nopperl/arxiv-image-text · Datasets at Hugging Face

dedup-isc-ft-v107-score float64 0.32 1	uid stringlengths 32 32	text stringlengths 0 32.5k	paper_id stringlengths 1 14	original_image_filename stringlengths 5 222
0.4261	f1f53c1758d14139b1b517e43967edae	Constraint equation (<ref>) for s_1\|_t=0=0, γ_0=0.1, w_c=2, t_c=25 for ω/m=0.32.	2012.10109	exampleConstraint.jpg
0.451006	d8fb29777ce5489ba748245d20feeb5b	RIS-NOMABC system model	2012.10111	Fig1_system_model.jpg
0.460933	7c05cdf9eb264290aa126400722d1290	The geometric interpretation of the manifold optimization algorithm	2012.10111	Fig2_MOP.jpg
0.411877	022186fcffd245678471ee1a36eba192	System sum rate versus the number of reflecting elements Q_ RIS, P_ T=35 dBm	2012.10111	Fig3_SumRate_Q.jpg
0.454336	3437f7e9ea7c4b26bfa7400012618850	System sum rate versus the transmit power P_ T, R_k^ min=1 bit/s/Hz	2012.10111	Fig4_SumRate_PT.jpg
0.40734	9460c45887ee46b79ffa0d66f1e20351	System sum rate versus the minimum QoS requirement R_k^ min, Q_ RIS=50, P_ T=40 dBm	2012.10111	Fig5_SumRate_Rmin.jpg
0.484634	e9769325b48045ea8c1211f1a4953dae	A CAD model of the lateral vibration attenuation system with piezo-elastic supports and a sectional view of one of the piezo-elastic supports, cf. <cit.>.	2012.10113	fig1.jpg
0.477549	441f140840f447fab7594b2a013f690e	Four different density estimates and as reference the data Y_1,…,Y_n indicated on the x axis.	2012.10113	fig2.jpg
0.469226	ff9542eec74844a7b6d5a49706eaaaa0	(a) Scanning electron microscopy image of the experimental device with false colors. Labels indicate source (S), drain (D), left and right tunnel gates (LTG, RTG) and plunger gate (PG). The Al shell is colored in green. (b) Longitudinal (left) and cross-sectional (right) cuts of the model used in the simulations: substrate (dark grey), InSb nanowire (orange), Al (green), ohmic contacts (yellow), dielectric (grey) and gates (blue). Conductance oscillations measured at zero bias voltage exhibit 2e peak spacings at B=0 (c) and 1e peak spacings at B=0.6 T (d).	2012.10118	figure1.jpg
0.422009	77cf94dc805b481e94683640adfbaedc	(a) Median peak spacing of Coulomb blockade oscillations as a function of magnetic field and gate voltage. Dark blue areas correspond to predominant 2e periodicity, light blue to 1e periodicity. For each pixel, the median is determined from a window of 20 mV in plunger gate voltage, corresponding to ≈ 20-40 conductance oscillations. (b) Peak spacing distributions for regions I, II, and III as labeled in panel (a). We attribute the presence of a residual 1e peak at low B in region I to the possible poisoning of the island <cit.> as well as to the occasional presence of subgap states <cit.>.	2012.10118	figure2.jpg
0.39965	2d8d05bb0f354e49a3907d56c77abaaa	(a) Quasiparticle energy gap E_min as a function of plunger voltage V_pg and magnetic field for the simulated island of length 1. We indicate regimes I, II and III as in Fig. <ref>. The energy scale is saturated at 40 because this is the estimated charging energy in the experimental device and thus the expected boundary at which the 2e→1e transition would start to occur. We note that this boundary is only weakly sensitive to the level of disorder used in the simulations, likely due to the short length of the wire <cit.>. (b) Bulk topological phase diagram indicating the bulk gap E_gap and the sign of the topological index 𝒬=± 1, both obtained via the simulation of the bandstructure of an infinitely long wire. Red regions are topological. Two topological regimes with large gap and small coherence length are marked by the dashed grey lines in both panels (a) and (b). (c) Electrostatic potential profiles in the nanowire cross-section for the three plunger gate values indicated by blue, orange and green bars in panels (a) and (b). (d) Magnetic field dependence of the lowest (red/blue) and first excited (gray) energy levels for three different plunger values. The left panel (blue) crosses a topological region of the phase diagram, while the two other panels (orange and green) correspond to topologically trivial regions.	2012.10118	figure3.jpg
0.437737	a06073845b7f4266bb5b3707d65b949e	(a) Coulomb blockade oscillations measured versus plunger gate and magnetic field in region II of the phase diagram. The measurement covers five pairs of even-odd Coulomb valleys (labeled by index i=1,…,5) in the field range indicated by the black arrow. (b) Field dependence of the even and odd peak spacings S_e,o (left y axis, in mV) and of the peak height asymmetry Λ (right y axis) for each pair of Coulomb valleys. Vertical dashed lines denote the linearly interpolated values of B at which Λ=0.5, corresponding to equal peak heights. These values of B closely match extremal points in S_e,o. (c) Peak spacing difference and peak height asymmetry as a function of magnetic field. Black crosses correspond to the values of B denoted by vertical dashed lines in panel (b).	2012.10118	figure4.jpg
0.436075	8caac266b93e41d09474524334a9cac6	Conductance versus bias voltage and plunger gate at B=0, showing 2e-periodic Coulomb oscillations around zero bias voltage. From the height of the Coulomb diamonds <cit.>, we estimate a charging energy E_c≈40.	2012.10118	supp_figure_coulomb_diamond.jpg
0.415329	620bbc7575d349f396d4107f942f32e4	Coulomb peak spacings and oscillation analysis, analogous to Fig. 4 of the main text, for an additional dataset measured in region II. In panels (b) and (c), data points at B=0.54 T are omitted since their valley identification is ambiguous due to the gate jump visible in panel (a). Here both tunnel gate voltages are set at -0.175.	2012.10118	supp_figure_coulomb_oscillations_I.jpg
0.460518	54349e7f46e445dd99bab1ef41efa3d0	Coulomb peak spacings and oscillation analysis, analogous to Fig. 4 of the main text, for an additional dataset measured in region II. Here V_LTG=-0.08, V_RTG=-0.3.	2012.10118	supp_figure_coulomb_oscillations_II.jpg
0.402962	0b6efecc593d4949b2d4ac42d0b0a5d0	Coulomb peak oscillations and peak spacing extraction for an additional dataset in region I, measured as a function of the tunnel gate voltage at a fixed value of the plunger gate voltage, V_PG=-1.4.	2012.10118	supp_figure_coulomb_oscillations_region_I.jpg
0.455073	b4dd2eba386c46dea773f82066fa124d	Coulomb peak oscillations and peak spacing extraction for an additional dataset in region III. We note that with this resolution in the conductance data, the even-odd regime is briefly visible in the field dependence of the peak spacing histograms in the right panel, around 50 mT. Peak spacing oscillations are instead not visible at higher fields.	2012.10118	supp_figure_coulomb_oscillations_region_III.jpg
0.451633	ee7a5b52af2d4201946375e2fd12ac9f	Measurement of the parallel critical field of the Al shell of the island via tunneling conductance. This measurement is performed by opening the left tunnel gate (V_LTG=2 V), while keeping the right tunnel gate in the tunneling regime (V_RTG=-2 V). The critical field is B_c≈ 0.8 T.	2012.10118	supp_figure_critical_field.jpg
0.421136	93963d9911b448f985a92841931de611	Energy gap as a function of plunger voltage and magnetic field in the simulated island with a band offset of -25 meV. Here the negative band offset corresponds to a depletion layer at the InSb/Al interface. In comparison to Fig. 3a, the transition region II seems very small or absent and region I directly transitions into region III. Due to the absence of a transitional region II, the depletion layer case is not promising for topological applications. We note that spatial fluctuations of the band offset are not captured in the simulation, but they may occur in experimental devices.	2012.10118	supp_figure_depletion.jpg
0.41443	339024b383874c31abfbbe1d58752c04	Energy gap as a function of plunger voltage at zero magnetic field for a band offset of (a) 50 meV and (b) -25 meV. We show the gap both in a clean infinite system, and in a finite system with and without disorder. Both the gap in a finite system with and without disorder and infinitely long system is shown. The dashed blacked line in the left panel most clearly identifies the three regimes of the proximity effect described in the main text: the curve of E_gap versus plunger gate shows two plateaus separated by one crossover region. The first plateau, with E_gap≈Δ_Al, is identified with region I. The second plateau, with E_gap = 0, is identified with region III. The crossover region is region II. Finally, the difference between the energy gap of the finite system and of the infinite system in region III is clearly visible.	2012.10118	supp_figure_gap.jpg
0.385818	d4cfde811a52462c97960ea544e9d738	Gate versus gate conductance maps, taken at zero bias voltage, illustrating the tunnel gate compensation implemented during the phase diagram measurement of Fig. 2 of the main text. Left panel: Right tunnel gate versus plunger gate conductance map, measured at zero bias voltage, In the phase diagram measurement, the left tunnel gate was kept fixed at V_LTG=-0.03, while the right tunnel gate was varied together with the plunger gate following the red dashed line, in order to remain close to the tunneling regime throughout the measurement. Right panel: Same gate map but taken versus the left tunnel gate voltage, in which case no compensation was needed.	2012.10118	supp_figure_gate_vs_gate.jpg
0.443074	c30ca03a451346f094ed1055c042a75e	Energy gap E_min as a function of plunger voltage and magnetic field in the simulated island with length 1, for two different values of mean free path l_e. A single disorder realization is shown. We find that with increased disorder strength, and decreased mean free path, the boundary between the dark blue and white regions of the parameter space, i.e. the boundary at which E_min first vanishes, becomes more and more smeared due to disorder broadening of the individual bands.	2012.10118	supp_figure_mfp.jpg
0.4313	a99eb13569464f0588b408a525524576	Energy gap as a function of plunger voltage and magnetic field in the simulated island with the orbital effect of the magnetic field turned off in the simulation. In comparison to the left panel of Fig. 3 of the main text the energy gap is not suppressed until much larger magnetic fields. Furthermore, the transition is strongly dependent on plunger gate voltage for voltages corresponding to region III in Fig. 3 of the main text.	2012.10118	supp_figure_no_orbital.jpg
0.460519	84022cb7c112442797f628e84ef09c66	A second phase diagram measurement, executed on the same island device measured in Ref. <cit.>. This device also shows three characteristic regions as in Fig. 2 of the main text, although the transition between region I and III is more abrupt. This difference may be due to a difference in the lever arm of the gate, or to sample-to-sample as well as local fluctuations in material parameters such as the band offset between InSb and Al. See for instance Fig. <ref> for a simulation in the presence of a negative rather than a positive band offset (deplation layer rather than accumulation). Also, we note the larger value of B^* in region III compared to the phase diagram of Fig. 2 of the main text, which we attribute to the nanowire having a smaller diameter.	2012.10118	supp_figure_phase_diagram.jpg
0.410868	5bee50446a1a495386ae2a36889d1a08	Standard deviation of the peak spacings as a function of magnetic field and plunger gate. Regions I, II, III are indicated in analogy to Fig. 2 of the main text. The larger fluctuations occurring at B≲ 0.65T in regions II and III are an indication of the even-odd regime of Coulomb oscillations, distinguished from the more regular 1e regime occurring at B≳ 0.65T.	2012.10118	supp_figure_std_spacings.jpg
0.415814	35356ed91bca49ce98b8e6cc1b48774b	(a-b) Large-range conductance measurement in the negative plunger gate voltage (region I of the main text). Here the right tunnel gate is varied, with the left tunnel gate kept fixed at V_LTG=-0.03. Panel (a) shows a selection of linetraces from panel (b). (c) Corresponding peak spacing histogram. The 2e-1e transition field is not affected by the compensation in tunnel gate voltage and fluctuations in the background conductance.	2012.10118	supp_figure_tg_measurement_region_I.jpg
0.44229	6ff424f31e434ea9805311134655eaf7	(a- b) Large-range conductance measurement in the positive plunger gate voltage (region III of the main text). Here the right tunnel gate is varied, with the left tunnel gate kept fixed at V_LTG=-0.03. Panel (a) shows a selection of linetraces from panel (b). (c) Corresponding peak spacing histogram. As in the previous Fig. <ref>, the 2e-1e transition field is not affected by the compensation in tunnel gate voltage and fluctuations in the background conductance.	2012.10118	supp_figure_tg_measurement_region_III.jpg
0.405087	73fbe67296bc45e1a00c7838c7d82a9e	Topological coherence length as a function of plunger voltage and magnetic field in the bulk wire. The topological phase boundaries from the middle panel of Fig. 3b of the main text are shown as light grey lines. Only two topological phases at the lowest plunger values have a coherence length that is significantly shorter than the island length.	2012.10118	supp_figure_xi.jpg
0.421883	dc569871e4104c238340aba418fae097	Superfluid density ρ_s (open circles) and structure factor S(Q) (open squares) as functions of t for (a) μ=4.0 and (b) μ=3.2. Here V=4 and L=24. Both quantities show the signatures of first-order phase transition from the ICS to the SF states.	2012.10121	ICS_SF_24x24.jpg
0.46964	77abeb9cabe84395a7e9877663c96b59	Illustrations of domain wall motion. (a) Removing a column of bosons. (b) Shifting the right half of the lattice costs no extra potential energy but gains kinetic energy due to the fluctuation of the domain wall (red line). (c) Multiple domain walls. (d) QFS state with a domain wall density ρ_D = 1/2.	2012.10121	fig_domain.jpg
0.439808	0c49186f7d9d42a19b140291efadd91d	Ground-state phase diagram with V=4 obtained from QMC calculations after extrapolating to thermodynamic limit. The dotted lines are the phase boundaries predicted by the domain wall analysis. The insets show the CBS and the QFS lattice structures. Here V'=1 as the energy unit.	2012.10121	fig_mu_t.jpg
0.490634	d426455a0a27425d9515feafe83553b3	Hysteresis of the structure factors S(Q) for the cases of (a) μ=4.0 and (b) μ=2.0, which correspond to the 1/3-filling plateau state and the 1/4-filling QFS state respectively. Here V=4 and L=24. The insets show the double-peak feature of S(Q) around the transitions.	2012.10121	hist_T.jpg
0.463205	cfd0b9c3b2dd4f4ea2eec621baf708bd	Boson density ρ (circles) and superfluid density ρ_s (squares) as functions of V' with V=4 for (a) μ=4.0 and (b) μ=4.6. Here L=36 and V=4.	2012.10121	n_rhos_Vd_36x36.jpg
0.46347	f6147771bc0c4511a9e10feb871fd7e8	Order parameters as functions of μ with t=0.4 and V=4. Upper panel: the particle density ρ as a function of μ. The fractional numbers are the corresponding densities of the plateaus. Solid (Open) circles represent the data for L=36 (L=24). Lower panel: superfluidity ρ_s (filled squares) and structure factors S(Q) (open circles) as functions of μ. The corresponding ordering wave vectors of the data are, from left to right, Q=(2mπ/L, π) with m=L/4, (L/4)+1, ..., L/2. For simplicity, the structure factors for the ordering wave vectors Q=(π, 2mπ/L) are not shown. Note that the data of S(π,π) is reduced by five times.	2012.10121	n_sq_mu_36x36.jpg
0.438802	7bce316badc74dac9754a2dfc3c8f36a	Domain wall density ρ_D as a function of μ for t=0.4 (upper panel) and t=0.2 (lower panel). The red solid lines are analytical predictions given by Eq. (<ref>). The insets show the fittings of the interaction energy f(ρ_D) to a power-law function Aρ_D^α for each case. Here V=4 and L=24 are taken.	2012.10121	wall_den_24x24.jpg
0.412704	f2babc7744724c9dbb0386765df09d42	The left (right) panel shows the East (North) parallax signature, with proper motion removed, for 6.7-GHz methanol maser G041.22-0.19 which is characterized by 4 background quasars and 25 maser spots, for 100 quasar-maser pairs. The final parallax, 0.113 ± 0.022 mas, is determined with the âfake quasarâ method <cit.> and is shown as the thick solid line. Red, yellow, blue and green dashed lines denote individual fitting results for the four background quasars <cit.>.	2012.10130	Spiral1.jpg
0.530351	124815f6853d495e9516e853622df5ca	The conceptual image overlaying the outlines of the four spiral arms of the Milky Way. The Galactocentric coordinate system is divided into four quadrants, as indicated by yellow dashed lines. Quadrant numbers are indicated in four corners. The Galactic center (red asterisk) is at (0, 0) and the Sun (red Sun symbol) is at (0, 8.15) kpc. The outlines of four arms are Norma-Outer arm (blue); Scutum-Centaurus-OSC arm (yellow); Sagittarius-Carina arm (green); and Perseus arm (white). The dotted lines are the widths of the four arms, defined as enclosing 90% of their distance indicators <cit.>.	2012.10130	Spiral2_small.jpg
0.521817	edefe51e3d8b4f80b3f4db84e6311969	A conceptual picture overlaid with the 2607 young objects <cit.> and 199 masers <cit.> shown as yellow points.	2012.10130	Spiral3_v2_s.jpg
0.410238	75c83eb64f3944fd9f29bf99821d7372	The Galactic boxy bulge and long bar reconstructed by combining various NIR surveys. Top: the inner Galaxy in solar perspective. Middle: Face-on projection of best-fitting RCG star count model. Bottom: side-on view of the bar/bulge along the intermediate axis. Adapted from <cit.>.	2012.10130	Wegg_2015.jpg
0.478149	ed31d9e2307b46c4ab619cdb6053f8e8	Top: the conceptual picture of the Milky Way with its bar, four major spiral arms, a subsidiary Local arm, and 3-kpc arms. This artistic visualization also contains various important components such as gas, dust, molecular clouds and filaments, HII regions, young OB stars, and young star clusters. The Sun is marked with a circled red dot in the Local arm. The bar angle between the bar major axis and the Sun-Galactic center line is around 25 - 30^. The Galactic rotation is in the clock-wise direction. (Credit: Xing-Wu Zheng & Mark Reid BeSSeL/NJU/CFA). Bottom: the Milky Way seen in the infrared band by Diffuse InfraRed Background Experiment (DIRBE) on board NASA's COBE satellite (left-right flipped from the original image to be more consistent with the face-on picture).	2012.10130	complete_spirals.jpg
0.447232	1d3e820e089c4048b3494e7d84022eae	Pegasus graph. Blue circles represent qubits, and lines connecting qubits represent connections between them.	2012.10135	300_pegasus.jpg
0.392396	1dcdbd50508d47b6bcd5442d94f795a2	Bit-Flip Heuristic Algorithm (BFHA)	2012.10135	alg1.jpg
0.42972	e2c16e7f13ce4662a5180a089a76b35d	The numbers of one-hot constraints violated in 10000 solutions obtained using the Ohzeki method with D-Wave Advantage. Vertical axes show the number of solutions, and horizontal axes show numbers of violated one-hot constraints. No problems had feasible solutions for all sizes.	2012.10135	fig2.jpg
0.410306	0c402b16aa344d87bf8785191d6bd09f	QAP optimization	2012.10135	sub_alg2.jpg
0.44567	6b72738e6efd476ea2e62a4a90606451	(a) Schematic of the setup. A linear motor is used to impact a disc on water surface with constant velocity. Using total internal reflection (TIR), the water surface can be used as a mirror, and its behaviour observed when subjected to deflections. A load cell is installed along the rod to measure the overall force experienced in the vertical direction. (b) Design (upper figure) and dimensions (lower figure) of an 80 mm wide disc on whose surface local impact pressures are measured. The two identical sensors have a circular sensing area with a diameter of 5.5 mm. Their mounting locations - at the disc's center, and close to its edge, are shown in panel (b).	2012.10137	fig1.jpg
0.441138	64b13a433cf0426da8648dc4ffee0ed8	Time evolution of the diameter D_air of the retracting air film at low impact velocities for different disc diameters D and impact velocities V. Note that the retraction velocity V_retr≈ 0.38-0.42 m/s appears to be independent of D and V.	2012.10137	fig10.jpg
0.415611	1ed208c94cb244e18a0ad57c564644e0	Time interval Δ t_punct between the first contact time of the disc and the water surface and the appearance of the puncture in the center of the air film, as a function of the impact velocity V for three different disc diameters. The dashed lines are best fits to the functional form Δ t_punct = A/V^2, with A constant.	2012.10137	fig11.jpg
0.470444	e90f7298b05942fc9bb8e43e4c3dc8ef	The trapping of an air film on a water-entering disc is directly seen from below the water bath at V = 0.06 m/s in panels (a), and at 0.1 m/s in panels (b). The disc shown is 8 cm wide (as shown in figure <ref>(b)).The time labels are centred at 0 ms when the disc makes it first contact with water. The trapped air film contracts inwards due to surface tension of water air interface. The process is also shown in Movies 1 and 2. The film's retraction dynamics are discussed in appendix <ref>.	2012.10137	fig2.jpg
0.503665	df77f5f96a914222acaeaa33b1d2aa2b	Snapshots of the free surface during the impact of a 12 cm wide disc at 0.5 m/s, recorded at 50k fps using the TIR setup, as shown in figure <ref>(a), imaging the free surface from below. The free surface is pushed down before the disc makes contact with it, which is evident from the first panel on the left. The time labels shown at top left corner are centred about t=0 at the instant where the disc makes first contact with the deformed water surface. An air layer is trapped on the disc at impact. It collapses inwards as the disc plunges further into the liquid bath (centre panel) and is finally punctured at the center by the liguid (right panel). The puncturing process is shown in Movie 4 and discussed in further detail in appendix <ref>. More examples using different parameters are shown in movies 5 and 6.	2012.10137	fig3.jpg
0.470482	469858566c4f4b26a75aa7052e282fd5	Time series of pressures measured at the two locations on an 80 mm wide disc (see figure <ref>b) when it impacts on a deep liquid bath at a velocity of (a) 0.075 m/s and (b) 1.0 m/s. The signals are centred about t=0 at the instant when the central pressure reaches its peak. (c) Peak pressures measured at two locations on the same disc are plotted over a range of impact velocities. Error bars show the standard deviation of peak pressures over 3–6 repetitions of the experiment at each impact velocity. The peak pressures at the centre are found to scale quadratically with V, whereas those near the edge of the disc are found to be slightly below those at the centre. The impact peak is always attained first at the edge sensor, irrespective of where a higher peak pressure is attained. The inset of panel (b) highlights this by showing the time difference Δ t_c-e = t_center - t_edge between the times t_center and t_edge at which the peak pressure is attained at the center and the edge, respectively.	2012.10137	fig4.jpg
0.468669	1adc6b7819594742aefc88b2434a8ba7	Pressure impulses Π measured from experiments at (a) V = 1.25 m/s and (b) V = 2.5 m/s are plotted as time series. Experiments were done with the sensor arrangement as shown in figure <ref>b. As before, all time series are centred about t=0 at moment when the pressure at disc centre reaches its maximum.	2012.10137	fig5.jpg
0.392299	46316dea67814de797315946961e08be	Non-dimensional pressure impulses Π̂ = Π/V R ρ_w measured at disc centre (from figure <ref>) are plotted against non-dimensional time t V /R. The convincing data collapse in the region of interest (below t V/R=0 in the early stages of impact loading) reveals that the accumulation of pressure impulse at disc centre, when it impacts at high velocities, can be described as an inertial process.	2012.10137	fig6.jpg
0.429453	393de1d272b6460da0e0828da15d8f70	(a) Time evolution of the impact force measured using the disc shown in figure <ref>(b), impacted at various velocities. The time series are centred about t=0 at the time of registering peak impact force. The natural frequencies of the impacting structure used here were measured with the respective load cells. They ranged from 313.2 ± 55.5 Hz for the lightest disc, to 236.8 ± 30.5 Hz for the heaviest attachment. (b) Peak average pressure, P̃_peak = F_peak/π R^2 computed from the force measured in experiments using discs of varying sizes, materials and impact speeds are plotted against their velocities of impact. Data shown using purple coloured markers are from experiments impacting steel discs, yellow from impacting 3D printed plastic discs, and green markers from experiments using aluminium discs. Peak average pressures are found to deviate substantially from the previously found quadratic dependence on V for the centre and (to a lesser extent) the side pressures presented in figure <ref>(c).	2012.10137	fig7.jpg
0.426297	698efabdb48748b782244a119177227e	Non-dimensional force impulses ℱ/R^3 V ρ_w are computed from force measurements with a steel disc of radius R = 4 cm, impacting on water at various V. Each result is centred about t=0 at the time of the when the corresponding impact force attains its peak value. The horizontal dashed line is drawn to mark the non-dimensional force impulse value of 4/3. Inset: A force-time curve at V=1 m/s is shown; the shaded area shows the time-duration over which F(t) is integrated to obtain ℱ.	2012.10137	fig8.jpg
0.458096	2df842c0e30b4ebaa6be389d08e23ebc	Impulses accumulated during the first impact peak (see inset of figure <ref>) are plotted against growth rate of the added mass of liquid at impact. Impulses calculated from pressure measurements (Π_impact) at the disc centre (shown in figure <ref>) were multiplied by the disc area so that they can be directly on the same scale as ℱ_impact. Dashed line shows the theoretical calculation for the impulse transferred from an impulsively accelerated disc to an infinite half-space filled with inviscid fluid. Dotted line is the result from <cit.> (equation (<ref>)).	2012.10137	fig9.jpg
0.425126	7fda6b9ac4834410917b4548fcef3502	Surface of parameter posterior projected in confounder space, in which five local optima (the black X marks) can be observed.	2012.10141	contour_five_minima.jpg
0.525795	a283dabf7757410c80e653b45e2f6c7b	The posterior estimate of the causal effect of BMI, measured in , on the log-odds of psoriasis risk obtained when running the MASSIVE algorithm with empirically determined hyperparameters. The vertical lines correspond to the results (estimate and error bars) from the IV analysis performed by <cit.> on the UK Biobank data set.	2012.10141	plot_beta_BMI_psoriasis.jpg
0.422872	5534d69dbecd4cc8852c7c5e7eeff6b9	Comparison of estimated causal effect with different sparsifying priors when five out of 50 candidates are valid instruments. The true causal effect value (= -1.093) is indicated with a dashed vertical line. Gaussian: We estimate a single model with fixed Gaussian priors on the genetic associations. Oracle: We estimate a single model with a spike-and-slab prior, where the latent indicators on the pleiotropic effects are chosen to correspond to the ground truth, i.e., _j = 0 if the effect is irrelevant and _j = 1 if it is relevant. MASSIVE: We use a spike-and-slab prior over the pleiotropic effects and learn the latent indicators with BMA.	2012.10141	plot_beta_compare_priors.jpg
0.476776	a09f58e6a85e4ef888b6529064962b3a	Left: Estimated effect of institutions (rule of law) on macroeconomic growth Right: Estimated effect of economic integration on macroeconomic growth. We used empirically determined values for the MASSIVE hyperparameters _ and _.	2012.10141	plot_determinants_growth.jpg
0.461865	16d0cb61e6f24152a4f08977f989b004	Comparison of MASSIVE and JAM-MR results averaged over one hundred simulated data sets. MASSIVE returns a posterior distribution, unlike JAM-MR which outputs point estimates. For MASSIVE, we took the median value as the causal point estimate for each data set. We then computed the root mean squared error (RMSE) of the different point causal estimates for both algorithms, as well as the bootstrapped RMSE confidence interval. We ran JAM-MR using the default settings, according to which a grid search is used to set the tuning parameter w <cit.>.	2012.10141	simulation_results_rmse.jpg
0.517027	a3c3605b20aa4101a1083af77d850488	Radial cut of the surface density along the axis passing by the companion for different values of the parent body's average optical depth, that is for different levels of collisional activity.	2012.10143	cutcdensc.jpg
0.577424	480bb354d56d4ac18536817e47784817	Radial cut of the surface density along the axis passing by the companion (located on the left-hand side) when varying the mass of the companion star. The μ=0.25 (SW) case corresponds to a low-mass companion with a strong stellar wind.	2012.10143	cutm2c.jpg
0.450191	f2ea816f5b214b3aa3f080aa46cdef0c	Surface density radial profile for both the companion and anti-companion directions, as compared to the profile obtained with no companion.	2012.10143	densprofc.jpg
0.49305	9187f669013848e6a358f12ea95002d5	Massive companion case (μ=1): absolute SED for a system viewed at a distance of 20 pc	2012.10143	fluxhigh.jpg
0.425515	3b0f23ba794e48b59225c84d0124a570	Normalized scattered-light images for a low companion mass case with μ=0.25, for which we assume a strong stellar wind that blows out all grains s≤ s_SW=6 μm. The colour scale is the same as in Fig.<ref>	2012.10143	im0.5-lowprj.jpg
0.427878	3a40ec05b6b044f599b4bd5067de90ac	Nominal case: Geometrical cross section per log grain-size for 3 different regions of the system.	2012.10143	psde0c.jpg
0.536103	6d7ab39dd51449c89d75ac207287e7bf	Disc-integrated SED for the nominal case as well as for 2 companion-free cases: one where the PB ring is at the same distance, i.e., 85 au for the centre of the ring, as in the nominal case, and one where the disc is moved outward by 75%. We also plot, as a comparison, a blackbody profile at a distance of 85 au from the central star.The different SEDs have all been normalized to their maximum value.	2012.10143	sedcompc.jpg
0.445265	d1dde73026e14a819713d0dd6a7fa5c6	Steady state behaviour as a function of . The probability of each photon number, P_n=⟨ n\|ρ\|n⟩ is plotted on a log-colourscale, the expectation value of photon number is indicated by the red-dashed line. Overlaid in white are the squared amplitudes of the fixed points, stable/unstable with solid/dashed lines. Δ =0.4 for the first column (a,b,c) and Δ=1.0 for the second (d,e,f), while p takes the values 4 (a,d), 5 (b,e) and 6 (c,f).	2012.10149	All_ps_v2.jpg
0.399852	01943090413f47b7af25379ebec9c63b	(a) ⟨n̂⟩ as a function of for various Δ and p=6, log-scale. The photon numbers are scaled using the value at which the BP amplitude saturates, z_p / (2 Δ), so that the range is between zero and unity for all Δ. (b) Behaviour of ⟨n̂⟩ as a function of both Δ and (with a linear colour-scale).	2012.10149	Colour_N2.jpg
0.451199	80ea30d209a743728fcf084c1fbc1f98	Top right: Band diagram of 6 eigenvalues with smallest real parts and corresponding simultaneous eigenoperators of and ℛ. Here ≈ 1.03 ^(T) [indicated by the first red dashed vertical line in figure <ref>d]. The steady-state and the eigenoperators labelled (1-6), following the numbering of eigenvalues in the band diagram, are shown as WDs. Colour intensity indicates the magnitude of complex WDs while hue indicates phase. The steady state and (1) (indicated with an asterix) use the amplitude to the power of 1/2 for the colour intensity to enhance the weaker features.	2012.10149	Complex_Wigs_1_v2.jpg
0.406304	ec65fe207c444af3835b258a7c4270ec	Band diagram of 12 eigenvalues with smallest real parts (two lowest bands) and corresponding simultaneous eigenoperators of and ℛ. Here ≈ 2.12 ^(T) [indicated by the second vertical dashed redline in figure <ref>d] which is well above the second bifurcation and the eigenvalues are shown on a log-scale.	2012.10149	Complex_Wigs_2_v2.jpg
0.485841	9a046864a1b44289ad2ecea2c0ca8b7f	Expected photon numbers calculated using the Fokker-Planck equation (equation <ref>) in blue and master equation (<ref>) in orange. The solid/dashed grey curves show the stable/unstable fixed points (obtained using the coherent state ansatz). (a-d) Δ =0.35, p=1-4. (e-h) Δ = 0.6, p=1-4.	2012.10149	FP_vs_QT.jpg
0.464762	abc6234941b148d989e25178396f4203	(a) Cartoon indicating the meaning of the different rate constants in the effective model. (b) Values of the rate constants for a system with p=6 and Δ=0.7. The rates Γ_in and Γ_out can only be obtained once the BPs have formed >^(T), and Γ_c above the second bifurcation (indicated by the vertical line). The inter-BP rate, Γ_l falls below γ/10^6 over the entire parameter range and is not shown.	2012.10149	Interpoint_rates.jpg
0.379615	873105819c2b496f865391ff513855da	Left axis: Lower part of the eigenvalue spectrum of the Liouvillian as a function of , with Δ=0.7 (log scale). Data point colour indicates the eigenvalue of the corresponding eigenoperator under rotation. Black vertical line: location of the 2^nd bifurcation. Right axis: average steady-state photon occupation number (log scale). The behaviour for p=3, 4, 5 and 6 is shown in plots (a), (b, (c), and (d) respectively. The red-dotted vertical lines in (d) show two particular values analysed in more detail in figures <ref> and <ref>.	2012.10149	Lio_spectrum.jpg
0.44133	19ffdb8e8e344d099fd10f8726a30a06	Photon numbers in the steady state as a function of for Δ = 1, p=6 with ω_J=6ω_0 and ω_0 /γ= 1×10^3 with (left panel) and without (right panel) the RWA. The colour (on a log-scale) indicates P_n=⟨ n\|ρ\|n⟩, also shown are the average photon number (red-dashed line), together with the squared amplitudes of the stable (solid white lines) and unstable (dashed white lines) fixed points.	2012.10149	RWA_comparison.jpg
0.433518	9325a639b6ed4c14b85199d796c61021	Average occupation number (blue) shown together with (a) the lowest part of the Liouvillian eigenspectrum together with (b) the extracted rates for γ_VN / γ = 0.05, Δ = 0.7, p=6. The corresponding plots obtained without including voltage noise are shown in figures <ref>(d) and <ref>(b).	2012.10149	Voltage_Noise.jpg
0.536691	ae12c07fa41248b48de2a8c6e78d80fd	Wigner densities of the steady state. Overlaid are streamlines of the coherent state drift terms (arrows), and the stable/unstable fixed points in black/red. The panels show p=6, Δ = 1.2 with / ^(T)≈[0.8, 1.1, 1.6] respectively. The WD is proportional to the intensity of the blue colour. Inset: ⟨ n ⟩ as a function of , dots indicate the values used in the main plots.	2012.10149	Wigner_functions_4.jpg
0.421387	e18daf6b398f4013863afb9b1167fec8	(a) Schematic diagram of the circuit realisation of the model system we consider. An LC oscillator with frequency ω=√(1/LC) is driven at a frequency ω_J=2eV/ħ by a voltage-biased Josephson junction, characterised by the Josephson energy . The oscillator is assumed to be damped at a rate γ. (b) Sketch of the time-dependent potential in the Hamiltonian. It consists of a harmonic quadratic part and a moving sinusoidal potential <cit.>.	2012.10149	circuit.jpg
0.422894	732032279e8f430395803ff4ff850953	The DSA for the MAS on the right. All agents in the MAS are homogeneous and operate under DSA, but the figure shows the DSA components for only agent i. The sensed state of agent i's j^th neighbor is denoted as S_i,j. The AC, BC, and DM take as input the state of the agent and its neighbors.	2012.10153	DSA_net.jpg
0.479651	b2d62e0321b647a99a6805b019ab7506	Voltage graph at node 4 of the MG network.	2012.10153	node_4_legend_n.jpg
0.397772	51acee1e739f4e8c96945bf4b99b4797		2012.10155	ILC1mssm-finalH20-allobs1-nogluino-long-predicted-gauginos-probed-plot.jpg
0.42621	97f4ca91c7204136a4c47a5ea65d13be		2012.10155	ILC1mssm-finalH20-allobs3-nogluino-long-predicted-masses-inclg-incltrue-probed-plot.jpg
0.470414	e2934ef30a5b44c19dd868b5cc881967		2012.10155	ILC1mssm-finalH20-allobs3-nogluino-long-runningplot.jpg
0.398253	34e2413c7a5641008ec9d3ec2758593f		2012.10155	exclusion_complete_higgsino.jpg
0.386529	bacddf245dd8484f9e2cc14c24f94086		2012.10155	exclusion_complete_wino.jpg
0.440053	8d17f19780914b9f8c04b08d209e2790		2012.10155	nGMM1-test1-M1M2M3-runningplot.jpg
0.429395	db1a7ffdf53141ee8124f7649ee81749		2012.10155	nGMM1mssm-finalI20-allobs3-nogluino-long-runningplot.jpg
0.416514	a749b450bcfb4bfa91b99b921dc68433	Residual calculated from equation <ref>.	2012.10158	Residual_div_error.jpg
0.451259	b3d706ff2d90462ea2044d29020496b7	TES Pulse area histogram (black circles) for a strongly attenuated pulsed diode laser at 820 nm. Dashed red line is the model comprised of a sum of 16 Gaussian curves (see S3 in Supplementary Material). There are no peaks associated with 0 photons due to the triggering requirement, as explained in the text. Note that the last 2 Gaussian curves are not visible in the figure due to their low amplitude.	2012.10158	area_histogram_16_final.jpg
0.465265	137601b99ab24a73998cfb86a52bc5b8	TES pulse detailed with measurements our FPGA can perform. The solid blue line is the TES pulse and the solid red line is the TES pulse slope (amplified 1000× for clarity).	2012.10158	detailed_trace.jpg
0.4267	7560aeeda7a04171ab5d9ddaf45d99d1	χ_R^2 for our model M as a function of the number of bins used in the area histogram.	2012.10158	redchi_bin_number.jpg
0.397764	dfe21f63462248c2af66cee855977796	One specific simulation case of JueWuDraft against with HWR strategy, where JueWuDraft takes the first move.	2012.10171	Heroes_Pick.jpg
0.419194	87d4184994e34dc481228a7022e6e69e	MCTS for drafting process. Each simulation contains four steps: selection, evaluation, expansion and back-propagation, which are listed on the left. At the back-propagation step, the returned value will be added with a win-rate of this round when a round is end. After the search is complete, probabilities π is returned (proportional to C(s), the visit count of each node, and τ is a parameter controlling temperature), which is shown on the right.	2012.10171	MCTS.jpg
0.562298	b2d640402118401985902e3d30e636aa	Value propagation	2012.10171	Multi_Round_Value_Propagation.jpg
0.522326	560ecb7075724971a6c7ad098ce9084e	Overall Training Framework. The total framework consists of 4 modules: data sampler, sample pool, neural network trainer, model pool.	2012.10171	Overall_Training_Framework.jpg
0.54039	f34b7d509adc4436b3ea74d5a308632b	State vector configuration for policy and value network. It consists of three parts: heroes indexes of the current round; history draft information; the related game information (e.g., current round, whose turn.)	2012.10171	Vector.jpg
0.469624	262171ed4b3d4229ba63385d9b7be5af	Ablation study for key components.These experiments use a specific setup: 3-round game on Human Dataset, taking HWR as a comparison method.	2012.10171	ablation_new.jpg
0.424492	e9c61eed63fd407f97d051ce5ea15ff3	Screenshot of hero drafting phase in Honor of Kings. The left column shows heroes picked by ally camp, and the right column shows heroes picked by enemy camp. Drafting alternates between two teams until all players have selected one heroes, which makes up a complete lineup.	2012.10171	screenshoot.jpg
0.414367	9cf5fa18250d41818a6e4eef139f97c4	Left: Brightness of expected sources in AIA 131 and 94Å, given the size, location, and electron density of the thermal X-ray source. Middle: AIA observations. Right: Pre-flare background-subtracted observed emission.	2012.10179	aia_prediction_cbar.jpg
0.533968	6c80b012ac65488cbba34e6aab12857c	The flare of May 1, 2013, was observed from many perspectives. This diagram imagines looking down on the ecliptic; solid vectors point towards the satellites, and dashed lines represent the half of the Sun visible from each perspective.	2012.10179	fig1new.jpg

0.4261

f1f53c1758d14139b1b517e43967edae

Constraint equation (<ref>) for s_1|_t=0=0, γ_0=0.1, w_c=2, t_c=25 for ω/m=0.32.

2012.10109

exampleConstraint.jpg

0.451006

d8fb29777ce5489ba748245d20feeb5b

RIS-NOMABC system model

2012.10111

Fig1_system_model.jpg

0.460933

7c05cdf9eb264290aa126400722d1290

The geometric interpretation of the manifold optimization algorithm

2012.10111

Fig2_MOP.jpg

0.411877

022186fcffd245678471ee1a36eba192

System sum rate versus the number of reflecting elements Q_ RIS, P_ T=35 dBm

2012.10111

Fig3_SumRate_Q.jpg

0.454336

3437f7e9ea7c4b26bfa7400012618850

System sum rate versus the transmit power P_ T, R_k^ min=1 bit/s/Hz

2012.10111

Fig4_SumRate_PT.jpg

0.40734

9460c45887ee46b79ffa0d66f1e20351

System sum rate versus the minimum QoS requirement R_k^ min, Q_ RIS=50, P_ T=40 dBm

2012.10111

Fig5_SumRate_Rmin.jpg

0.484634

e9769325b48045ea8c1211f1a4953dae

A CAD model of the lateral vibration attenuation system with piezo-elastic supports and a sectional view of one of the piezo-elastic supports, cf. <cit.>.

2012.10113

fig1.jpg

0.477549

441f140840f447fab7594b2a013f690e

Four different density estimates and as reference the data Y_1,…,Y_n indicated on the x axis.

2012.10113

fig2.jpg

0.469226

ff9542eec74844a7b6d5a49706eaaaa0

(a) Scanning electron microscopy image of the experimental device with false colors. Labels indicate source (S), drain (D), left and right tunnel gates (LTG, RTG) and plunger gate (PG). The Al shell is colored in green. (b) Longitudinal (left) and cross-sectional (right) cuts of the model used in the simulations: substrate (dark grey), InSb nanowire (orange), Al (green), ohmic contacts (yellow), dielectric (grey) and gates (blue). Conductance oscillations measured at zero bias voltage exhibit 2e peak spacings at B=0 (c) and 1e peak spacings at B=0.6 T (d).

2012.10118

figure1.jpg

0.422009

77cf94dc805b481e94683640adfbaedc

(a) Median peak spacing of Coulomb blockade oscillations as a function of magnetic field and gate voltage. Dark blue areas correspond to predominant 2e periodicity, light blue to 1e periodicity. For each pixel, the median is determined from a window of 20 mV in plunger gate voltage, corresponding to ≈ 20-40 conductance oscillations. (b) Peak spacing distributions for regions I, II, and III as labeled in panel (a). We attribute the presence of a residual 1e peak at low B in region I to the possible poisoning of the island <cit.> as well as to the occasional presence of subgap states <cit.>.

2012.10118

figure2.jpg

0.39965

2d8d05bb0f354e49a3907d56c77abaaa

(a) Quasiparticle energy gap E_min as a function of plunger voltage V_pg and magnetic field for the simulated island of length 1. We indicate regimes I, II and III as in Fig. <ref>. The energy scale is saturated at 40 because this is the estimated charging energy in the experimental device and thus the expected boundary at which the 2e→1e transition would start to occur. We note that this boundary is only weakly sensitive to the level of disorder used in the simulations, likely due to the short length of the wire <cit.>. (b) Bulk topological phase diagram indicating the bulk gap E_gap and the sign of the topological index 𝒬=± 1, both obtained via the simulation of the bandstructure of an infinitely long wire. Red regions are topological. Two topological regimes with large gap and small coherence length are marked by the dashed grey lines in both panels (a) and (b). (c) Electrostatic potential profiles in the nanowire cross-section for the three plunger gate values indicated by blue, orange and green bars in panels (a) and (b). (d) Magnetic field dependence of the lowest (red/blue) and first excited (gray) energy levels for three different plunger values. The left panel (blue) crosses a topological region of the phase diagram, while the two other panels (orange and green) correspond to topologically trivial regions.

2012.10118

figure3.jpg

0.437737

a06073845b7f4266bb5b3707d65b949e

(a) Coulomb blockade oscillations measured versus plunger gate and magnetic field in region II of the phase diagram. The measurement covers five pairs of even-odd Coulomb valleys (labeled by index i=1,…,5) in the field range indicated by the black arrow. (b) Field dependence of the even and odd peak spacings S_e,o (left y axis, in mV) and of the peak height asymmetry Λ (right y axis) for each pair of Coulomb valleys. Vertical dashed lines denote the linearly interpolated values of B at which Λ=0.5, corresponding to equal peak heights. These values of B closely match extremal points in S_e,o. (c) Peak spacing difference and peak height asymmetry as a function of magnetic field. Black crosses correspond to the values of B denoted by vertical dashed lines in panel (b).

2012.10118

figure4.jpg

0.436075

8caac266b93e41d09474524334a9cac6

Conductance versus bias voltage and plunger gate at B=0, showing 2e-periodic Coulomb oscillations around zero bias voltage. From the height of the Coulomb diamonds <cit.>, we estimate a charging energy E_c≈40.

2012.10118

supp_figure_coulomb_diamond.jpg

0.415329

620bbc7575d349f396d4107f942f32e4

Coulomb peak spacings and oscillation analysis, analogous to Fig. 4 of the main text, for an additional dataset measured in region II. In panels (b) and (c), data points at B=0.54 T are omitted since their valley identification is ambiguous due to the gate jump visible in panel (a). Here both tunnel gate voltages are set at -0.175.

2012.10118

supp_figure_coulomb_oscillations_I.jpg

0.460518

54349e7f46e445dd99bab1ef41efa3d0

Coulomb peak spacings and oscillation analysis, analogous to Fig. 4 of the main text, for an additional dataset measured in region II. Here V_LTG=-0.08, V_RTG=-0.3.

2012.10118

supp_figure_coulomb_oscillations_II.jpg

0.402962

0b6efecc593d4949b2d4ac42d0b0a5d0

Coulomb peak oscillations and peak spacing extraction for an additional dataset in region I, measured as a function of the tunnel gate voltage at a fixed value of the plunger gate voltage, V_PG=-1.4.

2012.10118

supp_figure_coulomb_oscillations_region_I.jpg

0.455073

b4dd2eba386c46dea773f82066fa124d

Coulomb peak oscillations and peak spacing extraction for an additional dataset in region III. We note that with this resolution in the conductance data, the even-odd regime is briefly visible in the field dependence of the peak spacing histograms in the right panel, around 50 mT. Peak spacing oscillations are instead not visible at higher fields.

2012.10118

supp_figure_coulomb_oscillations_region_III.jpg

0.451633

ee7a5b52af2d4201946375e2fd12ac9f

Measurement of the parallel critical field of the Al shell of the island via tunneling conductance. This measurement is performed by opening the left tunnel gate (V_LTG=2 V), while keeping the right tunnel gate in the tunneling regime (V_RTG=-2 V). The critical field is B_c≈ 0.8 T.

2012.10118

supp_figure_critical_field.jpg

0.421136

93963d9911b448f985a92841931de611

Energy gap as a function of plunger voltage and magnetic field in the simulated island with a band offset of -25 meV. Here the negative band offset corresponds to a depletion layer at the InSb/Al interface. In comparison to Fig. 3a, the transition region II seems very small or absent and region I directly transitions into region III. Due to the absence of a transitional region II, the depletion layer case is not promising for topological applications. We note that spatial fluctuations of the band offset are not captured in the simulation, but they may occur in experimental devices.

2012.10118

supp_figure_depletion.jpg

0.41443

339024b383874c31abfbbe1d58752c04

Energy gap as a function of plunger voltage at zero magnetic field for a band offset of (a) 50 meV and (b) -25 meV. We show the gap both in a clean infinite system, and in a finite system with and without disorder. Both the gap in a finite system with and without disorder and infinitely long system is shown. The dashed blacked line in the left panel most clearly identifies the three regimes of the proximity effect described in the main text: the curve of E_gap versus plunger gate shows two plateaus separated by one crossover region. The first plateau, with E_gap≈Δ_Al, is identified with region I. The second plateau, with E_gap = 0, is identified with region III. The crossover region is region II. Finally, the difference between the energy gap of the finite system and of the infinite system in region III is clearly visible.

2012.10118

supp_figure_gap.jpg

0.385818

d4cfde811a52462c97960ea544e9d738

Gate versus gate conductance maps, taken at zero bias voltage, illustrating the tunnel gate compensation implemented during the phase diagram measurement of Fig. 2 of the main text. Left panel: Right tunnel gate versus plunger gate conductance map, measured at zero bias voltage, In the phase diagram measurement, the left tunnel gate was kept fixed at V_LTG=-0.03, while the right tunnel gate was varied together with the plunger gate following the red dashed line, in order to remain close to the tunneling regime throughout the measurement. Right panel: Same gate map but taken versus the left tunnel gate voltage, in which case no compensation was needed.

2012.10118

supp_figure_gate_vs_gate.jpg

0.443074

c30ca03a451346f094ed1055c042a75e

Energy gap E_min as a function of plunger voltage and magnetic field in the simulated island with length 1, for two different values of mean free path l_e. A single disorder realization is shown. We find that with increased disorder strength, and decreased mean free path, the boundary between the dark blue and white regions of the parameter space, i.e. the boundary at which E_min first vanishes, becomes more and more smeared due to disorder broadening of the individual bands.

2012.10118

supp_figure_mfp.jpg

0.4313

a99eb13569464f0588b408a525524576

Energy gap as a function of plunger voltage and magnetic field in the simulated island with the orbital effect of the magnetic field turned off in the simulation. In comparison to the left panel of Fig. 3 of the main text the energy gap is not suppressed until much larger magnetic fields. Furthermore, the transition is strongly dependent on plunger gate voltage for voltages corresponding to region III in Fig. 3 of the main text.

2012.10118

supp_figure_no_orbital.jpg

0.460519

84022cb7c112442797f628e84ef09c66

A second phase diagram measurement, executed on the same island device measured in Ref. <cit.>. This device also shows three characteristic regions as in Fig. 2 of the main text, although the transition between region I and III is more abrupt. This difference may be due to a difference in the lever arm of the gate, or to sample-to-sample as well as local fluctuations in material parameters such as the band offset between InSb and Al. See for instance Fig. <ref> for a simulation in the presence of a negative rather than a positive band offset (deplation layer rather than accumulation). Also, we note the larger value of B^* in region III compared to the phase diagram of Fig. 2 of the main text, which we attribute to the nanowire having a smaller diameter.

2012.10118

supp_figure_phase_diagram.jpg

0.410868

5bee50446a1a495386ae2a36889d1a08

Standard deviation of the peak spacings as a function of magnetic field and plunger gate. Regions I, II, III are indicated in analogy to Fig. 2 of the main text. The larger fluctuations occurring at B≲ 0.65T in regions II and III are an indication of the even-odd regime of Coulomb oscillations, distinguished from the more regular 1e regime occurring at B≳ 0.65T.

2012.10118

supp_figure_std_spacings.jpg

0.415814

35356ed91bca49ce98b8e6cc1b48774b

(a-b) Large-range conductance measurement in the negative plunger gate voltage (region I of the main text). Here the right tunnel gate is varied, with the left tunnel gate kept fixed at V_LTG=-0.03. Panel (a) shows a selection of linetraces from panel (b). (c) Corresponding peak spacing histogram. The 2e-1e transition field is not affected by the compensation in tunnel gate voltage and fluctuations in the background conductance.

2012.10118

supp_figure_tg_measurement_region_I.jpg

0.44229

6ff424f31e434ea9805311134655eaf7

(a- b) Large-range conductance measurement in the positive plunger gate voltage (region III of the main text). Here the right tunnel gate is varied, with the left tunnel gate kept fixed at V_LTG=-0.03. Panel (a) shows a selection of linetraces from panel (b). (c) Corresponding peak spacing histogram. As in the previous Fig. <ref>, the 2e-1e transition field is not affected by the compensation in tunnel gate voltage and fluctuations in the background conductance.

2012.10118

supp_figure_tg_measurement_region_III.jpg

0.405087

73fbe67296bc45e1a00c7838c7d82a9e

Topological coherence length as a function of plunger voltage and magnetic field in the bulk wire. The topological phase boundaries from the middle panel of Fig. 3b of the main text are shown as light grey lines. Only two topological phases at the lowest plunger values have a coherence length that is significantly shorter than the island length.

2012.10118

supp_figure_xi.jpg

0.421883

dc569871e4104c238340aba418fae097

Superfluid density ρ_s (open circles) and structure factor S(Q) (open squares) as functions of t for (a) μ=4.0 and (b) μ=3.2. Here V=4 and L=24. Both quantities show the signatures of first-order phase transition from the ICS to the SF states.

2012.10121

ICS_SF_24x24.jpg

0.46964

77abeb9cabe84395a7e9877663c96b59

Illustrations of domain wall motion. (a) Removing a column of bosons. (b) Shifting the right half of the lattice costs no extra potential energy but gains kinetic energy due to the fluctuation of the domain wall (red line). (c) Multiple domain walls. (d) QFS state with a domain wall density ρ_D = 1/2.

2012.10121

fig_domain.jpg

0.439808

0c49186f7d9d42a19b140291efadd91d

Ground-state phase diagram with V=4 obtained from QMC calculations after extrapolating to thermodynamic limit. The dotted lines are the phase boundaries predicted by the domain wall analysis. The insets show the CBS and the QFS lattice structures. Here V'=1 as the energy unit.

2012.10121

fig_mu_t.jpg

0.490634

d426455a0a27425d9515feafe83553b3

Hysteresis of the structure factors S(Q) for the cases of (a) μ=4.0 and (b) μ=2.0, which correspond to the 1/3-filling plateau state and the 1/4-filling QFS state respectively. Here V=4 and L=24. The insets show the double-peak feature of S(Q) around the transitions.

2012.10121

hist_T.jpg

0.463205

cfd0b9c3b2dd4f4ea2eec621baf708bd

Boson density ρ (circles) and superfluid density ρ_s (squares) as functions of V' with V=4 for (a) μ=4.0 and (b) μ=4.6. Here L=36 and V=4.

2012.10121

n_rhos_Vd_36x36.jpg

0.46347

f6147771bc0c4511a9e10feb871fd7e8

Order parameters as functions of μ with t=0.4 and V=4. Upper panel: the particle density ρ as a function of μ. The fractional numbers are the corresponding densities of the plateaus. Solid (Open) circles represent the data for L=36 (L=24). Lower panel: superfluidity ρ_s (filled squares) and structure factors S(Q) (open circles) as functions of μ. The corresponding ordering wave vectors of the data are, from left to right, Q=(2mπ/L, π) with m=L/4, (L/4)+1, ..., L/2. For simplicity, the structure factors for the ordering wave vectors Q=(π, 2mπ/L) are not shown. Note that the data of S(π,π) is reduced by five times.

2012.10121

n_sq_mu_36x36.jpg

0.438802

7bce316badc74dac9754a2dfc3c8f36a

Domain wall density ρ_D as a function of μ for t=0.4 (upper panel) and t=0.2 (lower panel). The red solid lines are analytical predictions given by Eq. (<ref>). The insets show the fittings of the interaction energy f(ρ_D) to a power-law function Aρ_D^α for each case. Here V=4 and L=24 are taken.

2012.10121

wall_den_24x24.jpg

0.412704

f2babc7744724c9dbb0386765df09d42

The left (right) panel shows the East (North) parallax signature, with proper motion removed, for 6.7-GHz methanol maser G041.22-0.19 which is characterized by 4 background quasars and 25 maser spots, for 100 quasar-maser pairs. The final parallax, 0.113 ± 0.022 mas, is determined with the âfake quasarâ method <cit.> and is shown as the thick solid line. Red, yellow, blue and green dashed lines denote individual fitting results for the four background quasars <cit.>.

2012.10130

Spiral1.jpg

0.530351

124815f6853d495e9516e853622df5ca

The conceptual image overlaying the outlines of the four spiral arms of the Milky Way. The Galactocentric coordinate system is divided into four quadrants, as indicated by yellow dashed lines. Quadrant numbers are indicated in four corners. The Galactic center (red asterisk) is at (0, 0) and the Sun (red Sun symbol) is at (0, 8.15) kpc. The outlines of four arms are Norma-Outer arm (blue); Scutum-Centaurus-OSC arm (yellow); Sagittarius-Carina arm (green); and Perseus arm (white). The dotted lines are the widths of the four arms, defined as enclosing 90% of their distance indicators <cit.>.

2012.10130

Spiral2_small.jpg

0.521817

edefe51e3d8b4f80b3f4db84e6311969

A conceptual picture overlaid with the 2607 young objects <cit.> and 199 masers <cit.> shown as yellow points.

2012.10130

Spiral3_v2_s.jpg

0.410238

75c83eb64f3944fd9f29bf99821d7372

The Galactic boxy bulge and long bar reconstructed by combining various NIR surveys. Top: the inner Galaxy in solar perspective. Middle: Face-on projection of best-fitting RCG star count model. Bottom: side-on view of the bar/bulge along the intermediate axis. Adapted from <cit.>.

2012.10130

Wegg_2015.jpg

0.478149

ed31d9e2307b46c4ab619cdb6053f8e8

Top: the conceptual picture of the Milky Way with its bar, four major spiral arms, a subsidiary Local arm, and 3-kpc arms. This artistic visualization also contains various important components such as gas, dust, molecular clouds and filaments, HII regions, young OB stars, and young star clusters. The Sun is marked with a circled red dot in the Local arm. The bar angle between the bar major axis and the Sun-Galactic center line is around 25 - 30^. The Galactic rotation is in the clock-wise direction. (Credit: Xing-Wu Zheng & Mark Reid BeSSeL/NJU/CFA). Bottom: the Milky Way seen in the infrared band by Diffuse InfraRed Background Experiment (DIRBE) on board NASA's COBE satellite (left-right flipped from the original image to be more consistent with the face-on picture).

2012.10130

complete_spirals.jpg

0.447232

1d3e820e089c4048b3494e7d84022eae

Pegasus graph. Blue circles represent qubits, and lines connecting qubits represent connections between them.

2012.10135

300_pegasus.jpg

0.392396

1dcdbd50508d47b6bcd5442d94f795a2

Bit-Flip Heuristic Algorithm (BFHA)

2012.10135

alg1.jpg

0.42972

e2c16e7f13ce4662a5180a089a76b35d

The numbers of one-hot constraints violated in 10000 solutions obtained using the Ohzeki method with D-Wave Advantage. Vertical axes show the number of solutions, and horizontal axes show numbers of violated one-hot constraints. No problems had feasible solutions for all sizes.

2012.10135

fig2.jpg

0.410306

0c402b16aa344d87bf8785191d6bd09f

QAP optimization

2012.10135

sub_alg2.jpg

0.44567

6b72738e6efd476ea2e62a4a90606451

(a) Schematic of the setup. A linear motor is used to impact a disc on water surface with constant velocity. Using total internal reflection (TIR), the water surface can be used as a mirror, and its behaviour observed when subjected to deflections. A load cell is installed along the rod to measure the overall force experienced in the vertical direction. (b) Design (upper figure) and dimensions (lower figure) of an 80 mm wide disc on whose surface local impact pressures are measured. The two identical sensors have a circular sensing area with a diameter of 5.5 mm. Their mounting locations - at the disc's center, and close to its edge, are shown in panel (b).

2012.10137

fig1.jpg

0.441138

64b13a433cf0426da8648dc4ffee0ed8

Time evolution of the diameter D_air of the retracting air film at low impact velocities for different disc diameters D and impact velocities V. Note that the retraction velocity V_retr≈ 0.38-0.42 m/s appears to be independent of D and V.

2012.10137

fig10.jpg

0.415611

1ed208c94cb244e18a0ad57c564644e0

Time interval Δ t_punct between the first contact time of the disc and the water surface and the appearance of the puncture in the center of the air film, as a function of the impact velocity V for three different disc diameters. The dashed lines are best fits to the functional form Δ t_punct = A/V^2, with A constant.

2012.10137

fig11.jpg

0.470444

e90f7298b05942fc9bb8e43e4c3dc8ef

The trapping of an air film on a water-entering disc is directly seen from below the water bath at V = 0.06 m/s in panels (a), and at 0.1 m/s in panels (b). The disc shown is 8 cm wide (as shown in figure <ref>(b)).The time labels are centred at 0 ms when the disc makes it first contact with water. The trapped air film contracts inwards due to surface tension of water air interface. The process is also shown in Movies 1 and 2. The film's retraction dynamics are discussed in appendix <ref>.

2012.10137

fig2.jpg

0.503665

df77f5f96a914222acaeaa33b1d2aa2b

Snapshots of the free surface during the impact of a 12 cm wide disc at 0.5 m/s, recorded at 50k fps using the TIR setup, as shown in figure <ref>(a), imaging the free surface from below. The free surface is pushed down before the disc makes contact with it, which is evident from the first panel on the left. The time labels shown at top left corner are centred about t=0 at the instant where the disc makes first contact with the deformed water surface. An air layer is trapped on the disc at impact. It collapses inwards as the disc plunges further into the liquid bath (centre panel) and is finally punctured at the center by the liguid (right panel). The puncturing process is shown in Movie 4 and discussed in further detail in appendix <ref>. More examples using different parameters are shown in movies 5 and 6.

2012.10137

fig3.jpg

0.470482

469858566c4f4b26a75aa7052e282fd5

Time series of pressures measured at the two locations on an 80 mm wide disc (see figure <ref>b) when it impacts on a deep liquid bath at a velocity of (a) 0.075 m/s and (b) 1.0 m/s. The signals are centred about t=0 at the instant when the central pressure reaches its peak. (c) Peak pressures measured at two locations on the same disc are plotted over a range of impact velocities. Error bars show the standard deviation of peak pressures over 3–6 repetitions of the experiment at each impact velocity. The peak pressures at the centre are found to scale quadratically with V, whereas those near the edge of the disc are found to be slightly below those at the centre. The impact peak is always attained first at the edge sensor, irrespective of where a higher peak pressure is attained. The inset of panel (b) highlights this by showing the time difference Δ t_c-e = t_center - t_edge between the times t_center and t_edge at which the peak pressure is attained at the center and the edge, respectively.

2012.10137

fig4.jpg

0.468669

1adc6b7819594742aefc88b2434a8ba7

Pressure impulses Π measured from experiments at (a) V = 1.25 m/s and (b) V = 2.5 m/s are plotted as time series. Experiments were done with the sensor arrangement as shown in figure <ref>b. As before, all time series are centred about t=0 at moment when the pressure at disc centre reaches its maximum.

2012.10137

fig5.jpg

0.392299

46316dea67814de797315946961e08be

Non-dimensional pressure impulses Π̂ = Π/V R ρ_w measured at disc centre (from figure <ref>) are plotted against non-dimensional time t V /R. The convincing data collapse in the region of interest (below t V/R=0 in the early stages of impact loading) reveals that the accumulation of pressure impulse at disc centre, when it impacts at high velocities, can be described as an inertial process.

2012.10137

fig6.jpg

0.429453

393de1d272b6460da0e0828da15d8f70

(a) Time evolution of the impact force measured using the disc shown in figure <ref>(b), impacted at various velocities. The time series are centred about t=0 at the time of registering peak impact force. The natural frequencies of the impacting structure used here were measured with the respective load cells. They ranged from 313.2 ± 55.5 Hz for the lightest disc, to 236.8 ± 30.5 Hz for the heaviest attachment. (b) Peak average pressure, P̃_peak = F_peak/π R^2 computed from the force measured in experiments using discs of varying sizes, materials and impact speeds are plotted against their velocities of impact. Data shown using purple coloured markers are from experiments impacting steel discs, yellow from impacting 3D printed plastic discs, and green markers from experiments using aluminium discs. Peak average pressures are found to deviate substantially from the previously found quadratic dependence on V for the centre and (to a lesser extent) the side pressures presented in figure <ref>(c).

2012.10137

fig7.jpg

0.426297

698efabdb48748b782244a119177227e

Non-dimensional force impulses ℱ/R^3 V ρ_w are computed from force measurements with a steel disc of radius R = 4 cm, impacting on water at various V. Each result is centred about t=0 at the time of the when the corresponding impact force attains its peak value. The horizontal dashed line is drawn to mark the non-dimensional force impulse value of 4/3. Inset: A force-time curve at V=1 m/s is shown; the shaded area shows the time-duration over which F(t) is integrated to obtain ℱ.

2012.10137

fig8.jpg

0.458096

2df842c0e30b4ebaa6be389d08e23ebc

Impulses accumulated during the first impact peak (see inset of figure <ref>) are plotted against growth rate of the added mass of liquid at impact. Impulses calculated from pressure measurements (Π_impact) at the disc centre (shown in figure <ref>) were multiplied by the disc area so that they can be directly on the same scale as ℱ_impact. Dashed line shows the theoretical calculation for the impulse transferred from an impulsively accelerated disc to an infinite half-space filled with inviscid fluid. Dotted line is the result from <cit.> (equation (<ref>)).

2012.10137

fig9.jpg

0.425126

7fda6b9ac4834410917b4548fcef3502

Surface of parameter posterior projected in confounder space, in which five local optima (the black X marks) can be observed.

2012.10141

contour_five_minima.jpg

0.525795

a283dabf7757410c80e653b45e2f6c7b

The posterior estimate of the causal effect of BMI, measured in , on the log-odds of psoriasis risk obtained when running the MASSIVE algorithm with empirically determined hyperparameters. The vertical lines correspond to the results (estimate and error bars) from the IV analysis performed by <cit.> on the UK Biobank data set.

2012.10141

plot_beta_BMI_psoriasis.jpg

0.422872

5534d69dbecd4cc8852c7c5e7eeff6b9

Comparison of estimated causal effect with different sparsifying priors when five out of 50 candidates are valid instruments. The true causal effect value (= -1.093) is indicated with a dashed vertical line. Gaussian: We estimate a single model with fixed Gaussian priors on the genetic associations. Oracle: We estimate a single model with a spike-and-slab prior, where the latent indicators on the pleiotropic effects are chosen to correspond to the ground truth, i.e., _j = 0 if the effect is irrelevant and _j = 1 if it is relevant. MASSIVE: We use a spike-and-slab prior over the pleiotropic effects and learn the latent indicators with BMA.

2012.10141

plot_beta_compare_priors.jpg

0.476776

a09f58e6a85e4ef888b6529064962b3a

Left: Estimated effect of institutions (rule of law) on macroeconomic growth Right: Estimated effect of economic integration on macroeconomic growth. We used empirically determined values for the MASSIVE hyperparameters _ and _.

2012.10141

plot_determinants_growth.jpg

0.461865

16d0cb61e6f24152a4f08977f989b004

Comparison of MASSIVE and JAM-MR results averaged over one hundred simulated data sets. MASSIVE returns a posterior distribution, unlike JAM-MR which outputs point estimates. For MASSIVE, we took the median value as the causal point estimate for each data set. We then computed the root mean squared error (RMSE) of the different point causal estimates for both algorithms, as well as the bootstrapped RMSE confidence interval. We ran JAM-MR using the default settings, according to which a grid search is used to set the tuning parameter w <cit.>.

2012.10141

simulation_results_rmse.jpg

0.517027

a3c3605b20aa4101a1083af77d850488

Radial cut of the surface density along the axis passing by the companion for different values of the parent body's average optical depth, that is for different levels of collisional activity.

2012.10143

cutcdensc.jpg

0.577424

480bb354d56d4ac18536817e47784817

Radial cut of the surface density along the axis passing by the companion (located on the left-hand side) when varying the mass of the companion star. The μ=0.25 (SW) case corresponds to a low-mass companion with a strong stellar wind.

2012.10143

cutm2c.jpg

0.450191

f2ea816f5b214b3aa3f080aa46cdef0c

Surface density radial profile for both the companion and anti-companion directions, as compared to the profile obtained with no companion.

2012.10143

densprofc.jpg

0.49305

9187f669013848e6a358f12ea95002d5

Massive companion case (μ=1): absolute SED for a system viewed at a distance of 20 pc

2012.10143

fluxhigh.jpg

0.425515

3b0f23ba794e48b59225c84d0124a570

Normalized scattered-light images for a low companion mass case with μ=0.25, for which we assume a strong stellar wind that blows out all grains s≤ s_SW=6 μm. The colour scale is the same as in Fig.<ref>

2012.10143

im0.5-lowprj.jpg

0.427878

3a40ec05b6b044f599b4bd5067de90ac

Nominal case: Geometrical cross section per log grain-size for 3 different regions of the system.

2012.10143

psde0c.jpg

0.536103

6d7ab39dd51449c89d75ac207287e7bf

Disc-integrated SED for the nominal case as well as for 2 companion-free cases: one where the PB ring is at the same distance, i.e., 85 au for the centre of the ring, as in the nominal case, and one where the disc is moved outward by 75%. We also plot, as a comparison, a blackbody profile at a distance of 85 au from the central star.The different SEDs have all been normalized to their maximum value.

2012.10143

sedcompc.jpg

0.445265

d1dde73026e14a819713d0dd6a7fa5c6

Steady state behaviour as a function of . The probability of each photon number, P_n=⟨ n|ρ|n⟩ is plotted on a log-colourscale, the expectation value of photon number is indicated by the red-dashed line. Overlaid in white are the squared amplitudes of the fixed points, stable/unstable with solid/dashed lines. Δ =0.4 for the first column (a,b,c) and Δ=1.0 for the second (d,e,f), while p takes the values 4 (a,d), 5 (b,e) and 6 (c,f).

2012.10149

All_ps_v2.jpg

0.399852

01943090413f47b7af25379ebec9c63b

(a) ⟨n̂⟩ as a function of for various Δ and p=6, log-scale. The photon numbers are scaled using the value at which the BP amplitude saturates, z_p / (2 Δ), so that the range is between zero and unity for all Δ. (b) Behaviour of ⟨n̂⟩ as a function of both Δ and (with a linear colour-scale).

2012.10149

Colour_N2.jpg

0.451199

80ea30d209a743728fcf084c1fbc1f98

Top right: Band diagram of 6 eigenvalues with smallest real parts and corresponding simultaneous eigenoperators of and ℛ. Here ≈ 1.03 ^(T) [indicated by the first red dashed vertical line in figure <ref>d]. The steady-state and the eigenoperators labelled (1-6), following the numbering of eigenvalues in the band diagram, are shown as WDs. Colour intensity indicates the magnitude of complex WDs while hue indicates phase. The steady state and (1) (indicated with an asterix) use the amplitude to the power of 1/2 for the colour intensity to enhance the weaker features.

2012.10149

Complex_Wigs_1_v2.jpg

0.406304

ec65fe207c444af3835b258a7c4270ec

Band diagram of 12 eigenvalues with smallest real parts (two lowest bands) and corresponding simultaneous eigenoperators of and ℛ. Here ≈ 2.12 ^(T) [indicated by the second vertical dashed redline in figure <ref>d] which is well above the second bifurcation and the eigenvalues are shown on a log-scale.

2012.10149

Complex_Wigs_2_v2.jpg

0.485841

9a046864a1b44289ad2ecea2c0ca8b7f

Expected photon numbers calculated using the Fokker-Planck equation (equation <ref>) in blue and master equation (<ref>) in orange. The solid/dashed grey curves show the stable/unstable fixed points (obtained using the coherent state ansatz). (a-d) Δ =0.35, p=1-4. (e-h) Δ = 0.6, p=1-4.

2012.10149

FP_vs_QT.jpg

0.464762

abc6234941b148d989e25178396f4203

(a) Cartoon indicating the meaning of the different rate constants in the effective model. (b) Values of the rate constants for a system with p=6 and Δ=0.7. The rates Γ_in and Γ_out can only be obtained once the BPs have formed >^(T), and Γ_c above the second bifurcation (indicated by the vertical line). The inter-BP rate, Γ_l falls below γ/10^6 over the entire parameter range and is not shown.

2012.10149

Interpoint_rates.jpg

0.379615

873105819c2b496f865391ff513855da

Left axis: Lower part of the eigenvalue spectrum of the Liouvillian as a function of , with Δ=0.7 (log scale). Data point colour indicates the eigenvalue of the corresponding eigenoperator under rotation. Black vertical line: location of the 2^nd bifurcation. Right axis: average steady-state photon occupation number (log scale). The behaviour for p=3, 4, 5 and 6 is shown in plots (a), (b, (c), and (d) respectively. The red-dotted vertical lines in (d) show two particular values analysed in more detail in figures <ref> and <ref>.

2012.10149

Lio_spectrum.jpg

0.44133

19ffdb8e8e344d099fd10f8726a30a06

Photon numbers in the steady state as a function of for Δ = 1, p=6 with ω_J=6ω_0 and ω_0 /γ= 1×10^3 with (left panel) and without (right panel) the RWA. The colour (on a log-scale) indicates P_n=⟨ n|ρ|n⟩, also shown are the average photon number (red-dashed line), together with the squared amplitudes of the stable (solid white lines) and unstable (dashed white lines) fixed points.

2012.10149

RWA_comparison.jpg

0.433518

9325a639b6ed4c14b85199d796c61021

Average occupation number (blue) shown together with (a) the lowest part of the Liouvillian eigenspectrum together with (b) the extracted rates for γ_VN / γ = 0.05, Δ = 0.7, p=6. The corresponding plots obtained without including voltage noise are shown in figures <ref>(d) and <ref>(b).

2012.10149

Voltage_Noise.jpg

0.536691

ae12c07fa41248b48de2a8c6e78d80fd

Wigner densities of the steady state. Overlaid are streamlines of the coherent state drift terms (arrows), and the stable/unstable fixed points in black/red. The panels show p=6, Δ = 1.2 with / ^(T)≈[0.8, 1.1, 1.6] respectively. The WD is proportional to the intensity of the blue colour. Inset: ⟨ n ⟩ as a function of , dots indicate the values used in the main plots.

2012.10149

Wigner_functions_4.jpg

0.421387

e18daf6b398f4013863afb9b1167fec8

(a) Schematic diagram of the circuit realisation of the model system we consider. An LC oscillator with frequency ω=√(1/LC) is driven at a frequency ω_J=2eV/ħ by a voltage-biased Josephson junction, characterised by the Josephson energy . The oscillator is assumed to be damped at a rate γ. (b) Sketch of the time-dependent potential in the Hamiltonian. It consists of a harmonic quadratic part and a moving sinusoidal potential <cit.>.

2012.10149

circuit.jpg

0.422894

732032279e8f430395803ff4ff850953

The DSA for the MAS on the right. All agents in the MAS are homogeneous and operate under DSA, but the figure shows the DSA components for only agent i. The sensed state of agent i's j^th neighbor is denoted as S_i,j. The AC, BC, and DM take as input the state of the agent and its neighbors.

2012.10153

DSA_net.jpg

0.479651

b2d62e0321b647a99a6805b019ab7506

Voltage graph at node 4 of the MG network.

2012.10153

node_4_legend_n.jpg

0.397772

51acee1e739f4e8c96945bf4b99b4797

2012.10155

ILC1mssm-finalH20-allobs1-nogluino-long-predicted-gauginos-probed-plot.jpg

0.42621

97f4ca91c7204136a4c47a5ea65d13be

2012.10155

ILC1mssm-finalH20-allobs3-nogluino-long-predicted-masses-inclg-incltrue-probed-plot.jpg

0.470414

e2934ef30a5b44c19dd868b5cc881967

2012.10155

ILC1mssm-finalH20-allobs3-nogluino-long-runningplot.jpg

0.398253

34e2413c7a5641008ec9d3ec2758593f

2012.10155

exclusion_complete_higgsino.jpg

0.386529

bacddf245dd8484f9e2cc14c24f94086

2012.10155

exclusion_complete_wino.jpg

0.440053

8d17f19780914b9f8c04b08d209e2790

2012.10155

nGMM1-test1-M1M2M3-runningplot.jpg

0.429395

db1a7ffdf53141ee8124f7649ee81749

2012.10155

nGMM1mssm-finalI20-allobs3-nogluino-long-runningplot.jpg

0.416514

a749b450bcfb4bfa91b99b921dc68433

Residual calculated from equation <ref>.

2012.10158

Residual_div_error.jpg

0.451259

b3d706ff2d90462ea2044d29020496b7

TES Pulse area histogram (black circles) for a strongly attenuated pulsed diode laser at 820 nm. Dashed red line is the model comprised of a sum of 16 Gaussian curves (see S3 in Supplementary Material). There are no peaks associated with 0 photons due to the triggering requirement, as explained in the text. Note that the last 2 Gaussian curves are not visible in the figure due to their low amplitude.

2012.10158

area_histogram_16_final.jpg

0.465265

137601b99ab24a73998cfb86a52bc5b8

TES pulse detailed with measurements our FPGA can perform. The solid blue line is the TES pulse and the solid red line is the TES pulse slope (amplified 1000× for clarity).

2012.10158

detailed_trace.jpg

0.4267

7560aeeda7a04171ab5d9ddaf45d99d1

χ_R^2 for our model M as a function of the number of bins used in the area histogram.

2012.10158

redchi_bin_number.jpg

0.397764

dfe21f63462248c2af66cee855977796

One specific simulation case of JueWuDraft against with HWR strategy, where JueWuDraft takes the first move.

2012.10171

Heroes_Pick.jpg

0.419194

87d4184994e34dc481228a7022e6e69e

MCTS for drafting process. Each simulation contains four steps: selection, evaluation, expansion and back-propagation, which are listed on the left. At the back-propagation step, the returned value will be added with a win-rate of this round when a round is end. After the search is complete, probabilities π is returned (proportional to C(s), the visit count of each node, and τ is a parameter controlling temperature), which is shown on the right.

2012.10171

MCTS.jpg

0.562298

b2d640402118401985902e3d30e636aa

Value propagation

2012.10171

Multi_Round_Value_Propagation.jpg

0.522326

560ecb7075724971a6c7ad098ce9084e

Overall Training Framework. The total framework consists of 4 modules: data sampler, sample pool, neural network trainer, model pool.

2012.10171

Overall_Training_Framework.jpg

0.54039

f34b7d509adc4436b3ea74d5a308632b

State vector configuration for policy and value network. It consists of three parts: heroes indexes of the current round; history draft information; the related game information (e.g., current round, whose turn.)

2012.10171

Vector.jpg

0.469624

262171ed4b3d4229ba63385d9b7be5af

Ablation study for key components.These experiments use a specific setup: 3-round game on Human Dataset, taking HWR as a comparison method.

2012.10171

ablation_new.jpg

0.424492

e9c61eed63fd407f97d051ce5ea15ff3

Screenshot of hero drafting phase in Honor of Kings. The left column shows heroes picked by ally camp, and the right column shows heroes picked by enemy camp. Drafting alternates between two teams until all players have selected one heroes, which makes up a complete lineup.

2012.10171

screenshoot.jpg

0.414367

9cf5fa18250d41818a6e4eef139f97c4

Left: Brightness of expected sources in AIA 131 and 94Å, given the size, location, and electron density of the thermal X-ray source. Middle: AIA observations. Right: Pre-flare background-subtracted observed emission.

2012.10179

aia_prediction_cbar.jpg

0.533968

6c80b012ac65488cbba34e6aab12857c

The flare of May 1, 2013, was observed from many perspectives. This diagram imagines looking down on the ecliptic; solid vectors point towards the satellites, and dashed lines represent the half of the Sun visible from each perspective.

2012.10179

fig1new.jpg