query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
my wrist is just 6 inches should I get the small? I don't like to wear watches that are to loose. | I'm a guy but I don't have particularly large wrists (maybe 7"). The medium fits me well. It stays in place just right but isn't too tight. |
my wrist is just 6 inches should I get the small? I don't like to wear watches that are to loose. | That's a tough call - I think the sizing is a little on the small size, but you are right on the line. If you happen to see it at a retailer, the packaging has a nifty clear plastic split page on the front that lifts up so you can try the different sizes on your wrist without opening the packages. I suggest you check it that way. |
my wrist is just 6 inches should I get the small? I don't like to wear watches that are to loose. | I bought the large because I was in between medium and large. Wished I had bought the medium. |
Does it get hot enough to cook steaks properly? | It does not cook like a char ohl or propane grill. You do nt get the quick sear. The grill will operate at about 450 deg. So it takes longer to cook the steak. Maybe a little better than cooking the steak in the oven. |
Does it get hot enough to cook steaks properly? | Yes. We have had no issue. Keep the lid closed until it makes temperature, then do the steak. |
Does it get hot enough to cook steaks properly? | I have not tried steaks as yet. Still getting use to how it cooks. It cooks hamburgers differently than what I expected. It is like anything else new, one has to get use to it. I do not see why it wouldn't do the job on steaks. |
Does it get hot enough to cook steaks properly? | Yes! Setting a specific temp is impossible (a lot of tinkering with knob), a good cooked steak is possible. |
Does it get hot enough to cook steaks properly? | "Properly" --depends on the individual!! My grill easily reached 550 degrees-plenty hot to sear any steak which is the first step to a "good" steak. The key item to remember, while using this grill, is to keep the cover closed while grilling thus keeping the optimum temperature for whatever is being grilled. |
Does it get hot enough to cook steaks properly? | I have not used mine yet, but I have read several reports that it in fact does not. |
Does this card support jumbo frame? | Yes it does. Just remember that you have to set the MTU size at every step of the connection. In other words, the switch matters too. |
Are these made in the USA | Hi there! They don't say but I highly doubt they're made in USA. They ship out of China no matter who I buy from and whether here or ebay. |
Can grinding wheels be replaced with buffing wheels? I'm looking for a buffer and saw this machine, I was wondering if I could swap out the grinding wheels for buffing wheels? | yeah but be carefull, if it spins too fast youll "burn" the finish on what you are polishing. |
will this chain kit fit a LT285/70r17 | LT245/75-17~ LT235/80-17~LT265/70-17265/60-18 ~ 245/75-19.5~ 265/70-17~245/70-17.5~255/70-18 |
will this chain kit fit a LT285/70r17 | Also 8 other tire sizes, but the one you are requiring about, it would not work. |
I cannot find a definitive answer of this one vs. the SP507 Which is the redesign?? Thanks | I used eight SP-515's in a 2007 Expedition 5.4L and it runs fine. Per the internets, SP-515 replaced SP-507: http://www.f150online.com/forums/2004-2008-f-150/469595-motorcraft-sp515-will-not-fit-5-4-a.html Fordparts.com still shows SP-507. It appeared to me that SP-515 is still a two piece plug, so make sure to apply nickel anti-sieze compound below the threads but above the ground strap. see these links for instructions and help: http://www.f150online.com/forums/articles-how-tos/430004-sparkplug-change-2004-2008-5-4-3v-step-step.html http://www.amazon.com/Lisle-LIS65600-Broken-Remover-Engines/dp/B00267PZUK http://www.f150forum.com/f4/5-4l-3v-spark-plugs-engine-build-dates-before-10-09-07-a-56871/index11/ http://www.fourwheeler.com/how-to/engine/129-1012-ford-three-valve-broken-spark-plug-blues/ http://www.f150online.com/forums/v8-engines/333465-looking-your-help-sparkplug-change-2004-5-4l-3-valve.html |
I cannot find a definitive answer of this one vs. the SP507 Which is the redesign?? Thanks | The plug you buy on here is the redesign. Its common for Ford to list the old part number, then substitute the revised part upon ordering it. Nothing to worry about. |
I have a 45lb Saber takedown recurve bow at 63in. unstrung and strung it is 62.5in.. Would I go 60, 62, or 64 AMO? | if your recurve is 63" UNstrug you should in theory go with the 60" string. strings for recurves are generally supposed to be 3.5"-4" shorter than the unstrung bow length from nock to nock. you have a some-what unusual bow length, much like my fiber glass flat bow which I find it hard to locate strings for. you theoretically need a string 59" long. you may want to do what eventually did and find some vids on youtube for making strings and then you just buy the Dacron b 50 and make it whatever length you need. |
My hugo quadpod came already assembled. How do I adjust the height? Do I have to remove the screw in the bottom of the quad?Can't seem to move the cane to different notches by pressing in on the button. | There is a notched ring at the bottom of the top section which must be turned to loosen, then pressing the button and twisting the bottom section slightly will cause the button to hide so that the bottom section can now be shifted up or down to the desired height. (You might want the help of a second person to push the button while you twist). When that is achieved, twist the bottom section back so that the button will now fall into the corresponding hole. Now, re-tighten the ring at the bottom of the top section and you're all set. Enjoy your walking partner!!! |
Is this a complete emulsifier? | I'm not 100% sure what a "complete emulsifier" is. That being said, you don't have to add an alcohol or anything to get your recipe to emulsify. My recipe is essentially water, oil, and this e-wax (plus scent and preservative) and I've never had any problems with separation. |
Is this a complete emulsifier? | Yes I have used it in lotions and creams. works great for me. never any separation in my product. Enjoy your purchase and I hope that helped. |
one questions, these fins size XL are 8.5 to 10 for men? these fins are unisex? no other color? I am size 8.5 U.S. I serve these? | From experience, I would recommend getting the XL. I'm about the same size as you, and I had contacted Finis to confirm before I purchased my pair. |
one questions, these fins size XL are 8.5 to 10 for men? these fins are unisex? no other color? I am size 8.5 U.S. I serve these? | Yes. Yes. Not sure. Probably. There is also a sizing chart on this and other websites. |
one questions, these fins size XL are 8.5 to 10 for men? these fins are unisex? no other color? I am size 8.5 U.S. I serve these? | i'm an 8 to 8.5 and I tried both L and XL. for me, XL is very spacious and does get lose when swimming in the water. I chose the L and it fits me well...more like a snug-fit. It is unisex and so far it only comes in yellow. |
What is the rise, in inches, for size Large? I am tall waisted and the photo looks like the waist might not clear my hip bones. | I'm very high waisted also and the large sits up on my natural waist above my belly button. Do not know the rise off hand |
Is sades model sa-903 comparable with xbox 360 and a mac pc | Mac I'm sure as long as you install the driver. XBox..... Probably the same as PS4. It will work like a stand alone headset but volume cannot be controlled from headset |
Can you use this raised bed garden kit around a tree like a border? I mean, with no flowers, just to collect all the leaves the tree drops? | I don't see why you could'nt. I am no expert, if one exist. But in time, the leaves would compost themselves, giving you a added benifit. I think it would look great. I have five that I use for vegetables, and they look great. |
Can you use this raised bed garden kit around a tree like a border? I mean, with no flowers, just to collect all the leaves the tree drops? | Just my opinion, I think maybe getting some garden edging would be better to collect the leaves, or there is flex border material, like the recycled decking, that you could wrap around ground stakes, that may be better suited. This is a great raised bed, I bought two of them, but I am going to use them for vegetable gardening and make mini-greenhouses out of them, maybe do both projects !! :) take care |
Can you use this raised bed garden kit around a tree like a border? I mean, with no flowers, just to collect all the leaves the tree drops? | Just my opinion, I think maybe getting some garden edging would be better to collect the leaves, or there is flex border material, like the recycled decking, that you could wrap around ground stakes, that may be better suited. This is a great raised bed, I bought two of them, but I am going to use them for vegetable gardening and make mini-greenhouses out of them, maybe do both projects !! :)take care |
Can someone tell me what all I need in order to successfully install this on my own? | Look at the ifixit.com guide. That'll give you a step by step guide and a list of tools. |
Can someone tell me what all I need in order to successfully install this on my own? | 1500 Watt Dual Temperature Heat Gun, Heavy Duty Suction Cup for Mac Screen Repair, Phillips screwdriver. is what i bought and it worked fine. watch the ribbon cable it likes to come out as you set the screen in place.is easier then you think check YouTube there is a great video on doing it.also will need a putty knife i tried a plastic on and it started to melt so don't be afraid of a clean metal one.and be careful of the rubber gasket it is easy to stretched or break i had to cut out a damaged section my putty knife stretched while it was hot. |
How often do we replace?. | As I recall, replacement is every 3 months or 1500 gallons of water used. At that point the unit beeps each time you turn the unit on. I live alone and don't use that amount, so I just live with the beeping to stretch out the time before replacing. |
I have a 30 ft round above ground pool, can I use the Premium Trussed Commercial system for my pool? What do you suggest? | This is for inground pools and they do not have 30ft pole. So answer is no. |
I have a 30 ft round above ground pool, can I use the Premium Trussed Commercial system for my pool? What do you suggest? | Diana, I have purchased two of these Hydro Tools reels they are complete junk. My recommendation is just save yourself aggravation money and time go and find a dealer for Horizon Reels they are expensive but, come with everything including ball bearings, aluminum inserts for the tube for stiffing the tube. Mine for my 20' x 40' cost me around $630 last year. |
I have a 30 ft round above ground pool, can I use the Premium Trussed Commercial system for my pool? What do you suggest? | You would have to find a 30 ft pole to roll the cover. You need a deck, since this is for in ground pools. |
I have a 30 ft round above ground pool, can I use the Premium Trussed Commercial system for my pool? What do you suggest? | Diana,I think it will work well for you. As far as the pole spanning the pool, we used the 3", for the 22' our pole inded up. You'll need nearly 32' or so to span your. I'd go to a 4" pole. Also I went to the hardware store and added bolts to the hidden side of the sections were they are slid into other section. We have no sagging issues. We also love our cover. makes a huge difference. Also, the height of the trussed end you're inquiring about might allow you to leave it in place (mid-pool) while you swim. we swim under ours. Hope this helps.Dan |
I have a 30 ft round above ground pool, can I use the Premium Trussed Commercial system for my pool? What do you suggest? | Only if you have a platform to set them on and you would have to roll it up from the center. it is not really made for a round solar cover. |
Are the bags removable? | The practical answer is that they are stitched in with the intent to keep them from being removed. With that being said, the stitches are accessible if one had a burning desire to remove a cell or 2. |
I just brought a Singer Confidence 225 stitch will these presser foots work with my machine | I'm not sure about the specific machine you have but I have a singer 2662 and it works for my machine. |
Does it leave any residue when it is removed? | no it does not,however when its removed and then re applied the screen protector gets smudge marks |
I know this has Bluetooth for streaming audio but what I'd like to do is listed to sound via a bluetooth headset. Is there a bluetooth out option? | There is a plug for headphones in front. When pairing for Bluetooth, there are no options and I don't see any reference to Bluetooth output in the manual. You could download the user manual and see if you can figure a work around, but I don't see one. Good luck. |
I know this has Bluetooth for streaming audio but what I'd like to do is listed to sound via a bluetooth headset. Is there a bluetooth out option? | I have many blue tooth components that run off of the receiver I don't think there would be a problem with your headset. I hope this helps with your question. |
I know this has Bluetooth for streaming audio but what I'd like to do is listed to sound via a bluetooth headset. Is there a bluetooth out option? | I wanted the same thing and found after I bought the unit, that it was input only, still enjoy it though. |
I know this has Bluetooth for streaming audio but what I'd like to do is listed to sound via a bluetooth headset. Is there a bluetooth out option? | You would have to get a Bluetooth plugin for the front headphone jack. Search Amazon for the Miccus Mini-Jack. It works great. And you could use it for other devices. |
How do you make it light up? Just got it and nothing can't tell if it's the batteries or defective. | There should be a little red switch on the bottom of the truck. You might have to remove the little piece of paper that prevents it from lighting up, it should also be on the bottom. Hope that helps you. |
What does the printing on the screen say? | I wish I could tell you, but do not know Chinese. On the other hand I am extremely pleased with this screen - even without knowing what the writing says. |
What does the printing on the screen say? | Early Plum Blossom Flowers cover a plum blossom tree like a white jade in the cold, Far away from the village road near the bridge over the stream. I didn't know the flowers blossom early by the water, I doubted that was the winter snow had not melted. 早梅 - Zǎo Mi 张渭 （唐）- Zhāng Wi (Tng) 一树 寒 梅 白 玉 条- Yīsh hnmi biy tio,， 迥临村路傍溪桥 - jiǒngln zūnl bng xīqio。 不知近水花先发 - Bzhī jn shuǐ huā xiān fā， 疑是经冬雪未消 - y sh jīng dōng xuě wi xiāo。 Source: http://www.ebridge.cn/new/languages/lan.php?sno=1729 |
What does the printing on the screen say? | Early Plum BlossomFlowers cover a plum blossom tree like a white jade in the cold, Far away from the village road near the bridge over the stream.I didn't know the flowers blossom early by the water, I doubted that was the winter snow had not melted. 早梅 - Zǎo Méi张渭 （唐）- Zhāng Wèi (Táng)一树 寒 梅 白 玉 条- Yīshù hánméi báiyù tiáo,，迥临村路傍溪桥 - jiǒnglín zūnlù bàng xīqiáo。不知近水花先发 - Bùzhī jìn shuǐ huā xiān fā，疑是经冬雪未消 - yí shì jīng dōng xuě wèi xiāo。Source: http://www.ebridge.cn/new/languages/lan.php?sno=1729 Early Plum BlossomFlowers cover a plum blossom tree like a white jade in the cold, Far away from the village road near the bridge over the stream.I didn't know the flowers blossom early by the water, I doubted that was the winter snow had not melted. 早梅 - Zǎo Méi张渭 （唐）- Zhāng Wèi (Táng)一树 寒 梅 白 玉 条- Yīshù hánméi báiyù tiáo,，迥临村路傍溪桥 - jiǒnglín... » Read More Early Plum BlossomFlowers cover a plum blossom tree like a white jade in the cold, Far away from the village road near the bridge over the stream.I didn't know the flowers blossom early by the water, I doubted that was the winter snow had not melted. 早梅 - Zǎo Méi张渭 （唐）- Zhāng Wèi (Táng)一树 寒 梅 白 玉 条- Yīshù hánméi báiyù tiáo,，迥临村路傍溪桥 - jiǒnglín zūnlù bàng xīqiáo。不知近水花先发 - Bùzhī jìn shuǐ huā xiān fā，疑是经冬雪未消 - yí shì jīng dōng xuě wèi xiāo。Source: http://www.ebridge.cn/new/languages/lan.php?sno=1729 « Show Less |
What is the difference between Leatherman 830039 New Wave Multitool and Leatherman 830040 New Wave Multitool? | The difference is the 830039 comes with a Leather/Nylon Combination Sheath and the 830040 comes with a Nylon Sheath, the Wave is the same. I prefer the 830040 because it has a hole in the bottom of the sheath allowing the Wave to be carried in the pliers ready to use position (CAUTION, do not set down with it in this position). |
What is the difference between Leatherman 830039 New Wave Multitool and Leatherman 830040 New Wave Multitool? | Apparently it is a difference in quality, if it doesn't measure up for some reason it goes into the lower category so I read online in a forum (but I haven't noticed any difference), but it is possibly the sheath included in the pack? |
Brownies with Lasagna? I'm wondering if you can make Brownies with this bigger pan for Lasagna so I don't have to buy both? | Hi Brian, Yes you can make brownies in the bigger pan! (I suppose I should update my review) I use 2 boxed mixes instead of one and I love to add things into mine, so I threw in a cup of pecans and a cup of dark chocolate chips. They turned out just as good as in the Brownie Edge Pan, but much bigger. One thing to make note of is the cooking time. I added about 10-15 on to the standard cooking time and this worked well. Obviously everyone's ovens are different so I suggest keeping an eye on it. If you're not sure, use the toothpick method. (Although I like my brownies very chewy/fudgy so I consider them done when the toothpick come out "almost" clean.) It is a great pan, so if you decided to buy it I'm sure you'll come up with many different ways to use it. |
Does it set the alarm of if the bar/ loop portion of the lock is torched or cut? | I honestly have no idea. But I would imagine that if somebody has the time to bring a torch to cut it off, it will either vibrate enough to set it off, blow the tire from the heat, or do some other type of damage. There really isn't much extra room when it's on the bike and through the tire not to do at least a little damage to the wheel. |
Does it set the alarm of if the bar/ loop portion of the lock is torched or cut? | I have had this alarm for almost a year now. And I have to say this lock may have been the best investment ever. It is so sensitive that sometimes it's annoying. The wireless keychain pager is advertised as half a mile and I would agree. I have had this go off through 4 concrete walls in the back of a warehouse and alert my pager. A lot of the time is just the wind flapping my motorcycle cover. I've also had it go off from just brushing my hand against the gas tank or touching the handlebars. I set it off a lot being super careful just trying to slip the key in. I find it most effective when it is suspended in the spokes of my front tire. And I can only imagine it being more effective with the cord wound through your back tire as well or kickstand or centerstand. I hope this review helps anyone looking to make an informed decision about investing in the security of their vehicle. |
Does it set the alarm of if the bar/ loop portion of the lock is torched or cut? | Yes and no: No, damaging the loop bar itself does not inherently set off the alarm (which is what I think you are asking), but keep in mind that it would be almost impossible to cut through the loop bar (and remove it) without moving the lock body enough to set off the alarm; it's pretty sensitive. |
Does it set the alarm of if the bar/ loop portion of the lock is torched or cut? | I don't know. The alarm part of the lock stopped working around a month after I got it. I just use it as a lock only now |
it says remove plstic cap before assembling. IHow? If I try pliers it looks like I'll break it | I honestly don't recall how we got the cap off though I don't think it was a problem. If you read the directions all the way through, you'll see that if you leave the cap on, you won't be able to assemble it. Is there a YouTube video?? |
exactly which part of this supplement makes the most difference? | They all give nutritional support to glands but Iodine is primary for the thyroid. Formulas that including iodine and tyrosine are very helpful. My best recommendation is to google Dr. Brownstein. He is a leading expert in thyroid health. |
Can or can't this trap Grey Squirrels. One says yes and the other no. Which one is it. | Yes - I caught one which was the reason I purchased this. I used peanut butter. |
Can or can't this trap Grey Squirrels. One says yes and the other no. Which one is it. | I got the trap in the mail and set it that evening and had a grey squirrel by 10:00 a.m. |
Can or can't this trap Grey Squirrels. One says yes and the other no. Which one is it. | I had no luck with gray squirrels. After a while I found that they enjoyed rolling the trap to shake out the bait. The trap seems too small for large squirrels. |
Can or can't this trap Grey Squirrels. One says yes and the other no. Which one is it. | Yes, absolutely can catch grey squirrels. Use a little apple and peanut butter for bait. Put a tiny bit outside the trap a more inside the trap. After eliminating all the chipmunks in the area, I'm catching a grey squirrel almost every day I try. 10 so far ... |
Can or can't this trap Grey Squirrels. One says yes and the other no. Which one is it. | This trap is definitely effective for grey squirrels. I caught, transported and released four of them in five days, using a mixture of birdseed and raisins for bait. |
Can or can't this trap Grey Squirrels. One says yes and the other no. Which one is it. | It is large enough to trap a grey squirrel, I found that there is not enough room in back of trap for much bait. The trigger is to close to rear of trap. |
Can or can't this trap Grey Squirrels. One says yes and the other no. Which one is it. | It could be nip and tuck depending on the length of the squirrel. The squirrel's tail could interfere with the trap door closing all the way. To be on the safe side you might get the next size up.Don't forget to lead the squirrel into the trap by placing bait outside the trap. |
Can or can't this trap Grey Squirrels. One says yes and the other no. Which one is it. | I have a couple of these traps. Someone finally got it right with the trigger set up. It doesn't take much to trip it. I catch Gray Squirrels all the time. Some times as many as 4 per day.I use cheap wild bird seed I get from any store. Fill up the trigger with about half a hand full and the other half hand full is for a line from just outside the door to the trigger. I have never lost a Squirrel in this trap. I have used other brands and bigger Havaheart, but none work like this one. Well worth the money. Very sturdy too. It is all metal. No springs to wear out. The weight of the door closes it. I have a couple of these traps. Someone finally got it right with the trigger set up. It doesn't take much to trip it. I catch Gray Squirrels all the time. Some times as many as 4 per day.I use cheap wild bird seed I get from any store. Fill up the trigger with about half a hand full and the other half hand full is for a line from just outside the door to the trigger. I have never lost a Squirrel in this trap. I have used other brands and bigger Havaheart, but none work like this one. Well worth the money. Very sturdy too. It is all metal. No springs to wear out. The... » Read More I have a couple of these traps. Someone finally got it right with the trigger set up. It doesn't take much to trip it. I catch Gray Squirrels all the time. Some times as many as 4 per day.I use cheap wild bird seed I get from any store. Fill up the trigger with about half a hand full and the other half hand full is for a line from just outside the door to the trigger. I have never lost a Squirrel in this trap. I have used other brands and bigger Havaheart, but none work like this one. Well worth the money. Very sturdy too. It is all metal. No springs to wear out. The weight of the door closes it. « Show Less |
How often do I use these products? | It should say on the instructions/box. Did you not receive instructions? My husband uses daily. |
How often do I use these products? | I use it daily. Your going to love it and want to use it day after day for ever. |
Does this all-in-one have a DVD/CD media drive? | No built in DVD/CD media drive but it has two USB 3.0 ports you can connect an external blu ray/DVD/Cd Drive if you plan or want to connect other devices you may want to purchase a 3.0 hub for additional ports because it uses one for the keyboard/Mouse Wireless USB stick so you only have one available port to use. |
Does this all-in-one have a DVD/CD media drive? | This item is out of stock, and our specs does no indicate if this all-in-one is equipped with a DVD/CD or not.. |
What is the diameter of the disc? | i haven't measured it yet but the center where the gps attaches is about 4" round and with the 3 sand filled wings it is about 8 inches round and weighs about 2 lbs - hope this helps wally |
What is the diameter of the disc? | i haven't measured it yet but the center where the gps attaches is about 4" round and with the 3 sand filled wings it is about 8 inches round and weighs about 2 lbs - hope this helpswally |
What is the diameter of the disc? | The center disk has more than enough room to fit the suction cup. Not able to measure as car is not here. |
What is the diameter of the disc? | The middle disk is about 3 3/4 inches and the three extensions are like sand bags extending 2 inches from the center disk. |
If this is real thern how come it is less than half the regular retail price? It is one tenth ounce less than department stores and Oscar's web site. | Everything Online Is Cheaper Than A Department Store That's Why Customers Buy. |
If this is real thern how come it is less than half the regular retail price? It is one tenth ounce less than department stores and Oscar's web site. | Hi, Thank you very much for your interest. Because It 's one of our promotion item. We have just a few items in stock and we hope to hear from you soon. Thanks and regards,E.F.Co. |
please answer this question. Is this burner made in China or Mexico? | I really can't say where it is made, but I do know it is a lousy little burner, I returned it. |
does this 2-12 cup pot brew well when filled half or less? | I didn't like this coffee pot. I cleaned it and then it would not brew. Half of the coffee grind did not get wet. |
does this 2-12 cup pot brew well when filled half or less? | Just tried less than half full for the first time last week. It did not brew as well as I would have liked. We typically brew at least 8 cups and have never had an issue. I noticed when my husband was away for the weekend and I brewed a much smaller pot that it wasn't perking as usual. I added a little more water, it worked fine. Aside from this one issue, we loved perked coffee and have never had a bad cup using this percolator. We will purchase again, indeed, and have a back up pot on hand. |
does this 2-12 cup pot brew well when filled half or less? | Yes. I've had no problems with 6 cups or less. You do have to watch the initial boil time to percolate as it is less than 8 minutes. |
does this 2-12 cup pot brew well when filled half or less? | Sorry, i don't know as i always fill it to 8 cups. If you (haven't) purchased it yet, IMO, it's not worth the money. The handle design can get you burned... |
does this 2-12 cup pot brew well when filled half or less? | It didn't brew well at all. Used more ground coffee and brewed over 10 min and still didn't taste like coffee. |
does this 2-12 cup pot brew well when filled half or less? | It will brew just fine but if you find that it is not perking as usual, you may need a bit more water. I usually go ahead and brew at least 8 cups because it is good coffee and I can heat a cup in the microwave. Perked coffee is quite different from electric drip coffee. Of course either way, the coffee can be heated in the microwave. |
does this 2-12 cup pot brew well when filled half or less? | I have found that it brews best at the 4 cup mark. The coffee is wonderfully hot, just the way I like it. It takes a little longer than your standard electric --- but well worth the extra couple of minutes it takes. |
Matching older pair Bic America Ventura Speakers with a new center speaker help: I'm looking to add a Center speaker and was wondering if they would be tonally matched with the BIC America DV-62CLRS 6-Inch 2-Way Center Channel Speaker because they are... | The DV-62 is meant to pair with the DV64 (they actually have the same drivers). I think either the DV-62 or the FH-6 would suit you just fine. |
Has anyone used this on a motorhome? | I just use it for my Cherokee after off-roading. I'm not sure it will handle the higher pressure required for motor home tires. Guess you could try it and if it didn't work. send it back. |
Has anyone used this on a motorhome? | I have not, but it will work on any "schrader" (automotive style) valve stem equipped tire. the only issue you night have, is on a "larger" tire like a truck or motor home - because the compressor is a single stage; it is conceivable the compressor could "possible" get quite hot or over heat, from continued operation. I'm not saying this is a certainty - only a possible issue you could encounter, you may not. If so, simply give it a rest to cool down and continue operations after cooled down. No big deal. Just my thoughts. My works spectacularly on cars, motorcycles, lawn tractor - no issues. I have not, but it will work on any "schrader" (automotive style) valve stem equipped tire. the only issue you night have, is on a "larger" tire like a truck or motor home - because the compressor is a single stage; it is conceivable the compressor could "possible" get quite hot or over heat, from continued operation. I'm not saying this is a certainty - only a possible issue you could encounter, you may not. If so, simply give it a rest to cool down and continue operations after cooled down. No big deal. Just my thoughts. My works spectacularly on cars,... » Read More I have not, but it will work on any "schrader" (automotive style) valve stem equipped tire. the only issue you night have, is on a "larger" tire like a truck or motor home - because the compressor is a single stage; it is conceivable the compressor could "possible" get quite hot or over heat, from continued operation. I'm not saying this is a certainty - only a possible issue you could encounter, you may not. If so, simply give it a rest to cool down and continue operations after cooled down. No big deal. Just my thoughts. My works spectacularly on cars, motorcycles, lawn tractor - no issues. « Show Less |
Has anyone used this on a motorhome? | Not a motor home but a truck tire. It's better than anything else it's size, will work great. |
How long is the shelf life? | I don't know for sure, but I would not order this product again. It was suposed to be a box with 100 indivigually wrapped slim jims. When I got it, the box was opened anf there were only about 34-35 in the box. this is the first bad order I ever had from Amazon, and when I complained I never heard back from anyone |
How long is the shelf life? | My order was delivered on 4/5/14, and the product package has a "best by" date of 10/5/14. Your own mileage may vary :) . |
How long is the shelf life? | A looooong time. I don't know exactly but I would guess they are edible for at least a couple years. |
sd card in discovery 5v | we can send you a free 4gb tf card ,please remind us if you really placed an order. |
I have a Rascal mobility scooter, Battery part #: 8AU1H. Is this a replacement and will it work? 32 AH, 48 RC, DEKA.Thanksjohn | John G. I stand to be corrected and apologize as I was responding to another user of the same of wheelchair I use. The correct battery you need for your scooter is (I copied this from Amazon after a thorough search and confirmed through Apex Battery Co.) as follows:U1-35 AGM 12v 35ah Battery replaces 32ah, 33ah, 34ah, 36ah PS-12330 NB, 8AU1, 8AU1H, 6-FM-33, NP33-12 FR, U1-33-12B, NP35-12 FR, GH12340, WP33-12, LCL12V33BT, RA12-33, RA12-33EV, 12V35AH, Power Sonic, Yuasa, MK, Werker, Ritar |
Can someone tell me if Amazon has the bolts/nuts for use with these? Mine are super rusted. If there is can you provide part number. TY! | The best thing to do is remove and match nets and bolts at the local hardware story. GRADE 8 FOR EVERYTHING... My 93 Cherokee needed 5/8" 3 1/2" or something like that. Most auto stores don't carry a wide selection of nuts and bolts any more because the chain stores move more and sell cheaper. If there rusted replacing all shouldn't cost more that $15 and will be well worth it. Good Luck. |
Can someone tell me if Amazon has the bolts/nuts for use with these? Mine are super rusted. If there is can you provide part number. TY! | If you can't find them here, measure how long the bolt is and the diameter of the bolt. Once you do that go to your local hardware store and buy grade 8 bolts should be no more than 5 dollars. |
Can someone tell me if Amazon has the bolts/nuts for use with these? Mine are super rusted. If there is can you provide part number. TY! | No, but you can go to Lowes with the old hardware and match them up. Grade 8 nuts, bolts, washers, and lock washers. |
I was looking to get this set for my 10yr old son. He has taken several lessons. Any advice on what lb pull is best for a 10yr old? | 17-20lbs is a good weight for youth. We bought our daughter (12yrs) the 35lb weight and it took her awhile to be able to build up the strength to pull it. Lower weight is easier to start with. |
I was looking to get this set for my 10yr old son. He has taken several lessons. Any advice on what lb pull is best for a 10yr old? | Depends on his build and strength. Suggest you ask whoever gives him lessons... if they are not available, take him to a Bow shop and have them make a suggestion on draw weight. It is better to err on the side of getting a lighter draw rather than a draw that is too heavy. |
I was looking to get this set for my 10yr old son. He has taken several lessons. Any advice on what lb pull is best for a 10yr old? | Generally a ten year old would draw 20-22 inches of draw and would be comfortable with a pound pull of under 20 pounds. That means the best poundage bow for your son would be the 24# model. The 24# model is measured at 28 inches of pull therefore at 20-22 inches of draw, that bow would be 15-20 pound pull. These are generalities and you could purchase a heavier model if your son was EXTREMELY stronger than an average 10 year old. Otherwise stick with the 24#. |
Can be mounted on a wall | Hi there! Just wanted to let you know that there is an adapter bracket that makes the G206HL VESA mountable so you can mount it on the wall. VESA Mount Adapter Bracket for Acer Monitors (V2) - by HumanCentric |
Can be mounted on a wall | Nope! It has a base stand, but no bolt holes or other mounting structures in the back. It has a Kensington lock slot for security, but that is all. |
Can be mounted on a wall | Does not come with wall mounting hardware, screen is small for mounting at any distance. |
Subsets and Splits
No saved queries yet
Save your SQL queries to embed, download, and access them later. Queries will appear here once saved.