text
stringlengths 938
1.05M
|
|---|
/*
*
* Copyright (c) 2011 [email protected]
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 [email protected]
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 [email protected]
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 [email protected]
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 [email protected]
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 [email protected]
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 [email protected]
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
// -- (c) Copyright 2012 -2013 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// File name: axi_protocol_converter.v
//
// Description:
// This module is a bank of AXI4-Lite and AXI3 protocol converters for a vectored AXI interface.
// The interface of this module consists of a vectored slave and master interface
// which are each concatenations of upper-level AXI pathways,
// plus various vectored parameters.
// This module instantiates a set of individual protocol converter modules.
//
//-----------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_axi_protocol_converter #(
parameter C_FAMILY = "virtex6",
parameter integer C_M_AXI_PROTOCOL = 0,
parameter integer C_S_AXI_PROTOCOL = 0,
parameter integer C_IGNORE_ID = 0,
// 0 = RID/BID are stored by axilite_conv.
// 1 = RID/BID have already been stored in an upstream device, like SASD crossbar.
parameter integer C_AXI_ID_WIDTH = 4,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_WRITE = 1,
parameter integer C_AXI_SUPPORTS_READ = 1,
parameter integer C_AXI_SUPPORTS_USER_SIGNALS = 0,
// 1 = Propagate all USER signals, 0 = Dont propagate.
parameter integer C_AXI_AWUSER_WIDTH = 1,
parameter integer C_AXI_ARUSER_WIDTH = 1,
parameter integer C_AXI_WUSER_WIDTH = 1,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_AXI_BUSER_WIDTH = 1,
parameter integer C_TRANSLATION_MODE = 1
// 0 (Unprotected) = Disable all error checking; master is well-behaved.
// 1 (Protection) = Detect SI transaction violations, but perform no splitting.
// AXI4 -> AXI3 must be <= 16 beats; AXI4/3 -> AXI4LITE must be single.
// 2 (Conversion) = Include transaction splitting logic
) (
// Global Signals
input wire aclk,
input wire aresetn,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_awid,
input wire [C_AXI_ADDR_WIDTH-1:0] s_axi_awaddr,
input wire [((C_S_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] s_axi_awlen,
input wire [3-1:0] s_axi_awsize,
input wire [2-1:0] s_axi_awburst,
input wire [((C_S_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] s_axi_awlock,
input wire [4-1:0] s_axi_awcache,
input wire [3-1:0] s_axi_awprot,
input wire [4-1:0] s_axi_awregion,
input wire [4-1:0] s_axi_awqos,
input wire [C_AXI_AWUSER_WIDTH-1:0] s_axi_awuser,
input wire s_axi_awvalid,
output wire s_axi_awready,
// Slave Interface Write Data Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_wid,
input wire [C_AXI_DATA_WIDTH-1:0] s_axi_wdata,
input wire [C_AXI_DATA_WIDTH/8-1:0] s_axi_wstrb,
input wire s_axi_wlast,
input wire [C_AXI_WUSER_WIDTH-1:0] s_axi_wuser,
input wire s_axi_wvalid,
output wire s_axi_wready,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] s_axi_bid,
output wire [2-1:0] s_axi_bresp,
output wire [C_AXI_BUSER_WIDTH-1:0] s_axi_buser,
output wire s_axi_bvalid,
input wire s_axi_bready,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_arid,
input wire [C_AXI_ADDR_WIDTH-1:0] s_axi_araddr,
input wire [((C_S_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] s_axi_arlen,
input wire [3-1:0] s_axi_arsize,
input wire [2-1:0] s_axi_arburst,
input wire [((C_S_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] s_axi_arlock,
input wire [4-1:0] s_axi_arcache,
input wire [3-1:0] s_axi_arprot,
input wire [4-1:0] s_axi_arregion,
input wire [4-1:0] s_axi_arqos,
input wire [C_AXI_ARUSER_WIDTH-1:0] s_axi_aruser,
input wire s_axi_arvalid,
output wire s_axi_arready,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] s_axi_rid,
output wire [C_AXI_DATA_WIDTH-1:0] s_axi_rdata,
output wire [2-1:0] s_axi_rresp,
output wire s_axi_rlast,
output wire [C_AXI_RUSER_WIDTH-1:0] s_axi_ruser,
output wire s_axi_rvalid,
input wire s_axi_rready,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] m_axi_awid,
output wire [C_AXI_ADDR_WIDTH-1:0] m_axi_awaddr,
output wire [((C_M_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] m_axi_awlen,
output wire [3-1:0] m_axi_awsize,
output wire [2-1:0] m_axi_awburst,
output wire [((C_M_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] m_axi_awlock,
output wire [4-1:0] m_axi_awcache,
output wire [3-1:0] m_axi_awprot,
output wire [4-1:0] m_axi_awregion,
output wire [4-1:0] m_axi_awqos,
output wire [C_AXI_AWUSER_WIDTH-1:0] m_axi_awuser,
output wire m_axi_awvalid,
input wire m_axi_awready,
// Master Interface Write Data Ports
output wire [C_AXI_ID_WIDTH-1:0] m_axi_wid,
output wire [C_AXI_DATA_WIDTH-1:0] m_axi_wdata,
output wire [C_AXI_DATA_WIDTH/8-1:0] m_axi_wstrb,
output wire m_axi_wlast,
output wire [C_AXI_WUSER_WIDTH-1:0] m_axi_wuser,
output wire m_axi_wvalid,
input wire m_axi_wready,
// Master Interface Write Response Ports
input wire [C_AXI_ID_WIDTH-1:0] m_axi_bid,
input wire [2-1:0] m_axi_bresp,
input wire [C_AXI_BUSER_WIDTH-1:0] m_axi_buser,
input wire m_axi_bvalid,
output wire m_axi_bready,
// Master Interface Read Address Port
output wire [C_AXI_ID_WIDTH-1:0] m_axi_arid,
output wire [C_AXI_ADDR_WIDTH-1:0] m_axi_araddr,
output wire [((C_M_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] m_axi_arlen,
output wire [3-1:0] m_axi_arsize,
output wire [2-1:0] m_axi_arburst,
output wire [((C_M_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] m_axi_arlock,
output wire [4-1:0] m_axi_arcache,
output wire [3-1:0] m_axi_arprot,
output wire [4-1:0] m_axi_arregion,
output wire [4-1:0] m_axi_arqos,
output wire [C_AXI_ARUSER_WIDTH-1:0] m_axi_aruser,
output wire m_axi_arvalid,
input wire m_axi_arready,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] m_axi_rid,
input wire [C_AXI_DATA_WIDTH-1:0] m_axi_rdata,
input wire [2-1:0] m_axi_rresp,
input wire m_axi_rlast,
input wire [C_AXI_RUSER_WIDTH-1:0] m_axi_ruser,
input wire m_axi_rvalid,
output wire m_axi_rready
);
localparam P_AXI4 = 32'h0;
localparam P_AXI3 = 32'h1;
localparam P_AXILITE = 32'h2;
localparam P_AXILITE_SIZE = (C_AXI_DATA_WIDTH == 32) ? 3'b010 : 3'b011;
localparam P_INCR = 2'b01;
localparam P_DECERR = 2'b11;
localparam P_SLVERR = 2'b10;
localparam integer P_PROTECTION = 1;
localparam integer P_CONVERSION = 2;
wire s_awvalid_i;
wire s_arvalid_i;
wire s_wvalid_i ;
wire s_bready_i ;
wire s_rready_i ;
wire s_awready_i;
wire s_wready_i;
wire s_bvalid_i;
wire [C_AXI_ID_WIDTH-1:0] s_bid_i;
wire [1:0] s_bresp_i;
wire [C_AXI_BUSER_WIDTH-1:0] s_buser_i;
wire s_arready_i;
wire s_rvalid_i;
wire [C_AXI_ID_WIDTH-1:0] s_rid_i;
wire [1:0] s_rresp_i;
wire [C_AXI_RUSER_WIDTH-1:0] s_ruser_i;
wire [C_AXI_DATA_WIDTH-1:0] s_rdata_i;
wire s_rlast_i;
generate
if ((C_M_AXI_PROTOCOL == P_AXILITE) || (C_S_AXI_PROTOCOL == P_AXILITE)) begin : gen_axilite
assign m_axi_awid = 0;
assign m_axi_awlen = 0;
assign m_axi_awsize = P_AXILITE_SIZE;
assign m_axi_awburst = P_INCR;
assign m_axi_awlock = 0;
assign m_axi_awcache = 0;
assign m_axi_awregion = 0;
assign m_axi_awqos = 0;
assign m_axi_awuser = 0;
assign m_axi_wid = 0;
assign m_axi_wlast = 1'b1;
assign m_axi_wuser = 0;
assign m_axi_arid = 0;
assign m_axi_arlen = 0;
assign m_axi_arsize = P_AXILITE_SIZE;
assign m_axi_arburst = P_INCR;
assign m_axi_arlock = 0;
assign m_axi_arcache = 0;
assign m_axi_arregion = 0;
assign m_axi_arqos = 0;
assign m_axi_aruser = 0;
if (((C_IGNORE_ID == 1) && (C_TRANSLATION_MODE != P_CONVERSION)) || (C_S_AXI_PROTOCOL == P_AXILITE)) begin : gen_axilite_passthru
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = 0;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = 0;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = 0;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = 1'b1;
assign s_ruser_i = 0;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end else if (C_TRANSLATION_MODE == P_CONVERSION) begin : gen_b2s_conv
assign s_buser_i = {C_AXI_BUSER_WIDTH{1'b0}};
assign s_ruser_i = {C_AXI_RUSER_WIDTH{1'b0}};
axi_protocol_converter_v2_1_b2s #(
.C_S_AXI_PROTOCOL (C_S_AXI_PROTOCOL),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ)
) axilite_b2s (
.aresetn (aresetn),
.aclk (aclk),
.s_axi_awid (s_axi_awid),
.s_axi_awaddr (s_axi_awaddr),
.s_axi_awlen (s_axi_awlen),
.s_axi_awsize (s_axi_awsize),
.s_axi_awburst (s_axi_awburst),
.s_axi_awprot (s_axi_awprot),
.s_axi_awvalid (s_awvalid_i),
.s_axi_awready (s_awready_i),
.s_axi_wdata (s_axi_wdata),
.s_axi_wstrb (s_axi_wstrb),
.s_axi_wlast (s_axi_wlast),
.s_axi_wvalid (s_wvalid_i),
.s_axi_wready (s_wready_i),
.s_axi_bid (s_bid_i),
.s_axi_bresp (s_bresp_i),
.s_axi_bvalid (s_bvalid_i),
.s_axi_bready (s_bready_i),
.s_axi_arid (s_axi_arid),
.s_axi_araddr (s_axi_araddr),
.s_axi_arlen (s_axi_arlen),
.s_axi_arsize (s_axi_arsize),
.s_axi_arburst (s_axi_arburst),
.s_axi_arprot (s_axi_arprot),
.s_axi_arvalid (s_arvalid_i),
.s_axi_arready (s_arready_i),
.s_axi_rid (s_rid_i),
.s_axi_rdata (s_rdata_i),
.s_axi_rresp (s_rresp_i),
.s_axi_rlast (s_rlast_i),
.s_axi_rvalid (s_rvalid_i),
.s_axi_rready (s_rready_i),
.m_axi_awaddr (m_axi_awaddr),
.m_axi_awprot (m_axi_awprot),
.m_axi_awvalid (m_axi_awvalid),
.m_axi_awready (m_axi_awready),
.m_axi_wdata (m_axi_wdata),
.m_axi_wstrb (m_axi_wstrb),
.m_axi_wvalid (m_axi_wvalid),
.m_axi_wready (m_axi_wready),
.m_axi_bresp (m_axi_bresp),
.m_axi_bvalid (m_axi_bvalid),
.m_axi_bready (m_axi_bready),
.m_axi_araddr (m_axi_araddr),
.m_axi_arprot (m_axi_arprot),
.m_axi_arvalid (m_axi_arvalid),
.m_axi_arready (m_axi_arready),
.m_axi_rdata (m_axi_rdata),
.m_axi_rresp (m_axi_rresp),
.m_axi_rvalid (m_axi_rvalid),
.m_axi_rready (m_axi_rready)
);
end else begin : gen_axilite_conv
axi_protocol_converter_v2_1_axilite_conv #(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH)
) axilite_conv_inst (
.ARESETN (aresetn),
.ACLK (aclk),
.S_AXI_AWID (s_axi_awid),
.S_AXI_AWADDR (s_axi_awaddr),
.S_AXI_AWPROT (s_axi_awprot),
.S_AXI_AWVALID (s_awvalid_i),
.S_AXI_AWREADY (s_awready_i),
.S_AXI_WDATA (s_axi_wdata),
.S_AXI_WSTRB (s_axi_wstrb),
.S_AXI_WVALID (s_wvalid_i),
.S_AXI_WREADY (s_wready_i),
.S_AXI_BID (s_bid_i),
.S_AXI_BRESP (s_bresp_i),
.S_AXI_BUSER (s_buser_i),
.S_AXI_BVALID (s_bvalid_i),
.S_AXI_BREADY (s_bready_i),
.S_AXI_ARID (s_axi_arid),
.S_AXI_ARADDR (s_axi_araddr),
.S_AXI_ARPROT (s_axi_arprot),
.S_AXI_ARVALID (s_arvalid_i),
.S_AXI_ARREADY (s_arready_i),
.S_AXI_RID (s_rid_i),
.S_AXI_RDATA (s_rdata_i),
.S_AXI_RRESP (s_rresp_i),
.S_AXI_RLAST (s_rlast_i),
.S_AXI_RUSER (s_ruser_i),
.S_AXI_RVALID (s_rvalid_i),
.S_AXI_RREADY (s_rready_i),
.M_AXI_AWADDR (m_axi_awaddr),
.M_AXI_AWPROT (m_axi_awprot),
.M_AXI_AWVALID (m_axi_awvalid),
.M_AXI_AWREADY (m_axi_awready),
.M_AXI_WDATA (m_axi_wdata),
.M_AXI_WSTRB (m_axi_wstrb),
.M_AXI_WVALID (m_axi_wvalid),
.M_AXI_WREADY (m_axi_wready),
.M_AXI_BRESP (m_axi_bresp),
.M_AXI_BVALID (m_axi_bvalid),
.M_AXI_BREADY (m_axi_bready),
.M_AXI_ARADDR (m_axi_araddr),
.M_AXI_ARPROT (m_axi_arprot),
.M_AXI_ARVALID (m_axi_arvalid),
.M_AXI_ARREADY (m_axi_arready),
.M_AXI_RDATA (m_axi_rdata),
.M_AXI_RRESP (m_axi_rresp),
.M_AXI_RVALID (m_axi_rvalid),
.M_AXI_RREADY (m_axi_rready)
);
end
end else if ((C_M_AXI_PROTOCOL == P_AXI3) && (C_S_AXI_PROTOCOL == P_AXI4)) begin : gen_axi4_axi3
axi_protocol_converter_v2_1_axi3_conv #(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_USER_SIGNALS (C_AXI_SUPPORTS_USER_SIGNALS),
.C_AXI_AWUSER_WIDTH (C_AXI_AWUSER_WIDTH),
.C_AXI_ARUSER_WIDTH (C_AXI_ARUSER_WIDTH),
.C_AXI_WUSER_WIDTH (C_AXI_WUSER_WIDTH),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ),
.C_SUPPORT_SPLITTING ((C_TRANSLATION_MODE == P_CONVERSION) ? 1 : 0)
) axi3_conv_inst (
.ARESETN (aresetn),
.ACLK (aclk),
.S_AXI_AWID (s_axi_awid),
.S_AXI_AWADDR (s_axi_awaddr),
.S_AXI_AWLEN (s_axi_awlen),
.S_AXI_AWSIZE (s_axi_awsize),
.S_AXI_AWBURST (s_axi_awburst),
.S_AXI_AWLOCK (s_axi_awlock),
.S_AXI_AWCACHE (s_axi_awcache),
.S_AXI_AWPROT (s_axi_awprot),
.S_AXI_AWQOS (s_axi_awqos),
.S_AXI_AWUSER (s_axi_awuser),
.S_AXI_AWVALID (s_awvalid_i),
.S_AXI_AWREADY (s_awready_i),
.S_AXI_WDATA (s_axi_wdata),
.S_AXI_WSTRB (s_axi_wstrb),
.S_AXI_WLAST (s_axi_wlast),
.S_AXI_WUSER (s_axi_wuser),
.S_AXI_WVALID (s_wvalid_i),
.S_AXI_WREADY (s_wready_i),
.S_AXI_BID (s_bid_i),
.S_AXI_BRESP (s_bresp_i),
.S_AXI_BUSER (s_buser_i),
.S_AXI_BVALID (s_bvalid_i),
.S_AXI_BREADY (s_bready_i),
.S_AXI_ARID (s_axi_arid),
.S_AXI_ARADDR (s_axi_araddr),
.S_AXI_ARLEN (s_axi_arlen),
.S_AXI_ARSIZE (s_axi_arsize),
.S_AXI_ARBURST (s_axi_arburst),
.S_AXI_ARLOCK (s_axi_arlock),
.S_AXI_ARCACHE (s_axi_arcache),
.S_AXI_ARPROT (s_axi_arprot),
.S_AXI_ARQOS (s_axi_arqos),
.S_AXI_ARUSER (s_axi_aruser),
.S_AXI_ARVALID (s_arvalid_i),
.S_AXI_ARREADY (s_arready_i),
.S_AXI_RID (s_rid_i),
.S_AXI_RDATA (s_rdata_i),
.S_AXI_RRESP (s_rresp_i),
.S_AXI_RLAST (s_rlast_i),
.S_AXI_RUSER (s_ruser_i),
.S_AXI_RVALID (s_rvalid_i),
.S_AXI_RREADY (s_rready_i),
.M_AXI_AWID (m_axi_awid),
.M_AXI_AWADDR (m_axi_awaddr),
.M_AXI_AWLEN (m_axi_awlen),
.M_AXI_AWSIZE (m_axi_awsize),
.M_AXI_AWBURST (m_axi_awburst),
.M_AXI_AWLOCK (m_axi_awlock),
.M_AXI_AWCACHE (m_axi_awcache),
.M_AXI_AWPROT (m_axi_awprot),
.M_AXI_AWQOS (m_axi_awqos),
.M_AXI_AWUSER (m_axi_awuser),
.M_AXI_AWVALID (m_axi_awvalid),
.M_AXI_AWREADY (m_axi_awready),
.M_AXI_WID (m_axi_wid),
.M_AXI_WDATA (m_axi_wdata),
.M_AXI_WSTRB (m_axi_wstrb),
.M_AXI_WLAST (m_axi_wlast),
.M_AXI_WUSER (m_axi_wuser),
.M_AXI_WVALID (m_axi_wvalid),
.M_AXI_WREADY (m_axi_wready),
.M_AXI_BID (m_axi_bid),
.M_AXI_BRESP (m_axi_bresp),
.M_AXI_BUSER (m_axi_buser),
.M_AXI_BVALID (m_axi_bvalid),
.M_AXI_BREADY (m_axi_bready),
.M_AXI_ARID (m_axi_arid),
.M_AXI_ARADDR (m_axi_araddr),
.M_AXI_ARLEN (m_axi_arlen),
.M_AXI_ARSIZE (m_axi_arsize),
.M_AXI_ARBURST (m_axi_arburst),
.M_AXI_ARLOCK (m_axi_arlock),
.M_AXI_ARCACHE (m_axi_arcache),
.M_AXI_ARPROT (m_axi_arprot),
.M_AXI_ARQOS (m_axi_arqos),
.M_AXI_ARUSER (m_axi_aruser),
.M_AXI_ARVALID (m_axi_arvalid),
.M_AXI_ARREADY (m_axi_arready),
.M_AXI_RID (m_axi_rid),
.M_AXI_RDATA (m_axi_rdata),
.M_AXI_RRESP (m_axi_rresp),
.M_AXI_RLAST (m_axi_rlast),
.M_AXI_RUSER (m_axi_ruser),
.M_AXI_RVALID (m_axi_rvalid),
.M_AXI_RREADY (m_axi_rready)
);
assign m_axi_awregion = 0;
assign m_axi_arregion = 0;
end else if ((C_S_AXI_PROTOCOL == P_AXI3) && (C_M_AXI_PROTOCOL == P_AXI4)) begin : gen_axi3_axi4
assign m_axi_awid = s_axi_awid;
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awlen = {4'h0, s_axi_awlen[3:0]};
assign m_axi_awsize = s_axi_awsize;
assign m_axi_awburst = s_axi_awburst;
assign m_axi_awlock = s_axi_awlock[0];
assign m_axi_awcache = s_axi_awcache;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awregion = 4'h0;
assign m_axi_awqos = s_axi_awqos;
assign m_axi_awuser = s_axi_awuser;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wid = {C_AXI_ID_WIDTH{1'b0}} ;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wlast = s_axi_wlast;
assign m_axi_wuser = s_axi_wuser;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = m_axi_bid;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = m_axi_buser;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_arid = s_axi_arid;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arlen = {4'h0, s_axi_arlen[3:0]};
assign m_axi_arsize = s_axi_arsize;
assign m_axi_arburst = s_axi_arburst;
assign m_axi_arlock = s_axi_arlock[0];
assign m_axi_arcache = s_axi_arcache;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arregion = 4'h0;
assign m_axi_arqos = s_axi_arqos;
assign m_axi_aruser = s_axi_aruser;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = m_axi_rid;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = m_axi_rlast;
assign s_ruser_i = m_axi_ruser;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end else begin :gen_no_conv
assign m_axi_awid = s_axi_awid;
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awlen = s_axi_awlen;
assign m_axi_awsize = s_axi_awsize;
assign m_axi_awburst = s_axi_awburst;
assign m_axi_awlock = s_axi_awlock;
assign m_axi_awcache = s_axi_awcache;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awregion = s_axi_awregion;
assign m_axi_awqos = s_axi_awqos;
assign m_axi_awuser = s_axi_awuser;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wid = s_axi_wid;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wlast = s_axi_wlast;
assign m_axi_wuser = s_axi_wuser;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = m_axi_bid;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = m_axi_buser;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_arid = s_axi_arid;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arlen = s_axi_arlen;
assign m_axi_arsize = s_axi_arsize;
assign m_axi_arburst = s_axi_arburst;
assign m_axi_arlock = s_axi_arlock;
assign m_axi_arcache = s_axi_arcache;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arregion = s_axi_arregion;
assign m_axi_arqos = s_axi_arqos;
assign m_axi_aruser = s_axi_aruser;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = m_axi_rid;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = m_axi_rlast;
assign s_ruser_i = m_axi_ruser;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end
if ((C_TRANSLATION_MODE == P_PROTECTION) &&
(((C_S_AXI_PROTOCOL != P_AXILITE) && (C_M_AXI_PROTOCOL == P_AXILITE)) ||
((C_S_AXI_PROTOCOL == P_AXI4) && (C_M_AXI_PROTOCOL == P_AXI3)))) begin : gen_err_detect
wire e_awvalid;
reg e_awvalid_r;
wire e_arvalid;
reg e_arvalid_r;
wire e_wvalid;
wire e_bvalid;
wire e_rvalid;
reg e_awready;
reg e_arready;
wire e_wready;
reg [C_AXI_ID_WIDTH-1:0] e_awid;
reg [C_AXI_ID_WIDTH-1:0] e_arid;
reg [8-1:0] e_arlen;
wire [C_AXI_ID_WIDTH-1:0] e_bid;
wire [C_AXI_ID_WIDTH-1:0] e_rid;
wire e_rlast;
wire w_err;
wire r_err;
wire busy_aw;
wire busy_w;
wire busy_ar;
wire aw_push;
wire aw_pop;
wire w_pop;
wire ar_push;
wire ar_pop;
reg s_awvalid_pending;
reg s_awvalid_en;
reg s_arvalid_en;
reg s_awready_en;
reg s_arready_en;
reg [4:0] aw_cnt;
reg [4:0] ar_cnt;
reg [4:0] w_cnt;
reg w_borrow;
reg err_busy_w;
reg err_busy_r;
assign w_err = (C_M_AXI_PROTOCOL == P_AXILITE) ? (s_axi_awlen != 0) : ((s_axi_awlen>>4) != 0);
assign r_err = (C_M_AXI_PROTOCOL == P_AXILITE) ? (s_axi_arlen != 0) : ((s_axi_arlen>>4) != 0);
assign s_awvalid_i = s_axi_awvalid & s_awvalid_en & ~w_err;
assign e_awvalid = e_awvalid_r & ~busy_aw & ~busy_w;
assign s_arvalid_i = s_axi_arvalid & s_arvalid_en & ~r_err;
assign e_arvalid = e_arvalid_r & ~busy_ar ;
assign s_wvalid_i = s_axi_wvalid & (busy_w | (s_awvalid_pending & ~w_borrow));
assign e_wvalid = s_axi_wvalid & err_busy_w;
assign s_bready_i = s_axi_bready & busy_aw;
assign s_rready_i = s_axi_rready & busy_ar;
assign s_axi_awready = (s_awready_i & s_awready_en) | e_awready;
assign s_axi_wready = (s_wready_i & (busy_w | (s_awvalid_pending & ~w_borrow))) | e_wready;
assign s_axi_bvalid = (s_bvalid_i & busy_aw) | e_bvalid;
assign s_axi_bid = err_busy_w ? e_bid : s_bid_i;
assign s_axi_bresp = err_busy_w ? P_SLVERR : s_bresp_i;
assign s_axi_buser = err_busy_w ? {C_AXI_BUSER_WIDTH{1'b0}} : s_buser_i;
assign s_axi_arready = (s_arready_i & s_arready_en) | e_arready;
assign s_axi_rvalid = (s_rvalid_i & busy_ar) | e_rvalid;
assign s_axi_rid = err_busy_r ? e_rid : s_rid_i;
assign s_axi_rresp = err_busy_r ? P_SLVERR : s_rresp_i;
assign s_axi_ruser = err_busy_r ? {C_AXI_RUSER_WIDTH{1'b0}} : s_ruser_i;
assign s_axi_rdata = err_busy_r ? {C_AXI_DATA_WIDTH{1'b0}} : s_rdata_i;
assign s_axi_rlast = err_busy_r ? e_rlast : s_rlast_i;
assign busy_aw = (aw_cnt != 0);
assign busy_w = (w_cnt != 0);
assign busy_ar = (ar_cnt != 0);
assign aw_push = s_awvalid_i & s_awready_i & s_awready_en;
assign aw_pop = s_bvalid_i & s_bready_i;
assign w_pop = s_wvalid_i & s_wready_i & s_axi_wlast;
assign ar_push = s_arvalid_i & s_arready_i & s_arready_en;
assign ar_pop = s_rvalid_i & s_rready_i & s_rlast_i;
always @(posedge aclk) begin
if (~aresetn) begin
s_awvalid_en <= 1'b0;
s_arvalid_en <= 1'b0;
s_awready_en <= 1'b0;
s_arready_en <= 1'b0;
e_awvalid_r <= 1'b0;
e_arvalid_r <= 1'b0;
e_awready <= 1'b0;
e_arready <= 1'b0;
aw_cnt <= 0;
w_cnt <= 0;
ar_cnt <= 0;
err_busy_w <= 1'b0;
err_busy_r <= 1'b0;
w_borrow <= 1'b0;
s_awvalid_pending <= 1'b0;
end else begin
e_awready <= 1'b0; // One-cycle pulse
if (e_bvalid & s_axi_bready) begin
s_awvalid_en <= 1'b1;
s_awready_en <= 1'b1;
err_busy_w <= 1'b0;
end else if (e_awvalid) begin
e_awvalid_r <= 1'b0;
err_busy_w <= 1'b1;
end else if (s_axi_awvalid & w_err & ~e_awvalid_r & ~err_busy_w) begin
e_awvalid_r <= 1'b1;
e_awready <= ~(s_awready_i & s_awvalid_en); // 1-cycle pulse if awready not already asserted
s_awvalid_en <= 1'b0;
s_awready_en <= 1'b0;
end else if ((&aw_cnt) | (&w_cnt) | aw_push) begin
s_awvalid_en <= 1'b0;
s_awready_en <= 1'b0;
end else if (~err_busy_w & ~e_awvalid_r & ~(s_axi_awvalid & w_err)) begin
s_awvalid_en <= 1'b1;
s_awready_en <= 1'b1;
end
if (aw_push & ~aw_pop) begin
aw_cnt <= aw_cnt + 1;
end else if (~aw_push & aw_pop & (|aw_cnt)) begin
aw_cnt <= aw_cnt - 1;
end
if (aw_push) begin
if (~w_pop & ~w_borrow) begin
w_cnt <= w_cnt + 1;
end
w_borrow <= 1'b0;
end else if (~aw_push & w_pop) begin
if (|w_cnt) begin
w_cnt <= w_cnt - 1;
end else begin
w_borrow <= 1'b1;
end
end
s_awvalid_pending <= s_awvalid_i & ~s_awready_i;
e_arready <= 1'b0; // One-cycle pulse
if (e_rvalid & s_axi_rready & e_rlast) begin
s_arvalid_en <= 1'b1;
s_arready_en <= 1'b1;
err_busy_r <= 1'b0;
end else if (e_arvalid) begin
e_arvalid_r <= 1'b0;
err_busy_r <= 1'b1;
end else if (s_axi_arvalid & r_err & ~e_arvalid_r & ~err_busy_r) begin
e_arvalid_r <= 1'b1;
e_arready <= ~(s_arready_i & s_arvalid_en); // 1-cycle pulse if arready not already asserted
s_arvalid_en <= 1'b0;
s_arready_en <= 1'b0;
end else if ((&ar_cnt) | ar_push) begin
s_arvalid_en <= 1'b0;
s_arready_en <= 1'b0;
end else if (~err_busy_r & ~e_arvalid_r & ~(s_axi_arvalid & r_err)) begin
s_arvalid_en <= 1'b1;
s_arready_en <= 1'b1;
end
if (ar_push & ~ar_pop) begin
ar_cnt <= ar_cnt + 1;
end else if (~ar_push & ar_pop & (|ar_cnt)) begin
ar_cnt <= ar_cnt - 1;
end
end
end
always @(posedge aclk) begin
if (s_axi_awvalid & ~err_busy_w & ~e_awvalid_r ) begin
e_awid <= s_axi_awid;
end
if (s_axi_arvalid & ~err_busy_r & ~e_arvalid_r ) begin
e_arid <= s_axi_arid;
e_arlen <= s_axi_arlen;
end
end
axi_protocol_converter_v2_1_decerr_slave #
(
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_AXI_PROTOCOL (C_S_AXI_PROTOCOL),
.C_RESP (P_SLVERR),
.C_IGNORE_ID (C_IGNORE_ID)
)
decerr_slave_inst
(
.ACLK (aclk),
.ARESETN (aresetn),
.S_AXI_AWID (e_awid),
.S_AXI_AWVALID (e_awvalid),
.S_AXI_AWREADY (),
.S_AXI_WLAST (s_axi_wlast),
.S_AXI_WVALID (e_wvalid),
.S_AXI_WREADY (e_wready),
.S_AXI_BID (e_bid),
.S_AXI_BRESP (),
.S_AXI_BUSER (),
.S_AXI_BVALID (e_bvalid),
.S_AXI_BREADY (s_axi_bready),
.S_AXI_ARID (e_arid),
.S_AXI_ARLEN (e_arlen),
.S_AXI_ARVALID (e_arvalid),
.S_AXI_ARREADY (),
.S_AXI_RID (e_rid),
.S_AXI_RDATA (),
.S_AXI_RRESP (),
.S_AXI_RUSER (),
.S_AXI_RLAST (e_rlast),
.S_AXI_RVALID (e_rvalid),
.S_AXI_RREADY (s_axi_rready)
);
end else begin : gen_no_err_detect
assign s_awvalid_i = s_axi_awvalid;
assign s_arvalid_i = s_axi_arvalid;
assign s_wvalid_i = s_axi_wvalid;
assign s_bready_i = s_axi_bready;
assign s_rready_i = s_axi_rready;
assign s_axi_awready = s_awready_i;
assign s_axi_wready = s_wready_i;
assign s_axi_bvalid = s_bvalid_i;
assign s_axi_bid = s_bid_i;
assign s_axi_bresp = s_bresp_i;
assign s_axi_buser = s_buser_i;
assign s_axi_arready = s_arready_i;
assign s_axi_rvalid = s_rvalid_i;
assign s_axi_rid = s_rid_i;
assign s_axi_rresp = s_rresp_i;
assign s_axi_ruser = s_ruser_i;
assign s_axi_rdata = s_rdata_i;
assign s_axi_rlast = s_rlast_i;
end // gen_err_detect
endgenerate
endmodule
`default_nettype wire
|
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 03/10/2016 04:46:19 PM
// Design Name:
// Module Name: exp_operation
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Exp_Operation
#(parameter EW = 8) //Exponent Width
(
input wire clk, //system clock
input wire rst, //reset of the module
input wire load_a_i,
input wire load_b_i,
input wire [EW-1:0] Data_A_i,
input wire [EW-1:0] Data_B_i,
input wire Add_Subt_i,
///////////////////////////////////////////////////////////////////77
output wire [EW-1:0] Data_Result_o,
output wire Overflow_flag_o,
output wire Underflow_flag_o
);
//wire [EW-1:0] Data_B;
wire [EW:0] Data_S;
/////////////////////////////////////////7
//genvar j;
//for (j=0; j<EW; j=j+1)begin
// assign Data_B[j] = PreData_B_i[j] ^ Add_Subt_i;
//end
/////////////////////////////////////////
add_sub_carry_out #(.W(EW)) exp_add_subt(
.op_mode (Add_Subt_i),
.Data_A (Data_A_i),
.Data_B (Data_B_i),
.Data_S (Data_S)
);
//assign Overflow_flag_o = 1'b0;
//assign Underflow_flag_o = 1'b0;
Comparators #(.W_Exp(EW+1)) array_comparators(
.exp(Data_S),
.overflow(Overflow_flag),
.underflow(Underflow_flag)
);
RegisterAdd #(.W(EW)) exp_result(
.clk (clk),
.rst (rst),
.load (load_a_i),
.D (Data_S[EW-1:0]),
.Q (Data_Result_o)
);
RegisterAdd #(.W(1)) Overflow (
.clk(clk),
.rst(rst),
.load(load_a_i),
.D(Overflow_flag),
.Q(Overflow_flag_o)
);
RegisterAdd #(.W(1)) Underflow (
.clk(clk),
.rst(rst),
.load(load_b_i),
.D(Underflow_flag),
.Q(Underflow_flag_o)
);
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
// This is a component of pluto_servo, a PWM servo driver and quadrature
// counter for emc2
// Copyright 2006 Jeff Epler <[email protected]>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
module main(clk, led, nConfig, epp_nReset, pport_data, nWrite, nWait, nDataStr,
nAddrStr, dout, din, step, dir);
parameter W=10;
parameter F=11;
parameter T=4;
input clk;
output led, nConfig;
inout [7:0] pport_data;
input nWrite;
output nWait;
input nDataStr, nAddrStr, epp_nReset;
input [15:0] din;
reg Spolarity;
reg[13:0] real_dout; output [13:0] dout = do_tristate ? 14'bZ : real_dout;
wire[3:0] real_step; output [3:0] step = do_tristate ? 4'bZ : real_step ^ {4{Spolarity}};
wire[3:0] real_dir; output [3:0] dir = do_tristate ? 4'bZ : real_dir;
wire [W+F-1:0] pos0, pos1, pos2, pos3;
reg [F:0] vel0, vel1, vel2, vel3;
reg [T-1:0] dirtime, steptime;
reg [1:0] tap;
reg [10:0] div2048;
wire stepcnt = ~|(div2048[5:0]);
always @(posedge clk) begin
div2048 <= div2048 + 1'd1;
end
wire do_enable_wdt, do_tristate;
wdt w(clk, do_enable_wdt, &div2048, do_tristate);
stepgen #(W,F,T) s0(clk, stepcnt, pos0, vel0, dirtime, steptime, real_step[0], real_dir[0], tap);
stepgen #(W,F,T) s1(clk, stepcnt, pos1, vel1, dirtime, steptime, real_step[1], real_dir[1], tap);
stepgen #(W,F,T) s2(clk, stepcnt, pos2, vel2, dirtime, steptime, real_step[2], real_dir[2], tap);
stepgen #(W,F,T) s3(clk, stepcnt, pos3, vel3, dirtime, steptime, real_step[3], real_dir[3], tap);
// EPP stuff
wire EPP_write = ~nWrite;
wire EPP_read = nWrite;
wire EPP_addr_strobe = ~nAddrStr;
wire EPP_data_strobe = ~nDataStr;
wire EPP_strobe = EPP_data_strobe | EPP_addr_strobe;
wire EPP_wait; assign nWait = ~EPP_wait;
wire [7:0] EPP_datain = pport_data;
wire [7:0] EPP_dataout; assign pport_data = EPP_dataout;
reg [4:0] EPP_strobe_reg;
always @(posedge clk) EPP_strobe_reg <= {EPP_strobe_reg[3:0], EPP_strobe};
wire EPP_strobe_edge1 = (EPP_strobe_reg[2:1]==2'b01);
// reg led;
assign EPP_wait = EPP_strobe_reg[4];
wire[15:0] EPP_dataword = {EPP_datain, lowbyte};
reg[4:0] addr_reg;
reg[7:0] lowbyte;
always @(posedge clk)
if(EPP_strobe_edge1 & EPP_write & EPP_addr_strobe) begin
addr_reg <= EPP_datain[4:0];
end
else if(EPP_strobe_edge1 & !EPP_addr_strobe) addr_reg <= addr_reg + 4'd1;
always @(posedge clk) begin
if(EPP_strobe_edge1 & EPP_write & EPP_data_strobe) begin
if(addr_reg[3:0] == 4'd1) vel0 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd3) vel1 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd5) vel2 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd7) vel3 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd9) begin
real_dout <= { EPP_datain[5:0], lowbyte };
end
else if(addr_reg[3:0] == 4'd11) begin
tap <= lowbyte[7:6];
steptime <= lowbyte[T-1:0];
Spolarity <= EPP_datain[7];
// EPP_datain[6] is do_enable_wdt
dirtime <= EPP_datain[T-1:0];
end
else lowbyte <= EPP_datain;
end
end
reg [31:0] data_buf;
always @(posedge clk) begin
if(EPP_strobe_edge1 & EPP_read && addr_reg[1:0] == 2'd0) begin
if(addr_reg[4:2] == 3'd0) data_buf <= pos0;
else if(addr_reg[4:2] == 3'd1) data_buf <= pos1;
else if(addr_reg[4:2] == 3'd2) data_buf <= pos2;
else if(addr_reg[4:2] == 3'd3) data_buf <= pos3;
else if(addr_reg[4:2] == 3'd4)
data_buf <= din;
end
end
// the addr_reg test looks funny because it is auto-incremented in an always
// block so "1" reads the low byte, "2 and "3" read middle bytes, and "0"
// reads the high byte I have a feeling that I'm doing this in the wrong way.
wire [7:0] data_reg = addr_reg[1:0] == 2'd1 ? data_buf[7:0] :
(addr_reg[1:0] == 2'd2 ? data_buf[15:8] :
(addr_reg[1:0] == 2'd3 ? data_buf[23:16] :
data_buf[31:24]));
wire [7:0] EPP_data_mux = data_reg;
assign EPP_dataout = (EPP_read & EPP_wait) ? EPP_data_mux : 8'hZZ;
// assign do_enable_wdt = EPP_strobe_edge1 & EPP_write & EPP_data_strobe & (addr_reg[3:0] == 4'd9) & EPP_datain[6];
// assign led = do_tristate ? 1'BZ : (real_step[0] ^ real_dir[0]);
assign led = do_tristate ? 1'bZ : (real_step[0] ^ real_dir[0]);
assign nConfig = epp_nReset; // 1'b1;
assign do_enable_wdt = EPP_strobe_edge1 & EPP_write & EPP_data_strobe & (addr_reg[3:0] == 4'd9) & EPP_datain[6];
endmodule
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_rd_cmd_fsm.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_rd_cmd_fsm (
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
output wire s_arready ,
input wire s_arvalid ,
input wire [7:0] s_arlen ,
output wire m_arvalid ,
input wire m_arready ,
// signal to increment to the next mc transaction
output wire next ,
// signal to the fsm there is another transaction required
input wire next_pending ,
// Write Data portion has completed or Read FIFO has a slot available (not
// full)
input wire data_ready ,
// status signal for w_channel when command is written.
output wire a_push ,
output wire r_push
);
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
// States
localparam SM_IDLE = 2'b00;
localparam SM_CMD_EN = 2'b01;
localparam SM_CMD_ACCEPTED = 2'b10;
localparam SM_DONE = 2'b11;
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [1:0] state;
// synthesis attribute MAX_FANOUT of state is 20;
reg [1:0] state_r1;
reg [1:0] next_state;
reg [7:0] s_arlen_r;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
///////////////////////////////////////////////////////////////////////////////
// register for timing
always @(posedge clk) begin
if (reset) begin
state <= SM_IDLE;
state_r1 <= SM_IDLE;
s_arlen_r <= 0;
end else begin
state <= next_state;
state_r1 <= state;
s_arlen_r <= s_arlen;
end
end
// Next state transitions.
always @( * ) begin
next_state = state;
case (state)
SM_IDLE:
if (s_arvalid & data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_EN:
///////////////////////////////////////////////////////////////////
// Drive m_arvalid downstream in this state
///////////////////////////////////////////////////////////////////
//If there is no fifo space
if (~data_ready & m_arready & next_pending) begin
///////////////////////////////////////////////////////////////////
//There is more to do, wait until data space is available drop valid
next_state = SM_CMD_ACCEPTED;
end else if (m_arready & ~next_pending)begin
next_state = SM_DONE;
end else if (m_arready & next_pending) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_ACCEPTED:
if (data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_DONE:
next_state = SM_IDLE;
default:
next_state = SM_IDLE;
endcase
end
// Assign outputs based on current state.
assign m_arvalid = (state == SM_CMD_EN);
assign next = m_arready && (state == SM_CMD_EN);
assign r_push = next;
assign a_push = (state == SM_IDLE);
assign s_arready = ((state == SM_CMD_EN) || (state == SM_DONE)) && (next_state == SM_IDLE);
endmodule
`default_nettype wire
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_rd_cmd_fsm.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_rd_cmd_fsm (
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
output wire s_arready ,
input wire s_arvalid ,
input wire [7:0] s_arlen ,
output wire m_arvalid ,
input wire m_arready ,
// signal to increment to the next mc transaction
output wire next ,
// signal to the fsm there is another transaction required
input wire next_pending ,
// Write Data portion has completed or Read FIFO has a slot available (not
// full)
input wire data_ready ,
// status signal for w_channel when command is written.
output wire a_push ,
output wire r_push
);
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
// States
localparam SM_IDLE = 2'b00;
localparam SM_CMD_EN = 2'b01;
localparam SM_CMD_ACCEPTED = 2'b10;
localparam SM_DONE = 2'b11;
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [1:0] state;
// synthesis attribute MAX_FANOUT of state is 20;
reg [1:0] state_r1;
reg [1:0] next_state;
reg [7:0] s_arlen_r;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
///////////////////////////////////////////////////////////////////////////////
// register for timing
always @(posedge clk) begin
if (reset) begin
state <= SM_IDLE;
state_r1 <= SM_IDLE;
s_arlen_r <= 0;
end else begin
state <= next_state;
state_r1 <= state;
s_arlen_r <= s_arlen;
end
end
// Next state transitions.
always @( * ) begin
next_state = state;
case (state)
SM_IDLE:
if (s_arvalid & data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_EN:
///////////////////////////////////////////////////////////////////
// Drive m_arvalid downstream in this state
///////////////////////////////////////////////////////////////////
//If there is no fifo space
if (~data_ready & m_arready & next_pending) begin
///////////////////////////////////////////////////////////////////
//There is more to do, wait until data space is available drop valid
next_state = SM_CMD_ACCEPTED;
end else if (m_arready & ~next_pending)begin
next_state = SM_DONE;
end else if (m_arready & next_pending) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_ACCEPTED:
if (data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_DONE:
next_state = SM_IDLE;
default:
next_state = SM_IDLE;
endcase
end
// Assign outputs based on current state.
assign m_arvalid = (state == SM_CMD_EN);
assign next = m_arready && (state == SM_CMD_EN);
assign r_push = next;
assign a_push = (state == SM_IDLE);
assign s_arready = ((state == SM_CMD_EN) || (state == SM_DONE)) && (next_state == SM_IDLE);
endmodule
`default_nettype wire
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_rd_cmd_fsm.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_rd_cmd_fsm (
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
output wire s_arready ,
input wire s_arvalid ,
input wire [7:0] s_arlen ,
output wire m_arvalid ,
input wire m_arready ,
// signal to increment to the next mc transaction
output wire next ,
// signal to the fsm there is another transaction required
input wire next_pending ,
// Write Data portion has completed or Read FIFO has a slot available (not
// full)
input wire data_ready ,
// status signal for w_channel when command is written.
output wire a_push ,
output wire r_push
);
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
// States
localparam SM_IDLE = 2'b00;
localparam SM_CMD_EN = 2'b01;
localparam SM_CMD_ACCEPTED = 2'b10;
localparam SM_DONE = 2'b11;
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [1:0] state;
// synthesis attribute MAX_FANOUT of state is 20;
reg [1:0] state_r1;
reg [1:0] next_state;
reg [7:0] s_arlen_r;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
///////////////////////////////////////////////////////////////////////////////
// register for timing
always @(posedge clk) begin
if (reset) begin
state <= SM_IDLE;
state_r1 <= SM_IDLE;
s_arlen_r <= 0;
end else begin
state <= next_state;
state_r1 <= state;
s_arlen_r <= s_arlen;
end
end
// Next state transitions.
always @( * ) begin
next_state = state;
case (state)
SM_IDLE:
if (s_arvalid & data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_EN:
///////////////////////////////////////////////////////////////////
// Drive m_arvalid downstream in this state
///////////////////////////////////////////////////////////////////
//If there is no fifo space
if (~data_ready & m_arready & next_pending) begin
///////////////////////////////////////////////////////////////////
//There is more to do, wait until data space is available drop valid
next_state = SM_CMD_ACCEPTED;
end else if (m_arready & ~next_pending)begin
next_state = SM_DONE;
end else if (m_arready & next_pending) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_ACCEPTED:
if (data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_DONE:
next_state = SM_IDLE;
default:
next_state = SM_IDLE;
endcase
end
// Assign outputs based on current state.
assign m_arvalid = (state == SM_CMD_EN);
assign next = m_arready && (state == SM_CMD_EN);
assign r_push = next;
assign a_push = (state == SM_IDLE);
assign s_arready = ((state == SM_CMD_EN) || (state == SM_DONE)) && (next_state == SM_IDLE);
endmodule
`default_nettype wire
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_rd_cmd_fsm.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_rd_cmd_fsm (
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
output wire s_arready ,
input wire s_arvalid ,
input wire [7:0] s_arlen ,
output wire m_arvalid ,
input wire m_arready ,
// signal to increment to the next mc transaction
output wire next ,
// signal to the fsm there is another transaction required
input wire next_pending ,
// Write Data portion has completed or Read FIFO has a slot available (not
// full)
input wire data_ready ,
// status signal for w_channel when command is written.
output wire a_push ,
output wire r_push
);
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
// States
localparam SM_IDLE = 2'b00;
localparam SM_CMD_EN = 2'b01;
localparam SM_CMD_ACCEPTED = 2'b10;
localparam SM_DONE = 2'b11;
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [1:0] state;
// synthesis attribute MAX_FANOUT of state is 20;
reg [1:0] state_r1;
reg [1:0] next_state;
reg [7:0] s_arlen_r;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
///////////////////////////////////////////////////////////////////////////////
// register for timing
always @(posedge clk) begin
if (reset) begin
state <= SM_IDLE;
state_r1 <= SM_IDLE;
s_arlen_r <= 0;
end else begin
state <= next_state;
state_r1 <= state;
s_arlen_r <= s_arlen;
end
end
// Next state transitions.
always @( * ) begin
next_state = state;
case (state)
SM_IDLE:
if (s_arvalid & data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_EN:
///////////////////////////////////////////////////////////////////
// Drive m_arvalid downstream in this state
///////////////////////////////////////////////////////////////////
//If there is no fifo space
if (~data_ready & m_arready & next_pending) begin
///////////////////////////////////////////////////////////////////
//There is more to do, wait until data space is available drop valid
next_state = SM_CMD_ACCEPTED;
end else if (m_arready & ~next_pending)begin
next_state = SM_DONE;
end else if (m_arready & next_pending) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_ACCEPTED:
if (data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_DONE:
next_state = SM_IDLE;
default:
next_state = SM_IDLE;
endcase
end
// Assign outputs based on current state.
assign m_arvalid = (state == SM_CMD_EN);
assign next = m_arready && (state == SM_CMD_EN);
assign r_push = next;
assign a_push = (state == SM_IDLE);
assign s_arready = ((state == SM_CMD_EN) || (state == SM_DONE)) && (next_state == SM_IDLE);
endmodule
`default_nettype wire
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_rd_cmd_fsm.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_rd_cmd_fsm (
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
output wire s_arready ,
input wire s_arvalid ,
input wire [7:0] s_arlen ,
output wire m_arvalid ,
input wire m_arready ,
// signal to increment to the next mc transaction
output wire next ,
// signal to the fsm there is another transaction required
input wire next_pending ,
// Write Data portion has completed or Read FIFO has a slot available (not
// full)
input wire data_ready ,
// status signal for w_channel when command is written.
output wire a_push ,
output wire r_push
);
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
// States
localparam SM_IDLE = 2'b00;
localparam SM_CMD_EN = 2'b01;
localparam SM_CMD_ACCEPTED = 2'b10;
localparam SM_DONE = 2'b11;
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [1:0] state;
// synthesis attribute MAX_FANOUT of state is 20;
reg [1:0] state_r1;
reg [1:0] next_state;
reg [7:0] s_arlen_r;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
///////////////////////////////////////////////////////////////////////////////
// register for timing
always @(posedge clk) begin
if (reset) begin
state <= SM_IDLE;
state_r1 <= SM_IDLE;
s_arlen_r <= 0;
end else begin
state <= next_state;
state_r1 <= state;
s_arlen_r <= s_arlen;
end
end
// Next state transitions.
always @( * ) begin
next_state = state;
case (state)
SM_IDLE:
if (s_arvalid & data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_EN:
///////////////////////////////////////////////////////////////////
// Drive m_arvalid downstream in this state
///////////////////////////////////////////////////////////////////
//If there is no fifo space
if (~data_ready & m_arready & next_pending) begin
///////////////////////////////////////////////////////////////////
//There is more to do, wait until data space is available drop valid
next_state = SM_CMD_ACCEPTED;
end else if (m_arready & ~next_pending)begin
next_state = SM_DONE;
end else if (m_arready & next_pending) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_ACCEPTED:
if (data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_DONE:
next_state = SM_IDLE;
default:
next_state = SM_IDLE;
endcase
end
// Assign outputs based on current state.
assign m_arvalid = (state == SM_CMD_EN);
assign next = m_arready && (state == SM_CMD_EN);
assign r_push = next;
assign a_push = (state == SM_IDLE);
assign s_arready = ((state == SM_CMD_EN) || (state == SM_DONE)) && (next_state == SM_IDLE);
endmodule
`default_nettype wire
|
// -*- verilog -*-
//
// USRP - Universal Software Radio Peripheral
//
// Copyright (C) 2003 Matt Ettus
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
//
// DDC block
module ddc(input clock,
input reset,
input enable,
input [3:0] rate1,
input [3:0] rate2,
output strobe,
input [31:0] freq,
input [15:0] i_in,
input [15:0] q_in,
output [15:0] i_out,
output [15:0] q_out
);
parameter bw = 16;
parameter zw = 16;
wire [15:0] i_cordic_out, q_cordic_out;
wire [31:0] phase;
wire strobe1, strobe2;
reg [3:0] strobe_ctr1,strobe_ctr2;
always @(posedge clock)
if(reset | ~enable)
strobe_ctr2 <= #1 4'd0;
else if(strobe2)
strobe_ctr2 <= #1 4'd0;
else
strobe_ctr2 <= #1 strobe_ctr2 + 4'd1;
always @(posedge clock)
if(reset | ~enable)
strobe_ctr1 <= #1 4'd0;
else if(strobe1)
strobe_ctr1 <= #1 4'd0;
else if(strobe2)
strobe_ctr1 <= #1 strobe_ctr1 + 4'd1;
assign strobe2 = enable & ( strobe_ctr2 == rate2 );
assign strobe1 = strobe2 & ( strobe_ctr1 == rate1 );
assign strobe = strobe1;
function [2:0] log_ceil;
input [3:0] val;
log_ceil = val[3] ? 3'd4 : val[2] ? 3'd3 : val[1] ? 3'd2 : 3'd1;
endfunction
wire [2:0] shift1 = log_ceil(rate1);
wire [2:0] shift2 = log_ceil(rate2);
cordic #(.bitwidth(bw),.zwidth(zw),.stages(16))
cordic(.clock(clock), .reset(reset), .enable(enable),
.xi(i_in), .yi(q_in), .zi(phase[31:32-zw]),
.xo(i_cordic_out), .yo(q_cordic_out), .zo() );
cic_decim_2stage #(.bw(bw),.N(4))
decim_i(.clock(clock),.reset(reset),.enable(enable),
.strobe1(1'b1),.strobe2(strobe2),.strobe3(strobe1),.shift1(shift2),.shift2(shift1),
.signal_in(i_cordic_out),.signal_out(i_out));
cic_decim_2stage #(.bw(bw),.N(4))
decim_q(.clock(clock),.reset(reset),.enable(enable),
.strobe1(1'b1),.strobe2(strobe2),.strobe3(strobe1),.shift1(shift2),.shift2(shift1),
.signal_in(q_cordic_out),.signal_out(q_out));
phase_acc #(.resolution(32))
nco (.clk(clock),.reset(reset),.enable(enable),
.freq(freq),.phase(phase));
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: Address AXI3 Slave Converter
//
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// a_axi3_conv
// axic_fifo
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_a_axi3_conv #
(
parameter C_FAMILY = "none",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_USER_SIGNALS = 0,
parameter integer C_AXI_AUSER_WIDTH = 1,
parameter integer C_AXI_CHANNEL = 0,
// 0 = AXI AW Channel.
// 1 = AXI AR Channel.
parameter integer C_SUPPORT_SPLITTING = 1,
// Implement transaction splitting logic.
// Disabled whan all connected masters are AXI3 and have same or narrower data width.
parameter integer C_SUPPORT_BURSTS = 1,
// Disabled when all connected masters are AxiLite,
// allowing logic to be simplified.
parameter integer C_SINGLE_THREAD = 1
// 0 = Ignore ID when propagating transactions (assume all responses are in order).
// 1 = Enforce single-threading (one ID at a time) when any outstanding or
// requested transaction requires splitting.
// While no split is ongoing any new non-split transaction will pass immediately regardless
// off ID.
// A split transaction will stall if there are multiple ID (non-split) transactions
// ongoing, once it has been forwarded only transactions with the same ID is allowed
// (split or not) until all ongoing split transactios has been completed.
)
(
// System Signals
input wire ACLK,
input wire ARESET,
// Command Interface (W/R)
output wire cmd_valid,
output wire cmd_split,
output wire [C_AXI_ID_WIDTH-1:0] cmd_id,
output wire [4-1:0] cmd_length,
input wire cmd_ready,
// Command Interface (B)
output wire cmd_b_valid,
output wire cmd_b_split,
output wire [4-1:0] cmd_b_repeat,
input wire cmd_b_ready,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AADDR,
input wire [8-1:0] S_AXI_ALEN,
input wire [3-1:0] S_AXI_ASIZE,
input wire [2-1:0] S_AXI_ABURST,
input wire [1-1:0] S_AXI_ALOCK,
input wire [4-1:0] S_AXI_ACACHE,
input wire [3-1:0] S_AXI_APROT,
input wire [4-1:0] S_AXI_AQOS,
input wire [C_AXI_AUSER_WIDTH-1:0] S_AXI_AUSER,
input wire S_AXI_AVALID,
output wire S_AXI_AREADY,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_AID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AADDR,
output wire [4-1:0] M_AXI_ALEN,
output wire [3-1:0] M_AXI_ASIZE,
output wire [2-1:0] M_AXI_ABURST,
output wire [2-1:0] M_AXI_ALOCK,
output wire [4-1:0] M_AXI_ACACHE,
output wire [3-1:0] M_AXI_APROT,
output wire [4-1:0] M_AXI_AQOS,
output wire [C_AXI_AUSER_WIDTH-1:0] M_AXI_AUSER,
output wire M_AXI_AVALID,
input wire M_AXI_AREADY
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Constants for burst types.
localparam [2-1:0] C_FIX_BURST = 2'b00;
localparam [2-1:0] C_INCR_BURST = 2'b01;
localparam [2-1:0] C_WRAP_BURST = 2'b10;
// Depth for command FIFO.
localparam integer C_FIFO_DEPTH_LOG = 5;
// Constants used to generate size mask.
localparam [C_AXI_ADDR_WIDTH+8-1:0] C_SIZE_MASK = {{C_AXI_ADDR_WIDTH{1'b1}}, 8'b0000_0000};
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Access decoding related signals.
wire access_is_incr;
wire [4-1:0] num_transactions;
wire incr_need_to_split;
reg [C_AXI_ADDR_WIDTH-1:0] next_mi_addr;
reg split_ongoing;
reg [4-1:0] pushed_commands;
reg [16-1:0] addr_step;
reg [16-1:0] first_step;
wire [8-1:0] first_beats;
reg [C_AXI_ADDR_WIDTH-1:0] size_mask;
// Access decoding related signals for internal pipestage.
reg access_is_incr_q;
reg incr_need_to_split_q;
wire need_to_split_q;
reg [4-1:0] num_transactions_q;
reg [16-1:0] addr_step_q;
reg [16-1:0] first_step_q;
reg [C_AXI_ADDR_WIDTH-1:0] size_mask_q;
// Command buffer help signals.
reg [C_FIFO_DEPTH_LOG:0] cmd_depth;
reg cmd_empty;
reg [C_AXI_ID_WIDTH-1:0] queue_id;
wire id_match;
wire cmd_id_check;
wire s_ready;
wire cmd_full;
wire allow_this_cmd;
wire allow_new_cmd;
wire cmd_push;
reg cmd_push_block;
reg [C_FIFO_DEPTH_LOG:0] cmd_b_depth;
reg cmd_b_empty;
wire cmd_b_full;
wire cmd_b_push;
reg cmd_b_push_block;
wire pushed_new_cmd;
wire last_incr_split;
wire last_split;
wire first_split;
wire no_cmd;
wire allow_split_cmd;
wire almost_empty;
wire no_b_cmd;
wire allow_non_split_cmd;
wire almost_b_empty;
reg multiple_id_non_split;
reg split_in_progress;
// Internal Command Interface signals (W/R).
wire cmd_split_i;
wire [C_AXI_ID_WIDTH-1:0] cmd_id_i;
reg [4-1:0] cmd_length_i;
// Internal Command Interface signals (B).
wire cmd_b_split_i;
wire [4-1:0] cmd_b_repeat_i;
// Throttling help signals.
wire mi_stalling;
reg command_ongoing;
// Internal SI-side signals.
reg [C_AXI_ID_WIDTH-1:0] S_AXI_AID_Q;
reg [C_AXI_ADDR_WIDTH-1:0] S_AXI_AADDR_Q;
reg [8-1:0] S_AXI_ALEN_Q;
reg [3-1:0] S_AXI_ASIZE_Q;
reg [2-1:0] S_AXI_ABURST_Q;
reg [2-1:0] S_AXI_ALOCK_Q;
reg [4-1:0] S_AXI_ACACHE_Q;
reg [3-1:0] S_AXI_APROT_Q;
reg [4-1:0] S_AXI_AQOS_Q;
reg [C_AXI_AUSER_WIDTH-1:0] S_AXI_AUSER_Q;
reg S_AXI_AREADY_I;
// Internal MI-side signals.
wire [C_AXI_ID_WIDTH-1:0] M_AXI_AID_I;
reg [C_AXI_ADDR_WIDTH-1:0] M_AXI_AADDR_I;
reg [8-1:0] M_AXI_ALEN_I;
wire [3-1:0] M_AXI_ASIZE_I;
wire [2-1:0] M_AXI_ABURST_I;
reg [2-1:0] M_AXI_ALOCK_I;
wire [4-1:0] M_AXI_ACACHE_I;
wire [3-1:0] M_AXI_APROT_I;
wire [4-1:0] M_AXI_AQOS_I;
wire [C_AXI_AUSER_WIDTH-1:0] M_AXI_AUSER_I;
wire M_AXI_AVALID_I;
wire M_AXI_AREADY_I;
reg [1:0] areset_d; // Reset delay register
always @(posedge ACLK) begin
areset_d <= {areset_d[0], ARESET};
end
/////////////////////////////////////////////////////////////////////////////
// Capture SI-Side signals.
//
/////////////////////////////////////////////////////////////////////////////
// Register SI-Side signals.
always @ (posedge ACLK) begin
if ( ARESET ) begin
S_AXI_AID_Q <= {C_AXI_ID_WIDTH{1'b0}};
S_AXI_AADDR_Q <= {C_AXI_ADDR_WIDTH{1'b0}};
S_AXI_ALEN_Q <= 8'b0;
S_AXI_ASIZE_Q <= 3'b0;
S_AXI_ABURST_Q <= 2'b0;
S_AXI_ALOCK_Q <= 2'b0;
S_AXI_ACACHE_Q <= 4'b0;
S_AXI_APROT_Q <= 3'b0;
S_AXI_AQOS_Q <= 4'b0;
S_AXI_AUSER_Q <= {C_AXI_AUSER_WIDTH{1'b0}};
end else begin
if ( S_AXI_AREADY_I ) begin
S_AXI_AID_Q <= S_AXI_AID;
S_AXI_AADDR_Q <= S_AXI_AADDR;
S_AXI_ALEN_Q <= S_AXI_ALEN;
S_AXI_ASIZE_Q <= S_AXI_ASIZE;
S_AXI_ABURST_Q <= S_AXI_ABURST;
S_AXI_ALOCK_Q <= S_AXI_ALOCK;
S_AXI_ACACHE_Q <= S_AXI_ACACHE;
S_AXI_APROT_Q <= S_AXI_APROT;
S_AXI_AQOS_Q <= S_AXI_AQOS;
S_AXI_AUSER_Q <= S_AXI_AUSER;
end
end
end
/////////////////////////////////////////////////////////////////////////////
// Decode the Incoming Transaction.
//
// Extract transaction type and the number of splits that may be needed.
//
// Calculate the step size so that the address for each part of a split can
// can be calculated.
//
/////////////////////////////////////////////////////////////////////////////
// Transaction burst type.
assign access_is_incr = ( S_AXI_ABURST == C_INCR_BURST );
// Get number of transactions for split INCR.
assign num_transactions = S_AXI_ALEN[4 +: 4];
assign first_beats = {3'b0, S_AXI_ALEN[0 +: 4]} + 7'b01;
// Generate address increment of first split transaction.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: first_step = first_beats << 0;
3'b001: first_step = first_beats << 1;
3'b010: first_step = first_beats << 2;
3'b011: first_step = first_beats << 3;
3'b100: first_step = first_beats << 4;
3'b101: first_step = first_beats << 5;
3'b110: first_step = first_beats << 6;
3'b111: first_step = first_beats << 7;
endcase
end
// Generate address increment for remaining split transactions.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: addr_step = 16'h0010;
3'b001: addr_step = 16'h0020;
3'b010: addr_step = 16'h0040;
3'b011: addr_step = 16'h0080;
3'b100: addr_step = 16'h0100;
3'b101: addr_step = 16'h0200;
3'b110: addr_step = 16'h0400;
3'b111: addr_step = 16'h0800;
endcase
end
// Generate address mask bits to remove split transaction unalignment.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: size_mask = C_SIZE_MASK[8 +: C_AXI_ADDR_WIDTH];
3'b001: size_mask = C_SIZE_MASK[7 +: C_AXI_ADDR_WIDTH];
3'b010: size_mask = C_SIZE_MASK[6 +: C_AXI_ADDR_WIDTH];
3'b011: size_mask = C_SIZE_MASK[5 +: C_AXI_ADDR_WIDTH];
3'b100: size_mask = C_SIZE_MASK[4 +: C_AXI_ADDR_WIDTH];
3'b101: size_mask = C_SIZE_MASK[3 +: C_AXI_ADDR_WIDTH];
3'b110: size_mask = C_SIZE_MASK[2 +: C_AXI_ADDR_WIDTH];
3'b111: size_mask = C_SIZE_MASK[1 +: C_AXI_ADDR_WIDTH];
endcase
end
/////////////////////////////////////////////////////////////////////////////
// Transfer SI-Side signals to internal Pipeline Stage.
//
/////////////////////////////////////////////////////////////////////////////
always @ (posedge ACLK) begin
if ( ARESET ) begin
access_is_incr_q <= 1'b0;
incr_need_to_split_q <= 1'b0;
num_transactions_q <= 4'b0;
addr_step_q <= 16'b0;
first_step_q <= 16'b0;
size_mask_q <= {C_AXI_ADDR_WIDTH{1'b0}};
end else begin
if ( S_AXI_AREADY_I ) begin
access_is_incr_q <= access_is_incr;
incr_need_to_split_q <= incr_need_to_split;
num_transactions_q <= num_transactions;
addr_step_q <= addr_step;
first_step_q <= first_step;
size_mask_q <= size_mask;
end
end
end
/////////////////////////////////////////////////////////////////////////////
// Generate Command Information.
//
// Detect if current transation needs to be split, and keep track of all
// the generated split transactions.
//
//
/////////////////////////////////////////////////////////////////////////////
// Detect when INCR must be split.
assign incr_need_to_split = access_is_incr & ( num_transactions != 0 ) &
( C_SUPPORT_SPLITTING == 1 ) &
( C_SUPPORT_BURSTS == 1 );
// Detect when a command has to be split.
assign need_to_split_q = incr_need_to_split_q;
// Handle progress of split transactions.
always @ (posedge ACLK) begin
if ( ARESET ) begin
split_ongoing <= 1'b0;
end else begin
if ( pushed_new_cmd ) begin
split_ongoing <= need_to_split_q & ~last_split;
end
end
end
// Keep track of number of transactions generated.
always @ (posedge ACLK) begin
if ( ARESET ) begin
pushed_commands <= 4'b0;
end else begin
if ( S_AXI_AREADY_I ) begin
pushed_commands <= 4'b0;
end else if ( pushed_new_cmd ) begin
pushed_commands <= pushed_commands + 4'b1;
end
end
end
// Detect last part of a command, split or not.
assign last_incr_split = access_is_incr_q & ( num_transactions_q == pushed_commands );
assign last_split = last_incr_split | ~access_is_incr_q |
( C_SUPPORT_SPLITTING == 0 ) |
( C_SUPPORT_BURSTS == 0 );
assign first_split = (pushed_commands == 4'b0);
// Calculate base for next address.
always @ (posedge ACLK) begin
if ( ARESET ) begin
next_mi_addr = {C_AXI_ADDR_WIDTH{1'b0}};
end else if ( pushed_new_cmd ) begin
next_mi_addr = M_AXI_AADDR_I + (first_split ? first_step_q : addr_step_q);
end
end
/////////////////////////////////////////////////////////////////////////////
// Translating Transaction.
//
// Set Split transaction information on all part except last for a transaction
// that needs splitting.
// The B Channel will only get one command for a Split transaction and in
// the Split bflag will be set in that case.
//
// The AWID is extracted and applied to all commands generated for the current
// incomming SI-Side transaction.
//
// The address is increased for each part of a Split transaction, the amount
// depends on the siSIZE for the transaction.
//
// The length has to be changed for Split transactions. All part except tha
// last one will have 0xF, the last one uses the 4 lsb bits from the SI-side
// transaction as length.
//
// Non-Split has untouched address and length information.
//
// Exclusive access are diasabled for a Split transaction because it is not
// possible to guarantee concistency between all the parts.
//
/////////////////////////////////////////////////////////////////////////////
// Assign Split signals.
assign cmd_split_i = need_to_split_q & ~last_split;
assign cmd_b_split_i = need_to_split_q & ~last_split;
// Copy AW ID to W.
assign cmd_id_i = S_AXI_AID_Q;
// Set B Responses to merge.
assign cmd_b_repeat_i = num_transactions_q;
// Select new size or remaining size.
always @ *
begin
if ( split_ongoing & access_is_incr_q ) begin
M_AXI_AADDR_I = next_mi_addr & size_mask_q;
end else begin
M_AXI_AADDR_I = S_AXI_AADDR_Q;
end
end
// Generate the base length for each transaction.
always @ *
begin
if ( first_split | ~need_to_split_q ) begin
M_AXI_ALEN_I = S_AXI_ALEN_Q[0 +: 4];
cmd_length_i = S_AXI_ALEN_Q[0 +: 4];
end else begin
M_AXI_ALEN_I = 4'hF;
cmd_length_i = 4'hF;
end
end
// Kill Exclusive for Split transactions.
always @ *
begin
if ( need_to_split_q ) begin
M_AXI_ALOCK_I = 2'b00;
end else begin
M_AXI_ALOCK_I = {1'b0, S_AXI_ALOCK_Q};
end
end
/////////////////////////////////////////////////////////////////////////////
// Forward the command to the MI-side interface.
//
// It is determined that this is an allowed command/access when there is
// room in the command queue (and it passes ID and Split checks as required).
//
/////////////////////////////////////////////////////////////////////////////
// Move SI-side transaction to internal pipe stage.
always @ (posedge ACLK) begin
if (ARESET) begin
command_ongoing <= 1'b0;
S_AXI_AREADY_I <= 1'b0;
end else begin
if (areset_d == 2'b10) begin
S_AXI_AREADY_I <= 1'b1;
end else begin
if ( S_AXI_AVALID & S_AXI_AREADY_I ) begin
command_ongoing <= 1'b1;
S_AXI_AREADY_I <= 1'b0;
end else if ( pushed_new_cmd & last_split ) begin
command_ongoing <= 1'b0;
S_AXI_AREADY_I <= 1'b1;
end
end
end
end
// Generate ready signal.
assign S_AXI_AREADY = S_AXI_AREADY_I;
// Only allowed to forward translated command when command queue is ok with it.
assign M_AXI_AVALID_I = allow_new_cmd & command_ongoing;
// Detect when MI-side is stalling.
assign mi_stalling = M_AXI_AVALID_I & ~M_AXI_AREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Simple transfer of paramters that doesn't need to be adjusted.
//
// ID - Transaction still recognized with the same ID.
// CACHE - No need to change the chache features. Even if the modyfiable
// bit is overridden (forcefully) there is no need to let downstream
// component beleive it is ok to modify it further.
// PROT - Security level of access is not changed when upsizing.
// QOS - Quality of Service is static 0.
// USER - User bits remains the same.
//
/////////////////////////////////////////////////////////////////////////////
assign M_AXI_AID_I = S_AXI_AID_Q;
assign M_AXI_ASIZE_I = S_AXI_ASIZE_Q;
assign M_AXI_ABURST_I = S_AXI_ABURST_Q;
assign M_AXI_ACACHE_I = S_AXI_ACACHE_Q;
assign M_AXI_APROT_I = S_AXI_APROT_Q;
assign M_AXI_AQOS_I = S_AXI_AQOS_Q;
assign M_AXI_AUSER_I = ( C_AXI_SUPPORTS_USER_SIGNALS ) ? S_AXI_AUSER_Q : {C_AXI_AUSER_WIDTH{1'b0}};
/////////////////////////////////////////////////////////////////////////////
// Control command queue to W/R channel.
//
// Commands can be pushed into the Cmd FIFO even if MI-side is stalling.
// A flag is set if MI-side is stalling when Command is pushed to the
// Cmd FIFO. This will prevent multiple push of the same Command as well as
// keeping the MI-side Valid signal if the Allow Cmd requirement has been
// updated to disable furter Commands (I.e. it is made sure that the SI-side
// Command has been forwarded to both Cmd FIFO and MI-side).
//
// It is allowed to continue pushing new commands as long as
// * There is room in the queue(s)
// * The ID is the same as previously queued. Since data is not reordered
// for the same ID it is always OK to let them proceed.
// Or, if no split transaction is ongoing any ID can be allowed.
//
/////////////////////////////////////////////////////////////////////////////
// Keep track of current ID in queue.
always @ (posedge ACLK) begin
if (ARESET) begin
queue_id <= {C_AXI_ID_WIDTH{1'b0}};
multiple_id_non_split <= 1'b0;
split_in_progress <= 1'b0;
end else begin
if ( cmd_push ) begin
// Store ID (it will be matching ID or a "new beginning").
queue_id <= S_AXI_AID_Q;
end
if ( no_cmd & no_b_cmd ) begin
multiple_id_non_split <= 1'b0;
end else if ( cmd_push & allow_non_split_cmd & ~id_match ) begin
multiple_id_non_split <= 1'b1;
end
if ( no_cmd & no_b_cmd ) begin
split_in_progress <= 1'b0;
end else if ( cmd_push & allow_split_cmd ) begin
split_in_progress <= 1'b1;
end
end
end
// Determine if the command FIFOs are empty.
assign no_cmd = almost_empty & cmd_ready | cmd_empty;
assign no_b_cmd = almost_b_empty & cmd_b_ready | cmd_b_empty;
// Check ID to make sure this command is allowed.
assign id_match = ( C_SINGLE_THREAD == 0 ) | ( queue_id == S_AXI_AID_Q);
assign cmd_id_check = (cmd_empty & cmd_b_empty) | ( id_match & (~cmd_empty | ~cmd_b_empty) );
// Command type affects possibility to push immediately or wait.
assign allow_split_cmd = need_to_split_q & cmd_id_check & ~multiple_id_non_split;
assign allow_non_split_cmd = ~need_to_split_q & (cmd_id_check | ~split_in_progress);
assign allow_this_cmd = allow_split_cmd | allow_non_split_cmd | ( C_SINGLE_THREAD == 0 );
// Check if it is allowed to push more commands.
assign allow_new_cmd = (~cmd_full & ~cmd_b_full & allow_this_cmd) |
cmd_push_block;
// Push new command when allowed and MI-side is able to receive the command.
assign cmd_push = M_AXI_AVALID_I & ~cmd_push_block;
assign cmd_b_push = M_AXI_AVALID_I & ~cmd_b_push_block & (C_AXI_CHANNEL == 0);
// Block furter push until command has been forwarded to MI-side.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_push_block <= 1'b0;
end else begin
if ( pushed_new_cmd ) begin
cmd_push_block <= 1'b0;
end else if ( cmd_push & mi_stalling ) begin
cmd_push_block <= 1'b1;
end
end
end
// Block furter push until command has been forwarded to MI-side.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_push_block <= 1'b0;
end else begin
if ( S_AXI_AREADY_I ) begin
cmd_b_push_block <= 1'b0;
end else if ( cmd_b_push ) begin
cmd_b_push_block <= 1'b1;
end
end
end
// Acknowledge command when we can push it into queue (and forward it).
assign pushed_new_cmd = M_AXI_AVALID_I & M_AXI_AREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Command Queue (W/R):
//
// Instantiate a FIFO as the queue and adjust the control signals.
//
// The features from Command FIFO can be reduced depending on configuration:
// Read Channel only need the split information.
// Write Channel always require ID information. When bursts are supported
// Split and Length information is also used.
//
/////////////////////////////////////////////////////////////////////////////
// Instantiated queue.
generate
if ( C_AXI_CHANNEL == 1 && C_SUPPORT_SPLITTING == 1 && C_SUPPORT_BURSTS == 1 ) begin : USE_R_CHANNEL
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(1),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_split_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_split}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_id = {C_AXI_ID_WIDTH{1'b0}};
assign cmd_length = 4'b0;
end else if (C_SUPPORT_BURSTS == 1) begin : USE_BURSTS
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(C_AXI_ID_WIDTH+4),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_id_i, cmd_length_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_id, cmd_length}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_split = 1'b0;
end else begin : NO_BURSTS
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(C_AXI_ID_WIDTH),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_id_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_id}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_split = 1'b0;
assign cmd_length = 4'b0;
end
endgenerate
// Queue is concidered full when not ready.
assign cmd_full = ~s_ready;
// Queue is empty when no data at output port.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_empty <= 1'b1;
cmd_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
if ( cmd_push & ~cmd_ready ) begin
// Push only => Increase depth.
cmd_depth <= cmd_depth + 1'b1;
cmd_empty <= 1'b0;
end else if ( ~cmd_push & cmd_ready ) begin
// Pop only => Decrease depth.
cmd_depth <= cmd_depth - 1'b1;
cmd_empty <= almost_empty;
end
end
end
assign almost_empty = ( cmd_depth == 1 );
/////////////////////////////////////////////////////////////////////////////
// Command Queue (B):
//
// Add command queue for B channel only when it is AW channel and both burst
// and splitting is supported.
//
// When turned off the command appears always empty.
//
/////////////////////////////////////////////////////////////////////////////
// Instantiated queue.
generate
if ( C_AXI_CHANNEL == 0 && C_SUPPORT_SPLITTING == 1 && C_SUPPORT_BURSTS == 1 ) begin : USE_B_CHANNEL
wire cmd_b_valid_i;
wire s_b_ready;
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(1+4),
.C_FIFO_TYPE("lut")
)
cmd_b_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_b_split_i, cmd_b_repeat_i}),
.S_VALID(cmd_b_push),
.S_READY(s_b_ready),
.M_MESG({cmd_b_split, cmd_b_repeat}),
.M_VALID(cmd_b_valid_i),
.M_READY(cmd_b_ready)
);
// Queue is concidered full when not ready.
assign cmd_b_full = ~s_b_ready;
// Queue is empty when no data at output port.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
if ( cmd_b_push & ~cmd_b_ready ) begin
// Push only => Increase depth.
cmd_b_depth <= cmd_b_depth + 1'b1;
cmd_b_empty <= 1'b0;
end else if ( ~cmd_b_push & cmd_b_ready ) begin
// Pop only => Decrease depth.
cmd_b_depth <= cmd_b_depth - 1'b1;
cmd_b_empty <= ( cmd_b_depth == 1 );
end
end
end
assign almost_b_empty = ( cmd_b_depth == 1 );
// Assign external signal.
assign cmd_b_valid = cmd_b_valid_i;
end else begin : NO_B_CHANNEL
// Assign external command signals.
assign cmd_b_valid = 1'b0;
assign cmd_b_split = 1'b0;
assign cmd_b_repeat = 4'b0;
// Assign internal command FIFO signals.
assign cmd_b_full = 1'b0;
assign almost_b_empty = 1'b0;
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
// Constant FF due to ModelSim behavior.
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end
end
end
endgenerate
/////////////////////////////////////////////////////////////////////////////
// MI-side output handling
//
/////////////////////////////////////////////////////////////////////////////
assign M_AXI_AID = M_AXI_AID_I;
assign M_AXI_AADDR = M_AXI_AADDR_I;
assign M_AXI_ALEN = M_AXI_ALEN_I;
assign M_AXI_ASIZE = M_AXI_ASIZE_I;
assign M_AXI_ABURST = M_AXI_ABURST_I;
assign M_AXI_ALOCK = M_AXI_ALOCK_I;
assign M_AXI_ACACHE = M_AXI_ACACHE_I;
assign M_AXI_APROT = M_AXI_APROT_I;
assign M_AXI_AQOS = M_AXI_AQOS_I;
assign M_AXI_AUSER = M_AXI_AUSER_I;
assign M_AXI_AVALID = M_AXI_AVALID_I;
assign M_AXI_AREADY_I = M_AXI_AREADY;
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: Address AXI3 Slave Converter
//
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// a_axi3_conv
// axic_fifo
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_a_axi3_conv #
(
parameter C_FAMILY = "none",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_USER_SIGNALS = 0,
parameter integer C_AXI_AUSER_WIDTH = 1,
parameter integer C_AXI_CHANNEL = 0,
// 0 = AXI AW Channel.
// 1 = AXI AR Channel.
parameter integer C_SUPPORT_SPLITTING = 1,
// Implement transaction splitting logic.
// Disabled whan all connected masters are AXI3 and have same or narrower data width.
parameter integer C_SUPPORT_BURSTS = 1,
// Disabled when all connected masters are AxiLite,
// allowing logic to be simplified.
parameter integer C_SINGLE_THREAD = 1
// 0 = Ignore ID when propagating transactions (assume all responses are in order).
// 1 = Enforce single-threading (one ID at a time) when any outstanding or
// requested transaction requires splitting.
// While no split is ongoing any new non-split transaction will pass immediately regardless
// off ID.
// A split transaction will stall if there are multiple ID (non-split) transactions
// ongoing, once it has been forwarded only transactions with the same ID is allowed
// (split or not) until all ongoing split transactios has been completed.
)
(
// System Signals
input wire ACLK,
input wire ARESET,
// Command Interface (W/R)
output wire cmd_valid,
output wire cmd_split,
output wire [C_AXI_ID_WIDTH-1:0] cmd_id,
output wire [4-1:0] cmd_length,
input wire cmd_ready,
// Command Interface (B)
output wire cmd_b_valid,
output wire cmd_b_split,
output wire [4-1:0] cmd_b_repeat,
input wire cmd_b_ready,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AADDR,
input wire [8-1:0] S_AXI_ALEN,
input wire [3-1:0] S_AXI_ASIZE,
input wire [2-1:0] S_AXI_ABURST,
input wire [1-1:0] S_AXI_ALOCK,
input wire [4-1:0] S_AXI_ACACHE,
input wire [3-1:0] S_AXI_APROT,
input wire [4-1:0] S_AXI_AQOS,
input wire [C_AXI_AUSER_WIDTH-1:0] S_AXI_AUSER,
input wire S_AXI_AVALID,
output wire S_AXI_AREADY,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_AID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AADDR,
output wire [4-1:0] M_AXI_ALEN,
output wire [3-1:0] M_AXI_ASIZE,
output wire [2-1:0] M_AXI_ABURST,
output wire [2-1:0] M_AXI_ALOCK,
output wire [4-1:0] M_AXI_ACACHE,
output wire [3-1:0] M_AXI_APROT,
output wire [4-1:0] M_AXI_AQOS,
output wire [C_AXI_AUSER_WIDTH-1:0] M_AXI_AUSER,
output wire M_AXI_AVALID,
input wire M_AXI_AREADY
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Constants for burst types.
localparam [2-1:0] C_FIX_BURST = 2'b00;
localparam [2-1:0] C_INCR_BURST = 2'b01;
localparam [2-1:0] C_WRAP_BURST = 2'b10;
// Depth for command FIFO.
localparam integer C_FIFO_DEPTH_LOG = 5;
// Constants used to generate size mask.
localparam [C_AXI_ADDR_WIDTH+8-1:0] C_SIZE_MASK = {{C_AXI_ADDR_WIDTH{1'b1}}, 8'b0000_0000};
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Access decoding related signals.
wire access_is_incr;
wire [4-1:0] num_transactions;
wire incr_need_to_split;
reg [C_AXI_ADDR_WIDTH-1:0] next_mi_addr;
reg split_ongoing;
reg [4-1:0] pushed_commands;
reg [16-1:0] addr_step;
reg [16-1:0] first_step;
wire [8-1:0] first_beats;
reg [C_AXI_ADDR_WIDTH-1:0] size_mask;
// Access decoding related signals for internal pipestage.
reg access_is_incr_q;
reg incr_need_to_split_q;
wire need_to_split_q;
reg [4-1:0] num_transactions_q;
reg [16-1:0] addr_step_q;
reg [16-1:0] first_step_q;
reg [C_AXI_ADDR_WIDTH-1:0] size_mask_q;
// Command buffer help signals.
reg [C_FIFO_DEPTH_LOG:0] cmd_depth;
reg cmd_empty;
reg [C_AXI_ID_WIDTH-1:0] queue_id;
wire id_match;
wire cmd_id_check;
wire s_ready;
wire cmd_full;
wire allow_this_cmd;
wire allow_new_cmd;
wire cmd_push;
reg cmd_push_block;
reg [C_FIFO_DEPTH_LOG:0] cmd_b_depth;
reg cmd_b_empty;
wire cmd_b_full;
wire cmd_b_push;
reg cmd_b_push_block;
wire pushed_new_cmd;
wire last_incr_split;
wire last_split;
wire first_split;
wire no_cmd;
wire allow_split_cmd;
wire almost_empty;
wire no_b_cmd;
wire allow_non_split_cmd;
wire almost_b_empty;
reg multiple_id_non_split;
reg split_in_progress;
// Internal Command Interface signals (W/R).
wire cmd_split_i;
wire [C_AXI_ID_WIDTH-1:0] cmd_id_i;
reg [4-1:0] cmd_length_i;
// Internal Command Interface signals (B).
wire cmd_b_split_i;
wire [4-1:0] cmd_b_repeat_i;
// Throttling help signals.
wire mi_stalling;
reg command_ongoing;
// Internal SI-side signals.
reg [C_AXI_ID_WIDTH-1:0] S_AXI_AID_Q;
reg [C_AXI_ADDR_WIDTH-1:0] S_AXI_AADDR_Q;
reg [8-1:0] S_AXI_ALEN_Q;
reg [3-1:0] S_AXI_ASIZE_Q;
reg [2-1:0] S_AXI_ABURST_Q;
reg [2-1:0] S_AXI_ALOCK_Q;
reg [4-1:0] S_AXI_ACACHE_Q;
reg [3-1:0] S_AXI_APROT_Q;
reg [4-1:0] S_AXI_AQOS_Q;
reg [C_AXI_AUSER_WIDTH-1:0] S_AXI_AUSER_Q;
reg S_AXI_AREADY_I;
// Internal MI-side signals.
wire [C_AXI_ID_WIDTH-1:0] M_AXI_AID_I;
reg [C_AXI_ADDR_WIDTH-1:0] M_AXI_AADDR_I;
reg [8-1:0] M_AXI_ALEN_I;
wire [3-1:0] M_AXI_ASIZE_I;
wire [2-1:0] M_AXI_ABURST_I;
reg [2-1:0] M_AXI_ALOCK_I;
wire [4-1:0] M_AXI_ACACHE_I;
wire [3-1:0] M_AXI_APROT_I;
wire [4-1:0] M_AXI_AQOS_I;
wire [C_AXI_AUSER_WIDTH-1:0] M_AXI_AUSER_I;
wire M_AXI_AVALID_I;
wire M_AXI_AREADY_I;
reg [1:0] areset_d; // Reset delay register
always @(posedge ACLK) begin
areset_d <= {areset_d[0], ARESET};
end
/////////////////////////////////////////////////////////////////////////////
// Capture SI-Side signals.
//
/////////////////////////////////////////////////////////////////////////////
// Register SI-Side signals.
always @ (posedge ACLK) begin
if ( ARESET ) begin
S_AXI_AID_Q <= {C_AXI_ID_WIDTH{1'b0}};
S_AXI_AADDR_Q <= {C_AXI_ADDR_WIDTH{1'b0}};
S_AXI_ALEN_Q <= 8'b0;
S_AXI_ASIZE_Q <= 3'b0;
S_AXI_ABURST_Q <= 2'b0;
S_AXI_ALOCK_Q <= 2'b0;
S_AXI_ACACHE_Q <= 4'b0;
S_AXI_APROT_Q <= 3'b0;
S_AXI_AQOS_Q <= 4'b0;
S_AXI_AUSER_Q <= {C_AXI_AUSER_WIDTH{1'b0}};
end else begin
if ( S_AXI_AREADY_I ) begin
S_AXI_AID_Q <= S_AXI_AID;
S_AXI_AADDR_Q <= S_AXI_AADDR;
S_AXI_ALEN_Q <= S_AXI_ALEN;
S_AXI_ASIZE_Q <= S_AXI_ASIZE;
S_AXI_ABURST_Q <= S_AXI_ABURST;
S_AXI_ALOCK_Q <= S_AXI_ALOCK;
S_AXI_ACACHE_Q <= S_AXI_ACACHE;
S_AXI_APROT_Q <= S_AXI_APROT;
S_AXI_AQOS_Q <= S_AXI_AQOS;
S_AXI_AUSER_Q <= S_AXI_AUSER;
end
end
end
/////////////////////////////////////////////////////////////////////////////
// Decode the Incoming Transaction.
//
// Extract transaction type and the number of splits that may be needed.
//
// Calculate the step size so that the address for each part of a split can
// can be calculated.
//
/////////////////////////////////////////////////////////////////////////////
// Transaction burst type.
assign access_is_incr = ( S_AXI_ABURST == C_INCR_BURST );
// Get number of transactions for split INCR.
assign num_transactions = S_AXI_ALEN[4 +: 4];
assign first_beats = {3'b0, S_AXI_ALEN[0 +: 4]} + 7'b01;
// Generate address increment of first split transaction.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: first_step = first_beats << 0;
3'b001: first_step = first_beats << 1;
3'b010: first_step = first_beats << 2;
3'b011: first_step = first_beats << 3;
3'b100: first_step = first_beats << 4;
3'b101: first_step = first_beats << 5;
3'b110: first_step = first_beats << 6;
3'b111: first_step = first_beats << 7;
endcase
end
// Generate address increment for remaining split transactions.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: addr_step = 16'h0010;
3'b001: addr_step = 16'h0020;
3'b010: addr_step = 16'h0040;
3'b011: addr_step = 16'h0080;
3'b100: addr_step = 16'h0100;
3'b101: addr_step = 16'h0200;
3'b110: addr_step = 16'h0400;
3'b111: addr_step = 16'h0800;
endcase
end
// Generate address mask bits to remove split transaction unalignment.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: size_mask = C_SIZE_MASK[8 +: C_AXI_ADDR_WIDTH];
3'b001: size_mask = C_SIZE_MASK[7 +: C_AXI_ADDR_WIDTH];
3'b010: size_mask = C_SIZE_MASK[6 +: C_AXI_ADDR_WIDTH];
3'b011: size_mask = C_SIZE_MASK[5 +: C_AXI_ADDR_WIDTH];
3'b100: size_mask = C_SIZE_MASK[4 +: C_AXI_ADDR_WIDTH];
3'b101: size_mask = C_SIZE_MASK[3 +: C_AXI_ADDR_WIDTH];
3'b110: size_mask = C_SIZE_MASK[2 +: C_AXI_ADDR_WIDTH];
3'b111: size_mask = C_SIZE_MASK[1 +: C_AXI_ADDR_WIDTH];
endcase
end
/////////////////////////////////////////////////////////////////////////////
// Transfer SI-Side signals to internal Pipeline Stage.
//
/////////////////////////////////////////////////////////////////////////////
always @ (posedge ACLK) begin
if ( ARESET ) begin
access_is_incr_q <= 1'b0;
incr_need_to_split_q <= 1'b0;
num_transactions_q <= 4'b0;
addr_step_q <= 16'b0;
first_step_q <= 16'b0;
size_mask_q <= {C_AXI_ADDR_WIDTH{1'b0}};
end else begin
if ( S_AXI_AREADY_I ) begin
access_is_incr_q <= access_is_incr;
incr_need_to_split_q <= incr_need_to_split;
num_transactions_q <= num_transactions;
addr_step_q <= addr_step;
first_step_q <= first_step;
size_mask_q <= size_mask;
end
end
end
/////////////////////////////////////////////////////////////////////////////
// Generate Command Information.
//
// Detect if current transation needs to be split, and keep track of all
// the generated split transactions.
//
//
/////////////////////////////////////////////////////////////////////////////
// Detect when INCR must be split.
assign incr_need_to_split = access_is_incr & ( num_transactions != 0 ) &
( C_SUPPORT_SPLITTING == 1 ) &
( C_SUPPORT_BURSTS == 1 );
// Detect when a command has to be split.
assign need_to_split_q = incr_need_to_split_q;
// Handle progress of split transactions.
always @ (posedge ACLK) begin
if ( ARESET ) begin
split_ongoing <= 1'b0;
end else begin
if ( pushed_new_cmd ) begin
split_ongoing <= need_to_split_q & ~last_split;
end
end
end
// Keep track of number of transactions generated.
always @ (posedge ACLK) begin
if ( ARESET ) begin
pushed_commands <= 4'b0;
end else begin
if ( S_AXI_AREADY_I ) begin
pushed_commands <= 4'b0;
end else if ( pushed_new_cmd ) begin
pushed_commands <= pushed_commands + 4'b1;
end
end
end
// Detect last part of a command, split or not.
assign last_incr_split = access_is_incr_q & ( num_transactions_q == pushed_commands );
assign last_split = last_incr_split | ~access_is_incr_q |
( C_SUPPORT_SPLITTING == 0 ) |
( C_SUPPORT_BURSTS == 0 );
assign first_split = (pushed_commands == 4'b0);
// Calculate base for next address.
always @ (posedge ACLK) begin
if ( ARESET ) begin
next_mi_addr = {C_AXI_ADDR_WIDTH{1'b0}};
end else if ( pushed_new_cmd ) begin
next_mi_addr = M_AXI_AADDR_I + (first_split ? first_step_q : addr_step_q);
end
end
/////////////////////////////////////////////////////////////////////////////
// Translating Transaction.
//
// Set Split transaction information on all part except last for a transaction
// that needs splitting.
// The B Channel will only get one command for a Split transaction and in
// the Split bflag will be set in that case.
//
// The AWID is extracted and applied to all commands generated for the current
// incomming SI-Side transaction.
//
// The address is increased for each part of a Split transaction, the amount
// depends on the siSIZE for the transaction.
//
// The length has to be changed for Split transactions. All part except tha
// last one will have 0xF, the last one uses the 4 lsb bits from the SI-side
// transaction as length.
//
// Non-Split has untouched address and length information.
//
// Exclusive access are diasabled for a Split transaction because it is not
// possible to guarantee concistency between all the parts.
//
/////////////////////////////////////////////////////////////////////////////
// Assign Split signals.
assign cmd_split_i = need_to_split_q & ~last_split;
assign cmd_b_split_i = need_to_split_q & ~last_split;
// Copy AW ID to W.
assign cmd_id_i = S_AXI_AID_Q;
// Set B Responses to merge.
assign cmd_b_repeat_i = num_transactions_q;
// Select new size or remaining size.
always @ *
begin
if ( split_ongoing & access_is_incr_q ) begin
M_AXI_AADDR_I = next_mi_addr & size_mask_q;
end else begin
M_AXI_AADDR_I = S_AXI_AADDR_Q;
end
end
// Generate the base length for each transaction.
always @ *
begin
if ( first_split | ~need_to_split_q ) begin
M_AXI_ALEN_I = S_AXI_ALEN_Q[0 +: 4];
cmd_length_i = S_AXI_ALEN_Q[0 +: 4];
end else begin
M_AXI_ALEN_I = 4'hF;
cmd_length_i = 4'hF;
end
end
// Kill Exclusive for Split transactions.
always @ *
begin
if ( need_to_split_q ) begin
M_AXI_ALOCK_I = 2'b00;
end else begin
M_AXI_ALOCK_I = {1'b0, S_AXI_ALOCK_Q};
end
end
/////////////////////////////////////////////////////////////////////////////
// Forward the command to the MI-side interface.
//
// It is determined that this is an allowed command/access when there is
// room in the command queue (and it passes ID and Split checks as required).
//
/////////////////////////////////////////////////////////////////////////////
// Move SI-side transaction to internal pipe stage.
always @ (posedge ACLK) begin
if (ARESET) begin
command_ongoing <= 1'b0;
S_AXI_AREADY_I <= 1'b0;
end else begin
if (areset_d == 2'b10) begin
S_AXI_AREADY_I <= 1'b1;
end else begin
if ( S_AXI_AVALID & S_AXI_AREADY_I ) begin
command_ongoing <= 1'b1;
S_AXI_AREADY_I <= 1'b0;
end else if ( pushed_new_cmd & last_split ) begin
command_ongoing <= 1'b0;
S_AXI_AREADY_I <= 1'b1;
end
end
end
end
// Generate ready signal.
assign S_AXI_AREADY = S_AXI_AREADY_I;
// Only allowed to forward translated command when command queue is ok with it.
assign M_AXI_AVALID_I = allow_new_cmd & command_ongoing;
// Detect when MI-side is stalling.
assign mi_stalling = M_AXI_AVALID_I & ~M_AXI_AREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Simple transfer of paramters that doesn't need to be adjusted.
//
// ID - Transaction still recognized with the same ID.
// CACHE - No need to change the chache features. Even if the modyfiable
// bit is overridden (forcefully) there is no need to let downstream
// component beleive it is ok to modify it further.
// PROT - Security level of access is not changed when upsizing.
// QOS - Quality of Service is static 0.
// USER - User bits remains the same.
//
/////////////////////////////////////////////////////////////////////////////
assign M_AXI_AID_I = S_AXI_AID_Q;
assign M_AXI_ASIZE_I = S_AXI_ASIZE_Q;
assign M_AXI_ABURST_I = S_AXI_ABURST_Q;
assign M_AXI_ACACHE_I = S_AXI_ACACHE_Q;
assign M_AXI_APROT_I = S_AXI_APROT_Q;
assign M_AXI_AQOS_I = S_AXI_AQOS_Q;
assign M_AXI_AUSER_I = ( C_AXI_SUPPORTS_USER_SIGNALS ) ? S_AXI_AUSER_Q : {C_AXI_AUSER_WIDTH{1'b0}};
/////////////////////////////////////////////////////////////////////////////
// Control command queue to W/R channel.
//
// Commands can be pushed into the Cmd FIFO even if MI-side is stalling.
// A flag is set if MI-side is stalling when Command is pushed to the
// Cmd FIFO. This will prevent multiple push of the same Command as well as
// keeping the MI-side Valid signal if the Allow Cmd requirement has been
// updated to disable furter Commands (I.e. it is made sure that the SI-side
// Command has been forwarded to both Cmd FIFO and MI-side).
//
// It is allowed to continue pushing new commands as long as
// * There is room in the queue(s)
// * The ID is the same as previously queued. Since data is not reordered
// for the same ID it is always OK to let them proceed.
// Or, if no split transaction is ongoing any ID can be allowed.
//
/////////////////////////////////////////////////////////////////////////////
// Keep track of current ID in queue.
always @ (posedge ACLK) begin
if (ARESET) begin
queue_id <= {C_AXI_ID_WIDTH{1'b0}};
multiple_id_non_split <= 1'b0;
split_in_progress <= 1'b0;
end else begin
if ( cmd_push ) begin
// Store ID (it will be matching ID or a "new beginning").
queue_id <= S_AXI_AID_Q;
end
if ( no_cmd & no_b_cmd ) begin
multiple_id_non_split <= 1'b0;
end else if ( cmd_push & allow_non_split_cmd & ~id_match ) begin
multiple_id_non_split <= 1'b1;
end
if ( no_cmd & no_b_cmd ) begin
split_in_progress <= 1'b0;
end else if ( cmd_push & allow_split_cmd ) begin
split_in_progress <= 1'b1;
end
end
end
// Determine if the command FIFOs are empty.
assign no_cmd = almost_empty & cmd_ready | cmd_empty;
assign no_b_cmd = almost_b_empty & cmd_b_ready | cmd_b_empty;
// Check ID to make sure this command is allowed.
assign id_match = ( C_SINGLE_THREAD == 0 ) | ( queue_id == S_AXI_AID_Q);
assign cmd_id_check = (cmd_empty & cmd_b_empty) | ( id_match & (~cmd_empty | ~cmd_b_empty) );
// Command type affects possibility to push immediately or wait.
assign allow_split_cmd = need_to_split_q & cmd_id_check & ~multiple_id_non_split;
assign allow_non_split_cmd = ~need_to_split_q & (cmd_id_check | ~split_in_progress);
assign allow_this_cmd = allow_split_cmd | allow_non_split_cmd | ( C_SINGLE_THREAD == 0 );
// Check if it is allowed to push more commands.
assign allow_new_cmd = (~cmd_full & ~cmd_b_full & allow_this_cmd) |
cmd_push_block;
// Push new command when allowed and MI-side is able to receive the command.
assign cmd_push = M_AXI_AVALID_I & ~cmd_push_block;
assign cmd_b_push = M_AXI_AVALID_I & ~cmd_b_push_block & (C_AXI_CHANNEL == 0);
// Block furter push until command has been forwarded to MI-side.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_push_block <= 1'b0;
end else begin
if ( pushed_new_cmd ) begin
cmd_push_block <= 1'b0;
end else if ( cmd_push & mi_stalling ) begin
cmd_push_block <= 1'b1;
end
end
end
// Block furter push until command has been forwarded to MI-side.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_push_block <= 1'b0;
end else begin
if ( S_AXI_AREADY_I ) begin
cmd_b_push_block <= 1'b0;
end else if ( cmd_b_push ) begin
cmd_b_push_block <= 1'b1;
end
end
end
// Acknowledge command when we can push it into queue (and forward it).
assign pushed_new_cmd = M_AXI_AVALID_I & M_AXI_AREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Command Queue (W/R):
//
// Instantiate a FIFO as the queue and adjust the control signals.
//
// The features from Command FIFO can be reduced depending on configuration:
// Read Channel only need the split information.
// Write Channel always require ID information. When bursts are supported
// Split and Length information is also used.
//
/////////////////////////////////////////////////////////////////////////////
// Instantiated queue.
generate
if ( C_AXI_CHANNEL == 1 && C_SUPPORT_SPLITTING == 1 && C_SUPPORT_BURSTS == 1 ) begin : USE_R_CHANNEL
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(1),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_split_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_split}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_id = {C_AXI_ID_WIDTH{1'b0}};
assign cmd_length = 4'b0;
end else if (C_SUPPORT_BURSTS == 1) begin : USE_BURSTS
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(C_AXI_ID_WIDTH+4),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_id_i, cmd_length_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_id, cmd_length}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_split = 1'b0;
end else begin : NO_BURSTS
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(C_AXI_ID_WIDTH),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_id_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_id}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_split = 1'b0;
assign cmd_length = 4'b0;
end
endgenerate
// Queue is concidered full when not ready.
assign cmd_full = ~s_ready;
// Queue is empty when no data at output port.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_empty <= 1'b1;
cmd_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
if ( cmd_push & ~cmd_ready ) begin
// Push only => Increase depth.
cmd_depth <= cmd_depth + 1'b1;
cmd_empty <= 1'b0;
end else if ( ~cmd_push & cmd_ready ) begin
// Pop only => Decrease depth.
cmd_depth <= cmd_depth - 1'b1;
cmd_empty <= almost_empty;
end
end
end
assign almost_empty = ( cmd_depth == 1 );
/////////////////////////////////////////////////////////////////////////////
// Command Queue (B):
//
// Add command queue for B channel only when it is AW channel and both burst
// and splitting is supported.
//
// When turned off the command appears always empty.
//
/////////////////////////////////////////////////////////////////////////////
// Instantiated queue.
generate
if ( C_AXI_CHANNEL == 0 && C_SUPPORT_SPLITTING == 1 && C_SUPPORT_BURSTS == 1 ) begin : USE_B_CHANNEL
wire cmd_b_valid_i;
wire s_b_ready;
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(1+4),
.C_FIFO_TYPE("lut")
)
cmd_b_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_b_split_i, cmd_b_repeat_i}),
.S_VALID(cmd_b_push),
.S_READY(s_b_ready),
.M_MESG({cmd_b_split, cmd_b_repeat}),
.M_VALID(cmd_b_valid_i),
.M_READY(cmd_b_ready)
);
// Queue is concidered full when not ready.
assign cmd_b_full = ~s_b_ready;
// Queue is empty when no data at output port.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
if ( cmd_b_push & ~cmd_b_ready ) begin
// Push only => Increase depth.
cmd_b_depth <= cmd_b_depth + 1'b1;
cmd_b_empty <= 1'b0;
end else if ( ~cmd_b_push & cmd_b_ready ) begin
// Pop only => Decrease depth.
cmd_b_depth <= cmd_b_depth - 1'b1;
cmd_b_empty <= ( cmd_b_depth == 1 );
end
end
end
assign almost_b_empty = ( cmd_b_depth == 1 );
// Assign external signal.
assign cmd_b_valid = cmd_b_valid_i;
end else begin : NO_B_CHANNEL
// Assign external command signals.
assign cmd_b_valid = 1'b0;
assign cmd_b_split = 1'b0;
assign cmd_b_repeat = 4'b0;
// Assign internal command FIFO signals.
assign cmd_b_full = 1'b0;
assign almost_b_empty = 1'b0;
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
// Constant FF due to ModelSim behavior.
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end
end
end
endgenerate
/////////////////////////////////////////////////////////////////////////////
// MI-side output handling
//
/////////////////////////////////////////////////////////////////////////////
assign M_AXI_AID = M_AXI_AID_I;
assign M_AXI_AADDR = M_AXI_AADDR_I;
assign M_AXI_ALEN = M_AXI_ALEN_I;
assign M_AXI_ASIZE = M_AXI_ASIZE_I;
assign M_AXI_ABURST = M_AXI_ABURST_I;
assign M_AXI_ALOCK = M_AXI_ALOCK_I;
assign M_AXI_ACACHE = M_AXI_ACACHE_I;
assign M_AXI_APROT = M_AXI_APROT_I;
assign M_AXI_AQOS = M_AXI_AQOS_I;
assign M_AXI_AUSER = M_AXI_AUSER_I;
assign M_AXI_AVALID = M_AXI_AVALID_I;
assign M_AXI_AREADY_I = M_AXI_AREADY;
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: Address AXI3 Slave Converter
//
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// a_axi3_conv
// axic_fifo
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_a_axi3_conv #
(
parameter C_FAMILY = "none",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_USER_SIGNALS = 0,
parameter integer C_AXI_AUSER_WIDTH = 1,
parameter integer C_AXI_CHANNEL = 0,
// 0 = AXI AW Channel.
// 1 = AXI AR Channel.
parameter integer C_SUPPORT_SPLITTING = 1,
// Implement transaction splitting logic.
// Disabled whan all connected masters are AXI3 and have same or narrower data width.
parameter integer C_SUPPORT_BURSTS = 1,
// Disabled when all connected masters are AxiLite,
// allowing logic to be simplified.
parameter integer C_SINGLE_THREAD = 1
// 0 = Ignore ID when propagating transactions (assume all responses are in order).
// 1 = Enforce single-threading (one ID at a time) when any outstanding or
// requested transaction requires splitting.
// While no split is ongoing any new non-split transaction will pass immediately regardless
// off ID.
// A split transaction will stall if there are multiple ID (non-split) transactions
// ongoing, once it has been forwarded only transactions with the same ID is allowed
// (split or not) until all ongoing split transactios has been completed.
)
(
// System Signals
input wire ACLK,
input wire ARESET,
// Command Interface (W/R)
output wire cmd_valid,
output wire cmd_split,
output wire [C_AXI_ID_WIDTH-1:0] cmd_id,
output wire [4-1:0] cmd_length,
input wire cmd_ready,
// Command Interface (B)
output wire cmd_b_valid,
output wire cmd_b_split,
output wire [4-1:0] cmd_b_repeat,
input wire cmd_b_ready,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AADDR,
input wire [8-1:0] S_AXI_ALEN,
input wire [3-1:0] S_AXI_ASIZE,
input wire [2-1:0] S_AXI_ABURST,
input wire [1-1:0] S_AXI_ALOCK,
input wire [4-1:0] S_AXI_ACACHE,
input wire [3-1:0] S_AXI_APROT,
input wire [4-1:0] S_AXI_AQOS,
input wire [C_AXI_AUSER_WIDTH-1:0] S_AXI_AUSER,
input wire S_AXI_AVALID,
output wire S_AXI_AREADY,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_AID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AADDR,
output wire [4-1:0] M_AXI_ALEN,
output wire [3-1:0] M_AXI_ASIZE,
output wire [2-1:0] M_AXI_ABURST,
output wire [2-1:0] M_AXI_ALOCK,
output wire [4-1:0] M_AXI_ACACHE,
output wire [3-1:0] M_AXI_APROT,
output wire [4-1:0] M_AXI_AQOS,
output wire [C_AXI_AUSER_WIDTH-1:0] M_AXI_AUSER,
output wire M_AXI_AVALID,
input wire M_AXI_AREADY
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Constants for burst types.
localparam [2-1:0] C_FIX_BURST = 2'b00;
localparam [2-1:0] C_INCR_BURST = 2'b01;
localparam [2-1:0] C_WRAP_BURST = 2'b10;
// Depth for command FIFO.
localparam integer C_FIFO_DEPTH_LOG = 5;
// Constants used to generate size mask.
localparam [C_AXI_ADDR_WIDTH+8-1:0] C_SIZE_MASK = {{C_AXI_ADDR_WIDTH{1'b1}}, 8'b0000_0000};
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Access decoding related signals.
wire access_is_incr;
wire [4-1:0] num_transactions;
wire incr_need_to_split;
reg [C_AXI_ADDR_WIDTH-1:0] next_mi_addr;
reg split_ongoing;
reg [4-1:0] pushed_commands;
reg [16-1:0] addr_step;
reg [16-1:0] first_step;
wire [8-1:0] first_beats;
reg [C_AXI_ADDR_WIDTH-1:0] size_mask;
// Access decoding related signals for internal pipestage.
reg access_is_incr_q;
reg incr_need_to_split_q;
wire need_to_split_q;
reg [4-1:0] num_transactions_q;
reg [16-1:0] addr_step_q;
reg [16-1:0] first_step_q;
reg [C_AXI_ADDR_WIDTH-1:0] size_mask_q;
// Command buffer help signals.
reg [C_FIFO_DEPTH_LOG:0] cmd_depth;
reg cmd_empty;
reg [C_AXI_ID_WIDTH-1:0] queue_id;
wire id_match;
wire cmd_id_check;
wire s_ready;
wire cmd_full;
wire allow_this_cmd;
wire allow_new_cmd;
wire cmd_push;
reg cmd_push_block;
reg [C_FIFO_DEPTH_LOG:0] cmd_b_depth;
reg cmd_b_empty;
wire cmd_b_full;
wire cmd_b_push;
reg cmd_b_push_block;
wire pushed_new_cmd;
wire last_incr_split;
wire last_split;
wire first_split;
wire no_cmd;
wire allow_split_cmd;
wire almost_empty;
wire no_b_cmd;
wire allow_non_split_cmd;
wire almost_b_empty;
reg multiple_id_non_split;
reg split_in_progress;
// Internal Command Interface signals (W/R).
wire cmd_split_i;
wire [C_AXI_ID_WIDTH-1:0] cmd_id_i;
reg [4-1:0] cmd_length_i;
// Internal Command Interface signals (B).
wire cmd_b_split_i;
wire [4-1:0] cmd_b_repeat_i;
// Throttling help signals.
wire mi_stalling;
reg command_ongoing;
// Internal SI-side signals.
reg [C_AXI_ID_WIDTH-1:0] S_AXI_AID_Q;
reg [C_AXI_ADDR_WIDTH-1:0] S_AXI_AADDR_Q;
reg [8-1:0] S_AXI_ALEN_Q;
reg [3-1:0] S_AXI_ASIZE_Q;
reg [2-1:0] S_AXI_ABURST_Q;
reg [2-1:0] S_AXI_ALOCK_Q;
reg [4-1:0] S_AXI_ACACHE_Q;
reg [3-1:0] S_AXI_APROT_Q;
reg [4-1:0] S_AXI_AQOS_Q;
reg [C_AXI_AUSER_WIDTH-1:0] S_AXI_AUSER_Q;
reg S_AXI_AREADY_I;
// Internal MI-side signals.
wire [C_AXI_ID_WIDTH-1:0] M_AXI_AID_I;
reg [C_AXI_ADDR_WIDTH-1:0] M_AXI_AADDR_I;
reg [8-1:0] M_AXI_ALEN_I;
wire [3-1:0] M_AXI_ASIZE_I;
wire [2-1:0] M_AXI_ABURST_I;
reg [2-1:0] M_AXI_ALOCK_I;
wire [4-1:0] M_AXI_ACACHE_I;
wire [3-1:0] M_AXI_APROT_I;
wire [4-1:0] M_AXI_AQOS_I;
wire [C_AXI_AUSER_WIDTH-1:0] M_AXI_AUSER_I;
wire M_AXI_AVALID_I;
wire M_AXI_AREADY_I;
reg [1:0] areset_d; // Reset delay register
always @(posedge ACLK) begin
areset_d <= {areset_d[0], ARESET};
end
/////////////////////////////////////////////////////////////////////////////
// Capture SI-Side signals.
//
/////////////////////////////////////////////////////////////////////////////
// Register SI-Side signals.
always @ (posedge ACLK) begin
if ( ARESET ) begin
S_AXI_AID_Q <= {C_AXI_ID_WIDTH{1'b0}};
S_AXI_AADDR_Q <= {C_AXI_ADDR_WIDTH{1'b0}};
S_AXI_ALEN_Q <= 8'b0;
S_AXI_ASIZE_Q <= 3'b0;
S_AXI_ABURST_Q <= 2'b0;
S_AXI_ALOCK_Q <= 2'b0;
S_AXI_ACACHE_Q <= 4'b0;
S_AXI_APROT_Q <= 3'b0;
S_AXI_AQOS_Q <= 4'b0;
S_AXI_AUSER_Q <= {C_AXI_AUSER_WIDTH{1'b0}};
end else begin
if ( S_AXI_AREADY_I ) begin
S_AXI_AID_Q <= S_AXI_AID;
S_AXI_AADDR_Q <= S_AXI_AADDR;
S_AXI_ALEN_Q <= S_AXI_ALEN;
S_AXI_ASIZE_Q <= S_AXI_ASIZE;
S_AXI_ABURST_Q <= S_AXI_ABURST;
S_AXI_ALOCK_Q <= S_AXI_ALOCK;
S_AXI_ACACHE_Q <= S_AXI_ACACHE;
S_AXI_APROT_Q <= S_AXI_APROT;
S_AXI_AQOS_Q <= S_AXI_AQOS;
S_AXI_AUSER_Q <= S_AXI_AUSER;
end
end
end
/////////////////////////////////////////////////////////////////////////////
// Decode the Incoming Transaction.
//
// Extract transaction type and the number of splits that may be needed.
//
// Calculate the step size so that the address for each part of a split can
// can be calculated.
//
/////////////////////////////////////////////////////////////////////////////
// Transaction burst type.
assign access_is_incr = ( S_AXI_ABURST == C_INCR_BURST );
// Get number of transactions for split INCR.
assign num_transactions = S_AXI_ALEN[4 +: 4];
assign first_beats = {3'b0, S_AXI_ALEN[0 +: 4]} + 7'b01;
// Generate address increment of first split transaction.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: first_step = first_beats << 0;
3'b001: first_step = first_beats << 1;
3'b010: first_step = first_beats << 2;
3'b011: first_step = first_beats << 3;
3'b100: first_step = first_beats << 4;
3'b101: first_step = first_beats << 5;
3'b110: first_step = first_beats << 6;
3'b111: first_step = first_beats << 7;
endcase
end
// Generate address increment for remaining split transactions.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: addr_step = 16'h0010;
3'b001: addr_step = 16'h0020;
3'b010: addr_step = 16'h0040;
3'b011: addr_step = 16'h0080;
3'b100: addr_step = 16'h0100;
3'b101: addr_step = 16'h0200;
3'b110: addr_step = 16'h0400;
3'b111: addr_step = 16'h0800;
endcase
end
// Generate address mask bits to remove split transaction unalignment.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: size_mask = C_SIZE_MASK[8 +: C_AXI_ADDR_WIDTH];
3'b001: size_mask = C_SIZE_MASK[7 +: C_AXI_ADDR_WIDTH];
3'b010: size_mask = C_SIZE_MASK[6 +: C_AXI_ADDR_WIDTH];
3'b011: size_mask = C_SIZE_MASK[5 +: C_AXI_ADDR_WIDTH];
3'b100: size_mask = C_SIZE_MASK[4 +: C_AXI_ADDR_WIDTH];
3'b101: size_mask = C_SIZE_MASK[3 +: C_AXI_ADDR_WIDTH];
3'b110: size_mask = C_SIZE_MASK[2 +: C_AXI_ADDR_WIDTH];
3'b111: size_mask = C_SIZE_MASK[1 +: C_AXI_ADDR_WIDTH];
endcase
end
/////////////////////////////////////////////////////////////////////////////
// Transfer SI-Side signals to internal Pipeline Stage.
//
/////////////////////////////////////////////////////////////////////////////
always @ (posedge ACLK) begin
if ( ARESET ) begin
access_is_incr_q <= 1'b0;
incr_need_to_split_q <= 1'b0;
num_transactions_q <= 4'b0;
addr_step_q <= 16'b0;
first_step_q <= 16'b0;
size_mask_q <= {C_AXI_ADDR_WIDTH{1'b0}};
end else begin
if ( S_AXI_AREADY_I ) begin
access_is_incr_q <= access_is_incr;
incr_need_to_split_q <= incr_need_to_split;
num_transactions_q <= num_transactions;
addr_step_q <= addr_step;
first_step_q <= first_step;
size_mask_q <= size_mask;
end
end
end
/////////////////////////////////////////////////////////////////////////////
// Generate Command Information.
//
// Detect if current transation needs to be split, and keep track of all
// the generated split transactions.
//
//
/////////////////////////////////////////////////////////////////////////////
// Detect when INCR must be split.
assign incr_need_to_split = access_is_incr & ( num_transactions != 0 ) &
( C_SUPPORT_SPLITTING == 1 ) &
( C_SUPPORT_BURSTS == 1 );
// Detect when a command has to be split.
assign need_to_split_q = incr_need_to_split_q;
// Handle progress of split transactions.
always @ (posedge ACLK) begin
if ( ARESET ) begin
split_ongoing <= 1'b0;
end else begin
if ( pushed_new_cmd ) begin
split_ongoing <= need_to_split_q & ~last_split;
end
end
end
// Keep track of number of transactions generated.
always @ (posedge ACLK) begin
if ( ARESET ) begin
pushed_commands <= 4'b0;
end else begin
if ( S_AXI_AREADY_I ) begin
pushed_commands <= 4'b0;
end else if ( pushed_new_cmd ) begin
pushed_commands <= pushed_commands + 4'b1;
end
end
end
// Detect last part of a command, split or not.
assign last_incr_split = access_is_incr_q & ( num_transactions_q == pushed_commands );
assign last_split = last_incr_split | ~access_is_incr_q |
( C_SUPPORT_SPLITTING == 0 ) |
( C_SUPPORT_BURSTS == 0 );
assign first_split = (pushed_commands == 4'b0);
// Calculate base for next address.
always @ (posedge ACLK) begin
if ( ARESET ) begin
next_mi_addr = {C_AXI_ADDR_WIDTH{1'b0}};
end else if ( pushed_new_cmd ) begin
next_mi_addr = M_AXI_AADDR_I + (first_split ? first_step_q : addr_step_q);
end
end
/////////////////////////////////////////////////////////////////////////////
// Translating Transaction.
//
// Set Split transaction information on all part except last for a transaction
// that needs splitting.
// The B Channel will only get one command for a Split transaction and in
// the Split bflag will be set in that case.
//
// The AWID is extracted and applied to all commands generated for the current
// incomming SI-Side transaction.
//
// The address is increased for each part of a Split transaction, the amount
// depends on the siSIZE for the transaction.
//
// The length has to be changed for Split transactions. All part except tha
// last one will have 0xF, the last one uses the 4 lsb bits from the SI-side
// transaction as length.
//
// Non-Split has untouched address and length information.
//
// Exclusive access are diasabled for a Split transaction because it is not
// possible to guarantee concistency between all the parts.
//
/////////////////////////////////////////////////////////////////////////////
// Assign Split signals.
assign cmd_split_i = need_to_split_q & ~last_split;
assign cmd_b_split_i = need_to_split_q & ~last_split;
// Copy AW ID to W.
assign cmd_id_i = S_AXI_AID_Q;
// Set B Responses to merge.
assign cmd_b_repeat_i = num_transactions_q;
// Select new size or remaining size.
always @ *
begin
if ( split_ongoing & access_is_incr_q ) begin
M_AXI_AADDR_I = next_mi_addr & size_mask_q;
end else begin
M_AXI_AADDR_I = S_AXI_AADDR_Q;
end
end
// Generate the base length for each transaction.
always @ *
begin
if ( first_split | ~need_to_split_q ) begin
M_AXI_ALEN_I = S_AXI_ALEN_Q[0 +: 4];
cmd_length_i = S_AXI_ALEN_Q[0 +: 4];
end else begin
M_AXI_ALEN_I = 4'hF;
cmd_length_i = 4'hF;
end
end
// Kill Exclusive for Split transactions.
always @ *
begin
if ( need_to_split_q ) begin
M_AXI_ALOCK_I = 2'b00;
end else begin
M_AXI_ALOCK_I = {1'b0, S_AXI_ALOCK_Q};
end
end
/////////////////////////////////////////////////////////////////////////////
// Forward the command to the MI-side interface.
//
// It is determined that this is an allowed command/access when there is
// room in the command queue (and it passes ID and Split checks as required).
//
/////////////////////////////////////////////////////////////////////////////
// Move SI-side transaction to internal pipe stage.
always @ (posedge ACLK) begin
if (ARESET) begin
command_ongoing <= 1'b0;
S_AXI_AREADY_I <= 1'b0;
end else begin
if (areset_d == 2'b10) begin
S_AXI_AREADY_I <= 1'b1;
end else begin
if ( S_AXI_AVALID & S_AXI_AREADY_I ) begin
command_ongoing <= 1'b1;
S_AXI_AREADY_I <= 1'b0;
end else if ( pushed_new_cmd & last_split ) begin
command_ongoing <= 1'b0;
S_AXI_AREADY_I <= 1'b1;
end
end
end
end
// Generate ready signal.
assign S_AXI_AREADY = S_AXI_AREADY_I;
// Only allowed to forward translated command when command queue is ok with it.
assign M_AXI_AVALID_I = allow_new_cmd & command_ongoing;
// Detect when MI-side is stalling.
assign mi_stalling = M_AXI_AVALID_I & ~M_AXI_AREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Simple transfer of paramters that doesn't need to be adjusted.
//
// ID - Transaction still recognized with the same ID.
// CACHE - No need to change the chache features. Even if the modyfiable
// bit is overridden (forcefully) there is no need to let downstream
// component beleive it is ok to modify it further.
// PROT - Security level of access is not changed when upsizing.
// QOS - Quality of Service is static 0.
// USER - User bits remains the same.
//
/////////////////////////////////////////////////////////////////////////////
assign M_AXI_AID_I = S_AXI_AID_Q;
assign M_AXI_ASIZE_I = S_AXI_ASIZE_Q;
assign M_AXI_ABURST_I = S_AXI_ABURST_Q;
assign M_AXI_ACACHE_I = S_AXI_ACACHE_Q;
assign M_AXI_APROT_I = S_AXI_APROT_Q;
assign M_AXI_AQOS_I = S_AXI_AQOS_Q;
assign M_AXI_AUSER_I = ( C_AXI_SUPPORTS_USER_SIGNALS ) ? S_AXI_AUSER_Q : {C_AXI_AUSER_WIDTH{1'b0}};
/////////////////////////////////////////////////////////////////////////////
// Control command queue to W/R channel.
//
// Commands can be pushed into the Cmd FIFO even if MI-side is stalling.
// A flag is set if MI-side is stalling when Command is pushed to the
// Cmd FIFO. This will prevent multiple push of the same Command as well as
// keeping the MI-side Valid signal if the Allow Cmd requirement has been
// updated to disable furter Commands (I.e. it is made sure that the SI-side
// Command has been forwarded to both Cmd FIFO and MI-side).
//
// It is allowed to continue pushing new commands as long as
// * There is room in the queue(s)
// * The ID is the same as previously queued. Since data is not reordered
// for the same ID it is always OK to let them proceed.
// Or, if no split transaction is ongoing any ID can be allowed.
//
/////////////////////////////////////////////////////////////////////////////
// Keep track of current ID in queue.
always @ (posedge ACLK) begin
if (ARESET) begin
queue_id <= {C_AXI_ID_WIDTH{1'b0}};
multiple_id_non_split <= 1'b0;
split_in_progress <= 1'b0;
end else begin
if ( cmd_push ) begin
// Store ID (it will be matching ID or a "new beginning").
queue_id <= S_AXI_AID_Q;
end
if ( no_cmd & no_b_cmd ) begin
multiple_id_non_split <= 1'b0;
end else if ( cmd_push & allow_non_split_cmd & ~id_match ) begin
multiple_id_non_split <= 1'b1;
end
if ( no_cmd & no_b_cmd ) begin
split_in_progress <= 1'b0;
end else if ( cmd_push & allow_split_cmd ) begin
split_in_progress <= 1'b1;
end
end
end
// Determine if the command FIFOs are empty.
assign no_cmd = almost_empty & cmd_ready | cmd_empty;
assign no_b_cmd = almost_b_empty & cmd_b_ready | cmd_b_empty;
// Check ID to make sure this command is allowed.
assign id_match = ( C_SINGLE_THREAD == 0 ) | ( queue_id == S_AXI_AID_Q);
assign cmd_id_check = (cmd_empty & cmd_b_empty) | ( id_match & (~cmd_empty | ~cmd_b_empty) );
// Command type affects possibility to push immediately or wait.
assign allow_split_cmd = need_to_split_q & cmd_id_check & ~multiple_id_non_split;
assign allow_non_split_cmd = ~need_to_split_q & (cmd_id_check | ~split_in_progress);
assign allow_this_cmd = allow_split_cmd | allow_non_split_cmd | ( C_SINGLE_THREAD == 0 );
// Check if it is allowed to push more commands.
assign allow_new_cmd = (~cmd_full & ~cmd_b_full & allow_this_cmd) |
cmd_push_block;
// Push new command when allowed and MI-side is able to receive the command.
assign cmd_push = M_AXI_AVALID_I & ~cmd_push_block;
assign cmd_b_push = M_AXI_AVALID_I & ~cmd_b_push_block & (C_AXI_CHANNEL == 0);
// Block furter push until command has been forwarded to MI-side.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_push_block <= 1'b0;
end else begin
if ( pushed_new_cmd ) begin
cmd_push_block <= 1'b0;
end else if ( cmd_push & mi_stalling ) begin
cmd_push_block <= 1'b1;
end
end
end
// Block furter push until command has been forwarded to MI-side.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_push_block <= 1'b0;
end else begin
if ( S_AXI_AREADY_I ) begin
cmd_b_push_block <= 1'b0;
end else if ( cmd_b_push ) begin
cmd_b_push_block <= 1'b1;
end
end
end
// Acknowledge command when we can push it into queue (and forward it).
assign pushed_new_cmd = M_AXI_AVALID_I & M_AXI_AREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Command Queue (W/R):
//
// Instantiate a FIFO as the queue and adjust the control signals.
//
// The features from Command FIFO can be reduced depending on configuration:
// Read Channel only need the split information.
// Write Channel always require ID information. When bursts are supported
// Split and Length information is also used.
//
/////////////////////////////////////////////////////////////////////////////
// Instantiated queue.
generate
if ( C_AXI_CHANNEL == 1 && C_SUPPORT_SPLITTING == 1 && C_SUPPORT_BURSTS == 1 ) begin : USE_R_CHANNEL
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(1),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_split_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_split}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_id = {C_AXI_ID_WIDTH{1'b0}};
assign cmd_length = 4'b0;
end else if (C_SUPPORT_BURSTS == 1) begin : USE_BURSTS
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(C_AXI_ID_WIDTH+4),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_id_i, cmd_length_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_id, cmd_length}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_split = 1'b0;
end else begin : NO_BURSTS
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(C_AXI_ID_WIDTH),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_id_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_id}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_split = 1'b0;
assign cmd_length = 4'b0;
end
endgenerate
// Queue is concidered full when not ready.
assign cmd_full = ~s_ready;
// Queue is empty when no data at output port.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_empty <= 1'b1;
cmd_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
if ( cmd_push & ~cmd_ready ) begin
// Push only => Increase depth.
cmd_depth <= cmd_depth + 1'b1;
cmd_empty <= 1'b0;
end else if ( ~cmd_push & cmd_ready ) begin
// Pop only => Decrease depth.
cmd_depth <= cmd_depth - 1'b1;
cmd_empty <= almost_empty;
end
end
end
assign almost_empty = ( cmd_depth == 1 );
/////////////////////////////////////////////////////////////////////////////
// Command Queue (B):
//
// Add command queue for B channel only when it is AW channel and both burst
// and splitting is supported.
//
// When turned off the command appears always empty.
//
/////////////////////////////////////////////////////////////////////////////
// Instantiated queue.
generate
if ( C_AXI_CHANNEL == 0 && C_SUPPORT_SPLITTING == 1 && C_SUPPORT_BURSTS == 1 ) begin : USE_B_CHANNEL
wire cmd_b_valid_i;
wire s_b_ready;
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(1+4),
.C_FIFO_TYPE("lut")
)
cmd_b_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_b_split_i, cmd_b_repeat_i}),
.S_VALID(cmd_b_push),
.S_READY(s_b_ready),
.M_MESG({cmd_b_split, cmd_b_repeat}),
.M_VALID(cmd_b_valid_i),
.M_READY(cmd_b_ready)
);
// Queue is concidered full when not ready.
assign cmd_b_full = ~s_b_ready;
// Queue is empty when no data at output port.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
if ( cmd_b_push & ~cmd_b_ready ) begin
// Push only => Increase depth.
cmd_b_depth <= cmd_b_depth + 1'b1;
cmd_b_empty <= 1'b0;
end else if ( ~cmd_b_push & cmd_b_ready ) begin
// Pop only => Decrease depth.
cmd_b_depth <= cmd_b_depth - 1'b1;
cmd_b_empty <= ( cmd_b_depth == 1 );
end
end
end
assign almost_b_empty = ( cmd_b_depth == 1 );
// Assign external signal.
assign cmd_b_valid = cmd_b_valid_i;
end else begin : NO_B_CHANNEL
// Assign external command signals.
assign cmd_b_valid = 1'b0;
assign cmd_b_split = 1'b0;
assign cmd_b_repeat = 4'b0;
// Assign internal command FIFO signals.
assign cmd_b_full = 1'b0;
assign almost_b_empty = 1'b0;
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
// Constant FF due to ModelSim behavior.
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end
end
end
endgenerate
/////////////////////////////////////////////////////////////////////////////
// MI-side output handling
//
/////////////////////////////////////////////////////////////////////////////
assign M_AXI_AID = M_AXI_AID_I;
assign M_AXI_AADDR = M_AXI_AADDR_I;
assign M_AXI_ALEN = M_AXI_ALEN_I;
assign M_AXI_ASIZE = M_AXI_ASIZE_I;
assign M_AXI_ABURST = M_AXI_ABURST_I;
assign M_AXI_ALOCK = M_AXI_ALOCK_I;
assign M_AXI_ACACHE = M_AXI_ACACHE_I;
assign M_AXI_APROT = M_AXI_APROT_I;
assign M_AXI_AQOS = M_AXI_AQOS_I;
assign M_AXI_AUSER = M_AXI_AUSER_I;
assign M_AXI_AVALID = M_AXI_AVALID_I;
assign M_AXI_AREADY_I = M_AXI_AREADY;
endmodule
|
// This is a component of pluto_servo, a PWM servo driver and quadrature
// counter for emc2
// Copyright 2006 Jeff Epler <[email protected]>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1507 USA
module quad(clk, A, B, Z, zr, out);
parameter W=14;
input clk, A, B, Z, zr;
reg [(W-1):0] c, i; reg zl;
output [2*W:0] out = { zl, i, c };
// reg [(W-1):0] c, i; reg zl;
reg [2:0] Ad, Bd;
reg [2:0] Zc;
always @(posedge clk) Ad <= {Ad[1:0], A};
always @(posedge clk) Bd <= {Bd[1:0], B};
wire good_one = &Zc;
wire good_zero = ~|Zc;
reg last_good;
wire index_pulse = good_one && ! last_good;
wire count_enable = Ad[1] ^ Ad[2] ^ Bd[1] ^ Bd[2];
wire count_direction = Ad[1] ^ Bd[2];
always @(posedge clk)
begin
if(Z && !good_one) Zc <= Zc + 2'b1;
else if(!good_zero) Zc <= Zc - 2'b1;
if(good_one) last_good <= 1;
else if(good_zero) last_good <= 0;
if(count_enable)
begin
if(count_direction) c <= c + 1'd1;
else c <= c - 1'd1;
end
if(index_pulse) begin
i <= c;
zl <= 1;
end else if(zr) begin
zl <= 0;
end
end
endmodule
|
// This is a component of pluto_servo, a PWM servo driver and quadrature
// counter for emc2
// Copyright 2006 Jeff Epler <[email protected]>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1507 USA
module quad(clk, A, B, Z, zr, out);
parameter W=14;
input clk, A, B, Z, zr;
reg [(W-1):0] c, i; reg zl;
output [2*W:0] out = { zl, i, c };
// reg [(W-1):0] c, i; reg zl;
reg [2:0] Ad, Bd;
reg [2:0] Zc;
always @(posedge clk) Ad <= {Ad[1:0], A};
always @(posedge clk) Bd <= {Bd[1:0], B};
wire good_one = &Zc;
wire good_zero = ~|Zc;
reg last_good;
wire index_pulse = good_one && ! last_good;
wire count_enable = Ad[1] ^ Ad[2] ^ Bd[1] ^ Bd[2];
wire count_direction = Ad[1] ^ Bd[2];
always @(posedge clk)
begin
if(Z && !good_one) Zc <= Zc + 2'b1;
else if(!good_zero) Zc <= Zc - 2'b1;
if(good_one) last_good <= 1;
else if(good_zero) last_good <= 0;
if(count_enable)
begin
if(count_direction) c <= c + 1'd1;
else c <= c - 1'd1;
end
if(index_pulse) begin
i <= c;
zl <= 1;
end else if(zr) begin
zl <= 0;
end
end
endmodule
|
// This is a component of pluto_servo, a PWM servo driver and quadrature
// counter for emc2
// Copyright 2006 Jeff Epler <[email protected]>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1507 USA
module quad(clk, A, B, Z, zr, out);
parameter W=14;
input clk, A, B, Z, zr;
reg [(W-1):0] c, i; reg zl;
output [2*W:0] out = { zl, i, c };
// reg [(W-1):0] c, i; reg zl;
reg [2:0] Ad, Bd;
reg [2:0] Zc;
always @(posedge clk) Ad <= {Ad[1:0], A};
always @(posedge clk) Bd <= {Bd[1:0], B};
wire good_one = &Zc;
wire good_zero = ~|Zc;
reg last_good;
wire index_pulse = good_one && ! last_good;
wire count_enable = Ad[1] ^ Ad[2] ^ Bd[1] ^ Bd[2];
wire count_direction = Ad[1] ^ Bd[2];
always @(posedge clk)
begin
if(Z && !good_one) Zc <= Zc + 2'b1;
else if(!good_zero) Zc <= Zc - 2'b1;
if(good_one) last_good <= 1;
else if(good_zero) last_good <= 0;
if(count_enable)
begin
if(count_direction) c <= c + 1'd1;
else c <= c - 1'd1;
end
if(index_pulse) begin
i <= c;
zl <= 1;
end else if(zr) begin
zl <= 0;
end
end
endmodule
|
// This is a component of pluto_servo, a PWM servo driver and quadrature
// counter for emc2
// Copyright 2006 Jeff Epler <[email protected]>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1507 USA
module quad(clk, A, B, Z, zr, out);
parameter W=14;
input clk, A, B, Z, zr;
reg [(W-1):0] c, i; reg zl;
output [2*W:0] out = { zl, i, c };
// reg [(W-1):0] c, i; reg zl;
reg [2:0] Ad, Bd;
reg [2:0] Zc;
always @(posedge clk) Ad <= {Ad[1:0], A};
always @(posedge clk) Bd <= {Bd[1:0], B};
wire good_one = &Zc;
wire good_zero = ~|Zc;
reg last_good;
wire index_pulse = good_one && ! last_good;
wire count_enable = Ad[1] ^ Ad[2] ^ Bd[1] ^ Bd[2];
wire count_direction = Ad[1] ^ Bd[2];
always @(posedge clk)
begin
if(Z && !good_one) Zc <= Zc + 2'b1;
else if(!good_zero) Zc <= Zc - 2'b1;
if(good_one) last_good <= 1;
else if(good_zero) last_good <= 0;
if(count_enable)
begin
if(count_direction) c <= c + 1'd1;
else c <= c - 1'd1;
end
if(index_pulse) begin
i <= c;
zl <= 1;
end else if(zr) begin
zl <= 0;
end
end
endmodule
|
// This is a component of pluto_servo, a PWM servo driver and quadrature
// counter for emc2
// Copyright 2006 Jeff Epler <[email protected]>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1507 USA
module quad(clk, A, B, Z, zr, out);
parameter W=14;
input clk, A, B, Z, zr;
reg [(W-1):0] c, i; reg zl;
output [2*W:0] out = { zl, i, c };
// reg [(W-1):0] c, i; reg zl;
reg [2:0] Ad, Bd;
reg [2:0] Zc;
always @(posedge clk) Ad <= {Ad[1:0], A};
always @(posedge clk) Bd <= {Bd[1:0], B};
wire good_one = &Zc;
wire good_zero = ~|Zc;
reg last_good;
wire index_pulse = good_one && ! last_good;
wire count_enable = Ad[1] ^ Ad[2] ^ Bd[1] ^ Bd[2];
wire count_direction = Ad[1] ^ Bd[2];
always @(posedge clk)
begin
if(Z && !good_one) Zc <= Zc + 2'b1;
else if(!good_zero) Zc <= Zc - 2'b1;
if(good_one) last_good <= 1;
else if(good_zero) last_good <= 0;
if(count_enable)
begin
if(count_direction) c <= c + 1'd1;
else c <= c - 1'd1;
end
if(index_pulse) begin
i <= c;
zl <= 1;
end else if(zr) begin
zl <= 0;
end
end
endmodule
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_wr_cmd_fsm.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_wr_cmd_fsm (
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
output wire s_awready ,
input wire s_awvalid ,
output wire m_awvalid ,
input wire m_awready ,
// signal to increment to the next mc transaction
output wire next ,
// signal to the fsm there is another transaction required
input wire next_pending ,
// Write Data portion has completed or Read FIFO has a slot available (not
// full)
output wire b_push ,
input wire b_full ,
output wire a_push
);
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
// States
localparam SM_IDLE = 2'b00;
localparam SM_CMD_EN = 2'b01;
localparam SM_CMD_ACCEPTED = 2'b10;
localparam SM_DONE_WAIT = 2'b11;
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [1:0] state;
// synthesis attribute MAX_FANOUT of state is 20;
reg [1:0] next_state;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
///////////////////////////////////////////////////////////////////////////////
always @(posedge clk) begin
if (reset) begin
state <= SM_IDLE;
end else begin
state <= next_state;
end
end
// Next state transitions.
always @( * )
begin
next_state = state;
case (state)
SM_IDLE:
if (s_awvalid) begin
next_state = SM_CMD_EN;
end else
next_state = state;
SM_CMD_EN:
if (m_awready & next_pending)
next_state = SM_CMD_ACCEPTED;
else if (m_awready & ~next_pending & b_full)
next_state = SM_DONE_WAIT;
else if (m_awready & ~next_pending & ~b_full)
next_state = SM_IDLE;
else
next_state = state;
SM_CMD_ACCEPTED:
next_state = SM_CMD_EN;
SM_DONE_WAIT:
if (!b_full)
next_state = SM_IDLE;
else
next_state = state;
default:
next_state = SM_IDLE;
endcase
end
// Assign outputs based on current state.
assign m_awvalid = (state == SM_CMD_EN);
assign next = ((state == SM_CMD_ACCEPTED)
| (((state == SM_CMD_EN) | (state == SM_DONE_WAIT)) & (next_state == SM_IDLE))) ;
assign a_push = (state == SM_IDLE);
assign s_awready = ((state == SM_CMD_EN) | (state == SM_DONE_WAIT)) & (next_state == SM_IDLE);
assign b_push = ((state == SM_CMD_EN) | (state == SM_DONE_WAIT)) & (next_state == SM_IDLE);
endmodule
`default_nettype wire
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_wr_cmd_fsm.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_wr_cmd_fsm (
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
output wire s_awready ,
input wire s_awvalid ,
output wire m_awvalid ,
input wire m_awready ,
// signal to increment to the next mc transaction
output wire next ,
// signal to the fsm there is another transaction required
input wire next_pending ,
// Write Data portion has completed or Read FIFO has a slot available (not
// full)
output wire b_push ,
input wire b_full ,
output wire a_push
);
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
// States
localparam SM_IDLE = 2'b00;
localparam SM_CMD_EN = 2'b01;
localparam SM_CMD_ACCEPTED = 2'b10;
localparam SM_DONE_WAIT = 2'b11;
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [1:0] state;
// synthesis attribute MAX_FANOUT of state is 20;
reg [1:0] next_state;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
///////////////////////////////////////////////////////////////////////////////
always @(posedge clk) begin
if (reset) begin
state <= SM_IDLE;
end else begin
state <= next_state;
end
end
// Next state transitions.
always @( * )
begin
next_state = state;
case (state)
SM_IDLE:
if (s_awvalid) begin
next_state = SM_CMD_EN;
end else
next_state = state;
SM_CMD_EN:
if (m_awready & next_pending)
next_state = SM_CMD_ACCEPTED;
else if (m_awready & ~next_pending & b_full)
next_state = SM_DONE_WAIT;
else if (m_awready & ~next_pending & ~b_full)
next_state = SM_IDLE;
else
next_state = state;
SM_CMD_ACCEPTED:
next_state = SM_CMD_EN;
SM_DONE_WAIT:
if (!b_full)
next_state = SM_IDLE;
else
next_state = state;
default:
next_state = SM_IDLE;
endcase
end
// Assign outputs based on current state.
assign m_awvalid = (state == SM_CMD_EN);
assign next = ((state == SM_CMD_ACCEPTED)
| (((state == SM_CMD_EN) | (state == SM_DONE_WAIT)) & (next_state == SM_IDLE))) ;
assign a_push = (state == SM_IDLE);
assign s_awready = ((state == SM_CMD_EN) | (state == SM_DONE_WAIT)) & (next_state == SM_IDLE);
assign b_push = ((state == SM_CMD_EN) | (state == SM_DONE_WAIT)) & (next_state == SM_IDLE);
endmodule
`default_nettype wire
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_wr_cmd_fsm.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_wr_cmd_fsm (
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
output wire s_awready ,
input wire s_awvalid ,
output wire m_awvalid ,
input wire m_awready ,
// signal to increment to the next mc transaction
output wire next ,
// signal to the fsm there is another transaction required
input wire next_pending ,
// Write Data portion has completed or Read FIFO has a slot available (not
// full)
output wire b_push ,
input wire b_full ,
output wire a_push
);
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
// States
localparam SM_IDLE = 2'b00;
localparam SM_CMD_EN = 2'b01;
localparam SM_CMD_ACCEPTED = 2'b10;
localparam SM_DONE_WAIT = 2'b11;
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [1:0] state;
// synthesis attribute MAX_FANOUT of state is 20;
reg [1:0] next_state;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
///////////////////////////////////////////////////////////////////////////////
always @(posedge clk) begin
if (reset) begin
state <= SM_IDLE;
end else begin
state <= next_state;
end
end
// Next state transitions.
always @( * )
begin
next_state = state;
case (state)
SM_IDLE:
if (s_awvalid) begin
next_state = SM_CMD_EN;
end else
next_state = state;
SM_CMD_EN:
if (m_awready & next_pending)
next_state = SM_CMD_ACCEPTED;
else if (m_awready & ~next_pending & b_full)
next_state = SM_DONE_WAIT;
else if (m_awready & ~next_pending & ~b_full)
next_state = SM_IDLE;
else
next_state = state;
SM_CMD_ACCEPTED:
next_state = SM_CMD_EN;
SM_DONE_WAIT:
if (!b_full)
next_state = SM_IDLE;
else
next_state = state;
default:
next_state = SM_IDLE;
endcase
end
// Assign outputs based on current state.
assign m_awvalid = (state == SM_CMD_EN);
assign next = ((state == SM_CMD_ACCEPTED)
| (((state == SM_CMD_EN) | (state == SM_DONE_WAIT)) & (next_state == SM_IDLE))) ;
assign a_push = (state == SM_IDLE);
assign s_awready = ((state == SM_CMD_EN) | (state == SM_DONE_WAIT)) & (next_state == SM_IDLE);
assign b_push = ((state == SM_CMD_EN) | (state == SM_DONE_WAIT)) & (next_state == SM_IDLE);
endmodule
`default_nettype wire
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_wr_cmd_fsm.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_wr_cmd_fsm (
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
output wire s_awready ,
input wire s_awvalid ,
output wire m_awvalid ,
input wire m_awready ,
// signal to increment to the next mc transaction
output wire next ,
// signal to the fsm there is another transaction required
input wire next_pending ,
// Write Data portion has completed or Read FIFO has a slot available (not
// full)
output wire b_push ,
input wire b_full ,
output wire a_push
);
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
// States
localparam SM_IDLE = 2'b00;
localparam SM_CMD_EN = 2'b01;
localparam SM_CMD_ACCEPTED = 2'b10;
localparam SM_DONE_WAIT = 2'b11;
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [1:0] state;
// synthesis attribute MAX_FANOUT of state is 20;
reg [1:0] next_state;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
///////////////////////////////////////////////////////////////////////////////
always @(posedge clk) begin
if (reset) begin
state <= SM_IDLE;
end else begin
state <= next_state;
end
end
// Next state transitions.
always @( * )
begin
next_state = state;
case (state)
SM_IDLE:
if (s_awvalid) begin
next_state = SM_CMD_EN;
end else
next_state = state;
SM_CMD_EN:
if (m_awready & next_pending)
next_state = SM_CMD_ACCEPTED;
else if (m_awready & ~next_pending & b_full)
next_state = SM_DONE_WAIT;
else if (m_awready & ~next_pending & ~b_full)
next_state = SM_IDLE;
else
next_state = state;
SM_CMD_ACCEPTED:
next_state = SM_CMD_EN;
SM_DONE_WAIT:
if (!b_full)
next_state = SM_IDLE;
else
next_state = state;
default:
next_state = SM_IDLE;
endcase
end
// Assign outputs based on current state.
assign m_awvalid = (state == SM_CMD_EN);
assign next = ((state == SM_CMD_ACCEPTED)
| (((state == SM_CMD_EN) | (state == SM_DONE_WAIT)) & (next_state == SM_IDLE))) ;
assign a_push = (state == SM_IDLE);
assign s_awready = ((state == SM_CMD_EN) | (state == SM_DONE_WAIT)) & (next_state == SM_IDLE);
assign b_push = ((state == SM_CMD_EN) | (state == SM_DONE_WAIT)) & (next_state == SM_IDLE);
endmodule
`default_nettype wire
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_incr_cmd.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_incr_cmd #
(
///////////////////////////////////////////////////////////////////////////////
// Parameter Definitions
///////////////////////////////////////////////////////////////////////////////
// Width of AxADDR
// Range: 32.
parameter integer C_AXI_ADDR_WIDTH = 32
)
(
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
input wire [C_AXI_ADDR_WIDTH-1:0] axaddr ,
input wire [7:0] axlen ,
input wire [2:0] axsize ,
// axhandshake = axvalid & axready
input wire axhandshake ,
output wire [C_AXI_ADDR_WIDTH-1:0] cmd_byte_addr ,
// Connections to/from fsm module
// signal to increment to the next mc transaction
input wire next ,
// signal to the fsm there is another transaction required
output reg next_pending
);
////////////////////////////////////////////////////////////////////////////////
// Wire and register declarations
////////////////////////////////////////////////////////////////////////////////
reg sel_first;
reg [11:0] axaddr_incr;
reg [8:0] axlen_cnt;
reg next_pending_r;
wire [3:0] axsize_shift;
wire [11:0] axsize_mask;
localparam L_AXI_ADDR_LOW_BIT = (C_AXI_ADDR_WIDTH >= 12) ? 12 : 11;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
////////////////////////////////////////////////////////////////////////////////
// calculate cmd_byte_addr
generate
if (C_AXI_ADDR_WIDTH > 12) begin : ADDR_GT_4K
assign cmd_byte_addr = (sel_first) ? axaddr : {axaddr[C_AXI_ADDR_WIDTH-1:L_AXI_ADDR_LOW_BIT],axaddr_incr[11:0]};
end else begin : ADDR_4K
assign cmd_byte_addr = (sel_first) ? axaddr : axaddr_incr[11:0];
end
endgenerate
assign axsize_shift = (1 << axsize[1:0]);
assign axsize_mask = ~(axsize_shift - 1'b1);
// Incremented version of axaddr
always @(posedge clk) begin
if (sel_first) begin
if(~next) begin
axaddr_incr <= axaddr[11:0] & axsize_mask;
end else begin
axaddr_incr <= (axaddr[11:0] & axsize_mask) + axsize_shift;
end
end else if (next) begin
axaddr_incr <= axaddr_incr + axsize_shift;
end
end
always @(posedge clk) begin
if (axhandshake)begin
axlen_cnt <= axlen;
next_pending_r <= (axlen >= 1);
end else if (next) begin
if (axlen_cnt > 1) begin
axlen_cnt <= axlen_cnt - 1;
next_pending_r <= ((axlen_cnt - 1) >= 1);
end else begin
axlen_cnt <= 9'd0;
next_pending_r <= 1'b0;
end
end
end
always @( * ) begin
if (axhandshake)begin
next_pending = (axlen >= 1);
end else if (next) begin
if (axlen_cnt > 1) begin
next_pending = ((axlen_cnt - 1) >= 1);
end else begin
next_pending = 1'b0;
end
end else begin
next_pending = next_pending_r;
end
end
// last and ignore signals to data channel. These signals are used for
// BL8 to ignore and insert data for even len transactions with offset
// and odd len transactions
// For odd len transactions with no offset the last read is ignored and
// last write is masked
// For odd len transactions with offset the first read is ignored and
// first write is masked
// For even len transactions with offset the last & first read is ignored and
// last& first write is masked
// For even len transactions no ingnores or masks.
// Indicates if we are on the first transaction of a mc translation with more
// than 1 transaction.
always @(posedge clk) begin
if (reset | axhandshake) begin
sel_first <= 1'b1;
end else if (next) begin
sel_first <= 1'b0;
end
end
endmodule
`default_nettype wire
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_incr_cmd.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_incr_cmd #
(
///////////////////////////////////////////////////////////////////////////////
// Parameter Definitions
///////////////////////////////////////////////////////////////////////////////
// Width of AxADDR
// Range: 32.
parameter integer C_AXI_ADDR_WIDTH = 32
)
(
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
input wire [C_AXI_ADDR_WIDTH-1:0] axaddr ,
input wire [7:0] axlen ,
input wire [2:0] axsize ,
// axhandshake = axvalid & axready
input wire axhandshake ,
output wire [C_AXI_ADDR_WIDTH-1:0] cmd_byte_addr ,
// Connections to/from fsm module
// signal to increment to the next mc transaction
input wire next ,
// signal to the fsm there is another transaction required
output reg next_pending
);
////////////////////////////////////////////////////////////////////////////////
// Wire and register declarations
////////////////////////////////////////////////////////////////////////////////
reg sel_first;
reg [11:0] axaddr_incr;
reg [8:0] axlen_cnt;
reg next_pending_r;
wire [3:0] axsize_shift;
wire [11:0] axsize_mask;
localparam L_AXI_ADDR_LOW_BIT = (C_AXI_ADDR_WIDTH >= 12) ? 12 : 11;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
////////////////////////////////////////////////////////////////////////////////
// calculate cmd_byte_addr
generate
if (C_AXI_ADDR_WIDTH > 12) begin : ADDR_GT_4K
assign cmd_byte_addr = (sel_first) ? axaddr : {axaddr[C_AXI_ADDR_WIDTH-1:L_AXI_ADDR_LOW_BIT],axaddr_incr[11:0]};
end else begin : ADDR_4K
assign cmd_byte_addr = (sel_first) ? axaddr : axaddr_incr[11:0];
end
endgenerate
assign axsize_shift = (1 << axsize[1:0]);
assign axsize_mask = ~(axsize_shift - 1'b1);
// Incremented version of axaddr
always @(posedge clk) begin
if (sel_first) begin
if(~next) begin
axaddr_incr <= axaddr[11:0] & axsize_mask;
end else begin
axaddr_incr <= (axaddr[11:0] & axsize_mask) + axsize_shift;
end
end else if (next) begin
axaddr_incr <= axaddr_incr + axsize_shift;
end
end
always @(posedge clk) begin
if (axhandshake)begin
axlen_cnt <= axlen;
next_pending_r <= (axlen >= 1);
end else if (next) begin
if (axlen_cnt > 1) begin
axlen_cnt <= axlen_cnt - 1;
next_pending_r <= ((axlen_cnt - 1) >= 1);
end else begin
axlen_cnt <= 9'd0;
next_pending_r <= 1'b0;
end
end
end
always @( * ) begin
if (axhandshake)begin
next_pending = (axlen >= 1);
end else if (next) begin
if (axlen_cnt > 1) begin
next_pending = ((axlen_cnt - 1) >= 1);
end else begin
next_pending = 1'b0;
end
end else begin
next_pending = next_pending_r;
end
end
// last and ignore signals to data channel. These signals are used for
// BL8 to ignore and insert data for even len transactions with offset
// and odd len transactions
// For odd len transactions with no offset the last read is ignored and
// last write is masked
// For odd len transactions with offset the first read is ignored and
// first write is masked
// For even len transactions with offset the last & first read is ignored and
// last& first write is masked
// For even len transactions no ingnores or masks.
// Indicates if we are on the first transaction of a mc translation with more
// than 1 transaction.
always @(posedge clk) begin
if (reset | axhandshake) begin
sel_first <= 1'b1;
end else if (next) begin
sel_first <= 1'b0;
end
end
endmodule
`default_nettype wire
|
/******************************************************************************
-- (c) Copyright 2006 - 2013 Xilinx, Inc. All rights reserved.
--
-- This file contains confidential and proprietary information
-- of Xilinx, Inc. and is protected under U.S. and
-- international copyright and other intellectual property
-- laws.
--
-- DISCLAIMER
-- This disclaimer is not a license and does not grant any
-- rights to the materials distributed herewith. Except as
-- otherwise provided in a valid license issued to you by
-- Xilinx, and to the maximum extent permitted by applicable
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-- (2) Xilinx shall not be liable (whether in contract or tort,
-- including negligence, or under any other theory of
-- liability) for any loss or damage of any kind or nature
-- related to, arising under or in connection with these
-- materials, including for any direct, or any indirect,
-- special, incidental, or consequential loss or damage
-- (including loss of data, profits, goodwill, or any type of
-- loss or damage suffered as a result of any action brought
-- by a third party) even if such damage or loss was
-- reasonably foreseeable or Xilinx had been advised of the
-- possibility of the same.
--
-- CRITICAL APPLICATIONS
-- Xilinx products are not designed or intended to be fail-
-- safe, or for use in any application requiring fail-safe
-- performance, such as life-support or safety devices or
-- systems, Class III medical devices, nuclear facilities,
-- applications related to the deployment of airbags, or any
-- other applications that could lead to death, personal
-- injury, or severe property or environmental damage
-- (individually and collectively, "Critical
-- Applications"). Customer assumes the sole risk and
-- liability of any use of Xilinx products in Critical
-- Applications, subject only to applicable laws and
-- regulations governing limitations on product liability.
--
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-- PART OF THIS FILE AT ALL TIMES.
--
*****************************************************************************
*
* Filename: BLK_MEM_GEN_v8_2.v
*
* Description:
* This file is the Verilog behvarial model for the
* Block Memory Generator Core.
*
*****************************************************************************
* Author: Xilinx
*
* History: Jan 11, 2006 Initial revision
* Jun 11, 2007 Added independent register stages for
* Port A and Port B (IP1_Jm/v2.5)
* Aug 28, 2007 Added mux pipeline stages feature (IP2_Jm/v2.6)
* Mar 13, 2008 Behavioral model optimizations
* April 07, 2009 : Added support for Spartan-6 and Virtex-6
* features, including the following:
* (i) error injection, detection and/or correction
* (ii) reset priority
* (iii) special reset behavior
*
*****************************************************************************/
`timescale 1ps/1ps
module STATE_LOGIC_v8_2 (O, I0, I1, I2, I3, I4, I5);
parameter INIT = 64'h0000000000000000;
input I0, I1, I2, I3, I4, I5;
output O;
reg O;
reg tmp;
always @( I5 or I4 or I3 or I2 or I1 or I0 ) begin
tmp = I0 ^ I1 ^ I2 ^ I3 ^ I4 ^ I5;
if ( tmp == 0 || tmp == 1)
O = INIT[{I5, I4, I3, I2, I1, I0}];
end
endmodule
module beh_vlog_muxf7_v8_2 (O, I0, I1, S);
output O;
reg O;
input I0, I1, S;
always @(I0 or I1 or S)
if (S)
O = I1;
else
O = I0;
endmodule
module beh_vlog_ff_clr_v8_2 (Q, C, CLR, D);
parameter INIT = 0;
localparam FLOP_DELAY = 100;
output Q;
input C, CLR, D;
reg Q;
initial Q= 1'b0;
always @(posedge C )
if (CLR)
Q<= 1'b0;
else
Q<= #FLOP_DELAY D;
endmodule
module beh_vlog_ff_pre_v8_2 (Q, C, D, PRE);
parameter INIT = 0;
localparam FLOP_DELAY = 100;
output Q;
input C, D, PRE;
reg Q;
initial Q= 1'b0;
always @(posedge C )
if (PRE)
Q <= 1'b1;
else
Q <= #FLOP_DELAY D;
endmodule
module beh_vlog_ff_ce_clr_v8_2 (Q, C, CE, CLR, D);
parameter INIT = 0;
localparam FLOP_DELAY = 100;
output Q;
input C, CE, CLR, D;
reg Q;
initial Q= 1'b0;
always @(posedge C )
if (CLR)
Q <= 1'b0;
else if (CE)
Q <= #FLOP_DELAY D;
endmodule
module write_netlist_v8_2
#(
parameter C_AXI_TYPE = 0
)
(
S_ACLK, S_ARESETN, S_AXI_AWVALID, S_AXI_WVALID, S_AXI_BREADY,
w_last_c, bready_timeout_c, aw_ready_r, S_AXI_WREADY, S_AXI_BVALID,
S_AXI_WR_EN, addr_en_c, incr_addr_c, bvalid_c
);
input S_ACLK;
input S_ARESETN;
input S_AXI_AWVALID;
input S_AXI_WVALID;
input S_AXI_BREADY;
input w_last_c;
input bready_timeout_c;
output aw_ready_r;
output S_AXI_WREADY;
output S_AXI_BVALID;
output S_AXI_WR_EN;
output addr_en_c;
output incr_addr_c;
output bvalid_c;
//-------------------------------------------------------------------------
//AXI LITE
//-------------------------------------------------------------------------
generate if (C_AXI_TYPE == 0 ) begin : gbeh_axi_lite_sm
wire w_ready_r_7;
wire w_ready_c;
wire aw_ready_c;
wire NlwRenamedSignal_bvalid_c;
wire NlwRenamedSignal_incr_addr_c;
wire present_state_FSM_FFd3_13;
wire present_state_FSM_FFd2_14;
wire present_state_FSM_FFd1_15;
wire present_state_FSM_FFd4_16;
wire present_state_FSM_FFd4_In;
wire present_state_FSM_FFd3_In;
wire present_state_FSM_FFd2_In;
wire present_state_FSM_FFd1_In;
wire present_state_FSM_FFd4_In1_21;
wire [0:0] Mmux_aw_ready_c ;
begin
assign
S_AXI_WREADY = w_ready_r_7,
S_AXI_BVALID = NlwRenamedSignal_incr_addr_c,
S_AXI_WR_EN = NlwRenamedSignal_bvalid_c,
incr_addr_c = NlwRenamedSignal_incr_addr_c,
bvalid_c = NlwRenamedSignal_bvalid_c;
assign NlwRenamedSignal_incr_addr_c = 1'b0;
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
aw_ready_r_2 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( aw_ready_c),
.Q ( aw_ready_r)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
w_ready_r (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( w_ready_c),
.Q ( w_ready_r_7)
);
beh_vlog_ff_pre_v8_2 #(
.INIT (1'b1))
present_state_FSM_FFd4 (
.C ( S_ACLK),
.D ( present_state_FSM_FFd4_In),
.PRE ( S_ARESETN),
.Q ( present_state_FSM_FFd4_16)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd3 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd3_In),
.Q ( present_state_FSM_FFd3_13)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd2 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd2_In),
.Q ( present_state_FSM_FFd2_14)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd1 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd1_In),
.Q ( present_state_FSM_FFd1_15)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000055554440))
present_state_FSM_FFd3_In1 (
.I0 ( S_AXI_WVALID),
.I1 ( S_AXI_AWVALID),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( present_state_FSM_FFd4_16),
.I4 ( present_state_FSM_FFd3_13),
.I5 (1'b0),
.O ( present_state_FSM_FFd3_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000088880800))
present_state_FSM_FFd2_In1 (
.I0 ( S_AXI_AWVALID),
.I1 ( S_AXI_WVALID),
.I2 ( bready_timeout_c),
.I3 ( present_state_FSM_FFd2_14),
.I4 ( present_state_FSM_FFd4_16),
.I5 (1'b0),
.O ( present_state_FSM_FFd2_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000AAAA2000))
Mmux_addr_en_c_0_1 (
.I0 ( S_AXI_AWVALID),
.I1 ( bready_timeout_c),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( S_AXI_WVALID),
.I4 ( present_state_FSM_FFd4_16),
.I5 (1'b0),
.O ( addr_en_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hF5F07570F5F05500))
Mmux_w_ready_c_0_1 (
.I0 ( S_AXI_WVALID),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd3_13),
.I4 ( present_state_FSM_FFd4_16),
.I5 ( present_state_FSM_FFd2_14),
.O ( w_ready_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h88808880FFFF8880))
present_state_FSM_FFd1_In1 (
.I0 ( S_AXI_WVALID),
.I1 ( bready_timeout_c),
.I2 ( present_state_FSM_FFd3_13),
.I3 ( present_state_FSM_FFd2_14),
.I4 ( present_state_FSM_FFd1_15),
.I5 ( S_AXI_BREADY),
.O ( present_state_FSM_FFd1_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000A8))
Mmux_S_AXI_WR_EN_0_1 (
.I0 ( S_AXI_WVALID),
.I1 ( present_state_FSM_FFd2_14),
.I2 ( present_state_FSM_FFd3_13),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( NlwRenamedSignal_bvalid_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h2F0F27072F0F2200))
present_state_FSM_FFd4_In1 (
.I0 ( S_AXI_WVALID),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd3_13),
.I4 ( present_state_FSM_FFd4_16),
.I5 ( present_state_FSM_FFd2_14),
.O ( present_state_FSM_FFd4_In1_21)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000F8))
present_state_FSM_FFd4_In2 (
.I0 ( present_state_FSM_FFd1_15),
.I1 ( S_AXI_BREADY),
.I2 ( present_state_FSM_FFd4_In1_21),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( present_state_FSM_FFd4_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h7535753575305500))
Mmux_aw_ready_c_0_1 (
.I0 ( S_AXI_AWVALID),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_WVALID),
.I3 ( present_state_FSM_FFd4_16),
.I4 ( present_state_FSM_FFd3_13),
.I5 ( present_state_FSM_FFd2_14),
.O ( Mmux_aw_ready_c[0])
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000F8))
Mmux_aw_ready_c_0_2 (
.I0 ( present_state_FSM_FFd1_15),
.I1 ( S_AXI_BREADY),
.I2 ( Mmux_aw_ready_c[0]),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( aw_ready_c)
);
end
end
endgenerate
//---------------------------------------------------------------------
// AXI FULL
//---------------------------------------------------------------------
generate if (C_AXI_TYPE == 1 ) begin : gbeh_axi_full_sm
wire w_ready_r_8;
wire w_ready_c;
wire aw_ready_c;
wire NlwRenamedSig_OI_bvalid_c;
wire present_state_FSM_FFd1_16;
wire present_state_FSM_FFd4_17;
wire present_state_FSM_FFd3_18;
wire present_state_FSM_FFd2_19;
wire present_state_FSM_FFd4_In;
wire present_state_FSM_FFd3_In;
wire present_state_FSM_FFd2_In;
wire present_state_FSM_FFd1_In;
wire present_state_FSM_FFd2_In1_24;
wire present_state_FSM_FFd4_In1_25;
wire N2;
wire N4;
begin
assign
S_AXI_WREADY = w_ready_r_8,
bvalid_c = NlwRenamedSig_OI_bvalid_c,
S_AXI_BVALID = 1'b0;
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
aw_ready_r_2
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( aw_ready_c),
.Q ( aw_ready_r)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
w_ready_r
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( w_ready_c),
.Q ( w_ready_r_8)
);
beh_vlog_ff_pre_v8_2 #(
.INIT (1'b1))
present_state_FSM_FFd4
(
.C ( S_ACLK),
.D ( present_state_FSM_FFd4_In),
.PRE ( S_ARESETN),
.Q ( present_state_FSM_FFd4_17)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd3
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd3_In),
.Q ( present_state_FSM_FFd3_18)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd2
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd2_In),
.Q ( present_state_FSM_FFd2_19)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd1
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd1_In),
.Q ( present_state_FSM_FFd1_16)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000005540))
present_state_FSM_FFd3_In1
(
.I0 ( S_AXI_WVALID),
.I1 ( present_state_FSM_FFd4_17),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd3_18),
.I4 (1'b0),
.I5 (1'b0),
.O ( present_state_FSM_FFd3_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hBF3FBB33AF0FAA00))
Mmux_aw_ready_c_0_2
(
.I0 ( S_AXI_BREADY),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd1_16),
.I4 ( present_state_FSM_FFd4_17),
.I5 ( NlwRenamedSig_OI_bvalid_c),
.O ( aw_ready_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hAAAAAAAA20000000))
Mmux_addr_en_c_0_1
(
.I0 ( S_AXI_AWVALID),
.I1 ( bready_timeout_c),
.I2 ( present_state_FSM_FFd2_19),
.I3 ( S_AXI_WVALID),
.I4 ( w_last_c),
.I5 ( present_state_FSM_FFd4_17),
.O ( addr_en_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000A8))
Mmux_S_AXI_WR_EN_0_1
(
.I0 ( S_AXI_WVALID),
.I1 ( present_state_FSM_FFd2_19),
.I2 ( present_state_FSM_FFd3_18),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( S_AXI_WR_EN)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000002220))
Mmux_incr_addr_c_0_1
(
.I0 ( S_AXI_WVALID),
.I1 ( w_last_c),
.I2 ( present_state_FSM_FFd2_19),
.I3 ( present_state_FSM_FFd3_18),
.I4 (1'b0),
.I5 (1'b0),
.O ( incr_addr_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000008880))
Mmux_aw_ready_c_0_11
(
.I0 ( S_AXI_WVALID),
.I1 ( w_last_c),
.I2 ( present_state_FSM_FFd2_19),
.I3 ( present_state_FSM_FFd3_18),
.I4 (1'b0),
.I5 (1'b0),
.O ( NlwRenamedSig_OI_bvalid_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h000000000000D5C0))
present_state_FSM_FFd2_In1
(
.I0 ( w_last_c),
.I1 ( S_AXI_AWVALID),
.I2 ( present_state_FSM_FFd4_17),
.I3 ( present_state_FSM_FFd3_18),
.I4 (1'b0),
.I5 (1'b0),
.O ( present_state_FSM_FFd2_In1_24)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hFFFFAAAA08AAAAAA))
present_state_FSM_FFd2_In2
(
.I0 ( present_state_FSM_FFd2_19),
.I1 ( S_AXI_AWVALID),
.I2 ( bready_timeout_c),
.I3 ( w_last_c),
.I4 ( S_AXI_WVALID),
.I5 ( present_state_FSM_FFd2_In1_24),
.O ( present_state_FSM_FFd2_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00C0004000C00000))
present_state_FSM_FFd4_In1
(
.I0 ( S_AXI_AWVALID),
.I1 ( w_last_c),
.I2 ( S_AXI_WVALID),
.I3 ( bready_timeout_c),
.I4 ( present_state_FSM_FFd3_18),
.I5 ( present_state_FSM_FFd2_19),
.O ( present_state_FSM_FFd4_In1_25)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000FFFF88F8))
present_state_FSM_FFd4_In2
(
.I0 ( present_state_FSM_FFd1_16),
.I1 ( S_AXI_BREADY),
.I2 ( present_state_FSM_FFd4_17),
.I3 ( S_AXI_AWVALID),
.I4 ( present_state_FSM_FFd4_In1_25),
.I5 (1'b0),
.O ( present_state_FSM_FFd4_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000007))
Mmux_w_ready_c_0_SW0
(
.I0 ( w_last_c),
.I1 ( S_AXI_WVALID),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( N2)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hFABAFABAFAAAF000))
Mmux_w_ready_c_0_Q
(
.I0 ( N2),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd4_17),
.I4 ( present_state_FSM_FFd3_18),
.I5 ( present_state_FSM_FFd2_19),
.O ( w_ready_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000008))
Mmux_aw_ready_c_0_11_SW0
(
.I0 ( bready_timeout_c),
.I1 ( S_AXI_WVALID),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( N4)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h88808880FFFF8880))
present_state_FSM_FFd1_In1
(
.I0 ( w_last_c),
.I1 ( N4),
.I2 ( present_state_FSM_FFd2_19),
.I3 ( present_state_FSM_FFd3_18),
.I4 ( present_state_FSM_FFd1_16),
.I5 ( S_AXI_BREADY),
.O ( present_state_FSM_FFd1_In)
);
end
end
endgenerate
endmodule
module read_netlist_v8_2 #(
parameter C_AXI_TYPE = 1,
parameter C_ADDRB_WIDTH = 12
) ( S_AXI_R_LAST_INT, S_ACLK, S_ARESETN, S_AXI_ARVALID,
S_AXI_RREADY,S_AXI_INCR_ADDR,S_AXI_ADDR_EN,
S_AXI_SINGLE_TRANS,S_AXI_MUX_SEL, S_AXI_R_LAST, S_AXI_ARREADY,
S_AXI_RLAST, S_AXI_RVALID, S_AXI_RD_EN, S_AXI_ARLEN);
input S_AXI_R_LAST_INT;
input S_ACLK;
input S_ARESETN;
input S_AXI_ARVALID;
input S_AXI_RREADY;
output S_AXI_INCR_ADDR;
output S_AXI_ADDR_EN;
output S_AXI_SINGLE_TRANS;
output S_AXI_MUX_SEL;
output S_AXI_R_LAST;
output S_AXI_ARREADY;
output S_AXI_RLAST;
output S_AXI_RVALID;
output S_AXI_RD_EN;
input [7:0] S_AXI_ARLEN;
wire present_state_FSM_FFd1_13 ;
wire present_state_FSM_FFd2_14 ;
wire gaxi_full_sm_outstanding_read_r_15 ;
wire gaxi_full_sm_ar_ready_r_16 ;
wire gaxi_full_sm_r_last_r_17 ;
wire NlwRenamedSig_OI_gaxi_full_sm_r_valid_r ;
wire gaxi_full_sm_r_valid_c ;
wire S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o ;
wire gaxi_full_sm_ar_ready_c ;
wire gaxi_full_sm_outstanding_read_c ;
wire NlwRenamedSig_OI_S_AXI_R_LAST ;
wire S_AXI_ARLEN_7_GND_8_o_equal_1_o ;
wire present_state_FSM_FFd2_In ;
wire present_state_FSM_FFd1_In ;
wire Mmux_S_AXI_R_LAST13 ;
wire N01 ;
wire N2 ;
wire Mmux_gaxi_full_sm_ar_ready_c11 ;
wire N4 ;
wire N8 ;
wire N9 ;
wire N10 ;
wire N11 ;
wire N12 ;
wire N13 ;
assign
S_AXI_R_LAST = NlwRenamedSig_OI_S_AXI_R_LAST,
S_AXI_ARREADY = gaxi_full_sm_ar_ready_r_16,
S_AXI_RLAST = gaxi_full_sm_r_last_r_17,
S_AXI_RVALID = NlwRenamedSig_OI_gaxi_full_sm_r_valid_r;
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
gaxi_full_sm_outstanding_read_r (
.C (S_ACLK),
.CLR(S_ARESETN),
.D(gaxi_full_sm_outstanding_read_c),
.Q(gaxi_full_sm_outstanding_read_r_15)
);
beh_vlog_ff_ce_clr_v8_2 #(
.INIT (1'b0))
gaxi_full_sm_r_valid_r (
.C (S_ACLK),
.CE (S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o),
.CLR (S_ARESETN),
.D (gaxi_full_sm_r_valid_c),
.Q (NlwRenamedSig_OI_gaxi_full_sm_r_valid_r)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
gaxi_full_sm_ar_ready_r (
.C (S_ACLK),
.CLR (S_ARESETN),
.D (gaxi_full_sm_ar_ready_c),
.Q (gaxi_full_sm_ar_ready_r_16)
);
beh_vlog_ff_ce_clr_v8_2 #(
.INIT(1'b0))
gaxi_full_sm_r_last_r (
.C (S_ACLK),
.CE (S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o),
.CLR (S_ARESETN),
.D (NlwRenamedSig_OI_S_AXI_R_LAST),
.Q (gaxi_full_sm_r_last_r_17)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd2 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd2_In),
.Q ( present_state_FSM_FFd2_14)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd1 (
.C (S_ACLK),
.CLR (S_ARESETN),
.D (present_state_FSM_FFd1_In),
.Q (present_state_FSM_FFd1_13)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h000000000000000B))
S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o1 (
.I0 ( S_AXI_RREADY),
.I1 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O (S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000008))
Mmux_S_AXI_SINGLE_TRANS11 (
.I0 (S_AXI_ARVALID),
.I1 (S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O (S_AXI_SINGLE_TRANS)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000004))
Mmux_S_AXI_ADDR_EN11 (
.I0 (present_state_FSM_FFd1_13),
.I1 (S_AXI_ARVALID),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O (S_AXI_ADDR_EN)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hECEE2022EEEE2022))
present_state_FSM_FFd2_In1 (
.I0 ( S_AXI_ARVALID),
.I1 ( present_state_FSM_FFd1_13),
.I2 ( S_AXI_RREADY),
.I3 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I4 ( present_state_FSM_FFd2_14),
.I5 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.O ( present_state_FSM_FFd2_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000044440444))
Mmux_S_AXI_R_LAST131 (
.I0 ( present_state_FSM_FFd1_13),
.I1 ( S_AXI_ARVALID),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I4 ( S_AXI_RREADY),
.I5 (1'b0),
.O ( Mmux_S_AXI_R_LAST13)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h4000FFFF40004000))
Mmux_S_AXI_INCR_ADDR11 (
.I0 ( S_AXI_R_LAST_INT),
.I1 ( S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( present_state_FSM_FFd1_13),
.I4 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I5 ( Mmux_S_AXI_R_LAST13),
.O ( S_AXI_INCR_ADDR)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000FE))
S_AXI_ARLEN_7_GND_8_o_equal_1_o_7_SW0 (
.I0 ( S_AXI_ARLEN[2]),
.I1 ( S_AXI_ARLEN[1]),
.I2 ( S_AXI_ARLEN[0]),
.I3 ( 1'b0),
.I4 ( 1'b0),
.I5 ( 1'b0),
.O ( N01)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000001))
S_AXI_ARLEN_7_GND_8_o_equal_1_o_7_Q (
.I0 ( S_AXI_ARLEN[7]),
.I1 ( S_AXI_ARLEN[6]),
.I2 ( S_AXI_ARLEN[5]),
.I3 ( S_AXI_ARLEN[4]),
.I4 ( S_AXI_ARLEN[3]),
.I5 ( N01),
.O ( S_AXI_ARLEN_7_GND_8_o_equal_1_o)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000007))
Mmux_gaxi_full_sm_outstanding_read_c1_SW0 (
.I0 ( S_AXI_ARVALID),
.I1 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I2 ( 1'b0),
.I3 ( 1'b0),
.I4 ( 1'b0),
.I5 ( 1'b0),
.O ( N2)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0020000002200200))
Mmux_gaxi_full_sm_outstanding_read_c1 (
.I0 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I1 ( S_AXI_RREADY),
.I2 ( present_state_FSM_FFd1_13),
.I3 ( present_state_FSM_FFd2_14),
.I4 ( gaxi_full_sm_outstanding_read_r_15),
.I5 ( N2),
.O ( gaxi_full_sm_outstanding_read_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000004555))
Mmux_gaxi_full_sm_ar_ready_c12 (
.I0 ( S_AXI_ARVALID),
.I1 ( S_AXI_RREADY),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I4 ( 1'b0),
.I5 ( 1'b0),
.O ( Mmux_gaxi_full_sm_ar_ready_c11)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000EF))
Mmux_S_AXI_R_LAST11_SW0 (
.I0 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I1 ( S_AXI_RREADY),
.I2 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I3 ( 1'b0),
.I4 ( 1'b0),
.I5 ( 1'b0),
.O ( N4)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hFCAAFC0A00AA000A))
Mmux_S_AXI_R_LAST11 (
.I0 ( S_AXI_ARVALID),
.I1 ( gaxi_full_sm_outstanding_read_r_15),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( present_state_FSM_FFd1_13),
.I4 ( N4),
.I5 ( S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o),
.O ( gaxi_full_sm_r_valid_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000AAAAAA08))
S_AXI_MUX_SEL1 (
.I0 (present_state_FSM_FFd1_13),
.I1 (NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I2 (S_AXI_RREADY),
.I3 (present_state_FSM_FFd2_14),
.I4 (gaxi_full_sm_outstanding_read_r_15),
.I5 (1'b0),
.O (S_AXI_MUX_SEL)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hF3F3F755A2A2A200))
Mmux_S_AXI_RD_EN11 (
.I0 ( present_state_FSM_FFd1_13),
.I1 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I2 ( S_AXI_RREADY),
.I3 ( gaxi_full_sm_outstanding_read_r_15),
.I4 ( present_state_FSM_FFd2_14),
.I5 ( S_AXI_ARVALID),
.O ( S_AXI_RD_EN)
);
beh_vlog_muxf7_v8_2 present_state_FSM_FFd1_In3 (
.I0 ( N8),
.I1 ( N9),
.S ( present_state_FSM_FFd1_13),
.O ( present_state_FSM_FFd1_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h000000005410F4F0))
present_state_FSM_FFd1_In3_F (
.I0 ( S_AXI_RREADY),
.I1 ( present_state_FSM_FFd2_14),
.I2 ( S_AXI_ARVALID),
.I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I4 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I5 ( 1'b0),
.O ( N8)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000072FF7272))
present_state_FSM_FFd1_In3_G (
.I0 ( present_state_FSM_FFd2_14),
.I1 ( S_AXI_R_LAST_INT),
.I2 ( gaxi_full_sm_outstanding_read_r_15),
.I3 ( S_AXI_RREADY),
.I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I5 ( 1'b0),
.O ( N9)
);
beh_vlog_muxf7_v8_2 Mmux_gaxi_full_sm_ar_ready_c14 (
.I0 ( N10),
.I1 ( N11),
.S ( present_state_FSM_FFd1_13),
.O ( gaxi_full_sm_ar_ready_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000FFFF88A8))
Mmux_gaxi_full_sm_ar_ready_c14_F (
.I0 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I1 ( S_AXI_RREADY),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I4 ( Mmux_gaxi_full_sm_ar_ready_c11),
.I5 ( 1'b0),
.O ( N10)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h000000008D008D8D))
Mmux_gaxi_full_sm_ar_ready_c14_G (
.I0 ( present_state_FSM_FFd2_14),
.I1 ( S_AXI_R_LAST_INT),
.I2 ( gaxi_full_sm_outstanding_read_r_15),
.I3 ( S_AXI_RREADY),
.I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I5 ( 1'b0),
.O ( N11)
);
beh_vlog_muxf7_v8_2 Mmux_S_AXI_R_LAST1 (
.I0 ( N12),
.I1 ( N13),
.S ( present_state_FSM_FFd1_13),
.O ( NlwRenamedSig_OI_S_AXI_R_LAST)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000088088888))
Mmux_S_AXI_R_LAST1_F (
.I0 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I1 ( S_AXI_ARVALID),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( S_AXI_RREADY),
.I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I5 ( 1'b0),
.O ( N12)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000E400E4E4))
Mmux_S_AXI_R_LAST1_G (
.I0 ( present_state_FSM_FFd2_14),
.I1 ( gaxi_full_sm_outstanding_read_r_15),
.I2 ( S_AXI_R_LAST_INT),
.I3 ( S_AXI_RREADY),
.I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I5 ( 1'b0),
.O ( N13)
);
endmodule
module blk_mem_axi_write_wrapper_beh_v8_2
# (
// AXI Interface related parameters start here
parameter C_INTERFACE_TYPE = 0, // 0: Native Interface; 1: AXI Interface
parameter C_AXI_TYPE = 0, // 0: AXI Lite; 1: AXI Full;
parameter C_AXI_SLAVE_TYPE = 0, // 0: MEMORY SLAVE; 1: PERIPHERAL SLAVE;
parameter C_MEMORY_TYPE = 0, // 0: SP-RAM, 1: SDP-RAM; 2: TDP-RAM; 3: DP-ROM;
parameter C_WRITE_DEPTH_A = 0,
parameter C_AXI_AWADDR_WIDTH = 32,
parameter C_ADDRA_WIDTH = 12,
parameter C_AXI_WDATA_WIDTH = 32,
parameter C_HAS_AXI_ID = 0,
parameter C_AXI_ID_WIDTH = 4,
// AXI OUTSTANDING WRITES
parameter C_AXI_OS_WR = 2
)
(
// AXI Global Signals
input S_ACLK,
input S_ARESETN,
// AXI Full/Lite Slave Write Channel (write side)
input [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input [C_AXI_AWADDR_WIDTH-1:0] S_AXI_AWADDR,
input [8-1:0] S_AXI_AWLEN,
input [2:0] S_AXI_AWSIZE,
input [1:0] S_AXI_AWBURST,
input S_AXI_AWVALID,
output S_AXI_AWREADY,
input S_AXI_WVALID,
output S_AXI_WREADY,
output reg [C_AXI_ID_WIDTH-1:0] S_AXI_BID = 0,
output S_AXI_BVALID,
input S_AXI_BREADY,
// Signals for BMG interface
output [C_ADDRA_WIDTH-1:0] S_AXI_AWADDR_OUT,
output S_AXI_WR_EN
);
localparam FLOP_DELAY = 100; // 100 ps
localparam C_RANGE = ((C_AXI_WDATA_WIDTH == 8)?0:
((C_AXI_WDATA_WIDTH==16)?1:
((C_AXI_WDATA_WIDTH==32)?2:
((C_AXI_WDATA_WIDTH==64)?3:
((C_AXI_WDATA_WIDTH==128)?4:
((C_AXI_WDATA_WIDTH==256)?5:0))))));
wire bvalid_c ;
reg bready_timeout_c = 0;
wire [1:0] bvalid_rd_cnt_c;
reg bvalid_r = 0;
reg [2:0] bvalid_count_r = 0;
reg [((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?
C_AXI_AWADDR_WIDTH:C_ADDRA_WIDTH)-1:0] awaddr_reg = 0;
reg [1:0] bvalid_wr_cnt_r = 0;
reg [1:0] bvalid_rd_cnt_r = 0;
wire w_last_c ;
wire addr_en_c ;
wire incr_addr_c ;
wire aw_ready_r ;
wire dec_alen_c ;
reg bvalid_d1_c = 0;
reg [7:0] awlen_cntr_r = 0;
reg [7:0] awlen_int = 0;
reg [1:0] awburst_int = 0;
integer total_bytes = 0;
integer wrap_boundary = 0;
integer wrap_base_addr = 0;
integer num_of_bytes_c = 0;
integer num_of_bytes_r = 0;
// Array to store BIDs
reg [C_AXI_ID_WIDTH-1:0] axi_bid_array[3:0] ;
wire S_AXI_BVALID_axi_wr_fsm;
//-------------------------------------
//AXI WRITE FSM COMPONENT INSTANTIATION
//-------------------------------------
write_netlist_v8_2 #(.C_AXI_TYPE(C_AXI_TYPE)) axi_wr_fsm
(
.S_ACLK(S_ACLK),
.S_ARESETN(S_ARESETN),
.S_AXI_AWVALID(S_AXI_AWVALID),
.aw_ready_r(aw_ready_r),
.S_AXI_WVALID(S_AXI_WVALID),
.S_AXI_WREADY(S_AXI_WREADY),
.S_AXI_BREADY(S_AXI_BREADY),
.S_AXI_WR_EN(S_AXI_WR_EN),
.w_last_c(w_last_c),
.bready_timeout_c(bready_timeout_c),
.addr_en_c(addr_en_c),
.incr_addr_c(incr_addr_c),
.bvalid_c(bvalid_c),
.S_AXI_BVALID (S_AXI_BVALID_axi_wr_fsm)
);
//Wrap Address boundary calculation
always@(*) begin
num_of_bytes_c = 2**((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_AWSIZE:0);
total_bytes = (num_of_bytes_r)*(awlen_int+1);
wrap_base_addr = ((awaddr_reg)/((total_bytes==0)?1:total_bytes))*(total_bytes);
wrap_boundary = wrap_base_addr+total_bytes;
end
//-------------------------------------------------------------------------
// BMG address generation
//-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
awaddr_reg <= 0;
num_of_bytes_r <= 0;
awburst_int <= 0;
end else begin
if (addr_en_c == 1'b1) begin
awaddr_reg <= #FLOP_DELAY S_AXI_AWADDR ;
num_of_bytes_r <= num_of_bytes_c;
awburst_int <= ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_AWBURST:2'b01);
end else if (incr_addr_c == 1'b1) begin
if (awburst_int == 2'b10) begin
if(awaddr_reg == (wrap_boundary-num_of_bytes_r)) begin
awaddr_reg <= wrap_base_addr;
end else begin
awaddr_reg <= awaddr_reg + num_of_bytes_r;
end
end else if (awburst_int == 2'b01 || awburst_int == 2'b11) begin
awaddr_reg <= awaddr_reg + num_of_bytes_r;
end
end
end
end
assign S_AXI_AWADDR_OUT = ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?
awaddr_reg[C_AXI_AWADDR_WIDTH-1:C_RANGE]:awaddr_reg);
//-------------------------------------------------------------------------
// AXI wlast generation
//-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
awlen_cntr_r <= 0;
awlen_int <= 0;
end else begin
if (addr_en_c == 1'b1) begin
awlen_int <= #FLOP_DELAY (C_AXI_TYPE == 0?0:S_AXI_AWLEN) ;
awlen_cntr_r <= #FLOP_DELAY (C_AXI_TYPE == 0?0:S_AXI_AWLEN) ;
end else if (dec_alen_c == 1'b1) begin
awlen_cntr_r <= #FLOP_DELAY awlen_cntr_r - 1 ;
end
end
end
assign w_last_c = (awlen_cntr_r == 0 && S_AXI_WVALID == 1'b1)?1'b1:1'b0;
assign dec_alen_c = (incr_addr_c | w_last_c);
//-------------------------------------------------------------------------
// Generation of bvalid counter for outstanding transactions
//-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
bvalid_count_r <= 0;
end else begin
// bvalid_count_r generation
if (bvalid_c == 1'b1 && bvalid_r == 1'b1 && S_AXI_BREADY == 1'b1) begin
bvalid_count_r <= #FLOP_DELAY bvalid_count_r ;
end else if (bvalid_c == 1'b1) begin
bvalid_count_r <= #FLOP_DELAY bvalid_count_r + 1 ;
end else if (bvalid_r == 1'b1 && S_AXI_BREADY == 1'b1 && bvalid_count_r != 0) begin
bvalid_count_r <= #FLOP_DELAY bvalid_count_r - 1 ;
end
end
end
//-------------------------------------------------------------------------
// Generation of bvalid when BID is used
//-------------------------------------------------------------------------
generate if (C_HAS_AXI_ID == 1) begin:gaxi_bvalid_id_r
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
bvalid_r <= 0;
bvalid_d1_c <= 0;
end else begin
// Delay the generation o bvalid_r for generation for BID
bvalid_d1_c <= bvalid_c;
//external bvalid signal generation
if (bvalid_d1_c == 1'b1) begin
bvalid_r <= #FLOP_DELAY 1'b1 ;
end else if (bvalid_count_r <= 1 && S_AXI_BREADY == 1'b1) begin
bvalid_r <= #FLOP_DELAY 0 ;
end
end
end
end
endgenerate
//-------------------------------------------------------------------------
// Generation of bvalid when BID is not used
//-------------------------------------------------------------------------
generate if(C_HAS_AXI_ID == 0) begin:gaxi_bvalid_noid_r
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
bvalid_r <= 0;
end else begin
//external bvalid signal generation
if (bvalid_c == 1'b1) begin
bvalid_r <= #FLOP_DELAY 1'b1 ;
end else if (bvalid_count_r <= 1 && S_AXI_BREADY == 1'b1) begin
bvalid_r <= #FLOP_DELAY 0 ;
end
end
end
end
endgenerate
//-------------------------------------------------------------------------
// Generation of Bready timeout
//-------------------------------------------------------------------------
always @(bvalid_count_r) begin
// bready_timeout_c generation
if(bvalid_count_r == C_AXI_OS_WR-1) begin
bready_timeout_c <= 1'b1;
end else begin
bready_timeout_c <= 1'b0;
end
end
//-------------------------------------------------------------------------
// Generation of BID
//-------------------------------------------------------------------------
generate if(C_HAS_AXI_ID == 1) begin:gaxi_bid_gen
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
bvalid_wr_cnt_r <= 0;
bvalid_rd_cnt_r <= 0;
end else begin
// STORE AWID IN AN ARRAY
if(bvalid_c == 1'b1) begin
bvalid_wr_cnt_r <= bvalid_wr_cnt_r + 1;
end
// generate BID FROM AWID ARRAY
bvalid_rd_cnt_r <= #FLOP_DELAY bvalid_rd_cnt_c ;
S_AXI_BID <= axi_bid_array[bvalid_rd_cnt_c];
end
end
assign bvalid_rd_cnt_c = (bvalid_r == 1'b1 && S_AXI_BREADY == 1'b1)?bvalid_rd_cnt_r+1:bvalid_rd_cnt_r;
//-------------------------------------------------------------------------
// Storing AWID for generation of BID
//-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if(S_ARESETN == 1'b1) begin
axi_bid_array[0] = 0;
axi_bid_array[1] = 0;
axi_bid_array[2] = 0;
axi_bid_array[3] = 0;
end else if(aw_ready_r == 1'b1 && S_AXI_AWVALID == 1'b1) begin
axi_bid_array[bvalid_wr_cnt_r] <= S_AXI_AWID;
end
end
end
endgenerate
assign S_AXI_BVALID = bvalid_r;
assign S_AXI_AWREADY = aw_ready_r;
endmodule
module blk_mem_axi_read_wrapper_beh_v8_2
# (
//// AXI Interface related parameters start here
parameter C_INTERFACE_TYPE = 0,
parameter C_AXI_TYPE = 0,
parameter C_AXI_SLAVE_TYPE = 0,
parameter C_MEMORY_TYPE = 0,
parameter C_WRITE_WIDTH_A = 4,
parameter C_WRITE_DEPTH_A = 32,
parameter C_ADDRA_WIDTH = 12,
parameter C_AXI_PIPELINE_STAGES = 0,
parameter C_AXI_ARADDR_WIDTH = 12,
parameter C_HAS_AXI_ID = 0,
parameter C_AXI_ID_WIDTH = 4,
parameter C_ADDRB_WIDTH = 12
)
(
//// AXI Global Signals
input S_ACLK,
input S_ARESETN,
//// AXI Full/Lite Slave Read (Read side)
input [C_AXI_ARADDR_WIDTH-1:0] S_AXI_ARADDR,
input [7:0] S_AXI_ARLEN,
input [2:0] S_AXI_ARSIZE,
input [1:0] S_AXI_ARBURST,
input S_AXI_ARVALID,
output S_AXI_ARREADY,
output S_AXI_RLAST,
output S_AXI_RVALID,
input S_AXI_RREADY,
input [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
output reg [C_AXI_ID_WIDTH-1:0] S_AXI_RID = 0,
//// AXI Full/Lite Read Address Signals to BRAM
output [C_ADDRB_WIDTH-1:0] S_AXI_ARADDR_OUT,
output S_AXI_RD_EN
);
localparam FLOP_DELAY = 100; // 100 ps
localparam C_RANGE = ((C_WRITE_WIDTH_A == 8)?0:
((C_WRITE_WIDTH_A==16)?1:
((C_WRITE_WIDTH_A==32)?2:
((C_WRITE_WIDTH_A==64)?3:
((C_WRITE_WIDTH_A==128)?4:
((C_WRITE_WIDTH_A==256)?5:0))))));
reg [C_AXI_ID_WIDTH-1:0] ar_id_r=0;
wire addr_en_c;
wire rd_en_c;
wire incr_addr_c;
wire single_trans_c;
wire dec_alen_c;
wire mux_sel_c;
wire r_last_c;
wire r_last_int_c;
wire [C_ADDRB_WIDTH-1 : 0] araddr_out;
reg [7:0] arlen_int_r=0;
reg [7:0] arlen_cntr=8'h01;
reg [1:0] arburst_int_c=0;
reg [1:0] arburst_int_r=0;
reg [((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?
C_AXI_ARADDR_WIDTH:C_ADDRA_WIDTH)-1:0] araddr_reg =0;
integer num_of_bytes_c = 0;
integer total_bytes = 0;
integer num_of_bytes_r = 0;
integer wrap_base_addr_r = 0;
integer wrap_boundary_r = 0;
reg [7:0] arlen_int_c=0;
integer total_bytes_c = 0;
integer wrap_base_addr_c = 0;
integer wrap_boundary_c = 0;
assign dec_alen_c = incr_addr_c | r_last_int_c;
read_netlist_v8_2
#(.C_AXI_TYPE (1),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH))
axi_read_fsm (
.S_AXI_INCR_ADDR(incr_addr_c),
.S_AXI_ADDR_EN(addr_en_c),
.S_AXI_SINGLE_TRANS(single_trans_c),
.S_AXI_MUX_SEL(mux_sel_c),
.S_AXI_R_LAST(r_last_c),
.S_AXI_R_LAST_INT(r_last_int_c),
//// AXI Global Signals
.S_ACLK(S_ACLK),
.S_ARESETN(S_ARESETN),
//// AXI Full/Lite Slave Read (Read side)
.S_AXI_ARLEN(S_AXI_ARLEN),
.S_AXI_ARVALID(S_AXI_ARVALID),
.S_AXI_ARREADY(S_AXI_ARREADY),
.S_AXI_RLAST(S_AXI_RLAST),
.S_AXI_RVALID(S_AXI_RVALID),
.S_AXI_RREADY(S_AXI_RREADY),
//// AXI Full/Lite Read Address Signals to BRAM
.S_AXI_RD_EN(rd_en_c)
);
always@(*) begin
num_of_bytes_c = 2**((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_ARSIZE:0);
total_bytes = (num_of_bytes_r)*(arlen_int_r+1);
wrap_base_addr_r = ((araddr_reg)/(total_bytes==0?1:total_bytes))*(total_bytes);
wrap_boundary_r = wrap_base_addr_r+total_bytes;
//////// combinatorial from interface
arlen_int_c = (C_AXI_TYPE == 0?0:S_AXI_ARLEN);
total_bytes_c = (num_of_bytes_c)*(arlen_int_c+1);
wrap_base_addr_c = ((S_AXI_ARADDR)/(total_bytes_c==0?1:total_bytes_c))*(total_bytes_c);
wrap_boundary_c = wrap_base_addr_c+total_bytes_c;
arburst_int_c = ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_ARBURST:1);
end
////-------------------------------------------------------------------------
//// BMG address generation
////-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
araddr_reg <= 0;
arburst_int_r <= 0;
num_of_bytes_r <= 0;
end else begin
if (incr_addr_c == 1'b1 && addr_en_c == 1'b1 && single_trans_c == 1'b0) begin
arburst_int_r <= arburst_int_c;
num_of_bytes_r <= num_of_bytes_c;
if (arburst_int_c == 2'b10) begin
if(S_AXI_ARADDR == (wrap_boundary_c-num_of_bytes_c)) begin
araddr_reg <= wrap_base_addr_c;
end else begin
araddr_reg <= S_AXI_ARADDR + num_of_bytes_c;
end
end else if (arburst_int_c == 2'b01 || arburst_int_c == 2'b11) begin
araddr_reg <= S_AXI_ARADDR + num_of_bytes_c;
end
end else if (addr_en_c == 1'b1) begin
araddr_reg <= S_AXI_ARADDR;
num_of_bytes_r <= num_of_bytes_c;
arburst_int_r <= arburst_int_c;
end else if (incr_addr_c == 1'b1) begin
if (arburst_int_r == 2'b10) begin
if(araddr_reg == (wrap_boundary_r-num_of_bytes_r)) begin
araddr_reg <= wrap_base_addr_r;
end else begin
araddr_reg <= araddr_reg + num_of_bytes_r;
end
end else if (arburst_int_r == 2'b01 || arburst_int_r == 2'b11) begin
araddr_reg <= araddr_reg + num_of_bytes_r;
end
end
end
end
assign araddr_out = ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?araddr_reg[C_AXI_ARADDR_WIDTH-1:C_RANGE]:araddr_reg);
////-----------------------------------------------------------------------
//// Counter to generate r_last_int_c from registered ARLEN - AXI FULL FSM
////-----------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
arlen_cntr <= 8'h01;
arlen_int_r <= 0;
end else begin
if (addr_en_c == 1'b1 && dec_alen_c == 1'b1 && single_trans_c == 1'b0) begin
arlen_int_r <= (C_AXI_TYPE == 0?0:S_AXI_ARLEN) ;
arlen_cntr <= S_AXI_ARLEN - 1'b1;
end else if (addr_en_c == 1'b1) begin
arlen_int_r <= (C_AXI_TYPE == 0?0:S_AXI_ARLEN) ;
arlen_cntr <= (C_AXI_TYPE == 0?0:S_AXI_ARLEN) ;
end else if (dec_alen_c == 1'b1) begin
arlen_cntr <= arlen_cntr - 1'b1 ;
end
else begin
arlen_cntr <= arlen_cntr;
end
end
end
assign r_last_int_c = (arlen_cntr == 0 && S_AXI_RREADY == 1'b1)?1'b1:1'b0;
////------------------------------------------------------------------------
//// AXI FULL FSM
//// Mux Selection of ARADDR
//// ARADDR is driven out from the read fsm based on the mux_sel_c
//// Based on mux_sel either ARADDR is given out or the latched ARADDR is
//// given out to BRAM
////------------------------------------------------------------------------
assign S_AXI_ARADDR_OUT = (mux_sel_c == 1'b0)?((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_ARADDR[C_AXI_ARADDR_WIDTH-1:C_RANGE]:S_AXI_ARADDR):araddr_out;
////------------------------------------------------------------------------
//// Assign output signals - AXI FULL FSM
////------------------------------------------------------------------------
assign S_AXI_RD_EN = rd_en_c;
generate if (C_HAS_AXI_ID == 1) begin:gaxi_bvalid_id_r
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
S_AXI_RID <= 0;
ar_id_r <= 0;
end else begin
if (addr_en_c == 1'b1 && rd_en_c == 1'b1) begin
S_AXI_RID <= S_AXI_ARID;
ar_id_r <= S_AXI_ARID;
end else if (addr_en_c == 1'b1 && rd_en_c == 1'b0) begin
ar_id_r <= S_AXI_ARID;
end else if (rd_en_c == 1'b1) begin
S_AXI_RID <= ar_id_r;
end
end
end
end
endgenerate
endmodule
module blk_mem_axi_regs_fwd_v8_2
#(parameter C_DATA_WIDTH = 8
)(
input ACLK,
input ARESET,
input S_VALID,
output S_READY,
input [C_DATA_WIDTH-1:0] S_PAYLOAD_DATA,
output M_VALID,
input M_READY,
output reg [C_DATA_WIDTH-1:0] M_PAYLOAD_DATA
);
reg [C_DATA_WIDTH-1:0] STORAGE_DATA;
wire S_READY_I;
reg M_VALID_I;
reg [1:0] ARESET_D;
//assign local signal to its output signal
assign S_READY = S_READY_I;
assign M_VALID = M_VALID_I;
always @(posedge ACLK) begin
ARESET_D <= {ARESET_D[0], ARESET};
end
//Save payload data whenever we have a transaction on the slave side
always @(posedge ACLK or ARESET) begin
if (ARESET == 1'b1) begin
STORAGE_DATA <= 0;
end else begin
if(S_VALID == 1'b1 && S_READY_I == 1'b1 ) begin
STORAGE_DATA <= S_PAYLOAD_DATA;
end
end
end
always @(posedge ACLK) begin
M_PAYLOAD_DATA = STORAGE_DATA;
end
//M_Valid set to high when we have a completed transfer on slave side
//Is removed on a M_READY except if we have a new transfer on the slave side
always @(posedge ACLK or ARESET_D) begin
if (ARESET_D != 2'b00) begin
M_VALID_I <= 1'b0;
end else begin
if (S_VALID == 1'b1) begin
//Always set M_VALID_I when slave side is valid
M_VALID_I <= 1'b1;
end else if (M_READY == 1'b1 ) begin
//Clear (or keep) when no slave side is valid but master side is ready
M_VALID_I <= 1'b0;
end
end
end
//Slave Ready is either when Master side drives M_READY or we have space in our storage data
assign S_READY_I = (M_READY || (!M_VALID_I)) && !(|(ARESET_D));
endmodule
//*****************************************************************************
// Output Register Stage module
//
// This module builds the output register stages of the memory. This module is
// instantiated in the main memory module (BLK_MEM_GEN_v8_2) which is
// declared/implemented further down in this file.
//*****************************************************************************
module BLK_MEM_GEN_v8_2_output_stage
#(parameter C_FAMILY = "virtex7",
parameter C_XDEVICEFAMILY = "virtex7",
parameter C_RST_TYPE = "SYNC",
parameter C_HAS_RST = 0,
parameter C_RSTRAM = 0,
parameter C_RST_PRIORITY = "CE",
parameter C_INIT_VAL = "0",
parameter C_HAS_EN = 0,
parameter C_HAS_REGCE = 0,
parameter C_DATA_WIDTH = 32,
parameter C_ADDRB_WIDTH = 10,
parameter C_HAS_MEM_OUTPUT_REGS = 0,
parameter C_USE_SOFTECC = 0,
parameter C_USE_ECC = 0,
parameter NUM_STAGES = 1,
parameter C_EN_ECC_PIPE = 0,
parameter FLOP_DELAY = 100
)
(
input CLK,
input RST,
input EN,
input REGCE,
input [C_DATA_WIDTH-1:0] DIN_I,
output reg [C_DATA_WIDTH-1:0] DOUT,
input SBITERR_IN_I,
input DBITERR_IN_I,
output reg SBITERR,
output reg DBITERR,
input [C_ADDRB_WIDTH-1:0] RDADDRECC_IN_I,
input ECCPIPECE,
output reg [C_ADDRB_WIDTH-1:0] RDADDRECC
);
//******************************
// Port and Generic Definitions
//******************************
//////////////////////////////////////////////////////////////////////////
// Generic Definitions
//////////////////////////////////////////////////////////////////////////
// C_FAMILY,C_XDEVICEFAMILY: Designates architecture targeted. The following
// options are available - "spartan3", "spartan6",
// "virtex4", "virtex5", "virtex6" and "virtex6l".
// C_RST_TYPE : Type of reset - Synchronous or Asynchronous
// C_HAS_RST : Determines the presence of the RST port
// C_RSTRAM : Determines if special reset behavior is used
// C_RST_PRIORITY : Determines the priority between CE and SR
// C_INIT_VAL : Initialization value
// C_HAS_EN : Determines the presence of the EN port
// C_HAS_REGCE : Determines the presence of the REGCE port
// C_DATA_WIDTH : Memory write/read width
// C_ADDRB_WIDTH : Width of the ADDRB input port
// C_HAS_MEM_OUTPUT_REGS : Designates the use of a register at the output
// of the RAM primitive
// C_USE_SOFTECC : Determines if the Soft ECC feature is used or
// not. Only applicable Spartan-6
// C_USE_ECC : Determines if the ECC feature is used or
// not. Only applicable for V5 and V6
// NUM_STAGES : Determines the number of output stages
// FLOP_DELAY : Constant delay for register assignments
//////////////////////////////////////////////////////////////////////////
// Port Definitions
//////////////////////////////////////////////////////////////////////////
// CLK : Clock to synchronize all read and write operations
// RST : Reset input to reset memory outputs to a user-defined
// reset state
// EN : Enable all read and write operations
// REGCE : Register Clock Enable to control each pipeline output
// register stages
// DIN : Data input to the Output stage.
// DOUT : Final Data output
// SBITERR_IN : SBITERR input signal to the Output stage.
// SBITERR : Final SBITERR Output signal.
// DBITERR_IN : DBITERR input signal to the Output stage.
// DBITERR : Final DBITERR Output signal.
// RDADDRECC_IN : RDADDRECC input signal to the Output stage.
// RDADDRECC : Final RDADDRECC Output signal.
//////////////////////////////////////////////////////////////////////////
// Fix for CR-509792
localparam REG_STAGES = (NUM_STAGES < 2) ? 1 : NUM_STAGES-1;
// Declare the pipeline registers
// (includes mem output reg, mux pipeline stages, and mux output reg)
reg [C_DATA_WIDTH*REG_STAGES-1:0] out_regs;
reg [C_ADDRB_WIDTH*REG_STAGES-1:0] rdaddrecc_regs;
reg [REG_STAGES-1:0] sbiterr_regs;
reg [REG_STAGES-1:0] dbiterr_regs;
reg [C_DATA_WIDTH*8-1:0] init_str = C_INIT_VAL;
reg [C_DATA_WIDTH-1:0] init_val ;
//*********************************************
// Wire off optional inputs based on parameters
//*********************************************
wire en_i;
wire regce_i;
wire rst_i;
// Internal signals
reg [C_DATA_WIDTH-1:0] DIN;
reg [C_ADDRB_WIDTH-1:0] RDADDRECC_IN;
reg SBITERR_IN;
reg DBITERR_IN;
// Internal enable for output registers is tied to user EN or '1' depending
// on parameters
assign en_i = (C_HAS_EN==0 || EN);
// Internal register enable for output registers is tied to user REGCE, EN or
// '1' depending on parameters
// For V4 ECC, REGCE is always 1
// Virtex-4 ECC Not Yet Supported
assign regce_i = ((C_HAS_REGCE==1) && REGCE) ||
((C_HAS_REGCE==0) && (C_HAS_EN==0 || EN));
//Internal SRR is tied to user RST or '0' depending on parameters
assign rst_i = (C_HAS_RST==1) && RST;
//****************************************************
// Power on: load up the output registers and latches
//****************************************************
initial begin
if (!($sscanf(init_str, "%h", init_val))) begin
init_val = 0;
end
DOUT = init_val;
RDADDRECC = 0;
SBITERR = 1'b0;
DBITERR = 1'b0;
DIN = {(C_DATA_WIDTH){1'b0}};
RDADDRECC_IN = 0;
SBITERR_IN = 0;
DBITERR_IN = 0;
// This will be one wider than need, but 0 is an error
out_regs = {(REG_STAGES+1){init_val}};
rdaddrecc_regs = 0;
sbiterr_regs = {(REG_STAGES+1){1'b0}};
dbiterr_regs = {(REG_STAGES+1){1'b0}};
end
//***********************************************
// NUM_STAGES = 0 (No output registers. RAM only)
//***********************************************
generate if (NUM_STAGES == 0) begin : zero_stages
always @* begin
DOUT = DIN;
RDADDRECC = RDADDRECC_IN;
SBITERR = SBITERR_IN;
DBITERR = DBITERR_IN;
end
end
endgenerate
generate if (C_EN_ECC_PIPE == 0) begin : no_ecc_pipe_reg
always @* begin
DIN = DIN_I;
SBITERR_IN = SBITERR_IN_I;
DBITERR_IN = DBITERR_IN_I;
RDADDRECC_IN = RDADDRECC_IN_I;
end
end
endgenerate
generate if (C_EN_ECC_PIPE == 1) begin : with_ecc_pipe_reg
always @(posedge CLK) begin
if(ECCPIPECE == 1) begin
DIN <= #FLOP_DELAY DIN_I;
SBITERR_IN <= #FLOP_DELAY SBITERR_IN_I;
DBITERR_IN <= #FLOP_DELAY DBITERR_IN_I;
RDADDRECC_IN <= #FLOP_DELAY RDADDRECC_IN_I;
end
end
end
endgenerate
//***********************************************
// NUM_STAGES = 1
// (Mem Output Reg only or Mux Output Reg only)
//***********************************************
// Possible valid combinations:
// Note: C_HAS_MUX_OUTPUT_REGS_*=0 when (C_RSTRAM_*=1)
// +-----------------------------------------+
// | C_RSTRAM_* | Reset Behavior |
// +----------------+------------------------+
// | 0 | Normal Behavior |
// +----------------+------------------------+
// | 1 | Special Behavior |
// +----------------+------------------------+
//
// Normal = REGCE gates reset, as in the case of all families except S3ADSP.
// Special = EN gates reset, as in the case of S3ADSP.
generate if (NUM_STAGES == 1 &&
(C_RSTRAM == 0 || (C_RSTRAM == 1 && (C_XDEVICEFAMILY != "spartan3adsp" && C_XDEVICEFAMILY != "aspartan3adsp" )) ||
C_HAS_MEM_OUTPUT_REGS == 0 || C_HAS_RST == 0))
begin : one_stages_norm
always @(posedge CLK) begin
if (C_RST_PRIORITY == "CE") begin //REGCE has priority
if (regce_i && rst_i) begin
DOUT <= #FLOP_DELAY init_val;
RDADDRECC <= #FLOP_DELAY 0;
SBITERR <= #FLOP_DELAY 1'b0;
DBITERR <= #FLOP_DELAY 1'b0;
end else if (regce_i) begin
DOUT <= #FLOP_DELAY DIN;
RDADDRECC <= #FLOP_DELAY RDADDRECC_IN;
SBITERR <= #FLOP_DELAY SBITERR_IN;
DBITERR <= #FLOP_DELAY DBITERR_IN;
end //Output signal assignments
end else begin //RST has priority
if (rst_i) begin
DOUT <= #FLOP_DELAY init_val;
RDADDRECC <= #FLOP_DELAY RDADDRECC_IN;
SBITERR <= #FLOP_DELAY 1'b0;
DBITERR <= #FLOP_DELAY 1'b0;
end else if (regce_i) begin
DOUT <= #FLOP_DELAY DIN;
RDADDRECC <= #FLOP_DELAY RDADDRECC_IN;
SBITERR <= #FLOP_DELAY SBITERR_IN;
DBITERR <= #FLOP_DELAY DBITERR_IN;
end //Output signal assignments
end //end Priority conditions
end //end RST Type conditions
end //end one_stages_norm generate statement
endgenerate
// Special Reset Behavior for S3ADSP
generate if (NUM_STAGES == 1 && C_RSTRAM == 1 && (C_XDEVICEFAMILY =="spartan3adsp" || C_XDEVICEFAMILY =="aspartan3adsp"))
begin : one_stage_splbhv
always @(posedge CLK) begin
if (en_i && rst_i) begin
DOUT <= #FLOP_DELAY init_val;
end else if (regce_i && !rst_i) begin
DOUT <= #FLOP_DELAY DIN;
end //Output signal assignments
end //end CLK
end //end one_stage_splbhv generate statement
endgenerate
//************************************************************
// NUM_STAGES > 1
// Mem Output Reg + Mux Output Reg
// or
// Mem Output Reg + Mux Pipeline Stages (>0) + Mux Output Reg
// or
// Mux Pipeline Stages (>0) + Mux Output Reg
//*************************************************************
generate if (NUM_STAGES > 1) begin : multi_stage
//Asynchronous Reset
always @(posedge CLK) begin
if (C_RST_PRIORITY == "CE") begin //REGCE has priority
if (regce_i && rst_i) begin
DOUT <= #FLOP_DELAY init_val;
RDADDRECC <= #FLOP_DELAY 0;
SBITERR <= #FLOP_DELAY 1'b0;
DBITERR <= #FLOP_DELAY 1'b0;
end else if (regce_i) begin
DOUT <= #FLOP_DELAY
out_regs[C_DATA_WIDTH*(NUM_STAGES-2)+:C_DATA_WIDTH];
RDADDRECC <= #FLOP_DELAY rdaddrecc_regs[C_ADDRB_WIDTH*(NUM_STAGES-2)+:C_ADDRB_WIDTH];
SBITERR <= #FLOP_DELAY sbiterr_regs[NUM_STAGES-2];
DBITERR <= #FLOP_DELAY dbiterr_regs[NUM_STAGES-2];
end //Output signal assignments
end else begin //RST has priority
if (rst_i) begin
DOUT <= #FLOP_DELAY init_val;
RDADDRECC <= #FLOP_DELAY 0;
SBITERR <= #FLOP_DELAY 1'b0;
DBITERR <= #FLOP_DELAY 1'b0;
end else if (regce_i) begin
DOUT <= #FLOP_DELAY
out_regs[C_DATA_WIDTH*(NUM_STAGES-2)+:C_DATA_WIDTH];
RDADDRECC <= #FLOP_DELAY rdaddrecc_regs[C_ADDRB_WIDTH*(NUM_STAGES-2)+:C_ADDRB_WIDTH];
SBITERR <= #FLOP_DELAY sbiterr_regs[NUM_STAGES-2];
DBITERR <= #FLOP_DELAY dbiterr_regs[NUM_STAGES-2];
end //Output signal assignments
end //end Priority conditions
// Shift the data through the output stages
if (en_i) begin
out_regs <= #FLOP_DELAY (out_regs << C_DATA_WIDTH) | DIN;
rdaddrecc_regs <= #FLOP_DELAY (rdaddrecc_regs << C_ADDRB_WIDTH) | RDADDRECC_IN;
sbiterr_regs <= #FLOP_DELAY (sbiterr_regs << 1) | SBITERR_IN;
dbiterr_regs <= #FLOP_DELAY (dbiterr_regs << 1) | DBITERR_IN;
end
end //end CLK
end //end multi_stage generate statement
endgenerate
endmodule
module BLK_MEM_GEN_v8_2_softecc_output_reg_stage
#(parameter C_DATA_WIDTH = 32,
parameter C_ADDRB_WIDTH = 10,
parameter C_HAS_SOFTECC_OUTPUT_REGS_B= 0,
parameter C_USE_SOFTECC = 0,
parameter FLOP_DELAY = 100
)
(
input CLK,
input [C_DATA_WIDTH-1:0] DIN,
output reg [C_DATA_WIDTH-1:0] DOUT,
input SBITERR_IN,
input DBITERR_IN,
output reg SBITERR,
output reg DBITERR,
input [C_ADDRB_WIDTH-1:0] RDADDRECC_IN,
output reg [C_ADDRB_WIDTH-1:0] RDADDRECC
);
//******************************
// Port and Generic Definitions
//******************************
//////////////////////////////////////////////////////////////////////////
// Generic Definitions
//////////////////////////////////////////////////////////////////////////
// C_DATA_WIDTH : Memory write/read width
// C_ADDRB_WIDTH : Width of the ADDRB input port
// C_HAS_SOFTECC_OUTPUT_REGS_B : Designates the use of a register at the output
// of the RAM primitive
// C_USE_SOFTECC : Determines if the Soft ECC feature is used or
// not. Only applicable Spartan-6
// FLOP_DELAY : Constant delay for register assignments
//////////////////////////////////////////////////////////////////////////
// Port Definitions
//////////////////////////////////////////////////////////////////////////
// CLK : Clock to synchronize all read and write operations
// DIN : Data input to the Output stage.
// DOUT : Final Data output
// SBITERR_IN : SBITERR input signal to the Output stage.
// SBITERR : Final SBITERR Output signal.
// DBITERR_IN : DBITERR input signal to the Output stage.
// DBITERR : Final DBITERR Output signal.
// RDADDRECC_IN : RDADDRECC input signal to the Output stage.
// RDADDRECC : Final RDADDRECC Output signal.
//////////////////////////////////////////////////////////////////////////
reg [C_DATA_WIDTH-1:0] dout_i = 0;
reg sbiterr_i = 0;
reg dbiterr_i = 0;
reg [C_ADDRB_WIDTH-1:0] rdaddrecc_i = 0;
//***********************************************
// NO OUTPUT REGISTERS.
//***********************************************
generate if (C_HAS_SOFTECC_OUTPUT_REGS_B==0) begin : no_output_stage
always @* begin
DOUT = DIN;
RDADDRECC = RDADDRECC_IN;
SBITERR = SBITERR_IN;
DBITERR = DBITERR_IN;
end
end
endgenerate
//***********************************************
// WITH OUTPUT REGISTERS.
//***********************************************
generate if (C_HAS_SOFTECC_OUTPUT_REGS_B==1) begin : has_output_stage
always @(posedge CLK) begin
dout_i <= #FLOP_DELAY DIN;
rdaddrecc_i <= #FLOP_DELAY RDADDRECC_IN;
sbiterr_i <= #FLOP_DELAY SBITERR_IN;
dbiterr_i <= #FLOP_DELAY DBITERR_IN;
end
always @* begin
DOUT = dout_i;
RDADDRECC = rdaddrecc_i;
SBITERR = sbiterr_i;
DBITERR = dbiterr_i;
end //end always
end //end in_or_out_stage generate statement
endgenerate
endmodule
//*****************************************************************************
// Main Memory module
//
// This module is the top-level behavioral model and this implements the RAM
//*****************************************************************************
module BLK_MEM_GEN_v8_2_mem_module
#(parameter C_CORENAME = "blk_mem_gen_v8_2",
parameter C_FAMILY = "virtex7",
parameter C_XDEVICEFAMILY = "virtex7",
parameter C_MEM_TYPE = 2,
parameter C_BYTE_SIZE = 9,
parameter C_USE_BRAM_BLOCK = 0,
parameter C_ALGORITHM = 1,
parameter C_PRIM_TYPE = 3,
parameter C_LOAD_INIT_FILE = 0,
parameter C_INIT_FILE_NAME = "",
parameter C_INIT_FILE = "",
parameter C_USE_DEFAULT_DATA = 0,
parameter C_DEFAULT_DATA = "0",
parameter C_RST_TYPE = "SYNC",
parameter C_HAS_RSTA = 0,
parameter C_RST_PRIORITY_A = "CE",
parameter C_RSTRAM_A = 0,
parameter C_INITA_VAL = "0",
parameter C_HAS_ENA = 1,
parameter C_HAS_REGCEA = 0,
parameter C_USE_BYTE_WEA = 0,
parameter C_WEA_WIDTH = 1,
parameter C_WRITE_MODE_A = "WRITE_FIRST",
parameter C_WRITE_WIDTH_A = 32,
parameter C_READ_WIDTH_A = 32,
parameter C_WRITE_DEPTH_A = 64,
parameter C_READ_DEPTH_A = 64,
parameter C_ADDRA_WIDTH = 5,
parameter C_HAS_RSTB = 0,
parameter C_RST_PRIORITY_B = "CE",
parameter C_RSTRAM_B = 0,
parameter C_INITB_VAL = "",
parameter C_HAS_ENB = 1,
parameter C_HAS_REGCEB = 0,
parameter C_USE_BYTE_WEB = 0,
parameter C_WEB_WIDTH = 1,
parameter C_WRITE_MODE_B = "WRITE_FIRST",
parameter C_WRITE_WIDTH_B = 32,
parameter C_READ_WIDTH_B = 32,
parameter C_WRITE_DEPTH_B = 64,
parameter C_READ_DEPTH_B = 64,
parameter C_ADDRB_WIDTH = 5,
parameter C_HAS_MEM_OUTPUT_REGS_A = 0,
parameter C_HAS_MEM_OUTPUT_REGS_B = 0,
parameter C_HAS_MUX_OUTPUT_REGS_A = 0,
parameter C_HAS_MUX_OUTPUT_REGS_B = 0,
parameter C_HAS_SOFTECC_INPUT_REGS_A = 0,
parameter C_HAS_SOFTECC_OUTPUT_REGS_B= 0,
parameter C_MUX_PIPELINE_STAGES = 0,
parameter C_USE_SOFTECC = 0,
parameter C_USE_ECC = 0,
parameter C_HAS_INJECTERR = 0,
parameter C_SIM_COLLISION_CHECK = "NONE",
parameter C_COMMON_CLK = 1,
parameter FLOP_DELAY = 100,
parameter C_DISABLE_WARN_BHV_COLL = 0,
parameter C_EN_ECC_PIPE = 0,
parameter C_DISABLE_WARN_BHV_RANGE = 0
)
(input CLKA,
input RSTA,
input ENA,
input REGCEA,
input [C_WEA_WIDTH-1:0] WEA,
input [C_ADDRA_WIDTH-1:0] ADDRA,
input [C_WRITE_WIDTH_A-1:0] DINA,
output [C_READ_WIDTH_A-1:0] DOUTA,
input CLKB,
input RSTB,
input ENB,
input REGCEB,
input [C_WEB_WIDTH-1:0] WEB,
input [C_ADDRB_WIDTH-1:0] ADDRB,
input [C_WRITE_WIDTH_B-1:0] DINB,
output [C_READ_WIDTH_B-1:0] DOUTB,
input INJECTSBITERR,
input INJECTDBITERR,
input ECCPIPECE,
input SLEEP,
output SBITERR,
output DBITERR,
output [C_ADDRB_WIDTH-1:0] RDADDRECC
);
//******************************
// Port and Generic Definitions
//******************************
//////////////////////////////////////////////////////////////////////////
// Generic Definitions
//////////////////////////////////////////////////////////////////////////
// C_CORENAME : Instance name of the Block Memory Generator core
// C_FAMILY,C_XDEVICEFAMILY: Designates architecture targeted. The following
// options are available - "spartan3", "spartan6",
// "virtex4", "virtex5", "virtex6" and "virtex6l".
// C_MEM_TYPE : Designates memory type.
// It can be
// 0 - Single Port Memory
// 1 - Simple Dual Port Memory
// 2 - True Dual Port Memory
// 3 - Single Port Read Only Memory
// 4 - Dual Port Read Only Memory
// C_BYTE_SIZE : Size of a byte (8 or 9 bits)
// C_ALGORITHM : Designates the algorithm method used
// for constructing the memory.
// It can be Fixed_Primitives, Minimum_Area or
// Low_Power
// C_PRIM_TYPE : Designates the user selected primitive used to
// construct the memory.
//
// C_LOAD_INIT_FILE : Designates the use of an initialization file to
// initialize memory contents.
// C_INIT_FILE_NAME : Memory initialization file name.
// C_USE_DEFAULT_DATA : Designates whether to fill remaining
// initialization space with default data
// C_DEFAULT_DATA : Default value of all memory locations
// not initialized by the memory
// initialization file.
// C_RST_TYPE : Type of reset - Synchronous or Asynchronous
// C_HAS_RSTA : Determines the presence of the RSTA port
// C_RST_PRIORITY_A : Determines the priority between CE and SR for
// Port A.
// C_RSTRAM_A : Determines if special reset behavior is used for
// Port A
// C_INITA_VAL : The initialization value for Port A
// C_HAS_ENA : Determines the presence of the ENA port
// C_HAS_REGCEA : Determines the presence of the REGCEA port
// C_USE_BYTE_WEA : Determines if the Byte Write is used or not.
// C_WEA_WIDTH : The width of the WEA port
// C_WRITE_MODE_A : Configurable write mode for Port A. It can be
// WRITE_FIRST, READ_FIRST or NO_CHANGE.
// C_WRITE_WIDTH_A : Memory write width for Port A.
// C_READ_WIDTH_A : Memory read width for Port A.
// C_WRITE_DEPTH_A : Memory write depth for Port A.
// C_READ_DEPTH_A : Memory read depth for Port A.
// C_ADDRA_WIDTH : Width of the ADDRA input port
// C_HAS_RSTB : Determines the presence of the RSTB port
// C_RST_PRIORITY_B : Determines the priority between CE and SR for
// Port B.
// C_RSTRAM_B : Determines if special reset behavior is used for
// Port B
// C_INITB_VAL : The initialization value for Port B
// C_HAS_ENB : Determines the presence of the ENB port
// C_HAS_REGCEB : Determines the presence of the REGCEB port
// C_USE_BYTE_WEB : Determines if the Byte Write is used or not.
// C_WEB_WIDTH : The width of the WEB port
// C_WRITE_MODE_B : Configurable write mode for Port B. It can be
// WRITE_FIRST, READ_FIRST or NO_CHANGE.
// C_WRITE_WIDTH_B : Memory write width for Port B.
// C_READ_WIDTH_B : Memory read width for Port B.
// C_WRITE_DEPTH_B : Memory write depth for Port B.
// C_READ_DEPTH_B : Memory read depth for Port B.
// C_ADDRB_WIDTH : Width of the ADDRB input port
// C_HAS_MEM_OUTPUT_REGS_A : Designates the use of a register at the output
// of the RAM primitive for Port A.
// C_HAS_MEM_OUTPUT_REGS_B : Designates the use of a register at the output
// of the RAM primitive for Port B.
// C_HAS_MUX_OUTPUT_REGS_A : Designates the use of a register at the output
// of the MUX for Port A.
// C_HAS_MUX_OUTPUT_REGS_B : Designates the use of a register at the output
// of the MUX for Port B.
// C_MUX_PIPELINE_STAGES : Designates the number of pipeline stages in
// between the muxes.
// C_USE_SOFTECC : Determines if the Soft ECC feature is used or
// not. Only applicable Spartan-6
// C_USE_ECC : Determines if the ECC feature is used or
// not. Only applicable for V5 and V6
// C_HAS_INJECTERR : Determines if the error injection pins
// are present or not. If the ECC feature
// is not used, this value is defaulted to
// 0, else the following are the allowed
// values:
// 0 : No INJECTSBITERR or INJECTDBITERR pins
// 1 : Only INJECTSBITERR pin exists
// 2 : Only INJECTDBITERR pin exists
// 3 : Both INJECTSBITERR and INJECTDBITERR pins exist
// C_SIM_COLLISION_CHECK : Controls the disabling of Unisim model collision
// warnings. It can be "ALL", "NONE",
// "Warnings_Only" or "Generate_X_Only".
// C_COMMON_CLK : Determins if the core has a single CLK input.
// C_DISABLE_WARN_BHV_COLL : Controls the Behavioral Model Collision warnings
// C_DISABLE_WARN_BHV_RANGE: Controls the Behavioral Model Out of Range
// warnings
//////////////////////////////////////////////////////////////////////////
// Port Definitions
//////////////////////////////////////////////////////////////////////////
// CLKA : Clock to synchronize all read and write operations of Port A.
// RSTA : Reset input to reset memory outputs to a user-defined
// reset state for Port A.
// ENA : Enable all read and write operations of Port A.
// REGCEA : Register Clock Enable to control each pipeline output
// register stages for Port A.
// WEA : Write Enable to enable all write operations of Port A.
// ADDRA : Address of Port A.
// DINA : Data input of Port A.
// DOUTA : Data output of Port A.
// CLKB : Clock to synchronize all read and write operations of Port B.
// RSTB : Reset input to reset memory outputs to a user-defined
// reset state for Port B.
// ENB : Enable all read and write operations of Port B.
// REGCEB : Register Clock Enable to control each pipeline output
// register stages for Port B.
// WEB : Write Enable to enable all write operations of Port B.
// ADDRB : Address of Port B.
// DINB : Data input of Port B.
// DOUTB : Data output of Port B.
// INJECTSBITERR : Single Bit ECC Error Injection Pin.
// INJECTDBITERR : Double Bit ECC Error Injection Pin.
// SBITERR : Output signal indicating that a Single Bit ECC Error has been
// detected and corrected.
// DBITERR : Output signal indicating that a Double Bit ECC Error has been
// detected.
// RDADDRECC : Read Address Output signal indicating address at which an
// ECC error has occurred.
//////////////////////////////////////////////////////////////////////////
// Note: C_CORENAME parameter is hard-coded to "blk_mem_gen_v8_2" and it is
// only used by this module to print warning messages. It is neither passed
// down from blk_mem_gen_v8_2_xst.v nor present in the instantiation template
// coregen generates
//***************************************************************************
// constants for the core behavior
//***************************************************************************
// file handles for logging
//--------------------------------------------------
localparam ADDRFILE = 32'h8000_0001; //stdout for addr out of range
localparam COLLFILE = 32'h8000_0001; //stdout for coll detection
localparam ERRFILE = 32'h8000_0001; //stdout for file I/O errors
// other constants
//--------------------------------------------------
localparam COLL_DELAY = 100; // 100 ps
// locally derived parameters to determine memory shape
//-----------------------------------------------------
localparam CHKBIT_WIDTH = (C_WRITE_WIDTH_A>57 ? 8 : (C_WRITE_WIDTH_A>26 ? 7 : (C_WRITE_WIDTH_A>11 ? 6 : (C_WRITE_WIDTH_A>4 ? 5 : (C_WRITE_WIDTH_A<5 ? 4 :0)))));
localparam MIN_WIDTH_A = (C_WRITE_WIDTH_A < C_READ_WIDTH_A) ?
C_WRITE_WIDTH_A : C_READ_WIDTH_A;
localparam MIN_WIDTH_B = (C_WRITE_WIDTH_B < C_READ_WIDTH_B) ?
C_WRITE_WIDTH_B : C_READ_WIDTH_B;
localparam MIN_WIDTH = (MIN_WIDTH_A < MIN_WIDTH_B) ?
MIN_WIDTH_A : MIN_WIDTH_B;
localparam MAX_DEPTH_A = (C_WRITE_DEPTH_A > C_READ_DEPTH_A) ?
C_WRITE_DEPTH_A : C_READ_DEPTH_A;
localparam MAX_DEPTH_B = (C_WRITE_DEPTH_B > C_READ_DEPTH_B) ?
C_WRITE_DEPTH_B : C_READ_DEPTH_B;
localparam MAX_DEPTH = (MAX_DEPTH_A > MAX_DEPTH_B) ?
MAX_DEPTH_A : MAX_DEPTH_B;
// locally derived parameters to assist memory access
//----------------------------------------------------
// Calculate the width ratios of each port with respect to the narrowest
// port
localparam WRITE_WIDTH_RATIO_A = C_WRITE_WIDTH_A/MIN_WIDTH;
localparam READ_WIDTH_RATIO_A = C_READ_WIDTH_A/MIN_WIDTH;
localparam WRITE_WIDTH_RATIO_B = C_WRITE_WIDTH_B/MIN_WIDTH;
localparam READ_WIDTH_RATIO_B = C_READ_WIDTH_B/MIN_WIDTH;
// To modify the LSBs of the 'wider' data to the actual
// address value
//----------------------------------------------------
localparam WRITE_ADDR_A_DIV = C_WRITE_WIDTH_A/MIN_WIDTH_A;
localparam READ_ADDR_A_DIV = C_READ_WIDTH_A/MIN_WIDTH_A;
localparam WRITE_ADDR_B_DIV = C_WRITE_WIDTH_B/MIN_WIDTH_B;
localparam READ_ADDR_B_DIV = C_READ_WIDTH_B/MIN_WIDTH_B;
// If byte writes aren't being used, make sure BYTE_SIZE is not
// wider than the memory elements to avoid compilation warnings
localparam BYTE_SIZE = (C_BYTE_SIZE < MIN_WIDTH) ? C_BYTE_SIZE : MIN_WIDTH;
// The memory
reg [MIN_WIDTH-1:0] memory [0:MAX_DEPTH-1];
reg [MIN_WIDTH-1:0] temp_mem_array [0:MAX_DEPTH-1];
reg [C_WRITE_WIDTH_A+CHKBIT_WIDTH-1:0] doublebit_error = 3;
// ECC error arrays
reg sbiterr_arr [0:MAX_DEPTH-1];
reg dbiterr_arr [0:MAX_DEPTH-1];
reg softecc_sbiterr_arr [0:MAX_DEPTH-1];
reg softecc_dbiterr_arr [0:MAX_DEPTH-1];
// Memory output 'latches'
reg [C_READ_WIDTH_A-1:0] memory_out_a;
reg [C_READ_WIDTH_B-1:0] memory_out_b;
// ECC error inputs and outputs from output_stage module:
reg sbiterr_in;
wire sbiterr_sdp;
reg dbiterr_in;
wire dbiterr_sdp;
wire [C_READ_WIDTH_B-1:0] dout_i;
wire dbiterr_i;
wire sbiterr_i;
wire [C_ADDRB_WIDTH-1:0] rdaddrecc_i;
reg [C_ADDRB_WIDTH-1:0] rdaddrecc_in;
wire [C_ADDRB_WIDTH-1:0] rdaddrecc_sdp;
// Reset values
reg [C_READ_WIDTH_A-1:0] inita_val;
reg [C_READ_WIDTH_B-1:0] initb_val;
// Collision detect
reg is_collision;
reg is_collision_a, is_collision_delay_a;
reg is_collision_b, is_collision_delay_b;
// Temporary variables for initialization
//---------------------------------------
integer status;
integer initfile;
integer meminitfile;
// data input buffer
reg [C_WRITE_WIDTH_A-1:0] mif_data;
reg [C_WRITE_WIDTH_A-1:0] mem_data;
// string values in hex
reg [C_READ_WIDTH_A*8-1:0] inita_str = C_INITA_VAL;
reg [C_READ_WIDTH_B*8-1:0] initb_str = C_INITB_VAL;
reg [C_WRITE_WIDTH_A*8-1:0] default_data_str = C_DEFAULT_DATA;
// initialization filename
reg [1023*8-1:0] init_file_str = C_INIT_FILE_NAME;
reg [1023*8-1:0] mem_init_file_str = C_INIT_FILE;
//Constants used to calculate the effective address widths for each of the
//four ports.
integer cnt = 1;
integer write_addr_a_width, read_addr_a_width;
integer write_addr_b_width, read_addr_b_width;
localparam C_FAMILY_LOCALPARAM = (C_FAMILY=="virtexu"?"virtex7":(C_FAMILY=="kintexu" ? "virtex7":(C_FAMILY=="virtex7" ? "virtex7" : (C_FAMILY=="virtex7l" ? "virtex7" : (C_FAMILY=="qvirtex7" ? "virtex7" : (C_FAMILY=="qvirtex7l" ? "virtex7" : (C_FAMILY=="kintex7" ? "virtex7" : (C_FAMILY=="kintex7l" ? "virtex7" : (C_FAMILY=="qkintex7" ? "virtex7" : (C_FAMILY=="qkintex7l" ? "virtex7" : (C_FAMILY=="artix7" ? "virtex7" : (C_FAMILY=="artix7l" ? "virtex7" : (C_FAMILY=="qartix7" ? "virtex7" : (C_FAMILY=="qartix7l" ? "virtex7" : (C_FAMILY=="aartix7" ? "virtex7" : (C_FAMILY=="zynq" ? "virtex7" : (C_FAMILY=="azynq" ? "virtex7" : (C_FAMILY=="qzynq" ? "virtex7" : C_FAMILY))))))))))))))))));
// Internal configuration parameters
//---------------------------------------------
localparam SINGLE_PORT = (C_MEM_TYPE==0 || C_MEM_TYPE==3);
localparam IS_ROM = (C_MEM_TYPE==3 || C_MEM_TYPE==4);
localparam HAS_A_WRITE = (!IS_ROM);
localparam HAS_B_WRITE = (C_MEM_TYPE==2);
localparam HAS_A_READ = (C_MEM_TYPE!=1);
localparam HAS_B_READ = (!SINGLE_PORT);
localparam HAS_B_PORT = (HAS_B_READ || HAS_B_WRITE);
// Calculate the mux pipeline register stages for Port A and Port B
//------------------------------------------------------------------
localparam MUX_PIPELINE_STAGES_A = (C_HAS_MUX_OUTPUT_REGS_A) ?
C_MUX_PIPELINE_STAGES : 0;
localparam MUX_PIPELINE_STAGES_B = (C_HAS_MUX_OUTPUT_REGS_B) ?
C_MUX_PIPELINE_STAGES : 0;
// Calculate total number of register stages in the core
// -----------------------------------------------------
localparam NUM_OUTPUT_STAGES_A = (C_HAS_MEM_OUTPUT_REGS_A+MUX_PIPELINE_STAGES_A+C_HAS_MUX_OUTPUT_REGS_A);
localparam NUM_OUTPUT_STAGES_B = (C_HAS_MEM_OUTPUT_REGS_B+MUX_PIPELINE_STAGES_B+C_HAS_MUX_OUTPUT_REGS_B);
wire ena_i;
wire enb_i;
wire reseta_i;
wire resetb_i;
wire [C_WEA_WIDTH-1:0] wea_i;
wire [C_WEB_WIDTH-1:0] web_i;
wire rea_i;
wire reb_i;
wire rsta_outp_stage;
wire rstb_outp_stage;
// ECC SBITERR/DBITERR Outputs
// The ECC Behavior is modeled by the behavioral models only for Virtex-6.
// For Virtex-5, these outputs will be tied to 0.
assign SBITERR = ((C_MEM_TYPE == 1 && C_USE_ECC == 1) || C_USE_SOFTECC == 1)?sbiterr_sdp:0;
assign DBITERR = ((C_MEM_TYPE == 1 && C_USE_ECC == 1) || C_USE_SOFTECC == 1)?dbiterr_sdp:0;
assign RDADDRECC = (((C_FAMILY_LOCALPARAM == "virtex7") && C_MEM_TYPE == 1 && C_USE_ECC == 1) || C_USE_SOFTECC == 1)?rdaddrecc_sdp:0;
// This effectively wires off optional inputs
assign ena_i = (C_HAS_ENA==0) || ENA;
assign enb_i = ((C_HAS_ENB==0) || ENB) && HAS_B_PORT;
assign wea_i = (HAS_A_WRITE && ena_i) ? WEA : 'b0;
assign web_i = (HAS_B_WRITE && enb_i) ? WEB : 'b0;
assign rea_i = (HAS_A_READ) ? ena_i : 'b0;
assign reb_i = (HAS_B_READ) ? enb_i : 'b0;
// These signals reset the memory latches
assign reseta_i =
((C_HAS_RSTA==1 && RSTA && NUM_OUTPUT_STAGES_A==0) ||
(C_HAS_RSTA==1 && RSTA && C_RSTRAM_A==1));
assign resetb_i =
((C_HAS_RSTB==1 && RSTB && NUM_OUTPUT_STAGES_B==0) ||
(C_HAS_RSTB==1 && RSTB && C_RSTRAM_B==1));
// Tasks to access the memory
//---------------------------
//**************
// write_a
//**************
task write_a
(input reg [C_ADDRA_WIDTH-1:0] addr,
input reg [C_WEA_WIDTH-1:0] byte_en,
input reg [C_WRITE_WIDTH_A-1:0] data,
input inj_sbiterr,
input inj_dbiterr);
reg [C_WRITE_WIDTH_A-1:0] current_contents;
reg [C_ADDRA_WIDTH-1:0] address;
integer i;
begin
// Shift the address by the ratio
address = (addr/WRITE_ADDR_A_DIV);
if (address >= C_WRITE_DEPTH_A) begin
if (!C_DISABLE_WARN_BHV_RANGE) begin
$fdisplay(ADDRFILE,
"%0s WARNING: Address %0h is outside range for A Write",
C_CORENAME, addr);
end
// valid address
end else begin
// Combine w/ byte writes
if (C_USE_BYTE_WEA) begin
// Get the current memory contents
if (WRITE_WIDTH_RATIO_A == 1) begin
// Workaround for IUS 5.5 part-select issue
current_contents = memory[address];
end else begin
for (i = 0; i < WRITE_WIDTH_RATIO_A; i = i + 1) begin
current_contents[MIN_WIDTH*i+:MIN_WIDTH]
= memory[address*WRITE_WIDTH_RATIO_A + i];
end
end
// Apply incoming bytes
if (C_WEA_WIDTH == 1) begin
// Workaround for IUS 5.5 part-select issue
if (byte_en[0]) begin
current_contents = data;
end
end else begin
for (i = 0; i < C_WEA_WIDTH; i = i + 1) begin
if (byte_en[i]) begin
current_contents[BYTE_SIZE*i+:BYTE_SIZE]
= data[BYTE_SIZE*i+:BYTE_SIZE];
end
end
end
// No byte-writes, overwrite the whole word
end else begin
current_contents = data;
end
// Insert double bit errors:
if (C_USE_ECC == 1) begin
if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin
current_contents[0] = !(current_contents[0]);
current_contents[1] = !(current_contents[1]);
end
end
// Insert softecc double bit errors:
if (C_USE_SOFTECC == 1) begin
if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin
doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-1:2] = doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-3:0];
doublebit_error[0] = doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-1];
doublebit_error[1] = doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-2];
current_contents = current_contents ^ doublebit_error[C_WRITE_WIDTH_A-1:0];
end
end
// Write data to memory
if (WRITE_WIDTH_RATIO_A == 1) begin
// Workaround for IUS 5.5 part-select issue
memory[address*WRITE_WIDTH_RATIO_A] = current_contents;
end else begin
for (i = 0; i < WRITE_WIDTH_RATIO_A; i = i + 1) begin
memory[address*WRITE_WIDTH_RATIO_A + i]
= current_contents[MIN_WIDTH*i+:MIN_WIDTH];
end
end
// Store the address at which error is injected:
if ((C_FAMILY_LOCALPARAM == "virtex7") && C_USE_ECC == 1) begin
if ((C_HAS_INJECTERR == 1 && inj_sbiterr == 1'b1) ||
(C_HAS_INJECTERR == 3 && inj_sbiterr == 1'b1 && inj_dbiterr != 1'b1))
begin
sbiterr_arr[addr] = 1;
end else begin
sbiterr_arr[addr] = 0;
end
if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin
dbiterr_arr[addr] = 1;
end else begin
dbiterr_arr[addr] = 0;
end
end
// Store the address at which softecc error is injected:
if (C_USE_SOFTECC == 1) begin
if ((C_HAS_INJECTERR == 1 && inj_sbiterr == 1'b1) ||
(C_HAS_INJECTERR == 3 && inj_sbiterr == 1'b1 && inj_dbiterr != 1'b1))
begin
softecc_sbiterr_arr[addr] = 1;
end else begin
softecc_sbiterr_arr[addr] = 0;
end
if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin
softecc_dbiterr_arr[addr] = 1;
end else begin
softecc_dbiterr_arr[addr] = 0;
end
end
end
end
endtask
//**************
// write_b
//**************
task write_b
(input reg [C_ADDRB_WIDTH-1:0] addr,
input reg [C_WEB_WIDTH-1:0] byte_en,
input reg [C_WRITE_WIDTH_B-1:0] data);
reg [C_WRITE_WIDTH_B-1:0] current_contents;
reg [C_ADDRB_WIDTH-1:0] address;
integer i;
begin
// Shift the address by the ratio
address = (addr/WRITE_ADDR_B_DIV);
if (address >= C_WRITE_DEPTH_B) begin
if (!C_DISABLE_WARN_BHV_RANGE) begin
$fdisplay(ADDRFILE,
"%0s WARNING: Address %0h is outside range for B Write",
C_CORENAME, addr);
end
// valid address
end else begin
// Combine w/ byte writes
if (C_USE_BYTE_WEB) begin
// Get the current memory contents
if (WRITE_WIDTH_RATIO_B == 1) begin
// Workaround for IUS 5.5 part-select issue
current_contents = memory[address];
end else begin
for (i = 0; i < WRITE_WIDTH_RATIO_B; i = i + 1) begin
current_contents[MIN_WIDTH*i+:MIN_WIDTH]
= memory[address*WRITE_WIDTH_RATIO_B + i];
end
end
// Apply incoming bytes
if (C_WEB_WIDTH == 1) begin
// Workaround for IUS 5.5 part-select issue
if (byte_en[0]) begin
current_contents = data;
end
end else begin
for (i = 0; i < C_WEB_WIDTH; i = i + 1) begin
if (byte_en[i]) begin
current_contents[BYTE_SIZE*i+:BYTE_SIZE]
= data[BYTE_SIZE*i+:BYTE_SIZE];
end
end
end
// No byte-writes, overwrite the whole word
end else begin
current_contents = data;
end
// Write data to memory
if (WRITE_WIDTH_RATIO_B == 1) begin
// Workaround for IUS 5.5 part-select issue
memory[address*WRITE_WIDTH_RATIO_B] = current_contents;
end else begin
for (i = 0; i < WRITE_WIDTH_RATIO_B; i = i + 1) begin
memory[address*WRITE_WIDTH_RATIO_B + i]
= current_contents[MIN_WIDTH*i+:MIN_WIDTH];
end
end
end
end
endtask
//**************
// read_a
//**************
task read_a
(input reg [C_ADDRA_WIDTH-1:0] addr,
input reg reset);
reg [C_ADDRA_WIDTH-1:0] address;
integer i;
begin
if (reset) begin
memory_out_a <= #FLOP_DELAY inita_val;
end else begin
// Shift the address by the ratio
address = (addr/READ_ADDR_A_DIV);
if (address >= C_READ_DEPTH_A) begin
if (!C_DISABLE_WARN_BHV_RANGE) begin
$fdisplay(ADDRFILE,
"%0s WARNING: Address %0h is outside range for A Read",
C_CORENAME, addr);
end
memory_out_a <= #FLOP_DELAY 'bX;
// valid address
end else begin
if (READ_WIDTH_RATIO_A==1) begin
memory_out_a <= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_A];
end else begin
// Increment through the 'partial' words in the memory
for (i = 0; i < READ_WIDTH_RATIO_A; i = i + 1) begin
memory_out_a[MIN_WIDTH*i+:MIN_WIDTH]
<= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_A + i];
end
end //end READ_WIDTH_RATIO_A==1 loop
end //end valid address loop
end //end reset-data assignment loops
end
endtask
//**************
// read_b
//**************
task read_b
(input reg [C_ADDRB_WIDTH-1:0] addr,
input reg reset);
reg [C_ADDRB_WIDTH-1:0] address;
integer i;
begin
if (reset) begin
memory_out_b <= #FLOP_DELAY initb_val;
sbiterr_in <= #FLOP_DELAY 1'b0;
dbiterr_in <= #FLOP_DELAY 1'b0;
rdaddrecc_in <= #FLOP_DELAY 0;
end else begin
// Shift the address
address = (addr/READ_ADDR_B_DIV);
if (address >= C_READ_DEPTH_B) begin
if (!C_DISABLE_WARN_BHV_RANGE) begin
$fdisplay(ADDRFILE,
"%0s WARNING: Address %0h is outside range for B Read",
C_CORENAME, addr);
end
memory_out_b <= #FLOP_DELAY 'bX;
sbiterr_in <= #FLOP_DELAY 1'bX;
dbiterr_in <= #FLOP_DELAY 1'bX;
rdaddrecc_in <= #FLOP_DELAY 'bX;
// valid address
end else begin
if (READ_WIDTH_RATIO_B==1) begin
memory_out_b <= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_B];
end else begin
// Increment through the 'partial' words in the memory
for (i = 0; i < READ_WIDTH_RATIO_B; i = i + 1) begin
memory_out_b[MIN_WIDTH*i+:MIN_WIDTH]
<= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_B + i];
end
end
if ((C_FAMILY_LOCALPARAM == "virtex7") && C_USE_ECC == 1) begin
rdaddrecc_in <= #FLOP_DELAY addr;
if (sbiterr_arr[addr] == 1) begin
sbiterr_in <= #FLOP_DELAY 1'b1;
end else begin
sbiterr_in <= #FLOP_DELAY 1'b0;
end
if (dbiterr_arr[addr] == 1) begin
dbiterr_in <= #FLOP_DELAY 1'b1;
end else begin
dbiterr_in <= #FLOP_DELAY 1'b0;
end
end else if (C_USE_SOFTECC == 1) begin
rdaddrecc_in <= #FLOP_DELAY addr;
if (softecc_sbiterr_arr[addr] == 1) begin
sbiterr_in <= #FLOP_DELAY 1'b1;
end else begin
sbiterr_in <= #FLOP_DELAY 1'b0;
end
if (softecc_dbiterr_arr[addr] == 1) begin
dbiterr_in <= #FLOP_DELAY 1'b1;
end else begin
dbiterr_in <= #FLOP_DELAY 1'b0;
end
end else begin
rdaddrecc_in <= #FLOP_DELAY 0;
dbiterr_in <= #FLOP_DELAY 1'b0;
sbiterr_in <= #FLOP_DELAY 1'b0;
end //end SOFTECC Loop
end //end Valid address loop
end //end reset-data assignment loops
end
endtask
//**************
// reset_a
//**************
task reset_a (input reg reset);
begin
if (reset) memory_out_a <= #FLOP_DELAY inita_val;
end
endtask
//**************
// reset_b
//**************
task reset_b (input reg reset);
begin
if (reset) memory_out_b <= #FLOP_DELAY initb_val;
end
endtask
//**************
// init_memory
//**************
task init_memory;
integer i, j, addr_step;
integer status;
reg [C_WRITE_WIDTH_A-1:0] default_data;
begin
default_data = 0;
//Display output message indicating that the behavioral model is being
//initialized
if (C_USE_DEFAULT_DATA || C_LOAD_INIT_FILE) $display(" Block Memory Generator module loading initial data...");
// Convert the default to hex
if (C_USE_DEFAULT_DATA) begin
if (default_data_str == "") begin
$fdisplay(ERRFILE, "%0s ERROR: C_DEFAULT_DATA is empty!", C_CORENAME);
$finish;
end else begin
status = $sscanf(default_data_str, "%h", default_data);
if (status == 0) begin
$fdisplay(ERRFILE, {"%0s ERROR: Unsuccessful hexadecimal read",
"from C_DEFAULT_DATA: %0s"},
C_CORENAME, C_DEFAULT_DATA);
$finish;
end
end
end
// Step by WRITE_ADDR_A_DIV through the memory via the
// Port A write interface to hit every location once
addr_step = WRITE_ADDR_A_DIV;
// 'write' to every location with default (or 0)
for (i = 0; i < C_WRITE_DEPTH_A*addr_step; i = i + addr_step) begin
write_a(i, {C_WEA_WIDTH{1'b1}}, default_data, 1'b0, 1'b0);
end
// Get specialized data from the MIF file
if (C_LOAD_INIT_FILE) begin
if (init_file_str == "") begin
$fdisplay(ERRFILE, "%0s ERROR: C_INIT_FILE_NAME is empty!",
C_CORENAME);
$finish;
end else begin
initfile = $fopen(init_file_str, "r");
if (initfile == 0) begin
$fdisplay(ERRFILE, {"%0s, ERROR: Problem opening",
"C_INIT_FILE_NAME: %0s!"},
C_CORENAME, init_file_str);
$finish;
end else begin
// loop through the mif file, loading in the data
for (i = 0; i < C_WRITE_DEPTH_A*addr_step; i = i + addr_step) begin
status = $fscanf(initfile, "%b", mif_data);
if (status > 0) begin
write_a(i, {C_WEA_WIDTH{1'b1}}, mif_data, 1'b0, 1'b0);
end
end
$fclose(initfile);
end //initfile
end //init_file_str
end //C_LOAD_INIT_FILE
if (C_USE_BRAM_BLOCK) begin
// Get specialized data from the MIF file
if (C_INIT_FILE != "NONE") begin
if (mem_init_file_str == "") begin
$fdisplay(ERRFILE, "%0s ERROR: C_INIT_FILE is empty!",
C_CORENAME);
$finish;
end else begin
meminitfile = $fopen(mem_init_file_str, "r");
if (meminitfile == 0) begin
$fdisplay(ERRFILE, {"%0s, ERROR: Problem opening",
"C_INIT_FILE: %0s!"},
C_CORENAME, mem_init_file_str);
$finish;
end else begin
// loop through the mif file, loading in the data
$readmemh(mem_init_file_str, memory );
for (j = 0; j < MAX_DEPTH-1 ; j = j + 1) begin
end
$fclose(meminitfile);
end //meminitfile
end //mem_init_file_str
end //C_INIT_FILE
end //C_USE_BRAM_BLOCK
//Display output message indicating that the behavioral model is done
//initializing
if (C_USE_DEFAULT_DATA || C_LOAD_INIT_FILE)
$display(" Block Memory Generator data initialization complete.");
end
endtask
//**************
// log2roundup
//**************
function integer log2roundup (input integer data_value);
integer width;
integer cnt;
begin
width = 0;
if (data_value > 1) begin
for(cnt=1 ; cnt < data_value ; cnt = cnt * 2) begin
width = width + 1;
end //loop
end //if
log2roundup = width;
end //log2roundup
endfunction
//*******************
// collision_check
//*******************
function integer collision_check (input reg [C_ADDRA_WIDTH-1:0] addr_a,
input integer iswrite_a,
input reg [C_ADDRB_WIDTH-1:0] addr_b,
input integer iswrite_b);
reg c_aw_bw, c_aw_br, c_ar_bw;
integer scaled_addra_to_waddrb_width;
integer scaled_addrb_to_waddrb_width;
integer scaled_addra_to_waddra_width;
integer scaled_addrb_to_waddra_width;
integer scaled_addra_to_raddrb_width;
integer scaled_addrb_to_raddrb_width;
integer scaled_addra_to_raddra_width;
integer scaled_addrb_to_raddra_width;
begin
c_aw_bw = 0;
c_aw_br = 0;
c_ar_bw = 0;
//If write_addr_b_width is smaller, scale both addresses to that width for
//comparing write_addr_a and write_addr_b; addr_a starts as C_ADDRA_WIDTH,
//scale it down to write_addr_b_width. addr_b starts as C_ADDRB_WIDTH,
//scale it down to write_addr_b_width. Once both are scaled to
//write_addr_b_width, compare.
scaled_addra_to_waddrb_width = ((addr_a)/
2**(C_ADDRA_WIDTH-write_addr_b_width));
scaled_addrb_to_waddrb_width = ((addr_b)/
2**(C_ADDRB_WIDTH-write_addr_b_width));
//If write_addr_a_width is smaller, scale both addresses to that width for
//comparing write_addr_a and write_addr_b; addr_a starts as C_ADDRA_WIDTH,
//scale it down to write_addr_a_width. addr_b starts as C_ADDRB_WIDTH,
//scale it down to write_addr_a_width. Once both are scaled to
//write_addr_a_width, compare.
scaled_addra_to_waddra_width = ((addr_a)/
2**(C_ADDRA_WIDTH-write_addr_a_width));
scaled_addrb_to_waddra_width = ((addr_b)/
2**(C_ADDRB_WIDTH-write_addr_a_width));
//If read_addr_b_width is smaller, scale both addresses to that width for
//comparing write_addr_a and read_addr_b; addr_a starts as C_ADDRA_WIDTH,
//scale it down to read_addr_b_width. addr_b starts as C_ADDRB_WIDTH,
//scale it down to read_addr_b_width. Once both are scaled to
//read_addr_b_width, compare.
scaled_addra_to_raddrb_width = ((addr_a)/
2**(C_ADDRA_WIDTH-read_addr_b_width));
scaled_addrb_to_raddrb_width = ((addr_b)/
2**(C_ADDRB_WIDTH-read_addr_b_width));
//If read_addr_a_width is smaller, scale both addresses to that width for
//comparing read_addr_a and write_addr_b; addr_a starts as C_ADDRA_WIDTH,
//scale it down to read_addr_a_width. addr_b starts as C_ADDRB_WIDTH,
//scale it down to read_addr_a_width. Once both are scaled to
//read_addr_a_width, compare.
scaled_addra_to_raddra_width = ((addr_a)/
2**(C_ADDRA_WIDTH-read_addr_a_width));
scaled_addrb_to_raddra_width = ((addr_b)/
2**(C_ADDRB_WIDTH-read_addr_a_width));
//Look for a write-write collision. In order for a write-write
//collision to exist, both ports must have a write transaction.
if (iswrite_a && iswrite_b) begin
if (write_addr_a_width > write_addr_b_width) begin
if (scaled_addra_to_waddrb_width == scaled_addrb_to_waddrb_width) begin
c_aw_bw = 1;
end else begin
c_aw_bw = 0;
end
end else begin
if (scaled_addrb_to_waddra_width == scaled_addra_to_waddra_width) begin
c_aw_bw = 1;
end else begin
c_aw_bw = 0;
end
end //width
end //iswrite_a and iswrite_b
//If the B port is reading (which means it is enabled - so could be
//a TX_WRITE or TX_READ), then check for a write-read collision).
//This could happen whether or not a write-write collision exists due
//to asymmetric write/read ports.
if (iswrite_a) begin
if (write_addr_a_width > read_addr_b_width) begin
if (scaled_addra_to_raddrb_width == scaled_addrb_to_raddrb_width) begin
c_aw_br = 1;
end else begin
c_aw_br = 0;
end
end else begin
if (scaled_addrb_to_waddra_width == scaled_addra_to_waddra_width) begin
c_aw_br = 1;
end else begin
c_aw_br = 0;
end
end //width
end //iswrite_a
//If the A port is reading (which means it is enabled - so could be
// a TX_WRITE or TX_READ), then check for a write-read collision).
//This could happen whether or not a write-write collision exists due
// to asymmetric write/read ports.
if (iswrite_b) begin
if (read_addr_a_width > write_addr_b_width) begin
if (scaled_addra_to_waddrb_width == scaled_addrb_to_waddrb_width) begin
c_ar_bw = 1;
end else begin
c_ar_bw = 0;
end
end else begin
if (scaled_addrb_to_raddra_width == scaled_addra_to_raddra_width) begin
c_ar_bw = 1;
end else begin
c_ar_bw = 0;
end
end //width
end //iswrite_b
collision_check = c_aw_bw | c_aw_br | c_ar_bw;
end
endfunction
//*******************************
// power on values
//*******************************
initial begin
// Load up the memory
init_memory;
// Load up the output registers and latches
if ($sscanf(inita_str, "%h", inita_val)) begin
memory_out_a = inita_val;
end else begin
memory_out_a = 0;
end
if ($sscanf(initb_str, "%h", initb_val)) begin
memory_out_b = initb_val;
end else begin
memory_out_b = 0;
end
sbiterr_in = 1'b0;
dbiterr_in = 1'b0;
rdaddrecc_in = 0;
// Determine the effective address widths for each of the 4 ports
write_addr_a_width = C_ADDRA_WIDTH - log2roundup(WRITE_ADDR_A_DIV);
read_addr_a_width = C_ADDRA_WIDTH - log2roundup(READ_ADDR_A_DIV);
write_addr_b_width = C_ADDRB_WIDTH - log2roundup(WRITE_ADDR_B_DIV);
read_addr_b_width = C_ADDRB_WIDTH - log2roundup(READ_ADDR_B_DIV);
$display("Block Memory Generator module %m is using a behavioral model for simulation which will not precisely model memory collision behavior.");
end
//***************************************************************************
// These are the main blocks which schedule read and write operations
// Note that the reset priority feature at the latch stage is only supported
// for Spartan-6. For other families, the default priority at the latch stage
// is "CE"
//***************************************************************************
// Synchronous clocks: schedule port operations with respect to
// both write operating modes
generate
if(C_COMMON_CLK && (C_WRITE_MODE_A == "WRITE_FIRST") && (C_WRITE_MODE_B ==
"WRITE_FIRST")) begin : com_clk_sched_wf_wf
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
end
end
else
if(C_COMMON_CLK && (C_WRITE_MODE_A == "READ_FIRST") && (C_WRITE_MODE_B ==
"WRITE_FIRST")) begin : com_clk_sched_rf_wf
always @(posedge CLKA) begin
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
end
end
else
if(C_COMMON_CLK && (C_WRITE_MODE_A == "WRITE_FIRST") && (C_WRITE_MODE_B ==
"READ_FIRST")) begin : com_clk_sched_wf_rf
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else
if(C_COMMON_CLK && (C_WRITE_MODE_A == "READ_FIRST") && (C_WRITE_MODE_B ==
"READ_FIRST")) begin : com_clk_sched_rf_rf
always @(posedge CLKA) begin
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="WRITE_FIRST") && (C_WRITE_MODE_B ==
"NO_CHANGE")) begin : com_clk_sched_wf_nc
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="READ_FIRST") && (C_WRITE_MODE_B ==
"NO_CHANGE")) begin : com_clk_sched_rf_nc
always @(posedge CLKA) begin
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="NO_CHANGE") && (C_WRITE_MODE_B ==
"WRITE_FIRST")) begin : com_clk_sched_nc_wf
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read A
if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="NO_CHANGE") && (C_WRITE_MODE_B ==
"READ_FIRST")) begin : com_clk_sched_nc_rf
always @(posedge CLKA) begin
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Read A
if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="NO_CHANGE") && (C_WRITE_MODE_B ==
"NO_CHANGE")) begin : com_clk_sched_nc_nc
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read A
if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i);
//Read B
if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i);
end
end
else if(C_COMMON_CLK) begin: com_clk_sched_default
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
end
end
endgenerate
// Asynchronous clocks: port operation is independent
generate
if((!C_COMMON_CLK) && (C_WRITE_MODE_A == "WRITE_FIRST")) begin : async_clk_sched_clka_wf
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
end
end
else if((!C_COMMON_CLK) && (C_WRITE_MODE_A == "READ_FIRST")) begin : async_clk_sched_clka_rf
always @(posedge CLKA) begin
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
end
end
else if((!C_COMMON_CLK) && (C_WRITE_MODE_A == "NO_CHANGE")) begin : async_clk_sched_clka_nc
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Read A
if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i);
end
end
endgenerate
generate
if ((!C_COMMON_CLK) && (C_WRITE_MODE_B == "WRITE_FIRST")) begin: async_clk_sched_clkb_wf
always @(posedge CLKB) begin
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
end
end
else if ((!C_COMMON_CLK) && (C_WRITE_MODE_B == "READ_FIRST")) begin: async_clk_sched_clkb_rf
always @(posedge CLKB) begin
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if ((!C_COMMON_CLK) && (C_WRITE_MODE_B == "NO_CHANGE")) begin: async_clk_sched_clkb_nc
always @(posedge CLKB) begin
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read B
if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i);
end
end
endgenerate
//***************************************************************
// Instantiate the variable depth output register stage module
//***************************************************************
// Port A
assign rsta_outp_stage = RSTA & (~SLEEP);
BLK_MEM_GEN_v8_2_output_stage
#(.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_RST_TYPE ("SYNC"),
.C_HAS_RST (C_HAS_RSTA),
.C_RSTRAM (C_RSTRAM_A),
.C_RST_PRIORITY (C_RST_PRIORITY_A),
.C_INIT_VAL (C_INITA_VAL),
.C_HAS_EN (C_HAS_ENA),
.C_HAS_REGCE (C_HAS_REGCEA),
.C_DATA_WIDTH (C_READ_WIDTH_A),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_MEM_OUTPUT_REGS (C_HAS_MEM_OUTPUT_REGS_A),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.NUM_STAGES (NUM_OUTPUT_STAGES_A),
.C_EN_ECC_PIPE (0),
.FLOP_DELAY (FLOP_DELAY))
reg_a
(.CLK (CLKA),
.RST (rsta_outp_stage),//(RSTA),
.EN (ENA),
.REGCE (REGCEA),
.DIN_I (memory_out_a),
.DOUT (DOUTA),
.SBITERR_IN_I (1'b0),
.DBITERR_IN_I (1'b0),
.SBITERR (),
.DBITERR (),
.RDADDRECC_IN_I ({C_ADDRB_WIDTH{1'b0}}),
.ECCPIPECE (1'b0),
.RDADDRECC ()
);
assign rstb_outp_stage = RSTB & (~SLEEP);
// Port B
BLK_MEM_GEN_v8_2_output_stage
#(.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_RST_TYPE ("SYNC"),
.C_HAS_RST (C_HAS_RSTB),
.C_RSTRAM (C_RSTRAM_B),
.C_RST_PRIORITY (C_RST_PRIORITY_B),
.C_INIT_VAL (C_INITB_VAL),
.C_HAS_EN (C_HAS_ENB),
.C_HAS_REGCE (C_HAS_REGCEB),
.C_DATA_WIDTH (C_READ_WIDTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_MEM_OUTPUT_REGS (C_HAS_MEM_OUTPUT_REGS_B),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.NUM_STAGES (NUM_OUTPUT_STAGES_B),
.C_EN_ECC_PIPE (C_EN_ECC_PIPE),
.FLOP_DELAY (FLOP_DELAY))
reg_b
(.CLK (CLKB),
.RST (rstb_outp_stage),//(RSTB),
.EN (ENB),
.REGCE (REGCEB),
.DIN_I (memory_out_b),
.DOUT (dout_i),
.SBITERR_IN_I (sbiterr_in),
.DBITERR_IN_I (dbiterr_in),
.SBITERR (sbiterr_i),
.DBITERR (dbiterr_i),
.RDADDRECC_IN_I (rdaddrecc_in),
.ECCPIPECE (ECCPIPECE),
.RDADDRECC (rdaddrecc_i)
);
//***************************************************************
// Instantiate the Input and Output register stages
//***************************************************************
BLK_MEM_GEN_v8_2_softecc_output_reg_stage
#(.C_DATA_WIDTH (C_READ_WIDTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B),
.C_USE_SOFTECC (C_USE_SOFTECC),
.FLOP_DELAY (FLOP_DELAY))
has_softecc_output_reg_stage
(.CLK (CLKB),
.DIN (dout_i),
.DOUT (DOUTB),
.SBITERR_IN (sbiterr_i),
.DBITERR_IN (dbiterr_i),
.SBITERR (sbiterr_sdp),
.DBITERR (dbiterr_sdp),
.RDADDRECC_IN (rdaddrecc_i),
.RDADDRECC (rdaddrecc_sdp)
);
//****************************************************
// Synchronous collision checks
//****************************************************
// CR 780544 : To make verilog model's collison warnings in consistant with
// vhdl model, the non-blocking assignments are replaced with blocking
// assignments.
generate if (!C_DISABLE_WARN_BHV_COLL && C_COMMON_CLK) begin : sync_coll
always @(posedge CLKA) begin
// Possible collision if both are enabled and the addresses match
if (ena_i && enb_i) begin
if (wea_i || web_i) begin
is_collision = collision_check(ADDRA, wea_i, ADDRB, web_i);
end else begin
is_collision = 0;
end
end else begin
is_collision = 0;
end
// If the write port is in READ_FIRST mode, there is no collision
if (C_WRITE_MODE_A=="READ_FIRST" && wea_i && !web_i) begin
is_collision = 0;
end
if (C_WRITE_MODE_B=="READ_FIRST" && web_i && !wea_i) begin
is_collision = 0;
end
// Only flag if one of the accesses is a write
if (is_collision && (wea_i || web_i)) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A %0s address: %0h, B %0s address: %0h\n",
wea_i ? "write" : "read", ADDRA,
web_i ? "write" : "read", ADDRB);
end
end
//****************************************************
// Asynchronous collision checks
//****************************************************
end else if (!C_DISABLE_WARN_BHV_COLL && !C_COMMON_CLK) begin : async_coll
// Delay A and B addresses in order to mimic setup/hold times
wire [C_ADDRA_WIDTH-1:0] #COLL_DELAY addra_delay = ADDRA;
wire [0:0] #COLL_DELAY wea_delay = wea_i;
wire #COLL_DELAY ena_delay = ena_i;
wire [C_ADDRB_WIDTH-1:0] #COLL_DELAY addrb_delay = ADDRB;
wire [0:0] #COLL_DELAY web_delay = web_i;
wire #COLL_DELAY enb_delay = enb_i;
// Do the checks w/rt A
always @(posedge CLKA) begin
// Possible collision if both are enabled and the addresses match
if (ena_i && enb_i) begin
if (wea_i || web_i) begin
is_collision_a = collision_check(ADDRA, wea_i, ADDRB, web_i);
end else begin
is_collision_a = 0;
end
end else begin
is_collision_a = 0;
end
if (ena_i && enb_delay) begin
if(wea_i || web_delay) begin
is_collision_delay_a = collision_check(ADDRA, wea_i, addrb_delay,
web_delay);
end else begin
is_collision_delay_a = 0;
end
end else begin
is_collision_delay_a = 0;
end
// Only flag if B access is a write
if (is_collision_a && web_i) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A %0s address: %0h, B write address: %0h\n",
wea_i ? "write" : "read", ADDRA, ADDRB);
end else if (is_collision_delay_a && web_delay) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A %0s address: %0h, B write address: %0h\n",
wea_i ? "write" : "read", ADDRA, addrb_delay);
end
end
// Do the checks w/rt B
always @(posedge CLKB) begin
// Possible collision if both are enabled and the addresses match
if (ena_i && enb_i) begin
if (wea_i || web_i) begin
is_collision_b = collision_check(ADDRA, wea_i, ADDRB, web_i);
end else begin
is_collision_b = 0;
end
end else begin
is_collision_b = 0;
end
if (ena_delay && enb_i) begin
if (wea_delay || web_i) begin
is_collision_delay_b = collision_check(addra_delay, wea_delay, ADDRB,
web_i);
end else begin
is_collision_delay_b = 0;
end
end else begin
is_collision_delay_b = 0;
end
// Only flag if A access is a write
if (is_collision_b && wea_i) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A write address: %0h, B %s address: %0h\n",
ADDRA, web_i ? "write" : "read", ADDRB);
end else if (is_collision_delay_b && wea_delay) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A write address: %0h, B %s address: %0h\n",
addra_delay, web_i ? "write" : "read", ADDRB);
end
end
end
endgenerate
endmodule
//*****************************************************************************
// Top module wraps Input register and Memory module
//
// This module is the top-level behavioral model and this implements the memory
// module and the input registers
//*****************************************************************************
module blk_mem_gen_v8_2
#(parameter C_CORENAME = "blk_mem_gen_v8_2",
parameter C_FAMILY = "virtex7",
parameter C_XDEVICEFAMILY = "virtex7",
parameter C_ELABORATION_DIR = "",
parameter C_INTERFACE_TYPE = 0,
parameter C_USE_BRAM_BLOCK = 0,
parameter C_CTRL_ECC_ALGO = "NONE",
parameter C_ENABLE_32BIT_ADDRESS = 0,
parameter C_AXI_TYPE = 0,
parameter C_AXI_SLAVE_TYPE = 0,
parameter C_HAS_AXI_ID = 0,
parameter C_AXI_ID_WIDTH = 4,
parameter C_MEM_TYPE = 2,
parameter C_BYTE_SIZE = 9,
parameter C_ALGORITHM = 1,
parameter C_PRIM_TYPE = 3,
parameter C_LOAD_INIT_FILE = 0,
parameter C_INIT_FILE_NAME = "",
parameter C_INIT_FILE = "",
parameter C_USE_DEFAULT_DATA = 0,
parameter C_DEFAULT_DATA = "0",
//parameter C_RST_TYPE = "SYNC",
parameter C_HAS_RSTA = 0,
parameter C_RST_PRIORITY_A = "CE",
parameter C_RSTRAM_A = 0,
parameter C_INITA_VAL = "0",
parameter C_HAS_ENA = 1,
parameter C_HAS_REGCEA = 0,
parameter C_USE_BYTE_WEA = 0,
parameter C_WEA_WIDTH = 1,
parameter C_WRITE_MODE_A = "WRITE_FIRST",
parameter C_WRITE_WIDTH_A = 32,
parameter C_READ_WIDTH_A = 32,
parameter C_WRITE_DEPTH_A = 64,
parameter C_READ_DEPTH_A = 64,
parameter C_ADDRA_WIDTH = 5,
parameter C_HAS_RSTB = 0,
parameter C_RST_PRIORITY_B = "CE",
parameter C_RSTRAM_B = 0,
parameter C_INITB_VAL = "",
parameter C_HAS_ENB = 1,
parameter C_HAS_REGCEB = 0,
parameter C_USE_BYTE_WEB = 0,
parameter C_WEB_WIDTH = 1,
parameter C_WRITE_MODE_B = "WRITE_FIRST",
parameter C_WRITE_WIDTH_B = 32,
parameter C_READ_WIDTH_B = 32,
parameter C_WRITE_DEPTH_B = 64,
parameter C_READ_DEPTH_B = 64,
parameter C_ADDRB_WIDTH = 5,
parameter C_HAS_MEM_OUTPUT_REGS_A = 0,
parameter C_HAS_MEM_OUTPUT_REGS_B = 0,
parameter C_HAS_MUX_OUTPUT_REGS_A = 0,
parameter C_HAS_MUX_OUTPUT_REGS_B = 0,
parameter C_HAS_SOFTECC_INPUT_REGS_A = 0,
parameter C_HAS_SOFTECC_OUTPUT_REGS_B= 0,
parameter C_MUX_PIPELINE_STAGES = 0,
parameter C_USE_SOFTECC = 0,
parameter C_USE_ECC = 0,
parameter C_EN_ECC_PIPE = 0,
parameter C_HAS_INJECTERR = 0,
parameter C_SIM_COLLISION_CHECK = "NONE",
parameter C_COMMON_CLK = 1,
parameter C_DISABLE_WARN_BHV_COLL = 0,
parameter C_EN_SLEEP_PIN = 0,
parameter C_USE_URAM = 0,
parameter C_EN_RDADDRA_CHG = 0,
parameter C_EN_RDADDRB_CHG = 0,
parameter C_EN_DEEPSLEEP_PIN = 0,
parameter C_EN_SHUTDOWN_PIN = 0,
parameter C_DISABLE_WARN_BHV_RANGE = 0,
parameter C_COUNT_36K_BRAM = "",
parameter C_COUNT_18K_BRAM = "",
parameter C_EST_POWER_SUMMARY = ""
)
(input clka,
input rsta,
input ena,
input regcea,
input [C_WEA_WIDTH-1:0] wea,
input [C_ADDRA_WIDTH-1:0] addra,
input [C_WRITE_WIDTH_A-1:0] dina,
output [C_READ_WIDTH_A-1:0] douta,
input clkb,
input rstb,
input enb,
input regceb,
input [C_WEB_WIDTH-1:0] web,
input [C_ADDRB_WIDTH-1:0] addrb,
input [C_WRITE_WIDTH_B-1:0] dinb,
output [C_READ_WIDTH_B-1:0] doutb,
input injectsbiterr,
input injectdbiterr,
output sbiterr,
output dbiterr,
output [C_ADDRB_WIDTH-1:0] rdaddrecc,
input eccpipece,
input sleep,
input deepsleep,
input shutdown,
//AXI BMG Input and Output Port Declarations
//AXI Global Signals
input s_aclk,
input s_aresetn,
//AXI Full/lite slave write (write side)
input [C_AXI_ID_WIDTH-1:0] s_axi_awid,
input [31:0] s_axi_awaddr,
input [7:0] s_axi_awlen,
input [2:0] s_axi_awsize,
input [1:0] s_axi_awburst,
input s_axi_awvalid,
output s_axi_awready,
input [C_WRITE_WIDTH_A-1:0] s_axi_wdata,
input [C_WEA_WIDTH-1:0] s_axi_wstrb,
input s_axi_wlast,
input s_axi_wvalid,
output s_axi_wready,
output [C_AXI_ID_WIDTH-1:0] s_axi_bid,
output [1:0] s_axi_bresp,
output s_axi_bvalid,
input s_axi_bready,
//AXI Full/lite slave read (write side)
input [C_AXI_ID_WIDTH-1:0] s_axi_arid,
input [31:0] s_axi_araddr,
input [7:0] s_axi_arlen,
input [2:0] s_axi_arsize,
input [1:0] s_axi_arburst,
input s_axi_arvalid,
output s_axi_arready,
output [C_AXI_ID_WIDTH-1:0] s_axi_rid,
output [C_WRITE_WIDTH_B-1:0] s_axi_rdata,
output [1:0] s_axi_rresp,
output s_axi_rlast,
output s_axi_rvalid,
input s_axi_rready,
//AXI Full/lite sideband signals
input s_axi_injectsbiterr,
input s_axi_injectdbiterr,
output s_axi_sbiterr,
output s_axi_dbiterr,
output [C_ADDRB_WIDTH-1:0] s_axi_rdaddrecc
);
//******************************
// Port and Generic Definitions
//******************************
//////////////////////////////////////////////////////////////////////////
// Generic Definitions
//////////////////////////////////////////////////////////////////////////
// C_CORENAME : Instance name of the Block Memory Generator core
// C_FAMILY,C_XDEVICEFAMILY: Designates architecture targeted. The following
// options are available - "spartan3", "spartan6",
// "virtex4", "virtex5", "virtex6" and "virtex6l".
// C_MEM_TYPE : Designates memory type.
// It can be
// 0 - Single Port Memory
// 1 - Simple Dual Port Memory
// 2 - True Dual Port Memory
// 3 - Single Port Read Only Memory
// 4 - Dual Port Read Only Memory
// C_BYTE_SIZE : Size of a byte (8 or 9 bits)
// C_ALGORITHM : Designates the algorithm method used
// for constructing the memory.
// It can be Fixed_Primitives, Minimum_Area or
// Low_Power
// C_PRIM_TYPE : Designates the user selected primitive used to
// construct the memory.
//
// C_LOAD_INIT_FILE : Designates the use of an initialization file to
// initialize memory contents.
// C_INIT_FILE_NAME : Memory initialization file name.
// C_USE_DEFAULT_DATA : Designates whether to fill remaining
// initialization space with default data
// C_DEFAULT_DATA : Default value of all memory locations
// not initialized by the memory
// initialization file.
// C_RST_TYPE : Type of reset - Synchronous or Asynchronous
// C_HAS_RSTA : Determines the presence of the RSTA port
// C_RST_PRIORITY_A : Determines the priority between CE and SR for
// Port A.
// C_RSTRAM_A : Determines if special reset behavior is used for
// Port A
// C_INITA_VAL : The initialization value for Port A
// C_HAS_ENA : Determines the presence of the ENA port
// C_HAS_REGCEA : Determines the presence of the REGCEA port
// C_USE_BYTE_WEA : Determines if the Byte Write is used or not.
// C_WEA_WIDTH : The width of the WEA port
// C_WRITE_MODE_A : Configurable write mode for Port A. It can be
// WRITE_FIRST, READ_FIRST or NO_CHANGE.
// C_WRITE_WIDTH_A : Memory write width for Port A.
// C_READ_WIDTH_A : Memory read width for Port A.
// C_WRITE_DEPTH_A : Memory write depth for Port A.
// C_READ_DEPTH_A : Memory read depth for Port A.
// C_ADDRA_WIDTH : Width of the ADDRA input port
// C_HAS_RSTB : Determines the presence of the RSTB port
// C_RST_PRIORITY_B : Determines the priority between CE and SR for
// Port B.
// C_RSTRAM_B : Determines if special reset behavior is used for
// Port B
// C_INITB_VAL : The initialization value for Port B
// C_HAS_ENB : Determines the presence of the ENB port
// C_HAS_REGCEB : Determines the presence of the REGCEB port
// C_USE_BYTE_WEB : Determines if the Byte Write is used or not.
// C_WEB_WIDTH : The width of the WEB port
// C_WRITE_MODE_B : Configurable write mode for Port B. It can be
// WRITE_FIRST, READ_FIRST or NO_CHANGE.
// C_WRITE_WIDTH_B : Memory write width for Port B.
// C_READ_WIDTH_B : Memory read width for Port B.
// C_WRITE_DEPTH_B : Memory write depth for Port B.
// C_READ_DEPTH_B : Memory read depth for Port B.
// C_ADDRB_WIDTH : Width of the ADDRB input port
// C_HAS_MEM_OUTPUT_REGS_A : Designates the use of a register at the output
// of the RAM primitive for Port A.
// C_HAS_MEM_OUTPUT_REGS_B : Designates the use of a register at the output
// of the RAM primitive for Port B.
// C_HAS_MUX_OUTPUT_REGS_A : Designates the use of a register at the output
// of the MUX for Port A.
// C_HAS_MUX_OUTPUT_REGS_B : Designates the use of a register at the output
// of the MUX for Port B.
// C_HAS_SOFTECC_INPUT_REGS_A :
// C_HAS_SOFTECC_OUTPUT_REGS_B :
// C_MUX_PIPELINE_STAGES : Designates the number of pipeline stages in
// between the muxes.
// C_USE_SOFTECC : Determines if the Soft ECC feature is used or
// not. Only applicable Spartan-6
// C_USE_ECC : Determines if the ECC feature is used or
// not. Only applicable for V5 and V6
// C_HAS_INJECTERR : Determines if the error injection pins
// are present or not. If the ECC feature
// is not used, this value is defaulted to
// 0, else the following are the allowed
// values:
// 0 : No INJECTSBITERR or INJECTDBITERR pins
// 1 : Only INJECTSBITERR pin exists
// 2 : Only INJECTDBITERR pin exists
// 3 : Both INJECTSBITERR and INJECTDBITERR pins exist
// C_SIM_COLLISION_CHECK : Controls the disabling of Unisim model collision
// warnings. It can be "ALL", "NONE",
// "Warnings_Only" or "Generate_X_Only".
// C_COMMON_CLK : Determins if the core has a single CLK input.
// C_DISABLE_WARN_BHV_COLL : Controls the Behavioral Model Collision warnings
// C_DISABLE_WARN_BHV_RANGE: Controls the Behavioral Model Out of Range
// warnings
//////////////////////////////////////////////////////////////////////////
// Port Definitions
//////////////////////////////////////////////////////////////////////////
// CLKA : Clock to synchronize all read and write operations of Port A.
// RSTA : Reset input to reset memory outputs to a user-defined
// reset state for Port A.
// ENA : Enable all read and write operations of Port A.
// REGCEA : Register Clock Enable to control each pipeline output
// register stages for Port A.
// WEA : Write Enable to enable all write operations of Port A.
// ADDRA : Address of Port A.
// DINA : Data input of Port A.
// DOUTA : Data output of Port A.
// CLKB : Clock to synchronize all read and write operations of Port B.
// RSTB : Reset input to reset memory outputs to a user-defined
// reset state for Port B.
// ENB : Enable all read and write operations of Port B.
// REGCEB : Register Clock Enable to control each pipeline output
// register stages for Port B.
// WEB : Write Enable to enable all write operations of Port B.
// ADDRB : Address of Port B.
// DINB : Data input of Port B.
// DOUTB : Data output of Port B.
// INJECTSBITERR : Single Bit ECC Error Injection Pin.
// INJECTDBITERR : Double Bit ECC Error Injection Pin.
// SBITERR : Output signal indicating that a Single Bit ECC Error has been
// detected and corrected.
// DBITERR : Output signal indicating that a Double Bit ECC Error has been
// detected.
// RDADDRECC : Read Address Output signal indicating address at which an
// ECC error has occurred.
//////////////////////////////////////////////////////////////////////////
wire SBITERR;
wire DBITERR;
wire S_AXI_AWREADY;
wire S_AXI_WREADY;
wire S_AXI_BVALID;
wire S_AXI_ARREADY;
wire S_AXI_RLAST;
wire S_AXI_RVALID;
wire S_AXI_SBITERR;
wire S_AXI_DBITERR;
wire [C_WEA_WIDTH-1:0] WEA = wea;
wire [C_ADDRA_WIDTH-1:0] ADDRA = addra;
wire [C_WRITE_WIDTH_A-1:0] DINA = dina;
wire [C_READ_WIDTH_A-1:0] DOUTA;
wire [C_WEB_WIDTH-1:0] WEB = web;
wire [C_ADDRB_WIDTH-1:0] ADDRB = addrb;
wire [C_WRITE_WIDTH_B-1:0] DINB = dinb;
wire [C_READ_WIDTH_B-1:0] DOUTB;
wire [C_ADDRB_WIDTH-1:0] RDADDRECC;
wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID = s_axi_awid;
wire [31:0] S_AXI_AWADDR = s_axi_awaddr;
wire [7:0] S_AXI_AWLEN = s_axi_awlen;
wire [2:0] S_AXI_AWSIZE = s_axi_awsize;
wire [1:0] S_AXI_AWBURST = s_axi_awburst;
wire [C_WRITE_WIDTH_A-1:0] S_AXI_WDATA = s_axi_wdata;
wire [C_WEA_WIDTH-1:0] S_AXI_WSTRB = s_axi_wstrb;
wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID;
wire [1:0] S_AXI_BRESP;
wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID = s_axi_arid;
wire [31:0] S_AXI_ARADDR = s_axi_araddr;
wire [7:0] S_AXI_ARLEN = s_axi_arlen;
wire [2:0] S_AXI_ARSIZE = s_axi_arsize;
wire [1:0] S_AXI_ARBURST = s_axi_arburst;
wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID;
wire [C_WRITE_WIDTH_B-1:0] S_AXI_RDATA;
wire [1:0] S_AXI_RRESP;
wire [C_ADDRB_WIDTH-1:0] S_AXI_RDADDRECC;
// Added to fix the simulation warning #CR731605
wire [C_WEB_WIDTH-1:0] WEB_parameterized = 0;
wire ECCPIPECE;
wire SLEEP;
assign CLKA = clka;
assign RSTA = rsta;
assign ENA = ena;
assign REGCEA = regcea;
assign CLKB = clkb;
assign RSTB = rstb;
assign ENB = enb;
assign REGCEB = regceb;
assign INJECTSBITERR = injectsbiterr;
assign INJECTDBITERR = injectdbiterr;
assign ECCPIPECE = eccpipece;
assign SLEEP = sleep;
assign sbiterr = SBITERR;
assign dbiterr = DBITERR;
assign S_ACLK = s_aclk;
assign S_ARESETN = s_aresetn;
assign S_AXI_AWVALID = s_axi_awvalid;
assign s_axi_awready = S_AXI_AWREADY;
assign S_AXI_WLAST = s_axi_wlast;
assign S_AXI_WVALID = s_axi_wvalid;
assign s_axi_wready = S_AXI_WREADY;
assign s_axi_bvalid = S_AXI_BVALID;
assign S_AXI_BREADY = s_axi_bready;
assign S_AXI_ARVALID = s_axi_arvalid;
assign s_axi_arready = S_AXI_ARREADY;
assign s_axi_rlast = S_AXI_RLAST;
assign s_axi_rvalid = S_AXI_RVALID;
assign S_AXI_RREADY = s_axi_rready;
assign S_AXI_INJECTSBITERR = s_axi_injectsbiterr;
assign S_AXI_INJECTDBITERR = s_axi_injectdbiterr;
assign s_axi_sbiterr = S_AXI_SBITERR;
assign s_axi_dbiterr = S_AXI_DBITERR;
assign doutb = DOUTB;
assign douta = DOUTA;
assign rdaddrecc = RDADDRECC;
assign s_axi_bid = S_AXI_BID;
assign s_axi_bresp = S_AXI_BRESP;
assign s_axi_rid = S_AXI_RID;
assign s_axi_rdata = S_AXI_RDATA;
assign s_axi_rresp = S_AXI_RRESP;
assign s_axi_rdaddrecc = S_AXI_RDADDRECC;
localparam FLOP_DELAY = 100; // 100 ps
reg injectsbiterr_in;
reg injectdbiterr_in;
reg rsta_in;
reg ena_in;
reg regcea_in;
reg [C_WEA_WIDTH-1:0] wea_in;
reg [C_ADDRA_WIDTH-1:0] addra_in;
reg [C_WRITE_WIDTH_A-1:0] dina_in;
wire [C_ADDRA_WIDTH-1:0] s_axi_awaddr_out_c;
wire [C_ADDRB_WIDTH-1:0] s_axi_araddr_out_c;
wire s_axi_wr_en_c;
wire s_axi_rd_en_c;
wire s_aresetn_a_c;
wire [7:0] s_axi_arlen_c ;
wire [C_AXI_ID_WIDTH-1 : 0] s_axi_rid_c;
wire [C_WRITE_WIDTH_B-1 : 0] s_axi_rdata_c;
wire [1:0] s_axi_rresp_c;
wire s_axi_rlast_c;
wire s_axi_rvalid_c;
wire s_axi_rready_c;
wire regceb_c;
localparam C_AXI_PAYLOAD = (C_HAS_MUX_OUTPUT_REGS_B == 1)?C_WRITE_WIDTH_B+C_AXI_ID_WIDTH+3:C_AXI_ID_WIDTH+3;
wire [C_AXI_PAYLOAD-1 : 0] s_axi_payload_c;
wire [C_AXI_PAYLOAD-1 : 0] m_axi_payload_c;
//**************
// log2roundup
//**************
function integer log2roundup (input integer data_value);
integer width;
integer cnt;
begin
width = 0;
if (data_value > 1) begin
for(cnt=1 ; cnt < data_value ; cnt = cnt * 2) begin
width = width + 1;
end //loop
end //if
log2roundup = width;
end //log2roundup
endfunction
//**************
// log2int
//**************
function integer log2int (input integer data_value);
integer width;
integer cnt;
begin
width = 0;
cnt= data_value;
for(cnt=data_value ; cnt >1 ; cnt = cnt / 2) begin
width = width + 1;
end //loop
log2int = width;
end //log2int
endfunction
//**************************************************************************
// FUNCTION : divroundup
// Returns the ceiling value of the division
// Data_value - the quantity to be divided, dividend
// Divisor - the value to divide the data_value by
//**************************************************************************
function integer divroundup (input integer data_value,input integer divisor);
integer div;
begin
div = data_value/divisor;
if ((data_value % divisor) != 0) begin
div = div+1;
end //if
divroundup = div;
end //if
endfunction
localparam AXI_FULL_MEMORY_SLAVE = ((C_AXI_SLAVE_TYPE == 0 && C_AXI_TYPE == 1)?1:0);
localparam C_AXI_ADDR_WIDTH_MSB = C_ADDRA_WIDTH+log2roundup(C_WRITE_WIDTH_A/8);
localparam C_AXI_ADDR_WIDTH = C_AXI_ADDR_WIDTH_MSB;
//Data Width Number of LSB address bits to be discarded
//1 to 16 1
//17 to 32 2
//33 to 64 3
//65 to 128 4
//129 to 256 5
//257 to 512 6
//513 to 1024 7
// The following two constants determine this.
localparam LOWER_BOUND_VAL = (log2roundup(divroundup(C_WRITE_WIDTH_A,8) == 0))?0:(log2roundup(divroundup(C_WRITE_WIDTH_A,8)));
localparam C_AXI_ADDR_WIDTH_LSB = ((AXI_FULL_MEMORY_SLAVE == 1)?0:LOWER_BOUND_VAL);
localparam C_AXI_OS_WR = 2;
//***********************************************
// INPUT REGISTERS.
//***********************************************
generate if (C_HAS_SOFTECC_INPUT_REGS_A==0) begin : no_softecc_input_reg_stage
always @* begin
injectsbiterr_in = INJECTSBITERR;
injectdbiterr_in = INJECTDBITERR;
rsta_in = RSTA;
ena_in = ENA;
regcea_in = REGCEA;
wea_in = WEA;
addra_in = ADDRA;
dina_in = DINA;
end //end always
end //end no_softecc_input_reg_stage
endgenerate
generate if (C_HAS_SOFTECC_INPUT_REGS_A==1) begin : has_softecc_input_reg_stage
always @(posedge CLKA) begin
injectsbiterr_in <= #FLOP_DELAY INJECTSBITERR;
injectdbiterr_in <= #FLOP_DELAY INJECTDBITERR;
rsta_in <= #FLOP_DELAY RSTA;
ena_in <= #FLOP_DELAY ENA;
regcea_in <= #FLOP_DELAY REGCEA;
wea_in <= #FLOP_DELAY WEA;
addra_in <= #FLOP_DELAY ADDRA;
dina_in <= #FLOP_DELAY DINA;
end //end always
end //end input_reg_stages generate statement
endgenerate
generate if ((C_INTERFACE_TYPE == 0) && (C_ENABLE_32BIT_ADDRESS == 0)) begin : native_mem_module
BLK_MEM_GEN_v8_2_mem_module
#(.C_CORENAME (C_CORENAME),
.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_MEM_TYPE (C_MEM_TYPE),
.C_BYTE_SIZE (C_BYTE_SIZE),
.C_ALGORITHM (C_ALGORITHM),
.C_USE_BRAM_BLOCK (C_USE_BRAM_BLOCK),
.C_PRIM_TYPE (C_PRIM_TYPE),
.C_LOAD_INIT_FILE (C_LOAD_INIT_FILE),
.C_INIT_FILE_NAME (C_INIT_FILE_NAME),
.C_INIT_FILE (C_INIT_FILE),
.C_USE_DEFAULT_DATA (C_USE_DEFAULT_DATA),
.C_DEFAULT_DATA (C_DEFAULT_DATA),
.C_RST_TYPE ("SYNC"),
.C_HAS_RSTA (C_HAS_RSTA),
.C_RST_PRIORITY_A (C_RST_PRIORITY_A),
.C_RSTRAM_A (C_RSTRAM_A),
.C_INITA_VAL (C_INITA_VAL),
.C_HAS_ENA (C_HAS_ENA),
.C_HAS_REGCEA (C_HAS_REGCEA),
.C_USE_BYTE_WEA (C_USE_BYTE_WEA),
.C_WEA_WIDTH (C_WEA_WIDTH),
.C_WRITE_MODE_A (C_WRITE_MODE_A),
.C_WRITE_WIDTH_A (C_WRITE_WIDTH_A),
.C_READ_WIDTH_A (C_READ_WIDTH_A),
.C_WRITE_DEPTH_A (C_WRITE_DEPTH_A),
.C_READ_DEPTH_A (C_READ_DEPTH_A),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH),
.C_HAS_RSTB (C_HAS_RSTB),
.C_RST_PRIORITY_B (C_RST_PRIORITY_B),
.C_RSTRAM_B (C_RSTRAM_B),
.C_INITB_VAL (C_INITB_VAL),
.C_HAS_ENB (C_HAS_ENB),
.C_HAS_REGCEB (C_HAS_REGCEB),
.C_USE_BYTE_WEB (C_USE_BYTE_WEB),
.C_WEB_WIDTH (C_WEB_WIDTH),
.C_WRITE_MODE_B (C_WRITE_MODE_B),
.C_WRITE_WIDTH_B (C_WRITE_WIDTH_B),
.C_READ_WIDTH_B (C_READ_WIDTH_B),
.C_WRITE_DEPTH_B (C_WRITE_DEPTH_B),
.C_READ_DEPTH_B (C_READ_DEPTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_MEM_OUTPUT_REGS_A (C_HAS_MEM_OUTPUT_REGS_A),
.C_HAS_MEM_OUTPUT_REGS_B (C_HAS_MEM_OUTPUT_REGS_B),
.C_HAS_MUX_OUTPUT_REGS_A (C_HAS_MUX_OUTPUT_REGS_A),
.C_HAS_MUX_OUTPUT_REGS_B (C_HAS_MUX_OUTPUT_REGS_B),
.C_HAS_SOFTECC_INPUT_REGS_A (C_HAS_SOFTECC_INPUT_REGS_A),
.C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B),
.C_MUX_PIPELINE_STAGES (C_MUX_PIPELINE_STAGES),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.C_HAS_INJECTERR (C_HAS_INJECTERR),
.C_SIM_COLLISION_CHECK (C_SIM_COLLISION_CHECK),
.C_COMMON_CLK (C_COMMON_CLK),
.FLOP_DELAY (FLOP_DELAY),
.C_DISABLE_WARN_BHV_COLL (C_DISABLE_WARN_BHV_COLL),
.C_EN_ECC_PIPE (C_EN_ECC_PIPE),
.C_DISABLE_WARN_BHV_RANGE (C_DISABLE_WARN_BHV_RANGE))
blk_mem_gen_v8_2_inst
(.CLKA (CLKA),
.RSTA (rsta_in),
.ENA (ena_in),
.REGCEA (regcea_in),
.WEA (wea_in),
.ADDRA (addra_in),
.DINA (dina_in),
.DOUTA (DOUTA),
.CLKB (CLKB),
.RSTB (RSTB),
.ENB (ENB),
.REGCEB (REGCEB),
.WEB (WEB),
.ADDRB (ADDRB),
.DINB (DINB),
.DOUTB (DOUTB),
.INJECTSBITERR (injectsbiterr_in),
.INJECTDBITERR (injectdbiterr_in),
.ECCPIPECE (ECCPIPECE),
.SLEEP (SLEEP),
.SBITERR (SBITERR),
.DBITERR (DBITERR),
.RDADDRECC (RDADDRECC)
);
end
endgenerate
generate if((C_INTERFACE_TYPE == 0) && (C_ENABLE_32BIT_ADDRESS == 1)) begin : native_mem_mapped_module
localparam C_ADDRA_WIDTH_ACTUAL = log2roundup(C_WRITE_DEPTH_A);
localparam C_ADDRB_WIDTH_ACTUAL = log2roundup(C_WRITE_DEPTH_B);
localparam C_ADDRA_WIDTH_MSB = C_ADDRA_WIDTH_ACTUAL+log2int(C_WRITE_WIDTH_A/8);
localparam C_ADDRB_WIDTH_MSB = C_ADDRB_WIDTH_ACTUAL+log2int(C_WRITE_WIDTH_B/8);
// localparam C_ADDRA_WIDTH_MSB = C_ADDRA_WIDTH_ACTUAL+log2roundup(C_WRITE_WIDTH_A/8);
// localparam C_ADDRB_WIDTH_MSB = C_ADDRB_WIDTH_ACTUAL+log2roundup(C_WRITE_WIDTH_B/8);
localparam C_MEM_MAP_ADDRA_WIDTH_MSB = C_ADDRA_WIDTH_MSB;
localparam C_MEM_MAP_ADDRB_WIDTH_MSB = C_ADDRB_WIDTH_MSB;
// Data Width Number of LSB address bits to be discarded
// 1 to 16 1
// 17 to 32 2
// 33 to 64 3
// 65 to 128 4
// 129 to 256 5
// 257 to 512 6
// 513 to 1024 7
// The following two constants determine this.
localparam MEM_MAP_LOWER_BOUND_VAL_A = (log2int(divroundup(C_WRITE_WIDTH_A,8)==0)) ? 0:(log2int(divroundup(C_WRITE_WIDTH_A,8)));
localparam MEM_MAP_LOWER_BOUND_VAL_B = (log2int(divroundup(C_WRITE_WIDTH_A,8)==0)) ? 0:(log2int(divroundup(C_WRITE_WIDTH_A,8)));
localparam C_MEM_MAP_ADDRA_WIDTH_LSB = MEM_MAP_LOWER_BOUND_VAL_A;
localparam C_MEM_MAP_ADDRB_WIDTH_LSB = MEM_MAP_LOWER_BOUND_VAL_B;
wire [C_ADDRB_WIDTH_ACTUAL-1 :0] rdaddrecc_i;
wire [C_ADDRB_WIDTH-1:C_MEM_MAP_ADDRB_WIDTH_MSB] msb_zero_i;
wire [C_MEM_MAP_ADDRB_WIDTH_LSB-1:0] lsb_zero_i;
assign msb_zero_i = 0;
assign lsb_zero_i = 0;
assign RDADDRECC = {msb_zero_i,rdaddrecc_i,lsb_zero_i};
BLK_MEM_GEN_v8_2_mem_module
#(.C_CORENAME (C_CORENAME),
.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_MEM_TYPE (C_MEM_TYPE),
.C_BYTE_SIZE (C_BYTE_SIZE),
.C_USE_BRAM_BLOCK (C_USE_BRAM_BLOCK),
.C_ALGORITHM (C_ALGORITHM),
.C_PRIM_TYPE (C_PRIM_TYPE),
.C_LOAD_INIT_FILE (C_LOAD_INIT_FILE),
.C_INIT_FILE_NAME (C_INIT_FILE_NAME),
.C_INIT_FILE (C_INIT_FILE),
.C_USE_DEFAULT_DATA (C_USE_DEFAULT_DATA),
.C_DEFAULT_DATA (C_DEFAULT_DATA),
.C_RST_TYPE ("SYNC"),
.C_HAS_RSTA (C_HAS_RSTA),
.C_RST_PRIORITY_A (C_RST_PRIORITY_A),
.C_RSTRAM_A (C_RSTRAM_A),
.C_INITA_VAL (C_INITA_VAL),
.C_HAS_ENA (C_HAS_ENA),
.C_HAS_REGCEA (C_HAS_REGCEA),
.C_USE_BYTE_WEA (C_USE_BYTE_WEA),
.C_WEA_WIDTH (C_WEA_WIDTH),
.C_WRITE_MODE_A (C_WRITE_MODE_A),
.C_WRITE_WIDTH_A (C_WRITE_WIDTH_A),
.C_READ_WIDTH_A (C_READ_WIDTH_A),
.C_WRITE_DEPTH_A (C_WRITE_DEPTH_A),
.C_READ_DEPTH_A (C_READ_DEPTH_A),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH_ACTUAL),
.C_HAS_RSTB (C_HAS_RSTB),
.C_RST_PRIORITY_B (C_RST_PRIORITY_B),
.C_RSTRAM_B (C_RSTRAM_B),
.C_INITB_VAL (C_INITB_VAL),
.C_HAS_ENB (C_HAS_ENB),
.C_HAS_REGCEB (C_HAS_REGCEB),
.C_USE_BYTE_WEB (C_USE_BYTE_WEB),
.C_WEB_WIDTH (C_WEB_WIDTH),
.C_WRITE_MODE_B (C_WRITE_MODE_B),
.C_WRITE_WIDTH_B (C_WRITE_WIDTH_B),
.C_READ_WIDTH_B (C_READ_WIDTH_B),
.C_WRITE_DEPTH_B (C_WRITE_DEPTH_B),
.C_READ_DEPTH_B (C_READ_DEPTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH_ACTUAL),
.C_HAS_MEM_OUTPUT_REGS_A (C_HAS_MEM_OUTPUT_REGS_A),
.C_HAS_MEM_OUTPUT_REGS_B (C_HAS_MEM_OUTPUT_REGS_B),
.C_HAS_MUX_OUTPUT_REGS_A (C_HAS_MUX_OUTPUT_REGS_A),
.C_HAS_MUX_OUTPUT_REGS_B (C_HAS_MUX_OUTPUT_REGS_B),
.C_HAS_SOFTECC_INPUT_REGS_A (C_HAS_SOFTECC_INPUT_REGS_A),
.C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B),
.C_MUX_PIPELINE_STAGES (C_MUX_PIPELINE_STAGES),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.C_HAS_INJECTERR (C_HAS_INJECTERR),
.C_SIM_COLLISION_CHECK (C_SIM_COLLISION_CHECK),
.C_COMMON_CLK (C_COMMON_CLK),
.FLOP_DELAY (FLOP_DELAY),
.C_DISABLE_WARN_BHV_COLL (C_DISABLE_WARN_BHV_COLL),
.C_EN_ECC_PIPE (C_EN_ECC_PIPE),
.C_DISABLE_WARN_BHV_RANGE (C_DISABLE_WARN_BHV_RANGE))
blk_mem_gen_v8_2_inst
(.CLKA (CLKA),
.RSTA (rsta_in),
.ENA (ena_in),
.REGCEA (regcea_in),
.WEA (wea_in),
.ADDRA (addra_in[C_MEM_MAP_ADDRA_WIDTH_MSB-1:C_MEM_MAP_ADDRA_WIDTH_LSB]),
.DINA (dina_in),
.DOUTA (DOUTA),
.CLKB (CLKB),
.RSTB (RSTB),
.ENB (ENB),
.REGCEB (REGCEB),
.WEB (WEB),
.ADDRB (ADDRB[C_MEM_MAP_ADDRB_WIDTH_MSB-1:C_MEM_MAP_ADDRB_WIDTH_LSB]),
.DINB (DINB),
.DOUTB (DOUTB),
.INJECTSBITERR (injectsbiterr_in),
.INJECTDBITERR (injectdbiterr_in),
.ECCPIPECE (ECCPIPECE),
.SLEEP (SLEEP),
.SBITERR (SBITERR),
.DBITERR (DBITERR),
.RDADDRECC (rdaddrecc_i)
);
end
endgenerate
generate if (C_HAS_MEM_OUTPUT_REGS_B == 0 && C_HAS_MUX_OUTPUT_REGS_B == 0 ) begin : no_regs
assign S_AXI_RDATA = s_axi_rdata_c;
assign S_AXI_RLAST = s_axi_rlast_c;
assign S_AXI_RVALID = s_axi_rvalid_c;
assign S_AXI_RID = s_axi_rid_c;
assign S_AXI_RRESP = s_axi_rresp_c;
assign s_axi_rready_c = S_AXI_RREADY;
end
endgenerate
generate if (C_HAS_MEM_OUTPUT_REGS_B == 1) begin : has_regceb
assign regceb_c = s_axi_rvalid_c && s_axi_rready_c;
end
endgenerate
generate if (C_HAS_MEM_OUTPUT_REGS_B == 0) begin : no_regceb
assign regceb_c = REGCEB;
end
endgenerate
generate if (C_HAS_MUX_OUTPUT_REGS_B == 1) begin : only_core_op_regs
assign s_axi_payload_c = {s_axi_rid_c,s_axi_rdata_c,s_axi_rresp_c,s_axi_rlast_c};
assign S_AXI_RID = m_axi_payload_c[C_AXI_PAYLOAD-1 : C_AXI_PAYLOAD-C_AXI_ID_WIDTH];
assign S_AXI_RDATA = m_axi_payload_c[C_AXI_PAYLOAD-C_AXI_ID_WIDTH-1 : C_AXI_PAYLOAD-C_AXI_ID_WIDTH-C_WRITE_WIDTH_B];
assign S_AXI_RRESP = m_axi_payload_c[2:1];
assign S_AXI_RLAST = m_axi_payload_c[0];
end
endgenerate
generate if (C_HAS_MEM_OUTPUT_REGS_B == 1) begin : only_emb_op_regs
assign s_axi_payload_c = {s_axi_rid_c,s_axi_rresp_c,s_axi_rlast_c};
assign S_AXI_RDATA = s_axi_rdata_c;
assign S_AXI_RID = m_axi_payload_c[C_AXI_PAYLOAD-1 : C_AXI_PAYLOAD-C_AXI_ID_WIDTH];
assign S_AXI_RRESP = m_axi_payload_c[2:1];
assign S_AXI_RLAST = m_axi_payload_c[0];
end
endgenerate
generate if (C_HAS_MUX_OUTPUT_REGS_B == 1 || C_HAS_MEM_OUTPUT_REGS_B == 1) begin : has_regs_fwd
blk_mem_axi_regs_fwd_v8_2
#(.C_DATA_WIDTH (C_AXI_PAYLOAD))
axi_regs_inst (
.ACLK (S_ACLK),
.ARESET (s_aresetn_a_c),
.S_VALID (s_axi_rvalid_c),
.S_READY (s_axi_rready_c),
.S_PAYLOAD_DATA (s_axi_payload_c),
.M_VALID (S_AXI_RVALID),
.M_READY (S_AXI_RREADY),
.M_PAYLOAD_DATA (m_axi_payload_c)
);
end
endgenerate
generate if (C_INTERFACE_TYPE == 1) begin : axi_mem_module
assign s_aresetn_a_c = !S_ARESETN;
assign S_AXI_BRESP = 2'b00;
assign s_axi_rresp_c = 2'b00;
assign s_axi_arlen_c = (C_AXI_TYPE == 1)?S_AXI_ARLEN:8'h0;
blk_mem_axi_write_wrapper_beh_v8_2
#(.C_INTERFACE_TYPE (C_INTERFACE_TYPE),
.C_AXI_TYPE (C_AXI_TYPE),
.C_AXI_SLAVE_TYPE (C_AXI_SLAVE_TYPE),
.C_MEMORY_TYPE (C_MEM_TYPE),
.C_WRITE_DEPTH_A (C_WRITE_DEPTH_A),
.C_AXI_AWADDR_WIDTH ((AXI_FULL_MEMORY_SLAVE == 1)?C_AXI_ADDR_WIDTH:C_AXI_ADDR_WIDTH-C_AXI_ADDR_WIDTH_LSB),
.C_HAS_AXI_ID (C_HAS_AXI_ID),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH),
.C_AXI_WDATA_WIDTH (C_WRITE_WIDTH_A),
.C_AXI_OS_WR (C_AXI_OS_WR))
axi_wr_fsm (
// AXI Global Signals
.S_ACLK (S_ACLK),
.S_ARESETN (s_aresetn_a_c),
// AXI Full/Lite Slave Write interface
.S_AXI_AWADDR (S_AXI_AWADDR[C_AXI_ADDR_WIDTH_MSB-1:C_AXI_ADDR_WIDTH_LSB]),
.S_AXI_AWLEN (S_AXI_AWLEN),
.S_AXI_AWID (S_AXI_AWID),
.S_AXI_AWSIZE (S_AXI_AWSIZE),
.S_AXI_AWBURST (S_AXI_AWBURST),
.S_AXI_AWVALID (S_AXI_AWVALID),
.S_AXI_AWREADY (S_AXI_AWREADY),
.S_AXI_WVALID (S_AXI_WVALID),
.S_AXI_WREADY (S_AXI_WREADY),
.S_AXI_BVALID (S_AXI_BVALID),
.S_AXI_BREADY (S_AXI_BREADY),
.S_AXI_BID (S_AXI_BID),
// Signals for BRAM interfac(
.S_AXI_AWADDR_OUT (s_axi_awaddr_out_c),
.S_AXI_WR_EN (s_axi_wr_en_c)
);
blk_mem_axi_read_wrapper_beh_v8_2
#(.C_INTERFACE_TYPE (C_INTERFACE_TYPE),
.C_AXI_TYPE (C_AXI_TYPE),
.C_AXI_SLAVE_TYPE (C_AXI_SLAVE_TYPE),
.C_MEMORY_TYPE (C_MEM_TYPE),
.C_WRITE_WIDTH_A (C_WRITE_WIDTH_A),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH),
.C_AXI_PIPELINE_STAGES (1),
.C_AXI_ARADDR_WIDTH ((AXI_FULL_MEMORY_SLAVE == 1)?C_AXI_ADDR_WIDTH:C_AXI_ADDR_WIDTH-C_AXI_ADDR_WIDTH_LSB),
.C_HAS_AXI_ID (C_HAS_AXI_ID),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH))
axi_rd_sm(
//AXI Global Signals
.S_ACLK (S_ACLK),
.S_ARESETN (s_aresetn_a_c),
//AXI Full/Lite Read Side
.S_AXI_ARADDR (S_AXI_ARADDR[C_AXI_ADDR_WIDTH_MSB-1:C_AXI_ADDR_WIDTH_LSB]),
.S_AXI_ARLEN (s_axi_arlen_c),
.S_AXI_ARSIZE (S_AXI_ARSIZE),
.S_AXI_ARBURST (S_AXI_ARBURST),
.S_AXI_ARVALID (S_AXI_ARVALID),
.S_AXI_ARREADY (S_AXI_ARREADY),
.S_AXI_RLAST (s_axi_rlast_c),
.S_AXI_RVALID (s_axi_rvalid_c),
.S_AXI_RREADY (s_axi_rready_c),
.S_AXI_ARID (S_AXI_ARID),
.S_AXI_RID (s_axi_rid_c),
//AXI Full/Lite Read FSM Outputs
.S_AXI_ARADDR_OUT (s_axi_araddr_out_c),
.S_AXI_RD_EN (s_axi_rd_en_c)
);
BLK_MEM_GEN_v8_2_mem_module
#(.C_CORENAME (C_CORENAME),
.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_MEM_TYPE (C_MEM_TYPE),
.C_BYTE_SIZE (C_BYTE_SIZE),
.C_USE_BRAM_BLOCK (C_USE_BRAM_BLOCK),
.C_ALGORITHM (C_ALGORITHM),
.C_PRIM_TYPE (C_PRIM_TYPE),
.C_LOAD_INIT_FILE (C_LOAD_INIT_FILE),
.C_INIT_FILE_NAME (C_INIT_FILE_NAME),
.C_INIT_FILE (C_INIT_FILE),
.C_USE_DEFAULT_DATA (C_USE_DEFAULT_DATA),
.C_DEFAULT_DATA (C_DEFAULT_DATA),
.C_RST_TYPE ("SYNC"),
.C_HAS_RSTA (C_HAS_RSTA),
.C_RST_PRIORITY_A (C_RST_PRIORITY_A),
.C_RSTRAM_A (C_RSTRAM_A),
.C_INITA_VAL (C_INITA_VAL),
.C_HAS_ENA (1),
.C_HAS_REGCEA (C_HAS_REGCEA),
.C_USE_BYTE_WEA (1),
.C_WEA_WIDTH (C_WEA_WIDTH),
.C_WRITE_MODE_A (C_WRITE_MODE_A),
.C_WRITE_WIDTH_A (C_WRITE_WIDTH_A),
.C_READ_WIDTH_A (C_READ_WIDTH_A),
.C_WRITE_DEPTH_A (C_WRITE_DEPTH_A),
.C_READ_DEPTH_A (C_READ_DEPTH_A),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH),
.C_HAS_RSTB (C_HAS_RSTB),
.C_RST_PRIORITY_B (C_RST_PRIORITY_B),
.C_RSTRAM_B (C_RSTRAM_B),
.C_INITB_VAL (C_INITB_VAL),
.C_HAS_ENB (1),
.C_HAS_REGCEB (C_HAS_MEM_OUTPUT_REGS_B),
.C_USE_BYTE_WEB (1),
.C_WEB_WIDTH (C_WEB_WIDTH),
.C_WRITE_MODE_B (C_WRITE_MODE_B),
.C_WRITE_WIDTH_B (C_WRITE_WIDTH_B),
.C_READ_WIDTH_B (C_READ_WIDTH_B),
.C_WRITE_DEPTH_B (C_WRITE_DEPTH_B),
.C_READ_DEPTH_B (C_READ_DEPTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_MEM_OUTPUT_REGS_A (0),
.C_HAS_MEM_OUTPUT_REGS_B (C_HAS_MEM_OUTPUT_REGS_B),
.C_HAS_MUX_OUTPUT_REGS_A (0),
.C_HAS_MUX_OUTPUT_REGS_B (0),
.C_HAS_SOFTECC_INPUT_REGS_A (C_HAS_SOFTECC_INPUT_REGS_A),
.C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B),
.C_MUX_PIPELINE_STAGES (C_MUX_PIPELINE_STAGES),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.C_HAS_INJECTERR (C_HAS_INJECTERR),
.C_SIM_COLLISION_CHECK (C_SIM_COLLISION_CHECK),
.C_COMMON_CLK (C_COMMON_CLK),
.FLOP_DELAY (FLOP_DELAY),
.C_DISABLE_WARN_BHV_COLL (C_DISABLE_WARN_BHV_COLL),
.C_EN_ECC_PIPE (0),
.C_DISABLE_WARN_BHV_RANGE (C_DISABLE_WARN_BHV_RANGE))
blk_mem_gen_v8_2_inst
(.CLKA (S_ACLK),
.RSTA (s_aresetn_a_c),
.ENA (s_axi_wr_en_c),
.REGCEA (regcea_in),
.WEA (S_AXI_WSTRB),
.ADDRA (s_axi_awaddr_out_c),
.DINA (S_AXI_WDATA),
.DOUTA (DOUTA),
.CLKB (S_ACLK),
.RSTB (s_aresetn_a_c),
.ENB (s_axi_rd_en_c),
.REGCEB (regceb_c),
.WEB (WEB_parameterized),
.ADDRB (s_axi_araddr_out_c),
.DINB (DINB),
.DOUTB (s_axi_rdata_c),
.INJECTSBITERR (injectsbiterr_in),
.INJECTDBITERR (injectdbiterr_in),
.SBITERR (SBITERR),
.DBITERR (DBITERR),
.ECCPIPECE (1'b0),
.SLEEP (1'b0),
.RDADDRECC (RDADDRECC)
);
end
endgenerate
endmodule
|
/******************************************************************************
-- (c) Copyright 2006 - 2013 Xilinx, Inc. All rights reserved.
--
-- This file contains confidential and proprietary information
-- of Xilinx, Inc. and is protected under U.S. and
-- international copyright and other intellectual property
-- laws.
--
-- DISCLAIMER
-- This disclaimer is not a license and does not grant any
-- rights to the materials distributed herewith. Except as
-- otherwise provided in a valid license issued to you by
-- Xilinx, and to the maximum extent permitted by applicable
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-- (2) Xilinx shall not be liable (whether in contract or tort,
-- including negligence, or under any other theory of
-- liability) for any loss or damage of any kind or nature
-- related to, arising under or in connection with these
-- materials, including for any direct, or any indirect,
-- special, incidental, or consequential loss or damage
-- (including loss of data, profits, goodwill, or any type of
-- loss or damage suffered as a result of any action brought
-- by a third party) even if such damage or loss was
-- reasonably foreseeable or Xilinx had been advised of the
-- possibility of the same.
--
-- CRITICAL APPLICATIONS
-- Xilinx products are not designed or intended to be fail-
-- safe, or for use in any application requiring fail-safe
-- performance, such as life-support or safety devices or
-- systems, Class III medical devices, nuclear facilities,
-- applications related to the deployment of airbags, or any
-- other applications that could lead to death, personal
-- injury, or severe property or environmental damage
-- (individually and collectively, "Critical
-- Applications"). Customer assumes the sole risk and
-- liability of any use of Xilinx products in Critical
-- Applications, subject only to applicable laws and
-- regulations governing limitations on product liability.
--
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-- PART OF THIS FILE AT ALL TIMES.
--
*****************************************************************************
*
* Filename: BLK_MEM_GEN_v8_2.v
*
* Description:
* This file is the Verilog behvarial model for the
* Block Memory Generator Core.
*
*****************************************************************************
* Author: Xilinx
*
* History: Jan 11, 2006 Initial revision
* Jun 11, 2007 Added independent register stages for
* Port A and Port B (IP1_Jm/v2.5)
* Aug 28, 2007 Added mux pipeline stages feature (IP2_Jm/v2.6)
* Mar 13, 2008 Behavioral model optimizations
* April 07, 2009 : Added support for Spartan-6 and Virtex-6
* features, including the following:
* (i) error injection, detection and/or correction
* (ii) reset priority
* (iii) special reset behavior
*
*****************************************************************************/
`timescale 1ps/1ps
module STATE_LOGIC_v8_2 (O, I0, I1, I2, I3, I4, I5);
parameter INIT = 64'h0000000000000000;
input I0, I1, I2, I3, I4, I5;
output O;
reg O;
reg tmp;
always @( I5 or I4 or I3 or I2 or I1 or I0 ) begin
tmp = I0 ^ I1 ^ I2 ^ I3 ^ I4 ^ I5;
if ( tmp == 0 || tmp == 1)
O = INIT[{I5, I4, I3, I2, I1, I0}];
end
endmodule
module beh_vlog_muxf7_v8_2 (O, I0, I1, S);
output O;
reg O;
input I0, I1, S;
always @(I0 or I1 or S)
if (S)
O = I1;
else
O = I0;
endmodule
module beh_vlog_ff_clr_v8_2 (Q, C, CLR, D);
parameter INIT = 0;
localparam FLOP_DELAY = 100;
output Q;
input C, CLR, D;
reg Q;
initial Q= 1'b0;
always @(posedge C )
if (CLR)
Q<= 1'b0;
else
Q<= #FLOP_DELAY D;
endmodule
module beh_vlog_ff_pre_v8_2 (Q, C, D, PRE);
parameter INIT = 0;
localparam FLOP_DELAY = 100;
output Q;
input C, D, PRE;
reg Q;
initial Q= 1'b0;
always @(posedge C )
if (PRE)
Q <= 1'b1;
else
Q <= #FLOP_DELAY D;
endmodule
module beh_vlog_ff_ce_clr_v8_2 (Q, C, CE, CLR, D);
parameter INIT = 0;
localparam FLOP_DELAY = 100;
output Q;
input C, CE, CLR, D;
reg Q;
initial Q= 1'b0;
always @(posedge C )
if (CLR)
Q <= 1'b0;
else if (CE)
Q <= #FLOP_DELAY D;
endmodule
module write_netlist_v8_2
#(
parameter C_AXI_TYPE = 0
)
(
S_ACLK, S_ARESETN, S_AXI_AWVALID, S_AXI_WVALID, S_AXI_BREADY,
w_last_c, bready_timeout_c, aw_ready_r, S_AXI_WREADY, S_AXI_BVALID,
S_AXI_WR_EN, addr_en_c, incr_addr_c, bvalid_c
);
input S_ACLK;
input S_ARESETN;
input S_AXI_AWVALID;
input S_AXI_WVALID;
input S_AXI_BREADY;
input w_last_c;
input bready_timeout_c;
output aw_ready_r;
output S_AXI_WREADY;
output S_AXI_BVALID;
output S_AXI_WR_EN;
output addr_en_c;
output incr_addr_c;
output bvalid_c;
//-------------------------------------------------------------------------
//AXI LITE
//-------------------------------------------------------------------------
generate if (C_AXI_TYPE == 0 ) begin : gbeh_axi_lite_sm
wire w_ready_r_7;
wire w_ready_c;
wire aw_ready_c;
wire NlwRenamedSignal_bvalid_c;
wire NlwRenamedSignal_incr_addr_c;
wire present_state_FSM_FFd3_13;
wire present_state_FSM_FFd2_14;
wire present_state_FSM_FFd1_15;
wire present_state_FSM_FFd4_16;
wire present_state_FSM_FFd4_In;
wire present_state_FSM_FFd3_In;
wire present_state_FSM_FFd2_In;
wire present_state_FSM_FFd1_In;
wire present_state_FSM_FFd4_In1_21;
wire [0:0] Mmux_aw_ready_c ;
begin
assign
S_AXI_WREADY = w_ready_r_7,
S_AXI_BVALID = NlwRenamedSignal_incr_addr_c,
S_AXI_WR_EN = NlwRenamedSignal_bvalid_c,
incr_addr_c = NlwRenamedSignal_incr_addr_c,
bvalid_c = NlwRenamedSignal_bvalid_c;
assign NlwRenamedSignal_incr_addr_c = 1'b0;
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
aw_ready_r_2 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( aw_ready_c),
.Q ( aw_ready_r)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
w_ready_r (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( w_ready_c),
.Q ( w_ready_r_7)
);
beh_vlog_ff_pre_v8_2 #(
.INIT (1'b1))
present_state_FSM_FFd4 (
.C ( S_ACLK),
.D ( present_state_FSM_FFd4_In),
.PRE ( S_ARESETN),
.Q ( present_state_FSM_FFd4_16)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd3 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd3_In),
.Q ( present_state_FSM_FFd3_13)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd2 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd2_In),
.Q ( present_state_FSM_FFd2_14)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd1 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd1_In),
.Q ( present_state_FSM_FFd1_15)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000055554440))
present_state_FSM_FFd3_In1 (
.I0 ( S_AXI_WVALID),
.I1 ( S_AXI_AWVALID),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( present_state_FSM_FFd4_16),
.I4 ( present_state_FSM_FFd3_13),
.I5 (1'b0),
.O ( present_state_FSM_FFd3_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000088880800))
present_state_FSM_FFd2_In1 (
.I0 ( S_AXI_AWVALID),
.I1 ( S_AXI_WVALID),
.I2 ( bready_timeout_c),
.I3 ( present_state_FSM_FFd2_14),
.I4 ( present_state_FSM_FFd4_16),
.I5 (1'b0),
.O ( present_state_FSM_FFd2_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000AAAA2000))
Mmux_addr_en_c_0_1 (
.I0 ( S_AXI_AWVALID),
.I1 ( bready_timeout_c),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( S_AXI_WVALID),
.I4 ( present_state_FSM_FFd4_16),
.I5 (1'b0),
.O ( addr_en_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hF5F07570F5F05500))
Mmux_w_ready_c_0_1 (
.I0 ( S_AXI_WVALID),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd3_13),
.I4 ( present_state_FSM_FFd4_16),
.I5 ( present_state_FSM_FFd2_14),
.O ( w_ready_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h88808880FFFF8880))
present_state_FSM_FFd1_In1 (
.I0 ( S_AXI_WVALID),
.I1 ( bready_timeout_c),
.I2 ( present_state_FSM_FFd3_13),
.I3 ( present_state_FSM_FFd2_14),
.I4 ( present_state_FSM_FFd1_15),
.I5 ( S_AXI_BREADY),
.O ( present_state_FSM_FFd1_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000A8))
Mmux_S_AXI_WR_EN_0_1 (
.I0 ( S_AXI_WVALID),
.I1 ( present_state_FSM_FFd2_14),
.I2 ( present_state_FSM_FFd3_13),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( NlwRenamedSignal_bvalid_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h2F0F27072F0F2200))
present_state_FSM_FFd4_In1 (
.I0 ( S_AXI_WVALID),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd3_13),
.I4 ( present_state_FSM_FFd4_16),
.I5 ( present_state_FSM_FFd2_14),
.O ( present_state_FSM_FFd4_In1_21)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000F8))
present_state_FSM_FFd4_In2 (
.I0 ( present_state_FSM_FFd1_15),
.I1 ( S_AXI_BREADY),
.I2 ( present_state_FSM_FFd4_In1_21),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( present_state_FSM_FFd4_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h7535753575305500))
Mmux_aw_ready_c_0_1 (
.I0 ( S_AXI_AWVALID),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_WVALID),
.I3 ( present_state_FSM_FFd4_16),
.I4 ( present_state_FSM_FFd3_13),
.I5 ( present_state_FSM_FFd2_14),
.O ( Mmux_aw_ready_c[0])
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000F8))
Mmux_aw_ready_c_0_2 (
.I0 ( present_state_FSM_FFd1_15),
.I1 ( S_AXI_BREADY),
.I2 ( Mmux_aw_ready_c[0]),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( aw_ready_c)
);
end
end
endgenerate
//---------------------------------------------------------------------
// AXI FULL
//---------------------------------------------------------------------
generate if (C_AXI_TYPE == 1 ) begin : gbeh_axi_full_sm
wire w_ready_r_8;
wire w_ready_c;
wire aw_ready_c;
wire NlwRenamedSig_OI_bvalid_c;
wire present_state_FSM_FFd1_16;
wire present_state_FSM_FFd4_17;
wire present_state_FSM_FFd3_18;
wire present_state_FSM_FFd2_19;
wire present_state_FSM_FFd4_In;
wire present_state_FSM_FFd3_In;
wire present_state_FSM_FFd2_In;
wire present_state_FSM_FFd1_In;
wire present_state_FSM_FFd2_In1_24;
wire present_state_FSM_FFd4_In1_25;
wire N2;
wire N4;
begin
assign
S_AXI_WREADY = w_ready_r_8,
bvalid_c = NlwRenamedSig_OI_bvalid_c,
S_AXI_BVALID = 1'b0;
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
aw_ready_r_2
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( aw_ready_c),
.Q ( aw_ready_r)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
w_ready_r
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( w_ready_c),
.Q ( w_ready_r_8)
);
beh_vlog_ff_pre_v8_2 #(
.INIT (1'b1))
present_state_FSM_FFd4
(
.C ( S_ACLK),
.D ( present_state_FSM_FFd4_In),
.PRE ( S_ARESETN),
.Q ( present_state_FSM_FFd4_17)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd3
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd3_In),
.Q ( present_state_FSM_FFd3_18)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd2
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd2_In),
.Q ( present_state_FSM_FFd2_19)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd1
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd1_In),
.Q ( present_state_FSM_FFd1_16)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000005540))
present_state_FSM_FFd3_In1
(
.I0 ( S_AXI_WVALID),
.I1 ( present_state_FSM_FFd4_17),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd3_18),
.I4 (1'b0),
.I5 (1'b0),
.O ( present_state_FSM_FFd3_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hBF3FBB33AF0FAA00))
Mmux_aw_ready_c_0_2
(
.I0 ( S_AXI_BREADY),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd1_16),
.I4 ( present_state_FSM_FFd4_17),
.I5 ( NlwRenamedSig_OI_bvalid_c),
.O ( aw_ready_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hAAAAAAAA20000000))
Mmux_addr_en_c_0_1
(
.I0 ( S_AXI_AWVALID),
.I1 ( bready_timeout_c),
.I2 ( present_state_FSM_FFd2_19),
.I3 ( S_AXI_WVALID),
.I4 ( w_last_c),
.I5 ( present_state_FSM_FFd4_17),
.O ( addr_en_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000A8))
Mmux_S_AXI_WR_EN_0_1
(
.I0 ( S_AXI_WVALID),
.I1 ( present_state_FSM_FFd2_19),
.I2 ( present_state_FSM_FFd3_18),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( S_AXI_WR_EN)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000002220))
Mmux_incr_addr_c_0_1
(
.I0 ( S_AXI_WVALID),
.I1 ( w_last_c),
.I2 ( present_state_FSM_FFd2_19),
.I3 ( present_state_FSM_FFd3_18),
.I4 (1'b0),
.I5 (1'b0),
.O ( incr_addr_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000008880))
Mmux_aw_ready_c_0_11
(
.I0 ( S_AXI_WVALID),
.I1 ( w_last_c),
.I2 ( present_state_FSM_FFd2_19),
.I3 ( present_state_FSM_FFd3_18),
.I4 (1'b0),
.I5 (1'b0),
.O ( NlwRenamedSig_OI_bvalid_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h000000000000D5C0))
present_state_FSM_FFd2_In1
(
.I0 ( w_last_c),
.I1 ( S_AXI_AWVALID),
.I2 ( present_state_FSM_FFd4_17),
.I3 ( present_state_FSM_FFd3_18),
.I4 (1'b0),
.I5 (1'b0),
.O ( present_state_FSM_FFd2_In1_24)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hFFFFAAAA08AAAAAA))
present_state_FSM_FFd2_In2
(
.I0 ( present_state_FSM_FFd2_19),
.I1 ( S_AXI_AWVALID),
.I2 ( bready_timeout_c),
.I3 ( w_last_c),
.I4 ( S_AXI_WVALID),
.I5 ( present_state_FSM_FFd2_In1_24),
.O ( present_state_FSM_FFd2_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00C0004000C00000))
present_state_FSM_FFd4_In1
(
.I0 ( S_AXI_AWVALID),
.I1 ( w_last_c),
.I2 ( S_AXI_WVALID),
.I3 ( bready_timeout_c),
.I4 ( present_state_FSM_FFd3_18),
.I5 ( present_state_FSM_FFd2_19),
.O ( present_state_FSM_FFd4_In1_25)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000FFFF88F8))
present_state_FSM_FFd4_In2
(
.I0 ( present_state_FSM_FFd1_16),
.I1 ( S_AXI_BREADY),
.I2 ( present_state_FSM_FFd4_17),
.I3 ( S_AXI_AWVALID),
.I4 ( present_state_FSM_FFd4_In1_25),
.I5 (1'b0),
.O ( present_state_FSM_FFd4_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000007))
Mmux_w_ready_c_0_SW0
(
.I0 ( w_last_c),
.I1 ( S_AXI_WVALID),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( N2)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hFABAFABAFAAAF000))
Mmux_w_ready_c_0_Q
(
.I0 ( N2),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd4_17),
.I4 ( present_state_FSM_FFd3_18),
.I5 ( present_state_FSM_FFd2_19),
.O ( w_ready_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000008))
Mmux_aw_ready_c_0_11_SW0
(
.I0 ( bready_timeout_c),
.I1 ( S_AXI_WVALID),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( N4)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h88808880FFFF8880))
present_state_FSM_FFd1_In1
(
.I0 ( w_last_c),
.I1 ( N4),
.I2 ( present_state_FSM_FFd2_19),
.I3 ( present_state_FSM_FFd3_18),
.I4 ( present_state_FSM_FFd1_16),
.I5 ( S_AXI_BREADY),
.O ( present_state_FSM_FFd1_In)
);
end
end
endgenerate
endmodule
module read_netlist_v8_2 #(
parameter C_AXI_TYPE = 1,
parameter C_ADDRB_WIDTH = 12
) ( S_AXI_R_LAST_INT, S_ACLK, S_ARESETN, S_AXI_ARVALID,
S_AXI_RREADY,S_AXI_INCR_ADDR,S_AXI_ADDR_EN,
S_AXI_SINGLE_TRANS,S_AXI_MUX_SEL, S_AXI_R_LAST, S_AXI_ARREADY,
S_AXI_RLAST, S_AXI_RVALID, S_AXI_RD_EN, S_AXI_ARLEN);
input S_AXI_R_LAST_INT;
input S_ACLK;
input S_ARESETN;
input S_AXI_ARVALID;
input S_AXI_RREADY;
output S_AXI_INCR_ADDR;
output S_AXI_ADDR_EN;
output S_AXI_SINGLE_TRANS;
output S_AXI_MUX_SEL;
output S_AXI_R_LAST;
output S_AXI_ARREADY;
output S_AXI_RLAST;
output S_AXI_RVALID;
output S_AXI_RD_EN;
input [7:0] S_AXI_ARLEN;
wire present_state_FSM_FFd1_13 ;
wire present_state_FSM_FFd2_14 ;
wire gaxi_full_sm_outstanding_read_r_15 ;
wire gaxi_full_sm_ar_ready_r_16 ;
wire gaxi_full_sm_r_last_r_17 ;
wire NlwRenamedSig_OI_gaxi_full_sm_r_valid_r ;
wire gaxi_full_sm_r_valid_c ;
wire S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o ;
wire gaxi_full_sm_ar_ready_c ;
wire gaxi_full_sm_outstanding_read_c ;
wire NlwRenamedSig_OI_S_AXI_R_LAST ;
wire S_AXI_ARLEN_7_GND_8_o_equal_1_o ;
wire present_state_FSM_FFd2_In ;
wire present_state_FSM_FFd1_In ;
wire Mmux_S_AXI_R_LAST13 ;
wire N01 ;
wire N2 ;
wire Mmux_gaxi_full_sm_ar_ready_c11 ;
wire N4 ;
wire N8 ;
wire N9 ;
wire N10 ;
wire N11 ;
wire N12 ;
wire N13 ;
assign
S_AXI_R_LAST = NlwRenamedSig_OI_S_AXI_R_LAST,
S_AXI_ARREADY = gaxi_full_sm_ar_ready_r_16,
S_AXI_RLAST = gaxi_full_sm_r_last_r_17,
S_AXI_RVALID = NlwRenamedSig_OI_gaxi_full_sm_r_valid_r;
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
gaxi_full_sm_outstanding_read_r (
.C (S_ACLK),
.CLR(S_ARESETN),
.D(gaxi_full_sm_outstanding_read_c),
.Q(gaxi_full_sm_outstanding_read_r_15)
);
beh_vlog_ff_ce_clr_v8_2 #(
.INIT (1'b0))
gaxi_full_sm_r_valid_r (
.C (S_ACLK),
.CE (S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o),
.CLR (S_ARESETN),
.D (gaxi_full_sm_r_valid_c),
.Q (NlwRenamedSig_OI_gaxi_full_sm_r_valid_r)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
gaxi_full_sm_ar_ready_r (
.C (S_ACLK),
.CLR (S_ARESETN),
.D (gaxi_full_sm_ar_ready_c),
.Q (gaxi_full_sm_ar_ready_r_16)
);
beh_vlog_ff_ce_clr_v8_2 #(
.INIT(1'b0))
gaxi_full_sm_r_last_r (
.C (S_ACLK),
.CE (S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o),
.CLR (S_ARESETN),
.D (NlwRenamedSig_OI_S_AXI_R_LAST),
.Q (gaxi_full_sm_r_last_r_17)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd2 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd2_In),
.Q ( present_state_FSM_FFd2_14)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd1 (
.C (S_ACLK),
.CLR (S_ARESETN),
.D (present_state_FSM_FFd1_In),
.Q (present_state_FSM_FFd1_13)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h000000000000000B))
S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o1 (
.I0 ( S_AXI_RREADY),
.I1 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O (S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000008))
Mmux_S_AXI_SINGLE_TRANS11 (
.I0 (S_AXI_ARVALID),
.I1 (S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O (S_AXI_SINGLE_TRANS)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000004))
Mmux_S_AXI_ADDR_EN11 (
.I0 (present_state_FSM_FFd1_13),
.I1 (S_AXI_ARVALID),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O (S_AXI_ADDR_EN)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hECEE2022EEEE2022))
present_state_FSM_FFd2_In1 (
.I0 ( S_AXI_ARVALID),
.I1 ( present_state_FSM_FFd1_13),
.I2 ( S_AXI_RREADY),
.I3 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I4 ( present_state_FSM_FFd2_14),
.I5 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.O ( present_state_FSM_FFd2_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000044440444))
Mmux_S_AXI_R_LAST131 (
.I0 ( present_state_FSM_FFd1_13),
.I1 ( S_AXI_ARVALID),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I4 ( S_AXI_RREADY),
.I5 (1'b0),
.O ( Mmux_S_AXI_R_LAST13)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h4000FFFF40004000))
Mmux_S_AXI_INCR_ADDR11 (
.I0 ( S_AXI_R_LAST_INT),
.I1 ( S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( present_state_FSM_FFd1_13),
.I4 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I5 ( Mmux_S_AXI_R_LAST13),
.O ( S_AXI_INCR_ADDR)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000FE))
S_AXI_ARLEN_7_GND_8_o_equal_1_o_7_SW0 (
.I0 ( S_AXI_ARLEN[2]),
.I1 ( S_AXI_ARLEN[1]),
.I2 ( S_AXI_ARLEN[0]),
.I3 ( 1'b0),
.I4 ( 1'b0),
.I5 ( 1'b0),
.O ( N01)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000001))
S_AXI_ARLEN_7_GND_8_o_equal_1_o_7_Q (
.I0 ( S_AXI_ARLEN[7]),
.I1 ( S_AXI_ARLEN[6]),
.I2 ( S_AXI_ARLEN[5]),
.I3 ( S_AXI_ARLEN[4]),
.I4 ( S_AXI_ARLEN[3]),
.I5 ( N01),
.O ( S_AXI_ARLEN_7_GND_8_o_equal_1_o)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000007))
Mmux_gaxi_full_sm_outstanding_read_c1_SW0 (
.I0 ( S_AXI_ARVALID),
.I1 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I2 ( 1'b0),
.I3 ( 1'b0),
.I4 ( 1'b0),
.I5 ( 1'b0),
.O ( N2)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0020000002200200))
Mmux_gaxi_full_sm_outstanding_read_c1 (
.I0 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I1 ( S_AXI_RREADY),
.I2 ( present_state_FSM_FFd1_13),
.I3 ( present_state_FSM_FFd2_14),
.I4 ( gaxi_full_sm_outstanding_read_r_15),
.I5 ( N2),
.O ( gaxi_full_sm_outstanding_read_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000004555))
Mmux_gaxi_full_sm_ar_ready_c12 (
.I0 ( S_AXI_ARVALID),
.I1 ( S_AXI_RREADY),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I4 ( 1'b0),
.I5 ( 1'b0),
.O ( Mmux_gaxi_full_sm_ar_ready_c11)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000EF))
Mmux_S_AXI_R_LAST11_SW0 (
.I0 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I1 ( S_AXI_RREADY),
.I2 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I3 ( 1'b0),
.I4 ( 1'b0),
.I5 ( 1'b0),
.O ( N4)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hFCAAFC0A00AA000A))
Mmux_S_AXI_R_LAST11 (
.I0 ( S_AXI_ARVALID),
.I1 ( gaxi_full_sm_outstanding_read_r_15),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( present_state_FSM_FFd1_13),
.I4 ( N4),
.I5 ( S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o),
.O ( gaxi_full_sm_r_valid_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000AAAAAA08))
S_AXI_MUX_SEL1 (
.I0 (present_state_FSM_FFd1_13),
.I1 (NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I2 (S_AXI_RREADY),
.I3 (present_state_FSM_FFd2_14),
.I4 (gaxi_full_sm_outstanding_read_r_15),
.I5 (1'b0),
.O (S_AXI_MUX_SEL)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hF3F3F755A2A2A200))
Mmux_S_AXI_RD_EN11 (
.I0 ( present_state_FSM_FFd1_13),
.I1 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I2 ( S_AXI_RREADY),
.I3 ( gaxi_full_sm_outstanding_read_r_15),
.I4 ( present_state_FSM_FFd2_14),
.I5 ( S_AXI_ARVALID),
.O ( S_AXI_RD_EN)
);
beh_vlog_muxf7_v8_2 present_state_FSM_FFd1_In3 (
.I0 ( N8),
.I1 ( N9),
.S ( present_state_FSM_FFd1_13),
.O ( present_state_FSM_FFd1_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h000000005410F4F0))
present_state_FSM_FFd1_In3_F (
.I0 ( S_AXI_RREADY),
.I1 ( present_state_FSM_FFd2_14),
.I2 ( S_AXI_ARVALID),
.I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I4 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I5 ( 1'b0),
.O ( N8)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000072FF7272))
present_state_FSM_FFd1_In3_G (
.I0 ( present_state_FSM_FFd2_14),
.I1 ( S_AXI_R_LAST_INT),
.I2 ( gaxi_full_sm_outstanding_read_r_15),
.I3 ( S_AXI_RREADY),
.I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I5 ( 1'b0),
.O ( N9)
);
beh_vlog_muxf7_v8_2 Mmux_gaxi_full_sm_ar_ready_c14 (
.I0 ( N10),
.I1 ( N11),
.S ( present_state_FSM_FFd1_13),
.O ( gaxi_full_sm_ar_ready_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000FFFF88A8))
Mmux_gaxi_full_sm_ar_ready_c14_F (
.I0 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I1 ( S_AXI_RREADY),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I4 ( Mmux_gaxi_full_sm_ar_ready_c11),
.I5 ( 1'b0),
.O ( N10)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h000000008D008D8D))
Mmux_gaxi_full_sm_ar_ready_c14_G (
.I0 ( present_state_FSM_FFd2_14),
.I1 ( S_AXI_R_LAST_INT),
.I2 ( gaxi_full_sm_outstanding_read_r_15),
.I3 ( S_AXI_RREADY),
.I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I5 ( 1'b0),
.O ( N11)
);
beh_vlog_muxf7_v8_2 Mmux_S_AXI_R_LAST1 (
.I0 ( N12),
.I1 ( N13),
.S ( present_state_FSM_FFd1_13),
.O ( NlwRenamedSig_OI_S_AXI_R_LAST)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000088088888))
Mmux_S_AXI_R_LAST1_F (
.I0 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I1 ( S_AXI_ARVALID),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( S_AXI_RREADY),
.I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I5 ( 1'b0),
.O ( N12)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000E400E4E4))
Mmux_S_AXI_R_LAST1_G (
.I0 ( present_state_FSM_FFd2_14),
.I1 ( gaxi_full_sm_outstanding_read_r_15),
.I2 ( S_AXI_R_LAST_INT),
.I3 ( S_AXI_RREADY),
.I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I5 ( 1'b0),
.O ( N13)
);
endmodule
module blk_mem_axi_write_wrapper_beh_v8_2
# (
// AXI Interface related parameters start here
parameter C_INTERFACE_TYPE = 0, // 0: Native Interface; 1: AXI Interface
parameter C_AXI_TYPE = 0, // 0: AXI Lite; 1: AXI Full;
parameter C_AXI_SLAVE_TYPE = 0, // 0: MEMORY SLAVE; 1: PERIPHERAL SLAVE;
parameter C_MEMORY_TYPE = 0, // 0: SP-RAM, 1: SDP-RAM; 2: TDP-RAM; 3: DP-ROM;
parameter C_WRITE_DEPTH_A = 0,
parameter C_AXI_AWADDR_WIDTH = 32,
parameter C_ADDRA_WIDTH = 12,
parameter C_AXI_WDATA_WIDTH = 32,
parameter C_HAS_AXI_ID = 0,
parameter C_AXI_ID_WIDTH = 4,
// AXI OUTSTANDING WRITES
parameter C_AXI_OS_WR = 2
)
(
// AXI Global Signals
input S_ACLK,
input S_ARESETN,
// AXI Full/Lite Slave Write Channel (write side)
input [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input [C_AXI_AWADDR_WIDTH-1:0] S_AXI_AWADDR,
input [8-1:0] S_AXI_AWLEN,
input [2:0] S_AXI_AWSIZE,
input [1:0] S_AXI_AWBURST,
input S_AXI_AWVALID,
output S_AXI_AWREADY,
input S_AXI_WVALID,
output S_AXI_WREADY,
output reg [C_AXI_ID_WIDTH-1:0] S_AXI_BID = 0,
output S_AXI_BVALID,
input S_AXI_BREADY,
// Signals for BMG interface
output [C_ADDRA_WIDTH-1:0] S_AXI_AWADDR_OUT,
output S_AXI_WR_EN
);
localparam FLOP_DELAY = 100; // 100 ps
localparam C_RANGE = ((C_AXI_WDATA_WIDTH == 8)?0:
((C_AXI_WDATA_WIDTH==16)?1:
((C_AXI_WDATA_WIDTH==32)?2:
((C_AXI_WDATA_WIDTH==64)?3:
((C_AXI_WDATA_WIDTH==128)?4:
((C_AXI_WDATA_WIDTH==256)?5:0))))));
wire bvalid_c ;
reg bready_timeout_c = 0;
wire [1:0] bvalid_rd_cnt_c;
reg bvalid_r = 0;
reg [2:0] bvalid_count_r = 0;
reg [((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?
C_AXI_AWADDR_WIDTH:C_ADDRA_WIDTH)-1:0] awaddr_reg = 0;
reg [1:0] bvalid_wr_cnt_r = 0;
reg [1:0] bvalid_rd_cnt_r = 0;
wire w_last_c ;
wire addr_en_c ;
wire incr_addr_c ;
wire aw_ready_r ;
wire dec_alen_c ;
reg bvalid_d1_c = 0;
reg [7:0] awlen_cntr_r = 0;
reg [7:0] awlen_int = 0;
reg [1:0] awburst_int = 0;
integer total_bytes = 0;
integer wrap_boundary = 0;
integer wrap_base_addr = 0;
integer num_of_bytes_c = 0;
integer num_of_bytes_r = 0;
// Array to store BIDs
reg [C_AXI_ID_WIDTH-1:0] axi_bid_array[3:0] ;
wire S_AXI_BVALID_axi_wr_fsm;
//-------------------------------------
//AXI WRITE FSM COMPONENT INSTANTIATION
//-------------------------------------
write_netlist_v8_2 #(.C_AXI_TYPE(C_AXI_TYPE)) axi_wr_fsm
(
.S_ACLK(S_ACLK),
.S_ARESETN(S_ARESETN),
.S_AXI_AWVALID(S_AXI_AWVALID),
.aw_ready_r(aw_ready_r),
.S_AXI_WVALID(S_AXI_WVALID),
.S_AXI_WREADY(S_AXI_WREADY),
.S_AXI_BREADY(S_AXI_BREADY),
.S_AXI_WR_EN(S_AXI_WR_EN),
.w_last_c(w_last_c),
.bready_timeout_c(bready_timeout_c),
.addr_en_c(addr_en_c),
.incr_addr_c(incr_addr_c),
.bvalid_c(bvalid_c),
.S_AXI_BVALID (S_AXI_BVALID_axi_wr_fsm)
);
//Wrap Address boundary calculation
always@(*) begin
num_of_bytes_c = 2**((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_AWSIZE:0);
total_bytes = (num_of_bytes_r)*(awlen_int+1);
wrap_base_addr = ((awaddr_reg)/((total_bytes==0)?1:total_bytes))*(total_bytes);
wrap_boundary = wrap_base_addr+total_bytes;
end
//-------------------------------------------------------------------------
// BMG address generation
//-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
awaddr_reg <= 0;
num_of_bytes_r <= 0;
awburst_int <= 0;
end else begin
if (addr_en_c == 1'b1) begin
awaddr_reg <= #FLOP_DELAY S_AXI_AWADDR ;
num_of_bytes_r <= num_of_bytes_c;
awburst_int <= ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_AWBURST:2'b01);
end else if (incr_addr_c == 1'b1) begin
if (awburst_int == 2'b10) begin
if(awaddr_reg == (wrap_boundary-num_of_bytes_r)) begin
awaddr_reg <= wrap_base_addr;
end else begin
awaddr_reg <= awaddr_reg + num_of_bytes_r;
end
end else if (awburst_int == 2'b01 || awburst_int == 2'b11) begin
awaddr_reg <= awaddr_reg + num_of_bytes_r;
end
end
end
end
assign S_AXI_AWADDR_OUT = ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?
awaddr_reg[C_AXI_AWADDR_WIDTH-1:C_RANGE]:awaddr_reg);
//-------------------------------------------------------------------------
// AXI wlast generation
//-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
awlen_cntr_r <= 0;
awlen_int <= 0;
end else begin
if (addr_en_c == 1'b1) begin
awlen_int <= #FLOP_DELAY (C_AXI_TYPE == 0?0:S_AXI_AWLEN) ;
awlen_cntr_r <= #FLOP_DELAY (C_AXI_TYPE == 0?0:S_AXI_AWLEN) ;
end else if (dec_alen_c == 1'b1) begin
awlen_cntr_r <= #FLOP_DELAY awlen_cntr_r - 1 ;
end
end
end
assign w_last_c = (awlen_cntr_r == 0 && S_AXI_WVALID == 1'b1)?1'b1:1'b0;
assign dec_alen_c = (incr_addr_c | w_last_c);
//-------------------------------------------------------------------------
// Generation of bvalid counter for outstanding transactions
//-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
bvalid_count_r <= 0;
end else begin
// bvalid_count_r generation
if (bvalid_c == 1'b1 && bvalid_r == 1'b1 && S_AXI_BREADY == 1'b1) begin
bvalid_count_r <= #FLOP_DELAY bvalid_count_r ;
end else if (bvalid_c == 1'b1) begin
bvalid_count_r <= #FLOP_DELAY bvalid_count_r + 1 ;
end else if (bvalid_r == 1'b1 && S_AXI_BREADY == 1'b1 && bvalid_count_r != 0) begin
bvalid_count_r <= #FLOP_DELAY bvalid_count_r - 1 ;
end
end
end
//-------------------------------------------------------------------------
// Generation of bvalid when BID is used
//-------------------------------------------------------------------------
generate if (C_HAS_AXI_ID == 1) begin:gaxi_bvalid_id_r
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
bvalid_r <= 0;
bvalid_d1_c <= 0;
end else begin
// Delay the generation o bvalid_r for generation for BID
bvalid_d1_c <= bvalid_c;
//external bvalid signal generation
if (bvalid_d1_c == 1'b1) begin
bvalid_r <= #FLOP_DELAY 1'b1 ;
end else if (bvalid_count_r <= 1 && S_AXI_BREADY == 1'b1) begin
bvalid_r <= #FLOP_DELAY 0 ;
end
end
end
end
endgenerate
//-------------------------------------------------------------------------
// Generation of bvalid when BID is not used
//-------------------------------------------------------------------------
generate if(C_HAS_AXI_ID == 0) begin:gaxi_bvalid_noid_r
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
bvalid_r <= 0;
end else begin
//external bvalid signal generation
if (bvalid_c == 1'b1) begin
bvalid_r <= #FLOP_DELAY 1'b1 ;
end else if (bvalid_count_r <= 1 && S_AXI_BREADY == 1'b1) begin
bvalid_r <= #FLOP_DELAY 0 ;
end
end
end
end
endgenerate
//-------------------------------------------------------------------------
// Generation of Bready timeout
//-------------------------------------------------------------------------
always @(bvalid_count_r) begin
// bready_timeout_c generation
if(bvalid_count_r == C_AXI_OS_WR-1) begin
bready_timeout_c <= 1'b1;
end else begin
bready_timeout_c <= 1'b0;
end
end
//-------------------------------------------------------------------------
// Generation of BID
//-------------------------------------------------------------------------
generate if(C_HAS_AXI_ID == 1) begin:gaxi_bid_gen
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
bvalid_wr_cnt_r <= 0;
bvalid_rd_cnt_r <= 0;
end else begin
// STORE AWID IN AN ARRAY
if(bvalid_c == 1'b1) begin
bvalid_wr_cnt_r <= bvalid_wr_cnt_r + 1;
end
// generate BID FROM AWID ARRAY
bvalid_rd_cnt_r <= #FLOP_DELAY bvalid_rd_cnt_c ;
S_AXI_BID <= axi_bid_array[bvalid_rd_cnt_c];
end
end
assign bvalid_rd_cnt_c = (bvalid_r == 1'b1 && S_AXI_BREADY == 1'b1)?bvalid_rd_cnt_r+1:bvalid_rd_cnt_r;
//-------------------------------------------------------------------------
// Storing AWID for generation of BID
//-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if(S_ARESETN == 1'b1) begin
axi_bid_array[0] = 0;
axi_bid_array[1] = 0;
axi_bid_array[2] = 0;
axi_bid_array[3] = 0;
end else if(aw_ready_r == 1'b1 && S_AXI_AWVALID == 1'b1) begin
axi_bid_array[bvalid_wr_cnt_r] <= S_AXI_AWID;
end
end
end
endgenerate
assign S_AXI_BVALID = bvalid_r;
assign S_AXI_AWREADY = aw_ready_r;
endmodule
module blk_mem_axi_read_wrapper_beh_v8_2
# (
//// AXI Interface related parameters start here
parameter C_INTERFACE_TYPE = 0,
parameter C_AXI_TYPE = 0,
parameter C_AXI_SLAVE_TYPE = 0,
parameter C_MEMORY_TYPE = 0,
parameter C_WRITE_WIDTH_A = 4,
parameter C_WRITE_DEPTH_A = 32,
parameter C_ADDRA_WIDTH = 12,
parameter C_AXI_PIPELINE_STAGES = 0,
parameter C_AXI_ARADDR_WIDTH = 12,
parameter C_HAS_AXI_ID = 0,
parameter C_AXI_ID_WIDTH = 4,
parameter C_ADDRB_WIDTH = 12
)
(
//// AXI Global Signals
input S_ACLK,
input S_ARESETN,
//// AXI Full/Lite Slave Read (Read side)
input [C_AXI_ARADDR_WIDTH-1:0] S_AXI_ARADDR,
input [7:0] S_AXI_ARLEN,
input [2:0] S_AXI_ARSIZE,
input [1:0] S_AXI_ARBURST,
input S_AXI_ARVALID,
output S_AXI_ARREADY,
output S_AXI_RLAST,
output S_AXI_RVALID,
input S_AXI_RREADY,
input [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
output reg [C_AXI_ID_WIDTH-1:0] S_AXI_RID = 0,
//// AXI Full/Lite Read Address Signals to BRAM
output [C_ADDRB_WIDTH-1:0] S_AXI_ARADDR_OUT,
output S_AXI_RD_EN
);
localparam FLOP_DELAY = 100; // 100 ps
localparam C_RANGE = ((C_WRITE_WIDTH_A == 8)?0:
((C_WRITE_WIDTH_A==16)?1:
((C_WRITE_WIDTH_A==32)?2:
((C_WRITE_WIDTH_A==64)?3:
((C_WRITE_WIDTH_A==128)?4:
((C_WRITE_WIDTH_A==256)?5:0))))));
reg [C_AXI_ID_WIDTH-1:0] ar_id_r=0;
wire addr_en_c;
wire rd_en_c;
wire incr_addr_c;
wire single_trans_c;
wire dec_alen_c;
wire mux_sel_c;
wire r_last_c;
wire r_last_int_c;
wire [C_ADDRB_WIDTH-1 : 0] araddr_out;
reg [7:0] arlen_int_r=0;
reg [7:0] arlen_cntr=8'h01;
reg [1:0] arburst_int_c=0;
reg [1:0] arburst_int_r=0;
reg [((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?
C_AXI_ARADDR_WIDTH:C_ADDRA_WIDTH)-1:0] araddr_reg =0;
integer num_of_bytes_c = 0;
integer total_bytes = 0;
integer num_of_bytes_r = 0;
integer wrap_base_addr_r = 0;
integer wrap_boundary_r = 0;
reg [7:0] arlen_int_c=0;
integer total_bytes_c = 0;
integer wrap_base_addr_c = 0;
integer wrap_boundary_c = 0;
assign dec_alen_c = incr_addr_c | r_last_int_c;
read_netlist_v8_2
#(.C_AXI_TYPE (1),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH))
axi_read_fsm (
.S_AXI_INCR_ADDR(incr_addr_c),
.S_AXI_ADDR_EN(addr_en_c),
.S_AXI_SINGLE_TRANS(single_trans_c),
.S_AXI_MUX_SEL(mux_sel_c),
.S_AXI_R_LAST(r_last_c),
.S_AXI_R_LAST_INT(r_last_int_c),
//// AXI Global Signals
.S_ACLK(S_ACLK),
.S_ARESETN(S_ARESETN),
//// AXI Full/Lite Slave Read (Read side)
.S_AXI_ARLEN(S_AXI_ARLEN),
.S_AXI_ARVALID(S_AXI_ARVALID),
.S_AXI_ARREADY(S_AXI_ARREADY),
.S_AXI_RLAST(S_AXI_RLAST),
.S_AXI_RVALID(S_AXI_RVALID),
.S_AXI_RREADY(S_AXI_RREADY),
//// AXI Full/Lite Read Address Signals to BRAM
.S_AXI_RD_EN(rd_en_c)
);
always@(*) begin
num_of_bytes_c = 2**((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_ARSIZE:0);
total_bytes = (num_of_bytes_r)*(arlen_int_r+1);
wrap_base_addr_r = ((araddr_reg)/(total_bytes==0?1:total_bytes))*(total_bytes);
wrap_boundary_r = wrap_base_addr_r+total_bytes;
//////// combinatorial from interface
arlen_int_c = (C_AXI_TYPE == 0?0:S_AXI_ARLEN);
total_bytes_c = (num_of_bytes_c)*(arlen_int_c+1);
wrap_base_addr_c = ((S_AXI_ARADDR)/(total_bytes_c==0?1:total_bytes_c))*(total_bytes_c);
wrap_boundary_c = wrap_base_addr_c+total_bytes_c;
arburst_int_c = ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_ARBURST:1);
end
////-------------------------------------------------------------------------
//// BMG address generation
////-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
araddr_reg <= 0;
arburst_int_r <= 0;
num_of_bytes_r <= 0;
end else begin
if (incr_addr_c == 1'b1 && addr_en_c == 1'b1 && single_trans_c == 1'b0) begin
arburst_int_r <= arburst_int_c;
num_of_bytes_r <= num_of_bytes_c;
if (arburst_int_c == 2'b10) begin
if(S_AXI_ARADDR == (wrap_boundary_c-num_of_bytes_c)) begin
araddr_reg <= wrap_base_addr_c;
end else begin
araddr_reg <= S_AXI_ARADDR + num_of_bytes_c;
end
end else if (arburst_int_c == 2'b01 || arburst_int_c == 2'b11) begin
araddr_reg <= S_AXI_ARADDR + num_of_bytes_c;
end
end else if (addr_en_c == 1'b1) begin
araddr_reg <= S_AXI_ARADDR;
num_of_bytes_r <= num_of_bytes_c;
arburst_int_r <= arburst_int_c;
end else if (incr_addr_c == 1'b1) begin
if (arburst_int_r == 2'b10) begin
if(araddr_reg == (wrap_boundary_r-num_of_bytes_r)) begin
araddr_reg <= wrap_base_addr_r;
end else begin
araddr_reg <= araddr_reg + num_of_bytes_r;
end
end else if (arburst_int_r == 2'b01 || arburst_int_r == 2'b11) begin
araddr_reg <= araddr_reg + num_of_bytes_r;
end
end
end
end
assign araddr_out = ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?araddr_reg[C_AXI_ARADDR_WIDTH-1:C_RANGE]:araddr_reg);
////-----------------------------------------------------------------------
//// Counter to generate r_last_int_c from registered ARLEN - AXI FULL FSM
////-----------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
arlen_cntr <= 8'h01;
arlen_int_r <= 0;
end else begin
if (addr_en_c == 1'b1 && dec_alen_c == 1'b1 && single_trans_c == 1'b0) begin
arlen_int_r <= (C_AXI_TYPE == 0?0:S_AXI_ARLEN) ;
arlen_cntr <= S_AXI_ARLEN - 1'b1;
end else if (addr_en_c == 1'b1) begin
arlen_int_r <= (C_AXI_TYPE == 0?0:S_AXI_ARLEN) ;
arlen_cntr <= (C_AXI_TYPE == 0?0:S_AXI_ARLEN) ;
end else if (dec_alen_c == 1'b1) begin
arlen_cntr <= arlen_cntr - 1'b1 ;
end
else begin
arlen_cntr <= arlen_cntr;
end
end
end
assign r_last_int_c = (arlen_cntr == 0 && S_AXI_RREADY == 1'b1)?1'b1:1'b0;
////------------------------------------------------------------------------
//// AXI FULL FSM
//// Mux Selection of ARADDR
//// ARADDR is driven out from the read fsm based on the mux_sel_c
//// Based on mux_sel either ARADDR is given out or the latched ARADDR is
//// given out to BRAM
////------------------------------------------------------------------------
assign S_AXI_ARADDR_OUT = (mux_sel_c == 1'b0)?((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_ARADDR[C_AXI_ARADDR_WIDTH-1:C_RANGE]:S_AXI_ARADDR):araddr_out;
////------------------------------------------------------------------------
//// Assign output signals - AXI FULL FSM
////------------------------------------------------------------------------
assign S_AXI_RD_EN = rd_en_c;
generate if (C_HAS_AXI_ID == 1) begin:gaxi_bvalid_id_r
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
S_AXI_RID <= 0;
ar_id_r <= 0;
end else begin
if (addr_en_c == 1'b1 && rd_en_c == 1'b1) begin
S_AXI_RID <= S_AXI_ARID;
ar_id_r <= S_AXI_ARID;
end else if (addr_en_c == 1'b1 && rd_en_c == 1'b0) begin
ar_id_r <= S_AXI_ARID;
end else if (rd_en_c == 1'b1) begin
S_AXI_RID <= ar_id_r;
end
end
end
end
endgenerate
endmodule
module blk_mem_axi_regs_fwd_v8_2
#(parameter C_DATA_WIDTH = 8
)(
input ACLK,
input ARESET,
input S_VALID,
output S_READY,
input [C_DATA_WIDTH-1:0] S_PAYLOAD_DATA,
output M_VALID,
input M_READY,
output reg [C_DATA_WIDTH-1:0] M_PAYLOAD_DATA
);
reg [C_DATA_WIDTH-1:0] STORAGE_DATA;
wire S_READY_I;
reg M_VALID_I;
reg [1:0] ARESET_D;
//assign local signal to its output signal
assign S_READY = S_READY_I;
assign M_VALID = M_VALID_I;
always @(posedge ACLK) begin
ARESET_D <= {ARESET_D[0], ARESET};
end
//Save payload data whenever we have a transaction on the slave side
always @(posedge ACLK or ARESET) begin
if (ARESET == 1'b1) begin
STORAGE_DATA <= 0;
end else begin
if(S_VALID == 1'b1 && S_READY_I == 1'b1 ) begin
STORAGE_DATA <= S_PAYLOAD_DATA;
end
end
end
always @(posedge ACLK) begin
M_PAYLOAD_DATA = STORAGE_DATA;
end
//M_Valid set to high when we have a completed transfer on slave side
//Is removed on a M_READY except if we have a new transfer on the slave side
always @(posedge ACLK or ARESET_D) begin
if (ARESET_D != 2'b00) begin
M_VALID_I <= 1'b0;
end else begin
if (S_VALID == 1'b1) begin
//Always set M_VALID_I when slave side is valid
M_VALID_I <= 1'b1;
end else if (M_READY == 1'b1 ) begin
//Clear (or keep) when no slave side is valid but master side is ready
M_VALID_I <= 1'b0;
end
end
end
//Slave Ready is either when Master side drives M_READY or we have space in our storage data
assign S_READY_I = (M_READY || (!M_VALID_I)) && !(|(ARESET_D));
endmodule
//*****************************************************************************
// Output Register Stage module
//
// This module builds the output register stages of the memory. This module is
// instantiated in the main memory module (BLK_MEM_GEN_v8_2) which is
// declared/implemented further down in this file.
//*****************************************************************************
module BLK_MEM_GEN_v8_2_output_stage
#(parameter C_FAMILY = "virtex7",
parameter C_XDEVICEFAMILY = "virtex7",
parameter C_RST_TYPE = "SYNC",
parameter C_HAS_RST = 0,
parameter C_RSTRAM = 0,
parameter C_RST_PRIORITY = "CE",
parameter C_INIT_VAL = "0",
parameter C_HAS_EN = 0,
parameter C_HAS_REGCE = 0,
parameter C_DATA_WIDTH = 32,
parameter C_ADDRB_WIDTH = 10,
parameter C_HAS_MEM_OUTPUT_REGS = 0,
parameter C_USE_SOFTECC = 0,
parameter C_USE_ECC = 0,
parameter NUM_STAGES = 1,
parameter C_EN_ECC_PIPE = 0,
parameter FLOP_DELAY = 100
)
(
input CLK,
input RST,
input EN,
input REGCE,
input [C_DATA_WIDTH-1:0] DIN_I,
output reg [C_DATA_WIDTH-1:0] DOUT,
input SBITERR_IN_I,
input DBITERR_IN_I,
output reg SBITERR,
output reg DBITERR,
input [C_ADDRB_WIDTH-1:0] RDADDRECC_IN_I,
input ECCPIPECE,
output reg [C_ADDRB_WIDTH-1:0] RDADDRECC
);
//******************************
// Port and Generic Definitions
//******************************
//////////////////////////////////////////////////////////////////////////
// Generic Definitions
//////////////////////////////////////////////////////////////////////////
// C_FAMILY,C_XDEVICEFAMILY: Designates architecture targeted. The following
// options are available - "spartan3", "spartan6",
// "virtex4", "virtex5", "virtex6" and "virtex6l".
// C_RST_TYPE : Type of reset - Synchronous or Asynchronous
// C_HAS_RST : Determines the presence of the RST port
// C_RSTRAM : Determines if special reset behavior is used
// C_RST_PRIORITY : Determines the priority between CE and SR
// C_INIT_VAL : Initialization value
// C_HAS_EN : Determines the presence of the EN port
// C_HAS_REGCE : Determines the presence of the REGCE port
// C_DATA_WIDTH : Memory write/read width
// C_ADDRB_WIDTH : Width of the ADDRB input port
// C_HAS_MEM_OUTPUT_REGS : Designates the use of a register at the output
// of the RAM primitive
// C_USE_SOFTECC : Determines if the Soft ECC feature is used or
// not. Only applicable Spartan-6
// C_USE_ECC : Determines if the ECC feature is used or
// not. Only applicable for V5 and V6
// NUM_STAGES : Determines the number of output stages
// FLOP_DELAY : Constant delay for register assignments
//////////////////////////////////////////////////////////////////////////
// Port Definitions
//////////////////////////////////////////////////////////////////////////
// CLK : Clock to synchronize all read and write operations
// RST : Reset input to reset memory outputs to a user-defined
// reset state
// EN : Enable all read and write operations
// REGCE : Register Clock Enable to control each pipeline output
// register stages
// DIN : Data input to the Output stage.
// DOUT : Final Data output
// SBITERR_IN : SBITERR input signal to the Output stage.
// SBITERR : Final SBITERR Output signal.
// DBITERR_IN : DBITERR input signal to the Output stage.
// DBITERR : Final DBITERR Output signal.
// RDADDRECC_IN : RDADDRECC input signal to the Output stage.
// RDADDRECC : Final RDADDRECC Output signal.
//////////////////////////////////////////////////////////////////////////
// Fix for CR-509792
localparam REG_STAGES = (NUM_STAGES < 2) ? 1 : NUM_STAGES-1;
// Declare the pipeline registers
// (includes mem output reg, mux pipeline stages, and mux output reg)
reg [C_DATA_WIDTH*REG_STAGES-1:0] out_regs;
reg [C_ADDRB_WIDTH*REG_STAGES-1:0] rdaddrecc_regs;
reg [REG_STAGES-1:0] sbiterr_regs;
reg [REG_STAGES-1:0] dbiterr_regs;
reg [C_DATA_WIDTH*8-1:0] init_str = C_INIT_VAL;
reg [C_DATA_WIDTH-1:0] init_val ;
//*********************************************
// Wire off optional inputs based on parameters
//*********************************************
wire en_i;
wire regce_i;
wire rst_i;
// Internal signals
reg [C_DATA_WIDTH-1:0] DIN;
reg [C_ADDRB_WIDTH-1:0] RDADDRECC_IN;
reg SBITERR_IN;
reg DBITERR_IN;
// Internal enable for output registers is tied to user EN or '1' depending
// on parameters
assign en_i = (C_HAS_EN==0 || EN);
// Internal register enable for output registers is tied to user REGCE, EN or
// '1' depending on parameters
// For V4 ECC, REGCE is always 1
// Virtex-4 ECC Not Yet Supported
assign regce_i = ((C_HAS_REGCE==1) && REGCE) ||
((C_HAS_REGCE==0) && (C_HAS_EN==0 || EN));
//Internal SRR is tied to user RST or '0' depending on parameters
assign rst_i = (C_HAS_RST==1) && RST;
//****************************************************
// Power on: load up the output registers and latches
//****************************************************
initial begin
if (!($sscanf(init_str, "%h", init_val))) begin
init_val = 0;
end
DOUT = init_val;
RDADDRECC = 0;
SBITERR = 1'b0;
DBITERR = 1'b0;
DIN = {(C_DATA_WIDTH){1'b0}};
RDADDRECC_IN = 0;
SBITERR_IN = 0;
DBITERR_IN = 0;
// This will be one wider than need, but 0 is an error
out_regs = {(REG_STAGES+1){init_val}};
rdaddrecc_regs = 0;
sbiterr_regs = {(REG_STAGES+1){1'b0}};
dbiterr_regs = {(REG_STAGES+1){1'b0}};
end
//***********************************************
// NUM_STAGES = 0 (No output registers. RAM only)
//***********************************************
generate if (NUM_STAGES == 0) begin : zero_stages
always @* begin
DOUT = DIN;
RDADDRECC = RDADDRECC_IN;
SBITERR = SBITERR_IN;
DBITERR = DBITERR_IN;
end
end
endgenerate
generate if (C_EN_ECC_PIPE == 0) begin : no_ecc_pipe_reg
always @* begin
DIN = DIN_I;
SBITERR_IN = SBITERR_IN_I;
DBITERR_IN = DBITERR_IN_I;
RDADDRECC_IN = RDADDRECC_IN_I;
end
end
endgenerate
generate if (C_EN_ECC_PIPE == 1) begin : with_ecc_pipe_reg
always @(posedge CLK) begin
if(ECCPIPECE == 1) begin
DIN <= #FLOP_DELAY DIN_I;
SBITERR_IN <= #FLOP_DELAY SBITERR_IN_I;
DBITERR_IN <= #FLOP_DELAY DBITERR_IN_I;
RDADDRECC_IN <= #FLOP_DELAY RDADDRECC_IN_I;
end
end
end
endgenerate
//***********************************************
// NUM_STAGES = 1
// (Mem Output Reg only or Mux Output Reg only)
//***********************************************
// Possible valid combinations:
// Note: C_HAS_MUX_OUTPUT_REGS_*=0 when (C_RSTRAM_*=1)
// +-----------------------------------------+
// | C_RSTRAM_* | Reset Behavior |
// +----------------+------------------------+
// | 0 | Normal Behavior |
// +----------------+------------------------+
// | 1 | Special Behavior |
// +----------------+------------------------+
//
// Normal = REGCE gates reset, as in the case of all families except S3ADSP.
// Special = EN gates reset, as in the case of S3ADSP.
generate if (NUM_STAGES == 1 &&
(C_RSTRAM == 0 || (C_RSTRAM == 1 && (C_XDEVICEFAMILY != "spartan3adsp" && C_XDEVICEFAMILY != "aspartan3adsp" )) ||
C_HAS_MEM_OUTPUT_REGS == 0 || C_HAS_RST == 0))
begin : one_stages_norm
always @(posedge CLK) begin
if (C_RST_PRIORITY == "CE") begin //REGCE has priority
if (regce_i && rst_i) begin
DOUT <= #FLOP_DELAY init_val;
RDADDRECC <= #FLOP_DELAY 0;
SBITERR <= #FLOP_DELAY 1'b0;
DBITERR <= #FLOP_DELAY 1'b0;
end else if (regce_i) begin
DOUT <= #FLOP_DELAY DIN;
RDADDRECC <= #FLOP_DELAY RDADDRECC_IN;
SBITERR <= #FLOP_DELAY SBITERR_IN;
DBITERR <= #FLOP_DELAY DBITERR_IN;
end //Output signal assignments
end else begin //RST has priority
if (rst_i) begin
DOUT <= #FLOP_DELAY init_val;
RDADDRECC <= #FLOP_DELAY RDADDRECC_IN;
SBITERR <= #FLOP_DELAY 1'b0;
DBITERR <= #FLOP_DELAY 1'b0;
end else if (regce_i) begin
DOUT <= #FLOP_DELAY DIN;
RDADDRECC <= #FLOP_DELAY RDADDRECC_IN;
SBITERR <= #FLOP_DELAY SBITERR_IN;
DBITERR <= #FLOP_DELAY DBITERR_IN;
end //Output signal assignments
end //end Priority conditions
end //end RST Type conditions
end //end one_stages_norm generate statement
endgenerate
// Special Reset Behavior for S3ADSP
generate if (NUM_STAGES == 1 && C_RSTRAM == 1 && (C_XDEVICEFAMILY =="spartan3adsp" || C_XDEVICEFAMILY =="aspartan3adsp"))
begin : one_stage_splbhv
always @(posedge CLK) begin
if (en_i && rst_i) begin
DOUT <= #FLOP_DELAY init_val;
end else if (regce_i && !rst_i) begin
DOUT <= #FLOP_DELAY DIN;
end //Output signal assignments
end //end CLK
end //end one_stage_splbhv generate statement
endgenerate
//************************************************************
// NUM_STAGES > 1
// Mem Output Reg + Mux Output Reg
// or
// Mem Output Reg + Mux Pipeline Stages (>0) + Mux Output Reg
// or
// Mux Pipeline Stages (>0) + Mux Output Reg
//*************************************************************
generate if (NUM_STAGES > 1) begin : multi_stage
//Asynchronous Reset
always @(posedge CLK) begin
if (C_RST_PRIORITY == "CE") begin //REGCE has priority
if (regce_i && rst_i) begin
DOUT <= #FLOP_DELAY init_val;
RDADDRECC <= #FLOP_DELAY 0;
SBITERR <= #FLOP_DELAY 1'b0;
DBITERR <= #FLOP_DELAY 1'b0;
end else if (regce_i) begin
DOUT <= #FLOP_DELAY
out_regs[C_DATA_WIDTH*(NUM_STAGES-2)+:C_DATA_WIDTH];
RDADDRECC <= #FLOP_DELAY rdaddrecc_regs[C_ADDRB_WIDTH*(NUM_STAGES-2)+:C_ADDRB_WIDTH];
SBITERR <= #FLOP_DELAY sbiterr_regs[NUM_STAGES-2];
DBITERR <= #FLOP_DELAY dbiterr_regs[NUM_STAGES-2];
end //Output signal assignments
end else begin //RST has priority
if (rst_i) begin
DOUT <= #FLOP_DELAY init_val;
RDADDRECC <= #FLOP_DELAY 0;
SBITERR <= #FLOP_DELAY 1'b0;
DBITERR <= #FLOP_DELAY 1'b0;
end else if (regce_i) begin
DOUT <= #FLOP_DELAY
out_regs[C_DATA_WIDTH*(NUM_STAGES-2)+:C_DATA_WIDTH];
RDADDRECC <= #FLOP_DELAY rdaddrecc_regs[C_ADDRB_WIDTH*(NUM_STAGES-2)+:C_ADDRB_WIDTH];
SBITERR <= #FLOP_DELAY sbiterr_regs[NUM_STAGES-2];
DBITERR <= #FLOP_DELAY dbiterr_regs[NUM_STAGES-2];
end //Output signal assignments
end //end Priority conditions
// Shift the data through the output stages
if (en_i) begin
out_regs <= #FLOP_DELAY (out_regs << C_DATA_WIDTH) | DIN;
rdaddrecc_regs <= #FLOP_DELAY (rdaddrecc_regs << C_ADDRB_WIDTH) | RDADDRECC_IN;
sbiterr_regs <= #FLOP_DELAY (sbiterr_regs << 1) | SBITERR_IN;
dbiterr_regs <= #FLOP_DELAY (dbiterr_regs << 1) | DBITERR_IN;
end
end //end CLK
end //end multi_stage generate statement
endgenerate
endmodule
module BLK_MEM_GEN_v8_2_softecc_output_reg_stage
#(parameter C_DATA_WIDTH = 32,
parameter C_ADDRB_WIDTH = 10,
parameter C_HAS_SOFTECC_OUTPUT_REGS_B= 0,
parameter C_USE_SOFTECC = 0,
parameter FLOP_DELAY = 100
)
(
input CLK,
input [C_DATA_WIDTH-1:0] DIN,
output reg [C_DATA_WIDTH-1:0] DOUT,
input SBITERR_IN,
input DBITERR_IN,
output reg SBITERR,
output reg DBITERR,
input [C_ADDRB_WIDTH-1:0] RDADDRECC_IN,
output reg [C_ADDRB_WIDTH-1:0] RDADDRECC
);
//******************************
// Port and Generic Definitions
//******************************
//////////////////////////////////////////////////////////////////////////
// Generic Definitions
//////////////////////////////////////////////////////////////////////////
// C_DATA_WIDTH : Memory write/read width
// C_ADDRB_WIDTH : Width of the ADDRB input port
// C_HAS_SOFTECC_OUTPUT_REGS_B : Designates the use of a register at the output
// of the RAM primitive
// C_USE_SOFTECC : Determines if the Soft ECC feature is used or
// not. Only applicable Spartan-6
// FLOP_DELAY : Constant delay for register assignments
//////////////////////////////////////////////////////////////////////////
// Port Definitions
//////////////////////////////////////////////////////////////////////////
// CLK : Clock to synchronize all read and write operations
// DIN : Data input to the Output stage.
// DOUT : Final Data output
// SBITERR_IN : SBITERR input signal to the Output stage.
// SBITERR : Final SBITERR Output signal.
// DBITERR_IN : DBITERR input signal to the Output stage.
// DBITERR : Final DBITERR Output signal.
// RDADDRECC_IN : RDADDRECC input signal to the Output stage.
// RDADDRECC : Final RDADDRECC Output signal.
//////////////////////////////////////////////////////////////////////////
reg [C_DATA_WIDTH-1:0] dout_i = 0;
reg sbiterr_i = 0;
reg dbiterr_i = 0;
reg [C_ADDRB_WIDTH-1:0] rdaddrecc_i = 0;
//***********************************************
// NO OUTPUT REGISTERS.
//***********************************************
generate if (C_HAS_SOFTECC_OUTPUT_REGS_B==0) begin : no_output_stage
always @* begin
DOUT = DIN;
RDADDRECC = RDADDRECC_IN;
SBITERR = SBITERR_IN;
DBITERR = DBITERR_IN;
end
end
endgenerate
//***********************************************
// WITH OUTPUT REGISTERS.
//***********************************************
generate if (C_HAS_SOFTECC_OUTPUT_REGS_B==1) begin : has_output_stage
always @(posedge CLK) begin
dout_i <= #FLOP_DELAY DIN;
rdaddrecc_i <= #FLOP_DELAY RDADDRECC_IN;
sbiterr_i <= #FLOP_DELAY SBITERR_IN;
dbiterr_i <= #FLOP_DELAY DBITERR_IN;
end
always @* begin
DOUT = dout_i;
RDADDRECC = rdaddrecc_i;
SBITERR = sbiterr_i;
DBITERR = dbiterr_i;
end //end always
end //end in_or_out_stage generate statement
endgenerate
endmodule
//*****************************************************************************
// Main Memory module
//
// This module is the top-level behavioral model and this implements the RAM
//*****************************************************************************
module BLK_MEM_GEN_v8_2_mem_module
#(parameter C_CORENAME = "blk_mem_gen_v8_2",
parameter C_FAMILY = "virtex7",
parameter C_XDEVICEFAMILY = "virtex7",
parameter C_MEM_TYPE = 2,
parameter C_BYTE_SIZE = 9,
parameter C_USE_BRAM_BLOCK = 0,
parameter C_ALGORITHM = 1,
parameter C_PRIM_TYPE = 3,
parameter C_LOAD_INIT_FILE = 0,
parameter C_INIT_FILE_NAME = "",
parameter C_INIT_FILE = "",
parameter C_USE_DEFAULT_DATA = 0,
parameter C_DEFAULT_DATA = "0",
parameter C_RST_TYPE = "SYNC",
parameter C_HAS_RSTA = 0,
parameter C_RST_PRIORITY_A = "CE",
parameter C_RSTRAM_A = 0,
parameter C_INITA_VAL = "0",
parameter C_HAS_ENA = 1,
parameter C_HAS_REGCEA = 0,
parameter C_USE_BYTE_WEA = 0,
parameter C_WEA_WIDTH = 1,
parameter C_WRITE_MODE_A = "WRITE_FIRST",
parameter C_WRITE_WIDTH_A = 32,
parameter C_READ_WIDTH_A = 32,
parameter C_WRITE_DEPTH_A = 64,
parameter C_READ_DEPTH_A = 64,
parameter C_ADDRA_WIDTH = 5,
parameter C_HAS_RSTB = 0,
parameter C_RST_PRIORITY_B = "CE",
parameter C_RSTRAM_B = 0,
parameter C_INITB_VAL = "",
parameter C_HAS_ENB = 1,
parameter C_HAS_REGCEB = 0,
parameter C_USE_BYTE_WEB = 0,
parameter C_WEB_WIDTH = 1,
parameter C_WRITE_MODE_B = "WRITE_FIRST",
parameter C_WRITE_WIDTH_B = 32,
parameter C_READ_WIDTH_B = 32,
parameter C_WRITE_DEPTH_B = 64,
parameter C_READ_DEPTH_B = 64,
parameter C_ADDRB_WIDTH = 5,
parameter C_HAS_MEM_OUTPUT_REGS_A = 0,
parameter C_HAS_MEM_OUTPUT_REGS_B = 0,
parameter C_HAS_MUX_OUTPUT_REGS_A = 0,
parameter C_HAS_MUX_OUTPUT_REGS_B = 0,
parameter C_HAS_SOFTECC_INPUT_REGS_A = 0,
parameter C_HAS_SOFTECC_OUTPUT_REGS_B= 0,
parameter C_MUX_PIPELINE_STAGES = 0,
parameter C_USE_SOFTECC = 0,
parameter C_USE_ECC = 0,
parameter C_HAS_INJECTERR = 0,
parameter C_SIM_COLLISION_CHECK = "NONE",
parameter C_COMMON_CLK = 1,
parameter FLOP_DELAY = 100,
parameter C_DISABLE_WARN_BHV_COLL = 0,
parameter C_EN_ECC_PIPE = 0,
parameter C_DISABLE_WARN_BHV_RANGE = 0
)
(input CLKA,
input RSTA,
input ENA,
input REGCEA,
input [C_WEA_WIDTH-1:0] WEA,
input [C_ADDRA_WIDTH-1:0] ADDRA,
input [C_WRITE_WIDTH_A-1:0] DINA,
output [C_READ_WIDTH_A-1:0] DOUTA,
input CLKB,
input RSTB,
input ENB,
input REGCEB,
input [C_WEB_WIDTH-1:0] WEB,
input [C_ADDRB_WIDTH-1:0] ADDRB,
input [C_WRITE_WIDTH_B-1:0] DINB,
output [C_READ_WIDTH_B-1:0] DOUTB,
input INJECTSBITERR,
input INJECTDBITERR,
input ECCPIPECE,
input SLEEP,
output SBITERR,
output DBITERR,
output [C_ADDRB_WIDTH-1:0] RDADDRECC
);
//******************************
// Port and Generic Definitions
//******************************
//////////////////////////////////////////////////////////////////////////
// Generic Definitions
//////////////////////////////////////////////////////////////////////////
// C_CORENAME : Instance name of the Block Memory Generator core
// C_FAMILY,C_XDEVICEFAMILY: Designates architecture targeted. The following
// options are available - "spartan3", "spartan6",
// "virtex4", "virtex5", "virtex6" and "virtex6l".
// C_MEM_TYPE : Designates memory type.
// It can be
// 0 - Single Port Memory
// 1 - Simple Dual Port Memory
// 2 - True Dual Port Memory
// 3 - Single Port Read Only Memory
// 4 - Dual Port Read Only Memory
// C_BYTE_SIZE : Size of a byte (8 or 9 bits)
// C_ALGORITHM : Designates the algorithm method used
// for constructing the memory.
// It can be Fixed_Primitives, Minimum_Area or
// Low_Power
// C_PRIM_TYPE : Designates the user selected primitive used to
// construct the memory.
//
// C_LOAD_INIT_FILE : Designates the use of an initialization file to
// initialize memory contents.
// C_INIT_FILE_NAME : Memory initialization file name.
// C_USE_DEFAULT_DATA : Designates whether to fill remaining
// initialization space with default data
// C_DEFAULT_DATA : Default value of all memory locations
// not initialized by the memory
// initialization file.
// C_RST_TYPE : Type of reset - Synchronous or Asynchronous
// C_HAS_RSTA : Determines the presence of the RSTA port
// C_RST_PRIORITY_A : Determines the priority between CE and SR for
// Port A.
// C_RSTRAM_A : Determines if special reset behavior is used for
// Port A
// C_INITA_VAL : The initialization value for Port A
// C_HAS_ENA : Determines the presence of the ENA port
// C_HAS_REGCEA : Determines the presence of the REGCEA port
// C_USE_BYTE_WEA : Determines if the Byte Write is used or not.
// C_WEA_WIDTH : The width of the WEA port
// C_WRITE_MODE_A : Configurable write mode for Port A. It can be
// WRITE_FIRST, READ_FIRST or NO_CHANGE.
// C_WRITE_WIDTH_A : Memory write width for Port A.
// C_READ_WIDTH_A : Memory read width for Port A.
// C_WRITE_DEPTH_A : Memory write depth for Port A.
// C_READ_DEPTH_A : Memory read depth for Port A.
// C_ADDRA_WIDTH : Width of the ADDRA input port
// C_HAS_RSTB : Determines the presence of the RSTB port
// C_RST_PRIORITY_B : Determines the priority between CE and SR for
// Port B.
// C_RSTRAM_B : Determines if special reset behavior is used for
// Port B
// C_INITB_VAL : The initialization value for Port B
// C_HAS_ENB : Determines the presence of the ENB port
// C_HAS_REGCEB : Determines the presence of the REGCEB port
// C_USE_BYTE_WEB : Determines if the Byte Write is used or not.
// C_WEB_WIDTH : The width of the WEB port
// C_WRITE_MODE_B : Configurable write mode for Port B. It can be
// WRITE_FIRST, READ_FIRST or NO_CHANGE.
// C_WRITE_WIDTH_B : Memory write width for Port B.
// C_READ_WIDTH_B : Memory read width for Port B.
// C_WRITE_DEPTH_B : Memory write depth for Port B.
// C_READ_DEPTH_B : Memory read depth for Port B.
// C_ADDRB_WIDTH : Width of the ADDRB input port
// C_HAS_MEM_OUTPUT_REGS_A : Designates the use of a register at the output
// of the RAM primitive for Port A.
// C_HAS_MEM_OUTPUT_REGS_B : Designates the use of a register at the output
// of the RAM primitive for Port B.
// C_HAS_MUX_OUTPUT_REGS_A : Designates the use of a register at the output
// of the MUX for Port A.
// C_HAS_MUX_OUTPUT_REGS_B : Designates the use of a register at the output
// of the MUX for Port B.
// C_MUX_PIPELINE_STAGES : Designates the number of pipeline stages in
// between the muxes.
// C_USE_SOFTECC : Determines if the Soft ECC feature is used or
// not. Only applicable Spartan-6
// C_USE_ECC : Determines if the ECC feature is used or
// not. Only applicable for V5 and V6
// C_HAS_INJECTERR : Determines if the error injection pins
// are present or not. If the ECC feature
// is not used, this value is defaulted to
// 0, else the following are the allowed
// values:
// 0 : No INJECTSBITERR or INJECTDBITERR pins
// 1 : Only INJECTSBITERR pin exists
// 2 : Only INJECTDBITERR pin exists
// 3 : Both INJECTSBITERR and INJECTDBITERR pins exist
// C_SIM_COLLISION_CHECK : Controls the disabling of Unisim model collision
// warnings. It can be "ALL", "NONE",
// "Warnings_Only" or "Generate_X_Only".
// C_COMMON_CLK : Determins if the core has a single CLK input.
// C_DISABLE_WARN_BHV_COLL : Controls the Behavioral Model Collision warnings
// C_DISABLE_WARN_BHV_RANGE: Controls the Behavioral Model Out of Range
// warnings
//////////////////////////////////////////////////////////////////////////
// Port Definitions
//////////////////////////////////////////////////////////////////////////
// CLKA : Clock to synchronize all read and write operations of Port A.
// RSTA : Reset input to reset memory outputs to a user-defined
// reset state for Port A.
// ENA : Enable all read and write operations of Port A.
// REGCEA : Register Clock Enable to control each pipeline output
// register stages for Port A.
// WEA : Write Enable to enable all write operations of Port A.
// ADDRA : Address of Port A.
// DINA : Data input of Port A.
// DOUTA : Data output of Port A.
// CLKB : Clock to synchronize all read and write operations of Port B.
// RSTB : Reset input to reset memory outputs to a user-defined
// reset state for Port B.
// ENB : Enable all read and write operations of Port B.
// REGCEB : Register Clock Enable to control each pipeline output
// register stages for Port B.
// WEB : Write Enable to enable all write operations of Port B.
// ADDRB : Address of Port B.
// DINB : Data input of Port B.
// DOUTB : Data output of Port B.
// INJECTSBITERR : Single Bit ECC Error Injection Pin.
// INJECTDBITERR : Double Bit ECC Error Injection Pin.
// SBITERR : Output signal indicating that a Single Bit ECC Error has been
// detected and corrected.
// DBITERR : Output signal indicating that a Double Bit ECC Error has been
// detected.
// RDADDRECC : Read Address Output signal indicating address at which an
// ECC error has occurred.
//////////////////////////////////////////////////////////////////////////
// Note: C_CORENAME parameter is hard-coded to "blk_mem_gen_v8_2" and it is
// only used by this module to print warning messages. It is neither passed
// down from blk_mem_gen_v8_2_xst.v nor present in the instantiation template
// coregen generates
//***************************************************************************
// constants for the core behavior
//***************************************************************************
// file handles for logging
//--------------------------------------------------
localparam ADDRFILE = 32'h8000_0001; //stdout for addr out of range
localparam COLLFILE = 32'h8000_0001; //stdout for coll detection
localparam ERRFILE = 32'h8000_0001; //stdout for file I/O errors
// other constants
//--------------------------------------------------
localparam COLL_DELAY = 100; // 100 ps
// locally derived parameters to determine memory shape
//-----------------------------------------------------
localparam CHKBIT_WIDTH = (C_WRITE_WIDTH_A>57 ? 8 : (C_WRITE_WIDTH_A>26 ? 7 : (C_WRITE_WIDTH_A>11 ? 6 : (C_WRITE_WIDTH_A>4 ? 5 : (C_WRITE_WIDTH_A<5 ? 4 :0)))));
localparam MIN_WIDTH_A = (C_WRITE_WIDTH_A < C_READ_WIDTH_A) ?
C_WRITE_WIDTH_A : C_READ_WIDTH_A;
localparam MIN_WIDTH_B = (C_WRITE_WIDTH_B < C_READ_WIDTH_B) ?
C_WRITE_WIDTH_B : C_READ_WIDTH_B;
localparam MIN_WIDTH = (MIN_WIDTH_A < MIN_WIDTH_B) ?
MIN_WIDTH_A : MIN_WIDTH_B;
localparam MAX_DEPTH_A = (C_WRITE_DEPTH_A > C_READ_DEPTH_A) ?
C_WRITE_DEPTH_A : C_READ_DEPTH_A;
localparam MAX_DEPTH_B = (C_WRITE_DEPTH_B > C_READ_DEPTH_B) ?
C_WRITE_DEPTH_B : C_READ_DEPTH_B;
localparam MAX_DEPTH = (MAX_DEPTH_A > MAX_DEPTH_B) ?
MAX_DEPTH_A : MAX_DEPTH_B;
// locally derived parameters to assist memory access
//----------------------------------------------------
// Calculate the width ratios of each port with respect to the narrowest
// port
localparam WRITE_WIDTH_RATIO_A = C_WRITE_WIDTH_A/MIN_WIDTH;
localparam READ_WIDTH_RATIO_A = C_READ_WIDTH_A/MIN_WIDTH;
localparam WRITE_WIDTH_RATIO_B = C_WRITE_WIDTH_B/MIN_WIDTH;
localparam READ_WIDTH_RATIO_B = C_READ_WIDTH_B/MIN_WIDTH;
// To modify the LSBs of the 'wider' data to the actual
// address value
//----------------------------------------------------
localparam WRITE_ADDR_A_DIV = C_WRITE_WIDTH_A/MIN_WIDTH_A;
localparam READ_ADDR_A_DIV = C_READ_WIDTH_A/MIN_WIDTH_A;
localparam WRITE_ADDR_B_DIV = C_WRITE_WIDTH_B/MIN_WIDTH_B;
localparam READ_ADDR_B_DIV = C_READ_WIDTH_B/MIN_WIDTH_B;
// If byte writes aren't being used, make sure BYTE_SIZE is not
// wider than the memory elements to avoid compilation warnings
localparam BYTE_SIZE = (C_BYTE_SIZE < MIN_WIDTH) ? C_BYTE_SIZE : MIN_WIDTH;
// The memory
reg [MIN_WIDTH-1:0] memory [0:MAX_DEPTH-1];
reg [MIN_WIDTH-1:0] temp_mem_array [0:MAX_DEPTH-1];
reg [C_WRITE_WIDTH_A+CHKBIT_WIDTH-1:0] doublebit_error = 3;
// ECC error arrays
reg sbiterr_arr [0:MAX_DEPTH-1];
reg dbiterr_arr [0:MAX_DEPTH-1];
reg softecc_sbiterr_arr [0:MAX_DEPTH-1];
reg softecc_dbiterr_arr [0:MAX_DEPTH-1];
// Memory output 'latches'
reg [C_READ_WIDTH_A-1:0] memory_out_a;
reg [C_READ_WIDTH_B-1:0] memory_out_b;
// ECC error inputs and outputs from output_stage module:
reg sbiterr_in;
wire sbiterr_sdp;
reg dbiterr_in;
wire dbiterr_sdp;
wire [C_READ_WIDTH_B-1:0] dout_i;
wire dbiterr_i;
wire sbiterr_i;
wire [C_ADDRB_WIDTH-1:0] rdaddrecc_i;
reg [C_ADDRB_WIDTH-1:0] rdaddrecc_in;
wire [C_ADDRB_WIDTH-1:0] rdaddrecc_sdp;
// Reset values
reg [C_READ_WIDTH_A-1:0] inita_val;
reg [C_READ_WIDTH_B-1:0] initb_val;
// Collision detect
reg is_collision;
reg is_collision_a, is_collision_delay_a;
reg is_collision_b, is_collision_delay_b;
// Temporary variables for initialization
//---------------------------------------
integer status;
integer initfile;
integer meminitfile;
// data input buffer
reg [C_WRITE_WIDTH_A-1:0] mif_data;
reg [C_WRITE_WIDTH_A-1:0] mem_data;
// string values in hex
reg [C_READ_WIDTH_A*8-1:0] inita_str = C_INITA_VAL;
reg [C_READ_WIDTH_B*8-1:0] initb_str = C_INITB_VAL;
reg [C_WRITE_WIDTH_A*8-1:0] default_data_str = C_DEFAULT_DATA;
// initialization filename
reg [1023*8-1:0] init_file_str = C_INIT_FILE_NAME;
reg [1023*8-1:0] mem_init_file_str = C_INIT_FILE;
//Constants used to calculate the effective address widths for each of the
//four ports.
integer cnt = 1;
integer write_addr_a_width, read_addr_a_width;
integer write_addr_b_width, read_addr_b_width;
localparam C_FAMILY_LOCALPARAM = (C_FAMILY=="virtexu"?"virtex7":(C_FAMILY=="kintexu" ? "virtex7":(C_FAMILY=="virtex7" ? "virtex7" : (C_FAMILY=="virtex7l" ? "virtex7" : (C_FAMILY=="qvirtex7" ? "virtex7" : (C_FAMILY=="qvirtex7l" ? "virtex7" : (C_FAMILY=="kintex7" ? "virtex7" : (C_FAMILY=="kintex7l" ? "virtex7" : (C_FAMILY=="qkintex7" ? "virtex7" : (C_FAMILY=="qkintex7l" ? "virtex7" : (C_FAMILY=="artix7" ? "virtex7" : (C_FAMILY=="artix7l" ? "virtex7" : (C_FAMILY=="qartix7" ? "virtex7" : (C_FAMILY=="qartix7l" ? "virtex7" : (C_FAMILY=="aartix7" ? "virtex7" : (C_FAMILY=="zynq" ? "virtex7" : (C_FAMILY=="azynq" ? "virtex7" : (C_FAMILY=="qzynq" ? "virtex7" : C_FAMILY))))))))))))))))));
// Internal configuration parameters
//---------------------------------------------
localparam SINGLE_PORT = (C_MEM_TYPE==0 || C_MEM_TYPE==3);
localparam IS_ROM = (C_MEM_TYPE==3 || C_MEM_TYPE==4);
localparam HAS_A_WRITE = (!IS_ROM);
localparam HAS_B_WRITE = (C_MEM_TYPE==2);
localparam HAS_A_READ = (C_MEM_TYPE!=1);
localparam HAS_B_READ = (!SINGLE_PORT);
localparam HAS_B_PORT = (HAS_B_READ || HAS_B_WRITE);
// Calculate the mux pipeline register stages for Port A and Port B
//------------------------------------------------------------------
localparam MUX_PIPELINE_STAGES_A = (C_HAS_MUX_OUTPUT_REGS_A) ?
C_MUX_PIPELINE_STAGES : 0;
localparam MUX_PIPELINE_STAGES_B = (C_HAS_MUX_OUTPUT_REGS_B) ?
C_MUX_PIPELINE_STAGES : 0;
// Calculate total number of register stages in the core
// -----------------------------------------------------
localparam NUM_OUTPUT_STAGES_A = (C_HAS_MEM_OUTPUT_REGS_A+MUX_PIPELINE_STAGES_A+C_HAS_MUX_OUTPUT_REGS_A);
localparam NUM_OUTPUT_STAGES_B = (C_HAS_MEM_OUTPUT_REGS_B+MUX_PIPELINE_STAGES_B+C_HAS_MUX_OUTPUT_REGS_B);
wire ena_i;
wire enb_i;
wire reseta_i;
wire resetb_i;
wire [C_WEA_WIDTH-1:0] wea_i;
wire [C_WEB_WIDTH-1:0] web_i;
wire rea_i;
wire reb_i;
wire rsta_outp_stage;
wire rstb_outp_stage;
// ECC SBITERR/DBITERR Outputs
// The ECC Behavior is modeled by the behavioral models only for Virtex-6.
// For Virtex-5, these outputs will be tied to 0.
assign SBITERR = ((C_MEM_TYPE == 1 && C_USE_ECC == 1) || C_USE_SOFTECC == 1)?sbiterr_sdp:0;
assign DBITERR = ((C_MEM_TYPE == 1 && C_USE_ECC == 1) || C_USE_SOFTECC == 1)?dbiterr_sdp:0;
assign RDADDRECC = (((C_FAMILY_LOCALPARAM == "virtex7") && C_MEM_TYPE == 1 && C_USE_ECC == 1) || C_USE_SOFTECC == 1)?rdaddrecc_sdp:0;
// This effectively wires off optional inputs
assign ena_i = (C_HAS_ENA==0) || ENA;
assign enb_i = ((C_HAS_ENB==0) || ENB) && HAS_B_PORT;
assign wea_i = (HAS_A_WRITE && ena_i) ? WEA : 'b0;
assign web_i = (HAS_B_WRITE && enb_i) ? WEB : 'b0;
assign rea_i = (HAS_A_READ) ? ena_i : 'b0;
assign reb_i = (HAS_B_READ) ? enb_i : 'b0;
// These signals reset the memory latches
assign reseta_i =
((C_HAS_RSTA==1 && RSTA && NUM_OUTPUT_STAGES_A==0) ||
(C_HAS_RSTA==1 && RSTA && C_RSTRAM_A==1));
assign resetb_i =
((C_HAS_RSTB==1 && RSTB && NUM_OUTPUT_STAGES_B==0) ||
(C_HAS_RSTB==1 && RSTB && C_RSTRAM_B==1));
// Tasks to access the memory
//---------------------------
//**************
// write_a
//**************
task write_a
(input reg [C_ADDRA_WIDTH-1:0] addr,
input reg [C_WEA_WIDTH-1:0] byte_en,
input reg [C_WRITE_WIDTH_A-1:0] data,
input inj_sbiterr,
input inj_dbiterr);
reg [C_WRITE_WIDTH_A-1:0] current_contents;
reg [C_ADDRA_WIDTH-1:0] address;
integer i;
begin
// Shift the address by the ratio
address = (addr/WRITE_ADDR_A_DIV);
if (address >= C_WRITE_DEPTH_A) begin
if (!C_DISABLE_WARN_BHV_RANGE) begin
$fdisplay(ADDRFILE,
"%0s WARNING: Address %0h is outside range for A Write",
C_CORENAME, addr);
end
// valid address
end else begin
// Combine w/ byte writes
if (C_USE_BYTE_WEA) begin
// Get the current memory contents
if (WRITE_WIDTH_RATIO_A == 1) begin
// Workaround for IUS 5.5 part-select issue
current_contents = memory[address];
end else begin
for (i = 0; i < WRITE_WIDTH_RATIO_A; i = i + 1) begin
current_contents[MIN_WIDTH*i+:MIN_WIDTH]
= memory[address*WRITE_WIDTH_RATIO_A + i];
end
end
// Apply incoming bytes
if (C_WEA_WIDTH == 1) begin
// Workaround for IUS 5.5 part-select issue
if (byte_en[0]) begin
current_contents = data;
end
end else begin
for (i = 0; i < C_WEA_WIDTH; i = i + 1) begin
if (byte_en[i]) begin
current_contents[BYTE_SIZE*i+:BYTE_SIZE]
= data[BYTE_SIZE*i+:BYTE_SIZE];
end
end
end
// No byte-writes, overwrite the whole word
end else begin
current_contents = data;
end
// Insert double bit errors:
if (C_USE_ECC == 1) begin
if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin
current_contents[0] = !(current_contents[0]);
current_contents[1] = !(current_contents[1]);
end
end
// Insert softecc double bit errors:
if (C_USE_SOFTECC == 1) begin
if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin
doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-1:2] = doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-3:0];
doublebit_error[0] = doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-1];
doublebit_error[1] = doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-2];
current_contents = current_contents ^ doublebit_error[C_WRITE_WIDTH_A-1:0];
end
end
// Write data to memory
if (WRITE_WIDTH_RATIO_A == 1) begin
// Workaround for IUS 5.5 part-select issue
memory[address*WRITE_WIDTH_RATIO_A] = current_contents;
end else begin
for (i = 0; i < WRITE_WIDTH_RATIO_A; i = i + 1) begin
memory[address*WRITE_WIDTH_RATIO_A + i]
= current_contents[MIN_WIDTH*i+:MIN_WIDTH];
end
end
// Store the address at which error is injected:
if ((C_FAMILY_LOCALPARAM == "virtex7") && C_USE_ECC == 1) begin
if ((C_HAS_INJECTERR == 1 && inj_sbiterr == 1'b1) ||
(C_HAS_INJECTERR == 3 && inj_sbiterr == 1'b1 && inj_dbiterr != 1'b1))
begin
sbiterr_arr[addr] = 1;
end else begin
sbiterr_arr[addr] = 0;
end
if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin
dbiterr_arr[addr] = 1;
end else begin
dbiterr_arr[addr] = 0;
end
end
// Store the address at which softecc error is injected:
if (C_USE_SOFTECC == 1) begin
if ((C_HAS_INJECTERR == 1 && inj_sbiterr == 1'b1) ||
(C_HAS_INJECTERR == 3 && inj_sbiterr == 1'b1 && inj_dbiterr != 1'b1))
begin
softecc_sbiterr_arr[addr] = 1;
end else begin
softecc_sbiterr_arr[addr] = 0;
end
if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin
softecc_dbiterr_arr[addr] = 1;
end else begin
softecc_dbiterr_arr[addr] = 0;
end
end
end
end
endtask
//**************
// write_b
//**************
task write_b
(input reg [C_ADDRB_WIDTH-1:0] addr,
input reg [C_WEB_WIDTH-1:0] byte_en,
input reg [C_WRITE_WIDTH_B-1:0] data);
reg [C_WRITE_WIDTH_B-1:0] current_contents;
reg [C_ADDRB_WIDTH-1:0] address;
integer i;
begin
// Shift the address by the ratio
address = (addr/WRITE_ADDR_B_DIV);
if (address >= C_WRITE_DEPTH_B) begin
if (!C_DISABLE_WARN_BHV_RANGE) begin
$fdisplay(ADDRFILE,
"%0s WARNING: Address %0h is outside range for B Write",
C_CORENAME, addr);
end
// valid address
end else begin
// Combine w/ byte writes
if (C_USE_BYTE_WEB) begin
// Get the current memory contents
if (WRITE_WIDTH_RATIO_B == 1) begin
// Workaround for IUS 5.5 part-select issue
current_contents = memory[address];
end else begin
for (i = 0; i < WRITE_WIDTH_RATIO_B; i = i + 1) begin
current_contents[MIN_WIDTH*i+:MIN_WIDTH]
= memory[address*WRITE_WIDTH_RATIO_B + i];
end
end
// Apply incoming bytes
if (C_WEB_WIDTH == 1) begin
// Workaround for IUS 5.5 part-select issue
if (byte_en[0]) begin
current_contents = data;
end
end else begin
for (i = 0; i < C_WEB_WIDTH; i = i + 1) begin
if (byte_en[i]) begin
current_contents[BYTE_SIZE*i+:BYTE_SIZE]
= data[BYTE_SIZE*i+:BYTE_SIZE];
end
end
end
// No byte-writes, overwrite the whole word
end else begin
current_contents = data;
end
// Write data to memory
if (WRITE_WIDTH_RATIO_B == 1) begin
// Workaround for IUS 5.5 part-select issue
memory[address*WRITE_WIDTH_RATIO_B] = current_contents;
end else begin
for (i = 0; i < WRITE_WIDTH_RATIO_B; i = i + 1) begin
memory[address*WRITE_WIDTH_RATIO_B + i]
= current_contents[MIN_WIDTH*i+:MIN_WIDTH];
end
end
end
end
endtask
//**************
// read_a
//**************
task read_a
(input reg [C_ADDRA_WIDTH-1:0] addr,
input reg reset);
reg [C_ADDRA_WIDTH-1:0] address;
integer i;
begin
if (reset) begin
memory_out_a <= #FLOP_DELAY inita_val;
end else begin
// Shift the address by the ratio
address = (addr/READ_ADDR_A_DIV);
if (address >= C_READ_DEPTH_A) begin
if (!C_DISABLE_WARN_BHV_RANGE) begin
$fdisplay(ADDRFILE,
"%0s WARNING: Address %0h is outside range for A Read",
C_CORENAME, addr);
end
memory_out_a <= #FLOP_DELAY 'bX;
// valid address
end else begin
if (READ_WIDTH_RATIO_A==1) begin
memory_out_a <= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_A];
end else begin
// Increment through the 'partial' words in the memory
for (i = 0; i < READ_WIDTH_RATIO_A; i = i + 1) begin
memory_out_a[MIN_WIDTH*i+:MIN_WIDTH]
<= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_A + i];
end
end //end READ_WIDTH_RATIO_A==1 loop
end //end valid address loop
end //end reset-data assignment loops
end
endtask
//**************
// read_b
//**************
task read_b
(input reg [C_ADDRB_WIDTH-1:0] addr,
input reg reset);
reg [C_ADDRB_WIDTH-1:0] address;
integer i;
begin
if (reset) begin
memory_out_b <= #FLOP_DELAY initb_val;
sbiterr_in <= #FLOP_DELAY 1'b0;
dbiterr_in <= #FLOP_DELAY 1'b0;
rdaddrecc_in <= #FLOP_DELAY 0;
end else begin
// Shift the address
address = (addr/READ_ADDR_B_DIV);
if (address >= C_READ_DEPTH_B) begin
if (!C_DISABLE_WARN_BHV_RANGE) begin
$fdisplay(ADDRFILE,
"%0s WARNING: Address %0h is outside range for B Read",
C_CORENAME, addr);
end
memory_out_b <= #FLOP_DELAY 'bX;
sbiterr_in <= #FLOP_DELAY 1'bX;
dbiterr_in <= #FLOP_DELAY 1'bX;
rdaddrecc_in <= #FLOP_DELAY 'bX;
// valid address
end else begin
if (READ_WIDTH_RATIO_B==1) begin
memory_out_b <= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_B];
end else begin
// Increment through the 'partial' words in the memory
for (i = 0; i < READ_WIDTH_RATIO_B; i = i + 1) begin
memory_out_b[MIN_WIDTH*i+:MIN_WIDTH]
<= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_B + i];
end
end
if ((C_FAMILY_LOCALPARAM == "virtex7") && C_USE_ECC == 1) begin
rdaddrecc_in <= #FLOP_DELAY addr;
if (sbiterr_arr[addr] == 1) begin
sbiterr_in <= #FLOP_DELAY 1'b1;
end else begin
sbiterr_in <= #FLOP_DELAY 1'b0;
end
if (dbiterr_arr[addr] == 1) begin
dbiterr_in <= #FLOP_DELAY 1'b1;
end else begin
dbiterr_in <= #FLOP_DELAY 1'b0;
end
end else if (C_USE_SOFTECC == 1) begin
rdaddrecc_in <= #FLOP_DELAY addr;
if (softecc_sbiterr_arr[addr] == 1) begin
sbiterr_in <= #FLOP_DELAY 1'b1;
end else begin
sbiterr_in <= #FLOP_DELAY 1'b0;
end
if (softecc_dbiterr_arr[addr] == 1) begin
dbiterr_in <= #FLOP_DELAY 1'b1;
end else begin
dbiterr_in <= #FLOP_DELAY 1'b0;
end
end else begin
rdaddrecc_in <= #FLOP_DELAY 0;
dbiterr_in <= #FLOP_DELAY 1'b0;
sbiterr_in <= #FLOP_DELAY 1'b0;
end //end SOFTECC Loop
end //end Valid address loop
end //end reset-data assignment loops
end
endtask
//**************
// reset_a
//**************
task reset_a (input reg reset);
begin
if (reset) memory_out_a <= #FLOP_DELAY inita_val;
end
endtask
//**************
// reset_b
//**************
task reset_b (input reg reset);
begin
if (reset) memory_out_b <= #FLOP_DELAY initb_val;
end
endtask
//**************
// init_memory
//**************
task init_memory;
integer i, j, addr_step;
integer status;
reg [C_WRITE_WIDTH_A-1:0] default_data;
begin
default_data = 0;
//Display output message indicating that the behavioral model is being
//initialized
if (C_USE_DEFAULT_DATA || C_LOAD_INIT_FILE) $display(" Block Memory Generator module loading initial data...");
// Convert the default to hex
if (C_USE_DEFAULT_DATA) begin
if (default_data_str == "") begin
$fdisplay(ERRFILE, "%0s ERROR: C_DEFAULT_DATA is empty!", C_CORENAME);
$finish;
end else begin
status = $sscanf(default_data_str, "%h", default_data);
if (status == 0) begin
$fdisplay(ERRFILE, {"%0s ERROR: Unsuccessful hexadecimal read",
"from C_DEFAULT_DATA: %0s"},
C_CORENAME, C_DEFAULT_DATA);
$finish;
end
end
end
// Step by WRITE_ADDR_A_DIV through the memory via the
// Port A write interface to hit every location once
addr_step = WRITE_ADDR_A_DIV;
// 'write' to every location with default (or 0)
for (i = 0; i < C_WRITE_DEPTH_A*addr_step; i = i + addr_step) begin
write_a(i, {C_WEA_WIDTH{1'b1}}, default_data, 1'b0, 1'b0);
end
// Get specialized data from the MIF file
if (C_LOAD_INIT_FILE) begin
if (init_file_str == "") begin
$fdisplay(ERRFILE, "%0s ERROR: C_INIT_FILE_NAME is empty!",
C_CORENAME);
$finish;
end else begin
initfile = $fopen(init_file_str, "r");
if (initfile == 0) begin
$fdisplay(ERRFILE, {"%0s, ERROR: Problem opening",
"C_INIT_FILE_NAME: %0s!"},
C_CORENAME, init_file_str);
$finish;
end else begin
// loop through the mif file, loading in the data
for (i = 0; i < C_WRITE_DEPTH_A*addr_step; i = i + addr_step) begin
status = $fscanf(initfile, "%b", mif_data);
if (status > 0) begin
write_a(i, {C_WEA_WIDTH{1'b1}}, mif_data, 1'b0, 1'b0);
end
end
$fclose(initfile);
end //initfile
end //init_file_str
end //C_LOAD_INIT_FILE
if (C_USE_BRAM_BLOCK) begin
// Get specialized data from the MIF file
if (C_INIT_FILE != "NONE") begin
if (mem_init_file_str == "") begin
$fdisplay(ERRFILE, "%0s ERROR: C_INIT_FILE is empty!",
C_CORENAME);
$finish;
end else begin
meminitfile = $fopen(mem_init_file_str, "r");
if (meminitfile == 0) begin
$fdisplay(ERRFILE, {"%0s, ERROR: Problem opening",
"C_INIT_FILE: %0s!"},
C_CORENAME, mem_init_file_str);
$finish;
end else begin
// loop through the mif file, loading in the data
$readmemh(mem_init_file_str, memory );
for (j = 0; j < MAX_DEPTH-1 ; j = j + 1) begin
end
$fclose(meminitfile);
end //meminitfile
end //mem_init_file_str
end //C_INIT_FILE
end //C_USE_BRAM_BLOCK
//Display output message indicating that the behavioral model is done
//initializing
if (C_USE_DEFAULT_DATA || C_LOAD_INIT_FILE)
$display(" Block Memory Generator data initialization complete.");
end
endtask
//**************
// log2roundup
//**************
function integer log2roundup (input integer data_value);
integer width;
integer cnt;
begin
width = 0;
if (data_value > 1) begin
for(cnt=1 ; cnt < data_value ; cnt = cnt * 2) begin
width = width + 1;
end //loop
end //if
log2roundup = width;
end //log2roundup
endfunction
//*******************
// collision_check
//*******************
function integer collision_check (input reg [C_ADDRA_WIDTH-1:0] addr_a,
input integer iswrite_a,
input reg [C_ADDRB_WIDTH-1:0] addr_b,
input integer iswrite_b);
reg c_aw_bw, c_aw_br, c_ar_bw;
integer scaled_addra_to_waddrb_width;
integer scaled_addrb_to_waddrb_width;
integer scaled_addra_to_waddra_width;
integer scaled_addrb_to_waddra_width;
integer scaled_addra_to_raddrb_width;
integer scaled_addrb_to_raddrb_width;
integer scaled_addra_to_raddra_width;
integer scaled_addrb_to_raddra_width;
begin
c_aw_bw = 0;
c_aw_br = 0;
c_ar_bw = 0;
//If write_addr_b_width is smaller, scale both addresses to that width for
//comparing write_addr_a and write_addr_b; addr_a starts as C_ADDRA_WIDTH,
//scale it down to write_addr_b_width. addr_b starts as C_ADDRB_WIDTH,
//scale it down to write_addr_b_width. Once both are scaled to
//write_addr_b_width, compare.
scaled_addra_to_waddrb_width = ((addr_a)/
2**(C_ADDRA_WIDTH-write_addr_b_width));
scaled_addrb_to_waddrb_width = ((addr_b)/
2**(C_ADDRB_WIDTH-write_addr_b_width));
//If write_addr_a_width is smaller, scale both addresses to that width for
//comparing write_addr_a and write_addr_b; addr_a starts as C_ADDRA_WIDTH,
//scale it down to write_addr_a_width. addr_b starts as C_ADDRB_WIDTH,
//scale it down to write_addr_a_width. Once both are scaled to
//write_addr_a_width, compare.
scaled_addra_to_waddra_width = ((addr_a)/
2**(C_ADDRA_WIDTH-write_addr_a_width));
scaled_addrb_to_waddra_width = ((addr_b)/
2**(C_ADDRB_WIDTH-write_addr_a_width));
//If read_addr_b_width is smaller, scale both addresses to that width for
//comparing write_addr_a and read_addr_b; addr_a starts as C_ADDRA_WIDTH,
//scale it down to read_addr_b_width. addr_b starts as C_ADDRB_WIDTH,
//scale it down to read_addr_b_width. Once both are scaled to
//read_addr_b_width, compare.
scaled_addra_to_raddrb_width = ((addr_a)/
2**(C_ADDRA_WIDTH-read_addr_b_width));
scaled_addrb_to_raddrb_width = ((addr_b)/
2**(C_ADDRB_WIDTH-read_addr_b_width));
//If read_addr_a_width is smaller, scale both addresses to that width for
//comparing read_addr_a and write_addr_b; addr_a starts as C_ADDRA_WIDTH,
//scale it down to read_addr_a_width. addr_b starts as C_ADDRB_WIDTH,
//scale it down to read_addr_a_width. Once both are scaled to
//read_addr_a_width, compare.
scaled_addra_to_raddra_width = ((addr_a)/
2**(C_ADDRA_WIDTH-read_addr_a_width));
scaled_addrb_to_raddra_width = ((addr_b)/
2**(C_ADDRB_WIDTH-read_addr_a_width));
//Look for a write-write collision. In order for a write-write
//collision to exist, both ports must have a write transaction.
if (iswrite_a && iswrite_b) begin
if (write_addr_a_width > write_addr_b_width) begin
if (scaled_addra_to_waddrb_width == scaled_addrb_to_waddrb_width) begin
c_aw_bw = 1;
end else begin
c_aw_bw = 0;
end
end else begin
if (scaled_addrb_to_waddra_width == scaled_addra_to_waddra_width) begin
c_aw_bw = 1;
end else begin
c_aw_bw = 0;
end
end //width
end //iswrite_a and iswrite_b
//If the B port is reading (which means it is enabled - so could be
//a TX_WRITE or TX_READ), then check for a write-read collision).
//This could happen whether or not a write-write collision exists due
//to asymmetric write/read ports.
if (iswrite_a) begin
if (write_addr_a_width > read_addr_b_width) begin
if (scaled_addra_to_raddrb_width == scaled_addrb_to_raddrb_width) begin
c_aw_br = 1;
end else begin
c_aw_br = 0;
end
end else begin
if (scaled_addrb_to_waddra_width == scaled_addra_to_waddra_width) begin
c_aw_br = 1;
end else begin
c_aw_br = 0;
end
end //width
end //iswrite_a
//If the A port is reading (which means it is enabled - so could be
// a TX_WRITE or TX_READ), then check for a write-read collision).
//This could happen whether or not a write-write collision exists due
// to asymmetric write/read ports.
if (iswrite_b) begin
if (read_addr_a_width > write_addr_b_width) begin
if (scaled_addra_to_waddrb_width == scaled_addrb_to_waddrb_width) begin
c_ar_bw = 1;
end else begin
c_ar_bw = 0;
end
end else begin
if (scaled_addrb_to_raddra_width == scaled_addra_to_raddra_width) begin
c_ar_bw = 1;
end else begin
c_ar_bw = 0;
end
end //width
end //iswrite_b
collision_check = c_aw_bw | c_aw_br | c_ar_bw;
end
endfunction
//*******************************
// power on values
//*******************************
initial begin
// Load up the memory
init_memory;
// Load up the output registers and latches
if ($sscanf(inita_str, "%h", inita_val)) begin
memory_out_a = inita_val;
end else begin
memory_out_a = 0;
end
if ($sscanf(initb_str, "%h", initb_val)) begin
memory_out_b = initb_val;
end else begin
memory_out_b = 0;
end
sbiterr_in = 1'b0;
dbiterr_in = 1'b0;
rdaddrecc_in = 0;
// Determine the effective address widths for each of the 4 ports
write_addr_a_width = C_ADDRA_WIDTH - log2roundup(WRITE_ADDR_A_DIV);
read_addr_a_width = C_ADDRA_WIDTH - log2roundup(READ_ADDR_A_DIV);
write_addr_b_width = C_ADDRB_WIDTH - log2roundup(WRITE_ADDR_B_DIV);
read_addr_b_width = C_ADDRB_WIDTH - log2roundup(READ_ADDR_B_DIV);
$display("Block Memory Generator module %m is using a behavioral model for simulation which will not precisely model memory collision behavior.");
end
//***************************************************************************
// These are the main blocks which schedule read and write operations
// Note that the reset priority feature at the latch stage is only supported
// for Spartan-6. For other families, the default priority at the latch stage
// is "CE"
//***************************************************************************
// Synchronous clocks: schedule port operations with respect to
// both write operating modes
generate
if(C_COMMON_CLK && (C_WRITE_MODE_A == "WRITE_FIRST") && (C_WRITE_MODE_B ==
"WRITE_FIRST")) begin : com_clk_sched_wf_wf
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
end
end
else
if(C_COMMON_CLK && (C_WRITE_MODE_A == "READ_FIRST") && (C_WRITE_MODE_B ==
"WRITE_FIRST")) begin : com_clk_sched_rf_wf
always @(posedge CLKA) begin
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
end
end
else
if(C_COMMON_CLK && (C_WRITE_MODE_A == "WRITE_FIRST") && (C_WRITE_MODE_B ==
"READ_FIRST")) begin : com_clk_sched_wf_rf
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else
if(C_COMMON_CLK && (C_WRITE_MODE_A == "READ_FIRST") && (C_WRITE_MODE_B ==
"READ_FIRST")) begin : com_clk_sched_rf_rf
always @(posedge CLKA) begin
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="WRITE_FIRST") && (C_WRITE_MODE_B ==
"NO_CHANGE")) begin : com_clk_sched_wf_nc
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="READ_FIRST") && (C_WRITE_MODE_B ==
"NO_CHANGE")) begin : com_clk_sched_rf_nc
always @(posedge CLKA) begin
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="NO_CHANGE") && (C_WRITE_MODE_B ==
"WRITE_FIRST")) begin : com_clk_sched_nc_wf
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read A
if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="NO_CHANGE") && (C_WRITE_MODE_B ==
"READ_FIRST")) begin : com_clk_sched_nc_rf
always @(posedge CLKA) begin
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Read A
if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="NO_CHANGE") && (C_WRITE_MODE_B ==
"NO_CHANGE")) begin : com_clk_sched_nc_nc
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read A
if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i);
//Read B
if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i);
end
end
else if(C_COMMON_CLK) begin: com_clk_sched_default
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
end
end
endgenerate
// Asynchronous clocks: port operation is independent
generate
if((!C_COMMON_CLK) && (C_WRITE_MODE_A == "WRITE_FIRST")) begin : async_clk_sched_clka_wf
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
end
end
else if((!C_COMMON_CLK) && (C_WRITE_MODE_A == "READ_FIRST")) begin : async_clk_sched_clka_rf
always @(posedge CLKA) begin
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
end
end
else if((!C_COMMON_CLK) && (C_WRITE_MODE_A == "NO_CHANGE")) begin : async_clk_sched_clka_nc
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Read A
if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i);
end
end
endgenerate
generate
if ((!C_COMMON_CLK) && (C_WRITE_MODE_B == "WRITE_FIRST")) begin: async_clk_sched_clkb_wf
always @(posedge CLKB) begin
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
end
end
else if ((!C_COMMON_CLK) && (C_WRITE_MODE_B == "READ_FIRST")) begin: async_clk_sched_clkb_rf
always @(posedge CLKB) begin
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if ((!C_COMMON_CLK) && (C_WRITE_MODE_B == "NO_CHANGE")) begin: async_clk_sched_clkb_nc
always @(posedge CLKB) begin
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read B
if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i);
end
end
endgenerate
//***************************************************************
// Instantiate the variable depth output register stage module
//***************************************************************
// Port A
assign rsta_outp_stage = RSTA & (~SLEEP);
BLK_MEM_GEN_v8_2_output_stage
#(.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_RST_TYPE ("SYNC"),
.C_HAS_RST (C_HAS_RSTA),
.C_RSTRAM (C_RSTRAM_A),
.C_RST_PRIORITY (C_RST_PRIORITY_A),
.C_INIT_VAL (C_INITA_VAL),
.C_HAS_EN (C_HAS_ENA),
.C_HAS_REGCE (C_HAS_REGCEA),
.C_DATA_WIDTH (C_READ_WIDTH_A),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_MEM_OUTPUT_REGS (C_HAS_MEM_OUTPUT_REGS_A),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.NUM_STAGES (NUM_OUTPUT_STAGES_A),
.C_EN_ECC_PIPE (0),
.FLOP_DELAY (FLOP_DELAY))
reg_a
(.CLK (CLKA),
.RST (rsta_outp_stage),//(RSTA),
.EN (ENA),
.REGCE (REGCEA),
.DIN_I (memory_out_a),
.DOUT (DOUTA),
.SBITERR_IN_I (1'b0),
.DBITERR_IN_I (1'b0),
.SBITERR (),
.DBITERR (),
.RDADDRECC_IN_I ({C_ADDRB_WIDTH{1'b0}}),
.ECCPIPECE (1'b0),
.RDADDRECC ()
);
assign rstb_outp_stage = RSTB & (~SLEEP);
// Port B
BLK_MEM_GEN_v8_2_output_stage
#(.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_RST_TYPE ("SYNC"),
.C_HAS_RST (C_HAS_RSTB),
.C_RSTRAM (C_RSTRAM_B),
.C_RST_PRIORITY (C_RST_PRIORITY_B),
.C_INIT_VAL (C_INITB_VAL),
.C_HAS_EN (C_HAS_ENB),
.C_HAS_REGCE (C_HAS_REGCEB),
.C_DATA_WIDTH (C_READ_WIDTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_MEM_OUTPUT_REGS (C_HAS_MEM_OUTPUT_REGS_B),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.NUM_STAGES (NUM_OUTPUT_STAGES_B),
.C_EN_ECC_PIPE (C_EN_ECC_PIPE),
.FLOP_DELAY (FLOP_DELAY))
reg_b
(.CLK (CLKB),
.RST (rstb_outp_stage),//(RSTB),
.EN (ENB),
.REGCE (REGCEB),
.DIN_I (memory_out_b),
.DOUT (dout_i),
.SBITERR_IN_I (sbiterr_in),
.DBITERR_IN_I (dbiterr_in),
.SBITERR (sbiterr_i),
.DBITERR (dbiterr_i),
.RDADDRECC_IN_I (rdaddrecc_in),
.ECCPIPECE (ECCPIPECE),
.RDADDRECC (rdaddrecc_i)
);
//***************************************************************
// Instantiate the Input and Output register stages
//***************************************************************
BLK_MEM_GEN_v8_2_softecc_output_reg_stage
#(.C_DATA_WIDTH (C_READ_WIDTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B),
.C_USE_SOFTECC (C_USE_SOFTECC),
.FLOP_DELAY (FLOP_DELAY))
has_softecc_output_reg_stage
(.CLK (CLKB),
.DIN (dout_i),
.DOUT (DOUTB),
.SBITERR_IN (sbiterr_i),
.DBITERR_IN (dbiterr_i),
.SBITERR (sbiterr_sdp),
.DBITERR (dbiterr_sdp),
.RDADDRECC_IN (rdaddrecc_i),
.RDADDRECC (rdaddrecc_sdp)
);
//****************************************************
// Synchronous collision checks
//****************************************************
// CR 780544 : To make verilog model's collison warnings in consistant with
// vhdl model, the non-blocking assignments are replaced with blocking
// assignments.
generate if (!C_DISABLE_WARN_BHV_COLL && C_COMMON_CLK) begin : sync_coll
always @(posedge CLKA) begin
// Possible collision if both are enabled and the addresses match
if (ena_i && enb_i) begin
if (wea_i || web_i) begin
is_collision = collision_check(ADDRA, wea_i, ADDRB, web_i);
end else begin
is_collision = 0;
end
end else begin
is_collision = 0;
end
// If the write port is in READ_FIRST mode, there is no collision
if (C_WRITE_MODE_A=="READ_FIRST" && wea_i && !web_i) begin
is_collision = 0;
end
if (C_WRITE_MODE_B=="READ_FIRST" && web_i && !wea_i) begin
is_collision = 0;
end
// Only flag if one of the accesses is a write
if (is_collision && (wea_i || web_i)) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A %0s address: %0h, B %0s address: %0h\n",
wea_i ? "write" : "read", ADDRA,
web_i ? "write" : "read", ADDRB);
end
end
//****************************************************
// Asynchronous collision checks
//****************************************************
end else if (!C_DISABLE_WARN_BHV_COLL && !C_COMMON_CLK) begin : async_coll
// Delay A and B addresses in order to mimic setup/hold times
wire [C_ADDRA_WIDTH-1:0] #COLL_DELAY addra_delay = ADDRA;
wire [0:0] #COLL_DELAY wea_delay = wea_i;
wire #COLL_DELAY ena_delay = ena_i;
wire [C_ADDRB_WIDTH-1:0] #COLL_DELAY addrb_delay = ADDRB;
wire [0:0] #COLL_DELAY web_delay = web_i;
wire #COLL_DELAY enb_delay = enb_i;
// Do the checks w/rt A
always @(posedge CLKA) begin
// Possible collision if both are enabled and the addresses match
if (ena_i && enb_i) begin
if (wea_i || web_i) begin
is_collision_a = collision_check(ADDRA, wea_i, ADDRB, web_i);
end else begin
is_collision_a = 0;
end
end else begin
is_collision_a = 0;
end
if (ena_i && enb_delay) begin
if(wea_i || web_delay) begin
is_collision_delay_a = collision_check(ADDRA, wea_i, addrb_delay,
web_delay);
end else begin
is_collision_delay_a = 0;
end
end else begin
is_collision_delay_a = 0;
end
// Only flag if B access is a write
if (is_collision_a && web_i) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A %0s address: %0h, B write address: %0h\n",
wea_i ? "write" : "read", ADDRA, ADDRB);
end else if (is_collision_delay_a && web_delay) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A %0s address: %0h, B write address: %0h\n",
wea_i ? "write" : "read", ADDRA, addrb_delay);
end
end
// Do the checks w/rt B
always @(posedge CLKB) begin
// Possible collision if both are enabled and the addresses match
if (ena_i && enb_i) begin
if (wea_i || web_i) begin
is_collision_b = collision_check(ADDRA, wea_i, ADDRB, web_i);
end else begin
is_collision_b = 0;
end
end else begin
is_collision_b = 0;
end
if (ena_delay && enb_i) begin
if (wea_delay || web_i) begin
is_collision_delay_b = collision_check(addra_delay, wea_delay, ADDRB,
web_i);
end else begin
is_collision_delay_b = 0;
end
end else begin
is_collision_delay_b = 0;
end
// Only flag if A access is a write
if (is_collision_b && wea_i) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A write address: %0h, B %s address: %0h\n",
ADDRA, web_i ? "write" : "read", ADDRB);
end else if (is_collision_delay_b && wea_delay) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A write address: %0h, B %s address: %0h\n",
addra_delay, web_i ? "write" : "read", ADDRB);
end
end
end
endgenerate
endmodule
//*****************************************************************************
// Top module wraps Input register and Memory module
//
// This module is the top-level behavioral model and this implements the memory
// module and the input registers
//*****************************************************************************
module blk_mem_gen_v8_2
#(parameter C_CORENAME = "blk_mem_gen_v8_2",
parameter C_FAMILY = "virtex7",
parameter C_XDEVICEFAMILY = "virtex7",
parameter C_ELABORATION_DIR = "",
parameter C_INTERFACE_TYPE = 0,
parameter C_USE_BRAM_BLOCK = 0,
parameter C_CTRL_ECC_ALGO = "NONE",
parameter C_ENABLE_32BIT_ADDRESS = 0,
parameter C_AXI_TYPE = 0,
parameter C_AXI_SLAVE_TYPE = 0,
parameter C_HAS_AXI_ID = 0,
parameter C_AXI_ID_WIDTH = 4,
parameter C_MEM_TYPE = 2,
parameter C_BYTE_SIZE = 9,
parameter C_ALGORITHM = 1,
parameter C_PRIM_TYPE = 3,
parameter C_LOAD_INIT_FILE = 0,
parameter C_INIT_FILE_NAME = "",
parameter C_INIT_FILE = "",
parameter C_USE_DEFAULT_DATA = 0,
parameter C_DEFAULT_DATA = "0",
//parameter C_RST_TYPE = "SYNC",
parameter C_HAS_RSTA = 0,
parameter C_RST_PRIORITY_A = "CE",
parameter C_RSTRAM_A = 0,
parameter C_INITA_VAL = "0",
parameter C_HAS_ENA = 1,
parameter C_HAS_REGCEA = 0,
parameter C_USE_BYTE_WEA = 0,
parameter C_WEA_WIDTH = 1,
parameter C_WRITE_MODE_A = "WRITE_FIRST",
parameter C_WRITE_WIDTH_A = 32,
parameter C_READ_WIDTH_A = 32,
parameter C_WRITE_DEPTH_A = 64,
parameter C_READ_DEPTH_A = 64,
parameter C_ADDRA_WIDTH = 5,
parameter C_HAS_RSTB = 0,
parameter C_RST_PRIORITY_B = "CE",
parameter C_RSTRAM_B = 0,
parameter C_INITB_VAL = "",
parameter C_HAS_ENB = 1,
parameter C_HAS_REGCEB = 0,
parameter C_USE_BYTE_WEB = 0,
parameter C_WEB_WIDTH = 1,
parameter C_WRITE_MODE_B = "WRITE_FIRST",
parameter C_WRITE_WIDTH_B = 32,
parameter C_READ_WIDTH_B = 32,
parameter C_WRITE_DEPTH_B = 64,
parameter C_READ_DEPTH_B = 64,
parameter C_ADDRB_WIDTH = 5,
parameter C_HAS_MEM_OUTPUT_REGS_A = 0,
parameter C_HAS_MEM_OUTPUT_REGS_B = 0,
parameter C_HAS_MUX_OUTPUT_REGS_A = 0,
parameter C_HAS_MUX_OUTPUT_REGS_B = 0,
parameter C_HAS_SOFTECC_INPUT_REGS_A = 0,
parameter C_HAS_SOFTECC_OUTPUT_REGS_B= 0,
parameter C_MUX_PIPELINE_STAGES = 0,
parameter C_USE_SOFTECC = 0,
parameter C_USE_ECC = 0,
parameter C_EN_ECC_PIPE = 0,
parameter C_HAS_INJECTERR = 0,
parameter C_SIM_COLLISION_CHECK = "NONE",
parameter C_COMMON_CLK = 1,
parameter C_DISABLE_WARN_BHV_COLL = 0,
parameter C_EN_SLEEP_PIN = 0,
parameter C_USE_URAM = 0,
parameter C_EN_RDADDRA_CHG = 0,
parameter C_EN_RDADDRB_CHG = 0,
parameter C_EN_DEEPSLEEP_PIN = 0,
parameter C_EN_SHUTDOWN_PIN = 0,
parameter C_DISABLE_WARN_BHV_RANGE = 0,
parameter C_COUNT_36K_BRAM = "",
parameter C_COUNT_18K_BRAM = "",
parameter C_EST_POWER_SUMMARY = ""
)
(input clka,
input rsta,
input ena,
input regcea,
input [C_WEA_WIDTH-1:0] wea,
input [C_ADDRA_WIDTH-1:0] addra,
input [C_WRITE_WIDTH_A-1:0] dina,
output [C_READ_WIDTH_A-1:0] douta,
input clkb,
input rstb,
input enb,
input regceb,
input [C_WEB_WIDTH-1:0] web,
input [C_ADDRB_WIDTH-1:0] addrb,
input [C_WRITE_WIDTH_B-1:0] dinb,
output [C_READ_WIDTH_B-1:0] doutb,
input injectsbiterr,
input injectdbiterr,
output sbiterr,
output dbiterr,
output [C_ADDRB_WIDTH-1:0] rdaddrecc,
input eccpipece,
input sleep,
input deepsleep,
input shutdown,
//AXI BMG Input and Output Port Declarations
//AXI Global Signals
input s_aclk,
input s_aresetn,
//AXI Full/lite slave write (write side)
input [C_AXI_ID_WIDTH-1:0] s_axi_awid,
input [31:0] s_axi_awaddr,
input [7:0] s_axi_awlen,
input [2:0] s_axi_awsize,
input [1:0] s_axi_awburst,
input s_axi_awvalid,
output s_axi_awready,
input [C_WRITE_WIDTH_A-1:0] s_axi_wdata,
input [C_WEA_WIDTH-1:0] s_axi_wstrb,
input s_axi_wlast,
input s_axi_wvalid,
output s_axi_wready,
output [C_AXI_ID_WIDTH-1:0] s_axi_bid,
output [1:0] s_axi_bresp,
output s_axi_bvalid,
input s_axi_bready,
//AXI Full/lite slave read (write side)
input [C_AXI_ID_WIDTH-1:0] s_axi_arid,
input [31:0] s_axi_araddr,
input [7:0] s_axi_arlen,
input [2:0] s_axi_arsize,
input [1:0] s_axi_arburst,
input s_axi_arvalid,
output s_axi_arready,
output [C_AXI_ID_WIDTH-1:0] s_axi_rid,
output [C_WRITE_WIDTH_B-1:0] s_axi_rdata,
output [1:0] s_axi_rresp,
output s_axi_rlast,
output s_axi_rvalid,
input s_axi_rready,
//AXI Full/lite sideband signals
input s_axi_injectsbiterr,
input s_axi_injectdbiterr,
output s_axi_sbiterr,
output s_axi_dbiterr,
output [C_ADDRB_WIDTH-1:0] s_axi_rdaddrecc
);
//******************************
// Port and Generic Definitions
//******************************
//////////////////////////////////////////////////////////////////////////
// Generic Definitions
//////////////////////////////////////////////////////////////////////////
// C_CORENAME : Instance name of the Block Memory Generator core
// C_FAMILY,C_XDEVICEFAMILY: Designates architecture targeted. The following
// options are available - "spartan3", "spartan6",
// "virtex4", "virtex5", "virtex6" and "virtex6l".
// C_MEM_TYPE : Designates memory type.
// It can be
// 0 - Single Port Memory
// 1 - Simple Dual Port Memory
// 2 - True Dual Port Memory
// 3 - Single Port Read Only Memory
// 4 - Dual Port Read Only Memory
// C_BYTE_SIZE : Size of a byte (8 or 9 bits)
// C_ALGORITHM : Designates the algorithm method used
// for constructing the memory.
// It can be Fixed_Primitives, Minimum_Area or
// Low_Power
// C_PRIM_TYPE : Designates the user selected primitive used to
// construct the memory.
//
// C_LOAD_INIT_FILE : Designates the use of an initialization file to
// initialize memory contents.
// C_INIT_FILE_NAME : Memory initialization file name.
// C_USE_DEFAULT_DATA : Designates whether to fill remaining
// initialization space with default data
// C_DEFAULT_DATA : Default value of all memory locations
// not initialized by the memory
// initialization file.
// C_RST_TYPE : Type of reset - Synchronous or Asynchronous
// C_HAS_RSTA : Determines the presence of the RSTA port
// C_RST_PRIORITY_A : Determines the priority between CE and SR for
// Port A.
// C_RSTRAM_A : Determines if special reset behavior is used for
// Port A
// C_INITA_VAL : The initialization value for Port A
// C_HAS_ENA : Determines the presence of the ENA port
// C_HAS_REGCEA : Determines the presence of the REGCEA port
// C_USE_BYTE_WEA : Determines if the Byte Write is used or not.
// C_WEA_WIDTH : The width of the WEA port
// C_WRITE_MODE_A : Configurable write mode for Port A. It can be
// WRITE_FIRST, READ_FIRST or NO_CHANGE.
// C_WRITE_WIDTH_A : Memory write width for Port A.
// C_READ_WIDTH_A : Memory read width for Port A.
// C_WRITE_DEPTH_A : Memory write depth for Port A.
// C_READ_DEPTH_A : Memory read depth for Port A.
// C_ADDRA_WIDTH : Width of the ADDRA input port
// C_HAS_RSTB : Determines the presence of the RSTB port
// C_RST_PRIORITY_B : Determines the priority between CE and SR for
// Port B.
// C_RSTRAM_B : Determines if special reset behavior is used for
// Port B
// C_INITB_VAL : The initialization value for Port B
// C_HAS_ENB : Determines the presence of the ENB port
// C_HAS_REGCEB : Determines the presence of the REGCEB port
// C_USE_BYTE_WEB : Determines if the Byte Write is used or not.
// C_WEB_WIDTH : The width of the WEB port
// C_WRITE_MODE_B : Configurable write mode for Port B. It can be
// WRITE_FIRST, READ_FIRST or NO_CHANGE.
// C_WRITE_WIDTH_B : Memory write width for Port B.
// C_READ_WIDTH_B : Memory read width for Port B.
// C_WRITE_DEPTH_B : Memory write depth for Port B.
// C_READ_DEPTH_B : Memory read depth for Port B.
// C_ADDRB_WIDTH : Width of the ADDRB input port
// C_HAS_MEM_OUTPUT_REGS_A : Designates the use of a register at the output
// of the RAM primitive for Port A.
// C_HAS_MEM_OUTPUT_REGS_B : Designates the use of a register at the output
// of the RAM primitive for Port B.
// C_HAS_MUX_OUTPUT_REGS_A : Designates the use of a register at the output
// of the MUX for Port A.
// C_HAS_MUX_OUTPUT_REGS_B : Designates the use of a register at the output
// of the MUX for Port B.
// C_HAS_SOFTECC_INPUT_REGS_A :
// C_HAS_SOFTECC_OUTPUT_REGS_B :
// C_MUX_PIPELINE_STAGES : Designates the number of pipeline stages in
// between the muxes.
// C_USE_SOFTECC : Determines if the Soft ECC feature is used or
// not. Only applicable Spartan-6
// C_USE_ECC : Determines if the ECC feature is used or
// not. Only applicable for V5 and V6
// C_HAS_INJECTERR : Determines if the error injection pins
// are present or not. If the ECC feature
// is not used, this value is defaulted to
// 0, else the following are the allowed
// values:
// 0 : No INJECTSBITERR or INJECTDBITERR pins
// 1 : Only INJECTSBITERR pin exists
// 2 : Only INJECTDBITERR pin exists
// 3 : Both INJECTSBITERR and INJECTDBITERR pins exist
// C_SIM_COLLISION_CHECK : Controls the disabling of Unisim model collision
// warnings. It can be "ALL", "NONE",
// "Warnings_Only" or "Generate_X_Only".
// C_COMMON_CLK : Determins if the core has a single CLK input.
// C_DISABLE_WARN_BHV_COLL : Controls the Behavioral Model Collision warnings
// C_DISABLE_WARN_BHV_RANGE: Controls the Behavioral Model Out of Range
// warnings
//////////////////////////////////////////////////////////////////////////
// Port Definitions
//////////////////////////////////////////////////////////////////////////
// CLKA : Clock to synchronize all read and write operations of Port A.
// RSTA : Reset input to reset memory outputs to a user-defined
// reset state for Port A.
// ENA : Enable all read and write operations of Port A.
// REGCEA : Register Clock Enable to control each pipeline output
// register stages for Port A.
// WEA : Write Enable to enable all write operations of Port A.
// ADDRA : Address of Port A.
// DINA : Data input of Port A.
// DOUTA : Data output of Port A.
// CLKB : Clock to synchronize all read and write operations of Port B.
// RSTB : Reset input to reset memory outputs to a user-defined
// reset state for Port B.
// ENB : Enable all read and write operations of Port B.
// REGCEB : Register Clock Enable to control each pipeline output
// register stages for Port B.
// WEB : Write Enable to enable all write operations of Port B.
// ADDRB : Address of Port B.
// DINB : Data input of Port B.
// DOUTB : Data output of Port B.
// INJECTSBITERR : Single Bit ECC Error Injection Pin.
// INJECTDBITERR : Double Bit ECC Error Injection Pin.
// SBITERR : Output signal indicating that a Single Bit ECC Error has been
// detected and corrected.
// DBITERR : Output signal indicating that a Double Bit ECC Error has been
// detected.
// RDADDRECC : Read Address Output signal indicating address at which an
// ECC error has occurred.
//////////////////////////////////////////////////////////////////////////
wire SBITERR;
wire DBITERR;
wire S_AXI_AWREADY;
wire S_AXI_WREADY;
wire S_AXI_BVALID;
wire S_AXI_ARREADY;
wire S_AXI_RLAST;
wire S_AXI_RVALID;
wire S_AXI_SBITERR;
wire S_AXI_DBITERR;
wire [C_WEA_WIDTH-1:0] WEA = wea;
wire [C_ADDRA_WIDTH-1:0] ADDRA = addra;
wire [C_WRITE_WIDTH_A-1:0] DINA = dina;
wire [C_READ_WIDTH_A-1:0] DOUTA;
wire [C_WEB_WIDTH-1:0] WEB = web;
wire [C_ADDRB_WIDTH-1:0] ADDRB = addrb;
wire [C_WRITE_WIDTH_B-1:0] DINB = dinb;
wire [C_READ_WIDTH_B-1:0] DOUTB;
wire [C_ADDRB_WIDTH-1:0] RDADDRECC;
wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID = s_axi_awid;
wire [31:0] S_AXI_AWADDR = s_axi_awaddr;
wire [7:0] S_AXI_AWLEN = s_axi_awlen;
wire [2:0] S_AXI_AWSIZE = s_axi_awsize;
wire [1:0] S_AXI_AWBURST = s_axi_awburst;
wire [C_WRITE_WIDTH_A-1:0] S_AXI_WDATA = s_axi_wdata;
wire [C_WEA_WIDTH-1:0] S_AXI_WSTRB = s_axi_wstrb;
wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID;
wire [1:0] S_AXI_BRESP;
wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID = s_axi_arid;
wire [31:0] S_AXI_ARADDR = s_axi_araddr;
wire [7:0] S_AXI_ARLEN = s_axi_arlen;
wire [2:0] S_AXI_ARSIZE = s_axi_arsize;
wire [1:0] S_AXI_ARBURST = s_axi_arburst;
wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID;
wire [C_WRITE_WIDTH_B-1:0] S_AXI_RDATA;
wire [1:0] S_AXI_RRESP;
wire [C_ADDRB_WIDTH-1:0] S_AXI_RDADDRECC;
// Added to fix the simulation warning #CR731605
wire [C_WEB_WIDTH-1:0] WEB_parameterized = 0;
wire ECCPIPECE;
wire SLEEP;
assign CLKA = clka;
assign RSTA = rsta;
assign ENA = ena;
assign REGCEA = regcea;
assign CLKB = clkb;
assign RSTB = rstb;
assign ENB = enb;
assign REGCEB = regceb;
assign INJECTSBITERR = injectsbiterr;
assign INJECTDBITERR = injectdbiterr;
assign ECCPIPECE = eccpipece;
assign SLEEP = sleep;
assign sbiterr = SBITERR;
assign dbiterr = DBITERR;
assign S_ACLK = s_aclk;
assign S_ARESETN = s_aresetn;
assign S_AXI_AWVALID = s_axi_awvalid;
assign s_axi_awready = S_AXI_AWREADY;
assign S_AXI_WLAST = s_axi_wlast;
assign S_AXI_WVALID = s_axi_wvalid;
assign s_axi_wready = S_AXI_WREADY;
assign s_axi_bvalid = S_AXI_BVALID;
assign S_AXI_BREADY = s_axi_bready;
assign S_AXI_ARVALID = s_axi_arvalid;
assign s_axi_arready = S_AXI_ARREADY;
assign s_axi_rlast = S_AXI_RLAST;
assign s_axi_rvalid = S_AXI_RVALID;
assign S_AXI_RREADY = s_axi_rready;
assign S_AXI_INJECTSBITERR = s_axi_injectsbiterr;
assign S_AXI_INJECTDBITERR = s_axi_injectdbiterr;
assign s_axi_sbiterr = S_AXI_SBITERR;
assign s_axi_dbiterr = S_AXI_DBITERR;
assign doutb = DOUTB;
assign douta = DOUTA;
assign rdaddrecc = RDADDRECC;
assign s_axi_bid = S_AXI_BID;
assign s_axi_bresp = S_AXI_BRESP;
assign s_axi_rid = S_AXI_RID;
assign s_axi_rdata = S_AXI_RDATA;
assign s_axi_rresp = S_AXI_RRESP;
assign s_axi_rdaddrecc = S_AXI_RDADDRECC;
localparam FLOP_DELAY = 100; // 100 ps
reg injectsbiterr_in;
reg injectdbiterr_in;
reg rsta_in;
reg ena_in;
reg regcea_in;
reg [C_WEA_WIDTH-1:0] wea_in;
reg [C_ADDRA_WIDTH-1:0] addra_in;
reg [C_WRITE_WIDTH_A-1:0] dina_in;
wire [C_ADDRA_WIDTH-1:0] s_axi_awaddr_out_c;
wire [C_ADDRB_WIDTH-1:0] s_axi_araddr_out_c;
wire s_axi_wr_en_c;
wire s_axi_rd_en_c;
wire s_aresetn_a_c;
wire [7:0] s_axi_arlen_c ;
wire [C_AXI_ID_WIDTH-1 : 0] s_axi_rid_c;
wire [C_WRITE_WIDTH_B-1 : 0] s_axi_rdata_c;
wire [1:0] s_axi_rresp_c;
wire s_axi_rlast_c;
wire s_axi_rvalid_c;
wire s_axi_rready_c;
wire regceb_c;
localparam C_AXI_PAYLOAD = (C_HAS_MUX_OUTPUT_REGS_B == 1)?C_WRITE_WIDTH_B+C_AXI_ID_WIDTH+3:C_AXI_ID_WIDTH+3;
wire [C_AXI_PAYLOAD-1 : 0] s_axi_payload_c;
wire [C_AXI_PAYLOAD-1 : 0] m_axi_payload_c;
//**************
// log2roundup
//**************
function integer log2roundup (input integer data_value);
integer width;
integer cnt;
begin
width = 0;
if (data_value > 1) begin
for(cnt=1 ; cnt < data_value ; cnt = cnt * 2) begin
width = width + 1;
end //loop
end //if
log2roundup = width;
end //log2roundup
endfunction
//**************
// log2int
//**************
function integer log2int (input integer data_value);
integer width;
integer cnt;
begin
width = 0;
cnt= data_value;
for(cnt=data_value ; cnt >1 ; cnt = cnt / 2) begin
width = width + 1;
end //loop
log2int = width;
end //log2int
endfunction
//**************************************************************************
// FUNCTION : divroundup
// Returns the ceiling value of the division
// Data_value - the quantity to be divided, dividend
// Divisor - the value to divide the data_value by
//**************************************************************************
function integer divroundup (input integer data_value,input integer divisor);
integer div;
begin
div = data_value/divisor;
if ((data_value % divisor) != 0) begin
div = div+1;
end //if
divroundup = div;
end //if
endfunction
localparam AXI_FULL_MEMORY_SLAVE = ((C_AXI_SLAVE_TYPE == 0 && C_AXI_TYPE == 1)?1:0);
localparam C_AXI_ADDR_WIDTH_MSB = C_ADDRA_WIDTH+log2roundup(C_WRITE_WIDTH_A/8);
localparam C_AXI_ADDR_WIDTH = C_AXI_ADDR_WIDTH_MSB;
//Data Width Number of LSB address bits to be discarded
//1 to 16 1
//17 to 32 2
//33 to 64 3
//65 to 128 4
//129 to 256 5
//257 to 512 6
//513 to 1024 7
// The following two constants determine this.
localparam LOWER_BOUND_VAL = (log2roundup(divroundup(C_WRITE_WIDTH_A,8) == 0))?0:(log2roundup(divroundup(C_WRITE_WIDTH_A,8)));
localparam C_AXI_ADDR_WIDTH_LSB = ((AXI_FULL_MEMORY_SLAVE == 1)?0:LOWER_BOUND_VAL);
localparam C_AXI_OS_WR = 2;
//***********************************************
// INPUT REGISTERS.
//***********************************************
generate if (C_HAS_SOFTECC_INPUT_REGS_A==0) begin : no_softecc_input_reg_stage
always @* begin
injectsbiterr_in = INJECTSBITERR;
injectdbiterr_in = INJECTDBITERR;
rsta_in = RSTA;
ena_in = ENA;
regcea_in = REGCEA;
wea_in = WEA;
addra_in = ADDRA;
dina_in = DINA;
end //end always
end //end no_softecc_input_reg_stage
endgenerate
generate if (C_HAS_SOFTECC_INPUT_REGS_A==1) begin : has_softecc_input_reg_stage
always @(posedge CLKA) begin
injectsbiterr_in <= #FLOP_DELAY INJECTSBITERR;
injectdbiterr_in <= #FLOP_DELAY INJECTDBITERR;
rsta_in <= #FLOP_DELAY RSTA;
ena_in <= #FLOP_DELAY ENA;
regcea_in <= #FLOP_DELAY REGCEA;
wea_in <= #FLOP_DELAY WEA;
addra_in <= #FLOP_DELAY ADDRA;
dina_in <= #FLOP_DELAY DINA;
end //end always
end //end input_reg_stages generate statement
endgenerate
generate if ((C_INTERFACE_TYPE == 0) && (C_ENABLE_32BIT_ADDRESS == 0)) begin : native_mem_module
BLK_MEM_GEN_v8_2_mem_module
#(.C_CORENAME (C_CORENAME),
.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_MEM_TYPE (C_MEM_TYPE),
.C_BYTE_SIZE (C_BYTE_SIZE),
.C_ALGORITHM (C_ALGORITHM),
.C_USE_BRAM_BLOCK (C_USE_BRAM_BLOCK),
.C_PRIM_TYPE (C_PRIM_TYPE),
.C_LOAD_INIT_FILE (C_LOAD_INIT_FILE),
.C_INIT_FILE_NAME (C_INIT_FILE_NAME),
.C_INIT_FILE (C_INIT_FILE),
.C_USE_DEFAULT_DATA (C_USE_DEFAULT_DATA),
.C_DEFAULT_DATA (C_DEFAULT_DATA),
.C_RST_TYPE ("SYNC"),
.C_HAS_RSTA (C_HAS_RSTA),
.C_RST_PRIORITY_A (C_RST_PRIORITY_A),
.C_RSTRAM_A (C_RSTRAM_A),
.C_INITA_VAL (C_INITA_VAL),
.C_HAS_ENA (C_HAS_ENA),
.C_HAS_REGCEA (C_HAS_REGCEA),
.C_USE_BYTE_WEA (C_USE_BYTE_WEA),
.C_WEA_WIDTH (C_WEA_WIDTH),
.C_WRITE_MODE_A (C_WRITE_MODE_A),
.C_WRITE_WIDTH_A (C_WRITE_WIDTH_A),
.C_READ_WIDTH_A (C_READ_WIDTH_A),
.C_WRITE_DEPTH_A (C_WRITE_DEPTH_A),
.C_READ_DEPTH_A (C_READ_DEPTH_A),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH),
.C_HAS_RSTB (C_HAS_RSTB),
.C_RST_PRIORITY_B (C_RST_PRIORITY_B),
.C_RSTRAM_B (C_RSTRAM_B),
.C_INITB_VAL (C_INITB_VAL),
.C_HAS_ENB (C_HAS_ENB),
.C_HAS_REGCEB (C_HAS_REGCEB),
.C_USE_BYTE_WEB (C_USE_BYTE_WEB),
.C_WEB_WIDTH (C_WEB_WIDTH),
.C_WRITE_MODE_B (C_WRITE_MODE_B),
.C_WRITE_WIDTH_B (C_WRITE_WIDTH_B),
.C_READ_WIDTH_B (C_READ_WIDTH_B),
.C_WRITE_DEPTH_B (C_WRITE_DEPTH_B),
.C_READ_DEPTH_B (C_READ_DEPTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_MEM_OUTPUT_REGS_A (C_HAS_MEM_OUTPUT_REGS_A),
.C_HAS_MEM_OUTPUT_REGS_B (C_HAS_MEM_OUTPUT_REGS_B),
.C_HAS_MUX_OUTPUT_REGS_A (C_HAS_MUX_OUTPUT_REGS_A),
.C_HAS_MUX_OUTPUT_REGS_B (C_HAS_MUX_OUTPUT_REGS_B),
.C_HAS_SOFTECC_INPUT_REGS_A (C_HAS_SOFTECC_INPUT_REGS_A),
.C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B),
.C_MUX_PIPELINE_STAGES (C_MUX_PIPELINE_STAGES),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.C_HAS_INJECTERR (C_HAS_INJECTERR),
.C_SIM_COLLISION_CHECK (C_SIM_COLLISION_CHECK),
.C_COMMON_CLK (C_COMMON_CLK),
.FLOP_DELAY (FLOP_DELAY),
.C_DISABLE_WARN_BHV_COLL (C_DISABLE_WARN_BHV_COLL),
.C_EN_ECC_PIPE (C_EN_ECC_PIPE),
.C_DISABLE_WARN_BHV_RANGE (C_DISABLE_WARN_BHV_RANGE))
blk_mem_gen_v8_2_inst
(.CLKA (CLKA),
.RSTA (rsta_in),
.ENA (ena_in),
.REGCEA (regcea_in),
.WEA (wea_in),
.ADDRA (addra_in),
.DINA (dina_in),
.DOUTA (DOUTA),
.CLKB (CLKB),
.RSTB (RSTB),
.ENB (ENB),
.REGCEB (REGCEB),
.WEB (WEB),
.ADDRB (ADDRB),
.DINB (DINB),
.DOUTB (DOUTB),
.INJECTSBITERR (injectsbiterr_in),
.INJECTDBITERR (injectdbiterr_in),
.ECCPIPECE (ECCPIPECE),
.SLEEP (SLEEP),
.SBITERR (SBITERR),
.DBITERR (DBITERR),
.RDADDRECC (RDADDRECC)
);
end
endgenerate
generate if((C_INTERFACE_TYPE == 0) && (C_ENABLE_32BIT_ADDRESS == 1)) begin : native_mem_mapped_module
localparam C_ADDRA_WIDTH_ACTUAL = log2roundup(C_WRITE_DEPTH_A);
localparam C_ADDRB_WIDTH_ACTUAL = log2roundup(C_WRITE_DEPTH_B);
localparam C_ADDRA_WIDTH_MSB = C_ADDRA_WIDTH_ACTUAL+log2int(C_WRITE_WIDTH_A/8);
localparam C_ADDRB_WIDTH_MSB = C_ADDRB_WIDTH_ACTUAL+log2int(C_WRITE_WIDTH_B/8);
// localparam C_ADDRA_WIDTH_MSB = C_ADDRA_WIDTH_ACTUAL+log2roundup(C_WRITE_WIDTH_A/8);
// localparam C_ADDRB_WIDTH_MSB = C_ADDRB_WIDTH_ACTUAL+log2roundup(C_WRITE_WIDTH_B/8);
localparam C_MEM_MAP_ADDRA_WIDTH_MSB = C_ADDRA_WIDTH_MSB;
localparam C_MEM_MAP_ADDRB_WIDTH_MSB = C_ADDRB_WIDTH_MSB;
// Data Width Number of LSB address bits to be discarded
// 1 to 16 1
// 17 to 32 2
// 33 to 64 3
// 65 to 128 4
// 129 to 256 5
// 257 to 512 6
// 513 to 1024 7
// The following two constants determine this.
localparam MEM_MAP_LOWER_BOUND_VAL_A = (log2int(divroundup(C_WRITE_WIDTH_A,8)==0)) ? 0:(log2int(divroundup(C_WRITE_WIDTH_A,8)));
localparam MEM_MAP_LOWER_BOUND_VAL_B = (log2int(divroundup(C_WRITE_WIDTH_A,8)==0)) ? 0:(log2int(divroundup(C_WRITE_WIDTH_A,8)));
localparam C_MEM_MAP_ADDRA_WIDTH_LSB = MEM_MAP_LOWER_BOUND_VAL_A;
localparam C_MEM_MAP_ADDRB_WIDTH_LSB = MEM_MAP_LOWER_BOUND_VAL_B;
wire [C_ADDRB_WIDTH_ACTUAL-1 :0] rdaddrecc_i;
wire [C_ADDRB_WIDTH-1:C_MEM_MAP_ADDRB_WIDTH_MSB] msb_zero_i;
wire [C_MEM_MAP_ADDRB_WIDTH_LSB-1:0] lsb_zero_i;
assign msb_zero_i = 0;
assign lsb_zero_i = 0;
assign RDADDRECC = {msb_zero_i,rdaddrecc_i,lsb_zero_i};
BLK_MEM_GEN_v8_2_mem_module
#(.C_CORENAME (C_CORENAME),
.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_MEM_TYPE (C_MEM_TYPE),
.C_BYTE_SIZE (C_BYTE_SIZE),
.C_USE_BRAM_BLOCK (C_USE_BRAM_BLOCK),
.C_ALGORITHM (C_ALGORITHM),
.C_PRIM_TYPE (C_PRIM_TYPE),
.C_LOAD_INIT_FILE (C_LOAD_INIT_FILE),
.C_INIT_FILE_NAME (C_INIT_FILE_NAME),
.C_INIT_FILE (C_INIT_FILE),
.C_USE_DEFAULT_DATA (C_USE_DEFAULT_DATA),
.C_DEFAULT_DATA (C_DEFAULT_DATA),
.C_RST_TYPE ("SYNC"),
.C_HAS_RSTA (C_HAS_RSTA),
.C_RST_PRIORITY_A (C_RST_PRIORITY_A),
.C_RSTRAM_A (C_RSTRAM_A),
.C_INITA_VAL (C_INITA_VAL),
.C_HAS_ENA (C_HAS_ENA),
.C_HAS_REGCEA (C_HAS_REGCEA),
.C_USE_BYTE_WEA (C_USE_BYTE_WEA),
.C_WEA_WIDTH (C_WEA_WIDTH),
.C_WRITE_MODE_A (C_WRITE_MODE_A),
.C_WRITE_WIDTH_A (C_WRITE_WIDTH_A),
.C_READ_WIDTH_A (C_READ_WIDTH_A),
.C_WRITE_DEPTH_A (C_WRITE_DEPTH_A),
.C_READ_DEPTH_A (C_READ_DEPTH_A),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH_ACTUAL),
.C_HAS_RSTB (C_HAS_RSTB),
.C_RST_PRIORITY_B (C_RST_PRIORITY_B),
.C_RSTRAM_B (C_RSTRAM_B),
.C_INITB_VAL (C_INITB_VAL),
.C_HAS_ENB (C_HAS_ENB),
.C_HAS_REGCEB (C_HAS_REGCEB),
.C_USE_BYTE_WEB (C_USE_BYTE_WEB),
.C_WEB_WIDTH (C_WEB_WIDTH),
.C_WRITE_MODE_B (C_WRITE_MODE_B),
.C_WRITE_WIDTH_B (C_WRITE_WIDTH_B),
.C_READ_WIDTH_B (C_READ_WIDTH_B),
.C_WRITE_DEPTH_B (C_WRITE_DEPTH_B),
.C_READ_DEPTH_B (C_READ_DEPTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH_ACTUAL),
.C_HAS_MEM_OUTPUT_REGS_A (C_HAS_MEM_OUTPUT_REGS_A),
.C_HAS_MEM_OUTPUT_REGS_B (C_HAS_MEM_OUTPUT_REGS_B),
.C_HAS_MUX_OUTPUT_REGS_A (C_HAS_MUX_OUTPUT_REGS_A),
.C_HAS_MUX_OUTPUT_REGS_B (C_HAS_MUX_OUTPUT_REGS_B),
.C_HAS_SOFTECC_INPUT_REGS_A (C_HAS_SOFTECC_INPUT_REGS_A),
.C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B),
.C_MUX_PIPELINE_STAGES (C_MUX_PIPELINE_STAGES),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.C_HAS_INJECTERR (C_HAS_INJECTERR),
.C_SIM_COLLISION_CHECK (C_SIM_COLLISION_CHECK),
.C_COMMON_CLK (C_COMMON_CLK),
.FLOP_DELAY (FLOP_DELAY),
.C_DISABLE_WARN_BHV_COLL (C_DISABLE_WARN_BHV_COLL),
.C_EN_ECC_PIPE (C_EN_ECC_PIPE),
.C_DISABLE_WARN_BHV_RANGE (C_DISABLE_WARN_BHV_RANGE))
blk_mem_gen_v8_2_inst
(.CLKA (CLKA),
.RSTA (rsta_in),
.ENA (ena_in),
.REGCEA (regcea_in),
.WEA (wea_in),
.ADDRA (addra_in[C_MEM_MAP_ADDRA_WIDTH_MSB-1:C_MEM_MAP_ADDRA_WIDTH_LSB]),
.DINA (dina_in),
.DOUTA (DOUTA),
.CLKB (CLKB),
.RSTB (RSTB),
.ENB (ENB),
.REGCEB (REGCEB),
.WEB (WEB),
.ADDRB (ADDRB[C_MEM_MAP_ADDRB_WIDTH_MSB-1:C_MEM_MAP_ADDRB_WIDTH_LSB]),
.DINB (DINB),
.DOUTB (DOUTB),
.INJECTSBITERR (injectsbiterr_in),
.INJECTDBITERR (injectdbiterr_in),
.ECCPIPECE (ECCPIPECE),
.SLEEP (SLEEP),
.SBITERR (SBITERR),
.DBITERR (DBITERR),
.RDADDRECC (rdaddrecc_i)
);
end
endgenerate
generate if (C_HAS_MEM_OUTPUT_REGS_B == 0 && C_HAS_MUX_OUTPUT_REGS_B == 0 ) begin : no_regs
assign S_AXI_RDATA = s_axi_rdata_c;
assign S_AXI_RLAST = s_axi_rlast_c;
assign S_AXI_RVALID = s_axi_rvalid_c;
assign S_AXI_RID = s_axi_rid_c;
assign S_AXI_RRESP = s_axi_rresp_c;
assign s_axi_rready_c = S_AXI_RREADY;
end
endgenerate
generate if (C_HAS_MEM_OUTPUT_REGS_B == 1) begin : has_regceb
assign regceb_c = s_axi_rvalid_c && s_axi_rready_c;
end
endgenerate
generate if (C_HAS_MEM_OUTPUT_REGS_B == 0) begin : no_regceb
assign regceb_c = REGCEB;
end
endgenerate
generate if (C_HAS_MUX_OUTPUT_REGS_B == 1) begin : only_core_op_regs
assign s_axi_payload_c = {s_axi_rid_c,s_axi_rdata_c,s_axi_rresp_c,s_axi_rlast_c};
assign S_AXI_RID = m_axi_payload_c[C_AXI_PAYLOAD-1 : C_AXI_PAYLOAD-C_AXI_ID_WIDTH];
assign S_AXI_RDATA = m_axi_payload_c[C_AXI_PAYLOAD-C_AXI_ID_WIDTH-1 : C_AXI_PAYLOAD-C_AXI_ID_WIDTH-C_WRITE_WIDTH_B];
assign S_AXI_RRESP = m_axi_payload_c[2:1];
assign S_AXI_RLAST = m_axi_payload_c[0];
end
endgenerate
generate if (C_HAS_MEM_OUTPUT_REGS_B == 1) begin : only_emb_op_regs
assign s_axi_payload_c = {s_axi_rid_c,s_axi_rresp_c,s_axi_rlast_c};
assign S_AXI_RDATA = s_axi_rdata_c;
assign S_AXI_RID = m_axi_payload_c[C_AXI_PAYLOAD-1 : C_AXI_PAYLOAD-C_AXI_ID_WIDTH];
assign S_AXI_RRESP = m_axi_payload_c[2:1];
assign S_AXI_RLAST = m_axi_payload_c[0];
end
endgenerate
generate if (C_HAS_MUX_OUTPUT_REGS_B == 1 || C_HAS_MEM_OUTPUT_REGS_B == 1) begin : has_regs_fwd
blk_mem_axi_regs_fwd_v8_2
#(.C_DATA_WIDTH (C_AXI_PAYLOAD))
axi_regs_inst (
.ACLK (S_ACLK),
.ARESET (s_aresetn_a_c),
.S_VALID (s_axi_rvalid_c),
.S_READY (s_axi_rready_c),
.S_PAYLOAD_DATA (s_axi_payload_c),
.M_VALID (S_AXI_RVALID),
.M_READY (S_AXI_RREADY),
.M_PAYLOAD_DATA (m_axi_payload_c)
);
end
endgenerate
generate if (C_INTERFACE_TYPE == 1) begin : axi_mem_module
assign s_aresetn_a_c = !S_ARESETN;
assign S_AXI_BRESP = 2'b00;
assign s_axi_rresp_c = 2'b00;
assign s_axi_arlen_c = (C_AXI_TYPE == 1)?S_AXI_ARLEN:8'h0;
blk_mem_axi_write_wrapper_beh_v8_2
#(.C_INTERFACE_TYPE (C_INTERFACE_TYPE),
.C_AXI_TYPE (C_AXI_TYPE),
.C_AXI_SLAVE_TYPE (C_AXI_SLAVE_TYPE),
.C_MEMORY_TYPE (C_MEM_TYPE),
.C_WRITE_DEPTH_A (C_WRITE_DEPTH_A),
.C_AXI_AWADDR_WIDTH ((AXI_FULL_MEMORY_SLAVE == 1)?C_AXI_ADDR_WIDTH:C_AXI_ADDR_WIDTH-C_AXI_ADDR_WIDTH_LSB),
.C_HAS_AXI_ID (C_HAS_AXI_ID),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH),
.C_AXI_WDATA_WIDTH (C_WRITE_WIDTH_A),
.C_AXI_OS_WR (C_AXI_OS_WR))
axi_wr_fsm (
// AXI Global Signals
.S_ACLK (S_ACLK),
.S_ARESETN (s_aresetn_a_c),
// AXI Full/Lite Slave Write interface
.S_AXI_AWADDR (S_AXI_AWADDR[C_AXI_ADDR_WIDTH_MSB-1:C_AXI_ADDR_WIDTH_LSB]),
.S_AXI_AWLEN (S_AXI_AWLEN),
.S_AXI_AWID (S_AXI_AWID),
.S_AXI_AWSIZE (S_AXI_AWSIZE),
.S_AXI_AWBURST (S_AXI_AWBURST),
.S_AXI_AWVALID (S_AXI_AWVALID),
.S_AXI_AWREADY (S_AXI_AWREADY),
.S_AXI_WVALID (S_AXI_WVALID),
.S_AXI_WREADY (S_AXI_WREADY),
.S_AXI_BVALID (S_AXI_BVALID),
.S_AXI_BREADY (S_AXI_BREADY),
.S_AXI_BID (S_AXI_BID),
// Signals for BRAM interfac(
.S_AXI_AWADDR_OUT (s_axi_awaddr_out_c),
.S_AXI_WR_EN (s_axi_wr_en_c)
);
blk_mem_axi_read_wrapper_beh_v8_2
#(.C_INTERFACE_TYPE (C_INTERFACE_TYPE),
.C_AXI_TYPE (C_AXI_TYPE),
.C_AXI_SLAVE_TYPE (C_AXI_SLAVE_TYPE),
.C_MEMORY_TYPE (C_MEM_TYPE),
.C_WRITE_WIDTH_A (C_WRITE_WIDTH_A),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH),
.C_AXI_PIPELINE_STAGES (1),
.C_AXI_ARADDR_WIDTH ((AXI_FULL_MEMORY_SLAVE == 1)?C_AXI_ADDR_WIDTH:C_AXI_ADDR_WIDTH-C_AXI_ADDR_WIDTH_LSB),
.C_HAS_AXI_ID (C_HAS_AXI_ID),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH))
axi_rd_sm(
//AXI Global Signals
.S_ACLK (S_ACLK),
.S_ARESETN (s_aresetn_a_c),
//AXI Full/Lite Read Side
.S_AXI_ARADDR (S_AXI_ARADDR[C_AXI_ADDR_WIDTH_MSB-1:C_AXI_ADDR_WIDTH_LSB]),
.S_AXI_ARLEN (s_axi_arlen_c),
.S_AXI_ARSIZE (S_AXI_ARSIZE),
.S_AXI_ARBURST (S_AXI_ARBURST),
.S_AXI_ARVALID (S_AXI_ARVALID),
.S_AXI_ARREADY (S_AXI_ARREADY),
.S_AXI_RLAST (s_axi_rlast_c),
.S_AXI_RVALID (s_axi_rvalid_c),
.S_AXI_RREADY (s_axi_rready_c),
.S_AXI_ARID (S_AXI_ARID),
.S_AXI_RID (s_axi_rid_c),
//AXI Full/Lite Read FSM Outputs
.S_AXI_ARADDR_OUT (s_axi_araddr_out_c),
.S_AXI_RD_EN (s_axi_rd_en_c)
);
BLK_MEM_GEN_v8_2_mem_module
#(.C_CORENAME (C_CORENAME),
.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_MEM_TYPE (C_MEM_TYPE),
.C_BYTE_SIZE (C_BYTE_SIZE),
.C_USE_BRAM_BLOCK (C_USE_BRAM_BLOCK),
.C_ALGORITHM (C_ALGORITHM),
.C_PRIM_TYPE (C_PRIM_TYPE),
.C_LOAD_INIT_FILE (C_LOAD_INIT_FILE),
.C_INIT_FILE_NAME (C_INIT_FILE_NAME),
.C_INIT_FILE (C_INIT_FILE),
.C_USE_DEFAULT_DATA (C_USE_DEFAULT_DATA),
.C_DEFAULT_DATA (C_DEFAULT_DATA),
.C_RST_TYPE ("SYNC"),
.C_HAS_RSTA (C_HAS_RSTA),
.C_RST_PRIORITY_A (C_RST_PRIORITY_A),
.C_RSTRAM_A (C_RSTRAM_A),
.C_INITA_VAL (C_INITA_VAL),
.C_HAS_ENA (1),
.C_HAS_REGCEA (C_HAS_REGCEA),
.C_USE_BYTE_WEA (1),
.C_WEA_WIDTH (C_WEA_WIDTH),
.C_WRITE_MODE_A (C_WRITE_MODE_A),
.C_WRITE_WIDTH_A (C_WRITE_WIDTH_A),
.C_READ_WIDTH_A (C_READ_WIDTH_A),
.C_WRITE_DEPTH_A (C_WRITE_DEPTH_A),
.C_READ_DEPTH_A (C_READ_DEPTH_A),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH),
.C_HAS_RSTB (C_HAS_RSTB),
.C_RST_PRIORITY_B (C_RST_PRIORITY_B),
.C_RSTRAM_B (C_RSTRAM_B),
.C_INITB_VAL (C_INITB_VAL),
.C_HAS_ENB (1),
.C_HAS_REGCEB (C_HAS_MEM_OUTPUT_REGS_B),
.C_USE_BYTE_WEB (1),
.C_WEB_WIDTH (C_WEB_WIDTH),
.C_WRITE_MODE_B (C_WRITE_MODE_B),
.C_WRITE_WIDTH_B (C_WRITE_WIDTH_B),
.C_READ_WIDTH_B (C_READ_WIDTH_B),
.C_WRITE_DEPTH_B (C_WRITE_DEPTH_B),
.C_READ_DEPTH_B (C_READ_DEPTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_MEM_OUTPUT_REGS_A (0),
.C_HAS_MEM_OUTPUT_REGS_B (C_HAS_MEM_OUTPUT_REGS_B),
.C_HAS_MUX_OUTPUT_REGS_A (0),
.C_HAS_MUX_OUTPUT_REGS_B (0),
.C_HAS_SOFTECC_INPUT_REGS_A (C_HAS_SOFTECC_INPUT_REGS_A),
.C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B),
.C_MUX_PIPELINE_STAGES (C_MUX_PIPELINE_STAGES),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.C_HAS_INJECTERR (C_HAS_INJECTERR),
.C_SIM_COLLISION_CHECK (C_SIM_COLLISION_CHECK),
.C_COMMON_CLK (C_COMMON_CLK),
.FLOP_DELAY (FLOP_DELAY),
.C_DISABLE_WARN_BHV_COLL (C_DISABLE_WARN_BHV_COLL),
.C_EN_ECC_PIPE (0),
.C_DISABLE_WARN_BHV_RANGE (C_DISABLE_WARN_BHV_RANGE))
blk_mem_gen_v8_2_inst
(.CLKA (S_ACLK),
.RSTA (s_aresetn_a_c),
.ENA (s_axi_wr_en_c),
.REGCEA (regcea_in),
.WEA (S_AXI_WSTRB),
.ADDRA (s_axi_awaddr_out_c),
.DINA (S_AXI_WDATA),
.DOUTA (DOUTA),
.CLKB (S_ACLK),
.RSTB (s_aresetn_a_c),
.ENB (s_axi_rd_en_c),
.REGCEB (regceb_c),
.WEB (WEB_parameterized),
.ADDRB (s_axi_araddr_out_c),
.DINB (DINB),
.DOUTB (s_axi_rdata_c),
.INJECTSBITERR (injectsbiterr_in),
.INJECTDBITERR (injectdbiterr_in),
.SBITERR (SBITERR),
.DBITERR (DBITERR),
.ECCPIPECE (1'b0),
.SLEEP (1'b0),
.RDADDRECC (RDADDRECC)
);
end
endgenerate
endmodule
|
/******************************************************************************
-- (c) Copyright 2006 - 2013 Xilinx, Inc. All rights reserved.
--
-- This file contains confidential and proprietary information
-- of Xilinx, Inc. and is protected under U.S. and
-- international copyright and other intellectual property
-- laws.
--
-- DISCLAIMER
-- This disclaimer is not a license and does not grant any
-- rights to the materials distributed herewith. Except as
-- otherwise provided in a valid license issued to you by
-- Xilinx, and to the maximum extent permitted by applicable
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-- (2) Xilinx shall not be liable (whether in contract or tort,
-- including negligence, or under any other theory of
-- liability) for any loss or damage of any kind or nature
-- related to, arising under or in connection with these
-- materials, including for any direct, or any indirect,
-- special, incidental, or consequential loss or damage
-- (including loss of data, profits, goodwill, or any type of
-- loss or damage suffered as a result of any action brought
-- by a third party) even if such damage or loss was
-- reasonably foreseeable or Xilinx had been advised of the
-- possibility of the same.
--
-- CRITICAL APPLICATIONS
-- Xilinx products are not designed or intended to be fail-
-- safe, or for use in any application requiring fail-safe
-- performance, such as life-support or safety devices or
-- systems, Class III medical devices, nuclear facilities,
-- applications related to the deployment of airbags, or any
-- other applications that could lead to death, personal
-- injury, or severe property or environmental damage
-- (individually and collectively, "Critical
-- Applications"). Customer assumes the sole risk and
-- liability of any use of Xilinx products in Critical
-- Applications, subject only to applicable laws and
-- regulations governing limitations on product liability.
--
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-- PART OF THIS FILE AT ALL TIMES.
--
*****************************************************************************
*
* Filename: BLK_MEM_GEN_v8_2.v
*
* Description:
* This file is the Verilog behvarial model for the
* Block Memory Generator Core.
*
*****************************************************************************
* Author: Xilinx
*
* History: Jan 11, 2006 Initial revision
* Jun 11, 2007 Added independent register stages for
* Port A and Port B (IP1_Jm/v2.5)
* Aug 28, 2007 Added mux pipeline stages feature (IP2_Jm/v2.6)
* Mar 13, 2008 Behavioral model optimizations
* April 07, 2009 : Added support for Spartan-6 and Virtex-6
* features, including the following:
* (i) error injection, detection and/or correction
* (ii) reset priority
* (iii) special reset behavior
*
*****************************************************************************/
`timescale 1ps/1ps
module STATE_LOGIC_v8_2 (O, I0, I1, I2, I3, I4, I5);
parameter INIT = 64'h0000000000000000;
input I0, I1, I2, I3, I4, I5;
output O;
reg O;
reg tmp;
always @( I5 or I4 or I3 or I2 or I1 or I0 ) begin
tmp = I0 ^ I1 ^ I2 ^ I3 ^ I4 ^ I5;
if ( tmp == 0 || tmp == 1)
O = INIT[{I5, I4, I3, I2, I1, I0}];
end
endmodule
module beh_vlog_muxf7_v8_2 (O, I0, I1, S);
output O;
reg O;
input I0, I1, S;
always @(I0 or I1 or S)
if (S)
O = I1;
else
O = I0;
endmodule
module beh_vlog_ff_clr_v8_2 (Q, C, CLR, D);
parameter INIT = 0;
localparam FLOP_DELAY = 100;
output Q;
input C, CLR, D;
reg Q;
initial Q= 1'b0;
always @(posedge C )
if (CLR)
Q<= 1'b0;
else
Q<= #FLOP_DELAY D;
endmodule
module beh_vlog_ff_pre_v8_2 (Q, C, D, PRE);
parameter INIT = 0;
localparam FLOP_DELAY = 100;
output Q;
input C, D, PRE;
reg Q;
initial Q= 1'b0;
always @(posedge C )
if (PRE)
Q <= 1'b1;
else
Q <= #FLOP_DELAY D;
endmodule
module beh_vlog_ff_ce_clr_v8_2 (Q, C, CE, CLR, D);
parameter INIT = 0;
localparam FLOP_DELAY = 100;
output Q;
input C, CE, CLR, D;
reg Q;
initial Q= 1'b0;
always @(posedge C )
if (CLR)
Q <= 1'b0;
else if (CE)
Q <= #FLOP_DELAY D;
endmodule
module write_netlist_v8_2
#(
parameter C_AXI_TYPE = 0
)
(
S_ACLK, S_ARESETN, S_AXI_AWVALID, S_AXI_WVALID, S_AXI_BREADY,
w_last_c, bready_timeout_c, aw_ready_r, S_AXI_WREADY, S_AXI_BVALID,
S_AXI_WR_EN, addr_en_c, incr_addr_c, bvalid_c
);
input S_ACLK;
input S_ARESETN;
input S_AXI_AWVALID;
input S_AXI_WVALID;
input S_AXI_BREADY;
input w_last_c;
input bready_timeout_c;
output aw_ready_r;
output S_AXI_WREADY;
output S_AXI_BVALID;
output S_AXI_WR_EN;
output addr_en_c;
output incr_addr_c;
output bvalid_c;
//-------------------------------------------------------------------------
//AXI LITE
//-------------------------------------------------------------------------
generate if (C_AXI_TYPE == 0 ) begin : gbeh_axi_lite_sm
wire w_ready_r_7;
wire w_ready_c;
wire aw_ready_c;
wire NlwRenamedSignal_bvalid_c;
wire NlwRenamedSignal_incr_addr_c;
wire present_state_FSM_FFd3_13;
wire present_state_FSM_FFd2_14;
wire present_state_FSM_FFd1_15;
wire present_state_FSM_FFd4_16;
wire present_state_FSM_FFd4_In;
wire present_state_FSM_FFd3_In;
wire present_state_FSM_FFd2_In;
wire present_state_FSM_FFd1_In;
wire present_state_FSM_FFd4_In1_21;
wire [0:0] Mmux_aw_ready_c ;
begin
assign
S_AXI_WREADY = w_ready_r_7,
S_AXI_BVALID = NlwRenamedSignal_incr_addr_c,
S_AXI_WR_EN = NlwRenamedSignal_bvalid_c,
incr_addr_c = NlwRenamedSignal_incr_addr_c,
bvalid_c = NlwRenamedSignal_bvalid_c;
assign NlwRenamedSignal_incr_addr_c = 1'b0;
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
aw_ready_r_2 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( aw_ready_c),
.Q ( aw_ready_r)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
w_ready_r (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( w_ready_c),
.Q ( w_ready_r_7)
);
beh_vlog_ff_pre_v8_2 #(
.INIT (1'b1))
present_state_FSM_FFd4 (
.C ( S_ACLK),
.D ( present_state_FSM_FFd4_In),
.PRE ( S_ARESETN),
.Q ( present_state_FSM_FFd4_16)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd3 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd3_In),
.Q ( present_state_FSM_FFd3_13)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd2 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd2_In),
.Q ( present_state_FSM_FFd2_14)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd1 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd1_In),
.Q ( present_state_FSM_FFd1_15)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000055554440))
present_state_FSM_FFd3_In1 (
.I0 ( S_AXI_WVALID),
.I1 ( S_AXI_AWVALID),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( present_state_FSM_FFd4_16),
.I4 ( present_state_FSM_FFd3_13),
.I5 (1'b0),
.O ( present_state_FSM_FFd3_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000088880800))
present_state_FSM_FFd2_In1 (
.I0 ( S_AXI_AWVALID),
.I1 ( S_AXI_WVALID),
.I2 ( bready_timeout_c),
.I3 ( present_state_FSM_FFd2_14),
.I4 ( present_state_FSM_FFd4_16),
.I5 (1'b0),
.O ( present_state_FSM_FFd2_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000AAAA2000))
Mmux_addr_en_c_0_1 (
.I0 ( S_AXI_AWVALID),
.I1 ( bready_timeout_c),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( S_AXI_WVALID),
.I4 ( present_state_FSM_FFd4_16),
.I5 (1'b0),
.O ( addr_en_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hF5F07570F5F05500))
Mmux_w_ready_c_0_1 (
.I0 ( S_AXI_WVALID),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd3_13),
.I4 ( present_state_FSM_FFd4_16),
.I5 ( present_state_FSM_FFd2_14),
.O ( w_ready_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h88808880FFFF8880))
present_state_FSM_FFd1_In1 (
.I0 ( S_AXI_WVALID),
.I1 ( bready_timeout_c),
.I2 ( present_state_FSM_FFd3_13),
.I3 ( present_state_FSM_FFd2_14),
.I4 ( present_state_FSM_FFd1_15),
.I5 ( S_AXI_BREADY),
.O ( present_state_FSM_FFd1_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000A8))
Mmux_S_AXI_WR_EN_0_1 (
.I0 ( S_AXI_WVALID),
.I1 ( present_state_FSM_FFd2_14),
.I2 ( present_state_FSM_FFd3_13),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( NlwRenamedSignal_bvalid_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h2F0F27072F0F2200))
present_state_FSM_FFd4_In1 (
.I0 ( S_AXI_WVALID),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd3_13),
.I4 ( present_state_FSM_FFd4_16),
.I5 ( present_state_FSM_FFd2_14),
.O ( present_state_FSM_FFd4_In1_21)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000F8))
present_state_FSM_FFd4_In2 (
.I0 ( present_state_FSM_FFd1_15),
.I1 ( S_AXI_BREADY),
.I2 ( present_state_FSM_FFd4_In1_21),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( present_state_FSM_FFd4_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h7535753575305500))
Mmux_aw_ready_c_0_1 (
.I0 ( S_AXI_AWVALID),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_WVALID),
.I3 ( present_state_FSM_FFd4_16),
.I4 ( present_state_FSM_FFd3_13),
.I5 ( present_state_FSM_FFd2_14),
.O ( Mmux_aw_ready_c[0])
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000F8))
Mmux_aw_ready_c_0_2 (
.I0 ( present_state_FSM_FFd1_15),
.I1 ( S_AXI_BREADY),
.I2 ( Mmux_aw_ready_c[0]),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( aw_ready_c)
);
end
end
endgenerate
//---------------------------------------------------------------------
// AXI FULL
//---------------------------------------------------------------------
generate if (C_AXI_TYPE == 1 ) begin : gbeh_axi_full_sm
wire w_ready_r_8;
wire w_ready_c;
wire aw_ready_c;
wire NlwRenamedSig_OI_bvalid_c;
wire present_state_FSM_FFd1_16;
wire present_state_FSM_FFd4_17;
wire present_state_FSM_FFd3_18;
wire present_state_FSM_FFd2_19;
wire present_state_FSM_FFd4_In;
wire present_state_FSM_FFd3_In;
wire present_state_FSM_FFd2_In;
wire present_state_FSM_FFd1_In;
wire present_state_FSM_FFd2_In1_24;
wire present_state_FSM_FFd4_In1_25;
wire N2;
wire N4;
begin
assign
S_AXI_WREADY = w_ready_r_8,
bvalid_c = NlwRenamedSig_OI_bvalid_c,
S_AXI_BVALID = 1'b0;
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
aw_ready_r_2
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( aw_ready_c),
.Q ( aw_ready_r)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
w_ready_r
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( w_ready_c),
.Q ( w_ready_r_8)
);
beh_vlog_ff_pre_v8_2 #(
.INIT (1'b1))
present_state_FSM_FFd4
(
.C ( S_ACLK),
.D ( present_state_FSM_FFd4_In),
.PRE ( S_ARESETN),
.Q ( present_state_FSM_FFd4_17)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd3
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd3_In),
.Q ( present_state_FSM_FFd3_18)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd2
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd2_In),
.Q ( present_state_FSM_FFd2_19)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd1
(
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd1_In),
.Q ( present_state_FSM_FFd1_16)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000005540))
present_state_FSM_FFd3_In1
(
.I0 ( S_AXI_WVALID),
.I1 ( present_state_FSM_FFd4_17),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd3_18),
.I4 (1'b0),
.I5 (1'b0),
.O ( present_state_FSM_FFd3_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hBF3FBB33AF0FAA00))
Mmux_aw_ready_c_0_2
(
.I0 ( S_AXI_BREADY),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd1_16),
.I4 ( present_state_FSM_FFd4_17),
.I5 ( NlwRenamedSig_OI_bvalid_c),
.O ( aw_ready_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hAAAAAAAA20000000))
Mmux_addr_en_c_0_1
(
.I0 ( S_AXI_AWVALID),
.I1 ( bready_timeout_c),
.I2 ( present_state_FSM_FFd2_19),
.I3 ( S_AXI_WVALID),
.I4 ( w_last_c),
.I5 ( present_state_FSM_FFd4_17),
.O ( addr_en_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000A8))
Mmux_S_AXI_WR_EN_0_1
(
.I0 ( S_AXI_WVALID),
.I1 ( present_state_FSM_FFd2_19),
.I2 ( present_state_FSM_FFd3_18),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( S_AXI_WR_EN)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000002220))
Mmux_incr_addr_c_0_1
(
.I0 ( S_AXI_WVALID),
.I1 ( w_last_c),
.I2 ( present_state_FSM_FFd2_19),
.I3 ( present_state_FSM_FFd3_18),
.I4 (1'b0),
.I5 (1'b0),
.O ( incr_addr_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000008880))
Mmux_aw_ready_c_0_11
(
.I0 ( S_AXI_WVALID),
.I1 ( w_last_c),
.I2 ( present_state_FSM_FFd2_19),
.I3 ( present_state_FSM_FFd3_18),
.I4 (1'b0),
.I5 (1'b0),
.O ( NlwRenamedSig_OI_bvalid_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h000000000000D5C0))
present_state_FSM_FFd2_In1
(
.I0 ( w_last_c),
.I1 ( S_AXI_AWVALID),
.I2 ( present_state_FSM_FFd4_17),
.I3 ( present_state_FSM_FFd3_18),
.I4 (1'b0),
.I5 (1'b0),
.O ( present_state_FSM_FFd2_In1_24)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hFFFFAAAA08AAAAAA))
present_state_FSM_FFd2_In2
(
.I0 ( present_state_FSM_FFd2_19),
.I1 ( S_AXI_AWVALID),
.I2 ( bready_timeout_c),
.I3 ( w_last_c),
.I4 ( S_AXI_WVALID),
.I5 ( present_state_FSM_FFd2_In1_24),
.O ( present_state_FSM_FFd2_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00C0004000C00000))
present_state_FSM_FFd4_In1
(
.I0 ( S_AXI_AWVALID),
.I1 ( w_last_c),
.I2 ( S_AXI_WVALID),
.I3 ( bready_timeout_c),
.I4 ( present_state_FSM_FFd3_18),
.I5 ( present_state_FSM_FFd2_19),
.O ( present_state_FSM_FFd4_In1_25)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000FFFF88F8))
present_state_FSM_FFd4_In2
(
.I0 ( present_state_FSM_FFd1_16),
.I1 ( S_AXI_BREADY),
.I2 ( present_state_FSM_FFd4_17),
.I3 ( S_AXI_AWVALID),
.I4 ( present_state_FSM_FFd4_In1_25),
.I5 (1'b0),
.O ( present_state_FSM_FFd4_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000007))
Mmux_w_ready_c_0_SW0
(
.I0 ( w_last_c),
.I1 ( S_AXI_WVALID),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( N2)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hFABAFABAFAAAF000))
Mmux_w_ready_c_0_Q
(
.I0 ( N2),
.I1 ( bready_timeout_c),
.I2 ( S_AXI_AWVALID),
.I3 ( present_state_FSM_FFd4_17),
.I4 ( present_state_FSM_FFd3_18),
.I5 ( present_state_FSM_FFd2_19),
.O ( w_ready_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000008))
Mmux_aw_ready_c_0_11_SW0
(
.I0 ( bready_timeout_c),
.I1 ( S_AXI_WVALID),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O ( N4)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h88808880FFFF8880))
present_state_FSM_FFd1_In1
(
.I0 ( w_last_c),
.I1 ( N4),
.I2 ( present_state_FSM_FFd2_19),
.I3 ( present_state_FSM_FFd3_18),
.I4 ( present_state_FSM_FFd1_16),
.I5 ( S_AXI_BREADY),
.O ( present_state_FSM_FFd1_In)
);
end
end
endgenerate
endmodule
module read_netlist_v8_2 #(
parameter C_AXI_TYPE = 1,
parameter C_ADDRB_WIDTH = 12
) ( S_AXI_R_LAST_INT, S_ACLK, S_ARESETN, S_AXI_ARVALID,
S_AXI_RREADY,S_AXI_INCR_ADDR,S_AXI_ADDR_EN,
S_AXI_SINGLE_TRANS,S_AXI_MUX_SEL, S_AXI_R_LAST, S_AXI_ARREADY,
S_AXI_RLAST, S_AXI_RVALID, S_AXI_RD_EN, S_AXI_ARLEN);
input S_AXI_R_LAST_INT;
input S_ACLK;
input S_ARESETN;
input S_AXI_ARVALID;
input S_AXI_RREADY;
output S_AXI_INCR_ADDR;
output S_AXI_ADDR_EN;
output S_AXI_SINGLE_TRANS;
output S_AXI_MUX_SEL;
output S_AXI_R_LAST;
output S_AXI_ARREADY;
output S_AXI_RLAST;
output S_AXI_RVALID;
output S_AXI_RD_EN;
input [7:0] S_AXI_ARLEN;
wire present_state_FSM_FFd1_13 ;
wire present_state_FSM_FFd2_14 ;
wire gaxi_full_sm_outstanding_read_r_15 ;
wire gaxi_full_sm_ar_ready_r_16 ;
wire gaxi_full_sm_r_last_r_17 ;
wire NlwRenamedSig_OI_gaxi_full_sm_r_valid_r ;
wire gaxi_full_sm_r_valid_c ;
wire S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o ;
wire gaxi_full_sm_ar_ready_c ;
wire gaxi_full_sm_outstanding_read_c ;
wire NlwRenamedSig_OI_S_AXI_R_LAST ;
wire S_AXI_ARLEN_7_GND_8_o_equal_1_o ;
wire present_state_FSM_FFd2_In ;
wire present_state_FSM_FFd1_In ;
wire Mmux_S_AXI_R_LAST13 ;
wire N01 ;
wire N2 ;
wire Mmux_gaxi_full_sm_ar_ready_c11 ;
wire N4 ;
wire N8 ;
wire N9 ;
wire N10 ;
wire N11 ;
wire N12 ;
wire N13 ;
assign
S_AXI_R_LAST = NlwRenamedSig_OI_S_AXI_R_LAST,
S_AXI_ARREADY = gaxi_full_sm_ar_ready_r_16,
S_AXI_RLAST = gaxi_full_sm_r_last_r_17,
S_AXI_RVALID = NlwRenamedSig_OI_gaxi_full_sm_r_valid_r;
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
gaxi_full_sm_outstanding_read_r (
.C (S_ACLK),
.CLR(S_ARESETN),
.D(gaxi_full_sm_outstanding_read_c),
.Q(gaxi_full_sm_outstanding_read_r_15)
);
beh_vlog_ff_ce_clr_v8_2 #(
.INIT (1'b0))
gaxi_full_sm_r_valid_r (
.C (S_ACLK),
.CE (S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o),
.CLR (S_ARESETN),
.D (gaxi_full_sm_r_valid_c),
.Q (NlwRenamedSig_OI_gaxi_full_sm_r_valid_r)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
gaxi_full_sm_ar_ready_r (
.C (S_ACLK),
.CLR (S_ARESETN),
.D (gaxi_full_sm_ar_ready_c),
.Q (gaxi_full_sm_ar_ready_r_16)
);
beh_vlog_ff_ce_clr_v8_2 #(
.INIT(1'b0))
gaxi_full_sm_r_last_r (
.C (S_ACLK),
.CE (S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o),
.CLR (S_ARESETN),
.D (NlwRenamedSig_OI_S_AXI_R_LAST),
.Q (gaxi_full_sm_r_last_r_17)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd2 (
.C ( S_ACLK),
.CLR ( S_ARESETN),
.D ( present_state_FSM_FFd2_In),
.Q ( present_state_FSM_FFd2_14)
);
beh_vlog_ff_clr_v8_2 #(
.INIT (1'b0))
present_state_FSM_FFd1 (
.C (S_ACLK),
.CLR (S_ARESETN),
.D (present_state_FSM_FFd1_In),
.Q (present_state_FSM_FFd1_13)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h000000000000000B))
S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o1 (
.I0 ( S_AXI_RREADY),
.I1 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O (S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000008))
Mmux_S_AXI_SINGLE_TRANS11 (
.I0 (S_AXI_ARVALID),
.I1 (S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O (S_AXI_SINGLE_TRANS)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000004))
Mmux_S_AXI_ADDR_EN11 (
.I0 (present_state_FSM_FFd1_13),
.I1 (S_AXI_ARVALID),
.I2 (1'b0),
.I3 (1'b0),
.I4 (1'b0),
.I5 (1'b0),
.O (S_AXI_ADDR_EN)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hECEE2022EEEE2022))
present_state_FSM_FFd2_In1 (
.I0 ( S_AXI_ARVALID),
.I1 ( present_state_FSM_FFd1_13),
.I2 ( S_AXI_RREADY),
.I3 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I4 ( present_state_FSM_FFd2_14),
.I5 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.O ( present_state_FSM_FFd2_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000044440444))
Mmux_S_AXI_R_LAST131 (
.I0 ( present_state_FSM_FFd1_13),
.I1 ( S_AXI_ARVALID),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I4 ( S_AXI_RREADY),
.I5 (1'b0),
.O ( Mmux_S_AXI_R_LAST13)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h4000FFFF40004000))
Mmux_S_AXI_INCR_ADDR11 (
.I0 ( S_AXI_R_LAST_INT),
.I1 ( S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( present_state_FSM_FFd1_13),
.I4 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I5 ( Mmux_S_AXI_R_LAST13),
.O ( S_AXI_INCR_ADDR)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000FE))
S_AXI_ARLEN_7_GND_8_o_equal_1_o_7_SW0 (
.I0 ( S_AXI_ARLEN[2]),
.I1 ( S_AXI_ARLEN[1]),
.I2 ( S_AXI_ARLEN[0]),
.I3 ( 1'b0),
.I4 ( 1'b0),
.I5 ( 1'b0),
.O ( N01)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000001))
S_AXI_ARLEN_7_GND_8_o_equal_1_o_7_Q (
.I0 ( S_AXI_ARLEN[7]),
.I1 ( S_AXI_ARLEN[6]),
.I2 ( S_AXI_ARLEN[5]),
.I3 ( S_AXI_ARLEN[4]),
.I4 ( S_AXI_ARLEN[3]),
.I5 ( N01),
.O ( S_AXI_ARLEN_7_GND_8_o_equal_1_o)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000000007))
Mmux_gaxi_full_sm_outstanding_read_c1_SW0 (
.I0 ( S_AXI_ARVALID),
.I1 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I2 ( 1'b0),
.I3 ( 1'b0),
.I4 ( 1'b0),
.I5 ( 1'b0),
.O ( N2)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0020000002200200))
Mmux_gaxi_full_sm_outstanding_read_c1 (
.I0 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I1 ( S_AXI_RREADY),
.I2 ( present_state_FSM_FFd1_13),
.I3 ( present_state_FSM_FFd2_14),
.I4 ( gaxi_full_sm_outstanding_read_r_15),
.I5 ( N2),
.O ( gaxi_full_sm_outstanding_read_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000000004555))
Mmux_gaxi_full_sm_ar_ready_c12 (
.I0 ( S_AXI_ARVALID),
.I1 ( S_AXI_RREADY),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I4 ( 1'b0),
.I5 ( 1'b0),
.O ( Mmux_gaxi_full_sm_ar_ready_c11)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000000000EF))
Mmux_S_AXI_R_LAST11_SW0 (
.I0 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I1 ( S_AXI_RREADY),
.I2 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I3 ( 1'b0),
.I4 ( 1'b0),
.I5 ( 1'b0),
.O ( N4)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hFCAAFC0A00AA000A))
Mmux_S_AXI_R_LAST11 (
.I0 ( S_AXI_ARVALID),
.I1 ( gaxi_full_sm_outstanding_read_r_15),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( present_state_FSM_FFd1_13),
.I4 ( N4),
.I5 ( S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o),
.O ( gaxi_full_sm_r_valid_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000AAAAAA08))
S_AXI_MUX_SEL1 (
.I0 (present_state_FSM_FFd1_13),
.I1 (NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I2 (S_AXI_RREADY),
.I3 (present_state_FSM_FFd2_14),
.I4 (gaxi_full_sm_outstanding_read_r_15),
.I5 (1'b0),
.O (S_AXI_MUX_SEL)
);
STATE_LOGIC_v8_2 #(
.INIT (64'hF3F3F755A2A2A200))
Mmux_S_AXI_RD_EN11 (
.I0 ( present_state_FSM_FFd1_13),
.I1 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I2 ( S_AXI_RREADY),
.I3 ( gaxi_full_sm_outstanding_read_r_15),
.I4 ( present_state_FSM_FFd2_14),
.I5 ( S_AXI_ARVALID),
.O ( S_AXI_RD_EN)
);
beh_vlog_muxf7_v8_2 present_state_FSM_FFd1_In3 (
.I0 ( N8),
.I1 ( N9),
.S ( present_state_FSM_FFd1_13),
.O ( present_state_FSM_FFd1_In)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h000000005410F4F0))
present_state_FSM_FFd1_In3_F (
.I0 ( S_AXI_RREADY),
.I1 ( present_state_FSM_FFd2_14),
.I2 ( S_AXI_ARVALID),
.I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I4 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I5 ( 1'b0),
.O ( N8)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000072FF7272))
present_state_FSM_FFd1_In3_G (
.I0 ( present_state_FSM_FFd2_14),
.I1 ( S_AXI_R_LAST_INT),
.I2 ( gaxi_full_sm_outstanding_read_r_15),
.I3 ( S_AXI_RREADY),
.I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I5 ( 1'b0),
.O ( N9)
);
beh_vlog_muxf7_v8_2 Mmux_gaxi_full_sm_ar_ready_c14 (
.I0 ( N10),
.I1 ( N11),
.S ( present_state_FSM_FFd1_13),
.O ( gaxi_full_sm_ar_ready_c)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000FFFF88A8))
Mmux_gaxi_full_sm_ar_ready_c14_F (
.I0 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I1 ( S_AXI_RREADY),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I4 ( Mmux_gaxi_full_sm_ar_ready_c11),
.I5 ( 1'b0),
.O ( N10)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h000000008D008D8D))
Mmux_gaxi_full_sm_ar_ready_c14_G (
.I0 ( present_state_FSM_FFd2_14),
.I1 ( S_AXI_R_LAST_INT),
.I2 ( gaxi_full_sm_outstanding_read_r_15),
.I3 ( S_AXI_RREADY),
.I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I5 ( 1'b0),
.O ( N11)
);
beh_vlog_muxf7_v8_2 Mmux_S_AXI_R_LAST1 (
.I0 ( N12),
.I1 ( N13),
.S ( present_state_FSM_FFd1_13),
.O ( NlwRenamedSig_OI_S_AXI_R_LAST)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h0000000088088888))
Mmux_S_AXI_R_LAST1_F (
.I0 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o),
.I1 ( S_AXI_ARVALID),
.I2 ( present_state_FSM_FFd2_14),
.I3 ( S_AXI_RREADY),
.I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I5 ( 1'b0),
.O ( N12)
);
STATE_LOGIC_v8_2 #(
.INIT (64'h00000000E400E4E4))
Mmux_S_AXI_R_LAST1_G (
.I0 ( present_state_FSM_FFd2_14),
.I1 ( gaxi_full_sm_outstanding_read_r_15),
.I2 ( S_AXI_R_LAST_INT),
.I3 ( S_AXI_RREADY),
.I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r),
.I5 ( 1'b0),
.O ( N13)
);
endmodule
module blk_mem_axi_write_wrapper_beh_v8_2
# (
// AXI Interface related parameters start here
parameter C_INTERFACE_TYPE = 0, // 0: Native Interface; 1: AXI Interface
parameter C_AXI_TYPE = 0, // 0: AXI Lite; 1: AXI Full;
parameter C_AXI_SLAVE_TYPE = 0, // 0: MEMORY SLAVE; 1: PERIPHERAL SLAVE;
parameter C_MEMORY_TYPE = 0, // 0: SP-RAM, 1: SDP-RAM; 2: TDP-RAM; 3: DP-ROM;
parameter C_WRITE_DEPTH_A = 0,
parameter C_AXI_AWADDR_WIDTH = 32,
parameter C_ADDRA_WIDTH = 12,
parameter C_AXI_WDATA_WIDTH = 32,
parameter C_HAS_AXI_ID = 0,
parameter C_AXI_ID_WIDTH = 4,
// AXI OUTSTANDING WRITES
parameter C_AXI_OS_WR = 2
)
(
// AXI Global Signals
input S_ACLK,
input S_ARESETN,
// AXI Full/Lite Slave Write Channel (write side)
input [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input [C_AXI_AWADDR_WIDTH-1:0] S_AXI_AWADDR,
input [8-1:0] S_AXI_AWLEN,
input [2:0] S_AXI_AWSIZE,
input [1:0] S_AXI_AWBURST,
input S_AXI_AWVALID,
output S_AXI_AWREADY,
input S_AXI_WVALID,
output S_AXI_WREADY,
output reg [C_AXI_ID_WIDTH-1:0] S_AXI_BID = 0,
output S_AXI_BVALID,
input S_AXI_BREADY,
// Signals for BMG interface
output [C_ADDRA_WIDTH-1:0] S_AXI_AWADDR_OUT,
output S_AXI_WR_EN
);
localparam FLOP_DELAY = 100; // 100 ps
localparam C_RANGE = ((C_AXI_WDATA_WIDTH == 8)?0:
((C_AXI_WDATA_WIDTH==16)?1:
((C_AXI_WDATA_WIDTH==32)?2:
((C_AXI_WDATA_WIDTH==64)?3:
((C_AXI_WDATA_WIDTH==128)?4:
((C_AXI_WDATA_WIDTH==256)?5:0))))));
wire bvalid_c ;
reg bready_timeout_c = 0;
wire [1:0] bvalid_rd_cnt_c;
reg bvalid_r = 0;
reg [2:0] bvalid_count_r = 0;
reg [((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?
C_AXI_AWADDR_WIDTH:C_ADDRA_WIDTH)-1:0] awaddr_reg = 0;
reg [1:0] bvalid_wr_cnt_r = 0;
reg [1:0] bvalid_rd_cnt_r = 0;
wire w_last_c ;
wire addr_en_c ;
wire incr_addr_c ;
wire aw_ready_r ;
wire dec_alen_c ;
reg bvalid_d1_c = 0;
reg [7:0] awlen_cntr_r = 0;
reg [7:0] awlen_int = 0;
reg [1:0] awburst_int = 0;
integer total_bytes = 0;
integer wrap_boundary = 0;
integer wrap_base_addr = 0;
integer num_of_bytes_c = 0;
integer num_of_bytes_r = 0;
// Array to store BIDs
reg [C_AXI_ID_WIDTH-1:0] axi_bid_array[3:0] ;
wire S_AXI_BVALID_axi_wr_fsm;
//-------------------------------------
//AXI WRITE FSM COMPONENT INSTANTIATION
//-------------------------------------
write_netlist_v8_2 #(.C_AXI_TYPE(C_AXI_TYPE)) axi_wr_fsm
(
.S_ACLK(S_ACLK),
.S_ARESETN(S_ARESETN),
.S_AXI_AWVALID(S_AXI_AWVALID),
.aw_ready_r(aw_ready_r),
.S_AXI_WVALID(S_AXI_WVALID),
.S_AXI_WREADY(S_AXI_WREADY),
.S_AXI_BREADY(S_AXI_BREADY),
.S_AXI_WR_EN(S_AXI_WR_EN),
.w_last_c(w_last_c),
.bready_timeout_c(bready_timeout_c),
.addr_en_c(addr_en_c),
.incr_addr_c(incr_addr_c),
.bvalid_c(bvalid_c),
.S_AXI_BVALID (S_AXI_BVALID_axi_wr_fsm)
);
//Wrap Address boundary calculation
always@(*) begin
num_of_bytes_c = 2**((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_AWSIZE:0);
total_bytes = (num_of_bytes_r)*(awlen_int+1);
wrap_base_addr = ((awaddr_reg)/((total_bytes==0)?1:total_bytes))*(total_bytes);
wrap_boundary = wrap_base_addr+total_bytes;
end
//-------------------------------------------------------------------------
// BMG address generation
//-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
awaddr_reg <= 0;
num_of_bytes_r <= 0;
awburst_int <= 0;
end else begin
if (addr_en_c == 1'b1) begin
awaddr_reg <= #FLOP_DELAY S_AXI_AWADDR ;
num_of_bytes_r <= num_of_bytes_c;
awburst_int <= ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_AWBURST:2'b01);
end else if (incr_addr_c == 1'b1) begin
if (awburst_int == 2'b10) begin
if(awaddr_reg == (wrap_boundary-num_of_bytes_r)) begin
awaddr_reg <= wrap_base_addr;
end else begin
awaddr_reg <= awaddr_reg + num_of_bytes_r;
end
end else if (awburst_int == 2'b01 || awburst_int == 2'b11) begin
awaddr_reg <= awaddr_reg + num_of_bytes_r;
end
end
end
end
assign S_AXI_AWADDR_OUT = ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?
awaddr_reg[C_AXI_AWADDR_WIDTH-1:C_RANGE]:awaddr_reg);
//-------------------------------------------------------------------------
// AXI wlast generation
//-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
awlen_cntr_r <= 0;
awlen_int <= 0;
end else begin
if (addr_en_c == 1'b1) begin
awlen_int <= #FLOP_DELAY (C_AXI_TYPE == 0?0:S_AXI_AWLEN) ;
awlen_cntr_r <= #FLOP_DELAY (C_AXI_TYPE == 0?0:S_AXI_AWLEN) ;
end else if (dec_alen_c == 1'b1) begin
awlen_cntr_r <= #FLOP_DELAY awlen_cntr_r - 1 ;
end
end
end
assign w_last_c = (awlen_cntr_r == 0 && S_AXI_WVALID == 1'b1)?1'b1:1'b0;
assign dec_alen_c = (incr_addr_c | w_last_c);
//-------------------------------------------------------------------------
// Generation of bvalid counter for outstanding transactions
//-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
bvalid_count_r <= 0;
end else begin
// bvalid_count_r generation
if (bvalid_c == 1'b1 && bvalid_r == 1'b1 && S_AXI_BREADY == 1'b1) begin
bvalid_count_r <= #FLOP_DELAY bvalid_count_r ;
end else if (bvalid_c == 1'b1) begin
bvalid_count_r <= #FLOP_DELAY bvalid_count_r + 1 ;
end else if (bvalid_r == 1'b1 && S_AXI_BREADY == 1'b1 && bvalid_count_r != 0) begin
bvalid_count_r <= #FLOP_DELAY bvalid_count_r - 1 ;
end
end
end
//-------------------------------------------------------------------------
// Generation of bvalid when BID is used
//-------------------------------------------------------------------------
generate if (C_HAS_AXI_ID == 1) begin:gaxi_bvalid_id_r
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
bvalid_r <= 0;
bvalid_d1_c <= 0;
end else begin
// Delay the generation o bvalid_r for generation for BID
bvalid_d1_c <= bvalid_c;
//external bvalid signal generation
if (bvalid_d1_c == 1'b1) begin
bvalid_r <= #FLOP_DELAY 1'b1 ;
end else if (bvalid_count_r <= 1 && S_AXI_BREADY == 1'b1) begin
bvalid_r <= #FLOP_DELAY 0 ;
end
end
end
end
endgenerate
//-------------------------------------------------------------------------
// Generation of bvalid when BID is not used
//-------------------------------------------------------------------------
generate if(C_HAS_AXI_ID == 0) begin:gaxi_bvalid_noid_r
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
bvalid_r <= 0;
end else begin
//external bvalid signal generation
if (bvalid_c == 1'b1) begin
bvalid_r <= #FLOP_DELAY 1'b1 ;
end else if (bvalid_count_r <= 1 && S_AXI_BREADY == 1'b1) begin
bvalid_r <= #FLOP_DELAY 0 ;
end
end
end
end
endgenerate
//-------------------------------------------------------------------------
// Generation of Bready timeout
//-------------------------------------------------------------------------
always @(bvalid_count_r) begin
// bready_timeout_c generation
if(bvalid_count_r == C_AXI_OS_WR-1) begin
bready_timeout_c <= 1'b1;
end else begin
bready_timeout_c <= 1'b0;
end
end
//-------------------------------------------------------------------------
// Generation of BID
//-------------------------------------------------------------------------
generate if(C_HAS_AXI_ID == 1) begin:gaxi_bid_gen
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
bvalid_wr_cnt_r <= 0;
bvalid_rd_cnt_r <= 0;
end else begin
// STORE AWID IN AN ARRAY
if(bvalid_c == 1'b1) begin
bvalid_wr_cnt_r <= bvalid_wr_cnt_r + 1;
end
// generate BID FROM AWID ARRAY
bvalid_rd_cnt_r <= #FLOP_DELAY bvalid_rd_cnt_c ;
S_AXI_BID <= axi_bid_array[bvalid_rd_cnt_c];
end
end
assign bvalid_rd_cnt_c = (bvalid_r == 1'b1 && S_AXI_BREADY == 1'b1)?bvalid_rd_cnt_r+1:bvalid_rd_cnt_r;
//-------------------------------------------------------------------------
// Storing AWID for generation of BID
//-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if(S_ARESETN == 1'b1) begin
axi_bid_array[0] = 0;
axi_bid_array[1] = 0;
axi_bid_array[2] = 0;
axi_bid_array[3] = 0;
end else if(aw_ready_r == 1'b1 && S_AXI_AWVALID == 1'b1) begin
axi_bid_array[bvalid_wr_cnt_r] <= S_AXI_AWID;
end
end
end
endgenerate
assign S_AXI_BVALID = bvalid_r;
assign S_AXI_AWREADY = aw_ready_r;
endmodule
module blk_mem_axi_read_wrapper_beh_v8_2
# (
//// AXI Interface related parameters start here
parameter C_INTERFACE_TYPE = 0,
parameter C_AXI_TYPE = 0,
parameter C_AXI_SLAVE_TYPE = 0,
parameter C_MEMORY_TYPE = 0,
parameter C_WRITE_WIDTH_A = 4,
parameter C_WRITE_DEPTH_A = 32,
parameter C_ADDRA_WIDTH = 12,
parameter C_AXI_PIPELINE_STAGES = 0,
parameter C_AXI_ARADDR_WIDTH = 12,
parameter C_HAS_AXI_ID = 0,
parameter C_AXI_ID_WIDTH = 4,
parameter C_ADDRB_WIDTH = 12
)
(
//// AXI Global Signals
input S_ACLK,
input S_ARESETN,
//// AXI Full/Lite Slave Read (Read side)
input [C_AXI_ARADDR_WIDTH-1:0] S_AXI_ARADDR,
input [7:0] S_AXI_ARLEN,
input [2:0] S_AXI_ARSIZE,
input [1:0] S_AXI_ARBURST,
input S_AXI_ARVALID,
output S_AXI_ARREADY,
output S_AXI_RLAST,
output S_AXI_RVALID,
input S_AXI_RREADY,
input [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
output reg [C_AXI_ID_WIDTH-1:0] S_AXI_RID = 0,
//// AXI Full/Lite Read Address Signals to BRAM
output [C_ADDRB_WIDTH-1:0] S_AXI_ARADDR_OUT,
output S_AXI_RD_EN
);
localparam FLOP_DELAY = 100; // 100 ps
localparam C_RANGE = ((C_WRITE_WIDTH_A == 8)?0:
((C_WRITE_WIDTH_A==16)?1:
((C_WRITE_WIDTH_A==32)?2:
((C_WRITE_WIDTH_A==64)?3:
((C_WRITE_WIDTH_A==128)?4:
((C_WRITE_WIDTH_A==256)?5:0))))));
reg [C_AXI_ID_WIDTH-1:0] ar_id_r=0;
wire addr_en_c;
wire rd_en_c;
wire incr_addr_c;
wire single_trans_c;
wire dec_alen_c;
wire mux_sel_c;
wire r_last_c;
wire r_last_int_c;
wire [C_ADDRB_WIDTH-1 : 0] araddr_out;
reg [7:0] arlen_int_r=0;
reg [7:0] arlen_cntr=8'h01;
reg [1:0] arburst_int_c=0;
reg [1:0] arburst_int_r=0;
reg [((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?
C_AXI_ARADDR_WIDTH:C_ADDRA_WIDTH)-1:0] araddr_reg =0;
integer num_of_bytes_c = 0;
integer total_bytes = 0;
integer num_of_bytes_r = 0;
integer wrap_base_addr_r = 0;
integer wrap_boundary_r = 0;
reg [7:0] arlen_int_c=0;
integer total_bytes_c = 0;
integer wrap_base_addr_c = 0;
integer wrap_boundary_c = 0;
assign dec_alen_c = incr_addr_c | r_last_int_c;
read_netlist_v8_2
#(.C_AXI_TYPE (1),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH))
axi_read_fsm (
.S_AXI_INCR_ADDR(incr_addr_c),
.S_AXI_ADDR_EN(addr_en_c),
.S_AXI_SINGLE_TRANS(single_trans_c),
.S_AXI_MUX_SEL(mux_sel_c),
.S_AXI_R_LAST(r_last_c),
.S_AXI_R_LAST_INT(r_last_int_c),
//// AXI Global Signals
.S_ACLK(S_ACLK),
.S_ARESETN(S_ARESETN),
//// AXI Full/Lite Slave Read (Read side)
.S_AXI_ARLEN(S_AXI_ARLEN),
.S_AXI_ARVALID(S_AXI_ARVALID),
.S_AXI_ARREADY(S_AXI_ARREADY),
.S_AXI_RLAST(S_AXI_RLAST),
.S_AXI_RVALID(S_AXI_RVALID),
.S_AXI_RREADY(S_AXI_RREADY),
//// AXI Full/Lite Read Address Signals to BRAM
.S_AXI_RD_EN(rd_en_c)
);
always@(*) begin
num_of_bytes_c = 2**((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_ARSIZE:0);
total_bytes = (num_of_bytes_r)*(arlen_int_r+1);
wrap_base_addr_r = ((araddr_reg)/(total_bytes==0?1:total_bytes))*(total_bytes);
wrap_boundary_r = wrap_base_addr_r+total_bytes;
//////// combinatorial from interface
arlen_int_c = (C_AXI_TYPE == 0?0:S_AXI_ARLEN);
total_bytes_c = (num_of_bytes_c)*(arlen_int_c+1);
wrap_base_addr_c = ((S_AXI_ARADDR)/(total_bytes_c==0?1:total_bytes_c))*(total_bytes_c);
wrap_boundary_c = wrap_base_addr_c+total_bytes_c;
arburst_int_c = ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_ARBURST:1);
end
////-------------------------------------------------------------------------
//// BMG address generation
////-------------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
araddr_reg <= 0;
arburst_int_r <= 0;
num_of_bytes_r <= 0;
end else begin
if (incr_addr_c == 1'b1 && addr_en_c == 1'b1 && single_trans_c == 1'b0) begin
arburst_int_r <= arburst_int_c;
num_of_bytes_r <= num_of_bytes_c;
if (arburst_int_c == 2'b10) begin
if(S_AXI_ARADDR == (wrap_boundary_c-num_of_bytes_c)) begin
araddr_reg <= wrap_base_addr_c;
end else begin
araddr_reg <= S_AXI_ARADDR + num_of_bytes_c;
end
end else if (arburst_int_c == 2'b01 || arburst_int_c == 2'b11) begin
araddr_reg <= S_AXI_ARADDR + num_of_bytes_c;
end
end else if (addr_en_c == 1'b1) begin
araddr_reg <= S_AXI_ARADDR;
num_of_bytes_r <= num_of_bytes_c;
arburst_int_r <= arburst_int_c;
end else if (incr_addr_c == 1'b1) begin
if (arburst_int_r == 2'b10) begin
if(araddr_reg == (wrap_boundary_r-num_of_bytes_r)) begin
araddr_reg <= wrap_base_addr_r;
end else begin
araddr_reg <= araddr_reg + num_of_bytes_r;
end
end else if (arburst_int_r == 2'b01 || arburst_int_r == 2'b11) begin
araddr_reg <= araddr_reg + num_of_bytes_r;
end
end
end
end
assign araddr_out = ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?araddr_reg[C_AXI_ARADDR_WIDTH-1:C_RANGE]:araddr_reg);
////-----------------------------------------------------------------------
//// Counter to generate r_last_int_c from registered ARLEN - AXI FULL FSM
////-----------------------------------------------------------------------
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
arlen_cntr <= 8'h01;
arlen_int_r <= 0;
end else begin
if (addr_en_c == 1'b1 && dec_alen_c == 1'b1 && single_trans_c == 1'b0) begin
arlen_int_r <= (C_AXI_TYPE == 0?0:S_AXI_ARLEN) ;
arlen_cntr <= S_AXI_ARLEN - 1'b1;
end else if (addr_en_c == 1'b1) begin
arlen_int_r <= (C_AXI_TYPE == 0?0:S_AXI_ARLEN) ;
arlen_cntr <= (C_AXI_TYPE == 0?0:S_AXI_ARLEN) ;
end else if (dec_alen_c == 1'b1) begin
arlen_cntr <= arlen_cntr - 1'b1 ;
end
else begin
arlen_cntr <= arlen_cntr;
end
end
end
assign r_last_int_c = (arlen_cntr == 0 && S_AXI_RREADY == 1'b1)?1'b1:1'b0;
////------------------------------------------------------------------------
//// AXI FULL FSM
//// Mux Selection of ARADDR
//// ARADDR is driven out from the read fsm based on the mux_sel_c
//// Based on mux_sel either ARADDR is given out or the latched ARADDR is
//// given out to BRAM
////------------------------------------------------------------------------
assign S_AXI_ARADDR_OUT = (mux_sel_c == 1'b0)?((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_ARADDR[C_AXI_ARADDR_WIDTH-1:C_RANGE]:S_AXI_ARADDR):araddr_out;
////------------------------------------------------------------------------
//// Assign output signals - AXI FULL FSM
////------------------------------------------------------------------------
assign S_AXI_RD_EN = rd_en_c;
generate if (C_HAS_AXI_ID == 1) begin:gaxi_bvalid_id_r
always @(posedge S_ACLK or S_ARESETN) begin
if (S_ARESETN == 1'b1) begin
S_AXI_RID <= 0;
ar_id_r <= 0;
end else begin
if (addr_en_c == 1'b1 && rd_en_c == 1'b1) begin
S_AXI_RID <= S_AXI_ARID;
ar_id_r <= S_AXI_ARID;
end else if (addr_en_c == 1'b1 && rd_en_c == 1'b0) begin
ar_id_r <= S_AXI_ARID;
end else if (rd_en_c == 1'b1) begin
S_AXI_RID <= ar_id_r;
end
end
end
end
endgenerate
endmodule
module blk_mem_axi_regs_fwd_v8_2
#(parameter C_DATA_WIDTH = 8
)(
input ACLK,
input ARESET,
input S_VALID,
output S_READY,
input [C_DATA_WIDTH-1:0] S_PAYLOAD_DATA,
output M_VALID,
input M_READY,
output reg [C_DATA_WIDTH-1:0] M_PAYLOAD_DATA
);
reg [C_DATA_WIDTH-1:0] STORAGE_DATA;
wire S_READY_I;
reg M_VALID_I;
reg [1:0] ARESET_D;
//assign local signal to its output signal
assign S_READY = S_READY_I;
assign M_VALID = M_VALID_I;
always @(posedge ACLK) begin
ARESET_D <= {ARESET_D[0], ARESET};
end
//Save payload data whenever we have a transaction on the slave side
always @(posedge ACLK or ARESET) begin
if (ARESET == 1'b1) begin
STORAGE_DATA <= 0;
end else begin
if(S_VALID == 1'b1 && S_READY_I == 1'b1 ) begin
STORAGE_DATA <= S_PAYLOAD_DATA;
end
end
end
always @(posedge ACLK) begin
M_PAYLOAD_DATA = STORAGE_DATA;
end
//M_Valid set to high when we have a completed transfer on slave side
//Is removed on a M_READY except if we have a new transfer on the slave side
always @(posedge ACLK or ARESET_D) begin
if (ARESET_D != 2'b00) begin
M_VALID_I <= 1'b0;
end else begin
if (S_VALID == 1'b1) begin
//Always set M_VALID_I when slave side is valid
M_VALID_I <= 1'b1;
end else if (M_READY == 1'b1 ) begin
//Clear (or keep) when no slave side is valid but master side is ready
M_VALID_I <= 1'b0;
end
end
end
//Slave Ready is either when Master side drives M_READY or we have space in our storage data
assign S_READY_I = (M_READY || (!M_VALID_I)) && !(|(ARESET_D));
endmodule
//*****************************************************************************
// Output Register Stage module
//
// This module builds the output register stages of the memory. This module is
// instantiated in the main memory module (BLK_MEM_GEN_v8_2) which is
// declared/implemented further down in this file.
//*****************************************************************************
module BLK_MEM_GEN_v8_2_output_stage
#(parameter C_FAMILY = "virtex7",
parameter C_XDEVICEFAMILY = "virtex7",
parameter C_RST_TYPE = "SYNC",
parameter C_HAS_RST = 0,
parameter C_RSTRAM = 0,
parameter C_RST_PRIORITY = "CE",
parameter C_INIT_VAL = "0",
parameter C_HAS_EN = 0,
parameter C_HAS_REGCE = 0,
parameter C_DATA_WIDTH = 32,
parameter C_ADDRB_WIDTH = 10,
parameter C_HAS_MEM_OUTPUT_REGS = 0,
parameter C_USE_SOFTECC = 0,
parameter C_USE_ECC = 0,
parameter NUM_STAGES = 1,
parameter C_EN_ECC_PIPE = 0,
parameter FLOP_DELAY = 100
)
(
input CLK,
input RST,
input EN,
input REGCE,
input [C_DATA_WIDTH-1:0] DIN_I,
output reg [C_DATA_WIDTH-1:0] DOUT,
input SBITERR_IN_I,
input DBITERR_IN_I,
output reg SBITERR,
output reg DBITERR,
input [C_ADDRB_WIDTH-1:0] RDADDRECC_IN_I,
input ECCPIPECE,
output reg [C_ADDRB_WIDTH-1:0] RDADDRECC
);
//******************************
// Port and Generic Definitions
//******************************
//////////////////////////////////////////////////////////////////////////
// Generic Definitions
//////////////////////////////////////////////////////////////////////////
// C_FAMILY,C_XDEVICEFAMILY: Designates architecture targeted. The following
// options are available - "spartan3", "spartan6",
// "virtex4", "virtex5", "virtex6" and "virtex6l".
// C_RST_TYPE : Type of reset - Synchronous or Asynchronous
// C_HAS_RST : Determines the presence of the RST port
// C_RSTRAM : Determines if special reset behavior is used
// C_RST_PRIORITY : Determines the priority between CE and SR
// C_INIT_VAL : Initialization value
// C_HAS_EN : Determines the presence of the EN port
// C_HAS_REGCE : Determines the presence of the REGCE port
// C_DATA_WIDTH : Memory write/read width
// C_ADDRB_WIDTH : Width of the ADDRB input port
// C_HAS_MEM_OUTPUT_REGS : Designates the use of a register at the output
// of the RAM primitive
// C_USE_SOFTECC : Determines if the Soft ECC feature is used or
// not. Only applicable Spartan-6
// C_USE_ECC : Determines if the ECC feature is used or
// not. Only applicable for V5 and V6
// NUM_STAGES : Determines the number of output stages
// FLOP_DELAY : Constant delay for register assignments
//////////////////////////////////////////////////////////////////////////
// Port Definitions
//////////////////////////////////////////////////////////////////////////
// CLK : Clock to synchronize all read and write operations
// RST : Reset input to reset memory outputs to a user-defined
// reset state
// EN : Enable all read and write operations
// REGCE : Register Clock Enable to control each pipeline output
// register stages
// DIN : Data input to the Output stage.
// DOUT : Final Data output
// SBITERR_IN : SBITERR input signal to the Output stage.
// SBITERR : Final SBITERR Output signal.
// DBITERR_IN : DBITERR input signal to the Output stage.
// DBITERR : Final DBITERR Output signal.
// RDADDRECC_IN : RDADDRECC input signal to the Output stage.
// RDADDRECC : Final RDADDRECC Output signal.
//////////////////////////////////////////////////////////////////////////
// Fix for CR-509792
localparam REG_STAGES = (NUM_STAGES < 2) ? 1 : NUM_STAGES-1;
// Declare the pipeline registers
// (includes mem output reg, mux pipeline stages, and mux output reg)
reg [C_DATA_WIDTH*REG_STAGES-1:0] out_regs;
reg [C_ADDRB_WIDTH*REG_STAGES-1:0] rdaddrecc_regs;
reg [REG_STAGES-1:0] sbiterr_regs;
reg [REG_STAGES-1:0] dbiterr_regs;
reg [C_DATA_WIDTH*8-1:0] init_str = C_INIT_VAL;
reg [C_DATA_WIDTH-1:0] init_val ;
//*********************************************
// Wire off optional inputs based on parameters
//*********************************************
wire en_i;
wire regce_i;
wire rst_i;
// Internal signals
reg [C_DATA_WIDTH-1:0] DIN;
reg [C_ADDRB_WIDTH-1:0] RDADDRECC_IN;
reg SBITERR_IN;
reg DBITERR_IN;
// Internal enable for output registers is tied to user EN or '1' depending
// on parameters
assign en_i = (C_HAS_EN==0 || EN);
// Internal register enable for output registers is tied to user REGCE, EN or
// '1' depending on parameters
// For V4 ECC, REGCE is always 1
// Virtex-4 ECC Not Yet Supported
assign regce_i = ((C_HAS_REGCE==1) && REGCE) ||
((C_HAS_REGCE==0) && (C_HAS_EN==0 || EN));
//Internal SRR is tied to user RST or '0' depending on parameters
assign rst_i = (C_HAS_RST==1) && RST;
//****************************************************
// Power on: load up the output registers and latches
//****************************************************
initial begin
if (!($sscanf(init_str, "%h", init_val))) begin
init_val = 0;
end
DOUT = init_val;
RDADDRECC = 0;
SBITERR = 1'b0;
DBITERR = 1'b0;
DIN = {(C_DATA_WIDTH){1'b0}};
RDADDRECC_IN = 0;
SBITERR_IN = 0;
DBITERR_IN = 0;
// This will be one wider than need, but 0 is an error
out_regs = {(REG_STAGES+1){init_val}};
rdaddrecc_regs = 0;
sbiterr_regs = {(REG_STAGES+1){1'b0}};
dbiterr_regs = {(REG_STAGES+1){1'b0}};
end
//***********************************************
// NUM_STAGES = 0 (No output registers. RAM only)
//***********************************************
generate if (NUM_STAGES == 0) begin : zero_stages
always @* begin
DOUT = DIN;
RDADDRECC = RDADDRECC_IN;
SBITERR = SBITERR_IN;
DBITERR = DBITERR_IN;
end
end
endgenerate
generate if (C_EN_ECC_PIPE == 0) begin : no_ecc_pipe_reg
always @* begin
DIN = DIN_I;
SBITERR_IN = SBITERR_IN_I;
DBITERR_IN = DBITERR_IN_I;
RDADDRECC_IN = RDADDRECC_IN_I;
end
end
endgenerate
generate if (C_EN_ECC_PIPE == 1) begin : with_ecc_pipe_reg
always @(posedge CLK) begin
if(ECCPIPECE == 1) begin
DIN <= #FLOP_DELAY DIN_I;
SBITERR_IN <= #FLOP_DELAY SBITERR_IN_I;
DBITERR_IN <= #FLOP_DELAY DBITERR_IN_I;
RDADDRECC_IN <= #FLOP_DELAY RDADDRECC_IN_I;
end
end
end
endgenerate
//***********************************************
// NUM_STAGES = 1
// (Mem Output Reg only or Mux Output Reg only)
//***********************************************
// Possible valid combinations:
// Note: C_HAS_MUX_OUTPUT_REGS_*=0 when (C_RSTRAM_*=1)
// +-----------------------------------------+
// | C_RSTRAM_* | Reset Behavior |
// +----------------+------------------------+
// | 0 | Normal Behavior |
// +----------------+------------------------+
// | 1 | Special Behavior |
// +----------------+------------------------+
//
// Normal = REGCE gates reset, as in the case of all families except S3ADSP.
// Special = EN gates reset, as in the case of S3ADSP.
generate if (NUM_STAGES == 1 &&
(C_RSTRAM == 0 || (C_RSTRAM == 1 && (C_XDEVICEFAMILY != "spartan3adsp" && C_XDEVICEFAMILY != "aspartan3adsp" )) ||
C_HAS_MEM_OUTPUT_REGS == 0 || C_HAS_RST == 0))
begin : one_stages_norm
always @(posedge CLK) begin
if (C_RST_PRIORITY == "CE") begin //REGCE has priority
if (regce_i && rst_i) begin
DOUT <= #FLOP_DELAY init_val;
RDADDRECC <= #FLOP_DELAY 0;
SBITERR <= #FLOP_DELAY 1'b0;
DBITERR <= #FLOP_DELAY 1'b0;
end else if (regce_i) begin
DOUT <= #FLOP_DELAY DIN;
RDADDRECC <= #FLOP_DELAY RDADDRECC_IN;
SBITERR <= #FLOP_DELAY SBITERR_IN;
DBITERR <= #FLOP_DELAY DBITERR_IN;
end //Output signal assignments
end else begin //RST has priority
if (rst_i) begin
DOUT <= #FLOP_DELAY init_val;
RDADDRECC <= #FLOP_DELAY RDADDRECC_IN;
SBITERR <= #FLOP_DELAY 1'b0;
DBITERR <= #FLOP_DELAY 1'b0;
end else if (regce_i) begin
DOUT <= #FLOP_DELAY DIN;
RDADDRECC <= #FLOP_DELAY RDADDRECC_IN;
SBITERR <= #FLOP_DELAY SBITERR_IN;
DBITERR <= #FLOP_DELAY DBITERR_IN;
end //Output signal assignments
end //end Priority conditions
end //end RST Type conditions
end //end one_stages_norm generate statement
endgenerate
// Special Reset Behavior for S3ADSP
generate if (NUM_STAGES == 1 && C_RSTRAM == 1 && (C_XDEVICEFAMILY =="spartan3adsp" || C_XDEVICEFAMILY =="aspartan3adsp"))
begin : one_stage_splbhv
always @(posedge CLK) begin
if (en_i && rst_i) begin
DOUT <= #FLOP_DELAY init_val;
end else if (regce_i && !rst_i) begin
DOUT <= #FLOP_DELAY DIN;
end //Output signal assignments
end //end CLK
end //end one_stage_splbhv generate statement
endgenerate
//************************************************************
// NUM_STAGES > 1
// Mem Output Reg + Mux Output Reg
// or
// Mem Output Reg + Mux Pipeline Stages (>0) + Mux Output Reg
// or
// Mux Pipeline Stages (>0) + Mux Output Reg
//*************************************************************
generate if (NUM_STAGES > 1) begin : multi_stage
//Asynchronous Reset
always @(posedge CLK) begin
if (C_RST_PRIORITY == "CE") begin //REGCE has priority
if (regce_i && rst_i) begin
DOUT <= #FLOP_DELAY init_val;
RDADDRECC <= #FLOP_DELAY 0;
SBITERR <= #FLOP_DELAY 1'b0;
DBITERR <= #FLOP_DELAY 1'b0;
end else if (regce_i) begin
DOUT <= #FLOP_DELAY
out_regs[C_DATA_WIDTH*(NUM_STAGES-2)+:C_DATA_WIDTH];
RDADDRECC <= #FLOP_DELAY rdaddrecc_regs[C_ADDRB_WIDTH*(NUM_STAGES-2)+:C_ADDRB_WIDTH];
SBITERR <= #FLOP_DELAY sbiterr_regs[NUM_STAGES-2];
DBITERR <= #FLOP_DELAY dbiterr_regs[NUM_STAGES-2];
end //Output signal assignments
end else begin //RST has priority
if (rst_i) begin
DOUT <= #FLOP_DELAY init_val;
RDADDRECC <= #FLOP_DELAY 0;
SBITERR <= #FLOP_DELAY 1'b0;
DBITERR <= #FLOP_DELAY 1'b0;
end else if (regce_i) begin
DOUT <= #FLOP_DELAY
out_regs[C_DATA_WIDTH*(NUM_STAGES-2)+:C_DATA_WIDTH];
RDADDRECC <= #FLOP_DELAY rdaddrecc_regs[C_ADDRB_WIDTH*(NUM_STAGES-2)+:C_ADDRB_WIDTH];
SBITERR <= #FLOP_DELAY sbiterr_regs[NUM_STAGES-2];
DBITERR <= #FLOP_DELAY dbiterr_regs[NUM_STAGES-2];
end //Output signal assignments
end //end Priority conditions
// Shift the data through the output stages
if (en_i) begin
out_regs <= #FLOP_DELAY (out_regs << C_DATA_WIDTH) | DIN;
rdaddrecc_regs <= #FLOP_DELAY (rdaddrecc_regs << C_ADDRB_WIDTH) | RDADDRECC_IN;
sbiterr_regs <= #FLOP_DELAY (sbiterr_regs << 1) | SBITERR_IN;
dbiterr_regs <= #FLOP_DELAY (dbiterr_regs << 1) | DBITERR_IN;
end
end //end CLK
end //end multi_stage generate statement
endgenerate
endmodule
module BLK_MEM_GEN_v8_2_softecc_output_reg_stage
#(parameter C_DATA_WIDTH = 32,
parameter C_ADDRB_WIDTH = 10,
parameter C_HAS_SOFTECC_OUTPUT_REGS_B= 0,
parameter C_USE_SOFTECC = 0,
parameter FLOP_DELAY = 100
)
(
input CLK,
input [C_DATA_WIDTH-1:0] DIN,
output reg [C_DATA_WIDTH-1:0] DOUT,
input SBITERR_IN,
input DBITERR_IN,
output reg SBITERR,
output reg DBITERR,
input [C_ADDRB_WIDTH-1:0] RDADDRECC_IN,
output reg [C_ADDRB_WIDTH-1:0] RDADDRECC
);
//******************************
// Port and Generic Definitions
//******************************
//////////////////////////////////////////////////////////////////////////
// Generic Definitions
//////////////////////////////////////////////////////////////////////////
// C_DATA_WIDTH : Memory write/read width
// C_ADDRB_WIDTH : Width of the ADDRB input port
// C_HAS_SOFTECC_OUTPUT_REGS_B : Designates the use of a register at the output
// of the RAM primitive
// C_USE_SOFTECC : Determines if the Soft ECC feature is used or
// not. Only applicable Spartan-6
// FLOP_DELAY : Constant delay for register assignments
//////////////////////////////////////////////////////////////////////////
// Port Definitions
//////////////////////////////////////////////////////////////////////////
// CLK : Clock to synchronize all read and write operations
// DIN : Data input to the Output stage.
// DOUT : Final Data output
// SBITERR_IN : SBITERR input signal to the Output stage.
// SBITERR : Final SBITERR Output signal.
// DBITERR_IN : DBITERR input signal to the Output stage.
// DBITERR : Final DBITERR Output signal.
// RDADDRECC_IN : RDADDRECC input signal to the Output stage.
// RDADDRECC : Final RDADDRECC Output signal.
//////////////////////////////////////////////////////////////////////////
reg [C_DATA_WIDTH-1:0] dout_i = 0;
reg sbiterr_i = 0;
reg dbiterr_i = 0;
reg [C_ADDRB_WIDTH-1:0] rdaddrecc_i = 0;
//***********************************************
// NO OUTPUT REGISTERS.
//***********************************************
generate if (C_HAS_SOFTECC_OUTPUT_REGS_B==0) begin : no_output_stage
always @* begin
DOUT = DIN;
RDADDRECC = RDADDRECC_IN;
SBITERR = SBITERR_IN;
DBITERR = DBITERR_IN;
end
end
endgenerate
//***********************************************
// WITH OUTPUT REGISTERS.
//***********************************************
generate if (C_HAS_SOFTECC_OUTPUT_REGS_B==1) begin : has_output_stage
always @(posedge CLK) begin
dout_i <= #FLOP_DELAY DIN;
rdaddrecc_i <= #FLOP_DELAY RDADDRECC_IN;
sbiterr_i <= #FLOP_DELAY SBITERR_IN;
dbiterr_i <= #FLOP_DELAY DBITERR_IN;
end
always @* begin
DOUT = dout_i;
RDADDRECC = rdaddrecc_i;
SBITERR = sbiterr_i;
DBITERR = dbiterr_i;
end //end always
end //end in_or_out_stage generate statement
endgenerate
endmodule
//*****************************************************************************
// Main Memory module
//
// This module is the top-level behavioral model and this implements the RAM
//*****************************************************************************
module BLK_MEM_GEN_v8_2_mem_module
#(parameter C_CORENAME = "blk_mem_gen_v8_2",
parameter C_FAMILY = "virtex7",
parameter C_XDEVICEFAMILY = "virtex7",
parameter C_MEM_TYPE = 2,
parameter C_BYTE_SIZE = 9,
parameter C_USE_BRAM_BLOCK = 0,
parameter C_ALGORITHM = 1,
parameter C_PRIM_TYPE = 3,
parameter C_LOAD_INIT_FILE = 0,
parameter C_INIT_FILE_NAME = "",
parameter C_INIT_FILE = "",
parameter C_USE_DEFAULT_DATA = 0,
parameter C_DEFAULT_DATA = "0",
parameter C_RST_TYPE = "SYNC",
parameter C_HAS_RSTA = 0,
parameter C_RST_PRIORITY_A = "CE",
parameter C_RSTRAM_A = 0,
parameter C_INITA_VAL = "0",
parameter C_HAS_ENA = 1,
parameter C_HAS_REGCEA = 0,
parameter C_USE_BYTE_WEA = 0,
parameter C_WEA_WIDTH = 1,
parameter C_WRITE_MODE_A = "WRITE_FIRST",
parameter C_WRITE_WIDTH_A = 32,
parameter C_READ_WIDTH_A = 32,
parameter C_WRITE_DEPTH_A = 64,
parameter C_READ_DEPTH_A = 64,
parameter C_ADDRA_WIDTH = 5,
parameter C_HAS_RSTB = 0,
parameter C_RST_PRIORITY_B = "CE",
parameter C_RSTRAM_B = 0,
parameter C_INITB_VAL = "",
parameter C_HAS_ENB = 1,
parameter C_HAS_REGCEB = 0,
parameter C_USE_BYTE_WEB = 0,
parameter C_WEB_WIDTH = 1,
parameter C_WRITE_MODE_B = "WRITE_FIRST",
parameter C_WRITE_WIDTH_B = 32,
parameter C_READ_WIDTH_B = 32,
parameter C_WRITE_DEPTH_B = 64,
parameter C_READ_DEPTH_B = 64,
parameter C_ADDRB_WIDTH = 5,
parameter C_HAS_MEM_OUTPUT_REGS_A = 0,
parameter C_HAS_MEM_OUTPUT_REGS_B = 0,
parameter C_HAS_MUX_OUTPUT_REGS_A = 0,
parameter C_HAS_MUX_OUTPUT_REGS_B = 0,
parameter C_HAS_SOFTECC_INPUT_REGS_A = 0,
parameter C_HAS_SOFTECC_OUTPUT_REGS_B= 0,
parameter C_MUX_PIPELINE_STAGES = 0,
parameter C_USE_SOFTECC = 0,
parameter C_USE_ECC = 0,
parameter C_HAS_INJECTERR = 0,
parameter C_SIM_COLLISION_CHECK = "NONE",
parameter C_COMMON_CLK = 1,
parameter FLOP_DELAY = 100,
parameter C_DISABLE_WARN_BHV_COLL = 0,
parameter C_EN_ECC_PIPE = 0,
parameter C_DISABLE_WARN_BHV_RANGE = 0
)
(input CLKA,
input RSTA,
input ENA,
input REGCEA,
input [C_WEA_WIDTH-1:0] WEA,
input [C_ADDRA_WIDTH-1:0] ADDRA,
input [C_WRITE_WIDTH_A-1:0] DINA,
output [C_READ_WIDTH_A-1:0] DOUTA,
input CLKB,
input RSTB,
input ENB,
input REGCEB,
input [C_WEB_WIDTH-1:0] WEB,
input [C_ADDRB_WIDTH-1:0] ADDRB,
input [C_WRITE_WIDTH_B-1:0] DINB,
output [C_READ_WIDTH_B-1:0] DOUTB,
input INJECTSBITERR,
input INJECTDBITERR,
input ECCPIPECE,
input SLEEP,
output SBITERR,
output DBITERR,
output [C_ADDRB_WIDTH-1:0] RDADDRECC
);
//******************************
// Port and Generic Definitions
//******************************
//////////////////////////////////////////////////////////////////////////
// Generic Definitions
//////////////////////////////////////////////////////////////////////////
// C_CORENAME : Instance name of the Block Memory Generator core
// C_FAMILY,C_XDEVICEFAMILY: Designates architecture targeted. The following
// options are available - "spartan3", "spartan6",
// "virtex4", "virtex5", "virtex6" and "virtex6l".
// C_MEM_TYPE : Designates memory type.
// It can be
// 0 - Single Port Memory
// 1 - Simple Dual Port Memory
// 2 - True Dual Port Memory
// 3 - Single Port Read Only Memory
// 4 - Dual Port Read Only Memory
// C_BYTE_SIZE : Size of a byte (8 or 9 bits)
// C_ALGORITHM : Designates the algorithm method used
// for constructing the memory.
// It can be Fixed_Primitives, Minimum_Area or
// Low_Power
// C_PRIM_TYPE : Designates the user selected primitive used to
// construct the memory.
//
// C_LOAD_INIT_FILE : Designates the use of an initialization file to
// initialize memory contents.
// C_INIT_FILE_NAME : Memory initialization file name.
// C_USE_DEFAULT_DATA : Designates whether to fill remaining
// initialization space with default data
// C_DEFAULT_DATA : Default value of all memory locations
// not initialized by the memory
// initialization file.
// C_RST_TYPE : Type of reset - Synchronous or Asynchronous
// C_HAS_RSTA : Determines the presence of the RSTA port
// C_RST_PRIORITY_A : Determines the priority between CE and SR for
// Port A.
// C_RSTRAM_A : Determines if special reset behavior is used for
// Port A
// C_INITA_VAL : The initialization value for Port A
// C_HAS_ENA : Determines the presence of the ENA port
// C_HAS_REGCEA : Determines the presence of the REGCEA port
// C_USE_BYTE_WEA : Determines if the Byte Write is used or not.
// C_WEA_WIDTH : The width of the WEA port
// C_WRITE_MODE_A : Configurable write mode for Port A. It can be
// WRITE_FIRST, READ_FIRST or NO_CHANGE.
// C_WRITE_WIDTH_A : Memory write width for Port A.
// C_READ_WIDTH_A : Memory read width for Port A.
// C_WRITE_DEPTH_A : Memory write depth for Port A.
// C_READ_DEPTH_A : Memory read depth for Port A.
// C_ADDRA_WIDTH : Width of the ADDRA input port
// C_HAS_RSTB : Determines the presence of the RSTB port
// C_RST_PRIORITY_B : Determines the priority between CE and SR for
// Port B.
// C_RSTRAM_B : Determines if special reset behavior is used for
// Port B
// C_INITB_VAL : The initialization value for Port B
// C_HAS_ENB : Determines the presence of the ENB port
// C_HAS_REGCEB : Determines the presence of the REGCEB port
// C_USE_BYTE_WEB : Determines if the Byte Write is used or not.
// C_WEB_WIDTH : The width of the WEB port
// C_WRITE_MODE_B : Configurable write mode for Port B. It can be
// WRITE_FIRST, READ_FIRST or NO_CHANGE.
// C_WRITE_WIDTH_B : Memory write width for Port B.
// C_READ_WIDTH_B : Memory read width for Port B.
// C_WRITE_DEPTH_B : Memory write depth for Port B.
// C_READ_DEPTH_B : Memory read depth for Port B.
// C_ADDRB_WIDTH : Width of the ADDRB input port
// C_HAS_MEM_OUTPUT_REGS_A : Designates the use of a register at the output
// of the RAM primitive for Port A.
// C_HAS_MEM_OUTPUT_REGS_B : Designates the use of a register at the output
// of the RAM primitive for Port B.
// C_HAS_MUX_OUTPUT_REGS_A : Designates the use of a register at the output
// of the MUX for Port A.
// C_HAS_MUX_OUTPUT_REGS_B : Designates the use of a register at the output
// of the MUX for Port B.
// C_MUX_PIPELINE_STAGES : Designates the number of pipeline stages in
// between the muxes.
// C_USE_SOFTECC : Determines if the Soft ECC feature is used or
// not. Only applicable Spartan-6
// C_USE_ECC : Determines if the ECC feature is used or
// not. Only applicable for V5 and V6
// C_HAS_INJECTERR : Determines if the error injection pins
// are present or not. If the ECC feature
// is not used, this value is defaulted to
// 0, else the following are the allowed
// values:
// 0 : No INJECTSBITERR or INJECTDBITERR pins
// 1 : Only INJECTSBITERR pin exists
// 2 : Only INJECTDBITERR pin exists
// 3 : Both INJECTSBITERR and INJECTDBITERR pins exist
// C_SIM_COLLISION_CHECK : Controls the disabling of Unisim model collision
// warnings. It can be "ALL", "NONE",
// "Warnings_Only" or "Generate_X_Only".
// C_COMMON_CLK : Determins if the core has a single CLK input.
// C_DISABLE_WARN_BHV_COLL : Controls the Behavioral Model Collision warnings
// C_DISABLE_WARN_BHV_RANGE: Controls the Behavioral Model Out of Range
// warnings
//////////////////////////////////////////////////////////////////////////
// Port Definitions
//////////////////////////////////////////////////////////////////////////
// CLKA : Clock to synchronize all read and write operations of Port A.
// RSTA : Reset input to reset memory outputs to a user-defined
// reset state for Port A.
// ENA : Enable all read and write operations of Port A.
// REGCEA : Register Clock Enable to control each pipeline output
// register stages for Port A.
// WEA : Write Enable to enable all write operations of Port A.
// ADDRA : Address of Port A.
// DINA : Data input of Port A.
// DOUTA : Data output of Port A.
// CLKB : Clock to synchronize all read and write operations of Port B.
// RSTB : Reset input to reset memory outputs to a user-defined
// reset state for Port B.
// ENB : Enable all read and write operations of Port B.
// REGCEB : Register Clock Enable to control each pipeline output
// register stages for Port B.
// WEB : Write Enable to enable all write operations of Port B.
// ADDRB : Address of Port B.
// DINB : Data input of Port B.
// DOUTB : Data output of Port B.
// INJECTSBITERR : Single Bit ECC Error Injection Pin.
// INJECTDBITERR : Double Bit ECC Error Injection Pin.
// SBITERR : Output signal indicating that a Single Bit ECC Error has been
// detected and corrected.
// DBITERR : Output signal indicating that a Double Bit ECC Error has been
// detected.
// RDADDRECC : Read Address Output signal indicating address at which an
// ECC error has occurred.
//////////////////////////////////////////////////////////////////////////
// Note: C_CORENAME parameter is hard-coded to "blk_mem_gen_v8_2" and it is
// only used by this module to print warning messages. It is neither passed
// down from blk_mem_gen_v8_2_xst.v nor present in the instantiation template
// coregen generates
//***************************************************************************
// constants for the core behavior
//***************************************************************************
// file handles for logging
//--------------------------------------------------
localparam ADDRFILE = 32'h8000_0001; //stdout for addr out of range
localparam COLLFILE = 32'h8000_0001; //stdout for coll detection
localparam ERRFILE = 32'h8000_0001; //stdout for file I/O errors
// other constants
//--------------------------------------------------
localparam COLL_DELAY = 100; // 100 ps
// locally derived parameters to determine memory shape
//-----------------------------------------------------
localparam CHKBIT_WIDTH = (C_WRITE_WIDTH_A>57 ? 8 : (C_WRITE_WIDTH_A>26 ? 7 : (C_WRITE_WIDTH_A>11 ? 6 : (C_WRITE_WIDTH_A>4 ? 5 : (C_WRITE_WIDTH_A<5 ? 4 :0)))));
localparam MIN_WIDTH_A = (C_WRITE_WIDTH_A < C_READ_WIDTH_A) ?
C_WRITE_WIDTH_A : C_READ_WIDTH_A;
localparam MIN_WIDTH_B = (C_WRITE_WIDTH_B < C_READ_WIDTH_B) ?
C_WRITE_WIDTH_B : C_READ_WIDTH_B;
localparam MIN_WIDTH = (MIN_WIDTH_A < MIN_WIDTH_B) ?
MIN_WIDTH_A : MIN_WIDTH_B;
localparam MAX_DEPTH_A = (C_WRITE_DEPTH_A > C_READ_DEPTH_A) ?
C_WRITE_DEPTH_A : C_READ_DEPTH_A;
localparam MAX_DEPTH_B = (C_WRITE_DEPTH_B > C_READ_DEPTH_B) ?
C_WRITE_DEPTH_B : C_READ_DEPTH_B;
localparam MAX_DEPTH = (MAX_DEPTH_A > MAX_DEPTH_B) ?
MAX_DEPTH_A : MAX_DEPTH_B;
// locally derived parameters to assist memory access
//----------------------------------------------------
// Calculate the width ratios of each port with respect to the narrowest
// port
localparam WRITE_WIDTH_RATIO_A = C_WRITE_WIDTH_A/MIN_WIDTH;
localparam READ_WIDTH_RATIO_A = C_READ_WIDTH_A/MIN_WIDTH;
localparam WRITE_WIDTH_RATIO_B = C_WRITE_WIDTH_B/MIN_WIDTH;
localparam READ_WIDTH_RATIO_B = C_READ_WIDTH_B/MIN_WIDTH;
// To modify the LSBs of the 'wider' data to the actual
// address value
//----------------------------------------------------
localparam WRITE_ADDR_A_DIV = C_WRITE_WIDTH_A/MIN_WIDTH_A;
localparam READ_ADDR_A_DIV = C_READ_WIDTH_A/MIN_WIDTH_A;
localparam WRITE_ADDR_B_DIV = C_WRITE_WIDTH_B/MIN_WIDTH_B;
localparam READ_ADDR_B_DIV = C_READ_WIDTH_B/MIN_WIDTH_B;
// If byte writes aren't being used, make sure BYTE_SIZE is not
// wider than the memory elements to avoid compilation warnings
localparam BYTE_SIZE = (C_BYTE_SIZE < MIN_WIDTH) ? C_BYTE_SIZE : MIN_WIDTH;
// The memory
reg [MIN_WIDTH-1:0] memory [0:MAX_DEPTH-1];
reg [MIN_WIDTH-1:0] temp_mem_array [0:MAX_DEPTH-1];
reg [C_WRITE_WIDTH_A+CHKBIT_WIDTH-1:0] doublebit_error = 3;
// ECC error arrays
reg sbiterr_arr [0:MAX_DEPTH-1];
reg dbiterr_arr [0:MAX_DEPTH-1];
reg softecc_sbiterr_arr [0:MAX_DEPTH-1];
reg softecc_dbiterr_arr [0:MAX_DEPTH-1];
// Memory output 'latches'
reg [C_READ_WIDTH_A-1:0] memory_out_a;
reg [C_READ_WIDTH_B-1:0] memory_out_b;
// ECC error inputs and outputs from output_stage module:
reg sbiterr_in;
wire sbiterr_sdp;
reg dbiterr_in;
wire dbiterr_sdp;
wire [C_READ_WIDTH_B-1:0] dout_i;
wire dbiterr_i;
wire sbiterr_i;
wire [C_ADDRB_WIDTH-1:0] rdaddrecc_i;
reg [C_ADDRB_WIDTH-1:0] rdaddrecc_in;
wire [C_ADDRB_WIDTH-1:0] rdaddrecc_sdp;
// Reset values
reg [C_READ_WIDTH_A-1:0] inita_val;
reg [C_READ_WIDTH_B-1:0] initb_val;
// Collision detect
reg is_collision;
reg is_collision_a, is_collision_delay_a;
reg is_collision_b, is_collision_delay_b;
// Temporary variables for initialization
//---------------------------------------
integer status;
integer initfile;
integer meminitfile;
// data input buffer
reg [C_WRITE_WIDTH_A-1:0] mif_data;
reg [C_WRITE_WIDTH_A-1:0] mem_data;
// string values in hex
reg [C_READ_WIDTH_A*8-1:0] inita_str = C_INITA_VAL;
reg [C_READ_WIDTH_B*8-1:0] initb_str = C_INITB_VAL;
reg [C_WRITE_WIDTH_A*8-1:0] default_data_str = C_DEFAULT_DATA;
// initialization filename
reg [1023*8-1:0] init_file_str = C_INIT_FILE_NAME;
reg [1023*8-1:0] mem_init_file_str = C_INIT_FILE;
//Constants used to calculate the effective address widths for each of the
//four ports.
integer cnt = 1;
integer write_addr_a_width, read_addr_a_width;
integer write_addr_b_width, read_addr_b_width;
localparam C_FAMILY_LOCALPARAM = (C_FAMILY=="virtexu"?"virtex7":(C_FAMILY=="kintexu" ? "virtex7":(C_FAMILY=="virtex7" ? "virtex7" : (C_FAMILY=="virtex7l" ? "virtex7" : (C_FAMILY=="qvirtex7" ? "virtex7" : (C_FAMILY=="qvirtex7l" ? "virtex7" : (C_FAMILY=="kintex7" ? "virtex7" : (C_FAMILY=="kintex7l" ? "virtex7" : (C_FAMILY=="qkintex7" ? "virtex7" : (C_FAMILY=="qkintex7l" ? "virtex7" : (C_FAMILY=="artix7" ? "virtex7" : (C_FAMILY=="artix7l" ? "virtex7" : (C_FAMILY=="qartix7" ? "virtex7" : (C_FAMILY=="qartix7l" ? "virtex7" : (C_FAMILY=="aartix7" ? "virtex7" : (C_FAMILY=="zynq" ? "virtex7" : (C_FAMILY=="azynq" ? "virtex7" : (C_FAMILY=="qzynq" ? "virtex7" : C_FAMILY))))))))))))))))));
// Internal configuration parameters
//---------------------------------------------
localparam SINGLE_PORT = (C_MEM_TYPE==0 || C_MEM_TYPE==3);
localparam IS_ROM = (C_MEM_TYPE==3 || C_MEM_TYPE==4);
localparam HAS_A_WRITE = (!IS_ROM);
localparam HAS_B_WRITE = (C_MEM_TYPE==2);
localparam HAS_A_READ = (C_MEM_TYPE!=1);
localparam HAS_B_READ = (!SINGLE_PORT);
localparam HAS_B_PORT = (HAS_B_READ || HAS_B_WRITE);
// Calculate the mux pipeline register stages for Port A and Port B
//------------------------------------------------------------------
localparam MUX_PIPELINE_STAGES_A = (C_HAS_MUX_OUTPUT_REGS_A) ?
C_MUX_PIPELINE_STAGES : 0;
localparam MUX_PIPELINE_STAGES_B = (C_HAS_MUX_OUTPUT_REGS_B) ?
C_MUX_PIPELINE_STAGES : 0;
// Calculate total number of register stages in the core
// -----------------------------------------------------
localparam NUM_OUTPUT_STAGES_A = (C_HAS_MEM_OUTPUT_REGS_A+MUX_PIPELINE_STAGES_A+C_HAS_MUX_OUTPUT_REGS_A);
localparam NUM_OUTPUT_STAGES_B = (C_HAS_MEM_OUTPUT_REGS_B+MUX_PIPELINE_STAGES_B+C_HAS_MUX_OUTPUT_REGS_B);
wire ena_i;
wire enb_i;
wire reseta_i;
wire resetb_i;
wire [C_WEA_WIDTH-1:0] wea_i;
wire [C_WEB_WIDTH-1:0] web_i;
wire rea_i;
wire reb_i;
wire rsta_outp_stage;
wire rstb_outp_stage;
// ECC SBITERR/DBITERR Outputs
// The ECC Behavior is modeled by the behavioral models only for Virtex-6.
// For Virtex-5, these outputs will be tied to 0.
assign SBITERR = ((C_MEM_TYPE == 1 && C_USE_ECC == 1) || C_USE_SOFTECC == 1)?sbiterr_sdp:0;
assign DBITERR = ((C_MEM_TYPE == 1 && C_USE_ECC == 1) || C_USE_SOFTECC == 1)?dbiterr_sdp:0;
assign RDADDRECC = (((C_FAMILY_LOCALPARAM == "virtex7") && C_MEM_TYPE == 1 && C_USE_ECC == 1) || C_USE_SOFTECC == 1)?rdaddrecc_sdp:0;
// This effectively wires off optional inputs
assign ena_i = (C_HAS_ENA==0) || ENA;
assign enb_i = ((C_HAS_ENB==0) || ENB) && HAS_B_PORT;
assign wea_i = (HAS_A_WRITE && ena_i) ? WEA : 'b0;
assign web_i = (HAS_B_WRITE && enb_i) ? WEB : 'b0;
assign rea_i = (HAS_A_READ) ? ena_i : 'b0;
assign reb_i = (HAS_B_READ) ? enb_i : 'b0;
// These signals reset the memory latches
assign reseta_i =
((C_HAS_RSTA==1 && RSTA && NUM_OUTPUT_STAGES_A==0) ||
(C_HAS_RSTA==1 && RSTA && C_RSTRAM_A==1));
assign resetb_i =
((C_HAS_RSTB==1 && RSTB && NUM_OUTPUT_STAGES_B==0) ||
(C_HAS_RSTB==1 && RSTB && C_RSTRAM_B==1));
// Tasks to access the memory
//---------------------------
//**************
// write_a
//**************
task write_a
(input reg [C_ADDRA_WIDTH-1:0] addr,
input reg [C_WEA_WIDTH-1:0] byte_en,
input reg [C_WRITE_WIDTH_A-1:0] data,
input inj_sbiterr,
input inj_dbiterr);
reg [C_WRITE_WIDTH_A-1:0] current_contents;
reg [C_ADDRA_WIDTH-1:0] address;
integer i;
begin
// Shift the address by the ratio
address = (addr/WRITE_ADDR_A_DIV);
if (address >= C_WRITE_DEPTH_A) begin
if (!C_DISABLE_WARN_BHV_RANGE) begin
$fdisplay(ADDRFILE,
"%0s WARNING: Address %0h is outside range for A Write",
C_CORENAME, addr);
end
// valid address
end else begin
// Combine w/ byte writes
if (C_USE_BYTE_WEA) begin
// Get the current memory contents
if (WRITE_WIDTH_RATIO_A == 1) begin
// Workaround for IUS 5.5 part-select issue
current_contents = memory[address];
end else begin
for (i = 0; i < WRITE_WIDTH_RATIO_A; i = i + 1) begin
current_contents[MIN_WIDTH*i+:MIN_WIDTH]
= memory[address*WRITE_WIDTH_RATIO_A + i];
end
end
// Apply incoming bytes
if (C_WEA_WIDTH == 1) begin
// Workaround for IUS 5.5 part-select issue
if (byte_en[0]) begin
current_contents = data;
end
end else begin
for (i = 0; i < C_WEA_WIDTH; i = i + 1) begin
if (byte_en[i]) begin
current_contents[BYTE_SIZE*i+:BYTE_SIZE]
= data[BYTE_SIZE*i+:BYTE_SIZE];
end
end
end
// No byte-writes, overwrite the whole word
end else begin
current_contents = data;
end
// Insert double bit errors:
if (C_USE_ECC == 1) begin
if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin
current_contents[0] = !(current_contents[0]);
current_contents[1] = !(current_contents[1]);
end
end
// Insert softecc double bit errors:
if (C_USE_SOFTECC == 1) begin
if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin
doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-1:2] = doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-3:0];
doublebit_error[0] = doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-1];
doublebit_error[1] = doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-2];
current_contents = current_contents ^ doublebit_error[C_WRITE_WIDTH_A-1:0];
end
end
// Write data to memory
if (WRITE_WIDTH_RATIO_A == 1) begin
// Workaround for IUS 5.5 part-select issue
memory[address*WRITE_WIDTH_RATIO_A] = current_contents;
end else begin
for (i = 0; i < WRITE_WIDTH_RATIO_A; i = i + 1) begin
memory[address*WRITE_WIDTH_RATIO_A + i]
= current_contents[MIN_WIDTH*i+:MIN_WIDTH];
end
end
// Store the address at which error is injected:
if ((C_FAMILY_LOCALPARAM == "virtex7") && C_USE_ECC == 1) begin
if ((C_HAS_INJECTERR == 1 && inj_sbiterr == 1'b1) ||
(C_HAS_INJECTERR == 3 && inj_sbiterr == 1'b1 && inj_dbiterr != 1'b1))
begin
sbiterr_arr[addr] = 1;
end else begin
sbiterr_arr[addr] = 0;
end
if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin
dbiterr_arr[addr] = 1;
end else begin
dbiterr_arr[addr] = 0;
end
end
// Store the address at which softecc error is injected:
if (C_USE_SOFTECC == 1) begin
if ((C_HAS_INJECTERR == 1 && inj_sbiterr == 1'b1) ||
(C_HAS_INJECTERR == 3 && inj_sbiterr == 1'b1 && inj_dbiterr != 1'b1))
begin
softecc_sbiterr_arr[addr] = 1;
end else begin
softecc_sbiterr_arr[addr] = 0;
end
if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin
softecc_dbiterr_arr[addr] = 1;
end else begin
softecc_dbiterr_arr[addr] = 0;
end
end
end
end
endtask
//**************
// write_b
//**************
task write_b
(input reg [C_ADDRB_WIDTH-1:0] addr,
input reg [C_WEB_WIDTH-1:0] byte_en,
input reg [C_WRITE_WIDTH_B-1:0] data);
reg [C_WRITE_WIDTH_B-1:0] current_contents;
reg [C_ADDRB_WIDTH-1:0] address;
integer i;
begin
// Shift the address by the ratio
address = (addr/WRITE_ADDR_B_DIV);
if (address >= C_WRITE_DEPTH_B) begin
if (!C_DISABLE_WARN_BHV_RANGE) begin
$fdisplay(ADDRFILE,
"%0s WARNING: Address %0h is outside range for B Write",
C_CORENAME, addr);
end
// valid address
end else begin
// Combine w/ byte writes
if (C_USE_BYTE_WEB) begin
// Get the current memory contents
if (WRITE_WIDTH_RATIO_B == 1) begin
// Workaround for IUS 5.5 part-select issue
current_contents = memory[address];
end else begin
for (i = 0; i < WRITE_WIDTH_RATIO_B; i = i + 1) begin
current_contents[MIN_WIDTH*i+:MIN_WIDTH]
= memory[address*WRITE_WIDTH_RATIO_B + i];
end
end
// Apply incoming bytes
if (C_WEB_WIDTH == 1) begin
// Workaround for IUS 5.5 part-select issue
if (byte_en[0]) begin
current_contents = data;
end
end else begin
for (i = 0; i < C_WEB_WIDTH; i = i + 1) begin
if (byte_en[i]) begin
current_contents[BYTE_SIZE*i+:BYTE_SIZE]
= data[BYTE_SIZE*i+:BYTE_SIZE];
end
end
end
// No byte-writes, overwrite the whole word
end else begin
current_contents = data;
end
// Write data to memory
if (WRITE_WIDTH_RATIO_B == 1) begin
// Workaround for IUS 5.5 part-select issue
memory[address*WRITE_WIDTH_RATIO_B] = current_contents;
end else begin
for (i = 0; i < WRITE_WIDTH_RATIO_B; i = i + 1) begin
memory[address*WRITE_WIDTH_RATIO_B + i]
= current_contents[MIN_WIDTH*i+:MIN_WIDTH];
end
end
end
end
endtask
//**************
// read_a
//**************
task read_a
(input reg [C_ADDRA_WIDTH-1:0] addr,
input reg reset);
reg [C_ADDRA_WIDTH-1:0] address;
integer i;
begin
if (reset) begin
memory_out_a <= #FLOP_DELAY inita_val;
end else begin
// Shift the address by the ratio
address = (addr/READ_ADDR_A_DIV);
if (address >= C_READ_DEPTH_A) begin
if (!C_DISABLE_WARN_BHV_RANGE) begin
$fdisplay(ADDRFILE,
"%0s WARNING: Address %0h is outside range for A Read",
C_CORENAME, addr);
end
memory_out_a <= #FLOP_DELAY 'bX;
// valid address
end else begin
if (READ_WIDTH_RATIO_A==1) begin
memory_out_a <= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_A];
end else begin
// Increment through the 'partial' words in the memory
for (i = 0; i < READ_WIDTH_RATIO_A; i = i + 1) begin
memory_out_a[MIN_WIDTH*i+:MIN_WIDTH]
<= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_A + i];
end
end //end READ_WIDTH_RATIO_A==1 loop
end //end valid address loop
end //end reset-data assignment loops
end
endtask
//**************
// read_b
//**************
task read_b
(input reg [C_ADDRB_WIDTH-1:0] addr,
input reg reset);
reg [C_ADDRB_WIDTH-1:0] address;
integer i;
begin
if (reset) begin
memory_out_b <= #FLOP_DELAY initb_val;
sbiterr_in <= #FLOP_DELAY 1'b0;
dbiterr_in <= #FLOP_DELAY 1'b0;
rdaddrecc_in <= #FLOP_DELAY 0;
end else begin
// Shift the address
address = (addr/READ_ADDR_B_DIV);
if (address >= C_READ_DEPTH_B) begin
if (!C_DISABLE_WARN_BHV_RANGE) begin
$fdisplay(ADDRFILE,
"%0s WARNING: Address %0h is outside range for B Read",
C_CORENAME, addr);
end
memory_out_b <= #FLOP_DELAY 'bX;
sbiterr_in <= #FLOP_DELAY 1'bX;
dbiterr_in <= #FLOP_DELAY 1'bX;
rdaddrecc_in <= #FLOP_DELAY 'bX;
// valid address
end else begin
if (READ_WIDTH_RATIO_B==1) begin
memory_out_b <= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_B];
end else begin
// Increment through the 'partial' words in the memory
for (i = 0; i < READ_WIDTH_RATIO_B; i = i + 1) begin
memory_out_b[MIN_WIDTH*i+:MIN_WIDTH]
<= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_B + i];
end
end
if ((C_FAMILY_LOCALPARAM == "virtex7") && C_USE_ECC == 1) begin
rdaddrecc_in <= #FLOP_DELAY addr;
if (sbiterr_arr[addr] == 1) begin
sbiterr_in <= #FLOP_DELAY 1'b1;
end else begin
sbiterr_in <= #FLOP_DELAY 1'b0;
end
if (dbiterr_arr[addr] == 1) begin
dbiterr_in <= #FLOP_DELAY 1'b1;
end else begin
dbiterr_in <= #FLOP_DELAY 1'b0;
end
end else if (C_USE_SOFTECC == 1) begin
rdaddrecc_in <= #FLOP_DELAY addr;
if (softecc_sbiterr_arr[addr] == 1) begin
sbiterr_in <= #FLOP_DELAY 1'b1;
end else begin
sbiterr_in <= #FLOP_DELAY 1'b0;
end
if (softecc_dbiterr_arr[addr] == 1) begin
dbiterr_in <= #FLOP_DELAY 1'b1;
end else begin
dbiterr_in <= #FLOP_DELAY 1'b0;
end
end else begin
rdaddrecc_in <= #FLOP_DELAY 0;
dbiterr_in <= #FLOP_DELAY 1'b0;
sbiterr_in <= #FLOP_DELAY 1'b0;
end //end SOFTECC Loop
end //end Valid address loop
end //end reset-data assignment loops
end
endtask
//**************
// reset_a
//**************
task reset_a (input reg reset);
begin
if (reset) memory_out_a <= #FLOP_DELAY inita_val;
end
endtask
//**************
// reset_b
//**************
task reset_b (input reg reset);
begin
if (reset) memory_out_b <= #FLOP_DELAY initb_val;
end
endtask
//**************
// init_memory
//**************
task init_memory;
integer i, j, addr_step;
integer status;
reg [C_WRITE_WIDTH_A-1:0] default_data;
begin
default_data = 0;
//Display output message indicating that the behavioral model is being
//initialized
if (C_USE_DEFAULT_DATA || C_LOAD_INIT_FILE) $display(" Block Memory Generator module loading initial data...");
// Convert the default to hex
if (C_USE_DEFAULT_DATA) begin
if (default_data_str == "") begin
$fdisplay(ERRFILE, "%0s ERROR: C_DEFAULT_DATA is empty!", C_CORENAME);
$finish;
end else begin
status = $sscanf(default_data_str, "%h", default_data);
if (status == 0) begin
$fdisplay(ERRFILE, {"%0s ERROR: Unsuccessful hexadecimal read",
"from C_DEFAULT_DATA: %0s"},
C_CORENAME, C_DEFAULT_DATA);
$finish;
end
end
end
// Step by WRITE_ADDR_A_DIV through the memory via the
// Port A write interface to hit every location once
addr_step = WRITE_ADDR_A_DIV;
// 'write' to every location with default (or 0)
for (i = 0; i < C_WRITE_DEPTH_A*addr_step; i = i + addr_step) begin
write_a(i, {C_WEA_WIDTH{1'b1}}, default_data, 1'b0, 1'b0);
end
// Get specialized data from the MIF file
if (C_LOAD_INIT_FILE) begin
if (init_file_str == "") begin
$fdisplay(ERRFILE, "%0s ERROR: C_INIT_FILE_NAME is empty!",
C_CORENAME);
$finish;
end else begin
initfile = $fopen(init_file_str, "r");
if (initfile == 0) begin
$fdisplay(ERRFILE, {"%0s, ERROR: Problem opening",
"C_INIT_FILE_NAME: %0s!"},
C_CORENAME, init_file_str);
$finish;
end else begin
// loop through the mif file, loading in the data
for (i = 0; i < C_WRITE_DEPTH_A*addr_step; i = i + addr_step) begin
status = $fscanf(initfile, "%b", mif_data);
if (status > 0) begin
write_a(i, {C_WEA_WIDTH{1'b1}}, mif_data, 1'b0, 1'b0);
end
end
$fclose(initfile);
end //initfile
end //init_file_str
end //C_LOAD_INIT_FILE
if (C_USE_BRAM_BLOCK) begin
// Get specialized data from the MIF file
if (C_INIT_FILE != "NONE") begin
if (mem_init_file_str == "") begin
$fdisplay(ERRFILE, "%0s ERROR: C_INIT_FILE is empty!",
C_CORENAME);
$finish;
end else begin
meminitfile = $fopen(mem_init_file_str, "r");
if (meminitfile == 0) begin
$fdisplay(ERRFILE, {"%0s, ERROR: Problem opening",
"C_INIT_FILE: %0s!"},
C_CORENAME, mem_init_file_str);
$finish;
end else begin
// loop through the mif file, loading in the data
$readmemh(mem_init_file_str, memory );
for (j = 0; j < MAX_DEPTH-1 ; j = j + 1) begin
end
$fclose(meminitfile);
end //meminitfile
end //mem_init_file_str
end //C_INIT_FILE
end //C_USE_BRAM_BLOCK
//Display output message indicating that the behavioral model is done
//initializing
if (C_USE_DEFAULT_DATA || C_LOAD_INIT_FILE)
$display(" Block Memory Generator data initialization complete.");
end
endtask
//**************
// log2roundup
//**************
function integer log2roundup (input integer data_value);
integer width;
integer cnt;
begin
width = 0;
if (data_value > 1) begin
for(cnt=1 ; cnt < data_value ; cnt = cnt * 2) begin
width = width + 1;
end //loop
end //if
log2roundup = width;
end //log2roundup
endfunction
//*******************
// collision_check
//*******************
function integer collision_check (input reg [C_ADDRA_WIDTH-1:0] addr_a,
input integer iswrite_a,
input reg [C_ADDRB_WIDTH-1:0] addr_b,
input integer iswrite_b);
reg c_aw_bw, c_aw_br, c_ar_bw;
integer scaled_addra_to_waddrb_width;
integer scaled_addrb_to_waddrb_width;
integer scaled_addra_to_waddra_width;
integer scaled_addrb_to_waddra_width;
integer scaled_addra_to_raddrb_width;
integer scaled_addrb_to_raddrb_width;
integer scaled_addra_to_raddra_width;
integer scaled_addrb_to_raddra_width;
begin
c_aw_bw = 0;
c_aw_br = 0;
c_ar_bw = 0;
//If write_addr_b_width is smaller, scale both addresses to that width for
//comparing write_addr_a and write_addr_b; addr_a starts as C_ADDRA_WIDTH,
//scale it down to write_addr_b_width. addr_b starts as C_ADDRB_WIDTH,
//scale it down to write_addr_b_width. Once both are scaled to
//write_addr_b_width, compare.
scaled_addra_to_waddrb_width = ((addr_a)/
2**(C_ADDRA_WIDTH-write_addr_b_width));
scaled_addrb_to_waddrb_width = ((addr_b)/
2**(C_ADDRB_WIDTH-write_addr_b_width));
//If write_addr_a_width is smaller, scale both addresses to that width for
//comparing write_addr_a and write_addr_b; addr_a starts as C_ADDRA_WIDTH,
//scale it down to write_addr_a_width. addr_b starts as C_ADDRB_WIDTH,
//scale it down to write_addr_a_width. Once both are scaled to
//write_addr_a_width, compare.
scaled_addra_to_waddra_width = ((addr_a)/
2**(C_ADDRA_WIDTH-write_addr_a_width));
scaled_addrb_to_waddra_width = ((addr_b)/
2**(C_ADDRB_WIDTH-write_addr_a_width));
//If read_addr_b_width is smaller, scale both addresses to that width for
//comparing write_addr_a and read_addr_b; addr_a starts as C_ADDRA_WIDTH,
//scale it down to read_addr_b_width. addr_b starts as C_ADDRB_WIDTH,
//scale it down to read_addr_b_width. Once both are scaled to
//read_addr_b_width, compare.
scaled_addra_to_raddrb_width = ((addr_a)/
2**(C_ADDRA_WIDTH-read_addr_b_width));
scaled_addrb_to_raddrb_width = ((addr_b)/
2**(C_ADDRB_WIDTH-read_addr_b_width));
//If read_addr_a_width is smaller, scale both addresses to that width for
//comparing read_addr_a and write_addr_b; addr_a starts as C_ADDRA_WIDTH,
//scale it down to read_addr_a_width. addr_b starts as C_ADDRB_WIDTH,
//scale it down to read_addr_a_width. Once both are scaled to
//read_addr_a_width, compare.
scaled_addra_to_raddra_width = ((addr_a)/
2**(C_ADDRA_WIDTH-read_addr_a_width));
scaled_addrb_to_raddra_width = ((addr_b)/
2**(C_ADDRB_WIDTH-read_addr_a_width));
//Look for a write-write collision. In order for a write-write
//collision to exist, both ports must have a write transaction.
if (iswrite_a && iswrite_b) begin
if (write_addr_a_width > write_addr_b_width) begin
if (scaled_addra_to_waddrb_width == scaled_addrb_to_waddrb_width) begin
c_aw_bw = 1;
end else begin
c_aw_bw = 0;
end
end else begin
if (scaled_addrb_to_waddra_width == scaled_addra_to_waddra_width) begin
c_aw_bw = 1;
end else begin
c_aw_bw = 0;
end
end //width
end //iswrite_a and iswrite_b
//If the B port is reading (which means it is enabled - so could be
//a TX_WRITE or TX_READ), then check for a write-read collision).
//This could happen whether or not a write-write collision exists due
//to asymmetric write/read ports.
if (iswrite_a) begin
if (write_addr_a_width > read_addr_b_width) begin
if (scaled_addra_to_raddrb_width == scaled_addrb_to_raddrb_width) begin
c_aw_br = 1;
end else begin
c_aw_br = 0;
end
end else begin
if (scaled_addrb_to_waddra_width == scaled_addra_to_waddra_width) begin
c_aw_br = 1;
end else begin
c_aw_br = 0;
end
end //width
end //iswrite_a
//If the A port is reading (which means it is enabled - so could be
// a TX_WRITE or TX_READ), then check for a write-read collision).
//This could happen whether or not a write-write collision exists due
// to asymmetric write/read ports.
if (iswrite_b) begin
if (read_addr_a_width > write_addr_b_width) begin
if (scaled_addra_to_waddrb_width == scaled_addrb_to_waddrb_width) begin
c_ar_bw = 1;
end else begin
c_ar_bw = 0;
end
end else begin
if (scaled_addrb_to_raddra_width == scaled_addra_to_raddra_width) begin
c_ar_bw = 1;
end else begin
c_ar_bw = 0;
end
end //width
end //iswrite_b
collision_check = c_aw_bw | c_aw_br | c_ar_bw;
end
endfunction
//*******************************
// power on values
//*******************************
initial begin
// Load up the memory
init_memory;
// Load up the output registers and latches
if ($sscanf(inita_str, "%h", inita_val)) begin
memory_out_a = inita_val;
end else begin
memory_out_a = 0;
end
if ($sscanf(initb_str, "%h", initb_val)) begin
memory_out_b = initb_val;
end else begin
memory_out_b = 0;
end
sbiterr_in = 1'b0;
dbiterr_in = 1'b0;
rdaddrecc_in = 0;
// Determine the effective address widths for each of the 4 ports
write_addr_a_width = C_ADDRA_WIDTH - log2roundup(WRITE_ADDR_A_DIV);
read_addr_a_width = C_ADDRA_WIDTH - log2roundup(READ_ADDR_A_DIV);
write_addr_b_width = C_ADDRB_WIDTH - log2roundup(WRITE_ADDR_B_DIV);
read_addr_b_width = C_ADDRB_WIDTH - log2roundup(READ_ADDR_B_DIV);
$display("Block Memory Generator module %m is using a behavioral model for simulation which will not precisely model memory collision behavior.");
end
//***************************************************************************
// These are the main blocks which schedule read and write operations
// Note that the reset priority feature at the latch stage is only supported
// for Spartan-6. For other families, the default priority at the latch stage
// is "CE"
//***************************************************************************
// Synchronous clocks: schedule port operations with respect to
// both write operating modes
generate
if(C_COMMON_CLK && (C_WRITE_MODE_A == "WRITE_FIRST") && (C_WRITE_MODE_B ==
"WRITE_FIRST")) begin : com_clk_sched_wf_wf
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
end
end
else
if(C_COMMON_CLK && (C_WRITE_MODE_A == "READ_FIRST") && (C_WRITE_MODE_B ==
"WRITE_FIRST")) begin : com_clk_sched_rf_wf
always @(posedge CLKA) begin
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
end
end
else
if(C_COMMON_CLK && (C_WRITE_MODE_A == "WRITE_FIRST") && (C_WRITE_MODE_B ==
"READ_FIRST")) begin : com_clk_sched_wf_rf
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else
if(C_COMMON_CLK && (C_WRITE_MODE_A == "READ_FIRST") && (C_WRITE_MODE_B ==
"READ_FIRST")) begin : com_clk_sched_rf_rf
always @(posedge CLKA) begin
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="WRITE_FIRST") && (C_WRITE_MODE_B ==
"NO_CHANGE")) begin : com_clk_sched_wf_nc
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="READ_FIRST") && (C_WRITE_MODE_B ==
"NO_CHANGE")) begin : com_clk_sched_rf_nc
always @(posedge CLKA) begin
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="NO_CHANGE") && (C_WRITE_MODE_B ==
"WRITE_FIRST")) begin : com_clk_sched_nc_wf
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read A
if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="NO_CHANGE") && (C_WRITE_MODE_B ==
"READ_FIRST")) begin : com_clk_sched_nc_rf
always @(posedge CLKA) begin
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Read A
if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if(C_COMMON_CLK && (C_WRITE_MODE_A =="NO_CHANGE") && (C_WRITE_MODE_B ==
"NO_CHANGE")) begin : com_clk_sched_nc_nc
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read A
if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i);
//Read B
if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i);
end
end
else if(C_COMMON_CLK) begin: com_clk_sched_default
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
end
end
endgenerate
// Asynchronous clocks: port operation is independent
generate
if((!C_COMMON_CLK) && (C_WRITE_MODE_A == "WRITE_FIRST")) begin : async_clk_sched_clka_wf
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
end
end
else if((!C_COMMON_CLK) && (C_WRITE_MODE_A == "READ_FIRST")) begin : async_clk_sched_clka_rf
always @(posedge CLKA) begin
//Read A
if (rea_i) read_a(ADDRA, reseta_i);
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
end
end
else if((!C_COMMON_CLK) && (C_WRITE_MODE_A == "NO_CHANGE")) begin : async_clk_sched_clka_nc
always @(posedge CLKA) begin
//Write A
if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR);
//Read A
if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i);
end
end
endgenerate
generate
if ((!C_COMMON_CLK) && (C_WRITE_MODE_B == "WRITE_FIRST")) begin: async_clk_sched_clkb_wf
always @(posedge CLKB) begin
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
end
end
else if ((!C_COMMON_CLK) && (C_WRITE_MODE_B == "READ_FIRST")) begin: async_clk_sched_clkb_rf
always @(posedge CLKB) begin
//Read B
if (reb_i) read_b(ADDRB, resetb_i);
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
end
end
else if ((!C_COMMON_CLK) && (C_WRITE_MODE_B == "NO_CHANGE")) begin: async_clk_sched_clkb_nc
always @(posedge CLKB) begin
//Write B
if (web_i) write_b(ADDRB, web_i, DINB);
//Read B
if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i);
end
end
endgenerate
//***************************************************************
// Instantiate the variable depth output register stage module
//***************************************************************
// Port A
assign rsta_outp_stage = RSTA & (~SLEEP);
BLK_MEM_GEN_v8_2_output_stage
#(.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_RST_TYPE ("SYNC"),
.C_HAS_RST (C_HAS_RSTA),
.C_RSTRAM (C_RSTRAM_A),
.C_RST_PRIORITY (C_RST_PRIORITY_A),
.C_INIT_VAL (C_INITA_VAL),
.C_HAS_EN (C_HAS_ENA),
.C_HAS_REGCE (C_HAS_REGCEA),
.C_DATA_WIDTH (C_READ_WIDTH_A),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_MEM_OUTPUT_REGS (C_HAS_MEM_OUTPUT_REGS_A),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.NUM_STAGES (NUM_OUTPUT_STAGES_A),
.C_EN_ECC_PIPE (0),
.FLOP_DELAY (FLOP_DELAY))
reg_a
(.CLK (CLKA),
.RST (rsta_outp_stage),//(RSTA),
.EN (ENA),
.REGCE (REGCEA),
.DIN_I (memory_out_a),
.DOUT (DOUTA),
.SBITERR_IN_I (1'b0),
.DBITERR_IN_I (1'b0),
.SBITERR (),
.DBITERR (),
.RDADDRECC_IN_I ({C_ADDRB_WIDTH{1'b0}}),
.ECCPIPECE (1'b0),
.RDADDRECC ()
);
assign rstb_outp_stage = RSTB & (~SLEEP);
// Port B
BLK_MEM_GEN_v8_2_output_stage
#(.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_RST_TYPE ("SYNC"),
.C_HAS_RST (C_HAS_RSTB),
.C_RSTRAM (C_RSTRAM_B),
.C_RST_PRIORITY (C_RST_PRIORITY_B),
.C_INIT_VAL (C_INITB_VAL),
.C_HAS_EN (C_HAS_ENB),
.C_HAS_REGCE (C_HAS_REGCEB),
.C_DATA_WIDTH (C_READ_WIDTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_MEM_OUTPUT_REGS (C_HAS_MEM_OUTPUT_REGS_B),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.NUM_STAGES (NUM_OUTPUT_STAGES_B),
.C_EN_ECC_PIPE (C_EN_ECC_PIPE),
.FLOP_DELAY (FLOP_DELAY))
reg_b
(.CLK (CLKB),
.RST (rstb_outp_stage),//(RSTB),
.EN (ENB),
.REGCE (REGCEB),
.DIN_I (memory_out_b),
.DOUT (dout_i),
.SBITERR_IN_I (sbiterr_in),
.DBITERR_IN_I (dbiterr_in),
.SBITERR (sbiterr_i),
.DBITERR (dbiterr_i),
.RDADDRECC_IN_I (rdaddrecc_in),
.ECCPIPECE (ECCPIPECE),
.RDADDRECC (rdaddrecc_i)
);
//***************************************************************
// Instantiate the Input and Output register stages
//***************************************************************
BLK_MEM_GEN_v8_2_softecc_output_reg_stage
#(.C_DATA_WIDTH (C_READ_WIDTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B),
.C_USE_SOFTECC (C_USE_SOFTECC),
.FLOP_DELAY (FLOP_DELAY))
has_softecc_output_reg_stage
(.CLK (CLKB),
.DIN (dout_i),
.DOUT (DOUTB),
.SBITERR_IN (sbiterr_i),
.DBITERR_IN (dbiterr_i),
.SBITERR (sbiterr_sdp),
.DBITERR (dbiterr_sdp),
.RDADDRECC_IN (rdaddrecc_i),
.RDADDRECC (rdaddrecc_sdp)
);
//****************************************************
// Synchronous collision checks
//****************************************************
// CR 780544 : To make verilog model's collison warnings in consistant with
// vhdl model, the non-blocking assignments are replaced with blocking
// assignments.
generate if (!C_DISABLE_WARN_BHV_COLL && C_COMMON_CLK) begin : sync_coll
always @(posedge CLKA) begin
// Possible collision if both are enabled and the addresses match
if (ena_i && enb_i) begin
if (wea_i || web_i) begin
is_collision = collision_check(ADDRA, wea_i, ADDRB, web_i);
end else begin
is_collision = 0;
end
end else begin
is_collision = 0;
end
// If the write port is in READ_FIRST mode, there is no collision
if (C_WRITE_MODE_A=="READ_FIRST" && wea_i && !web_i) begin
is_collision = 0;
end
if (C_WRITE_MODE_B=="READ_FIRST" && web_i && !wea_i) begin
is_collision = 0;
end
// Only flag if one of the accesses is a write
if (is_collision && (wea_i || web_i)) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A %0s address: %0h, B %0s address: %0h\n",
wea_i ? "write" : "read", ADDRA,
web_i ? "write" : "read", ADDRB);
end
end
//****************************************************
// Asynchronous collision checks
//****************************************************
end else if (!C_DISABLE_WARN_BHV_COLL && !C_COMMON_CLK) begin : async_coll
// Delay A and B addresses in order to mimic setup/hold times
wire [C_ADDRA_WIDTH-1:0] #COLL_DELAY addra_delay = ADDRA;
wire [0:0] #COLL_DELAY wea_delay = wea_i;
wire #COLL_DELAY ena_delay = ena_i;
wire [C_ADDRB_WIDTH-1:0] #COLL_DELAY addrb_delay = ADDRB;
wire [0:0] #COLL_DELAY web_delay = web_i;
wire #COLL_DELAY enb_delay = enb_i;
// Do the checks w/rt A
always @(posedge CLKA) begin
// Possible collision if both are enabled and the addresses match
if (ena_i && enb_i) begin
if (wea_i || web_i) begin
is_collision_a = collision_check(ADDRA, wea_i, ADDRB, web_i);
end else begin
is_collision_a = 0;
end
end else begin
is_collision_a = 0;
end
if (ena_i && enb_delay) begin
if(wea_i || web_delay) begin
is_collision_delay_a = collision_check(ADDRA, wea_i, addrb_delay,
web_delay);
end else begin
is_collision_delay_a = 0;
end
end else begin
is_collision_delay_a = 0;
end
// Only flag if B access is a write
if (is_collision_a && web_i) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A %0s address: %0h, B write address: %0h\n",
wea_i ? "write" : "read", ADDRA, ADDRB);
end else if (is_collision_delay_a && web_delay) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A %0s address: %0h, B write address: %0h\n",
wea_i ? "write" : "read", ADDRA, addrb_delay);
end
end
// Do the checks w/rt B
always @(posedge CLKB) begin
// Possible collision if both are enabled and the addresses match
if (ena_i && enb_i) begin
if (wea_i || web_i) begin
is_collision_b = collision_check(ADDRA, wea_i, ADDRB, web_i);
end else begin
is_collision_b = 0;
end
end else begin
is_collision_b = 0;
end
if (ena_delay && enb_i) begin
if (wea_delay || web_i) begin
is_collision_delay_b = collision_check(addra_delay, wea_delay, ADDRB,
web_i);
end else begin
is_collision_delay_b = 0;
end
end else begin
is_collision_delay_b = 0;
end
// Only flag if A access is a write
if (is_collision_b && wea_i) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A write address: %0h, B %s address: %0h\n",
ADDRA, web_i ? "write" : "read", ADDRB);
end else if (is_collision_delay_b && wea_delay) begin
$fwrite(COLLFILE, "%0s collision detected at time: %0d, ",
C_CORENAME, $time);
$fwrite(COLLFILE, "A write address: %0h, B %s address: %0h\n",
addra_delay, web_i ? "write" : "read", ADDRB);
end
end
end
endgenerate
endmodule
//*****************************************************************************
// Top module wraps Input register and Memory module
//
// This module is the top-level behavioral model and this implements the memory
// module and the input registers
//*****************************************************************************
module blk_mem_gen_v8_2
#(parameter C_CORENAME = "blk_mem_gen_v8_2",
parameter C_FAMILY = "virtex7",
parameter C_XDEVICEFAMILY = "virtex7",
parameter C_ELABORATION_DIR = "",
parameter C_INTERFACE_TYPE = 0,
parameter C_USE_BRAM_BLOCK = 0,
parameter C_CTRL_ECC_ALGO = "NONE",
parameter C_ENABLE_32BIT_ADDRESS = 0,
parameter C_AXI_TYPE = 0,
parameter C_AXI_SLAVE_TYPE = 0,
parameter C_HAS_AXI_ID = 0,
parameter C_AXI_ID_WIDTH = 4,
parameter C_MEM_TYPE = 2,
parameter C_BYTE_SIZE = 9,
parameter C_ALGORITHM = 1,
parameter C_PRIM_TYPE = 3,
parameter C_LOAD_INIT_FILE = 0,
parameter C_INIT_FILE_NAME = "",
parameter C_INIT_FILE = "",
parameter C_USE_DEFAULT_DATA = 0,
parameter C_DEFAULT_DATA = "0",
//parameter C_RST_TYPE = "SYNC",
parameter C_HAS_RSTA = 0,
parameter C_RST_PRIORITY_A = "CE",
parameter C_RSTRAM_A = 0,
parameter C_INITA_VAL = "0",
parameter C_HAS_ENA = 1,
parameter C_HAS_REGCEA = 0,
parameter C_USE_BYTE_WEA = 0,
parameter C_WEA_WIDTH = 1,
parameter C_WRITE_MODE_A = "WRITE_FIRST",
parameter C_WRITE_WIDTH_A = 32,
parameter C_READ_WIDTH_A = 32,
parameter C_WRITE_DEPTH_A = 64,
parameter C_READ_DEPTH_A = 64,
parameter C_ADDRA_WIDTH = 5,
parameter C_HAS_RSTB = 0,
parameter C_RST_PRIORITY_B = "CE",
parameter C_RSTRAM_B = 0,
parameter C_INITB_VAL = "",
parameter C_HAS_ENB = 1,
parameter C_HAS_REGCEB = 0,
parameter C_USE_BYTE_WEB = 0,
parameter C_WEB_WIDTH = 1,
parameter C_WRITE_MODE_B = "WRITE_FIRST",
parameter C_WRITE_WIDTH_B = 32,
parameter C_READ_WIDTH_B = 32,
parameter C_WRITE_DEPTH_B = 64,
parameter C_READ_DEPTH_B = 64,
parameter C_ADDRB_WIDTH = 5,
parameter C_HAS_MEM_OUTPUT_REGS_A = 0,
parameter C_HAS_MEM_OUTPUT_REGS_B = 0,
parameter C_HAS_MUX_OUTPUT_REGS_A = 0,
parameter C_HAS_MUX_OUTPUT_REGS_B = 0,
parameter C_HAS_SOFTECC_INPUT_REGS_A = 0,
parameter C_HAS_SOFTECC_OUTPUT_REGS_B= 0,
parameter C_MUX_PIPELINE_STAGES = 0,
parameter C_USE_SOFTECC = 0,
parameter C_USE_ECC = 0,
parameter C_EN_ECC_PIPE = 0,
parameter C_HAS_INJECTERR = 0,
parameter C_SIM_COLLISION_CHECK = "NONE",
parameter C_COMMON_CLK = 1,
parameter C_DISABLE_WARN_BHV_COLL = 0,
parameter C_EN_SLEEP_PIN = 0,
parameter C_USE_URAM = 0,
parameter C_EN_RDADDRA_CHG = 0,
parameter C_EN_RDADDRB_CHG = 0,
parameter C_EN_DEEPSLEEP_PIN = 0,
parameter C_EN_SHUTDOWN_PIN = 0,
parameter C_DISABLE_WARN_BHV_RANGE = 0,
parameter C_COUNT_36K_BRAM = "",
parameter C_COUNT_18K_BRAM = "",
parameter C_EST_POWER_SUMMARY = ""
)
(input clka,
input rsta,
input ena,
input regcea,
input [C_WEA_WIDTH-1:0] wea,
input [C_ADDRA_WIDTH-1:0] addra,
input [C_WRITE_WIDTH_A-1:0] dina,
output [C_READ_WIDTH_A-1:0] douta,
input clkb,
input rstb,
input enb,
input regceb,
input [C_WEB_WIDTH-1:0] web,
input [C_ADDRB_WIDTH-1:0] addrb,
input [C_WRITE_WIDTH_B-1:0] dinb,
output [C_READ_WIDTH_B-1:0] doutb,
input injectsbiterr,
input injectdbiterr,
output sbiterr,
output dbiterr,
output [C_ADDRB_WIDTH-1:0] rdaddrecc,
input eccpipece,
input sleep,
input deepsleep,
input shutdown,
//AXI BMG Input and Output Port Declarations
//AXI Global Signals
input s_aclk,
input s_aresetn,
//AXI Full/lite slave write (write side)
input [C_AXI_ID_WIDTH-1:0] s_axi_awid,
input [31:0] s_axi_awaddr,
input [7:0] s_axi_awlen,
input [2:0] s_axi_awsize,
input [1:0] s_axi_awburst,
input s_axi_awvalid,
output s_axi_awready,
input [C_WRITE_WIDTH_A-1:0] s_axi_wdata,
input [C_WEA_WIDTH-1:0] s_axi_wstrb,
input s_axi_wlast,
input s_axi_wvalid,
output s_axi_wready,
output [C_AXI_ID_WIDTH-1:0] s_axi_bid,
output [1:0] s_axi_bresp,
output s_axi_bvalid,
input s_axi_bready,
//AXI Full/lite slave read (write side)
input [C_AXI_ID_WIDTH-1:0] s_axi_arid,
input [31:0] s_axi_araddr,
input [7:0] s_axi_arlen,
input [2:0] s_axi_arsize,
input [1:0] s_axi_arburst,
input s_axi_arvalid,
output s_axi_arready,
output [C_AXI_ID_WIDTH-1:0] s_axi_rid,
output [C_WRITE_WIDTH_B-1:0] s_axi_rdata,
output [1:0] s_axi_rresp,
output s_axi_rlast,
output s_axi_rvalid,
input s_axi_rready,
//AXI Full/lite sideband signals
input s_axi_injectsbiterr,
input s_axi_injectdbiterr,
output s_axi_sbiterr,
output s_axi_dbiterr,
output [C_ADDRB_WIDTH-1:0] s_axi_rdaddrecc
);
//******************************
// Port and Generic Definitions
//******************************
//////////////////////////////////////////////////////////////////////////
// Generic Definitions
//////////////////////////////////////////////////////////////////////////
// C_CORENAME : Instance name of the Block Memory Generator core
// C_FAMILY,C_XDEVICEFAMILY: Designates architecture targeted. The following
// options are available - "spartan3", "spartan6",
// "virtex4", "virtex5", "virtex6" and "virtex6l".
// C_MEM_TYPE : Designates memory type.
// It can be
// 0 - Single Port Memory
// 1 - Simple Dual Port Memory
// 2 - True Dual Port Memory
// 3 - Single Port Read Only Memory
// 4 - Dual Port Read Only Memory
// C_BYTE_SIZE : Size of a byte (8 or 9 bits)
// C_ALGORITHM : Designates the algorithm method used
// for constructing the memory.
// It can be Fixed_Primitives, Minimum_Area or
// Low_Power
// C_PRIM_TYPE : Designates the user selected primitive used to
// construct the memory.
//
// C_LOAD_INIT_FILE : Designates the use of an initialization file to
// initialize memory contents.
// C_INIT_FILE_NAME : Memory initialization file name.
// C_USE_DEFAULT_DATA : Designates whether to fill remaining
// initialization space with default data
// C_DEFAULT_DATA : Default value of all memory locations
// not initialized by the memory
// initialization file.
// C_RST_TYPE : Type of reset - Synchronous or Asynchronous
// C_HAS_RSTA : Determines the presence of the RSTA port
// C_RST_PRIORITY_A : Determines the priority between CE and SR for
// Port A.
// C_RSTRAM_A : Determines if special reset behavior is used for
// Port A
// C_INITA_VAL : The initialization value for Port A
// C_HAS_ENA : Determines the presence of the ENA port
// C_HAS_REGCEA : Determines the presence of the REGCEA port
// C_USE_BYTE_WEA : Determines if the Byte Write is used or not.
// C_WEA_WIDTH : The width of the WEA port
// C_WRITE_MODE_A : Configurable write mode for Port A. It can be
// WRITE_FIRST, READ_FIRST or NO_CHANGE.
// C_WRITE_WIDTH_A : Memory write width for Port A.
// C_READ_WIDTH_A : Memory read width for Port A.
// C_WRITE_DEPTH_A : Memory write depth for Port A.
// C_READ_DEPTH_A : Memory read depth for Port A.
// C_ADDRA_WIDTH : Width of the ADDRA input port
// C_HAS_RSTB : Determines the presence of the RSTB port
// C_RST_PRIORITY_B : Determines the priority between CE and SR for
// Port B.
// C_RSTRAM_B : Determines if special reset behavior is used for
// Port B
// C_INITB_VAL : The initialization value for Port B
// C_HAS_ENB : Determines the presence of the ENB port
// C_HAS_REGCEB : Determines the presence of the REGCEB port
// C_USE_BYTE_WEB : Determines if the Byte Write is used or not.
// C_WEB_WIDTH : The width of the WEB port
// C_WRITE_MODE_B : Configurable write mode for Port B. It can be
// WRITE_FIRST, READ_FIRST or NO_CHANGE.
// C_WRITE_WIDTH_B : Memory write width for Port B.
// C_READ_WIDTH_B : Memory read width for Port B.
// C_WRITE_DEPTH_B : Memory write depth for Port B.
// C_READ_DEPTH_B : Memory read depth for Port B.
// C_ADDRB_WIDTH : Width of the ADDRB input port
// C_HAS_MEM_OUTPUT_REGS_A : Designates the use of a register at the output
// of the RAM primitive for Port A.
// C_HAS_MEM_OUTPUT_REGS_B : Designates the use of a register at the output
// of the RAM primitive for Port B.
// C_HAS_MUX_OUTPUT_REGS_A : Designates the use of a register at the output
// of the MUX for Port A.
// C_HAS_MUX_OUTPUT_REGS_B : Designates the use of a register at the output
// of the MUX for Port B.
// C_HAS_SOFTECC_INPUT_REGS_A :
// C_HAS_SOFTECC_OUTPUT_REGS_B :
// C_MUX_PIPELINE_STAGES : Designates the number of pipeline stages in
// between the muxes.
// C_USE_SOFTECC : Determines if the Soft ECC feature is used or
// not. Only applicable Spartan-6
// C_USE_ECC : Determines if the ECC feature is used or
// not. Only applicable for V5 and V6
// C_HAS_INJECTERR : Determines if the error injection pins
// are present or not. If the ECC feature
// is not used, this value is defaulted to
// 0, else the following are the allowed
// values:
// 0 : No INJECTSBITERR or INJECTDBITERR pins
// 1 : Only INJECTSBITERR pin exists
// 2 : Only INJECTDBITERR pin exists
// 3 : Both INJECTSBITERR and INJECTDBITERR pins exist
// C_SIM_COLLISION_CHECK : Controls the disabling of Unisim model collision
// warnings. It can be "ALL", "NONE",
// "Warnings_Only" or "Generate_X_Only".
// C_COMMON_CLK : Determins if the core has a single CLK input.
// C_DISABLE_WARN_BHV_COLL : Controls the Behavioral Model Collision warnings
// C_DISABLE_WARN_BHV_RANGE: Controls the Behavioral Model Out of Range
// warnings
//////////////////////////////////////////////////////////////////////////
// Port Definitions
//////////////////////////////////////////////////////////////////////////
// CLKA : Clock to synchronize all read and write operations of Port A.
// RSTA : Reset input to reset memory outputs to a user-defined
// reset state for Port A.
// ENA : Enable all read and write operations of Port A.
// REGCEA : Register Clock Enable to control each pipeline output
// register stages for Port A.
// WEA : Write Enable to enable all write operations of Port A.
// ADDRA : Address of Port A.
// DINA : Data input of Port A.
// DOUTA : Data output of Port A.
// CLKB : Clock to synchronize all read and write operations of Port B.
// RSTB : Reset input to reset memory outputs to a user-defined
// reset state for Port B.
// ENB : Enable all read and write operations of Port B.
// REGCEB : Register Clock Enable to control each pipeline output
// register stages for Port B.
// WEB : Write Enable to enable all write operations of Port B.
// ADDRB : Address of Port B.
// DINB : Data input of Port B.
// DOUTB : Data output of Port B.
// INJECTSBITERR : Single Bit ECC Error Injection Pin.
// INJECTDBITERR : Double Bit ECC Error Injection Pin.
// SBITERR : Output signal indicating that a Single Bit ECC Error has been
// detected and corrected.
// DBITERR : Output signal indicating that a Double Bit ECC Error has been
// detected.
// RDADDRECC : Read Address Output signal indicating address at which an
// ECC error has occurred.
//////////////////////////////////////////////////////////////////////////
wire SBITERR;
wire DBITERR;
wire S_AXI_AWREADY;
wire S_AXI_WREADY;
wire S_AXI_BVALID;
wire S_AXI_ARREADY;
wire S_AXI_RLAST;
wire S_AXI_RVALID;
wire S_AXI_SBITERR;
wire S_AXI_DBITERR;
wire [C_WEA_WIDTH-1:0] WEA = wea;
wire [C_ADDRA_WIDTH-1:0] ADDRA = addra;
wire [C_WRITE_WIDTH_A-1:0] DINA = dina;
wire [C_READ_WIDTH_A-1:0] DOUTA;
wire [C_WEB_WIDTH-1:0] WEB = web;
wire [C_ADDRB_WIDTH-1:0] ADDRB = addrb;
wire [C_WRITE_WIDTH_B-1:0] DINB = dinb;
wire [C_READ_WIDTH_B-1:0] DOUTB;
wire [C_ADDRB_WIDTH-1:0] RDADDRECC;
wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID = s_axi_awid;
wire [31:0] S_AXI_AWADDR = s_axi_awaddr;
wire [7:0] S_AXI_AWLEN = s_axi_awlen;
wire [2:0] S_AXI_AWSIZE = s_axi_awsize;
wire [1:0] S_AXI_AWBURST = s_axi_awburst;
wire [C_WRITE_WIDTH_A-1:0] S_AXI_WDATA = s_axi_wdata;
wire [C_WEA_WIDTH-1:0] S_AXI_WSTRB = s_axi_wstrb;
wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID;
wire [1:0] S_AXI_BRESP;
wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID = s_axi_arid;
wire [31:0] S_AXI_ARADDR = s_axi_araddr;
wire [7:0] S_AXI_ARLEN = s_axi_arlen;
wire [2:0] S_AXI_ARSIZE = s_axi_arsize;
wire [1:0] S_AXI_ARBURST = s_axi_arburst;
wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID;
wire [C_WRITE_WIDTH_B-1:0] S_AXI_RDATA;
wire [1:0] S_AXI_RRESP;
wire [C_ADDRB_WIDTH-1:0] S_AXI_RDADDRECC;
// Added to fix the simulation warning #CR731605
wire [C_WEB_WIDTH-1:0] WEB_parameterized = 0;
wire ECCPIPECE;
wire SLEEP;
assign CLKA = clka;
assign RSTA = rsta;
assign ENA = ena;
assign REGCEA = regcea;
assign CLKB = clkb;
assign RSTB = rstb;
assign ENB = enb;
assign REGCEB = regceb;
assign INJECTSBITERR = injectsbiterr;
assign INJECTDBITERR = injectdbiterr;
assign ECCPIPECE = eccpipece;
assign SLEEP = sleep;
assign sbiterr = SBITERR;
assign dbiterr = DBITERR;
assign S_ACLK = s_aclk;
assign S_ARESETN = s_aresetn;
assign S_AXI_AWVALID = s_axi_awvalid;
assign s_axi_awready = S_AXI_AWREADY;
assign S_AXI_WLAST = s_axi_wlast;
assign S_AXI_WVALID = s_axi_wvalid;
assign s_axi_wready = S_AXI_WREADY;
assign s_axi_bvalid = S_AXI_BVALID;
assign S_AXI_BREADY = s_axi_bready;
assign S_AXI_ARVALID = s_axi_arvalid;
assign s_axi_arready = S_AXI_ARREADY;
assign s_axi_rlast = S_AXI_RLAST;
assign s_axi_rvalid = S_AXI_RVALID;
assign S_AXI_RREADY = s_axi_rready;
assign S_AXI_INJECTSBITERR = s_axi_injectsbiterr;
assign S_AXI_INJECTDBITERR = s_axi_injectdbiterr;
assign s_axi_sbiterr = S_AXI_SBITERR;
assign s_axi_dbiterr = S_AXI_DBITERR;
assign doutb = DOUTB;
assign douta = DOUTA;
assign rdaddrecc = RDADDRECC;
assign s_axi_bid = S_AXI_BID;
assign s_axi_bresp = S_AXI_BRESP;
assign s_axi_rid = S_AXI_RID;
assign s_axi_rdata = S_AXI_RDATA;
assign s_axi_rresp = S_AXI_RRESP;
assign s_axi_rdaddrecc = S_AXI_RDADDRECC;
localparam FLOP_DELAY = 100; // 100 ps
reg injectsbiterr_in;
reg injectdbiterr_in;
reg rsta_in;
reg ena_in;
reg regcea_in;
reg [C_WEA_WIDTH-1:0] wea_in;
reg [C_ADDRA_WIDTH-1:0] addra_in;
reg [C_WRITE_WIDTH_A-1:0] dina_in;
wire [C_ADDRA_WIDTH-1:0] s_axi_awaddr_out_c;
wire [C_ADDRB_WIDTH-1:0] s_axi_araddr_out_c;
wire s_axi_wr_en_c;
wire s_axi_rd_en_c;
wire s_aresetn_a_c;
wire [7:0] s_axi_arlen_c ;
wire [C_AXI_ID_WIDTH-1 : 0] s_axi_rid_c;
wire [C_WRITE_WIDTH_B-1 : 0] s_axi_rdata_c;
wire [1:0] s_axi_rresp_c;
wire s_axi_rlast_c;
wire s_axi_rvalid_c;
wire s_axi_rready_c;
wire regceb_c;
localparam C_AXI_PAYLOAD = (C_HAS_MUX_OUTPUT_REGS_B == 1)?C_WRITE_WIDTH_B+C_AXI_ID_WIDTH+3:C_AXI_ID_WIDTH+3;
wire [C_AXI_PAYLOAD-1 : 0] s_axi_payload_c;
wire [C_AXI_PAYLOAD-1 : 0] m_axi_payload_c;
//**************
// log2roundup
//**************
function integer log2roundup (input integer data_value);
integer width;
integer cnt;
begin
width = 0;
if (data_value > 1) begin
for(cnt=1 ; cnt < data_value ; cnt = cnt * 2) begin
width = width + 1;
end //loop
end //if
log2roundup = width;
end //log2roundup
endfunction
//**************
// log2int
//**************
function integer log2int (input integer data_value);
integer width;
integer cnt;
begin
width = 0;
cnt= data_value;
for(cnt=data_value ; cnt >1 ; cnt = cnt / 2) begin
width = width + 1;
end //loop
log2int = width;
end //log2int
endfunction
//**************************************************************************
// FUNCTION : divroundup
// Returns the ceiling value of the division
// Data_value - the quantity to be divided, dividend
// Divisor - the value to divide the data_value by
//**************************************************************************
function integer divroundup (input integer data_value,input integer divisor);
integer div;
begin
div = data_value/divisor;
if ((data_value % divisor) != 0) begin
div = div+1;
end //if
divroundup = div;
end //if
endfunction
localparam AXI_FULL_MEMORY_SLAVE = ((C_AXI_SLAVE_TYPE == 0 && C_AXI_TYPE == 1)?1:0);
localparam C_AXI_ADDR_WIDTH_MSB = C_ADDRA_WIDTH+log2roundup(C_WRITE_WIDTH_A/8);
localparam C_AXI_ADDR_WIDTH = C_AXI_ADDR_WIDTH_MSB;
//Data Width Number of LSB address bits to be discarded
//1 to 16 1
//17 to 32 2
//33 to 64 3
//65 to 128 4
//129 to 256 5
//257 to 512 6
//513 to 1024 7
// The following two constants determine this.
localparam LOWER_BOUND_VAL = (log2roundup(divroundup(C_WRITE_WIDTH_A,8) == 0))?0:(log2roundup(divroundup(C_WRITE_WIDTH_A,8)));
localparam C_AXI_ADDR_WIDTH_LSB = ((AXI_FULL_MEMORY_SLAVE == 1)?0:LOWER_BOUND_VAL);
localparam C_AXI_OS_WR = 2;
//***********************************************
// INPUT REGISTERS.
//***********************************************
generate if (C_HAS_SOFTECC_INPUT_REGS_A==0) begin : no_softecc_input_reg_stage
always @* begin
injectsbiterr_in = INJECTSBITERR;
injectdbiterr_in = INJECTDBITERR;
rsta_in = RSTA;
ena_in = ENA;
regcea_in = REGCEA;
wea_in = WEA;
addra_in = ADDRA;
dina_in = DINA;
end //end always
end //end no_softecc_input_reg_stage
endgenerate
generate if (C_HAS_SOFTECC_INPUT_REGS_A==1) begin : has_softecc_input_reg_stage
always @(posedge CLKA) begin
injectsbiterr_in <= #FLOP_DELAY INJECTSBITERR;
injectdbiterr_in <= #FLOP_DELAY INJECTDBITERR;
rsta_in <= #FLOP_DELAY RSTA;
ena_in <= #FLOP_DELAY ENA;
regcea_in <= #FLOP_DELAY REGCEA;
wea_in <= #FLOP_DELAY WEA;
addra_in <= #FLOP_DELAY ADDRA;
dina_in <= #FLOP_DELAY DINA;
end //end always
end //end input_reg_stages generate statement
endgenerate
generate if ((C_INTERFACE_TYPE == 0) && (C_ENABLE_32BIT_ADDRESS == 0)) begin : native_mem_module
BLK_MEM_GEN_v8_2_mem_module
#(.C_CORENAME (C_CORENAME),
.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_MEM_TYPE (C_MEM_TYPE),
.C_BYTE_SIZE (C_BYTE_SIZE),
.C_ALGORITHM (C_ALGORITHM),
.C_USE_BRAM_BLOCK (C_USE_BRAM_BLOCK),
.C_PRIM_TYPE (C_PRIM_TYPE),
.C_LOAD_INIT_FILE (C_LOAD_INIT_FILE),
.C_INIT_FILE_NAME (C_INIT_FILE_NAME),
.C_INIT_FILE (C_INIT_FILE),
.C_USE_DEFAULT_DATA (C_USE_DEFAULT_DATA),
.C_DEFAULT_DATA (C_DEFAULT_DATA),
.C_RST_TYPE ("SYNC"),
.C_HAS_RSTA (C_HAS_RSTA),
.C_RST_PRIORITY_A (C_RST_PRIORITY_A),
.C_RSTRAM_A (C_RSTRAM_A),
.C_INITA_VAL (C_INITA_VAL),
.C_HAS_ENA (C_HAS_ENA),
.C_HAS_REGCEA (C_HAS_REGCEA),
.C_USE_BYTE_WEA (C_USE_BYTE_WEA),
.C_WEA_WIDTH (C_WEA_WIDTH),
.C_WRITE_MODE_A (C_WRITE_MODE_A),
.C_WRITE_WIDTH_A (C_WRITE_WIDTH_A),
.C_READ_WIDTH_A (C_READ_WIDTH_A),
.C_WRITE_DEPTH_A (C_WRITE_DEPTH_A),
.C_READ_DEPTH_A (C_READ_DEPTH_A),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH),
.C_HAS_RSTB (C_HAS_RSTB),
.C_RST_PRIORITY_B (C_RST_PRIORITY_B),
.C_RSTRAM_B (C_RSTRAM_B),
.C_INITB_VAL (C_INITB_VAL),
.C_HAS_ENB (C_HAS_ENB),
.C_HAS_REGCEB (C_HAS_REGCEB),
.C_USE_BYTE_WEB (C_USE_BYTE_WEB),
.C_WEB_WIDTH (C_WEB_WIDTH),
.C_WRITE_MODE_B (C_WRITE_MODE_B),
.C_WRITE_WIDTH_B (C_WRITE_WIDTH_B),
.C_READ_WIDTH_B (C_READ_WIDTH_B),
.C_WRITE_DEPTH_B (C_WRITE_DEPTH_B),
.C_READ_DEPTH_B (C_READ_DEPTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_MEM_OUTPUT_REGS_A (C_HAS_MEM_OUTPUT_REGS_A),
.C_HAS_MEM_OUTPUT_REGS_B (C_HAS_MEM_OUTPUT_REGS_B),
.C_HAS_MUX_OUTPUT_REGS_A (C_HAS_MUX_OUTPUT_REGS_A),
.C_HAS_MUX_OUTPUT_REGS_B (C_HAS_MUX_OUTPUT_REGS_B),
.C_HAS_SOFTECC_INPUT_REGS_A (C_HAS_SOFTECC_INPUT_REGS_A),
.C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B),
.C_MUX_PIPELINE_STAGES (C_MUX_PIPELINE_STAGES),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.C_HAS_INJECTERR (C_HAS_INJECTERR),
.C_SIM_COLLISION_CHECK (C_SIM_COLLISION_CHECK),
.C_COMMON_CLK (C_COMMON_CLK),
.FLOP_DELAY (FLOP_DELAY),
.C_DISABLE_WARN_BHV_COLL (C_DISABLE_WARN_BHV_COLL),
.C_EN_ECC_PIPE (C_EN_ECC_PIPE),
.C_DISABLE_WARN_BHV_RANGE (C_DISABLE_WARN_BHV_RANGE))
blk_mem_gen_v8_2_inst
(.CLKA (CLKA),
.RSTA (rsta_in),
.ENA (ena_in),
.REGCEA (regcea_in),
.WEA (wea_in),
.ADDRA (addra_in),
.DINA (dina_in),
.DOUTA (DOUTA),
.CLKB (CLKB),
.RSTB (RSTB),
.ENB (ENB),
.REGCEB (REGCEB),
.WEB (WEB),
.ADDRB (ADDRB),
.DINB (DINB),
.DOUTB (DOUTB),
.INJECTSBITERR (injectsbiterr_in),
.INJECTDBITERR (injectdbiterr_in),
.ECCPIPECE (ECCPIPECE),
.SLEEP (SLEEP),
.SBITERR (SBITERR),
.DBITERR (DBITERR),
.RDADDRECC (RDADDRECC)
);
end
endgenerate
generate if((C_INTERFACE_TYPE == 0) && (C_ENABLE_32BIT_ADDRESS == 1)) begin : native_mem_mapped_module
localparam C_ADDRA_WIDTH_ACTUAL = log2roundup(C_WRITE_DEPTH_A);
localparam C_ADDRB_WIDTH_ACTUAL = log2roundup(C_WRITE_DEPTH_B);
localparam C_ADDRA_WIDTH_MSB = C_ADDRA_WIDTH_ACTUAL+log2int(C_WRITE_WIDTH_A/8);
localparam C_ADDRB_WIDTH_MSB = C_ADDRB_WIDTH_ACTUAL+log2int(C_WRITE_WIDTH_B/8);
// localparam C_ADDRA_WIDTH_MSB = C_ADDRA_WIDTH_ACTUAL+log2roundup(C_WRITE_WIDTH_A/8);
// localparam C_ADDRB_WIDTH_MSB = C_ADDRB_WIDTH_ACTUAL+log2roundup(C_WRITE_WIDTH_B/8);
localparam C_MEM_MAP_ADDRA_WIDTH_MSB = C_ADDRA_WIDTH_MSB;
localparam C_MEM_MAP_ADDRB_WIDTH_MSB = C_ADDRB_WIDTH_MSB;
// Data Width Number of LSB address bits to be discarded
// 1 to 16 1
// 17 to 32 2
// 33 to 64 3
// 65 to 128 4
// 129 to 256 5
// 257 to 512 6
// 513 to 1024 7
// The following two constants determine this.
localparam MEM_MAP_LOWER_BOUND_VAL_A = (log2int(divroundup(C_WRITE_WIDTH_A,8)==0)) ? 0:(log2int(divroundup(C_WRITE_WIDTH_A,8)));
localparam MEM_MAP_LOWER_BOUND_VAL_B = (log2int(divroundup(C_WRITE_WIDTH_A,8)==0)) ? 0:(log2int(divroundup(C_WRITE_WIDTH_A,8)));
localparam C_MEM_MAP_ADDRA_WIDTH_LSB = MEM_MAP_LOWER_BOUND_VAL_A;
localparam C_MEM_MAP_ADDRB_WIDTH_LSB = MEM_MAP_LOWER_BOUND_VAL_B;
wire [C_ADDRB_WIDTH_ACTUAL-1 :0] rdaddrecc_i;
wire [C_ADDRB_WIDTH-1:C_MEM_MAP_ADDRB_WIDTH_MSB] msb_zero_i;
wire [C_MEM_MAP_ADDRB_WIDTH_LSB-1:0] lsb_zero_i;
assign msb_zero_i = 0;
assign lsb_zero_i = 0;
assign RDADDRECC = {msb_zero_i,rdaddrecc_i,lsb_zero_i};
BLK_MEM_GEN_v8_2_mem_module
#(.C_CORENAME (C_CORENAME),
.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_MEM_TYPE (C_MEM_TYPE),
.C_BYTE_SIZE (C_BYTE_SIZE),
.C_USE_BRAM_BLOCK (C_USE_BRAM_BLOCK),
.C_ALGORITHM (C_ALGORITHM),
.C_PRIM_TYPE (C_PRIM_TYPE),
.C_LOAD_INIT_FILE (C_LOAD_INIT_FILE),
.C_INIT_FILE_NAME (C_INIT_FILE_NAME),
.C_INIT_FILE (C_INIT_FILE),
.C_USE_DEFAULT_DATA (C_USE_DEFAULT_DATA),
.C_DEFAULT_DATA (C_DEFAULT_DATA),
.C_RST_TYPE ("SYNC"),
.C_HAS_RSTA (C_HAS_RSTA),
.C_RST_PRIORITY_A (C_RST_PRIORITY_A),
.C_RSTRAM_A (C_RSTRAM_A),
.C_INITA_VAL (C_INITA_VAL),
.C_HAS_ENA (C_HAS_ENA),
.C_HAS_REGCEA (C_HAS_REGCEA),
.C_USE_BYTE_WEA (C_USE_BYTE_WEA),
.C_WEA_WIDTH (C_WEA_WIDTH),
.C_WRITE_MODE_A (C_WRITE_MODE_A),
.C_WRITE_WIDTH_A (C_WRITE_WIDTH_A),
.C_READ_WIDTH_A (C_READ_WIDTH_A),
.C_WRITE_DEPTH_A (C_WRITE_DEPTH_A),
.C_READ_DEPTH_A (C_READ_DEPTH_A),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH_ACTUAL),
.C_HAS_RSTB (C_HAS_RSTB),
.C_RST_PRIORITY_B (C_RST_PRIORITY_B),
.C_RSTRAM_B (C_RSTRAM_B),
.C_INITB_VAL (C_INITB_VAL),
.C_HAS_ENB (C_HAS_ENB),
.C_HAS_REGCEB (C_HAS_REGCEB),
.C_USE_BYTE_WEB (C_USE_BYTE_WEB),
.C_WEB_WIDTH (C_WEB_WIDTH),
.C_WRITE_MODE_B (C_WRITE_MODE_B),
.C_WRITE_WIDTH_B (C_WRITE_WIDTH_B),
.C_READ_WIDTH_B (C_READ_WIDTH_B),
.C_WRITE_DEPTH_B (C_WRITE_DEPTH_B),
.C_READ_DEPTH_B (C_READ_DEPTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH_ACTUAL),
.C_HAS_MEM_OUTPUT_REGS_A (C_HAS_MEM_OUTPUT_REGS_A),
.C_HAS_MEM_OUTPUT_REGS_B (C_HAS_MEM_OUTPUT_REGS_B),
.C_HAS_MUX_OUTPUT_REGS_A (C_HAS_MUX_OUTPUT_REGS_A),
.C_HAS_MUX_OUTPUT_REGS_B (C_HAS_MUX_OUTPUT_REGS_B),
.C_HAS_SOFTECC_INPUT_REGS_A (C_HAS_SOFTECC_INPUT_REGS_A),
.C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B),
.C_MUX_PIPELINE_STAGES (C_MUX_PIPELINE_STAGES),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.C_HAS_INJECTERR (C_HAS_INJECTERR),
.C_SIM_COLLISION_CHECK (C_SIM_COLLISION_CHECK),
.C_COMMON_CLK (C_COMMON_CLK),
.FLOP_DELAY (FLOP_DELAY),
.C_DISABLE_WARN_BHV_COLL (C_DISABLE_WARN_BHV_COLL),
.C_EN_ECC_PIPE (C_EN_ECC_PIPE),
.C_DISABLE_WARN_BHV_RANGE (C_DISABLE_WARN_BHV_RANGE))
blk_mem_gen_v8_2_inst
(.CLKA (CLKA),
.RSTA (rsta_in),
.ENA (ena_in),
.REGCEA (regcea_in),
.WEA (wea_in),
.ADDRA (addra_in[C_MEM_MAP_ADDRA_WIDTH_MSB-1:C_MEM_MAP_ADDRA_WIDTH_LSB]),
.DINA (dina_in),
.DOUTA (DOUTA),
.CLKB (CLKB),
.RSTB (RSTB),
.ENB (ENB),
.REGCEB (REGCEB),
.WEB (WEB),
.ADDRB (ADDRB[C_MEM_MAP_ADDRB_WIDTH_MSB-1:C_MEM_MAP_ADDRB_WIDTH_LSB]),
.DINB (DINB),
.DOUTB (DOUTB),
.INJECTSBITERR (injectsbiterr_in),
.INJECTDBITERR (injectdbiterr_in),
.ECCPIPECE (ECCPIPECE),
.SLEEP (SLEEP),
.SBITERR (SBITERR),
.DBITERR (DBITERR),
.RDADDRECC (rdaddrecc_i)
);
end
endgenerate
generate if (C_HAS_MEM_OUTPUT_REGS_B == 0 && C_HAS_MUX_OUTPUT_REGS_B == 0 ) begin : no_regs
assign S_AXI_RDATA = s_axi_rdata_c;
assign S_AXI_RLAST = s_axi_rlast_c;
assign S_AXI_RVALID = s_axi_rvalid_c;
assign S_AXI_RID = s_axi_rid_c;
assign S_AXI_RRESP = s_axi_rresp_c;
assign s_axi_rready_c = S_AXI_RREADY;
end
endgenerate
generate if (C_HAS_MEM_OUTPUT_REGS_B == 1) begin : has_regceb
assign regceb_c = s_axi_rvalid_c && s_axi_rready_c;
end
endgenerate
generate if (C_HAS_MEM_OUTPUT_REGS_B == 0) begin : no_regceb
assign regceb_c = REGCEB;
end
endgenerate
generate if (C_HAS_MUX_OUTPUT_REGS_B == 1) begin : only_core_op_regs
assign s_axi_payload_c = {s_axi_rid_c,s_axi_rdata_c,s_axi_rresp_c,s_axi_rlast_c};
assign S_AXI_RID = m_axi_payload_c[C_AXI_PAYLOAD-1 : C_AXI_PAYLOAD-C_AXI_ID_WIDTH];
assign S_AXI_RDATA = m_axi_payload_c[C_AXI_PAYLOAD-C_AXI_ID_WIDTH-1 : C_AXI_PAYLOAD-C_AXI_ID_WIDTH-C_WRITE_WIDTH_B];
assign S_AXI_RRESP = m_axi_payload_c[2:1];
assign S_AXI_RLAST = m_axi_payload_c[0];
end
endgenerate
generate if (C_HAS_MEM_OUTPUT_REGS_B == 1) begin : only_emb_op_regs
assign s_axi_payload_c = {s_axi_rid_c,s_axi_rresp_c,s_axi_rlast_c};
assign S_AXI_RDATA = s_axi_rdata_c;
assign S_AXI_RID = m_axi_payload_c[C_AXI_PAYLOAD-1 : C_AXI_PAYLOAD-C_AXI_ID_WIDTH];
assign S_AXI_RRESP = m_axi_payload_c[2:1];
assign S_AXI_RLAST = m_axi_payload_c[0];
end
endgenerate
generate if (C_HAS_MUX_OUTPUT_REGS_B == 1 || C_HAS_MEM_OUTPUT_REGS_B == 1) begin : has_regs_fwd
blk_mem_axi_regs_fwd_v8_2
#(.C_DATA_WIDTH (C_AXI_PAYLOAD))
axi_regs_inst (
.ACLK (S_ACLK),
.ARESET (s_aresetn_a_c),
.S_VALID (s_axi_rvalid_c),
.S_READY (s_axi_rready_c),
.S_PAYLOAD_DATA (s_axi_payload_c),
.M_VALID (S_AXI_RVALID),
.M_READY (S_AXI_RREADY),
.M_PAYLOAD_DATA (m_axi_payload_c)
);
end
endgenerate
generate if (C_INTERFACE_TYPE == 1) begin : axi_mem_module
assign s_aresetn_a_c = !S_ARESETN;
assign S_AXI_BRESP = 2'b00;
assign s_axi_rresp_c = 2'b00;
assign s_axi_arlen_c = (C_AXI_TYPE == 1)?S_AXI_ARLEN:8'h0;
blk_mem_axi_write_wrapper_beh_v8_2
#(.C_INTERFACE_TYPE (C_INTERFACE_TYPE),
.C_AXI_TYPE (C_AXI_TYPE),
.C_AXI_SLAVE_TYPE (C_AXI_SLAVE_TYPE),
.C_MEMORY_TYPE (C_MEM_TYPE),
.C_WRITE_DEPTH_A (C_WRITE_DEPTH_A),
.C_AXI_AWADDR_WIDTH ((AXI_FULL_MEMORY_SLAVE == 1)?C_AXI_ADDR_WIDTH:C_AXI_ADDR_WIDTH-C_AXI_ADDR_WIDTH_LSB),
.C_HAS_AXI_ID (C_HAS_AXI_ID),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH),
.C_AXI_WDATA_WIDTH (C_WRITE_WIDTH_A),
.C_AXI_OS_WR (C_AXI_OS_WR))
axi_wr_fsm (
// AXI Global Signals
.S_ACLK (S_ACLK),
.S_ARESETN (s_aresetn_a_c),
// AXI Full/Lite Slave Write interface
.S_AXI_AWADDR (S_AXI_AWADDR[C_AXI_ADDR_WIDTH_MSB-1:C_AXI_ADDR_WIDTH_LSB]),
.S_AXI_AWLEN (S_AXI_AWLEN),
.S_AXI_AWID (S_AXI_AWID),
.S_AXI_AWSIZE (S_AXI_AWSIZE),
.S_AXI_AWBURST (S_AXI_AWBURST),
.S_AXI_AWVALID (S_AXI_AWVALID),
.S_AXI_AWREADY (S_AXI_AWREADY),
.S_AXI_WVALID (S_AXI_WVALID),
.S_AXI_WREADY (S_AXI_WREADY),
.S_AXI_BVALID (S_AXI_BVALID),
.S_AXI_BREADY (S_AXI_BREADY),
.S_AXI_BID (S_AXI_BID),
// Signals for BRAM interfac(
.S_AXI_AWADDR_OUT (s_axi_awaddr_out_c),
.S_AXI_WR_EN (s_axi_wr_en_c)
);
blk_mem_axi_read_wrapper_beh_v8_2
#(.C_INTERFACE_TYPE (C_INTERFACE_TYPE),
.C_AXI_TYPE (C_AXI_TYPE),
.C_AXI_SLAVE_TYPE (C_AXI_SLAVE_TYPE),
.C_MEMORY_TYPE (C_MEM_TYPE),
.C_WRITE_WIDTH_A (C_WRITE_WIDTH_A),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH),
.C_AXI_PIPELINE_STAGES (1),
.C_AXI_ARADDR_WIDTH ((AXI_FULL_MEMORY_SLAVE == 1)?C_AXI_ADDR_WIDTH:C_AXI_ADDR_WIDTH-C_AXI_ADDR_WIDTH_LSB),
.C_HAS_AXI_ID (C_HAS_AXI_ID),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH))
axi_rd_sm(
//AXI Global Signals
.S_ACLK (S_ACLK),
.S_ARESETN (s_aresetn_a_c),
//AXI Full/Lite Read Side
.S_AXI_ARADDR (S_AXI_ARADDR[C_AXI_ADDR_WIDTH_MSB-1:C_AXI_ADDR_WIDTH_LSB]),
.S_AXI_ARLEN (s_axi_arlen_c),
.S_AXI_ARSIZE (S_AXI_ARSIZE),
.S_AXI_ARBURST (S_AXI_ARBURST),
.S_AXI_ARVALID (S_AXI_ARVALID),
.S_AXI_ARREADY (S_AXI_ARREADY),
.S_AXI_RLAST (s_axi_rlast_c),
.S_AXI_RVALID (s_axi_rvalid_c),
.S_AXI_RREADY (s_axi_rready_c),
.S_AXI_ARID (S_AXI_ARID),
.S_AXI_RID (s_axi_rid_c),
//AXI Full/Lite Read FSM Outputs
.S_AXI_ARADDR_OUT (s_axi_araddr_out_c),
.S_AXI_RD_EN (s_axi_rd_en_c)
);
BLK_MEM_GEN_v8_2_mem_module
#(.C_CORENAME (C_CORENAME),
.C_FAMILY (C_FAMILY),
.C_XDEVICEFAMILY (C_XDEVICEFAMILY),
.C_MEM_TYPE (C_MEM_TYPE),
.C_BYTE_SIZE (C_BYTE_SIZE),
.C_USE_BRAM_BLOCK (C_USE_BRAM_BLOCK),
.C_ALGORITHM (C_ALGORITHM),
.C_PRIM_TYPE (C_PRIM_TYPE),
.C_LOAD_INIT_FILE (C_LOAD_INIT_FILE),
.C_INIT_FILE_NAME (C_INIT_FILE_NAME),
.C_INIT_FILE (C_INIT_FILE),
.C_USE_DEFAULT_DATA (C_USE_DEFAULT_DATA),
.C_DEFAULT_DATA (C_DEFAULT_DATA),
.C_RST_TYPE ("SYNC"),
.C_HAS_RSTA (C_HAS_RSTA),
.C_RST_PRIORITY_A (C_RST_PRIORITY_A),
.C_RSTRAM_A (C_RSTRAM_A),
.C_INITA_VAL (C_INITA_VAL),
.C_HAS_ENA (1),
.C_HAS_REGCEA (C_HAS_REGCEA),
.C_USE_BYTE_WEA (1),
.C_WEA_WIDTH (C_WEA_WIDTH),
.C_WRITE_MODE_A (C_WRITE_MODE_A),
.C_WRITE_WIDTH_A (C_WRITE_WIDTH_A),
.C_READ_WIDTH_A (C_READ_WIDTH_A),
.C_WRITE_DEPTH_A (C_WRITE_DEPTH_A),
.C_READ_DEPTH_A (C_READ_DEPTH_A),
.C_ADDRA_WIDTH (C_ADDRA_WIDTH),
.C_HAS_RSTB (C_HAS_RSTB),
.C_RST_PRIORITY_B (C_RST_PRIORITY_B),
.C_RSTRAM_B (C_RSTRAM_B),
.C_INITB_VAL (C_INITB_VAL),
.C_HAS_ENB (1),
.C_HAS_REGCEB (C_HAS_MEM_OUTPUT_REGS_B),
.C_USE_BYTE_WEB (1),
.C_WEB_WIDTH (C_WEB_WIDTH),
.C_WRITE_MODE_B (C_WRITE_MODE_B),
.C_WRITE_WIDTH_B (C_WRITE_WIDTH_B),
.C_READ_WIDTH_B (C_READ_WIDTH_B),
.C_WRITE_DEPTH_B (C_WRITE_DEPTH_B),
.C_READ_DEPTH_B (C_READ_DEPTH_B),
.C_ADDRB_WIDTH (C_ADDRB_WIDTH),
.C_HAS_MEM_OUTPUT_REGS_A (0),
.C_HAS_MEM_OUTPUT_REGS_B (C_HAS_MEM_OUTPUT_REGS_B),
.C_HAS_MUX_OUTPUT_REGS_A (0),
.C_HAS_MUX_OUTPUT_REGS_B (0),
.C_HAS_SOFTECC_INPUT_REGS_A (C_HAS_SOFTECC_INPUT_REGS_A),
.C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B),
.C_MUX_PIPELINE_STAGES (C_MUX_PIPELINE_STAGES),
.C_USE_SOFTECC (C_USE_SOFTECC),
.C_USE_ECC (C_USE_ECC),
.C_HAS_INJECTERR (C_HAS_INJECTERR),
.C_SIM_COLLISION_CHECK (C_SIM_COLLISION_CHECK),
.C_COMMON_CLK (C_COMMON_CLK),
.FLOP_DELAY (FLOP_DELAY),
.C_DISABLE_WARN_BHV_COLL (C_DISABLE_WARN_BHV_COLL),
.C_EN_ECC_PIPE (0),
.C_DISABLE_WARN_BHV_RANGE (C_DISABLE_WARN_BHV_RANGE))
blk_mem_gen_v8_2_inst
(.CLKA (S_ACLK),
.RSTA (s_aresetn_a_c),
.ENA (s_axi_wr_en_c),
.REGCEA (regcea_in),
.WEA (S_AXI_WSTRB),
.ADDRA (s_axi_awaddr_out_c),
.DINA (S_AXI_WDATA),
.DOUTA (DOUTA),
.CLKB (S_ACLK),
.RSTB (s_aresetn_a_c),
.ENB (s_axi_rd_en_c),
.REGCEB (regceb_c),
.WEB (WEB_parameterized),
.ADDRB (s_axi_araddr_out_c),
.DINB (DINB),
.DOUTB (s_axi_rdata_c),
.INJECTSBITERR (injectsbiterr_in),
.INJECTDBITERR (injectdbiterr_in),
.SBITERR (SBITERR),
.DBITERR (DBITERR),
.ECCPIPECE (1'b0),
.SLEEP (1'b0),
.RDADDRECC (RDADDRECC)
);
end
endgenerate
endmodule
|
// -*- verilog -*-
//
// USRP - Universal Software Radio Peripheral
//
// Copyright (C) 2003 Matt Ettus
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
//
// Sign extension "macro"
// bits_out should be greater than bits_in
module sign_extend (in,out);
parameter bits_in=0; // FIXME Quartus insists on a default
parameter bits_out=0;
input [bits_in-1:0] in;
output [bits_out-1:0] out;
assign out = {{(bits_out-bits_in){in[bits_in-1]}},in};
endmodule
|
`include "lo_simulate.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_lo_simulate;
reg pck0;
reg [7:0] adc_d;
wire pwr_lo;
wire adc_clk;
wire ck_1356meg;
wire ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
reg cross_lo;
wire cross_hi;
wire dbg;
lo_simulate #(5,200) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg)
);
integer i, counter=0;
// main clock
always #5 pck0 = !pck0;
//cross_lo is not really synced to pck0 but it's roughly pck0/192 (24Mhz/192=125Khz)
task crank_dut;
begin
@(posedge pck0) ;
counter = counter + 1;
if (counter == 192) begin
counter = 0;
ssp_dout = $random;
cross_lo = 1;
end else begin
cross_lo = 0;
end
end
endtask
initial begin
pck0 = 0;
for (i = 0 ; i < 4096 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main
|
`include "lo_simulate.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_lo_simulate;
reg pck0;
reg [7:0] adc_d;
wire pwr_lo;
wire adc_clk;
wire ck_1356meg;
wire ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
reg cross_lo;
wire cross_hi;
wire dbg;
lo_simulate #(5,200) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg)
);
integer i, counter=0;
// main clock
always #5 pck0 = !pck0;
//cross_lo is not really synced to pck0 but it's roughly pck0/192 (24Mhz/192=125Khz)
task crank_dut;
begin
@(posedge pck0) ;
counter = counter + 1;
if (counter == 192) begin
counter = 0;
ssp_dout = $random;
cross_lo = 1;
end else begin
cross_lo = 0;
end
end
endtask
initial begin
pck0 = 0;
for (i = 0 ; i < 4096 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main
|
//Legal Notice: (C)2017 Altera Corporation. All rights reserved. Your
//use of Altera Corporation's design tools, logic functions and other
//software and tools, and its AMPP partner logic functions, and any
//output files any of the foregoing (including device programming or
//simulation files), and any associated documentation or information are
//expressly subject to the terms and conditions of the Altera Program
//License Subscription Agreement or other applicable license agreement,
//including, without limitation, that your use is for the sole purpose
//of programming logic devices manufactured by Altera and sold by Altera
//or its authorized distributors. Please refer to the applicable
//agreement for further details.
// synthesis translate_off
`timescale 1ns / 1ps
// synthesis translate_on
// turn off superfluous verilog processor warnings
// altera message_level Level1
// altera message_off 10034 10035 10036 10037 10230 10240 10030
module soc_design_Sys_Timer (
// inputs:
address,
chipselect,
clk,
reset_n,
write_n,
writedata,
// outputs:
irq,
readdata
)
;
output irq;
output [ 15: 0] readdata;
input [ 2: 0] address;
input chipselect;
input clk;
input reset_n;
input write_n;
input [ 15: 0] writedata;
wire clk_en;
wire control_interrupt_enable;
reg control_register;
wire control_wr_strobe;
reg counter_is_running;
wire counter_is_zero;
wire [ 16: 0] counter_load_value;
reg delayed_unxcounter_is_zeroxx0;
wire do_start_counter;
wire do_stop_counter;
reg force_reload;
reg [ 16: 0] internal_counter;
wire irq;
wire period_h_wr_strobe;
wire period_l_wr_strobe;
wire [ 15: 0] read_mux_out;
reg [ 15: 0] readdata;
wire status_wr_strobe;
wire timeout_event;
reg timeout_occurred;
assign clk_en = 1;
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
internal_counter <= 17'h1869F;
else if (counter_is_running || force_reload)
if (counter_is_zero || force_reload)
internal_counter <= counter_load_value;
else
internal_counter <= internal_counter - 1;
end
assign counter_is_zero = internal_counter == 0;
assign counter_load_value = 17'h1869F;
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
force_reload <= 0;
else if (clk_en)
force_reload <= period_h_wr_strobe || period_l_wr_strobe;
end
assign do_start_counter = 1;
assign do_stop_counter = 0;
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
counter_is_running <= 1'b0;
else if (clk_en)
if (do_start_counter)
counter_is_running <= -1;
else if (do_stop_counter)
counter_is_running <= 0;
end
//delayed_unxcounter_is_zeroxx0, which is an e_register
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
delayed_unxcounter_is_zeroxx0 <= 0;
else if (clk_en)
delayed_unxcounter_is_zeroxx0 <= counter_is_zero;
end
assign timeout_event = (counter_is_zero) & ~(delayed_unxcounter_is_zeroxx0);
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
timeout_occurred <= 0;
else if (clk_en)
if (status_wr_strobe)
timeout_occurred <= 0;
else if (timeout_event)
timeout_occurred <= -1;
end
assign irq = timeout_occurred && control_interrupt_enable;
//s1, which is an e_avalon_slave
assign read_mux_out = ({16 {(address == 1)}} & control_register) |
({16 {(address == 0)}} & {counter_is_running,
timeout_occurred});
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
readdata <= 0;
else if (clk_en)
readdata <= read_mux_out;
end
assign period_l_wr_strobe = chipselect && ~write_n && (address == 2);
assign period_h_wr_strobe = chipselect && ~write_n && (address == 3);
assign control_wr_strobe = chipselect && ~write_n && (address == 1);
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
control_register <= 0;
else if (control_wr_strobe)
control_register <= writedata[0];
end
assign control_interrupt_enable = control_register;
assign status_wr_strobe = chipselect && ~write_n && (address == 0);
endmodule
|
//Legal Notice: (C)2017 Altera Corporation. All rights reserved. Your
//use of Altera Corporation's design tools, logic functions and other
//software and tools, and its AMPP partner logic functions, and any
//output files any of the foregoing (including device programming or
//simulation files), and any associated documentation or information are
//expressly subject to the terms and conditions of the Altera Program
//License Subscription Agreement or other applicable license agreement,
//including, without limitation, that your use is for the sole purpose
//of programming logic devices manufactured by Altera and sold by Altera
//or its authorized distributors. Please refer to the applicable
//agreement for further details.
// synthesis translate_off
`timescale 1ns / 1ps
// synthesis translate_on
// turn off superfluous verilog processor warnings
// altera message_level Level1
// altera message_off 10034 10035 10036 10037 10230 10240 10030
module soc_design_Sys_Timer (
// inputs:
address,
chipselect,
clk,
reset_n,
write_n,
writedata,
// outputs:
irq,
readdata
)
;
output irq;
output [ 15: 0] readdata;
input [ 2: 0] address;
input chipselect;
input clk;
input reset_n;
input write_n;
input [ 15: 0] writedata;
wire clk_en;
wire control_interrupt_enable;
reg control_register;
wire control_wr_strobe;
reg counter_is_running;
wire counter_is_zero;
wire [ 16: 0] counter_load_value;
reg delayed_unxcounter_is_zeroxx0;
wire do_start_counter;
wire do_stop_counter;
reg force_reload;
reg [ 16: 0] internal_counter;
wire irq;
wire period_h_wr_strobe;
wire period_l_wr_strobe;
wire [ 15: 0] read_mux_out;
reg [ 15: 0] readdata;
wire status_wr_strobe;
wire timeout_event;
reg timeout_occurred;
assign clk_en = 1;
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
internal_counter <= 17'h1869F;
else if (counter_is_running || force_reload)
if (counter_is_zero || force_reload)
internal_counter <= counter_load_value;
else
internal_counter <= internal_counter - 1;
end
assign counter_is_zero = internal_counter == 0;
assign counter_load_value = 17'h1869F;
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
force_reload <= 0;
else if (clk_en)
force_reload <= period_h_wr_strobe || period_l_wr_strobe;
end
assign do_start_counter = 1;
assign do_stop_counter = 0;
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
counter_is_running <= 1'b0;
else if (clk_en)
if (do_start_counter)
counter_is_running <= -1;
else if (do_stop_counter)
counter_is_running <= 0;
end
//delayed_unxcounter_is_zeroxx0, which is an e_register
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
delayed_unxcounter_is_zeroxx0 <= 0;
else if (clk_en)
delayed_unxcounter_is_zeroxx0 <= counter_is_zero;
end
assign timeout_event = (counter_is_zero) & ~(delayed_unxcounter_is_zeroxx0);
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
timeout_occurred <= 0;
else if (clk_en)
if (status_wr_strobe)
timeout_occurred <= 0;
else if (timeout_event)
timeout_occurred <= -1;
end
assign irq = timeout_occurred && control_interrupt_enable;
//s1, which is an e_avalon_slave
assign read_mux_out = ({16 {(address == 1)}} & control_register) |
({16 {(address == 0)}} & {counter_is_running,
timeout_occurred});
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
readdata <= 0;
else if (clk_en)
readdata <= read_mux_out;
end
assign period_l_wr_strobe = chipselect && ~write_n && (address == 2);
assign period_h_wr_strobe = chipselect && ~write_n && (address == 3);
assign control_wr_strobe = chipselect && ~write_n && (address == 1);
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
control_register <= 0;
else if (control_wr_strobe)
control_register <= writedata[0];
end
assign control_interrupt_enable = control_register;
assign status_wr_strobe = chipselect && ~write_n && (address == 0);
endmodule
|
//Legal Notice: (C)2017 Altera Corporation. All rights reserved. Your
//use of Altera Corporation's design tools, logic functions and other
//software and tools, and its AMPP partner logic functions, and any
//output files any of the foregoing (including device programming or
//simulation files), and any associated documentation or information are
//expressly subject to the terms and conditions of the Altera Program
//License Subscription Agreement or other applicable license agreement,
//including, without limitation, that your use is for the sole purpose
//of programming logic devices manufactured by Altera and sold by Altera
//or its authorized distributors. Please refer to the applicable
//agreement for further details.
// synthesis translate_off
`timescale 1ns / 1ps
// synthesis translate_on
// turn off superfluous verilog processor warnings
// altera message_level Level1
// altera message_off 10034 10035 10036 10037 10230 10240 10030
module soc_design_Sys_Timer (
// inputs:
address,
chipselect,
clk,
reset_n,
write_n,
writedata,
// outputs:
irq,
readdata
)
;
output irq;
output [ 15: 0] readdata;
input [ 2: 0] address;
input chipselect;
input clk;
input reset_n;
input write_n;
input [ 15: 0] writedata;
wire clk_en;
wire control_interrupt_enable;
reg control_register;
wire control_wr_strobe;
reg counter_is_running;
wire counter_is_zero;
wire [ 16: 0] counter_load_value;
reg delayed_unxcounter_is_zeroxx0;
wire do_start_counter;
wire do_stop_counter;
reg force_reload;
reg [ 16: 0] internal_counter;
wire irq;
wire period_h_wr_strobe;
wire period_l_wr_strobe;
wire [ 15: 0] read_mux_out;
reg [ 15: 0] readdata;
wire status_wr_strobe;
wire timeout_event;
reg timeout_occurred;
assign clk_en = 1;
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
internal_counter <= 17'h1869F;
else if (counter_is_running || force_reload)
if (counter_is_zero || force_reload)
internal_counter <= counter_load_value;
else
internal_counter <= internal_counter - 1;
end
assign counter_is_zero = internal_counter == 0;
assign counter_load_value = 17'h1869F;
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
force_reload <= 0;
else if (clk_en)
force_reload <= period_h_wr_strobe || period_l_wr_strobe;
end
assign do_start_counter = 1;
assign do_stop_counter = 0;
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
counter_is_running <= 1'b0;
else if (clk_en)
if (do_start_counter)
counter_is_running <= -1;
else if (do_stop_counter)
counter_is_running <= 0;
end
//delayed_unxcounter_is_zeroxx0, which is an e_register
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
delayed_unxcounter_is_zeroxx0 <= 0;
else if (clk_en)
delayed_unxcounter_is_zeroxx0 <= counter_is_zero;
end
assign timeout_event = (counter_is_zero) & ~(delayed_unxcounter_is_zeroxx0);
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
timeout_occurred <= 0;
else if (clk_en)
if (status_wr_strobe)
timeout_occurred <= 0;
else if (timeout_event)
timeout_occurred <= -1;
end
assign irq = timeout_occurred && control_interrupt_enable;
//s1, which is an e_avalon_slave
assign read_mux_out = ({16 {(address == 1)}} & control_register) |
({16 {(address == 0)}} & {counter_is_running,
timeout_occurred});
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
readdata <= 0;
else if (clk_en)
readdata <= read_mux_out;
end
assign period_l_wr_strobe = chipselect && ~write_n && (address == 2);
assign period_h_wr_strobe = chipselect && ~write_n && (address == 3);
assign control_wr_strobe = chipselect && ~write_n && (address == 1);
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
control_register <= 0;
else if (control_wr_strobe)
control_register <= writedata[0];
end
assign control_interrupt_enable = control_register;
assign status_wr_strobe = chipselect && ~write_n && (address == 0);
endmodule
|
//Legal Notice: (C)2017 Altera Corporation. All rights reserved. Your
//use of Altera Corporation's design tools, logic functions and other
//software and tools, and its AMPP partner logic functions, and any
//output files any of the foregoing (including device programming or
//simulation files), and any associated documentation or information are
//expressly subject to the terms and conditions of the Altera Program
//License Subscription Agreement or other applicable license agreement,
//including, without limitation, that your use is for the sole purpose
//of programming logic devices manufactured by Altera and sold by Altera
//or its authorized distributors. Please refer to the applicable
//agreement for further details.
// synthesis translate_off
`timescale 1ns / 1ps
// synthesis translate_on
// turn off superfluous verilog processor warnings
// altera message_level Level1
// altera message_off 10034 10035 10036 10037 10230 10240 10030
module soc_design_Sys_Timer (
// inputs:
address,
chipselect,
clk,
reset_n,
write_n,
writedata,
// outputs:
irq,
readdata
)
;
output irq;
output [ 15: 0] readdata;
input [ 2: 0] address;
input chipselect;
input clk;
input reset_n;
input write_n;
input [ 15: 0] writedata;
wire clk_en;
wire control_interrupt_enable;
reg control_register;
wire control_wr_strobe;
reg counter_is_running;
wire counter_is_zero;
wire [ 16: 0] counter_load_value;
reg delayed_unxcounter_is_zeroxx0;
wire do_start_counter;
wire do_stop_counter;
reg force_reload;
reg [ 16: 0] internal_counter;
wire irq;
wire period_h_wr_strobe;
wire period_l_wr_strobe;
wire [ 15: 0] read_mux_out;
reg [ 15: 0] readdata;
wire status_wr_strobe;
wire timeout_event;
reg timeout_occurred;
assign clk_en = 1;
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
internal_counter <= 17'h1869F;
else if (counter_is_running || force_reload)
if (counter_is_zero || force_reload)
internal_counter <= counter_load_value;
else
internal_counter <= internal_counter - 1;
end
assign counter_is_zero = internal_counter == 0;
assign counter_load_value = 17'h1869F;
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
force_reload <= 0;
else if (clk_en)
force_reload <= period_h_wr_strobe || period_l_wr_strobe;
end
assign do_start_counter = 1;
assign do_stop_counter = 0;
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
counter_is_running <= 1'b0;
else if (clk_en)
if (do_start_counter)
counter_is_running <= -1;
else if (do_stop_counter)
counter_is_running <= 0;
end
//delayed_unxcounter_is_zeroxx0, which is an e_register
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
delayed_unxcounter_is_zeroxx0 <= 0;
else if (clk_en)
delayed_unxcounter_is_zeroxx0 <= counter_is_zero;
end
assign timeout_event = (counter_is_zero) & ~(delayed_unxcounter_is_zeroxx0);
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
timeout_occurred <= 0;
else if (clk_en)
if (status_wr_strobe)
timeout_occurred <= 0;
else if (timeout_event)
timeout_occurred <= -1;
end
assign irq = timeout_occurred && control_interrupt_enable;
//s1, which is an e_avalon_slave
assign read_mux_out = ({16 {(address == 1)}} & control_register) |
({16 {(address == 0)}} & {counter_is_running,
timeout_occurred});
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
readdata <= 0;
else if (clk_en)
readdata <= read_mux_out;
end
assign period_l_wr_strobe = chipselect && ~write_n && (address == 2);
assign period_h_wr_strobe = chipselect && ~write_n && (address == 3);
assign control_wr_strobe = chipselect && ~write_n && (address == 1);
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
control_register <= 0;
else if (control_wr_strobe)
control_register <= writedata[0];
end
assign control_interrupt_enable = control_register;
assign status_wr_strobe = chipselect && ~write_n && (address == 0);
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: AxiLite Slave Conversion
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// axilite_conv
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_axilite_conv #
(
parameter C_FAMILY = "virtex6",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_WRITE = 1,
parameter integer C_AXI_SUPPORTS_READ = 1,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_AXI_BUSER_WIDTH = 1
)
(
// System Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [3-1:0] S_AXI_AWPROT,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER, // Constant =0
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [3-1:0] S_AXI_ARPROT,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST, // Constant =1
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER, // Constant =0
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [3-1:0] M_AXI_AWPROT,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [2-1:0] M_AXI_BRESP,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [3-1:0] M_AXI_ARPROT,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY
);
wire s_awvalid_i;
wire s_arvalid_i;
wire [C_AXI_ADDR_WIDTH-1:0] m_axaddr;
// Arbiter
reg read_active;
reg write_active;
reg busy;
wire read_req;
wire write_req;
wire read_complete;
wire write_complete;
reg [1:0] areset_d; // Reset delay register
always @(posedge ACLK) begin
areset_d <= {areset_d[0], ~ARESETN};
end
assign s_awvalid_i = S_AXI_AWVALID & (C_AXI_SUPPORTS_WRITE != 0);
assign s_arvalid_i = S_AXI_ARVALID & (C_AXI_SUPPORTS_READ != 0);
assign read_req = s_arvalid_i & ~busy & ~|areset_d & ~write_active;
assign write_req = s_awvalid_i & ~busy & ~|areset_d & ((~read_active & ~s_arvalid_i) | write_active);
assign read_complete = M_AXI_RVALID & S_AXI_RREADY;
assign write_complete = M_AXI_BVALID & S_AXI_BREADY;
always @(posedge ACLK) begin : arbiter_read_ff
if (|areset_d)
read_active <= 1'b0;
else if (read_complete)
read_active <= 1'b0;
else if (read_req)
read_active <= 1'b1;
end
always @(posedge ACLK) begin : arbiter_write_ff
if (|areset_d)
write_active <= 1'b0;
else if (write_complete)
write_active <= 1'b0;
else if (write_req)
write_active <= 1'b1;
end
always @(posedge ACLK) begin : arbiter_busy_ff
if (|areset_d)
busy <= 1'b0;
else if (read_complete | write_complete)
busy <= 1'b0;
else if ((write_req & M_AXI_AWREADY) | (read_req & M_AXI_ARREADY))
busy <= 1'b1;
end
assign M_AXI_ARVALID = read_req;
assign S_AXI_ARREADY = M_AXI_ARREADY & read_req;
assign M_AXI_AWVALID = write_req;
assign S_AXI_AWREADY = M_AXI_AWREADY & write_req;
assign M_AXI_RREADY = S_AXI_RREADY & read_active;
assign S_AXI_RVALID = M_AXI_RVALID & read_active;
assign M_AXI_BREADY = S_AXI_BREADY & write_active;
assign S_AXI_BVALID = M_AXI_BVALID & write_active;
// Address multiplexer
assign m_axaddr = (read_req | (C_AXI_SUPPORTS_WRITE == 0)) ? S_AXI_ARADDR : S_AXI_AWADDR;
// Id multiplexer and flip-flop
reg [C_AXI_ID_WIDTH-1:0] s_axid;
always @(posedge ACLK) begin : axid
if (read_req) s_axid <= S_AXI_ARID;
else if (write_req) s_axid <= S_AXI_AWID;
end
assign S_AXI_BID = s_axid;
assign S_AXI_RID = s_axid;
assign M_AXI_AWADDR = m_axaddr;
assign M_AXI_ARADDR = m_axaddr;
// Feed-through signals
assign S_AXI_WREADY = M_AXI_WREADY & ~|areset_d;
assign S_AXI_BRESP = M_AXI_BRESP;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = 1'b1;
assign S_AXI_BUSER = {C_AXI_BUSER_WIDTH{1'b0}};
assign S_AXI_RUSER = {C_AXI_RUSER_WIDTH{1'b0}};
assign M_AXI_AWPROT = S_AXI_AWPROT;
assign M_AXI_WVALID = S_AXI_WVALID & ~|areset_d;
assign M_AXI_WDATA = S_AXI_WDATA;
assign M_AXI_WSTRB = S_AXI_WSTRB;
assign M_AXI_ARPROT = S_AXI_ARPROT;
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: AxiLite Slave Conversion
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// axilite_conv
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_axilite_conv #
(
parameter C_FAMILY = "virtex6",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_WRITE = 1,
parameter integer C_AXI_SUPPORTS_READ = 1,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_AXI_BUSER_WIDTH = 1
)
(
// System Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [3-1:0] S_AXI_AWPROT,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER, // Constant =0
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [3-1:0] S_AXI_ARPROT,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST, // Constant =1
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER, // Constant =0
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [3-1:0] M_AXI_AWPROT,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [2-1:0] M_AXI_BRESP,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [3-1:0] M_AXI_ARPROT,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY
);
wire s_awvalid_i;
wire s_arvalid_i;
wire [C_AXI_ADDR_WIDTH-1:0] m_axaddr;
// Arbiter
reg read_active;
reg write_active;
reg busy;
wire read_req;
wire write_req;
wire read_complete;
wire write_complete;
reg [1:0] areset_d; // Reset delay register
always @(posedge ACLK) begin
areset_d <= {areset_d[0], ~ARESETN};
end
assign s_awvalid_i = S_AXI_AWVALID & (C_AXI_SUPPORTS_WRITE != 0);
assign s_arvalid_i = S_AXI_ARVALID & (C_AXI_SUPPORTS_READ != 0);
assign read_req = s_arvalid_i & ~busy & ~|areset_d & ~write_active;
assign write_req = s_awvalid_i & ~busy & ~|areset_d & ((~read_active & ~s_arvalid_i) | write_active);
assign read_complete = M_AXI_RVALID & S_AXI_RREADY;
assign write_complete = M_AXI_BVALID & S_AXI_BREADY;
always @(posedge ACLK) begin : arbiter_read_ff
if (|areset_d)
read_active <= 1'b0;
else if (read_complete)
read_active <= 1'b0;
else if (read_req)
read_active <= 1'b1;
end
always @(posedge ACLK) begin : arbiter_write_ff
if (|areset_d)
write_active <= 1'b0;
else if (write_complete)
write_active <= 1'b0;
else if (write_req)
write_active <= 1'b1;
end
always @(posedge ACLK) begin : arbiter_busy_ff
if (|areset_d)
busy <= 1'b0;
else if (read_complete | write_complete)
busy <= 1'b0;
else if ((write_req & M_AXI_AWREADY) | (read_req & M_AXI_ARREADY))
busy <= 1'b1;
end
assign M_AXI_ARVALID = read_req;
assign S_AXI_ARREADY = M_AXI_ARREADY & read_req;
assign M_AXI_AWVALID = write_req;
assign S_AXI_AWREADY = M_AXI_AWREADY & write_req;
assign M_AXI_RREADY = S_AXI_RREADY & read_active;
assign S_AXI_RVALID = M_AXI_RVALID & read_active;
assign M_AXI_BREADY = S_AXI_BREADY & write_active;
assign S_AXI_BVALID = M_AXI_BVALID & write_active;
// Address multiplexer
assign m_axaddr = (read_req | (C_AXI_SUPPORTS_WRITE == 0)) ? S_AXI_ARADDR : S_AXI_AWADDR;
// Id multiplexer and flip-flop
reg [C_AXI_ID_WIDTH-1:0] s_axid;
always @(posedge ACLK) begin : axid
if (read_req) s_axid <= S_AXI_ARID;
else if (write_req) s_axid <= S_AXI_AWID;
end
assign S_AXI_BID = s_axid;
assign S_AXI_RID = s_axid;
assign M_AXI_AWADDR = m_axaddr;
assign M_AXI_ARADDR = m_axaddr;
// Feed-through signals
assign S_AXI_WREADY = M_AXI_WREADY & ~|areset_d;
assign S_AXI_BRESP = M_AXI_BRESP;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = 1'b1;
assign S_AXI_BUSER = {C_AXI_BUSER_WIDTH{1'b0}};
assign S_AXI_RUSER = {C_AXI_RUSER_WIDTH{1'b0}};
assign M_AXI_AWPROT = S_AXI_AWPROT;
assign M_AXI_WVALID = S_AXI_WVALID & ~|areset_d;
assign M_AXI_WDATA = S_AXI_WDATA;
assign M_AXI_WSTRB = S_AXI_WSTRB;
assign M_AXI_ARPROT = S_AXI_ARPROT;
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: AxiLite Slave Conversion
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// axilite_conv
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_axilite_conv #
(
parameter C_FAMILY = "virtex6",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_WRITE = 1,
parameter integer C_AXI_SUPPORTS_READ = 1,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_AXI_BUSER_WIDTH = 1
)
(
// System Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [3-1:0] S_AXI_AWPROT,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER, // Constant =0
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [3-1:0] S_AXI_ARPROT,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST, // Constant =1
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER, // Constant =0
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [3-1:0] M_AXI_AWPROT,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [2-1:0] M_AXI_BRESP,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [3-1:0] M_AXI_ARPROT,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY
);
wire s_awvalid_i;
wire s_arvalid_i;
wire [C_AXI_ADDR_WIDTH-1:0] m_axaddr;
// Arbiter
reg read_active;
reg write_active;
reg busy;
wire read_req;
wire write_req;
wire read_complete;
wire write_complete;
reg [1:0] areset_d; // Reset delay register
always @(posedge ACLK) begin
areset_d <= {areset_d[0], ~ARESETN};
end
assign s_awvalid_i = S_AXI_AWVALID & (C_AXI_SUPPORTS_WRITE != 0);
assign s_arvalid_i = S_AXI_ARVALID & (C_AXI_SUPPORTS_READ != 0);
assign read_req = s_arvalid_i & ~busy & ~|areset_d & ~write_active;
assign write_req = s_awvalid_i & ~busy & ~|areset_d & ((~read_active & ~s_arvalid_i) | write_active);
assign read_complete = M_AXI_RVALID & S_AXI_RREADY;
assign write_complete = M_AXI_BVALID & S_AXI_BREADY;
always @(posedge ACLK) begin : arbiter_read_ff
if (|areset_d)
read_active <= 1'b0;
else if (read_complete)
read_active <= 1'b0;
else if (read_req)
read_active <= 1'b1;
end
always @(posedge ACLK) begin : arbiter_write_ff
if (|areset_d)
write_active <= 1'b0;
else if (write_complete)
write_active <= 1'b0;
else if (write_req)
write_active <= 1'b1;
end
always @(posedge ACLK) begin : arbiter_busy_ff
if (|areset_d)
busy <= 1'b0;
else if (read_complete | write_complete)
busy <= 1'b0;
else if ((write_req & M_AXI_AWREADY) | (read_req & M_AXI_ARREADY))
busy <= 1'b1;
end
assign M_AXI_ARVALID = read_req;
assign S_AXI_ARREADY = M_AXI_ARREADY & read_req;
assign M_AXI_AWVALID = write_req;
assign S_AXI_AWREADY = M_AXI_AWREADY & write_req;
assign M_AXI_RREADY = S_AXI_RREADY & read_active;
assign S_AXI_RVALID = M_AXI_RVALID & read_active;
assign M_AXI_BREADY = S_AXI_BREADY & write_active;
assign S_AXI_BVALID = M_AXI_BVALID & write_active;
// Address multiplexer
assign m_axaddr = (read_req | (C_AXI_SUPPORTS_WRITE == 0)) ? S_AXI_ARADDR : S_AXI_AWADDR;
// Id multiplexer and flip-flop
reg [C_AXI_ID_WIDTH-1:0] s_axid;
always @(posedge ACLK) begin : axid
if (read_req) s_axid <= S_AXI_ARID;
else if (write_req) s_axid <= S_AXI_AWID;
end
assign S_AXI_BID = s_axid;
assign S_AXI_RID = s_axid;
assign M_AXI_AWADDR = m_axaddr;
assign M_AXI_ARADDR = m_axaddr;
// Feed-through signals
assign S_AXI_WREADY = M_AXI_WREADY & ~|areset_d;
assign S_AXI_BRESP = M_AXI_BRESP;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = 1'b1;
assign S_AXI_BUSER = {C_AXI_BUSER_WIDTH{1'b0}};
assign S_AXI_RUSER = {C_AXI_RUSER_WIDTH{1'b0}};
assign M_AXI_AWPROT = S_AXI_AWPROT;
assign M_AXI_WVALID = S_AXI_WVALID & ~|areset_d;
assign M_AXI_WDATA = S_AXI_WDATA;
assign M_AXI_WSTRB = S_AXI_WSTRB;
assign M_AXI_ARPROT = S_AXI_ARPROT;
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: AxiLite Slave Conversion
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// axilite_conv
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_axilite_conv #
(
parameter C_FAMILY = "virtex6",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_WRITE = 1,
parameter integer C_AXI_SUPPORTS_READ = 1,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_AXI_BUSER_WIDTH = 1
)
(
// System Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [3-1:0] S_AXI_AWPROT,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER, // Constant =0
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [3-1:0] S_AXI_ARPROT,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST, // Constant =1
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER, // Constant =0
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [3-1:0] M_AXI_AWPROT,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [2-1:0] M_AXI_BRESP,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [3-1:0] M_AXI_ARPROT,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY
);
wire s_awvalid_i;
wire s_arvalid_i;
wire [C_AXI_ADDR_WIDTH-1:0] m_axaddr;
// Arbiter
reg read_active;
reg write_active;
reg busy;
wire read_req;
wire write_req;
wire read_complete;
wire write_complete;
reg [1:0] areset_d; // Reset delay register
always @(posedge ACLK) begin
areset_d <= {areset_d[0], ~ARESETN};
end
assign s_awvalid_i = S_AXI_AWVALID & (C_AXI_SUPPORTS_WRITE != 0);
assign s_arvalid_i = S_AXI_ARVALID & (C_AXI_SUPPORTS_READ != 0);
assign read_req = s_arvalid_i & ~busy & ~|areset_d & ~write_active;
assign write_req = s_awvalid_i & ~busy & ~|areset_d & ((~read_active & ~s_arvalid_i) | write_active);
assign read_complete = M_AXI_RVALID & S_AXI_RREADY;
assign write_complete = M_AXI_BVALID & S_AXI_BREADY;
always @(posedge ACLK) begin : arbiter_read_ff
if (|areset_d)
read_active <= 1'b0;
else if (read_complete)
read_active <= 1'b0;
else if (read_req)
read_active <= 1'b1;
end
always @(posedge ACLK) begin : arbiter_write_ff
if (|areset_d)
write_active <= 1'b0;
else if (write_complete)
write_active <= 1'b0;
else if (write_req)
write_active <= 1'b1;
end
always @(posedge ACLK) begin : arbiter_busy_ff
if (|areset_d)
busy <= 1'b0;
else if (read_complete | write_complete)
busy <= 1'b0;
else if ((write_req & M_AXI_AWREADY) | (read_req & M_AXI_ARREADY))
busy <= 1'b1;
end
assign M_AXI_ARVALID = read_req;
assign S_AXI_ARREADY = M_AXI_ARREADY & read_req;
assign M_AXI_AWVALID = write_req;
assign S_AXI_AWREADY = M_AXI_AWREADY & write_req;
assign M_AXI_RREADY = S_AXI_RREADY & read_active;
assign S_AXI_RVALID = M_AXI_RVALID & read_active;
assign M_AXI_BREADY = S_AXI_BREADY & write_active;
assign S_AXI_BVALID = M_AXI_BVALID & write_active;
// Address multiplexer
assign m_axaddr = (read_req | (C_AXI_SUPPORTS_WRITE == 0)) ? S_AXI_ARADDR : S_AXI_AWADDR;
// Id multiplexer and flip-flop
reg [C_AXI_ID_WIDTH-1:0] s_axid;
always @(posedge ACLK) begin : axid
if (read_req) s_axid <= S_AXI_ARID;
else if (write_req) s_axid <= S_AXI_AWID;
end
assign S_AXI_BID = s_axid;
assign S_AXI_RID = s_axid;
assign M_AXI_AWADDR = m_axaddr;
assign M_AXI_ARADDR = m_axaddr;
// Feed-through signals
assign S_AXI_WREADY = M_AXI_WREADY & ~|areset_d;
assign S_AXI_BRESP = M_AXI_BRESP;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = 1'b1;
assign S_AXI_BUSER = {C_AXI_BUSER_WIDTH{1'b0}};
assign S_AXI_RUSER = {C_AXI_RUSER_WIDTH{1'b0}};
assign M_AXI_AWPROT = S_AXI_AWPROT;
assign M_AXI_WVALID = S_AXI_WVALID & ~|areset_d;
assign M_AXI_WDATA = S_AXI_WDATA;
assign M_AXI_WSTRB = S_AXI_WSTRB;
assign M_AXI_ARPROT = S_AXI_ARPROT;
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: AxiLite Slave Conversion
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// axilite_conv
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_axilite_conv #
(
parameter C_FAMILY = "virtex6",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_WRITE = 1,
parameter integer C_AXI_SUPPORTS_READ = 1,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_AXI_BUSER_WIDTH = 1
)
(
// System Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [3-1:0] S_AXI_AWPROT,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER, // Constant =0
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [3-1:0] S_AXI_ARPROT,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST, // Constant =1
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER, // Constant =0
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [3-1:0] M_AXI_AWPROT,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [2-1:0] M_AXI_BRESP,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [3-1:0] M_AXI_ARPROT,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY
);
wire s_awvalid_i;
wire s_arvalid_i;
wire [C_AXI_ADDR_WIDTH-1:0] m_axaddr;
// Arbiter
reg read_active;
reg write_active;
reg busy;
wire read_req;
wire write_req;
wire read_complete;
wire write_complete;
reg [1:0] areset_d; // Reset delay register
always @(posedge ACLK) begin
areset_d <= {areset_d[0], ~ARESETN};
end
assign s_awvalid_i = S_AXI_AWVALID & (C_AXI_SUPPORTS_WRITE != 0);
assign s_arvalid_i = S_AXI_ARVALID & (C_AXI_SUPPORTS_READ != 0);
assign read_req = s_arvalid_i & ~busy & ~|areset_d & ~write_active;
assign write_req = s_awvalid_i & ~busy & ~|areset_d & ((~read_active & ~s_arvalid_i) | write_active);
assign read_complete = M_AXI_RVALID & S_AXI_RREADY;
assign write_complete = M_AXI_BVALID & S_AXI_BREADY;
always @(posedge ACLK) begin : arbiter_read_ff
if (|areset_d)
read_active <= 1'b0;
else if (read_complete)
read_active <= 1'b0;
else if (read_req)
read_active <= 1'b1;
end
always @(posedge ACLK) begin : arbiter_write_ff
if (|areset_d)
write_active <= 1'b0;
else if (write_complete)
write_active <= 1'b0;
else if (write_req)
write_active <= 1'b1;
end
always @(posedge ACLK) begin : arbiter_busy_ff
if (|areset_d)
busy <= 1'b0;
else if (read_complete | write_complete)
busy <= 1'b0;
else if ((write_req & M_AXI_AWREADY) | (read_req & M_AXI_ARREADY))
busy <= 1'b1;
end
assign M_AXI_ARVALID = read_req;
assign S_AXI_ARREADY = M_AXI_ARREADY & read_req;
assign M_AXI_AWVALID = write_req;
assign S_AXI_AWREADY = M_AXI_AWREADY & write_req;
assign M_AXI_RREADY = S_AXI_RREADY & read_active;
assign S_AXI_RVALID = M_AXI_RVALID & read_active;
assign M_AXI_BREADY = S_AXI_BREADY & write_active;
assign S_AXI_BVALID = M_AXI_BVALID & write_active;
// Address multiplexer
assign m_axaddr = (read_req | (C_AXI_SUPPORTS_WRITE == 0)) ? S_AXI_ARADDR : S_AXI_AWADDR;
// Id multiplexer and flip-flop
reg [C_AXI_ID_WIDTH-1:0] s_axid;
always @(posedge ACLK) begin : axid
if (read_req) s_axid <= S_AXI_ARID;
else if (write_req) s_axid <= S_AXI_AWID;
end
assign S_AXI_BID = s_axid;
assign S_AXI_RID = s_axid;
assign M_AXI_AWADDR = m_axaddr;
assign M_AXI_ARADDR = m_axaddr;
// Feed-through signals
assign S_AXI_WREADY = M_AXI_WREADY & ~|areset_d;
assign S_AXI_BRESP = M_AXI_BRESP;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = 1'b1;
assign S_AXI_BUSER = {C_AXI_BUSER_WIDTH{1'b0}};
assign S_AXI_RUSER = {C_AXI_RUSER_WIDTH{1'b0}};
assign M_AXI_AWPROT = S_AXI_AWPROT;
assign M_AXI_WVALID = S_AXI_WVALID & ~|areset_d;
assign M_AXI_WDATA = S_AXI_WDATA;
assign M_AXI_WSTRB = S_AXI_WSTRB;
assign M_AXI_ARPROT = S_AXI_ARPROT;
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: AxiLite Slave Conversion
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// axilite_conv
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_axilite_conv #
(
parameter C_FAMILY = "virtex6",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_WRITE = 1,
parameter integer C_AXI_SUPPORTS_READ = 1,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_AXI_BUSER_WIDTH = 1
)
(
// System Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [3-1:0] S_AXI_AWPROT,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER, // Constant =0
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [3-1:0] S_AXI_ARPROT,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST, // Constant =1
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER, // Constant =0
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [3-1:0] M_AXI_AWPROT,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [2-1:0] M_AXI_BRESP,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [3-1:0] M_AXI_ARPROT,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY
);
wire s_awvalid_i;
wire s_arvalid_i;
wire [C_AXI_ADDR_WIDTH-1:0] m_axaddr;
// Arbiter
reg read_active;
reg write_active;
reg busy;
wire read_req;
wire write_req;
wire read_complete;
wire write_complete;
reg [1:0] areset_d; // Reset delay register
always @(posedge ACLK) begin
areset_d <= {areset_d[0], ~ARESETN};
end
assign s_awvalid_i = S_AXI_AWVALID & (C_AXI_SUPPORTS_WRITE != 0);
assign s_arvalid_i = S_AXI_ARVALID & (C_AXI_SUPPORTS_READ != 0);
assign read_req = s_arvalid_i & ~busy & ~|areset_d & ~write_active;
assign write_req = s_awvalid_i & ~busy & ~|areset_d & ((~read_active & ~s_arvalid_i) | write_active);
assign read_complete = M_AXI_RVALID & S_AXI_RREADY;
assign write_complete = M_AXI_BVALID & S_AXI_BREADY;
always @(posedge ACLK) begin : arbiter_read_ff
if (|areset_d)
read_active <= 1'b0;
else if (read_complete)
read_active <= 1'b0;
else if (read_req)
read_active <= 1'b1;
end
always @(posedge ACLK) begin : arbiter_write_ff
if (|areset_d)
write_active <= 1'b0;
else if (write_complete)
write_active <= 1'b0;
else if (write_req)
write_active <= 1'b1;
end
always @(posedge ACLK) begin : arbiter_busy_ff
if (|areset_d)
busy <= 1'b0;
else if (read_complete | write_complete)
busy <= 1'b0;
else if ((write_req & M_AXI_AWREADY) | (read_req & M_AXI_ARREADY))
busy <= 1'b1;
end
assign M_AXI_ARVALID = read_req;
assign S_AXI_ARREADY = M_AXI_ARREADY & read_req;
assign M_AXI_AWVALID = write_req;
assign S_AXI_AWREADY = M_AXI_AWREADY & write_req;
assign M_AXI_RREADY = S_AXI_RREADY & read_active;
assign S_AXI_RVALID = M_AXI_RVALID & read_active;
assign M_AXI_BREADY = S_AXI_BREADY & write_active;
assign S_AXI_BVALID = M_AXI_BVALID & write_active;
// Address multiplexer
assign m_axaddr = (read_req | (C_AXI_SUPPORTS_WRITE == 0)) ? S_AXI_ARADDR : S_AXI_AWADDR;
// Id multiplexer and flip-flop
reg [C_AXI_ID_WIDTH-1:0] s_axid;
always @(posedge ACLK) begin : axid
if (read_req) s_axid <= S_AXI_ARID;
else if (write_req) s_axid <= S_AXI_AWID;
end
assign S_AXI_BID = s_axid;
assign S_AXI_RID = s_axid;
assign M_AXI_AWADDR = m_axaddr;
assign M_AXI_ARADDR = m_axaddr;
// Feed-through signals
assign S_AXI_WREADY = M_AXI_WREADY & ~|areset_d;
assign S_AXI_BRESP = M_AXI_BRESP;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = 1'b1;
assign S_AXI_BUSER = {C_AXI_BUSER_WIDTH{1'b0}};
assign S_AXI_RUSER = {C_AXI_RUSER_WIDTH{1'b0}};
assign M_AXI_AWPROT = S_AXI_AWPROT;
assign M_AXI_WVALID = S_AXI_WVALID & ~|areset_d;
assign M_AXI_WDATA = S_AXI_WDATA;
assign M_AXI_WSTRB = S_AXI_WSTRB;
assign M_AXI_ARPROT = S_AXI_ARPROT;
endmodule
|
// This is a component of pluto_step, a hardware step waveform generator
// Copyright 2007 Jeff Epler <[email protected]>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
module stepgen(clk, enable, position, velocity, dirtime, steptime, step, dir, tap);
`define STATE_STEP 0
`define STATE_DIRCHANGE 1
`define STATE_DIRWAIT 2
parameter W=12;
parameter F=10;
parameter T=5;
input clk, enable;
output [W+F-1:0] position; reg [W+F-1:0] position;
input [F:0] velocity;
input [T-1:0] dirtime, steptime;
input [1:0] tap;
output step, dir;
reg step, dir;
reg [T-1:0] timer;
reg [1:0] state;
reg ones;
wire dbit = velocity[F];
wire pbit = (tap == 0 ? position[F]
: (tap == 1 ? position[F+1]
: (tap == 2 ? position[F+2]
: position[F+3])));
wire [W+F-1:0] xvelocity = {{W{velocity[F]}}, {1{velocity[F-1:0]}}};
`ifdef TESTING
// for testing:
initial position = 1'b0;
initial state = `STATE_STEP;
initial timer = 0;
initial dir = 0;
initial ones = 0;
`endif
always @(posedge clk) begin
if(enable) begin
// $display("state=%d timer=%d position=%h velocity=%h dir=%d dbit=%d pbit=%d ones=%d", state, timer, position, xvelocity, dir, dbit, pbit, ones);
if((dir != dbit) && (pbit == ones)) begin
if(state == `STATE_DIRCHANGE) begin
if(timer == 0) begin
dir <= dbit;
timer <= dirtime;
state <= `STATE_DIRWAIT;
end else begin
timer <= timer - 1'd1;
end
end else begin
if(timer == 0) begin
step <= 0;
timer <= dirtime;
state <= `STATE_DIRCHANGE;
end else begin
timer <= timer - 1'd1;
end
end
end else if(state == `STATE_DIRWAIT) begin
if(timer == 0) begin
state <= `STATE_STEP;
end else begin
timer <= timer - 1'd1;
end
end else begin
if(timer == 0) begin
if(pbit != ones) begin
ones <= pbit;
step <= 1'd1;
timer <= steptime;
end else begin
step <= 0;
end
end else begin
timer <= timer - 1'd1;
end
if(dir == dbit)
position <= position + xvelocity;
end
end
end
endmodule
|
// This is a component of pluto_step, a hardware step waveform generator
// Copyright 2007 Jeff Epler <[email protected]>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
module stepgen(clk, enable, position, velocity, dirtime, steptime, step, dir, tap);
`define STATE_STEP 0
`define STATE_DIRCHANGE 1
`define STATE_DIRWAIT 2
parameter W=12;
parameter F=10;
parameter T=5;
input clk, enable;
output [W+F-1:0] position; reg [W+F-1:0] position;
input [F:0] velocity;
input [T-1:0] dirtime, steptime;
input [1:0] tap;
output step, dir;
reg step, dir;
reg [T-1:0] timer;
reg [1:0] state;
reg ones;
wire dbit = velocity[F];
wire pbit = (tap == 0 ? position[F]
: (tap == 1 ? position[F+1]
: (tap == 2 ? position[F+2]
: position[F+3])));
wire [W+F-1:0] xvelocity = {{W{velocity[F]}}, {1{velocity[F-1:0]}}};
`ifdef TESTING
// for testing:
initial position = 1'b0;
initial state = `STATE_STEP;
initial timer = 0;
initial dir = 0;
initial ones = 0;
`endif
always @(posedge clk) begin
if(enable) begin
// $display("state=%d timer=%d position=%h velocity=%h dir=%d dbit=%d pbit=%d ones=%d", state, timer, position, xvelocity, dir, dbit, pbit, ones);
if((dir != dbit) && (pbit == ones)) begin
if(state == `STATE_DIRCHANGE) begin
if(timer == 0) begin
dir <= dbit;
timer <= dirtime;
state <= `STATE_DIRWAIT;
end else begin
timer <= timer - 1'd1;
end
end else begin
if(timer == 0) begin
step <= 0;
timer <= dirtime;
state <= `STATE_DIRCHANGE;
end else begin
timer <= timer - 1'd1;
end
end
end else if(state == `STATE_DIRWAIT) begin
if(timer == 0) begin
state <= `STATE_STEP;
end else begin
timer <= timer - 1'd1;
end
end else begin
if(timer == 0) begin
if(pbit != ones) begin
ones <= pbit;
step <= 1'd1;
timer <= steptime;
end else begin
step <= 0;
end
end else begin
timer <= timer - 1'd1;
end
if(dir == dbit)
position <= position + xvelocity;
end
end
end
endmodule
|
/*
* Copyright (c) 2009 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module hex_display (
input [15:0] num,
input en,
output [6:0] hex0,
output [6:0] hex1,
output [6:0] hex2,
output [6:0] hex3
);
// Module instantiations
seg_7 hex_group0 (
.num (num[3:0]),
.en (en),
.seg (hex0)
);
seg_7 hex_group1 (
.num (num[7:4]),
.en (en),
.seg (hex1)
);
seg_7 hex_group2 (
.num (num[11:8]),
.en (en),
.seg (hex2)
);
seg_7 hex_group3 (
.num (num[15:12]),
.en (en),
.seg (hex3)
);
endmodule
|
/*
* Copyright (c) 2009 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module hex_display (
input [15:0] num,
input en,
output [6:0] hex0,
output [6:0] hex1,
output [6:0] hex2,
output [6:0] hex3
);
// Module instantiations
seg_7 hex_group0 (
.num (num[3:0]),
.en (en),
.seg (hex0)
);
seg_7 hex_group1 (
.num (num[7:4]),
.en (en),
.seg (hex1)
);
seg_7 hex_group2 (
.num (num[11:8]),
.en (en),
.seg (hex2)
);
seg_7 hex_group3 (
.num (num[15:12]),
.en (en),
.seg (hex3)
);
endmodule
|
/*
* Copyright (c) 2009 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module hex_display (
input [15:0] num,
input en,
output [6:0] hex0,
output [6:0] hex1,
output [6:0] hex2,
output [6:0] hex3
);
// Module instantiations
seg_7 hex_group0 (
.num (num[3:0]),
.en (en),
.seg (hex0)
);
seg_7 hex_group1 (
.num (num[7:4]),
.en (en),
.seg (hex1)
);
seg_7 hex_group2 (
.num (num[11:8]),
.en (en),
.seg (hex2)
);
seg_7 hex_group3 (
.num (num[15:12]),
.en (en),
.seg (hex3)
);
endmodule
|
/*
* Copyright (c) 2009 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module hex_display (
input [15:0] num,
input en,
output [6:0] hex0,
output [6:0] hex1,
output [6:0] hex2,
output [6:0] hex3
);
// Module instantiations
seg_7 hex_group0 (
.num (num[3:0]),
.en (en),
.seg (hex0)
);
seg_7 hex_group1 (
.num (num[7:4]),
.en (en),
.seg (hex1)
);
seg_7 hex_group2 (
.num (num[11:8]),
.en (en),
.seg (hex2)
);
seg_7 hex_group3 (
.num (num[15:12]),
.en (en),
.seg (hex3)
);
endmodule
|
/*
* Copyright (c) 2009 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module hex_display (
input [15:0] num,
input en,
output [6:0] hex0,
output [6:0] hex1,
output [6:0] hex2,
output [6:0] hex3
);
// Module instantiations
seg_7 hex_group0 (
.num (num[3:0]),
.en (en),
.seg (hex0)
);
seg_7 hex_group1 (
.num (num[7:4]),
.en (en),
.seg (hex1)
);
seg_7 hex_group2 (
.num (num[11:8]),
.en (en),
.seg (hex2)
);
seg_7 hex_group3 (
.num (num[15:12]),
.en (en),
.seg (hex3)
);
endmodule
|
/*
* Copyright (c) 2009 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module hex_display (
input [15:0] num,
input en,
output [6:0] hex0,
output [6:0] hex1,
output [6:0] hex2,
output [6:0] hex3
);
// Module instantiations
seg_7 hex_group0 (
.num (num[3:0]),
.en (en),
.seg (hex0)
);
seg_7 hex_group1 (
.num (num[7:4]),
.en (en),
.seg (hex1)
);
seg_7 hex_group2 (
.num (num[11:8]),
.en (en),
.seg (hex2)
);
seg_7 hex_group3 (
.num (num[15:12]),
.en (en),
.seg (hex3)
);
endmodule
|
/*
* Copyright (c) 2009 Zeus Gomez Marmolejo <[email protected]>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module hex_display (
input [15:0] num,
input en,
output [6:0] hex0,
output [6:0] hex1,
output [6:0] hex2,
output [6:0] hex3
);
// Module instantiations
seg_7 hex_group0 (
.num (num[3:0]),
.en (en),
.seg (hex0)
);
seg_7 hex_group1 (
.num (num[7:4]),
.en (en),
.seg (hex1)
);
seg_7 hex_group2 (
.num (num[11:8]),
.en (en),
.seg (hex2)
);
seg_7 hex_group3 (
.num (num[15:12]),
.en (en),
.seg (hex3)
);
endmodule
|
// (c) Copyright 2012-2013 Xilinx, Inc. All rights reserved.
//
// This file contains confidential and proprietary information
// of Xilinx, Inc. and is protected under U.S. and
// international copyright and other intellectual property
// laws.
//
// DISCLAIMER
// This disclaimer is not a license and does not grant any
// rights to the materials distributed herewith. Except as
// otherwise provided in a valid license issued to you by
// Xilinx, and to the maximum extent permitted by applicable
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// (2) Xilinx shall not be liable (whether in contract or tort,
// including negligence, or under any other theory of
// liability) for any loss or damage of any kind or nature
// related to, arising under or in connection with these
// materials, including for any direct, or any indirect,
// special, incidental, or consequential loss or damage
// (including loss of data, profits, goodwill, or any type of
// loss or damage suffered as a result of any action brought
// by a third party) even if such damage or loss was
// reasonably foreseeable or Xilinx had been advised of the
// possibility of the same.
//
// CRITICAL APPLICATIONS
// Xilinx products are not designed or intended to be fail-
// safe, or for use in any application requiring fail-safe
// performance, such as life-support or safety devices or
// systems, Class III medical devices, nuclear facilities,
// applications related to the deployment of airbags, or any
// other applications that could lead to death, personal
// injury, or severe property or environmental damage
// (individually and collectively, "Critical
// Applications"). Customer assumes the sole risk and
// liability of any use of Xilinx products in Critical
// Applications, subject only to applicable laws and
// regulations governing limitations on product liability.
//
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
// Description: SRL based FIFO for AXIS/AXI Channels.
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_infrastructure_v1_1_axic_srl_fifo #(
///////////////////////////////////////////////////////////////////////////////
// Parameter Definitions
///////////////////////////////////////////////////////////////////////////////
parameter C_FAMILY = "virtex7",
parameter integer C_PAYLOAD_WIDTH = 1,
parameter integer C_FIFO_DEPTH = 16 // Range: 4-16.
)
(
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire aclk, // Clock
input wire aresetn, // Reset
input wire [C_PAYLOAD_WIDTH-1:0] s_payload, // Input data
input wire s_valid, // Input data valid
output reg s_ready, // Input data ready
output wire [C_PAYLOAD_WIDTH-1:0] m_payload, // Output data
output reg m_valid, // Output data valid
input wire m_ready // Output data ready
);
////////////////////////////////////////////////////////////////////////////////
// Functions
////////////////////////////////////////////////////////////////////////////////
// ceiling logb2
function integer f_clogb2 (input integer size);
integer s;
begin
s = size;
s = s - 1;
for (f_clogb2=1; s>1; f_clogb2=f_clogb2+1)
s = s >> 1;
end
endfunction // clogb2
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
localparam integer LP_LOG_FIFO_DEPTH = f_clogb2(C_FIFO_DEPTH);
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [LP_LOG_FIFO_DEPTH-1:0] fifo_index;
wire [4-1:0] fifo_addr;
wire push;
wire pop ;
reg areset_r1;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
////////////////////////////////////////////////////////////////////////////////
always @(posedge aclk) begin
areset_r1 <= ~aresetn;
end
always @(posedge aclk) begin
if (~aresetn) begin
fifo_index <= {LP_LOG_FIFO_DEPTH{1'b1}};
end
else begin
fifo_index <= push & ~pop ? fifo_index + 1'b1 :
~push & pop ? fifo_index - 1'b1 :
fifo_index;
end
end
assign push = s_valid & s_ready;
always @(posedge aclk) begin
if (~aresetn) begin
s_ready <= 1'b0;
end
else begin
s_ready <= areset_r1 ? 1'b1 :
push & ~pop && (fifo_index == (C_FIFO_DEPTH - 2'd2)) ? 1'b0 :
~push & pop ? 1'b1 :
s_ready;
end
end
assign pop = m_valid & m_ready;
always @(posedge aclk) begin
if (~aresetn) begin
m_valid <= 1'b0;
end
else begin
m_valid <= ~push & pop && (fifo_index == {LP_LOG_FIFO_DEPTH{1'b0}}) ? 1'b0 :
push & ~pop ? 1'b1 :
m_valid;
end
end
generate
if (LP_LOG_FIFO_DEPTH < 4) begin : gen_pad_fifo_addr
assign fifo_addr[0+:LP_LOG_FIFO_DEPTH] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
assign fifo_addr[LP_LOG_FIFO_DEPTH+:(4-LP_LOG_FIFO_DEPTH)] = {4-LP_LOG_FIFO_DEPTH{1'b0}};
end
else begin : gen_fifo_addr
assign fifo_addr[LP_LOG_FIFO_DEPTH-1:0] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
end
endgenerate
generate
genvar i;
for (i = 0; i < C_PAYLOAD_WIDTH; i = i + 1) begin : gen_data_bit
SRL16E
u_srl_fifo(
.Q ( m_payload[i] ) ,
.A0 ( fifo_addr[0] ) ,
.A1 ( fifo_addr[1] ) ,
.A2 ( fifo_addr[2] ) ,
.A3 ( fifo_addr[3] ) ,
.CE ( push ) ,
.CLK ( aclk ) ,
.D ( s_payload[i] )
);
end
endgenerate
endmodule
`default_nettype wire
|
// (c) Copyright 2012-2013 Xilinx, Inc. All rights reserved.
//
// This file contains confidential and proprietary information
// of Xilinx, Inc. and is protected under U.S. and
// international copyright and other intellectual property
// laws.
//
// DISCLAIMER
// This disclaimer is not a license and does not grant any
// rights to the materials distributed herewith. Except as
// otherwise provided in a valid license issued to you by
// Xilinx, and to the maximum extent permitted by applicable
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// (2) Xilinx shall not be liable (whether in contract or tort,
// including negligence, or under any other theory of
// liability) for any loss or damage of any kind or nature
// related to, arising under or in connection with these
// materials, including for any direct, or any indirect,
// special, incidental, or consequential loss or damage
// (including loss of data, profits, goodwill, or any type of
// loss or damage suffered as a result of any action brought
// by a third party) even if such damage or loss was
// reasonably foreseeable or Xilinx had been advised of the
// possibility of the same.
//
// CRITICAL APPLICATIONS
// Xilinx products are not designed or intended to be fail-
// safe, or for use in any application requiring fail-safe
// performance, such as life-support or safety devices or
// systems, Class III medical devices, nuclear facilities,
// applications related to the deployment of airbags, or any
// other applications that could lead to death, personal
// injury, or severe property or environmental damage
// (individually and collectively, "Critical
// Applications"). Customer assumes the sole risk and
// liability of any use of Xilinx products in Critical
// Applications, subject only to applicable laws and
// regulations governing limitations on product liability.
//
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
// Description: SRL based FIFO for AXIS/AXI Channels.
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_infrastructure_v1_1_axic_srl_fifo #(
///////////////////////////////////////////////////////////////////////////////
// Parameter Definitions
///////////////////////////////////////////////////////////////////////////////
parameter C_FAMILY = "virtex7",
parameter integer C_PAYLOAD_WIDTH = 1,
parameter integer C_FIFO_DEPTH = 16 // Range: 4-16.
)
(
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire aclk, // Clock
input wire aresetn, // Reset
input wire [C_PAYLOAD_WIDTH-1:0] s_payload, // Input data
input wire s_valid, // Input data valid
output reg s_ready, // Input data ready
output wire [C_PAYLOAD_WIDTH-1:0] m_payload, // Output data
output reg m_valid, // Output data valid
input wire m_ready // Output data ready
);
////////////////////////////////////////////////////////////////////////////////
// Functions
////////////////////////////////////////////////////////////////////////////////
// ceiling logb2
function integer f_clogb2 (input integer size);
integer s;
begin
s = size;
s = s - 1;
for (f_clogb2=1; s>1; f_clogb2=f_clogb2+1)
s = s >> 1;
end
endfunction // clogb2
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
localparam integer LP_LOG_FIFO_DEPTH = f_clogb2(C_FIFO_DEPTH);
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [LP_LOG_FIFO_DEPTH-1:0] fifo_index;
wire [4-1:0] fifo_addr;
wire push;
wire pop ;
reg areset_r1;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
////////////////////////////////////////////////////////////////////////////////
always @(posedge aclk) begin
areset_r1 <= ~aresetn;
end
always @(posedge aclk) begin
if (~aresetn) begin
fifo_index <= {LP_LOG_FIFO_DEPTH{1'b1}};
end
else begin
fifo_index <= push & ~pop ? fifo_index + 1'b1 :
~push & pop ? fifo_index - 1'b1 :
fifo_index;
end
end
assign push = s_valid & s_ready;
always @(posedge aclk) begin
if (~aresetn) begin
s_ready <= 1'b0;
end
else begin
s_ready <= areset_r1 ? 1'b1 :
push & ~pop && (fifo_index == (C_FIFO_DEPTH - 2'd2)) ? 1'b0 :
~push & pop ? 1'b1 :
s_ready;
end
end
assign pop = m_valid & m_ready;
always @(posedge aclk) begin
if (~aresetn) begin
m_valid <= 1'b0;
end
else begin
m_valid <= ~push & pop && (fifo_index == {LP_LOG_FIFO_DEPTH{1'b0}}) ? 1'b0 :
push & ~pop ? 1'b1 :
m_valid;
end
end
generate
if (LP_LOG_FIFO_DEPTH < 4) begin : gen_pad_fifo_addr
assign fifo_addr[0+:LP_LOG_FIFO_DEPTH] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
assign fifo_addr[LP_LOG_FIFO_DEPTH+:(4-LP_LOG_FIFO_DEPTH)] = {4-LP_LOG_FIFO_DEPTH{1'b0}};
end
else begin : gen_fifo_addr
assign fifo_addr[LP_LOG_FIFO_DEPTH-1:0] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
end
endgenerate
generate
genvar i;
for (i = 0; i < C_PAYLOAD_WIDTH; i = i + 1) begin : gen_data_bit
SRL16E
u_srl_fifo(
.Q ( m_payload[i] ) ,
.A0 ( fifo_addr[0] ) ,
.A1 ( fifo_addr[1] ) ,
.A2 ( fifo_addr[2] ) ,
.A3 ( fifo_addr[3] ) ,
.CE ( push ) ,
.CLK ( aclk ) ,
.D ( s_payload[i] )
);
end
endgenerate
endmodule
`default_nettype wire
|
// (c) Copyright 2012-2013 Xilinx, Inc. All rights reserved.
//
// This file contains confidential and proprietary information
// of Xilinx, Inc. and is protected under U.S. and
// international copyright and other intellectual property
// laws.
//
// DISCLAIMER
// This disclaimer is not a license and does not grant any
// rights to the materials distributed herewith. Except as
// otherwise provided in a valid license issued to you by
// Xilinx, and to the maximum extent permitted by applicable
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// (2) Xilinx shall not be liable (whether in contract or tort,
// including negligence, or under any other theory of
// liability) for any loss or damage of any kind or nature
// related to, arising under or in connection with these
// materials, including for any direct, or any indirect,
// special, incidental, or consequential loss or damage
// (including loss of data, profits, goodwill, or any type of
// loss or damage suffered as a result of any action brought
// by a third party) even if such damage or loss was
// reasonably foreseeable or Xilinx had been advised of the
// possibility of the same.
//
// CRITICAL APPLICATIONS
// Xilinx products are not designed or intended to be fail-
// safe, or for use in any application requiring fail-safe
// performance, such as life-support or safety devices or
// systems, Class III medical devices, nuclear facilities,
// applications related to the deployment of airbags, or any
// other applications that could lead to death, personal
// injury, or severe property or environmental damage
// (individually and collectively, "Critical
// Applications"). Customer assumes the sole risk and
// liability of any use of Xilinx products in Critical
// Applications, subject only to applicable laws and
// regulations governing limitations on product liability.
//
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
// Description: SRL based FIFO for AXIS/AXI Channels.
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_infrastructure_v1_1_axic_srl_fifo #(
///////////////////////////////////////////////////////////////////////////////
// Parameter Definitions
///////////////////////////////////////////////////////////////////////////////
parameter C_FAMILY = "virtex7",
parameter integer C_PAYLOAD_WIDTH = 1,
parameter integer C_FIFO_DEPTH = 16 // Range: 4-16.
)
(
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire aclk, // Clock
input wire aresetn, // Reset
input wire [C_PAYLOAD_WIDTH-1:0] s_payload, // Input data
input wire s_valid, // Input data valid
output reg s_ready, // Input data ready
output wire [C_PAYLOAD_WIDTH-1:0] m_payload, // Output data
output reg m_valid, // Output data valid
input wire m_ready // Output data ready
);
////////////////////////////////////////////////////////////////////////////////
// Functions
////////////////////////////////////////////////////////////////////////////////
// ceiling logb2
function integer f_clogb2 (input integer size);
integer s;
begin
s = size;
s = s - 1;
for (f_clogb2=1; s>1; f_clogb2=f_clogb2+1)
s = s >> 1;
end
endfunction // clogb2
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
localparam integer LP_LOG_FIFO_DEPTH = f_clogb2(C_FIFO_DEPTH);
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [LP_LOG_FIFO_DEPTH-1:0] fifo_index;
wire [4-1:0] fifo_addr;
wire push;
wire pop ;
reg areset_r1;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
////////////////////////////////////////////////////////////////////////////////
always @(posedge aclk) begin
areset_r1 <= ~aresetn;
end
always @(posedge aclk) begin
if (~aresetn) begin
fifo_index <= {LP_LOG_FIFO_DEPTH{1'b1}};
end
else begin
fifo_index <= push & ~pop ? fifo_index + 1'b1 :
~push & pop ? fifo_index - 1'b1 :
fifo_index;
end
end
assign push = s_valid & s_ready;
always @(posedge aclk) begin
if (~aresetn) begin
s_ready <= 1'b0;
end
else begin
s_ready <= areset_r1 ? 1'b1 :
push & ~pop && (fifo_index == (C_FIFO_DEPTH - 2'd2)) ? 1'b0 :
~push & pop ? 1'b1 :
s_ready;
end
end
assign pop = m_valid & m_ready;
always @(posedge aclk) begin
if (~aresetn) begin
m_valid <= 1'b0;
end
else begin
m_valid <= ~push & pop && (fifo_index == {LP_LOG_FIFO_DEPTH{1'b0}}) ? 1'b0 :
push & ~pop ? 1'b1 :
m_valid;
end
end
generate
if (LP_LOG_FIFO_DEPTH < 4) begin : gen_pad_fifo_addr
assign fifo_addr[0+:LP_LOG_FIFO_DEPTH] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
assign fifo_addr[LP_LOG_FIFO_DEPTH+:(4-LP_LOG_FIFO_DEPTH)] = {4-LP_LOG_FIFO_DEPTH{1'b0}};
end
else begin : gen_fifo_addr
assign fifo_addr[LP_LOG_FIFO_DEPTH-1:0] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
end
endgenerate
generate
genvar i;
for (i = 0; i < C_PAYLOAD_WIDTH; i = i + 1) begin : gen_data_bit
SRL16E
u_srl_fifo(
.Q ( m_payload[i] ) ,
.A0 ( fifo_addr[0] ) ,
.A1 ( fifo_addr[1] ) ,
.A2 ( fifo_addr[2] ) ,
.A3 ( fifo_addr[3] ) ,
.CE ( push ) ,
.CLK ( aclk ) ,
.D ( s_payload[i] )
);
end
endgenerate
endmodule
`default_nettype wire
|
// (c) Copyright 2012-2013 Xilinx, Inc. All rights reserved.
//
// This file contains confidential and proprietary information
// of Xilinx, Inc. and is protected under U.S. and
// international copyright and other intellectual property
// laws.
//
// DISCLAIMER
// This disclaimer is not a license and does not grant any
// rights to the materials distributed herewith. Except as
// otherwise provided in a valid license issued to you by
// Xilinx, and to the maximum extent permitted by applicable
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// (2) Xilinx shall not be liable (whether in contract or tort,
// including negligence, or under any other theory of
// liability) for any loss or damage of any kind or nature
// related to, arising under or in connection with these
// materials, including for any direct, or any indirect,
// special, incidental, or consequential loss or damage
// (including loss of data, profits, goodwill, or any type of
// loss or damage suffered as a result of any action brought
// by a third party) even if such damage or loss was
// reasonably foreseeable or Xilinx had been advised of the
// possibility of the same.
//
// CRITICAL APPLICATIONS
// Xilinx products are not designed or intended to be fail-
// safe, or for use in any application requiring fail-safe
// performance, such as life-support or safety devices or
// systems, Class III medical devices, nuclear facilities,
// applications related to the deployment of airbags, or any
// other applications that could lead to death, personal
// injury, or severe property or environmental damage
// (individually and collectively, "Critical
// Applications"). Customer assumes the sole risk and
// liability of any use of Xilinx products in Critical
// Applications, subject only to applicable laws and
// regulations governing limitations on product liability.
//
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
// Description: SRL based FIFO for AXIS/AXI Channels.
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_infrastructure_v1_1_axic_srl_fifo #(
///////////////////////////////////////////////////////////////////////////////
// Parameter Definitions
///////////////////////////////////////////////////////////////////////////////
parameter C_FAMILY = "virtex7",
parameter integer C_PAYLOAD_WIDTH = 1,
parameter integer C_FIFO_DEPTH = 16 // Range: 4-16.
)
(
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire aclk, // Clock
input wire aresetn, // Reset
input wire [C_PAYLOAD_WIDTH-1:0] s_payload, // Input data
input wire s_valid, // Input data valid
output reg s_ready, // Input data ready
output wire [C_PAYLOAD_WIDTH-1:0] m_payload, // Output data
output reg m_valid, // Output data valid
input wire m_ready // Output data ready
);
////////////////////////////////////////////////////////////////////////////////
// Functions
////////////////////////////////////////////////////////////////////////////////
// ceiling logb2
function integer f_clogb2 (input integer size);
integer s;
begin
s = size;
s = s - 1;
for (f_clogb2=1; s>1; f_clogb2=f_clogb2+1)
s = s >> 1;
end
endfunction // clogb2
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
localparam integer LP_LOG_FIFO_DEPTH = f_clogb2(C_FIFO_DEPTH);
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [LP_LOG_FIFO_DEPTH-1:0] fifo_index;
wire [4-1:0] fifo_addr;
wire push;
wire pop ;
reg areset_r1;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
////////////////////////////////////////////////////////////////////////////////
always @(posedge aclk) begin
areset_r1 <= ~aresetn;
end
always @(posedge aclk) begin
if (~aresetn) begin
fifo_index <= {LP_LOG_FIFO_DEPTH{1'b1}};
end
else begin
fifo_index <= push & ~pop ? fifo_index + 1'b1 :
~push & pop ? fifo_index - 1'b1 :
fifo_index;
end
end
assign push = s_valid & s_ready;
always @(posedge aclk) begin
if (~aresetn) begin
s_ready <= 1'b0;
end
else begin
s_ready <= areset_r1 ? 1'b1 :
push & ~pop && (fifo_index == (C_FIFO_DEPTH - 2'd2)) ? 1'b0 :
~push & pop ? 1'b1 :
s_ready;
end
end
assign pop = m_valid & m_ready;
always @(posedge aclk) begin
if (~aresetn) begin
m_valid <= 1'b0;
end
else begin
m_valid <= ~push & pop && (fifo_index == {LP_LOG_FIFO_DEPTH{1'b0}}) ? 1'b0 :
push & ~pop ? 1'b1 :
m_valid;
end
end
generate
if (LP_LOG_FIFO_DEPTH < 4) begin : gen_pad_fifo_addr
assign fifo_addr[0+:LP_LOG_FIFO_DEPTH] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
assign fifo_addr[LP_LOG_FIFO_DEPTH+:(4-LP_LOG_FIFO_DEPTH)] = {4-LP_LOG_FIFO_DEPTH{1'b0}};
end
else begin : gen_fifo_addr
assign fifo_addr[LP_LOG_FIFO_DEPTH-1:0] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
end
endgenerate
generate
genvar i;
for (i = 0; i < C_PAYLOAD_WIDTH; i = i + 1) begin : gen_data_bit
SRL16E
u_srl_fifo(
.Q ( m_payload[i] ) ,
.A0 ( fifo_addr[0] ) ,
.A1 ( fifo_addr[1] ) ,
.A2 ( fifo_addr[2] ) ,
.A3 ( fifo_addr[3] ) ,
.CE ( push ) ,
.CLK ( aclk ) ,
.D ( s_payload[i] )
);
end
endgenerate
endmodule
`default_nettype wire
|
// (c) Copyright 2012-2013 Xilinx, Inc. All rights reserved.
//
// This file contains confidential and proprietary information
// of Xilinx, Inc. and is protected under U.S. and
// international copyright and other intellectual property
// laws.
//
// DISCLAIMER
// This disclaimer is not a license and does not grant any
// rights to the materials distributed herewith. Except as
// otherwise provided in a valid license issued to you by
// Xilinx, and to the maximum extent permitted by applicable
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// (2) Xilinx shall not be liable (whether in contract or tort,
// including negligence, or under any other theory of
// liability) for any loss or damage of any kind or nature
// related to, arising under or in connection with these
// materials, including for any direct, or any indirect,
// special, incidental, or consequential loss or damage
// (including loss of data, profits, goodwill, or any type of
// loss or damage suffered as a result of any action brought
// by a third party) even if such damage or loss was
// reasonably foreseeable or Xilinx had been advised of the
// possibility of the same.
//
// CRITICAL APPLICATIONS
// Xilinx products are not designed or intended to be fail-
// safe, or for use in any application requiring fail-safe
// performance, such as life-support or safety devices or
// systems, Class III medical devices, nuclear facilities,
// applications related to the deployment of airbags, or any
// other applications that could lead to death, personal
// injury, or severe property or environmental damage
// (individually and collectively, "Critical
// Applications"). Customer assumes the sole risk and
// liability of any use of Xilinx products in Critical
// Applications, subject only to applicable laws and
// regulations governing limitations on product liability.
//
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
// Description: SRL based FIFO for AXIS/AXI Channels.
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_infrastructure_v1_1_axic_srl_fifo #(
///////////////////////////////////////////////////////////////////////////////
// Parameter Definitions
///////////////////////////////////////////////////////////////////////////////
parameter C_FAMILY = "virtex7",
parameter integer C_PAYLOAD_WIDTH = 1,
parameter integer C_FIFO_DEPTH = 16 // Range: 4-16.
)
(
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire aclk, // Clock
input wire aresetn, // Reset
input wire [C_PAYLOAD_WIDTH-1:0] s_payload, // Input data
input wire s_valid, // Input data valid
output reg s_ready, // Input data ready
output wire [C_PAYLOAD_WIDTH-1:0] m_payload, // Output data
output reg m_valid, // Output data valid
input wire m_ready // Output data ready
);
////////////////////////////////////////////////////////////////////////////////
// Functions
////////////////////////////////////////////////////////////////////////////////
// ceiling logb2
function integer f_clogb2 (input integer size);
integer s;
begin
s = size;
s = s - 1;
for (f_clogb2=1; s>1; f_clogb2=f_clogb2+1)
s = s >> 1;
end
endfunction // clogb2
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
localparam integer LP_LOG_FIFO_DEPTH = f_clogb2(C_FIFO_DEPTH);
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [LP_LOG_FIFO_DEPTH-1:0] fifo_index;
wire [4-1:0] fifo_addr;
wire push;
wire pop ;
reg areset_r1;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
////////////////////////////////////////////////////////////////////////////////
always @(posedge aclk) begin
areset_r1 <= ~aresetn;
end
always @(posedge aclk) begin
if (~aresetn) begin
fifo_index <= {LP_LOG_FIFO_DEPTH{1'b1}};
end
else begin
fifo_index <= push & ~pop ? fifo_index + 1'b1 :
~push & pop ? fifo_index - 1'b1 :
fifo_index;
end
end
assign push = s_valid & s_ready;
always @(posedge aclk) begin
if (~aresetn) begin
s_ready <= 1'b0;
end
else begin
s_ready <= areset_r1 ? 1'b1 :
push & ~pop && (fifo_index == (C_FIFO_DEPTH - 2'd2)) ? 1'b0 :
~push & pop ? 1'b1 :
s_ready;
end
end
assign pop = m_valid & m_ready;
always @(posedge aclk) begin
if (~aresetn) begin
m_valid <= 1'b0;
end
else begin
m_valid <= ~push & pop && (fifo_index == {LP_LOG_FIFO_DEPTH{1'b0}}) ? 1'b0 :
push & ~pop ? 1'b1 :
m_valid;
end
end
generate
if (LP_LOG_FIFO_DEPTH < 4) begin : gen_pad_fifo_addr
assign fifo_addr[0+:LP_LOG_FIFO_DEPTH] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
assign fifo_addr[LP_LOG_FIFO_DEPTH+:(4-LP_LOG_FIFO_DEPTH)] = {4-LP_LOG_FIFO_DEPTH{1'b0}};
end
else begin : gen_fifo_addr
assign fifo_addr[LP_LOG_FIFO_DEPTH-1:0] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
end
endgenerate
generate
genvar i;
for (i = 0; i < C_PAYLOAD_WIDTH; i = i + 1) begin : gen_data_bit
SRL16E
u_srl_fifo(
.Q ( m_payload[i] ) ,
.A0 ( fifo_addr[0] ) ,
.A1 ( fifo_addr[1] ) ,
.A2 ( fifo_addr[2] ) ,
.A3 ( fifo_addr[3] ) ,
.CE ( push ) ,
.CLK ( aclk ) ,
.D ( s_payload[i] )
);
end
endgenerate
endmodule
`default_nettype wire
|
// (c) Copyright 2012-2013 Xilinx, Inc. All rights reserved.
//
// This file contains confidential and proprietary information
// of Xilinx, Inc. and is protected under U.S. and
// international copyright and other intellectual property
// laws.
//
// DISCLAIMER
// This disclaimer is not a license and does not grant any
// rights to the materials distributed herewith. Except as
// otherwise provided in a valid license issued to you by
// Xilinx, and to the maximum extent permitted by applicable
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// (2) Xilinx shall not be liable (whether in contract or tort,
// including negligence, or under any other theory of
// liability) for any loss or damage of any kind or nature
// related to, arising under or in connection with these
// materials, including for any direct, or any indirect,
// special, incidental, or consequential loss or damage
// (including loss of data, profits, goodwill, or any type of
// loss or damage suffered as a result of any action brought
// by a third party) even if such damage or loss was
// reasonably foreseeable or Xilinx had been advised of the
// possibility of the same.
//
// CRITICAL APPLICATIONS
// Xilinx products are not designed or intended to be fail-
// safe, or for use in any application requiring fail-safe
// performance, such as life-support or safety devices or
// systems, Class III medical devices, nuclear facilities,
// applications related to the deployment of airbags, or any
// other applications that could lead to death, personal
// injury, or severe property or environmental damage
// (individually and collectively, "Critical
// Applications"). Customer assumes the sole risk and
// liability of any use of Xilinx products in Critical
// Applications, subject only to applicable laws and
// regulations governing limitations on product liability.
//
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
// Description: SRL based FIFO for AXIS/AXI Channels.
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_infrastructure_v1_1_axic_srl_fifo #(
///////////////////////////////////////////////////////////////////////////////
// Parameter Definitions
///////////////////////////////////////////////////////////////////////////////
parameter C_FAMILY = "virtex7",
parameter integer C_PAYLOAD_WIDTH = 1,
parameter integer C_FIFO_DEPTH = 16 // Range: 4-16.
)
(
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire aclk, // Clock
input wire aresetn, // Reset
input wire [C_PAYLOAD_WIDTH-1:0] s_payload, // Input data
input wire s_valid, // Input data valid
output reg s_ready, // Input data ready
output wire [C_PAYLOAD_WIDTH-1:0] m_payload, // Output data
output reg m_valid, // Output data valid
input wire m_ready // Output data ready
);
////////////////////////////////////////////////////////////////////////////////
// Functions
////////////////////////////////////////////////////////////////////////////////
// ceiling logb2
function integer f_clogb2 (input integer size);
integer s;
begin
s = size;
s = s - 1;
for (f_clogb2=1; s>1; f_clogb2=f_clogb2+1)
s = s >> 1;
end
endfunction // clogb2
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
localparam integer LP_LOG_FIFO_DEPTH = f_clogb2(C_FIFO_DEPTH);
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [LP_LOG_FIFO_DEPTH-1:0] fifo_index;
wire [4-1:0] fifo_addr;
wire push;
wire pop ;
reg areset_r1;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
////////////////////////////////////////////////////////////////////////////////
always @(posedge aclk) begin
areset_r1 <= ~aresetn;
end
always @(posedge aclk) begin
if (~aresetn) begin
fifo_index <= {LP_LOG_FIFO_DEPTH{1'b1}};
end
else begin
fifo_index <= push & ~pop ? fifo_index + 1'b1 :
~push & pop ? fifo_index - 1'b1 :
fifo_index;
end
end
assign push = s_valid & s_ready;
always @(posedge aclk) begin
if (~aresetn) begin
s_ready <= 1'b0;
end
else begin
s_ready <= areset_r1 ? 1'b1 :
push & ~pop && (fifo_index == (C_FIFO_DEPTH - 2'd2)) ? 1'b0 :
~push & pop ? 1'b1 :
s_ready;
end
end
assign pop = m_valid & m_ready;
always @(posedge aclk) begin
if (~aresetn) begin
m_valid <= 1'b0;
end
else begin
m_valid <= ~push & pop && (fifo_index == {LP_LOG_FIFO_DEPTH{1'b0}}) ? 1'b0 :
push & ~pop ? 1'b1 :
m_valid;
end
end
generate
if (LP_LOG_FIFO_DEPTH < 4) begin : gen_pad_fifo_addr
assign fifo_addr[0+:LP_LOG_FIFO_DEPTH] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
assign fifo_addr[LP_LOG_FIFO_DEPTH+:(4-LP_LOG_FIFO_DEPTH)] = {4-LP_LOG_FIFO_DEPTH{1'b0}};
end
else begin : gen_fifo_addr
assign fifo_addr[LP_LOG_FIFO_DEPTH-1:0] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
end
endgenerate
generate
genvar i;
for (i = 0; i < C_PAYLOAD_WIDTH; i = i + 1) begin : gen_data_bit
SRL16E
u_srl_fifo(
.Q ( m_payload[i] ) ,
.A0 ( fifo_addr[0] ) ,
.A1 ( fifo_addr[1] ) ,
.A2 ( fifo_addr[2] ) ,
.A3 ( fifo_addr[3] ) ,
.CE ( push ) ,
.CLK ( aclk ) ,
.D ( s_payload[i] )
);
end
endgenerate
endmodule
`default_nettype wire
|
// (c) Copyright 2012-2013 Xilinx, Inc. All rights reserved.
//
// This file contains confidential and proprietary information
// of Xilinx, Inc. and is protected under U.S. and
// international copyright and other intellectual property
// laws.
//
// DISCLAIMER
// This disclaimer is not a license and does not grant any
// rights to the materials distributed herewith. Except as
// otherwise provided in a valid license issued to you by
// Xilinx, and to the maximum extent permitted by applicable
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// (2) Xilinx shall not be liable (whether in contract or tort,
// including negligence, or under any other theory of
// liability) for any loss or damage of any kind or nature
// related to, arising under or in connection with these
// materials, including for any direct, or any indirect,
// special, incidental, or consequential loss or damage
// (including loss of data, profits, goodwill, or any type of
// loss or damage suffered as a result of any action brought
// by a third party) even if such damage or loss was
// reasonably foreseeable or Xilinx had been advised of the
// possibility of the same.
//
// CRITICAL APPLICATIONS
// Xilinx products are not designed or intended to be fail-
// safe, or for use in any application requiring fail-safe
// performance, such as life-support or safety devices or
// systems, Class III medical devices, nuclear facilities,
// applications related to the deployment of airbags, or any
// other applications that could lead to death, personal
// injury, or severe property or environmental damage
// (individually and collectively, "Critical
// Applications"). Customer assumes the sole risk and
// liability of any use of Xilinx products in Critical
// Applications, subject only to applicable laws and
// regulations governing limitations on product liability.
//
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
// Description: SRL based FIFO for AXIS/AXI Channels.
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_infrastructure_v1_1_axic_srl_fifo #(
///////////////////////////////////////////////////////////////////////////////
// Parameter Definitions
///////////////////////////////////////////////////////////////////////////////
parameter C_FAMILY = "virtex7",
parameter integer C_PAYLOAD_WIDTH = 1,
parameter integer C_FIFO_DEPTH = 16 // Range: 4-16.
)
(
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire aclk, // Clock
input wire aresetn, // Reset
input wire [C_PAYLOAD_WIDTH-1:0] s_payload, // Input data
input wire s_valid, // Input data valid
output reg s_ready, // Input data ready
output wire [C_PAYLOAD_WIDTH-1:0] m_payload, // Output data
output reg m_valid, // Output data valid
input wire m_ready // Output data ready
);
////////////////////////////////////////////////////////////////////////////////
// Functions
////////////////////////////////////////////////////////////////////////////////
// ceiling logb2
function integer f_clogb2 (input integer size);
integer s;
begin
s = size;
s = s - 1;
for (f_clogb2=1; s>1; f_clogb2=f_clogb2+1)
s = s >> 1;
end
endfunction // clogb2
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
localparam integer LP_LOG_FIFO_DEPTH = f_clogb2(C_FIFO_DEPTH);
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [LP_LOG_FIFO_DEPTH-1:0] fifo_index;
wire [4-1:0] fifo_addr;
wire push;
wire pop ;
reg areset_r1;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
////////////////////////////////////////////////////////////////////////////////
always @(posedge aclk) begin
areset_r1 <= ~aresetn;
end
always @(posedge aclk) begin
if (~aresetn) begin
fifo_index <= {LP_LOG_FIFO_DEPTH{1'b1}};
end
else begin
fifo_index <= push & ~pop ? fifo_index + 1'b1 :
~push & pop ? fifo_index - 1'b1 :
fifo_index;
end
end
assign push = s_valid & s_ready;
always @(posedge aclk) begin
if (~aresetn) begin
s_ready <= 1'b0;
end
else begin
s_ready <= areset_r1 ? 1'b1 :
push & ~pop && (fifo_index == (C_FIFO_DEPTH - 2'd2)) ? 1'b0 :
~push & pop ? 1'b1 :
s_ready;
end
end
assign pop = m_valid & m_ready;
always @(posedge aclk) begin
if (~aresetn) begin
m_valid <= 1'b0;
end
else begin
m_valid <= ~push & pop && (fifo_index == {LP_LOG_FIFO_DEPTH{1'b0}}) ? 1'b0 :
push & ~pop ? 1'b1 :
m_valid;
end
end
generate
if (LP_LOG_FIFO_DEPTH < 4) begin : gen_pad_fifo_addr
assign fifo_addr[0+:LP_LOG_FIFO_DEPTH] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
assign fifo_addr[LP_LOG_FIFO_DEPTH+:(4-LP_LOG_FIFO_DEPTH)] = {4-LP_LOG_FIFO_DEPTH{1'b0}};
end
else begin : gen_fifo_addr
assign fifo_addr[LP_LOG_FIFO_DEPTH-1:0] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
end
endgenerate
generate
genvar i;
for (i = 0; i < C_PAYLOAD_WIDTH; i = i + 1) begin : gen_data_bit
SRL16E
u_srl_fifo(
.Q ( m_payload[i] ) ,
.A0 ( fifo_addr[0] ) ,
.A1 ( fifo_addr[1] ) ,
.A2 ( fifo_addr[2] ) ,
.A3 ( fifo_addr[3] ) ,
.CE ( push ) ,
.CLK ( aclk ) ,
.D ( s_payload[i] )
);
end
endgenerate
endmodule
`default_nettype wire
|
// (c) Copyright 2012-2013 Xilinx, Inc. All rights reserved.
//
// This file contains confidential and proprietary information
// of Xilinx, Inc. and is protected under U.S. and
// international copyright and other intellectual property
// laws.
//
// DISCLAIMER
// This disclaimer is not a license and does not grant any
// rights to the materials distributed herewith. Except as
// otherwise provided in a valid license issued to you by
// Xilinx, and to the maximum extent permitted by applicable
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// (2) Xilinx shall not be liable (whether in contract or tort,
// including negligence, or under any other theory of
// liability) for any loss or damage of any kind or nature
// related to, arising under or in connection with these
// materials, including for any direct, or any indirect,
// special, incidental, or consequential loss or damage
// (including loss of data, profits, goodwill, or any type of
// loss or damage suffered as a result of any action brought
// by a third party) even if such damage or loss was
// reasonably foreseeable or Xilinx had been advised of the
// possibility of the same.
//
// CRITICAL APPLICATIONS
// Xilinx products are not designed or intended to be fail-
// safe, or for use in any application requiring fail-safe
// performance, such as life-support or safety devices or
// systems, Class III medical devices, nuclear facilities,
// applications related to the deployment of airbags, or any
// other applications that could lead to death, personal
// injury, or severe property or environmental damage
// (individually and collectively, "Critical
// Applications"). Customer assumes the sole risk and
// liability of any use of Xilinx products in Critical
// Applications, subject only to applicable laws and
// regulations governing limitations on product liability.
//
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
// Description: SRL based FIFO for AXIS/AXI Channels.
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_infrastructure_v1_1_axic_srl_fifo #(
///////////////////////////////////////////////////////////////////////////////
// Parameter Definitions
///////////////////////////////////////////////////////////////////////////////
parameter C_FAMILY = "virtex7",
parameter integer C_PAYLOAD_WIDTH = 1,
parameter integer C_FIFO_DEPTH = 16 // Range: 4-16.
)
(
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire aclk, // Clock
input wire aresetn, // Reset
input wire [C_PAYLOAD_WIDTH-1:0] s_payload, // Input data
input wire s_valid, // Input data valid
output reg s_ready, // Input data ready
output wire [C_PAYLOAD_WIDTH-1:0] m_payload, // Output data
output reg m_valid, // Output data valid
input wire m_ready // Output data ready
);
////////////////////////////////////////////////////////////////////////////////
// Functions
////////////////////////////////////////////////////////////////////////////////
// ceiling logb2
function integer f_clogb2 (input integer size);
integer s;
begin
s = size;
s = s - 1;
for (f_clogb2=1; s>1; f_clogb2=f_clogb2+1)
s = s >> 1;
end
endfunction // clogb2
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
localparam integer LP_LOG_FIFO_DEPTH = f_clogb2(C_FIFO_DEPTH);
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [LP_LOG_FIFO_DEPTH-1:0] fifo_index;
wire [4-1:0] fifo_addr;
wire push;
wire pop ;
reg areset_r1;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
////////////////////////////////////////////////////////////////////////////////
always @(posedge aclk) begin
areset_r1 <= ~aresetn;
end
always @(posedge aclk) begin
if (~aresetn) begin
fifo_index <= {LP_LOG_FIFO_DEPTH{1'b1}};
end
else begin
fifo_index <= push & ~pop ? fifo_index + 1'b1 :
~push & pop ? fifo_index - 1'b1 :
fifo_index;
end
end
assign push = s_valid & s_ready;
always @(posedge aclk) begin
if (~aresetn) begin
s_ready <= 1'b0;
end
else begin
s_ready <= areset_r1 ? 1'b1 :
push & ~pop && (fifo_index == (C_FIFO_DEPTH - 2'd2)) ? 1'b0 :
~push & pop ? 1'b1 :
s_ready;
end
end
assign pop = m_valid & m_ready;
always @(posedge aclk) begin
if (~aresetn) begin
m_valid <= 1'b0;
end
else begin
m_valid <= ~push & pop && (fifo_index == {LP_LOG_FIFO_DEPTH{1'b0}}) ? 1'b0 :
push & ~pop ? 1'b1 :
m_valid;
end
end
generate
if (LP_LOG_FIFO_DEPTH < 4) begin : gen_pad_fifo_addr
assign fifo_addr[0+:LP_LOG_FIFO_DEPTH] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
assign fifo_addr[LP_LOG_FIFO_DEPTH+:(4-LP_LOG_FIFO_DEPTH)] = {4-LP_LOG_FIFO_DEPTH{1'b0}};
end
else begin : gen_fifo_addr
assign fifo_addr[LP_LOG_FIFO_DEPTH-1:0] = fifo_index[LP_LOG_FIFO_DEPTH-1:0];
end
endgenerate
generate
genvar i;
for (i = 0; i < C_PAYLOAD_WIDTH; i = i + 1) begin : gen_data_bit
SRL16E
u_srl_fifo(
.Q ( m_payload[i] ) ,
.A0 ( fifo_addr[0] ) ,
.A1 ( fifo_addr[1] ) ,
.A2 ( fifo_addr[2] ) ,
.A3 ( fifo_addr[3] ) ,
.CE ( push ) ,
.CLK ( aclk ) ,
.D ( s_payload[i] )
);
end
endgenerate
endmodule
`default_nettype wire
|
`include "hi_read_tx.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
shallow_modulation - modulation type
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_hi_read_tx;
reg pck0;
reg [7:0] adc_d;
reg shallow_modulation;
wire pwr_lo;
wire adc_clk;
reg ck_1356meg;
reg ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
wire cross_lo;
wire cross_hi;
wire dbg;
hi_read_tx #(5,200) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg),
.shallow_modulation(shallow_modulation)
);
integer idx, i;
// main clock
always #5 begin
ck_1356megb = !ck_1356megb;
ck_1356meg = ck_1356megb;
end
//crank DUT
task crank_dut;
begin
@(posedge ssp_clk) ;
ssp_dout = $random;
end
endtask
initial begin
// init inputs
ck_1356megb = 0;
adc_d = 0;
ssp_dout=0;
// shallow modulation off
shallow_modulation=0;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
// shallow modulation on
shallow_modulation=1;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main
|
`include "hi_read_tx.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
shallow_modulation - modulation type
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_hi_read_tx;
reg pck0;
reg [7:0] adc_d;
reg shallow_modulation;
wire pwr_lo;
wire adc_clk;
reg ck_1356meg;
reg ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
wire cross_lo;
wire cross_hi;
wire dbg;
hi_read_tx #(5,200) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg),
.shallow_modulation(shallow_modulation)
);
integer idx, i;
// main clock
always #5 begin
ck_1356megb = !ck_1356megb;
ck_1356meg = ck_1356megb;
end
//crank DUT
task crank_dut;
begin
@(posedge ssp_clk) ;
ssp_dout = $random;
end
endtask
initial begin
// init inputs
ck_1356megb = 0;
adc_d = 0;
ssp_dout=0;
// shallow modulation off
shallow_modulation=0;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
// shallow modulation on
shallow_modulation=1;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main
|
`include "hi_read_tx.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
shallow_modulation - modulation type
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_hi_read_tx;
reg pck0;
reg [7:0] adc_d;
reg shallow_modulation;
wire pwr_lo;
wire adc_clk;
reg ck_1356meg;
reg ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
wire cross_lo;
wire cross_hi;
wire dbg;
hi_read_tx #(5,200) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg),
.shallow_modulation(shallow_modulation)
);
integer idx, i;
// main clock
always #5 begin
ck_1356megb = !ck_1356megb;
ck_1356meg = ck_1356megb;
end
//crank DUT
task crank_dut;
begin
@(posedge ssp_clk) ;
ssp_dout = $random;
end
endtask
initial begin
// init inputs
ck_1356megb = 0;
adc_d = 0;
ssp_dout=0;
// shallow modulation off
shallow_modulation=0;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
// shallow modulation on
shallow_modulation=1;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main
|
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_aw_channel #
(
///////////////////////////////////////////////////////////////////////////////
// Parameter Definitions
///////////////////////////////////////////////////////////////////////////////
// Width of ID signals.
// Range: >= 1.
parameter integer C_ID_WIDTH = 4,
// Width of AxADDR
// Range: 32.
parameter integer C_AXI_ADDR_WIDTH = 32
)
(
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
// AXI Slave Interface
// Slave Interface System Signals
input wire clk ,
input wire reset ,
// Slave Interface Write Address Ports
input wire [C_ID_WIDTH-1:0] s_awid ,
input wire [C_AXI_ADDR_WIDTH-1:0] s_awaddr ,
input wire [7:0] s_awlen ,
input wire [2:0] s_awsize ,
input wire [1:0] s_awburst ,
input wire s_awvalid ,
output wire s_awready ,
output wire m_awvalid ,
output wire [C_AXI_ADDR_WIDTH-1:0] m_awaddr ,
input wire m_awready ,
// Connections to/from axi_protocol_converter_v2_1_b2s_b_channel module
output wire b_push ,
output wire [C_ID_WIDTH-1:0] b_awid ,
output wire [7:0] b_awlen ,
input wire b_full
);
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
wire next ;
wire next_pending ;
wire a_push;
wire incr_burst;
reg [C_ID_WIDTH-1:0] s_awid_r;
reg [7:0] s_awlen_r;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
////////////////////////////////////////////////////////////////////////////////
// Translate the AXI transaction to the MC transaction(s)
axi_protocol_converter_v2_1_b2s_cmd_translator #
(
.C_AXI_ADDR_WIDTH ( C_AXI_ADDR_WIDTH )
)
cmd_translator_0
(
.clk ( clk ) ,
.reset ( reset ) ,
.s_axaddr ( s_awaddr ) ,
.s_axlen ( s_awlen ) ,
.s_axsize ( s_awsize ) ,
.s_axburst ( s_awburst ) ,
.s_axhandshake ( s_awvalid & a_push ) ,
.m_axaddr ( m_awaddr ) ,
.incr_burst ( incr_burst ) ,
.next ( next ) ,
.next_pending ( next_pending )
);
axi_protocol_converter_v2_1_b2s_wr_cmd_fsm aw_cmd_fsm_0
(
.clk ( clk ) ,
.reset ( reset ) ,
.s_awready ( s_awready ) ,
.s_awvalid ( s_awvalid ) ,
.m_awvalid ( m_awvalid ) ,
.m_awready ( m_awready ) ,
.next ( next ) ,
.next_pending ( next_pending ) ,
.b_push ( b_push ) ,
.b_full ( b_full ) ,
.a_push ( a_push )
);
assign b_awid = s_awid_r;
assign b_awlen = s_awlen_r;
always @(posedge clk) begin
s_awid_r <= s_awid ;
s_awlen_r <= s_awlen ;
end
endmodule
`default_nettype wire
|
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 03/17/2016 05:20:59 PM
// Design Name:
// Module Name: Priority_Codec_64
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Priority_Codec_64(
input wire [54:0] Data_Dec_i,
output reg [5:0] Data_Bin_o
);
always @(Data_Dec_i)
begin
Data_Bin_o=6'b000000;
if(~Data_Dec_i[54]) begin Data_Bin_o = 6'b000000;//0
end else if(~Data_Dec_i[53]) begin Data_Bin_o = 6'b000001;//1
end else if(~Data_Dec_i[52]) begin Data_Bin_o = 6'b000010;//2
end else if(~Data_Dec_i[51]) begin Data_Bin_o = 6'b000011;//3
end else if(~Data_Dec_i[50]) begin Data_Bin_o = 6'b000100;//4
end else if(~Data_Dec_i[49]) begin Data_Bin_o = 6'b000101;//5
end else if(~Data_Dec_i[48]) begin Data_Bin_o = 6'b000110;//6
end else if(~Data_Dec_i[47]) begin Data_Bin_o = 6'b000111;//7
end else if(~Data_Dec_i[46]) begin Data_Bin_o = 6'b001000;//8
end else if(~Data_Dec_i[45]) begin Data_Bin_o = 6'b001001;//9
end else if(~Data_Dec_i[44]) begin Data_Bin_o = 6'b001010;//10
end else if(~Data_Dec_i[43]) begin Data_Bin_o = 6'b001011;//11
end else if(~Data_Dec_i[42]) begin Data_Bin_o = 6'b001100;//12
end else if(~Data_Dec_i[41]) begin Data_Bin_o = 6'b001101;//13
end else if(~Data_Dec_i[40]) begin Data_Bin_o = 6'b001110;//14
end else if(~Data_Dec_i[39]) begin Data_Bin_o = 6'b001111;//15
end else if(~Data_Dec_i[38]) begin Data_Bin_o = 6'b010000;//16
end else if(~Data_Dec_i[37]) begin Data_Bin_o = 6'b010001;//17
end else if(~Data_Dec_i[36]) begin Data_Bin_o = 6'b010010;//18
end else if(~Data_Dec_i[35]) begin Data_Bin_o = 6'b010011;//19
end else if(~Data_Dec_i[34]) begin Data_Bin_o = 6'b010100;//20
end else if(~Data_Dec_i[33]) begin Data_Bin_o = 6'b010101;//21
end else if(~Data_Dec_i[32]) begin Data_Bin_o = 6'b010110;//22
end else if(~Data_Dec_i[31]) begin Data_Bin_o = 6'b010111;//23
end else if(~Data_Dec_i[30]) begin Data_Bin_o = 6'b011000;//24
end else if(~Data_Dec_i[29]) begin Data_Bin_o = 6'b010101;//25
end else if(~Data_Dec_i[28]) begin Data_Bin_o = 6'b010110;//26
end else if(~Data_Dec_i[27]) begin Data_Bin_o = 6'b010111;//27
end else if(~Data_Dec_i[26]) begin Data_Bin_o = 6'b011000;//28
end else if(~Data_Dec_i[25]) begin Data_Bin_o = 6'b011001;//29
end else if(~Data_Dec_i[24]) begin Data_Bin_o = 6'b011010;//30
end else if(~Data_Dec_i[23]) begin Data_Bin_o = 6'b011011;//31
end else if(~Data_Dec_i[22]) begin Data_Bin_o = 6'b011100;//32
end else if(~Data_Dec_i[21]) begin Data_Bin_o = 6'b011101;//33
end else if(~Data_Dec_i[20]) begin Data_Bin_o = 6'b011110;//34
end else if(~Data_Dec_i[19]) begin Data_Bin_o = 6'b011111;//35
end else if(~Data_Dec_i[18]) begin Data_Bin_o = 6'b100000;//36
end else if(~Data_Dec_i[17]) begin Data_Bin_o = 6'b100001;//37
end else if(~Data_Dec_i[16]) begin Data_Bin_o = 6'b100010;//38
end else if(~Data_Dec_i[15]) begin Data_Bin_o = 6'b100011;//39
end else if(~Data_Dec_i[14]) begin Data_Bin_o = 6'b100100;//40
end else if(~Data_Dec_i[13]) begin Data_Bin_o = 6'b100101;//41
end else if(~Data_Dec_i[12]) begin Data_Bin_o = 6'b100110;//42
end else if(~Data_Dec_i[11]) begin Data_Bin_o = 6'b100111;//43
end else if(~Data_Dec_i[10]) begin Data_Bin_o = 6'b101000;//44
end else if(~Data_Dec_i[9]) begin Data_Bin_o = 6'b101001;//45
end else if(~Data_Dec_i[8]) begin Data_Bin_o = 6'b101010;//46
end else if(~Data_Dec_i[7]) begin Data_Bin_o = 6'b101011;//47
end else if(~Data_Dec_i[6]) begin Data_Bin_o = 6'b101100;//48
end else if(~Data_Dec_i[5]) begin Data_Bin_o = 6'b101101;//49
end else if(~Data_Dec_i[4]) begin Data_Bin_o = 6'b101110;//50
end else if(~Data_Dec_i[3]) begin Data_Bin_o = 6'b101111;//51
end else if(~Data_Dec_i[2]) begin Data_Bin_o = 6'b110000;//52
end else if(~Data_Dec_i[1]) begin Data_Bin_o = 6'b110001;//53
end else if(~Data_Dec_i[0]) begin Data_Bin_o = 6'b110010;//54
end else begin Data_Bin_o = 6'b000000;//zero value
end
end
endmodule |
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 03/17/2016 05:20:59 PM
// Design Name:
// Module Name: Priority_Codec_64
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Priority_Codec_64(
input wire [54:0] Data_Dec_i,
output reg [5:0] Data_Bin_o
);
always @(Data_Dec_i)
begin
Data_Bin_o=6'b000000;
if(~Data_Dec_i[54]) begin Data_Bin_o = 6'b000000;//0
end else if(~Data_Dec_i[53]) begin Data_Bin_o = 6'b000001;//1
end else if(~Data_Dec_i[52]) begin Data_Bin_o = 6'b000010;//2
end else if(~Data_Dec_i[51]) begin Data_Bin_o = 6'b000011;//3
end else if(~Data_Dec_i[50]) begin Data_Bin_o = 6'b000100;//4
end else if(~Data_Dec_i[49]) begin Data_Bin_o = 6'b000101;//5
end else if(~Data_Dec_i[48]) begin Data_Bin_o = 6'b000110;//6
end else if(~Data_Dec_i[47]) begin Data_Bin_o = 6'b000111;//7
end else if(~Data_Dec_i[46]) begin Data_Bin_o = 6'b001000;//8
end else if(~Data_Dec_i[45]) begin Data_Bin_o = 6'b001001;//9
end else if(~Data_Dec_i[44]) begin Data_Bin_o = 6'b001010;//10
end else if(~Data_Dec_i[43]) begin Data_Bin_o = 6'b001011;//11
end else if(~Data_Dec_i[42]) begin Data_Bin_o = 6'b001100;//12
end else if(~Data_Dec_i[41]) begin Data_Bin_o = 6'b001101;//13
end else if(~Data_Dec_i[40]) begin Data_Bin_o = 6'b001110;//14
end else if(~Data_Dec_i[39]) begin Data_Bin_o = 6'b001111;//15
end else if(~Data_Dec_i[38]) begin Data_Bin_o = 6'b010000;//16
end else if(~Data_Dec_i[37]) begin Data_Bin_o = 6'b010001;//17
end else if(~Data_Dec_i[36]) begin Data_Bin_o = 6'b010010;//18
end else if(~Data_Dec_i[35]) begin Data_Bin_o = 6'b010011;//19
end else if(~Data_Dec_i[34]) begin Data_Bin_o = 6'b010100;//20
end else if(~Data_Dec_i[33]) begin Data_Bin_o = 6'b010101;//21
end else if(~Data_Dec_i[32]) begin Data_Bin_o = 6'b010110;//22
end else if(~Data_Dec_i[31]) begin Data_Bin_o = 6'b010111;//23
end else if(~Data_Dec_i[30]) begin Data_Bin_o = 6'b011000;//24
end else if(~Data_Dec_i[29]) begin Data_Bin_o = 6'b010101;//25
end else if(~Data_Dec_i[28]) begin Data_Bin_o = 6'b010110;//26
end else if(~Data_Dec_i[27]) begin Data_Bin_o = 6'b010111;//27
end else if(~Data_Dec_i[26]) begin Data_Bin_o = 6'b011000;//28
end else if(~Data_Dec_i[25]) begin Data_Bin_o = 6'b011001;//29
end else if(~Data_Dec_i[24]) begin Data_Bin_o = 6'b011010;//30
end else if(~Data_Dec_i[23]) begin Data_Bin_o = 6'b011011;//31
end else if(~Data_Dec_i[22]) begin Data_Bin_o = 6'b011100;//32
end else if(~Data_Dec_i[21]) begin Data_Bin_o = 6'b011101;//33
end else if(~Data_Dec_i[20]) begin Data_Bin_o = 6'b011110;//34
end else if(~Data_Dec_i[19]) begin Data_Bin_o = 6'b011111;//35
end else if(~Data_Dec_i[18]) begin Data_Bin_o = 6'b100000;//36
end else if(~Data_Dec_i[17]) begin Data_Bin_o = 6'b100001;//37
end else if(~Data_Dec_i[16]) begin Data_Bin_o = 6'b100010;//38
end else if(~Data_Dec_i[15]) begin Data_Bin_o = 6'b100011;//39
end else if(~Data_Dec_i[14]) begin Data_Bin_o = 6'b100100;//40
end else if(~Data_Dec_i[13]) begin Data_Bin_o = 6'b100101;//41
end else if(~Data_Dec_i[12]) begin Data_Bin_o = 6'b100110;//42
end else if(~Data_Dec_i[11]) begin Data_Bin_o = 6'b100111;//43
end else if(~Data_Dec_i[10]) begin Data_Bin_o = 6'b101000;//44
end else if(~Data_Dec_i[9]) begin Data_Bin_o = 6'b101001;//45
end else if(~Data_Dec_i[8]) begin Data_Bin_o = 6'b101010;//46
end else if(~Data_Dec_i[7]) begin Data_Bin_o = 6'b101011;//47
end else if(~Data_Dec_i[6]) begin Data_Bin_o = 6'b101100;//48
end else if(~Data_Dec_i[5]) begin Data_Bin_o = 6'b101101;//49
end else if(~Data_Dec_i[4]) begin Data_Bin_o = 6'b101110;//50
end else if(~Data_Dec_i[3]) begin Data_Bin_o = 6'b101111;//51
end else if(~Data_Dec_i[2]) begin Data_Bin_o = 6'b110000;//52
end else if(~Data_Dec_i[1]) begin Data_Bin_o = 6'b110001;//53
end else if(~Data_Dec_i[0]) begin Data_Bin_o = 6'b110010;//54
end else begin Data_Bin_o = 6'b000000;//zero value
end
end
endmodule |
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 03/17/2016 05:20:59 PM
// Design Name:
// Module Name: Priority_Codec_64
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Priority_Codec_64(
input wire [54:0] Data_Dec_i,
output reg [5:0] Data_Bin_o
);
always @(Data_Dec_i)
begin
Data_Bin_o=6'b000000;
if(~Data_Dec_i[54]) begin Data_Bin_o = 6'b000000;//0
end else if(~Data_Dec_i[53]) begin Data_Bin_o = 6'b000001;//1
end else if(~Data_Dec_i[52]) begin Data_Bin_o = 6'b000010;//2
end else if(~Data_Dec_i[51]) begin Data_Bin_o = 6'b000011;//3
end else if(~Data_Dec_i[50]) begin Data_Bin_o = 6'b000100;//4
end else if(~Data_Dec_i[49]) begin Data_Bin_o = 6'b000101;//5
end else if(~Data_Dec_i[48]) begin Data_Bin_o = 6'b000110;//6
end else if(~Data_Dec_i[47]) begin Data_Bin_o = 6'b000111;//7
end else if(~Data_Dec_i[46]) begin Data_Bin_o = 6'b001000;//8
end else if(~Data_Dec_i[45]) begin Data_Bin_o = 6'b001001;//9
end else if(~Data_Dec_i[44]) begin Data_Bin_o = 6'b001010;//10
end else if(~Data_Dec_i[43]) begin Data_Bin_o = 6'b001011;//11
end else if(~Data_Dec_i[42]) begin Data_Bin_o = 6'b001100;//12
end else if(~Data_Dec_i[41]) begin Data_Bin_o = 6'b001101;//13
end else if(~Data_Dec_i[40]) begin Data_Bin_o = 6'b001110;//14
end else if(~Data_Dec_i[39]) begin Data_Bin_o = 6'b001111;//15
end else if(~Data_Dec_i[38]) begin Data_Bin_o = 6'b010000;//16
end else if(~Data_Dec_i[37]) begin Data_Bin_o = 6'b010001;//17
end else if(~Data_Dec_i[36]) begin Data_Bin_o = 6'b010010;//18
end else if(~Data_Dec_i[35]) begin Data_Bin_o = 6'b010011;//19
end else if(~Data_Dec_i[34]) begin Data_Bin_o = 6'b010100;//20
end else if(~Data_Dec_i[33]) begin Data_Bin_o = 6'b010101;//21
end else if(~Data_Dec_i[32]) begin Data_Bin_o = 6'b010110;//22
end else if(~Data_Dec_i[31]) begin Data_Bin_o = 6'b010111;//23
end else if(~Data_Dec_i[30]) begin Data_Bin_o = 6'b011000;//24
end else if(~Data_Dec_i[29]) begin Data_Bin_o = 6'b010101;//25
end else if(~Data_Dec_i[28]) begin Data_Bin_o = 6'b010110;//26
end else if(~Data_Dec_i[27]) begin Data_Bin_o = 6'b010111;//27
end else if(~Data_Dec_i[26]) begin Data_Bin_o = 6'b011000;//28
end else if(~Data_Dec_i[25]) begin Data_Bin_o = 6'b011001;//29
end else if(~Data_Dec_i[24]) begin Data_Bin_o = 6'b011010;//30
end else if(~Data_Dec_i[23]) begin Data_Bin_o = 6'b011011;//31
end else if(~Data_Dec_i[22]) begin Data_Bin_o = 6'b011100;//32
end else if(~Data_Dec_i[21]) begin Data_Bin_o = 6'b011101;//33
end else if(~Data_Dec_i[20]) begin Data_Bin_o = 6'b011110;//34
end else if(~Data_Dec_i[19]) begin Data_Bin_o = 6'b011111;//35
end else if(~Data_Dec_i[18]) begin Data_Bin_o = 6'b100000;//36
end else if(~Data_Dec_i[17]) begin Data_Bin_o = 6'b100001;//37
end else if(~Data_Dec_i[16]) begin Data_Bin_o = 6'b100010;//38
end else if(~Data_Dec_i[15]) begin Data_Bin_o = 6'b100011;//39
end else if(~Data_Dec_i[14]) begin Data_Bin_o = 6'b100100;//40
end else if(~Data_Dec_i[13]) begin Data_Bin_o = 6'b100101;//41
end else if(~Data_Dec_i[12]) begin Data_Bin_o = 6'b100110;//42
end else if(~Data_Dec_i[11]) begin Data_Bin_o = 6'b100111;//43
end else if(~Data_Dec_i[10]) begin Data_Bin_o = 6'b101000;//44
end else if(~Data_Dec_i[9]) begin Data_Bin_o = 6'b101001;//45
end else if(~Data_Dec_i[8]) begin Data_Bin_o = 6'b101010;//46
end else if(~Data_Dec_i[7]) begin Data_Bin_o = 6'b101011;//47
end else if(~Data_Dec_i[6]) begin Data_Bin_o = 6'b101100;//48
end else if(~Data_Dec_i[5]) begin Data_Bin_o = 6'b101101;//49
end else if(~Data_Dec_i[4]) begin Data_Bin_o = 6'b101110;//50
end else if(~Data_Dec_i[3]) begin Data_Bin_o = 6'b101111;//51
end else if(~Data_Dec_i[2]) begin Data_Bin_o = 6'b110000;//52
end else if(~Data_Dec_i[1]) begin Data_Bin_o = 6'b110001;//53
end else if(~Data_Dec_i[0]) begin Data_Bin_o = 6'b110010;//54
end else begin Data_Bin_o = 6'b000000;//zero value
end
end
endmodule |
Subsets and Splits
No saved queries yet
Save your SQL queries to embed, download, and access them later. Queries will appear here once saved.