title
stringlengths 6
244
| abstract
stringlengths 19
5.09k
| label
stringclasses 10
values |
|---|---|---|
Application of Bayesian Dynamic Linear Models to Random Allocation
Clinical Trials | Random allocation models used in clinical trials aid researchers in
determining which of a particular treatment provides the best results by
reducing bias between groups. Often however, this determination leaves
researchers battling ethical issues of providing patients with unfavorable
treatments. Many methods such as Play the Winner and Randomized Play the Winner
Rule have historically been utilized to determine patient allocation, however,
these methods are prone to the increased assignment of unfavorable treatments.
Recently a new Bayesian Method using Decreasingly Informative Priors has been
proposed by \citep{sabo2014adaptive}, and later \citep{donahue2020allocation}.
Yet this method can be time consuming if MCMC methods are required. We propose
the use of a new method which uses Dynamic Linear Model (DLM)
\citep{harrison1999bayesian} to increase allocation speed while also decreasing
patient allocation samples necessary to identify the more favorable treatment.
Furthermore, a sensitivity analysis is conducted on multiple parameters.
Finally, a Bayes Factor is calculated to determine the proportion of unused
patient budget remaining at a specified cut off and this will be used to
determine decisive evidence in favor of the better treatment.
| stat |
Optimal Replacement Policy under Cumulative Damage Model and Strength
Degradation with Applications | In many real-life scenarios, system failure depends on dynamic
stress-strength interference, where strength degrades and stress accumulates
concurrently over time. In this paper, we consider the problem of finding an
optimal replacement strategy that balances the cost of replacement with the
cost of failure and results in a minimum expected cost per unit time under
cumulative damage model with strength degradation. The existing recommendations
are applicable only under restricted distributional assumptions and/or with
fixed strength. As theoretical evaluation of the expected cost per unit time
turns out to be very complicated, a simulation-based algorithm is proposed to
evaluate the expected cost rate and find the optimal replacement strategy. The
proposed method is easy to implement having wider domain of application. For
illustration, the proposed method is applied to real case studies on mailbox
and cell-phone battery experiments.
| stat |
A spectral-based framework for hypothesis testing in populations of
networks | In this paper, we propose a new spectral-based approach to hypothesis testing
for populations of networks. The primary goal is to develop a test to determine
whether two given samples of networks come from the same random model or
distribution. Our test statistic is based on the trace of the third order for a
centered and scaled adjacency matrix, which we prove converges to the standard
normal distribution as the number of nodes tends to infinity. The asymptotic
power guarantee of the test is also provided. The proper interplay between the
number of networks and the number of nodes for each network is explored in
characterizing the theoretical properties of the proposed testing statistics.
Our tests are applicable to both binary and weighted networks, operate under a
very general framework where the networks are allowed to be large and sparse,
and can be extended to multiple-sample testing. We provide an extensive
simulation study to demonstrate the superior performance of our test over
existing methods and apply our test to three real datasets.
| stat |
Approximate Bayesian Computation via Population Monte Carlo and
Classification | Approximate Bayesian computation (ABC) methods can be used to sample from
posterior distributions when the likelihood function is unavailable or
intractable, as is often the case in biological systems. ABC methods suffer
from inefficient particle proposals in high dimensions, and subjectivity in the
choice of summary statistics, discrepancy measure, and error tolerance.
Sequential Monte Carlo (SMC) methods have been combined with ABC to improve the
efficiency of particle proposals, but suffer from subjectivity and require many
simulations from the likelihood function. Likelihood-Free Inference by Ratio
Estimation (LFIRE) leverages classification to estimate the posterior density
directly but does not explore the parameter space efficiently. This work
proposes a classification approach that approximates population Monte Carlo
(PMC), where model class probabilities from classification are used to update
particle weights. This approach, called Classification-PMC, blends adaptive
proposals and classification, efficiently producing samples from the posterior
without subjectivity. We show through a simulation study that
Classification-PMC outperforms two state-of-the-art methods: ratio estimation
and SMC ABC when it is computationally difficult to simulate from the
likelihood.
| stat |
A Spectral Regularizer for Unsupervised Disentanglement | A generative model with a disentangled representation allows for independent
control over different aspects of the output. Learning disentangled
representations has been a recent topic of great interest, but it remains
poorly understood. We show that even for GANs that do not possess disentangled
representations, one can find curved trajectories in latent space over which
local disentanglement occurs. These trajectories are found by iteratively
following the leading right-singular vectors of the Jacobian of the generator
with respect to its input. Based on this insight, we describe an efficient
regularizer that aligns these vectors with the coordinate axes, and show that
it can be used to induce disentangled representations in GANs, in a completely
unsupervised manner.
| stat |
Scalable Bayesian regression in high dimensions with multiple data
sources | Applications of high-dimensional regression often involve multiple sources or
types of covariates. We propose methodology for this setting, emphasizing the
"wide data" regime with large total dimensionality p and sample size n<<p. We
focus on a flexible ridge-type prior with shrinkage levels that are specific to
each data type or source and that are set automatically by empirical Bayes. All
estimation, including setting of shrinkage levels, is formulated mainly in
terms of inner product matrices of size n x n. This renders computation
efficient in the wide data regime and allows scaling to problems with millions
of features. Furthermore, the proposed procedures are free of user-set tuning
parameters. We show how sparsity can be achieved by post-processing of the
Bayesian output via constrained minimization of a certain Kullback-Leibler
divergence. This yields sparse solutions with adaptive, source-specific
shrinkage, including a closed-form variant that scales to very large p. We
present empirical results from a simulation study based on real data and a case
study in Alzheimer's disease involving millions of features and multiple data
sources.
| stat |
Using In-Game Shot Trajectories to Better Understand Defensive Impact in
the NBA | As 3-point shooting in the NBA continues to increase, the importance of
perimeter defense has never been greater. Perimeter defenders are often
evaluated by their ability to tightly contest shots, but how exactly does
contesting a jump shot cause a decrease in expected shooting percentage, and
can we use this insight to better assess perimeter defender ability? In this
paper we analyze over 50,000 shot trajectories from the NBA to explain why, in
terms of impact on shot trajectories, shooters tend to miss more when tightly
contested. We present a variety of results derived from this shot trajectory
data. Additionally, pairing trajectory data with features such as defender
height, distance, and contest angle, we are able to evaluate not just perimeter
defenders, but also shooters' resilience to defensive pressure. Utilizing shot
trajectories and corresponding modeled shot-make probabilities, we are able to
create perimeter defensive metrics that are more accurate and less variable
than traditional metrics like opponent field goal percentage.
| stat |
Two seemingly paradoxical results in linear models: the variance
inflation factor and the analysis of covariance | A result from a standard linear model course is that the variance of the
ordinary least squares (OLS) coefficient of a variable will never decrease when
including additional covariates. The variance inflation factor (VIF) measures
the increase of the variance. Another result from a standard linear model or
experimental design course is that including additional covariates in a linear
model of the outcome on the treatment indicator will never increase the
variance of the OLS coefficient of the treatment at least asymptotically. This
technique is called the analysis of covariance (ANCOVA), which is often used to
improve the efficiency of treatment effect estimation. So we have two
paradoxical results: adding covariates never decreases the variance in the
first result but never increases the variance in the second result. In fact,
these two results are derived under different assumptions. More precisely, the
VIF result conditions on the treatment indicators but the ANCOVA result
averages over them. Comparing the estimators with and without adjusting for
additional covariates in a completely randomized experiment, I show that the
former has smaller variance averaging over the treatment indicators, and the
latter has smaller variance at the cost of a larger bias conditioning on the
treatment indicators. Therefore, there is no real paradox.
| stat |
Improving Bayesian Local Spatial Models in Large Data Sets | Environmental processes resolved at a sufficiently small scale in space and
time will inevitably display non-stationary behavior. Such processes are both
challenging to model and computationally expensive when the data size is large.
Instead of modeling the global non-stationarity explicitly, local models can be
applied to disjoint regions of the domain. The choice of the size of these
regions is dictated by a bias-variance trade-off; large regions will have
smaller variance and larger bias, whereas small regions will have higher
variance and smaller bias. From both the modeling and computational point of
view, small regions are preferable to better accommodate the non-stationarity.
However, in practice, large regions are necessary to control the variance. We
propose a novel Bayesian three-step approach that allows for smaller regions
without compromising the increase of the variance that would follow. We are
able to propagate the uncertainty from one step to the next without issues
caused by reusing the data. The improvement in inference also results in
improved prediction, as our simulated example shows. We illustrate this new
approach on a data set of simulated high-resolution wind speed data over Saudi
Arabia.
| stat |
Leveraging Auxiliary Information on Marginal Distributions in
Nonignorable Models for Item and Unit Nonresponse | Often, government agencies and survey organizations know the population
counts or percentages for some of the variables in a survey. These may be
available from auxiliary sources, for example, administrative databases or
other high quality surveys. We present and illustrate a model-based framework
for leveraging such auxiliary marginal information when handling unit and item
nonresponse. We show how one can use the margins to specify different
missingness mechanisms for each type of nonresponse. We use the framework to
impute missing values in voter turnout in a subset of data from the U.S.\
Current Population Survey (CPS). In doing so, we examine the sensitivity of
results to different assumptions about the unit and item nonresponse.
| stat |
Efficient Change-Point Detection for Tackling Piecewise-Stationary
Bandits | We introduce GLR-klUCB, a novel algorithm for the piecewise iid
non-stationary bandit problem with bounded rewards. This algorithm combines an
efficient bandit algorithm, kl-UCB, with an efficient, parameter-free,
changepoint detector, the Bernoulli Generalized Likelihood Ratio Test, for
which we provide new theoretical guarantees of independent interest. Unlike
previous non-stationary bandit algorithms using a change-point detector,
GLR-klUCB does not need to be calibrated based on prior knowledge on the arms'
means. We prove that this algorithm can attain a $O(\sqrt{TA
\Upsilon_T\log(T)})$ regret in $T$ rounds on some "easy" instances, where A is
the number of arms and $\Upsilon_T$ the number of change-points, without prior
knowledge of $\Upsilon_T$. In contrast with recently proposed algorithms that
are agnostic to $\Upsilon_T$, we perform a numerical study showing that
GLR-klUCB is also very efficient in practice, beyond easy instances.
| stat |
Probabilistic water demand forecasting using quantile regression
algorithms | Machine and statistical learning algorithms can be reliably automated and
applied at scale. Therefore, they can constitute a considerable asset for
designing practical forecasting systems, such as those related to urban water
demand. Quantile regression algorithms are statistical and machine learning
algorithms that can provide probabilistic forecasts in a straightforward way,
and have not been applied so far for urban water demand forecasting. In this
work, we aim to fill this gap by automating and extensively comparing several
quantile-regression-based practical systems for probabilistic one-day ahead
urban water demand forecasting. For designing the practical systems, we use
five individual algorithms (i.e., the quantile regression, linear boosting,
generalized random forest, gradient boosting machine and quantile regression
neural network algorithms), their mean combiner and their median combiner. The
comparison is conducted by exploiting a large urban water flow dataset, as well
as several types of hydrometeorological time series (which are considered as
exogenous predictor variables in the forecasting setting). The results mostly
favour the practical systems designed using the linear boosting algorithm,
probably due to the presence of trends in the urban water flow time series. The
forecasts of the mean and median combiners are also found to be skilful in
general terms.
| stat |
Improving Subseasonal Forecasting in the Western U.S. with Machine
Learning | Water managers in the western United States (U.S.) rely on longterm forecasts
of temperature and precipitation to prepare for droughts and other wet weather
extremes. To improve the accuracy of these longterm forecasts, the U.S. Bureau
of Reclamation and the National Oceanic and Atmospheric Administration (NOAA)
launched the Subseasonal Climate Forecast Rodeo, a year-long real-time
forecasting challenge in which participants aimed to skillfully predict
temperature and precipitation in the western U.S. two to four weeks and four to
six weeks in advance. Here we present and evaluate our machine learning
approach to the Rodeo and release our SubseasonalRodeo dataset, collected to
train and evaluate our forecasting system.
Our system is an ensemble of two regression models. The first integrates the
diverse collection of meteorological measurements and dynamic model forecasts
in the SubseasonalRodeo dataset and prunes irrelevant predictors using a
customized multitask model selection procedure. The second uses only historical
measurements of the target variable (temperature or precipitation) and
introduces multitask nearest neighbor features into a weighted local linear
regression. Each model alone is significantly more accurate than the debiased
operational U.S. Climate Forecasting System (CFSv2), and our ensemble skill
exceeds that of the top Rodeo competitor for each target variable and forecast
horizon. Moreover, over 2011-2018, an ensemble of our regression models and
debiased CFSv2 improves debiased CFSv2 skill by 40-50% for temperature and
129-169% for precipitation. We hope that both our dataset and our methods will
help to advance the state of the art in subseasonal forecasting.
| stat |
Correlated functional models with derivative information for modeling
MFS data on rock art paintings | Microfading Spectrometry (MFS) is a method for assessing light sensitivity
color (spectral) variations of cultural heritage objects. Each measured point
on the surface gives rise to a time-series of stochastic observations that
represents color fading over time. Color degradation is expected to be
non-decreasing as a function of time and stabilize eventually. These properties
can be expressed in terms of the derivatives of the functions. In this work, we
propose spatially correlated splines-based time-varying functions and their
derivatives for modeling and predicting MFS data collected on the surface of
rock art paintings. The correlation among the splines models is modeled using
Gaussian process priors over the spline coefficients across time-series. A
multivariate covariance function in a Gaussian process allows the use of
trichromatic image color variables jointly with spatial locations as inputs to
evaluate the correlation among time-series, and demonstrated the colorimetric
variables as useful for predicting new color fading time-series. Furthermore,
modeling the derivative of the model and its sign demonstrated to be beneficial
in terms of both predictive performance and application-specific
interpretability.
| stat |
A Critical Assessment of Some Recent Work on COVID-19 | I tentatively re-analyze data from two well-publicized studies on COVID-19,
namely the Charit\'{e} "viral load in children" and the Bonn "seroprevalence in
Heinsberg/Gangelt" study, from information available in the preprints. The
studies have the following in common:
- They received worldwide attention and arguably had policy impact.
- The thrusts of their findings align with the respective lead authors'
(different) public stances on appropriate response to COVID-19.
- Tentatively, my reading of the Gangelt study neutralizes its thrust, and my
reading of the Charit\'{e} study reverses it.
The exercise may aid in placing these studies in the literature. With all
caveats that apply to n=2 quickfire analyses based off preprints, one also
wonders whether it illustrates inadvertent effects of "researcher degrees of
freedom."
| stat |
Holdout-Based Fidelity and Privacy Assessment of Mixed-Type Synthetic
Data | AI-based data synthesis has seen rapid progress over the last several years,
and is increasingly recognized for its promise to enable privacy-respecting
high-fidelity data sharing. However, adequately evaluating the quality of
generated synthetic datasets is still an open challenge. We introduce and
demonstrate a holdout-based empirical assessment framework for quantifying the
fidelity as well as the privacy risk of synthetic data solutions for mixed-type
tabular data. Measuring fidelity is based on statistical distances of
lower-dimensional marginal distributions, which provide a model-free and
easy-to-communicate empirical metric for the representativeness of a synthetic
dataset. Privacy risk is assessed by calculating the individual-level distances
to closest record with respect to the training data. By showing that the
synthetic samples are just as close to the training as to the holdout data, we
yield strong evidence that the synthesizer indeed learned to generalize
patterns and is independent of individual training records. We demonstrate the
presented framework for seven distinct synthetic data solutions across four
mixed-type datasets and compare these to more traditional statistical
disclosure techniques. The results highlight the need to systematically assess
the fidelity just as well as the privacy of these emerging class of synthetic
data generators.
| stat |
Conditional independence testing via weighted partial copulas and
nearest neighbors | This paper introduces the \textit{weighted partial copula} function for
testing conditional independence. The proposed test procedure results from
these two ingredients: (i) the test statistic is an explicit Cramer-von Mises
transformation of the \textit{weighted partial copula}, (ii) the regions of
rejection are computed using a bootstrap procedure which mimics conditional
independence by generating samples from the product measure of the estimated
conditional marginals. Under conditional independence, the weak convergence of
the \textit{weighted partial copula proces}s is established when the marginals
are estimated using a smoothed local linear estimator. Finally, an experimental
section demonstrates that the proposed test has competitive power compared to
recent state-of-the-art methods such as kernel-based test.
| stat |
Robustly Disentangled Causal Mechanisms: Validating Deep Representations
for Interventional Robustness | The ability to learn disentangled representations that split underlying
sources of variation in high dimensional, unstructured data is important for
data efficient and robust use of neural networks. While various approaches
aiming towards this goal have been proposed in recent times, a commonly
accepted definition and validation procedure is missing. We provide a causal
perspective on representation learning which covers disentanglement and domain
shift robustness as special cases. Our causal framework allows us to introduce
a new metric for the quantitative evaluation of deep latent variable models. We
show how this metric can be estimated from labeled observational data and
further provide an efficient estimation algorithm that scales linearly in the
dataset size.
| stat |
Kalman Filtering with Gaussian Processes Measurement Noise | Real-world measurement noise in applications like robotics is often
correlated in time, but we typically assume i.i.d. Gaussian noise for
filtering. We propose general Gaussian Processes as a non-parametric model for
correlated measurement noise that is flexible enough to accurately reflect
correlation in time, yet simple enough to enable efficient computation. We show
that this model accurately reflects the measurement noise resulting from
vision-based Simultaneous Localization and Mapping (SLAM), and argue that it
provides a flexible means of modeling measurement noise for a wide variety of
sensor systems and perception algorithms. We then extend existing results for
Kalman filtering with autoregressive processes to more general Gaussian
Processes, and demonstrate the improved performance of our approach.
| stat |
Tighter expected generalization error bounds via Wasserstein distance | In this work, we introduce several expected generalization error bounds based
on the Wasserstein distance. More precisely, we present full-dataset,
single-letter, and random-subset bounds on both the standard setting and the
randomized-subsample setting from Steinke and Zakynthinou [2020]. Moreover, we
show that, when the loss function is bounded, these bounds recover from below
(and thus are tighter than) current bounds based on the relative entropy and,
for the standard setting, generate new, non-vacuous bounds also based on the
relative entropy. Then, we show how similar bounds featuring the backward
channel can be derived with the proposed proof techniques. Finally, we show how
various new bounds based on different information measures (e.g., the lautum
information or several $f$-divergences) can be derived from the presented
bounds.
| stat |
Joint Concordance Index | Existing metrics in competing risks survival analysis such as concordance and
accuracy do not evaluate a model's ability to jointly predict the event type
and the event time. To address these limitations, we propose a new metric,
which we call the joint concordance. The joint concordance measures a model's
ability to predict the overall risk profile, i.e., risk of death from different
event types. We develop a consistent estimator for the new metric that accounts
for the censoring bias. We use the new metric to develop a variable importance
ranking approach. Using the real and synthetic data experiments, we show that
models selected using the existing metrics are worse than those selected using
joint concordance at jointly predicting the event type and event time. We show
that the existing approaches for variable importance ranking often fail to
recognize the importance of the event-specific risk factors, whereas, the
proposed approach does not, since it compares risk factors based on their
contribution to the prediction of the different event-types. To summarize,
joint concordance is helpful for model comparisons and variable importance
ranking and has the potential to impact applications such as
risk-stratification and treatment planning in multimorbid populations.
| stat |
State-domain Change Point Detection for Nonlinear Time Series Regression | Change point detection in time series has attracted substantial interest, but
most of the existing results have been focused on detecting change points in
the time domain. This paper considers the situation where nonlinear time series
have potential change points in the state domain. We apply a density-weighted
anti-symmetric kernel function to the state domain and therefore propose a
nonparametric procedure to test the existence of change points. When the
existence of change points is affirmative, we further introduce an algorithm to
estimate their number together with locations and show the convergence result
on the estimation procedure. A real dataset of German daily confirmed cases of
COVID-19 is used to illustrate our results.
| stat |
BayCANN: Streamlining Bayesian Calibration with Artificial Neural
Network Metamodeling | Purpose: Bayesian calibration is theoretically superior to standard
direct-search algorithm because it can reveal the full joint posterior
distribution of the calibrated parameters. However, to date, Bayesian
calibration has not been used often in health decision sciences due to
practical and computational burdens. In this paper we propose to use artificial
neural networks (ANN) as one solution to these limitations.
Methods: Bayesian Calibration using Artificial Neural Networks (BayCANN)
involves (1) training an ANN metamodel on a sample of model inputs and outputs,
and (2) then calibrating the trained ANN metamodel instead of the full model in
a probabilistic programming language to obtain the posterior joint distribution
of the calibrated parameters. We demonstrate BayCANN by calibrating a natural
history model of colorectal cancer to adenoma prevalence and cancer incidence
data. In addition, we compare the efficiency and accuracy of BayCANN against
performing a Bayesian calibration directly on the simulation model using an
incremental mixture importance sampling (IMIS) algorithm.
Results: BayCANN was generally more accurate than IMIS in recovering the
"true" parameter values. The ratio of the absolute ANN deviation from the truth
compared to IMIS for eight out of the nine calibrated parameters were less than
one indicating that BayCANN was more accurate than IMIS. In addition, BayCANN
took about 15 minutes total compared to the IMIS method which took 80 minutes.
Conclusions: In our case study, BayCANN was more accurate than IMIS and was
five-folds faster. Because BayCANN does not depend on the structure of the
simulation model, it can be adapted to models of various levels of complexity
with minor changes to its structure. We provide BayCANN's open-source
implementation in R.
| stat |
Two Simple Ways to Learn Individual Fairness Metrics from Data | Individual fairness is an intuitive definition of algorithmic fairness that
addresses some of the drawbacks of group fairness. Despite its benefits, it
depends on a task specific fair metric that encodes our intuition of what is
fair and unfair for the ML task at hand, and the lack of a widely accepted fair
metric for many ML tasks is the main barrier to broader adoption of individual
fairness. In this paper, we present two simple ways to learn fair metrics from
a variety of data types. We show empirically that fair training with the
learned metrics leads to improved fairness on three machine learning tasks
susceptible to gender and racial biases. We also provide theoretical guarantees
on the statistical performance of both approaches.
| stat |
Learning High-dimensional Gaussian Graphical Models under Total
Positivity without Adjustment of Tuning Parameters | We consider the problem of estimating an undirected Gaussian graphical model
when the underlying distribution is multivariate totally positive of order 2
(MTP2), a strong form of positive dependence. Such distributions are relevant
for example for portfolio selection, since assets are usually positively
dependent. A large body of methods have been proposed for learning undirected
graphical models without the MTP2 constraint. A major limitation of these
methods is that their structure recovery guarantees in the high-dimensional
setting usually require a particular choice of a tuning parameter, which is
unknown a priori in real world applications. We here propose a new method to
estimate the underlying undirected graphical model under MTP2 and show that it
is provably consistent in structure recovery without adjusting the tuning
parameters. This is achieved by a constraint-based estimator that infers the
structure of the underlying graphical model by testing the signs of the
empirical partial correlation coefficients. We evaluate the performance of our
estimator in simulations and on financial data.
| stat |
Explainable AI by BAPC -- Before and After correction Parameter
Comparison | By means of a local surrogate approach, an analytical method to yield
explanations of AI-predictions in the framework of regression models is
defined. In the case of the AI-model producing additive corrections to the
predictions of a base model, the explanations are delivered in the form of a
shift of its interpretable parameters as long as the AI- predictions are small
in a rigorously defined sense. Criteria are formulated giving a precise
relation between lost accuracy and lacking model fidelity. Two applications
show how physical or econometric parameters may be used to interpret the action
of neural network and random forest models in the sense of the underlying base
model. This is an extended version of our paper presented at the ISM 2020
conference, where we first introduced our new approach BAPC.
| stat |
Non-Gaussian component analysis: testing the dimension of the signal
subspace | Dimension reduction is a common strategy in multivariate data analysis which
seeks a subspace which contains all interesting features needed for the
subsequent analysis. Non-Gaussian component analysis attempts for this purpose
to divide the data into a non-Gaussian part, the signal, and a Gaussian part,
the noise. We will show that the simultaneous use of two scatter functionals
can be used for this purpose and suggest a bootstrap test to test the dimension
of the non-Gaussian subspace. Sequential application of the test can then for
example be used to estimate the signal dimension.
| stat |
Learning Grid Cells as Vector Representation of Self-Position Coupled
with Matrix Representation of Self-Motion | This paper proposes a representational model for grid cells. In this model,
the 2D self-position of the agent is represented by a high-dimensional vector,
and the 2D self-motion or displacement of the agent is represented by a matrix
that transforms the vector. Each component of the vector is a unit or a cell.
The model consists of the following three sub-models. (1) Vector-matrix
multiplication. The movement from the current position to the next position is
modeled by matrix-vector multiplication, i.e., the vector of the next position
is obtained by multiplying the matrix of the motion to the vector of the
current position. (2) Magnified local isometry. The angle between two nearby
vectors equals the Euclidean distance between the two corresponding positions
multiplied by a magnifying factor. (3) Global adjacency kernel. The inner
product between two vectors measures the adjacency between the two
corresponding positions, which is defined by a kernel function of the Euclidean
distance between the two positions. Our representational model has explicit
algebra and geometry. It can learn hexagon patterns of grid cells, and it is
capable of error correction, path integral and path planning.
| stat |
Coupled Markov chain Monte Carlo for high-dimensional regression with
Half-t priors | Continuous shrinkage priors are commonly used in Bayesian analysis of
high-dimensional data, due to both their computational advantages and favorable
statistical properties. We develop coupled Markov chain Monte Carlo (MCMC)
algorithms for Bayesian shrinkage regression in high dimensions. Following
Glynn & Rhee (2014), these couplings can be used in parallel computation
strategies and practical diagnostics of convergence. Focusing on a class of
shrinkage priors which includes the Horseshoe, we demonstrate the scalability
of the proposed couplings with data from a genome-wide association study with
2000 rows and 100,000 covariates. The results highlight the impact of the
shrinkage prior on the computational efficiency of the coupling procedure, and
motivate priors where the local precisions are Half-t distributed with degree
of freedom larger than one, which are statistically justifiable in terms of
posterior concentration, and lead to practical computations.
| stat |
Estimation of high-dimensional factor models and its application in
power data analysis | In dealing with high-dimensional data, factor models are often used for
reducing dimensions and extracting relevant information. The spectrum of
covariance matrices from power data exhibits two aspects: 1) bulk, which arises
from random noise or fluctuations and 2) spikes, which represents factors
caused by anomaly events. In this paper, we propose a new approach to the
estimation of high-dimensional factor models, minimizing the distance between
the empirical spectral density (ESD) of covariance matrices of the residuals of
power data that are obtained by subtracting principal components and the
limiting spectral density (LSD) from a multiplicative covariance structure
model. The free probability theory (FPT) is used to derive the spectral density
of the multiplicative covariance model, which efficiently solves the
computational difficulties. The proposed approach connects the estimation of
the number of factors to the LSD of covariance matrices of the residuals, which
provides estimators of the number of factors and the correlation structure
information in the residuals. Considering a lot of measurement noise is
contained in the power data and the correlation structure is complex for the
residuals, the approach prefers approaching the ESD of covariance matrices of
the residuals through a multiplicative covariance model, which avoids making
crude assumptions or simplifications on the complex structure of the data.
Theoretical studies show the proposed approach is robust against noise and
sensitive to the presence of weak factors. The synthetic data from IEEE 118-bus
power system is used to validate the effectiveness of the approach.
Furthermore, the application to the analysis of the real-world online
monitoring data in a power grid shows that the estimators in the approach can
be used to indicate the system behavior.
| stat |
Approximate Bayesian inference for a spatial point process model
exhibiting regularity and random aggregation | In this paper, we propose a doubly stochastic spatial point process model
with both aggregation and repulsion. This model combines the ideas behind
Strauss processes and log Gaussian Cox processes. The likelihood for this model
is not expressible in closed form but it is easy to simulate realisations under
the model. We therefore explain how to use approximate Bayesian computation
(ABC) to carry out statistical inference for this model. We suggest a method
for model validation based on posterior predictions and global envelopes. We
illustrate the ABC procedure and model validation approach using both simulated
point patterns and a real data example.
| stat |
Learning Gaussian Graphical Models with Ordered Weighted L1
Regularization | We address the task of identifying densely connected subsets of multivariate
Gaussian random variables within a graphical model framework. We propose two
novel estimators based on the Ordered Weighted $\ell_1$ (OWL) norm: 1) The
Graphical OWL (GOWL) is a penalized likelihood method that applies the OWL norm
to the lower triangle components of the precision matrix. 2) The
column-by-column Graphical OWL (ccGOWL) estimates the precision matrix by
performing OWL regularized linear regressions. Both methods can simultaneously
identify highly correlated groups of variables and control the sparsity in the
resulting precision matrix. We formulate GOWL such that it solves a composite
optimization problem and establish that the estimator has a unique global
solution. In addition, we prove sufficient grouping conditions for each column
of the ccGOWL precision matrix estimate. We propose proximal descent algorithms
to find the optimum for both estimators. For synthetic data where group
structure is present, the ccGOWL estimator requires significantly reduced
computation and achieves similar or greater accuracy than state-of-the-art
estimators. Timing comparisons are presented and demonstrates the superior
computational efficiency of the ccGOWL. We illustrate the grouping performance
of the ccGOWL method on a cancer gene expression data set and an equities data
set.
| stat |
Distributionally Robust Formulation and Model Selection for the
Graphical Lasso | Building on a recent framework for distributionally robust optimization, we
consider estimation of the inverse covariance matrix for multivariate data. We
provide a novel notion of a Wasserstein ambiguity set specifically tailored to
this estimation problem, leading to a tractable class of regularized
estimators. Special cases include penalized likelihood estimators for Gaussian
data, specifically the graphical lasso estimator. As a consequence of this
formulation, the radius of the Wasserstein ambiguity set is directly related to
the regularization parameter in the estimation problem. Using this
relationship, the level of robustness of the estimation procedure can be shown
to correspond to the level of confidence with which the ambiguity set contains
a distribution with the population covariance. Furthermore, a unique feature of
our formulation is that the radius can be expressed in closed-form as a
function of the ordinary sample covariance matrix. Taking advantage of this
finding, we develop a simple algorithm to determine a regularization parameter
for graphical lasso, using only the bootstrapped sample covariance matrices,
meaning that computationally expensive repeated evaluation of the graphical
lasso algorithm is not necessary. Alternatively, the distributionally robust
formulation can also quantify the robustness of the corresponding estimator if
one uses an off-the-shelf method such as cross-validation. Finally, we
numerically study the obtained regularization criterion and analyze the
robustness of other automated tuning procedures used in practice.
| stat |
Trainability and Accuracy of Neural Networks: An Interacting Particle
System Approach | Neural networks, a central tool in machine learning, have demonstrated
remarkable, high fidelity performance on image recognition and classification
tasks. These successes evince an ability to accurately represent high
dimensional functions, but rigorous results about the approximation error of
neural networks after training are few. Here we establish conditions for global
convergence of the standard optimization algorithm used in machine learning
applications, stochastic gradient descent (SGD), and quantify the scaling of
its error with the size of the network. This is done by reinterpreting SGD as
the evolution of a particle system with interactions governed by a potential
related to the objective or "loss" function used to train the network. We show
that, when the number $n$ of units is large, the empirical distribution of the
particles descends on a convex landscape towards the global minimum at a rate
independent of $n$, with a resulting approximation error that universally
scales as $O(n^{-1})$. These properties are established in the form of a Law of
Large Numbers and a Central Limit Theorem for the empirical distribution. Our
analysis also quantifies the scale and nature of the noise introduced by SGD
and provides guidelines for the step size and batch size to use when training a
neural network. We illustrate our findings on examples in which we train neural
networks to learn the energy function of the continuous 3-spin model on the
sphere. The approximation error scales as our analysis predicts in as high a
dimension as $d=25$.
| stat |
Truncated generalized extreme value distribution based EMOS model for
calibration of wind speed ensemble forecasts | In recent years, ensemble weather forecasting have become a routine at all
major weather prediction centres. These forecasts are obtained from multiple
runs of numerical weather prediction models with different initial conditions
or model parametrizations. However, ensemble forecasts can often be
underdispersive and also biased, so some kind of post-processing is needed to
account for these deficiencies. One of the most popular state of the art
statistical post-processing techniques is the ensemble model output statistics
(EMOS), which provides a full predictive distribution of the studied weather
quantity. We propose a novel EMOS model for calibrating wind speed ensemble
forecasts, where the predictive distribution is a generalized extreme value
(GEV) distribution left truncated at zero (TGEV). The truncation corrects the
disadvantage of the GEV distribution based EMOS models of occasionally
predicting negative wind speed values, without affecting its favorable
properties. The new model is tested on four data sets of wind speed ensemble
forecasts provided by three different ensemble prediction systems, covering
various geographical domains and time periods. The forecast skill of the TGEV
EMOS model is compared with the predictive performance of the truncated normal,
log-normal and GEV methods and the raw and climatological forecasts as well.
The results verify the advantageous properties of the novel TGEV EMOS approach.
| stat |
Train and You'll Miss It: Interactive Model Iteration with Weak
Supervision and Pre-Trained Embeddings | Our goal is to enable machine learning systems to be trained interactively.
This requires models that perform well and train quickly, without large amounts
of hand-labeled data. We take a step forward in this direction by borrowing
from weak supervision (WS), wherein models can be trained with noisy sources of
signal instead of hand-labeled data. But WS relies on training downstream deep
networks to extrapolate to unseen data points, which can take hours or days.
Pre-trained embeddings can remove this requirement. We do not use the
embeddings as features as in transfer learning (TL), which requires fine-tuning
for high performance, but instead use them to define a distance function on the
data and extend WS source votes to nearby points. Theoretically, we provide a
series of results studying how performance scales with changes in source
coverage, source accuracy, and the Lipschitzness of label distributions in the
embedding space, and compare this rate to standard WS without extension and TL
without fine-tuning. On six benchmark NLP and video tasks, our method
outperforms WS without extension by 4.1 points, TL without fine-tuning by 12.8
points, and traditionally-supervised deep networks by 13.1 points, and comes
within 0.7 points of state-of-the-art weakly-supervised deep networks-all while
training in less than half a second.
| stat |
Selection of an engineering institution: Students perceptions of choice
characteristics and suitability under the COVID-19 pandemic | COVID19 has impacted Indian engineering institutions (EIs) enormously. It has
tightened its knot around EIs that forced their previous half shut shades
completely down to prevent the risk of spreading COVID19. In such a situation,
fetching new enrollments on EI campuses is a difficult and challenging task, as
students behavior and family preferences have changed drastically due to mental
stress and emotions attached to them. Consequently, it becomes a prerequisite
to examine the choice characteristics influencing the selection of EI during
the COVID-19 pandemic to make it normal for new enrollments.
The purpose of this study is to critically examine choice characteristics
that affect students choice for EI and consequently to explore relationships
between institutional characteristics and the suitability of EI during the
COVID19 pandemic across students characteristics. The findings of this study
revealed dissimilarities across students characteristics regarding the
suitability of EIs under pandemic conditions. Regression analysis revealed that
EI characteristics such as proximity, image and reputation, quality education
and curriculum delivery have significantly contributed to suitability under
COVID19. At the micro level, multiple relationships were noted between EI
characteristics and the suitability of EI under the pandemic across students
characteristics. The study has successfully demonstrated how choice
characteristics can be executed to regulate the suitability of EI under the
COVID19 pandemic for the inclusion of diversity. It is useful for policy makers
and academicians to reposition EIs that fetch diversity during the pandemic.
This study is the first to provide insights into the performance of choice
characteristics and their relationship with the suitability of EIs under a
pandemic and can be a yardstick in administering new enrollments.
| stat |
Nonparametric Bayesian Lomax delegate racing for survival analysis with
competing risks | We propose Lomax delegate racing (LDR) to explicitly model the mechanism of
survival under competing risks and to interpret how the covariates accelerate
or decelerate the time to event. LDR explains non-monotonic covariate effects
by racing a potentially infinite number of sub-risks, and consequently relaxes
the ubiquitous proportional-hazards assumption which may be too restrictive.
Moreover, LDR is naturally able to model not only censoring, but also missing
event times or event types. For inference, we develop a Gibbs sampler under
data augmentation for moderately sized data, along with a stochastic gradient
descent maximum a posteriori inference algorithm for big data applications.
Illustrative experiments are provided on both synthetic and real datasets, and
comparison with various benchmark algorithms for survival analysis with
competing risks demonstrates distinguished performance of LDR.
| stat |
Sequential Gibbs Sampling Algorithm for Cognitive Diagnosis Models with
Many Attributes | Cognitive diagnosis models (CDMs) are useful statistical tools to provide
rich information relevant for intervention and learning. As a popular approach
to estimate and make inference of CDMs, the Markov chain Monte Carlo (MCMC)
algorithm is widely used in practice. However, when the number of attributes,
$K$, is large, the existing MCMC algorithm may become time-consuming, due to
the fact that $O(2^K)$ calculations are usually needed in the process of MCMC
sampling to get the conditional distribution for each attribute profile. To
overcome this computational issue, motivated by Culpepper and Hudson (2018), we
propose a computationally efficient sequential Gibbs sampling method, which
needs $O(K)$ calculations to sample each attribute profile. We use simulation
and real data examples to show the good finite-sample performance of the
proposed sequential Gibbs sampling, and its advantage over existing methods.
| stat |
Score-based likelihood ratios to evaluate forensic pattern evidence | In 2016, the European Network of Forensic Science Institutes (ENFSI)
published guidelines for the evaluation, interpretation and reporting of
scientific evidence. In the guidelines, ENFSI endorsed the use of the
likelihood ratio (LR) as a means to represent the probative value of most types
of evidence. While computing the value of a LR is practical in several forensic
disciplines, calculating an LR for pattern evidence such as fingerprints,
firearm and other toolmarks is particularly challenging because standard
statistical approaches are not applicable. Recent research suggests that
machine learning algorithms can summarize a potentially large set of features
into a single score which can then be used to quantify the similarity between
pattern samples. It is then possible to compute a score-based likelihood ratio
(SLR) and obtain an approximation to the value of the evidence, but research
has shown that the SLR can be quite different from the LR not only in size but
also in direction. We provide theoretical and empirical arguments that under
reasonable assumptions, the SLR can be a practical tool for forensic
evaluations.
| stat |
Revisiting the random shift approach for testing in spatial statistics | We consider the problem of non-parametric testing of independence of two
components of a stationary bivariate spatial process. In particular, we revisit
the random shift approach that has become a standard method for testing the
independent superposition hypothesis in spatial statistics, and it is widely
used in a plethora of practical applications. However, this method has a
problem of liberality caused by breaking the marginal spatial correlation
structure due to the toroidal correction. This indeed causes that the
assumption of exchangability, which is essential for the Monte Carlo test to be
exact, is not fulfilled.
We present a number of permutation strategies and show that the random shift
with the variance correction brings a suitable improvement compared to the
torus correction in the random field case. It reduces the liberality and
achieves the largest power from all investigated variants. To obtain the
variance for the variance correction method, several approaches were studied.
The best results were achieved, for the sample covariance as the test
statistics, with the correction factor $1/n$. This corresponds to the
asymptotic order of the variance of the test statistics.
In the point process case, the problem of deviations from exchangeability is
far more complex and we propose an alternative strategy based on the mean cross
nearest-neighbor distance and torus correction. It reduces the liberality but
achieves slightly lower power than the usual cross $K$-function. Therefore we
recommend it, when the point patterns are clustered, where the cross
$K$-function achieves liberality.
| stat |
Analysis of the weighted kappa and its maximum with Markov moves | In this paper the notion of Markov move from Algebraic Statistics is used to
analyze the weighted kappa indices in rater agreement problems. In particular,
the problem of the maximum kappa and its dependence on the choice of the
weighting schemes are discussed. The Markov moves are also used in a simulated
annealing algorithm to actually find the configuration of maximum agreement.
| stat |
Streamlined Empirical Bayes Fitting of Linear Mixed Models in Mobile
Health | To effect behavior change a successful algorithm must make high-quality
decisions in real-time. For example, a mobile health (mHealth) application
designed to increase physical activity must make contextually relevant
suggestions to motivate users. While machine learning offers solutions for
certain stylized settings, such as when batch data can be processed offline,
there is a dearth of approaches which can deliver high-quality solutions under
the specific constraints of mHealth. We propose an algorithm which provides
users with contextualized and personalized physical activity suggestions. This
algorithm is able to overcome a challenge critical to mHealth that complex
models be trained efficiently. We propose a tractable streamlined empirical
Bayes procedure which fits linear mixed effects models in large-data settings.
Our procedure takes advantage of sparsity introduced by hierarchical random
effects to efficiently learn the posterior distribution of a linear mixed
effects model. A key contribution of this work is that we provide explicit
updates in order to learn both fixed effects, random effects and
hyper-parameter values. We demonstrate the success of this approach in a mobile
health (mHealth) reinforcement learning application, a domain in which fast
computations are crucial for real time interventions. Not only is our approach
computationally efficient, it is also easily implemented with closed form
matrix algebraic updates and we show improvements over state of the art
approaches both in speed and accuracy of up to 99% and 56% respectively.
| stat |
A Regression Discontinuity Design for Ordinal Running Variables:
Evaluating Central Bank Purchases of Corporate Bonds | Regression discontinuity (RD) is a widely used quasi-experimental design for
causal inference. In the standard RD, the assignment to treatment is determined
by a continuous pretreatment variable (i.e., running variable) falling above or
below a pre-fixed threshold. In the case of the corporate sector purchase
programme (CSPP) of the European Central Bank, which involves large-scale
purchases of securities issued by corporations in the euro area, such a
threshold can be defined in terms of an ordinal running variable. This feature
poses challenges to RD estimation due to the lack of a meaningful measure of
distance. To evaluate such program, this paper proposes an RD approach for
ordinal running variables under the local randomization framework. The proposal
first estimates an ordered probit model for the ordinal running variable. The
estimated probability of being assigned to treatment is then adopted as a
latent continuous running variable and used to identify a covariate-balanced
subsample around the threshold. Assuming local unconfoundedness of the
treatment in the subsample, an estimate of the effect of the program is
obtained by employing a weighted estimator of the average treatment effect. Two
weighting estimators---overlap weights and ATT weights---as well as their
augmented versions are considered. We apply the method to evaluate the causal
effect of the CSPP and find a statistically significant and negative effect on
corporate bond spreads at issuance.
| stat |
Transform-based particle filtering for elliptic Bayesian inverse
problems | We introduce optimal transport based resampling in adaptive SMC. We consider
elliptic inverse problems of inferring hydraulic conductivity from pressure
measurements. We consider two parametrizations of hydraulic conductivity: by
Gaussian random field, and by a set of scalar (non-)Gaussian distributed
parameters and Gaussian random fields. We show that for scalar parameters
optimal transport based SMC performs comparably to monomial based SMC but for
Gaussian high-dimensional random fields optimal transport based SMC outperforms
monomial based SMC. When comparing to ensemble Kalman inversion with mutation
(EKI), we observe that for Gaussian random fields, optimal transport based SMC
gives comparable or worse performance than EKI depending on the complexity of
the parametrization. For non-Gaussian distributed parameters optimal transport
based SMC outperforms EKI.
| stat |
A simple statistical approach to prediction in open high dimensional
chaotic systems | Two recent papers on prediction of chaotic systems, one on multi-view
embedding1 , and the second on prediction in projection2 provide empirical
evidence to support particular prediction methods for chaotic systems.
Multi-view embedding1 is a method of using several multivariate time series to
come up with an improved embedding based predictor of a chaotic time series.
Prediction in projection2 discusses how much smaller embeddings can provide
useful prediction even though they may not be able to resolve the dynamics of
the system. Both papers invoke a nearest neighbor3, or Lorenz method of
Analogue (LMA)4 approach to estimation. However with open high dimensional
chaotic systems there may be no very close nearest neighbor trajectories in a
history, so in this paper we add in the thread of linear response theory5,
although our approach is quite simple assuming that linear regressions6 on
multiple embeddings5 will be sufficient. The approach is thus to create linear
response models5 of multiple1 low dimensional embeddings2 to provide practical
methods of predicting in high dimensional, open chaotic systems. Some theory is
developed, mostly around two unproven conjectures to suggest methods of
prediction, and they are applied to prediction in the earth's climate system
(predicting regional rainfall in a small region) multiple seasons ahead and to
power a simulated automated trading program applied to three stock indexes, the
Dow Jones industrial average, the Dow Jones transportation average, and the Dow
Jones utility average, based on data from 1929 through 20077
| stat |
Predicting Residential Property Value in Catonsville, Maryland: A
Comparison of Multiple Regression Techniques | Predicting Residential Property Value in Catonsville, Maryland: A Comparison
of Multiple Regression Techniques
| stat |
Quantitative Understanding of VAE by Interpreting ELBO as Rate
Distortion Cost of Transform Coding | Variational autoencoder (VAE) estimates the posterior parameters (mean and
variance) of latent variables corresponding to each input data. While it is
used for many tasks, the transparency of the model is still an underlying
issue. This paper provides a quantitative understanding of VAE property by
interpreting VAE as a non-linearly scaled isometric embedding. According to the
Rate-distortion theory, the optimal transform coding is achieved by using a
PCA-like orthonormal transform where the transform space is isometric to the
input. From this analogy, we show theoretically and experimentally that VAE can
be mapped to an implicit isometric embedding with a scale factor derived from
the posterior parameter. As a result, we can estimate the data probabilities in
the input space from the prior, loss metrics, and corresponding posterior
parameters. In addition, the quantitative importance of each latent variable
can be evaluated like the eigenvalue of PCA.
| stat |
Nonparametric maximum likelihood estimation under a likelihood ratio
order | Comparison of two univariate distributions based on independent samples from
them is a fundamental problem in statistics, with applications in a wide
variety of scientific disciplines. In many situations, we might hypothesize
that the two distributions are stochastically ordered, meaning intuitively that
samples from one distribution tend to be larger than those from the other. One
type of stochastic order that arises in economics, biomedicine, and elsewhere
is the likelihood ratio order, also known as the density ratio order, in which
the ratio of the density functions of the two distributions is monotone
non-decreasing. In this article, we derive and study the nonparametric maximum
likelihood estimator of the individual distributions and the ratio of their
densities under the likelihood ratio order. Our work applies to discrete
distributions, continuous distributions, and mixed continuous-discrete
distributions. We demonstrate convergence in distribution of the estimator in
certain cases, and we illustrate our results using numerical experiments and an
analysis of a biomarker for predicting bacterial infection in children with
systemic inflammatory response syndrome.
| stat |
Preference Modeling with Context-Dependent Salient Features | We consider the problem of estimating a ranking on a set of items from noisy
pairwise comparisons given item features. We address the fact that pairwise
comparison data often reflects irrational choice, e.g. intransitivity. Our key
observation is that two items compared in isolation from other items may be
compared based on only a salient subset of features. Formalizing this
framework, we propose the salient feature preference model and prove a finite
sample complexity result for learning the parameters of our model and the
underlying ranking with maximum likelihood estimation. We also provide
empirical results that support our theoretical bounds and illustrate how our
model explains systematic intransitivity. Finally we demonstrate strong
performance of maximum likelihood estimation of our model on both synthetic
data and two real data sets: the UT Zappos50K data set and comparison data
about the compactness of legislative districts in the US.
| stat |
Variational Full Bayes Lasso: Knots Selection in Regression Splines | We develop a fully automatic Bayesian Lasso via variational inference. This
is a scalable procedure for approximating the posterior distribution. Special
attention is driven to the knot selection in regression spline. In order to
carry through our proposal, a full automatic variational Bayesian Lasso, a
Jefferey's prior is proposed for the hyperparameters and a decision theoretical
approach is introduced to decide if a knot is selected or not. Extensive
simulation studies were developed to ensure the effectiveness of the proposed
algorithms. The performance of the algorithms were also tested in some real
data sets, including data from the world pandemic Covid-19. Again, the
algorithms showed a very good performance in capturing the data structure.
| stat |
lpdensity: Local Polynomial Density Estimation and Inference | Density estimation and inference methods are widely used in empirical work.
When the underlying distribution has compact support, conventional kernel-based
density estimators are no longer consistent near or at the boundary because of
their well-known boundary bias. Alternative smoothing methods are available to
handle boundary points in density estimation, but they all require additional
tuning parameter choices or other typically ad hoc modifications depending on
the evaluation point and/or approach considered. This article discusses the R
and Stata package lpdensity implementing a novel local polynomial density
estimator proposed and studied in Cattaneo, Jansson, and Ma (2020, 2021), which
is boundary adaptive and involves only one tuning parameter. The methods
implemented also cover local polynomial estimation of the cumulative
distribution function and density derivatives. In addition to point estimation
and graphical procedures, the package offers consistent variance estimators,
mean squared error optimal bandwidth selection, robust bias-corrected
inference, and confidence bands construction, among other features. A
comparison with other density estimation packages available in R using a Monte
Carlo experiment is provided.
| stat |
A Robust Effect Size Index | Effect size indices are useful tools in study design and reporting because
they are unitless measures of association strength that do not depend on sample
size. Existing effect size indices are developed for particular parametric
models or population parameters. Here, we propose a robust effect size index
based on M-estimators. This approach yields an index that is very generalizable
because it is unitless across a wide range of models. We demonstrate that the
new index is a function of Cohen's $d$, $R^2$, and standardized log odds ratio
when each of the parametric models is correctly specified. We show that
existing effect size estimators are biased when the parametric models are
incorrect (e.g. under unknown heteroskedasticity). We provide simple formulas
to compute power and sample size and use simulations to assess the bias and
variance of the effect size estimator in finite samples. Because the new index
is invariant across models, it has the potential to make communication and
comprehension of effect size uniform across the behavioral sciences.
| stat |
Not All are Made Equal: Consistency of Weighted Averaging Estimators
Under Active Learning | Active learning seeks to build the best possible model with a budget of
labelled data by sequentially selecting the next point to label. However the
training set is no longer \textit{iid}, violating the conditions required by
existing consistency results. Inspired by the success of Stone's Theorem we aim
to regain consistency for weighted averaging estimators under active learning.
Based on ideas in \citet{dasgupta2012consistency}, our approach is to enforce a
small amount of random sampling by running an augmented version of the
underlying active learning algorithm. We generalize Stone's Theorem in the
noise free setting, proving consistency for well known classifiers such as
$k$-NN, histogram and kernel estimators under conditions which mirror classical
results. However in the presence of noise we can no longer deal with these
estimators in a unified manner; for some satisfying this condition also
guarantees sufficiency in the noisy case, while for others we can achieve near
perfect inconsistency while this condition holds. Finally we provide conditions
for consistency in the presence of noise, which give insight into why these
estimators can behave so differently under the combination of noise and active
learning.
| stat |
Understanding the spatial burden of gender-based violence: Modelling
patterns of violence in Nairobi, Kenya through geospatial information | We present statistical techniques for analyzing global positioning system
(GPS) data in order to understand, communicate about, and prevent patterns of
violence. In this pilot study, participants in Nairobi, Kenya were asked to
rate their safety at several locations, with the goal of predicting safety and
learning important patterns. These approaches are meant to help articulate
differences in experiences, fostering a discussion that will help communities
identify issues and policymakers develop safer communities. A generalized
linear mixed model incorporating spatial information taken from existing maps
of Kibera showed significant predictors of perceived lack of safety included
being alone and time of day; in debrief interviews, participants described
feeling unsafe in spaces with hiding places, disease carrying animals, and
dangerous individuals. This pilot study demonstrates promise for detecting
spatial patterns of violence, which appear to be confirmed by actual rates of
measured violence at schools. Several factors relevant to community building
consistently predict perceived safety and emerge in participants' qualitative
descriptions, telling a cohesive story about perceived safety and empowering
communication to community stakeholders.
| stat |
Extensions of Random Orthogonal Matrix Simulation for Targetting Kollo
Skewness | Modelling multivariate systems is important for many applications in
engineering and operational research. The multivariate distributions under
scrutiny usually have no analytic or closed form. Therefore their modelling
employs a numerical technique, typically multivariate simulations, which can
have very high dimensions. Random Orthogonal Matrix (ROM) simulation is a
method that has gained some popularity because of the absence of certain
simulation errors. Specifically, it exactly matches a target mean, covariance
matrix and certain higher moments with every simulation. This paper extends the
ROM simulation algorithm presented by Hanke et al. (2017), hereafter referred
to as HPSW, which matches the target mean, covariance matrix and Kollo skewness
vector exactly. Our first contribution is to establish necessary and sufficient
conditions for the HPSW algorithm to work. Our second contribution is to
develop a general approach for constructing admissible values in the HPSW. Our
third theoretical contribution is to analyse the effect of multivariate sample
concatenation on the target Kollo skewness. Finally, we illustrate the
extensions we develop here using a simulation study.
| stat |
Learning Sensor Placement from Demonstration for UAV networks | This work demonstrates how to leverage previous network expert demonstrations
of UAV deployment to automate the drones placement in civil applications.
Optimal UAV placement is an NP-complete problem: it requires a closed-form
utility function that defines the environment and the UAV constraints, it is
not unique and must be defined for each new UAV mission. This complex and
time-consuming process hinders the development of UAV-networks in civil
applications. We propose a method that leverages previous network expert
solutions of UAV-network deployment to learn the expert's untold utility
function form demonstrations only. This is especially interesting as it may be
difficult for the inspection expert to explicit his expertise into such a
function as it is too complex. Once learned, our model generates a utility
function which maxima match expert UAV locations. We test this method on a
Wi-Fi UAV network application inside a crowd simulator and reach similar
quality-of-service as the expert. We show that our method is not limited to
this UAV application and can be extended to other missions such as building
monitoring.
| stat |
Accumulations of Projections--A Unified Framework for Random Sketches in
Kernel Ridge Regression | Building a sketch of an n-by-n empirical kernel matrix is a common approach
to accelerate the computation of many kernel methods. In this paper, we propose
a unified framework of constructing sketching methods in kernel ridge
regression (KRR), which views the sketching matrix S as an accumulation of m
rescaled sub-sampling matrices with independent columns. Our framework
incorporates two commonly used sketching methods, sub-sampling sketches (known
as the Nystr\"om method) and sub-Gaussian sketches, as special cases with m=1
and m=infinity respectively. Under the new framework, we provide a unified
error analysis of sketching approximation and show that our accumulation scheme
improves the low accuracy of sub-sampling sketches when certain incoherence
characteristic is high, and accelerates the more accurate but computationally
heavier sub-Gaussian sketches. By optimally choosing the number m of
accumulations, we show that a best trade-off between computational efficiency
and statistical accuracy can be achieved. In practice, the sketching method can
be as efficiently implemented as the sub-sampling sketches, as only minor extra
matrix additions are needed. Our empirical evaluations also demonstrate that
the proposed method may attain the accuracy close to sub-Gaussian sketches,
while is as efficient as sub-sampling-based sketches.
| stat |
Bayesian Inference for Big Spatial Data Using Non-stationary Spectral
Simulation | It is increasingly understood that the assumption of stationarity is
unrealistic for many spatial processes. In this article, we combine dimension
expansion with a spectral method to model big non-stationary spatial fields in
a computationally efficient manner. Specifically, we use Mejia and
Rodriguez-Iturbe (1974)'s spectral simulation approach to simulate a spatial
process with a covariogram at locations that have an expanded dimension. We
introduce Bayesian hierarchical modelling to dimension expansion, which
originally has only been modeled using a method of moments approach. In
particular, we simulate from the posterior distribution using a collapsed Gibbs
sampler. Our method is both full rank and non-stationary, and can be applied to
big spatial data because it does not involve storing and inverting large
covariance matrices. Additionally, we have fewer parameters than many other
non-stationary spatial models. We demonstrate the wide applicability of our
approach using a simulation study, and an application using ozone data obtained
from the National Aeronautics and Space Administration (NASA).
| stat |
Modeling the marked presence-only data: a case study of estimating the
female sex worker size in Malawi | Continued fine-scale mapping of HIV/AIDS populations is needed to meet goals
set by global organizations like UNAIDS and WHO. Since key populations like
female sex workers (FSW), men who have sex with men (MSM), and people who
inject drugs often have higher prevalence of HIV, it is of interest to map
these specific key populations. However, key populations are typically
difficult (or impossible) to map directly due to social stigma and legal
issues, among other reasons. Instead, targeted surveys coupled with auxiliary
data can be used to estimate population size with reasonable confidence
intervals. One such study collected FSW data by interviewing a subset of venues
believed to house FSW and obtained accurate estimates of district-level venue
counts. These venues represent a spatial marked presence-only data set. A
calibrated-Bayesian model was developed to estimate the prevalence at a
fine-cell-level, extending the presence-only literature. The number of FSW at
approximately $1.5 \times 1.5$-km resolution and the corresponding credible
intervals are estimated, providing useful information for treating and
preventing HIV in these key populations.
| stat |
Multiplicative noise and heavy tails in stochastic optimization | Although stochastic optimization is central to modern machine learning, the
precise mechanisms underlying its success, and in particular, the precise role
of the stochasticity, still remain unclear. Modelling stochastic optimization
algorithms as discrete random recurrence relations, we show that multiplicative
noise, as it commonly arises due to variance in local rates of convergence,
results in heavy-tailed stationary behaviour in the parameters. A detailed
analysis is conducted for SGD applied to a simple linear regression problem,
followed by theoretical results for a much larger class of models (including
non-linear and non-convex) and optimizers (including momentum, Adam, and
stochastic Newton), demonstrating that our qualitative results hold much more
generally. In each case, we describe dependence on key factors, including step
size, batch size, and data variability, all of which exhibit similar
qualitative behavior to recent empirical results on state-of-the-art neural
network models from computer vision and natural language processing.
Furthermore, we empirically demonstrate how multiplicative noise and
heavy-tailed structure improve capacity for basin hopping and exploration of
non-convex loss surfaces, over commonly-considered stochastic dynamics with
only additive noise and light-tailed structure.
| stat |
Stochastic gradient Markov chain Monte Carlo | Markov chain Monte Carlo (MCMC) algorithms are generally regarded as the gold
standard technique for Bayesian inference. They are theoretically
well-understood and conceptually simple to apply in practice. The drawback of
MCMC is that in general performing exact inference requires all of the data to
be processed at each iteration of the algorithm. For large data sets, the
computational cost of MCMC can be prohibitive, which has led to recent
developments in scalable Monte Carlo algorithms that have a significantly lower
computational cost than standard MCMC. In this paper, we focus on a particular
class of scalable Monte Carlo algorithms, stochastic gradient Markov chain
Monte Carlo (SGMCMC) which utilises data subsampling techniques to reduce the
per-iteration cost of MCMC. We provide an introduction to some popular SGMCMC
algorithms and review the supporting theoretical results, as well as comparing
the efficiency of SGMCMC algorithms against MCMC on benchmark examples. The
supporting R code is available online.
| stat |
Uniform Rates of Convergence of Some Representations of Extremes : a
first approach | Uniform convergence rates are provided for asymptotic representations of
sample extremes. These bounds which are universal in the sense that they do not
depend on the extreme value index are meant to be extended to arbitrary samples
extremes in coming papers.
| stat |
Incorporating historical information to improve phase I clinical trial
designs | Incorporating historical data or real-world evidence has a great potential to
improve the efficiency of phase I clinical trials and to accelerate drug
development. For model-based designs, such as the continuous reassessment
method (CRM), this can be conveniently carried out by specifying a "skeleton,"
i.e., the prior estimate of dose limiting toxicity (DLT) probability at each
dose. In contrast, little work has been done to incorporate historical data or
real-world evidence into model-assisted designs, such as the Bayesian optimal
interval (BOIN), keyboard, and modified toxicity probability interval (mTPI)
designs. This has led to the misconception that model-assisted designs cannot
incorporate prior information. In this paper, we propose a unified framework
that allows for incorporating historical data or real-world evidence into
model-assisted designs. The proposed approach uses the well-established
"skeleton" approach, combined with the concept of prior effective sample size,
thus it is easy to understand and use. More importantly, our approach maintains
the hallmark of model-assisted designs: simplicity---the dose
escalation/de-escalation rule can be tabulated prior to the trial conduct.
Extensive simulation studies show that the proposed method can effectively
incorporate prior information to improve the operating characteristics of
model-assisted designs, similarly to model-based designs.
| stat |
Markov-Modulated Hawkes Processes for Sporadic and Bursty Event
Occurrences | Modeling event dynamics is central to many disciplines. Patterns in observed
event arrival times are commonly modeled using point processes. Such event
arrival data often exhibits self-exciting, heterogeneous and sporadic trends,
which is challenging for conventional models. It is reasonable to assume that
there exists a hidden state process that drives different event dynamics at
different states. In this paper, we propose a Markov Modulated Hawkes Process
(MMHP) model for learning such a mixture of event dynamics and develop
corresponding inference algorithms. Numerical experiments using synthetic data
demonstrate that MMHP with the proposed estimation algorithms consistently
recover the true hidden state process in simulations, while email data from a
large university and data from an animal behavior study show that the procedure
captures distinct event dynamics that reveal interesting social structures in
the real data.
| stat |
Principal Stratification for Advertising Experiments | Advertising experiments often suffer from noisy responses making precise
estimation of the average treatment effect (ATE) and evaluating ROI difficult.
We develop a principal stratification model that improves the precision of the
ATE by dividing the customers into three strata - those who buy regardless of
ad exposure, those who buy only if exposed to ads and those who do not buy
regardless. The method decreases the variance of the ATE by separating out the
typically large share of customers who never buy and therefore have individual
treatment effects that are exactly zero. Applying the procedure to 5 catalog
mailing experiments with sample sizes around 140,000 shows a reduction of
36-57% in the variance of the estimate. When we include pre-randomization
covariates that predict stratum membership, we find that estimates of
customers' past response to similar advertising are a good predictor of stratum
membership, even if such estimates are biased because past advertising was
targeted. Customers who have not purchased recently are also more likely to be
in the "never purchase" stratum. We provide simple summary statistics that
firms can compute from their own experiment data to determine if the procedure
is expected to be beneficial before applying it.
| stat |
Approximate Cross-validated Mean Estimates for Bayesian Hierarchical
Regression Models | We introduce a novel procedure for obtaining cross-validated predictive
estimates for Bayesian hierarchical regression models (BHRMs). Bayesian
hierarchical models are popular for their ability to model complex dependence
structures and provide probabilistic uncertainty estimates, but can be
computationally expensive to run. Cross-validation (CV) is therefore not a
common practice to evaluate the predictive performance of BHRMs. Our method
circumvents the need to re-run computationally costly estimation methods for
each cross-validation fold and makes CV more feasible for large BHRMs. By
conditioning on the variance-covariance parameters, we shift the CV problem
from probability-based sampling to a simple and familiar optimization problem.
In many cases, this produces estimates which are equivalent to full CV. We
provide theoretical results and demonstrate its efficacy on publicly available
data and in simulations.
| stat |
The information bottleneck and geometric clustering | The information bottleneck (IB) approach to clustering takes a joint
distribution $P\!\left(X,Y\right)$ and maps the data $X$ to cluster labels $T$
which retain maximal information about $Y$ (Tishby et al., 1999). This
objective results in an algorithm that clusters data points based upon the
similarity of their conditional distributions $P\!\left(Y\mid X\right)$. This
is in contrast to classic "geometric clustering'' algorithms such as $k$-means
and gaussian mixture models (GMMs) which take a set of observed data points
$\left\{ \mathbf{x}_{i}\right\} _{i=1:N}$ and cluster them based upon their
geometric (typically Euclidean) distance from one another. Here, we show how to
use the deterministic information bottleneck (DIB) (Strouse and Schwab, 2017),
a variant of IB, to perform geometric clustering, by choosing cluster labels
that preserve information about data point location on a smoothed dataset. We
also introduce a novel method to choose the number of clusters, based on
identifying solutions where the tradeoff between number of clusters used and
spatial information preserved is strongest. We apply this approach to a variety
of simple clustering problems, showing that DIB with our model selection
procedure recovers the generative cluster labels. We also show that, in
particular limits of our model parameters, clustering with DIB and IB is
equivalent to $k$-means and EM fitting of a GMM with hard and soft assignments,
respectively. Thus, clustering with (D)IB generalizes and provides an
information-theoretic perspective on these classic algorithms.
| stat |
Sparse Networks with Core-Periphery Structure | We propose a statistical model for graphs with a core-periphery structure. To
do this we define a precise notion of what it means for a graph to have this
structure, based on the sparsity properties of the subgraphs of core and
periphery nodes. We present a class of sparse graphs with such properties, and
provide methods to simulate from this class, and to perform posterior
inference. We demonstrate that our model can detect core-periphery structure in
simulated and real-world networks.
| stat |
A Practical Introduction to Bayesian Estimation of Causal Effects:
Parametric and Nonparametric Approaches | Substantial advances in Bayesian methods for causal inference have been
developed in recent years. We provide an introduction to Bayesian inference for
causal effects for practicing statisticians who have some familiarity with
Bayesian models and would like an overview of what it can add to causal
estimation in practical settings. In the paper, we demonstrate how priors can
induce shrinkage and sparsity on parametric models and be used to perform
probabilistic sensitivity analyses around causal assumptions. We provide an
overview of nonparametric Bayesian estimation and survey their applications in
the causal inference literature. Inference in the point-treatment and
time-varying treatment settings are considered. For the latter, we explore both
static and dynamic treatment regimes. Throughout, we illustrate implementation
using off-the-shelf open source software. We hope the reader will walk away
with implementation-level knowledge of Bayesian causal inference using both
parametric and nonparametric models. All synthetic examples and code used in
the paper are publicly available on a companion GitHub repository.
| stat |
Retailer response to wholesale stockouts | The purpose of this paper is to identify the immediate and future retailer
response to wholesale stockouts. We perform a statistical analysis of
historical customer order and delivery data of a local tool wholesaler and
distributor, whose customers are retailers, over a period of four years. We
investigate the effect of customer service on the order fill rate and the rate
of future demand, where the customer service is defined in terms of timely
delivery and the fill rate is defined as the fraction of the order that is
eventually materialized, i.e., is not cancelled following a stockout.We find
that for customers who order frequently, stockouts have an adverse effect on
the fill rate of their orders and on the frequency but not the value of their
future demand; however, this latter effect seems to be more short-term than
long-term. Practically all studies on the effects of stockouts measure
immediate reported/intended consumer purchase incidence and choice decision
behavior in response to stockouts in retail environments, mostly based on
surveys. This study looks at how stockouts affect future demand in a wholesale
environment, based on historical behavioral data analysis.
| stat |
A scalable estimate of the extra-sample prediction error via approximate
leave-one-out | The paper considers the problem of out-of-sample risk estimation under the
high dimensional settings where standard techniques such as $K$-fold cross
validation suffer from large biases. Motivated by the low bias of the
leave-one-out cross validation (LO) method, we propose a computationally
efficient closed-form approximate leave-one-out formula (ALO) for a large class
of regularized estimators. Given the regularized estimate, calculating ALO
requires minor computational overhead. With minor assumptions about the data
generating process, we obtain a finite-sample upper bound for $|\text{LO} -
\text{ALO}|$. Our theoretical analysis illustrates that $|\text{LO} -
\text{ALO}| \rightarrow 0$ with overwhelming probability, when $n,p \rightarrow
\infty$, where the dimension $p$ of the feature vectors may be comparable with
or even greater than the number of observations, $n$. Despite the
high-dimensionality of the problem, our theoretical results do not require any
sparsity assumption on the vector of regression coefficients. Our extensive
numerical experiments show that $|\text{LO} - \text{ALO}|$ decreases as $n,p$
increase, revealing the excellent finite sample performance of ALO. We further
illustrate the usefulness of our proposed out-of-sample risk estimation method
by an example of real recordings from spatially sensitive neurons (grid cells)
in the medial entorhinal cortex of a rat.
| stat |
COVID-19: Optimal Allocation of Ventilator Supply under Uncertainty and
Risk | This study presents a new risk-averse multi-stage stochastic
epidemics-ventilator-logistics compartmental model to address the resource
allocation challenges of mitigating COVID-19. This epidemiological logistics
model involves the uncertainty of untested asymptomatic infections and
incorporates short-term human migration. Disease transmission is also
forecasted through a new formulation of transmission rates that evolve over
space and time with respect to various non-pharmaceutical interventions, such
as wearing masks, social distancing, and lockdown. The proposed multi-stage
stochastic model overviews different scenarios on the number of asymptomatic
individuals while optimizing the distribution of resources, such as
ventilators, to minimize the total expected number of newly infected and
deceased people. The Conditional Value at Risk (CVaR) is also incorporated into
the multi-stage mean-risk model to allow for a trade-off between the weighted
expected loss due to the outbreak and the expected risks associated with
experiencing disastrous pandemic scenarios. We apply our multi-stage mean-risk
epidemics-ventilator-logistics model to the case of controlling the COVID-19 in
highly-impacted counties of New York and New Jersey. We calibrate, validate,
and test our model using actual infection, population, and migration data. The
results indicate that short-term migration influences the transmission of the
disease significantly. The optimal number of ventilators allocated to each
region depends on various factors, including the number of initial infections,
disease transmission rates, initial ICU capacity, the population of a
geographical location, and the availability of ventilator supply. Our
data-driven modeling framework can be adapted to study the disease transmission
dynamics and logistics of other similar epidemics and pandemics.
| stat |
Machine learning accelerates parameter optimization and uncertainty
assessment of a land surface model | The performance of land surface models (LSMs) significantly affects the
understanding of atmospheric and related processes. Many of the LSMs' soil and
vegetation parameters were unknown so that it is crucially important to
efficiently optimize them. Here I present a globally applicable and
computationally efficient method for parameter optimization and uncertainty
assessment of the LSM by combining Markov Chain Monte Carlo (MCMC) with machine
learning. First, I performed the long-term (decadal scales) ensemble simulation
of the LSM, in which each ensemble member has different parameters' values, and
calculated the gap between simulation and observation, or the cost function,
for each ensemble member. Second, I developed the statistical machine learning
based surrogate model, which is computationally cheap but accurately mimics the
relationship between parameters and the cost function, by applying the Gaussian
process regression to learn the model simulation. Third, we applied MCMC by
repeatedly driving the surrogate model to get the posterior probabilistic
distribution of parameters. Using satellite passive microwave brightness
temperature observations, both synthetic and real-data experiments in the Sahel
region of west Africa were performed to optimize unknown soil and vegetation
parameters of the LSM. The primary findings are (1) the proposed method is
50,000 times as fast as the direct application of MCMC to the full LSM; (2) the
skill of the LSM to simulate both soil moisture and vegetation dynamics can be
improved; (3) I successfully quantify the characteristics of equifinality by
obtaining the full non-parametric probabilistic distribution of parameters.
| stat |
On the optimality of the Hedge algorithm in the stochastic regime | In this paper, we study the behavior of the Hedge algorithm in the online
stochastic setting. We prove that anytime Hedge with decreasing learning rate,
which is one of the simplest algorithm for the problem of prediction with
expert advice, is surprisingly both worst-case optimal and adaptive to the
easier stochastic and adversarial with a gap problems. This shows that, in
spite of its small, non-adaptive learning rate, Hedge possesses the same
optimal regret guarantee in the stochastic case as recently introduced adaptive
algorithms. Moreover, our analysis exhibits qualitative differences with other
variants of the Hedge algorithm, such as the fixed-horizon version (with
constant learning rate) and the one based on the so-called "doubling trick",
both of which fail to adapt to the easier stochastic setting. Finally, we
discuss the limitations of anytime Hedge and the improvements provided by
second-order regret bounds in the stochastic case.
| stat |
Composite Bayesian inference | We revisit and generalize the concept of composite likelihood as a method to
make a probabilistic inference by aggregation of multiple Bayesian agents,
thereby defining a class of predictive models which we call composite Bayesian.
This perspective gives insight to choose the weights associated with composite
likelihood, either a priori or via learning; in the latter case, they may be
tuned so as to minimize prediction cross-entropy, yielding an easy-to-solve
convex problem. We argue that composite Bayesian inference is a middle way
between generative and discriminative models that trades off between
interpretability and prediction performance, both of which are crucial to many
artificial intelligence tasks.
| stat |
Modeling Cell Populations Measured By Flow Cytometry With Covariates
Using Sparse Mixture of Regressions | The ocean is filled with microscopic microalgae called phytoplankton, which
together are responsible for as much photosynthesis as all plants on land
combined. Our ability to predict their response to the warming ocean relies on
understanding how the dynamics of phytoplankton populations is influenced by
changes in environmental conditions. One powerful technique to study the
dynamics of phytoplankton is flow cytometry, which measures the optical
properties of thousands of individual cells per second. Today, oceanographers
are able to collect flow cytometry data in real-time onboard a moving ship,
providing them with fine-scale resolution of the distribution of phytoplankton
across thousands of kilometers. One of the current challenges is to understand
how these small and large scale variations relate to environmental conditions,
such as nutrient availability, temperature, light and ocean currents. In this
paper, we propose a novel sparse mixture of multivariate regressions model to
estimate the time-varying phytoplankton subpopulations while simultaneously
identifying the specific environmental covariates that are predictive of the
observed changes to these subpopulations. We demonstrate the usefulness and
interpretability of the approach using both synthetic data and real
observations collected on an oceanographic cruise conducted in the north-east
Pacific in the spring of 2017.
| stat |
Frequentist Inference without Repeated Sampling | Frequentist inference typically is described in terms of hypothetical
repeated sampling but there are advantages to an interpretation that uses a
single random sample. Contemporary examples are given that indicate
probabilities for random phenomena are interpreted as classical probabilities,
and this interpretation is applied to statistical inference using urn models.
Both classical and limiting relative frequency interpretations can be used to
communicate statistical inference, and the effectiveness of each is discussed.
Recent descriptions of p-values, confidence intervals, and power are viewed
through the lens of classical probability based on a single random sample from
the population.
| stat |
Learning landmark geodesics using Kalman ensembles | We study the problem of diffeomorphometric geodesic landmark matching where
the objective is to find a diffeomorphism that via its group action maps
between two sets of landmarks. It is well-known that the motion of the
landmarks, and thereby the diffeomorphism, can be encoded by an initial
momentum leading to a formulation where the landmark matching problem can be
solved as an optimisation problem over such momenta. The novelty of our work
lies in the application of a derivative-free Bayesian inverse method for
learning the optimal momentum encoding the diffeomorphic mapping between the
template and the target. The method we apply is the ensemble Kalman filter, an
extension of the Kalman filter to nonlinear observation operators. We describe
an efficient implementation of the algorithm and show several numerical results
for various target shapes.
| stat |
An industry case of large-scale demand forecasting of hierarchical
components | Demand forecasting of hierarchical components is essential in manufacturing.
However, its discussion in the machine-learning literature has been limited,
and judgemental forecasts remain pervasive in the industry. Demand planners
require easy-to-understand tools capable of delivering state-of-the-art
results. This work presents an industry case of demand forecasting at one of
the largest manufacturers of electronics in the world. It seeks to support
practitioners with five contributions: (1) A benchmark of fourteen demand
forecast methods applied to a relevant data set, (2) A data transformation
technique yielding comparable results with state of the art, (3) An alternative
to ARIMA based on matrix factorization, (4) A model selection technique based
on topological data analysis for time series and (5) A novel data set.
Organizations seeking to up-skill existing personnel and increase forecast
accuracy will find value in this work.
| stat |
Empirical Mode Modeling: A data-driven approach to recover and forecast
nonlinear dynamics from noisy data | Data-driven, model-free analytics are natural choices for discovery and
forecasting of complex, nonlinear systems. Methods that operate in the system
state-space require either an explicit multidimensional state-space, or, one
approximated from available observations. Since observational data are
frequently sampled with noise, it is possible that noise can corrupt the
state-space representation degrading analytical performance. Here, we evaluate
the synthesis of empirical mode decomposition with empirical dynamic modeling,
which we term empirical mode modeling, to increase the information content of
state-space representations in the presence of noise. Evaluation of a
mathematical, and, an ecologically important geophysical application across
three different state-space representations suggests that empirical mode
modeling may be a useful technique for data-driven, model-free, state-space
analysis in the presence of noise.
| stat |
A Practical Algorithm for Multiplayer Bandits when Arm Means Vary Among
Players | We study a multiplayer stochastic multi-armed bandit problem in which players
cannot communicate, and if two or more players pull the same arm, a collision
occurs and the involved players receive zero reward. We consider the
challenging heterogeneous setting, in which different arms may have different
means for different players, and propose a new and efficient algorithm that
combines the idea of leveraging forced collisions for implicit communication
and that of performing matching eliminations. We present a finite-time analysis
of our algorithm, giving the first sublinear minimax regret bound for this
problem, and prove that if the optimal assignment of players to arms is unique,
our algorithm attains the optimal $O(\ln(T))$ regret, solving an open question
raised at NeurIPS 2018.
| stat |
Learning Inconsistent Preferences with Kernel Methods | We propose a probabilistic kernel approach for preferential learning from
pairwise duelling data using Gaussian Processes. Different from previous
methods, we do not impose a total order on the item space, hence can capture
more expressive latent preferential structures such as inconsistent preferences
and clusters of comparable items. Furthermore, we prove the universality of the
proposed kernels, i.e. that the corresponding reproducing kernel Hilbert Space
(RKHS) is dense in the space of skew-symmetric preference functions. To
conclude the paper, we provide an extensive set of numerical experiments on
simulated and real-world datasets showcasing the competitiveness of our
proposed method with state-of-the-art.
| stat |
ScoreDrivenModels.jl: a Julia Package for Generalized Autoregressive
Score Models | Score-driven models, also known as generalized autoregressive score models,
represent a class of observation-driven time series models. They possess
powerful properties, such as the ability to model different conditional
distributions and to consider time-varying parameters within a flexible
framework. In this paper, we present ScoreDrivenModels.jl, an open-source Julia
package for modeling, forecasting, and simulating time series using the
framework of score-driven models. The package is flexible with respect to model
definition, allowing the user to specify the lag structure and which parameters
are time-varying or constant. It is also possible to consider several
distributions, including Beta, Exponential, Gamma, Lognormal, Normal, Poisson,
Student's t, and Weibull. The provided interface is flexible, allowing
interested users to implement any desired distribution and parametrization.
| stat |
Risk prediction models for discrete ordinal outcomes: calibration and
the impact of the proportional odds assumption | Calibration is a vital aspect of the performance of risk prediction models,
but research in the context of ordinal outcomes is scarce. This study compared
calibration measures for risk models predicting a discrete ordinal outcome, and
investigated the impact of the proportional odds assumption on calibration and
overfitting. We studied the multinomial, cumulative, adjacent category,
continuation ratio, and stereotype logit/logistic models. To assess
calibration, we investigated calibration intercepts and slopes, calibration
plots, and the estimated calibration index. Using large sample simulations, we
studied the performance of models for risk estimation under various conditions,
assuming that the true model has either a multinomial logistic form or a
cumulative logit proportional odds form. Small sample simulations were used to
compare the tendency for overfitting between models. As a case study, we
developed models to diagnose the degree of coronary artery disease (five
categories) in symptomatic patients. When the true model was multinomial
logistic, proportional odds models often yielded poor risk estimates, with
calibration slopes deviating considerably from unity even on large model
development datasets. The stereotype logistic model improved the calibration
slope, but still provided biased risk estimates for individual patients. When
the true model had a cumulative logit proportional odds form, multinomial
logistic regression provided biased risk estimates, although these biases were
modest. Non-proportional odds models, however, required more parameters to be
estimated from the data, and hence suffered more from overfitting. Despite
larger sample size requirements, we generally recommend multinomial logistic
regression for risk prediction modeling of discrete ordinal outcomes.
| stat |
A new perspective from a Dirichlet model for forecasting outstanding
liabilities of nonlife insurers | Forecasting the outstanding claim liabilities to set adequate reserves is
critical for a nonlife insurer's solvency. Chain-Ladder and
Bornhuetter-Ferguson are two prominent actuarial approaches used for this task.
The selection between the two approaches is often ad hoc due to different
underlying assumptions. We introduce a Dirichlet model that provides a common
statistical framework for the two approaches, with some appealing properties.
Depending on the type of information available, the model inference naturally
leads to either Chain-Ladder or Bornhuetter-Ferguson prediction. Using claims
data on Worker's compensation insurance from several US insurers, we discuss
both frequentist and Bayesian inference.
| stat |
A fast Monte Carlo test for preferential sampling | The preferential sampling of locations chosen to observe a spatio-temporal
process has been identified as a major problem across multiple fields.
Predictions of the process can be severely biased when standard statistical
methodologies are applied to preferentially sampled data without adjustment.
Currently, methods that can adjust for preferential sampling are rarely
implemented in the software packages most popular with researchers.
Furthermore, they are technically demanding to design and fit. This paper
presents a fast and intuitive Monte Carlo test for detecting preferential
sampling. The test can be applied across a wide range of data types.
Importantly, the method can also help with the discovery of a set of
informative covariates that can sufficiently control for the preferential
sampling. The discovery of these covariates can justify continued use of
standard methodologies. A thorough simulation study is presented to demonstrate
both the power and validity of the test in various data settings. The test is
shown to attain high power for non-Gaussian data with sample sizes as low as
50. Finally, two previously-published case studies are revisited and new
insights into the nature of the informative sampling are gained. The test can
be implemented with the R package PStestR
| stat |
InfoBot: Transfer and Exploration via the Information Bottleneck | A central challenge in reinforcement learning is discovering effective
policies for tasks where rewards are sparsely distributed. We postulate that in
the absence of useful reward signals, an effective exploration strategy should
seek out {\it decision states}. These states lie at critical junctions in the
state space from where the agent can transition to new, potentially unexplored
regions. We propose to learn about decision states from prior experience. By
training a goal-conditioned policy with an information bottleneck, we can
identify decision states by examining where the model actually leverages the
goal state. We find that this simple mechanism effectively identifies decision
states, even in partially observed settings. In effect, the model learns the
sensory cues that correlate with potential subgoals. In new environments, this
model can then identify novel subgoals for further exploration, guiding the
agent through a sequence of potential decision states and through new regions
of the state space.
| stat |
A Class of Spatially Correlated Self-Exciting Models | The statistical modeling of multivariate count data observed on a space-time
lattice has generally focused on using a hierarchical modeling approach where
space-time correlation structure is placed on a continuous, latent, process.
The count distribution is then assumed to be conditionally independent given
the latent process. However, in many real-world applications, especially in the
modeling of criminal or terrorism data, the conditional independence between
the count distributions is inappropriate. In this manuscript we propose a class
of models that capture spatial variation and also account for the possibility
of data model dependence. The resulting model allows both data model
dependence, or self-excitation, as well as spatial dependence in a latent
structure. We demonstrate how second-order properties can be used to
characterize the spatio-temporal process and how misspecificaiton of error may
inflate self-excitation in a model. Finally, we give an algorithm for efficient
Bayesian inference for the model demonstrating its use in capturing the
spatio-temporal structure of burglaries in Chicago from 2010-2015.
| stat |
Estimating the Number of Components in Finite Mixture Models via the
Group-Sort-Fuse Procedure | Estimation of the number of components (or order) of a finite mixture model
is a long standing and challenging problem in statistics. We propose the
Group-Sort-Fuse (GSF) procedure---a new penalized likelihood approach for
simultaneous estimation of the order and mixing measure in multidimensional
finite mixture models. Unlike methods which fit and compare mixtures with
varying orders using criteria involving model complexity, our approach directly
penalizes a continuous function of the model parameters. More specifically,
given a conservative upper bound on the order, the GSF groups and sorts mixture
component parameters to fuse those which are redundant. For a wide range of
finite mixture models, we show that the GSF is consistent in estimating the
true mixture order and achieves the $n^{-1/2}$ convergence rate for parameter
estimation up to polylogarithmic factors. The GSF is implemented for several
univariate and multivariate mixture models in the R package GroupSortFuse. Its
finite sample performance is supported by a thorough simulation study, and its
application is illustrated on two real data examples.
| stat |
Fixed-effects model: the most convincing model for meta-analysis with
few studies | According to Davey et al. (2011) with a total of 22,453 meta-analyses from
the January 2008 Issue of the Cochrane Database of Systematic Reviews, the
median number of studies included in each meta-analysis is only three. In other
words, about a half or more of meta-analyses conducted in the literature
include only two or three studies. While the common-effect model (also referred
to as the fixed-effect model) may lead to misleading results when the
heterogeneity among studies is large, the conclusions based on the
random-effects model may also be unreliable when the number of studies is
small. Alternatively, the fixed-effects model avoids the restrictive assumption
in the common-effect model and the need to estimate the between-study variance
in the random-effects model. We note, however, that the fixed-effects model is
under appreciated and rarely used in practice until recently. In this paper, we
compare all three models and demonstrate the usefulness of the fixed-effects
model when the number of studies is small. In addition, we propose a new
estimator for the unweighted average effect in the fixed-effects model.
Simulations and real examples are also used to illustrate the benefits of the
fixed-effects model and the new estimator.
| stat |
Query Training: Learning a Worse Model to Infer Better Marginals in
Undirected Graphical Models with Hidden Variables | Probabilistic graphical models (PGMs) provide a compact representation of
knowledge that can be queried in a flexible way: after learning the parameters
of a graphical model once, new probabilistic queries can be answered at test
time without retraining. However, when using undirected PGMS with hidden
variables, two sources of error typically compound in all but the simplest
models (a) learning error (both computing the partition function and
integrating out the hidden variables is intractable); and (b) prediction error
(exact inference is also intractable). Here we introduce query training (QT), a
mechanism to learn a PGM that is optimized for the approximate inference
algorithm that will be paired with it. The resulting PGM is a worse model of
the data (as measured by the likelihood), but it is tuned to produce better
marginals for a given inference algorithm. Unlike prior works, our approach
preserves the querying flexibility of the original PGM: at test time, we can
estimate the marginal of any variable given any partial evidence. We
demonstrate experimentally that QT can be used to learn a challenging
8-connected grid Markov random field with hidden variables and that it
consistently outperforms the state-of-the-art AdVIL when tested on three
undirected models across multiple datasets.
| stat |
Neural Ordinary Differential Equations on Manifolds | Normalizing flows are a powerful technique for obtaining reparameterizable
samples from complex multimodal distributions. Unfortunately current approaches
fall short when the underlying space has a non trivial topology, and are only
available for the most basic geometries. Recently normalizing flows in
Euclidean space based on Neural ODEs show great promise, yet suffer the same
limitations. Using ideas from differential geometry and geometric control
theory, we describe how neural ODEs can be extended to smooth manifolds. We
show how vector fields provide a general framework for parameterizing a
flexible class of invertible mapping on these spaces and we illustrate how
gradient based learning can be performed. As a result we define a general
methodology for building normalizing flows on manifolds.
| stat |
Determinantal consensus clustering | Random restart of a given algorithm produces many partitions to yield a
consensus clustering. Ensemble methods such as consensus clustering have been
recognized as more robust approaches for data clustering than single clustering
algorithms. We propose the use of determinantal point processes or DPP for the
random restart of clustering algorithms based on initial sets of center points,
such as k-medoids or k-means. The relation between DPP and kernel-based methods
makes DPPs suitable to describe and quantify similarity between objects. DPPs
favor diversity of the center points within subsets. So, subsets with more
similar points have less chances of being generated than subsets with very
distinct points. The current and most popular sampling technique is sampling
center points uniformly at random. We show through extensive simulations that,
contrary to DPP, this technique fails both to ensure diversity, and to obtain a
good coverage of all data facets. These two properties of DPP are key to make
DPPs achieve good performance with small ensembles. Simulations with artificial
datasets and applications to real datasets show that determinantal consensus
clustering outperform classical algorithms such as k-medoids and k-means
consensus clusterings which are based on uniform random sampling of center
points.
| stat |
Structured Latent Factor Analysis for Large-scale Data: Identifiability,
Estimability, and Their Implications | Latent factor models are widely used to measure unobserved latent traits in
social and behavioral sciences, including psychology, education, and marketing.
When used in a confirmatory manner, design information is incorporated,
yielding structured (confirmatory) latent factor models. Motivated by the
applications of latent factor models to large-scale measurements which consist
of many manifest variables (e.g. test items) and a large sample size, we study
the properties of structured latent factor models under an asymptotic setting
where both the number of manifest variables and the sample size grow to
infinity. Specifically, under such an asymptotic regime, we provide a
definition of the structural identifiability of the latent factors and
establish necessary and sufficient conditions on the measurement design that
ensure the structural identifiability under a general family of structured
latent factor models. In addition, we propose an estimator that can
consistently recover the latent factors under mild conditions. This estimator
can be efficiently computed through parallel computing. Our results shed lights
on the design of large-scale measurement and have important implications on
measurement validity. The properties of the proposed estimator are verified
through simulation studies.
| stat |
Bayesian inference using synthetic likelihood: asymptotics and
adjustments | Implementing Bayesian inference is often computationally challenging in
applications involving complex models, and sometimes calculating the likelihood
itself is difficult. Synthetic likelihood is one approach for carrying out
inference when the likelihood is intractable, but it is straightforward to
simulate from the model. The method constructs an approximate likelihood by
taking a vector summary statistic as being multivariate normal, with the
unknown mean and covariance matrix estimated by simulation for any given
parameter value. Our article makes three contributions. The first shows that if
the summary statistic satisfies a central limit theorem, then the synthetic
likelihood posterior is asymptotically normal and yields credible sets with the
correct level of frequentist coverage. This result is similar to that obtained
by approximate Bayesian computation. The second contribution compares the
computational efficiency of Bayesian synthetic likelihood and approximate
Bayesian computation using the acceptance probability for rejection and
importance sampling algorithms with a "good" proposal distribution. We show
that Bayesian synthetic likelihood is computationally more efficient than
approximate Bayesian computation, and behaves similarly to regression-adjusted
approximate Bayesian computation. Based on the asymptotic results, the third
contribution proposes using adjusted inference methods when a possibly
misspecified form is assumed for the covariance matrix of the synthetic
likelihood, such as diagonal or a factor model, to speed up the computation.
The methodology is illustrated with some simulated and real examples.
| stat |
LowCon: A design-based subsampling approach in a misspecified linear
modeL | We consider a measurement constrained supervised learning problem, that is,
(1) full sample of the predictors are given; (2) the response observations are
unavailable and expensive to measure. Thus, it is ideal to select a subsample
of predictor observations, measure the corresponding responses, and then fit
the supervised learning model on the subsample of the predictors and responses.
However, model fitting is a trial and error process, and a postulated model for
the data could be misspecified. Our empirical studies demonstrate that most of
the existing subsampling methods have unsatisfactory performances when the
models are misspecified. In this paper, we develop a novel subsampling method,
called "LowCon", which outperforms the competing methods when the working
linear model is misspecified. Our method uses orthogonal Latin hypercube
designs to achieve a robust estimation. We show that the proposed design-based
estimator approximately minimizes the so-called "worst-case" bias with respect
to many possible misspecification terms. Both the simulated and real-data
analyses demonstrate the proposed estimator is more robust than several
subsample least squares estimators obtained by state-of-the-art subsampling
methods.
| stat |
Causal organic indirect and direct effects: closer to Baron and Kenny,
with a product method for binary mediators | Mediation analysis, which started with Baron and Kenny (1986), is used
extensively by applied researchers. Indirect and direct effects are the part of
a treatment effect that is mediated by a covariate and the part that is not.
Subsequent work on natural indirect and direct effects provides a formal causal
interpretation, based on cross-worlds counterfactuals: outcomes under treatment
with the mediator set to its value without treatment. Organic indirect and
direct effects (Lok 2016) avoid cross-worlds counterfactuals, using so-called
organic interventions on the mediator while keeping the initial treatment fixed
at treatment. Organic indirect and direct effects apply also to settings where
the mediator cannot be set. In linear models where the outcome model does not
have treatment-mediator interaction, both organic and natural indirect and
direct effects lead to the same estimators as in Baron and Kenny (1986). Here,
we generalize organic interventions on the mediator to include interventions
combined with the initial treatment fixed at no treatment. We show that the
product method holds in linear models for organic indirect and direct effects
relative to no treatment even if there is treatment-mediator interaction.
Moreover, we find a product method for binary mediators. Furthermore, we argue
that the organic indirect effect relative to no treatment is very relevant for
drug development. We illustrate the benefits of our approach by estimating the
organic indirect effect of curative HIV-treatments mediated by two
HIV-persistence measures, using ART-interruption data without curative
HIV-treatments combined with an estimated/hypothesized effect of the curative
HIV-treatments on these mediators.
| stat |
MUCE: Bayesian Hierarchical Modeling for the Design and Analysis of
Phase 1b Multiple Expansion Cohort Trials | We propose a multiple cohort expansion (MUCE) approach as a design or
analysis method for phase 1b multiple expansion cohort trials, which are novel
first-in-human studies conducted following phase 1a dose escalation. The MUCE
design is based on a class of Bayesian hierarchical models that adaptively
borrow information across arms. Statistical inference is directly based on the
posterior probability of each arm being efficacious, facilitating the decision
making that decides which arm to select for further testing.
| stat |
Manifold Fitting under Unbounded Noise | There has been an emerging trend in non-Euclidean dimension reduction of
aiming to recover a low dimensional structure, namely a manifold, underlying
the high dimensional data. Recovering the manifold requires the noise to be of
certain concentration. Existing methods address this problem by constructing an
output manifold based on the tangent space estimation at each sample point.
Although theoretical convergence for these methods is guaranteed, either the
samples are noiseless or the noise is bounded. However, if the noise is
unbounded, which is a common scenario, the tangent space estimation of the
noisy samples will be blurred, thereby breaking the manifold fitting. In this
paper, we introduce a new manifold-fitting method, by which the output manifold
is constructed by directly estimating the tangent spaces at the projected
points on the underlying manifold, rather than at the sample points, to
decrease the error caused by the noise. Our new method provides theoretical
convergence, in terms of the upper bound on the Hausdorff distance between the
output and underlying manifold and the lower bound on the reach of the output
manifold, when the noise is unbounded. Numerical simulations are provided to
validate our theoretical findings and demonstrate the advantages of our method
over other relevant methods. Finally, our method is applied to real data
examples.
| stat |
Subsets and Splits
No saved queries yet
Save your SQL queries to embed, download, and access them later. Queries will appear here once saved.