person, or younger (shorter) person. | yes it can be removed. also hand held shower also adjustable. There is not much pressure on hand held shower head. I hope this will help you make your decision. |
Can the soap dish be removed at install? I want the handheld to be able to be lower for elderly person, or younger (shorter) person. | Yes, I had planned to do the same, but ended up keeping it on since you can place it as high or low on the bar, or turn it off to one side. I have the soap dish pushed down all the way to the bottom, and turned off to the right side to stay dry. My handheld is is on the left in the lowest position right above the soap dish. This is in my 4 yr old's bathroom and is the perfect height. You are only losing .5" above the turn-on knob by leaving the soap dispenser on. You can move both the soap dispenser and handheld up or down with every shower if you want to. We have two of these shower heads, and everyone loves them. Yes, I had planned to do the same, but ended up keeping it on since you can place it as high or low on the bar, or turn it off to one side. I have the soap dish pushed down all the way to the bottom, and turned off to the right side to stay dry. My handheld is is on the left in the lowest position right above the soap dish. This is in my 4 yr old's bathroom and is the perfect height. You are only losing .5" above the turn-on knob by leaving the soap dispenser on. You can move both the soap dispenser and handheld up or down with every shower if you want to. We have two of these shower... » Read More Yes, I had planned to do the same, but ended up keeping it on since you can place it as high or low on the bar, or turn it off to one side. I have the soap dish pushed down all the way to the bottom, and turned off to the right side to stay dry. My handheld is is on the left in the lowest position right above the soap dish. This is in my 4 yr old's bathroom and is the perfect height. You are only losing .5" above the turn-on knob by leaving the soap dispenser on. You can move both the soap dispenser and handheld up or down with every shower if you want to. We have two of these shower heads, and everyone loves them. « Show Less |
Can the soap dish be removed at install? I want the handheld to be able to be lower for elderly person, or younger (shorter) person. | Yes, I had planned to do the same, but ended up keeping it on since you can place it as high or low on the bar, or turn it off to one side. I have the soap dish pushed down all the way to the bottom, and turned off to the right side to stay dry. My handheld is is on the left in the lowest position right above the soap dish. This is in my 4 yr old's bathroom and is the perfect height. You are only losing .5" above the turn-on knob by leaving the soap dispenser on. You can move both the soap dispenser and handheld up or down with every shower if you want to. We have two of these shower heads, and everyone loves them. |
Can the soap dish be removed at install? I want the handheld to be able to be lower for elderly person, or younger (shorter) person. | Yes you can leave it off during install. I did not put the soap dish on cause I have a 3 yr old so the hand shower can be lowered to the bottom for kids. |
Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to... » Read More Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - « Show Less | I have Onkyo TX-SR805 7.1. I also have this hum. I've tries everything under the sun and nothing gets rid of it. I've isolated it to the receiver in a pain staking process of elimination. If anyone has a fix, I would be interested. I have to have to return it, because otherwise it is awesome. That hum is really beginning to get to my ear drums. |
Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to... » Read More Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - « Show Less | Have you called Onkyo to see if they have any suggestions? Or maybe go to one of the AVS forums, they may just have an answer for you. somewhere like digital home forums . com or avsforums dot com. they are pretty brilliant there and most are either dealers or beta testers for a lot of the gear. good luck |
Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to... » Read More Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - « Show Less | Are you sure it isn't the subwoofer? It stays on all the time even when the system is turned off and produces a low level hum, constantly. That seems to be the norm for all the subs and the Onkyo receivers. I was surprised to walk into my media room and hear the hum coming from the sub and the system was turned off. Sub is always in stand by. Just a thought. |
Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to... » Read More Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - « Show Less | Mine is not comming from the sub. I've disconnected the sub and all the speakers 1 at a time and still have it. I did go into the Direct TV set-up and changed some audio settings and it is now at a lower voluume, but is still there. I thought maybe it was the Direct TV Receiver, but I disconnected it & still get have the hum running the receiver on fm stations.Thanks for the inputP.S. I have the Onkyo TX-SR705, not the 805. |
Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to... » Read More Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - « Show Less | It does not sound normal. Maybe normal at really extreme loud volumes due to interference, but really should not occur at all.As another person stated on this site, Make sure the ohms of your speakers match the ohms of the Onkyo in question. I believe the Onkyo 605 pre sets at 8 ohms. I would check that first. |
Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to... » Read More Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - « Show Less | I too have a hum at "quiet times". Which device menu are you referring to? The Onkyo Receiver or your Satellite Receiver? |
Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to... » Read More Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - « Show Less | Yeh, I bought mine 10/15/08 and had the same problem.It turned out to be a ground loop between my Receiver and my Samsung TV.I put a two-prong "cheater" on the Samsung power plug and that fixed it.Not the best way, but the hum is gone. |
Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to... » Read More Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - « Show Less | Grandpa,I was referring to the Direct TV Remote, Setup/Settings. I have since upgraded to an HD DVR and I don't get the Hum, with or without that setting. Maybe it was the old Direct TV HD Box. Good Luck |
Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to... » Read More Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - « Show Less | Lucy,I found the source of my hum. I have Direct TV HD. I found that going into the menu settings/Audio/Sound Effects and turning that option off, I was able to rid myself of the annoying hum. The option has something to do with keeping the audio settings from channel to channel, while it is changing you hear dead air except for the hum. Nice and quit now. Love this receiver!Larry |
Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to... » Read More Low volume level distotion/hum. There is a loud hum/distortion in my speakers when i try low volumes, or when there is a quiet spot in a movie. Just got this amp a couple of days ago, would hate to return it. Does anyon have any advice? - thanks - « Show Less | I had surround sound and two of the 7 speakers hummed when I put the Direct TV HD in "pause." To fix this problem go to the Direct TV remote, setup, settings, audio, and turn "on" dolby digital. Mine was off and caused the hum! |
So for a stock TJ I would need a total of 4 (2 sets) spacers? Or can you do it with just 2 (1 set) spacers? | I used a set of 4! I had the 1 3/4" in front and the 3/4" in the rear. This made it level. Now what i found out was that if you are using a stock suspension and this set up...and you weigh down your Jeep with gear....your back is gonna ride really low!!! So i would go with the 1 3/4" spacers all the way around and keep the rear a bit higher. This will compensate for your gear and stuff. Hope this helps! |
Would any one know how many gpm this showerhead has? | In the product manual, it says, "There is a water-saving flow restrictor which restricts the flow to a maximum of 2.5 gallons per minute (gpm)." |
Does the colored part of the plastic glow, or does it just look like a white light from a distance? | Hi,Generally just a white light. Sometimes you will see just a small strip of color glowing depending on the angle at which your pet is standing. Hope this helps. The lights are awesome! |
Does the colored part of the plastic glow, or does it just look like a white light from a distance? | There is a small white "window" on the front of the plastic piece that provides clear non- colored light. |
Does the colored part of the plastic glow, or does it just look like a white light from a distance? | It's a white light only. I have two lights--a silver and a black--and there's no difference between the two in how the light looks. |
Does the colored part of the plastic glow, or does it just look like a white light from a distance? | It's just a white light, the colored part does not glow. So the red would not be visible in the darkness. It's a good light, I could see my dog (a black and tan doberman mix) from 100 feet away - but mine broke within a month so I wouldn't recommend this brand. |
Does the colored part of the plastic glow, or does it just look like a white light from a distance? | Mine has a black plastic piece not red like the picture on the left surrounding the 3 LED lights. The black piece does not glow, however the 3 LED lights are quite bright. |
Does the colored part of the plastic glow, or does it just look like a white light from a distance? | Hi David, sorry I took long time to answer your question. The red part of the collar light up red, like a bright light bulb covered by a red container. Its very bright, I hope I answer the question if you have any other question please don't hesitate on letting me know. I will try to post a pic of my pet wearing the light. |
Does this laptop have bluetooth? | Sorry to say but this laptop does not have any bluetooth.There are some options to connect to external devices through some wifi etc.But BLUETOOTH not present means a big problem.Otherwise the laptop is good and boots up really quick using WIndows 8 |
Could you use regular drum sticks on this or would it break? | My husband thinks it would be ok for older kids to use drumsticks on but not toddlers. I found it to be well made and I am happy with its construction but I do not have experience with drums. |
Could you use regular drum sticks on this or would it break? | Yes, it is very sturdy. My two year old grandson uses all sorts of things, wooden spoons, other toys etc and has enjoyed it very much. His dad is a musician and plays with it too. |
Could you use regular drum sticks on this or would it break? | I think you could. It's a very sturdy drum. My 5 and 3 year olds have played with it for several years - they haven't been careful with it by any means - and it's held up REALLY well. I guess it depends in how hard you intend to hit it with the regular drum sticks. I'm sure my boys have hit it with other items than the sticks provided and ours hasn't broken. In fact, it still looks brand new. |
Could you use regular drum sticks on this or would it break? | My grandson has used a variety of 'drum sticks' including wooden spoons and plastic drum sticks from the Fisher Price drum. He also uses his hands. I'm sure regular drum sticks would be A-OK. |
Can the light be repalced or does it have a warranty Model sb194 -dx/06/12 | Sorry, no idea, I had one for years and the light never failed.... it is just to let you know it is working.... Good luck with your question..... Ciao! |
Can the light be repalced or does it have a warranty Model sb194 -dx/06/12 | I assume they can replaced as there are six screws to take the back off. I did not see any warranty information. |
Can the light be repalced or does it have a warranty Model sb194 -dx/06/12 | I really don't know what the pkg says about replacement. I have had one at a place for 3 yrs and the light is still working. Some of my friends have had one for up to six yrs and the light still works. |
Will this device speed up a slow internet dial up connection? | Nothing will speed up dial-up internet, unfortunately. It's possible to get *maybe* another hundred +/- kilobytes speed, but that will be unoticeable in use. This modem just makes it simpler to setup ones internet connection with Linux (because it's an external modem) and Windows because it's smaller than most external and internal modems. |
I would like to know if this replacement canopy will fit the L-GZ136PST-8? In the details it mentions other numbers, but not with the ending number 8 | I bought this specifically to replace the Madaga Gazebo Canopy sold by Target. I can't tell you if it would fit your gazebo or not. This one measured 10x10 and had a two tier roof. |
I would like to know if this replacement canopy will fit the L-GZ136PST-8? In the details it mentions other numbers, but not with the ending number 8 | Ralph, I think your best bet is Write to Garden Winds 4950 East second st. Benicia Ca 94510. The end # on mine is -2. Hope this helps. |
I would like to know if this replacement canopy will fit the L-GZ136PST-8? In the details it mentions other numbers, but not with the ending number 8 | I don't know the answer to your question but we have replaced the top and the screens a couple of times. The colors are not always the same but all are neutral and look OK together. I am wondering if the 8 is a color number. |
Will they fit a 2011 forester? | Hi Hannah, I don't know but when I've had questions about my Forester, I asked Subaru Superstore's online store. They answer my questions very quickly and seem to know all the answers :) |
Will they fit a 2011 forester? | I gave them to my grand-daughter as a graduation present for her new Forester. She has used them often and loves them; thanks me every time she sees me for the last 9 months. |
Will they fit a 2011 forester? | I don't think so - I have a 2014 and I believe the 2011 is different - check with subaru.. |
Do these fit in a standard cup holder in a car? Also, do they sweat a lot if you put something cold in it? (I want a travel smoothie container). | They do fit snug into a standard cup holder. They are not insulated though. Not a good choice for smoothies. I keep mine in a Thirty-one Gifts bring-a-bottle thermal. Which works great, for the sweating issue. It still fits in my car cup holders, just barely. |
Do these fit in a standard cup holder in a car? Also, do they sweat a lot if you put something cold in it? (I want a travel smoothie container). | Yes they sweat with cold beverages. They sit just the first couple inches in a car cupholder mine is stable enough but it doesn't go all the way down. I have an SUV |
Do these fit in a standard cup holder in a car? Also, do they sweat a lot if you put something cold in it? (I want a travel smoothie container). | Yes, they do fit in a standard cup holder. These work for a travel smoothie container. There is condensation. The bottle is not insulated so if there is a difference between the inside of container and outside of container temperatures, there will be some condensation. |
Subsets and Splits