query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
How much does this jacket weigh? Is the shell made of tough ripstop material? Is the Omni-heat lining visible inside the jacket? | The jacket is made of a very soft outer material, and does not appear to be extremely tough. It is lightweight, does not feel heavy, although the jacket is very warm. The lining is visible on the inside as shinny panels. I have a cheaper Down Jacket that I purchased at Sam's years ago that is similar, although it is more comfortable. I never get too hot in that jacket, and I never get cold in our East Tennessee Winters. This Columbia Jacket will probably be warmer and especially useful in colder climates. Wearing it inside only so far, I got hot in a hurry! I also purchased a Carhart Down Jacket that does have a shell made of a much tougher material, but not quite as rough or coarse as the normal Carhart jacket. The Columbia one has a lot of nice features, and I think that I am going to like it. |
Is the item listed for sale here the "clear" version? | It goes on milky white and dries clear. At least it has done that on all my oak logs i saw on the mill. |
Is the item listed for sale here the "clear" version? | No, I don't think this would be considered the clear version. This was my first order of ANCHORSEAL, so I have nothing to compare it with. It was not clear , more like cream. But after it dries on the wood, the wood grain shows through. I have used it and I like the results. |
Is the item listed for sale here the "clear" version? | Upon opening the can, you will see a thick white liquid. It paints onto wood as a thin milky layer, then clears up to a thin waxy layer. After drying, one can see no more white and can see the wood colors and grains. It darkens the wood at the end of a log just a little but just as if you had put clear lacquer or polyurethane. You might say it enriches the end grain if a log. It doesn't affect the underlying wood deeply, only at the surface. |
Does it work on universal voltage 110/240 volts? | This is what is printed on the back: Battery Charger CB-2LY Input: 100v-240v AC 50/60Hz Output: 4.2v=0.7A From this it would appear it does. |
Does it work on universal voltage 110/240 volts? | Based on what is printed on the back,(100v-240v), I would say yes. Hope this helps... |
Does it work on universal voltage 110/240 volts? | This is what is printed on the back:Battery Charger CB-2LYInput: 100v-240v AC 50/60HzOutput: 4.2v=0.7AFrom this it would appear it does. |
the list of ingredients is all chemicals. There is not mention of any flowers why is this. | Today perfume Smells are synthetically created rather than using flowers etc. And alcohol of course for drying |
the list of ingredients is all chemicals. There is not mention of any flowers why is this. | Most perfumes are proprietary and trade secrets, just like Kentucky Fried Chicken doesn't list their specific spices and herbs. |
The description states this queen size topper is 80 x 60. Not undercut 1-2" like most pads. Is that correct? | Covers my queen mattress very well -- it also fits under my original mattress cover. This mattress pad was originally purchased to cover a queen bed in a travel trailer. Because the trailer is not used in the winter -- the pad was brought to the house to make the queen bed there more comfortable. Not willing to give up the added comfort at home now - so, purchasing another one for the trailer. |
Are the feet covered in rubber to protect countertops? Some reviews say yes, some no. Thanks | No, the feet are not covered in rubber nor any protective material. I have mine on an acyrlic surface countertop and it has not scratched it. Since the feet are rounded, the smooth metal sits on the countertop, not the cut ends. |
Are the feet covered in rubber to protect countertops? Some reviews say yes, some no. Thanks | Mine does have clear plastic around each of the feet. It doesn't scratch my granite countertops. I'am very happy with it. |
Are the feet covered in rubber to protect countertops? Some reviews say yes, some no. Thanks | Mine had little rubber caps on the feet. One came off but a dab of glue solved the problem. I *LOVE* my basket! I now live in the tropics and have fresh fruits and veggies in it all the time. It's not only functional but very attractive too. I highly recommend it. Wish I had bought two! |
Are the feet covered in rubber to protect countertops? Some reviews say yes, some no. Thanks | My first one came with only one rubber foot (and did not sit right) but I returned for one that came with three. |
Hi, I'm looking for the Bulb for the Lincoln popper, I know its a Heat Bulb, any idea were I could get one?? | i found a replacement at http://www.batteriesplus.com/. It is a bulb and battery store |
How big of a room is this reccomended for? | I have used mine in bedroom areas as well as main living areas between 300-1000. The amount of concentration of oil aroma will be appropriate to room size. I am very happy with my diffusor. |
How big of a room is this reccomended for? | I bought this diffuser a year ago and it seems to serve one small room. I use it in either my kitchen, living room or bedroom. Of course, the type and amount of essential oils used will determine the strength of fragrance, but this unit puts out a hearty burst of mist. I've been very pleased with this unit so far, but again, it will not serve a huge room or multiple rooms at the same time. |
I am not clear if this is a wrap around or do you have to lift mattress to get it over the whole box spring? | The ruffled bed skirt has a thick elastic band that stretches completely around the box spring. On three sides of the elastic is the fabric to correspond with the two sides and bottom edge of the box spring. The elastic that goes behind the box spring has no ruffle on it just the elastic. Very easy to put on. The thing I like about the ruffle is that it is about 16-18" long as we have a higher box spring/frame and needed the extra length. Hope this helps. |
I am not clear if this is a wrap around or do you have to lift mattress to get it over the whole box spring? | It does wrap around three sides of the box spring. I didn't have to lift the mattress at all. I do recommend purchasing the twist pins do it doesn't shift! Hope this helps. |
I am not clear if this is a wrap around or do you have to lift mattress to get it over the whole box spring? | It wraps around. It has elastic all around, with the skirt on 3 sides. Just elastic at the head of the bed. It's easy to put on. I used twist pins to hold it in place a little better though. |
will it fit for Mercedes E320 1999 indash bulbs | I have no clue. I drive a Honda. Check the manual or electrical layout for the car to see if it uses that bulb |
What is the size of the opening that cuts your hair? Length & width? | It's a 2 inch circle. You turn this unit on, and just run it all over your head! It's fantastic .takes me 5 minutes. It's the best money I've ever spent. |
What is the size of the opening that cuts your hair? Length & width? | It is a circle that fits attachments also circular. The circle is about 1 inch in diameter. |
I have a Logitech mouse with a small receiver that sticks out about .25" on my 14" Lenovo X1 carbon. How much leeway is there on the sides? | I have a 15" Acer v3 and there is about 1/2 to 3/4 of and inch of space all the way around. you could probably put the wireless receiver loose in the case too if it didn't fit while still in the USB slot. |
I have a Logitech mouse with a small receiver that sticks out about .25" on my 14" Lenovo X1 carbon. How much leeway is there on the sides? | I have a Lenovo as well. Absolutely no extra room for anything. It is a very snug fit. |
I have a Logitech mouse with a small receiver that sticks out about .25" on my 14" Lenovo X1 carbon. How much leeway is there on the sides? | No leeway. I returned the case because it fit very tightly, without any projections on my computer. |
I have a Logitech mouse with a small receiver that sticks out about .25" on my 14" Lenovo X1 carbon. How much leeway is there on the sides? | Well I don't know exactly what the problem is but the case that I have fits my laptop fine. If you have .25" well if the case you don't fit just see if you find one that fits your computer. |
The description says ideal for flat yards. My yard is on an incline of about 20 percent, will it still work? | Our yard is fairly flat so cannot answer with certainty. I'd assume the placement of the unit would be the thing, even if you had to place it on the ground. It would also depend on the amount of incline. |
The description says ideal for flat yards. My yard is on an incline of about 20 percent, will it still work? | Our driveway drops off to the field where our dog did his business and we didn't have any problems with the fence along that area. |
The product stats that it is preloaded with avg US electricity costs, but is there a way to select or enter in the specific energy cost of your area? | Yes. You can manually input your cost per kWh and it will incorporate it into its calculations. |
The product stats that it is preloaded with avg US electricity costs, but is there a way to select or enter in the specific energy cost of your area? | Yes. Its preloaded with the average cost per kWh but you adjust it to what u pay per kWh to the nearest $0.001. |
What is the best case for the tr slim? | That's based entirely on your preference. I myself have the OtterBox commuter case and it fits perfectly. I couldn't be happier. |
will these fit tristar c100 9mm | I doubt it, the C100 is a clone of the compact CZ, not the full size. And these grips are for a full size CZ. |
How long do you bake the little cakes? | I baked them the same as cupcakes...a little more for the big one, a little less for the smallest |
Would this unit be adequate for testing pond water for: Cryptosporidium, Giardia, E. coli, Poliovirus, etc; to determine if it is a potable source? | I would not use it for that purpose. You should always treat water in outside sources before drinking. |
Would this unit be adequate for testing pond water for: Cryptosporidium, Giardia, E. coli, Poliovirus, etc; to determine if it is a potable source? | No...the lighting and optics are not powerful enough, will certainly do Protozoa, but not much smaller than that. |
if I want to use detangler first, then a leave in conditioner on my ends (to prevent split ends), can I use this after that - then blow-dry? | I don't use those two products, but I do use several others and have never had a problem with any combination. |
if I want to use detangler first, then a leave in conditioner on my ends (to prevent split ends), can I use this after that - then blow-dry? | You should be able to. I use another thickening solution first (Cell-U-Plex's "Thicker Fuller Hair") and then squirt on the Rusk before drying. The two together seem to be the only thing that holds my baby-fine hair. I've learned the right amount of each to use. You might want to experiment, adjusting as you go. Good luck! |
if I want to use detangler first, then a leave in conditioner on my ends (to prevent split ends), can I use this after that - then blow-dry? | You should be able to. I use another thickening solution first (Cell-U-Plex's "Thicker Fuller Hair") and then squirt on the Rusk before drying. The two together seem to be the only thing that holds my baby-fine hair.I've learned the right amount of each to use. You might want to experiment, adjusting as you go. Good luck! |
Is this set ideal to use with hair that has been treated with keratin? | Absolutely! My hair hasn't been healthier since I started using this. I also use the Joico Keratin oil before drying. |
"This camera is not ideally suited to wi-fi environments, etc." Do those things ointerfere with the camera or does the camera interfere with them? | This camera works fine with hifi. It's operating in my sill since 6 months. Once mounted, Idid not care for. No problem with my laptops, samartphones smarttv whatsoever. And all the devices are operating with wifi thru my wifi box. No interferences at all. Hope this helps. Sincerely if it does not work, it's because YOU had done something wrong. Its not the device. |
"This camera is not ideally suited to wi-fi environments, etc." Do those things ointerfere with the camera or does the camera interfere with them? | Yes, to Le Thuc Dai. You can get an excellent picture if you follow the directions carefully and completely. This means choosing the best channel and using same channel on both, then fine tuning the picture with the lens wrench. Also, wifi signals and the camera/receiver signals are on different bandwidths/wavelengths and power. Wifi signals transmit between 100-500mW, while the camera/receiver transmit from 2-10mW. |
"This camera is not ideally suited to wi-fi environments, etc." Do those things ointerfere with the camera or does the camera interfere with them? | This is junk. Don't buy it. I had it right next to it with wifi not on and still doesn't work properly. |
"This camera is not ideally suited to wi-fi environments, etc." Do those things ointerfere with the camera or does the camera interfere with them? | This camera works fine with hifi. It's operating in my sill since 6 months. Once mounted, Idid not care for. No problem with my laptops, samartphones smarttv whatsoever. And all the devices are operating with wifi thru my wifi box. No interferences at all.Hope this helps. Sincerely if it does not work, it's because YOU had done something wrong. Its not the device. |
Will this fit Syrian hamsters? | Well, I'm really not sure. I bought it for a lizard and it was too tight for him. My guess is it just might be perfect for a syrian hamster, but not having one I can't say for certain. Sorry |
Will this fit Syrian hamsters? | That particular harness is too large for any hamster. It's perfect for a rat, though. |
Does it come with the rock formation that hides/decorates the filter? | This one does not. If u look at the picture of the box, in the bottom corner there is a pic of a green stand up filter- that's what this one looks like. Same company make the one u are referring to though. |
Does it come with the rock formation that hides/decorates the filter? | No. When I purchase this item, it did not come with the rock formation. But, I purchased two of these and I love the filters. They do a great job at keeping my turtle tank clean and are easy to clean and maintain. They are much quieter than the filters I had before and I like that if the power goes out as it often does in my area that I don't have to prime the filters with water to get them going. They just start back up when the power kicks on!! |
will the headlight I am ordering fit a 2008 volkswagen new beetle | more info, design changed 2006. your part should be 1C0941029N FOR LEFT, 1C0941030N FOR RIGHT. hope this helps. |
will the headlight I am ordering fit a 2008 volkswagen new beetle | Works great on my 2003! Fairly easy install with the help of YouTube and I've had no problems. |
will the headlight I am ordering fit a 2008 volkswagen new beetle | The one, I ordered fit fine very nice. if they say the noumbers are right i would Try it. I wish I had replaced both Fixturesat the same time. It would save me changing bulbs on a regular basis, and would have both looked new. |
I have an O4 Avalanche and want to go to 4.10s is this carrier capable of adapting to that or do I need a spacer. | Yes, gear ratio is not relevant to the carrier.When I bought mine, I installed Richmond 4.10s |
I have an O4 Avalanche and want to go to 4.10s is this carrier capable of adapting to that or do I need a spacer. | If you have a 410 ring and pinion for the gm-10 bolt. 8.5 or 8.6. It will bolt right up. |
Will these work with my Ipod 2g? | i am not sure if they will work. I got them to use on ipod touch 4th gen and iphone 4s and they worked great. I have also used them on an iphone 3gs. I haven't had any issues with them. I have had them for atleast 6-9 months and the first one I used just stopped working last week actually and I had to grab another one. I would definitely buy these again as all of mine worked and they were a great price. I'm sorry I can't elaborate on your specific ipod but I would imagine if it uses the same cord as the iphone 4s and the ipod 4th gens we have then it should work. I hope this helps you out!! |
On an APS-C camera will this 35mm lens become a 56mm? | Optically, yes. An APS-C sensor will see just the center of the lens' light cone, which is the sharpest part of the projected image. The trade off, of course, is that the field of view is not quite as wide. |
this tablet can use micro sd? thank you | The keyboard dock takes a full size SD card. You can get a SD card adapter that will take a micro SD card. |
Does it filter chemicals, and if so how well? Any recommendations on models that do filter chemicals? | It does filter some types of chemicals. I bought it to filter water in a survival situation, so I mainly wanted it to filter protozoa and the like. I would suggest some type of charcoal filter system for better tasting water and chemical filtering. I must tell you that I am no expert. I only know what I have read. I hope this helps. |
Does it filter chemicals, and if so how well? Any recommendations on models that do filter chemicals? | I haven't tried it on different chemicals but I did try it on city tap water that had a heavy chlorine taste. After using the filter, the water tasted much better. No hint of chemical taste. Just remember with this product. If you are hiking, the filter is moving around loosening so pump 4 or 5 times before pumping into your bottle/camel pack. I like this one. My buddies MSR doesn't even come close to the taste I get from the Hiker pro. |
what length of rope will it hold? | I have a 40m rope and their is all kinds of room in it. But it is a 8.4mm. I have bigger ropes in the 10. mm range that should have no problem - in the 40m to 60m range. |
Can the Fusion Pro-glide MANUAL blades be used? Anyone try the Manual ones on a Power handle? | The cartridges are interchangeable in terms of all fitting a Fusion handle, but the cartridges are NOT exactly the same. Just like Schick's Quattro line, the "power" cartridge is distinguished from the "manual" one by a small row that's supposed to help stretch out the face for a closer shave (per Schick's marketing) or to help guide the hair to the blade (per Gillette's marking) . Gillette calls this row a "microcomb." Gillette also claims that the ProGlide (both manual and power) Fusion blades are more advanced than the original Fusion blades, with sharper, thinner blades. They all seem to do a good job to me. |
is this made in the USA? BPA free? | Not sure about the made in the USA part. But from what I have researched I believe YES it is BPA free. |
What is meant by "macro" for this lens. It works fine on my XSI, but there is no way to get close to small objects like coins or stamps. | Not meant exactly for Marco photo. But it supports picture taken for closer objects. I have taken few of them. |
What is meant by "macro" for this lens. It works fine on my XSI, but there is no way to get close to small objects like coins or stamps. | Don't try to stand right over the coin close up but stand back and use the zoom to get close up to the coin |
Does this fan make much noise? I am looking to use it on vacation for white noise because I don't sleep well with no noise. | It makes a small amount of noise the blades make a bit more noise on high I used mine durning our hunting season and the batteries lasted all season and them spme |
Does this fan make much noise? I am looking to use it on vacation for white noise because I don't sleep well with no noise. | Of course there is a whirring sound, but not loud. I'm a light sleeper and I do well with it when I need it,(mostly when the power is out in the summer). I think it would be perfect for vacation. |
Does this fan make much noise? I am looking to use it on vacation for white noise because I don't sleep well with no noise. | It makes a whirring noise, yes. It is not, in my opinion, as loud as a large fan and other, louder noises, like a TV can drown it out some. If you are using it with no other noise happening, like if you're in bed or at a play or movie theatre, it would sound like "white noise" and could probably annoy the people around you. As an aside, moving the base back and forth causes a pretty loud "ratcheting" sound as well. That one's unavoidable and loud. |
Does this fan make much noise? I am looking to use it on vacation for white noise because I don't sleep well with no noise. | The fan has a low "hum"...not real loud, but probably would be suitable for white noise. |
Does this fan make much noise? I am looking to use it on vacation for white noise because I don't sleep well with no noise. | It's not quiet... sounds louder than a computer fan.. not terrible but it is noisy |
Does this fan make much noise? I am looking to use it on vacation for white noise because I don't sleep well with no noise. | It is a great fan wish I could get another on. Just a little noic=se, and it helps to put it on a towel or something soft so it doesn't referburate on a table. |
When I use the wall charger to charge, the LED lights don't light up, so I don't know if the batteries are charging or not. Is this normal? | Seems like you may have a problem, the lights on my charger have lit up every time I plug it in. There is a possibility the wall piece itself is bad though. Maybe try another USB charger an see if it works. Or put dead batteries in it leave it for roughly an hour an try them again to see if they have taken a charge. |
When I use the wall charger to charge, the LED lights don't light up, so I don't know if the batteries are charging or not. Is this normal? | No, the LEDs should light. Try reseating the batteries, sometimes they don't line up right. They should light red initially then change to green after they are finished charging. |
INSTRUCTIONS ON HOW TO USE IT | plug it in - turn the dial to the highest setting -this heats the iron and crisps the waffle. Make batter and pour into iron. Do not over fill. Close iron and rotate - do not flip back until finished - about 6 minutes on the first waffle and then about 5 minutes for waffles after that. Hope this helps - the first few are difficult but afar a little practice it is a great iron |
How big is the box it comes in? Can one person carry it up the stairs? | The full size 8 inch thick came in a box 17" x17" x39" the shipping weight was 50.1 lbs.it can be moved around by tilting it and walking it on one end fairly easily by one person. |
How big is the box it comes in? Can one person carry it up the stairs? | I am going by memory... I want to say it was 2' wide by 4' (or the width of the mattress as I bought a twin). The mattress is rolled up so its really compacted in the box. I wouldn't carry it myself up stairs but a bigger stronger person could for sure. |
How big is the box it comes in? Can one person carry it up the stairs? | you'll be able to get it up the stairs no problem. make sure you have it next to your bed frame, when you cut the packaging it's going to expand quickly |
How big is the box it comes in? Can one person carry it up the stairs? | I am a 115lb woman and I just basically tipped the box end on end up my flight of stairs with no problem for the full size mattress. |
How big is the box it comes in? Can one person carry it up the stairs? | The mattress has all the air out of it and comes in a fairly small I am 5'1" and I carried up my stairs by my self. |
How big is the box it comes in? Can one person carry it up the stairs? | You can probably carry upstairs with difficulty. Box is like 4 feet long and would be awkward to carry by yourself. |
If I order this item what is left to hook up or remove and replace from my old phone? | With the help of a YouTube video I did it in about 90 minutes. Not terribly complicated but you do have to be careful in unscrewing/removing all parts. This digitizer comes with the frame, so all you have to keep from your old phone is the camera, vibrating rotor, sensors, etc. Search "Galaxy S4 digitizer replacement" on YouTube and you will be able to figure it out, good luck and hope this helps! |
I just bought a 2010 Honda CR-V. Will it fit this model well (I don't want to buy it if I'm going to have to jimmy it in there)? | Hi Leigh, my CRV is a 2011 model and it fits perfect, apparently the item fits models 2007 To 2011. I am very happy with mine it is amazing how much it holds. If you purchase it and you find it has an odor as some reviews stated it did. I can let you know what I used on it and it took the odor out overnight and left no residue on the item. Jocelyn H |
How do you play the game using the cards and morpher? | Just learned the Morpher has a game board...Sorry didnt know, I have a 5yr ol that teaches me things lol...but I reviewed how to play the game on you tube and its very informative...definitely for older children to understand it all...good luck! |
How do you play the game using the cards and morpher? | it just reads whats on the card...the ranger morpher morph into different power rangers with the card changes |
How do you play the game using the cards and morpher? | The Morpher has a several cards but it does not have a game board or instructions on how to play the game. The game board with scant instructions has to be purchased separately which I bought via "Power Rangers Megaforce Action Card Game Starter Deck Rise of Heroes". The manufacturer's website however has a tutorial that helps explain the flow of play and it can be found at: http://www.bandai.com/powerrangers/cards/en/Tutorial |
How do you play the game using the cards and morpher? | Thanks for responding but they actually are used with a game board, you can learn how to use them with the game board which is included in starter decks. See the game board as it is used with the cards in the tutorial at: http://www.bandai.com/powerrangers/cards/en/Tutorial |
How do you play the game using the cards and morpher? | The cards are just for fun in case kids want to change "ranger". They are of no real purpose. Morpher has its own voice. Repeat of same few phrases. |
How do you play the game using the cards and morpher? | Theres not a board game...it functions with imagination for the child...as seen on the power ranger shows on Netflix |
do i need an adapter to connect wirelessly to netflix? | Yes. The set does not have a wireless network adapter built-in. It does have a USB port, and Panasonic sells a USB wireless adapter that will add wireless capability, however the wireless adapter is rather pricey compared to a "standard" USB wireless adapter. |
I have a DELL Dimension E520 2x Intel(R) Pentium(R) 4 CPU 3.06GHz Memory 2040MB BIOS 2.12 Will Intel Core 2 Quad Q6600 work in it? | I don't believe so.........the motherboard will support certain Core 2 Duo CPUs but not Quad Core CPUs. |
I have a DELL Dimension E520 2x Intel(R) Pentium(R) 4 CPU 3.06GHz Memory 2040MB BIOS 2.12 Will Intel Core 2 Quad Q6600 work in it? | Doesn't matter what computer have as long as you have a motherboard that ssupports lga 775 |
What are the dimensions or size of the saucer? Thanks... | 5, 15/16 inches in diameter, and 7/8 inches from table to edge of rim. I've had my set 4 years plus, and they're really great. Made in USA, with the quality one would expect. Enjoy! - a.c. in ND |
Why then, in the product description, do the dimensions say 19.5 x 13.5? | I believe that is the dimension of the box in which they are (well) packaged. |
Why then, in the product description, do the dimensions say 19.5 x 13.5? | The DPA111 grids that I reviewed are 12.5"X17"X2 1/4". I don't know why the difference in the dimensions given. I agree with the other answerer, they may be talking about the "shipped" size. The important thing is that they say that they fit the size 3 grill. Mine is a P3.I hope that this helps. |
Has anyone tried cutting a hole in a wine bottle with this? | I thought about cutting a hole in a wine bottle but I think it would be pretty tricky, you could do it but it would be difficult because it needs a flat surface to stabilize it. I bought this to cut a hole in the bottom of a glass decanter and I gave up (probable because I lack patience) but it was moving around a lot more than I had hoped. |
Does anyone know if they're made from food grade plastic? ...I want to use them for condiments. Perhaps there is a recycle number? ...or "BPA-free"? | Not sure about that but I do know that lotion and thicker soap does not pump very well - I had to put thin soap in it |
Are the labels optional or are they already attached to the wood? | The holes are already drilled but the label holders do not need to be put on. You can contact the manufacturer for stickers that match the finish, to put over the holes. |
approx. how far will the laser shoot | In daylight about 1 inch in dark or low light conditions I have tested out to about 25yards and still see it. As you add light the range drops. Hope this helps even though I don't have a max effective range for you. |
approx. how far will the laser shoot | have never taken it out to check how far, it is very visible at 25 yards at the shooting range. |
approx. how far will the laser shoot | I can hit trees with the laser at about 1/4 mile away (might go further). You have to kind of track the laser starting from close up and walk it to that distance other wise it is hard to pick up. |
approx. how far will the laser shoot | I was about 150ft from the wood line by my house and when I shined the light it lite up so bright that I could see the individual sticks and twigs coming off the tree. So it's very bright. Up close if u shine it in someone's eyes they see spots for a few seconds. I'm very pleased with it. |
approx. how far will the laser shoot | I have been able to tag trees and houses at well over 1200yd. But I haven't tried sighting in and shooting past 800yd with my m&p10; .308 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.