query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Does anyone have any actual experience using this heater in a golf cart? I plan to enclose the cart with a winter cover while using the heater. | No, but I used it in my tent. I would recommend using a full bottle of propane to burn what ever chemical it puts off when you first get it because the smell is awful. I am not sure how you would pin it down in their maybe screw the base down? It worked well in my tent and I think it would work in the golf cart. Good luck |
Does anyone have any actual experience using this heater in a golf cart? I plan to enclose the cart with a winter cover while using the heater. | My SportCats are very old and I can't remember if they had any smell when first put into use but for years now they give off no odor while burning. The smallest space I've used one is a small bathroom in unheated house I'm renovating (small generator for some lights and tools but they can't power electric heat.) I have a finicky nose so I would smell "off" odors. I have several CO monitors in the small, slightly ventilated areas, and they have never been set off by any of my propane catalytic heaters. |
Does it come with a mounting bracket? | Yes, take a look at the 3rd picture provided.....it has a basic "H" shaped bracket which attaches to the back of the panel plus another small plate used to connect the "H" to a surface mount. |
Does it come with a mounting bracket? | Yes it comes with a angled bracket like you would mount on a fence post.2x2 " with four holes and screws that match up with predrilled and taped holes in the solar panel then a 30 to 45 deg angle on the same piece of metal, then 4" with slotted holes in the middle for mounting to a post or other support. sturdy bracket 3/16 ? thick. I have not used my yet using a smaller 5 watt panel lower profile to the thieves that are stealing them off gates in the area. Good luck Jim |
Is this a good buy for a 5th grader (beginner) | this is a good instrument, but you must know that their are right handed and left handed flutes. is your 5th grader left handed or right handed. please research more before buying it. |
Is this a good buy for a 5th grader (beginner) | I purchased this for my 6th grader, beginning band. Checked with Band teacher and he approved. My daughter has been using it for over two months and its been perfect. No complaints and as far as I can tell, sounds no different to any other beginner flute. |
Is this a good buy for a 5th grader (beginner) | I am sure that this is a good price for an instrument, because at one time I was going to buy an instrument for my son it was was more expensive that I ended up renting the instrument. This is absolutely reasonable, my granddaughter is enjoying her flute. |
can you fax from this printer | I can't do anything with this printer. It is by far the worst printer I have ever owned. Run from this thing as fast as you can. |
can you fax from this printer | I'm looking at the printer right now, and no, It does not have a phone plugin for faxing right from the printer. however, most windows computers with modems allow you to send a fax anyway. (windows xp, 7, 8 im sure)You simply scan the document in and send it fax with a PC. Whenever you go to print a document in windows, the drop-down where you select what printer to print from also has a "fax" option. Selecting that and printing will open up a fax wizard. |
some chargers won't fit if the phone has a case on it. Will this charger work with the S3 if it has a case? | It depends on the case type. Mine has an opening and will fit with case on. |
some chargers won't fit if the phone has a case on it. Will this charger work with the S3 if it has a case? | I have a silicone case on my S3 and this charger works just fine. Another bonus is you can still receive incoming calls while charging. I have found some generic chargers will send calls to voice mail. |
is there a problem with the zipper breaking | I haven't had any problems with the zipper. They seem like pretty well put together vests. For as much as they have used them, it wasn't a bad deal. |
Does anyone know where I could find the quality of this set but with the train whistle on the hub? | I've played this game on a set with the train whistle and it was the most anoying thing you can imigine. It would be one thing if it just did a toot toot, but it toots, chuggs and make a racket for a full 30 seconds... which is a long time when being anoyed. We had to pull the batteries to make it stop. Buy this set and enjoy guiet. You'll be glad you did. |
Will these work with an I-Pod ? | They will but I will tell you that less than a month after purchase they stopped working...no sound nothing. Save you money. |
can I use the waste water to irrigate trees and plants | As far as I've learned, the waste water is equivalent to tap water. So I would say yes. In fact it may even be better because the filtered water has no micro nutrients (mag/iron etc) which are beneficial to plants needs. |
can I use the waste water to irrigate trees and plants | I'm no expert but I wouldn't recommended it, especially for any food crops. The waste water contains the concentrated minerals that have been extracted from the rest of the water. If you have "hard" or fluoridated water, that will concentrate those for example. I'm a little fuzzy on the details, but there are some water conservation adapters for this unit that result in less waste water, but I think it comes at the price of having to replace filters more often. Hope that helps. |
can I use the waste water to irrigate trees and plants | I would agree it will be at least 1000ppm if incoming water is 250ppm. Plants would probably not mind but your soil will get heavy in minerals. It is not that much water in any case. |
Does it make you drowsy? I'm looking for teas to keep me company while I study long nights without making me drowsy. | No, it never makes me drowsy. It doesn't have caffeine, though, so it doesn't particularly keep you awake. |
Does it make you drowsy? I'm looking for teas to keep me company while I study long nights without making me drowsy. | I can't answer for others.. but it doesn't make ME drowsy (unfortunately, since I am a lousy sleeper). |
Does it make you drowsy? I'm looking for teas to keep me company while I study long nights without making me drowsy. | Not at all. They do have one called Sleepy Time or something like that, but all their other flavors you can drink anytime without feeling drowsy. |
Does it make you drowsy? I'm looking for teas to keep me company while I study long nights without making me drowsy. | This is an excellent tea, especially if you enjoy a lemon flavor. It does not make you drowsy. It doesn't have caffeine. It's just an all around great tea, hot or cold. This is one of my favorite teas. |
Does it make you drowsy? I'm looking for teas to keep me company while I study long nights without making me drowsy. | This tea doesn't make you drowsy but it doesn't keep you awake for studying either. However a green tea will keep you awake because it has caffeine. A tea that will make you drowsy is camomile. |
Are the side ports, volume buttons covered? If yes, are they still functional while covered? what about the front screen? | Yes they are covered and they work perfect everytime. The screen works fine also. This is a very sturdy yet low profile cover. I love it. I have used with two phones so far and not issues so far. ( I sold my previous Galaxy 3 and it was like new this cover protected it pretty well.) |
Are the side ports, volume buttons covered? If yes, are they still functional while covered? what about the front screen? | The volume buttons are covered and functional. The bottom port and headphone jack are not covered with anything. The screen is not covered either, but a simple screen cover will do. |
I'm thinking of using this for a medium parrot,short venture. Know it has mesh sides, don't think he'll be able to grab mesh with beak. Thoughts? | Yes he will be able to peck at it and rip through if he has the interest or intention. |
Will these fit my XDS 3.3? | They fit my XDS 3.3 .45 perfectly but they are very hard to install I would highly recommend taking it to a gun smith. They have applied Red Loctite to both front and rear sights, also these sights sit much lower and the loaded chamber indicator covers a little bit of the front sight. if these sights were not so hard to change I would change them back to the factory sights. |
Will these fit my XDS 3.3? | It will fit the XDs. The problem is with installation. They are not solid steel and got beat up on install. I had to go to the trijicon big dot. |
Will these fit my XDS 3.3? | Yes they will, but your factory rear sights are installed extremely tight. I have a sight pusher that left a blemish on my slide pushing off my original rear sight. I also had to file the rear sight to install it. The sights are perfect but a little trouble to install. If you have a gunsmith that can install them, let him. My opinion only since I do all my on gunsmith work. Just don't try to beat your SDS sights off with a brass punch and hammer, you do need a sight pusher for this gun. Your gun might be different but I wouldn't force it like I did and put a blemish on the slide. |
Will these fit my XDS 3.3? | I believe they will. They fit my XDM but I took them to a gunsmith as I've heard they are extremely difficult to take off. |
Does this tablet come with the charging base or is that sold seperately? | Yes, it comes with the charging base and adaptor as well as a USB cord to plug into your computer. |
Does this tablet come with the charging base or is that sold seperately? | There is a free charging cradle that comes with every Touchsquid device. You can purchase additional cradles if you have several entertainment station in the house. |
Does this tablet come with the charging base or is that sold seperately? | It does come with the charging base, which isn't clear from the description. |
good, I already bought the player, I want to know if it comes with the connector for the car? | You'll need to buy the appropriate harness for your model of car separately. |
good, I already bought the player, I want to know if it comes with the connector for the car? | Hello. You will need to purchase an aftermarket, vehicle specific harness for your vehicle. This harness will need to be wired to the stereo harness to adapt the wiring. |
good, I already bought the player, I want to know if it comes with the connector for the car? | I think it depends on the vehicle but I actually had to buy 2 cause I couldn't find the right one:) |
good, I already bought the player, I want to know if it comes with the connector for the car? | It comes with all the wires needed to power the unit also has the wires for the speakers also has a aux red and white in the back |
Can the remote be set to transition between two specific colors? Can it be set to strobe in just one color? | No, the unit can only transition through all the colors in the color palette. It can not strobe in just one color nor can it be set to transition between just two colors. |
Can the remote be set to transition between two specific colors? Can it be set to strobe in just one color? | No. It only fades thru the entire spectrum and strobe in either white or all colors |
Can the remote be set to transition between two specific colors? Can it be set to strobe in just one color? | no..however, keep in mind that 10W LED is really a bright "night light"..i was so unhappy they got returned! |
Can the remote be set to transition between two specific colors? Can it be set to strobe in just one color? | No and no. The transition is between all colors and the strobe is only for white. |
Can the remote be set to transition between two specific colors? Can it be set to strobe in just one color? | the remote is limited, it is set to go between 3 colors. or other patterns. Will stay on one color. Have not tried the strobe function |
Can the remote be set to transition between two specific colors? Can it be set to strobe in just one color? | No, the transition goes between all colors, and no, the strobe is only white... |
I just got my copy and it was only the disk. Do I need a license for this? | No it was the original CD and installed just fine. No number like MS Office or something like that needed when installing. |
Will this fit honda shadow rs750..? | I don't think it will because it's not a sport bike with spools you will need a motorcycle lift I think |
Will this fit honda shadow rs750..? | You will need spools attached to the swing arm, plus you need to verify the overall width of your swing arm. If it is wider than 14" (with spools, it will not fit. I do NOT have an RS750, so this is just a general response. |
How big is this tent when folded up? In length. Looks to be about 3 feet and wondering for storage purposes. And I mean when its in its bag and stored. | I'd say around 3ft long. Approx 10" around. Stores very very easily on its side or on it's end. |
How big is this tent when folded up? In length. Looks to be about 3 feet and wondering for storage purposes. And I mean when its in its bag and stored. | I don't have an exact measurement as I don't have a measuring tape, but it is 3 - 3 1/2 feet long and approximately a 10"x10" square - so 36"x10"10" |
How big is this tent when folded up? In length. Looks to be about 3 feet and wondering for storage purposes. And I mean when its in its bag and stored. | I'd say about 3'x1.5 in the bag. Takes up very little space compared to other tents it's size. |
How big is this tent when folded up? In length. Looks to be about 3 feet and wondering for storage purposes. And I mean when its in its bag and stored. | When packed, the tent bag is about 9 X 9 X 36. It could be packed tighter. I just rolled it up and put it in the bag. Hope this helps. |
It's hard to tell the embroidered leaves...is the color sage green (the leaves)? Thanks! | There is a bit of green in the embroidered leaves- just a bit lighter than sage. More of an olive sage but it's beautiful! |
It's hard to tell the embroidered leaves...is the color sage green (the leaves)? Thanks! | I love this set. The leaves are more a brownish sage. I have this in my vacation home and love it. I bought the king even though my bed is a queen and used my old bed skirt because I wanted it to be longer. Not sure how long the queen is but I think the queen would have work great. |
How to Remove these without breaking them? | hi , use both hands one at 2 o clock and one at 8 o clock position at the same time yank it out ! if it is installed for a long time you may need to use some kind of spray lubricant like WD-40 around the edge but it is best not to use any thing so when you installed it back it will not pop out if you drive over a pump good luck :) |
How to Remove these without breaking them? | Patience. Start with a thin screwdriver and make sure you are at the location of a clip. Then just a little, moving from clip to clip around the wheel. It's a downside of inexpensive plastic wheel covers. |
How to Remove these without breaking them? | The hub covers are, more or less, spring loaded. If you have strong fingers you might be able to pull them off by grabbing at the edges and working it out gently; or (I'm not familiar with the tire iron that comes with your vehicle) some tire irons have a flat edge designed to pry the hub cap off. |
How to Remove these without breaking them? | I just used a large flat headed screwdriver. Got between the metal rim and the plastice cover and gently worked my way around the outside of the wheel. Hope this was able to be of some help to ya. |
It appears the downtube bar can be equipped with locks. Is this the case? If so, are the locks included? | No there were no locks included. We returned this rack because it didn't seem too stable and were affraid the bike would fall on long car rides. Hope this is helpful. |
It appears the downtube bar can be equipped with locks. Is this the case? If so, are the locks included? | You have to purchase a lock separately. It has a place for a lock that connects to the red screw handle to keep it from turning - but not just any lock. It is a specific accessory you have to purchase. But, you can also use a standard bike lock to lock your bike to the rack. As far as locking the rack to your car, this rack does not support that at all. You'd have to come up with your own solution. |
What amperage is it rated to put out, looked and cant find it anywhere. I have a PS3 that needs 5.5 amp to work and the last converter wouldnt pull it | Hey there I have a 55" Samsung UE55f6510 TV from the UK, as well as an imported Playstation 2 and Gamecube all attached to my litefuze and they all work flawlessly. Here is the exact answer you are looking for The manufacturer recommends you purchase a transformer that is 100% higher then the wattage you need.You should know that you will never damage your appliance with a higher wattage transformer, however if you buy one that is not powerful enough, it will not work. Use Amps to calculate watts Volts (times) Amps = Watts, For Example 110V x 5A = 550W Remember to leave at least a 100% slack for the transformer. Using them to maximum capacity will eventually burn the transformer out after prolonged use. Some items, such as, laser printers and power tools spike when you turn them on. For these types of situations you need to buy a transformer that is at least 3 times the items capacity. |
What amperage is it rated to put out, looked and cant find it anywhere. I have a PS3 that needs 5.5 amp to work and the last converter wouldnt pull it | Hi i think if it is 3000w it is 3000va so if you divide 3000 in the v you get your amper 220v or 110 |
is this product for dark skin people (black people )? | It's for everyone just follow the directions, my cousin did it with me and she wanted immediate results. She had "sun" burnt smile lines for a month |
is this product for dark skin people (black people )? | I wouldn't recommend this one. I am African American and Perfect Image glycolic acid peel 30% are way better and give lasting results. |
Is it a Carbide blade | Good question I really can't say if it is or not... I got them one because i love Dewalt stuff and two it came in a two pact... I put one in my Dewalt table saw and one in my Dewalt power miter box... They make nice clean cuts and I'm very satisfied... |
Is it a Carbide blade | To the best of my knowledge, NO. I was mistaken (I answered before receiving the blade, basing my response on what was posted on Amazon). The tips are carbide and the blade cuts most materials very cleanly. However be very careful with melamine. The up side chips very badily even when taped. To mitigate this issue, put the finish side down and set the cut depth to 1/2 tooth. This will vituially eliminate the chipping. |
Is it a Carbide blade | Yes they are carbide. If you would have read the details on Amazon's site you would have answered your question. |
where do you put the mouse and cable | There's not a pocket for a mouse and cable. This case is strictly for laptops only. |
Would it be possible to mount this on the back of a hollow core door, instead of using the hangers? | absolutely it can be hung and the hollow core door with anchors hope this was helpful |
Would it be possible to mount this on the back of a hollow core door, instead of using the hangers? | mine is on a hollow core door, but we have over the door hangers for it. weight might be a problem for a hollow core. also over the door allows me to take it to another room or home when we move. over the door hardware was included and does not interfere with closing the door. |
Would it be possible to mount this on the back of a hollow core door, instead of using the hangers? | I don't think it would stay. It's not real heavy, but it does gave some weight and will be even heavier with jewelry. If the door is open and closed a lot like where I have mine, I think it would strip out and fall even if you used plastic anchors. |
What is this made out of, is it BPA free? | Im not sure I know its like a hard plastic, but Im not sure about the BPA free since I do not have the packaging or anything anymore. I would try to contact seller and ask them directly |
What is this made out of, is it BPA free? | Comming from China, they do not tell me if they are BPA free. It is made out of plastic and I am sure they must use BPA to make them. |
What is this made out of, is it BPA free? | I'm not sure,made out of a hard plastic.I'm 57 & remember these when I was a child.But my granddaughter has 2 sets of these & has a fun time feeding her babies . |
What is this made out of, is it BPA free? | It is made from a hard plastic. It is exactly like what we had as children... my guess would be that it is not BPA free although I don't remember seeing it on the packaging. The bottles and the packaging seem "older" and "authentic" to my own childhood(I am 33). |
I ordered 32 oz but they gave me 1 pint, that is half of 32 oz. Should I get my money back? | Yes. without question. Amazon Customer Support is great. They will likely just send you a full quart for free no returns or anything needed. |
are they good for -20? | No. I had them on in the 20s and my hands were cold. These gloves are not good for anything cold. |
are they good for -20? | They're absolutely not good for anything below +10F. Your fingers will freeze in a hurry, and that's even if you're wearing an inner glove liner. |
are they good for -20? | For me, probably not. I'd wear them down to maybe 15F, but even then my hands got cold. |
are they good for -20? | Coldest I've experienced with them are -7°F, but they were just fine at that temperature. |
are they good for -20? | I've recently used these gloves in the mid 20s F and I could definitely feels a minor chill. Later had a cold spell of 8 F with wind chill and my hands were freezing in less than 5 minutes. This was in NYC weather. I just bought lightweight primaloft gloves which handles the same 8 F and with less expense. |
are they good for -20? | I used them for a week in Montreal, Quebec, last Christmas when the temps there were -15 to -18 F during the day. My hands were always warm and I would recommend them highly. One problem was getting them dry inside from perspiration. It was impossible to turn them inside-out, so I just used a hair dryer, and it took a while! |
are they good for -20? | I haven't worn them in anything less than 0 but I don't think they'd be able to handle -20. |
WILL THIS FIT A HP 1414 AMD 3+ b MOTHER BOARD | It fit my ASUS mainboard but some HP mainboards are not like retails boards.. I would suggest checking the actual measurements of the HP bracket and compare. |
WILL THIS FIT A HP 1414 AMD 3+ b MOTHER BOARD | As long as it is not some sort of small form-factor or mini board. This should replace any generic socket AM3 or AM3+ bracket. You should be fine. |
Does this work with Apple iPad (which IOS version)? | The keyboard does but the touch pad does not. Works with my iPad2 so am guessing it will work with any of them |
Does this work with Apple iPad (which IOS version)? | Hello,Thank you for choosing Perixx Products! The keyboard will work with the iPad. but the functionality of the touchpad wouldn't work. if you have further questions, please do not hesitate to contact us. |
Is the mug made of ceramic material only, or does it have some plastic, too? And is there a lid that comes with it? | It does come with a lid but the material that the mug is made with is some kind of ceramic material. I have no idea if there is a plastic material in it. |
Is the mug made of ceramic material only, or does it have some plastic, too? And is there a lid that comes with it? | I have the blue and green mugs. They are all ceric and work great. The lids are screw and twist on. No leaks on road trips and liquids are well maintained toe rapture wise. The lid is a type of rubberized plastic that has held up well to frequent wasing in dishwasher. This product is superb and would buy another anytime. |
Is the mug made of ceramic material only, or does it have some plastic, too? And is there a lid that comes with it? | No plastic in mug- all ceramic- and yes there is a lid (which is plastic)- This is second one my husband has owner- it is wonderful!!!! |
are they compatible with speed play pedal? | Yes, if you have the clips. If you purchase the pedal it comes with clips or the clips can be purchased separately.Enjoy your day! |
are they compatible with speed play pedal? | Yes, if you have the clips. If you purchase the pedal it comes with clips or the clips can be purchased separately. Enjoy your day! |
are they compatible with speed play pedal? | I think that they can be used with speed play pedals as long as you have the clips. I am using the Shimano SPD-SL PEDALS with cleats. |
How do i charge this headset, is wall charger included, if not then how do i charge it, and does charging work in other countries but USA | The wall charger is included and it is universal so yes it does work in other countries. There is a latch in the back of the headset in which you can use the tip of your nail to open. |
How do i charge this headset, is wall charger included, if not then how do i charge it, and does charging work in other countries but USA | A wall charger is included, but you can also use the standard android charger with the headset. |
How do i charge this headset, is wall charger included, if not then how do i charge it, and does charging work in other countries but USA | The wall charger is included. If it's used and doesn't come with the charger, any micro USB charger will work. Takes the same charger as almost all smart phones. |
Will this fit the Note 10.1 N8013 (WiFi only)? | Yes it will but it doesn't have a cut-out for the s-pen and you have to open it up to charge it....they should have made a cut-out in the case. Other than that it's a good case. |
will this remote work with apex digital model LE1910? | This is a universal remote. I'm not sureIf will work for you,but it's inexpensive enough for you to give it a try. |
will this remote work with apex digital model LE1910? | This is a universal remote. I'm not sure If will work for you,but it's inexpensive enough for you to give it a try. |
will this remote work with apex digital model LE1910? | not sure. it does come with a code sheet. I don't have the sheet anymore. I am very satisfied with it. for Mom at the nursing home. the numbers are large enough to see. Good luck |
i need the sizes on these comforters | I don't have the exact dimensions as it's inside my king duvet. However it is ample and heavy enough not to slide around inside. |
i need the sizes on these comforters | Found at the bottom of the description: Twin size 64-Inch by 80-Inch 40-OunceQueen size 92-Inch by 90-Inch 50-Ounce; King size 102-Inch by 90-Inch California King 108-Inch by 98-Inch 65-Ounce |
i need the sizes on these comforters | Twin, Queen, King, California King. When you open the site on amazon for natural comfort sets it will show the sizes at the bottom of the description area. |
Subsets and Splits
No saved queries yet
Save your SQL queries to embed, download, and access them later. Queries will appear here once saved.