Filename
stringlengths 22
64
| Paragraph
stringlengths 8
5.57k
|
|---|---|
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | JPLCT The JPL–CIT collaboration used a three-stage pipeline consisting of a track search in the time–frequency (TF) plane, followed by template-bank–based matched filtering, and by an MCMC refinement [8]. |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | All the four MBH binaries in the data set (MBH-1, 2, 4 and 5, with total SNRs ∼ 2583, 25, 174 and 117) were positively detected by AEIse, MTAEI, and JPLCT; the TF method used by LisaFrance identified MBH-1 and 4, but not MBH-2, and could report only a time of coalescence for MBH-5. |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | Table 1. Recovered SNR and parameter errors for MBH-1. All parameters are defined as in tables 2 and 4 of [4], except for µ = m1m2/(m1 + m2), Mc = (m1m2)3/5/(m1 + m2)1/5, and φc defined as the GW phase at coalescence. All errors on angles are given in radians; the true (optimal) SNR is 2583.42. |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | Table 2. Recovered SNR and parameter errors for MBH-4, given as in table 1. The true (optimal) SNR is 174.12. |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | Z)/3 and with ( ·|· Y )/√3 two noise-orthogonal TDI observables (see, e.g., [9]). In table 1, we E = (Z see that the JPLCT search for MBH-1 locked onto a secondary probability maximum with SNRbest only slightly lower than the optimal value, but with sky positions off by several degrees, which also led to errors in the other parameters. The JPLCT authors hypothesize that this was caused by first subtracting a rough MBH-1 model from the data, then subtracting the resolvable Galactic binaries, and finally refining the MBH search. |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | MBH-4 (table 1) is an interesting example of a “true” bimodal probability distribution for the source parameters. MTAEI and JPLCT each submitted two candidates, placed at rather different sky locations, quoting relative probability ratios of 1:1 and 1.18:1. In this case, it was probably the sky position and orientation of this source that conspired to degrade LISA’s positional sensitivity, since they resulted in a very weak signal in one of the noise-orthogonal observables. |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | Altogether, this challenge demonstrated a solid capability in the detection and parameter estimation of MBH inspirals with moderate SNRs, even in the presence of a strong Galactic background, at least if the inspirals can be considered close to our idealized model: circular and adiabatic with negligible spin effects. These restrictions are being relaxed for the upcoming Challenge 3. |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | Table 3. Recovered SNRs and parameter errors for the EMRI signal in data set 1.3.1. All errors are given as fractions of the allowed prior range for the corresponding parameters (0.15 for e0), except for the errors on ν0 and D. Not all parameters are shown. For their definitions, see tables 2 and 5 of [4]. The true (optimal) SNR is 130.98. |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | Three groups reported parameter sets for the EMRIs in data sets 1.3.1–1.3.4. No group tackled the problem of detecting these systems in data set 2.2 (on top of the Galactic background). |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | BBGP Babak and colleagues used an MCMC matched-filtering search that modeled the signal with a sequence of progressively longer templates (a time-annealed scheme). |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | MT Cornish used an MHMC matched-filtering search, running it in parallel on individual month-long segments, which were subsequently strung together for full detections. |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | Table 3 shows typical recovered SNRs and errors. While it is clear that the matched- filtering searches locked on several secondary probability maxima with comparable probabilities, the recovered SNRs correspond to solid detections with exceedingly low false-alarm probabilities. The errors are quoted as fractions of the allowed parameter ranges, and they are quite large. Intriguingly, the TF search was the most accurate in determining the sky position. Altogether, these challenges demonstrated a positive capability of detecting EMRIs, at least if their signals are similar in complexity to the kludge waveforms used in this challenge [4]; however, the prospects for accurate parameter estimation are still uncertain, and a good focus for further challenges. |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | binaries of spinning MBHs. It will also include two new classes of signals: an isotropic primordial GW background and bursts from the cusps of cosmic strings. Between July and Dec 2007 we are also running Challenge 1B, a repeat of Challenge 1 conceived to provide a softer entry point for research groups new to the MLDCs. |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | have matured to the point where interested parties can use them to generate a va- riety of data sets. This enables a wealth of interesting side investigations, such as the studies of the LISA science reach that are now being undertaken by the LISA Science Team. To obtain more information and to participate in the MLCDs, see the official MLDC website (astrogravs.nasa.gov/docs/mldc) and the task force wiki (www.tapir.caltech.edu/listwg1b). |
Processed_Report_on_the_second_Mock_LISA_Data_Challenge.txt | SB, EKP, and JTW’s work was supported by the German Aerospace Center (DLR) and the Max-Planck Society. MB acknowledges funding from NASA Grant NNG04GD52G and support from the NASA Center for Gravitational Wave Astronomy at University of Texas at Brownsville (NAG5-13396). NC was supported by NASA Grants NNG05GI69G and NNX07AJ61G. DB and SF acknowledge funding from NSF grant PHY-0601459 and the LIGO Laboratory. JC’s, CC’s and MV’s work was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under contract with the National Aeronautics and Space Administration. JG acknowledges support from St Catharine’s College, Cambridge. IM would like to thank the Brinson Foundation, NASA grant NNG04GK98G and NSF grant PHY-0601459 for financial support. RP’s work was supported by the Max-Planck Society. MV was supported by LISA Mission Science Office and by JPL’s Human Resources Development Fund. LW’s work was supported by the Alexander von Humboldt Foundation’s Sofja Kovalevskaja Programme, funded by the German Federal Ministry of Education and Research. |
Processed_A_high-resolution_gridded_inventory_of_coal_mine_m.txt | using satellite observations to asses coal mine emissions (Varon et al., 2020, Sadavarte et al., 2021). |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | It is widely believed that chiral symmetry is spontaneously broken at zero temperature in the strong coupling limit of staggered fermions, for any number of colors and flavors. Using Monte Carlo simula- tions, we show that this conventional wisdom, based on a mean-field analysis, is wrong. For sufficiently many fundamental flavors, chiral symmetry is restored via a bulk, first-order transition. This chirally symmetric phase appears to be analytically connected with the expected conformal window of many- flavor continuum QCD. We perform simulations in the chirally symmetric phase at zero quark mass for various system sizes L, and measure the torelon mass and the Dirac spectrum. We find that all observables scale with L, which is hence the only infrared length scale. Thus, the strong-coupling chi- rally restored phase appears as a convenient laboratory to study IR-conformality. Finally, we present a conjecture for the phase diagram of lattice QCD as a function of the bare coupling and the number of quark flavors. |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | Here, we relax the demand that results should be obtained in the continuum limit. On a coarse lattice, long-distance properties can be studied more economically. While such properties may differ from those of the corresponding continuum theory, it is still instructive to consider the possible existence of an IRFP for a discretized lattice theory. The phase diagram of SU(Nc) gauge theory with N f fundamental fermions, as a function of N f and the bare gauge coupling, has been predicted in the celebrated Ref. [3]. It is important to confront these predictions with uncontroversial numerical evidence. Therefore, we start our investigation by considering the strong coupling limit, where the lattice is maximally coarse.2 The conventional wisdom for strong coupling QCD with staggered fermions is that chiral symmetry always remains broken at zero temperature, regardless of the values of N f and Nc. This belief is based on mean- field analyses performed in some of the earliest papers on lattice QCD. In particular, it was shown in [4] that at leading order in a 1/d expansion, the chiral condensate has a value independent of N f and Nc, and (cid:1). Chiral symmetry may be depends only on the number d of spatial dimensions, (cid:104) ¯ψψ(cid:105) = restored by increasing the temperature T ,3 but will never be restored at T = 0. Since naively mean-field theory is expected to work well when the number of d.o.f. per site is large, there was no reason to doubt this result. Besides, it is in accord with the intuition that the gauge field is maximally disordered in the strong-coupling limit, and the disorder drives chiral symmetry breaking. On the other hand, one might expect the above disorder to be modified by dynamical fermions, which have an ordering effect. Indeed, the loop expansion of the determinant shows that the fermionic effective action Seff = − log det( /D + mq) starts with a positive plaquette coupling ∆β , proportional to 1/m4 q for heavy quarks [6]. Clearly, for N f flavors, Seff ∝ N f , and hence ∆β ∝ N f . This plaquette term suppresses fluctuations in the gauge field, which suggests that chiral symmetry restoration might take place for sufficiently large N f . |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | Figure 1: The chiral condensate, left: at strong coupling, β = 0, in the (N f , amq) plane, for 44. Right: at amq = 0.025 in the (N f , β ) plane, for 44. We have compared with larger volumes [13] and find that the phase transition remains strongly first order at weaker coupling. The contour plot indicates the qualitative behaviour of the phase boundary, extending smoothly to smaller N f at weaker coupling. |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | Having established an N f -driven phase transition in the strong-coupling limit, we may consider its impact on the lattice theory at non-zero lattice gauge coupling β as well. Since the transition is strongly first order, it has to persist for some range in β at least. In fact, we find a smooth variation of the N f -driven transition with β at a given small quark mass amq = 0.025, as shown Fig. 1 (right). The transition extends to weak coupling, at least to β = 5, and remains strongly first-order. Thus, it is plausible that this transition, which separates a chirally broken (small N f ) and a chirally symmetric (large N f ) phase, persists all the way to the β → ∞ continuum limit, where it is to be identified with ∗ between the chirally broken and the IR-conformal, chirally symmetric phase. the transition at N f = N f In other words, our chirally restored phase may be analytically connected to the conformal window in the continuum limit, because we do not observe any additional non-analyticity as β is increased. This possibility motivates our study of the properties of the strong-coupling chirally symmetric phase, looking for tests of IR-conformality. |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | maximally disordered): the ordering effect of the dynamical fermions plays a dominant role, and the vanishing of the plaquette coupling is not associated with special properties. |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | Figure 2: Left: The torelon mass mT (L) multiplied by L versus L for N f = 56 (for anti-periodic b. c.), which is constant for large enough L. Right: The running coupling g(L) defined via the temperature-dependence of the Debye mass, which is identified with the torelon mass, for N f = 56 and 96. For each N f , the curve is a fit to a constant plus (a/L)2 corrections of the 4 largest volumes. The larger N f has a smaller coupling. |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | Figure 3: The integrated eigenvalue density. Left: comparison of N f = 0 (quenched) with N f = 56 in the chirally restored phase, where only the latter shows a spectral gap. Right: The rescaled spectral gap, indicating 1/L scaling. 10 configurations are superimposed, variations in the spectrum are very small. |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | Figure 4: Left: conjectured phase diagram in the (β , N f ) plane. A single phase transition line separates the chirally broken phase from the chirally symmetric, IR-conformal phase. The thick dotted line indicates trivial theories. Right: alternative scenario, where the trivial theories extend to the area above N f = 11Nc/2. It is not favored by our measurements. |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | line starts at the point (β = ∞, N f = 33/2) where g∗ = g0 = 0. Its precise location depends on the chosen renormalization scheme. It is not associated with any kind of singularity of the free energy. |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | We have shown that for β = 0, contrary to common wisdom, there exists a strongly first-order, N f -driven bulk transition to a chirally symmetric phase. In the chiral limit, the transition occurs for c = 52(4) continuum flavors. This finding is in contrast to the mean-field prediction, whose failure N f can be traced back to approximations relying on N f being small. Clearly, the conventional, automatic association of the strong-coupling limit with confinement and chiral symmetry breaking is too naive. Furthermore, the chirally restored phase extends to weak coupling. |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | We have also shown numerical evidence that the β = 0 chirally restored phase of “large-N f QCD” is IR-conformal, with a non-trivial, N f -dependent value of the IR fixed-point coupling. Since we have not observed any evidence for an additional T = 0 phase transition as β is increased, we speculate that the strong coupling chirally symmetric, IR-conformal phase is analytically connected with the continuum IR-conformal phase. |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | effect of fermions also is generic. So we do expect an N f -driven bulk transition, generically of first- order. Actually, such a transition was observed for Wilson fermions in Ref. [9]. A first-order transition to a chirally broken phase as β is reduced at fixed N f has been observed many times for various lattice actions [10]. If the first-order nature persists all the way to the continuum limit, then walking dynamics will not be observed, and the transition to the conformal window will be characterized by “jumping dynamics”, as proposed by Sannino [11]. |
Processed_A_surprise_with_many-flavor_staggered_fermions_in_.txt | We are grateful for stimulating discussions with P. Damgaard, L. Del Debbio, A. Hasenfratz, A. Kovner, A. Patella, K. Rummukainen, F. Sannino, K. Splittorff, B. Svetitsky and R. Zwicky. Compu- tations have been carried out on the Brutus cluster at the ETH Zürich and on a small cluster in the Sejong University physics department. S. K. is supported by Korea Foundation for International Cooperation of Science & Technology (KICOS). W. U. is supported by the Swiss National Science Foundation under grant 200020-122117. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | modelling of coastal waters. For convenient derivation of LCS diagnostics, structured grids are commonly used. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | well as validated outputs of a hydrodynamic model of Moreton Bay, Australia, on unstructured grids are used. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | The work examines the sensitivities of applying Lagrangian coherent structures (LCSs) diagnostics for coastal waters with complex boundaries. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | LCSs are robust to the errors from interpolation schemes used for unstructured to structured grid velocity data conversion. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | Additive random errors in the order of 1-10 % cause a break down in the continuity of ridges of maximum finite time Lyapunov exponents and closed orbit elliptic LCSs. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | fluid flows and a way to organise material transport by identifying key material lines [11]. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | and large water bodies to understand a range of problems [16]. For example: Bettencourt et al. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | meandering jet can be used to investigate many coastal and open ocean flow fields [28,35]. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | where x and y are along the jet and across the jet horizontal coordinates, respectively [28]. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | and has its major opening to the ocean of approximately 15 km on the northern side (Fig. 3). |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | Fig. 3: Moreton Bay (a) map of shoreline and (b) bathymetry (Yu et al., 2016). |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | the far-field areas, a relatively coarser grid resolution was used (i.e., 100m to 500 m) (Fig. 3b). |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | description of the spatiotemporal variation of the flow field in Moreton Bay is discussed in [6]. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | and turbulent flows as a criterion to reveal the hidden structures in fluid flow [25]. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | the elliptic LCS in this study was performed using scripts modified from the Barrier Tool [49]. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | from the analytical velocity field grid data where the resolution of the grid was the same. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | noise. The magnitude of the noise varies with the standard deviation of the true velocity field. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | rotating vortices and is selected to represent the largest scale of oscillation in this flow field. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | Fig. 5: Analytical kinematic (double gyre and meandering jet) forward FTLE fields for two different grid resolutions (RU/RS) (a) high resolution (0.246), (b) low resolution (54.94) and (c) cross section of FTLE as a function of x location at y = 0.5 for (i) double gyre and (ii) meandering jet. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | resolutions (high, R = 0.246 and low, R = 54.94) to examine this effect on the results of FTLE. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | Fig. 6: Forward FTLE fields (colour bar) of double gyre interpolation schemes (linear, cubic, biharmonic and natural) for unstructured/structured grid resolutions (R = RU/RS): (a) R = 0.246 and (b) R = 54.94. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | Fig. 7: Forward FTLE fields (colour bar) of meandering jet interpolation schemes (linear, cubic, biharmonic & natural) for unstructured/structured grid resolutions (R = RU/RS): (a) R = 0.246 and (b) R = 54.94. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | Fig. 8: Interpolation schemes (linear, cubic, biharmonic and natural) of highest and lowest grid resolutions for (a) double gyre and (b) meandering jet. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | Fig. 9: Cubic forward FTLE field PDF for different grid resolution of (a) double gyre and (b) meandering jet. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | resolutions in Fig. 9. The cubic interpolation scheme for both kinematic models was used. Fig. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | Fig. 11: RMSE of FTLE for different grid resolutions corresponding to four interpolation schemes (linear, cubic, biharmonic and natural) of the double gyre & meandering jet. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | Fig. 12: Forward FTLE for the total domain of Moreton Bay with the analysis of biharmonic Interpolation Scheme. Rectangle shows region used to obtain resolution, R. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | Fig. 13: Cubic forward FTLE calculation for different resolution of Moreton Bay (specific region) (a) x location at y = 0.5, (b) probablity density function (PDF). |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | the error. Otherwise, the wrong estimation of LCSs ridges and locations may arise in the result. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | Fig. 16: Forward FTLE field for double gyre (left) and meandering jet (right); (top) True velocity field, i.e. k = 0; and (bottom) Degraded velocity field k = 0.5. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | Fig. 17: Noise effect on the mean and maximum of the positive FTLE field for the double gyre (DG) and the meandering jet (MJ) and Moreton Bay (MB). |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | was found that the FTLE absolute error peaks near the ridges of the maximum FTLE values. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | The noise effect on the mean and maximum of the positive FTLE field are presented in Fig. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | best captured the closed loops of the vortical gyre structures in the double gyre flow field. Fig. |
Processed_Sensitivity_and_robustness_of_Lagrangian_coherent_.txt | resulting from grid resolution affects both the location and the magnitude of the FTLE fields. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Abstract. RoboCup Junior is a project-oriented educational initiative that sponsors regional, national and international robotic events for young students in primary and secondary school. It leads children to the funda- mentals of teamwork and complex problem solving through step-by-step logical thinking using computers and robots. The Faculty of Engineer- ing and Built Environment at the University of Newcastle in Australia has hosted and organized the Hunter regional tournament since 2012. This paper presents an analysis of data collected from RoboCup Junior in the Hunter Region, New South Wales, Australia, for a period of six years 2012-2017 inclusive. Our study evaluates the effectiveness of the competition in terms of geographical spread, participation numbers, and gender balance. We also present a case study about current university students who have previously participated in RoboCup Junior. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | The National Innovation and Science Agenda [5] is the Australian government’s initiative to improve and promote technologically related fields of commercial, industrial, and technical skill development for Australian citizens with a compo- nent focusing on the preparation of young school-aged students for studies related to the fields of Science, Technology, Engineering, and Mathematics (STEM). This component has been recognised as the next step in the evolution of the Australian education system. It is understood that the next generation of grad- uating students will have to be “STEM-ready” to cope with the challenges of a future technologically advanced and internationally competitive workforce. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | mathematics anxiety [13]. Students in general should be encouraged at an early stage to take intellectual risk in order to gain life-skills that could be of value for a STEM-related career path [2]. For students, pathways into a STEM related field can be increased by diversifying opportunities and options, so that there is a higher probability of attracting their attention. They could start, for example, with programming websites or building electronic components. In order to help students to access STEM, it is important to explain practical applications and give STEM a purpose. It also should be made clear that mathematics consists of many different disciplines and that they may require very different ways of thinking. There are different options within STEM and similarly within the general area of mathematics, e.g., not everyone who is talented in geometry and visualisations may also be good at memory and number tasks. With these critical thoughts in mind, a STEM-ready workforce has the potential to advance many different aspects of technology. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | One aspect of an advanced technology can be found in the field of robotics. Many STEM-related fields and skills are required to develop an autonomous robot. These include sound knowledge of the fundamental concepts of science and mathematics as taught at school. These are also the basis to a successful development of the practical skills required by professional engineers. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Similarly as the Personal Computer (PC) and the Internet had revolutionary impact on our culture, now mobile devices and robots are predicted to be basis of the next technological explosion. Hence, it is important to encourage young students to consider gaining skills in professions related to robotics or to pursue a other career paths that also can lead to a technologically skilled future, i.e., a “STEM-ready” future. For the Hunter region in New South Wales (NSW), Australia, RoboCup Junior [10] is the only annual robotics event that targets young students to actively compete and perform as a team. RoboCup Junior is a project-oriented educational initiative that sponsors regional, state, national and international robotic events for young students, with the goal to encourage the next generation to pursue and take an interest in scientific and technological fields. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | The subsequent sections show how RoboCup Junior served as a platform for community engagement and for promoting STEM in the Hunter region. By detailing demographic information about the Hunter region it highlights the importance and impact of RoboCup Junior. The results section provides quan- titative measures derived from data collected from RoboCup Junior events over the past 6 years. Then a case study of current University of Newcastle students who have previously participated in the competition is presented. The penul- timate section discusses the importance and roles of several stakeholders that collaboratively supported RoboCup Junior in the Hunter region and how this led to one of the most successful regional initiatives of its kind in Australia. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | RoboCup (est. 1997) is an international competition that fosters research in robotics [8], and the advancement of artificial intelligence within a competitive environment. RoboCup has seen a globally increasing trend in the past decade, see Fig. 1. The goal of RoboCup, in the near future, is to have designed and pro- grammed a team of bipedal humanoid autonomous soccer playing robots, to win against the human world champion soccer team [12]. This goal is yet to mature, and may require some generations of research to achieve, and hence we have RoboCup Junior; the establishment of the next generation of “technologists”, with a focus on robotics. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Fig. 1. The number of participants who have attended the RoboCup International tournament since its inception [12]: There is a strong linearly increasing trend (R2 > 0.90) over time with the number of people globally participating in this tournament. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | RoboCup Junior is designed to introduce primary and secondary school- aged children to the fundamentals of teamwork and complex problem solving by employing step-by-step logical, rational processes using computers (robots) as a tool to complete a set task. The main objective of RoboCup Junior is to encourage the next generation to pursue and take an interest in scientific and technological fields; to cultivate their interests through a hands-on approach in robot design and creation using platforms including, but not limited to, Lego Mindstorm educational kits. Students are invited to compete in three distinct disciplines; soccer, dance, and rescue. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | With the RoboCup Junior initiative, it is possible to create an environment of light-mindedness, experimentation, fun and teamwork that inspires and educates students to expand their horizon through STEM experiences. In this context, there are countless opportunities to establish links to other associated STEM disciplines. It is important that students feel respected as individuals and that they have, at an early stage, access to demonstrations and practical hands-on aspects of STEM careers in a broad manner where they can explore their own career goals. This is one of the key and defining ideals of RoboCup Junior in the Hunter region, NSW. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | The Hunter region, NSW, resides approximately two hours north of Sydney and has a substantial rural demography as well as large urban population cen- tres in Newcastle and Lake Macquarie. Although, the Hunter region has been noted to be an innovation hub, e.g. Newcastle as “Smart City” [7], where new smart technologies are being developed as applied solutions to the problems of the world today, the general population includes negatively skewed low social economic status (SES) indicators, when compared to the state’s capital, Sydney. For example, Higher School Certificate (HSC) completion rates in the Cessnock Area, within the Hunter region, are with 44% substantially lower than the NSW average of 75% [4]. These low-SES indicators have led the organisers of RoboCup Junior in the Hunter to follow an approach that maintains the core rules of the competition while incorporating additional coaching to promote participation. This allows children to have an attitude of “having-a-go”, to have fun, and to enjoy themselves while avoiding anxieties associated with STEM subjects and while subconsciously having a positive experience with STEM and gaining im- portant skills required for a potential career path in STEM. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | A career path in STEM does not require direct entry into a university de- gree, as there are many different pathways into a STEM-related career. How- ever, traditional entry into a university STEM-related degree has generally been perceived to be the fastest arrangement to refine skills, achieve, advance and progress in a competitive STEM workforce. For this reason, the following results section presents information obtained in a case study of currently enrolled stu- dents (with their permission) who were past participants of RoboCup Junior, Hunter. This case study together with quantitative results recorded over the past six years corroborates the view that the Hunter RoboCup Junior initiative had substantial positive impact on driving STEM education in the Hunter Region. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Over the past six years, 2012 to 2017 (see Fig. 2) there has been a general growth in the number of students, teams, as well as schools, with a total of 1443 student participants in the Hunter Region RoboCup Junior competition. In 2015 the ME program (Section 4.2) was not able to support the competition as usual. While in 2017, the date of the competition was significantly earlier then previous years. These factors caused a temporary decline in participation. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Fig. 2. Development of RoboCup Junior in the Hunter Region over the past six years (2012-2017 inclusive). There was a general increase in the number of students, teams, and schools. The spatial coverage of the participating schools entering the competition also increased. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | fraction can be considered to be relatively high, given that only 13% of all engi- neers are female [6]. As the geographical representation of participating schools in Fig. 2 shows the geographical distribution of schools participating in the com- petition increased as the initiative matured over time. Participating schools were from the Central Coast in the South up to Camden Haven in the North. In ad- dition some schools travelled up from the Sydney Region to attend the Hunter tournament in 2014. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | With respect to the disciplines offered at RoboCup Junior, the local Hunter region competition comprises all available disciplines that are currently accessible at both state and national tournaments. As a result, the discipline participation distribution follows the identical ranking in proportion with the difficulty of discipline. The ranking from easiest to hardest is as follows; rescue, dance, and soccer. The data from our largest local competition, in 2016, is shown in Fig. 3. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Fig. 3. Distributions of registered participants for 2016, RoboCup Junior, Hunter Re- gion: Top Left, a histogram representing the number of teams registered per discipline. Top Middle, a histogram representing the number of participants by age. Top Right, gender distribution for the competition. Bottom, a histogram representing teams reg- istered by school. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | who are attending high school, or are between 13 and 18 years old. Advanced participants who have participated in at least two tournaments of rescue in previous years compete in open rescue. This hierarchy of sub-categories allows not only for an increase in difficulty, but for different challenges for the different categories of ages. The rescue discipline is very structured, and the task is set by the rules of the competition. This structure was the motivating factor that drove its popularity, with 80 (14 primary, 68 secondary) teams registered to participate in this discipline in 2016. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Like rescue, RoboCup Junior dance also has three sub-categories; primary, secondary and open, with similar age restrictions. This category leaves many open-ended opportunities and flexibility that allow students to explore and ex- periment with different implementations for their performance. This openness makes it somewhat further challenging when compared to the rescue discipline. Hence, the number of participants in RoboCup Junior dance is smaller than in the rescue category. The number of teams participating in each sub-category is fairly distributed, with approximately 20 teams for primary dance, and 14 teams for secondary dance, with one team for open dance. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Lastly, in RoboCup Junior soccer, the students are required to build and program a small robot team to autonomously play soccer. It is essential for the robots to autonomously adapt to the environment while playing soccer by the rules. This discipline is the utmost challenging of the disciplines offered at the local Hunter regional tournament. However, it is also the most rewarding of all disciplines, as it allows the students to program an autonomous agent, with a requirement for multivariate control algorithm be used. The other disciplines can be, but are not necessarily, much simpler. Due to its perceived difficulty, participation in the soccer discipline has dwindled throughout the history of our local tournament. RoboCup Junior soccer, like RoboCup Junior rescue, con- sists of three sub-disciplines; GENII, lightweight, and open. The sub-category of GENII only allows Lego Mindstorm NXT or EV3 Robots to compete, whereas lightweight allows modified self-built robots to be used. This includes Arduino based hardware under a certain weight and size limit. The open sub-discipline allows any hardware to be used in the build of robots, which could be of any weight, but within a size limitation. For 2016, we saw the largest cohort, with 18 teams in soccer discipline total (9 GENII, 7 Lightweight, and 2 Open). |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | A report released in 2015 by the Australian Industry Group, explains a set of key recommendations that can be implemented in order to further encourage school students to study and explore future careers in STEM [2]. A particular key recommendation highlights the need for teachers and schools to be further supported in harnessing students’ interest, which is the primary aim of RoboCup Junior and the number of community partnerships involved. Burgher et al. [3] suggest that a hands-on and practical approach to education, results in students becoming more aware of the conceptual theory rather than students being tra- ditionally educated in the format of lectures and traditional classroom exercises. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Exploring this suggestion this study has taken the shape of a questionnaire to current university students (n=3), who have competed in the tournament in the past. The purpose of investigating this qualitatively was to understand what key factors associated with their participation in RoboCup Junior led the students to develop a deeper appreciation of STEM and finally resulted in their decision to pursue a career in STEM. To begin, all participants had indicated in the ques- tionnaire that they had been encouraged to participate in RoboCup Junior by their schools and teachers. This exemplifies how critical and significant partner- ships formed between the organising committee and schools are. Three prevalent themes in the responses consisted of the following areas; Problem solving, Con- ceptual thinking and Rewarding. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Problem Solving: Responses indicated that students had found the nature of the problems presented in RoboCup Junior to be of a “broad nature”, which provided further incentive to aid the design of a solution they were presented with during the competition. A critical skill that has been cited is that students had to assess the abstract problem independently which leads into the second theme. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Conceptual thinking: In alignment with Burgher et al. [3] RoboCup Junior being a practical activity, allowed students to gain an additional direct approach to conceptual learning. Results from the questionnaire indicated that the critical skills gained were of a separate nature to a school curriculum. Students also indicated that open-ended problems allowed them to focus on concepts rather than on textbook knowledge. Students also suggested that as a result of it be- ing separate from a school curriculum it allowed focus to bridge gaps between abstract and practical nature. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Rewards: Within RoboCup Junior, students are encouraged to use technology to solve a given problem. The nature of responses to the questionnaires indicates that participants find the solutions to be the most rewarding and therefore one of the most encouraging aspects. As STEM is centrally focused around problem solving, students who experienced this during the competition found it further encouraging to seek employment within a career that offers that same sense of reward for solving a broad problem. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | The future of STEM in the Hunter region is deemed important by many STEM- related stakeholders of the local region. Several factors that have contributed to the success of the tournament are associated with the partnerships that have been developed with key stakeholders in the period 2012-2017. Some of these key relationships and their impact will be discussed in the following sub-sections. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | The Faculty of Engineering and Built Environment of the University of Newcastle has continuously been the main stakeholder of RoboCup Junior in the Hunter Region since the project’s re-inception in 2012. With the university acting as the host, the competition is held on campus at the university’s gymnasium, The Forum. The university is also the key supplier of human resources to organise and manage the competition. The faculty has supported the competition with expertise in management, in the form of faculty administrative staff. The faculty manages aspects such as registrations, budget, and covered the majority of costs to run the competition. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Technical aspects of the tournament were administered by members affili- ated with the NUbots, the Newcastle University RoboCup team. The NUbots are a senior RoboCup team and comprise several university students and aca- demics [1]. They competed in the Kidsize Humanoid League, and now in 2018, the TeenSize Humanoid League at RoboCup. They are part of the Newcastle Robotics Laboratory, situated in the Faculty of Engineering and Built Environ- ment. The NUbots have participated in RoboCup since 2002. They became world champions in the Standard Platform League using the Aldebaran NAO Robots, in 2008, and were world champions in the 4-Four-Legged League in 2006 using the Sony AIBO robots. This internationally well-recognised team brings over a decade of robotics experience to the local RoboCup Junior Hunter region com- petition. NUbot members are members of the committee, deliver workshops, and play a crucial role on the Hunter Region competition day in roles such as technical refereeing and judging. Over the past decade, the faculty has had a strong interest in community engagement. With a particular interest in low social-economical-status areas, the faculty has deployed intensive training pro- grams and funding for robotic kits at schools in areas such as, Raymond Terrace in Port Stephens, NSW. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | RDA Hunter’s ME Program has been a highly successful STEM outreach pro- gram that has delivered tangible outcomes in terms of student uptake of STEM- based subjects in upper secondary schools [11]. The ME Program in the Hunter region has supported running of the RoboCup competition whenever possible during 2012- 2014 and 2016. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | a result of the broader ME Program funding for local schools, it has delivered a substantial quantity of STEM equipment and training (e.g. professional learning for teachers and through the support of Robogals for schools). The hardware provided includes 3D printers, and of course, robotic kits that could be used as part of the RoboCup Junior competition. The 2016 ME Program has included a caveat for any school receiving Lego EV3 robots that they must compete in the RoboCup Junior, Hunter region competition. During 2016, there was a signifi- cant increase in the number of schools that received robotic kits as part of the ME program. During 2015-2016, over one hundred EV3 robots were provided to 22 local schools. As a consequence, there was a significant increase in registered participants for the local tournament in 2016. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Robogals is an international initiative aimed at promoting gender equality in the fields of STEM through the use of robots and robotic education. Volunteers of the initiative consistently visit different schools and perform their robots at local public events. In addition, they offer free short beginner classes in robotics in using the Lego NXT and EV3 Robots in many school classes. The local chapter of Robogals in the Hunter region is no exception. It consists of many enthu- siastic individuals, who are always ready to assist and share when required. The local chapter of Robogals initiative has worked closely with the RoboCup Junior Hunter Region Competition, since the inception of the local chapter in 2013. Robogals have recently signed a Memorandum of Understanding with the ME Program and BAE Systems Williamtown and have been working with ME Program high school and their feeder primary schools. The ME Program also provided 10 EV3 Robots to complement their fleet of NXT units. Volunteers of Robogals have sat on the organising committee for RoboCup Junior, Hunter re- gion, and have also assisted at the events with judging, and holding workshops on the competitions behalf while the competition was running. In addition, training material used to teach classes was shared between RoboCup Junior and Robo- gals, so that Robogals could concentrate on their goal to achieve gender equality in the fields of STEM. The Robogals initiative in the Hunter region is growing successfully. They have repeatedly reported that there are more schools on their waiting list then they can handle. The result of this partnership, and its growing success, can be seen in the increased female to male ratios (approximately 24% in Figure 3). It shows the number of females is relatively higher at RoboCup Ju- nior when compared to the number of females enrolled in an engineering course at a later stage, e.g., at university level. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | local schools, using a different style of robots than the standard Lego platform. Tribotix also partners with the national RoboCup Junior Australia committee in the development of state-of-the-art robotic educational kits. This includes, e.g., the DARwIn-MINI, for future use in a possible new Rescue league and a small humanoid league for RoboCup Junior. As more students start earlier with the competition, it would not be too long before these advancing students seek knowledge, information, and new hardware to fulfil their requirements. Tribotix has been a competent partner and helpful supplier throughout all years of the competition. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | Community support was vital for running the event. Support was supplied in terms of funding obtained from community grants, such as Orica (2014), AGL (2015), Newcastle Coal Infrastructure Group (NCIG) (2015), Newcastle City Council (2016), and the Kirby Foundation (2017). Without this funding, the competition itself could not have happened, and therefore no success could have been achieved. Members of the general community represented by teachers and parents of the participants were involved in all aspects of organising the com- petition. The success of the students comes directly from interacting with their mentors, some of which advise and attend monthly organising meetings which allow us to hear feedback and to incorporate and implement suggestions to make the competition run smoothly. Members of the community are an important part of the Hunter Region RoboCup Junior organising committee and have steered the competition to its current successful state. We acknowledge Mr. Jason Flood, Chair of Local Committee (all years, excluding 2014), for his commitment and extraordinary effort that added to the project’s success. |
Processed_RoboCup_Junior_in_the_Hunter_Region:_Driving_the_F.txt | With decreasing levels of participation in mathematics and science within Aus- tralian schools, winning students’ interest in the fields of STEM has become an uphill battle. Nonetheless, for the local region of the Hunter, the RoboCup Junior competition gained outstanding success. The partnership of RoboCup Ju- nior Hunter Region with the University of Newcastle, and other key stakeholders such as the RDA Hunter’s ME program, stands as a project that will trans- form the landscape for STEM education in the future. Success of the project to this point is reflected by the increasing number of student participants, a growing geographical distribution, and an improvement of gender balance. In addition, qualitative evidence of the positive influence on students participating in RoboCup Junior explains what impact the competition can play on students’ path to a STEM career. |
Processed_Gap_Formation_in_the_Dust_Layer_of_3D_Protoplaneta.txt | Abstract We numerically model the evolution of dust in a protoplanetary disk using a two-phase (gas + dust) Smoothed Particle Hydrodynamics (SPH) code, which is non-self-gravitating and locally isothermal. The code follows the three dimensional distribution of dust in a protoplanetary disk as it interacts with the gas via aero- dynamic drag. In this work, we present the evolution of a disk comprising 1% dust by mass in the presence of an embedded planet for two different disk configurations: a small, minimum mass solar nebular (MMSN) disk and a larger, more massive Classical T Tauri star (CTTS) disk. We then vary the grain size and planetary mass to see how they effect the resulting disk structure. |
Processed_Gap_Formation_in_the_Dust_Layer_of_3D_Protoplaneta.txt | We find that gap formation is much more rapid and striking in the dust layer than in the gaseous disk and that a system with a given stellar, disk and planetary mass will have a different appearance depending on the grain size and that such differences will be detectable in the millimetre domain with ALMA. For low mass planets in our MMSN models, a gap can open in the dust disk while not in the gas disk. We also note that dust accumulates at the external edge of the planetary gap and speculate that the presence of a planet in the disk may facilitate the growth of planetesimals in this high density region. |
Subsets and Splits
No saved queries yet
Save your SQL queries to embed, download, and access them later. Queries will appear here once saved.