query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
For 1/2 lb angle hair, how much water? So far using a enough to cover the pasta and an inch more does not work at 1100 watts. Tia | I've never cooked 1/2 pound......I usually do only 1/4 lb and it works great with just enough water to cover |
For 1/2 lb angle hair, how much water? So far using a enough to cover the pasta and an inch more does not work at 1100 watts. Tia | I don't think you're adding enough water. Also, check pasta after cooking for minimum time and add a minute or two if still not cooked sufficiently. Additionally, let the pasta stay in cooker for a few more minutes before draining. |
For 1/2 lb angle hair, how much water? So far using a enough to cover the pasta and an inch more does not work at 1100 watts. Tia | My microwave is also 1100 watts. I add a good inch of water to any pasta and cook at 90% power for the time on the box. Then check and most likely add another minute or two for al dente. Recently I cooked 12oz. ziti this way and it worked fine. |
Does it have multiple viewing angles (i.e. can you adjust the stand in the back to adjust the angle of the iPad)? | No. It's a very basic stand, but I must say that for the price, it's a really good case. Better than I expected. |
Is it easy to punch? Do I need a lot of strength to make it work? Thank you! | It depends on the thickness and quality of the leather. I have a thick leather belt and it was not easy to punch through. That being said, I don't think you need a lot of strength to use this. You need to be patient and rock the hole punch until it punctured the leather. Overall I'm very satisfied with this product. I hope this helps. |
Is it easy to punch? Do I need a lot of strength to make it work? Thank you! | It's easy as 1-2-3. Obviously the thicker the belt the harder it will be but still it's an easy to use tool. |
Is it easy to punch? Do I need a lot of strength to make it work? Thank you! | It's too easy, you have to be extremely careful because you'll make a hole before you're ready. |
Is it easy to punch? Do I need a lot of strength to make it work? Thank you! | Sorry, the answer is not so clear. It depends on the thickness of the material and how sharp your cutting die are. If i am punching 1/8" leather it requires little strength and is not difficult. However, if I have two 1/8" sheets together and want to punch a hole, it requires more that twice the strgenth. If the die is dull, then the force required increases. Hope this helps. |
Is it easy to punch? Do I need a lot of strength to make it work? Thank you! | I'm not s strong girl but ib can totally use this. that being said it does require two hands and sometimes I have to put one handle on a table and press with both handles on the other. but this one tool saved me a lot of money that I would've spent having a shoe repair shop pinch holes in all my belts after I lost weight |
Is it easy to punch? Do I need a lot of strength to make it work? Thank you! | You don't need to be that strong. Although I think it would depend on how thick the belt is too. |
Is there a difference between an "MR16" GU10 50w bulb and one just called GU10 50w? | Christina B....? what big ones are you speaking of? all these bulbs are small twist lock style...miniature 2000 or 3000 hour halogen or some are led type bulbs...what big ones??? The larger reflector spot lights that fit in the normal incandescent meadium base screw type socket are huge but those are PAR meaning parabolic reflectors style spot lights...75 watt or greater. |
Is there a difference between an "MR16" GU10 50w bulb and one just called GU10 50w? | There is no difference between the two as I have ordered both before. The MR stands for mini Reflector some of the reflector surface have facets others do not. They are all halogen bulbs...but some are not made with as good quality materials as others...the name brands you find at home depot or other big box sellers are top notch...the others are knock offs and could be made with inferior materials... |
Does it have a plastic cover to protect the screen? | Yes it does. My child has destroyed three touches, right on cue, 5 minutes in the case drops it on ceramic tile...not a scratch!! Worth the money. |
Does it have a plastic cover to protect the screen? | Yes, the screen is protected by a solid plastic (though not as thick as the rest of the case). The whole thing is also air tight. |
Does it have a plastic cover to protect the screen? | Hi Kim, This OtterBox has a thin layer of plastic over the screen. Above the screen where the camera is, has thick plastic over it so it is higher than the screen, making it almost impossible to crack or damage the screen. :) I hope this helps you out! |
Has anyone used this successfully on 10 meters? | I'm with youColtswalker. There are transmitters that qualify under Part 15 (some sold on Amazon) but not with any sort of external antenna, so....... |
Is a Culligan EZ-1 filter acceptable for the brew express bec-110? | I used an in line five year filter that I bought at Ace Hardware. Between the hardware that came with the Brew express and the hardware that came with the in line filter I had all the connectors I needed for the installation. I watched the EZ-1 installation video on YouTube and it looks like it would work quite well. Good Luck! |
Is a Culligan EZ-1 filter acceptable for the brew express bec-110? | I think any water filter that has the right Outside Diameter hose dimension should work, but you may want to call brew Express, they have an 800 number but they are only there during the week... Good luck |
Is a Culligan EZ-1 filter acceptable for the brew express bec-110? | That one looks as though it would work. We ended up going with a Watts 20,000gal in-line filter (link below). HomeDepot has it for the same price as well.Watts 5YR Premier Filter 5-Year/20,000-Gallon Inline Ice Maker Water Filter |
Why it says Number of Processors: 3? Isn't it Dual Core? | Hello! it's just ONE phisical processor, but two cores. Here: http://ark.intel.com/products/77771/Intel-Core-i3-4340-Processor-4M-Cache-3_60-GHz. regards! |
Steering wheel radio control works with this team? | I believe it does. I didn't need it. My wheel is standard. Call them directly, they are on site. My stereo is still working great but I had issues. Had to turn it off otherwise it drained the battery. |
What are the actual demisions of this unit? | According to the Infinity BassLink Owner's Manual - 14-1/2" x 12-1/2" x 8-1/2" (369mm x 318mm x 216mm) |
What holds the napkins down. I have a stand, and I need something that will hold up. I figured a weighted would work best. spring might break!! | There is an acrylic piece they lays across the top and slides down grooves so it stays in place. Worked great for the camper. |
What holds the napkins down. I have a stand, and I need something that will hold up. I figured a weighted would work best. spring might break!! | We have the holder sitting on the dining table. There is a piece of acrylic laying on top that slides down as the napkins go down. Absolutely no problems and is a quality product. You just lift the piece out when you refill the holder with napkins. Great for everyday use. |
What holds the napkins down. I have a stand, and I need something that will hold up. I figured a weighted would work best. spring might break!! | It comes with a rather nice looking acrylic bar that fits into two grooves on the side and does the job. |
How does it compare to Oral B Professional Care 5000? | I believe the base is a the same (Oral B 5000). The difference is in which brush head you will get. So with the Professional care 5000, you get the professional care brush tip. With the 5000 deep sweep, you get the deep sweep brush head. Any of the brush heads will work on a Oral B 5000, so whichever one you get, if you wished you had gotten the other, just buy the other brush head. |
How does it compare to Oral B Professional Care 5000? | Sorry, I am not familiar with the Oral B professional care 5000. Have never used it. |
How does it compare to Oral B Professional Care 5000? | called the company and there is no technical nor any studies that show it to be superior or more effective in any way to the older shaped head. |
Is it wise to buy the Accident Protection Plan ? | I did not. Sure it depends on how one handles their equipment, however in most cases I would say not. Check with Consumers Reports , they in general don't recommend extended warranties. |
Is it wise to buy the Accident Protection Plan ? | I did not. I guess it depends where you plan to travel. I have never purchased this plan with any camera. |
Is it wise to buy the Accident Protection Plan ? | Mine has endured a year's worth of normal use without problem, including travel. |
Is it wise to buy the Accident Protection Plan ? | I have always been very careful with my equipment and haven't felt the need for this type of plan |
Is it wise to buy the Accident Protection Plan ? | I did not buy the Accident Protection Plan. I think it depends on what you are going to do... If you'll be in situations where you could drop or other wise damage the camera then buy the plan. |
Where do replacement drive belts come from? This isn't a standard type belt. | Replacement belt parts for the Euro Tool (DRL-300.00) Bench-Top Drill Press are provided by Euro Tool. Type this ASIN: B00A97XFA6 into the search bar of Amazon.com and hit search to be directed to the listing page where you can view and purchase this replacement part. Please keep in mind this is not a standard type belt drive and will be difficult to replace outside of purchasing a Euro Tool replacement product. |
sony ht-ss370 vs. onkyo hts3300?! I'm looking to upgrade from my Sony HT-SS360. Wich is better? The Sony HT-SS370 or the Onkyo HTS3300? I'm open to suggestions of different HTIB's as well. As long as they're under my budget at $450 MAX. Sound quality is my main goal. Thank you, Chris O. sony ht-ss370 vs. onkyo hts3300?! I'm looking to upgrade from my Sony HT-SS360. Wich is better? The Sony HT-SS370 or the Onkyo HTS3300? I'm open to suggestions of different HTIB's as... » Read More sony ht-ss370 vs. onkyo hts3300?! I'm looking to upgrade from my Sony HT-SS360. Wich is better? The Sony HT-SS370 or the Onkyo HTS3300? I'm open to suggestions of different HTIB's as well. As long as they're under my budget at $450 MAX. Sound quality is my main goal. Thank you, Chris O. « Show Less | I'd buy the HT-S5300. It is still within your price, and is worth the premium over the 3300 |
sony ht-ss370 vs. onkyo hts3300?! I'm looking to upgrade from my Sony HT-SS360. Wich is better? The Sony HT-SS370 or the Onkyo HTS3300? I'm open to suggestions of different HTIB's as well. As long as they're under my budget at $450 MAX. Sound quality is my main goal. Thank you, Chris O. sony ht-ss370 vs. onkyo hts3300?! I'm looking to upgrade from my Sony HT-SS360. Wich is better? The Sony HT-SS370 or the Onkyo HTS3300? I'm open to suggestions of different HTIB's as... » Read More sony ht-ss370 vs. onkyo hts3300?! I'm looking to upgrade from my Sony HT-SS360. Wich is better? The Sony HT-SS370 or the Onkyo HTS3300? I'm open to suggestions of different HTIB's as well. As long as they're under my budget at $450 MAX. Sound quality is my main goal. Thank you, Chris O. « Show Less | The Sony is now $250 vs. $400 for the onkyo hts 3300. does that mean that the onkyo is now considered the better product due to demand or is sony ht - s5300 both cheaper and better? the comments re the onkyo seem more enthusiastic than for the sony. i don't own a system from either brand--researching first purchase. |
sony ht-ss370 vs. onkyo hts3300?! I'm looking to upgrade from my Sony HT-SS360. Wich is better? The Sony HT-SS370 or the Onkyo HTS3300? I'm open to suggestions of different HTIB's as well. As long as they're under my budget at $450 MAX. Sound quality is my main goal. Thank you, Chris O. sony ht-ss370 vs. onkyo hts3300?! I'm looking to upgrade from my Sony HT-SS360. Wich is better? The Sony HT-SS370 or the Onkyo HTS3300? I'm open to suggestions of different HTIB's as... » Read More sony ht-ss370 vs. onkyo hts3300?! I'm looking to upgrade from my Sony HT-SS360. Wich is better? The Sony HT-SS370 or the Onkyo HTS3300? I'm open to suggestions of different HTIB's as well. As long as they're under my budget at $450 MAX. Sound quality is my main goal. Thank you, Chris O. « Show Less | The two "cheapest" systems to consider are these...Denon DHT-391XP 5.1 Channel Home Theater System (Black) (Discontinued by Manufacturer)Onkyo HT-S5300 7.1-Channel Home Theater Receiver and Speaker Package with iPod Dock (Black) (Discontinued by Manufacturer)The Sony isn't even in the same league.If all you are going to connect is HDMI, get the Onkyo. If you have a Wii/VCR, get the Denon(it has HDMI up-conversion) |
Does it suit a kid's bike ? Where there is very limited space between the spoke to claim the head onto. | I dont know about kids bikes but it fits on the little wheel for my trailer. Because the lock is on the side it is a little wider. You may need a schrader only pump with the lock on the back. |
Does it suit a kid's bike ? Where there is very limited space between the spoke to claim the head onto. | Yes, it should be fine. It is a very good unit and it should last indefinitely. It a large unit and not really portable. |
Would this be suitable for a high-rise balcony railing or are they liable to topple? I won't want to break City ordinances and decapitate anyone. | The recess is designed for the width of a wooden deck railing. It is probably 6" wide, and flat at the "top". You are better off with the window box type that have hooks for a typical metal balcony railing. |
Would this be suitable for a high-rise balcony railing or are they liable to topple? I won't want to break City ordinances and decapitate anyone. | Depending on the railing. It is designed to fit over a 2" X 4" wooden rail. I screwed mine to the wooden rail with 4 wood screws apiece. They will also drip when you water them as there are pre-drilled holes. Unless you screw them down, or somehow affix them, I would not trust them to sit on a rail. They are however quite durable and do their job! |
Would this be suitable for a high-rise balcony railing or are they liable to topple? I won't want to break City ordinances and decapitate anyone. | I do not believe you will have any problems with it toppling off of the railing. It fits snugly if you order the right size. |
can I order extra letter kits | yes you can order extra letters they are sold seperately from the board. In fact our board has held up for several years and is still in good shape but our letters have to be replaced because we need more and they become brittle in the sun but they have been good for quite a few years. |
will the bucket keep the hot water hot for a while? | It's not insulated, so the heat does disperse. However, my wife uses it almost daily with no complaints, and she's bought our daughter one. She's had recent foot surgery due to the foot stress from being a hair stylist for several years, and she's very pleased. |
will the bucket keep the hot water hot for a while? | not for very long; suggest you keep a kettle on the stove with hot water to add to it when needed - kind of like sitting in a bathtub; have to add some hot water if want to stay for awhile |
will the bucket keep the hot water hot for a while? | I usually do foot spa for about 10 minutes. And for that time period, the water was kept at an comfortable temperature. I am not completely sure about if time going beyond that. Hope it helps. |
Can this be mounted to the front as well? | You can do anything with enough ingenuity, but simple answer, no. It would require modifications. |
Can this be mounted to the front as well? | i dont think so, but i havent tried either. however the connectors are designed for the back of the frame. i have it mounted on the back of my bike and it works great for pannier bags |
Can this be mounted to the front as well? | i am sure there would be a way to do it depending on your McGyver skills i mounted mine on my front forks after it broke sadly they do not hold much more weight than clothes or dried foods my broke with just 12 pounds in my saddle bags |
Will this hold buzzbaits too? | Not really. I suppose you could cram a few in there but it would be a tight fit and difficult to remove or replace baits. |
For 140 dollars, how many display boards are in the package? | Oops! Not a question for me. I purchased only one and was very pleased with the quality. |
will this remote work if you never had remote for your motor | You need the copilot receiver that connects to the troling motor, if there is A thing On the side that says copilot than yes you can, but all this is is a replacement remote |
will this remote work if you never had remote for your motor | I believe you have to have the v2 co-pilot system installed on your trolling motor to use a remote. This is a replacement remote. |
will this remote work if you never had remote for your motor | You have to have a co-pilot installed or already installed on your motor. I ordered my Minnkota V2 Power with an autopilot- but still had to get a co-pilot to steer with a remote transmitter. This is an older model transmitter that works on certain models . Before I bought one call Minnkota's tech number at 800-227-6433 and tell them what you have. |
will this remote work if you never had remote for your motor | Not without the co-pilot ad on, which comes with the remote to begin with. This is just a replacement remote for that accessory. |
will this remote work if you never had remote for your motor | It will work if your trolling motor has co-pilot--When you receive it you will have to hold the device near the co-pilot, hold the button in on the Co-pilot until the beeping sound stops----it will then be programed. To hold the button in will require a pointed object, its very small. George |
will this remote work if you never had remote for your motor | No you have to have the original remote and attachment for the unit this is just a replacement key fob |
will this remote work if you never had remote for your motor | You need the copilot receiver that connects to the troling motor, if there isA thing On the side that says copilot than yes you can, but all this is is a replacement remote |
Anyone use this on a Suzuki OEM luggage rack with a wide backrest? Pics and feedback? | The bag itself is nice, lots of room and pockets for different gear. However the straps would not fit around my backrest. The company offers extension straps but I used 2 rubber coated, bendable bungee cords from Auto Zone on the bottom and 2 flat bungee cords from the handles of the bag to the chrome trim. The flat cords make an ex across by backrest which turned out ok. I have a Yamaha 950 with a Mustang touring seat and a wider sissy bar with pad. Sorry, no pics. |
Do you think this can capture noise from a noisy neighbor? | Absolutely. There are levels of sensitivity in the mic and it can capture good quality sound from several yards away. |
Do you think this can capture noise from a noisy neighbor? | Yes. Bc the iPhone mic is pretty sensitive and the Mikey is at least 10 times more. Just make your settings on on your fire app. |
Do you think this can capture noise from a noisy neighbor? | I don't see why not. There are three sensitivity settings, so you shouldn't have a problem as long as you leave the unit still. |
will these filters replace hayward swimclear CX870XRE (C4020) | I'm not 100% positive, but I really believe so. I use C4025, they are the same size and if you google the difference... they are actually paired in the same number. These cartridges were a GREAT Find. Can't beat the price, and believe me I looked everywhere online and retail.. I will order these again! |
How many cups of food are in a 25.3 lb bag? | Every new bag I open, I measure out and bag all servings and return sealed ziplock baggies to feed bag. I figure this keeps them fresh. I measure and bag 4 dry cups per serving for my dogs. I average 22-1/2 four-cup bags. Total: 90 cups. All the 90 cups have it lol. |
How many cups of food are in a 25.3 lb bag? | A pound is a weight...it cannot easily be converted to a measurement like cups. Think about a pound of cotton versus a pound of lead... they take up different amounts of space but have the same weight. A cup measures how much space. I would call the company and ask them. |
How many cups of food are in a 25.3 lb bag? | That's a great question. I have no idea, but my dogs eat a total of two cups per day and a bag lasts about six weeks. The kibble pieces are pretty small, so you get more into a cup than with a "bigger" brands.Wow, my answer jives with the golden dog answer! :) |
How many cups of food are in a 25.3 lb bag? | Tim, feeding 2 young goldens 2 cups in the am, and 2 cups pm, the 25 lb bag lasts for 3 weeks. but if a cup is 8 oz, and a bag is 25 lbs, then there is 50ish cups, if my math is any good. or was this a math quiz?? |
How many cups of food are in a 25.3 lb bag? | I have nothing of value to add, I just can't believe the horrible understanding of weights and measures in a couple of these answers.. |
How many cups of food are in a 25.3 lb bag? | oh I'm not sure of the exact number, but I can tell you I feed my dog 3 cups a day (a cup an a half twice a day) an the bag lasts about a month an a half... |
How many cups of food are in a 25.3 lb bag? | Approx 90. This kibble weighs about 4.4 oz per cup. A 25.3 oz bag will have approx 90+ cups. We feed 3pups 3 cups per day each. The bag lasts 10 days. |
Is it real solid granite??? | Yes--it's very heavy as well. Make sure you have at least two people when you try to place it on the finished cart. The island is great, everything we wanted, but placing the granite on top got a little scary when it turned out a wheel wasn't in securely and popped out. Once you're past that bit, you're good. |
Is it real solid granite??? | Yes it is. It's not as thick as a countertop but it's very nice and durable. I use it every day |
does this antenna come with 15-Ft., RG58 A/U Coaxial cable with PL-259 | i had it installed professionaly but i do not recall seeing any cable. very pleased with this item |
Can anyone tell if the inner pot is made solely stainless steel? How come I read a review about the Internal coating would scape down. | since I have not the use of a lab at this time I will not state catagorically that is it one hundred persent stainless but it certainly acts like the rest of my stainless wear. Dobs |
Can anyone tell if the inner pot is made solely stainless steel? How come I read a review about the Internal coating would scape down. | It is made of stainless steel, no coating or any other thing, and really works well. You do not need to worry about it. |
Can anyone tell if the inner pot is made solely stainless steel? How come I read a review about the Internal coating would scape down. | seems to be stainless. It is not heavy though, so it is thin and not meant to be used outside the container, and treated gently. |
Can anyone tell if the inner pot is made solely stainless steel? How come I read a review about the Internal coating would scape down. | It appears to be. I have used mine several times and still apprears "stainless". Does anyone know how to use it as a "slow cooker"? |
Can anyone tell if the inner pot is made solely stainless steel? How come I read a review about the Internal coating would scape down. | The inner pot of my cooker is stainless steel and there is no coating to peel. Previously, I did own one with a teflon like coating that peeled; that's why I ordered the stainless, this time. So far, no problems. |
Can anyone tell if the inner pot is made solely stainless steel? How come I read a review about the Internal coating would scape down. | the inner pot is stainless steel. I have had no problem with it. Mine does not have an 'internal coating'. |
Can a screen protector be used with this case, or will it peel at the edges? | The screen protector works perfectly. I have on it & it doesn't peel on the edges |
Can a screen protector be used with this case, or will it peel at the edges? | You have to put it on perfectly or the edges will peel. Also the back where round opening is is actually open. I bought a cheap protector for a cellphone and cut a small square and placed over the apple logo to protect it. My upper right corner peeled at first when I put the case on but it doesn't bother me and trust me when it comes to screen covers I'm really OCD about them!! You can still smooth it out with the case on and how the case fits it kinda keeps the protector tight against the screen. |
Can a screen protector be used with this case, or will it peel at the edges? | It does peel a little bit. For me it peeled only when pressing the rubber for the volume rockers. Hope this helps. |
is the pasteurized I hope not. | It's definitely pasteurized. Meyenberg is a pasteurized brand, and the process of producing dry milk uses high heat. Dry milk and condensed milk can never be "raw". Oh and, Thomas is wrong. Raw milk from a healthy source is superior to pasteurized milk, which explains why baby cows die when they live off pasteurized milk. Raw milk is also more tolerable to people who are sensitive to pasteurized milk. Pasteurization came about thanks to industrial farming, which caused cows to become unhealthy and infected, and of course, the milk would be infected and unsafe to drink without pasteurizing it first. However, pasteurizing also alters the proteins and fats in the milk. Goat milk is especially sensitive to heat because of the fat structure, which is why Meyenberg's ultra-pasteurized goat milks taste 'goaty' while the less pasteurized brands (Summerhill, LaClare, etc..) and raw goat milk don't have that goaty flavor. Good luck! |
is the pasteurized I hope not. | This is the canned, powdered milk. It is processed with high heat, so yes, it is pasteurized first, then dried and powdered. The canned "wet" milk is also pasteurized. Let me warn you : "raw" milk is not safe nor is it any better for you or "more healthy". Food is really just simple chemistry, but then so are viruses and bacteria, which are present in raw milk. Trust me. And your body won't know the difference between "raw" and pasteurized. As we say, "it's all in your mind"! Really. Best of Luck, and thank you for asking. :) |
is the pasteurized I hope not. | "Pastuerized" is not on the package anywhere. As the process of pasteurization is about heating a liquid to kill microbes, and this is powdered milk, I'm not sure when that would happen. I am guessing, no. |
will this work with a kenwood dt-7000s and the terk sir6? | I used this extension cable to add more length between a Sirius XM reciever and its antenna to get the best reception on a south facing window sill. The cable included with the XM would'nt reach and this solved the problem. The XM reciever antenna jack is very small as is the plug end of the cable and specific for an XM. I believe that the Terk antenna and Kenwood reciever use standard FM coaxial type cable and threaded plugs which are larger than this XM antenna extension. You may use extension similar to that used for cable TV. Hope this helps. |
What does NFRS on the box mean? | My box states "not for sale in retail outlets". I assume that it means "not for retail sales". |
does this switch work with led dimmable light | If it's a dimmable led it will work. Check with your led manufacturer. I'm using this with a cfl and it works fine. You may get some flicker at low levels. |
does this switch work with led dimmable light | Not necessarily. I used this with 4 LED spotlight bulbs that I found on eBay for a few bucks a piece.The switch did not know how to handle the bulbs. The scenes wouldnt work. I was able to schedule the bulbs to turn on, but not turn off.I called SmartHome and they said LEDs are not compatible with this switch unless, of course, they are Insteon LED bulbs |
does this switch work with led dimmable light | Yes, the D in the model stands for Dimmer. You can dim incandescent or CFL/LED marked as dimmable. |
does this switch work with led dimmable light | It is working fine for me. I have it in the dinning room running about 9 LED bulbs. 8 3.5 watts and one 12.5 watts. Works great. Used this to replace an X10 dimmer that was nothing but problems. Make sure you have a load and a nuteral in your switch box. You will use 3 wires to hook this up. The nuteral is going to connect to the lamp, the dimmer and the feed. Your load is going to connect to the dimmer. Your line is going to connect to the dimmer. Think of this dimmer as an appliance with a light connected to it. Comes with great instructions. |
does this switch work with led dimmable light | This switch works the same way as a regular dimmer switch. If it works with a regular switch, then it will work with this one.Something to keep in mind: I had one of these. It only lasted 15 months. I called Insteon to complain, and they didn't do anything. Most of my insteon products haven't lasted past 2 years. Their quality is low. The replacement costs will be high. I have switched to X11 products. |
what is the difference between the harman kardon onyx studio and onyx . Have both got the same output ,clarity ?? | Hello Kevin. I have the HKO wireless. I will check online and see if they are the same devices. Maybe it the same device with a different name. Let me research and I will respond to your email. Interesting! !! |
what is the difference between the harman kardon onyx studio and onyx . Have both got the same output ,clarity ?? | Hello Kevin sorry it took so long for my reply. However, I cannot give you an honest answer because I have not experienced the sound from Onyx. I called the best buy out here in Metairie, Louisiana and was told the did not have just the Onyx. So if I were you I would rely on Katherine post. Since she's the seasoned person that can give you an answer. Good luck, the device I purchased is off the chain my friend. It got me through a boring cruise trip. Im so glad I had a chance to listen to some music with clarity and bass. Man it's the Shi_ without the stank. If you know what I mean!!!!! Buy the device it's a win win for you!!!!! Hello Kevin sorry it took so long for my reply. However, I cannot give you an honest answer because I have not experienced the sound from Onyx. I called the best buy out here in Metairie, Louisiana and was told the did not have just the Onyx. So if I were you I would rely on Katherine post. Since she's the seasoned person that can give you an answer. Good luck, the device I purchased is off the chain my friend. It got me through a boring cruise trip. Im so glad I had a chance to listen to some music with clarity and bass. Man it's the Shi_ without the stank. If you know what I mean!!!!! Buy... » Read More Hello Kevin sorry it took so long for my reply. However, I cannot give you an honest answer because I have not experienced the sound from Onyx. I called the best buy out here in Metairie, Louisiana and was told the did not have just the Onyx. So if I were you I would rely on Katherine post. Since she's the seasoned person that can give you an answer. Good luck, the device I purchased is off the chain my friend. It got me through a boring cruise trip. Im so glad I had a chance to listen to some music with clarity and bass. Man it's the Shi_ without the stank. If you know what I mean!!!!! Buy the device it's a win win for you!!!!! « Show Less |
what is the difference between the harman kardon onyx studio and onyx . Have both got the same output ,clarity ?? | The Onyx Studio is a slightly older version lacking a 3.5mm input jack. Otherwise it appears that they are assembled with the same components as far as the sound producing parts are concerned. I purchased it to use with bluetooth devices so the missing jack is not an issue. The sound is INSANE and clear. |
what is the difference between the harman kardon onyx studio and onyx . Have both got the same output ,clarity ?? | I could hear the difference when I heard through onyx but I thought onyx was too expensive. I think onyx has more channel? |
Does it cover the whole head? | No, as you can see in the picture there is a strap across the back. It covers about 80% of the head. |
Will these sights fit a S&W 9mm Shield, and if so would there be any overhang on the rear sight? | No these won't. Ameriglo does make a shield specific model that I have on my shield, but you have to buy thru them. |
Can this antenna help out well with FM radio band reception? If I'm not mistaken, the FM radio band is within the VHF band, so I'm guessing it could? | Yes, this antenna can be used for FM. It is directional so needs to be pointed toward the FM station towers you want to receive. |
Can this antenna help out well with FM radio band reception? If I'm not mistaken, the FM radio band is within the VHF band, so I'm guessing it could? | You have to get a splitter to connect to the cable and then to the radio. So your radio has to have an external hard-wire antenna connection for this to work. It should improve the reception given that you are reasonably pointed to the radio tower with line of sight. Good luck. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.