query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Do these fit in a standard cup holder in a car? Also, do they sweat a lot if you put something cold in it? (I want a travel smoothie container). | The OXO bottle fits into my cup holder, but half the time, the holder lifts up when I lift the bottle. And yes there is some condensation - more with colder liquids. I like the handle and the straw, but some of the other features were not what I had hoped for. |
Do these fit in a standard cup holder in a car? Also, do they sweat a lot if you put something cold in it? (I want a travel smoothie container). | Yes, they fit in the cupholder in the car. I have never tried to have a cold smoothie in them, so that I would not know. |
Would this work outdoors? I noticed its bass activated | yes, I have used them outdoors for a New Years Eve party. Be carefull of the do getting them damp. try to cover it somehow. |
Would this work outdoors? I noticed its bass activated | Ya, it'll work pretty much anywhere that there is enough sound to activate it. It's not necessarily bass activated, however lower end frequencies seem to drive it better. If the music is loud enough, it'll play nice. For outdoors, I would keep it as close to your speakers as reasonably possible. |
Would this work outdoors? I noticed its bass activated | I would say yes, it would work outside but.... even inside, it needs to be right up to a speaker. Actually touching a speaker so it can get the bass. This is the only drawback. Otherwise, love this light! It's a lot of fun. |
Would this work outdoors? I noticed its bass activated | Works fine outdoors in good weather. There is a sensitivity adjustment if you aren't getting as much movement as you want. |
Is this a Front Assy like the pic. The write up shows: Rear Hub Assembly, 4WD, INCL WHL BRG - STEEL WIRE CLIP BRG FLG MTG HOLES THREADED | It is indeed the front only complete axle hub bearing assembly. Well worth the extra money for a quality American made product V/S the cheaper poorer quality imported ones. Trust me! |
Is this a Front Assy like the pic. The write up shows: Rear Hub Assembly, 4WD, INCL WHL BRG - STEEL WIRE CLIP BRG FLG MTG HOLES THREADED | if you waant to make sure you get the right part go to wwwjcwhitney their prices are the same as amazon and they have free shipping at certain times of the month |
can you use this direct to cell phone/ | It would not work direct to my iPhone 5 - may work on others but I use it with an Anker external battery |
can you use this direct to cell phone/ | Well, it has micro-USB output. So I suppose so...But you need to be careful, it has a pretty big current! It is intended for a larger capacity batteries, like external batter bank.I use it for that.It says 2.1 Amps of current!And you device needs to support that charge current of course. |
Will this board support Xeon E5 processors? I have a some available that would make migration low cost. | Without the exact processor, I can't tell you for sure but most of e5 v2 xeon should work as long as you're on the latest bios for the board. ASUS' website has a cpu compatibility section for all their boards. Put your e5 in and see what it says. |
Will this sharpen Japanese chef's knives that have a 30° (15° per side) angle? | Most of my kitchen and pocket knives are Shun and Al Mar Japanese knives. Received Work Sharp yesterday and all my knives (35+) are now sharpened and even polished with 6000 grit. The way the sharpening belt bends allow sharpening the 30deg edges with ease. I am way past the ritual of "perfect sharpening" the long difficult traditional way. With Work Sharp all my knives are as sharp or sharper than ever. It is so easy and convient while watching TV or listening to NPR radio to slide the blades through, wish I bought this 10 or 15yrs ago. It has always been a hassle to get out all the sharpening stones and tools, NO MORE! Happy Trails Most of my kitchen and pocket knives are Shun and Al Mar Japanese knives. Received Work Sharp yesterday and all my knives (35+) are now sharpened and even polished with 6000 grit. The way the sharpening belt bends allow sharpening the 30deg edges with ease. I am way past the ritual of "perfect sharpening" the long difficult traditional way. With Work Sharp all my knives are as sharp or sharper than ever. It is so easy and convient while watching TV or listening to NPR radio to slide the blades through, wish I bought this 10 or 15yrs ago. It has always been a hassle to get out all... » Read More Most of my kitchen and pocket knives are Shun and Al Mar Japanese knives. Received Work Sharp yesterday and all my knives (35+) are now sharpened and even polished with 6000 grit. The way the sharpening belt bends allow sharpening the 30deg edges with ease. I am way past the ritual of "perfect sharpening" the long difficult traditional way. With Work Sharp all my knives are as sharp or sharper than ever. It is so easy and convient while watching TV or listening to NPR radio to slide the blades through, wish I bought this 10 or 15yrs ago. It has always been a hassle to get out all the sharpening stones and tools, NO MORE! Happy Trails « Show Less |
Will this sharpen Japanese chef's knives that have a 30° (15° per side) angle? | No, this one won't but the Ken Onion edition will. It will do 15, 20, 25 and 30 degrees. I think that's the primary difference between them. |
"Leather and Nylon..." Which is it? | It is both. The flap, belt loop, front and back are leather. the side pouches are expandable nylon with tabs for easier access. I slip a small mag light on one side and a short pencil on the other. The leather is high grade and thick - looks good and should stand up to a lot of abuse. |
what is the lumen output? What is the warranty length? | I do not know the exact lumen output.... But I would guess it to be around the 1800-2500 range. I basing that on how it compares to other LED lights I own with stated lumen ratings. I do not know The warranty length either, but LEDs in general are known for their long life, and I can say that the housing on these particular lights are very durable... The two units I purchased have endured constant salt water sprays, occasional contact with petroleum based liquids and frequent cleanings with a 4000 psi pressure washer. They have been left on continuously for several months without over heating. Highly recommended. P.s. These are installed on an oil rig in north Dakota. |
what is the lumen output? What is the warranty length? | re the warranty, I got a refund for 2 that I bought as they both burned out. I explained to Amazon what happened and they approved a refund even though I had passed the 30 day deadline by 2 weeks. |
what is the lumen output? What is the warranty length? | I do not know the exact lumen output.... But I would guess it to be around the 1800-2500 range. I basing that on how it compares to other LED lights I own with stated lumen ratings. I do not know The warranty length either, but LEDs in general are known for their long life, and I can say that the housing on these particular lights are very durable... The two units I purchased have endured constant salt water sprays, occasional contact with petroleum based liquids and frequent cleanings with a 4000 psi pressure washer. They have been left on continuously for several months without over heating. Highly recommended. P.s. These are installed on an oil rig in north Dakota. I do not know the exact lumen output.... But I would guess it to be around the 1800-2500 range. I basing that on how it compares to other LED lights I own with stated lumen ratings. I do not know The warranty length either, but LEDs in general are known for their long life, and I can say that the housing on these particular lights are very durable... The two units I purchased have endured constant salt water sprays, occasional contact with petroleum based liquids and frequent cleanings with a 4000 psi pressure washer. They have been left on continuously for several months without over... » Read More I do not know the exact lumen output.... But I would guess it to be around the 1800-2500 range. I basing that on how it compares to other LED lights I own with stated lumen ratings. I do not know The warranty length either, but LEDs in general are known for their long life, and I can say that the housing on these particular lights are very durable... The two units I purchased have endured constant salt water sprays, occasional contact with petroleum based liquids and frequent cleanings with a 4000 psi pressure washer. They have been left on continuously for several months without over heating. Highly recommended. P.s. These are installed on an oil rig in north Dakota. « Show Less |
Are there any advantages to this over an immersion blender? Also, would this work to mix the wet & dry ingredients in a quick bread? | I bought this as a novelty for my son. It works great for eggs and mixing spices into liquids. I haven't tried it with thicker batter and it probably isn't better than an immersion blender. It's just more fun and takes more effort. |
My grandson will be turning 9, he has not had any luck with the helicopter purchased, ? good for his age? thanks Donna | I have an 11 year old brother who I purchased this for as a birthday gift and he loves it! Your grandson should really enjoy it. |
Does This Work Well For Recording Gameplay | At first it did but then it started having problems. My tip is to spend that extra money on a good mic. |
What about men's size US 13? | I was curious if I could get them on my husband's size 14 feet last night, and I was able to get them on. They actually looked like they fit alright, and he wore them for about 20 minutes. |
What about men's size US 13? | I don't really think the length of feet matter so much since it just has to do with spreading your toes. It's kind of a one size fits all thing. |
will it work with the desk top (cradle) charger? and is still waterproof? | Sorry, you will not be able to use the desktop cradle with this extended battery since it will not fit. |
will it work with the desk top (cradle) charger? and is still waterproof? | The extended battery does work with the Charge cradle and the back cover still offers water resistance but can't attest to how long it would stay that way over the OEM back cover... |
Does this machine have a setting for making different brew strengths? | Yes there is 3 different strength. It makes great tea. Janet you will love it |
Does this machine have a setting for making different brew strengths? | Yes, a little slider. Not sure how dramatic an effect, though - you're probably better just to adjust the amount of tea. |
Does this machine have a setting for making different brew strengths? | Yes, you can set it from weak to strong and anywhere in between. I'd recommend the strongest setting in order to use less tea bags. I use one family size tea bag and it's a perfect blend. |
Does this machine have a setting for making different brew strengths? | Yes, there is a sliding switch on the top to make weak, strong, or anything in between. You can also change the strength by adding less or more ice, or make it stronger by using ice cubes made of frozen tea |
Does this charge the switch 8 portable recharger? | Yes, you could even use the Nomad 3.5. So the range of devices that this Guide 10 can charge is the Switch 8 to the Lighthouse 250 Lantern. However, the larger the storage device the longer charge times. |
Is this use AA battery or recharger battery | It uses AA Alkaline batteries. I opted for this one because of that. In the event the batteries die all I have to do is put in new ones that I keeo with it as spares instead of having to plug it in and wait for it to charge. Hope this helps |
Does this support only 110v or also 230v.. does it work in the UK? | It's 110v but if you purchase directly from Schiit, I believe there is an option to choose 230v. |
Is this item water-proof or safe to be placed along the kitchen sink? | If water is splashed on it it does not hurt it and can be dried up, but you've got to be careful when doing so because you can be shocked. It scares you more than hurts you. Too if you put it by the sink you need to always remember to wear shoes so you don't get the static charge. |
Is this item water-proof or safe to be placed along the kitchen sink? | I don't think so. The battery compartment does not appear to be waterproof. Also, I wouldn't put them anywhere you would come into contact with them frequently while they are turned on, such as a kitchen counter, because they do deliver an unpleasant shock on the medium and high settings. |
Is this item water-proof or safe to be placed along the kitchen sink? | The scat mat is pretty well insulated and made from plastic so you should be fine. We put it on the kitchen counter and haven't had a Problem. However we make sure the counter is dry before placing it there and do not use the faucet while it's there just to be safe. |
Is this ottoman truly 35" square? I just returned one to Costco that was advertised as 35x35 but was barely 30x30. | Mine is more like 34.5" square (just measured), but that's pretty darn close. |
Is this ottoman truly 35" square? I just returned one to Costco that was advertised as 35x35 but was barely 30x30. | I'm not at home right now to measure it but I'm pretty certain it is at least 35". It is quite large. I have a corner arrangement with a love seat and a couch and it just fits in as a coffee table for both. I'm quite apply with it. |
Is this ottoman truly 35" square? I just returned one to Costco that was advertised as 35x35 but was barely 30x30. | Yes it is ... I absolutely love this piece... Looks expensive and very versatile. |
Is this ottoman truly 35" square? I just returned one to Costco that was advertised as 35x35 but was barely 30x30. | Sorry for the delay, I was away on vacation. This is approx. 33 1/2" square |
How many ounces does each hold? | I think 16, I gave them to my sister for Christmas and she loves them. They will be in the pool house kitchen. |
Is mandoline dishwasher safe? | Just checked the sleeve mine came in and there is no mention of whether it is dishwasher safe or not.Because it is plastic I would say yes, it is, but on the top shelf with the blade pushed in all the way so it doesn't get dull.I hand wash mine and am very happy to. It cleans up easily. |
Is mandoline dishwasher safe? | No, dishwashing is NOT recommended. To quote from the instructions booklet (the only English verbage can be found in the UK section) "Not recommended for automatic dishwashers, as high temperatures and strong cleaning agents could cause damage, reducing the lifespan of the product." It also advises "Place the wet VPower and inserts into the storage box to drip dry" "Never leave any of the V-Slicer parts in soapy water in case you inadvertently touch the blades while trying to remove them from the water." I only rinse mine with warm water immediately after using it and in all the time I have owned and used it, the blades are as sharp as ever. I LOVE the 'safety' setting - which simply raises the plastic 'V' above the lever of the 'V' blade, so you can not cut yourself - the first really foolproof mandoline I have ever used! The whole thing, main unit, additional blade storage unit and safety guard clip together, which saves space and keeps everything together. As long as you remember to place the blade in the 'safe' position(which is very easily done), you will have NO problems. |
Is mandoline dishwasher safe? | No. Too many variables -- water temperature, chemical detergents. As some have noted, it seems to work ok on (some) top racks, but the manufacturer clearly does not recommend it. Plus, it is so easy to wash immediately after using -- I use a long handled brush and warm water and it only takes a few seconds. My main concern would be in stressing the plastic to metal bonds as a result of going through the extreme temps of an automatic dishwasher cycle. Why risk this when hand washing is so fast and easy? |
Does this fit the late 2011 model? MD313ll/a. I see at the top that it fits the MD313 model, but the bottom of the page does not include it. Thanks | This did not work well with my late 2011 MacBook Pro 15". I returned it and got an OWC caddy. |
Does it fit 2009 spark? | I don't think so. I put it in my Sierra 2010 and it barely fit. I have to still play around with it to get it right. |
Is this compatible with macbook late 2013 | Hello, I'm Jewel with Kingston Technical Support, here to answer your question. Part number KHX16C9T3K2/16X is not compatible with the Late 2013 Macbook. Our HyperX Beast memory is a DDR3 DIMM for Desktops. The Late 2013 Macbook models do not support upgrading memory and the maximum amount of memory is up to 16GB only configurable at the time of purchase. The system does not have any memory slots to upgrade memory. For any further questions or concerns, please call us at 1-800-435-0640 (USA and Canada only) M - F 6am - 6pm PT and I or another available Technician will assist you. Thank you for selecting Kingston as your upgrade partner. |
What is the micron rating for this pump? | the manual states that it pulls down to 30 microns, but that would be dependant of some factors such as your local barometric pressure and what your using it for |
What is the micron rating for this pump? | We have used this pump all summer and were able to pull down to 25 to 50 microns. Lots of factors that ratings would be of no use when pulling a vacuum on different systems. |
Are these products corn-free? If, so, which ones? | It says in the product description that it has natural maltodextrin (from corn). I think that means there is corn in some form in there. |
Are these products corn-free? If, so, which ones? | I know this one is or I wouldn't have bought it. I checked on the product there is no corn in this one, however I am not sure what you mean by which ones as I have only bought this one......hope this helps |
Can you use this kit to make two upper impressions if you still have braces on your lower?? really need to know asap | Yes definitely. They just give you two mold kits for you to mix and sink your teeth into. It would be totally up to you what you decide to mold with each one. They just make retainers to cover both molds. |
Where is it made? I don't buy products made in China. | I only by Grohe products made in GERMANY. Please amazon provide these details on the page listings. |
Where is it made? I don't buy products made in China. | i will check and get back to you - but it's quite possibly the best showerhead i've tried and i've tried a lot!!! |
Steamer keeps shutting off while steaming lower half of drapery | That's because that steamer is garbage. I've returned 2 of them. Go to bed bath and beyond. I got a conair one for 50 dollars and it's lasted 6 months. Works perfect everytime |
Steamer keeps shutting off while steaming lower half of drapery | I have had three of them and they all do the same after a few months. I clean them and use distilled water and the same results. Buy a Shark or other brand. They seem to work much better. |
This is for just the cable, no stake included, correct? How long have you had the cable, and how well has it held up to weather? | Yes cable only and it is well worth the $$$, Our St. Bernard 20 weeks old, has used it daily and it is fine in the weather. I recommend it highly |
This is for just the cable, no stake included, correct? How long have you had the cable, and how well has it held up to weather? | No stake included. The cable lasts about 1 year then the cable starts to break in the winter because of the cold temperatures. |
This is for just the cable, no stake included, correct? How long have you had the cable, and how well has it held up to weather? | You're right, it is only the cable. I've only had it a couple of months but it's out in the rain and sprinklers and no problems so far. |
This is for just the cable, no stake included, correct? How long have you had the cable, and how well has it held up to weather? | It is just the cable. We've had it outside for 2-3 months with no visible wear yet. We no longer use it daily (since we finished out backyard fence), but it was used daily for over a month. Now we use it when we go to the lake. It works great with our 50-pound pit bull. |
Will this work on networsk around the world? Im thinking on use it in Norway | Hello Peter, it comes factory unlocked and works any country ive been in: trinidad,Us,Canada,UK.however, the operating system is dead.I still have mine and I love it to death, but it can't do much anymore. |
Will this work on networsk around the world? Im thinking on use it in Norway | Hello Peter, it comes factory unlocked and works any country ive been in: trinidad,Us,Canada,UK. however, the operating system is dead. I still have mine and I love it to death, but it can't do much anymore. |
Will this work on networsk around the world? Im thinking on use it in Norway | Brandon is right. I love mine too, but the only person who cares enough to create and update apps for this is Tarek from Wazapp (so you can connect to the Whatsapp server). I'm using it in Zimbabwe and it works well in cities with lots of 'service' but once I'm out of town, others still have 'service' on older phones and mine won't pick up a thing :( But I do still love the look and feel and I won't graduate to windows or iphone, so not sure what's next. Cheers! |
How does this measure, is it the luminous screen that is 13.3" or is it the width of the laptop from end to end? Thanks! | NOT quite sure what your asking, but the piece fits the entire top of the lap top matching the aluminum and the screen. J |
How does this measure, is it the luminous screen that is 13.3" or is it the width of the laptop from end to end? Thanks! | It covers it from end to end but it has a kind of ring around the screen to match the color of the laptop itself. I Love it!! Definitely recommend it to protect your big apple investment. I invested in the keyboard protection cover too from Moshi.....I recommend that as well |
How does this measure, is it the luminous screen that is 13.3" or is it the width of the laptop from end to end? Thanks! | This is luminous screen 13.3 inch... It will exactly fit 13.3 inch Mac book air... |
How does this measure, is it the luminous screen that is 13.3" or is it the width of the laptop from end to end? Thanks! | It is end to end... Since there is a border of the screen.. It doesn't touch the screen |
How does this measure, is it the luminous screen that is 13.3" or is it the width of the laptop from end to end? Thanks! | The measure is the diagonal of the screen itself... Without the aluminum bezel... |
Is the logo/icon I see in the image that's to the right of the faucet removable or is that embedded into the sink? | Ours didnt come with the logo that I know of...if it did it must be removable because it isn't on there now. Hope this helps! |
Is the logo/icon I see in the image that's to the right of the faucet removable or is that embedded into the sink? | Only in the photo - no logo on our sink upon arrival. We are really pleased with our purchase! |
Is the logo/icon I see in the image that's to the right of the faucet removable or is that embedded into the sink? | Hi Rick. My sink did not come with the logo that is shown in this picture. I would assume it's an adhesive stick on medallion or decal, so you can probably pry it off with a razor blade, but I'd ask the supplier to make sure. Anyway, I'm super happy with this sink. It's exactly the right size for a space where nothing else will fit, and it's nice to have the space on both sides of the bowl when you don't have a vanity or shelf above it. The casting and vitreous china is of the quality you typical find in Toto products, which is to say quite high. I'd highly recommend this sink if you are tight on space. Hi Rick. My sink did not come with the logo that is shown in this picture. I would assume it's an adhesive stick on medallion or decal, so you can probably pry it off with a razor blade, but I'd ask the supplier to make sure. Anyway, I'm super happy with this sink. It's exactly the right size for a space where nothing else will fit, and it's nice to have the space on both sides of the bowl when you don't have a vanity or shelf above it. The casting and vitreous china is of the quality you typical find in Toto products, which is to say quite high. I'd highly recommend this sink if you are... » Read More Hi Rick. My sink did not come with the logo that is shown in this picture. I would assume it's an adhesive stick on medallion or decal, so you can probably pry it off with a razor blade, but I'd ask the supplier to make sure. Anyway, I'm super happy with this sink. It's exactly the right size for a space where nothing else will fit, and it's nice to have the space on both sides of the bowl when you don't have a vanity or shelf above it. The casting and vitreous china is of the quality you typical find in Toto products, which is to say quite high. I'd highly recommend this sink if you are tight on space. « Show Less |
Is the logo/icon I see in the image that's to the right of the faucet removable or is that embedded into the sink? | Ours just says Toto on the right edge on the side. Nothing on the top/counter of the sink. |
Any tips on how to use it on my 6 week old? somebody told me in the creases before bath time? can I use it all over as a moisturizer and in creases? | I use it as an all over moisturizer after bath time. She smells lovely and she has never had any skin issues. |
Any tips on how to use it on my 6 week old? somebody told me in the creases before bath time? can I use it all over as a moisturizer and in creases? | Hi Meg,I have an 8 week old (baby#3) and I have been using it as an all over moisturizer. Keeps skin nice and soft with consistent use. This oil and the Badger Baby Balm works pretty well for cradle cap too, although nothing has compared to pure jojoba oil. That's only my experience though, what works for one baby may not work for another. Hope that helps a bit. |
Any tips on how to use it on my 6 week old? somebody told me in the creases before bath time? can I use it all over as a moisturizer and in creases? | Hi Meg, I have an 8 week old (baby#3) and I have been using it as an all over moisturizer. Keeps skin nice and soft with consistent use. This oil and the Badger Baby Balm works pretty well for cradle cap too, although nothing has compared to pure jojoba oil. That's only my experience though, what works for one baby may not work for another. Hope that helps a bit. |
Thanks .... However, there is a number of people who gave it a 2 and 3 star rating who say it frayed on them .... any insights on that | Hi, I got this for my son. After using it a week the center did have some broken fibers so we wrapped the center with duct tape. I am not complaining, the way the rope is used I kind of expected it to fray. Maybe in the future the company will wrap the center. Otherwise he was very happy with the rope - a good workout. |
Thanks .... However, there is a number of people who gave it a 2 and 3 star rating who say it frayed on them .... any insights on that | Had 30 volleyball players pound it to submission for two months, still looks new. Have had no issues with this product at all. |
Could someone tell me how many joules this strip has? | Well I have this strip but it didn't list it and Belkin doesn't make this brand any more. There is a newer version that is listed at 1800J. Here is a link on Amazon. http://www.amazon.com/Belkin-Outlet-Protector-Telephone-Protection/dp/B000JEACFK/ref=pd_sim_sbs_e_1?ie=UTF8&refRID=0ZTVHR271WGRDJ253FCW The info on Belkin site is at http://www.belkin.com/us/BP108200-06/p/P-BP108200-06/ |
How long are the skirts? - I need them to cover the front of a bar | Hi..I don't think it would cover a bar..maybe 4 ft? You might put something over the bar to hang down and use this as a lower border..it is really pretty |
How long are the skirts? - I need them to cover the front of a bar | They are the height of a a 8ft rectangular folding table. I don't think they would be the height of a bar table. I had used them to cover the front of a bar at my party, it was about 1-2 ft not covered. I hope this helps! |
How long are the skirts? - I need them to cover the front of a bar | If you mean length as left to right, It would be approx 7 feet or slightly more..but not any less. If you mean length as top to bottom, it would be approx 3.5 feet good enough to cover a banquet table (exactly as Csp reviewer has mentioned) |
How long are the skirts? - I need them to cover the front of a bar | I used in on a average height banquet table , I attached it to the rim of table and it hung straight to floor, not to short or too long. |
I bought this assuming it was fit for road bikes. is there an attatchment needed? | i am not sure the kind of pin u need....i have a roadmaster mountain bike...it works perfectly for that without any attachemnt... |
I bought this assuming it was fit for road bikes. is there an attatchment needed? | There is an attachment on the tip where you can switch it between presta and schrader. All the parts should be in there! I had to mess around with both bike tires (one of each kind) to figure it out but it works! |
Is this pure zeolite? or a mixture? | I don't know if it's a mixture. I'm not sure how to tell. I was unable to detect any sand in it when I put it in the filter. I replaced some old Zeolite and there was no sand in that. Whatever the case, the product works well. Be sure to follow the instructions and flush the filter thoroughly before circulating into the pool. If you don't you will end up with cloudy water that will probably have to be replaced. |
Just want to know if this is powerful enough to take crows out of my local trees? | Yes it surely is. From 25-30 yards a pellet will travel through an aged 1 x 6 dog ear fence board . |
Just want to know if this is powerful enough to take crows out of my local trees? | If you can hit the crow with the right pellet, it's toast. It's a powerful spring rifle. This thing will take down large raccoons. If you try that, make sure you're zeroed and hit them in the money. |
Just want to know if this is powerful enough to take crows out of my local trees? | Crows? I was a blueberry farmer and crow feathers are tough enough to resist a shotgun. You would have to shoot it in the eye. |
Just want to know if this is powerful enough to take crows out of my local trees? | I would think the rifle would be successful with crows as I only use mine on pest squirrels. Even body shots eliminate the squirrels. |
Just want to know if this is powerful enough to take crows out of my local trees? | I have routinely used mine since purchasing to rid squirrels from my backyard, and they are pretty resilient, so I'm positive it is powerful enough to take your crows out. |
Just got it and it seems like it wont spin easily? Has anyone else experienced this? Thoughts. | mine is smooth. I have 19" flat monitor on mine with no issues. your's might be defective. bad bearing etc. it should turn nice with a full gallon jug of water on it. |
Just got it and it seems like it wont spin easily? Has anyone else experienced this? Thoughts. | If there's a lot on it, it may not turn easily, but I really haven't had any problems with mine. I would test it w/o anything on it and if it still doesn't turn easily, I would return it for another one. |
Just got it and it seems like it wont spin easily? Has anyone else experienced this? Thoughts. | Ours spin just fine. Our 6 yr old granddaughter loves to twirl them. Have to watch how it is loaded. Distribute weight evenly and don't overweigh. |
Just got it and it seems like it wont spin easily? Has anyone else experienced this? Thoughts. | I found that if you put things on it with much weight it was difficult to turn. I was originally going to use it in a cabinet with glass spice jars, but ended up using it for storing jars of mineral makeup instead. It also makes a weird grinding sound if you turn it too fast. |
Can the backrest be adjusted to be perpendicular to the floor? | No. It is technically perpendicular to the seat, which is always at an angle up. This makes it nearly impossible to get any kind of leverage while benching or using the bench at the parallel position. Very impractical overall. |
Does this have a forward jet? or just rear facing? is there a noozle available with a forward jet? | No, this does not feature a forward jet. At this time we do not carry a nozzle for this hose that propels water both forward and backward. |
My intent is to use this for airsoft. Think this'll work? | No. Your standard airsoft bb is 6mm or larger this has opening that are just smaller than this for a 5.56mm bullet to pass through. |
looking at another similar unit Sunlinq Solar Panel Charger 12v, 6.5a - less amps more volts - wondering if it is a better for 7.2v battery? | Sorry haven't used mine yet, the instapark is good quality, check it out on you tube. Thanks Steve |
looking at another similar unit Sunlinq Solar Panel Charger 12v, 6.5a - less amps more volts - wondering if it is a better for 7.2v battery? | You are more likely to over charge the battery with a 12 volt unit. Just ensure the whole solar array is in the sunlight for optimal charging. |
looking at another similar unit Sunlinq Solar Panel Charger 12v, 6.5a - less amps more volts - wondering if it is a better for 7.2v battery? | I'm sorry, but my wife actually bought it, I've never tried it, and she knows nothing about these kinds of things.All I know is that she's quite happy with the product overall- seems to work as described.Hope you can find an answer from someone else more informed than us! |
How do they measure the 8' length? (*INCLUDING* or *EXCLUDING* the curved hanger section at the end) I need to know how long the corrugated section is | 8' is including the curved hanger section. The corrugated section is about 7'. |
is battery and charger included? | No lo se , porque la laptop aun no he recibido porque esta retenida por TransExpress en sus bodegas y no me la quieren enbiar. |
Subsets and Splits